All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jerome Pouiller <Jerome.Pouiller@silabs.com>
To: "devel@driverdev.osuosl.org" <devel@driverdev.osuosl.org>,
	"linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>
Cc: "netdev@vger.kernel.org" <netdev@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Kalle Valo <kvalo@codeaurora.org>,
	"David S . Miller" <davem@davemloft.net>,
	David Le Goff <David.Legoff@silabs.com>,
	Jerome Pouiller <Jerome.Pouiller@silabs.com>
Subject: [PATCH v3 09/20] staging: wfx: add support for start-up indication
Date: Thu, 19 Sep 2019 14:25:41 +0000	[thread overview]
Message-ID: <20190919142527.31797-10-Jerome.Pouiller@silabs.com> (raw)
In-Reply-To: <20190919142527.31797-1-Jerome.Pouiller@silabs.com>

From: Jérôme Pouiller <jerome.pouiller@silabs.com>

Once firmware is loaded, it send a first indication to host. This
indication signalize that host can start to communicate with firmware.
In add, it contains information about chip and firmware (MAC addresses,
firmware version, etc...).

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
---
 drivers/staging/wfx/Makefile |  1 +
 drivers/staging/wfx/bh.c     |  4 ++-
 drivers/staging/wfx/hif_rx.c | 57 ++++++++++++++++++++++++++++++++++++
 drivers/staging/wfx/hif_rx.h | 18 ++++++++++++
 drivers/staging/wfx/main.c   | 45 ++++++++++++++++++++++++++++
 drivers/staging/wfx/wfx.h    |  5 ++++
 6 files changed, 129 insertions(+), 1 deletion(-)
 create mode 100644 drivers/staging/wfx/hif_rx.c
 create mode 100644 drivers/staging/wfx/hif_rx.h

diff --git a/drivers/staging/wfx/Makefile b/drivers/staging/wfx/Makefile
index 1abd3115f11d..35670b86c64f 100644
--- a/drivers/staging/wfx/Makefile
+++ b/drivers/staging/wfx/Makefile
@@ -7,6 +7,7 @@ wfx-y := \
 	bh.o \
 	hwio.o \
 	fwio.o \
+	hif_rx.o \
 	main.o \
 	debug.o
 wfx-$(CONFIG_SPI) += bus_spi.o
diff --git a/drivers/staging/wfx/bh.c b/drivers/staging/wfx/bh.c
index 76afecdf579d..c40da3f1f25d 100644
--- a/drivers/staging/wfx/bh.c
+++ b/drivers/staging/wfx/bh.c
@@ -12,6 +12,7 @@
 #include "wfx.h"
 #include "hwio.h"
 #include "traces.h"
+#include "hif_rx.h"
 #include "hif_api_cmd.h"
 
 static void device_wakeup(struct wfx_dev *wdev)
@@ -107,7 +108,8 @@ static int rx_helper(struct wfx_dev *wdev, size_t read_len, int *is_cnf)
 	}
 
 	skb_put(skb, hif->len);
-	dev_kfree_skb(skb); /* FIXME: handle received data */
+	// wfx_handle_rx takes care on SKB livetime
+	wfx_handle_rx(wdev, skb);
 
 	return piggyback;
 
