* Re: [PATCH 2/2] drm/i915: Don't advertise modes that exceed the max plane size
2019-09-05 13:50 ` [PATCH 2/2] drm/i915: Don't advertise modes that exceed the max plane size Ville Syrjala
@ 2019-09-18 14:08 ` Maarten Lankhorst
2019-09-18 14:28 ` Manasi Navare
2019-09-18 15:07 ` [PATCH v2 " Ville Syrjala
2 siblings, 0 replies; 17+ messages in thread
From: Maarten Lankhorst @ 2019-09-18 14:08 UTC (permalink / raw)
To: Ville Syrjala, intel-gfx; +Cc: Leho Kraav
Op 05-09-2019 om 15:50 schreef Ville Syrjala:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> Modern platforms allow the transcoders hdisplay/vdisplay to exceed the
> planes' max resolution. This has the nasty implication that modes on the
> connectors' mode list may not be usable when the user asks for a
> fullscreen plane. Seeing as that is the most common use case it seems
> prudent to filter out modes that don't allow for fullscreen planes to
> be enabled.
>
> Let's do that in the connetor .mode_valid() hook so that normally
> such modes are kept hidden but the user is still able to forcibly
> specify such a mode if they know they don't need fullscreen planes.
>
> This is in line with ealier policies regarding certain clock limits.
> The idea is to prevent the casual user from encountering a mode that
> would fail under typical conditions, but allow the expert user to
> force things if they so wish.
>
> Maybe in the future we should consider automagically using two
> planes when one can't cover the entire screen? Wouldn't be a
> great match for the current uapi with explicit planes though,
> but I guess no worse than using two pipes (which we apparently
> have to in the future anyway). Either that or we'd have to
> teach userspace to do it for us.
>
> Cc: Leho Kraav <leho@kraav.com>
> Cc: Sean Paul <sean@poorly.run>
> Cc: José Roberto de Souza <jose.souza@intel.com>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 31 ++++++++++++++++++++
> drivers/gpu/drm/i915/display/intel_display.h | 4 +++
> drivers/gpu/drm/i915/display/intel_dp.c | 2 +-
> drivers/gpu/drm/i915/display/intel_dsi.c | 3 +-
> drivers/gpu/drm/i915/display/intel_hdmi.c | 4 ++-
> 5 files changed, 41 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 4e63342ea597..99466a29bf36 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -15846,6 +15846,7 @@ intel_mode_valid(struct drm_device *dev,
> DRM_MODE_FLAG_CLKDIV2))
> return MODE_BAD;
>
> + /* Transcoder timing limits */
> if (INTEL_GEN(dev_priv) >= 9 ||
> IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) {
> hdisplay_max = 8192; /* FDI max 4096 handled elsewhere */
> @@ -15879,6 +15880,36 @@ intel_mode_valid(struct drm_device *dev,
> return MODE_OK;
> }
>
> +enum drm_mode_status
> +intel_mode_valid_max_plane_size(struct drm_i915_private *dev_priv,
> + const struct drm_display_mode *mode)
> +{
> + int plane_width_max, plane_height_max;
> +
> + /*
> + * intel_mode_valid() should be
> + * sufficient on older platforms.
> + */
> + if (INTEL_GEN(dev_priv) < 9)
> + return MODE_OK;
> +
> + /*
> + * Most people will probably want a fullscreen
> + * plane so let's not advertize modes that are
> + * too big for that.
> + */
> + plane_width_max = 5120;
> + plane_height_max = 4096;
> +
> + if (mode->hdisplay > plane_width_max)
> + return MODE_H_ILLEGAL;
> +
> + if (mode->vdisplay > plane_height_max)
> + return MODE_V_ILLEGAL;
> +
> + return MODE_OK;
> +}
> +
> static const struct drm_mode_config_funcs intel_mode_funcs = {
> .fb_create = intel_user_framebuffer_create,
> .get_format_info = intel_get_format_info,
> diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
> index 33fd523c4622..ecabb827eb87 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.h
> +++ b/drivers/gpu/drm/i915/display/intel_display.h
> @@ -32,6 +32,7 @@ enum link_m_n_set;
> struct dpll;
> struct drm_connector;
> struct drm_device;
> +struct drm_display_mode;
> struct drm_encoder;
> struct drm_file;
> struct drm_framebuffer;
> @@ -447,6 +448,9 @@ void lpt_disable_clkout_dp(struct drm_i915_private *dev_priv);
> u32 intel_plane_fb_max_stride(struct drm_i915_private *dev_priv,
> u32 pixel_format, u64 modifier);
> bool intel_plane_can_remap(const struct intel_plane_state *plane_state);
> +enum drm_mode_status
> +intel_mode_valid_max_plane_size(struct drm_i915_private *dev_priv,
> + const struct drm_display_mode *mode);
> enum phy intel_port_to_phy(struct drm_i915_private *i915, enum port port);
>
> void intel_plane_destroy(struct drm_plane *plane);
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index d09133a958e1..ccaf9f00b747 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -562,7 +562,7 @@ intel_dp_mode_valid(struct drm_connector *connector,
> if (mode->flags & DRM_MODE_FLAG_DBLCLK)
> return MODE_H_ILLEGAL;
>
> - return MODE_OK;
> + return intel_mode_valid_max_plane_size(dev_priv, mode);
> }
>
> u32 intel_dp_pack_aux(const u8 *src, int src_bytes)
> diff --git a/drivers/gpu/drm/i915/display/intel_dsi.c b/drivers/gpu/drm/i915/display/intel_dsi.c
> index 5fec02aceaed..a2a937109a5a 100644
> --- a/drivers/gpu/drm/i915/display/intel_dsi.c
> +++ b/drivers/gpu/drm/i915/display/intel_dsi.c
> @@ -55,6 +55,7 @@ int intel_dsi_get_modes(struct drm_connector *connector)
> enum drm_mode_status intel_dsi_mode_valid(struct drm_connector *connector,
> struct drm_display_mode *mode)
> {
> + struct drm_i915_private *dev_priv = to_i915(connector->dev);
> struct intel_connector *intel_connector = to_intel_connector(connector);
> const struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
> int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
> @@ -73,7 +74,7 @@ enum drm_mode_status intel_dsi_mode_valid(struct drm_connector *connector,
> return MODE_CLOCK_HIGH;
> }
>
> - return MODE_OK;
> + return intel_mode_valid_max_plane_size(dev_priv, mode);
> }
>
> struct intel_dsi_host *intel_dsi_host_init(struct intel_dsi *intel_dsi,
> diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
> index c500fc9154c8..dbc686515dce 100644
> --- a/drivers/gpu/drm/i915/display/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
> @@ -2188,8 +2188,10 @@ intel_hdmi_mode_valid(struct drm_connector *connector,
> status = hdmi_port_clock_valid(hdmi, clock * 5 / 4,
> true, force_dvi);
> }
> + if (status != MODE_OK)
> + return status;
>
> - return status;
> + return intel_mode_valid_max_plane_size(dev_priv, mode);
> }
>
> static bool hdmi_deep_color_possible(const struct intel_crtc_state *crtc_state,
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 17+ messages in thread* Re: [PATCH 2/2] drm/i915: Don't advertise modes that exceed the max plane size
2019-09-05 13:50 ` [PATCH 2/2] drm/i915: Don't advertise modes that exceed the max plane size Ville Syrjala
2019-09-18 14:08 ` Maarten Lankhorst
@ 2019-09-18 14:28 ` Manasi Navare
2019-09-18 14:59 ` Ville Syrjälä
2019-09-18 15:07 ` [PATCH v2 " Ville Syrjala
2 siblings, 1 reply; 17+ messages in thread
From: Manasi Navare @ 2019-09-18 14:28 UTC (permalink / raw)
To: Ville Syrjala; +Cc: Leho Kraav, intel-gfx
On Thu, Sep 05, 2019 at 04:50:44PM +0300, Ville Syrjala wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> Modern platforms allow the transcoders hdisplay/vdisplay to exceed the
> planes' max resolution. This has the nasty implication that modes on the
> connectors' mode list may not be usable when the user asks for a
> fullscreen plane. Seeing as that is the most common use case it seems
> prudent to filter out modes that don't allow for fullscreen planes to
> be enabled.
>
> Let's do that in the connetor .mode_valid() hook so that normally
> such modes are kept hidden but the user is still able to forcibly
> specify such a mode if they know they don't need fullscreen planes.
