All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v2] dt-bindings: hspi: Convert bindings to json-schema
@ 2019-09-16  7:53 Simon Horman
  2019-09-17 12:51 ` Rob Herring
  2019-10-01 11:41 ` Applied "dt-bindings: hspi: Convert bindings to json-schema" to the spi tree Mark Brown
  0 siblings, 2 replies; 3+ messages in thread
From: Simon Horman @ 2019-09-16  7:53 UTC (permalink / raw)
  To: Mark Brown, Geert Uytterhoeven
  Cc: Rob Herring, Mark Rutland, Magnus Damm, Yoshihiro Kaneko,
	linux-spi, devicetree, linux-renesas-soc, Simon Horman

Convert Renesas HSPI bindings documentation to json-schema.
Also name bindings documentation file according to the compat string
being documented.

As a side effect of this change all currently supported/used compat
strings are listed while no while card compat string is documented.
This, in my opinion, is desirable as only supported hardware should
be documented.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
Based on v5.3-rc1
Tested using:
  ARCH=arm make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/spi/renesas,hspi.yaml

v2
- reference spi-controller.yaml# and thus do not document
  #address-cells and #size-cells properties.
  These properties are still listed as required.
- Drop comment regarding pinctrl properties.
  These are not needed as only one state, "default", is supported
- Document clocks and power-domains properties.
  The clocks property is required. Add these properties to the example.
- Drop unnecessary interrupt-parent property from example.
---
 .../devicetree/bindings/spi/renesas,hspi.yaml      | 57 ++++++++++++++++++++++
 Documentation/devicetree/bindings/spi/sh-hspi.txt  | 26 ----------
 2 files changed, 57 insertions(+), 26 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/spi/renesas,hspi.yaml
 delete mode 100644 Documentation/devicetree/bindings/spi/sh-hspi.txt

diff --git a/Documentation/devicetree/bindings/spi/renesas,hspi.yaml b/Documentation/devicetree/bindings/spi/renesas,hspi.yaml
new file mode 100644
index 000000000000..c429cf4bea5b
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/renesas,hspi.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/renesas,hspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas HSPI
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+        - renesas,hspi-r8a7778 # R-Car M1A
+        - renesas,hspi-r8a7779 # R-Car H1
+      - const: renesas,hspi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - '#address-cells'
+  - '#size-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7778-clock.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    hspi0: spi@fffc7000 {
+        compatible = "renesas,hspi-r8a7778", "renesas,hspi";
+        reg = <0xfffc7000 0x18>;
+        interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&mstp0_clks R8A7778_CLK_HSPI>;
+        power-domains = <&cpg_clocks>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
+
diff --git a/Documentation/devicetree/bindings/spi/sh-hspi.txt b/Documentation/devicetree/bindings/spi/sh-hspi.txt
deleted file mode 100644
index b9d1e4d11a77..000000000000
--- a/Documentation/devicetree/bindings/spi/sh-hspi.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Renesas HSPI.
-
-Required properties:
-- compatible       : "renesas,hspi-<soctype>", "renesas,hspi" as fallback.
-		     Examples with soctypes are:
-		       - "renesas,hspi-r8a7778" (R-Car M1)
-		       - "renesas,hspi-r8a7779" (R-Car H1)
-- reg              : Offset and length of the register set for the device
-- interrupts       : Interrupt specifier
-- #address-cells   : Must be <1>
-- #size-cells      : Must be <0>
-
-Pinctrl properties might be needed, too.  See
-Documentation/devicetree/bindings/pinctrl/renesas,*.
-
-Example:
-
-	hspi0: spi@fffc7000 {
-		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
-		reg = <0xfffc7000 0x18>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-- 
2.11.0

^ permalink raw reply related	[flat|nested] 3+ messages in thread

* Re: [PATCH v2] dt-bindings: hspi: Convert bindings to json-schema
  2019-09-16  7:53 [PATCH v2] dt-bindings: hspi: Convert bindings to json-schema Simon Horman
@ 2019-09-17 12:51 ` Rob Herring
  2019-10-01 11:41 ` Applied "dt-bindings: hspi: Convert bindings to json-schema" to the spi tree Mark Brown
  1 sibling, 0 replies; 3+ messages in thread
From: Rob Herring @ 2019-09-17 12:51 UTC (permalink / raw)
  To: Simon Horman
  Cc: Mark Brown, Geert Uytterhoeven, Mark Rutland, Magnus Damm,
	Yoshihiro Kaneko, linux-spi, devicetree,
	open list:MEDIA DRIVERS FOR RENESAS - FCP

