[PATCH v6 00/13] implement poweroff for mt6323 / bpi-r2

[PATCH v6 00/13] implement poweroff for mt6323 / bpi-r2

[Frank Wunderlich]

mainline-driver does not support mt6323

this series makes some cleanup to mt6397-rtc-driver, adds mt6323 and
implement power-controller on it.

tested on bananapi-r2

Original Patch from Josef Friedl

changes since v5:
	- splitted part 1 to separate changes and additions not related to pwrc
	- move mfd/mt6397/core.h from v4.8 in separate patch "add mutex include"
	- changed recipients (moved from To to Cc, removed committers)
changes since v4:
	- relative path in part 1+2
	- drop change of copyright-year in part 5
changes since v3:
	- moved SOB in 2/10 and 9/10
	- moved part 5 to 6 to be near driver-change
	- changehistory of patches below ---

changes since v2:
	- Splitted some parts and rebased on 5.3-rc2:

	v2.1 dt-bindings: add powercontroller – try to make better subject
	v2.2 separate rtc-mt6397.txt (suggested by Alexandre Belloni)
	     add missing commit-message (suggested by Matthias Brugger)
	v2.3 fix alloc after IRQ (suggested by Alexandre Belloni)
	     new compatible (splitting suggested by Alexandre Belloni)
	     needed due to different rtc-base/size see #7
	v2.4 simplifications (Define-res-macros)
	     add mt6323 rtc+pwrc
	v2.5 add poweroff-driver (no change)
	v2.6 MAINTAINERS (no change)
	v2.7 DTS-Changes (no change)


Frank Wunderlich (1):
  dt-bindings: mfd: mediatek: mt6397: change to relative paths

Josef Friedl (12):
  dt-bindings: mfd: mediatek: update rtc to include mt6323
  dt-bindings: mfd: mediatek: add mt6323 power-controller
  dt-bindings: rtc: mediatek: add missing mt6397 rtc
  rtc: mt6397: move some common definitions into rtc.h
  mfd: mt6397: add mutex include
  rtc: mt6397: improvements of rtc driver
  mfd: mt6323: some improvements of mt6397-core
  rtc: mt6397: add compatible for mt6323
  mfd: mt6323: add mt6323 rtc+pwrc
  power: reset: add driver for mt6323 poweroff
  MAINTAINERS: add Mediatek shutdown drivers
  arm: dts: mt6323: add keys, power-controller, rtc and codec

 .../devicetree/bindings/mfd/mt6397.txt        |  20 +++-
 .../bindings/power/reset/mt6323-poweroff.txt  |  20 ++++
 .../devicetree/bindings/rtc/rtc-mt6397.txt    |  29 +++++
 MAINTAINERS                                   |   7 ++
 arch/arm/boot/dts/mt6323.dtsi                 |  27 +++++
 drivers/mfd/mt6397-core.c                     |  38 +++++--
 drivers/power/reset/Kconfig                   |  10 ++
 drivers/power/reset/Makefile                  |   1 +
 drivers/power/reset/mt6323-poweroff.c         |  97 ++++++++++++++++
 drivers/rtc/rtc-mt6397.c                      | 107 ++++--------------
 include/linux/mfd/mt6397/core.h               |   2 +
 include/linux/mfd/mt6397/rtc.h                |  71 ++++++++++++
 12 files changed, 327 insertions(+), 102 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
 create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
 create mode 100644 drivers/power/reset/mt6323-poweroff.c
 create mode 100644 include/linux/mfd/mt6397/rtc.h

-- 
2.17.1

[PATCH v6 00/13] implement poweroff for mt6323 / bpi-r2

[Frank Wunderlich]

mainline-driver does not support mt6323

this series makes some cleanup to mt6397-rtc-driver, adds mt6323 and
implement power-controller on it.

tested on bananapi-r2

Original Patch from Josef Friedl

changes since v5:
	- splitted part 1 to separate changes and additions not related to pwrc
	- move mfd/mt6397/core.h from v4.8 in separate patch "add mutex include"
	- changed recipients (moved from To to Cc, removed committers)
changes since v4:
	- relative path in part 1+2
	- drop change of copyright-year in part 5
changes since v3:
	- moved SOB in 2/10 and 9/10
	- moved part 5 to 6 to be near driver-change
	- changehistory of patches below ---

changes since v2:
	- Splitted some parts and rebased on 5.3-rc2:

	v2.1 dt-bindings: add powercontroller – try to make better subject
	v2.2 separate rtc-mt6397.txt (suggested by Alexandre Belloni)
	     add missing commit-message (suggested by Matthias Brugger)
	v2.3 fix alloc after IRQ (suggested by Alexandre Belloni)
	     new compatible (splitting suggested by Alexandre Belloni)
	     needed due to different rtc-base/size see #7
	v2.4 simplifications (Define-res-macros)
	     add mt6323 rtc+pwrc
	v2.5 add poweroff-driver (no change)
	v2.6 MAINTAINERS (no change)
	v2.7 DTS-Changes (no change)


Frank Wunderlich (1):
  dt-bindings: mfd: mediatek: mt6397: change to relative paths

Josef Friedl (12):
  dt-bindings: mfd: mediatek: update rtc to include mt6323
  dt-bindings: mfd: mediatek: add mt6323 power-controller
  dt-bindings: rtc: mediatek: add missing mt6397 rtc
  rtc: mt6397: move some common definitions into rtc.h
  mfd: mt6397: add mutex include
  rtc: mt6397: improvements of rtc driver
  mfd: mt6323: some improvements of mt6397-core
  rtc: mt6397: add compatible for mt6323
  mfd: mt6323: add mt6323 rtc+pwrc
  power: reset: add driver for mt6323 poweroff
  MAINTAINERS: add Mediatek shutdown drivers
  arm: dts: mt6323: add keys, power-controller, rtc and codec

 .../devicetree/bindings/mfd/mt6397.txt        |  20 +++-
 .../bindings/power/reset/mt6323-poweroff.txt  |  20 ++++
 .../devicetree/bindings/rtc/rtc-mt6397.txt    |  29 +++++
 MAINTAINERS                                   |   7 ++
 arch/arm/boot/dts/mt6323.dtsi                 |  27 +++++
 drivers/mfd/mt6397-core.c                     |  38 +++++--
 drivers/power/reset/Kconfig                   |  10 ++
 drivers/power/reset/Makefile                  |   1 +
 drivers/power/reset/mt6323-poweroff.c         |  97 ++++++++++++++++
 drivers/rtc/rtc-mt6397.c                      | 107 ++++--------------
 include/linux/mfd/mt6397/core.h               |   2 +
 include/linux/mfd/mt6397/rtc.h                |  71 ++++++++++++
 12 files changed, 327 insertions(+), 102 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
 create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
 create mode 100644 drivers/power/reset/mt6323-poweroff.c
 create mode 100644 include/linux/mfd/mt6397/rtc.h

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v6 01/13] dt-bindings: mfd: mediatek: mt6397: change to relative paths

[Frank Wunderlich]

paths in dt-bindings should be relative as suggested by Lee Johnes

Suggested-By: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
changes since v5: splitted from dt-bindings: add powercontroller
---
 Documentation/devicetree/bindings/mfd/mt6397.txt | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
index 0ebd08af777d..ab3163a60929 100644
--- a/Documentation/devicetree/bindings/mfd/mt6397.txt
+++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
@@ -12,7 +12,7 @@ MT6397/MT6323 is a multifunction device with the following sub modules:
 It is interfaced to host controller using SPI interface by a proprietary hardware
 called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap.
 See the following for pwarp node definitions:
-Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
+../soc/mediatek/pwrap.txt
 
 This document describes the binding for MFD device and its sub module.
 
@@ -27,9 +27,9 @@ Optional subnodes:
 - regulators
 	Required properties:
 		- compatible: "mediatek,mt6397-regulator"
-	see Documentation/devicetree/bindings/regulator/mt6397-regulator.txt
+	see ../regulator/mt6397-regulator.txt
 		- compatible: "mediatek,mt6323-regulator"
-	see Documentation/devicetree/bindings/regulator/mt6323-regulator.txt
+	see ../regulator/mt6323-regulator.txt
 - codec
 	Required properties:
 		- compatible: "mediatek,mt6397-codec"
@@ -39,12 +39,12 @@ Optional subnodes:
 - led
 	Required properties:
 		- compatible: "mediatek,mt6323-led"
-	see Documentation/devicetree/bindings/leds/leds-mt6323.txt
+	see ../leds/leds-mt6323.txt
 
 - keys
 	Required properties:
 		- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
-	see Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
+	see ../input/mtk-pmic-keys.txt
 
 Example:
 	pwrap: pwrap@1000f000 {
-- 
2.17.1

[PATCH v6 01/13] dt-bindings: mfd: mediatek: mt6397: change to relative paths

[Frank Wunderlich]

paths in dt-bindings should be relative as suggested by Lee Johnes

Suggested-By: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
changes since v5: splitted from dt-bindings: add powercontroller
---
 Documentation/devicetree/bindings/mfd/mt6397.txt | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
index 0ebd08af777d..ab3163a60929 100644
--- a/Documentation/devicetree/bindings/mfd/mt6397.txt
+++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
@@ -12,7 +12,7 @@ MT6397/MT6323 is a multifunction device with the following sub modules:
 It is interfaced to host controller using SPI interface by a proprietary hardware
 called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap.
 See the following for pwarp node definitions:
-Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
+../soc/mediatek/pwrap.txt
 
 This document describes the binding for MFD device and its sub module.
 
@@ -27,9 +27,9 @@ Optional subnodes:
 - regulators
 	Required properties:
 		- compatible: "mediatek,mt6397-regulator"
-	see Documentation/devicetree/bindings/regulator/mt6397-regulator.txt
+	see ../regulator/mt6397-regulator.txt
 		- compatible: "mediatek,mt6323-regulator"
-	see Documentation/devicetree/bindings/regulator/mt6323-regulator.txt
+	see ../regulator/mt6323-regulator.txt
 - codec
 	Required properties:
 		- compatible: "mediatek,mt6397-codec"
@@ -39,12 +39,12 @@ Optional subnodes:
 - led
 	Required properties:
 		- compatible: "mediatek,mt6323-led"
-	see Documentation/devicetree/bindings/leds/leds-mt6323.txt
+	see ../leds/leds-mt6323.txt
 
 - keys
 	Required properties:
 		- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
-	see Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
+	see ../input/mtk-pmic-keys.txt
 
 Example:
 	pwrap: pwrap@1000f000 {
-- 
2.17.1

[PATCH v6 01/13] dt-bindings: mfd: mediatek: mt6397: change to relative paths

[Frank Wunderlich]

paths in dt-bindings should be relative as suggested by Lee Johnes

Suggested-By: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
changes since v5: splitted from dt-bindings: add powercontroller
---
 Documentation/devicetree/bindings/mfd/mt6397.txt | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
index 0ebd08af777d..ab3163a60929 100644
--- a/Documentation/devicetree/bindings/mfd/mt6397.txt
+++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
@@ -12,7 +12,7 @@ MT6397/MT6323 is a multifunction device with the following sub modules:
 It is interfaced to host controller using SPI interface by a proprietary hardware
 called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap.
 See the following for pwarp node definitions:
-Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
+../soc/mediatek/pwrap.txt
 
 This document describes the binding for MFD device and its sub module.
 
@@ -27,9 +27,9 @@ Optional subnodes:
 - regulators
 	Required properties:
 		- compatible: "mediatek,mt6397-regulator"
-	see Documentation/devicetree/bindings/regulator/mt6397-regulator.txt
+	see ../regulator/mt6397-regulator.txt
 		- compatible: "mediatek,mt6323-regulator"
-	see Documentation/devicetree/bindings/regulator/mt6323-regulator.txt
+	see ../regulator/mt6323-regulator.txt
 - codec
 	Required properties:
 		- compatible: "mediatek,mt6397-codec"
@@ -39,12 +39,12 @@ Optional subnodes:
 - led
 	Required properties:
 		- compatible: "mediatek,mt6323-led"
-	see Documentation/devicetree/bindings/leds/leds-mt6323.txt
+	see ../leds/leds-mt6323.txt
 
 - keys
 	Required properties:
 		- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
-	see Documentation/devicetree/bindings/input/mtk-pmic-keys.txt
+	see ../input/mtk-pmic-keys.txt
 
 Example:
 	pwrap: pwrap@1000f000 {
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v6 02/13] dt-bindings: mfd: mediatek: update rtc to include mt6323

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

add mt6323 to rtc-bindings

Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
changes since v5: splitted from "dt-bindings: add powercontroller"
---
 Documentation/devicetree/bindings/mfd/mt6397.txt | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
index ab3163a60929..5fccf987865b 100644
--- a/Documentation/devicetree/bindings/mfd/mt6397.txt
+++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
@@ -22,8 +22,10 @@ compatible: "mediatek,mt6397" or "mediatek,mt6323"
 Optional subnodes:
 
 - rtc
-	Required properties:
+	Required properties: Should be one of follows
+		- compatible: "mediatek,mt6323-rtc"
 		- compatible: "mediatek,mt6397-rtc"
+	For details, see ../rtc/rtc-mt6397.txt
 - regulators
 	Required properties:
 		- compatible: "mediatek,mt6397-regulator"
-- 
2.17.1

[PATCH v6 02/13] dt-bindings: mfd: mediatek: update rtc to include mt6323

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

add mt6323 to rtc-bindings

Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
changes since v5: splitted from "dt-bindings: add powercontroller"
---
 Documentation/devicetree/bindings/mfd/mt6397.txt | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
index ab3163a60929..5fccf987865b 100644
--- a/Documentation/devicetree/bindings/mfd/mt6397.txt
+++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
@@ -22,8 +22,10 @@ compatible: "mediatek,mt6397" or "mediatek,mt6323"
 Optional subnodes:
 
 - rtc
-	Required properties:
+	Required properties: Should be one of follows
+		- compatible: "mediatek,mt6323-rtc"
 		- compatible: "mediatek,mt6397-rtc"
+	For details, see ../rtc/rtc-mt6397.txt
 - regulators
 	Required properties:
 		- compatible: "mediatek,mt6397-regulator"
-- 
2.17.1

[PATCH v6 02/13] dt-bindings: mfd: mediatek: update rtc to include mt6323

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

add mt6323 to rtc-bindings

Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
changes since v5: splitted from "dt-bindings: add powercontroller"
---
 Documentation/devicetree/bindings/mfd/mt6397.txt | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
index ab3163a60929..5fccf987865b 100644
--- a/Documentation/devicetree/bindings/mfd/mt6397.txt
+++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
@@ -22,8 +22,10 @@ compatible: "mediatek,mt6397" or "mediatek,mt6323"
 Optional subnodes:
 
 - rtc
-	Required properties:
+	Required properties: Should be one of follows
+		- compatible: "mediatek,mt6323-rtc"
 		- compatible: "mediatek,mt6397-rtc"
+	For details, see ../rtc/rtc-mt6397.txt
 - regulators
 	Required properties:
 		- compatible: "mediatek,mt6397-regulator"
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v6 03/13] dt-bindings: mfd: mediatek: add mt6323 power-controller

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

- add powercontroller-section to existing binding-document
- add mt6323-pwrc bindings-document with example

Suggested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
---
changes since v5: split out non-pwrc related changes
changes since v4: none
changes since v3: none
changes since v2: none (=v2 part 7)
---
 .../devicetree/bindings/mfd/mt6397.txt        |  6 ++++++
 .../bindings/power/reset/mt6323-poweroff.txt  | 20 +++++++++++++++++++
 2 files changed, 26 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt

diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
index 5fccf987865b..a9b105ac00a8 100644
--- a/Documentation/devicetree/bindings/mfd/mt6397.txt
+++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
@@ -8,6 +8,7 @@ MT6397/MT6323 is a multifunction device with the following sub modules:
 - Clock
 - LED
 - Keys
+- Power controller
 
 It is interfaced to host controller using SPI interface by a proprietary hardware
 called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap.
@@ -48,6 +49,11 @@ Optional subnodes:
 		- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
 	see ../input/mtk-pmic-keys.txt
 
+- power-controller
+	Required properties:
+		- compatible: "mediatek,mt6323-pwrc"
+	For details, see ../power/reset/mt6323-poweroff.txt
+
 Example:
 	pwrap: pwrap@1000f000 {
 		compatible = "mediatek,mt8135-pwrap";
diff --git a/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt b/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
new file mode 100644
index 000000000000..933f0c48e887
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
@@ -0,0 +1,20 @@
+Device Tree Bindings for Power Controller on MediaTek PMIC
+
+The power controller which could be found on PMIC is responsible for externally
+powering off or on the remote MediaTek SoC through the circuit BBPU.
+
+Required properties:
+- compatible: Should be one of follows
+       "mediatek,mt6323-pwrc": for MT6323 PMIC
+
+Example:
+
+       pmic {
+               compatible = "mediatek,mt6323";
+
+               ...
+
+               power-controller {
+                       compatible = "mediatek,mt6323-pwrc";
+               };
+       }
-- 
2.17.1

[PATCH v6 03/13] dt-bindings: mfd: mediatek: add mt6323 power-controller

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

- add powercontroller-section to existing binding-document
- add mt6323-pwrc bindings-document with example

Suggested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
---
changes since v5: split out non-pwrc related changes
changes since v4: none
changes since v3: none
changes since v2: none (=v2 part 7)
---
 .../devicetree/bindings/mfd/mt6397.txt        |  6 ++++++
 .../bindings/power/reset/mt6323-poweroff.txt  | 20 +++++++++++++++++++
 2 files changed, 26 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt

diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
index 5fccf987865b..a9b105ac00a8 100644
--- a/Documentation/devicetree/bindings/mfd/mt6397.txt
+++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
@@ -8,6 +8,7 @@ MT6397/MT6323 is a multifunction device with the following sub modules:
 - Clock
 - LED
 - Keys
+- Power controller
 
 It is interfaced to host controller using SPI interface by a proprietary hardware
 called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap.
@@ -48,6 +49,11 @@ Optional subnodes:
 		- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
 	see ../input/mtk-pmic-keys.txt
 
+- power-controller
+	Required properties:
+		- compatible: "mediatek,mt6323-pwrc"
+	For details, see ../power/reset/mt6323-poweroff.txt
+
 Example:
 	pwrap: pwrap@1000f000 {
 		compatible = "mediatek,mt8135-pwrap";
diff --git a/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt b/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
new file mode 100644
index 000000000000..933f0c48e887
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
@@ -0,0 +1,20 @@
+Device Tree Bindings for Power Controller on MediaTek PMIC
+
+The power controller which could be found on PMIC is responsible for externally
+powering off or on the remote MediaTek SoC through the circuit BBPU.
+
+Required properties:
+- compatible: Should be one of follows
+       "mediatek,mt6323-pwrc": for MT6323 PMIC
+
+Example:
+
+       pmic {
+               compatible = "mediatek,mt6323";
+
+               ...
+
+               power-controller {
+                       compatible = "mediatek,mt6323-pwrc";
+               };
+       }
-- 
2.17.1

[PATCH v6 03/13] dt-bindings: mfd: mediatek: add mt6323 power-controller

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

- add powercontroller-section to existing binding-document
- add mt6323-pwrc bindings-document with example

Suggested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
---
changes since v5: split out non-pwrc related changes
changes since v4: none
changes since v3: none
changes since v2: none (=v2 part 7)
---
 .../devicetree/bindings/mfd/mt6397.txt        |  6 ++++++
 .../bindings/power/reset/mt6323-poweroff.txt  | 20 +++++++++++++++++++
 2 files changed, 26 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt

diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
index 5fccf987865b..a9b105ac00a8 100644
--- a/Documentation/devicetree/bindings/mfd/mt6397.txt
+++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
@@ -8,6 +8,7 @@ MT6397/MT6323 is a multifunction device with the following sub modules:
 - Clock
 - LED
 - Keys
+- Power controller
 
 It is interfaced to host controller using SPI interface by a proprietary hardware
 called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap.
@@ -48,6 +49,11 @@ Optional subnodes:
 		- compatible: "mediatek,mt6397-keys" or "mediatek,mt6323-keys"
 	see ../input/mtk-pmic-keys.txt
 
+- power-controller
+	Required properties:
+		- compatible: "mediatek,mt6323-pwrc"
+	For details, see ../power/reset/mt6323-poweroff.txt
+
 Example:
 	pwrap: pwrap@1000f000 {
 		compatible = "mediatek,mt8135-pwrap";
diff --git a/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt b/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
new file mode 100644
index 000000000000..933f0c48e887
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
@@ -0,0 +1,20 @@
+Device Tree Bindings for Power Controller on MediaTek PMIC
+
+The power controller which could be found on PMIC is responsible for externally
+powering off or on the remote MediaTek SoC through the circuit BBPU.
+
+Required properties:
+- compatible: Should be one of follows
+       "mediatek,mt6323-pwrc": for MT6323 PMIC
+
+Example:
+
+       pmic {
+               compatible = "mediatek,mt6323";
+
+               ...
+
+               power-controller {
+                       compatible = "mediatek,mt6323-pwrc";
+               };
+       }
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v6 04/13] dt-bindings: rtc: mediatek: add missing mt6397 rtc

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

add missing devicetree-binding document for mt6397 rtc
in later patch driver is extended with mt6323 chip

Suggested-By: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
changes since v5: none
changes since v4: use relative path
changes since v3: moved SOB
changes since v2: splitted rtc-mt6397.txt from first patch
---
 .../devicetree/bindings/rtc/rtc-mt6397.txt    | 29 +++++++++++++++++++
 1 file changed, 29 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mt6397.txt

diff --git a/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt b/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
new file mode 100644
index 000000000000..55a0c8874c03
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
@@ -0,0 +1,29 @@
+Device-Tree bindings for MediaTek PMIC based RTC
+
+MediaTek PMIC based RTC is an independent function of MediaTek PMIC that works
+as a type of multi-function device (MFD). The RTC can be configured and set up
+with PMIC wrapper bus which is a common resource shared with the other
+functions found on the same PMIC.
+
+For MediaTek PMIC MFD bindings, see:
+../mfd/mt6397.txt
+
+For MediaTek PMIC wrapper bus bindings, see:
+../soc/mediatek/pwrap.txt
+
+Required properties:
+- compatible: Should be one of follows
+       "mediatek,mt6323-rtc": for MT6323 PMIC
+       "mediatek,mt6397-rtc": for MT6397 PMIC
+
+Example:
+
+       pmic {
+               compatible = "mediatek,mt6323";
+
+               ...
+
+               rtc {
+                       compatible = "mediatek,mt6323-rtc";
+               };
+       };
-- 
2.17.1

[PATCH v6 04/13] dt-bindings: rtc: mediatek: add missing mt6397 rtc

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

add missing devicetree-binding document for mt6397 rtc
in later patch driver is extended with mt6323 chip

Suggested-By: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
changes since v5: none
changes since v4: use relative path
changes since v3: moved SOB
changes since v2: splitted rtc-mt6397.txt from first patch
---
 .../devicetree/bindings/rtc/rtc-mt6397.txt    | 29 +++++++++++++++++++
 1 file changed, 29 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mt6397.txt

diff --git a/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt b/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
new file mode 100644
index 000000000000..55a0c8874c03
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
@@ -0,0 +1,29 @@
+Device-Tree bindings for MediaTek PMIC based RTC
+
+MediaTek PMIC based RTC is an independent function of MediaTek PMIC that works
+as a type of multi-function device (MFD). The RTC can be configured and set up
+with PMIC wrapper bus which is a common resource shared with the other
+functions found on the same PMIC.
+
+For MediaTek PMIC MFD bindings, see:
+../mfd/mt6397.txt
+
+For MediaTek PMIC wrapper bus bindings, see:
+../soc/mediatek/pwrap.txt
+
+Required properties:
+- compatible: Should be one of follows
+       "mediatek,mt6323-rtc": for MT6323 PMIC
+       "mediatek,mt6397-rtc": for MT6397 PMIC
+
+Example:
+
+       pmic {
+               compatible = "mediatek,mt6323";
+
+               ...
+
+               rtc {
+                       compatible = "mediatek,mt6323-rtc";
+               };
+       };
-- 
2.17.1