>
> This is in line with ealier policies regarding certain clock limits.
> The idea is to prevent the casual user from encountering a mode that
> would fail under typical conditions, but allow the expert user to
> force things if they so wish.
>
> Maybe in the future we should consider automagically using two
> planes when one can't cover the entire screen? Wouldn't be a
> great match for the current uapi with explicit planes though,
> but I guess no worse than using two pipes (which we apparently
> have to in the future anyway). Either that or we'd have to
> teach userspace to do it for us.
>
> Cc: Leho Kraav <leho@kraav.com>
> Cc: Sean Paul <sean@poorly.run>
> Cc: José Roberto de Souza <jose.souza@intel.com>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 31 ++++++++++++++++++++
> drivers/gpu/drm/i915/display/intel_display.h | 4 +++
> drivers/gpu/drm/i915/display/intel_dp.c | 2 +-
> drivers/gpu/drm/i915/display/intel_dsi.c | 3 +-
> drivers/gpu/drm/i915/display/intel_hdmi.c | 4 ++-
> 5 files changed, 41 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 4e63342ea597..99466a29bf36 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -15846,6 +15846,7 @@ intel_mode_valid(struct drm_device *dev,
> DRM_MODE_FLAG_CLKDIV2))
> return MODE_BAD;
>
> + /* Transcoder timing limits */
> if (INTEL_GEN(dev_priv) >= 9 ||
> IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) {
> hdisplay_max = 8192; /* FDI max 4096 handled elsewhere */
> @@ -15879,6 +15880,36 @@ intel_mode_valid(struct drm_device *dev,
> return MODE_OK;
> }
>
> +enum drm_mode_status
> +intel_mode_valid_max_plane_size(struct drm_i915_private *dev_priv,
> + const struct drm_display_mode *mode)
> +{
> + int plane_width_max, plane_height_max;
> +
> + /*
> + * intel_mode_valid() should be
> + * sufficient on older platforms.
> + */
> + if (INTEL_GEN(dev_priv) < 9)
> + return MODE_OK;
> +
> + /*
> + * Most people will probably want a fullscreen
> + * plane so let's not advertize modes that are
> + * too big for that.
> + */
> + plane_width_max = 5120;
> + plane_height_max = 4096;
For ICL+, shouldnt tthe plane_height_max be 4320?
Manasi
> +
> + if (mode->hdisplay > plane_width_max)
> + return MODE_H_ILLEGAL;
> +
> + if (mode->vdisplay > plane_height_max)
> + return MODE_V_ILLEGAL;
> +
> + return MODE_OK;
> +}
> +
> static const struct drm_mode_config_funcs intel_mode_funcs = {
> .fb_create = intel_user_framebuffer_create,
> .get_format_info = intel_get_format_info,
> diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
> index 33fd523c4622..ecabb827eb87 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.h
> +++ b/drivers/gpu/drm/i915/display/intel_display.h
> @@ -32,6 +32,7 @@ enum link_m_n_set;
> struct dpll;
> struct drm_connector;
> struct drm_device;
> +struct drm_display_mode;
> struct drm_encoder;
> struct drm_file;
> struct drm_framebuffer;
> @@ -447,6 +448,9 @@ void lpt_disable_clkout_dp(struct drm_i915_private *dev_priv);
> u32 intel_plane_fb_max_stride(struct drm_i915_private *dev_priv,
> u32 pixel_format, u64 modifier);
> bool intel_plane_can_remap(const struct intel_plane_state *plane_state);
> +enum drm_mode_status
> +intel_mode_valid_max_plane_size(struct drm_i915_private *dev_priv,
> + const struct drm_display_mode *mode);
> enum phy intel_port_to_phy(struct drm_i915_private *i915, enum port port);
>
> void intel_plane_destroy(struct drm_plane *plane);
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index d09133a958e1..ccaf9f00b747 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -562,7 +562,7 @@ intel_dp_mode_valid(struct drm_connector *connector,
> if (mode->flags & DRM_MODE_FLAG_DBLCLK)
> return MODE_H_ILLEGAL;
>
> - return MODE_OK;
> + return intel_mode_valid_max_plane_size(dev_priv, mode);
> }
>
> u32 intel_dp_pack_aux(const u8 *src, int src_bytes)
> diff --git a/drivers/gpu/drm/i915/display/intel_dsi.c b/drivers/gpu/drm/i915/display/intel_dsi.c
> index 5fec02aceaed..a2a937109a5a 100644
> --- a/drivers/gpu/drm/i915/display/intel_dsi.c
> +++ b/drivers/gpu/drm/i915/display/intel_dsi.c
> @@ -55,6 +55,7 @@ int intel_dsi_get_modes(struct drm_connector *connector)
> enum drm_mode_status intel_dsi_mode_valid(struct drm_connector *connector,
> struct drm_display_mode *mode)
> {
> + struct drm_i915_private *dev_priv = to_i915(connector->dev);
> struct intel_connector *intel_connector = to_intel_connector(connector);
> const struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
> int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
> @@ -73,7 +74,7 @@ enum drm_mode_status intel_dsi_mode_valid(struct drm_connector *connector,
> return MODE_CLOCK_HIGH;
> }
>
> - return MODE_OK;
> + return intel_mode_valid_max_plane_size(dev_priv, mode);
> }
>
> struct intel_dsi_host *intel_dsi_host_init(struct intel_dsi *intel_dsi,
> diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
> index c500fc9154c8..dbc686515dce 100644
> --- a/drivers/gpu/drm/i915/display/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
> @@ -2188,8 +2188,10 @@ intel_hdmi_mode_valid(struct drm_connector *connector,
> status = hdmi_port_clock_valid(hdmi, clock * 5 / 4,
> true, force_dvi);
> }
> + if (status != MODE_OK)
> + return status;
>
> - return status;
> + return intel_mode_valid_max_plane_size(dev_priv, mode);
> }
>
> static bool hdmi_deep_color_possible(const struct intel_crtc_state *crtc_state,
> --
> 2.21.0
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 17+ messages in thread* Re: [PATCH 2/2] drm/i915: Don't advertise modes that exceed the max plane size
2019-09-18 14:28 ` Manasi Navare
@ 2019-09-18 14:59 ` Ville Syrjälä
0 siblings, 0 replies; 17+ messages in thread
From: Ville Syrjälä @ 2019-09-18 14:59 UTC (permalink / raw)
To: Manasi Navare; +Cc: Leho Kraav, intel-gfx
On Wed, Sep 18, 2019 at 07:28:29AM -0700, Manasi Navare wrote:
> On Thu, Sep 05, 2019 at 04:50:44PM +0300, Ville Syrjala wrote:
> > From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> >
> > Modern platforms allow the transcoders hdisplay/vdisplay to exceed the
> > planes' max resolution. This has the nasty implication that modes on the
> > connectors' mode list may not be usable when the user asks for a
> > fullscreen plane. Seeing as that is the most common use case it seems
> > prudent to filter out modes that don't allow for fullscreen planes to
> > be enabled.
> >
> > Let's do that in the connetor .mode_valid() hook so that normally
> > such modes are kept hidden but the user is still able to forcibly
> > specify such a mode if they know they don't need fullscreen planes.
> >
> > This is in line with ealier policies regarding certain clock limits.
> > The idea is to prevent the casual user from encountering a mode that
> > would fail under typical conditions, but allow the expert user to
> > force things if they so wish.
> >
> > Maybe in the future we should consider automagically using two
> > planes when one can't cover the entire screen? Wouldn't be a
> > great match for the current uapi with explicit planes though,
> > but I guess no worse than using two pipes (which we apparently
> > have to in the future anyway). Either that or we'd have to
> > teach userspace to do it for us.