diff --git a/drivers/staging/wfx/hif_rx.c b/drivers/staging/wfx/hif_rx.c
new file mode 100644
index 000000000000..5c207e6d4348
--- /dev/null
+++ b/drivers/staging/wfx/hif_rx.c
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Implementation of chip-to-host event (aka indications) of WFxxx Split Mac
+ * (WSM) API.
+ *
+ * Copyright (c) 2017-2019, Silicon Laboratories, Inc.
+ * Copyright (c) 2010, ST-Ericsson
+ */
+#include <linux/skbuff.h>
+#include <linux/etherdevice.h>
+
+#include "hif_rx.h"
+#include "wfx.h"
+#include "hif_api_cmd.h"
+
+static int hif_startup_indication(struct wfx_dev *wdev, struct hif_msg *hif, void *buf)
+{
+	struct hif_ind_startup *body = buf;
+
+	if (body->status || body->firmware_type > 4) {
+		dev_err(wdev->dev, "received invalid startup indication");
+		return -EINVAL;
+	}
+	memcpy(&wdev->hw_caps, body, sizeof(struct hif_ind_startup));
+	le32_to_cpus(&wdev->hw_caps.status);
+	le16_to_cpus(&wdev->hw_caps.hardware_id);
+	le16_to_cpus(&wdev->hw_caps.num_inp_ch_bufs);
+	le16_to_cpus(&wdev->hw_caps.size_inp_ch_buf);
+
+	complete(&wdev->firmware_ready);
+	return 0;
+}
+
+static const struct {
+	int msg_id;
+	int (*handler)(struct wfx_dev *wdev, struct hif_msg *hif, void *buf);
+} hif_handlers[] = {
+	{ HIF_IND_ID_STARTUP,              hif_startup_indication },
+};
+
+void wfx_handle_rx(struct wfx_dev *wdev, struct sk_buff *skb)
+{
+	int i;
+	struct hif_msg *hif = (struct hif_msg *) skb->data;
+	int hif_id = hif->id;
+
+	for (i = 0; i < ARRAY_SIZE(hif_handlers); i++) {
+		if (hif_handlers[i].msg_id == hif_id) {
+			if (hif_handlers[i].handler)
+				hif_handlers[i].handler(wdev, hif, hif->body);
+			goto free;
+		}
+	}
+	dev_err(wdev->dev, "unsupported HIF ID %02x\n", hif_id);
+free:
+	dev_kfree_skb(skb);
+}
diff --git a/drivers/staging/wfx/hif_rx.h b/drivers/staging/wfx/hif_rx.h
new file mode 100644
index 000000000000..f07c10c8c6bd
--- /dev/null
+++ b/drivers/staging/wfx/hif_rx.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Implementation of chip-to-host event (aka indications) of WFxxx Split Mac
+ * (WSM) API.
+ *
+ * Copyright (c) 2017-2019, Silicon Laboratories, Inc.
+ * Copyright (c) 2010, ST-Ericsson
+ * Copyright (C) 2010, ST-Ericsson SA
+ */
+#ifndef WFX_HIF_RX_H
+#define WFX_HIF_RX_H
+
+struct wfx_dev;
+struct sk_buff;
+
+void wfx_handle_rx(struct wfx_dev *wdev, struct sk_buff *skb);
+
+#endif
diff --git a/drivers/staging/wfx/main.c b/drivers/staging/wfx/main.c
index f0bea053a0d9..5e7e7225f068 100644
--- a/drivers/staging/wfx/main.c
+++ b/drivers/staging/wfx/main.c
@@ -12,6 +12,7 @@
  */
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_net.h>
 #include <linux/gpio.h>
 #include <linux/gpio/consumer.h>
 #include <linux/mmc/sdio_func.h>
@@ -87,6 +88,9 @@ struct wfx_dev *wfx_init_common(struct device *dev,
 	wdev->hwbus_ops = hwbus_ops;
 	wdev->hwbus_priv = hwbus_priv;
 	memcpy(&wdev->pdata, pdata, sizeof(*pdata));
+
+	init_completion(&wdev->firmware_ready);
+
 	return wdev;
 }
 
@@ -96,7 +100,9 @@ void wfx_free_common(struct wfx_dev *wdev)
 
 int wfx_probe(struct wfx_dev *wdev)
 {
+	int i;
 	int err;
+	const void *macaddr;
 
 	wfx_bh_register(wdev);
 
@@ -104,6 +110,45 @@ int wfx_probe(struct wfx_dev *wdev)
 	if (err)
 		goto err1;
 