[PATCH v6 04/13] dt-bindings: rtc: mediatek: add missing mt6397 rtc

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

add missing devicetree-binding document for mt6397 rtc
in later patch driver is extended with mt6323 chip

Suggested-By: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
changes since v5: none
changes since v4: use relative path
changes since v3: moved SOB
changes since v2: splitted rtc-mt6397.txt from first patch
---
 .../devicetree/bindings/rtc/rtc-mt6397.txt    | 29 +++++++++++++++++++
 1 file changed, 29 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mt6397.txt

diff --git a/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt b/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
new file mode 100644
index 000000000000..55a0c8874c03
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
@@ -0,0 +1,29 @@
+Device-Tree bindings for MediaTek PMIC based RTC
+
+MediaTek PMIC based RTC is an independent function of MediaTek PMIC that works
+as a type of multi-function device (MFD). The RTC can be configured and set up
+with PMIC wrapper bus which is a common resource shared with the other
+functions found on the same PMIC.
+
+For MediaTek PMIC MFD bindings, see:
+../mfd/mt6397.txt
+
+For MediaTek PMIC wrapper bus bindings, see:
+../soc/mediatek/pwrap.txt
+
+Required properties:
+- compatible: Should be one of follows
+       "mediatek,mt6323-rtc": for MT6323 PMIC
+       "mediatek,mt6397-rtc": for MT6397 PMIC
+
+Example:
+
+       pmic {
+               compatible = "mediatek,mt6323";
+
+               ...
+
+               rtc {
+                       compatible = "mediatek,mt6323-rtc";
+               };
+       };
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v6 05/13] rtc: mt6397: move some common definitions into rtc.h

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

move code to separate header-file to reuse definitions later
in poweroff-driver (drivers/power/reset/mt6323-poweroff.c)

Suggested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
changes since v5: none
changes since v4: none
changes since v3: none
changes since v2: add missing commit-message
---
 drivers/rtc/rtc-mt6397.c       | 55 +-------------------------
 include/linux/mfd/mt6397/rtc.h | 71 ++++++++++++++++++++++++++++++++++
 2 files changed, 72 insertions(+), 54 deletions(-)
 create mode 100644 include/linux/mfd/mt6397/rtc.h

diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
index b46ed4dc7015..c08ee5edf865 100644
--- a/drivers/rtc/rtc-mt6397.c
+++ b/drivers/rtc/rtc-mt6397.c
@@ -9,60 +9,7 @@
 #include <linux/module.h>
 #include <linux/regmap.h>
 #include <linux/rtc.h>
-#include <linux/irqdomain.h>
-#include <linux/platform_device.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/io.h>
-#include <linux/mfd/mt6397/core.h>
-
-#define RTC_BBPU		0x0000
-#define RTC_BBPU_CBUSY		BIT(6)
-
-#define RTC_WRTGR		0x003c
-
-#define RTC_IRQ_STA		0x0002
-#define RTC_IRQ_STA_AL		BIT(0)
-#define RTC_IRQ_STA_LP		BIT(3)
-
-#define RTC_IRQ_EN		0x0004
-#define RTC_IRQ_EN_AL		BIT(0)
-#define RTC_IRQ_EN_ONESHOT	BIT(2)
-#define RTC_IRQ_EN_LP		BIT(3)
-#define RTC_IRQ_EN_ONESHOT_AL	(RTC_IRQ_EN_ONESHOT | RTC_IRQ_EN_AL)
-
-#define RTC_AL_MASK		0x0008
-#define RTC_AL_MASK_DOW		BIT(4)
-
-#define RTC_TC_SEC		0x000a
-/* Min, Hour, Dom... register offset to RTC_TC_SEC */
-#define RTC_OFFSET_SEC		0
-#define RTC_OFFSET_MIN		1
-#define RTC_OFFSET_HOUR		2
-#define RTC_OFFSET_DOM		3
-#define RTC_OFFSET_DOW		4
-#define RTC_OFFSET_MTH		5
-#define RTC_OFFSET_YEAR		6
-#define RTC_OFFSET_COUNT	7
-
-#define RTC_AL_SEC		0x0018
-
-#define RTC_PDN2		0x002e
-#define RTC_PDN2_PWRON_ALARM	BIT(4)
-
-#define RTC_MIN_YEAR		1968
-#define RTC_BASE_YEAR		1900
-#define RTC_NUM_YEARS		128
-#define RTC_MIN_YEAR_OFFSET	(RTC_MIN_YEAR - RTC_BASE_YEAR)
-
-struct mt6397_rtc {
-	struct device		*dev;
-	struct rtc_device	*rtc_dev;
-	struct mutex		lock;
-	struct regmap		*regmap;
-	int			irq;
-	u32			addr_base;
-};
+#include <linux/mfd/mt6397/rtc.h>
 
 static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
 {
diff --git a/include/linux/mfd/mt6397/rtc.h b/include/linux/mfd/mt6397/rtc.h
new file mode 100644
index 000000000000..b702c29e8c74
--- /dev/null
+++ b/include/linux/mfd/mt6397/rtc.h
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2014-2018 MediaTek Inc.
+ *
+ * Author: Tianping.Fang <tianping.fang@mediatek.com>
+ *        Sean Wang <sean.wang@mediatek.com>
+ */
+
+#ifndef _LINUX_MFD_MT6397_RTC_H_
+#define _LINUX_MFD_MT6397_RTC_H_
+
+#include <linux/jiffies.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/rtc.h>
+
+#define RTC_BBPU               0x0000
+#define RTC_BBPU_CBUSY         BIT(6)
+#define RTC_BBPU_KEY            (0x43 << 8)
+
+#define RTC_WRTGR              0x003c
+
+#define RTC_IRQ_STA            0x0002
+#define RTC_IRQ_STA_AL         BIT(0)
+#define RTC_IRQ_STA_LP         BIT(3)
+
+#define RTC_IRQ_EN             0x0004
+#define RTC_IRQ_EN_AL          BIT(0)
+#define RTC_IRQ_EN_ONESHOT     BIT(2)
+#define RTC_IRQ_EN_LP          BIT(3)
+#define RTC_IRQ_EN_ONESHOT_AL  (RTC_IRQ_EN_ONESHOT | RTC_IRQ_EN_AL)
+
+#define RTC_AL_MASK            0x0008
+#define RTC_AL_MASK_DOW                BIT(4)
+
+#define RTC_TC_SEC             0x000a
+/* Min, Hour, Dom... register offset to RTC_TC_SEC */
+#define RTC_OFFSET_SEC         0
+#define RTC_OFFSET_MIN         1
+#define RTC_OFFSET_HOUR                2
+#define RTC_OFFSET_DOM         3
+#define RTC_OFFSET_DOW         4
+#define RTC_OFFSET_MTH         5
+#define RTC_OFFSET_YEAR                6
+#define RTC_OFFSET_COUNT       7
+
+#define RTC_AL_SEC             0x0018
+
+#define RTC_PDN2               0x002e
+#define RTC_PDN2_PWRON_ALARM   BIT(4)
+
+#define RTC_MIN_YEAR           1968
+#define RTC_BASE_YEAR          1900
+#define RTC_NUM_YEARS          128
+#define RTC_MIN_YEAR_OFFSET    (RTC_MIN_YEAR - RTC_BASE_YEAR)
+
+#define MTK_RTC_POLL_DELAY_US  10
+#define MTK_RTC_POLL_TIMEOUT   (jiffies_to_usecs(HZ))
+
+struct mt6397_rtc {
+	struct device           *dev;
+	struct rtc_device       *rtc_dev;
+
+	/* Protect register access from multiple tasks */
+	struct mutex            lock;
+	struct regmap           *regmap;
+	int                     irq;
+	u32                     addr_base;
+};
+
+#endif /* _LINUX_MFD_MT6397_RTC_H_ */
-- 
2.17.1

[PATCH v6 05/13] rtc: mt6397: move some common definitions into rtc.h

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

move code to separate header-file to reuse definitions later
in poweroff-driver (drivers/power/reset/mt6323-poweroff.c)

Suggested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
changes since v5: none
changes since v4: none
changes since v3: none
changes since v2: add missing commit-message
---
 drivers/rtc/rtc-mt6397.c       | 55 +-------------------------
 include/linux/mfd/mt6397/rtc.h | 71 ++++++++++++++++++++++++++++++++++
 2 files changed, 72 insertions(+), 54 deletions(-)
 create mode 100644 include/linux/mfd/mt6397/rtc.h

diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
index b46ed4dc7015..c08ee5edf865 100644
--- a/drivers/rtc/rtc-mt6397.c
+++ b/drivers/rtc/rtc-mt6397.c
@@ -9,60 +9,7 @@
 #include <linux/module.h>
 #include <linux/regmap.h>
 #include <linux/rtc.h>
-#include <linux/irqdomain.h>
-#include <linux/platform_device.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/io.h>
-#include <linux/mfd/mt6397/core.h>
-
-#define RTC_BBPU		0x0000
-#define RTC_BBPU_CBUSY		BIT(6)
-
-#define RTC_WRTGR		0x003c
-
-#define RTC_IRQ_STA		0x0002
-#define RTC_IRQ_STA_AL		BIT(0)
-#define RTC_IRQ_STA_LP		BIT(3)
-
-#define RTC_IRQ_EN		0x0004
-#define RTC_IRQ_EN_AL		BIT(0)
-#define RTC_IRQ_EN_ONESHOT	BIT(2)
-#define RTC_IRQ_EN_LP		BIT(3)
-#define RTC_IRQ_EN_ONESHOT_AL	(RTC_IRQ_EN_ONESHOT | RTC_IRQ_EN_AL)
-
-#define RTC_AL_MASK		0x0008
-#define RTC_AL_MASK_DOW		BIT(4)
-
-#define RTC_TC_SEC		0x000a
-/* Min, Hour, Dom... register offset to RTC_TC_SEC */
-#define RTC_OFFSET_SEC		0
-#define RTC_OFFSET_MIN		1
-#define RTC_OFFSET_HOUR		2
-#define RTC_OFFSET_DOM		3
-#define RTC_OFFSET_DOW		4
-#define RTC_OFFSET_MTH		5
-#define RTC_OFFSET_YEAR		6
-#define RTC_OFFSET_COUNT	7
-
-#define RTC_AL_SEC		0x0018
-
-#define RTC_PDN2		0x002e
-#define RTC_PDN2_PWRON_ALARM	BIT(4)
-
-#define RTC_MIN_YEAR		1968
-#define RTC_BASE_YEAR		1900
-#define RTC_NUM_YEARS		128
-#define RTC_MIN_YEAR_OFFSET	(RTC_MIN_YEAR - RTC_BASE_YEAR)
-
-struct mt6397_rtc {
-	struct device		*dev;
-	struct rtc_device	*rtc_dev;
-	struct mutex		lock;
-	struct regmap		*regmap;
-	int			irq;
-	u32			addr_base;
-};
+#include <linux/mfd/mt6397/rtc.h>
 
 static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
 {
diff --git a/include/linux/mfd/mt6397/rtc.h b/include/linux/mfd/mt6397/rtc.h
new file mode 100644
index 000000000000..b702c29e8c74
--- /dev/null
+++ b/include/linux/mfd/mt6397/rtc.h
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2014-2018 MediaTek Inc.
+ *
+ * Author: Tianping.Fang <tianping.fang@mediatek.com>
+ *        Sean Wang <sean.wang@mediatek.com>
+ */
+
+#ifndef _LINUX_MFD_MT6397_RTC_H_
+#define _LINUX_MFD_MT6397_RTC_H_
+
+#include <linux/jiffies.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/rtc.h>
+
+#define RTC_BBPU               0x0000
+#define RTC_BBPU_CBUSY         BIT(6)
+#define RTC_BBPU_KEY            (0x43 << 8)
+
+#define RTC_WRTGR              0x003c
+
+#define RTC_IRQ_STA            0x0002
+#define RTC_IRQ_STA_AL         BIT(0)
+#define RTC_IRQ_STA_LP         BIT(3)
+
+#define RTC_IRQ_EN             0x0004
+#define RTC_IRQ_EN_AL          BIT(0)
+#define RTC_IRQ_EN_ONESHOT     BIT(2)
+#define RTC_IRQ_EN_LP          BIT(3)
+#define RTC_IRQ_EN_ONESHOT_AL  (RTC_IRQ_EN_ONESHOT | RTC_IRQ_EN_AL)
+
+#define RTC_AL_MASK            0x0008
+#define RTC_AL_MASK_DOW                BIT(4)
+
+#define RTC_TC_SEC             0x000a
+/* Min, Hour, Dom... register offset to RTC_TC_SEC */
+#define RTC_OFFSET_SEC         0
+#define RTC_OFFSET_MIN         1
+#define RTC_OFFSET_HOUR                2
+#define RTC_OFFSET_DOM         3
+#define RTC_OFFSET_DOW         4
+#define RTC_OFFSET_MTH         5
+#define RTC_OFFSET_YEAR                6
+#define RTC_OFFSET_COUNT       7
+
+#define RTC_AL_SEC             0x0018
+
+#define RTC_PDN2               0x002e
+#define RTC_PDN2_PWRON_ALARM   BIT(4)
+
+#define RTC_MIN_YEAR           1968
+#define RTC_BASE_YEAR          1900
+#define RTC_NUM_YEARS          128
+#define RTC_MIN_YEAR_OFFSET    (RTC_MIN_YEAR - RTC_BASE_YEAR)
+
+#define MTK_RTC_POLL_DELAY_US  10
+#define MTK_RTC_POLL_TIMEOUT   (jiffies_to_usecs(HZ))
+
+struct mt6397_rtc {
+	struct device           *dev;
+	struct rtc_device       *rtc_dev;
+
+	/* Protect register access from multiple tasks */
+	struct mutex            lock;
+	struct regmap           *regmap;
+	int                     irq;
+	u32                     addr_base;
+};
+
+#endif /* _LINUX_MFD_MT6397_RTC_H_ */
-- 
2.17.1

[PATCH v6 05/13] rtc: mt6397: move some common definitions into rtc.h

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

move code to separate header-file to reuse definitions later
in poweroff-driver (drivers/power/reset/mt6323-poweroff.c)

Suggested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
changes since v5: none
changes since v4: none
changes since v3: none
changes since v2: add missing commit-message
---
 drivers/rtc/rtc-mt6397.c       | 55 +-------------------------
 include/linux/mfd/mt6397/rtc.h | 71 ++++++++++++++++++++++++++++++++++
 2 files changed, 72 insertions(+), 54 deletions(-)
 create mode 100644 include/linux/mfd/mt6397/rtc.h

diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
index b46ed4dc7015..c08ee5edf865 100644
--- a/drivers/rtc/rtc-mt6397.c
+++ b/drivers/rtc/rtc-mt6397.c
@@ -9,60 +9,7 @@
 #include <linux/module.h>
 #include <linux/regmap.h>
 #include <linux/rtc.h>
-#include <linux/irqdomain.h>
-#include <linux/platform_device.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/io.h>
-#include <linux/mfd/mt6397/core.h>
-
-#define RTC_BBPU		0x0000
-#define RTC_BBPU_CBUSY		BIT(6)
-
-#define RTC_WRTGR		0x003c
-
-#define RTC_IRQ_STA		0x0002
-#define RTC_IRQ_STA_AL		BIT(0)
-#define RTC_IRQ_STA_LP		BIT(3)
-
-#define RTC_IRQ_EN		0x0004
-#define RTC_IRQ_EN_AL		BIT(0)
-#define RTC_IRQ_EN_ONESHOT	BIT(2)
-#define RTC_IRQ_EN_LP		BIT(3)
-#define RTC_IRQ_EN_ONESHOT_AL	(RTC_IRQ_EN_ONESHOT | RTC_IRQ_EN_AL)
-
-#define RTC_AL_MASK		0x0008
-#define RTC_AL_MASK_DOW		BIT(4)
-
-#define RTC_TC_SEC		0x000a
-/* Min, Hour, Dom... register offset to RTC_TC_SEC */
-#define RTC_OFFSET_SEC		0
-#define RTC_OFFSET_MIN		1
-#define RTC_OFFSET_HOUR		2
-#define RTC_OFFSET_DOM		3
-#define RTC_OFFSET_DOW		4
-#define RTC_OFFSET_MTH		5
-#define RTC_OFFSET_YEAR		6
-#define RTC_OFFSET_COUNT	7
-
-#define RTC_AL_SEC		0x0018
-
-#define RTC_PDN2		0x002e
-#define RTC_PDN2_PWRON_ALARM	BIT(4)
-
-#define RTC_MIN_YEAR		1968
-#define RTC_BASE_YEAR		1900
-#define RTC_NUM_YEARS		128
-#define RTC_MIN_YEAR_OFFSET	(RTC_MIN_YEAR - RTC_BASE_YEAR)
-
-struct mt6397_rtc {
-	struct device		*dev;
-	struct rtc_device	*rtc_dev;
-	struct mutex		lock;
-	struct regmap		*regmap;
-	int			irq;
-	u32			addr_base;
-};
+#include <linux/mfd/mt6397/rtc.h>
 
 static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
 {
diff --git a/include/linux/mfd/mt6397/rtc.h b/include/linux/mfd/mt6397/rtc.h
new file mode 100644
index 000000000000..b702c29e8c74
--- /dev/null
+++ b/include/linux/mfd/mt6397/rtc.h
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2014-2018 MediaTek Inc.
+ *
+ * Author: Tianping.Fang <tianping.fang@mediatek.com>
+ *        Sean Wang <sean.wang@mediatek.com>
+ */
+
+#ifndef _LINUX_MFD_MT6397_RTC_H_
+#define _LINUX_MFD_MT6397_RTC_H_
+
+#include <linux/jiffies.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/rtc.h>
+
+#define RTC_BBPU               0x0000
+#define RTC_BBPU_CBUSY         BIT(6)
+#define RTC_BBPU_KEY            (0x43 << 8)
+
+#define RTC_WRTGR              0x003c
+
+#define RTC_IRQ_STA            0x0002
+#define RTC_IRQ_STA_AL         BIT(0)
+#define RTC_IRQ_STA_LP         BIT(3)
+
+#define RTC_IRQ_EN             0x0004
+#define RTC_IRQ_EN_AL          BIT(0)
+#define RTC_IRQ_EN_ONESHOT     BIT(2)
+#define RTC_IRQ_EN_LP          BIT(3)
+#define RTC_IRQ_EN_ONESHOT_AL  (RTC_IRQ_EN_ONESHOT | RTC_IRQ_EN_AL)
+
+#define RTC_AL_MASK            0x0008
+#define RTC_AL_MASK_DOW                BIT(4)
+
+#define RTC_TC_SEC             0x000a
+/* Min, Hour, Dom... register offset to RTC_TC_SEC */
+#define RTC_OFFSET_SEC         0
+#define RTC_OFFSET_MIN         1
+#define RTC_OFFSET_HOUR                2
+#define RTC_OFFSET_DOM         3
+#define RTC_OFFSET_DOW         4
+#define RTC_OFFSET_MTH         5
+#define RTC_OFFSET_YEAR                6
+#define RTC_OFFSET_COUNT       7
+
+#define RTC_AL_SEC             0x0018
+
+#define RTC_PDN2               0x002e
+#define RTC_PDN2_PWRON_ALARM   BIT(4)
+
+#define RTC_MIN_YEAR           1968
+#define RTC_BASE_YEAR          1900
+#define RTC_NUM_YEARS          128
+#define RTC_MIN_YEAR_OFFSET    (RTC_MIN_YEAR - RTC_BASE_YEAR)
+
+#define MTK_RTC_POLL_DELAY_US  10
+#define MTK_RTC_POLL_TIMEOUT   (jiffies_to_usecs(HZ))
+
+struct mt6397_rtc {
+	struct device           *dev;
+	struct rtc_device       *rtc_dev;
+
+	/* Protect register access from multiple tasks */
+	struct mutex            lock;
+	struct regmap           *regmap;
+	int                     irq;
+	u32                     addr_base;
+};
+
+#endif /* _LINUX_MFD_MT6397_RTC_H_ */
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v6 06/13] mfd: mt6397: add mutex include

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

add missing mutex.h

Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
changes since v5: separated from "power: reset: add driver for mt6323 poweroff"
---
 include/linux/mfd/mt6397/core.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/linux/mfd/mt6397/core.h b/include/linux/mfd/mt6397/core.h
index 25a95e72179b..652da61e3711 100644
--- a/include/linux/mfd/mt6397/core.h
+++ b/include/linux/mfd/mt6397/core.h
@@ -7,6 +7,8 @@
 #ifndef __MFD_MT6397_CORE_H__
 #define __MFD_MT6397_CORE_H__
 
+#include <linux/mutex.h>
+
 enum mt6397_irq_numbers {
 	MT6397_IRQ_SPKL_AB = 0,
 	MT6397_IRQ_SPKR_AB,
-- 
2.17.1

[PATCH v6 06/13] mfd: mt6397: add mutex include

[Frank Wunderlich]

From: Josef Friedl <josef.friedl-D4IDLmZPRBc@public.gmane.org>

add missing mutex.h

Signed-off-by: Josef Friedl <josef.friedl-D4IDLmZPRBc@public.gmane.org>
Signed-off-by: Frank Wunderlich <frank-w-SipyoOjXbOMoAHOVJHB0wA@public.gmane.org>
---
changes since v5: separated from "power: reset: add driver for mt6323 poweroff"
---
 include/linux/mfd/mt6397/core.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/linux/mfd/mt6397/core.h b/include/linux/mfd/mt6397/core.h
index 25a95e72179b..652da61e3711 100644
--- a/include/linux/mfd/mt6397/core.h
+++ b/include/linux/mfd/mt6397/core.h
@@ -7,6 +7,8 @@
 #ifndef __MFD_MT6397_CORE_H__
 #define __MFD_MT6397_CORE_H__
 
+#include <linux/mutex.h>
+
 enum mt6397_irq_numbers {
 	MT6397_IRQ_SPKL_AB = 0,
 	MT6397_IRQ_SPKR_AB,
-- 
2.17.1

[PATCH v6 06/13] mfd: mt6397: add mutex include

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

add missing mutex.h

Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
changes since v5: separated from "power: reset: add driver for mt6323 poweroff"
---
 include/linux/mfd/mt6397/core.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/linux/mfd/mt6397/core.h b/include/linux/mfd/mt6397/core.h
index 25a95e72179b..652da61e3711 100644
--- a/include/linux/mfd/mt6397/core.h
+++ b/include/linux/mfd/mt6397/core.h
@@ -7,6 +7,8 @@
 #ifndef __MFD_MT6397_CORE_H__
 #define __MFD_MT6397_CORE_H__
 
+#include <linux/mutex.h>
+
 enum mt6397_irq_numbers {
 	MT6397_IRQ_SPKL_AB = 0,
 	MT6397_IRQ_SPKR_AB,
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v6 07/13] rtc: mt6397: improvements of rtc driver

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

- use regmap_read_poll_timeout to drop while-loop
- use devm-api to drop remove-callback

