All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCHv3-next 0/3] Odroid c2 missing regulator linking
@ 2019-09-06 12:32 ` Anand Moon
  0 siblings, 0 replies; 18+ messages in thread
From: Anand Moon @ 2019-09-06 12:32 UTC (permalink / raw)
  To: Rob Herring, Martin Blumenstingl, Jerome Brunet, Neil Armstrong,
	Kevin Hilman
  Cc: devicetree, linux-arm-kernel, linux-amlogic, linux-kernel

Below small changes help re-configure or fix missing inter linking
of regulator node.

Re-based on linux-next-20190904
Changes from previous patch's series.
Build using Cross Compiler.

Added missing Reviewed-by Neil's and Martin.
Added few suggestion from martin for rename of node.

Dependencies:
Changes based top on my previous usb fix series patch's.

[0] https://patchwork.kernel.org/patch/11113095/
[1] https://patchwork.kernel.org/patch/11113099/
[3] https://patchwork.kernel.org/patch/11113103/

Hope this series get picked up for 5.4-rc1, finger crossed.

Changes for previous changes.
Fix some typo.
Updated few patches as per Martin's suggestion.

I will try to commit less mistake in the future.

Best Regards
-Anand

Anand Moon (3):
  arm64: dts: meson: odroid-c2: Add missing regulator linked to P5V0
    regulator
  arm64: dts: meson: odroid-c2: Add missing regulator linked to
    VDDIO_AO3V3 regulator
  arm64: dts: meson: odroid-c2: Add missing regulator linked to HDMI
    supply

 .../boot/dts/amlogic/meson-gxbb-odroidc2.dts  | 53 +++++++++++++++++--
 1 file changed, 50 insertions(+), 3 deletions(-)

-- 
2.23.0


^ permalink raw reply	[flat|nested] 18+ messages in thread
* [PATCHv3-next 0/3] Odroid c2 missing regulator linking
@ 2019-09-06 12:32 ` Anand Moon
  0 siblings, 0 replies; 18+ messages in thread
From: Anand Moon @ 2019-09-06 12:32 UTC (permalink / raw)
  To: Rob Herring, Martin Blumenstingl, Jerome Brunet, Neil Armstrong,
	Kevin Hilman
  Cc: devicetree, linux-kernel, linux-arm-kernel, linux-amlogic

Below small changes help re-configure or fix missing inter linking
of regulator node.

Re-based on linux-next-20190904
Changes from previous patch's series.
Build using Cross Compiler.

Added missing Reviewed-by Neil's and Martin.
Added few suggestion from martin for rename of node.

Dependencies:
Changes based top on my previous usb fix series patch's.

[0] https://patchwork.kernel.org/patch/11113095/
[1] https://patchwork.kernel.org/patch/11113099/
[3] https://patchwork.kernel.org/patch/11113103/

Hope this series get picked up for 5.4-rc1, finger crossed.

Changes for previous changes.
Fix some typo.
Updated few patches as per Martin's suggestion.

I will try to commit less mistake in the future.

Best Regards
-Anand

Anand Moon (3):
  arm64: dts: meson: odroid-c2: Add missing regulator linked to P5V0
    regulator
  arm64: dts: meson: odroid-c2: Add missing regulator linked to
    VDDIO_AO3V3 regulator
  arm64: dts: meson: odroid-c2: Add missing regulator linked to HDMI
    supply

 .../boot/dts/amlogic/meson-gxbb-odroidc2.dts  | 53 +++++++++++++++++--
 1 file changed, 50 insertions(+), 3 deletions(-)

-- 
2.23.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 18+ messages in thread
* [PATCHv3-next 0/3] Odroid c2 missing regulator linking
@ 2019-09-06 12:32 ` Anand Moon
  0 siblings, 0 replies; 18+ messages in thread
From: Anand Moon @ 2019-09-06 12:32 UTC (permalink / raw)
  To: Rob Herring, Martin Blumenstingl, Jerome Brunet, Neil Armstrong,
	Kevin Hilman
  Cc: devicetree, linux-kernel, linux-arm-kernel, linux-amlogic

Below small changes help re-configure or fix missing inter linking
of regulator node.

Re-based on linux-next-20190904
Changes from previous patch's series.
Build using Cross Compiler.

Added missing Reviewed-by Neil's and Martin.
Added few suggestion from martin for rename of node.

Dependencies:
Changes based top on my previous usb fix series patch's.

