All of lore.kernel.org
 help / color / mirror / Atom feed
From: Niklas Cassel <niklas.cassel@linaro.org>
To: Vinod Koul <vkoul@kernel.org>
Cc: Andy Gross <agross@kernel.org>,
	linux-arm-msm@vger.kernel.org,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Sibi Sankar <sibis@codeaurora.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 6/8] arm64: dts: qcom: sm8150-mtp: Add regulators
Date: Tue, 20 Aug 2019 14:26:04 +0200	[thread overview]
Message-ID: <20190820122604.GA31261@centauri> (raw)
In-Reply-To: <20190820064216.8629-7-vkoul@kernel.org>

On Tue, Aug 20, 2019 at 12:12:14PM +0530, Vinod Koul wrote:
> Add the regulators found in the mtp platform. This platform consists of
> pmic PM8150, PM8150L and PM8009.

Is there a reason not to squash this this patch 5/8 ?

> 
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> ---
>  arch/arm64/boot/dts/qcom/sm8150-mtp.dts | 327 ++++++++++++++++++++++++
>  1 file changed, 327 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
> index 80b15f4f07c8..0513b24496f6 100644
> --- a/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
> @@ -4,6 +4,7 @@
>  
>  /dts-v1/;
>  
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
>  #include "sm8150.dtsi"
>  #include "pm8150.dtsi"
>  #include "pm8150b.dtsi"
> @@ -20,6 +21,332 @@
>  	chosen {
>  		stdout-path = "serial0:115200n8";
>  	};
> +
> +	vph_pwr: vph-pwr-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vph_pwr";
> +		regulator-min-microvolt = <3700000>;
> +		regulator-max-microvolt = <3700000>;
> +	};
> +
> +	/*
> +	 * Apparently RPMh does not provide support for PM8150 S4 because it
> +	 * is always-on; model it as a fixed regulator.
> +	 */
> +	vreg_s4a_1p8: pm8150-s4 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vreg_s4a_1p8";
> +
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +
> +		regulator-always-on;
> +		regulator-boot-on;
> +
> +		vin-supply = <&vph_pwr>;
> +	};
> +};
> +
> +&apps_rsc {
> +	pm8150-rpmh-regulators {
> +		compatible = "qcom,pm8150-rpmh-regulators";
> +		qcom,pmic-id = "a";
> +
> +		vdd-s1-supply = <&vph_pwr>;
> +		vdd-s2-supply = <&vph_pwr>;
> +		vdd-s3-supply = <&vph_pwr>;
> +		vdd-s4-supply = <&vph_pwr>;
> +		vdd-s5-supply = <&vph_pwr>;
> +		vdd-s6-supply = <&vph_pwr>;
> +		vdd-s7-supply = <&vph_pwr>;
> +		vdd-s8-supply = <&vph_pwr>;
> +		vdd-s9-supply = <&vph_pwr>;
> +		vdd-s10-supply = <&vph_pwr>;
> +
> +		vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
> +		vdd-l2-l10-supply = <&vreg_bob>;
> +		vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>;
> +		vdd-l6-l9-supply = <&vreg_s8c_1p3>;
> +		vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>;
> +		vdd-l13-l16-l17-supply = <&vreg_bob>;
> +
> +		vreg_s5a_2p0: smps5 {
> +			regulator-min-microvolt = <1904000>;
> +			regulator-max-microvolt = <2000000>;
> +		};
> +
> +		vreg_s6a_0p9: smps6 {
> +			regulator-min-microvolt = <920000>;
> +			regulator-max-microvolt = <1128000>;
> +		};
> +
> +		vdda_wcss_pll:
> +		vreg_l1a_0p75: ldo1 {
> +			regulator-min-microvolt = <752000>;
> +			regulator-max-microvolt = <752000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vdd_pdphy:
> +		vdda_usb_hs_3p1:
> +		vreg_l2a_3p1: ldo2 {
> +			regulator-min-microvolt = <3072000>;
> +			regulator-max-microvolt = <3072000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l3a_0p8: ldo3 {
> +			regulator-min-microvolt = <480000>;
> +			regulator-max-microvolt = <932000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vdd_usb_hs_core:
> +		vdda_csi_0_0p9:
> +		vdda_csi_1_0p9:
> +		vdda_csi_2_0p9:
> +		vdda_csi_3_0p9:
> +		vdda_dsi_0_0p9:
> +		vdda_dsi_1_0p9:
> +		vdda_dsi_0_pll_0p9:
> +		vdda_dsi_1_pll_0p9:
> +		vdda_pcie_1ln_core:
> +		vdda_pcie_2ln_core:
> +		vdda_pll_hv_cc_ebi01:
> +		vdda_pll_hv_cc_ebi23:
> +		vdda_qrefs_0p875_5:
> +		vdda_sp_sensor:
> +		vdda_ufs_2ln_core_1:
> +		vdda_ufs_2ln_core_2:
> +		vdda_usb_ss_dp_core_1:
> +		vdda_usb_ss_dp_core_2:
> +		vdda_qlink_lv:
> +		vdda_qlink_lv_ck:
> +		vreg_l5a_0p875: ldo5 {
> +			regulator-min-microvolt = <880000>;
> +			regulator-max-microvolt = <880000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l6a_1p2: ldo6 {
> +			regulator-min-microvolt = <1200000>;
> +			regulator-max-microvolt = <1200000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l7a_1p8: ldo7 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vddpx_10:
> +		vreg_l9a_1p2: ldo9 {
> +			regulator-min-microvolt = <1200000>;
> +			regulator-max-microvolt = <1200000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +
> +		vreg_l10a_2p5: ldo10 {
> +			regulator-min-microvolt = <2504000>;
> +			regulator-max-microvolt = <2960000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l11a_0p8: ldo11 {
> +			regulator-min-microvolt = <800000>;
> +			regulator-max-microvolt = <800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vdd_qfprom:
> +		vdd_qfprom_sp:
> +		vdda_apc_cs_1p8:
> +		vdda_gfx_cs_1p8:
> +		vdda_usb_hs_1p8:
> +		vdda_qrefs_vref_1p8:
> +		vddpx_10_a:
> +		vreg_l12a_1p8: ldo12 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l13a_2p7: ldo13 {
> +			regulator-min-microvolt = <2704000>;
> +			regulator-max-microvolt = <2704000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l14a_1p8: ldo14 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1880000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l15a_1p7: ldo15 {
> +			regulator-min-microvolt = <1704000>;
> +			regulator-max-microvolt = <1704000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l16a_2p7: ldo16 {
> +			regulator-min-microvolt = <2704000>;
> +			regulator-max-microvolt = <2960000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l17a_3p0: ldo17 {
> +			regulator-min-microvolt = <2856000>;
> +			regulator-max-microvolt = <3008000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +	};
> +
> +	pm8150l-rpmh-regulators {
> +		compatible = "qcom,pm8150l-rpmh-regulators";
> +		qcom,pmic-id = "c";
> +
> +		vdd-s1-supply = <&vph_pwr>;
> +		vdd-s2-supply = <&vph_pwr>;
> +		vdd-s3-supply = <&vph_pwr>;
> +		vdd-s4-supply = <&vph_pwr>;
> +		vdd-s5-supply = <&vph_pwr>;
> +		vdd-s6-supply = <&vph_pwr>;
> +		vdd-s7-supply = <&vph_pwr>;
> +		vdd-s8-supply = <&vph_pwr>;
> +
> +		vdd-l1-l8-supply = <&vreg_s4a_1p8>;
> +		vdd-l2-l3-supply = <&vreg_s8c_1p3>;
> +		vdd-l4-l5-l6-supply = <&vreg_bob>;
> +		vdd-l7-l11-supply = <&vreg_bob>;
> +		vdd-l9-l10-supply = <&vreg_bob>;
> +
> +		vdd-bob-supply = <&vph_pwr>;
> +		vdd-flash-supply = <&vreg_bob>;
> +		vdd-rgb-supply = <&vreg_bob>;
> +
> +		vreg_bob: bob {
> +			regulator-min-microvolt = <3008000>;
> +			regulator-max-microvolt = <4000000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
> +			regulator-allow-bypass;
> +		};
> +
> +		vreg_s8c_1p3: smps8 {
> +			regulator-min-microvolt = <1352000>;
> +			regulator-max-microvolt = <1352000>;
> +		};
> +
> +		vreg_l1c_1p8: ldo1 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vdda_wcss_adcdac_1:
> +		vdda_wcss_adcdac_22:
> +		vreg_l2c_1p3: ldo2 {
> +			regulator-min-microvolt = <1304000>;
> +			regulator-max-microvolt = <1304000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vdda_hv_ebi0:
> +		vdda_hv_ebi1:
> +		vdda_hv_ebi2:
> +		vdda_hv_ebi3:
> +		vdda_hv_refgen0:
> +		vdda_qlink_hv_ck:
> +		vreg_l3c_1p2: ldo3 {
> +			regulator-min-microvolt = <1200000>;
> +			regulator-max-microvolt = <1200000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vddpx_5:
> +		vreg_l4c_1p8: ldo4 {