Suggested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
changes since v5: none
changes since v4: none
changes since v3: none
changes since v2:
- fix allocation after irq-request
- compatible for mt6323 in separate commit => part 5
---
 drivers/rtc/rtc-mt6397.c | 51 +++++++++++++++-------------------------
 1 file changed, 19 insertions(+), 32 deletions(-)

diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
index c08ee5edf865..9370b7fc9f81 100644
--- a/drivers/rtc/rtc-mt6397.c
+++ b/drivers/rtc/rtc-mt6397.c
@@ -4,16 +4,19 @@
 * Author: Tianping.Fang <tianping.fang@mediatek.com>
 */
 
-#include <linux/delay.h>
-#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/mt6397/core.h>
 #include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/rtc.h>
 #include <linux/mfd/mt6397/rtc.h>
+#include <linux/mod_devicetable.h>
 
 static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
 {
-	unsigned long timeout = jiffies + HZ;
 	int ret;
 	u32 data;
 
@@ -21,19 +24,13 @@ static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
 	if (ret < 0)
 		return ret;
 
-	while (1) {
-		ret = regmap_read(rtc->regmap, rtc->addr_base + RTC_BBPU,
-				  &data);
-		if (ret < 0)
-			break;
-		if (!(data & RTC_BBPU_CBUSY))
-			break;
-		if (time_after(jiffies, timeout)) {
-			ret = -ETIMEDOUT;
-			break;
-		}
-		cpu_relax();
-	}
+	ret = regmap_read_poll_timeout(rtc->regmap,
+					rtc->addr_base + RTC_BBPU, data,
+					!(data & RTC_BBPU_CBUSY),
+					MTK_RTC_POLL_DELAY_US,
+					MTK_RTC_POLL_TIMEOUT);
+	if (ret < 0)
+		dev_err(rtc->dev, "failed to write WRTGE: %d\n", ret);
 
 	return ret;
 }
@@ -266,19 +263,19 @@ static int mtk_rtc_probe(struct platform_device *pdev)
 		return rtc->irq;
 
 	rtc->regmap = mt6397_chip->regmap;
-	rtc->dev = &pdev->dev;
 	mutex_init(&rtc->lock);
 
 	platform_set_drvdata(pdev, rtc);
 
-	rtc->rtc_dev = devm_rtc_allocate_device(rtc->dev);
+	rtc->rtc_dev = devm_rtc_allocate_device(&pdev->dev);
 	if (IS_ERR(rtc->rtc_dev))
 		return PTR_ERR(rtc->rtc_dev);
 
-	ret = request_threaded_irq(rtc->irq, NULL,
-				   mtk_rtc_irq_handler_thread,
-				   IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
-				   "mt6397-rtc", rtc);
+	ret = devm_request_threaded_irq(&pdev->dev, rtc->irq, NULL,
+					mtk_rtc_irq_handler_thread,
+					IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
+					"mt6397-rtc", rtc);
+
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to request alarm IRQ: %d: %d\n",
 			rtc->irq, ret);
@@ -302,15 +299,6 @@ static int mtk_rtc_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int mtk_rtc_remove(struct platform_device *pdev)
-{
-	struct mt6397_rtc *rtc = platform_get_drvdata(pdev);
-
-	free_irq(rtc->irq, rtc);
-
-	return 0;
-}
-
 #ifdef CONFIG_PM_SLEEP
 static int mt6397_rtc_suspend(struct device *dev)
 {
@@ -349,7 +337,6 @@ static struct platform_driver mtk_rtc_driver = {
 		.pm = &mt6397_pm_ops,
 	},
 	.probe	= mtk_rtc_probe,
-	.remove = mtk_rtc_remove,
 };
 
 module_platform_driver(mtk_rtc_driver);
-- 
2.17.1

[PATCH v6 07/13] rtc: mt6397: improvements of rtc driver

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

- use regmap_read_poll_timeout to drop while-loop
- use devm-api to drop remove-callback

Suggested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
changes since v5: none
changes since v4: none
changes since v3: none
changes since v2:
- fix allocation after irq-request
- compatible for mt6323 in separate commit => part 5
---
 drivers/rtc/rtc-mt6397.c | 51 +++++++++++++++-------------------------
 1 file changed, 19 insertions(+), 32 deletions(-)

diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
index c08ee5edf865..9370b7fc9f81 100644
--- a/drivers/rtc/rtc-mt6397.c
+++ b/drivers/rtc/rtc-mt6397.c
@@ -4,16 +4,19 @@
 * Author: Tianping.Fang <tianping.fang@mediatek.com>
 */
 
-#include <linux/delay.h>
-#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/mt6397/core.h>
 #include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/rtc.h>
 #include <linux/mfd/mt6397/rtc.h>
+#include <linux/mod_devicetable.h>
 
 static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
 {
-	unsigned long timeout = jiffies + HZ;
 	int ret;
 	u32 data;
 
@@ -21,19 +24,13 @@ static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
 	if (ret < 0)
 		return ret;
 
-	while (1) {
-		ret = regmap_read(rtc->regmap, rtc->addr_base + RTC_BBPU,
-				  &data);
-		if (ret < 0)
-			break;
-		if (!(data & RTC_BBPU_CBUSY))
-			break;
-		if (time_after(jiffies, timeout)) {
-			ret = -ETIMEDOUT;
-			break;
-		}
-		cpu_relax();
-	}
+	ret = regmap_read_poll_timeout(rtc->regmap,
+					rtc->addr_base + RTC_BBPU, data,
+					!(data & RTC_BBPU_CBUSY),
+					MTK_RTC_POLL_DELAY_US,
+					MTK_RTC_POLL_TIMEOUT);
+	if (ret < 0)
+		dev_err(rtc->dev, "failed to write WRTGE: %d\n", ret);
 
 	return ret;
 }
@@ -266,19 +263,19 @@ static int mtk_rtc_probe(struct platform_device *pdev)
 		return rtc->irq;
 
 	rtc->regmap = mt6397_chip->regmap;
-	rtc->dev = &pdev->dev;
 	mutex_init(&rtc->lock);
 
 	platform_set_drvdata(pdev, rtc);
 
-	rtc->rtc_dev = devm_rtc_allocate_device(rtc->dev);
+	rtc->rtc_dev = devm_rtc_allocate_device(&pdev->dev);
 	if (IS_ERR(rtc->rtc_dev))
 		return PTR_ERR(rtc->rtc_dev);
 
-	ret = request_threaded_irq(rtc->irq, NULL,
-				   mtk_rtc_irq_handler_thread,
-				   IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
-				   "mt6397-rtc", rtc);
+	ret = devm_request_threaded_irq(&pdev->dev, rtc->irq, NULL,
+					mtk_rtc_irq_handler_thread,
+					IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
+					"mt6397-rtc", rtc);
+
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to request alarm IRQ: %d: %d\n",
 			rtc->irq, ret);
@@ -302,15 +299,6 @@ static int mtk_rtc_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int mtk_rtc_remove(struct platform_device *pdev)
-{
-	struct mt6397_rtc *rtc = platform_get_drvdata(pdev);
-
-	free_irq(rtc->irq, rtc);
-
-	return 0;
-}
-
 #ifdef CONFIG_PM_SLEEP
 static int mt6397_rtc_suspend(struct device *dev)
 {
@@ -349,7 +337,6 @@ static struct platform_driver mtk_rtc_driver = {
 		.pm = &mt6397_pm_ops,
 	},
 	.probe	= mtk_rtc_probe,
-	.remove = mtk_rtc_remove,
 };
 
 module_platform_driver(mtk_rtc_driver);
-- 
2.17.1

[PATCH v6 07/13] rtc: mt6397: improvements of rtc driver

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

- use regmap_read_poll_timeout to drop while-loop
- use devm-api to drop remove-callback

Suggested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
changes since v5: none
changes since v4: none
changes since v3: none
changes since v2:
- fix allocation after irq-request
- compatible for mt6323 in separate commit => part 5
---
 drivers/rtc/rtc-mt6397.c | 51 +++++++++++++++-------------------------
 1 file changed, 19 insertions(+), 32 deletions(-)

diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
index c08ee5edf865..9370b7fc9f81 100644
--- a/drivers/rtc/rtc-mt6397.c
+++ b/drivers/rtc/rtc-mt6397.c
@@ -4,16 +4,19 @@
 * Author: Tianping.Fang <tianping.fang@mediatek.com>
 */
 
-#include <linux/delay.h>
-#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/mt6397/core.h>
 #include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/rtc.h>
 #include <linux/mfd/mt6397/rtc.h>
+#include <linux/mod_devicetable.h>
 
 static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
 {
-	unsigned long timeout = jiffies + HZ;
 	int ret;
 	u32 data;
 
@@ -21,19 +24,13 @@ static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
 	if (ret < 0)
 		return ret;
 
-	while (1) {
-		ret = regmap_read(rtc->regmap, rtc->addr_base + RTC_BBPU,
-				  &data);
-		if (ret < 0)
-			break;
-		if (!(data & RTC_BBPU_CBUSY))
-			break;
-		if (time_after(jiffies, timeout)) {
-			ret = -ETIMEDOUT;
-			break;
-		}
-		cpu_relax();
-	}
+	ret = regmap_read_poll_timeout(rtc->regmap,
+					rtc->addr_base + RTC_BBPU, data,
+					!(data & RTC_BBPU_CBUSY),
+					MTK_RTC_POLL_DELAY_US,
+					MTK_RTC_POLL_TIMEOUT);
+	if (ret < 0)
+		dev_err(rtc->dev, "failed to write WRTGE: %d\n", ret);
 
 	return ret;
 }
@@ -266,19 +263,19 @@ static int mtk_rtc_probe(struct platform_device *pdev)
 		return rtc->irq;
 
 	rtc->regmap = mt6397_chip->regmap;
-	rtc->dev = &pdev->dev;
 	mutex_init(&rtc->lock);
 
 	platform_set_drvdata(pdev, rtc);
 
-	rtc->rtc_dev = devm_rtc_allocate_device(rtc->dev);
+	rtc->rtc_dev = devm_rtc_allocate_device(&pdev->dev);
 	if (IS_ERR(rtc->rtc_dev))
 		return PTR_ERR(rtc->rtc_dev);
 
-	ret = request_threaded_irq(rtc->irq, NULL,
-				   mtk_rtc_irq_handler_thread,
-				   IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
-				   "mt6397-rtc", rtc);
+	ret = devm_request_threaded_irq(&pdev->dev, rtc->irq, NULL,
+					mtk_rtc_irq_handler_thread,
+					IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
+					"mt6397-rtc", rtc);
+
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to request alarm IRQ: %d: %d\n",
 			rtc->irq, ret);
@@ -302,15 +299,6 @@ static int mtk_rtc_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int mtk_rtc_remove(struct platform_device *pdev)
-{
-	struct mt6397_rtc *rtc = platform_get_drvdata(pdev);
-
-	free_irq(rtc->irq, rtc);
-
-	return 0;
-}
-
 #ifdef CONFIG_PM_SLEEP
 static int mt6397_rtc_suspend(struct device *dev)
 {
@@ -349,7 +337,6 @@ static struct platform_driver mtk_rtc_driver = {
 		.pm = &mt6397_pm_ops,
 	},
 	.probe	= mtk_rtc_probe,
-	.remove = mtk_rtc_remove,
 };
 
 module_platform_driver(mtk_rtc_driver);
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v6 08/13] mfd: mt6323: some improvements of mt6397-core

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

simplyfications (resource definitions my DEFINE_RES_* macros)

Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
---
changes since v5: none
changes since v4: do not touch year of copyright
changes since v3: moved part 6 forward to let compatible and driver be together
changes since v2: splitted v2 part 4 into 6+7
---
 drivers/mfd/mt6397-core.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
index 337bcccdb914..c9a81087fa55 100644
--- a/drivers/mfd/mt6397-core.c
+++ b/drivers/mfd/mt6397-core.c
@@ -5,6 +5,7 @@
  */
 
 #include <linux/interrupt.h>
+#include <linux/ioport.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
@@ -23,16 +24,8 @@
 #define MT6397_CID_CODE		0x97
 
 static const struct resource mt6397_rtc_resources[] = {
-	{
-		.start = MT6397_RTC_BASE,
-		.end   = MT6397_RTC_BASE + MT6397_RTC_SIZE,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = MT6397_IRQ_RTC,
-		.end   = MT6397_IRQ_RTC,
-		.flags = IORESOURCE_IRQ,
-	},
+	DEFINE_RES_MEM(MT6397_RTC_BASE, MT6397_RTC_SIZE),
+	DEFINE_RES_IRQ(MT6397_IRQ_RTC),
 };
 
 static const struct resource mt6323_keys_resources[] = {
-- 
2.17.1

[PATCH v6 08/13] mfd: mt6323: some improvements of mt6397-core

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

simplyfications (resource definitions my DEFINE_RES_* macros)

Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
---
changes since v5: none
changes since v4: do not touch year of copyright
changes since v3: moved part 6 forward to let compatible and driver be together
changes since v2: splitted v2 part 4 into 6+7
---
 drivers/mfd/mt6397-core.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
index 337bcccdb914..c9a81087fa55 100644
--- a/drivers/mfd/mt6397-core.c
+++ b/drivers/mfd/mt6397-core.c
@@ -5,6 +5,7 @@
  */
 
 #include <linux/interrupt.h>
+#include <linux/ioport.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
@@ -23,16 +24,8 @@
 #define MT6397_CID_CODE		0x97
 
 static const struct resource mt6397_rtc_resources[] = {
-	{
-		.start = MT6397_RTC_BASE,
-		.end   = MT6397_RTC_BASE + MT6397_RTC_SIZE,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = MT6397_IRQ_RTC,
-		.end   = MT6397_IRQ_RTC,
-		.flags = IORESOURCE_IRQ,
-	},
+	DEFINE_RES_MEM(MT6397_RTC_BASE, MT6397_RTC_SIZE),
+	DEFINE_RES_IRQ(MT6397_IRQ_RTC),
 };
 
 static const struct resource mt6323_keys_resources[] = {
-- 
2.17.1

[PATCH v6 08/13] mfd: mt6323: some improvements of mt6397-core

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

simplyfications (resource definitions my DEFINE_RES_* macros)

Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
---
changes since v5: none
changes since v4: do not touch year of copyright
changes since v3: moved part 6 forward to let compatible and driver be together
changes since v2: splitted v2 part 4 into 6+7
---
 drivers/mfd/mt6397-core.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
index 337bcccdb914..c9a81087fa55 100644
--- a/drivers/mfd/mt6397-core.c
+++ b/drivers/mfd/mt6397-core.c
@@ -5,6 +5,7 @@
  */
 
 #include <linux/interrupt.h>
+#include <linux/ioport.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
@@ -23,16 +24,8 @@
 #define MT6397_CID_CODE		0x97
 
 static const struct resource mt6397_rtc_resources[] = {
-	{
-		.start = MT6397_RTC_BASE,
-		.end   = MT6397_RTC_BASE + MT6397_RTC_SIZE,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = MT6397_IRQ_RTC,
-		.end   = MT6397_IRQ_RTC,
-		.flags = IORESOURCE_IRQ,
-	},
+	DEFINE_RES_MEM(MT6397_RTC_BASE, MT6397_RTC_SIZE),
+	DEFINE_RES_IRQ(MT6397_IRQ_RTC),
 };
 
 static const struct resource mt6323_keys_resources[] = {
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v6 09/13] rtc: mt6397: add compatible for mt6323

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

use mt6397 rtc driver also for mt6323 but with different
base/size see "mfd: mt6323: add mt6323 rtc+pwrc"

Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
changes since v5: none
changes since v4: none
changes since v3: moved (was part 5)
changes since v2: splitted this from v2.3 suggested-by Alexandre Belloni
---
 drivers/rtc/rtc-mt6397.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
index 9370b7fc9f81..21cd9cc8b4c7 100644
--- a/drivers/rtc/rtc-mt6397.c
+++ b/drivers/rtc/rtc-mt6397.c
@@ -325,6 +325,7 @@ static SIMPLE_DEV_PM_OPS(mt6397_pm_ops, mt6397_rtc_suspend,
 			mt6397_rtc_resume);
 
 static const struct of_device_id mt6397_rtc_of_match[] = {
+	{ .compatible = "mediatek,mt6323-rtc", },
 	{ .compatible = "mediatek,mt6397-rtc", },
 	{ }
 };
-- 
2.17.1

[PATCH v6 09/13] rtc: mt6397: add compatible for mt6323

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

use mt6397 rtc driver also for mt6323 but with different
base/size see "mfd: mt6323: add mt6323 rtc+pwrc"

Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
changes since v5: none
changes since v4: none
changes since v3: moved (was part 5)
changes since v2: splitted this from v2.3 suggested-by Alexandre Belloni
---
 drivers/rtc/rtc-mt6397.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
index 9370b7fc9f81..21cd9cc8b4c7 100644
--- a/drivers/rtc/rtc-mt6397.c
+++ b/drivers/rtc/rtc-mt6397.c
@@ -325,6 +325,7 @@ static SIMPLE_DEV_PM_OPS(mt6397_pm_ops, mt6397_rtc_suspend,
 			mt6397_rtc_resume);
 
 static const struct of_device_id mt6397_rtc_of_match[] = {
+	{ .compatible = "mediatek,mt6323-rtc", },
 	{ .compatible = "mediatek,mt6397-rtc", },
 	{ }
 };
-- 
2.17.1

[PATCH v6 09/13] rtc: mt6397: add compatible for mt6323

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

use mt6397 rtc driver also for mt6323 but with different
base/size see "mfd: mt6323: add mt6323 rtc+pwrc"

Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
changes since v5: none
changes since v4: none
changes since v3: moved (was part 5)
changes since v2: splitted this from v2.3 suggested-by Alexandre Belloni
---
 drivers/rtc/rtc-mt6397.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
index 9370b7fc9f81..21cd9cc8b4c7 100644
--- a/drivers/rtc/rtc-mt6397.c
+++ b/drivers/rtc/rtc-mt6397.c
@@ -325,6 +325,7 @@ static SIMPLE_DEV_PM_OPS(mt6397_pm_ops, mt6397_rtc_suspend,
 			mt6397_rtc_resume);
 
 static const struct of_device_id mt6397_rtc_of_match[] = {
+	{ .compatible = "mediatek,mt6323-rtc", },
 	{ .compatible = "mediatek,mt6397-rtc", },
 	{ }
 };
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v6 10/13] mfd: mt6323: add mt6323 rtc+pwrc

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

add entry for rtc and power-controller to mt6323

Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
---
changes since v5: none
changes since v4: none
changes since v3: none
changes since v2: only splitting, second part of v2 part 4
---
 drivers/mfd/mt6397-core.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
index c9a81087fa55..5916978a8feb 100644
--- a/drivers/mfd/mt6397-core.c
+++ b/drivers/mfd/mt6397-core.c
@@ -16,13 +16,24 @@
 #include <linux/mfd/mt6397/registers.h>
 #include <linux/mfd/mt6323/registers.h>
 
+#define MT6323_RTC_BASE		0x8000
+#define MT6323_RTC_SIZE		0x40
+
 #define MT6397_RTC_BASE		0xe000
 #define MT6397_RTC_SIZE		0x3e
 
+#define MT6323_PWRC_BASE	0x8000
+#define MT6323_PWRC_SIZE	0x40
+
 #define MT6323_CID_CODE		0x23
 #define MT6391_CID_CODE		0x91
 #define MT6397_CID_CODE		0x97
 
+static const struct resource mt6323_rtc_resources[] = {
+	DEFINE_RES_MEM(MT6323_RTC_BASE, MT6323_RTC_SIZE),
+	DEFINE_RES_IRQ(MT6323_IRQ_STATUS_RTC),
+};
+
 static const struct resource mt6397_rtc_resources[] = {
 	DEFINE_RES_MEM(MT6397_RTC_BASE, MT6397_RTC_SIZE),
 	DEFINE_RES_IRQ(MT6397_IRQ_RTC),
@@ -38,8 +49,17 @@ static const struct resource mt6397_keys_resources[] = {
 	DEFINE_RES_IRQ(MT6397_IRQ_HOMEKEY),
 };
 
+static const struct resource mt6323_pwrc_resources[] = {
+	DEFINE_RES_MEM(MT6323_PWRC_BASE, MT6323_PWRC_SIZE),
+};
+
 static const struct mfd_cell mt6323_devs[] = {
 	{
+		.name = "mt6323-rtc",
+		.num_resources = ARRAY_SIZE(mt6323_rtc_resources),
+		.resources = mt6323_rtc_resources,
+		.of_compatible = "mediatek,mt6323-rtc",
+	}, {
 		.name = "mt6323-regulator",
 		.of_compatible = "mediatek,mt6323-regulator"
 	}, {
@@ -50,6 +70,11 @@ static const struct mfd_cell mt6323_devs[] = {
 		.num_resources = ARRAY_SIZE(mt6323_keys_resources),
 		.resources = mt6323_keys_resources,
 		.of_compatible = "mediatek,mt6323-keys"
+	}, {
+		.name = "mt6323-pwrc",
+		.num_resources = ARRAY_SIZE(mt6323_pwrc_resources),
+		.resources = mt6323_pwrc_resources,
+		.of_compatible = "mediatek,mt6323-pwrc"
 	},
 };
 
-- 
2.17.1

[PATCH v6 10/13] mfd: mt6323: add mt6323 rtc+pwrc

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

add entry for rtc and power-controller to mt6323

Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
---
changes since v5: none
changes since v4: none
changes since v3: none
changes since v2: only splitting, second part of v2 part 4
---
 drivers/mfd/mt6397-core.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
index c9a81087fa55..5916978a8feb 100644
--- a/drivers/mfd/mt6397-core.c
+++ b/drivers/mfd/mt6397-core.c
@@ -16,13 +16,24 @@
 #include <linux/mfd/mt6397/registers.h>
 #include <linux/mfd/mt6323/registers.h>
 
+#define MT6323_RTC_BASE		0x8000
+#define MT6323_RTC_SIZE		0x40
+
 #define MT6397_RTC_BASE		0xe000
 #define MT6397_RTC_SIZE		0x3e
 
+#define MT6323_PWRC_BASE	0x8000
+#define MT6323_PWRC_SIZE	0x40
+
 #define MT6323_CID_CODE		0x23
 #define MT6391_CID_CODE		0x91
 #define MT6397_CID_CODE		0x97
 
+static const struct resource mt6323_rtc_resources[] = {
+	DEFINE_RES_MEM(MT6323_RTC_BASE, MT6323_RTC_SIZE),
+	DEFINE_RES_IRQ(MT6323_IRQ_STATUS_RTC),
+};
+
 static const struct resource mt6397_rtc_resources[] = {
 	DEFINE_RES_MEM(MT6397_RTC_BASE, MT6397_RTC_SIZE),
 	DEFINE_RES_IRQ(MT6397_IRQ_RTC),
@@ -38,8 +49,17 @@ static const struct resource mt6397_keys_resources[] = {
 	DEFINE_RES_IRQ(MT6397_IRQ_HOMEKEY),
 };
 
+static const struct resource mt6323_pwrc_resources[] = {
+	DEFINE_RES_MEM(MT6323_PWRC_BASE, MT6323_PWRC_SIZE),
+};
+
 static const struct mfd_cell mt6323_devs[] = {
 	{
+		.name = "mt6323-rtc",
+		.num_resources = ARRAY_SIZE(mt6323_rtc_resources),
+		.resources = mt6323_rtc_resources,
+		.of_compatible = "mediatek,mt6323-rtc",
+	}, {
 		.name = "mt6323-regulator",
 		.of_compatible = "mediatek,mt6323-regulator"
 	}, {
@@ -50,6 +70,11 @@ static const struct mfd_cell mt6323_devs[] = {
 		.num_resources = ARRAY_SIZE(mt6323_keys_resources),
 		.resources = mt6323_keys_resources,
 		.of_compatible = "mediatek,mt6323-keys"
+	}, {
+		.name = "mt6323-pwrc",
+		.num_resources = ARRAY_SIZE(mt6323_pwrc_resources),
+		.resources = mt6323_pwrc_resources,
+		.of_compatible = "mediatek,mt6323-pwrc"
 	},
 };
 