+	err = wait_for_completion_interruptible_timeout(&wdev->firmware_ready, 10 * HZ);
+	if (err <= 0) {
+		if (err == 0) {
+			dev_err(wdev->dev, "timeout while waiting for startup indication. IRQ configuration error?\n");
+			err = -ETIMEDOUT;
+		} else if (err == -ERESTARTSYS) {
+			dev_info(wdev->dev, "probe interrupted by user\n");
+		}
+		goto err1;
+	}
+
+	// FIXME: fill wiphy::hw_version
+	dev_info(wdev->dev, "started firmware %d.%d.%d \"%s\" (API: %d.%d, keyset: %02X, caps: 0x%.8X)\n",
+		 wdev->hw_caps.firmware_major, wdev->hw_caps.firmware_minor,
+		 wdev->hw_caps.firmware_build, wdev->hw_caps.firmware_label,
+		 wdev->hw_caps.api_version_major, wdev->hw_caps.api_version_minor,
+		 wdev->keyset, *((u32 *) &wdev->hw_caps.capabilities));
+
+	if (wfx_api_older_than(wdev, 1, 0)) {
+		dev_err(wdev->dev, "unsupported firmware API version (expect 1 while firmware returns %d)\n",
+			wdev->hw_caps.api_version_major);
+		err = -ENOTSUPP;
+		goto err1;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(wdev->addresses); i++) {
+		eth_zero_addr(wdev->addresses[i].addr);
+		macaddr = of_get_mac_address(wdev->dev->of_node);
+		if (macaddr) {
+			ether_addr_copy(wdev->addresses[i].addr, macaddr);
+			wdev->addresses[i].addr[ETH_ALEN - 1] += i;
+		}
+		ether_addr_copy(wdev->addresses[i].addr, wdev->hw_caps.mac_addr[i]);
+		if (!is_valid_ether_addr(wdev->addresses[i].addr)) {
+			dev_warn(wdev->dev, "using random MAC address\n");
+			eth_random_addr(wdev->addresses[i].addr);
+		}
+		dev_info(wdev->dev, "MAC address %d: %pM\n", i, wdev->addresses[i].addr);
+	}
 
 	return 0;
 
diff --git a/drivers/staging/wfx/wfx.h b/drivers/staging/wfx/wfx.h
index 4f28938fa3a6..f5f9a337d828 100644
--- a/drivers/staging/wfx/wfx.h
+++ b/drivers/staging/wfx/wfx.h
@@ -10,6 +10,9 @@
 #ifndef WFX_H
 #define WFX_H
 
+#include <linux/completion.h>
+#include <net/mac80211.h>
+
 #include "bh.h"
 #include "main.h"
 #include "hif_api_general.h"
@@ -19,10 +22,12 @@ struct hwbus_ops;
 struct wfx_dev {
 	struct wfx_platform_data pdata;
 	struct device		*dev;
+	struct mac_address	addresses[2];
 	const struct hwbus_ops	*hwbus_ops;
 	void			*hwbus_priv;
 
 	u8			keyset;
+	struct completion	firmware_ready;
 	struct hif_ind_startup	hw_caps;
 	struct wfx_hif		hif;
 };
-- 
2.20.1

WARNING: multiple messages have this Message-ID (diff)
From: Jerome Pouiller <Jerome.Pouiller@silabs.com>
To: "devel@driverdev.osuosl.org" <devel@driverdev.osuosl.org>,
	"linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>
Cc: "netdev@vger.kernel.org" <netdev@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	David Le Goff <David.Legoff@silabs.com>,
	"David S . Miller" <davem@davemloft.net>,
	Kalle Valo <kvalo@codeaurora.org>
Subject: [PATCH v3 09/20] staging: wfx: add support for start-up indication
Date: Thu, 19 Sep 2019 14:25:41 +0000	[thread overview]
Message-ID: <20190919142527.31797-10-Jerome.Pouiller@silabs.com> (raw)
In-Reply-To: <20190919142527.31797-1-Jerome.Pouiller@silabs.com>

From: Jérôme Pouiller <jerome.pouiller@silabs.com>

Once firmware is loaded, it send a first indication to host. This
indication signalize that host can start to communicate with firmware.
In add, it contains information about chip and firmware (MAC addresses,
firmware version, etc...).

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
---
 drivers/staging/wfx/Makefile |  1 +
 drivers/staging/wfx/bh.c     |  4 ++-
 drivers/staging/wfx/hif_rx.c | 57 ++++++++++++++++++++++++++++++++++++
 drivers/staging/wfx/hif_rx.h | 18 ++++++++++++
 drivers/staging/wfx/main.c   | 45 ++++++++++++++++++++++++++++
 drivers/staging/wfx/wfx.h    |  5 ++++
 6 files changed, 129 insertions(+), 1 deletion(-)
 create mode 100644 drivers/staging/wfx/hif_rx.c
 create mode 100644 drivers/staging/wfx/hif_rx.h

diff --git a/drivers/staging/wfx/Makefile b/drivers/staging/wfx/Makefile
index 1abd3115f11d..35670b86c64f 100644
--- a/drivers/staging/wfx/Makefile
+++ b/drivers/staging/wfx/Makefile
@@ -7,6 +7,7 @@ wfx-y := \
 	bh.o \
 	hwio.o \
 	fwio.o \
+	hif_rx.o \
 	main.o \
 	debug.o
 wfx-$(CONFIG_SPI) += bus_spi.o
diff --git a/drivers/staging/wfx/bh.c b/drivers/staging/wfx/bh.c
index 76afecdf579d..c40da3f1f25d 100644
--- a/drivers/staging/wfx/bh.c
+++ b/drivers/staging/wfx/bh.c
@@ -12,6 +12,7 @@
 #include "wfx.h"
 #include "hwio.h"
 #include "traces.h"
+#include "hif_rx.h"
 #include "hif_api_cmd.h"
 