> >
> > Cc: Leho Kraav <leho@kraav.com>
> > Cc: Sean Paul <sean@poorly.run>
> > Cc: José Roberto de Souza <jose.souza@intel.com>
> > Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > ---
> > drivers/gpu/drm/i915/display/intel_display.c | 31 ++++++++++++++++++++
> > drivers/gpu/drm/i915/display/intel_display.h | 4 +++
> > drivers/gpu/drm/i915/display/intel_dp.c | 2 +-
> > drivers/gpu/drm/i915/display/intel_dsi.c | 3 +-
> > drivers/gpu/drm/i915/display/intel_hdmi.c | 4 ++-
> > 5 files changed, 41 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> > index 4e63342ea597..99466a29bf36 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > @@ -15846,6 +15846,7 @@ intel_mode_valid(struct drm_device *dev,
> > DRM_MODE_FLAG_CLKDIV2))
> > return MODE_BAD;
> >
> > + /* Transcoder timing limits */
> > if (INTEL_GEN(dev_priv) >= 9 ||
> > IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) {
> > hdisplay_max = 8192; /* FDI max 4096 handled elsewhere */
> > @@ -15879,6 +15880,36 @@ intel_mode_valid(struct drm_device *dev,
> > return MODE_OK;
> > }
> >
> > +enum drm_mode_status
> > +intel_mode_valid_max_plane_size(struct drm_i915_private *dev_priv,
> > + const struct drm_display_mode *mode)
> > +{
> > + int plane_width_max, plane_height_max;
> > +
> > + /*
> > + * intel_mode_valid() should be
> > + * sufficient on older platforms.
> > + */
> > + if (INTEL_GEN(dev_priv) < 9)
> > + return MODE_OK;
> > +
> > + /*
> > + * Most people will probably want a fullscreen
> > + * plane so let's not advertize modes that are
> > + * too big for that.
> > + */
> > + plane_width_max = 5120;
> > + plane_height_max = 4096;
>
> For ICL+, shouldnt tthe plane_height_max be 4320?
It should indeed. I wish I could come up with a nice way to not
duplicate this information here. But in order to use the
skl_plane_{width,height}() etc. we'd still need to hardcode the
cpp/modifier information here, so it's not exactly nice either.
Anywas, I'll toss out a v2.
>
> Manasi
>
> > +
> > + if (mode->hdisplay > plane_width_max)
> > + return MODE_H_ILLEGAL;
> > +
> > + if (mode->vdisplay > plane_height_max)
> > + return MODE_V_ILLEGAL;
> > +
> > + return MODE_OK;
> > +}
> > +
> > static const struct drm_mode_config_funcs intel_mode_funcs = {
> > .fb_create = intel_user_framebuffer_create,
> > .get_format_info = intel_get_format_info,
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
> > index 33fd523c4622..ecabb827eb87 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.h
> > +++ b/drivers/gpu/drm/i915/display/intel_display.h
> > @@ -32,6 +32,7 @@ enum link_m_n_set;
> > struct dpll;
> > struct drm_connector;
> > struct drm_device;
> > +struct drm_display_mode;
> > struct drm_encoder;
> > struct drm_file;
> > struct drm_framebuffer;
> > @@ -447,6 +448,9 @@ void lpt_disable_clkout_dp(struct drm_i915_private *dev_priv);
> > u32 intel_plane_fb_max_stride(struct drm_i915_private *dev_priv,
> > u32 pixel_format, u64 modifier);
> > bool intel_plane_can_remap(const struct intel_plane_state *plane_state);
> > +enum drm_mode_status
> > +intel_mode_valid_max_plane_size(struct drm_i915_private *dev_priv,
> > + const struct drm_display_mode *mode);
> > enum phy intel_port_to_phy(struct drm_i915_private *i915, enum port port);
> >
> > void intel_plane_destroy(struct drm_plane *plane);
> > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> > index d09133a958e1..ccaf9f00b747 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> > @@ -562,7 +562,7 @@ intel_dp_mode_valid(struct drm_connector *connector,
> > if (mode->flags & DRM_MODE_FLAG_DBLCLK)
> > return MODE_H_ILLEGAL;
> >
> > - return MODE_OK;
> > + return intel_mode_valid_max_plane_size(dev_priv, mode);
> > }
> >
> > u32 intel_dp_pack_aux(const u8 *src, int src_bytes)
> > diff --git a/drivers/gpu/drm/i915/display/intel_dsi.c b/drivers/gpu/drm/i915/display/intel_dsi.c
> > index 5fec02aceaed..a2a937109a5a 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dsi.c
> > +++ b/drivers/gpu/drm/i915/display/intel_dsi.c
> > @@ -55,6 +55,7 @@ int intel_dsi_get_modes(struct drm_connector *connector)
> > enum drm_mode_status intel_dsi_mode_valid(struct drm_connector *connector,
> > struct drm_display_mode *mode)
> > {
> > + struct drm_i915_private *dev_priv = to_i915(connector->dev);
> > struct intel_connector *intel_connector = to_intel_connector(connector);
> > const struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
> > int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
> > @@ -73,7 +74,7 @@ enum drm_mode_status intel_dsi_mode_valid(struct drm_connector *connector,
> > return MODE_CLOCK_HIGH;
> > }
> >
> > - return MODE_OK;
> > + return intel_mode_valid_max_plane_size(dev_priv, mode);
> > }
> >
> > struct intel_dsi_host *intel_dsi_host_init(struct intel_dsi *intel_dsi,
> > diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
> > index c500fc9154c8..dbc686515dce 100644
> > --- a/drivers/gpu/drm/i915/display/intel_hdmi.c
> > +++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
> > @@ -2188,8 +2188,10 @@ intel_hdmi_mode_valid(struct drm_connector *connector,
> > status = hdmi_port_clock_valid(hdmi, clock * 5 / 4,
> > true, force_dvi);
> > }
> > + if (status != MODE_OK)
> > + return status;
> >
> > - return status;
> > + return intel_mode_valid_max_plane_size(dev_priv, mode);
> > }
> >
> > static bool hdmi_deep_color_possible(const struct intel_crtc_state *crtc_state,
> > --
> > 2.21.0
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH v2 2/2] drm/i915: Don't advertise modes that exceed the max plane size
2019-09-05 13:50 ` [PATCH 2/2] drm/i915: Don't advertise modes that exceed the max plane size Ville Syrjala
2019-09-18 14:08 ` Maarten Lankhorst
2019-09-18 14:28 ` Manasi Navare
@ 2019-09-18 15:07 ` Ville Syrjala
2019-09-18 15:24 ` Sean Paul
2019-09-19 8:52 ` Maarten Lankhorst
2 siblings, 2 replies; 17+ messages in thread
From: Ville Syrjala @ 2019-09-18 15:07 UTC (permalink / raw)
To: intel-gfx; +Cc: Leho Kraav
From: Ville Syrjälä <ville.syrjala@linux.intel.com>
Modern platforms allow the transcoders hdisplay/vdisplay to exceed the
planes' max resolution. This has the nasty implication that modes on the
connectors' mode list may not be usable when the user asks for a
fullscreen plane. Seeing as that is the most common use case it seems
prudent to filter out modes that don't allow for fullscreen planes to
be enabled.
Let's do that in the connetor .mode_valid() hook so that normally
such modes are kept hidden but the user is still able to forcibly
specify such a mode if they know they don't need fullscreen planes.
This is in line with ealier policies regarding certain clock limits.
The idea is to prevent the casual user from encountering a mode that
would fail under typical conditions, but allow the expert user to
force things if they so wish.
Maybe in the future we should consider automagically using two
planes when one can't cover the entire screen? Wouldn't be a
great match for the current uapi with explicit planes though,
but I guess no worse than using two pipes (which we apparently
have to in the future anyway). Either that or we'd have to
teach userspace to do it for us.
v2: Fix icl+ max plane heigth (Manasi)
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Leho Kraav <leho@kraav.com>
Cc: Sean Paul <sean@poorly.run>
Cc: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
---
drivers/gpu/drm/i915/display/intel_display.c | 36 ++++++++++++++++++++
drivers/gpu/drm/i915/display/intel_display.h | 4 +++
drivers/gpu/drm/i915/display/intel_dp.c | 2 +-
drivers/gpu/drm/i915/display/intel_dsi.c | 3 +-
drivers/gpu/drm/i915/display/intel_hdmi.c | 4 ++-
5 files changed, 46 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index f5e65e052d91..0147e4ae3622 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -15753,6 +15753,7 @@ intel_mode_valid(struct drm_device *dev,
DRM_MODE_FLAG_CLKDIV2))
return MODE_BAD;
+ /* Transcoder timing limits */
if (INTEL_GEN(dev_priv) >= 11) {
hdisplay_max = 16384;
vdisplay_max = 8192;
@@ -15791,6 +15792,41 @@ intel_mode_valid(struct drm_device *dev,
return MODE_OK;
}
+enum drm_mode_status
+intel_mode_valid_max_plane_size(struct drm_i915_private *dev_priv,
+ const struct drm_display_mode *mode)
+{
+ int plane_width_max, plane_height_max;
+
+ /*
+ * intel_mode_valid() should be
+ * sufficient on older platforms.
