From: Jerome Brunet <jbrunet@baylibre.com> To: Kevin Hilman <khilman@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com>, linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 2/5] arm64: dts: meson: g12: fix audio fifo reg size Date: Thu, 5 Sep 2019 14:59:53 +0200 [thread overview] Message-ID: <20190905125956.4384-3-jbrunet@baylibre.com> (raw) In-Reply-To: <20190905125956.4384-1-jbrunet@baylibre.com> The register region size initially is too small to access all the fifo registers. Fixes: c59b7fe5aafd ("arm64: dts: meson: g12a: add audio fifos") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> --- arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index 3f39e020f74e..0ee8a369c547 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -1509,7 +1509,7 @@ toddr_a: audio-controller@100 { compatible = "amlogic,g12a-toddr", "amlogic,axg-toddr"; - reg = <0x0 0x100 0x0 0x1c>; + reg = <0x0 0x100 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "TODDR_A"; interrupts = <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>; @@ -1521,7 +1521,7 @@ toddr_b: audio-controller@140 { compatible = "amlogic,g12a-toddr", "amlogic,axg-toddr"; - reg = <0x0 0x140 0x0 0x1c>; + reg = <0x0 0x140 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "TODDR_B"; interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>; @@ -1533,7 +1533,7 @@ toddr_c: audio-controller@180 { compatible = "amlogic,g12a-toddr", "amlogic,axg-toddr"; - reg = <0x0 0x180 0x0 0x1c>; + reg = <0x0 0x180 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "TODDR_C"; interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>; @@ -1545,7 +1545,7 @@ frddr_a: audio-controller@1c0 { compatible = "amlogic,g12a-frddr", "amlogic,axg-frddr"; - reg = <0x0 0x1c0 0x0 0x1c>; + reg = <0x0 0x1c0 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "FRDDR_A"; interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>; @@ -1557,7 +1557,7 @@ frddr_b: audio-controller@200 { compatible = "amlogic,g12a-frddr", "amlogic,axg-frddr"; - reg = <0x0 0x200 0x0 0x1c>; + reg = <0x0 0x200 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "FRDDR_B"; interrupts = <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>; @@ -1569,7 +1569,7 @@ frddr_c: audio-controller@240 { compatible = "amlogic,g12a-frddr", "amlogic,axg-frddr"; - reg = <0x0 0x240 0x0 0x1c>; + reg = <0x0 0x240 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "FRDDR_C"; interrupts = <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>; -- 2.21.0
WARNING: multiple messages have this Message-ID (diff)
From: Jerome Brunet <jbrunet@baylibre.com> To: Kevin Hilman <khilman@baylibre.com> Cc: linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Jerome Brunet <jbrunet@baylibre.com> Subject: [PATCH 2/5] arm64: dts: meson: g12: fix audio fifo reg size Date: Thu, 5 Sep 2019 14:59:53 +0200 [thread overview] Message-ID: <20190905125956.4384-3-jbrunet@baylibre.com> (raw) In-Reply-To: <20190905125956.4384-1-jbrunet@baylibre.com> The register region size initially is too small to access all the fifo registers. Fixes: c59b7fe5aafd ("arm64: dts: meson: g12a: add audio fifos") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> --- arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index 3f39e020f74e..0ee8a369c547 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -1509,7 +1509,7 @@ toddr_a: audio-controller@100 { compatible = "amlogic,g12a-toddr", "amlogic,axg-toddr"; - reg = <0x0 0x100 0x0 0x1c>; + reg = <0x0 0x100 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "TODDR_A"; interrupts = <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>; @@ -1521,7 +1521,7 @@ toddr_b: audio-controller@140 { compatible = "amlogic,g12a-toddr", "amlogic,axg-toddr"; - reg = <0x0 0x140 0x0 0x1c>; + reg = <0x0 0x140 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "TODDR_B"; interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>; @@ -1533,7 +1533,7 @@ toddr_c: audio-controller@180 { compatible = "amlogic,g12a-toddr", "amlogic,axg-toddr"; - reg = <0x0 0x180 0x0 0x1c>; + reg = <0x0 0x180 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "TODDR_C"; interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>; @@ -1545,7 +1545,7 @@ frddr_a: audio-controller@1c0 { compatible = "amlogic,g12a-frddr", "amlogic,axg-frddr"; - reg = <0x0 0x1c0 0x0 0x1c>; + reg = <0x0 0x1c0 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "FRDDR_A"; interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>; @@ -1557,7 +1557,7 @@ frddr_b: audio-controller@200 { compatible = "amlogic,g12a-frddr", "amlogic,axg-frddr"; - reg = <0x0 0x200 0x0 0x1c>; + reg = <0x0 0x200 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "FRDDR_B"; interrupts = <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>; @@ -1569,7 +1569,7 @@ frddr_c: audio-controller@240 { compatible = "amlogic,g12a-frddr", "amlogic,axg-frddr"; - reg = <0x0 0x240 0x0 0x1c>; + reg = <0x0 0x240 0x0 0x2c>; #sound-dai-cells = <0>; sound-name-prefix = "FRDDR_C"; interrupts = <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>; -- 2.21.0 _______________________________________________ linux-amlogic mailing list linux-amlogic@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2019-09-05 13:00 UTC|newest] Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-09-05 12:59 [PATCH 0/5] arm64: dts: meson: audio updates Jerome Brunet 2019-09-05 12:59 ` Jerome Brunet 2019-09-05 12:59 ` [PATCH 1/5] arm64: dts: meson: axg: fix audio fifo reg size Jerome Brunet 2019-09-05 12:59 ` Jerome Brunet 2019-09-05 12:59 ` Jerome Brunet [this message] 2019-09-05 12:59 ` [PATCH 2/5] arm64: dts: meson: g12: " Jerome Brunet 2019-09-05 12:59 ` [PATCH 3/5] arm64: dts: meson: g12: add a g12 layer Jerome Brunet 2019-09-05 12:59 ` Jerome Brunet 2019-09-05 12:59 ` [PATCH 4/5] arm64: dts: meson: g12: factor the power domain Jerome Brunet 2019-09-05 12:59 ` Jerome Brunet 2019-09-05 12:59 ` [PATCH 5/5] arm64: dts: meson: g12: move audio bus out of g12-common Jerome Brunet 2019-09-05 12:59 ` Jerome Brunet 2019-09-24 18:34 ` [PATCH 0/5] arm64: dts: meson: audio updates Kevin Hilman 2019-09-24 18:34 ` Kevin Hilman 2019-09-24 18:34 ` Kevin Hilman
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20190905125956.4384-3-jbrunet@baylibre.com \ --to=jbrunet@baylibre.com \ --cc=devicetree@vger.kernel.org \ --cc=khilman@baylibre.com \ --cc=linux-amlogic@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.