[0] https://patchwork.kernel.org/patch/11113095/
[1] https://patchwork.kernel.org/patch/11113099/
[3] https://patchwork.kernel.org/patch/11113103/

Hope this series get picked up for 5.4-rc1, finger crossed.

Changes for previous changes.
Fix some typo.
Updated few patches as per Martin's suggestion.

I will try to commit less mistake in the future.

Best Regards
-Anand

Anand Moon (3):
  arm64: dts: meson: odroid-c2: Add missing regulator linked to P5V0
    regulator
  arm64: dts: meson: odroid-c2: Add missing regulator linked to
    VDDIO_AO3V3 regulator
  arm64: dts: meson: odroid-c2: Add missing regulator linked to HDMI
    supply

 .../boot/dts/amlogic/meson-gxbb-odroidc2.dts  | 53 +++++++++++++++++--
 1 file changed, 50 insertions(+), 3 deletions(-)

-- 
2.23.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 18+ messages in thread
* [PATCHv3-next 1/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to P5V0 regulator
  2019-09-06 12:32 ` Anand Moon
  (?)
@ 2019-09-06 12:32   ` Anand Moon
  -1 siblings, 0 replies; 18+ messages in thread
From: Anand Moon @ 2019-09-06 12:32 UTC (permalink / raw)
  To: Rob Herring, Martin Blumenstingl, Jerome Brunet, Neil Armstrong,
	Kevin Hilman
  Cc: devicetree, linux-arm-kernel, linux-amlogic, linux-kernel

As per schematics VDDIO_AO18, VDDIO_AO3V3/VDD3V3 DDR3_1V5/DDR_VDDC:
fixed regulator output which is supplied by P5V0.

Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
Changes from previous.
patchv1.
- drop the rename and linking vcc3v3 regulator node.
- fix the typo spelling.
patchv2.
- change the vddc_ddr node name to ddr3_1v5 as per Martin's suggestion
- Added Matrin's and Neil's Reviewed-by.
---
---
 .../boot/dts/amlogic/meson-gxbb-odroidc2.dts  | 30 +++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 3e51f0835c8d..9ea336c33d00 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -111,6 +111,36 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
+	vddio_ao1v8: regulator-vddio-ao1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		/* U17 RT9179GB */
+		vin-supply = <&p5v0>;
+	};
+
+	vddio_ao3v3: regulator-vddio-ao3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		/* U11 MP2161GJ-C499 */
+		vin-supply = <&p5v0>;
+	};
+
+	ddr3_1v5: regulator-ddr3_1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "DDR3_1V5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		/* U15 MP2161GJ-C499 */
+		vin-supply = <&p5v0>;
+	};
+
 	emmc_pwrseq: emmc-pwrseq {
 		compatible = "mmc-pwrseq-emmc";
 		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
-- 
2.23.0


^ permalink raw reply related	[flat|nested] 18+ messages in thread
* [PATCHv3-next 1/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to P5V0 regulator
@ 2019-09-06 12:32   ` Anand Moon
  0 siblings, 0 replies; 18+ messages in thread
From: Anand Moon @ 2019-09-06 12:32 UTC (permalink / raw)
  To: Rob Herring, Martin Blumenstingl, Jerome Brunet, Neil Armstrong,
	Kevin Hilman
  Cc: devicetree, linux-kernel, linux-arm-kernel, linux-amlogic

As per schematics VDDIO_AO18, VDDIO_AO3V3/VDD3V3 DDR3_1V5/DDR_VDDC:
fixed regulator output which is supplied by P5V0.

Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
Changes from previous.
patchv1.
- drop the rename and linking vcc3v3 regulator node.
- fix the typo spelling.
patchv2.
- change the vddc_ddr node name to ddr3_1v5 as per Martin's suggestion
- Added Matrin's and Neil's Reviewed-by.
---
---
 .../boot/dts/amlogic/meson-gxbb-odroidc2.dts  | 30 +++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 3e51f0835c8d..9ea336c33d00 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -111,6 +111,36 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
+	vddio_ao1v8: regulator-vddio-ao1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		/* U17 RT9179GB */
+		vin-supply = <&p5v0>;
+	};
+
+	vddio_ao3v3: regulator-vddio-ao3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		/* U11 MP2161GJ-C499 */
+		vin-supply = <&p5v0>;
+	};
+
+	ddr3_1v5: regulator-ddr3_1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "DDR3_1V5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		/* U15 MP2161GJ-C499 */
+		vin-supply = <&p5v0>;
+	};
+
 	emmc_pwrseq: emmc-pwrseq {
 		compatible = "mmc-pwrseq-emmc";
 		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
-- 
2.23.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 18+ messages in thread
* [PATCHv3-next 1/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to P5V0 regulator
@ 2019-09-06 12:32   ` Anand Moon
  0 siblings, 0 replies; 18+ messages in thread
From: Anand Moon @ 2019-09-06 12:32 UTC (permalink / raw)
  To: Rob Herring, Martin Blumenstingl, Jerome Brunet, Neil Armstrong,
	Kevin Hilman
  Cc: devicetree, linux-kernel, linux-arm-kernel, linux-amlogic