On Mon, Sep 16, 2019 at 2:54 AM Simon Horman <horms+renesas@verge.net.au> wrote:
>
> Convert Renesas HSPI bindings documentation to json-schema.
> Also name bindings documentation file according to the compat string
> being documented.
>
> As a side effect of this change all currently supported/used compat
> strings are listed while no while card compat string is documented.
> This, in my opinion, is desirable as only supported hardware should
> be documented.
>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> ---
> Based on v5.3-rc1
> Tested using:
>   ARCH=arm make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/spi/renesas,hspi.yaml
>
> v2
> - reference spi-controller.yaml# and thus do not document
>   #address-cells and #size-cells properties.
>   These properties are still listed as required.
> - Drop comment regarding pinctrl properties.
>   These are not needed as only one state, "default", is supported
> - Document clocks and power-domains properties.
>   The clocks property is required. Add these properties to the example.
> - Drop unnecessary interrupt-parent property from example.
> ---
>  .../devicetree/bindings/spi/renesas,hspi.yaml      | 57 ++++++++++++++++++++++
>  Documentation/devicetree/bindings/spi/sh-hspi.txt  | 26 ----------
>  2 files changed, 57 insertions(+), 26 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/spi/renesas,hspi.yaml
>  delete mode 100644 Documentation/devicetree/bindings/spi/sh-hspi.txt

Reviewed-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Applied "dt-bindings: hspi: Convert bindings to json-schema" to the spi tree
  2019-09-16  7:53 [PATCH v2] dt-bindings: hspi: Convert bindings to json-schema Simon Horman
  2019-09-17 12:51 ` Rob Herring
@ 2019-10-01 11:41 ` Mark Brown
  1 sibling, 0 replies; 3+ messages in thread
From: Mark Brown @ 2019-10-01 11:41 UTC (permalink / raw)
  To: Simon Horman
  Cc: devicetree, Geert Uytterhoeven, linux-renesas-soc, linux-spi,
	Magnus Damm, Mark Brown, Mark Rutland, Rob Herring,
	Yoshihiro Kaneko

The patch

   dt-bindings: hspi: Convert bindings to json-schema

has been applied to the spi tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-5.5

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 85d27be81e39323c8e3c1151e4858b26d7e1b20d Mon Sep 17 00:00:00 2001
From: Simon Horman <horms+renesas@verge.net.au>
Date: Mon, 16 Sep 2019 09:53:52 +0200
Subject: [PATCH] dt-bindings: hspi: Convert bindings to json-schema

Convert Renesas HSPI bindings documentation to json-schema.
Also name bindings documentation file according to the compat string
being documented.

As a side effect of this change all currently supported/used compat
strings are listed while no while card compat string is documented.
This, in my opinion, is desirable as only supported hardware should
be documented.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20190916075352.32108-1-horms+renesas@verge.net.au
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 .../devicetree/bindings/spi/renesas,hspi.yaml | 57 +++++++++++++++++++
 .../devicetree/bindings/spi/sh-hspi.txt       | 26 ---------
 2 files changed, 57 insertions(+), 26 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/spi/renesas,hspi.yaml
 delete mode 100644 Documentation/devicetree/bindings/spi/sh-hspi.txt

diff --git a/Documentation/devicetree/bindings/spi/renesas,hspi.yaml b/Documentation/devicetree/bindings/spi/renesas,hspi.yaml
new file mode 100644
index 000000000000..c429cf4bea5b
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/renesas,hspi.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/renesas,hspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas HSPI
+
+maintainers:
+  - Geert Uytterhoeven <geert+renesas@glider.be>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+        - renesas,hspi-r8a7778 # R-Car M1A
+        - renesas,hspi-r8a7779 # R-Car H1
+      - const: renesas,hspi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - '#address-cells'
+  - '#size-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7778-clock.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    hspi0: spi@fffc7000 {
+        compatible = "renesas,hspi-r8a7778", "renesas,hspi";
+        reg = <0xfffc7000 0x18>;
+        interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&mstp0_clks R8A7778_CLK_HSPI>;
+        power-domains = <&cpg_clocks>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };
+
diff --git a/Documentation/devicetree/bindings/spi/sh-hspi.txt b/Documentation/devicetree/bindings/spi/sh-hspi.txt
deleted file mode 100644
index b9d1e4d11a77..000000000000
--- a/Documentation/devicetree/bindings/spi/sh-hspi.txt
+++ /dev/null
@@ -1,26 +0,0 @@
-Renesas HSPI.
-
-Required properties:
-- compatible       : "renesas,hspi-<soctype>", "renesas,hspi" as fallback.
-		     Examples with soctypes are:
-		       - "renesas,hspi-r8a7778" (R-Car M1)
-		       - "renesas,hspi-r8a7779" (R-Car H1)
-- reg              : Offset and length of the register set for the device
-- interrupts       : Interrupt specifier
-- #address-cells   : Must be <1>
-- #size-cells      : Must be <0>
-
-Pinctrl properties might be needed, too.  See
-Documentation/devicetree/bindings/pinctrl/renesas,*.
-
-Example:
-
-	hspi0: spi@fffc7000 {
-		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
-		reg = <0xfffc7000 0x18>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-- 
2.20.1


^ permalink raw reply related	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2019-10-01 11:41 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-16  7:53 [PATCH v2] dt-bindings: hspi: Convert bindings to json-schema Simon Horman
2019-09-17 12:51 ` Rob Herring
2019-10-01 11:41 ` Applied "dt-bindings: hspi: Convert bindings to json-schema" to the spi tree Mark Brown

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.