+ */
+ if (INTEL_GEN(dev_priv) < 9)
+ return MODE_OK;
+
+ /*
+ * Most people will probably want a fullscreen
+ * plane so let's not advertize modes that are
+ * too big for that.
+ */
+ if (INTEL_GEN(dev_priv) >= 11) {
+ plane_width_max = 5120;
+ plane_height_max = 4320;
+ } else {
+ plane_width_max = 5120;
+ plane_height_max = 4096;
+ }
+
+ if (mode->hdisplay > plane_width_max)
+ return MODE_H_ILLEGAL;
+
+ if (mode->vdisplay > plane_height_max)
+ return MODE_V_ILLEGAL;
+
+ return MODE_OK;
+}
+
static const struct drm_mode_config_funcs intel_mode_funcs = {
.fb_create = intel_user_framebuffer_create,
.get_format_info = intel_get_format_info,
diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
index 66330fcb10d4..b1ae0e59c715 100644
--- a/drivers/gpu/drm/i915/display/intel_display.h
+++ b/drivers/gpu/drm/i915/display/intel_display.h
@@ -32,6 +32,7 @@ enum link_m_n_set;
struct dpll;
struct drm_connector;
struct drm_device;
+struct drm_display_mode;
struct drm_encoder;
struct drm_file;
struct drm_format_info;
@@ -448,6 +449,9 @@ void lpt_disable_clkout_dp(struct drm_i915_private *dev_priv);
u32 intel_plane_fb_max_stride(struct drm_i915_private *dev_priv,
u32 pixel_format, u64 modifier);
bool intel_plane_can_remap(const struct intel_plane_state *plane_state);
+enum drm_mode_status
+intel_mode_valid_max_plane_size(struct drm_i915_private *dev_priv,
+ const struct drm_display_mode *mode);
enum phy intel_port_to_phy(struct drm_i915_private *i915, enum port port);
void intel_plane_destroy(struct drm_plane *plane);
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index d09133a958e1..ccaf9f00b747 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -562,7 +562,7 @@ intel_dp_mode_valid(struct drm_connector *connector,
if (mode->flags & DRM_MODE_FLAG_DBLCLK)
return MODE_H_ILLEGAL;
- return MODE_OK;
+ return intel_mode_valid_max_plane_size(dev_priv, mode);
}
u32 intel_dp_pack_aux(const u8 *src, int src_bytes)
diff --git a/drivers/gpu/drm/i915/display/intel_dsi.c b/drivers/gpu/drm/i915/display/intel_dsi.c
index 5fec02aceaed..a2a937109a5a 100644
--- a/drivers/gpu/drm/i915/display/intel_dsi.c
+++ b/drivers/gpu/drm/i915/display/intel_dsi.c
@@ -55,6 +55,7 @@ int intel_dsi_get_modes(struct drm_connector *connector)
enum drm_mode_status intel_dsi_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
+ struct drm_i915_private *dev_priv = to_i915(connector->dev);
struct intel_connector *intel_connector = to_intel_connector(connector);
const struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
@@ -73,7 +74,7 @@ enum drm_mode_status intel_dsi_mode_valid(struct drm_connector *connector,
return MODE_CLOCK_HIGH;
}
- return MODE_OK;
+ return intel_mode_valid_max_plane_size(dev_priv, mode);
}
struct intel_dsi_host *intel_dsi_host_init(struct intel_dsi *intel_dsi,
diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
index c500fc9154c8..dbc686515dce 100644
--- a/drivers/gpu/drm/i915/display/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
@@ -2188,8 +2188,10 @@ intel_hdmi_mode_valid(struct drm_connector *connector,
status = hdmi_port_clock_valid(hdmi, clock * 5 / 4,
true, force_dvi);
}
+ if (status != MODE_OK)
+ return status;
- return status;
+ return intel_mode_valid_max_plane_size(dev_priv, mode);
}
static bool hdmi_deep_color_possible(const struct intel_crtc_state *crtc_state,
--
2.21.0
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply related [flat|nested] 17+ messages in thread* Re: [PATCH v2 2/2] drm/i915: Don't advertise modes that exceed the max plane size
2019-09-18 15:07 ` [PATCH v2 " Ville Syrjala
@ 2019-09-18 15:24 ` Sean Paul
2019-09-18 16:02 ` Ville Syrjälä
2019-09-19 8:52 ` Maarten Lankhorst
1 sibling, 1 reply; 17+ messages in thread
From: Sean Paul @ 2019-09-18 15:24 UTC (permalink / raw)
To: Ville Syrjala; +Cc: Leho Kraav, intel-gfx
On Wed, Sep 18, 2019 at 06:07:07PM +0300, Ville Syrjala wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> Modern platforms allow the transcoders hdisplay/vdisplay to exceed the
> planes' max resolution. This has the nasty implication that modes on the
> connectors' mode list may not be usable when the user asks for a
> fullscreen plane. Seeing as that is the most common use case it seems
> prudent to filter out modes that don't allow for fullscreen planes to
> be enabled.
>
> Let's do that in the connetor .mode_valid() hook so that normally
> such modes are kept hidden but the user is still able to forcibly
> specify such a mode if they know they don't need fullscreen planes.
>
> This is in line with ealier policies regarding certain clock limits.
> The idea is to prevent the casual user from encountering a mode that
> would fail under typical conditions, but allow the expert user to
> force things if they so wish.
Isn't this exactly what atomic_check is for? Why not just add a debug message in
get_max_plane_size to leave a breadcrumb?
Sean
>
> Maybe in the future we should consider automagically using two
> planes when one can't cover the entire screen? Wouldn't be a
> great match for the current uapi with explicit planes though,
> but I guess no worse than using two pipes (which we apparently
> have to in the future anyway). Either that or we'd have to
> teach userspace to do it for us.
>
> v2: Fix icl+ max plane heigth (Manasi)
>
> Cc: Manasi Navare <manasi.d.navare@intel.com>
> Cc: Leho Kraav <leho@kraav.com>
> Cc: Sean Paul <sean@poorly.run>
> Cc: José Roberto de Souza <jose.souza@intel.com>
> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 36 ++++++++++++++++++++
> drivers/gpu/drm/i915/display/intel_display.h | 4 +++
> drivers/gpu/drm/i915/display/intel_dp.c | 2 +-
> drivers/gpu/drm/i915/display/intel_dsi.c | 3 +-
> drivers/gpu/drm/i915/display/intel_hdmi.c | 4 ++-
> 5 files changed, 46 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index f5e65e052d91..0147e4ae3622 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -15753,6 +15753,7 @@ intel_mode_valid(struct drm_device *dev,
> DRM_MODE_FLAG_CLKDIV2))
> return MODE_BAD;
>
> + /* Transcoder timing limits */
> if (INTEL_GEN(dev_priv) >= 11) {
> hdisplay_max = 16384;
> vdisplay_max = 8192;
> @@ -15791,6 +15792,41 @@ intel_mode_valid(struct drm_device *dev,
> return MODE_OK;
> }
>
> +enum drm_mode_status
> +intel_mode_valid_max_plane_size(struct drm_i915_private *dev_priv,
> + const struct drm_display_mode *mode)
> +{
> + int plane_width_max, plane_height_max;
> +
> + /*
> + * intel_mode_valid() should be
> + * sufficient on older platforms.
> + */
> + if (INTEL_GEN(dev_priv) < 9)
> + return MODE_OK;
> +
> + /*
> + * Most people will probably want a fullscreen
> + * plane so let's not advertize modes that are
> + * too big for that.
