From: Lubomir Rintel <lkundrak@v3.sk>
To: "To : Olof Johansson" <olof@lixom.net>
Cc: "Cc : Rob Herring" <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Thomas Gleixner <tglx@linutronix.de>,
Jason Cooper <jason@lakedaemon.net>,
Kishon Vijay Abraham I <kishon@ti.com>,
Russell King <linux@armlinux.org.uk>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org,
Lubomir Rintel <lkundrak@v3.sk>
Subject: [PATCH v3 14/16] ARM: mmp: remove MMP3 USB PHY registers from regs-usb.h
Date: Sat, 31 Aug 2019 00:07:41 +0200 [thread overview]
Message-ID: <20190830220743.439670-15-lkundrak@v3.sk> (raw)
In-Reply-To: <20190830220743.439670-1-lkundrak@v3.sk>
Nothing in mach-mmp/ uses them and they belong to the PHY driver.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
arch/arm/mach-mmp/regs-usb.h | 94 ------------------------------------
1 file changed, 94 deletions(-)
diff --git a/arch/arm/mach-mmp/regs-usb.h b/arch/arm/mach-mmp/regs-usb.h
index d9f08c1601542..ed0d1aa0ad6c9 100644
--- a/arch/arm/mach-mmp/regs-usb.h
+++ b/arch/arm/mach-mmp/regs-usb.h
@@ -121,100 +121,6 @@
#define UTMI_OTG_ADDON_OTG_ON (1 << 0)
-/* For MMP3 USB Phy */
-#define USB2_PLL_REG0 0x4
-#define USB2_PLL_REG1 0x8
-#define USB2_TX_REG0 0x10
-#define USB2_TX_REG1 0x14
-#define USB2_TX_REG2 0x18
-#define USB2_RX_REG0 0x20
-#define USB2_RX_REG1 0x24
-#define USB2_RX_REG2 0x28
-#define USB2_ANA_REG0 0x30
-#define USB2_ANA_REG1 0x34
-#define USB2_ANA_REG2 0x38
-#define USB2_DIG_REG0 0x3C
-#define USB2_DIG_REG1 0x40
-#define USB2_DIG_REG2 0x44
-#define USB2_DIG_REG3 0x48
-#define USB2_TEST_REG0 0x4C
-#define USB2_TEST_REG1 0x50
-#define USB2_TEST_REG2 0x54
-#define USB2_CHARGER_REG0 0x58
-#define USB2_OTG_REG0 0x5C
-#define USB2_PHY_MON0 0x60
-#define USB2_RESETVE_REG0 0x64
-#define USB2_ICID_REG0 0x78
-#define USB2_ICID_REG1 0x7C
-
-/* USB2_PLL_REG0 */
-/* This is for Ax stepping */
-#define USB2_PLL_FBDIV_SHIFT_MMP3 0
-#define USB2_PLL_FBDIV_MASK_MMP3 (0xFF << 0)
-
-#define USB2_PLL_REFDIV_SHIFT_MMP3 8
-#define USB2_PLL_REFDIV_MASK_MMP3 (0xF << 8)
-
-#define USB2_PLL_VDD12_SHIFT_MMP3 12
-#define USB2_PLL_VDD18_SHIFT_MMP3 14
-
-/* This is for B0 stepping */
-#define USB2_PLL_FBDIV_SHIFT_MMP3_B0 0
-#define USB2_PLL_REFDIV_SHIFT_MMP3_B0 9
-#define USB2_PLL_VDD18_SHIFT_MMP3_B0 14
-#define USB2_PLL_FBDIV_MASK_MMP3_B0 0x01FF
-#define USB2_PLL_REFDIV_MASK_MMP3_B0 0x3E00
-
-#define USB2_PLL_CAL12_SHIFT_MMP3 0
-#define USB2_PLL_CALI12_MASK_MMP3 (0x3 << 0)
-
-#define USB2_PLL_VCOCAL_START_SHIFT_MMP3 2
-
-#define USB2_PLL_KVCO_SHIFT_MMP3 4
-#define USB2_PLL_KVCO_MASK_MMP3 (0x7<<4)
-
