[PATCH -next] clk: qcom: clk-rpm: remove unused code

[PATCH -next] clk: qcom: clk-rpm: remove unused code

[YueHaibing]

drivers/clk/qcom/clk-rpm.c:453:29: warning:
 clk_rpm_branch_ops defined but not used [-Wunused-const-variable=]

It is never used, also the macros 'DEFINE_CLK_RPM_CXO_BRANCH'
and 'DEFINE_CLK_RPM_CXO_BRANCH' are unused, so remove them.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
---
 drivers/clk/qcom/clk-rpm.c | 63 ----------------------------------------------
 1 file changed, 63 deletions(-)

diff --git a/drivers/clk/qcom/clk-rpm.c b/drivers/clk/qcom/clk-rpm.c
index 9e3110a..c3430e2 100644
--- a/drivers/clk/qcom/clk-rpm.c
+++ b/drivers/clk/qcom/clk-rpm.c
@@ -73,62 +73,6 @@
 		},							      \
 	}
 
-#define DEFINE_CLK_RPM_PXO_BRANCH(_platform, _name, _active, r_id, r)	      \
-	static struct clk_rpm _platform##_##_active;			      \
-	static struct clk_rpm _platform##_##_name = {			      \
-		.rpm_clk_id = (r_id),					      \
-		.active_only = true,					      \
-		.peer = &_platform##_##_active,				      \
-		.rate = (r),						      \
-		.branch = true,						      \
-		.hw.init = &(struct clk_init_data){			      \
-			.ops = &clk_rpm_branch_ops,			      \
-			.name = #_name,					      \
-			.parent_names = (const char *[]){ "pxo_board" },      \
-			.num_parents = 1,				      \
-		},							      \
-	};								      \
-	static struct clk_rpm _platform##_##_active = {			      \
-		.rpm_clk_id = (r_id),					      \
-		.peer = &_platform##_##_name,				      \
-		.rate = (r),						      \
-		.branch = true,						      \
-		.hw.init = &(struct clk_init_data){			      \
-			.ops = &clk_rpm_branch_ops,			      \
-			.name = #_active,				      \
-			.parent_names = (const char *[]){ "pxo_board" },      \
-			.num_parents = 1,				      \
-		},							      \
-	}
-
-#define DEFINE_CLK_RPM_CXO_BRANCH(_platform, _name, _active, r_id, r)	      \
-	static struct clk_rpm _platform##_##_active;			      \
-	static struct clk_rpm _platform##_##_name = {			      \
-		.rpm_clk_id = (r_id),					      \
-		.peer = &_platform##_##_active,				      \
-		.rate = (r),						      \
-		.branch = true,						      \
-		.hw.init = &(struct clk_init_data){			      \
-			.ops = &clk_rpm_branch_ops,			      \
-			.name = #_name,					      \
-			.parent_names = (const char *[]){ "cxo_board" },      \
-			.num_parents = 1,				      \
-		},							      \
-	};								      \
-	static struct clk_rpm _platform##_##_active = {			      \
-		.rpm_clk_id = (r_id),					      \
-		.active_only = true,					      \
-		.peer = &_platform##_##_name,				      \
-		.rate = (r),						      \
-		.branch = true,						      \
-		.hw.init = &(struct clk_init_data){			      \
-			.ops = &clk_rpm_branch_ops,			      \
-			.name = #_active,				      \
-			.parent_names = (const char *[]){ "cxo_board" },      \
-			.num_parents = 1,				      \
-		},							      \
-	}
-
 #define to_clk_rpm(_hw) container_of(_hw, struct clk_rpm, hw)
 
 struct rpm_cc;
@@ -450,13 +394,6 @@ static const struct clk_ops clk_rpm_ops = {
 	.recalc_rate	= clk_rpm_recalc_rate,
 };
 
-static const struct clk_ops clk_rpm_branch_ops = {
-	.prepare	= clk_rpm_prepare,
-	.unprepare	= clk_rpm_unprepare,
-	.round_rate	= clk_rpm_round_rate,
-	.recalc_rate	= clk_rpm_recalc_rate,
-};
-
 /* MSM8660/APQ8060 */
 DEFINE_CLK_RPM(msm8660, afab_clk, afab_a_clk, QCOM_RPM_APPS_FABRIC_CLK);
 DEFINE_CLK_RPM(msm8660, sfab_clk, sfab_a_clk, QCOM_RPM_SYS_FABRIC_CLK);
-- 
2.7.4

Re: [PATCH -next] clk: qcom: clk-rpm: remove unused code

[Stephen Boyd]

Quoting YueHaibing (2019-08-16 06:59:44)
> drivers/clk/qcom/clk-rpm.c:453:29: warning:
>  clk_rpm_branch_ops defined but not used [-Wunused-const-variable=]
> 
> It is never used, also the macros 'DEFINE_CLK_RPM_CXO_BRANCH'
> and 'DEFINE_CLK_RPM_CXO_BRANCH' are unused, so remove them.
> 
> Reported-by: Hulk Robot <hulkci@huawei.com>
> Signed-off-by: YueHaibing <yuehaibing@huawei.com>
> ---

Sorry, apparently we're leaving this code around for qcom folks to use
one day.