-- 
2.17.1

[PATCH v6 10/13] mfd: mt6323: add mt6323 rtc+pwrc

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

add entry for rtc and power-controller to mt6323

Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
---
changes since v5: none
changes since v4: none
changes since v3: none
changes since v2: only splitting, second part of v2 part 4
---
 drivers/mfd/mt6397-core.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/mfd/mt6397-core.c b/drivers/mfd/mt6397-core.c
index c9a81087fa55..5916978a8feb 100644
--- a/drivers/mfd/mt6397-core.c
+++ b/drivers/mfd/mt6397-core.c
@@ -16,13 +16,24 @@
 #include <linux/mfd/mt6397/registers.h>
 #include <linux/mfd/mt6323/registers.h>
 
+#define MT6323_RTC_BASE		0x8000
+#define MT6323_RTC_SIZE		0x40
+
 #define MT6397_RTC_BASE		0xe000
 #define MT6397_RTC_SIZE		0x3e
 
+#define MT6323_PWRC_BASE	0x8000
+#define MT6323_PWRC_SIZE	0x40
+
 #define MT6323_CID_CODE		0x23
 #define MT6391_CID_CODE		0x91
 #define MT6397_CID_CODE		0x97
 
+static const struct resource mt6323_rtc_resources[] = {
+	DEFINE_RES_MEM(MT6323_RTC_BASE, MT6323_RTC_SIZE),
+	DEFINE_RES_IRQ(MT6323_IRQ_STATUS_RTC),
+};
+
 static const struct resource mt6397_rtc_resources[] = {
 	DEFINE_RES_MEM(MT6397_RTC_BASE, MT6397_RTC_SIZE),
 	DEFINE_RES_IRQ(MT6397_IRQ_RTC),
@@ -38,8 +49,17 @@ static const struct resource mt6397_keys_resources[] = {
 	DEFINE_RES_IRQ(MT6397_IRQ_HOMEKEY),
 };
 
+static const struct resource mt6323_pwrc_resources[] = {
+	DEFINE_RES_MEM(MT6323_PWRC_BASE, MT6323_PWRC_SIZE),
+};
+
 static const struct mfd_cell mt6323_devs[] = {
 	{
+		.name = "mt6323-rtc",
+		.num_resources = ARRAY_SIZE(mt6323_rtc_resources),
+		.resources = mt6323_rtc_resources,
+		.of_compatible = "mediatek,mt6323-rtc",
+	}, {
 		.name = "mt6323-regulator",
 		.of_compatible = "mediatek,mt6323-regulator"
 	}, {
@@ -50,6 +70,11 @@ static const struct mfd_cell mt6323_devs[] = {
 		.num_resources = ARRAY_SIZE(mt6323_keys_resources),
 		.resources = mt6323_keys_resources,
 		.of_compatible = "mediatek,mt6323-keys"
+	}, {
+		.name = "mt6323-pwrc",
+		.num_resources = ARRAY_SIZE(mt6323_pwrc_resources),
+		.resources = mt6323_pwrc_resources,
+		.of_compatible = "mediatek,mt6323-pwrc"
 	},
 };
 
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v6 11/13] power: reset: add driver for mt6323 poweroff

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

add poweroff driver for mt6323 and make Makefile and Kconfig-Entries

Suggested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
changes since v5: split out mfd/mt6397/core.h
changes since v4: none
changes since v3: none
changes since v2: none (=v2 part 5)
---
 drivers/power/reset/Kconfig           | 10 +++
 drivers/power/reset/Makefile          |  1 +
 drivers/power/reset/mt6323-poweroff.c | 97 +++++++++++++++++++++++++++
 3 files changed, 108 insertions(+)
 create mode 100644 drivers/power/reset/mt6323-poweroff.c

diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index a564237278ff..c721939767eb 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -140,6 +140,16 @@ config POWER_RESET_LTC2952
 	  This driver supports an external powerdown trigger and board power
 	  down via the LTC2952. Bindings are made in the device tree.
 
+config POWER_RESET_MT6323
+       bool "MediaTek MT6323 power-off driver"
+       depends on MFD_MT6397
+       help
+         The power-off driver is responsible for externally shutdown down
+         the power of a remote MediaTek SoC MT6323 is connected to through
+         controlling a tiny circuit BBPU inside MT6323 RTC.
+
+         Say Y if you have a board where MT6323 could be found.
+
 config POWER_RESET_QNAP
 	bool "QNAP power-off driver"
 	depends on OF_GPIO && PLAT_ORION
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index 85da3198e4e0..da37f8b851dc 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
 obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
 obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
 obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
+obj-$(CONFIG_POWER_RESET_MT6323) += mt6323-poweroff.o
 obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o
 obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o
 obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o
diff --git a/drivers/power/reset/mt6323-poweroff.c b/drivers/power/reset/mt6323-poweroff.c
new file mode 100644
index 000000000000..1caf43d9e46d
--- /dev/null
+++ b/drivers/power/reset/mt6323-poweroff.c
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Power off through MediaTek PMIC
+ *
+ * Copyright (C) 2018 MediaTek Inc.
+ *
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/mt6397/core.h>
+#include <linux/mfd/mt6397/rtc.h>
+
+struct mt6323_pwrc {
+	struct device *dev;
+	struct regmap *regmap;
+	u32 base;
+};
+
+static struct mt6323_pwrc *mt_pwrc;
+
+static void mt6323_do_pwroff(void)
+{
+	struct mt6323_pwrc *pwrc = mt_pwrc;
+	unsigned int val;
+	int ret;
+
+	regmap_write(pwrc->regmap, pwrc->base + RTC_BBPU, RTC_BBPU_KEY);
+	regmap_write(pwrc->regmap, pwrc->base + RTC_WRTGR, 1);
+
+	ret = regmap_read_poll_timeout(pwrc->regmap,
+					pwrc->base + RTC_BBPU, val,
+					!(val & RTC_BBPU_CBUSY),
+					MTK_RTC_POLL_DELAY_US,
+					MTK_RTC_POLL_TIMEOUT);
+	if (ret)
+		dev_err(pwrc->dev, "failed to write BBPU: %d\n", ret);
+
+	/* Wait some time until system down, otherwise, notice with a warn */
+	mdelay(1000);
+
+	WARN_ONCE(1, "Unable to power off system\n");
+}
+
+static int mt6323_pwrc_probe(struct platform_device *pdev)
+{
+	struct mt6397_chip *mt6397_chip = dev_get_drvdata(pdev->dev.parent);
+	struct mt6323_pwrc *pwrc;
+	struct resource *res;
+
+	pwrc = devm_kzalloc(&pdev->dev, sizeof(*pwrc), GFP_KERNEL);
+	if (!pwrc)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pwrc->base = res->start;
+	pwrc->regmap = mt6397_chip->regmap;
+	pwrc->dev = &pdev->dev;
+	mt_pwrc = pwrc;
+
+	pm_power_off = &mt6323_do_pwroff;
+
+	return 0;
+}
+
+static int mt6323_pwrc_remove(struct platform_device *pdev)
+{
+	if (pm_power_off == &mt6323_do_pwroff)
+		pm_power_off = NULL;
+
+	return 0;
+}
+
+static const struct of_device_id mt6323_pwrc_dt_match[] = {
+	{ .compatible = "mediatek,mt6323-pwrc" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mt6323_pwrc_dt_match);
+
+static struct platform_driver mt6323_pwrc_driver = {
+	.probe          = mt6323_pwrc_probe,
+	.remove         = mt6323_pwrc_remove,
+	.driver         = {
+		.name   = "mt6323-pwrc",
+		.of_match_table = mt6323_pwrc_dt_match,
+	},
+};
+
+module_platform_driver(mt6323_pwrc_driver);
+
+MODULE_DESCRIPTION("Poweroff driver for MT6323 PMIC");
+MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
+MODULE_LICENSE("GPL v2");
-- 
2.17.1

[PATCH v6 11/13] power: reset: add driver for mt6323 poweroff

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

add poweroff driver for mt6323 and make Makefile and Kconfig-Entries

Suggested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
changes since v5: split out mfd/mt6397/core.h
changes since v4: none
changes since v3: none
changes since v2: none (=v2 part 5)
---
 drivers/power/reset/Kconfig           | 10 +++
 drivers/power/reset/Makefile          |  1 +
 drivers/power/reset/mt6323-poweroff.c | 97 +++++++++++++++++++++++++++
 3 files changed, 108 insertions(+)
 create mode 100644 drivers/power/reset/mt6323-poweroff.c

diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index a564237278ff..c721939767eb 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -140,6 +140,16 @@ config POWER_RESET_LTC2952
 	  This driver supports an external powerdown trigger and board power
 	  down via the LTC2952. Bindings are made in the device tree.
 
+config POWER_RESET_MT6323
+       bool "MediaTek MT6323 power-off driver"
+       depends on MFD_MT6397
+       help
+         The power-off driver is responsible for externally shutdown down
+         the power of a remote MediaTek SoC MT6323 is connected to through
+         controlling a tiny circuit BBPU inside MT6323 RTC.
+
+         Say Y if you have a board where MT6323 could be found.
+
 config POWER_RESET_QNAP
 	bool "QNAP power-off driver"
 	depends on OF_GPIO && PLAT_ORION
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index 85da3198e4e0..da37f8b851dc 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
 obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
 obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
 obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
+obj-$(CONFIG_POWER_RESET_MT6323) += mt6323-poweroff.o
 obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o
 obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o
 obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o
diff --git a/drivers/power/reset/mt6323-poweroff.c b/drivers/power/reset/mt6323-poweroff.c
new file mode 100644
index 000000000000..1caf43d9e46d
--- /dev/null
+++ b/drivers/power/reset/mt6323-poweroff.c
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Power off through MediaTek PMIC
+ *
+ * Copyright (C) 2018 MediaTek Inc.
+ *
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/mt6397/core.h>
+#include <linux/mfd/mt6397/rtc.h>
+
+struct mt6323_pwrc {
+	struct device *dev;
+	struct regmap *regmap;
+	u32 base;
+};
+
+static struct mt6323_pwrc *mt_pwrc;
+
+static void mt6323_do_pwroff(void)
+{
+	struct mt6323_pwrc *pwrc = mt_pwrc;
+	unsigned int val;
+	int ret;
+
+	regmap_write(pwrc->regmap, pwrc->base + RTC_BBPU, RTC_BBPU_KEY);
+	regmap_write(pwrc->regmap, pwrc->base + RTC_WRTGR, 1);
+
+	ret = regmap_read_poll_timeout(pwrc->regmap,
+					pwrc->base + RTC_BBPU, val,
+					!(val & RTC_BBPU_CBUSY),
+					MTK_RTC_POLL_DELAY_US,
+					MTK_RTC_POLL_TIMEOUT);
+	if (ret)
+		dev_err(pwrc->dev, "failed to write BBPU: %d\n", ret);
+
+	/* Wait some time until system down, otherwise, notice with a warn */
+	mdelay(1000);
+
+	WARN_ONCE(1, "Unable to power off system\n");
+}
+
+static int mt6323_pwrc_probe(struct platform_device *pdev)
+{
+	struct mt6397_chip *mt6397_chip = dev_get_drvdata(pdev->dev.parent);
+	struct mt6323_pwrc *pwrc;
+	struct resource *res;
+
+	pwrc = devm_kzalloc(&pdev->dev, sizeof(*pwrc), GFP_KERNEL);
+	if (!pwrc)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pwrc->base = res->start;
+	pwrc->regmap = mt6397_chip->regmap;
+	pwrc->dev = &pdev->dev;
+	mt_pwrc = pwrc;
+
+	pm_power_off = &mt6323_do_pwroff;
+
+	return 0;
+}
+
+static int mt6323_pwrc_remove(struct platform_device *pdev)
+{
+	if (pm_power_off == &mt6323_do_pwroff)
+		pm_power_off = NULL;
+
+	return 0;
+}
+
+static const struct of_device_id mt6323_pwrc_dt_match[] = {
+	{ .compatible = "mediatek,mt6323-pwrc" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mt6323_pwrc_dt_match);
+
+static struct platform_driver mt6323_pwrc_driver = {
+	.probe          = mt6323_pwrc_probe,
+	.remove         = mt6323_pwrc_remove,
+	.driver         = {
+		.name   = "mt6323-pwrc",
+		.of_match_table = mt6323_pwrc_dt_match,
+	},
+};
+
+module_platform_driver(mt6323_pwrc_driver);
+
+MODULE_DESCRIPTION("Poweroff driver for MT6323 PMIC");
+MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
+MODULE_LICENSE("GPL v2");
-- 
2.17.1

[PATCH v6 11/13] power: reset: add driver for mt6323 poweroff

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

add poweroff driver for mt6323 and make Makefile and Kconfig-Entries

Suggested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
changes since v5: split out mfd/mt6397/core.h
changes since v4: none
changes since v3: none
changes since v2: none (=v2 part 5)
---
 drivers/power/reset/Kconfig           | 10 +++
 drivers/power/reset/Makefile          |  1 +
 drivers/power/reset/mt6323-poweroff.c | 97 +++++++++++++++++++++++++++
 3 files changed, 108 insertions(+)
 create mode 100644 drivers/power/reset/mt6323-poweroff.c

diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index a564237278ff..c721939767eb 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -140,6 +140,16 @@ config POWER_RESET_LTC2952
 	  This driver supports an external powerdown trigger and board power
 	  down via the LTC2952. Bindings are made in the device tree.
 
+config POWER_RESET_MT6323
+       bool "MediaTek MT6323 power-off driver"
+       depends on MFD_MT6397
+       help
+         The power-off driver is responsible for externally shutdown down
+         the power of a remote MediaTek SoC MT6323 is connected to through
+         controlling a tiny circuit BBPU inside MT6323 RTC.
+
+         Say Y if you have a board where MT6323 could be found.
+
 config POWER_RESET_QNAP
 	bool "QNAP power-off driver"
 	depends on OF_GPIO && PLAT_ORION
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index 85da3198e4e0..da37f8b851dc 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
 obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
 obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
 obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
+obj-$(CONFIG_POWER_RESET_MT6323) += mt6323-poweroff.o
 obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o
 obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o
 obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o
diff --git a/drivers/power/reset/mt6323-poweroff.c b/drivers/power/reset/mt6323-poweroff.c
new file mode 100644
index 000000000000..1caf43d9e46d
--- /dev/null
+++ b/drivers/power/reset/mt6323-poweroff.c
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Power off through MediaTek PMIC
+ *
+ * Copyright (C) 2018 MediaTek Inc.
+ *
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/mt6397/core.h>
+#include <linux/mfd/mt6397/rtc.h>
+
+struct mt6323_pwrc {
+	struct device *dev;
+	struct regmap *regmap;
+	u32 base;
+};
+
+static struct mt6323_pwrc *mt_pwrc;
+
+static void mt6323_do_pwroff(void)
+{
+	struct mt6323_pwrc *pwrc = mt_pwrc;
+	unsigned int val;
+	int ret;
+
+	regmap_write(pwrc->regmap, pwrc->base + RTC_BBPU, RTC_BBPU_KEY);
+	regmap_write(pwrc->regmap, pwrc->base + RTC_WRTGR, 1);
+
+	ret = regmap_read_poll_timeout(pwrc->regmap,
+					pwrc->base + RTC_BBPU, val,
+					!(val & RTC_BBPU_CBUSY),
+					MTK_RTC_POLL_DELAY_US,
+					MTK_RTC_POLL_TIMEOUT);
+	if (ret)
+		dev_err(pwrc->dev, "failed to write BBPU: %d\n", ret);
+
+	/* Wait some time until system down, otherwise, notice with a warn */
+	mdelay(1000);
+
+	WARN_ONCE(1, "Unable to power off system\n");
+}
+
+static int mt6323_pwrc_probe(struct platform_device *pdev)
+{
+	struct mt6397_chip *mt6397_chip = dev_get_drvdata(pdev->dev.parent);
+	struct mt6323_pwrc *pwrc;
+	struct resource *res;
+
+	pwrc = devm_kzalloc(&pdev->dev, sizeof(*pwrc), GFP_KERNEL);
+	if (!pwrc)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pwrc->base = res->start;
+	pwrc->regmap = mt6397_chip->regmap;
+	pwrc->dev = &pdev->dev;
+	mt_pwrc = pwrc;
+
+	pm_power_off = &mt6323_do_pwroff;
+
+	return 0;
+}
+
+static int mt6323_pwrc_remove(struct platform_device *pdev)
+{
+	if (pm_power_off == &mt6323_do_pwroff)
+		pm_power_off = NULL;
+
+	return 0;
+}
+
+static const struct of_device_id mt6323_pwrc_dt_match[] = {
+	{ .compatible = "mediatek,mt6323-pwrc" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mt6323_pwrc_dt_match);
+
+static struct platform_driver mt6323_pwrc_driver = {
+	.probe          = mt6323_pwrc_probe,
+	.remove         = mt6323_pwrc_remove,
+	.driver         = {
+		.name   = "mt6323-pwrc",
+		.of_match_table = mt6323_pwrc_dt_match,
+	},
+};
+
+module_platform_driver(mt6323_pwrc_driver);
+
+MODULE_DESCRIPTION("Poweroff driver for MT6323 PMIC");
+MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
+MODULE_LICENSE("GPL v2");
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v6 12/13] MAINTAINERS: add Mediatek shutdown drivers

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

add Section in MAINTAINERS file for poweroff driver

Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
changes since v5: none
changes since v4: none
changes since v3: moved SOB
changes since v2: none (=v2 part 6)
---
 MAINTAINERS | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 6426db5198f0..4172a3177633 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10128,6 +10128,13 @@ S:	Maintained
 F:	drivers/net/dsa/mt7530.*
 F:	net/dsa/tag_mtk.c
 
+MEDIATEK BOARD LEVEL SHUTDOWN DRIVERS
+M:	Sean Wang <sean.wang@mediatek.com>
+L:	linux-pm@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
+F:	drivers/power/reset/mt6323-poweroff.c
+
 MEDIATEK JPEG DRIVER
 M:	Rick Chang <rick.chang@mediatek.com>
 M:	Bin Liu <bin.liu@mediatek.com>
-- 
2.17.1

[PATCH v6 12/13] MAINTAINERS: add Mediatek shutdown drivers

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

add Section in MAINTAINERS file for poweroff driver

Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
changes since v5: none
changes since v4: none
changes since v3: moved SOB
changes since v2: none (=v2 part 6)
---
 MAINTAINERS | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 6426db5198f0..4172a3177633 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10128,6 +10128,13 @@ S:	Maintained
 F:	drivers/net/dsa/mt7530.*
 F:	net/dsa/tag_mtk.c
 
+MEDIATEK BOARD LEVEL SHUTDOWN DRIVERS
+M:	Sean Wang <sean.wang@mediatek.com>
+L:	linux-pm@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
+F:	drivers/power/reset/mt6323-poweroff.c
+
 MEDIATEK JPEG DRIVER
 M:	Rick Chang <rick.chang@mediatek.com>
 M:	Bin Liu <bin.liu@mediatek.com>
-- 
2.17.1

[PATCH v6 12/13] MAINTAINERS: add Mediatek shutdown drivers

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

add Section in MAINTAINERS file for poweroff driver

Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
changes since v5: none
changes since v4: none
changes since v3: moved SOB
changes since v2: none (=v2 part 6)
---
 MAINTAINERS | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 6426db5198f0..4172a3177633 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10128,6 +10128,13 @@ S:	Maintained
 F:	drivers/net/dsa/mt7530.*
 F:	net/dsa/tag_mtk.c
 
+MEDIATEK BOARD LEVEL SHUTDOWN DRIVERS
+M:	Sean Wang <sean.wang@mediatek.com>
+L:	linux-pm@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
+F:	drivers/power/reset/mt6323-poweroff.c
+
 MEDIATEK JPEG DRIVER
 M:	Rick Chang <rick.chang@mediatek.com>
 M:	Bin Liu <bin.liu@mediatek.com>
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v6 13/13] arm: dts: mt6323: add keys, power-controller, rtc and codec

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

support poweroff and power-related keys on bpi-r2

Suggested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
changes since v5: none
changes since v4: none
changes since v3: none
changes since v2: none (=v2 part 7)
---
 arch/arm/boot/dts/mt6323.dtsi | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/arch/arm/boot/dts/mt6323.dtsi b/arch/arm/boot/dts/mt6323.dtsi
index ba397407c1dd..7fda40ab5fe8 100644
--- a/arch/arm/boot/dts/mt6323.dtsi
+++ b/arch/arm/boot/dts/mt6323.dtsi
@@ -238,5 +238,32 @@
 				regulator-enable-ramp-delay = <216>;
 			};
 		};
+
+		mt6323keys: mt6323keys {
+			compatible = "mediatek,mt6323-keys";
+			mediatek,long-press-mode = <1>;
+			power-off-time-sec = <0>;
+
+			power {
+				linux,keycodes = <116>;
+				wakeup-source;
+			};
+
+			home {
+				linux,keycodes = <114>;
+			};
+		};
+
+		codec: mt6397codec {
+			compatible = "mediatek,mt6397-codec";
+		};
+
+		power-controller {
+			compatible = "mediatek,mt6323-pwrc";
+		};
+
+		rtc {
+			compatible = "mediatek,mt6323-rtc";
+		};
 	};
 };
-- 
2.17.1

[PATCH v6 13/13] arm: dts: mt6323: add keys, power-controller, rtc and codec

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

support poweroff and power-related keys on bpi-r2

Suggested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
changes since v5: none
changes since v4: none
changes since v3: none
changes since v2: none (=v2 part 7)
---
 arch/arm/boot/dts/mt6323.dtsi | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/arch/arm/boot/dts/mt6323.dtsi b/arch/arm/boot/dts/mt6323.dtsi
index ba397407c1dd..7fda40ab5fe8 100644
--- a/arch/arm/boot/dts/mt6323.dtsi
+++ b/arch/arm/boot/dts/mt6323.dtsi
@@ -238,5 +238,32 @@
 				regulator-enable-ramp-delay = <216>;
 			};
 		};
+
+		mt6323keys: mt6323keys {
+			compatible = "mediatek,mt6323-keys";
+			mediatek,long-press-mode = <1>;
+			power-off-time-sec = <0>;
+
+			power {
+				linux,keycodes = <116>;
+				wakeup-source;
+			};
+
+			home {
+				linux,keycodes = <114>;
+			};
+		};
+
+		codec: mt6397codec {
+			compatible = "mediatek,mt6397-codec";
+		};
+
+		power-controller {
+			compatible = "mediatek,mt6323-pwrc";
+		};
+
+		rtc {
+			compatible = "mediatek,mt6323-rtc";
+		};
 	};
 };
-- 
2.17.1