-#define USB2_PLL_ICP_SHIFT_MMP3 8
-#define USB2_PLL_ICP_MASK_MMP3 (0x7<<8)
-
-#define USB2_PLL_LOCK_BYPASS_SHIFT_MMP3 12
-
-#define USB2_PLL_PU_PLL_SHIFT_MMP3 13
-#define USB2_PLL_PU_PLL_MASK (0x1 << 13)
-
-#define USB2_PLL_READY_MASK_MMP3 (0x1 << 15)
-
-/* USB2_TX_REG0 */
-#define USB2_TX_IMPCAL_VTH_SHIFT_MMP3 8
-#define USB2_TX_IMPCAL_VTH_MASK_MMP3 (0x7 << 8)
-
-#define USB2_TX_RCAL_START_SHIFT_MMP3 13
-
-/* USB2_TX_REG1 */
-#define USB2_TX_CK60_PHSEL_SHIFT_MMP3 0
-#define USB2_TX_CK60_PHSEL_MASK_MMP3 (0xf << 0)
-
-#define USB2_TX_AMP_SHIFT_MMP3 4
-#define USB2_TX_AMP_MASK_MMP3 (0x7 << 4)
-
-#define USB2_TX_VDD12_SHIFT_MMP3 8
-#define USB2_TX_VDD12_MASK_MMP3 (0x3 << 8)
-
-/* USB2_TX_REG2 */
-#define USB2_TX_DRV_SLEWRATE_SHIFT 10
-
-/* USB2_RX_REG0 */
-#define USB2_RX_SQ_THRESH_SHIFT_MMP3 4
-#define USB2_RX_SQ_THRESH_MASK_MMP3 (0xf << 4)
-
-#define USB2_RX_SQ_LENGTH_SHIFT_MMP3 10
-#define USB2_RX_SQ_LENGTH_MASK_MMP3 (0x3 << 10)
-
-/* USB2_ANA_REG1*/
-#define USB2_ANA_PU_ANA_SHIFT_MMP3 14
-
-/* USB2_OTG_REG0 */
-#define USB2_OTG_PU_OTG_SHIFT_MMP3 3
-
/* fsic registers */
#define FSIC_MISC 0x4
#define FSIC_INT 0x28
--
2.21.0
WARNING: multiple messages have this Message-ID (diff)
From: Lubomir Rintel <lkundrak@v3.sk>
To: "To : Olof Johansson" <olof@lixom.net>
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org, Jason Cooper <jason@lakedaemon.net>,
Stephen Boyd <sboyd@kernel.org>,
linux-kernel@vger.kernel.org,
Michael Turquette <mturquette@baylibre.com>,
Russell King <linux@armlinux.org.uk>,
Kishon Vijay Abraham I <kishon@ti.com>,
Lubomir Rintel <lkundrak@v3.sk>,
"Cc : Rob Herring" <robh+dt@kernel.org>,
Thomas Gleixner <tglx@linutronix.de>,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 14/16] ARM: mmp: remove MMP3 USB PHY registers from regs-usb.h
Date: Sat, 31 Aug 2019 00:07:41 +0200 [thread overview]
Message-ID: <20190830220743.439670-15-lkundrak@v3.sk> (raw)
In-Reply-To: <20190830220743.439670-1-lkundrak@v3.sk>
Nothing in mach-mmp/ uses them and they belong to the PHY driver.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
arch/arm/mach-mmp/regs-usb.h | 94 ------------------------------------
1 file changed, 94 deletions(-)
diff --git a/arch/arm/mach-mmp/regs-usb.h b/arch/arm/mach-mmp/regs-usb.h
index d9f08c1601542..ed0d1aa0ad6c9 100644
--- a/arch/arm/mach-mmp/regs-usb.h
+++ b/arch/arm/mach-mmp/regs-usb.h
@@ -121,100 +121,6 @@
#define UTMI_OTG_ADDON_OTG_ON (1 << 0)
-/* For MMP3 USB Phy */
-#define USB2_PLL_REG0 0x4
-#define USB2_PLL_REG1 0x8
-#define USB2_TX_REG0 0x10
-#define USB2_TX_REG1 0x14
-#define USB2_TX_REG2 0x18
