All of lore.kernel.org
 help / color / mirror / Atom feed
From: Roger Lu <roger.lu@mediatek.com>
To: Kevin Hilman <khilman@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Nicolas Boichat <drinkcat@google.com>,
	Stephen Boyd <sboyd@kernel.org>
Cc: Fan Chen <fan.chen@mediatek.com>,
	HenryC Chen <HenryC.Chen@mediatek.com>, <yt.lee@mediatek.com>,
	Angus Lin <Angus.Lin@mediatek.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Nishanth Menon <nm@ti.com>, Roger Lu <roger.lu@mediatek.com>,
	<devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <linux-pm@vger.kernel.org>
Subject: [PATCH v5 1/3] dt-bindings: soc: add mtk svs dt-bindings
Date: Fri, 6 Sep 2019 18:05:13 +0800	[thread overview]
Message-ID: <20190906100514.30803-2-roger.lu@mediatek.com> (raw)
In-Reply-To: <20190906100514.30803-1-roger.lu@mediatek.com>

Document the binding for enabling mtk svs on MediaTek SoC.

Signed-off-by: Roger Lu <roger.lu@mediatek.com>
---
 .../devicetree/bindings/power/mtk-svs.txt     | 88 +++++++++++++++++++
 1 file changed, 88 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/mtk-svs.txt

diff --git a/Documentation/devicetree/bindings/power/mtk-svs.txt b/Documentation/devicetree/bindings/power/mtk-svs.txt
new file mode 100644
index 000000000000..6a71992ef162
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/mtk-svs.txt
@@ -0,0 +1,88 @@
+* Mediatek Smart Voltage Scaling (MTK SVS)
+
+This describes the device tree binding for the MTK SVS controller (bank)
+which helps provide the optimized CPU/GPU/CCI voltages. This device also
+needs thermal data to calculate thermal slope for accurately compensate
+the voltages when temperature change.
+
+Required properties:
+- compatible:
+  - "mediatek,mt8183-svs" : For MT8183 family of SoCs
+- reg: Address range of the MTK SVS controller.
+- interrupts: IRQ for the MTK SVS controller.
+- clocks, clock-names: Clocks needed for the svs controller. required
+                       clocks are:
+		       "main_clk": Main clock needed for register access
+- nvmem-cells: Phandle to the calibration data provided by a nvmem device.
+- nvmem-cell-names: Should be "svs-calibration-data" and "calibration-data"
+
+Subnodes:
+- svs_cpu_little: SVS bank device node of little CPU
+  compatible: "mediatek,mt8183-svs-cpu-little"
+  operating-points-v2: OPP table hooked by SVS little CPU bank.
+		       SVS will optimze this OPP table voltage part.
+  vcpu-little-supply: PMIC buck of little CPU
+- svs_cpu_big: SVS bank device node of big CPU
+  compatible: "mediatek,mt8183-svs-cpu-big"
+  operating-points-v2: OPP table hooked by SVS big CPU bank.
+		       SVS will optimze this OPP table voltage part.
+  vcpu-big-supply: PMIC buck of big CPU
+- svs_cci: SVS bank device node of CCI
+  compatible: "mediatek,mt8183-svs-cci"
+  operating-points-v2: OPP table hooked by SVS CCI bank.
+		       SVS will optimze this OPP table voltage part.
+  vcci-supply: PMIC buck of CCI
+- svs_gpu: SVS bank device node of GPU
+  compatible: "mediatek,mt8183-svs-gpu"
+  operating-points-v2: OPP table hooked by SVS GPU bank.
+		       SVS will optimze this OPP table voltage part.
+  vgpu-spply: PMIC buck of GPU
+
+Example:
+
+	svs: svs@1100b000 {
+		compatible = "mediatek,mt8183-svs";
+		reg = <0 0x1100b000 0 0x1000>;
+		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW 0>;
+		clocks = <&infracfg CLK_INFRA_THERM>;
+		clock-names = "main_clk";
+		nvmem-cells = <&svs_calibration>, <&thermal_calibration>;
+		nvmem-cell-names = "svs-calibration-data", "calibration-data";
+
+		svs_cpu_little: svs_cpu_little {
+			compatible = "mediatek,mt8183-svs-cpu-little";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		svs_cpu_big: svs_cpu_big {
+			compatible = "mediatek,mt8183-svs-cpu-big";
+			operating-points-v2 = <&cluster1_opp>;
+		};
+
+		svs_cci: svs_cci {
+			compatible = "mediatek,mt8183-svs-cci";
+			operating-points-v2 = <&cci_opp>;
+		};
+
+		svs_gpu: svs_gpu {
+			compatible = "mediatek,mt8183-svs-gpu";
+			power-domains = <&scpsys MT8183_POWER_DOMAIN_MFG_2D>;
+			operating-points-v2 = <&gpu_opp_table>;
+		};
+	};
+
+	&svs_cpu_little {
+		vcpu-little-supply = <&mt6358_vproc12_reg>;
+	};
+
+	&svs_cpu_big {
+		vcpu-big-supply = <&mt6358_vproc11_reg>;
+	};
+
+	&svs_cci {
+		vcci-supply = <&mt6358_vproc12_reg>;
+	};
+
+	&svs_gpu {
+		vgpu-spply = <&mt6358_vgpu_reg>;
+	};
-- 
2.18.0