> + */
> + if (INTEL_GEN(dev_priv) >= 11) {
> + plane_width_max = 5120;
> + plane_height_max = 4320;
> + } else {
> + plane_width_max = 5120;
> + plane_height_max = 4096;
> + }
> +
> + if (mode->hdisplay > plane_width_max)
> + return MODE_H_ILLEGAL;
> +
> + if (mode->vdisplay > plane_height_max)
> + return MODE_V_ILLEGAL;
> +
> + return MODE_OK;
> +}
> +
> static const struct drm_mode_config_funcs intel_mode_funcs = {
> .fb_create = intel_user_framebuffer_create,
> .get_format_info = intel_get_format_info,
> diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
> index 66330fcb10d4..b1ae0e59c715 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.h
> +++ b/drivers/gpu/drm/i915/display/intel_display.h
> @@ -32,6 +32,7 @@ enum link_m_n_set;
> struct dpll;
> struct drm_connector;
> struct drm_device;
> +struct drm_display_mode;
> struct drm_encoder;
> struct drm_file;
> struct drm_format_info;
> @@ -448,6 +449,9 @@ void lpt_disable_clkout_dp(struct drm_i915_private *dev_priv);
> u32 intel_plane_fb_max_stride(struct drm_i915_private *dev_priv,
> u32 pixel_format, u64 modifier);
> bool intel_plane_can_remap(const struct intel_plane_state *plane_state);
> +enum drm_mode_status
> +intel_mode_valid_max_plane_size(struct drm_i915_private *dev_priv,
> + const struct drm_display_mode *mode);
> enum phy intel_port_to_phy(struct drm_i915_private *i915, enum port port);
>
> void intel_plane_destroy(struct drm_plane *plane);
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index d09133a958e1..ccaf9f00b747 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -562,7 +562,7 @@ intel_dp_mode_valid(struct drm_connector *connector,
> if (mode->flags & DRM_MODE_FLAG_DBLCLK)
> return MODE_H_ILLEGAL;
>
> - return MODE_OK;
> + return intel_mode_valid_max_plane_size(dev_priv, mode);
> }
>
> u32 intel_dp_pack_aux(const u8 *src, int src_bytes)
> diff --git a/drivers/gpu/drm/i915/display/intel_dsi.c b/drivers/gpu/drm/i915/display/intel_dsi.c
> index 5fec02aceaed..a2a937109a5a 100644
> --- a/drivers/gpu/drm/i915/display/intel_dsi.c
> +++ b/drivers/gpu/drm/i915/display/intel_dsi.c
> @@ -55,6 +55,7 @@ int intel_dsi_get_modes(struct drm_connector *connector)
> enum drm_mode_status intel_dsi_mode_valid(struct drm_connector *connector,
> struct drm_display_mode *mode)
> {
> + struct drm_i915_private *dev_priv = to_i915(connector->dev);
> struct intel_connector *intel_connector = to_intel_connector(connector);
> const struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
> int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
> @@ -73,7 +74,7 @@ enum drm_mode_status intel_dsi_mode_valid(struct drm_connector *connector,
> return MODE_CLOCK_HIGH;
> }
>
> - return MODE_OK;
> + return intel_mode_valid_max_plane_size(dev_priv, mode);
> }
>
> struct intel_dsi_host *intel_dsi_host_init(struct intel_dsi *intel_dsi,
> diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
> index c500fc9154c8..dbc686515dce 100644
> --- a/drivers/gpu/drm/i915/display/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
> @@ -2188,8 +2188,10 @@ intel_hdmi_mode_valid(struct drm_connector *connector,
> status = hdmi_port_clock_valid(hdmi, clock * 5 / 4,
> true, force_dvi);
> }
> + if (status != MODE_OK)
> + return status;
>
> - return status;
> + return intel_mode_valid_max_plane_size(dev_priv, mode);
> }
>
> static bool hdmi_deep_color_possible(const struct intel_crtc_state *crtc_state,
> --
> 2.21.0
>
--
Sean Paul, Software Engineer, Google / Chromium OS
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 17+ messages in thread* Re: [PATCH v2 2/2] drm/i915: Don't advertise modes that exceed the max plane size
2019-09-18 15:24 ` Sean Paul
@ 2019-09-18 16:02 ` Ville Syrjälä
2019-09-18 16:27 ` Manasi Navare
2019-09-18 20:21 ` Sean Paul
0 siblings, 2 replies; 17+ messages in thread
From: Ville Syrjälä @ 2019-09-18 16:02 UTC (permalink / raw)
To: Sean Paul; +Cc: Leho Kraav, intel-gfx
On Wed, Sep 18, 2019 at 11:24:09AM -0400, Sean Paul wrote:
> On Wed, Sep 18, 2019 at 06:07:07PM +0300, Ville Syrjala wrote:
> > From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> >
> > Modern platforms allow the transcoders hdisplay/vdisplay to exceed the
> > planes' max resolution. This has the nasty implication that modes on the
> > connectors' mode list may not be usable when the user asks for a
> > fullscreen plane. Seeing as that is the most common use case it seems
> > prudent to filter out modes that don't allow for fullscreen planes to
> > be enabled.
> >
> > Let's do that in the connetor .mode_valid() hook so that normally
> > such modes are kept hidden but the user is still able to forcibly
> > specify such a mode if they know they don't need fullscreen planes.
> >
> > This is in line with ealier policies regarding certain clock limits.
> > The idea is to prevent the casual user from encountering a mode that
> > would fail under typical conditions, but allow the expert user to
> > force things if they so wish.
>
> Isn't this exactly what atomic_check is for? Why not just add a debug message in
> get_max_plane_size to leave a breadcrumb?
There's already a debug message. Won't really help when the screen fails
to light up automagically on account of the preferred mode being too
big.
>
> Sean
>
> >
> > Maybe in the future we should consider automagically using two
> > planes when one can't cover the entire screen? Wouldn't be a
> > great match for the current uapi with explicit planes though,
> > but I guess no worse than using two pipes (which we apparently
> > have to in the future anyway). Either that or we'd have to
> > teach userspace to do it for us.
> >
> > v2: Fix icl+ max plane heigth (Manasi)
> >
> > Cc: Manasi Navare <manasi.d.navare@intel.com>
> > Cc: Leho Kraav <leho@kraav.com>
> > Cc: Sean Paul <sean@poorly.run>
> > Cc: José Roberto de Souza <jose.souza@intel.com>
> > Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> > Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > ---
> > drivers/gpu/drm/i915/display/intel_display.c | 36 ++++++++++++++++++++
> > drivers/gpu/drm/i915/display/intel_display.h | 4 +++
> > drivers/gpu/drm/i915/display/intel_dp.c | 2 +-
> > drivers/gpu/drm/i915/display/intel_dsi.c | 3 +-
> > drivers/gpu/drm/i915/display/intel_hdmi.c | 4 ++-
> > 5 files changed, 46 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> > index f5e65e052d91..0147e4ae3622 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > @@ -15753,6 +15753,7 @@ intel_mode_valid(struct drm_device *dev,
> > DRM_MODE_FLAG_CLKDIV2))
> > return MODE_BAD;
> >
> > + /* Transcoder timing limits */
> > if (INTEL_GEN(dev_priv) >= 11) {
> > hdisplay_max = 16384;
> > vdisplay_max = 8192;
> > @@ -15791,6 +15792,41 @@ intel_mode_valid(struct drm_device *dev,
> > return MODE_OK;
> > }
> >
> > +enum drm_mode_status
> > +intel_mode_valid_max_plane_size(struct drm_i915_private *dev_priv,
> > + const struct drm_display_mode *mode)
> > +{
> > + int plane_width_max, plane_height_max;
> > +
> > + /*
> > + * intel_mode_valid() should be
> > + * sufficient on older platforms.
> > + */
> > + if (INTEL_GEN(dev_priv) < 9)
> > + return MODE_OK;
> > +
> > + /*
> > + * Most people will probably want a fullscreen
> > + * plane so let's not advertize modes that are
> > + * too big for that.