-#define USB2_RX_REG0 0x20
-#define USB2_RX_REG1 0x24
-#define USB2_RX_REG2 0x28
-#define USB2_ANA_REG0 0x30
-#define USB2_ANA_REG1 0x34
-#define USB2_ANA_REG2 0x38
-#define USB2_DIG_REG0 0x3C
-#define USB2_DIG_REG1 0x40
-#define USB2_DIG_REG2 0x44
-#define USB2_DIG_REG3 0x48
-#define USB2_TEST_REG0 0x4C
-#define USB2_TEST_REG1 0x50
-#define USB2_TEST_REG2 0x54
-#define USB2_CHARGER_REG0 0x58
-#define USB2_OTG_REG0 0x5C
-#define USB2_PHY_MON0 0x60
-#define USB2_RESETVE_REG0 0x64
-#define USB2_ICID_REG0 0x78
-#define USB2_ICID_REG1 0x7C
-
-/* USB2_PLL_REG0 */
-/* This is for Ax stepping */
-#define USB2_PLL_FBDIV_SHIFT_MMP3 0
-#define USB2_PLL_FBDIV_MASK_MMP3 (0xFF << 0)
-
-#define USB2_PLL_REFDIV_SHIFT_MMP3 8
-#define USB2_PLL_REFDIV_MASK_MMP3 (0xF << 8)
-
-#define USB2_PLL_VDD12_SHIFT_MMP3 12
-#define USB2_PLL_VDD18_SHIFT_MMP3 14
-
-/* This is for B0 stepping */
-#define USB2_PLL_FBDIV_SHIFT_MMP3_B0 0
-#define USB2_PLL_REFDIV_SHIFT_MMP3_B0 9
-#define USB2_PLL_VDD18_SHIFT_MMP3_B0 14
-#define USB2_PLL_FBDIV_MASK_MMP3_B0 0x01FF
-#define USB2_PLL_REFDIV_MASK_MMP3_B0 0x3E00
-
-#define USB2_PLL_CAL12_SHIFT_MMP3 0
-#define USB2_PLL_CALI12_MASK_MMP3 (0x3 << 0)
-
-#define USB2_PLL_VCOCAL_START_SHIFT_MMP3 2
-
-#define USB2_PLL_KVCO_SHIFT_MMP3 4
-#define USB2_PLL_KVCO_MASK_MMP3 (0x7<<4)
-
-#define USB2_PLL_ICP_SHIFT_MMP3 8
-#define USB2_PLL_ICP_MASK_MMP3 (0x7<<8)
-
-#define USB2_PLL_LOCK_BYPASS_SHIFT_MMP3 12
-
-#define USB2_PLL_PU_PLL_SHIFT_MMP3 13
-#define USB2_PLL_PU_PLL_MASK (0x1 << 13)
-
-#define USB2_PLL_READY_MASK_MMP3 (0x1 << 15)
-
-/* USB2_TX_REG0 */
-#define USB2_TX_IMPCAL_VTH_SHIFT_MMP3 8
-#define USB2_TX_IMPCAL_VTH_MASK_MMP3 (0x7 << 8)
-
-#define USB2_TX_RCAL_START_SHIFT_MMP3 13
-
-/* USB2_TX_REG1 */
-#define USB2_TX_CK60_PHSEL_SHIFT_MMP3 0
-#define USB2_TX_CK60_PHSEL_MASK_MMP3 (0xf << 0)
-
-#define USB2_TX_AMP_SHIFT_MMP3 4
-#define USB2_TX_AMP_MASK_MMP3 (0x7 << 4)
-
-#define USB2_TX_VDD12_SHIFT_MMP3 8
-#define USB2_TX_VDD12_MASK_MMP3 (0x3 << 8)
-
-/* USB2_TX_REG2 */
-#define USB2_TX_DRV_SLEWRATE_SHIFT 10
-
-/* USB2_RX_REG0 */
-#define USB2_RX_SQ_THRESH_SHIFT_MMP3 4
-#define USB2_RX_SQ_THRESH_MASK_MMP3 (0xf << 4)
-
-#define USB2_RX_SQ_LENGTH_SHIFT_MMP3 10
-#define USB2_RX_SQ_LENGTH_MASK_MMP3 (0x3 << 10)
-
-/* USB2_ANA_REG1*/
-#define USB2_ANA_PU_ANA_SHIFT_MMP3 14
-
-/* USB2_OTG_REG0 */
-#define USB2_OTG_PU_OTG_SHIFT_MMP3 3
-
/* fsic registers */
#define FSIC_MISC 0x4
#define FSIC_INT 0x28
--
2.21.0
WARNING: multiple messages have this Message-ID (diff)
From: Lubomir Rintel <lkundrak@v3.sk>
To: "To : Olof Johansson" <olof@lixom.net>