[PATCH v6 13/13] arm: dts: mt6323: add keys, power-controller, rtc and codec

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

support poweroff and power-related keys on bpi-r2

Suggested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
changes since v5: none
changes since v4: none
changes since v3: none
changes since v2: none (=v2 part 7)
---
 arch/arm/boot/dts/mt6323.dtsi | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/arch/arm/boot/dts/mt6323.dtsi b/arch/arm/boot/dts/mt6323.dtsi
index ba397407c1dd..7fda40ab5fe8 100644
--- a/arch/arm/boot/dts/mt6323.dtsi
+++ b/arch/arm/boot/dts/mt6323.dtsi
@@ -238,5 +238,32 @@
 				regulator-enable-ramp-delay = <216>;
 			};
 		};
+
+		mt6323keys: mt6323keys {
+			compatible = "mediatek,mt6323-keys";
+			mediatek,long-press-mode = <1>;
+			power-off-time-sec = <0>;
+
+			power {
+				linux,keycodes = <116>;
+				wakeup-source;
+			};
+
+			home {
+				linux,keycodes = <114>;
+			};
+		};
+
+		codec: mt6397codec {
+			compatible = "mediatek,mt6397-codec";
+		};
+
+		power-controller {
+			compatible = "mediatek,mt6323-pwrc";
+		};
+
+		rtc {
+			compatible = "mediatek,mt6323-rtc";
+		};
 	};
 };
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v6 00/13] implement poweroff for mt6323 / bpi-r2

[Frank Wunderlich]

Arg, missed a comma between

linux-arm-kernel@lists.infradead.org
 and
Alessandro Zummo

Will send the series to linux-arm-kernel later

Sorry for that

Re: [PATCH v6 00/13] implement poweroff for mt6323 / bpi-r2

[Frank Wunderlich]

Arg, missed a comma between

linux-arm-kernel@lists.infradead.org
 and
Alessandro Zummo

Will send the series to linux-arm-kernel later

Sorry for that

Re: [PATCH v6 00/13] implement poweroff for mt6323 / bpi-r2

[Frank Wunderlich]

Arg, missed a comma between

linux-arm-kernel@lists.infradead.org
 and
Alessandro Zummo

Will send the series to linux-arm-kernel later

Sorry for that

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v6 05/13] rtc: mt6397: move some common definitions into rtc.h

[Alexandre Belloni]

On 18/08/2019 15:56:03+0200, Frank Wunderlich wrote:
> From: Josef Friedl <josef.friedl@speed.at>
> 
> move code to separate header-file to reuse definitions later
> in poweroff-driver (drivers/power/reset/mt6323-poweroff.c)
> 
> Suggested-by: Frank Wunderlich <frank-w@public-files.de>
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

> ---
> changes since v5: none
> changes since v4: none
> changes since v3: none
> changes since v2: add missing commit-message
> ---
>  drivers/rtc/rtc-mt6397.c       | 55 +-------------------------
>  include/linux/mfd/mt6397/rtc.h | 71 ++++++++++++++++++++++++++++++++++
>  2 files changed, 72 insertions(+), 54 deletions(-)
>  create mode 100644 include/linux/mfd/mt6397/rtc.h
> 
> diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
> index b46ed4dc7015..c08ee5edf865 100644
> --- a/drivers/rtc/rtc-mt6397.c
> +++ b/drivers/rtc/rtc-mt6397.c
> @@ -9,60 +9,7 @@
>  #include <linux/module.h>
>  #include <linux/regmap.h>
>  #include <linux/rtc.h>
> -#include <linux/irqdomain.h>
> -#include <linux/platform_device.h>
> -#include <linux/of_address.h>
> -#include <linux/of_irq.h>
> -#include <linux/io.h>
> -#include <linux/mfd/mt6397/core.h>
> -
> -#define RTC_BBPU		0x0000
> -#define RTC_BBPU_CBUSY		BIT(6)
> -
> -#define RTC_WRTGR		0x003c
> -
> -#define RTC_IRQ_STA		0x0002
> -#define RTC_IRQ_STA_AL		BIT(0)
> -#define RTC_IRQ_STA_LP		BIT(3)
> -
> -#define RTC_IRQ_EN		0x0004
> -#define RTC_IRQ_EN_AL		BIT(0)
> -#define RTC_IRQ_EN_ONESHOT	BIT(2)
> -#define RTC_IRQ_EN_LP		BIT(3)
> -#define RTC_IRQ_EN_ONESHOT_AL	(RTC_IRQ_EN_ONESHOT | RTC_IRQ_EN_AL)
> -
> -#define RTC_AL_MASK		0x0008
> -#define RTC_AL_MASK_DOW		BIT(4)
> -
> -#define RTC_TC_SEC		0x000a
> -/* Min, Hour, Dom... register offset to RTC_TC_SEC */
> -#define RTC_OFFSET_SEC		0
> -#define RTC_OFFSET_MIN		1
> -#define RTC_OFFSET_HOUR		2
> -#define RTC_OFFSET_DOM		3
> -#define RTC_OFFSET_DOW		4
> -#define RTC_OFFSET_MTH		5
> -#define RTC_OFFSET_YEAR		6
> -#define RTC_OFFSET_COUNT	7
> -
> -#define RTC_AL_SEC		0x0018
> -
> -#define RTC_PDN2		0x002e
> -#define RTC_PDN2_PWRON_ALARM	BIT(4)
> -
> -#define RTC_MIN_YEAR		1968
> -#define RTC_BASE_YEAR		1900
> -#define RTC_NUM_YEARS		128
> -#define RTC_MIN_YEAR_OFFSET	(RTC_MIN_YEAR - RTC_BASE_YEAR)
> -
> -struct mt6397_rtc {
> -	struct device		*dev;
> -	struct rtc_device	*rtc_dev;
> -	struct mutex		lock;
> -	struct regmap		*regmap;
> -	int			irq;
> -	u32			addr_base;
> -};
> +#include <linux/mfd/mt6397/rtc.h>
>  
>  static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
>  {
> diff --git a/include/linux/mfd/mt6397/rtc.h b/include/linux/mfd/mt6397/rtc.h
> new file mode 100644
> index 000000000000..b702c29e8c74
> --- /dev/null
> +++ b/include/linux/mfd/mt6397/rtc.h
> @@ -0,0 +1,71 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (C) 2014-2018 MediaTek Inc.
> + *
> + * Author: Tianping.Fang <tianping.fang@mediatek.com>
> + *        Sean Wang <sean.wang@mediatek.com>
> + */
> +
> +#ifndef _LINUX_MFD_MT6397_RTC_H_
> +#define _LINUX_MFD_MT6397_RTC_H_
> +
> +#include <linux/jiffies.h>
> +#include <linux/mutex.h>
> +#include <linux/regmap.h>
> +#include <linux/rtc.h>
> +
> +#define RTC_BBPU               0x0000
> +#define RTC_BBPU_CBUSY         BIT(6)
> +#define RTC_BBPU_KEY            (0x43 << 8)
> +
> +#define RTC_WRTGR              0x003c
> +
> +#define RTC_IRQ_STA            0x0002
> +#define RTC_IRQ_STA_AL         BIT(0)
> +#define RTC_IRQ_STA_LP         BIT(3)
> +
> +#define RTC_IRQ_EN             0x0004
> +#define RTC_IRQ_EN_AL          BIT(0)
> +#define RTC_IRQ_EN_ONESHOT     BIT(2)
> +#define RTC_IRQ_EN_LP          BIT(3)
> +#define RTC_IRQ_EN_ONESHOT_AL  (RTC_IRQ_EN_ONESHOT | RTC_IRQ_EN_AL)
> +
> +#define RTC_AL_MASK            0x0008
> +#define RTC_AL_MASK_DOW                BIT(4)
> +
> +#define RTC_TC_SEC             0x000a
> +/* Min, Hour, Dom... register offset to RTC_TC_SEC */
> +#define RTC_OFFSET_SEC         0
> +#define RTC_OFFSET_MIN         1
> +#define RTC_OFFSET_HOUR                2
> +#define RTC_OFFSET_DOM         3
> +#define RTC_OFFSET_DOW         4
> +#define RTC_OFFSET_MTH         5
> +#define RTC_OFFSET_YEAR                6
> +#define RTC_OFFSET_COUNT       7
> +
> +#define RTC_AL_SEC             0x0018
> +
> +#define RTC_PDN2               0x002e
> +#define RTC_PDN2_PWRON_ALARM   BIT(4)
> +
> +#define RTC_MIN_YEAR           1968
> +#define RTC_BASE_YEAR          1900
> +#define RTC_NUM_YEARS          128
> +#define RTC_MIN_YEAR_OFFSET    (RTC_MIN_YEAR - RTC_BASE_YEAR)
> +
> +#define MTK_RTC_POLL_DELAY_US  10
> +#define MTK_RTC_POLL_TIMEOUT   (jiffies_to_usecs(HZ))
> +
> +struct mt6397_rtc {
> +	struct device           *dev;
> +	struct rtc_device       *rtc_dev;
> +
> +	/* Protect register access from multiple tasks */
> +	struct mutex            lock;
> +	struct regmap           *regmap;
> +	int                     irq;
> +	u32                     addr_base;
> +};
> +
> +#endif /* _LINUX_MFD_MT6397_RTC_H_ */
> -- 
> 2.17.1
> 

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Re: [PATCH v6 05/13] rtc: mt6397: move some common definitions into rtc.h

[Alexandre Belloni]

On 18/08/2019 15:56:03+0200, Frank Wunderlich wrote:
> From: Josef Friedl <josef.friedl@speed.at>
> 
> move code to separate header-file to reuse definitions later
> in poweroff-driver (drivers/power/reset/mt6323-poweroff.c)
> 
> Suggested-by: Frank Wunderlich <frank-w@public-files.de>
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

> ---
> changes since v5: none
> changes since v4: none
> changes since v3: none
> changes since v2: add missing commit-message
> ---
>  drivers/rtc/rtc-mt6397.c       | 55 +-------------------------
>  include/linux/mfd/mt6397/rtc.h | 71 ++++++++++++++++++++++++++++++++++
>  2 files changed, 72 insertions(+), 54 deletions(-)
>  create mode 100644 include/linux/mfd/mt6397/rtc.h
> 
> diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
> index b46ed4dc7015..c08ee5edf865 100644
> --- a/drivers/rtc/rtc-mt6397.c
> +++ b/drivers/rtc/rtc-mt6397.c
> @@ -9,60 +9,7 @@
>  #include <linux/module.h>
>  #include <linux/regmap.h>
>  #include <linux/rtc.h>
> -#include <linux/irqdomain.h>
> -#include <linux/platform_device.h>
> -#include <linux/of_address.h>
> -#include <linux/of_irq.h>
> -#include <linux/io.h>
> -#include <linux/mfd/mt6397/core.h>
> -
> -#define RTC_BBPU		0x0000
> -#define RTC_BBPU_CBUSY		BIT(6)
> -
> -#define RTC_WRTGR		0x003c
> -
> -#define RTC_IRQ_STA		0x0002
> -#define RTC_IRQ_STA_AL		BIT(0)
> -#define RTC_IRQ_STA_LP		BIT(3)
> -
> -#define RTC_IRQ_EN		0x0004
> -#define RTC_IRQ_EN_AL		BIT(0)
> -#define RTC_IRQ_EN_ONESHOT	BIT(2)
> -#define RTC_IRQ_EN_LP		BIT(3)
> -#define RTC_IRQ_EN_ONESHOT_AL	(RTC_IRQ_EN_ONESHOT | RTC_IRQ_EN_AL)
> -
> -#define RTC_AL_MASK		0x0008
> -#define RTC_AL_MASK_DOW		BIT(4)
> -
> -#define RTC_TC_SEC		0x000a
> -/* Min, Hour, Dom... register offset to RTC_TC_SEC */
> -#define RTC_OFFSET_SEC		0
> -#define RTC_OFFSET_MIN		1
> -#define RTC_OFFSET_HOUR		2
> -#define RTC_OFFSET_DOM		3
> -#define RTC_OFFSET_DOW		4
> -#define RTC_OFFSET_MTH		5
> -#define RTC_OFFSET_YEAR		6
> -#define RTC_OFFSET_COUNT	7
> -
> -#define RTC_AL_SEC		0x0018
> -
> -#define RTC_PDN2		0x002e
> -#define RTC_PDN2_PWRON_ALARM	BIT(4)
> -
> -#define RTC_MIN_YEAR		1968
> -#define RTC_BASE_YEAR		1900
> -#define RTC_NUM_YEARS		128
> -#define RTC_MIN_YEAR_OFFSET	(RTC_MIN_YEAR - RTC_BASE_YEAR)
> -
> -struct mt6397_rtc {
> -	struct device		*dev;
> -	struct rtc_device	*rtc_dev;
> -	struct mutex		lock;
> -	struct regmap		*regmap;
> -	int			irq;
> -	u32			addr_base;
> -};
> +#include <linux/mfd/mt6397/rtc.h>
>  
>  static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
>  {
> diff --git a/include/linux/mfd/mt6397/rtc.h b/include/linux/mfd/mt6397/rtc.h
> new file mode 100644
> index 000000000000..b702c29e8c74
> --- /dev/null
> +++ b/include/linux/mfd/mt6397/rtc.h
> @@ -0,0 +1,71 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (C) 2014-2018 MediaTek Inc.
> + *
> + * Author: Tianping.Fang <tianping.fang@mediatek.com>
> + *        Sean Wang <sean.wang@mediatek.com>
> + */
> +
> +#ifndef _LINUX_MFD_MT6397_RTC_H_
> +#define _LINUX_MFD_MT6397_RTC_H_
> +
> +#include <linux/jiffies.h>
> +#include <linux/mutex.h>
> +#include <linux/regmap.h>
> +#include <linux/rtc.h>
> +
> +#define RTC_BBPU               0x0000
> +#define RTC_BBPU_CBUSY         BIT(6)
> +#define RTC_BBPU_KEY            (0x43 << 8)
> +
> +#define RTC_WRTGR              0x003c
> +
> +#define RTC_IRQ_STA            0x0002
> +#define RTC_IRQ_STA_AL         BIT(0)
> +#define RTC_IRQ_STA_LP         BIT(3)
> +
> +#define RTC_IRQ_EN             0x0004
> +#define RTC_IRQ_EN_AL          BIT(0)
> +#define RTC_IRQ_EN_ONESHOT     BIT(2)
> +#define RTC_IRQ_EN_LP          BIT(3)
> +#define RTC_IRQ_EN_ONESHOT_AL  (RTC_IRQ_EN_ONESHOT | RTC_IRQ_EN_AL)
> +
> +#define RTC_AL_MASK            0x0008
> +#define RTC_AL_MASK_DOW                BIT(4)
> +
> +#define RTC_TC_SEC             0x000a
> +/* Min, Hour, Dom... register offset to RTC_TC_SEC */
> +#define RTC_OFFSET_SEC         0
> +#define RTC_OFFSET_MIN         1
> +#define RTC_OFFSET_HOUR                2
> +#define RTC_OFFSET_DOM         3
> +#define RTC_OFFSET_DOW         4
> +#define RTC_OFFSET_MTH         5
> +#define RTC_OFFSET_YEAR                6
> +#define RTC_OFFSET_COUNT       7
> +
> +#define RTC_AL_SEC             0x0018
> +
> +#define RTC_PDN2               0x002e
> +#define RTC_PDN2_PWRON_ALARM   BIT(4)
> +
> +#define RTC_MIN_YEAR           1968
> +#define RTC_BASE_YEAR          1900
> +#define RTC_NUM_YEARS          128
> +#define RTC_MIN_YEAR_OFFSET    (RTC_MIN_YEAR - RTC_BASE_YEAR)
> +
> +#define MTK_RTC_POLL_DELAY_US  10
> +#define MTK_RTC_POLL_TIMEOUT   (jiffies_to_usecs(HZ))
> +
> +struct mt6397_rtc {
> +	struct device           *dev;
> +	struct rtc_device       *rtc_dev;
> +
> +	/* Protect register access from multiple tasks */
> +	struct mutex            lock;
> +	struct regmap           *regmap;
> +	int                     irq;
> +	u32                     addr_base;
> +};
> +
> +#endif /* _LINUX_MFD_MT6397_RTC_H_ */
> -- 
> 2.17.1
> 

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Re: [PATCH v6 05/13] rtc: mt6397: move some common definitions into rtc.h

[Alexandre Belloni]

On 18/08/2019 15:56:03+0200, Frank Wunderlich wrote:
> From: Josef Friedl <josef.friedl@speed.at>
> 
> move code to separate header-file to reuse definitions later
> in poweroff-driver (drivers/power/reset/mt6323-poweroff.c)
> 
> Suggested-by: Frank Wunderlich <frank-w@public-files.de>
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

> ---
> changes since v5: none
> changes since v4: none
> changes since v3: none
> changes since v2: add missing commit-message
> ---
>  drivers/rtc/rtc-mt6397.c       | 55 +-------------------------
>  include/linux/mfd/mt6397/rtc.h | 71 ++++++++++++++++++++++++++++++++++
>  2 files changed, 72 insertions(+), 54 deletions(-)
>  create mode 100644 include/linux/mfd/mt6397/rtc.h
> 
> diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
> index b46ed4dc7015..c08ee5edf865 100644
> --- a/drivers/rtc/rtc-mt6397.c
> +++ b/drivers/rtc/rtc-mt6397.c
> @@ -9,60 +9,7 @@
>  #include <linux/module.h>
>  #include <linux/regmap.h>
>  #include <linux/rtc.h>
> -#include <linux/irqdomain.h>
> -#include <linux/platform_device.h>
> -#include <linux/of_address.h>
> -#include <linux/of_irq.h>
> -#include <linux/io.h>
> -#include <linux/mfd/mt6397/core.h>
> -
> -#define RTC_BBPU		0x0000
> -#define RTC_BBPU_CBUSY		BIT(6)
> -
> -#define RTC_WRTGR		0x003c
> -
> -#define RTC_IRQ_STA		0x0002
> -#define RTC_IRQ_STA_AL		BIT(0)
> -#define RTC_IRQ_STA_LP		BIT(3)
> -
> -#define RTC_IRQ_EN		0x0004
> -#define RTC_IRQ_EN_AL		BIT(0)
> -#define RTC_IRQ_EN_ONESHOT	BIT(2)
> -#define RTC_IRQ_EN_LP		BIT(3)
> -#define RTC_IRQ_EN_ONESHOT_AL	(RTC_IRQ_EN_ONESHOT | RTC_IRQ_EN_AL)
> -
> -#define RTC_AL_MASK		0x0008
> -#define RTC_AL_MASK_DOW		BIT(4)
> -
> -#define RTC_TC_SEC		0x000a
> -/* Min, Hour, Dom... register offset to RTC_TC_SEC */
> -#define RTC_OFFSET_SEC		0
> -#define RTC_OFFSET_MIN		1
> -#define RTC_OFFSET_HOUR		2
> -#define RTC_OFFSET_DOM		3
> -#define RTC_OFFSET_DOW		4
> -#define RTC_OFFSET_MTH		5
> -#define RTC_OFFSET_YEAR		6
> -#define RTC_OFFSET_COUNT	7
> -
> -#define RTC_AL_SEC		0x0018
> -
> -#define RTC_PDN2		0x002e
> -#define RTC_PDN2_PWRON_ALARM	BIT(4)
> -
> -#define RTC_MIN_YEAR		1968
> -#define RTC_BASE_YEAR		1900
> -#define RTC_NUM_YEARS		128
> -#define RTC_MIN_YEAR_OFFSET	(RTC_MIN_YEAR - RTC_BASE_YEAR)
> -
> -struct mt6397_rtc {
> -	struct device		*dev;
> -	struct rtc_device	*rtc_dev;
> -	struct mutex		lock;
> -	struct regmap		*regmap;
> -	int			irq;
> -	u32			addr_base;
> -};
> +#include <linux/mfd/mt6397/rtc.h>
>  
>  static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
>  {
> diff --git a/include/linux/mfd/mt6397/rtc.h b/include/linux/mfd/mt6397/rtc.h
> new file mode 100644
> index 000000000000..b702c29e8c74
> --- /dev/null
> +++ b/include/linux/mfd/mt6397/rtc.h
> @@ -0,0 +1,71 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (C) 2014-2018 MediaTek Inc.
> + *
> + * Author: Tianping.Fang <tianping.fang@mediatek.com>
> + *        Sean Wang <sean.wang@mediatek.com>
> + */
> +
> +#ifndef _LINUX_MFD_MT6397_RTC_H_
> +#define _LINUX_MFD_MT6397_RTC_H_
> +
> +#include <linux/jiffies.h>
> +#include <linux/mutex.h>
> +#include <linux/regmap.h>
> +#include <linux/rtc.h>
> +
> +#define RTC_BBPU               0x0000
> +#define RTC_BBPU_CBUSY         BIT(6)
> +#define RTC_BBPU_KEY            (0x43 << 8)
> +
> +#define RTC_WRTGR              0x003c
> +
> +#define RTC_IRQ_STA            0x0002
> +#define RTC_IRQ_STA_AL         BIT(0)
> +#define RTC_IRQ_STA_LP         BIT(3)
> +
> +#define RTC_IRQ_EN             0x0004
> +#define RTC_IRQ_EN_AL          BIT(0)
> +#define RTC_IRQ_EN_ONESHOT     BIT(2)
> +#define RTC_IRQ_EN_LP          BIT(3)
> +#define RTC_IRQ_EN_ONESHOT_AL  (RTC_IRQ_EN_ONESHOT | RTC_IRQ_EN_AL)
> +
> +#define RTC_AL_MASK            0x0008
> +#define RTC_AL_MASK_DOW                BIT(4)
> +
> +#define RTC_TC_SEC             0x000a
> +/* Min, Hour, Dom... register offset to RTC_TC_SEC */
> +#define RTC_OFFSET_SEC         0
> +#define RTC_OFFSET_MIN         1
> +#define RTC_OFFSET_HOUR                2
> +#define RTC_OFFSET_DOM         3
> +#define RTC_OFFSET_DOW         4
> +#define RTC_OFFSET_MTH         5
> +#define RTC_OFFSET_YEAR                6
> +#define RTC_OFFSET_COUNT       7
> +
> +#define RTC_AL_SEC             0x0018
> +
> +#define RTC_PDN2               0x002e
> +#define RTC_PDN2_PWRON_ALARM   BIT(4)
> +
> +#define RTC_MIN_YEAR           1968
> +#define RTC_BASE_YEAR          1900
> +#define RTC_NUM_YEARS          128
> +#define RTC_MIN_YEAR_OFFSET    (RTC_MIN_YEAR - RTC_BASE_YEAR)
> +
> +#define MTK_RTC_POLL_DELAY_US  10
> +#define MTK_RTC_POLL_TIMEOUT   (jiffies_to_usecs(HZ))
> +
> +struct mt6397_rtc {
> +	struct device           *dev;
> +	struct rtc_device       *rtc_dev;
> +
> +	/* Protect register access from multiple tasks */
> +	struct mutex            lock;
> +	struct regmap           *regmap;
> +	int                     irq;
> +	u32                     addr_base;
> +};
> +
> +#endif /* _LINUX_MFD_MT6397_RTC_H_ */
> -- 
> 2.17.1
> 

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v6 09/13] rtc: mt6397: add compatible for mt6323

[Alexandre Belloni]

On 18/08/2019 15:56:07+0200, Frank Wunderlich wrote:
> From: Josef Friedl <josef.friedl@speed.at>
> 
> use mt6397 rtc driver also for mt6323 but with different
> base/size see "mfd: mt6323: add mt6323 rtc+pwrc"
> 
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