 static void device_wakeup(struct wfx_dev *wdev)
@@ -107,7 +108,8 @@ static int rx_helper(struct wfx_dev *wdev, size_t read_len, int *is_cnf)
 	}
 
 	skb_put(skb, hif->len);
-	dev_kfree_skb(skb); /* FIXME: handle received data */
+	// wfx_handle_rx takes care on SKB livetime
+	wfx_handle_rx(wdev, skb);
 
 	return piggyback;
 
diff --git a/drivers/staging/wfx/hif_rx.c b/drivers/staging/wfx/hif_rx.c
new file mode 100644
index 000000000000..5c207e6d4348
--- /dev/null
+++ b/drivers/staging/wfx/hif_rx.c
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Implementation of chip-to-host event (aka indications) of WFxxx Split Mac
+ * (WSM) API.
+ *
+ * Copyright (c) 2017-2019, Silicon Laboratories, Inc.
+ * Copyright (c) 2010, ST-Ericsson
+ */
+#include <linux/skbuff.h>
+#include <linux/etherdevice.h>
+
+#include "hif_rx.h"
+#include "wfx.h"
+#include "hif_api_cmd.h"
+
+static int hif_startup_indication(struct wfx_dev *wdev, struct hif_msg *hif, void *buf)
+{
+	struct hif_ind_startup *body = buf;
+
+	if (body->status || body->firmware_type > 4) {
+		dev_err(wdev->dev, "received invalid startup indication");
+		return -EINVAL;
+	}
+	memcpy(&wdev->hw_caps, body, sizeof(struct hif_ind_startup));
+	le32_to_cpus(&wdev->hw_caps.status);
+	le16_to_cpus(&wdev->hw_caps.hardware_id);
+	le16_to_cpus(&wdev->hw_caps.num_inp_ch_bufs);
+	le16_to_cpus(&wdev->hw_caps.size_inp_ch_buf);
+
+	complete(&wdev->firmware_ready);
+	return 0;
+}
+
+static const struct {
+	int msg_id;
+	int (*handler)(struct wfx_dev *wdev, struct hif_msg *hif, void *buf);
+} hif_handlers[] = {
+	{ HIF_IND_ID_STARTUP,              hif_startup_indication },
+};
+
+void wfx_handle_rx(struct wfx_dev *wdev, struct sk_buff *skb)
+{
+	int i;
+	struct hif_msg *hif = (struct hif_msg *) skb->data;
+	int hif_id = hif->id;
+
+	for (i = 0; i < ARRAY_SIZE(hif_handlers); i++) {
+		if (hif_handlers[i].msg_id == hif_id) {
+			if (hif_handlers[i].handler)
+				hif_handlers[i].handler(wdev, hif, hif->body);
+			goto free;
+		}
+	}
+	dev_err(wdev->dev, "unsupported HIF ID %02x\n", hif_id);
+free:
+	dev_kfree_skb(skb);
+}
diff --git a/drivers/staging/wfx/hif_rx.h b/drivers/staging/wfx/hif_rx.h
new file mode 100644
index 000000000000..f07c10c8c6bd
--- /dev/null
+++ b/drivers/staging/wfx/hif_rx.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Implementation of chip-to-host event (aka indications) of WFxxx Split Mac
+ * (WSM) API.
+ *
+ * Copyright (c) 2017-2019, Silicon Laboratories, Inc.
+ * Copyright (c) 2010, ST-Ericsson
+ * Copyright (C) 2010, ST-Ericsson SA
+ */
+#ifndef WFX_HIF_RX_H
+#define WFX_HIF_RX_H
+
+struct wfx_dev;
+struct sk_buff;
+
+void wfx_handle_rx(struct wfx_dev *wdev, struct sk_buff *skb);
+
+#endif
diff --git a/drivers/staging/wfx/main.c b/drivers/staging/wfx/main.c
index f0bea053a0d9..5e7e7225f068 100644
--- a/drivers/staging/wfx/main.c
+++ b/drivers/staging/wfx/main.c
@@ -12,6 +12,7 @@
  */
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_net.h>
 #include <linux/gpio.h>
 #include <linux/gpio/consumer.h>
 #include <linux/mmc/sdio_func.h>
@@ -87,6 +88,9 @@ struct wfx_dev *wfx_init_common(struct device *dev,
 	wdev->hwbus_ops = hwbus_ops;
 	wdev->hwbus_priv = hwbus_priv;
 	memcpy(&wdev->pdata, pdata, sizeof(*pdata));
+
+	init_completion(&wdev->firmware_ready);
+
 	return wdev;
 }
 