WARNING: multiple messages have this Message-ID (diff)
From: Roger Lu <roger.lu@mediatek.com>
To: Kevin Hilman <khilman@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Nicolas Boichat <drinkcat@google.com>,
	Stephen Boyd <sboyd@kernel.org>
Cc: Fan Chen <fan.chen@mediatek.com>,
	HenryC Chen <HenryC.Chen@mediatek.com>,
	yt.lee@mediatek.com, Angus Lin <Angus.Lin@mediatek.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Nishanth Menon <nm@ti.com>, Roger Lu <roger.lu@mediatek.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org,
	linux-pm@vger.kernel.org
Subject: [PATCH v5 1/3] dt-bindings: soc: add mtk svs dt-bindings
Date: Fri, 6 Sep 2019 18:05:13 +0800	[thread overview]
Message-ID: <20190906100514.30803-2-roger.lu@mediatek.com> (raw)
In-Reply-To: <20190906100514.30803-1-roger.lu@mediatek.com>

Document the binding for enabling mtk svs on MediaTek SoC.

Signed-off-by: Roger Lu <roger.lu@mediatek.com>
---
 .../devicetree/bindings/power/mtk-svs.txt     | 88 +++++++++++++++++++
 1 file changed, 88 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/mtk-svs.txt

diff --git a/Documentation/devicetree/bindings/power/mtk-svs.txt b/Documentation/devicetree/bindings/power/mtk-svs.txt
new file mode 100644
index 000000000000..6a71992ef162
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/mtk-svs.txt
@@ -0,0 +1,88 @@
+* Mediatek Smart Voltage Scaling (MTK SVS)
+
+This describes the device tree binding for the MTK SVS controller (bank)
+which helps provide the optimized CPU/GPU/CCI voltages. This device also
+needs thermal data to calculate thermal slope for accurately compensate
+the voltages when temperature change.
+
+Required properties:
+- compatible:
+  - "mediatek,mt8183-svs" : For MT8183 family of SoCs
+- reg: Address range of the MTK SVS controller.
+- interrupts: IRQ for the MTK SVS controller.
+- clocks, clock-names: Clocks needed for the svs controller. required
+                       clocks are:
+		       "main_clk": Main clock needed for register access
+- nvmem-cells: Phandle to the calibration data provided by a nvmem device.
+- nvmem-cell-names: Should be "svs-calibration-data" and "calibration-data"
+
+Subnodes:
+- svs_cpu_little: SVS bank device node of little CPU
+  compatible: "mediatek,mt8183-svs-cpu-little"
+  operating-points-v2: OPP table hooked by SVS little CPU bank.
+		       SVS will optimze this OPP table voltage part.
+  vcpu-little-supply: PMIC buck of little CPU
+- svs_cpu_big: SVS bank device node of big CPU
+  compatible: "mediatek,mt8183-svs-cpu-big"
+  operating-points-v2: OPP table hooked by SVS big CPU bank.
+		       SVS will optimze this OPP table voltage part.
+  vcpu-big-supply: PMIC buck of big CPU
+- svs_cci: SVS bank device node of CCI
+  compatible: "mediatek,mt8183-svs-cci"
+  operating-points-v2: OPP table hooked by SVS CCI bank.
+		       SVS will optimze this OPP table voltage part.
+  vcci-supply: PMIC buck of CCI
+- svs_gpu: SVS bank device node of GPU
+  compatible: "mediatek,mt8183-svs-gpu"
+  operating-points-v2: OPP table hooked by SVS GPU bank.
+		       SVS will optimze this OPP table voltage part.
+  vgpu-spply: PMIC buck of GPU
+
+Example:
+
+	svs: svs@1100b000 {
+		compatible = "mediatek,mt8183-svs";
+		reg = <0 0x1100b000 0 0x1000>;
+		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW 0>;
+		clocks = <&infracfg CLK_INFRA_THERM>;
+		clock-names = "main_clk";
+		nvmem-cells = <&svs_calibration>, <&thermal_calibration>;
+		nvmem-cell-names = "svs-calibration-data", "calibration-data";
+
+		svs_cpu_little: svs_cpu_little {
+			compatible = "mediatek,mt8183-svs-cpu-little";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		svs_cpu_big: svs_cpu_big {
+			compatible = "mediatek,mt8183-svs-cpu-big";
+			operating-points-v2 = <&cluster1_opp>;
+		};
+
+		svs_cci: svs_cci {
+			compatible = "mediatek,mt8183-svs-cci";
+			operating-points-v2 = <&cci_opp>;
+		};
+
+		svs_gpu: svs_gpu {
+			compatible = "mediatek,mt8183-svs-gpu";
+			power-domains = <&scpsys MT8183_POWER_DOMAIN_MFG_2D>;
+			operating-points-v2 = <&gpu_opp_table>;
+		};
+	};
+
+	&svs_cpu_little {
+		vcpu-little-supply = <&mt6358_vproc12_reg>;
+	};
+
+	&svs_cpu_big {
+		vcpu-big-supply = <&mt6358_vproc11_reg>;
+	};
+
+	&svs_cci {
+		vcci-supply = <&mt6358_vproc12_reg>;
+	};
+
+	&svs_gpu {
+		vgpu-spply = <&mt6358_vgpu_reg>;
+	};
-- 
2.18.0