As per schematics VDDIO_AO18, VDDIO_AO3V3/VDD3V3 DDR3_1V5/DDR_VDDC:
fixed regulator output which is supplied by P5V0.

Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
Changes from previous.
patchv1.
- drop the rename and linking vcc3v3 regulator node.
- fix the typo spelling.
patchv2.
- change the vddc_ddr node name to ddr3_1v5 as per Martin's suggestion
- Added Matrin's and Neil's Reviewed-by.
---
---
 .../boot/dts/amlogic/meson-gxbb-odroidc2.dts  | 30 +++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 3e51f0835c8d..9ea336c33d00 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -111,6 +111,36 @@
 		regulator-max-microvolt = <3300000>;
 	};
 
+	vddio_ao1v8: regulator-vddio-ao1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		/* U17 RT9179GB */
+		vin-supply = <&p5v0>;
+	};
+
+	vddio_ao3v3: regulator-vddio-ao3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		/* U11 MP2161GJ-C499 */
+		vin-supply = <&p5v0>;
+	};
+
+	ddr3_1v5: regulator-ddr3_1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "DDR3_1V5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		/* U15 MP2161GJ-C499 */
+		vin-supply = <&p5v0>;
+	};
+
 	emmc_pwrseq: emmc-pwrseq {
 		compatible = "mmc-pwrseq-emmc";
 		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
-- 
2.23.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply related	[flat|nested] 18+ messages in thread
* [PATCHv3-next 2/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to VDDIO_AO3V3 regulator
  2019-09-06 12:32 ` Anand Moon
  (?)
@ 2019-09-06 12:32   ` Anand Moon
  -1 siblings, 0 replies; 18+ messages in thread
From: Anand Moon @ 2019-09-06 12:32 UTC (permalink / raw)
  To: Rob Herring, Martin Blumenstingl, Jerome Brunet, Neil Armstrong,
	Kevin Hilman
  Cc: devicetree, linux-arm-kernel, linux-amlogic, linux-kernel

As per schematics TFLASH_VDD, TF_IO, VCC3V3 fixed regulator output which
is supplied by VDDIO_AO3V3.

While here, move the comment name with the signal name in the
schematics above the gpio property to make it consistent with other
regulators.

Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
changes from previous.
Patchv1
- Fix the typo.
- Add the comment as per Martin's suggestion.
- Added Martin's review tags
Patchv2
- Added missing Neil's Reviewed-by tags.
---
 arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 9ea336c33d00..5624ff034659 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -67,17 +67,19 @@
 	};
 
 	tflash_vdd: regulator-tflash_vdd {
-		/*
-		 * signal name from schematics: TFLASH_VDD_EN
-		 */
 		compatible = "regulator-fixed";
 
 		regulator-name = "TFLASH_VDD";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 
+		/*
+		 * signal name from schematics: TFLASH_VDD_EN
+		 */
 		gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
+		/* U16 RT9179GB */
+		vin-supply = <&vddio_ao3v3>;
 	};
 
 	tf_io: gpio-regulator-tf_io {
@@ -95,6 +97,8 @@
 
 		states = <3300000 0>,
 			 <1800000 1>;
+		/* U12/U13 RT9179GB */
+		vin-supply = <&vddio_ao3v3>;
 	};
 
 	vcc1v8: regulator-vcc1v8 {
@@ -102,6 +106,9 @@
 		regulator-name = "VCC1V8";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		/* U18 RT9179GB */
+		vin-supply = <&vddio_ao3v3>;
 	};
 
 	vcc3v3: regulator-vcc3v3 {
-- 
2.23.0


^ permalink raw reply related	[flat|nested] 18+ messages in thread
* [PATCHv3-next 2/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to VDDIO_AO3V3 regulator
@ 2019-09-06 12:32   ` Anand Moon
  0 siblings, 0 replies; 18+ messages in thread
From: Anand Moon @ 2019-09-06 12:32 UTC (permalink / raw)
  To: Rob Herring, Martin Blumenstingl, Jerome Brunet, Neil Armstrong,
	Kevin Hilman
  Cc: devicetree, linux-kernel, linux-arm-kernel, linux-amlogic

As per schematics TFLASH_VDD, TF_IO, VCC3V3 fixed regulator output which
is supplied by VDDIO_AO3V3.