@@ -96,7 +100,9 @@ void wfx_free_common(struct wfx_dev *wdev)
 
 int wfx_probe(struct wfx_dev *wdev)
 {
+	int i;
 	int err;
+	const void *macaddr;
 
 	wfx_bh_register(wdev);
 
@@ -104,6 +110,45 @@ int wfx_probe(struct wfx_dev *wdev)
 	if (err)
 		goto err1;
 
+	err = wait_for_completion_interruptible_timeout(&wdev->firmware_ready, 10 * HZ);
+	if (err <= 0) {
+		if (err == 0) {
+			dev_err(wdev->dev, "timeout while waiting for startup indication. IRQ configuration error?\n");
+			err = -ETIMEDOUT;
+		} else if (err == -ERESTARTSYS) {
+			dev_info(wdev->dev, "probe interrupted by user\n");
+		}
+		goto err1;
+	}
+
+	// FIXME: fill wiphy::hw_version
+	dev_info(wdev->dev, "started firmware %d.%d.%d \"%s\" (API: %d.%d, keyset: %02X, caps: 0x%.8X)\n",
+		 wdev->hw_caps.firmware_major, wdev->hw_caps.firmware_minor,
+		 wdev->hw_caps.firmware_build, wdev->hw_caps.firmware_label,
+		 wdev->hw_caps.api_version_major, wdev->hw_caps.api_version_minor,
+		 wdev->keyset, *((u32 *) &wdev->hw_caps.capabilities));
+
+	if (wfx_api_older_than(wdev, 1, 0)) {
+		dev_err(wdev->dev, "unsupported firmware API version (expect 1 while firmware returns %d)\n",
+			wdev->hw_caps.api_version_major);
+		err = -ENOTSUPP;
+		goto err1;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(wdev->addresses); i++) {
+		eth_zero_addr(wdev->addresses[i].addr);
+		macaddr = of_get_mac_address(wdev->dev->of_node);
+		if (macaddr) {
+			ether_addr_copy(wdev->addresses[i].addr, macaddr);
+			wdev->addresses[i].addr[ETH_ALEN - 1] += i;
+		}
+		ether_addr_copy(wdev->addresses[i].addr, wdev->hw_caps.mac_addr[i]);
+		if (!is_valid_ether_addr(wdev->addresses[i].addr)) {
+			dev_warn(wdev->dev, "using random MAC address\n");
+			eth_random_addr(wdev->addresses[i].addr);
+		}
+		dev_info(wdev->dev, "MAC address %d: %pM\n", i, wdev->addresses[i].addr);
+	}
 
 	return 0;
 
diff --git a/drivers/staging/wfx/wfx.h b/drivers/staging/wfx/wfx.h
index 4f28938fa3a6..f5f9a337d828 100644
--- a/drivers/staging/wfx/wfx.h
+++ b/drivers/staging/wfx/wfx.h
@@ -10,6 +10,9 @@
 #ifndef WFX_H
 #define WFX_H
 
+#include <linux/completion.h>
+#include <net/mac80211.h>
+
 #include "bh.h"
 #include "main.h"
 #include "hif_api_general.h"
@@ -19,10 +22,12 @@ struct hwbus_ops;
 struct wfx_dev {
 	struct wfx_platform_data pdata;
 	struct device		*dev;
+	struct mac_address	addresses[2];
 	const struct hwbus_ops	*hwbus_ops;
 	void			*hwbus_priv;
 
 	u8			keyset;
+	struct completion	firmware_ready;
 	struct hif_ind_startup	hw_caps;
 	struct wfx_hif		hif;
 };
-- 
2.20.1
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