WARNING: multiple messages have this Message-ID (diff)
From: Roger Lu <roger.lu@mediatek.com>
To: Kevin Hilman <khilman@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Nicolas Boichat <drinkcat@google.com>,
	Stephen Boyd <sboyd@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>, Nishanth Menon <nm@ti.com>,
	Angus Lin <Angus.Lin@mediatek.com>,
	devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
	Roger Lu <roger.lu@mediatek.com>,
	linux-kernel@vger.kernel.org,
	HenryC Chen <HenryC.Chen@mediatek.com>,
	yt.lee@mediatek.com, Fan Chen <fan.chen@mediatek.com>,
	linux-mediatek@lists.infradead.org,
	Matthias Brugger <matthias.bgg@gmail.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 1/3] dt-bindings: soc: add mtk svs dt-bindings
Date: Fri, 6 Sep 2019 18:05:13 +0800	[thread overview]
Message-ID: <20190906100514.30803-2-roger.lu@mediatek.com> (raw)
In-Reply-To: <20190906100514.30803-1-roger.lu@mediatek.com>

Document the binding for enabling mtk svs on MediaTek SoC.

Signed-off-by: Roger Lu <roger.lu@mediatek.com>
---
 .../devicetree/bindings/power/mtk-svs.txt     | 88 +++++++++++++++++++
 1 file changed, 88 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/mtk-svs.txt