> ---
> changes since v5: none
> changes since v4: none
> changes since v3: moved (was part 5)
> changes since v2: splitted this from v2.3 suggested-by Alexandre Belloni
> ---
>  drivers/rtc/rtc-mt6397.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
> index 9370b7fc9f81..21cd9cc8b4c7 100644
> --- a/drivers/rtc/rtc-mt6397.c
> +++ b/drivers/rtc/rtc-mt6397.c
> @@ -325,6 +325,7 @@ static SIMPLE_DEV_PM_OPS(mt6397_pm_ops, mt6397_rtc_suspend,
>  			mt6397_rtc_resume);
>  
>  static const struct of_device_id mt6397_rtc_of_match[] = {
> +	{ .compatible = "mediatek,mt6323-rtc", },
>  	{ .compatible = "mediatek,mt6397-rtc", },
>  	{ }
>  };
> -- 
> 2.17.1
> 

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Re: [PATCH v6 09/13] rtc: mt6397: add compatible for mt6323

[Alexandre Belloni]

On 18/08/2019 15:56:07+0200, Frank Wunderlich wrote:
> From: Josef Friedl <josef.friedl@speed.at>
> 
> use mt6397 rtc driver also for mt6323 but with different
> base/size see "mfd: mt6323: add mt6323 rtc+pwrc"
> 
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

> ---
> changes since v5: none
> changes since v4: none
> changes since v3: moved (was part 5)
> changes since v2: splitted this from v2.3 suggested-by Alexandre Belloni
> ---
>  drivers/rtc/rtc-mt6397.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
> index 9370b7fc9f81..21cd9cc8b4c7 100644
> --- a/drivers/rtc/rtc-mt6397.c
> +++ b/drivers/rtc/rtc-mt6397.c
> @@ -325,6 +325,7 @@ static SIMPLE_DEV_PM_OPS(mt6397_pm_ops, mt6397_rtc_suspend,
>  			mt6397_rtc_resume);
>  
>  static const struct of_device_id mt6397_rtc_of_match[] = {
> +	{ .compatible = "mediatek,mt6323-rtc", },
>  	{ .compatible = "mediatek,mt6397-rtc", },
>  	{ }
>  };
> -- 
> 2.17.1
> 

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Re: [PATCH v6 09/13] rtc: mt6397: add compatible for mt6323

[Alexandre Belloni]

On 18/08/2019 15:56:07+0200, Frank Wunderlich wrote:
> From: Josef Friedl <josef.friedl@speed.at>
> 
> use mt6397 rtc driver also for mt6323 but with different
> base/size see "mfd: mt6323: add mt6323 rtc+pwrc"
> 
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

> ---
> changes since v5: none
> changes since v4: none
> changes since v3: moved (was part 5)
> changes since v2: splitted this from v2.3 suggested-by Alexandre Belloni
> ---
>  drivers/rtc/rtc-mt6397.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
> index 9370b7fc9f81..21cd9cc8b4c7 100644
> --- a/drivers/rtc/rtc-mt6397.c
> +++ b/drivers/rtc/rtc-mt6397.c
> @@ -325,6 +325,7 @@ static SIMPLE_DEV_PM_OPS(mt6397_pm_ops, mt6397_rtc_suspend,
>  			mt6397_rtc_resume);
>  
>  static const struct of_device_id mt6397_rtc_of_match[] = {
> +	{ .compatible = "mediatek,mt6323-rtc", },
>  	{ .compatible = "mediatek,mt6397-rtc", },
>  	{ }
>  };
> -- 
> 2.17.1
> 

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v6 07/13] rtc: mt6397: improvements of rtc driver

[Alexandre Belloni]

On 18/08/2019 15:56:05+0200, Frank Wunderlich wrote:
> From: Josef Friedl <josef.friedl@speed.at>
> 
> - use regmap_read_poll_timeout to drop while-loop
> - use devm-api to drop remove-callback
> 
> Suggested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

> ---
> changes since v5: none
> changes since v4: none
> changes since v3: none
> changes since v2:
> - fix allocation after irq-request
> - compatible for mt6323 in separate commit => part 5
> ---
>  drivers/rtc/rtc-mt6397.c | 51 +++++++++++++++-------------------------
>  1 file changed, 19 insertions(+), 32 deletions(-)
> 
> diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
> index c08ee5edf865..9370b7fc9f81 100644
> --- a/drivers/rtc/rtc-mt6397.c
> +++ b/drivers/rtc/rtc-mt6397.c
> @@ -4,16 +4,19 @@
>  * Author: Tianping.Fang <tianping.fang@mediatek.com>
>  */
>  
> -#include <linux/delay.h>
> -#include <linux/init.h>
> +#include <linux/err.h>
> +#include <linux/interrupt.h>
> +#include <linux/mfd/mt6397/core.h>
>  #include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/platform_device.h>
>  #include <linux/regmap.h>
>  #include <linux/rtc.h>
>  #include <linux/mfd/mt6397/rtc.h>
> +#include <linux/mod_devicetable.h>
>  
>  static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
>  {
> -	unsigned long timeout = jiffies + HZ;
>  	int ret;
>  	u32 data;
>  
> @@ -21,19 +24,13 @@ static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
>  	if (ret < 0)
>  		return ret;
>  
> -	while (1) {
> -		ret = regmap_read(rtc->regmap, rtc->addr_base + RTC_BBPU,
> -				  &data);
> -		if (ret < 0)
> -			break;
> -		if (!(data & RTC_BBPU_CBUSY))
> -			break;
> -		if (time_after(jiffies, timeout)) {
> -			ret = -ETIMEDOUT;
> -			break;
> -		}
> -		cpu_relax();
> -	}
> +	ret = regmap_read_poll_timeout(rtc->regmap,
> +					rtc->addr_base + RTC_BBPU, data,
> +					!(data & RTC_BBPU_CBUSY),
> +					MTK_RTC_POLL_DELAY_US,
> +					MTK_RTC_POLL_TIMEOUT);
> +	if (ret < 0)
> +		dev_err(rtc->dev, "failed to write WRTGE: %d\n", ret);
>  
>  	return ret;
>  }
> @@ -266,19 +263,19 @@ static int mtk_rtc_probe(struct platform_device *pdev)
>  		return rtc->irq;
>  
>  	rtc->regmap = mt6397_chip->regmap;
> -	rtc->dev = &pdev->dev;
>  	mutex_init(&rtc->lock);
>  
>  	platform_set_drvdata(pdev, rtc);
>  
> -	rtc->rtc_dev = devm_rtc_allocate_device(rtc->dev);
> +	rtc->rtc_dev = devm_rtc_allocate_device(&pdev->dev);
>  	if (IS_ERR(rtc->rtc_dev))
>  		return PTR_ERR(rtc->rtc_dev);
>  
> -	ret = request_threaded_irq(rtc->irq, NULL,
> -				   mtk_rtc_irq_handler_thread,
> -				   IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
> -				   "mt6397-rtc", rtc);
> +	ret = devm_request_threaded_irq(&pdev->dev, rtc->irq, NULL,
> +					mtk_rtc_irq_handler_thread,
> +					IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
> +					"mt6397-rtc", rtc);
> +
>  	if (ret) {
>  		dev_err(&pdev->dev, "Failed to request alarm IRQ: %d: %d\n",
>  			rtc->irq, ret);
> @@ -302,15 +299,6 @@ static int mtk_rtc_probe(struct platform_device *pdev)
>  	return ret;
>  }
>  
> -static int mtk_rtc_remove(struct platform_device *pdev)
> -{
> -	struct mt6397_rtc *rtc = platform_get_drvdata(pdev);
> -
> -	free_irq(rtc->irq, rtc);
> -
> -	return 0;
> -}
> -
>  #ifdef CONFIG_PM_SLEEP
>  static int mt6397_rtc_suspend(struct device *dev)
>  {
> @@ -349,7 +337,6 @@ static struct platform_driver mtk_rtc_driver = {
>  		.pm = &mt6397_pm_ops,
>  	},
>  	.probe	= mtk_rtc_probe,
> -	.remove = mtk_rtc_remove,
>  };
>  
>  module_platform_driver(mtk_rtc_driver);
> -- 
> 2.17.1
> 

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Re: [PATCH v6 07/13] rtc: mt6397: improvements of rtc driver

[Alexandre Belloni]

On 18/08/2019 15:56:05+0200, Frank Wunderlich wrote:
> From: Josef Friedl <josef.friedl@speed.at>
> 
> - use regmap_read_poll_timeout to drop while-loop
> - use devm-api to drop remove-callback
> 
> Suggested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

> ---
> changes since v5: none
> changes since v4: none
> changes since v3: none
> changes since v2:
> - fix allocation after irq-request
> - compatible for mt6323 in separate commit => part 5
> ---
>  drivers/rtc/rtc-mt6397.c | 51 +++++++++++++++-------------------------
>  1 file changed, 19 insertions(+), 32 deletions(-)
> 
> diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
> index c08ee5edf865..9370b7fc9f81 100644
> --- a/drivers/rtc/rtc-mt6397.c
> +++ b/drivers/rtc/rtc-mt6397.c
> @@ -4,16 +4,19 @@
>  * Author: Tianping.Fang <tianping.fang@mediatek.com>
>  */
>  
> -#include <linux/delay.h>
> -#include <linux/init.h>
> +#include <linux/err.h>
> +#include <linux/interrupt.h>
> +#include <linux/mfd/mt6397/core.h>
>  #include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/platform_device.h>
>  #include <linux/regmap.h>
>  #include <linux/rtc.h>
>  #include <linux/mfd/mt6397/rtc.h>
> +#include <linux/mod_devicetable.h>
>  
>  static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
>  {
> -	unsigned long timeout = jiffies + HZ;
>  	int ret;
>  	u32 data;
>  
> @@ -21,19 +24,13 @@ static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
>  	if (ret < 0)
>  		return ret;
>  
> -	while (1) {
> -		ret = regmap_read(rtc->regmap, rtc->addr_base + RTC_BBPU,
> -				  &data);
> -		if (ret < 0)
> -			break;
> -		if (!(data & RTC_BBPU_CBUSY))
> -			break;
> -		if (time_after(jiffies, timeout)) {
> -			ret = -ETIMEDOUT;
> -			break;
> -		}
> -		cpu_relax();
> -	}
> +	ret = regmap_read_poll_timeout(rtc->regmap,
> +					rtc->addr_base + RTC_BBPU, data,
> +					!(data & RTC_BBPU_CBUSY),
> +					MTK_RTC_POLL_DELAY_US,
> +					MTK_RTC_POLL_TIMEOUT);
> +	if (ret < 0)
> +		dev_err(rtc->dev, "failed to write WRTGE: %d\n", ret);
>  
>  	return ret;
>  }
> @@ -266,19 +263,19 @@ static int mtk_rtc_probe(struct platform_device *pdev)
>  		return rtc->irq;
>  
>  	rtc->regmap = mt6397_chip->regmap;
> -	rtc->dev = &pdev->dev;
>  	mutex_init(&rtc->lock);
>  
>  	platform_set_drvdata(pdev, rtc);
>  
> -	rtc->rtc_dev = devm_rtc_allocate_device(rtc->dev);
> +	rtc->rtc_dev = devm_rtc_allocate_device(&pdev->dev);
>  	if (IS_ERR(rtc->rtc_dev))
>  		return PTR_ERR(rtc->rtc_dev);
>  
> -	ret = request_threaded_irq(rtc->irq, NULL,
> -				   mtk_rtc_irq_handler_thread,
> -				   IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
> -				   "mt6397-rtc", rtc);
> +	ret = devm_request_threaded_irq(&pdev->dev, rtc->irq, NULL,
> +					mtk_rtc_irq_handler_thread,
> +					IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
> +					"mt6397-rtc", rtc);
> +
>  	if (ret) {
>  		dev_err(&pdev->dev, "Failed to request alarm IRQ: %d: %d\n",
>  			rtc->irq, ret);
> @@ -302,15 +299,6 @@ static int mtk_rtc_probe(struct platform_device *pdev)
>  	return ret;
>  }
>  
> -static int mtk_rtc_remove(struct platform_device *pdev)
> -{
> -	struct mt6397_rtc *rtc = platform_get_drvdata(pdev);
> -
> -	free_irq(rtc->irq, rtc);
> -
> -	return 0;
> -}
> -
>  #ifdef CONFIG_PM_SLEEP
>  static int mt6397_rtc_suspend(struct device *dev)
>  {
> @@ -349,7 +337,6 @@ static struct platform_driver mtk_rtc_driver = {
>  		.pm = &mt6397_pm_ops,
>  	},
>  	.probe	= mtk_rtc_probe,
> -	.remove = mtk_rtc_remove,
>  };
>  
>  module_platform_driver(mtk_rtc_driver);
> -- 
> 2.17.1
> 

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Re: [PATCH v6 07/13] rtc: mt6397: improvements of rtc driver

[Alexandre Belloni]

On 18/08/2019 15:56:05+0200, Frank Wunderlich wrote:
> From: Josef Friedl <josef.friedl@speed.at>
> 
> - use regmap_read_poll_timeout to drop while-loop
> - use devm-api to drop remove-callback
> 
> Suggested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

> ---
> changes since v5: none
> changes since v4: none
> changes since v3: none
> changes since v2:
> - fix allocation after irq-request
> - compatible for mt6323 in separate commit => part 5
> ---
>  drivers/rtc/rtc-mt6397.c | 51 +++++++++++++++-------------------------
>  1 file changed, 19 insertions(+), 32 deletions(-)
> 
> diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
> index c08ee5edf865..9370b7fc9f81 100644
> --- a/drivers/rtc/rtc-mt6397.c
> +++ b/drivers/rtc/rtc-mt6397.c
> @@ -4,16 +4,19 @@
>  * Author: Tianping.Fang <tianping.fang@mediatek.com>
>  */
>  
> -#include <linux/delay.h>
> -#include <linux/init.h>
> +#include <linux/err.h>
> +#include <linux/interrupt.h>
> +#include <linux/mfd/mt6397/core.h>
>  #include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/platform_device.h>
>  #include <linux/regmap.h>
>  #include <linux/rtc.h>
>  #include <linux/mfd/mt6397/rtc.h>
> +#include <linux/mod_devicetable.h>
>  
>  static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
>  {
> -	unsigned long timeout = jiffies + HZ;
>  	int ret;
>  	u32 data;
>  
> @@ -21,19 +24,13 @@ static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
>  	if (ret < 0)
>  		return ret;
>  
> -	while (1) {
> -		ret = regmap_read(rtc->regmap, rtc->addr_base + RTC_BBPU,
> -				  &data);
> -		if (ret < 0)
> -			break;
> -		if (!(data & RTC_BBPU_CBUSY))
> -			break;
> -		if (time_after(jiffies, timeout)) {
> -			ret = -ETIMEDOUT;
> -			break;
> -		}
> -		cpu_relax();
> -	}
> +	ret = regmap_read_poll_timeout(rtc->regmap,
> +					rtc->addr_base + RTC_BBPU, data,
> +					!(data & RTC_BBPU_CBUSY),
> +					MTK_RTC_POLL_DELAY_US,
> +					MTK_RTC_POLL_TIMEOUT);
> +	if (ret < 0)
> +		dev_err(rtc->dev, "failed to write WRTGE: %d\n", ret);
>  
>  	return ret;
>  }
> @@ -266,19 +263,19 @@ static int mtk_rtc_probe(struct platform_device *pdev)
>  		return rtc->irq;
>  
>  	rtc->regmap = mt6397_chip->regmap;
> -	rtc->dev = &pdev->dev;
>  	mutex_init(&rtc->lock);
>  
>  	platform_set_drvdata(pdev, rtc);
>  
> -	rtc->rtc_dev = devm_rtc_allocate_device(rtc->dev);
> +	rtc->rtc_dev = devm_rtc_allocate_device(&pdev->dev);
>  	if (IS_ERR(rtc->rtc_dev))
>  		return PTR_ERR(rtc->rtc_dev);
>  
> -	ret = request_threaded_irq(rtc->irq, NULL,
> -				   mtk_rtc_irq_handler_thread,
> -				   IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
> -				   "mt6397-rtc", rtc);
> +	ret = devm_request_threaded_irq(&pdev->dev, rtc->irq, NULL,
> +					mtk_rtc_irq_handler_thread,
> +					IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
> +					"mt6397-rtc", rtc);
> +
>  	if (ret) {
>  		dev_err(&pdev->dev, "Failed to request alarm IRQ: %d: %d\n",
>  			rtc->irq, ret);
> @@ -302,15 +299,6 @@ static int mtk_rtc_probe(struct platform_device *pdev)
>  	return ret;
>  }
>  
> -static int mtk_rtc_remove(struct platform_device *pdev)
> -{
> -	struct mt6397_rtc *rtc = platform_get_drvdata(pdev);
> -
> -	free_irq(rtc->irq, rtc);
> -
> -	return 0;
> -}
> -
>  #ifdef CONFIG_PM_SLEEP
>  static int mt6397_rtc_suspend(struct device *dev)
>  {
> @@ -349,7 +337,6 @@ static struct platform_driver mtk_rtc_driver = {
>  		.pm = &mt6397_pm_ops,
>  	},
>  	.probe	= mtk_rtc_probe,
> -	.remove = mtk_rtc_remove,
>  };
>  
>  module_platform_driver(mtk_rtc_driver);
> -- 
> 2.17.1
> 

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v6 01/13] dt-bindings: mfd: mediatek: mt6397: change to relative paths

[Rob Herring]

On Sun, 18 Aug 2019 15:55:59 +0200, Frank Wunderlich wrote:
> paths in dt-bindings should be relative as suggested by Lee Johnes
> 
> Suggested-By: Lee Jones <lee.jones@linaro.org>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> changes since v5: splitted from dt-bindings: add powercontroller
> ---
>  Documentation/devicetree/bindings/mfd/mt6397.txt | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v6 01/13] dt-bindings: mfd: mediatek: mt6397: change to relative paths

[Rob Herring]

On Sun, 18 Aug 2019 15:55:59 +0200, Frank Wunderlich wrote:
> paths in dt-bindings should be relative as suggested by Lee Johnes
> 
> Suggested-By: Lee Jones <lee.jones@linaro.org>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> changes since v5: splitted from dt-bindings: add powercontroller
> ---
>  Documentation/devicetree/bindings/mfd/mt6397.txt | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v6 01/13] dt-bindings: mfd: mediatek: mt6397: change to relative paths

[Rob Herring]

On Sun, 18 Aug 2019 15:55:59 +0200, Frank Wunderlich wrote:
> paths in dt-bindings should be relative as suggested by Lee Johnes
> 
> Suggested-By: Lee Jones <lee.jones@linaro.org>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> changes since v5: splitted from dt-bindings: add powercontroller
> ---
>  Documentation/devicetree/bindings/mfd/mt6397.txt | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v6 02/13] dt-bindings: mfd: mediatek: update rtc to include mt6323

[Rob Herring]

On Sun, 18 Aug 2019 15:56:00 +0200, Frank Wunderlich wrote:
> From: Josef Friedl <josef.friedl@speed.at>
> 
> add mt6323 to rtc-bindings
> 
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> changes since v5: splitted from "dt-bindings: add powercontroller"
> ---
>  Documentation/devicetree/bindings/mfd/mt6397.txt | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v6 02/13] dt-bindings: mfd: mediatek: update rtc to include mt6323

[Rob Herring]

On Sun, 18 Aug 2019 15:56:00 +0200, Frank Wunderlich wrote:
> From: Josef Friedl <josef.friedl@speed.at>
> 
> add mt6323 to rtc-bindings
> 
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> changes since v5: splitted from "dt-bindings: add powercontroller"
> ---
>  Documentation/devicetree/bindings/mfd/mt6397.txt | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v6 02/13] dt-bindings: mfd: mediatek: update rtc to include mt6323

[Rob Herring]

On Sun, 18 Aug 2019 15:56:00 +0200, Frank Wunderlich wrote:
> From: Josef Friedl <josef.friedl@speed.at>
> 
> add mt6323 to rtc-bindings
> 
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> changes since v5: splitted from "dt-bindings: add powercontroller"
> ---
>  Documentation/devicetree/bindings/mfd/mt6397.txt | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v6 03/13] dt-bindings: mfd: mediatek: add mt6323 power-controller

[Rob Herring]

On Sun, 18 Aug 2019 15:56:01 +0200, Frank Wunderlich wrote:
> From: Josef Friedl <josef.friedl@speed.at>
> 
> - add powercontroller-section to existing binding-document
> - add mt6323-pwrc bindings-document with example
> 
> Suggested-by: Frank Wunderlich <frank-w@public-files.de>
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
> ---
> changes since v5: split out non-pwrc related changes
> changes since v4: none
> changes since v3: none
> changes since v2: none (=v2 part 7)
> ---
>  .../devicetree/bindings/mfd/mt6397.txt        |  6 ++++++
>  .../bindings/power/reset/mt6323-poweroff.txt  | 20 +++++++++++++++++++
>  2 files changed, 26 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v6 03/13] dt-bindings: mfd: mediatek: add mt6323 power-controller

[Rob Herring]

On Sun, 18 Aug 2019 15:56:01 +0200, Frank Wunderlich wrote:
> From: Josef Friedl <josef.friedl@speed.at>
> 
> - add powercontroller-section to existing binding-document
> - add mt6323-pwrc bindings-document with example
> 
> Suggested-by: Frank Wunderlich <frank-w@public-files.de>
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
> ---
> changes since v5: split out non-pwrc related changes
> changes since v4: none
> changes since v3: none
> changes since v2: none (=v2 part 7)
> ---
>  .../devicetree/bindings/mfd/mt6397.txt        |  6 ++++++
>  .../bindings/power/reset/mt6323-poweroff.txt  | 20 +++++++++++++++++++
>  2 files changed, 26 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v6 03/13] dt-bindings: mfd: mediatek: add mt6323 power-controller

[Rob Herring]

On Sun, 18 Aug 2019 15:56:01 +0200, Frank Wunderlich wrote:
> From: Josef Friedl <josef.friedl@speed.at>
> 
> - add powercontroller-section to existing binding-document
> - add mt6323-pwrc bindings-document with example
> 
> Suggested-by: Frank Wunderlich <frank-w@public-files.de>
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
> ---
> changes since v5: split out non-pwrc related changes
> changes since v4: none
> changes since v3: none
> changes since v2: none (=v2 part 7)
> ---
>  .../devicetree/bindings/mfd/mt6397.txt        |  6 ++++++
>  .../bindings/power/reset/mt6323-poweroff.txt  | 20 +++++++++++++++++++
>  2 files changed, 26 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
> 

Reviewed-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v6 04/13] dt-bindings: rtc: mediatek: add missing mt6397 rtc

[Rob Herring]

On Sun, 18 Aug 2019 15:56:02 +0200, Frank Wunderlich wrote:
> From: Josef Friedl <josef.friedl@speed.at>
> 
> add missing devicetree-binding document for mt6397 rtc
> in later patch driver is extended with mt6323 chip
> 
> Suggested-By: Alexandre Belloni <alexandre.belloni@bootlin.com>
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> changes since v5: none
> changes since v4: use relative path
> changes since v3: moved SOB
> changes since v2: splitted rtc-mt6397.txt from first patch
> ---
>  .../devicetree/bindings/rtc/rtc-mt6397.txt    | 29 +++++++++++++++++++
>  1 file changed, 29 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v6 04/13] dt-bindings: rtc: mediatek: add missing mt6397 rtc

[Rob Herring]