> > + */
> > + if (INTEL_GEN(dev_priv) >= 11) {
> > + plane_width_max = 5120;
> > + plane_height_max = 4320;
> > + } else {
> > + plane_width_max = 5120;
> > + plane_height_max = 4096;
> > + }
> > +
> > + if (mode->hdisplay > plane_width_max)
> > + return MODE_H_ILLEGAL;
> > +
> > + if (mode->vdisplay > plane_height_max)
> > + return MODE_V_ILLEGAL;
> > +
> > + return MODE_OK;
> > +}
> > +
> > static const struct drm_mode_config_funcs intel_mode_funcs = {
> > .fb_create = intel_user_framebuffer_create,
> > .get_format_info = intel_get_format_info,
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
> > index 66330fcb10d4..b1ae0e59c715 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.h
> > +++ b/drivers/gpu/drm/i915/display/intel_display.h
> > @@ -32,6 +32,7 @@ enum link_m_n_set;
> > struct dpll;
> > struct drm_connector;
> > struct drm_device;
> > +struct drm_display_mode;
> > struct drm_encoder;
> > struct drm_file;
> > struct drm_format_info;
> > @@ -448,6 +449,9 @@ void lpt_disable_clkout_dp(struct drm_i915_private *dev_priv);
> > u32 intel_plane_fb_max_stride(struct drm_i915_private *dev_priv,
> > u32 pixel_format, u64 modifier);
> > bool intel_plane_can_remap(const struct intel_plane_state *plane_state);
> > +enum drm_mode_status
> > +intel_mode_valid_max_plane_size(struct drm_i915_private *dev_priv,
> > + const struct drm_display_mode *mode);
> > enum phy intel_port_to_phy(struct drm_i915_private *i915, enum port port);
> >
> > void intel_plane_destroy(struct drm_plane *plane);
> > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> > index d09133a958e1..ccaf9f00b747 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> > @@ -562,7 +562,7 @@ intel_dp_mode_valid(struct drm_connector *connector,
> > if (mode->flags & DRM_MODE_FLAG_DBLCLK)
> > return MODE_H_ILLEGAL;
> >
> > - return MODE_OK;
> > + return intel_mode_valid_max_plane_size(dev_priv, mode);
> > }
> >
> > u32 intel_dp_pack_aux(const u8 *src, int src_bytes)
> > diff --git a/drivers/gpu/drm/i915/display/intel_dsi.c b/drivers/gpu/drm/i915/display/intel_dsi.c
> > index 5fec02aceaed..a2a937109a5a 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dsi.c
> > +++ b/drivers/gpu/drm/i915/display/intel_dsi.c
> > @@ -55,6 +55,7 @@ int intel_dsi_get_modes(struct drm_connector *connector)
> > enum drm_mode_status intel_dsi_mode_valid(struct drm_connector *connector,
> > struct drm_display_mode *mode)
> > {
> > + struct drm_i915_private *dev_priv = to_i915(connector->dev);
> > struct intel_connector *intel_connector = to_intel_connector(connector);
> > const struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
> > int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
> > @@ -73,7 +74,7 @@ enum drm_mode_status intel_dsi_mode_valid(struct drm_connector *connector,
> > return MODE_CLOCK_HIGH;
> > }
> >
> > - return MODE_OK;
> > + return intel_mode_valid_max_plane_size(dev_priv, mode);
> > }
> >
> > struct intel_dsi_host *intel_dsi_host_init(struct intel_dsi *intel_dsi,
> > diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
> > index c500fc9154c8..dbc686515dce 100644
> > --- a/drivers/gpu/drm/i915/display/intel_hdmi.c
> > +++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
> > @@ -2188,8 +2188,10 @@ intel_hdmi_mode_valid(struct drm_connector *connector,
> > status = hdmi_port_clock_valid(hdmi, clock * 5 / 4,
> > true, force_dvi);
> > }
> > + if (status != MODE_OK)
> > + return status;
> >
> > - return status;
> > + return intel_mode_valid_max_plane_size(dev_priv, mode);
> > }
> >
> > static bool hdmi_deep_color_possible(const struct intel_crtc_state *crtc_state,
> > --
> > 2.21.0
> >
>
> --
> Sean Paul, Software Engineer, Google / Chromium OS
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 17+ messages in thread* Re: [PATCH v2 2/2] drm/i915: Don't advertise modes that exceed the max plane size
2019-09-18 16:02 ` Ville Syrjälä
@ 2019-09-18 16:27 ` Manasi Navare
2019-09-18 20:21 ` Sean Paul
1 sibling, 0 replies; 17+ messages in thread
From: Manasi Navare @ 2019-09-18 16:27 UTC (permalink / raw)
To: Ville Syrjälä; +Cc: Leho Kraav, intel-gfx
On Wed, Sep 18, 2019 at 07:02:18PM +0300, Ville Syrjälä wrote:
> On Wed, Sep 18, 2019 at 11:24:09AM -0400, Sean Paul wrote:
> > On Wed, Sep 18, 2019 at 06:07:07PM +0300, Ville Syrjala wrote:
> > > From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > >
> > > Modern platforms allow the transcoders hdisplay/vdisplay to exceed the
> > > planes' max resolution. This has the nasty implication that modes on the
> > > connectors' mode list may not be usable when the user asks for a
> > > fullscreen plane. Seeing as that is the most common use case it seems
> > > prudent to filter out modes that don't allow for fullscreen planes to
> > > be enabled.
> > >
> > > Let's do that in the connetor .mode_valid() hook so that normally
> > > such modes are kept hidden but the user is still able to forcibly
> > > specify such a mode if they know they don't need fullscreen planes.
> > >
> > > This is in line with ealier policies regarding certain clock limits.
> > > The idea is to prevent the casual user from encountering a mode that
> > > would fail under typical conditions, but allow the expert user to
> > > force things if they so wish.
> >
> > Isn't this exactly what atomic_check is for? Why not just add a debug message in
> > get_max_plane_size to leave a breadcrumb?
>
> There's already a debug message. Won't really help when the screen fails
> to light up automagically on account of the preferred mode being too
> big.
>
> >
> > Sean
> >
> > >
> > > Maybe in the future we should consider automagically using two
> > > planes when one can't cover the entire screen? Wouldn't be a
> > > great match for the current uapi with explicit planes though,
> > > but I guess no worse than using two pipes (which we apparently
> > > have to in the future anyway). Either that or we'd have to
> > > teach userspace to do it for us.
> > >
> > > v2: Fix icl+ max plane heigth (Manasi)
Thanks for this fix, with this
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Manasi
> > >
> > > Cc: Manasi Navare <manasi.d.navare@intel.com>
> > > Cc: Leho Kraav <leho@kraav.com>
> > > Cc: Sean Paul <sean@poorly.run>
> > > Cc: José Roberto de Souza <jose.souza@intel.com>
> > > Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> > > Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > > ---
> > > drivers/gpu/drm/i915/display/intel_display.c | 36 ++++++++++++++++++++
> > > drivers/gpu/drm/i915/display/intel_display.h | 4 +++
> > > drivers/gpu/drm/i915/display/intel_dp.c | 2 +-
> > > drivers/gpu/drm/i915/display/intel_dsi.c | 3 +-
> > > drivers/gpu/drm/i915/display/intel_hdmi.c | 4 ++-
> > > 5 files changed, 46 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> > > index f5e65e052d91..0147e4ae3622 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > > @@ -15753,6 +15753,7 @@ intel_mode_valid(struct drm_device *dev,
> > > DRM_MODE_FLAG_CLKDIV2))
> > > return MODE_BAD;
> > >
> > > + /* Transcoder timing limits */
> > > if (INTEL_GEN(dev_priv) >= 11) {
> > > hdisplay_max = 16384;
> > > vdisplay_max = 8192;
> > > @@ -15791,6 +15792,41 @@ intel_mode_valid(struct drm_device *dev,
> > > return MODE_OK;
> > > }
> > >
> > > +enum drm_mode_status
> > > +intel_mode_valid_max_plane_size(struct drm_i915_private *dev_priv,
> > > + const struct drm_display_mode *mode)
> > > +{
> > > + int plane_width_max, plane_height_max;
> > > +
> > > + /*
> > > + * intel_mode_valid() should be
> > > + * sufficient on older platforms.
> > > + */
> > > + if (INTEL_GEN(dev_priv) < 9)
> > > + return MODE_OK;
> > > +
> > > + /*
> > > + * Most people will probably want a fullscreen
> > > + * plane so let's not advertize modes that are
> > > + * too big for that.