While here, move the comment name with the signal name in the
schematics above the gpio property to make it consistent with other
regulators.

Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
changes from previous.
Patchv1
- Fix the typo.
- Add the comment as per Martin's suggestion.
- Added Martin's review tags
Patchv2
- Added missing Neil's Reviewed-by tags.
---
 arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 9ea336c33d00..5624ff034659 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -67,17 +67,19 @@
 	};
 
 	tflash_vdd: regulator-tflash_vdd {
-		/*
-		 * signal name from schematics: TFLASH_VDD_EN
-		 */
 		compatible = "regulator-fixed";
 
 		regulator-name = "TFLASH_VDD";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 
+		/*
+		 * signal name from schematics: TFLASH_VDD_EN
+		 */
 		gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
+		/* U16 RT9179GB */
+		vin-supply = <&vddio_ao3v3>;
 	};
 
 	tf_io: gpio-regulator-tf_io {
@@ -95,6 +97,8 @@
 
 		states = <3300000 0>,
 			 <1800000 1>;
+		/* U12/U13 RT9179GB */
+		vin-supply = <&vddio_ao3v3>;
 	};
 
 	vcc1v8: regulator-vcc1v8 {
@@ -102,6 +106,9 @@
 		regulator-name = "VCC1V8";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		/* U18 RT9179GB */
+		vin-supply = <&vddio_ao3v3>;
 	};
 
 	vcc3v3: regulator-vcc3v3 {
-- 
2.23.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 18+ messages in thread
* [PATCHv3-next 2/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to VDDIO_AO3V3 regulator
@ 2019-09-06 12:32   ` Anand Moon
  0 siblings, 0 replies; 18+ messages in thread
From: Anand Moon @ 2019-09-06 12:32 UTC (permalink / raw)
  To: Rob Herring, Martin Blumenstingl, Jerome Brunet, Neil Armstrong,
	Kevin Hilman
  Cc: devicetree, linux-kernel, linux-arm-kernel, linux-amlogic

As per schematics TFLASH_VDD, TF_IO, VCC3V3 fixed regulator output which
is supplied by VDDIO_AO3V3.

While here, move the comment name with the signal name in the
schematics above the gpio property to make it consistent with other
regulators.

Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
changes from previous.
Patchv1
- Fix the typo.
- Add the comment as per Martin's suggestion.
- Added Martin's review tags
Patchv2
- Added missing Neil's Reviewed-by tags.
---
 arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 9ea336c33d00..5624ff034659 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -67,17 +67,19 @@
 	};
 
 	tflash_vdd: regulator-tflash_vdd {
-		/*
-		 * signal name from schematics: TFLASH_VDD_EN
-		 */
 		compatible = "regulator-fixed";
 
 		regulator-name = "TFLASH_VDD";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 
+		/*
+		 * signal name from schematics: TFLASH_VDD_EN
+		 */
 		gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
+		/* U16 RT9179GB */
+		vin-supply = <&vddio_ao3v3>;
 	};
 
 	tf_io: gpio-regulator-tf_io {
@@ -95,6 +97,8 @@
 
 		states = <3300000 0>,
 			 <1800000 1>;
+		/* U12/U13 RT9179GB */
+		vin-supply = <&vddio_ao3v3>;
 	};
 
 	vcc1v8: regulator-vcc1v8 {
@@ -102,6 +106,9 @@
 		regulator-name = "VCC1V8";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		/* U18 RT9179GB */
+		vin-supply = <&vddio_ao3v3>;
 	};
 
 	vcc3v3: regulator-vcc3v3 {
-- 
2.23.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply related	[flat|nested] 18+ messages in thread
* [PATCHv3-next 3/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to HDMI supply
  2019-09-06 12:32 ` Anand Moon
  (?)
@ 2019-09-06 12:32   ` Anand Moon
  -1 siblings, 0 replies; 18+ messages in thread
From: Anand Moon @ 2019-09-06 12:32 UTC (permalink / raw)
  To: Rob Herring, Martin Blumenstingl, Jerome Brunet, Neil Armstrong,
	Kevin Hilman
  Cc: devicetree, linux-arm-kernel, linux-amlogic, linux-kernel

As per schematics HDMI_P5V0 is supplied by P5V0 so add missing link.

Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
Changes from previous
Patchv1
- As per Martin's suggestion added the HDMI_P5V0 fix regulator node.
Patchv2
- Added Matrin's and Neil's Reviewed-by.
---
 arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 5624ff034659..6ae9fafe4244 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -66,6 +66,15 @@
 		regulator-always-on;
 	};
 
+	hdmi_p5v0: regulator-hdmi_p5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "HDMI_P5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		/* AP2331SA-7 */
+		vin-supply = <&p5v0>;
+	};
+
 	tflash_vdd: regulator-tflash_vdd {
 		compatible = "regulator-fixed";
 
@@ -220,6 +229,7 @@
 	status = "okay";
 	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
 	pinctrl-names = "default";
+	hdmi-supply = <&hdmi_p5v0>;
 };
 
 &hdmi_tx_tmds_port {
-- 
2.23.0


^ permalink raw reply related	[flat|nested] 18+ messages in thread
* [PATCHv3-next 3/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to HDMI supply
@ 2019-09-06 12:32   ` Anand Moon
  0 siblings, 0 replies; 18+ messages in thread
From: Anand Moon @ 2019-09-06 12:32 UTC (permalink / raw)
  To: Rob Herring, Martin Blumenstingl, Jerome Brunet, Neil Armstrong,
	Kevin Hilman
  Cc: devicetree, linux-kernel, linux-arm-kernel, linux-amlogic

As per schematics HDMI_P5V0 is supplied by P5V0 so add missing link.

Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
Changes from previous
Patchv1
- As per Martin's suggestion added the HDMI_P5V0 fix regulator node.
Patchv2
- Added Matrin's and Neil's Reviewed-by.
---
 arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 5624ff034659..6ae9fafe4244 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -66,6 +66,15 @@
 		regulator-always-on;
 	};
 
+	hdmi_p5v0: regulator-hdmi_p5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "HDMI_P5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		/* AP2331SA-7 */
+		vin-supply = <&p5v0>;
+	};
+
 	tflash_vdd: regulator-tflash_vdd {
 		compatible = "regulator-fixed";
 
@@ -220,6 +229,7 @@
 	status = "okay";
 	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
 	pinctrl-names = "default";
+	hdmi-supply = <&hdmi_p5v0>;
 };
 
 &hdmi_tx_tmds_port {
-- 
2.23.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 18+ messages in thread
* [PATCHv3-next 3/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to HDMI supply
@ 2019-09-06 12:32   ` Anand Moon
  0 siblings, 0 replies; 18+ messages in thread
From: Anand Moon @ 2019-09-06 12:32 UTC (permalink / raw)
  To: Rob Herring, Martin Blumenstingl, Jerome Brunet, Neil Armstrong,
	Kevin Hilman
  Cc: devicetree, linux-kernel, linux-arm-kernel, linux-amlogic

As per schematics HDMI_P5V0 is supplied by P5V0 so add missing link.

Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
Changes from previous
Patchv1
- As per Martin's suggestion added the HDMI_P5V0 fix regulator node.
Patchv2
- Added Matrin's and Neil's Reviewed-by.
---
 arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 5624ff034659..6ae9fafe4244 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -66,6 +66,15 @@
 		regulator-always-on;
 	};
 
+	hdmi_p5v0: regulator-hdmi_p5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "HDMI_P5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		/* AP2331SA-7 */
+		vin-supply = <&p5v0>;
+	};
+
 	tflash_vdd: regulator-tflash_vdd {
 		compatible = "regulator-fixed";
 
@@ -220,6 +229,7 @@
 	status = "okay";
 	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
 	pinctrl-names = "default";
+	hdmi-supply = <&hdmi_p5v0>;
 };
 