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org, Jason Cooper <jason@lakedaemon.net>,
Stephen Boyd <sboyd@kernel.org>,
linux-kernel@vger.kernel.org,
Michael Turquette <mturquette@baylibre.com>,
Russell King <linux@armlinux.org.uk>,
Kishon Vijay Abraham I <kishon@ti.com>,
Lubomir Rintel <lkundrak@v3.sk>,
"Cc : Rob Herring" <robh+dt@kernel.org>,
Thomas Gleixner <tglx@linutronix.de>,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 14/16] ARM: mmp: remove MMP3 USB PHY registers from regs-usb.h
Date: Sat, 31 Aug 2019 00:07:41 +0200 [thread overview]
Message-ID: <20190830220743.439670-15-lkundrak@v3.sk> (raw)
In-Reply-To: <20190830220743.439670-1-lkundrak@v3.sk>
Nothing in mach-mmp/ uses them and they belong to the PHY driver.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
arch/arm/mach-mmp/regs-usb.h | 94 ------------------------------------
1 file changed, 94 deletions(-)
diff --git a/arch/arm/mach-mmp/regs-usb.h b/arch/arm/mach-mmp/regs-usb.h
index d9f08c1601542..ed0d1aa0ad6c9 100644
--- a/arch/arm/mach-mmp/regs-usb.h
+++ b/arch/arm/mach-mmp/regs-usb.h
@@ -121,100 +121,6 @@
#define UTMI_OTG_ADDON_OTG_ON (1 << 0)
-/* For MMP3 USB Phy */
-#define USB2_PLL_REG0 0x4
-#define USB2_PLL_REG1 0x8
-#define USB2_TX_REG0 0x10
-#define USB2_TX_REG1 0x14
-#define USB2_TX_REG2 0x18
-#define USB2_RX_REG0 0x20
-#define USB2_RX_REG1 0x24
-#define USB2_RX_REG2 0x28
-#define USB2_ANA_REG0 0x30
-#define USB2_ANA_REG1 0x34
-#define USB2_ANA_REG2 0x38
-#define USB2_DIG_REG0 0x3C
-#define USB2_DIG_REG1 0x40
-#define USB2_DIG_REG2 0x44
-#define USB2_DIG_REG3 0x48
-#define USB2_TEST_REG0 0x4C
-#define USB2_TEST_REG1 0x50
-#define USB2_TEST_REG2 0x54
-#define USB2_CHARGER_REG0 0x58
-#define USB2_OTG_REG0 0x5C
-#define USB2_PHY_MON0 0x60
-#define USB2_RESETVE_REG0 0x64
-#define USB2_ICID_REG0 0x78
-#define USB2_ICID_REG1 0x7C
-
-/* USB2_PLL_REG0 */
-/* This is for Ax stepping */
-#define USB2_PLL_FBDIV_SHIFT_MMP3 0
-#define USB2_PLL_FBDIV_MASK_MMP3 (0xFF << 0)
-
-#define USB2_PLL_REFDIV_SHIFT_MMP3 8
-#define USB2_PLL_REFDIV_MASK_MMP3 (0xF << 8)
-
-#define USB2_PLL_VDD12_SHIFT_MMP3 12
-#define USB2_PLL_VDD18_SHIFT_MMP3 14
-
-/* This is for B0 stepping */
-#define USB2_PLL_FBDIV_SHIFT_MMP3_B0 0
-#define USB2_PLL_REFDIV_SHIFT_MMP3_B0 9
-#define USB2_PLL_VDD18_SHIFT_MMP3_B0 14
-#define USB2_PLL_FBDIV_MASK_MMP3_B0 0x01FF
-#define USB2_PLL_REFDIV_MASK_MMP3_B0 0x3E00
-
-#define USB2_PLL_CAL12_SHIFT_MMP3 0
-#define USB2_PLL_CALI12_MASK_MMP3 (0x3 << 0)
-
-#define USB2_PLL_VCOCAL_START_SHIFT_MMP3 2
-
-#define USB2_PLL_KVCO_SHIFT_MMP3 4