> +			regulator-min-microvolt = <1704000>;
> +			regulator-max-microvolt = <2928000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vddpx_6:
> +		vreg_l5c_1p8: ldo5 {
> +			regulator-min-microvolt = <1704000>;
> +			regulator-max-microvolt = <2928000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vddpx_2:
> +		vreg_l6c_2p9: ldo6 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <2960000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l7c_3p0: ldo7 {
> +			regulator-min-microvolt = <2856000>;
> +			regulator-max-microvolt = <3104000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l8c_1p8: ldo8 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l9c_2p9: ldo9 {
> +			regulator-min-microvolt = <2704000>;
> +			regulator-max-microvolt = <2960000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +
> +		vreg_l10c_3p3: ldo10 {
> +			regulator-min-microvolt = <3000000>;
> +			regulator-max-microvolt = <3312000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l11c_3p3: ldo11 {
> +			regulator-min-microvolt = <3000000>;
> +			regulator-max-microvolt = <3312000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +	};
> +
> +	pm8009-rpmh-regulators {
> +		compatible = "qcom,pm8009-rpmh-regulators";
> +		qcom,pmic-id = "f";
> +
> +		vdd-s1-supply = <&vph_pwr>;
> +		vdd-s2-supply = <&vreg_bob>;
> +
> +		vdd-l2-supply = <&vreg_s8c_1p3>;
> +		vdd-l5-l6-supply = <&vreg_bob>;
> +
> +		vreg_l2f_1p2: ldo2 {
> +			regulator-min-microvolt = <1200000>;
> +			regulator-max-microvolt = <1200000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l5f_2p85: ldo5 {
> +			regulator-min-microvolt = <2800000>;
> +			regulator-max-microvolt = <2800000>;
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +		};
> +
> +		vreg_l6f_2p85: ldo6 {
> +			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> +			regulator-min-microvolt = <2856000>;
> +			regulator-max-microvolt = <2856000>;
> +		};
> +	};
> +
>  };
>  
>  &qupv3_id_1 {
> -- 
> 2.20.1
> 

  reply	other threads:[~2019-08-20 12:26 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-20  6:42 [PATCH v2 0/8] arm64: dts: qcom: sm8150: Add SM8150 DTS Vinod Koul
2019-08-20  6:42 ` [PATCH v2 1/8] arm64: dts: qcom: sm8150: add base dts file Vinod Koul
2019-08-20 12:27   ` Niklas Cassel
2019-08-20 12:33     ` Vinod Koul
2019-08-20 13:33   ` Amit Kucheria
2019-08-20 13:33     ` Amit Kucheria
2019-08-20 16:37     ` Vinod Koul
2019-08-20 16:37       ` Vinod Koul
2019-08-20  6:42 ` [PATCH v2 2/8] arm64: dts: qcom: pm8150: Add Base DTS file Vinod Koul
2019-08-20 12:27   ` Niklas Cassel
2019-08-20 12:34     ` Vinod Koul
2019-08-20  6:42 ` [PATCH v2 3/8] arm64: dts: qcom: pm8150b: " Vinod Koul
2019-08-20 12:27   ` Niklas Cassel
2019-08-20 12:35     ` Vinod Koul
2019-08-20  6:42 ` [PATCH v2 4/8] arm64: dts: qcom: pm8150l: " Vinod Koul
2019-08-20  6:42 ` [PATCH v2 5/8] arm64: dts: qcom: sm8150-mtp: add base dts file Vinod Koul
2019-08-20 12:26   ` Niklas Cassel
2019-08-20 12:36     ` Vinod Koul
2019-08-20  6:42 ` [PATCH v2 6/8] arm64: dts: qcom: sm8150-mtp: Add regulators Vinod Koul
2019-08-20 12:26   ` Niklas Cassel [this message]
2019-08-20 12:37     ` Vinod Koul
2019-08-20  6:42 ` [PATCH v2 7/8] arm64: dts: qcom: sm8150: Add reserved-memory regions Vinod Koul
2019-08-20 12:24   ` Niklas Cassel
2019-08-20  6:42 ` [PATCH v2 8/8] arm64: dts: qcom: sm8150: Add apps shared nodes Vinod Koul
2019-08-20 12:28 ` [PATCH v2 0/8] arm64: dts: qcom: sm8150: Add SM8150 DTS Niklas Cassel
2019-08-20 12:39   ` Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190820122604.GA31261@centauri \
    --to=niklas.cassel@linaro.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=sibis@codeaurora.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.