 &hdmi_tx_tmds_port {
-- 
2.23.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply related	[flat|nested] 18+ messages in thread
* Re: [PATCHv3-next 0/3] Odroid c2 missing regulator linking
  2019-09-06 12:20 ` Anand Moon
  (?)
@ 2019-09-26 15:38   ` Anand Moon
  -1 siblings, 0 replies; 18+ messages in thread
From: Anand Moon @ 2019-09-26 15:38 UTC (permalink / raw)
  To: Rob Herring, Martin Blumenstingl, Jerome Brunet, Neil Armstrong,
	Kevin Hilman
  Cc: devicetree, linux-arm-kernel, linux-amlogic, Linux Kernel

Hi Kevin,

On Fri, 6 Sep 2019 at 17:50, Anand Moon <linux.amoon@gmail.com> wrote:
>
> Below small changes help re-configure or fix missing inter linking
> of regulator node.
>
> Re-based on linux-next-20190904
> Changes from previous patch's series.
> Build using Cross Compiler.
>
> Added missing Reviewed-by Neil's and Martin.
> Added few suggestion from martin for rename of node.
>
> Dependencies:
> Changes based top on my previous usb fix series patch's.
>
> [0] https://patchwork.kernel.org/patch/11113095/
> [1] https://patchwork.kernel.org/patch/11113099/
> [3] https://patchwork.kernel.org/patch/11113103/
>
> Hope this series get picked up for 5.4-rc1, finger crossed.
>
> Changes for previous changes.
> Fix some typo.
> Updated few patches as per Martin's suggestion.
>
> I will try to commit less mistake in the future.
>
> Best Regards
> -Anand
>

Gentle ping for this series.

Best Regards
-Anand

> Anand Moon (3):
>   arm64: dts: meson: odroid-c2: Add missing regulator linked to P5V0
>     regulator
>   arm64: dts: meson: odroid-c2: Add missing regulator linked to
>     VDDIO_AO3V3 regulator
>   arm64: dts: meson: odroid-c2: Add missing regulator linked to HDMI
>     supply
>
>  .../boot/dts/amlogic/meson-gxbb-odroidc2.dts  | 53 +++++++++++++++++--
>  1 file changed, 50 insertions(+), 3 deletions(-)
>
> --
> 2.23.0
>

^ permalink raw reply	[flat|nested] 18+ messages in thread
* Re: [PATCHv3-next 0/3] Odroid c2 missing regulator linking
@ 2019-09-26 15:38   ` Anand Moon
  0 siblings, 0 replies; 18+ messages in thread
From: Anand Moon @ 2019-09-26 15:38 UTC (permalink / raw)
  To: Rob Herring, Martin Blumenstingl, Jerome Brunet, Neil Armstrong,
	Kevin Hilman
  Cc: devicetree, Linux Kernel, linux-arm-kernel, linux-amlogic

Hi Kevin,

On Fri, 6 Sep 2019 at 17:50, Anand Moon <linux.amoon@gmail.com> wrote:
>
> Below small changes help re-configure or fix missing inter linking
> of regulator node.
>
> Re-based on linux-next-20190904
> Changes from previous patch's series.
> Build using Cross Compiler.
>
> Added missing Reviewed-by Neil's and Martin.
> Added few suggestion from martin for rename of node.
>
> Dependencies:
> Changes based top on my previous usb fix series patch's.
>
> [0] https://patchwork.kernel.org/patch/11113095/
> [1] https://patchwork.kernel.org/patch/11113099/
> [3] https://patchwork.kernel.org/patch/11113103/
>
> Hope this series get picked up for 5.4-rc1, finger crossed.
>
> Changes for previous changes.
> Fix some typo.
> Updated few patches as per Martin's suggestion.
>
> I will try to commit less mistake in the future.
>
> Best Regards
> -Anand
>

Gentle ping for this series.

Best Regards
-Anand

> Anand Moon (3):
>   arm64: dts: meson: odroid-c2: Add missing regulator linked to P5V0
>     regulator
>   arm64: dts: meson: odroid-c2: Add missing regulator linked to
>     VDDIO_AO3V3 regulator
>   arm64: dts: meson: odroid-c2: Add missing regulator linked to HDMI
>     supply
>
>  .../boot/dts/amlogic/meson-gxbb-odroidc2.dts  | 53 +++++++++++++++++--
>  1 file changed, 50 insertions(+), 3 deletions(-)
>
> --
> 2.23.0
>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 18+ messages in thread
* Re: [PATCHv3-next 0/3] Odroid c2 missing regulator linking
@ 2019-09-26 15:38   ` Anand Moon
  0 siblings, 0 replies; 18+ messages in thread
From: Anand Moon @ 2019-09-26 15:38 UTC (permalink / raw)
  To: Rob Herring, Martin Blumenstingl, Jerome Brunet, Neil Armstrong,
	Kevin Hilman
  Cc: devicetree, Linux Kernel, linux-arm-kernel, linux-amlogic