On Sun, 18 Aug 2019 15:56:02 +0200, Frank Wunderlich wrote:
> From: Josef Friedl <josef.friedl@speed.at>
> 
> add missing devicetree-binding document for mt6397 rtc
> in later patch driver is extended with mt6323 chip
> 
> Suggested-By: Alexandre Belloni <alexandre.belloni@bootlin.com>
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> changes since v5: none
> changes since v4: use relative path
> changes since v3: moved SOB
> changes since v2: splitted rtc-mt6397.txt from first patch
> ---
>  .../devicetree/bindings/rtc/rtc-mt6397.txt    | 29 +++++++++++++++++++
>  1 file changed, 29 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Re: [PATCH v6 04/13] dt-bindings: rtc: mediatek: add missing mt6397 rtc

[Rob Herring]

On Sun, 18 Aug 2019 15:56:02 +0200, Frank Wunderlich wrote:
> From: Josef Friedl <josef.friedl@speed.at>
> 
> add missing devicetree-binding document for mt6397 rtc
> in later patch driver is extended with mt6323 chip
> 
> Suggested-By: Alexandre Belloni <alexandre.belloni@bootlin.com>
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> changes since v5: none
> changes since v4: use relative path
> changes since v3: moved SOB
> changes since v2: splitted rtc-mt6397.txt from first patch
> ---
>  .../devicetree/bindings/rtc/rtc-mt6397.txt    | 29 +++++++++++++++++++
>  1 file changed, 29 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
> 

Reviewed-by: Rob Herring <robh@kernel.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v6 11/13] power: reset: add driver for mt6323 poweroff

[Sebastian Reichel]

[-- Attachment #1: Type: text/plain, Size: 5568 bytes --]

Hi,

On Sun, Aug 18, 2019 at 03:56:09PM +0200, Frank Wunderlich wrote:
> From: Josef Friedl <josef.friedl@speed.at>
> 
> add poweroff driver for mt6323 and make Makefile and Kconfig-Entries
> 
> Suggested-by: Frank Wunderlich <frank-w@public-files.de>
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> changes since v5: split out mfd/mt6397/core.h
> changes since v4: none
> changes since v3: none
> changes since v2: none (=v2 part 5)
> ---

Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>

-- Sebastian

>  drivers/power/reset/Kconfig           | 10 +++
>  drivers/power/reset/Makefile          |  1 +
>  drivers/power/reset/mt6323-poweroff.c | 97 +++++++++++++++++++++++++++
>  3 files changed, 108 insertions(+)
>  create mode 100644 drivers/power/reset/mt6323-poweroff.c
> 
> diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
> index a564237278ff..c721939767eb 100644
> --- a/drivers/power/reset/Kconfig
> +++ b/drivers/power/reset/Kconfig
> @@ -140,6 +140,16 @@ config POWER_RESET_LTC2952
>  	  This driver supports an external powerdown trigger and board power
>  	  down via the LTC2952. Bindings are made in the device tree.
>  
> +config POWER_RESET_MT6323
> +       bool "MediaTek MT6323 power-off driver"
> +       depends on MFD_MT6397
> +       help
> +         The power-off driver is responsible for externally shutdown down
> +         the power of a remote MediaTek SoC MT6323 is connected to through
> +         controlling a tiny circuit BBPU inside MT6323 RTC.
> +
> +         Say Y if you have a board where MT6323 could be found.
> +
>  config POWER_RESET_QNAP
>  	bool "QNAP power-off driver"
>  	depends on OF_GPIO && PLAT_ORION
> diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
> index 85da3198e4e0..da37f8b851dc 100644
> --- a/drivers/power/reset/Makefile
> +++ b/drivers/power/reset/Makefile
> @@ -11,6 +11,7 @@ obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
>  obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
>  obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
>  obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
> +obj-$(CONFIG_POWER_RESET_MT6323) += mt6323-poweroff.o
>  obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o
>  obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o
>  obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o
> diff --git a/drivers/power/reset/mt6323-poweroff.c b/drivers/power/reset/mt6323-poweroff.c
> new file mode 100644
> index 000000000000..1caf43d9e46d
> --- /dev/null
> +++ b/drivers/power/reset/mt6323-poweroff.c
> @@ -0,0 +1,97 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Power off through MediaTek PMIC
> + *
> + * Copyright (C) 2018 MediaTek Inc.
> + *
> + * Author: Sean Wang <sean.wang@mediatek.com>
> + *
> + */
> +
> +#include <linux/err.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/mfd/mt6397/core.h>
> +#include <linux/mfd/mt6397/rtc.h>
> +
> +struct mt6323_pwrc {
> +	struct device *dev;
> +	struct regmap *regmap;
> +	u32 base;
> +};
> +
> +static struct mt6323_pwrc *mt_pwrc;
> +
> +static void mt6323_do_pwroff(void)
> +{
> +	struct mt6323_pwrc *pwrc = mt_pwrc;
> +	unsigned int val;
> +	int ret;
> +
> +	regmap_write(pwrc->regmap, pwrc->base + RTC_BBPU, RTC_BBPU_KEY);
> +	regmap_write(pwrc->regmap, pwrc->base + RTC_WRTGR, 1);
> +
> +	ret = regmap_read_poll_timeout(pwrc->regmap,
> +					pwrc->base + RTC_BBPU, val,
> +					!(val & RTC_BBPU_CBUSY),
> +					MTK_RTC_POLL_DELAY_US,
> +					MTK_RTC_POLL_TIMEOUT);
> +	if (ret)
> +		dev_err(pwrc->dev, "failed to write BBPU: %d\n", ret);
> +
> +	/* Wait some time until system down, otherwise, notice with a warn */
> +	mdelay(1000);
> +
> +	WARN_ONCE(1, "Unable to power off system\n");
> +}
> +
> +static int mt6323_pwrc_probe(struct platform_device *pdev)
> +{
> +	struct mt6397_chip *mt6397_chip = dev_get_drvdata(pdev->dev.parent);
> +	struct mt6323_pwrc *pwrc;
> +	struct resource *res;
> +
> +	pwrc = devm_kzalloc(&pdev->dev, sizeof(*pwrc), GFP_KERNEL);
> +	if (!pwrc)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	pwrc->base = res->start;
> +	pwrc->regmap = mt6397_chip->regmap;
> +	pwrc->dev = &pdev->dev;
> +	mt_pwrc = pwrc;
> +
> +	pm_power_off = &mt6323_do_pwroff;
> +
> +	return 0;
> +}
> +
> +static int mt6323_pwrc_remove(struct platform_device *pdev)
> +{
> +	if (pm_power_off == &mt6323_do_pwroff)
> +		pm_power_off = NULL;
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id mt6323_pwrc_dt_match[] = {
> +	{ .compatible = "mediatek,mt6323-pwrc" },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, mt6323_pwrc_dt_match);
> +
> +static struct platform_driver mt6323_pwrc_driver = {
> +	.probe          = mt6323_pwrc_probe,
> +	.remove         = mt6323_pwrc_remove,
> +	.driver         = {
> +		.name   = "mt6323-pwrc",
> +		.of_match_table = mt6323_pwrc_dt_match,
> +	},
> +};
> +
> +module_platform_driver(mt6323_pwrc_driver);
> +
> +MODULE_DESCRIPTION("Poweroff driver for MT6323 PMIC");
> +MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
> +MODULE_LICENSE("GPL v2");
> -- 
> 2.17.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v6 11/13] power: reset: add driver for mt6323 poweroff

[Sebastian Reichel]

[-- Attachment #1: Type: text/plain, Size: 5568 bytes --]

Hi,

On Sun, Aug 18, 2019 at 03:56:09PM +0200, Frank Wunderlich wrote:
> From: Josef Friedl <josef.friedl@speed.at>
> 
> add poweroff driver for mt6323 and make Makefile and Kconfig-Entries
> 
> Suggested-by: Frank Wunderlich <frank-w@public-files.de>
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> changes since v5: split out mfd/mt6397/core.h
> changes since v4: none
> changes since v3: none
> changes since v2: none (=v2 part 5)
> ---

Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>

-- Sebastian

>  drivers/power/reset/Kconfig           | 10 +++
>  drivers/power/reset/Makefile          |  1 +
>  drivers/power/reset/mt6323-poweroff.c | 97 +++++++++++++++++++++++++++
>  3 files changed, 108 insertions(+)
>  create mode 100644 drivers/power/reset/mt6323-poweroff.c
> 
> diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
> index a564237278ff..c721939767eb 100644
> --- a/drivers/power/reset/Kconfig
> +++ b/drivers/power/reset/Kconfig
> @@ -140,6 +140,16 @@ config POWER_RESET_LTC2952
>  	  This driver supports an external powerdown trigger and board power
>  	  down via the LTC2952. Bindings are made in the device tree.
>  
> +config POWER_RESET_MT6323
> +       bool "MediaTek MT6323 power-off driver"
> +       depends on MFD_MT6397
> +       help
> +         The power-off driver is responsible for externally shutdown down
> +         the power of a remote MediaTek SoC MT6323 is connected to through
> +         controlling a tiny circuit BBPU inside MT6323 RTC.
> +
> +         Say Y if you have a board where MT6323 could be found.
> +
>  config POWER_RESET_QNAP
>  	bool "QNAP power-off driver"
>  	depends on OF_GPIO && PLAT_ORION
> diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
> index 85da3198e4e0..da37f8b851dc 100644
> --- a/drivers/power/reset/Makefile
> +++ b/drivers/power/reset/Makefile
> @@ -11,6 +11,7 @@ obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
>  obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
>  obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
>  obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
> +obj-$(CONFIG_POWER_RESET_MT6323) += mt6323-poweroff.o
>  obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o
>  obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o
>  obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o
> diff --git a/drivers/power/reset/mt6323-poweroff.c b/drivers/power/reset/mt6323-poweroff.c
> new file mode 100644
> index 000000000000..1caf43d9e46d
> --- /dev/null
> +++ b/drivers/power/reset/mt6323-poweroff.c
> @@ -0,0 +1,97 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Power off through MediaTek PMIC
> + *
> + * Copyright (C) 2018 MediaTek Inc.
> + *
> + * Author: Sean Wang <sean.wang@mediatek.com>
> + *
> + */
> +
> +#include <linux/err.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/mfd/mt6397/core.h>
> +#include <linux/mfd/mt6397/rtc.h>
> +
> +struct mt6323_pwrc {
> +	struct device *dev;
> +	struct regmap *regmap;
> +	u32 base;
> +};
> +
> +static struct mt6323_pwrc *mt_pwrc;
> +
> +static void mt6323_do_pwroff(void)
> +{
> +	struct mt6323_pwrc *pwrc = mt_pwrc;
> +	unsigned int val;
> +	int ret;
> +
> +	regmap_write(pwrc->regmap, pwrc->base + RTC_BBPU, RTC_BBPU_KEY);
> +	regmap_write(pwrc->regmap, pwrc->base + RTC_WRTGR, 1);
> +
> +	ret = regmap_read_poll_timeout(pwrc->regmap,
> +					pwrc->base + RTC_BBPU, val,
> +					!(val & RTC_BBPU_CBUSY),
> +					MTK_RTC_POLL_DELAY_US,
> +					MTK_RTC_POLL_TIMEOUT);
> +	if (ret)
> +		dev_err(pwrc->dev, "failed to write BBPU: %d\n", ret);
> +
> +	/* Wait some time until system down, otherwise, notice with a warn */
> +	mdelay(1000);
> +
> +	WARN_ONCE(1, "Unable to power off system\n");
> +}
> +
> +static int mt6323_pwrc_probe(struct platform_device *pdev)
> +{
> +	struct mt6397_chip *mt6397_chip = dev_get_drvdata(pdev->dev.parent);
> +	struct mt6323_pwrc *pwrc;
> +	struct resource *res;
> +
> +	pwrc = devm_kzalloc(&pdev->dev, sizeof(*pwrc), GFP_KERNEL);
> +	if (!pwrc)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	pwrc->base = res->start;
> +	pwrc->regmap = mt6397_chip->regmap;
> +	pwrc->dev = &pdev->dev;
> +	mt_pwrc = pwrc;
> +
> +	pm_power_off = &mt6323_do_pwroff;
> +
> +	return 0;
> +}
> +
> +static int mt6323_pwrc_remove(struct platform_device *pdev)
> +{
> +	if (pm_power_off == &mt6323_do_pwroff)
> +		pm_power_off = NULL;
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id mt6323_pwrc_dt_match[] = {
> +	{ .compatible = "mediatek,mt6323-pwrc" },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, mt6323_pwrc_dt_match);
> +
> +static struct platform_driver mt6323_pwrc_driver = {
> +	.probe          = mt6323_pwrc_probe,
> +	.remove         = mt6323_pwrc_remove,
> +	.driver         = {
> +		.name   = "mt6323-pwrc",
> +		.of_match_table = mt6323_pwrc_dt_match,
> +	},
> +};
> +
> +module_platform_driver(mt6323_pwrc_driver);
> +
> +MODULE_DESCRIPTION("Poweroff driver for MT6323 PMIC");
> +MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
> +MODULE_LICENSE("GPL v2");
> -- 
> 2.17.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v6 11/13] power: reset: add driver for mt6323 poweroff

[Sebastian Reichel]

[-- Attachment #1.1: Type: text/plain, Size: 5568 bytes --]

Hi,

On Sun, Aug 18, 2019 at 03:56:09PM +0200, Frank Wunderlich wrote:
> From: Josef Friedl <josef.friedl@speed.at>
> 
> add poweroff driver for mt6323 and make Makefile and Kconfig-Entries
> 
> Suggested-by: Frank Wunderlich <frank-w@public-files.de>
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> changes since v5: split out mfd/mt6397/core.h
> changes since v4: none
> changes since v3: none
> changes since v2: none (=v2 part 5)
> ---

Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>

-- Sebastian

>  drivers/power/reset/Kconfig           | 10 +++
>  drivers/power/reset/Makefile          |  1 +
>  drivers/power/reset/mt6323-poweroff.c | 97 +++++++++++++++++++++++++++
>  3 files changed, 108 insertions(+)
>  create mode 100644 drivers/power/reset/mt6323-poweroff.c
> 
> diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
> index a564237278ff..c721939767eb 100644
> --- a/drivers/power/reset/Kconfig
> +++ b/drivers/power/reset/Kconfig
> @@ -140,6 +140,16 @@ config POWER_RESET_LTC2952
>  	  This driver supports an external powerdown trigger and board power
>  	  down via the LTC2952. Bindings are made in the device tree.
>  
> +config POWER_RESET_MT6323
> +       bool "MediaTek MT6323 power-off driver"
> +       depends on MFD_MT6397
> +       help
> +         The power-off driver is responsible for externally shutdown down
> +         the power of a remote MediaTek SoC MT6323 is connected to through
> +         controlling a tiny circuit BBPU inside MT6323 RTC.
> +
> +         Say Y if you have a board where MT6323 could be found.
> +
>  config POWER_RESET_QNAP
>  	bool "QNAP power-off driver"
>  	depends on OF_GPIO && PLAT_ORION
> diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
> index 85da3198e4e0..da37f8b851dc 100644
> --- a/drivers/power/reset/Makefile
> +++ b/drivers/power/reset/Makefile
> @@ -11,6 +11,7 @@ obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
>  obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
>  obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
>  obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
> +obj-$(CONFIG_POWER_RESET_MT6323) += mt6323-poweroff.o
>  obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o
>  obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o
>  obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o
> diff --git a/drivers/power/reset/mt6323-poweroff.c b/drivers/power/reset/mt6323-poweroff.c
> new file mode 100644
> index 000000000000..1caf43d9e46d
> --- /dev/null
> +++ b/drivers/power/reset/mt6323-poweroff.c
> @@ -0,0 +1,97 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Power off through MediaTek PMIC
> + *
> + * Copyright (C) 2018 MediaTek Inc.
> + *
> + * Author: Sean Wang <sean.wang@mediatek.com>
> + *
> + */
> +
> +#include <linux/err.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/mfd/mt6397/core.h>
> +#include <linux/mfd/mt6397/rtc.h>
> +
> +struct mt6323_pwrc {
> +	struct device *dev;
> +	struct regmap *regmap;
> +	u32 base;
> +};
> +
> +static struct mt6323_pwrc *mt_pwrc;
> +
> +static void mt6323_do_pwroff(void)
> +{
> +	struct mt6323_pwrc *pwrc = mt_pwrc;
> +	unsigned int val;
> +	int ret;
> +
> +	regmap_write(pwrc->regmap, pwrc->base + RTC_BBPU, RTC_BBPU_KEY);
> +	regmap_write(pwrc->regmap, pwrc->base + RTC_WRTGR, 1);
> +
> +	ret = regmap_read_poll_timeout(pwrc->regmap,
> +					pwrc->base + RTC_BBPU, val,
> +					!(val & RTC_BBPU_CBUSY),
> +					MTK_RTC_POLL_DELAY_US,
> +					MTK_RTC_POLL_TIMEOUT);
> +	if (ret)
> +		dev_err(pwrc->dev, "failed to write BBPU: %d\n", ret);
> +
> +	/* Wait some time until system down, otherwise, notice with a warn */
> +	mdelay(1000);
> +
> +	WARN_ONCE(1, "Unable to power off system\n");
> +}
> +
> +static int mt6323_pwrc_probe(struct platform_device *pdev)
> +{
> +	struct mt6397_chip *mt6397_chip = dev_get_drvdata(pdev->dev.parent);
> +	struct mt6323_pwrc *pwrc;
> +	struct resource *res;
> +
> +	pwrc = devm_kzalloc(&pdev->dev, sizeof(*pwrc), GFP_KERNEL);
> +	if (!pwrc)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	pwrc->base = res->start;
> +	pwrc->regmap = mt6397_chip->regmap;
> +	pwrc->dev = &pdev->dev;
> +	mt_pwrc = pwrc;
> +
> +	pm_power_off = &mt6323_do_pwroff;
> +
> +	return 0;
> +}
> +
> +static int mt6323_pwrc_remove(struct platform_device *pdev)
> +{
> +	if (pm_power_off == &mt6323_do_pwroff)
> +		pm_power_off = NULL;
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id mt6323_pwrc_dt_match[] = {
> +	{ .compatible = "mediatek,mt6323-pwrc" },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, mt6323_pwrc_dt_match);
> +
> +static struct platform_driver mt6323_pwrc_driver = {
> +	.probe          = mt6323_pwrc_probe,
> +	.remove         = mt6323_pwrc_remove,
> +	.driver         = {
> +		.name   = "mt6323-pwrc",
> +		.of_match_table = mt6323_pwrc_dt_match,
> +	},
> +};
> +
> +module_platform_driver(mt6323_pwrc_driver);
> +
> +MODULE_DESCRIPTION("Poweroff driver for MT6323 PMIC");
> +MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
> +MODULE_LICENSE("GPL v2");
> -- 
> 2.17.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v6 12/13] MAINTAINERS: add Mediatek shutdown drivers

[Sebastian Reichel]

[-- Attachment #1: Type: text/plain, Size: 1394 bytes --]

Hi,

On Sun, Aug 18, 2019 at 03:56:10PM +0200, Frank Wunderlich wrote:
> From: Josef Friedl <josef.friedl@speed.at>
> 
> add Section in MAINTAINERS file for poweroff driver
> 
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> changes since v5: none
> changes since v4: none
> changes since v3: moved SOB
> changes since v2: none (=v2 part 6)
> ---

Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>

-- Sebastian

>  MAINTAINERS | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 6426db5198f0..4172a3177633 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -10128,6 +10128,13 @@ S:	Maintained
>  F:	drivers/net/dsa/mt7530.*
>  F:	net/dsa/tag_mtk.c
>  
> +MEDIATEK BOARD LEVEL SHUTDOWN DRIVERS
> +M:	Sean Wang <sean.wang@mediatek.com>
> +L:	linux-pm@vger.kernel.org
> +S:	Maintained
> +F:	Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
> +F:	drivers/power/reset/mt6323-poweroff.c
> +
>  MEDIATEK JPEG DRIVER
>  M:	Rick Chang <rick.chang@mediatek.com>
>  M:	Bin Liu <bin.liu@mediatek.com>
> -- 
> 2.17.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v6 12/13] MAINTAINERS: add Mediatek shutdown drivers

[Sebastian Reichel]

[-- Attachment #1: Type: text/plain, Size: 1394 bytes --]

Hi,

On Sun, Aug 18, 2019 at 03:56:10PM +0200, Frank Wunderlich wrote:
> From: Josef Friedl <josef.friedl@speed.at>
> 
> add Section in MAINTAINERS file for poweroff driver
> 
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> changes since v5: none
> changes since v4: none
> changes since v3: moved SOB
> changes since v2: none (=v2 part 6)
> ---

Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>

-- Sebastian

>  MAINTAINERS | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 6426db5198f0..4172a3177633 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -10128,6 +10128,13 @@ S:	Maintained
>  F:	drivers/net/dsa/mt7530.*
>  F:	net/dsa/tag_mtk.c
>  
> +MEDIATEK BOARD LEVEL SHUTDOWN DRIVERS
> +M:	Sean Wang <sean.wang@mediatek.com>
> +L:	linux-pm@vger.kernel.org
> +S:	Maintained
> +F:	Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
> +F:	drivers/power/reset/mt6323-poweroff.c
> +
>  MEDIATEK JPEG DRIVER
>  M:	Rick Chang <rick.chang@mediatek.com>
>  M:	Bin Liu <bin.liu@mediatek.com>
> -- 
> 2.17.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v6 12/13] MAINTAINERS: add Mediatek shutdown drivers

[Sebastian Reichel]

[-- Attachment #1.1: Type: text/plain, Size: 1394 bytes --]

Hi,

On Sun, Aug 18, 2019 at 03:56:10PM +0200, Frank Wunderlich wrote:
> From: Josef Friedl <josef.friedl@speed.at>
> 
> add Section in MAINTAINERS file for poweroff driver
> 
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> changes since v5: none
> changes since v4: none
> changes since v3: moved SOB
> changes since v2: none (=v2 part 6)
> ---

Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>

-- Sebastian

>  MAINTAINERS | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 6426db5198f0..4172a3177633 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -10128,6 +10128,13 @@ S:	Maintained
>  F:	drivers/net/dsa/mt7530.*
>  F:	net/dsa/tag_mtk.c
>  
> +MEDIATEK BOARD LEVEL SHUTDOWN DRIVERS
> +M:	Sean Wang <sean.wang@mediatek.com>
> +L:	linux-pm@vger.kernel.org
> +S:	Maintained
> +F:	Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
> +F:	drivers/power/reset/mt6323-poweroff.c
> +
>  MEDIATEK JPEG DRIVER
>  M:	Rick Chang <rick.chang@mediatek.com>
>  M:	Bin Liu <bin.liu@mediatek.com>
> -- 
> 2.17.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v6 01/13] dt-bindings: mfd: mediatek: mt6397: change to relative paths

[Lee Jones]

On Sun, 18 Aug 2019, Frank Wunderlich wrote:

> paths in dt-bindings should be relative as suggested by Lee Johnes
> 
> Suggested-By: Lee Jones <lee.jones@linaro.org>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> changes since v5: splitted from dt-bindings: add powercontroller
> ---
>  Documentation/devicetree/bindings/mfd/mt6397.txt | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)

Applied, thanks.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v6 01/13] dt-bindings: mfd: mediatek: mt6397: change to relative paths

[Lee Jones]

On Sun, 18 Aug 2019, Frank Wunderlich wrote:

> paths in dt-bindings should be relative as suggested by Lee Johnes
> 
> Suggested-By: Lee Jones <lee.jones@linaro.org>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> changes since v5: splitted from dt-bindings: add powercontroller
> ---
>  Documentation/devicetree/bindings/mfd/mt6397.txt | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)

Applied, thanks.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v6 01/13] dt-bindings: mfd: mediatek: mt6397: change to relative paths

[Lee Jones]