-#define USB2_PLL_KVCO_MASK_MMP3 (0x7<<4)
-
-#define USB2_PLL_ICP_SHIFT_MMP3 8
-#define USB2_PLL_ICP_MASK_MMP3 (0x7<<8)
-
-#define USB2_PLL_LOCK_BYPASS_SHIFT_MMP3 12
-
-#define USB2_PLL_PU_PLL_SHIFT_MMP3 13
-#define USB2_PLL_PU_PLL_MASK (0x1 << 13)
-
-#define USB2_PLL_READY_MASK_MMP3 (0x1 << 15)
-
-/* USB2_TX_REG0 */
-#define USB2_TX_IMPCAL_VTH_SHIFT_MMP3 8
-#define USB2_TX_IMPCAL_VTH_MASK_MMP3 (0x7 << 8)
-
-#define USB2_TX_RCAL_START_SHIFT_MMP3 13
-
-/* USB2_TX_REG1 */
-#define USB2_TX_CK60_PHSEL_SHIFT_MMP3 0
-#define USB2_TX_CK60_PHSEL_MASK_MMP3 (0xf << 0)
-
-#define USB2_TX_AMP_SHIFT_MMP3 4
-#define USB2_TX_AMP_MASK_MMP3 (0x7 << 4)
-
-#define USB2_TX_VDD12_SHIFT_MMP3 8
-#define USB2_TX_VDD12_MASK_MMP3 (0x3 << 8)
-
-/* USB2_TX_REG2 */
-#define USB2_TX_DRV_SLEWRATE_SHIFT 10
-
-/* USB2_RX_REG0 */
-#define USB2_RX_SQ_THRESH_SHIFT_MMP3 4
-#define USB2_RX_SQ_THRESH_MASK_MMP3 (0xf << 4)
-
-#define USB2_RX_SQ_LENGTH_SHIFT_MMP3 10
-#define USB2_RX_SQ_LENGTH_MASK_MMP3 (0x3 << 10)
-
-/* USB2_ANA_REG1*/
-#define USB2_ANA_PU_ANA_SHIFT_MMP3 14
-
-/* USB2_OTG_REG0 */
-#define USB2_OTG_PU_OTG_SHIFT_MMP3 3
-
/* fsic registers */
#define FSIC_MISC 0x4
#define FSIC_INT 0x28
--
2.21.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-08-30 22:17 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-30 22:07 [PATCH v3 00/16] Initial support for Marvell MMP3 SoC Lubomir Rintel
2019-08-30 22:07 ` Lubomir Rintel
2019-08-30 22:07 ` Lubomir Rintel
2019-08-30 22:07 ` [PATCH v3 01/16] dt-bindings: arm: cpu: Add Marvell MMP3 SMP enable method Lubomir Rintel
2019-08-30 22:07 ` Lubomir Rintel
2019-08-30 22:07 ` Lubomir Rintel
2019-08-30 22:07 ` [PATCH v3 02/16] dt-bindings: arm: Convert Marvell MMP board/soc bindings to json-schema Lubomir Rintel
2019-08-30 22:07 ` Lubomir Rintel
2019-08-30 22:07 ` Lubomir Rintel
2019-09-02 13:39 ` Rob Herring
2019-09-02 13:39 ` Rob Herring
2019-09-02 13:39 ` Rob Herring
2019-08-30 22:07 ` [PATCH v3 03/16] dt-bindings: arm: mrvl: Document MMP3 compatible string Lubomir Rintel
2019-08-30 22:07 ` Lubomir Rintel
2019-08-30 22:07 ` Lubomir Rintel
2019-08-30 22:07 ` [PATCH v3 04/16] dt-bindings: mrvl,intc: Add a MMP3 interrupt controller Lubomir Rintel
2019-08-30 22:07 ` [PATCH v3 04/16] dt-bindings: mrvl, intc: " Lubomir Rintel
2019-08-30 22:07 ` Lubomir Rintel
2019-08-30 22:07 ` [PATCH v3 05/16] dt-bindings: phy-mmp3-usb: Add bindings Lubomir Rintel
2019-08-30 22:07 ` Lubomir Rintel
2019-08-30 22:07 ` Lubomir Rintel
2019-08-30 22:07 ` [PATCH v3 06/16] ARM: l2c: add definition for FWA in PL310 aux register Lubomir Rintel
2019-08-30 22:07 ` Lubomir Rintel