Hi Kevin,

On Fri, 6 Sep 2019 at 17:50, Anand Moon <linux.amoon@gmail.com> wrote:
>
> Below small changes help re-configure or fix missing inter linking
> of regulator node.
>
> Re-based on linux-next-20190904
> Changes from previous patch's series.
> Build using Cross Compiler.
>
> Added missing Reviewed-by Neil's and Martin.
> Added few suggestion from martin for rename of node.
>
> Dependencies:
> Changes based top on my previous usb fix series patch's.
>
> [0] https://patchwork.kernel.org/patch/11113095/
> [1] https://patchwork.kernel.org/patch/11113099/
> [3] https://patchwork.kernel.org/patch/11113103/
>
> Hope this series get picked up for 5.4-rc1, finger crossed.
>
> Changes for previous changes.
> Fix some typo.
> Updated few patches as per Martin's suggestion.
>
> I will try to commit less mistake in the future.
>
> Best Regards
> -Anand
>

Gentle ping for this series.

Best Regards
-Anand

> Anand Moon (3):
>   arm64: dts: meson: odroid-c2: Add missing regulator linked to P5V0
>     regulator
>   arm64: dts: meson: odroid-c2: Add missing regulator linked to
>     VDDIO_AO3V3 regulator
>   arm64: dts: meson: odroid-c2: Add missing regulator linked to HDMI
>     supply
>
>  .../boot/dts/amlogic/meson-gxbb-odroidc2.dts  | 53 +++++++++++++++++--
>  1 file changed, 50 insertions(+), 3 deletions(-)
>
> --
> 2.23.0
>

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 18+ messages in thread
* [PATCHv3-next 0/3] Odroid c2 missing regulator linking
@ 2019-09-06 12:20 ` Anand Moon
  0 siblings, 0 replies; 18+ messages in thread
From: Anand Moon @ 2019-09-06 12:20 UTC (permalink / raw)
  To: Rob Herring, Martin Blumenstingl, Jerome Brunet, Neil Armstrong,
	Kevin Hilman
  Cc: devicetree, linux-arm-kernel, linux-amlogic, linux-kernel

Below small changes help re-configure or fix missing inter linking
of regulator node.

Re-based on linux-next-20190904
Changes from previous patch's series.
Build using Cross Compiler.

Added missing Reviewed-by Neil's and Martin.
Added few suggestion from martin for rename of node.

Dependencies:
Changes based top on my previous usb fix series patch's.

[0] https://patchwork.kernel.org/patch/11113095/
[1] https://patchwork.kernel.org/patch/11113099/
[3] https://patchwork.kernel.org/patch/11113103/

Hope this series get picked up for 5.4-rc1, finger crossed.

Changes for previous changes.
Fix some typo.
Updated few patches as per Martin's suggestion.

I will try to commit less mistake in the future.

Best Regards
-Anand

Anand Moon (3):
  arm64: dts: meson: odroid-c2: Add missing regulator linked to P5V0
    regulator
  arm64: dts: meson: odroid-c2: Add missing regulator linked to
    VDDIO_AO3V3 regulator
  arm64: dts: meson: odroid-c2: Add missing regulator linked to HDMI
    supply

 .../boot/dts/amlogic/meson-gxbb-odroidc2.dts  | 53 +++++++++++++++++--
 1 file changed, 50 insertions(+), 3 deletions(-)

-- 
2.23.0


^ permalink raw reply	[flat|nested] 18+ messages in thread
* [PATCHv3-next 0/3] Odroid c2 missing regulator linking
@ 2019-09-06 12:20 ` Anand Moon
  0 siblings, 0 replies; 18+ messages in thread
From: Anand Moon @ 2019-09-06 12:20 UTC (permalink / raw)
  To: Rob Herring, Martin Blumenstingl, Jerome Brunet, Neil Armstrong,
	Kevin Hilman
  Cc: devicetree, linux-kernel, linux-arm-kernel, linux-amlogic

Below small changes help re-configure or fix missing inter linking
of regulator node.

Re-based on linux-next-20190904
Changes from previous patch's series.
Build using Cross Compiler.