> > > + */
> > > + if (INTEL_GEN(dev_priv) >= 11) {
> > > + plane_width_max = 5120;
> > > + plane_height_max = 4320;
> > > + } else {
> > > + plane_width_max = 5120;
> > > + plane_height_max = 4096;
> > > + }
> > > +
> > > + if (mode->hdisplay > plane_width_max)
> > > + return MODE_H_ILLEGAL;
> > > +
> > > + if (mode->vdisplay > plane_height_max)
> > > + return MODE_V_ILLEGAL;
> > > +
> > > + return MODE_OK;
> > > +}
> > > +
> > > static const struct drm_mode_config_funcs intel_mode_funcs = {
> > > .fb_create = intel_user_framebuffer_create,
> > > .get_format_info = intel_get_format_info,
> > > diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
> > > index 66330fcb10d4..b1ae0e59c715 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_display.h
> > > +++ b/drivers/gpu/drm/i915/display/intel_display.h
> > > @@ -32,6 +32,7 @@ enum link_m_n_set;
> > > struct dpll;
> > > struct drm_connector;
> > > struct drm_device;
> > > +struct drm_display_mode;
> > > struct drm_encoder;
> > > struct drm_file;
> > > struct drm_format_info;
> > > @@ -448,6 +449,9 @@ void lpt_disable_clkout_dp(struct drm_i915_private *dev_priv);
> > > u32 intel_plane_fb_max_stride(struct drm_i915_private *dev_priv,
> > > u32 pixel_format, u64 modifier);
> > > bool intel_plane_can_remap(const struct intel_plane_state *plane_state);
> > > +enum drm_mode_status
> > > +intel_mode_valid_max_plane_size(struct drm_i915_private *dev_priv,
> > > + const struct drm_display_mode *mode);
> > > enum phy intel_port_to_phy(struct drm_i915_private *i915, enum port port);
> > >
> > > void intel_plane_destroy(struct drm_plane *plane);
> > > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> > > index d09133a958e1..ccaf9f00b747 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_dp.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> > > @@ -562,7 +562,7 @@ intel_dp_mode_valid(struct drm_connector *connector,
> > > if (mode->flags & DRM_MODE_FLAG_DBLCLK)
> > > return MODE_H_ILLEGAL;
> > >
> > > - return MODE_OK;
> > > + return intel_mode_valid_max_plane_size(dev_priv, mode);
> > > }
> > >
> > > u32 intel_dp_pack_aux(const u8 *src, int src_bytes)
> > > diff --git a/drivers/gpu/drm/i915/display/intel_dsi.c b/drivers/gpu/drm/i915/display/intel_dsi.c
> > > index 5fec02aceaed..a2a937109a5a 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_dsi.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_dsi.c
> > > @@ -55,6 +55,7 @@ int intel_dsi_get_modes(struct drm_connector *connector)
> > > enum drm_mode_status intel_dsi_mode_valid(struct drm_connector *connector,
> > > struct drm_display_mode *mode)
> > > {
> > > + struct drm_i915_private *dev_priv = to_i915(connector->dev);
> > > struct intel_connector *intel_connector = to_intel_connector(connector);
> > > const struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
> > > int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
> > > @@ -73,7 +74,7 @@ enum drm_mode_status intel_dsi_mode_valid(struct drm_connector *connector,
> > > return MODE_CLOCK_HIGH;
> > > }
> > >
> > > - return MODE_OK;
> > > + return intel_mode_valid_max_plane_size(dev_priv, mode);
> > > }
> > >
> > > struct intel_dsi_host *intel_dsi_host_init(struct intel_dsi *intel_dsi,
> > > diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
> > > index c500fc9154c8..dbc686515dce 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_hdmi.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
> > > @@ -2188,8 +2188,10 @@ intel_hdmi_mode_valid(struct drm_connector *connector,
> > > status = hdmi_port_clock_valid(hdmi, clock * 5 / 4,
> > > true, force_dvi);
> > > }
> > > + if (status != MODE_OK)
> > > + return status;
> > >
> > > - return status;
> > > + return intel_mode_valid_max_plane_size(dev_priv, mode);
> > > }
> > >
> > > static bool hdmi_deep_color_possible(const struct intel_crtc_state *crtc_state,
> > > --
> > > 2.21.0
> > >
> >
> > --
> > Sean Paul, Software Engineer, Google / Chromium OS
>
> --
> Ville Syrjälä
> Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 17+ messages in thread* Re: [PATCH v2 2/2] drm/i915: Don't advertise modes that exceed the max plane size
2019-09-18 16:02 ` Ville Syrjälä
2019-09-18 16:27 ` Manasi Navare
@ 2019-09-18 20:21 ` Sean Paul
2019-09-19 13:10 ` Ville Syrjälä
1 sibling, 1 reply; 17+ messages in thread
From: Sean Paul @ 2019-09-18 20:21 UTC (permalink / raw)
To: Ville Syrjälä; +Cc: Leho Kraav, intel-gfx
On Wed, Sep 18, 2019 at 07:02:18PM +0300, Ville Syrjälä wrote:
> On Wed, Sep 18, 2019 at 11:24:09AM -0400, Sean Paul wrote:
> > On Wed, Sep 18, 2019 at 06:07:07PM +0300, Ville Syrjala wrote:
> > > From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > >
> > > Modern platforms allow the transcoders hdisplay/vdisplay to exceed the
> > > planes' max resolution. This has the nasty implication that modes on the
> > > connectors' mode list may not be usable when the user asks for a
> > > fullscreen plane. Seeing as that is the most common use case it seems
> > > prudent to filter out modes that don't allow for fullscreen planes to
> > > be enabled.
> > >
> > > Let's do that in the connetor .mode_valid() hook so that normally
> > > such modes are kept hidden but the user is still able to forcibly
> > > specify such a mode if they know they don't need fullscreen planes.
> > >
> > > This is in line with ealier policies regarding certain clock limits.
> > > The idea is to prevent the casual user from encountering a mode that
> > > would fail under typical conditions, but allow the expert user to
> > > force things if they so wish.
> >
> > Isn't this exactly what atomic_check is for? Why not just add a debug message in
> > get_max_plane_size to leave a breadcrumb?
>
> There's already a debug message. Won't really help when the screen fails
> to light up automagically on account of the preferred mode being too
> big.
That's not the kernel's fault, why are we working around it at this level? There
are lots of reasons beyond max plane size that can cause a modeset to fail. If
userspace doesn't already have the smarts to fallback to a lower resolution on
modeset failure, we should fix it or just ¯\_(ツ)_/¯
Sean
>
> >
> > Sean
> >
> > >
> > > Maybe in the future we should consider automagically using two
> > > planes when one can't cover the entire screen? Wouldn't be a
> > > great match for the current uapi with explicit planes though,
> > > but I guess no worse than using two pipes (which we apparently
> > > have to in the future anyway). Either that or we'd have to
> > > teach userspace to do it for us.
> > >
> > > v2: Fix icl+ max plane heigth (Manasi)
> > >
> > > Cc: Manasi Navare <manasi.d.navare@intel.com>
> > > Cc: Leho Kraav <leho@kraav.com>
> > > Cc: Sean Paul <sean@poorly.run>
> > > Cc: José Roberto de Souza <jose.souza@intel.com>
> > > Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
> > > Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > > ---
> > > drivers/gpu/drm/i915/display/intel_display.c | 36 ++++++++++++++++++++
> > > drivers/gpu/drm/i915/display/intel_display.h | 4 +++
> > > drivers/gpu/drm/i915/display/intel_dp.c | 2 +-
> > > drivers/gpu/drm/i915/display/intel_dsi.c | 3 +-
> > > drivers/gpu/drm/i915/display/intel_hdmi.c | 4 ++-
> > > 5 files changed, 46 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> > > index f5e65e052d91..0147e4ae3622 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > > @@ -15753,6 +15753,7 @@ intel_mode_valid(struct drm_device *dev,
> > > DRM_MODE_FLAG_CLKDIV2))
> > > return MODE_BAD;
> > >
> > > + /* Transcoder timing limits */
> > > if (INTEL_GEN(dev_priv) >= 11) {
> > > hdisplay_max = 16384;
> > > vdisplay_max = 8192;
> > > @@ -15791,6 +15792,41 @@ intel_mode_valid(struct drm_device *dev,
> > > return MODE_OK;
> > > }
> > >
> > > +enum drm_mode_status
> > > +intel_mode_valid_max_plane_size(struct drm_i915_private *dev_priv,
> > > + const struct drm_display_mode *mode)
> > > +{
> > > + int plane_width_max, plane_height_max;
> > > +
> > > + /*
> > > + * intel_mode_valid() should be
> > > + * sufficient on older platforms.
> > > + */
> > > + if (INTEL_GEN(dev_priv) < 9)
> > > + return MODE_OK;
> > > +
> > > + /*
> > > + * Most people will probably want a fullscreen
> > > + * plane so let's not advertize modes that are
> > > + * too big for that.