diff --git a/Documentation/devicetree/bindings/power/mtk-svs.txt b/Documentation/devicetree/bindings/power/mtk-svs.txt
new file mode 100644
index 000000000000..6a71992ef162
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/mtk-svs.txt
@@ -0,0 +1,88 @@
+* Mediatek Smart Voltage Scaling (MTK SVS)
+
+This describes the device tree binding for the MTK SVS controller (bank)
+which helps provide the optimized CPU/GPU/CCI voltages. This device also
+needs thermal data to calculate thermal slope for accurately compensate
+the voltages when temperature change.
+
+Required properties:
+- compatible:
+  - "mediatek,mt8183-svs" : For MT8183 family of SoCs
+- reg: Address range of the MTK SVS controller.
+- interrupts: IRQ for the MTK SVS controller.
+- clocks, clock-names: Clocks needed for the svs controller. required
+                       clocks are:
+		       "main_clk": Main clock needed for register access
+- nvmem-cells: Phandle to the calibration data provided by a nvmem device.
+- nvmem-cell-names: Should be "svs-calibration-data" and "calibration-data"
+
+Subnodes:
+- svs_cpu_little: SVS bank device node of little CPU
+  compatible: "mediatek,mt8183-svs-cpu-little"
+  operating-points-v2: OPP table hooked by SVS little CPU bank.
+		       SVS will optimze this OPP table voltage part.
+  vcpu-little-supply: PMIC buck of little CPU
+- svs_cpu_big: SVS bank device node of big CPU
+  compatible: "mediatek,mt8183-svs-cpu-big"
+  operating-points-v2: OPP table hooked by SVS big CPU bank.
+		       SVS will optimze this OPP table voltage part.
+  vcpu-big-supply: PMIC buck of big CPU
+- svs_cci: SVS bank device node of CCI
+  compatible: "mediatek,mt8183-svs-cci"
+  operating-points-v2: OPP table hooked by SVS CCI bank.
+		       SVS will optimze this OPP table voltage part.
+  vcci-supply: PMIC buck of CCI
+- svs_gpu: SVS bank device node of GPU
+  compatible: "mediatek,mt8183-svs-gpu"
+  operating-points-v2: OPP table hooked by SVS GPU bank.
+		       SVS will optimze this OPP table voltage part.
+  vgpu-spply: PMIC buck of GPU
+
+Example:
+
+	svs: svs@1100b000 {
+		compatible = "mediatek,mt8183-svs";
+		reg = <0 0x1100b000 0 0x1000>;
+		interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW 0>;
+		clocks = <&infracfg CLK_INFRA_THERM>;
+		clock-names = "main_clk";
+		nvmem-cells = <&svs_calibration>, <&thermal_calibration>;
+		nvmem-cell-names = "svs-calibration-data", "calibration-data";
+
+		svs_cpu_little: svs_cpu_little {
+			compatible = "mediatek,mt8183-svs-cpu-little";
+			operating-points-v2 = <&cluster0_opp>;
+		};
+
+		svs_cpu_big: svs_cpu_big {
+			compatible = "mediatek,mt8183-svs-cpu-big";
+			operating-points-v2 = <&cluster1_opp>;
+		};
+
+		svs_cci: svs_cci {
+			compatible = "mediatek,mt8183-svs-cci";
+			operating-points-v2 = <&cci_opp>;
+		};
+
+		svs_gpu: svs_gpu {
+			compatible = "mediatek,mt8183-svs-gpu";
+			power-domains = <&scpsys MT8183_POWER_DOMAIN_MFG_2D>;
+			operating-points-v2 = <&gpu_opp_table>;
+		};
+	};
+
+	&svs_cpu_little {
+		vcpu-little-supply = <&mt6358_vproc12_reg>;
+	};
+
+	&svs_cpu_big {
+		vcpu-big-supply = <&mt6358_vproc11_reg>;
+	};
+
+	&svs_cci {
+		vcci-supply = <&mt6358_vproc12_reg>;
+	};
+
+	&svs_gpu {
+		vgpu-spply = <&mt6358_vgpu_reg>;
+	};
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2019-09-06 10:05 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-06 10:05 [PATCH v5 0/3] PM / AVS: SVS: Introduce SVS engine Roger Lu
2019-09-06 10:05 ` Roger Lu
2019-09-06 10:05 ` Roger Lu
2019-09-06 10:05 ` Roger Lu [this message]
2019-09-06 10:05   ` [PATCH v5 1/3] dt-bindings: soc: add mtk svs dt-bindings Roger Lu
2019-09-06 10:05   ` Roger Lu
2019-09-30 13:35   ` Rob Herring
2019-09-30 13:35     ` Rob Herring
2019-12-27  6:50     ` Roger Lu
2019-12-27  6:50       ` Roger Lu
2019-12-27  6:50       ` Roger Lu
2020-01-13  7:02       ` Nicolas Boichat
2020-01-13  7:02         ` Nicolas Boichat
2020-01-13  7:02         ` Nicolas Boichat
2019-09-06 10:05 ` [PATCH v5 2/3] arm64: dts: mt8183: add svs device information Roger Lu
2019-09-06 10:05   ` Roger Lu
2019-09-06 10:05   ` Roger Lu
2019-09-06 10:05 ` [PATCH v5 3/3] PM / AVS: SVS: Introduce SVS engine Roger Lu
2019-09-06 10:05   ` Roger Lu
2019-09-06 10:05   ` Roger Lu
2019-09-26 22:39   ` Kevin Hilman
2019-09-26 22:39     ` Kevin Hilman
2019-09-26 22:39     ` Kevin Hilman
2020-01-03  5:44     ` Roger Lu
2020-01-03  5:44       ` Roger Lu
2020-01-03  5:44       ` Roger Lu
2019-10-21  7:51   ` Pi-Hsun Shih
2019-10-21  7:51     ` Pi-Hsun Shih
2019-10-21  7:51     ` Pi-Hsun Shih
2019-11-01  6:10     ` Roger Lu
2019-11-01  6:10       ` Roger Lu
2019-11-01  6:10       ` Roger Lu
2019-11-14  7:41   ` Pi-Hsun Shih
2019-11-14  7:41     ` Pi-Hsun Shih
2019-11-14  7:41     ` Pi-Hsun Shih
2019-12-27  7:14     ` Roger Lu
2019-12-27  7:14       ` Roger Lu
2019-12-27  7:14       ` Roger Lu
2019-09-06 10:15 ` [PATCH v5 0/3] " Roger Lu
2019-09-06 10:15   ` Roger Lu
2019-09-06 10:15   ` Roger Lu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190906100514.30803-2-roger.lu@mediatek.com \
    --to=roger.lu@mediatek.com \
    --cc=Angus.Lin@mediatek.com \
    --cc=HenryC.Chen@mediatek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=drinkcat@google.com \
    --cc=fan.chen@mediatek.com \
    --cc=khilman@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=matthias.bgg@gmail.com \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=yt.lee@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.