Added missing Reviewed-by Neil's and Martin.
Added few suggestion from martin for rename of node.

Dependencies:
Changes based top on my previous usb fix series patch's.

[0] https://patchwork.kernel.org/patch/11113095/
[1] https://patchwork.kernel.org/patch/11113099/
[3] https://patchwork.kernel.org/patch/11113103/

Hope this series get picked up for 5.4-rc1, finger crossed.

Changes for previous changes.
Fix some typo.
Updated few patches as per Martin's suggestion.

I will try to commit less mistake in the future.

Best Regards
-Anand

Anand Moon (3):
  arm64: dts: meson: odroid-c2: Add missing regulator linked to P5V0
    regulator
  arm64: dts: meson: odroid-c2: Add missing regulator linked to
    VDDIO_AO3V3 regulator
  arm64: dts: meson: odroid-c2: Add missing regulator linked to HDMI
    supply

 .../boot/dts/amlogic/meson-gxbb-odroidc2.dts  | 53 +++++++++++++++++--
 1 file changed, 50 insertions(+), 3 deletions(-)

-- 
2.23.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 18+ messages in thread
* [PATCHv3-next 0/3] Odroid c2 missing regulator linking
@ 2019-09-06 12:20 ` Anand Moon
  0 siblings, 0 replies; 18+ messages in thread
From: Anand Moon @ 2019-09-06 12:20 UTC (permalink / raw)
  To: Rob Herring, Martin Blumenstingl, Jerome Brunet, Neil Armstrong,
	Kevin Hilman
  Cc: devicetree, linux-kernel, linux-arm-kernel, linux-amlogic

Below small changes help re-configure or fix missing inter linking
of regulator node.

Re-based on linux-next-20190904
Changes from previous patch's series.
Build using Cross Compiler.

Added missing Reviewed-by Neil's and Martin.
Added few suggestion from martin for rename of node.

Dependencies:
Changes based top on my previous usb fix series patch's.

[0] https://patchwork.kernel.org/patch/11113095/
[1] https://patchwork.kernel.org/patch/11113099/
[3] https://patchwork.kernel.org/patch/11113103/

Hope this series get picked up for 5.4-rc1, finger crossed.

Changes for previous changes.
Fix some typo.
Updated few patches as per Martin's suggestion.

I will try to commit less mistake in the future.

Best Regards
-Anand

Anand Moon (3):
  arm64: dts: meson: odroid-c2: Add missing regulator linked to P5V0
    regulator
  arm64: dts: meson: odroid-c2: Add missing regulator linked to
    VDDIO_AO3V3 regulator
  arm64: dts: meson: odroid-c2: Add missing regulator linked to HDMI
    supply

 .../boot/dts/amlogic/meson-gxbb-odroidc2.dts  | 53 +++++++++++++++++--
 1 file changed, 50 insertions(+), 3 deletions(-)

-- 
2.23.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

^ permalink raw reply	[flat|nested] 18+ messages in thread
end of thread, other threads:[~2019-09-26 15:39 UTC | newest]

Thread overview: 18+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-06 12:32 [PATCHv3-next 0/3] Odroid c2 missing regulator linking Anand Moon
2019-09-06 12:32 ` Anand Moon
2019-09-06 12:32 ` Anand Moon
2019-09-06 12:32 ` [PATCHv3-next 1/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to P5V0 regulator Anand Moon
2019-09-06 12:32   ` Anand Moon
2019-09-06 12:32   ` Anand Moon
2019-09-06 12:32 ` [PATCHv3-next 2/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to VDDIO_AO3V3 regulator Anand Moon
2019-09-06 12:32   ` Anand Moon
2019-09-06 12:32   ` Anand Moon
2019-09-06 12:32 ` [PATCHv3-next 3/3] arm64: dts: meson: odroid-c2: Add missing regulator linked to HDMI supply Anand Moon
2019-09-06 12:32   ` Anand Moon
2019-09-06 12:32   ` Anand Moon
  -- strict thread matches above, loose matches on Subject: below --
2019-09-06 12:20 [PATCHv3-next 0/3] Odroid c2 missing regulator linking Anand Moon
2019-09-06 12:20 ` Anand Moon
2019-09-06 12:20 ` Anand Moon
2019-09-26 15:38 ` Anand Moon
2019-09-26 15:38   ` Anand Moon
2019-09-26 15:38   ` Anand Moon

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.