> > > + */
> > > + if (INTEL_GEN(dev_priv) >= 11) {
> > > + plane_width_max = 5120;
> > > + plane_height_max = 4320;
> > > + } else {
> > > + plane_width_max = 5120;
> > > + plane_height_max = 4096;
> > > + }
> > > +
> > > + if (mode->hdisplay > plane_width_max)
> > > + return MODE_H_ILLEGAL;
> > > +
> > > + if (mode->vdisplay > plane_height_max)
> > > + return MODE_V_ILLEGAL;
> > > +
> > > + return MODE_OK;
> > > +}
> > > +
> > > static const struct drm_mode_config_funcs intel_mode_funcs = {
> > > .fb_create = intel_user_framebuffer_create,
> > > .get_format_info = intel_get_format_info,
> > > diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
> > > index 66330fcb10d4..b1ae0e59c715 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_display.h
> > > +++ b/drivers/gpu/drm/i915/display/intel_display.h
> > > @@ -32,6 +32,7 @@ enum link_m_n_set;
> > > struct dpll;
> > > struct drm_connector;
> > > struct drm_device;
> > > +struct drm_display_mode;
> > > struct drm_encoder;
> > > struct drm_file;
> > > struct drm_format_info;
> > > @@ -448,6 +449,9 @@ void lpt_disable_clkout_dp(struct drm_i915_private *dev_priv);
> > > u32 intel_plane_fb_max_stride(struct drm_i915_private *dev_priv,
> > > u32 pixel_format, u64 modifier);
> > > bool intel_plane_can_remap(const struct intel_plane_state *plane_state);
> > > +enum drm_mode_status
> > > +intel_mode_valid_max_plane_size(struct drm_i915_private *dev_priv,
> > > + const struct drm_display_mode *mode);
> > > enum phy intel_port_to_phy(struct drm_i915_private *i915, enum port port);
> > >
> > > void intel_plane_destroy(struct drm_plane *plane);
> > > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> > > index d09133a958e1..ccaf9f00b747 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_dp.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> > > @@ -562,7 +562,7 @@ intel_dp_mode_valid(struct drm_connector *connector,
> > > if (mode->flags & DRM_MODE_FLAG_DBLCLK)
> > > return MODE_H_ILLEGAL;
> > >
> > > - return MODE_OK;
> > > + return intel_mode_valid_max_plane_size(dev_priv, mode);
> > > }
> > >
> > > u32 intel_dp_pack_aux(const u8 *src, int src_bytes)
> > > diff --git a/drivers/gpu/drm/i915/display/intel_dsi.c b/drivers/gpu/drm/i915/display/intel_dsi.c
> > > index 5fec02aceaed..a2a937109a5a 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_dsi.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_dsi.c
> > > @@ -55,6 +55,7 @@ int intel_dsi_get_modes(struct drm_connector *connector)
> > > enum drm_mode_status intel_dsi_mode_valid(struct drm_connector *connector,
> > > struct drm_display_mode *mode)
> > > {
> > > + struct drm_i915_private *dev_priv = to_i915(connector->dev);
> > > struct intel_connector *intel_connector = to_intel_connector(connector);
> > > const struct drm_display_mode *fixed_mode = intel_connector->panel.fixed_mode;
> > > int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
> > > @@ -73,7 +74,7 @@ enum drm_mode_status intel_dsi_mode_valid(struct drm_connector *connector,
> > > return MODE_CLOCK_HIGH;
> > > }
> > >
> > > - return MODE_OK;
> > > + return intel_mode_valid_max_plane_size(dev_priv, mode);
> > > }
> > >
> > > struct intel_dsi_host *intel_dsi_host_init(struct intel_dsi *intel_dsi,
> > > diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
> > > index c500fc9154c8..dbc686515dce 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_hdmi.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
> > > @@ -2188,8 +2188,10 @@ intel_hdmi_mode_valid(struct drm_connector *connector,
> > > status = hdmi_port_clock_valid(hdmi, clock * 5 / 4,
> > > true, force_dvi);
> > > }
> > > + if (status != MODE_OK)
> > > + return status;
> > >
> > > - return status;
> > > + return intel_mode_valid_max_plane_size(dev_priv, mode);
> > > }
> > >
> > > static bool hdmi_deep_color_possible(const struct intel_crtc_state *crtc_state,
> > > --
> > > 2.21.0
> > >
> >
> > --
> > Sean Paul, Software Engineer, Google / Chromium OS
>
> --
> Ville Syrjälä
> Intel
--
Sean Paul, Software Engineer, Google / Chromium OS
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 17+ messages in thread* Re: [PATCH v2 2/2] drm/i915: Don't advertise modes that exceed the max plane size
2019-09-18 20:21 ` Sean Paul
@ 2019-09-19 13:10 ` Ville Syrjälä
0 siblings, 0 replies; 17+ messages in thread
From: Ville Syrjälä @ 2019-09-19 13:10 UTC (permalink / raw)
To: Sean Paul; +Cc: Leho Kraav, intel-gfx
On Wed, Sep 18, 2019 at 04:21:06PM -0400, Sean Paul wrote:
> On Wed, Sep 18, 2019 at 07:02:18PM +0300, Ville Syrjälä wrote:
> > On Wed, Sep 18, 2019 at 11:24:09AM -0400, Sean Paul wrote:
> > > On Wed, Sep 18, 2019 at 06:07:07PM +0300, Ville Syrjala wrote:
> > > > From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > > >
> > > > Modern platforms allow the transcoders hdisplay/vdisplay to exceed the
> > > > planes' max resolution. This has the nasty implication that modes on the
> > > > connectors' mode list may not be usable when the user asks for a
> > > > fullscreen plane. Seeing as that is the most common use case it seems
> > > > prudent to filter out modes that don't allow for fullscreen planes to
> > > > be enabled.
> > > >
> > > > Let's do that in the connetor .mode_valid() hook so that normally
> > > > such modes are kept hidden but the user is still able to forcibly
> > > > specify such a mode if they know they don't need fullscreen planes.
> > > >
> > > > This is in line with ealier policies regarding certain clock limits.
> > > > The idea is to prevent the casual user from encountering a mode that
> > > > would fail under typical conditions, but allow the expert user to
> > > > force things if they so wish.
> > >
> > > Isn't this exactly what atomic_check is for? Why not just add a debug message in
> > > get_max_plane_size to leave a breadcrumb?
> >
> > There's already a debug message. Won't really help when the screen fails
> > to light up automagically on account of the preferred mode being too
> > big.
>
> That's not the kernel's fault, why are we working around it at this level? There
> are lots of reasons beyond max plane size that can cause a modeset to fail. If
> userspace doesn't already have the smarts to fallback to a lower resolution on
> modeset failure, we should fix it or just ¯\_(ツ)_/¯
Sure, userspace (and fb_helper) should be smarter about this.
Unfortunately I don't have a time machine to deploy such a backport
so this is the best I can do for current userspace.
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v2 2/2] drm/i915: Don't advertise modes that exceed the max plane size
2019-09-18 15:07 ` [PATCH v2 " Ville Syrjala
2019-09-18 15:24 ` Sean Paul
@ 2019-09-19 8:52 ` Maarten Lankhorst
1 sibling, 0 replies; 17+ messages in thread
From: Maarten Lankhorst @ 2019-09-19 8:52 UTC (permalink / raw)
To: Ville Syrjala, intel-gfx; +Cc: Leho Kraav
Op 18-09-2019 om 17:07 schreef Ville Syrjala:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> Modern platforms allow the transcoders hdisplay/vdisplay to exceed the
> planes' max resolution. This has the nasty implication that modes on the
> connectors' mode list may not be usable when the user asks for a
> fullscreen plane. Seeing as that is the most common use case it seems
> prudent to filter out modes that don't allow for fullscreen planes to
> be enabled.
>
> Let's do that in the connetor .mode_valid() hook so that normally
> such modes are kept hidden but the user is still able to forcibly
> specify such a mode if they know they don't need fullscreen planes.
>
> This is in line with ealier policies regarding certain clock limits.
> The idea is to prevent the casual user from encountering a mode that
> would fail under typical conditions, but allow the expert user to
> force things if they so wish.
>
> Maybe in the future we should consider automagically using two
> planes when one can't cover the entire screen? Wouldn't be a
> great match for the current uapi with explicit planes though,
> but I guess no worse than using two pipes (which we apparently
> have to in the future anyway). Either that or we'd have to
> teach userspace to do it for us.
In theory this is what bigjoiner is doing, except the planes are on a different pipe.
Will be fun with SDR vs HDR planes though..
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 17+ messages in thread