2019-08-30 22:07 ` Lubomir Rintel
2019-08-30 22:07 ` [PATCH v3 07/16] ARM: mmp: don't select CACHE_TAUROS2 on all ARCH_MMP Lubomir Rintel
2019-08-30 22:07 ` Lubomir Rintel
2019-08-30 22:07 ` Lubomir Rintel
2019-08-30 22:07 ` [PATCH v3 08/16] ARM: mmp: map the PGU as well Lubomir Rintel
2019-08-30 22:07 ` Lubomir Rintel
2019-08-30 22:07 ` Lubomir Rintel
2019-08-30 22:07 ` [PATCH v3 09/16] ARM: mmp: DT: convert timer driver to use TIMER_OF_DECLARE Lubomir Rintel
2019-08-30 22:07 ` Lubomir Rintel
2019-08-30 22:07 ` Lubomir Rintel
2019-08-30 22:07 ` [PATCH v3 10/16] ARM: mmp: define MMP_CHIPID by the means of CIU_REG() Lubomir Rintel
2019-08-30 22:07 ` Lubomir Rintel
2019-08-30 22:07 ` Lubomir Rintel
2019-08-30 22:07 ` [PATCH v3 11/16] ARM: mmp: add support for MMP3 SoC Lubomir Rintel
2019-08-30 22:07 ` Lubomir Rintel
2019-08-30 22:07 ` Lubomir Rintel
2019-09-06 23:48 ` Stephen Boyd
2019-09-06 23:48 ` Stephen Boyd
2019-09-06 23:48 ` Stephen Boyd
2019-08-30 22:07 ` [PATCH v3 12/16] ARM: mmp: add SMP support Lubomir Rintel
2019-08-30 22:07 ` Lubomir Rintel
2019-08-30 22:07 ` Lubomir Rintel
2019-08-30 22:07 ` [PATCH v3 13/16] ARM: mmp: move cputype.h to include/linux/soc/ Lubomir Rintel
2019-08-30 22:07 ` Lubomir Rintel
2019-08-30 22:07 ` Lubomir Rintel
2019-09-02 8:15 ` kbuild test robot
2019-09-02 8:15 ` kbuild test robot
2019-09-02 8:15 ` kbuild test robot
2019-09-05 10:20 ` Arnd Bergmann
2019-09-05 10:20 ` Arnd Bergmann
2019-08-30 22:07 ` Lubomir Rintel [this message]
2019-08-30 22:07 ` [PATCH v3 14/16] ARM: mmp: remove MMP3 USB PHY registers from regs-usb.h Lubomir Rintel
2019-08-30 22:07 ` Lubomir Rintel
2019-08-30 22:07 ` [PATCH v3 15/16] phy: phy-mmp3-usb: add a new driver Lubomir Rintel
2019-08-30 22:07 ` Lubomir Rintel
2019-08-30 22:07 ` Lubomir Rintel
2019-10-10 8:58 ` Kishon Vijay Abraham I
2019-10-10 8:58 ` Kishon Vijay Abraham I
2019-10-10 8:58 ` Kishon Vijay Abraham I
2019-08-30 22:07 ` [PATCH v3 16/16] ARM: dts: mmp3: Add MMP3 SoC dts file Lubomir Rintel
2019-08-30 22:07 ` Lubomir Rintel
2019-08-30 22:07 ` Lubomir Rintel
2019-09-05 10:17 ` Arnd Bergmann
2019-09-05 10:17 ` Arnd Bergmann
2019-09-05 10:24 ` [PATCH v3 00/16] Initial support for Marvell MMP3 SoC Arnd Bergmann
2019-09-05 10:24 ` Arnd Bergmann
2019-09-05 10:24 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190830220743.439670-15-lkundrak@v3.sk \
--to=lkundrak@v3.sk \
--cc=devicetree@vger.kernel.org \
--cc=jason@lakedaemon.net \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=olof@lixom.net \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.