  parent reply	other threads:[~2019-09-19 14:27 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-19 14:25 [PATCH v3 00/20] Add support for Silicon Labs WiFi chip WF200 and further Jerome Pouiller
2019-09-19 14:25 ` Jerome Pouiller
2019-09-19 14:25 ` [PATCH v3 01/20] staging: wfx: add infrastructure for new driver Jerome Pouiller
2019-09-19 14:25   ` Jerome Pouiller
2019-10-04  8:23   ` Greg Kroah-Hartman
2019-10-04  8:23     ` Greg Kroah-Hartman
2019-09-19 14:25 ` [PATCH v3 02/20] staging: wfx: add support for I/O access Jerome Pouiller
2019-09-19 14:25   ` Jerome Pouiller
2019-09-19 14:25 ` [PATCH v3 03/20] staging: wfx: add I/O API Jerome Pouiller
2019-09-19 14:25   ` Jerome Pouiller
2019-09-19 14:25 ` [PATCH v3 05/20] staging: wfx: load firmware Jerome Pouiller
2019-09-19 14:25   ` Jerome Pouiller
2019-09-19 14:25 ` [PATCH v3 04/20] staging: wfx: add tracepoints for I/O access Jerome Pouiller
2019-09-19 14:25   ` Jerome Pouiller
2019-09-19 14:25 ` [PATCH v3 06/20] staging: wfx: import HIF API headers Jerome Pouiller
2019-09-19 14:25   ` Jerome Pouiller
2019-09-19 14:25 ` [PATCH v3 07/20] staging: wfx: add IRQ handling Jerome Pouiller
2019-09-19 14:25   ` Jerome Pouiller
2019-09-19 14:25 ` [PATCH v3 08/20] staging: wfx: add tracepoints for HIF Jerome Pouiller
2019-09-19 14:25   ` Jerome Pouiller
2019-09-19 14:25 ` Jerome Pouiller [this message]
2019-09-19 14:25   ` [PATCH v3 09/20] staging: wfx: add support for start-up indication Jerome Pouiller
2019-09-19 14:25 ` [PATCH v3 10/20] staging: wfx: instantiate mac80211 data Jerome Pouiller
2019-09-19 14:25   ` Jerome Pouiller
2019-09-19 14:25 ` [PATCH v3 11/20] staging: wfx: allow to send commands to chip Jerome Pouiller
2019-09-19 14:25   ` Jerome Pouiller
2019-09-19 14:25 ` [PATCH v3 12/20] staging: wfx: add HIF commands helpers Jerome Pouiller
2019-09-19 14:25   ` Jerome Pouiller
2019-09-19 14:25 ` [PATCH v3 13/20] staging: wfx: introduce "secure link" Jerome Pouiller
2019-09-19 14:25   ` Jerome Pouiller
2019-09-19 14:25 ` [PATCH v3 14/20] staging: wfx: setup initial chip configuration Jerome Pouiller
2019-09-19 14:25   ` Jerome Pouiller
2019-09-19 14:25 ` [PATCH v3 15/20] staging: wfx: add debug files and trace debug events Jerome Pouiller
2019-09-19 14:25   ` Jerome Pouiller
2019-09-19 14:25 ` [PATCH v3 16/20] staging: wfx: allow to send 802.11 frames Jerome Pouiller
2019-09-19 14:25   ` Jerome Pouiller
2019-09-19 14:25 ` [PATCH v3 17/20] staging: wfx: allow to receive " Jerome Pouiller
2019-09-19 14:25   ` Jerome Pouiller
2019-09-19 14:25 ` [PATCH v3 18/20] staging: wfx: allow to scan networks Jerome Pouiller
2019-09-19 14:25   ` Jerome Pouiller
2019-09-19 14:25 ` [PATCH v3 19/20] staging: wfx: implement 802.11 key handling Jerome Pouiller
2019-09-19 14:25   ` Jerome Pouiller
2019-09-19 14:25 ` [PATCH v3 20/20] staging: wfx: implement the rest of mac80211 API Jerome Pouiller
2019-09-19 14:25   ` Jerome Pouiller
2019-09-19 14:41 ` [PATCH v3 00/20] Add support for Silicon Labs WiFi chip WF200 and further Greg Kroah-Hartman
2019-09-19 14:41   ` Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190919142527.31797-10-Jerome.Pouiller@silabs.com \
    --to=jerome.pouiller@silabs.com \
    --cc=David.Legoff@silabs.com \
    --cc=davem@davemloft.net \
    --cc=devel@driverdev.osuosl.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=kvalo@codeaurora.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.