On Sun, 18 Aug 2019, Frank Wunderlich wrote:

> paths in dt-bindings should be relative as suggested by Lee Johnes
> 
> Suggested-By: Lee Jones <lee.jones@linaro.org>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> changes since v5: splitted from dt-bindings: add powercontroller
> ---
>  Documentation/devicetree/bindings/mfd/mt6397.txt | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)

Applied, thanks.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v6 02/13] dt-bindings: mfd: mediatek: update rtc to include mt6323

[Lee Jones]

On Sun, 18 Aug 2019, Frank Wunderlich wrote:

> From: Josef Friedl <josef.friedl@speed.at>
> 
> add mt6323 to rtc-bindings
> 
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> changes since v5: splitted from "dt-bindings: add powercontroller"
> ---
>  Documentation/devicetree/bindings/mfd/mt6397.txt | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)

Applied, thanks.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v6 02/13] dt-bindings: mfd: mediatek: update rtc to include mt6323

[Lee Jones]

On Sun, 18 Aug 2019, Frank Wunderlich wrote:

> From: Josef Friedl <josef.friedl@speed.at>
> 
> add mt6323 to rtc-bindings
> 
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> changes since v5: splitted from "dt-bindings: add powercontroller"
> ---
>  Documentation/devicetree/bindings/mfd/mt6397.txt | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)

Applied, thanks.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v6 02/13] dt-bindings: mfd: mediatek: update rtc to include mt6323

[Lee Jones]

On Sun, 18 Aug 2019, Frank Wunderlich wrote:

> From: Josef Friedl <josef.friedl@speed.at>
> 
> add mt6323 to rtc-bindings
> 
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> changes since v5: splitted from "dt-bindings: add powercontroller"
> ---
>  Documentation/devicetree/bindings/mfd/mt6397.txt | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)

Applied, thanks.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v6 03/13] dt-bindings: mfd: mediatek: add mt6323 power-controller

[Lee Jones]

On Sun, 18 Aug 2019, Frank Wunderlich wrote:

> From: Josef Friedl <josef.friedl@speed.at>
> 
> - add powercontroller-section to existing binding-document
> - add mt6323-pwrc bindings-document with example
> 
> Suggested-by: Frank Wunderlich <frank-w@public-files.de>
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
> ---
> changes since v5: split out non-pwrc related changes
> changes since v4: none
> changes since v3: none
> changes since v2: none (=v2 part 7)
> ---
>  .../devicetree/bindings/mfd/mt6397.txt        |  6 ++++++
>  .../bindings/power/reset/mt6323-poweroff.txt  | 20 +++++++++++++++++++
>  2 files changed, 26 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt

Applied, thanks.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v6 03/13] dt-bindings: mfd: mediatek: add mt6323 power-controller

[Lee Jones]

On Sun, 18 Aug 2019, Frank Wunderlich wrote:

> From: Josef Friedl <josef.friedl@speed.at>
> 
> - add powercontroller-section to existing binding-document
> - add mt6323-pwrc bindings-document with example
> 
> Suggested-by: Frank Wunderlich <frank-w@public-files.de>
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
> ---
> changes since v5: split out non-pwrc related changes
> changes since v4: none
> changes since v3: none
> changes since v2: none (=v2 part 7)
> ---
>  .../devicetree/bindings/mfd/mt6397.txt        |  6 ++++++
>  .../bindings/power/reset/mt6323-poweroff.txt  | 20 +++++++++++++++++++
>  2 files changed, 26 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt

Applied, thanks.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v6 03/13] dt-bindings: mfd: mediatek: add mt6323 power-controller

[Lee Jones]

On Sun, 18 Aug 2019, Frank Wunderlich wrote:

> From: Josef Friedl <josef.friedl@speed.at>
> 
> - add powercontroller-section to existing binding-document
> - add mt6323-pwrc bindings-document with example
> 
> Suggested-by: Frank Wunderlich <frank-w@public-files.de>
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
> ---
> changes since v5: split out non-pwrc related changes
> changes since v4: none
> changes since v3: none
> changes since v2: none (=v2 part 7)
> ---
>  .../devicetree/bindings/mfd/mt6397.txt        |  6 ++++++
>  .../bindings/power/reset/mt6323-poweroff.txt  | 20 +++++++++++++++++++
>  2 files changed, 26 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt

Applied, thanks.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v6 05/13] rtc: mt6397: move some common definitions into rtc.h

[Lee Jones]

On Sun, 18 Aug 2019, Frank Wunderlich wrote:

> From: Josef Friedl <josef.friedl@speed.at>
> 
> move code to separate header-file to reuse definitions later
> in poweroff-driver (drivers/power/reset/mt6323-poweroff.c)
> 
> Suggested-by: Frank Wunderlich <frank-w@public-files.de>
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> changes since v5: none
> changes since v4: none
> changes since v3: none
> changes since v2: add missing commit-message
> ---
>  drivers/rtc/rtc-mt6397.c       | 55 +-------------------------
>  include/linux/mfd/mt6397/rtc.h | 71 ++++++++++++++++++++++++++++++++++
>  2 files changed, 72 insertions(+), 54 deletions(-)
>  create mode 100644 include/linux/mfd/mt6397/rtc.h
> 
> diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
> index b46ed4dc7015..c08ee5edf865 100644
> --- a/drivers/rtc/rtc-mt6397.c
> +++ b/drivers/rtc/rtc-mt6397.c
> @@ -9,60 +9,7 @@
>  #include <linux/module.h>
>  #include <linux/regmap.h>
>  #include <linux/rtc.h>
> -#include <linux/irqdomain.h>
> -#include <linux/platform_device.h>
> -#include <linux/of_address.h>
> -#include <linux/of_irq.h>
> -#include <linux/io.h>
> -#include <linux/mfd/mt6397/core.h>
> -
> -#define RTC_BBPU		0x0000
> -#define RTC_BBPU_CBUSY		BIT(6)
> -
> -#define RTC_WRTGR		0x003c
> -
> -#define RTC_IRQ_STA		0x0002
> -#define RTC_IRQ_STA_AL		BIT(0)
> -#define RTC_IRQ_STA_LP		BIT(3)
> -
> -#define RTC_IRQ_EN		0x0004
> -#define RTC_IRQ_EN_AL		BIT(0)
> -#define RTC_IRQ_EN_ONESHOT	BIT(2)
> -#define RTC_IRQ_EN_LP		BIT(3)
> -#define RTC_IRQ_EN_ONESHOT_AL	(RTC_IRQ_EN_ONESHOT | RTC_IRQ_EN_AL)
> -
> -#define RTC_AL_MASK		0x0008
> -#define RTC_AL_MASK_DOW		BIT(4)
> -
> -#define RTC_TC_SEC		0x000a
> -/* Min, Hour, Dom... register offset to RTC_TC_SEC */
> -#define RTC_OFFSET_SEC		0
> -#define RTC_OFFSET_MIN		1
> -#define RTC_OFFSET_HOUR		2
> -#define RTC_OFFSET_DOM		3
> -#define RTC_OFFSET_DOW		4
> -#define RTC_OFFSET_MTH		5
> -#define RTC_OFFSET_YEAR		6
> -#define RTC_OFFSET_COUNT	7
> -
> -#define RTC_AL_SEC		0x0018
> -
> -#define RTC_PDN2		0x002e
> -#define RTC_PDN2_PWRON_ALARM	BIT(4)
> -
> -#define RTC_MIN_YEAR		1968
> -#define RTC_BASE_YEAR		1900
> -#define RTC_NUM_YEARS		128
> -#define RTC_MIN_YEAR_OFFSET	(RTC_MIN_YEAR - RTC_BASE_YEAR)
> -
> -struct mt6397_rtc {
> -	struct device		*dev;
> -	struct rtc_device	*rtc_dev;
> -	struct mutex		lock;
> -	struct regmap		*regmap;
> -	int			irq;
> -	u32			addr_base;
> -};
> +#include <linux/mfd/mt6397/rtc.h>
>  
>  static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
>  {
> diff --git a/include/linux/mfd/mt6397/rtc.h b/include/linux/mfd/mt6397/rtc.h
> new file mode 100644
> index 000000000000..b702c29e8c74
> --- /dev/null
> +++ b/include/linux/mfd/mt6397/rtc.h
> @@ -0,0 +1,71 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (C) 2014-2018 MediaTek Inc.

This is out of date.

Once corrected, please apply my:

For my own reference:
  Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v6 05/13] rtc: mt6397: move some common definitions into rtc.h

[Lee Jones]

On Sun, 18 Aug 2019, Frank Wunderlich wrote:

> From: Josef Friedl <josef.friedl@speed.at>
> 
> move code to separate header-file to reuse definitions later
> in poweroff-driver (drivers/power/reset/mt6323-poweroff.c)
> 
> Suggested-by: Frank Wunderlich <frank-w@public-files.de>
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> changes since v5: none
> changes since v4: none
> changes since v3: none
> changes since v2: add missing commit-message
> ---
>  drivers/rtc/rtc-mt6397.c       | 55 +-------------------------
>  include/linux/mfd/mt6397/rtc.h | 71 ++++++++++++++++++++++++++++++++++
>  2 files changed, 72 insertions(+), 54 deletions(-)
>  create mode 100644 include/linux/mfd/mt6397/rtc.h
> 
> diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
> index b46ed4dc7015..c08ee5edf865 100644
> --- a/drivers/rtc/rtc-mt6397.c
> +++ b/drivers/rtc/rtc-mt6397.c
> @@ -9,60 +9,7 @@
>  #include <linux/module.h>
>  #include <linux/regmap.h>
>  #include <linux/rtc.h>
> -#include <linux/irqdomain.h>
> -#include <linux/platform_device.h>
> -#include <linux/of_address.h>
> -#include <linux/of_irq.h>
> -#include <linux/io.h>
> -#include <linux/mfd/mt6397/core.h>
> -
> -#define RTC_BBPU		0x0000
> -#define RTC_BBPU_CBUSY		BIT(6)
> -
> -#define RTC_WRTGR		0x003c
> -
> -#define RTC_IRQ_STA		0x0002
> -#define RTC_IRQ_STA_AL		BIT(0)
> -#define RTC_IRQ_STA_LP		BIT(3)
> -
> -#define RTC_IRQ_EN		0x0004
> -#define RTC_IRQ_EN_AL		BIT(0)
> -#define RTC_IRQ_EN_ONESHOT	BIT(2)
> -#define RTC_IRQ_EN_LP		BIT(3)
> -#define RTC_IRQ_EN_ONESHOT_AL	(RTC_IRQ_EN_ONESHOT | RTC_IRQ_EN_AL)
> -
> -#define RTC_AL_MASK		0x0008
> -#define RTC_AL_MASK_DOW		BIT(4)
> -
> -#define RTC_TC_SEC		0x000a
> -/* Min, Hour, Dom... register offset to RTC_TC_SEC */
> -#define RTC_OFFSET_SEC		0
> -#define RTC_OFFSET_MIN		1
> -#define RTC_OFFSET_HOUR		2
> -#define RTC_OFFSET_DOM		3
> -#define RTC_OFFSET_DOW		4
> -#define RTC_OFFSET_MTH		5
> -#define RTC_OFFSET_YEAR		6
> -#define RTC_OFFSET_COUNT	7
> -
> -#define RTC_AL_SEC		0x0018
> -
> -#define RTC_PDN2		0x002e
> -#define RTC_PDN2_PWRON_ALARM	BIT(4)
> -
> -#define RTC_MIN_YEAR		1968
> -#define RTC_BASE_YEAR		1900
> -#define RTC_NUM_YEARS		128
> -#define RTC_MIN_YEAR_OFFSET	(RTC_MIN_YEAR - RTC_BASE_YEAR)
> -
> -struct mt6397_rtc {
> -	struct device		*dev;
> -	struct rtc_device	*rtc_dev;
> -	struct mutex		lock;
> -	struct regmap		*regmap;
> -	int			irq;
> -	u32			addr_base;
> -};
> +#include <linux/mfd/mt6397/rtc.h>
>  
>  static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
>  {
> diff --git a/include/linux/mfd/mt6397/rtc.h b/include/linux/mfd/mt6397/rtc.h
> new file mode 100644
> index 000000000000..b702c29e8c74
> --- /dev/null
> +++ b/include/linux/mfd/mt6397/rtc.h
> @@ -0,0 +1,71 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (C) 2014-2018 MediaTek Inc.

This is out of date.

Once corrected, please apply my:

For my own reference:
  Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v6 05/13] rtc: mt6397: move some common definitions into rtc.h

[Lee Jones]

On Sun, 18 Aug 2019, Frank Wunderlich wrote:

> From: Josef Friedl <josef.friedl@speed.at>
> 
> move code to separate header-file to reuse definitions later
> in poweroff-driver (drivers/power/reset/mt6323-poweroff.c)
> 
> Suggested-by: Frank Wunderlich <frank-w@public-files.de>
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> changes since v5: none
> changes since v4: none
> changes since v3: none
> changes since v2: add missing commit-message
> ---
>  drivers/rtc/rtc-mt6397.c       | 55 +-------------------------
>  include/linux/mfd/mt6397/rtc.h | 71 ++++++++++++++++++++++++++++++++++
>  2 files changed, 72 insertions(+), 54 deletions(-)
>  create mode 100644 include/linux/mfd/mt6397/rtc.h
> 
> diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
> index b46ed4dc7015..c08ee5edf865 100644
> --- a/drivers/rtc/rtc-mt6397.c
> +++ b/drivers/rtc/rtc-mt6397.c
> @@ -9,60 +9,7 @@
>  #include <linux/module.h>
>  #include <linux/regmap.h>
>  #include <linux/rtc.h>
> -#include <linux/irqdomain.h>
> -#include <linux/platform_device.h>
> -#include <linux/of_address.h>
> -#include <linux/of_irq.h>
> -#include <linux/io.h>
> -#include <linux/mfd/mt6397/core.h>
> -
> -#define RTC_BBPU		0x0000
> -#define RTC_BBPU_CBUSY		BIT(6)
> -
> -#define RTC_WRTGR		0x003c
> -
> -#define RTC_IRQ_STA		0x0002
> -#define RTC_IRQ_STA_AL		BIT(0)
> -#define RTC_IRQ_STA_LP		BIT(3)
> -
> -#define RTC_IRQ_EN		0x0004
> -#define RTC_IRQ_EN_AL		BIT(0)
> -#define RTC_IRQ_EN_ONESHOT	BIT(2)
> -#define RTC_IRQ_EN_LP		BIT(3)
> -#define RTC_IRQ_EN_ONESHOT_AL	(RTC_IRQ_EN_ONESHOT | RTC_IRQ_EN_AL)
> -
> -#define RTC_AL_MASK		0x0008
> -#define RTC_AL_MASK_DOW		BIT(4)
> -
> -#define RTC_TC_SEC		0x000a
> -/* Min, Hour, Dom... register offset to RTC_TC_SEC */
> -#define RTC_OFFSET_SEC		0
> -#define RTC_OFFSET_MIN		1
> -#define RTC_OFFSET_HOUR		2
> -#define RTC_OFFSET_DOM		3
> -#define RTC_OFFSET_DOW		4
> -#define RTC_OFFSET_MTH		5
> -#define RTC_OFFSET_YEAR		6
> -#define RTC_OFFSET_COUNT	7
> -
> -#define RTC_AL_SEC		0x0018
> -
> -#define RTC_PDN2		0x002e
> -#define RTC_PDN2_PWRON_ALARM	BIT(4)
> -
> -#define RTC_MIN_YEAR		1968
> -#define RTC_BASE_YEAR		1900
> -#define RTC_NUM_YEARS		128
> -#define RTC_MIN_YEAR_OFFSET	(RTC_MIN_YEAR - RTC_BASE_YEAR)
> -
> -struct mt6397_rtc {
> -	struct device		*dev;
> -	struct rtc_device	*rtc_dev;
> -	struct mutex		lock;
> -	struct regmap		*regmap;
> -	int			irq;
> -	u32			addr_base;
> -};
> +#include <linux/mfd/mt6397/rtc.h>
>  
>  static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
>  {
> diff --git a/include/linux/mfd/mt6397/rtc.h b/include/linux/mfd/mt6397/rtc.h
> new file mode 100644
> index 000000000000..b702c29e8c74
> --- /dev/null
> +++ b/include/linux/mfd/mt6397/rtc.h
> @@ -0,0 +1,71 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (C) 2014-2018 MediaTek Inc.

This is out of date.

Once corrected, please apply my:

For my own reference:
  Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v6 06/13] mfd: mt6397: add mutex include

[Lee Jones]

On Sun, 18 Aug 2019, Frank Wunderlich wrote:

> From: Josef Friedl <josef.friedl@speed.at>
> 
> add missing mutex.h

In future, please use correct English grammar in commit messages.

I will fix them for this submission.

> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> changes since v5: separated from "power: reset: add driver for mt6323 poweroff"
> ---
>  include/linux/mfd/mt6397/core.h | 2 ++
>  1 file changed, 2 insertions(+)

Applied, thanks.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v6 06/13] mfd: mt6397: add mutex include

[Lee Jones]

On Sun, 18 Aug 2019, Frank Wunderlich wrote:

> From: Josef Friedl <josef.friedl@speed.at>
> 
> add missing mutex.h

In future, please use correct English grammar in commit messages.

I will fix them for this submission.

> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> changes since v5: separated from "power: reset: add driver for mt6323 poweroff"
> ---
>  include/linux/mfd/mt6397/core.h | 2 ++
>  1 file changed, 2 insertions(+)

Applied, thanks.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v6 06/13] mfd: mt6397: add mutex include

[Lee Jones]

On Sun, 18 Aug 2019, Frank Wunderlich wrote:

> From: Josef Friedl <josef.friedl@speed.at>
> 
> add missing mutex.h

In future, please use correct English grammar in commit messages.

I will fix them for this submission.

> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> changes since v5: separated from "power: reset: add driver for mt6323 poweroff"
> ---
>  include/linux/mfd/mt6397/core.h | 2 ++
>  1 file changed, 2 insertions(+)

Applied, thanks.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v6 08/13] mfd: mt6323: some improvements of mt6397-core

[Lee Jones]

On Sun, 18 Aug 2019, Frank Wunderlich wrote:

> From: Josef Friedl <josef.friedl@speed.at>
> 
> simplyfications (resource definitions my DEFINE_RES_* macros)
> 
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
> ---
> changes since v5: none
> changes since v4: do not touch year of copyright
> changes since v3: moved part 6 forward to let compatible and driver be together
> changes since v2: splitted v2 part 4 into 6+7
> ---
>  drivers/mfd/mt6397-core.c | 13 +++----------
>  1 file changed, 3 insertions(+), 10 deletions(-)

Applied, thanks.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v6 08/13] mfd: mt6323: some improvements of mt6397-core

[Lee Jones]

On Sun, 18 Aug 2019, Frank Wunderlich wrote:

> From: Josef Friedl <josef.friedl@speed.at>
> 
> simplyfications (resource definitions my DEFINE_RES_* macros)
> 
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
> ---
> changes since v5: none
> changes since v4: do not touch year of copyright
> changes since v3: moved part 6 forward to let compatible and driver be together
> changes since v2: splitted v2 part 4 into 6+7
> ---
>  drivers/mfd/mt6397-core.c | 13 +++----------
>  1 file changed, 3 insertions(+), 10 deletions(-)

Applied, thanks.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v6 08/13] mfd: mt6323: some improvements of mt6397-core

[Lee Jones]

On Sun, 18 Aug 2019, Frank Wunderlich wrote:

> From: Josef Friedl <josef.friedl@speed.at>
> 
> simplyfications (resource definitions my DEFINE_RES_* macros)
> 
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
> ---
> changes since v5: none
> changes since v4: do not touch year of copyright
> changes since v3: moved part 6 forward to let compatible and driver be together
> changes since v2: splitted v2 part 4 into 6+7
> ---
>  drivers/mfd/mt6397-core.c | 13 +++----------
>  1 file changed, 3 insertions(+), 10 deletions(-)

Applied, thanks.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v6 10/13] mfd: mt6323: add mt6323 rtc+pwrc

[Lee Jones]

On Sun, 18 Aug 2019, Frank Wunderlich wrote:

> From: Josef Friedl <josef.friedl@speed.at>
> 
> add entry for rtc and power-controller to mt6323
> 
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
> ---
> changes since v5: none
> changes since v4: none
> changes since v3: none
> changes since v2: only splitting, second part of v2 part 4
> ---
>  drivers/mfd/mt6397-core.c | 25 +++++++++++++++++++++++++
>  1 file changed, 25 insertions(+)

Applied, thanks.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v6 10/13] mfd: mt6323: add mt6323 rtc+pwrc

[Lee Jones]

On Sun, 18 Aug 2019, Frank Wunderlich wrote:

> From: Josef Friedl <josef.friedl@speed.at>
> 
> add entry for rtc and power-controller to mt6323
> 
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
> ---
> changes since v5: none
> changes since v4: none
> changes since v3: none
> changes since v2: only splitting, second part of v2 part 4
> ---
>  drivers/mfd/mt6397-core.c | 25 +++++++++++++++++++++++++
>  1 file changed, 25 insertions(+)

Applied, thanks.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH v6 10/13] mfd: mt6323: add mt6323 rtc+pwrc

[Lee Jones]

On Sun, 18 Aug 2019, Frank Wunderlich wrote:

> From: Josef Friedl <josef.friedl@speed.at>
> 
> add entry for rtc and power-controller to mt6323
> 
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
> ---
> changes since v5: none
> changes since v4: none
> changes since v3: none
> changes since v2: only splitting, second part of v2 part 4
> ---
>  drivers/mfd/mt6397-core.c | 25 +++++++++++++++++++++++++
>  1 file changed, 25 insertions(+)

Applied, thanks.

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v6 00/13] implement poweroff for mt6323 / bpi-r2

[Frank Wunderlich]

Hi,

Just a friedly reminder.

MFD-part was applied and visible in linux-next, the other parts acknowledged by maintainers. Is anything additional needed before applying the rtc/power/dts-parts?

Regards Frank

Re: [PATCH v6 00/13] implement poweroff for mt6323 / bpi-r2

[Frank Wunderlich]

Hi,

Just a friedly reminder.

MFD-part was applied and visible in linux-next, the other parts acknowledged by maintainers. Is anything additional needed before applying the rtc/power/dts-parts?

Regards Frank

Re: [PATCH v6 00/13] implement poweroff for mt6323 / bpi-r2

[Frank Wunderlich]

Hi,

Just a friedly reminder.

MFD-part was applied and visible in linux-next, the other parts acknowledged by maintainers. Is anything additional needed before applying the rtc/power/dts-parts?

Regards Frank

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v6 12/13] MAINTAINERS: add Mediatek shutdown drivers

[Frank Wunderlich]

From: Josef Friedl <josef.friedl@speed.at>

add Section in MAINTAINERS file for poweroff driver

Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
changes since v5: none
changes since v4: none
changes since v3: moved SOB
changes since v2: none (=v2 part 6)
---
 MAINTAINERS | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 6426db5198f0..4172a3177633 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -10128,6 +10128,13 @@ S:	Maintained
 F:	drivers/net/dsa/mt7530.*
 F:	net/dsa/tag_mtk.c
 
+MEDIATEK BOARD LEVEL SHUTDOWN DRIVERS
+M:	Sean Wang <sean.wang@mediatek.com>
+L:	linux-pm@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt
+F:	drivers/power/reset/mt6323-poweroff.c
+
 MEDIATEK JPEG DRIVER
 M:	Rick Chang <rick.chang@mediatek.com>
 M:	Bin Liu <bin.liu@mediatek.com>
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel