[PATCH 4.14 00/59] 4.14.146-stable review

[PATCH 4.14 00/59] 4.14.146-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.14.146 release.
There are 59 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sat 21 Sep 2019 09:44:25 PM UTC.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.146-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.14.146-rc1

Sean Young <sean@mess.org>
    media: technisat-usb2: break out of loop at end of buffer

Christoph Paasch <cpaasch@apple.com>
    tcp: Don't dequeue SYN/FIN-segments from write-queue

Christoph Paasch <cpaasch@apple.com>
    tcp: Reset send_head when removing skb from write-queue

Kees Cook <keescook@chromium.org>
    binfmt_elf: move brk out of mmap when doing direct loader exec

Jann Horn <jannh@google.com>
    floppy: fix usercopy direction

Nathan Chancellor <natechancellor@gmail.com>
    PCI: kirin: Fix section mismatch warning

Joerg Roedel <jroedel@suse.de>
    iommu/amd: Fix race in increase_address_space()

Stuart Hayes <stuart.w.hayes@gmail.com>
    iommu/amd: Flush old domains in kdump kernel

Hillf Danton <hdanton@sina.com>
    keys: Fix missing null pointer check in request_key_auth_describe()

Tianyu Lan <Tianyu.Lan@microsoft.com>
    x86/hyper-v: Fix overflow bug in fill_gva_list()

Peter Zijlstra <peterz@infradead.org>
    x86/uaccess: Don't leak the AC flags into __get_user() argument evaluation

Wenwen Wang <wenwen@cs.uga.edu>
    dmaengine: ti: omap-dma: Add cleanup in omap_dma_probe()

Wenwen Wang <wenwen@cs.uga.edu>
    dmaengine: ti: dma-crossbar: Fix a memory leak bug

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    net: seeq: Fix the function used to release some memory in an error handling path

Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
    tools/power turbostat: fix buffer overrun

Zephaniah E. Loss-Cutler-Hull <zephaniah@gmail.com>
    tools/power x86_energy_perf_policy: Fix argument parsing

Ben Hutchings <ben@decadent.org.uk>
    tools/power x86_energy_perf_policy: Fix "uninitialized variable" warnings at -O2

YueHaibing <yuehaibing@huawei.com>
    amd-xgbe: Fix error path in xgbe_mod_init()

Kim Phillips <kim.phillips@amd.com>
    perf/x86/amd/ibs: Fix sample bias for dispatched micro-ops

Josh Hunt <johunt@akamai.com>
    perf/x86/intel: Restrict period on Nehalem

Jarkko Nikula <jarkko.nikula@linux.intel.com>
    i2c: designware: Synchronize IRQs when unregistering slave client

Takashi Iwai <tiwai@suse.de>
    sky2: Disable MSI on yet another ASUS boards (P6Xxxx)

zhaoyang <huangzhaoyang@gmail.com>
    ARM: 8901/1: add a criteria for pfn_valid of arm

Dan Carpenter <dan.carpenter@oracle.com>
    cifs: Use kzfree() to zero out the password

Ronnie Sahlberg <lsahlber@redhat.com>
    cifs: set domainName when a domain-key is used in multiuser

Marc Zyngier <maz@kernel.org>
    kallsyms: Don't let kallsyms_lookup_size_offset() fail on retrieving the first symbol

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFSv2: Fix write regression

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFSv2: Fix eof handling

Thomas Jarosch <thomas.jarosch@intra2net.com>
    netfilter: nf_conntrack_ftp: Fix debug output

Thomas Gleixner <tglx@linutronix.de>
    x86/apic: Fix arch_dynirq_lower_bound() bug for DT enabled machines

Prashant Malani <pmalani@chromium.org>
    r8152: Set memory to all 0xFFs on failed reg reads

Sven Eckelmann <sven@narfation.org>
    batman-adv: Only read OGM2 tvlv_len after buffer len check

Doug Berger <opendmb@gmail.com>
    ARM: 8874/1: mm: only adjust sections of valid mm structures

Wenwen Wang <wenwen@cs.uga.edu>
    qed: Add cleanup in qed_slowpath_start()

Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    Kconfig: Fix the reference to the IDT77105 Phy driver in the description of ATM_NICSTAR_USE_IDT77105

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFS: Fix initialisation of I/O result struct in nfs_pgio_rpcsetup

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFSv4: Fix return value in nfs_finish_open()

Trond Myklebust <trond.myklebust@hammerspace.com>
    NFSv4: Fix return values for nfs4_file_open()

Juliana Rodrigueiro <juliana.rodrigueiro@intra2net.com>
    netfilter: xt_nfacct: Fix alignment mismatch in xt_nfacct_match_info

Phil Reid <preid@electromag.com.au>
    fpga: altera-ps-spi: Fix getting of optional confd gpio

Ilya Leoshkevich <iii@linux.ibm.com>
    s390/bpf: use 32-bit index for tail calls

Faiz Abbas <faiz_abbas@ti.com>
    ARM: dts: dra74x: Fix iodelay configuration for mmc3

Tony Lindgren <tony@atomide.com>
    ARM: OMAP2+: Fix omap4 errata warning on other SoCs

Ilya Leoshkevich <iii@linux.ibm.com>
    s390/bpf: fix lcgr instruction encoding

Tony Lindgren <tony@atomide.com>
    ARM: OMAP2+: Fix missing SYSC_HAS_RESET_STATUS for dra7 epwmss

Masashi Honma <masashi.honma@gmail.com>
    nl80211: Fix possible Spectre-v1 for CQM RSSI thresholds

Wen Huang <huangwenabc@gmail.com>
    mwifiex: Fix three heap overflow at parsing element in cfg80211_ap_settings

Razvan Stefanescu <razvan.stefanescu@microchip.com>
    tty/serial: atmel: reschedule TX after RX was started

Chunyan Zhang <chunyan.zhang@unisoc.com>
    serial: sprd: correct the wrong sequence of arguments

Hung-Te Lin <hungte@chromium.org>
    firmware: google: check if size is valid when decoding VPD data

Matt Delco <delco@chromium.org>
    KVM: coalesced_mmio: add bounds checking

Cong Wang <xiyou.wangcong@gmail.com>
    net_sched: let qdisc_put() accept NULL pointer

Dongli Zhang <dongli.zhang@oracle.com>
    xen-netfront: do not assume sk_buff_head list is empty in error handling

Sean Young <sean@mess.org>
    media: tm6000: double free if usb disconnect while streaming

Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
    phy: renesas: rcar-gen3-usb2: Disable clearing VBUS in over-current

Alan Stern <stern@rowland.harvard.edu>
    USB: usbcore: Fix slab-out-of-bounds bug during device reset

Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
    powerpc/mm/radix: Use the right page size for vmemmap mapping

Benjamin Tissoires <benjamin.tissoires@redhat.com>
    Input: elan_i2c - remove Lenovo Legion Y7000 PnpID

Aaron Armstrong Skomra <skomra@gmail.com>
    HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report


-------------

Diffstat:

 Makefile                                           |  4 +-
 arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi          | 50 ++++++++++----------
 arch/arm/mach-omap2/omap4-common.c                 |  3 ++
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c          |  3 +-
 arch/arm/mm/init.c                                 |  8 +++-
 arch/powerpc/mm/pgtable-radix.c                    | 16 +++----
 arch/s390/net/bpf_jit_comp.c                       | 12 +++--
 arch/x86/events/amd/ibs.c                          | 13 +++--
 arch/x86/events/intel/core.c                       |  6 +++
 arch/x86/hyperv/mmu.c                              |  8 ++--
 arch/x86/include/asm/perf_event.h                  | 12 +++--
 arch/x86/include/asm/uaccess.h                     |  4 +-
 arch/x86/kernel/apic/io_apic.c                     |  8 +++-
 drivers/atm/Kconfig                                |  2 +-
 drivers/block/floppy.c                             |  4 +-
 drivers/dma/omap-dma.c                             |  4 +-
 drivers/dma/ti-dma-crossbar.c                      |  4 +-
 drivers/firmware/google/vpd.c                      |  4 +-
 drivers/firmware/google/vpd_decode.c               | 55 +++++++++++++---------
 drivers/firmware/google/vpd_decode.h               |  6 +--
 drivers/fpga/altera-ps-spi.c                       | 11 +++--
 drivers/hid/wacom_sys.c                            | 10 ++--
 drivers/hid/wacom_wac.c                            |  4 ++
 drivers/i2c/busses/i2c-designware-slave.c          |  1 +
 drivers/input/mouse/elan_i2c_core.c                |  2 +-
 drivers/iommu/amd_iommu.c                          | 40 ++++++++++++++--
 drivers/media/usb/dvb-usb/technisat-usb2.c         | 22 ++++-----
 drivers/media/usb/tm6000/tm6000-dvb.c              |  3 ++
 drivers/net/ethernet/amd/xgbe/xgbe-main.c          | 10 +++-
 drivers/net/ethernet/marvell/sky2.c                |  7 +++
 drivers/net/ethernet/qlogic/qed/qed_main.c         |  4 +-
 drivers/net/ethernet/seeq/sgiseeq.c                |  7 +--
 drivers/net/usb/r8152.c                            |  5 +-
 drivers/net/wireless/marvell/mwifiex/ie.c          |  3 ++
 drivers/net/wireless/marvell/mwifiex/uap_cmd.c     |  9 +++-
 drivers/net/xen-netfront.c                         |  2 +-
 drivers/pci/dwc/pcie-kirin.c                       |  4 +-
 drivers/phy/renesas/phy-rcar-gen3-usb2.c           |  2 +
 drivers/tty/serial/atmel_serial.c                  |  1 -
 drivers/tty/serial/sprd_serial.c                   |  2 +-
 drivers/usb/core/config.c                          | 12 +++--
 fs/binfmt_elf.c                                    | 11 +++++
 fs/cifs/connect.c                                  | 22 +++++++++
 fs/nfs/dir.c                                       |  2 +-
 fs/nfs/nfs4file.c                                  | 12 ++---
 fs/nfs/pagelist.c                                  |  2 +-
 fs/nfs/proc.c                                      |  7 ++-
 include/uapi/linux/netfilter/xt_nfacct.h           |  5 ++
 kernel/kallsyms.c                                  |  6 ++-
 net/batman-adv/bat_v_ogm.c                         | 18 ++++---
 net/ipv4/tcp.c                                     |  6 +--
 net/netfilter/nf_conntrack_ftp.c                   |  2 +-
 net/netfilter/xt_nfacct.c                          | 36 +++++++++-----
 net/sched/sch_generic.c                            |  3 ++
 net/wireless/nl80211.c                             |  4 +-
 security/keys/request_key_auth.c                   |  6 +++
 tools/power/x86/turbostat/turbostat.c              |  2 +-
 .../x86_energy_perf_policy.c                       | 28 ++++++-----
 virt/kvm/coalesced_mmio.c                          | 17 ++++---
 59 files changed, 391 insertions(+), 185 deletions(-)

[PATCH 4.14 01/59] HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report

[Greg Kroah-Hartman]

From: Aaron Armstrong Skomra <skomra@gmail.com>

commit 184eccd40389df29abefab88092c4ff33191fd0c upstream.

In the generic code path, HID_DG_CONTACTMAX was previously
only read from the second byte of report 0x23.

Another report (0x82) has the HID_DG_CONTACTMAX in the
higher nibble of the third byte. We should support reading the
value of HID_DG_CONTACTMAX no matter what report we are reading
or which position that value is in.

To do this we submit the feature report as a event report
using hid_report_raw_event(). Our modified finger event path
records the value of HID_DG_CONTACTMAX when it sees that usage.

Fixes: 8ffffd5212846 ("HID: wacom: fix timeout on probe for some wacoms")
Signed-off-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hid/wacom_sys.c |   10 ++++++----
 drivers/hid/wacom_wac.c |    4 ++++
 2 files changed, 10 insertions(+), 4 deletions(-)

--- a/drivers/hid/wacom_sys.c
+++ b/drivers/hid/wacom_sys.c
@@ -125,14 +125,16 @@ static void wacom_feature_mapping(struct
 		/* leave touch_max as is if predefined */
 		if (!features->touch_max) {
 			/* read manually */
-			data = kzalloc(2, GFP_KERNEL);
+			n = hid_report_len(field->report);
+			data = hid_alloc_report_buf(field->report, GFP_KERNEL);
 			if (!data)
 				break;
 			data[0] = field->report->id;
 			ret = wacom_get_report(hdev, HID_FEATURE_REPORT,
-						data, 2, WAC_CMD_RETRIES);
-			if (ret == 2) {
-				features->touch_max = data[1];
+					       data, n, WAC_CMD_RETRIES);
+			if (ret == n) {
+				ret = hid_report_raw_event(hdev,
+					HID_FEATURE_REPORT, data, n, 0);
 			} else {
 				features->touch_max = 16;
 				hid_warn(hdev, "wacom_feature_mapping: "
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -2428,6 +2428,7 @@ static void wacom_wac_finger_event(struc
 	struct wacom *wacom = hid_get_drvdata(hdev);
 	struct wacom_wac *wacom_wac = &wacom->wacom_wac;
 	unsigned equivalent_usage = wacom_equivalent_usage(usage->hid);
+	struct wacom_features *features = &wacom->wacom_wac.features;
 
 	switch (equivalent_usage) {
 	case HID_GD_X:
@@ -2448,6 +2449,9 @@ static void wacom_wac_finger_event(struc
 	case HID_DG_TIPSWITCH:
 		wacom_wac->hid_data.tipswitch = value;
 		break;
+	case HID_DG_CONTACTMAX:
+		features->touch_max = value;
+		return;
 	}
 
 

[PATCH 4.14 02/59] Input: elan_i2c - remove Lenovo Legion Y7000 PnpID

[Greg Kroah-Hartman]

From: Benjamin Tissoires <benjamin.tissoires@redhat.com>

commit 0c043d70d04711fe6c380df9065fdc44192c49bf upstream.

Looks like the Bios of the Lenovo Legion Y7000 is using ELAN061B
when the actual device is supposed to be used with hid-multitouch.

Remove it from the list of the supported device, hoping that
no one will complain about the loss in functionality.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=203467
Fixes: 738c06d0e456 ("Input: elan_i2c - add hardware ID for multiple Lenovo laptops")
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/input/mouse/elan_i2c_core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/input/mouse/elan_i2c_core.c
+++ b/drivers/input/mouse/elan_i2c_core.c
@@ -1274,7 +1274,7 @@ static const struct acpi_device_id elan_
 	{ "ELAN0618", 0 },
 	{ "ELAN0619", 0 },
 	{ "ELAN061A", 0 },
-	{ "ELAN061B", 0 },
+/*	{ "ELAN061B", 0 }, not working on the Lenovo Legion Y7000 */
 	{ "ELAN061C", 0 },
 	{ "ELAN061D", 0 },
 	{ "ELAN061E", 0 },

[PATCH 4.14 03/59] powerpc/mm/radix: Use the right page size for vmemmap mapping

[Greg Kroah-Hartman]

From: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>

commit 89a3496e0664577043666791ec07fb731d57c950 upstream.

We use mmu_vmemmap_psize to find the page size for mapping the vmmemap area.
With radix translation, we are suboptimally setting this value to PAGE_SIZE.

We do check for 2M page size support and update mmu_vmemap_psize to use
hugepage size but we suboptimally reset the value to PAGE_SIZE in
radix__early_init_mmu(). This resulted in always mapping vmemmap area with
64K page size.

Fixes: 2bfd65e45e87 ("powerpc/mm/radix: Add radix callbacks for early init routines")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/mm/pgtable-radix.c |   16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)

--- a/arch/powerpc/mm/pgtable-radix.c
+++ b/arch/powerpc/mm/pgtable-radix.c
@@ -442,14 +442,6 @@ void __init radix__early_init_devtree(vo
 	mmu_psize_defs[MMU_PAGE_64K].shift = 16;
 	mmu_psize_defs[MMU_PAGE_64K].ap = 0x5;
 found:
-#ifdef CONFIG_SPARSEMEM_VMEMMAP
-	if (mmu_psize_defs[MMU_PAGE_2M].shift) {
-		/*
-		 * map vmemmap using 2M if available
-		 */
-		mmu_vmemmap_psize = MMU_PAGE_2M;
-	}
-#endif /* CONFIG_SPARSEMEM_VMEMMAP */
 	return;
 }
 
@@ -527,7 +519,13 @@ void __init radix__early_init_mmu(void)
 
 #ifdef CONFIG_SPARSEMEM_VMEMMAP
 	/* vmemmap mapping */
-	mmu_vmemmap_psize = mmu_virtual_psize;
+	if (mmu_psize_defs[MMU_PAGE_2M].shift) {
+		/*
+		 * map vmemmap using 2M if available
+		 */
+		mmu_vmemmap_psize = MMU_PAGE_2M;
+	} else
+		mmu_vmemmap_psize = mmu_virtual_psize;
 #endif
 	/*
 	 * initialize page table size

[PATCH 4.14 04/59] USB: usbcore: Fix slab-out-of-bounds bug during device reset

[Greg Kroah-Hartman]

From: Alan Stern <stern@rowland.harvard.edu>

commit 3dd550a2d36596a1b0ee7955da3b611c031d3873 upstream.

The syzbot fuzzer provoked a slab-out-of-bounds error in the USB core:

BUG: KASAN: slab-out-of-bounds in memcmp+0xa6/0xb0 lib/string.c:904
Read of size 1 at addr ffff8881d175bed6 by task kworker/0:3/2746

CPU: 0 PID: 2746 Comm: kworker/0:3 Not tainted 5.3.0-rc5+ #28
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Workqueue: usb_hub_wq hub_event
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0xca/0x13e lib/dump_stack.c:113
  print_address_description+0x6a/0x32c mm/kasan/report.c:351
  __kasan_report.cold+0x1a/0x33 mm/kasan/report.c:482
  kasan_report+0xe/0x12 mm/kasan/common.c:612
  memcmp+0xa6/0xb0 lib/string.c:904
  memcmp include/linux/string.h:400 [inline]
  descriptors_changed drivers/usb/core/hub.c:5579 [inline]
  usb_reset_and_verify_device+0x564/0x1300 drivers/usb/core/hub.c:5729
  usb_reset_device+0x4c1/0x920 drivers/usb/core/hub.c:5898
  rt2x00usb_probe+0x53/0x7af
drivers/net/wireless/ralink/rt2x00/rt2x00usb.c:806

The error occurs when the descriptors_changed() routine (called during
a device reset) attempts to compare the old and new BOS and capability
descriptors.  The length it uses for the comparison is the
wTotalLength value stored in BOS descriptor, but this value is not
necessarily the same as the length actually allocated for the
descriptors.  If it is larger the routine will call memcmp() with a
length that is too big, thus reading beyond the end of the allocated
region and leading to this fault.

The kernel reads the BOS descriptor twice: first to get the total
length of all the capability descriptors, and second to read it along
with all those other descriptors.  A malicious (or very faulty) device
may send different values for the BOS descriptor fields each time.
The memory area will be allocated using the wTotalLength value read
the first time, but stored within it will be the value read the second
time.

To prevent this possibility from causing any errors, this patch
modifies the BOS descriptor after it has been read the second time:
It sets the wTotalLength field to the actual length of the descriptors
that were read in and validated.  Then the memcpy() call, or any other
code using these descriptors, will be able to rely on wTotalLength
being valid.

Reported-and-tested-by: syzbot+35f4d916c623118d576e@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1909041154260.1722-100000@iolanthe.rowland.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/core/config.c |   12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -925,7 +925,7 @@ int usb_get_bos_descriptor(struct usb_de
 	struct usb_bos_descriptor *bos;
 	struct usb_dev_cap_header *cap;
 	struct usb_ssp_cap_descriptor *ssp_cap;
-	unsigned char *buffer;
+	unsigned char *buffer, *buffer0;
 	int length, total_len, num, i, ssac;
 	__u8 cap_type;
 	int ret;
@@ -970,10 +970,12 @@ int usb_get_bos_descriptor(struct usb_de
 			ret = -ENOMSG;
 		goto err;
 	}
+
+	buffer0 = buffer;
 	total_len -= length;
+	buffer += length;
 
 	for (i = 0; i < num; i++) {
-		buffer += length;
 		cap = (struct usb_dev_cap_header *)buffer;
 
 		if (total_len < sizeof(*cap) || total_len < cap->bLength) {
@@ -987,8 +989,6 @@ int usb_get_bos_descriptor(struct usb_de
 			break;
 		}
 
-		total_len -= length;
-
 		if (cap->bDescriptorType != USB_DT_DEVICE_CAPABILITY) {
 			dev_warn(ddev, "descriptor type invalid, skip\n");
 			continue;
@@ -1023,7 +1023,11 @@ int usb_get_bos_descriptor(struct usb_de
 		default:
 			break;
 		}
+
+		total_len -= length;
+		buffer += length;
 	}
+	dev->bos->desc->wTotalLength = cpu_to_le16(buffer - buffer0);
 
 	return 0;
 

[PATCH 4.14 05/59] phy: renesas: rcar-gen3-usb2: Disable clearing VBUS in over-current

[Greg Kroah-Hartman]

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

commit e6839c31a608e79f2057fab987dd814f5d3477e6 upstream.

The hardware manual should be revised, but the initial value of
VBCTRL.OCCLREN is set to 1 actually. If the bit is set, the hardware
clears VBCTRL.VBOUT and ADPCTRL.DRVVBUS registers automatically
when the hardware detects over-current signal from a USB power switch.
However, since the hardware doesn't have any registers which
indicates over-current, the driver cannot handle it at all. So, if
"is_otg_channel" hardware detects over-current, since ADPCTRL.DRVVBUS
register is cleared automatically, the channel cannot be used after
that.

To resolve this behavior, this patch sets the VBCTRL.OCCLREN to 0
to keep ADPCTRL.DRVVBUS even if the "is_otg_channel" hardware
detects over-current. (We assume a USB power switch itself protects
over-current and turns the VBUS off.)

This patch is inspired by a BSP patch from Kazuya Mizuguchi.

Fixes: 1114e2d31731 ("phy: rcar-gen3-usb2: change the mode to OTG on the combined channel")
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/phy/renesas/phy-rcar-gen3-usb2.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
@@ -64,6 +64,7 @@
 					 USB2_OBINT_IDDIGCHG)
 
 /* VBCTRL */
+#define USB2_VBCTRL_OCCLREN		BIT(16)
 #define USB2_VBCTRL_DRVVBUSSEL		BIT(8)
 
 /* LINECTRL1 */
@@ -278,6 +279,7 @@ static void rcar_gen3_init_otg(struct rc
 	u32 val;
 
 	val = readl(usb2_base + USB2_VBCTRL);
+	val &= ~USB2_VBCTRL_OCCLREN;
 	writel(val | USB2_VBCTRL_DRVVBUSSEL, usb2_base + USB2_VBCTRL);
 	writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA);
 	val = readl(usb2_base + USB2_OBINTEN);

[PATCH 4.14 06/59] media: tm6000: double free if usb disconnect while streaming

[Greg Kroah-Hartman]

From: Sean Young <sean@mess.org>

commit 699bf94114151aae4dceb2d9dbf1a6312839dcae upstream.

The usb_bulk_urb will kfree'd on disconnect, so ensure the pointer is set
to NULL after each free.

stop stream
urb killing
urb buffer free
tm6000: got start feed request tm6000_start_feed
tm6000: got start stream request tm6000_start_stream
tm6000: pipe reset
tm6000: got start feed request tm6000_start_feed
tm6000: got start feed request tm6000_start_feed
tm6000: got start feed request tm6000_start_feed
tm6000: got start feed request tm6000_start_feed
tm6000: IR URB failure: status: -71, length 0
xhci_hcd 0000:00:14.0: ERROR unknown event type 37
xhci_hcd 0000:00:14.0: ERROR unknown event type 37
tm6000:  error tm6000_urb_received
usb 1-2: USB disconnect, device number 5
tm6000: disconnecting tm6000 #0
==================================================================
BUG: KASAN: use-after-free in dvb_fini+0x75/0x140 [tm6000_dvb]
Read of size 8 at addr ffff888241044060 by task kworker/2:0/22

CPU: 2 PID: 22 Comm: kworker/2:0 Tainted: G        W         5.3.0-rc4+ #1
Hardware name: LENOVO 20KHCTO1WW/20KHCTO1WW, BIOS N23ET65W (1.40 ) 07/02/2019
Workqueue: usb_hub_wq hub_event
Call Trace:
 dump_stack+0x9a/0xf0
 print_address_description.cold+0xae/0x34f
 __kasan_report.cold+0x75/0x93
 ? tm6000_fillbuf+0x390/0x3c0 [tm6000_alsa]
 ? dvb_fini+0x75/0x140 [tm6000_dvb]
 kasan_report+0xe/0x12
 dvb_fini+0x75/0x140 [tm6000_dvb]
 tm6000_close_extension+0x51/0x80 [tm6000]
 tm6000_usb_disconnect.cold+0xd4/0x105 [tm6000]
 usb_unbind_interface+0xe4/0x390
 device_release_driver_internal+0x121/0x250
 bus_remove_device+0x197/0x260
 device_del+0x268/0x550
 ? __device_links_no_driver+0xd0/0xd0
 ? usb_remove_ep_devs+0x30/0x3b
 usb_disable_device+0x122/0x400
 usb_disconnect+0x153/0x430
 hub_event+0x800/0x1e40
 ? trace_hardirqs_on_thunk+0x1a/0x20
 ? hub_port_debounce+0x1f0/0x1f0
 ? retint_kernel+0x10/0x10
 ? lock_is_held_type+0xf1/0x130
 ? hub_port_debounce+0x1f0/0x1f0
 ? process_one_work+0x4ae/0xa00
 process_one_work+0x4ba/0xa00
 ? pwq_dec_nr_in_flight+0x160/0x160
 ? do_raw_spin_lock+0x10a/0x1d0
 worker_thread+0x7a/0x5c0
 ? process_one_work+0xa00/0xa00
 kthread+0x1d5/0x200
 ? kthread_create_worker_on_cpu+0xd0/0xd0
 ret_from_fork+0x3a/0x50

Allocated by task 2682:
 save_stack+0x1b/0x80
 __kasan_kmalloc.constprop.0+0xc2/0xd0
 usb_alloc_urb+0x28/0x60
 tm6000_start_feed+0x10a/0x300 [tm6000_dvb]
 dmx_ts_feed_start_filtering+0x86/0x120 [dvb_core]
 dvb_dmxdev_start_feed+0x121/0x180 [dvb_core]
 dvb_dmxdev_filter_start+0xcb/0x540 [dvb_core]
 dvb_demux_do_ioctl+0x7ed/0x890 [dvb_core]
 dvb_usercopy+0x97/0x1f0 [dvb_core]
 dvb_demux_ioctl+0x11/0x20 [dvb_core]
 do_vfs_ioctl+0x5d8/0x9d0
 ksys_ioctl+0x5e/0x90
 __x64_sys_ioctl+0x3d/0x50
 do_syscall_64+0x74/0xe0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 22:
 save_stack+0x1b/0x80
 __kasan_slab_free+0x12c/0x170
 kfree+0xfd/0x3a0
 xhci_giveback_urb_in_irq+0xfe/0x230
 xhci_td_cleanup+0x276/0x340
 xhci_irq+0x1129/0x3720
 __handle_irq_event_percpu+0x6e/0x420
 handle_irq_event_percpu+0x6f/0x100
 handle_irq_event+0x55/0x84
 handle_edge_irq+0x108/0x3b0
 handle_irq+0x2e/0x40
 do_IRQ+0x83/0x1a0

Cc: stable@vger.kernel.org
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/tm6000/tm6000-dvb.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/media/usb/tm6000/tm6000-dvb.c
+++ b/drivers/media/usb/tm6000/tm6000-dvb.c
@@ -105,6 +105,7 @@ static void tm6000_urb_received(struct u
 			printk(KERN_ERR "tm6000:  error %s\n", __func__);
 			kfree(urb->transfer_buffer);
 			usb_free_urb(urb);
+			dev->dvb->bulk_urb = NULL;
 		}
 	}
 }
@@ -135,6 +136,7 @@ static int tm6000_start_stream(struct tm
 	dvb->bulk_urb->transfer_buffer = kzalloc(size, GFP_KERNEL);
 	if (dvb->bulk_urb->transfer_buffer == NULL) {
 		usb_free_urb(dvb->bulk_urb);
+		dvb->bulk_urb = NULL;
 		printk(KERN_ERR "tm6000: couldn't allocate transfer buffer!\n");
 		return -ENOMEM;
 	}
@@ -162,6 +164,7 @@ static int tm6000_start_stream(struct tm
 
 		kfree(dvb->bulk_urb->transfer_buffer);
 		usb_free_urb(dvb->bulk_urb);
+		dvb->bulk_urb = NULL;
 		return ret;
 	}
 

[PATCH 4.14 07/59] xen-netfront: do not assume sk_buff_head list is empty in error handling

[Greg Kroah-Hartman]

From: Dongli Zhang <dongli.zhang@oracle.com>

[ Upstream commit 00b368502d18f790ab715e055869fd4bb7484a9b ]

When skb_shinfo(skb) is not able to cache extra fragment (that is,
skb_shinfo(skb)->nr_frags >= MAX_SKB_FRAGS), xennet_fill_frags() assumes
the sk_buff_head list is already empty. As a result, cons is increased only
by 1 and returns to error handling path in xennet_poll().

However, if the sk_buff_head list is not empty, queue->rx.rsp_cons may be
set incorrectly. That is, queue->rx.rsp_cons would point to the rx ring
buffer entries whose queue->rx_skbs[i] and queue->grant_rx_ref[i] are
already cleared to NULL. This leads to NULL pointer access in the next
iteration to process rx ring buffer entries.

Below is how xennet_poll() does error handling. All remaining entries in
tmpq are accounted to queue->rx.rsp_cons without assuming how many
outstanding skbs are remained in the list.

 985 static int xennet_poll(struct napi_struct *napi, int budget)
... ...
1032           if (unlikely(xennet_set_skb_gso(skb, gso))) {
1033                   __skb_queue_head(&tmpq, skb);
1034                   queue->rx.rsp_cons += skb_queue_len(&tmpq);
1035                   goto err;
1036           }

It is better to always have the error handling in the same way.

Fixes: ad4f15dc2c70 ("xen/netfront: don't bug in case of too many frags")
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/xen-netfront.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -908,7 +908,7 @@ static RING_IDX xennet_fill_frags(struct
 			__pskb_pull_tail(skb, pull_to - skb_headlen(skb));
 		}
 		if (unlikely(skb_shinfo(skb)->nr_frags >= MAX_SKB_FRAGS)) {
-			queue->rx.rsp_cons = ++cons;
+			queue->rx.rsp_cons = ++cons + skb_queue_len(list);
 			kfree_skb(nskb);
 			return ~0U;
 		}

[PATCH 4.14 08/59] net_sched: let qdisc_put() accept NULL pointer

[Greg Kroah-Hartman]

From: Cong Wang <xiyou.wangcong@gmail.com>

[ Upstream commit 6efb971ba8edfbd80b666f29de12882852f095ae ]

When tcf_block_get() fails in sfb_init(), q->qdisc is still a NULL
pointer which leads to a crash in sfb_destroy(). Similar for
sch_dsmark.

Instead of fixing each separately, Linus suggested to just accept
NULL pointer in qdisc_put(), which would make callers easier.

(For sch_dsmark, the bug probably exists long before commit
6529eaba33f0.)

Fixes: 6529eaba33f0 ("net: sched: introduce tcf block infractructure")
Reported-by: syzbot+d5870a903591faaca4ae@syzkaller.appspotmail.com
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/sch_generic.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -705,6 +705,9 @@ void qdisc_destroy(struct Qdisc *qdisc)
 {
 	const struct Qdisc_ops  *ops = qdisc->ops;
 
+	if (!qdisc)
+		return;
+
 	if (qdisc->flags & TCQ_F_BUILTIN ||
 	    !refcount_dec_and_test(&qdisc->refcnt))
 		return;

[PATCH 4.14 09/59] KVM: coalesced_mmio: add bounds checking

[Greg Kroah-Hartman]

From: Matt Delco <delco@chromium.org>

commit b60fe990c6b07ef6d4df67bc0530c7c90a62623a upstream.

The first/last indexes are typically shared with a user app.
The app can change the 'last' index that the kernel uses
to store the next result.  This change sanity checks the index
before using it for writing to a potentially arbitrary address.

This fixes CVE-2019-14821.

Cc: stable@vger.kernel.org
Fixes: 5f94c1741bdc ("KVM: Add coalesced MMIO support (common part)")
Signed-off-by: Matt Delco <delco@chromium.org>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reported-by: syzbot+983c866c3dd6efa3662a@syzkaller.appspotmail.com
[Use READ_ONCE. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 virt/kvm/coalesced_mmio.c |   17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

--- a/virt/kvm/coalesced_mmio.c
+++ b/virt/kvm/coalesced_mmio.c
@@ -40,7 +40,7 @@ static int coalesced_mmio_in_range(struc
 	return 1;
 }
 
-static int coalesced_mmio_has_room(struct kvm_coalesced_mmio_dev *dev)
+static int coalesced_mmio_has_room(struct kvm_coalesced_mmio_dev *dev, u32 last)
 {
 	struct kvm_coalesced_mmio_ring *ring;
 	unsigned avail;
@@ -52,7 +52,7 @@ static int coalesced_mmio_has_room(struc
 	 * there is always one unused entry in the buffer
 	 */
 	ring = dev->kvm->coalesced_mmio_ring;
-	avail = (ring->first - ring->last - 1) % KVM_COALESCED_MMIO_MAX;
+	avail = (ring->first - last - 1) % KVM_COALESCED_MMIO_MAX;
 	if (avail == 0) {
 		/* full */
 		return 0;
@@ -67,24 +67,27 @@ static int coalesced_mmio_write(struct k
 {
 	struct kvm_coalesced_mmio_dev *dev = to_mmio(this);
 	struct kvm_coalesced_mmio_ring *ring = dev->kvm->coalesced_mmio_ring;
+	__u32 insert;
 
 	if (!coalesced_mmio_in_range(dev, addr, len))
 		return -EOPNOTSUPP;
 
 	spin_lock(&dev->kvm->ring_lock);
 
-	if (!coalesced_mmio_has_room(dev)) {
+	insert = READ_ONCE(ring->last);
+	if (!coalesced_mmio_has_room(dev, insert) ||
+	    insert >= KVM_COALESCED_MMIO_MAX) {
 		spin_unlock(&dev->kvm->ring_lock);
 		return -EOPNOTSUPP;
 	}
 
 	/* copy data in first free entry of the ring */
 
-	ring->coalesced_mmio[ring->last].phys_addr = addr;
-	ring->coalesced_mmio[ring->last].len = len;
-	memcpy(ring->coalesced_mmio[ring->last].data, val, len);
+	ring->coalesced_mmio[insert].phys_addr = addr;
+	ring->coalesced_mmio[insert].len = len;
+	memcpy(ring->coalesced_mmio[insert].data, val, len);
 	smp_wmb();
-	ring->last = (ring->last + 1) % KVM_COALESCED_MMIO_MAX;
+	ring->last = (insert + 1) % KVM_COALESCED_MMIO_MAX;
 	spin_unlock(&dev->kvm->ring_lock);
 	return 0;
 }

[PATCH 4.14 10/59] firmware: google: check if size is valid when decoding VPD data

[Greg Kroah-Hartman]

From: Hung-Te Lin <hungte@chromium.org>

commit 4b708b7b1a2c09fbdfff6b942ebe3a160213aacd upstream.

The VPD implementation from Chromium Vital Product Data project used to
parse data from untrusted input without checking if the meta data is
invalid or corrupted. For example, the size from decoded content may
be negative value, or larger than whole input buffer. Such invalid data
may cause buffer overflow.

To fix that, the size parameters passed to vpd_decode functions should
be changed to unsigned integer (u32) type, and the parsing of entry
header should be refactored so every size field is correctly verified
before starting to decode.

Fixes: ad2ac9d5c5e0 ("firmware: Google VPD: import lib_vpd source files")
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20190830022402.214442-1-hungte@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/firmware/google/vpd.c        |    4 +-
 drivers/firmware/google/vpd_decode.c |   55 ++++++++++++++++++++---------------
 drivers/firmware/google/vpd_decode.h |    6 +--
 3 files changed, 37 insertions(+), 28 deletions(-)

--- a/drivers/firmware/google/vpd.c
+++ b/drivers/firmware/google/vpd.c
@@ -100,8 +100,8 @@ static int vpd_section_check_key_name(co
 	return VPD_OK;
 }
 
-static int vpd_section_attrib_add(const u8 *key, s32 key_len,
-				  const u8 *value, s32 value_len,
+static int vpd_section_attrib_add(const u8 *key, u32 key_len,
+				  const u8 *value, u32 value_len,
 				  void *arg)
 {
 	int ret;
--- a/drivers/firmware/google/vpd_decode.c
+++ b/drivers/firmware/google/vpd_decode.c
@@ -19,8 +19,8 @@
 
 #include "vpd_decode.h"
 
-static int vpd_decode_len(const s32 max_len, const u8 *in,
-			  s32 *length, s32 *decoded_len)
+static int vpd_decode_len(const u32 max_len, const u8 *in,
+			  u32 *length, u32 *decoded_len)
 {
 	u8 more;
 	int i = 0;
@@ -40,18 +40,39 @@ static int vpd_decode_len(const s32 max_
 	} while (more);
 
 	*decoded_len = i;
+	return VPD_OK;
+}
+
+static int vpd_decode_entry(const u32 max_len, const u8 *input_buf,
+			    u32 *_consumed, const u8 **entry, u32 *entry_len)
+{
+	u32 decoded_len;
+	u32 consumed = *_consumed;
 
+	if (vpd_decode_len(max_len - consumed, &input_buf[consumed],
+			   entry_len, &decoded_len) != VPD_OK)
+		return VPD_FAIL;
+	if (max_len - consumed < decoded_len)
+		return VPD_FAIL;
+
+	consumed += decoded_len;
+	*entry = input_buf + consumed;
+
+	/* entry_len is untrusted data and must be checked again. */
+	if (max_len - consumed < *entry_len)
+		return VPD_FAIL;
+
+	consumed += decoded_len;
+	*_consumed = consumed;
 	return VPD_OK;
 }
 
-int vpd_decode_string(const s32 max_len, const u8 *input_buf, s32 *consumed,
+int vpd_decode_string(const u32 max_len, const u8 *input_buf, u32 *consumed,
 		      vpd_decode_callback callback, void *callback_arg)
 {
 	int type;
-	int res;
-	s32 key_len;
-	s32 value_len;
-	s32 decoded_len;
+	u32 key_len;
+	u32 value_len;
 	const u8 *key;
 	const u8 *value;
 
@@ -66,26 +87,14 @@ int vpd_decode_string(const s32 max_len,
 	case VPD_TYPE_STRING:
 		(*consumed)++;
 
-		/* key */
-		res = vpd_decode_len(max_len - *consumed, &input_buf[*consumed],
-				     &key_len, &decoded_len);
-		if (res != VPD_OK || *consumed + decoded_len >= max_len)
+		if (vpd_decode_entry(max_len, input_buf, consumed, &key,
+				     &key_len) != VPD_OK)
 			return VPD_FAIL;
 
-		*consumed += decoded_len;
-		key = &input_buf[*consumed];
-		*consumed += key_len;
-
-		/* value */
-		res = vpd_decode_len(max_len - *consumed, &input_buf[*consumed],
-				     &value_len, &decoded_len);
-		if (res != VPD_OK || *consumed + decoded_len > max_len)
+		if (vpd_decode_entry(max_len, input_buf, consumed, &value,
+				     &value_len) != VPD_OK)
 			return VPD_FAIL;
 
-		*consumed += decoded_len;
-		value = &input_buf[*consumed];
-		*consumed += value_len;
-
 		if (type == VPD_TYPE_STRING)
 			return callback(key, key_len, value, value_len,
 					callback_arg);
--- a/drivers/firmware/google/vpd_decode.h
+++ b/drivers/firmware/google/vpd_decode.h
@@ -33,8 +33,8 @@ enum {
 };
 
 /* Callback for vpd_decode_string to invoke. */
-typedef int vpd_decode_callback(const u8 *key, s32 key_len,
-				const u8 *value, s32 value_len,
+typedef int vpd_decode_callback(const u8 *key, u32 key_len,
+				const u8 *value, u32 value_len,
 				void *arg);
 
 /*
@@ -52,7 +52,7 @@ typedef int vpd_decode_callback(const u8
  * If one entry is successfully decoded, sends it to callback and returns the
  * result.
  */
-int vpd_decode_string(const s32 max_len, const u8 *input_buf, s32 *consumed,
+int vpd_decode_string(const u32 max_len, const u8 *input_buf, u32 *consumed,
 		      vpd_decode_callback callback, void *callback_arg);
 
 #endif  /* __VPD_DECODE_H */

[PATCH 4.14 11/59] serial: sprd: correct the wrong sequence of arguments

[Greg Kroah-Hartman]

From: Chunyan Zhang <chunyan.zhang@unisoc.com>

commit 9c801e313195addaf11c16e155f50789d6ebfd19 upstream.

The sequence of arguments which was passed to handle_lsr_errors() didn't
match the parameters defined in that function, &lsr was passed to flag
and &flag was passed to lsr, this patch fixed that.

Fixes: b7396a38fb28 ("tty/serial: Add Spreadtrum sc9836-uart driver support")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190905074151.5268-1-zhang.lyra@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/sprd_serial.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/tty/serial/sprd_serial.c
+++ b/drivers/tty/serial/sprd_serial.c
@@ -240,7 +240,7 @@ static inline void sprd_rx(struct uart_p
 
 		if (lsr & (SPRD_LSR_BI | SPRD_LSR_PE |
 			SPRD_LSR_FE | SPRD_LSR_OE))
-			if (handle_lsr_errors(port, &lsr, &flag))
+			if (handle_lsr_errors(port, &flag, &lsr))
 				continue;
 		if (uart_handle_sysrq_char(port, ch))
 			continue;

[PATCH 4.14 12/59] tty/serial: atmel: reschedule TX after RX was started

[Greg Kroah-Hartman]

From: Razvan Stefanescu <razvan.stefanescu@microchip.com>

commit d2ace81bf902a9f11d52e59e5d232d2255a0e353 upstream.

When half-duplex RS485 communication is used, after RX is started, TX
tasklet still needs to be  scheduled tasklet. This avoids console freezing
when more data is to be transmitted, if the serial communication is not
closed.

Fixes: 69646d7a3689 ("tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stopped")
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190813074025.16218-1-razvan.stefanescu@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/atmel_serial.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1276,7 +1276,6 @@ atmel_handle_transmit(struct uart_port *
 
 			atmel_port->hd_start_rx = false;
 			atmel_start_rx(port);
-			return;
 		}
 
 		atmel_tasklet_schedule(atmel_port, &atmel_port->tasklet_tx);

[PATCH 4.14 13/59] mwifiex: Fix three heap overflow at parsing element in cfg80211_ap_settings

[Greg Kroah-Hartman]

From: Wen Huang <huangwenabc@gmail.com>

commit 7caac62ed598a196d6ddf8d9c121e12e082cac3a upstream.

mwifiex_update_vs_ie(),mwifiex_set_uap_rates() and
mwifiex_set_wmm_params() call memcpy() without checking
the destination size.Since the source is given from
user-space, this may trigger a heap buffer overflow.

Fix them by putting the length check before performing memcpy().

This fix addresses CVE-2019-14814,CVE-2019-14815,CVE-2019-14816.

Signed-off-by: Wen Huang <huangwenabc@gmail.com>
Acked-by: Ganapathi Bhat <gbhat@marvell.comg>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/marvell/mwifiex/ie.c      |    3 +++
 drivers/net/wireless/marvell/mwifiex/uap_cmd.c |    9 ++++++++-
 2 files changed, 11 insertions(+), 1 deletion(-)

--- a/drivers/net/wireless/marvell/mwifiex/ie.c
+++ b/drivers/net/wireless/marvell/mwifiex/ie.c
@@ -241,6 +241,9 @@ static int mwifiex_update_vs_ie(const u8
 		}
 
 		vs_ie = (struct ieee_types_header *)vendor_ie;
+		if (le16_to_cpu(ie->ie_length) + vs_ie->len + 2 >
+			IEEE_MAX_IE_SIZE)
+			return -EINVAL;
 		memcpy(ie->ie_buffer + le16_to_cpu(ie->ie_length),
 		       vs_ie, vs_ie->len + 2);
 		le16_unaligned_add_cpu(&ie->ie_length, vs_ie->len + 2);
--- a/drivers/net/wireless/marvell/mwifiex/uap_cmd.c
+++ b/drivers/net/wireless/marvell/mwifiex/uap_cmd.c
@@ -265,6 +265,8 @@ mwifiex_set_uap_rates(struct mwifiex_uap
 
 	rate_ie = (void *)cfg80211_find_ie(WLAN_EID_SUPP_RATES, var_pos, len);
 	if (rate_ie) {
+		if (rate_ie->len > MWIFIEX_SUPPORTED_RATES)
+			return;
 		memcpy(bss_cfg->rates, rate_ie + 1, rate_ie->len);
 		rate_len = rate_ie->len;
 	}
@@ -272,8 +274,11 @@ mwifiex_set_uap_rates(struct mwifiex_uap
 	rate_ie = (void *)cfg80211_find_ie(WLAN_EID_EXT_SUPP_RATES,
 					   params->beacon.tail,
 					   params->beacon.tail_len);
-	if (rate_ie)
+	if (rate_ie) {
+		if (rate_ie->len > MWIFIEX_SUPPORTED_RATES - rate_len)
+			return;
 		memcpy(bss_cfg->rates + rate_len, rate_ie + 1, rate_ie->len);
+	}
 
 	return;
 }
@@ -391,6 +396,8 @@ mwifiex_set_wmm_params(struct mwifiex_pr
 					    params->beacon.tail_len);
 	if (vendor_ie) {
 		wmm_ie = vendor_ie;
+		if (*(wmm_ie + 1) > sizeof(struct mwifiex_types_wmm_info))
+			return;
 		memcpy(&bss_cfg->wmm_info, wmm_ie +
 		       sizeof(struct ieee_types_header), *(wmm_ie + 1));
 		priv->wmm_enabled = 1;

[PATCH 4.14 14/59] nl80211: Fix possible Spectre-v1 for CQM RSSI thresholds

[Greg Kroah-Hartman]

From: Masashi Honma <masashi.honma@gmail.com>

commit 4b2c5a14cd8005a900075f7dfec87473c6ee66fb upstream.

commit 1222a1601488 ("nl80211: Fix possible Spectre-v1 for CQM
RSSI thresholds") was incomplete and requires one more fix to
prevent accessing to rssi_thresholds[n] because user can control
rssi_thresholds[i] values to make i reach to n. For example,
rssi_thresholds = {-400, -300, -200, -100} when last is -34.

Cc: stable@vger.kernel.org
Fixes: 1222a1601488 ("nl80211: Fix possible Spectre-v1 for CQM RSSI thresholds")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Link: https://lore.kernel.org/r/20190908005653.17433-1-masashi.honma@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/wireless/nl80211.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -9753,9 +9753,11 @@ static int cfg80211_cqm_rssi_update(stru
 	hyst = wdev->cqm_config->rssi_hyst;
 	n = wdev->cqm_config->n_rssi_thresholds;
 
-	for (i = 0; i < n; i++)
+	for (i = 0; i < n; i++) {
+		i = array_index_nospec(i, n);
 		if (last < wdev->cqm_config->rssi_thresholds[i])
 			break;
+	}
 
 	low_index = i - 1;
 	if (low_index >= 0) {

[PATCH 4.14 15/59] ARM: OMAP2+: Fix missing SYSC_HAS_RESET_STATUS for dra7 epwmss

[Greg Kroah-Hartman]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit afd58b162e48076e3fe66d08a69eefbd6fe71643 ]

TRM says PWMSS_SYSCONFIG bit for SOFTRESET changes to zero when
reset is completed. Let's configure it as otherwise we get warnings
on boot when we check the data against dts provided data. Eventually
the legacy platform data will be just dropped, but let's fix the
warning first.

Reviewed-by: Suman Anna <s-anna@ti.com>
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 2f4f7002f38d0..87b0c38b7ca59 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -389,7 +389,8 @@ static struct omap_hwmod dra7xx_dcan2_hwmod = {
 static struct omap_hwmod_class_sysconfig dra7xx_epwmss_sysc = {
 	.rev_offs	= 0x0,
 	.sysc_offs	= 0x4,
-	.sysc_flags	= SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET,
+	.sysc_flags	= SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			  SYSC_HAS_RESET_STATUS,
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
 	.sysc_fields	= &omap_hwmod_sysc_type2,
 };
-- 
2.20.1

[PATCH 4.14 16/59] s390/bpf: fix lcgr instruction encoding

[Greg Kroah-Hartman]

From: Ilya Leoshkevich <iii@linux.ibm.com>

[ Upstream commit bb2d267c448f4bc3a3389d97c56391cb779178ae ]

"masking, test in bounds 3" fails on s390, because
BPF_ALU64_IMM(BPF_NEG, BPF_REG_2, 0) ignores the top 32 bits of
BPF_REG_2. The reason is that JIT emits lcgfr instead of lcgr.
The associated comment indicates that the code was intended to
emit lcgr in the first place, it's just that the wrong opcode
was used.

Fix by using the correct opcode.

Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/net/bpf_jit_comp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c
index bc9431aace05d..fcb9e840727cd 100644
--- a/arch/s390/net/bpf_jit_comp.c
+++ b/arch/s390/net/bpf_jit_comp.c
@@ -882,7 +882,7 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i
 		break;
 	case BPF_ALU64 | BPF_NEG: /* dst = -dst */
 		/* lcgr %dst,%dst */
-		EMIT4(0xb9130000, dst_reg, dst_reg);
+		EMIT4(0xb9030000, dst_reg, dst_reg);
 		break;
 	/*
 	 * BPF_FROM_BE/LE
-- 
2.20.1

[PATCH 4.14 17/59] ARM: OMAP2+: Fix omap4 errata warning on other SoCs

[Greg Kroah-Hartman]

From: Tony Lindgren <tony@atomide.com>

[ Upstream commit 45da5e09dd32fa98c32eaafe2513db6bd75e2f4f ]

We have errata i688 workaround produce warnings on SoCs other than
omap4 and omap5:

omap4_sram_init:Unable to allocate sram needed to handle errata I688
omap4_sram_init:Unable to get sram pool needed to handle errata I688

This is happening because there is no ti,omap4-mpu node, or no SRAM
to configure for the other SoCs, so let's remove the warning based
on the SoC revision checks.

As nobody has complained it seems that the other SoC variants do not
need this workaround.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-omap2/omap4-common.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index cf65ab8bb0046..e5dcbda20129d 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -131,6 +131,9 @@ static int __init omap4_sram_init(void)
 	struct device_node *np;
 	struct gen_pool *sram_pool;
 
+	if (!soc_is_omap44xx() && !soc_is_omap54xx())
+		return 0;
+
 	np = of_find_compatible_node(NULL, NULL, "ti,omap4-mpu");
 	if (!np)
 		pr_warn("%s:Unable to allocate sram needed to handle errata I688\n",
-- 
2.20.1

[PATCH 4.14 18/59] ARM: dts: dra74x: Fix iodelay configuration for mmc3

[Greg Kroah-Hartman]

From: Faiz Abbas <faiz_abbas@ti.com>

[ Upstream commit 07f9a8be66a9bd86f9eaedf8f8aeb416195adab8 ]

According to the latest am572x[1] and dra74x[2] data manuals, mmc3
default, hs, sdr12 and sdr25 modes use iodelay values given in
MMC3_MANUAL1. Set the MODE_SELECT bit for these so that manual mode is
selected and correct iodelay values can be configured.

[1] http://www.ti.com/lit/ds/symlink/am5728.pdf
[2] http://www.ti.com/lit/ds/symlink/dra746.pdf

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi | 50 +++++++++++------------
 1 file changed, 25 insertions(+), 25 deletions(-)

diff --git a/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi
index 28ebb4eb884a9..214b9e6de2c35 100644
--- a/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi
+++ b/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi
@@ -32,7 +32,7 @@
  *
  * Datamanual Revisions:
  *
- * AM572x Silicon Revision 2.0: SPRS953B, Revised November 2016
+ * AM572x Silicon Revision 2.0: SPRS953F, Revised May 2019
  * AM572x Silicon Revision 1.1: SPRS915R, Revised November 2016
  *
  */
@@ -229,45 +229,45 @@
 
 	mmc3_pins_default: mmc3_pins_default {
 		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
-			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
-			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
-			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
-			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
-			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
 		>;
 	};
 
 	mmc3_pins_hs: mmc3_pins_hs {
 		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
-			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
-			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
-			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
-			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
-			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
 		>;
 	};
 
 	mmc3_pins_sdr12: mmc3_pins_sdr12 {
 		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
-			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
-			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
-			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
-			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
-			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
 		>;
 	};
 
 	mmc3_pins_sdr25: mmc3_pins_sdr25 {
 		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
-			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
-			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
-			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
-			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
-			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
 		>;
 	};
 
-- 
2.20.1

[PATCH 4.14 19/59] s390/bpf: use 32-bit index for tail calls

[Greg Kroah-Hartman]

From: Ilya Leoshkevich <iii@linux.ibm.com>

[ Upstream commit 91b4db5313a2c793aabc2143efb8ed0cf0fdd097 ]

"p runtime/jit: pass > 32bit index to tail_call" fails when
bpf_jit_enable=1, because the tail call is not executed.

This in turn is because the generated code assumes index is 64-bit,
while it must be 32-bit, and as a result prog array bounds check fails,
while it should pass. Even if bounds check would have passed, the code
that follows uses 64-bit index to compute prog array offset.

Fix by using clrj instead of clgrj for comparing index with array size,
and also by using llgfr for truncating index to 32 bits before using it
to compute prog array offset.

Fixes: 6651ee070b31 ("s390/bpf: implement bpf_tail_call() helper")
Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/s390/net/bpf_jit_comp.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c
index fcb9e840727cd..b8bd841048434 100644
--- a/arch/s390/net/bpf_jit_comp.c
+++ b/arch/s390/net/bpf_jit_comp.c
@@ -1063,8 +1063,8 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i
 		/* llgf %w1,map.max_entries(%b2) */
 		EMIT6_DISP_LH(0xe3000000, 0x0016, REG_W1, REG_0, BPF_REG_2,
 			      offsetof(struct bpf_array, map.max_entries));
-		/* clgrj %b3,%w1,0xa,label0: if %b3 >= %w1 goto out */
-		EMIT6_PCREL_LABEL(0xec000000, 0x0065, BPF_REG_3,
+		/* clrj %b3,%w1,0xa,label0: if (u32)%b3 >= (u32)%w1 goto out */
+		EMIT6_PCREL_LABEL(0xec000000, 0x0077, BPF_REG_3,
 				  REG_W1, 0, 0xa);
 
 		/*
@@ -1090,8 +1090,10 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i
 		 *         goto out;
 		 */
 
-		/* sllg %r1,%b3,3: %r1 = index * 8 */
-		EMIT6_DISP_LH(0xeb000000, 0x000d, REG_1, BPF_REG_3, REG_0, 3);
+		/* llgfr %r1,%b3: %r1 = (u32) index */
+		EMIT4(0xb9160000, REG_1, BPF_REG_3);
+		/* sllg %r1,%r1,3: %r1 *= 8 */
+		EMIT6_DISP_LH(0xeb000000, 0x000d, REG_1, REG_1, REG_0, 3);
 		/* lg %r1,prog(%b2,%r1) */
 		EMIT6_DISP_LH(0xe3000000, 0x0004, REG_1, BPF_REG_2,
 			      REG_1, offsetof(struct bpf_array, ptrs));
-- 
2.20.1

[PATCH 4.14 20/59] fpga: altera-ps-spi: Fix getting of optional confd gpio

[Greg Kroah-Hartman]

From: Phil Reid <preid@electromag.com.au>

[ Upstream commit dec43da46f63eb71f519d963ba6832838e4262a3 ]

Currently the driver does not handle EPROBE_DEFER for the confd gpio.
Use devm_gpiod_get_optional() instead of devm_gpiod_get() and return
error codes from altera_ps_probe().

Fixes: 5692fae0742d ("fpga manager: Add altera-ps-spi driver for Altera FPGAs")
Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/fpga/altera-ps-spi.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/fpga/altera-ps-spi.c b/drivers/fpga/altera-ps-spi.c
index 06d212a3d49dd..19b1cf8a82528 100644
--- a/drivers/fpga/altera-ps-spi.c
+++ b/drivers/fpga/altera-ps-spi.c
@@ -207,7 +207,7 @@ static int altera_ps_write_complete(struct fpga_manager *mgr,
 		return -EIO;
 	}
 
-	if (!IS_ERR(conf->confd)) {
+	if (conf->confd) {
 		if (!gpiod_get_raw_value_cansleep(conf->confd)) {
 			dev_err(&mgr->dev, "CONF_DONE is inactive!\n");
 			return -EIO;
@@ -263,10 +263,13 @@ static int altera_ps_probe(struct spi_device *spi)
 		return PTR_ERR(conf->status);
 	}
 
-	conf->confd = devm_gpiod_get(&spi->dev, "confd", GPIOD_IN);
+	conf->confd = devm_gpiod_get_optional(&spi->dev, "confd", GPIOD_IN);
 	if (IS_ERR(conf->confd)) {
-		dev_warn(&spi->dev, "Not using confd gpio: %ld\n",
-			 PTR_ERR(conf->confd));
+		dev_err(&spi->dev, "Failed to get confd gpio: %ld\n",
+			PTR_ERR(conf->confd));
+		return PTR_ERR(conf->confd);
+	} else if (!conf->confd) {
+		dev_warn(&spi->dev, "Not using confd gpio");
 	}
 
 	/* Register manager with unique name */
-- 
2.20.1

[PATCH 4.14 21/59] netfilter: xt_nfacct: Fix alignment mismatch in xt_nfacct_match_info

[Greg Kroah-Hartman]

From: Juliana Rodrigueiro <juliana.rodrigueiro@intra2net.com>

[ Upstream commit 89a26cd4b501e9511d3cd3d22327fc76a75a38b3 ]

When running a 64-bit kernel with a 32-bit iptables binary, the size of
the xt_nfacct_match_info struct diverges.

    kernel: sizeof(struct xt_nfacct_match_info) : 40
    iptables: sizeof(struct xt_nfacct_match_info)) : 36

Trying to append nfacct related rules results in an unhelpful message.
Although it is suggested to look for more information in dmesg, nothing
can be found there.

    # iptables -A <chain> -m nfacct --nfacct-name <acct-object>
    iptables: Invalid argument. Run `dmesg' for more information.

This patch fixes the memory misalignment by enforcing 8-byte alignment
within the struct's first revision. This solution is often used in many
other uapi netfilter headers.

Signed-off-by: Juliana Rodrigueiro <juliana.rodrigueiro@intra2net.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/uapi/linux/netfilter/xt_nfacct.h |  5 ++++
 net/netfilter/xt_nfacct.c                | 36 ++++++++++++++++--------
 2 files changed, 30 insertions(+), 11 deletions(-)

diff --git a/include/uapi/linux/netfilter/xt_nfacct.h b/include/uapi/linux/netfilter/xt_nfacct.h
index 5c8a4d760ee34..b5123ab8d54a8 100644
--- a/include/uapi/linux/netfilter/xt_nfacct.h
+++ b/include/uapi/linux/netfilter/xt_nfacct.h
@@ -11,4 +11,9 @@ struct xt_nfacct_match_info {
 	struct nf_acct	*nfacct;
 };
 
+struct xt_nfacct_match_info_v1 {
+	char		name[NFACCT_NAME_MAX];
+	struct nf_acct	*nfacct __attribute__((aligned(8)));
+};
+
 #endif /* _XT_NFACCT_MATCH_H */
diff --git a/net/netfilter/xt_nfacct.c b/net/netfilter/xt_nfacct.c
index 6f92d25590a85..ea447b437f122 100644
--- a/net/netfilter/xt_nfacct.c
+++ b/net/netfilter/xt_nfacct.c
@@ -55,25 +55,39 @@ nfacct_mt_destroy(const struct xt_mtdtor_param *par)
 	nfnl_acct_put(info->nfacct);
 }
 
-static struct xt_match nfacct_mt_reg __read_mostly = {
-	.name       = "nfacct",
-	.family     = NFPROTO_UNSPEC,
-	.checkentry = nfacct_mt_checkentry,
-	.match      = nfacct_mt,
-	.destroy    = nfacct_mt_destroy,
-	.matchsize  = sizeof(struct xt_nfacct_match_info),
-	.usersize   = offsetof(struct xt_nfacct_match_info, nfacct),
-	.me         = THIS_MODULE,
+static struct xt_match nfacct_mt_reg[] __read_mostly = {
+	{
+		.name       = "nfacct",
+		.revision   = 0,
+		.family     = NFPROTO_UNSPEC,
+		.checkentry = nfacct_mt_checkentry,
+		.match      = nfacct_mt,
+		.destroy    = nfacct_mt_destroy,
+		.matchsize  = sizeof(struct xt_nfacct_match_info),
+		.usersize   = offsetof(struct xt_nfacct_match_info, nfacct),
+		.me         = THIS_MODULE,
+	},
+	{
+		.name       = "nfacct",
+		.revision   = 1,
+		.family     = NFPROTO_UNSPEC,
+		.checkentry = nfacct_mt_checkentry,
+		.match      = nfacct_mt,
+		.destroy    = nfacct_mt_destroy,
+		.matchsize  = sizeof(struct xt_nfacct_match_info_v1),
+		.usersize   = offsetof(struct xt_nfacct_match_info_v1, nfacct),
+		.me         = THIS_MODULE,
+	},
 };
 
 static int __init nfacct_mt_init(void)
 {
-	return xt_register_match(&nfacct_mt_reg);
+	return xt_register_matches(nfacct_mt_reg, ARRAY_SIZE(nfacct_mt_reg));
 }
 
 static void __exit nfacct_mt_exit(void)
 {
-	xt_unregister_match(&nfacct_mt_reg);
+	xt_unregister_matches(nfacct_mt_reg, ARRAY_SIZE(nfacct_mt_reg));
 }
 
 module_init(nfacct_mt_init);
-- 
2.20.1

[PATCH 4.14 22/59] NFSv4: Fix return values for nfs4_file_open()

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

[ Upstream commit 90cf500e338ab3f3c0f126ba37e36fb6a9058441 ]

Currently, we are translating RPC level errors such as timeouts,
as well as interrupts etc into EOPENSTALE, which forces a single
replay of the open attempt. What we actually want to do is
force the replay only in the cases where the returned error
indicates that the file may have changed on the server.

So the fix is to spell out the exact set of errors where we want
to return EOPENSTALE.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/nfs4file.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/fs/nfs/nfs4file.c b/fs/nfs/nfs4file.c
index 2b3e0f1ca572f..b8d316a338bc9 100644
--- a/fs/nfs/nfs4file.c
+++ b/fs/nfs/nfs4file.c
@@ -74,13 +74,13 @@ nfs4_file_open(struct inode *inode, struct file *filp)
 	if (IS_ERR(inode)) {
 		err = PTR_ERR(inode);
 		switch (err) {
-		case -EPERM:
-		case -EACCES:
-		case -EDQUOT:
-		case -ENOSPC:
-		case -EROFS:
-			goto out_put_ctx;
 		default:
+			goto out_put_ctx;
+		case -ENOENT:
+		case -ESTALE:
+		case -EISDIR:
+		case -ENOTDIR:
+		case -ELOOP:
 			goto out_drop;
 		}
 	}
-- 
2.20.1

[PATCH 4.14 23/59] NFSv4: Fix return value in nfs_finish_open()

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

[ Upstream commit 9821421a291b548ef4369c6998745baa36ddecd5 ]

If the file turns out to be of the wrong type after opening, we want
to revalidate the path and retry, so return EOPENSTALE rather than
ESTALE.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/dir.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 85a6fdd76e20b..50c181fa00251 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1470,7 +1470,7 @@ static int nfs_finish_open(struct nfs_open_context *ctx,
 	if (S_ISREG(file->f_path.dentry->d_inode->i_mode))
 		nfs_file_set_open_context(file, ctx);
 	else
-		err = -ESTALE;
+		err = -EOPENSTALE;
 out:
 	return err;
 }
-- 
2.20.1

[PATCH 4.14 24/59] NFS: Fix initialisation of I/O result struct in nfs_pgio_rpcsetup

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

[ Upstream commit 17d8c5d145000070c581f2a8aa01edc7998582ab ]

Initialise the result count to 0 rather than initialising it to the
argument count. The reason is that we want to ensure we record the
I/O stats correctly in the case where an error is returned (for
instance in the layoutstats).

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/pagelist.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/nfs/pagelist.c b/fs/nfs/pagelist.c
index 132e568524dff..ceb6892d9bbdc 100644
--- a/fs/nfs/pagelist.c
+++ b/fs/nfs/pagelist.c
@@ -566,7 +566,7 @@ static void nfs_pgio_rpcsetup(struct nfs_pgio_header *hdr,
 	}
 
 	hdr->res.fattr   = &hdr->fattr;
-	hdr->res.count   = count;
+	hdr->res.count   = 0;
 	hdr->res.eof     = 0;
 	hdr->res.verf    = &hdr->verf;
 	nfs_fattr_init(&hdr->fattr);
-- 
2.20.1

[PATCH 4.14 25/59] Kconfig: Fix the reference to the IDT77105 Phy driver in the description of ATM_NICSTAR_USE_IDT77105

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit cd9d4ff9b78fcd0fc4708900ba3e52e71e1a7690 ]

This should be IDT77105, not IDT77015.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/atm/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/atm/Kconfig b/drivers/atm/Kconfig
index 2e2efa577437e..8c37294f1d1ee 100644
--- a/drivers/atm/Kconfig
+++ b/drivers/atm/Kconfig
@@ -200,7 +200,7 @@ config ATM_NICSTAR_USE_SUNI
 	  make the card work).
 
 config ATM_NICSTAR_USE_IDT77105
-	bool "Use IDT77015 PHY driver (25Mbps)"
+	bool "Use IDT77105 PHY driver (25Mbps)"
 	depends on ATM_NICSTAR
 	help
 	  Support for the PHYsical layer chip in ForeRunner LE25 cards. In
-- 
2.20.1

[PATCH 4.14 26/59] qed: Add cleanup in qed_slowpath_start()

[Greg Kroah-Hartman]

From: Wenwen Wang <wenwen@cs.uga.edu>

[ Upstream commit de0e4fd2f07ce3bbdb69dfb8d9426b7227451b69 ]

If qed_mcp_send_drv_version() fails, no cleanup is executed, leading to
memory leaks. To fix this issue, introduce the label 'err4' to perform the
cleanup work before returning the error.

Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Acked-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/qlogic/qed/qed_main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c
index ecc2d42965260..557332f1f886c 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_main.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_main.c
@@ -1081,7 +1081,7 @@ static int qed_slowpath_start(struct qed_dev *cdev,
 					      &drv_version);
 		if (rc) {
 			DP_NOTICE(cdev, "Failed sending drv version command\n");
-			return rc;
+			goto err4;
 		}
 	}
 
@@ -1089,6 +1089,8 @@ static int qed_slowpath_start(struct qed_dev *cdev,
 
 	return 0;
 
+err4:
+	qed_ll2_dealloc_if(cdev);
 err3:
 	qed_hw_stop(cdev);
 err2:
-- 
2.20.1

[PATCH 4.14 27/59] ARM: 8874/1: mm: only adjust sections of valid mm structures

[Greg Kroah-Hartman]

From: Doug Berger <opendmb@gmail.com>

[ Upstream commit c51bc12d06b3a5494fbfcbd788a8e307932a06e9 ]

A timing hazard exists when an early fork/exec thread begins
exiting and sets its mm pointer to NULL while a separate core
tries to update the section information.

This commit ensures that the mm pointer is not NULL before
setting its section parameters. The arguments provided by
commit 11ce4b33aedc ("ARM: 8672/1: mm: remove tasklist locking
from update_sections_early()") are equally valid for not
requiring grabbing the task_lock around this check.

Fixes: 08925c2f124f ("ARM: 8464/1: Update all mm structures with section adjustments")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mm/init.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index defb7fc264280..4fa12fcf1f5d8 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -722,7 +722,8 @@ static void update_sections_early(struct section_perm perms[], int n)
 		if (t->flags & PF_KTHREAD)
 			continue;
 		for_each_thread(t, s)
-			set_section_perms(perms, n, true, s->mm);
+			if (s->mm)
+				set_section_perms(perms, n, true, s->mm);
 	}
 	set_section_perms(perms, n, true, current->active_mm);
 	set_section_perms(perms, n, true, &init_mm);
-- 
2.20.1

[PATCH 4.14 28/59] batman-adv: Only read OGM2 tvlv_len after buffer len check

[Greg Kroah-Hartman]

From: Sven Eckelmann <sven@narfation.org>

[ Upstream commit 0ff0f15a32c093381ad1abc06abe85afb561ab28 ]

Multiple batadv_ogm2_packet can be stored in an skbuff. The functions
batadv_v_ogm_send_to_if() uses batadv_v_ogm_aggr_packet() to check if there
is another additional batadv_ogm2_packet in the skb or not before they
continue processing the packet.

The length for such an OGM2 is BATADV_OGM2_HLEN +
batadv_ogm2_packet->tvlv_len. The check must first check that at least
BATADV_OGM2_HLEN bytes are available before it accesses tvlv_len (which is
part of the header. Otherwise it might try read outside of the currently
available skbuff to get the content of tvlv_len.

Fixes: 9323158ef9f4 ("batman-adv: OGMv2 - implement originators logic")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/batman-adv/bat_v_ogm.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/net/batman-adv/bat_v_ogm.c b/net/batman-adv/bat_v_ogm.c
index 8be61734fc43c..e07f636160b67 100644
--- a/net/batman-adv/bat_v_ogm.c
+++ b/net/batman-adv/bat_v_ogm.c
@@ -642,17 +642,23 @@ batadv_v_ogm_process_per_outif(struct batadv_priv *bat_priv,
  * batadv_v_ogm_aggr_packet - checks if there is another OGM aggregated
  * @buff_pos: current position in the skb
  * @packet_len: total length of the skb
- * @tvlv_len: tvlv length of the previously considered OGM
+ * @ogm2_packet: potential OGM2 in buffer
  *
  * Return: true if there is enough space for another OGM, false otherwise.
  */
-static bool batadv_v_ogm_aggr_packet(int buff_pos, int packet_len,
-				     __be16 tvlv_len)
+static bool
+batadv_v_ogm_aggr_packet(int buff_pos, int packet_len,
+			 const struct batadv_ogm2_packet *ogm2_packet)
 {
 	int next_buff_pos = 0;
 
-	next_buff_pos += buff_pos + BATADV_OGM2_HLEN;
-	next_buff_pos += ntohs(tvlv_len);
+	/* check if there is enough space for the header */
+	next_buff_pos += buff_pos + sizeof(*ogm2_packet);
+	if (next_buff_pos > packet_len)
+		return false;
+
+	/* check if there is enough space for the optional TVLV */
+	next_buff_pos += ntohs(ogm2_packet->tvlv_len);
 
 	return (next_buff_pos <= packet_len) &&
 	       (next_buff_pos <= BATADV_MAX_AGGREGATION_BYTES);
@@ -829,7 +835,7 @@ int batadv_v_ogm_packet_recv(struct sk_buff *skb,
 	ogm_packet = (struct batadv_ogm2_packet *)skb->data;
 
 	while (batadv_v_ogm_aggr_packet(ogm_offset, skb_headlen(skb),
-					ogm_packet->tvlv_len)) {
+					ogm_packet)) {
 		batadv_v_ogm_process(skb, ogm_offset, if_incoming);
 
 		ogm_offset += BATADV_OGM2_HLEN;
-- 
2.20.1

[PATCH 4.14 29/59] r8152: Set memory to all 0xFFs on failed reg reads

[Greg Kroah-Hartman]

From: Prashant Malani <pmalani@chromium.org>

[ Upstream commit f53a7ad189594a112167efaf17ea8d0242b5ac00 ]

get_registers() blindly copies the memory written to by the
usb_control_msg() call even if the underlying urb failed.

This could lead to junk register values being read by the driver, since
some indirect callers of get_registers() ignore the return values. One
example is:
  ocp_read_dword() ignores the return value of generic_ocp_read(), which
  calls get_registers().

So, emulate PCI "Master Abort" behavior by setting the buffer to all
0xFFs when usb_control_msg() fails.

This patch is copied from the r8152 driver (v2.12.0) published by
Realtek (www.realtek.com).

Signed-off-by: Prashant Malani <pmalani@chromium.org>
Acked-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/r8152.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 66beff4d76467..455eec3c46942 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -787,8 +787,11 @@ int get_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data)
 	ret = usb_control_msg(tp->udev, usb_rcvctrlpipe(tp->udev, 0),
 			      RTL8152_REQ_GET_REGS, RTL8152_REQT_READ,
 			      value, index, tmp, size, 500);
+	if (ret < 0)
+		memset(data, 0xff, size);
+	else
+		memcpy(data, tmp, size);
 
-	memcpy(data, tmp, size);
 	kfree(tmp);
 
 	return ret;
-- 
2.20.1

[PATCH 4.14 30/59] x86/apic: Fix arch_dynirq_lower_bound() bug for DT enabled machines

[Greg Kroah-Hartman]

From: Thomas Gleixner <tglx@linutronix.de>

[ Upstream commit 3e5bedc2c258341702ddffbd7688c5e6eb01eafa ]

Rahul Tanwar reported the following bug on DT systems:

> 'ioapic_dynirq_base' contains the virtual IRQ base number. Presently, it is
> updated to the end of hardware IRQ numbers but this is done only when IOAPIC
> configuration type is IOAPIC_DOMAIN_LEGACY or IOAPIC_DOMAIN_STRICT. There is
> a third type IOAPIC_DOMAIN_DYNAMIC which applies when IOAPIC configuration
> comes from devicetree.
>
> See dtb_add_ioapic() in arch/x86/kernel/devicetree.c
>
> In case of IOAPIC_DOMAIN_DYNAMIC (DT/OF based system), 'ioapic_dynirq_base'
> remains to zero initialized value. This means that for OF based systems,
> virtual IRQ base will get set to zero.

Such systems will very likely not even boot.

For DT enabled machines ioapic_dynirq_base is irrelevant and not
updated, so simply map the IRQ base 1:1 instead.

Reported-by: Rahul Tanwar <rahul.tanwar@linux.intel.com>
Tested-by: Rahul Tanwar <rahul.tanwar@linux.intel.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: alan@linux.intel.com
Cc: bp@alien8.de
Cc: cheol.yong.kim@intel.com
Cc: qi-ming.wu@intel.com
Cc: rahul.tanwar@intel.com
Cc: rppt@linux.ibm.com
Cc: tony.luck@intel.com
Link: http://lkml.kernel.org/r/20190821081330.1187-1-rahul.tanwar@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/apic/io_apic.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 96a8a68f9c793..566b7bc5deaa0 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -2342,7 +2342,13 @@ unsigned int arch_dynirq_lower_bound(unsigned int from)
 	 * dmar_alloc_hwirq() may be called before setup_IO_APIC(), so use
 	 * gsi_top if ioapic_dynirq_base hasn't been initialized yet.
 	 */
-	return ioapic_initialized ? ioapic_dynirq_base : gsi_top;
+	if (!ioapic_initialized)
+		return gsi_top;
+	/*
+	 * For DT enabled machines ioapic_dynirq_base is irrelevant and not
+	 * updated. So simply return @from if ioapic_dynirq_base == 0.
+	 */
+	return ioapic_dynirq_base ? : from;
 }
 
 #ifdef CONFIG_X86_32
-- 
2.20.1

[PATCH 4.14 31/59] netfilter: nf_conntrack_ftp: Fix debug output

[Greg Kroah-Hartman]

From: Thomas Jarosch <thomas.jarosch@intra2net.com>

[ Upstream commit 3a069024d371125227de3ac8fa74223fcf473520 ]

The find_pattern() debug output was printing the 'skip' character.
This can be a NULL-byte and messes up further pr_debug() output.

Output without the fix:
kernel: nf_conntrack_ftp: Pattern matches!
kernel: nf_conntrack_ftp: Skipped up to `<7>nf_conntrack_ftp: find_pattern `PORT': dlen = 8
kernel: nf_conntrack_ftp: find_pattern `EPRT': dlen = 8

Output with the fix:
kernel: nf_conntrack_ftp: Pattern matches!
kernel: nf_conntrack_ftp: Skipped up to 0x0 delimiter!
kernel: nf_conntrack_ftp: Match succeeded!
kernel: nf_conntrack_ftp: conntrack_ftp: match `172,17,0,100,200,207' (20 bytes at 4150681645)
kernel: nf_conntrack_ftp: find_pattern `PORT': dlen = 8

Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_conntrack_ftp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/netfilter/nf_conntrack_ftp.c b/net/netfilter/nf_conntrack_ftp.c
index f0e9a7511e1ac..c236c7d1655d0 100644
--- a/net/netfilter/nf_conntrack_ftp.c
+++ b/net/netfilter/nf_conntrack_ftp.c
@@ -323,7 +323,7 @@ static int find_pattern(const char *data, size_t dlen,
 		i++;
 	}
 
-	pr_debug("Skipped up to `%c'!\n", skip);
+	pr_debug("Skipped up to 0x%hhx delimiter!\n", skip);
 
 	*numoff = i;
 	*numlen = getnum(data + i, dlen - i, cmd, term, numoff);
-- 
2.20.1

[PATCH 4.14 32/59] NFSv2: Fix eof handling

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

[ Upstream commit 71affe9be45a5c60b9772e1b2701710712637274 ]

If we received a reply from the server with a zero length read and
no error, then that implies we are at eof.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/proc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/nfs/proc.c b/fs/nfs/proc.c
index f7fd9192d4bc8..73d1f7277e482 100644
--- a/fs/nfs/proc.c
+++ b/fs/nfs/proc.c
@@ -589,7 +589,8 @@ static int nfs_read_done(struct rpc_task *task, struct nfs_pgio_header *hdr)
 		/* Emulate the eof flag, which isn't normally needed in NFSv2
 		 * as it is guaranteed to always return the file attributes
 		 */
-		if (hdr->args.offset + hdr->res.count >= hdr->res.fattr->size)
+		if ((hdr->res.count == 0 && hdr->args.count > 0) ||
+		    hdr->args.offset + hdr->res.count >= hdr->res.fattr->size)
 			hdr->res.eof = 1;
 	}
 	return 0;
-- 
2.20.1

[PATCH 4.14 33/59] NFSv2: Fix write regression

[Greg Kroah-Hartman]

From: Trond Myklebust <trond.myklebust@hammerspace.com>

[ Upstream commit d33d4beb522987d1c305c12500796f9be3687dee ]

Ensure we update the write result count on success, since the
RPC call itself does not do so.

Reported-by: Jan Stancek <jstancek@redhat.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/nfs/proc.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/fs/nfs/proc.c b/fs/nfs/proc.c
index 73d1f7277e482..eff93315572e7 100644
--- a/fs/nfs/proc.c
+++ b/fs/nfs/proc.c
@@ -611,8 +611,10 @@ static int nfs_proc_pgio_rpc_prepare(struct rpc_task *task,
 
 static int nfs_write_done(struct rpc_task *task, struct nfs_pgio_header *hdr)
 {
-	if (task->tk_status >= 0)
+	if (task->tk_status >= 0) {
+		hdr->res.count = hdr->args.count;
 		nfs_writeback_update_inode(hdr);
+	}
 	return 0;
 }
 
-- 
2.20.1

[PATCH 4.14 34/59] kallsyms: Dont let kallsyms_lookup_size_offset() fail on retrieving the first symbol

[Greg Kroah-Hartman]

From: Marc Zyngier <maz@kernel.org>

[ Upstream commit 2a1a3fa0f29270583f0e6e3100d609e09697add1 ]

An arm64 kernel configured with

  CONFIG_KPROBES=y
  CONFIG_KALLSYMS=y
  # CONFIG_KALLSYMS_ALL is not set
  CONFIG_KALLSYMS_BASE_RELATIVE=y

reports the following kprobe failure:

  [    0.032677] kprobes: failed to populate blacklist: -22
  [    0.033376] Please take care of using kprobes.

It appears that kprobe fails to retrieve the symbol at address
0xffff000010081000, despite this symbol being in System.map:

  ffff000010081000 T __exception_text_start

This symbol is part of the first group of aliases in the
kallsyms_offsets array (symbol names generated using ugly hacks in
scripts/kallsyms.c):

  kallsyms_offsets:
          .long   0x1000 // do_undefinstr
          .long   0x1000 // efi_header_end
          .long   0x1000 // _stext
          .long   0x1000 // __exception_text_start
          .long   0x12b0 // do_cp15instr

Looking at the implementation of get_symbol_pos(), it returns the
lowest index for aliasing symbols. In this case, it return 0.

But kallsyms_lookup_size_offset() considers 0 as a failure, which
is obviously wrong (there is definitely a valid symbol living there).
In turn, the kprobe blacklisting stops abruptly, hence the original
error.

A CONFIG_KALLSYMS_ALL kernel wouldn't fail as there is always
some random symbols at the beginning of this array, which are never
looked up via kallsyms_lookup_size_offset.

Fix it by considering that get_symbol_pos() is always successful
(which is consistent with the other uses of this function).

Fixes: ffc5089196446 ("[PATCH] Create kallsyms_lookup_size_offset()")
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/kallsyms.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/kernel/kallsyms.c b/kernel/kallsyms.c
index 127e7cfafa552..3e1b66366ac23 100644
--- a/kernel/kallsyms.c
+++ b/kernel/kallsyms.c
@@ -296,8 +296,10 @@ int kallsyms_lookup_size_offset(unsigned long addr, unsigned long *symbolsize,
 {
 	char namebuf[KSYM_NAME_LEN];
 
-	if (is_ksym_addr(addr))
-		return !!get_symbol_pos(addr, symbolsize, offset);
+	if (is_ksym_addr(addr)) {
+		get_symbol_pos(addr, symbolsize, offset);
+		return 1;
+	}
 	return !!module_address_lookup(addr, symbolsize, offset, NULL, namebuf) ||
 	       !!__bpf_address_lookup(addr, symbolsize, offset, namebuf);
 }
-- 
2.20.1

[PATCH 4.14 35/59] cifs: set domainName when a domain-key is used in multiuser

[Greg Kroah-Hartman]

From: Ronnie Sahlberg <lsahlber@redhat.com>

[ Upstream commit f2aee329a68f5a907bcff11a109dfe17c0b41aeb ]

RHBZ: 1710429

When we use a domain-key to authenticate using multiuser we must also set
the domainnmame for the new volume as it will be used and passed to the server
in the NTLMSSP Domain-name.

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/connect.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 57c62ff4e8d6d..699e763ea671a 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -2542,6 +2542,7 @@ static int
 cifs_set_cifscreds(struct smb_vol *vol, struct cifs_ses *ses)
 {
 	int rc = 0;
+	int is_domain = 0;
 	const char *delim, *payload;
 	char *desc;
 	ssize_t len;
@@ -2589,6 +2590,7 @@ cifs_set_cifscreds(struct smb_vol *vol, struct cifs_ses *ses)
 			rc = PTR_ERR(key);
 			goto out_err;
 		}
+		is_domain = 1;
 	}
 
 	down_read(&key->sem);
@@ -2646,6 +2648,26 @@ cifs_set_cifscreds(struct smb_vol *vol, struct cifs_ses *ses)
 		goto out_key_put;
 	}
 
+	/*
+	 * If we have a domain key then we must set the domainName in the
+	 * for the request.
+	 */
+	if (is_domain && ses->domainName) {
+		vol->domainname = kstrndup(ses->domainName,
+					   strlen(ses->domainName),
+					   GFP_KERNEL);
+		if (!vol->domainname) {
+			cifs_dbg(FYI, "Unable to allocate %zd bytes for "
+				 "domain\n", len);
+			rc = -ENOMEM;
+			kfree(vol->username);
+			vol->username = NULL;
+			kfree(vol->password);
+			vol->password = NULL;
+			goto out_key_put;
+		}
+	}
+
 out_key_put:
 	up_read(&key->sem);
 	key_put(key);
-- 
2.20.1

[PATCH 4.14 36/59] cifs: Use kzfree() to zero out the password

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 478228e57f81f6cb60798d54fc02a74ea7dd267e ]

It's safer to zero out the password so that it can never be disclosed.

Fixes: 0c219f5799c7 ("cifs: set domainName when a domain-key is used in multiuser")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/cifs/connect.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 699e763ea671a..f523a9ca9574f 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -2662,7 +2662,7 @@ cifs_set_cifscreds(struct smb_vol *vol, struct cifs_ses *ses)
 			rc = -ENOMEM;
 			kfree(vol->username);
 			vol->username = NULL;
-			kfree(vol->password);
+			kzfree(vol->password);
 			vol->password = NULL;
 			goto out_key_put;
 		}
-- 
2.20.1

[PATCH 4.14 37/59] ARM: 8901/1: add a criteria for pfn_valid of arm

[Greg Kroah-Hartman]

From: zhaoyang <huangzhaoyang@gmail.com>

[ Upstream commit 5b3efa4f1479c91cb8361acef55f9c6662feba57 ]

pfn_valid can be wrong when parsing a invalid pfn whose phys address
exceeds BITS_PER_LONG as the MSB will be trimed when shifted.

The issue originally arise from bellowing call stack, which corresponding to
an access of the /proc/kpageflags from userspace with a invalid pfn parameter
and leads to kernel panic.

[46886.723249] c7 [<c031ff98>] (stable_page_flags) from [<c03203f8>]
[46886.723264] c7 [<c0320368>] (kpageflags_read) from [<c0312030>]
[46886.723280] c7 [<c0311fb0>] (proc_reg_read) from [<c02a6e6c>]
[46886.723290] c7 [<c02a6e24>] (__vfs_read) from [<c02a7018>]
[46886.723301] c7 [<c02a6f74>] (vfs_read) from [<c02a778c>]
[46886.723315] c7 [<c02a770c>] (SyS_pread64) from [<c0108620>]
(ret_fast_syscall+0x0/0x28)

Signed-off-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mm/init.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 4fa12fcf1f5d8..27a40101dd3a7 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -195,6 +195,11 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max_low,
 #ifdef CONFIG_HAVE_ARCH_PFN_VALID
 int pfn_valid(unsigned long pfn)
 {
+	phys_addr_t addr = __pfn_to_phys(pfn);
+
+	if (__phys_to_pfn(addr) != pfn)
+		return 0;
+
 	return memblock_is_map_memory(__pfn_to_phys(pfn));
 }
 EXPORT_SYMBOL(pfn_valid);
-- 
2.20.1

[PATCH 4.14 38/59] sky2: Disable MSI on yet another ASUS boards (P6Xxxx)

[Greg Kroah-Hartman]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 189308d5823a089b56e2299cd96589507dac7319 ]

A similar workaround for the suspend/resume problem is needed for yet
another ASUS machines, P6X models.  Like the previous fix, the BIOS
doesn't provide the standard DMI_SYS_* entry, so again DMI_BOARD_*
entries are used instead.

Reported-and-tested-by: SteveM <swm@swm1.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/sky2.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c
index 7b239af6cc040..5046efdad5390 100644
--- a/drivers/net/ethernet/marvell/sky2.c
+++ b/drivers/net/ethernet/marvell/sky2.c
@@ -4954,6 +4954,13 @@ static const struct dmi_system_id msi_blacklist[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "P6T"),
 		},
 	},
+	{
+		.ident = "ASUS P6X",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			DMI_MATCH(DMI_BOARD_NAME, "P6X"),
+		},
+	},
 	{}
 };
 
-- 
2.20.1

[PATCH 4.14 39/59] i2c: designware: Synchronize IRQs when unregistering slave client

[Greg Kroah-Hartman]

From: Jarkko Nikula <jarkko.nikula@linux.intel.com>

[ Upstream commit c486dcd2f1bbdd524a1e0149734b79e4ae329650 ]

Make sure interrupt handler i2c_dw_irq_handler_slave() has finished
before clearing the the dev->slave pointer in i2c_dw_unreg_slave().

There is possibility for a race if i2c_dw_irq_handler_slave() is running
on another CPU while clearing the dev->slave pointer.

Reported-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Reported-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-designware-slave.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/i2c/busses/i2c-designware-slave.c b/drivers/i2c/busses/i2c-designware-slave.c
index ea9578ab19a15..fccf936f4b9b5 100644
--- a/drivers/i2c/busses/i2c-designware-slave.c
+++ b/drivers/i2c/busses/i2c-designware-slave.c
@@ -206,6 +206,7 @@ static int i2c_dw_unreg_slave(struct i2c_client *slave)
 
 	dev->disable_int(dev);
 	dev->disable(dev);
+	synchronize_irq(dev->irq);
 	dev->slave = NULL;
 	pm_runtime_put(dev->dev);
 
-- 
2.20.1

[PATCH 4.14 40/59] perf/x86/intel: Restrict period on Nehalem

[Greg Kroah-Hartman]

From: Josh Hunt <johunt@akamai.com>

[ Upstream commit 44d3bbb6f5e501b873218142fe08cdf62a4ac1f3 ]

We see our Nehalem machines reporting 'perfevents: irq loop stuck!' in
some cases when using perf:

perfevents: irq loop stuck!
WARNING: CPU: 0 PID: 3485 at arch/x86/events/intel/core.c:2282 intel_pmu_handle_irq+0x37b/0x530
...
RIP: 0010:intel_pmu_handle_irq+0x37b/0x530
...
Call Trace:
<NMI>
? perf_event_nmi_handler+0x2e/0x50
? intel_pmu_save_and_restart+0x50/0x50
perf_event_nmi_handler+0x2e/0x50
nmi_handle+0x6e/0x120
default_do_nmi+0x3e/0x100
do_nmi+0x102/0x160
end_repeat_nmi+0x16/0x50
...
? native_write_msr+0x6/0x20
? native_write_msr+0x6/0x20
</NMI>
intel_pmu_enable_event+0x1ce/0x1f0
x86_pmu_start+0x78/0xa0
x86_pmu_enable+0x252/0x310
__perf_event_task_sched_in+0x181/0x190
? __switch_to_asm+0x41/0x70
? __switch_to_asm+0x35/0x70
? __switch_to_asm+0x41/0x70
? __switch_to_asm+0x35/0x70
finish_task_switch+0x158/0x260
__schedule+0x2f6/0x840
? hrtimer_start_range_ns+0x153/0x210
schedule+0x32/0x80
schedule_hrtimeout_range_clock+0x8a/0x100
? hrtimer_init+0x120/0x120
ep_poll+0x2f7/0x3a0
? wake_up_q+0x60/0x60
do_epoll_wait+0xa9/0xc0
__x64_sys_epoll_wait+0x1a/0x20
do_syscall_64+0x4e/0x110
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fdeb1e96c03
...
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: acme@kernel.org
Cc: Josh Hunt <johunt@akamai.com>
Cc: bpuranda@akamai.com
Cc: mingo@redhat.com
Cc: jolsa@redhat.com
Cc: tglx@linutronix.de
Cc: namhyung@kernel.org
Cc: alexander.shishkin@linux.intel.com
Link: https://lkml.kernel.org/r/1566256411-18820-1-git-send-email-johunt@akamai.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/intel/core.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c
index d44bb077c6cfd..4a60ed8c44133 100644
--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -3297,6 +3297,11 @@ static u64 bdw_limit_period(struct perf_event *event, u64 left)
 	return left;
 }
 
+static u64 nhm_limit_period(struct perf_event *event, u64 left)
+{
+	return max(left, 32ULL);
+}
+
 PMU_FORMAT_ATTR(event,	"config:0-7"	);
 PMU_FORMAT_ATTR(umask,	"config:8-15"	);
 PMU_FORMAT_ATTR(edge,	"config:18"	);
@@ -4092,6 +4097,7 @@ __init int intel_pmu_init(void)
 		x86_pmu.pebs_constraints = intel_nehalem_pebs_event_constraints;
 		x86_pmu.enable_all = intel_pmu_nhm_enable_all;
 		x86_pmu.extra_regs = intel_nehalem_extra_regs;
+		x86_pmu.limit_period = nhm_limit_period;
 
 		x86_pmu.cpu_events = nhm_events_attrs;
 
-- 
2.20.1

[PATCH 4.14 41/59] perf/x86/amd/ibs: Fix sample bias for dispatched micro-ops

[Greg Kroah-Hartman]

From: Kim Phillips <kim.phillips@amd.com>

[ Upstream commit 0f4cd769c410e2285a4e9873a684d90423f03090 ]

When counting dispatched micro-ops with cnt_ctl=1, in order to prevent
sample bias, IBS hardware preloads the least significant 7 bits of
current count (IbsOpCurCnt) with random values, such that, after the
interrupt is handled and counting resumes, the next sample taken
will be slightly perturbed.

The current count bitfield is in the IBS execution control h/w register,
alongside the maximum count field.

Currently, the IBS driver writes that register with the maximum count,
leaving zeroes to fill the current count field, thereby overwriting
the random bits the hardware preloaded for itself.

Fix the driver to actually retain and carry those random bits from the
read of the IBS control register, through to its write, instead of
overwriting the lower current count bits with zeroes.

Tested with:

perf record -c 100001 -e ibs_op/cnt_ctl=1/pp -a -C 0 taskset -c 0 <workload>

'perf annotate' output before:

 15.70  65:   addsd     %xmm0,%xmm1
 17.30        add       $0x1,%rax
 15.88        cmp       %rdx,%rax
              je        82
 17.32  72:   test      $0x1,%al
              jne       7c
  7.52        movapd    %xmm1,%xmm0
  5.90        jmp       65
  8.23  7c:   sqrtsd    %xmm1,%xmm0
 12.15        jmp       65

'perf annotate' output after:

 16.63  65:   addsd     %xmm0,%xmm1
 16.82        add       $0x1,%rax
 16.81        cmp       %rdx,%rax
              je        82
 16.69  72:   test      $0x1,%al
              jne       7c
  8.30        movapd    %xmm1,%xmm0
  8.13        jmp       65
  8.24  7c:   sqrtsd    %xmm1,%xmm0
  8.39        jmp       65

Tested on Family 15h and 17h machines.

Machines prior to family 10h Rev. C don't have the RDWROPCNT capability,
and have the IbsOpCurCnt bitfield reserved, so this patch shouldn't
affect their operation.

It is unknown why commit db98c5faf8cb ("perf/x86: Implement 64-bit
counter support for IBS") ignored the lower 4 bits of the IbsOpCurCnt
field; the number of preloaded random bits has always been 7, AFAICT.

Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Arnaldo Carvalho de Melo" <acme@kernel.org>
Cc: <x86@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "Borislav Petkov" <bp@alien8.de>
Cc: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: "Namhyung Kim" <namhyung@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20190826195730.30614-1-kim.phillips@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/events/amd/ibs.c         | 13 ++++++++++---
 arch/x86/include/asm/perf_event.h | 12 ++++++++----
 2 files changed, 18 insertions(+), 7 deletions(-)

diff --git a/arch/x86/events/amd/ibs.c b/arch/x86/events/amd/ibs.c
index 8c51844694e2f..7a86fbc07ddc1 100644
--- a/arch/x86/events/amd/ibs.c
+++ b/arch/x86/events/amd/ibs.c
@@ -672,10 +672,17 @@ fail:
 
 	throttle = perf_event_overflow(event, &data, &regs);
 out:
-	if (throttle)
+	if (throttle) {
 		perf_ibs_stop(event, 0);
-	else
-		perf_ibs_enable_event(perf_ibs, hwc, period >> 4);
+	} else {
+		period >>= 4;
+
+		if ((ibs_caps & IBS_CAPS_RDWROPCNT) &&
+		    (*config & IBS_OP_CNT_CTL))
+			period |= *config & IBS_OP_CUR_CNT_RAND;
+
+		perf_ibs_enable_event(perf_ibs, hwc, period);
+	}
 
 	perf_event_update_userpage(event);
 
diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h
index 78241b736f2a0..f6c4915a863e0 100644
--- a/arch/x86/include/asm/perf_event.h
+++ b/arch/x86/include/asm/perf_event.h
@@ -209,16 +209,20 @@ struct x86_pmu_capability {
 #define IBSCTL_LVT_OFFSET_VALID		(1ULL<<8)
 #define IBSCTL_LVT_OFFSET_MASK		0x0F
 
-/* ibs fetch bits/masks */
+/* IBS fetch bits/masks */
 #define IBS_FETCH_RAND_EN	(1ULL<<57)
 #define IBS_FETCH_VAL		(1ULL<<49)
 #define IBS_FETCH_ENABLE	(1ULL<<48)
 #define IBS_FETCH_CNT		0xFFFF0000ULL
 #define IBS_FETCH_MAX_CNT	0x0000FFFFULL
 
-/* ibs op bits/masks */
-/* lower 4 bits of the current count are ignored: */
-#define IBS_OP_CUR_CNT		(0xFFFF0ULL<<32)
+/*
+ * IBS op bits/masks
+ * The lower 7 bits of the current count are random bits
+ * preloaded by hardware and ignored in software
+ */
+#define IBS_OP_CUR_CNT		(0xFFF80ULL<<32)
+#define IBS_OP_CUR_CNT_RAND	(0x0007FULL<<32)
 #define IBS_OP_CNT_CTL		(1ULL<<19)
 #define IBS_OP_VAL		(1ULL<<18)
 #define IBS_OP_ENABLE		(1ULL<<17)
-- 
2.20.1

[PATCH 4.14 42/59] amd-xgbe: Fix error path in xgbe_mod_init()

[Greg Kroah-Hartman]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit b6b4dc4c1fa7f1c99398e7dc85758049645e9588 ]

In xgbe_mod_init(), we should do cleanup if some error occurs

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: efbaa828330a ("amd-xgbe: Add support to handle device renaming")
Fixes: 47f164deab22 ("amd-xgbe: Add PCI device support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/amd/xgbe/xgbe-main.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-main.c b/drivers/net/ethernet/amd/xgbe/xgbe-main.c
index e31d9d1fb6a66..e4e632e025d31 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-main.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-main.c
@@ -487,13 +487,19 @@ static int __init xgbe_mod_init(void)
 
 	ret = xgbe_platform_init();
 	if (ret)
-		return ret;
+		goto err_platform_init;
 
 	ret = xgbe_pci_init();
 	if (ret)
-		return ret;
+		goto err_pci_init;
 
 	return 0;
+
+err_pci_init:
+	xgbe_platform_exit();
+err_platform_init:
+	unregister_netdevice_notifier(&xgbe_netdev_notifier);
+	return ret;
 }
 
 static void __exit xgbe_mod_exit(void)
-- 
2.20.1

[PATCH 4.14 43/59] tools/power x86_energy_perf_policy: Fix "uninitialized variable" warnings at -O2

[Greg Kroah-Hartman]

From: Ben Hutchings <ben@decadent.org.uk>

[ Upstream commit adb8049097a9ec4acd09fbd3aa8636199a78df8a ]

x86_energy_perf_policy first uses __get_cpuid() to check the maximum
CPUID level and exits if it is too low.  It then assumes that later
calls will succeed (which I think is architecturally guaranteed).  It
also assumes that CPUID works at all (which is not guaranteed on
x86_32).

If optimisations are enabled, gcc warns about potentially
uninitialized variables.  Fix this by adding an exit-on-error after
every call to __get_cpuid() instead of just checking the maximum
level.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../x86_energy_perf_policy.c                  | 26 +++++++++++--------
 1 file changed, 15 insertions(+), 11 deletions(-)

diff --git a/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c b/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c
index 65bbe627a425f..bbef8bcf44d6d 100644
--- a/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c
+++ b/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c
@@ -1260,6 +1260,15 @@ void probe_dev_msr(void)
 		if (system("/sbin/modprobe msr > /dev/null 2>&1"))
 			err(-5, "no /dev/cpu/0/msr, Try \"# modprobe msr\" ");
 }
+
+static void get_cpuid_or_exit(unsigned int leaf,
+			     unsigned int *eax, unsigned int *ebx,
+			     unsigned int *ecx, unsigned int *edx)
+{
+	if (!__get_cpuid(leaf, eax, ebx, ecx, edx))
+		errx(1, "Processor not supported\n");
+}
+
 /*
  * early_cpuid()
  * initialize turbo_is_enabled, has_hwp, has_epb
@@ -1267,15 +1276,10 @@ void probe_dev_msr(void)
  */
 void early_cpuid(void)
 {
-	unsigned int eax, ebx, ecx, edx, max_level;
+	unsigned int eax, ebx, ecx, edx;
 	unsigned int fms, family, model;
 
-	__get_cpuid(0, &max_level, &ebx, &ecx, &edx);
-
-	if (max_level < 6)
-		errx(1, "Processor not supported\n");
-
-	__get_cpuid(1, &fms, &ebx, &ecx, &edx);
+	get_cpuid_or_exit(1, &fms, &ebx, &ecx, &edx);
 	family = (fms >> 8) & 0xf;
 	model = (fms >> 4) & 0xf;
 	if (family == 6 || family == 0xf)
@@ -1289,7 +1293,7 @@ void early_cpuid(void)
 		bdx_highest_ratio = msr & 0xFF;
 	}
 
-	__get_cpuid(0x6, &eax, &ebx, &ecx, &edx);
+	get_cpuid_or_exit(0x6, &eax, &ebx, &ecx, &edx);
 	turbo_is_enabled = (eax >> 1) & 1;
 	has_hwp = (eax >> 7) & 1;
 	has_epb = (ecx >> 3) & 1;
@@ -1307,7 +1311,7 @@ void parse_cpuid(void)
 
 	eax = ebx = ecx = edx = 0;
 
-	__get_cpuid(0, &max_level, &ebx, &ecx, &edx);
+	get_cpuid_or_exit(0, &max_level, &ebx, &ecx, &edx);
 
 	if (ebx == 0x756e6547 && edx == 0x49656e69 && ecx == 0x6c65746e)
 		genuine_intel = 1;
@@ -1316,7 +1320,7 @@ void parse_cpuid(void)
 		fprintf(stderr, "CPUID(0): %.4s%.4s%.4s ",
 			(char *)&ebx, (char *)&edx, (char *)&ecx);
 
-	__get_cpuid(1, &fms, &ebx, &ecx, &edx);
+	get_cpuid_or_exit(1, &fms, &ebx, &ecx, &edx);
 	family = (fms >> 8) & 0xf;
 	model = (fms >> 4) & 0xf;
 	stepping = fms & 0xf;
@@ -1341,7 +1345,7 @@ void parse_cpuid(void)
 		errx(1, "CPUID: no MSR");
 
 
-	__get_cpuid(0x6, &eax, &ebx, &ecx, &edx);
+	get_cpuid_or_exit(0x6, &eax, &ebx, &ecx, &edx);
 	/* turbo_is_enabled already set */
 	/* has_hwp already set */
 	has_hwp_notify = eax & (1 << 8);
-- 
2.20.1

[PATCH 4.14 44/59] tools/power x86_energy_perf_policy: Fix argument parsing

[Greg Kroah-Hartman]

From: Zephaniah E. Loss-Cutler-Hull <zephaniah@gmail.com>

[ Upstream commit 03531482402a2bc4ab93cf6dde46833775e035e9 ]

The -w argument in x86_energy_perf_policy currently triggers an
unconditional segfault.

This is because the argument string reads: "+a:c:dD:E:e:f:m:M:rt:u:vw" and
yet the argument handler expects an argument.

When parse_optarg_string is called with a null argument, we then proceed to
crash in strncmp, not horribly friendly.

The man page describes -w as taking an argument, the long form
(--hwp-window) is correctly marked as taking a required argument, and the
code expects it.

As such, this patch simply marks the short form (-w) as requiring an
argument.

Signed-off-by: Zephaniah E. Loss-Cutler-Hull <zephaniah@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c b/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c
index bbef8bcf44d6d..2aba622d1c5aa 100644
--- a/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c
+++ b/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c
@@ -546,7 +546,7 @@ void cmdline(int argc, char **argv)
 
 	progname = argv[0];
 
-	while ((opt = getopt_long_only(argc, argv, "+a:c:dD:E:e:f:m:M:rt:u:vw",
+	while ((opt = getopt_long_only(argc, argv, "+a:c:dD:E:e:f:m:M:rt:u:vw:",
 				long_options, &option_index)) != -1) {
 		switch (opt) {
 		case 'a':
-- 
2.20.1

[PATCH 4.14 45/59] tools/power turbostat: fix buffer overrun

[Greg Kroah-Hartman]

From: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>

[ Upstream commit eeb71c950bc6eee460f2070643ce137e067b234c ]

turbostat could be terminated by general protection fault on some latest
hardwares which (for example) support 9 levels of C-states and show 18
"tADDED" lines. That bloats the total output and finally causes buffer
overrun.  So let's extend the buffer to avoid this.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/power/x86/turbostat/turbostat.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
index 3e5f8b3db2720..19e345cf8193e 100644
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -4488,7 +4488,7 @@ int initialize_counters(int cpu_id)
 
 void allocate_output_buffer()
 {
-	output_buffer = calloc(1, (1 + topo.num_cpus) * 1024);
+	output_buffer = calloc(1, (1 + topo.num_cpus) * 2048);
 	outp = output_buffer;
 	if (outp == NULL)
 		err(-1, "calloc output buffer");
-- 
2.20.1

[PATCH 4.14 46/59] net: seeq: Fix the function used to release some memory in an error handling path

[Greg Kroah-Hartman]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit e1e54ec7fb55501c33b117c111cb0a045b8eded2 ]

In commit 99cd149efe82 ("sgiseeq: replace use of dma_cache_wback_inv"),
a call to 'get_zeroed_page()' has been turned into a call to
'dma_alloc_coherent()'. Only the remove function has been updated to turn
the corresponding 'free_page()' into 'dma_free_attrs()'.
The error hndling path of the probe function has not been updated.

Fix it now.

Rename the corresponding label to something more in line.

Fixes: 99cd149efe82 ("sgiseeq: replace use of dma_cache_wback_inv")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/seeq/sgiseeq.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/seeq/sgiseeq.c b/drivers/net/ethernet/seeq/sgiseeq.c
index 84a42ed97601d..49a18439bea2b 100644
--- a/drivers/net/ethernet/seeq/sgiseeq.c
+++ b/drivers/net/ethernet/seeq/sgiseeq.c
@@ -792,15 +792,16 @@ static int sgiseeq_probe(struct platform_device *pdev)
 		printk(KERN_ERR "Sgiseeq: Cannot register net device, "
 		       "aborting.\n");
 		err = -ENODEV;
-		goto err_out_free_page;
+		goto err_out_free_attrs;
 	}
 
 	printk(KERN_INFO "%s: %s %pM\n", dev->name, sgiseeqstr, dev->dev_addr);
 
 	return 0;
 
-err_out_free_page:
-	free_page((unsigned long) sp->srings);
+err_out_free_attrs:
+	dma_free_attrs(&pdev->dev, sizeof(*sp->srings), sp->srings,
+		       sp->srings_dma, DMA_ATTR_NON_CONSISTENT);
 err_out_free_dev:
 	free_netdev(dev);
 
-- 
2.20.1

[PATCH 4.14 47/59] dmaengine: ti: dma-crossbar: Fix a memory leak bug

[Greg Kroah-Hartman]

From: Wenwen Wang <wenwen@cs.uga.edu>

[ Upstream commit 2c231c0c1dec42192aca0f87f2dc68b8f0cbc7d2 ]

In ti_dra7_xbar_probe(), 'rsv_events' is allocated through kcalloc(). Then
of_property_read_u32_array() is invoked to search for the property.
However, if this process fails, 'rsv_events' is not deallocated, leading to
a memory leak bug. To fix this issue, free 'rsv_events' before returning
the error.

Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/1565938136-7249-1-git-send-email-wenwen@cs.uga.edu
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/ti-dma-crossbar.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/ti-dma-crossbar.c b/drivers/dma/ti-dma-crossbar.c
index 9272b173c7465..6574cb5a12fee 100644
--- a/drivers/dma/ti-dma-crossbar.c
+++ b/drivers/dma/ti-dma-crossbar.c
@@ -395,8 +395,10 @@ static int ti_dra7_xbar_probe(struct platform_device *pdev)
 
 		ret = of_property_read_u32_array(node, pname, (u32 *)rsv_events,
 						 nelm * 2);
-		if (ret)
+		if (ret) {
+			kfree(rsv_events);
 			return ret;
+		}
 
 		for (i = 0; i < nelm; i++) {
 			ti_dra7_xbar_reserve(rsv_events[i][0], rsv_events[i][1],
-- 
2.20.1

[PATCH 4.14 48/59] dmaengine: ti: omap-dma: Add cleanup in omap_dma_probe()

[Greg Kroah-Hartman]

From: Wenwen Wang <wenwen@cs.uga.edu>

[ Upstream commit 962411b05a6d3342aa649e39cda1704c1fc042c6 ]

If devm_request_irq() fails to disable all interrupts, no cleanup is
performed before retuning the error. To fix this issue, invoke
omap_dma_free() to do the cleanup.

Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/1565938570-7528-1-git-send-email-wenwen@cs.uga.edu
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/omap-dma.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c
index 8c1665c8fe33a..14b560facf779 100644
--- a/drivers/dma/omap-dma.c
+++ b/drivers/dma/omap-dma.c
@@ -1534,8 +1534,10 @@ static int omap_dma_probe(struct platform_device *pdev)
 
 		rc = devm_request_irq(&pdev->dev, irq, omap_dma_irq,
 				      IRQF_SHARED, "omap-dma-engine", od);
-		if (rc)
+		if (rc) {
+			omap_dma_free(od);
 			return rc;
+		}
 	}
 
 	if (omap_dma_glbl_read(od, CAPS_0) & CAPS_0_SUPPORT_LL123)
-- 
2.20.1

[PATCH 4.14 49/59] x86/uaccess: Dont leak the AC flags into __get_user() argument evaluation

[Greg Kroah-Hartman]

From: Peter Zijlstra <peterz@infradead.org>

[ Upstream commit 9b8bd476e78e89c9ea26c3b435ad0201c3d7dbf5 ]

Identical to __put_user(); the __get_user() argument evalution will too
leak UBSAN crud into the __uaccess_begin() / __uaccess_end() region.
While uncommon this was observed to happen for:

  drivers/xen/gntdev.c: if (__get_user(old_status, batch->status[i]))

where UBSAN added array bound checking.

This complements commit:

  6ae865615fc4 ("x86/uaccess: Dont leak the AC flag into __put_user() argument evaluation")

Tested-by Sedat Dilek <sedat.dilek@gmail.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: broonie@kernel.org
Cc: sfr@canb.auug.org.au
Cc: akpm@linux-foundation.org
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: mhocko@suse.cz
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20190829082445.GM2369@hirez.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/include/asm/uaccess.h | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index 4111edb3188e2..9718303410614 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -451,8 +451,10 @@ do {									\
 ({									\
 	int __gu_err;							\
 	__inttype(*(ptr)) __gu_val;					\
+	__typeof__(ptr) __gu_ptr = (ptr);				\
+	__typeof__(size) __gu_size = (size);				\
 	__uaccess_begin_nospec();					\
-	__get_user_size(__gu_val, (ptr), (size), __gu_err, -EFAULT);	\
+	__get_user_size(__gu_val, __gu_ptr, __gu_size, __gu_err, -EFAULT);	\
 	__uaccess_end();						\
 	(x) = (__force __typeof__(*(ptr)))__gu_val;			\
 	__builtin_expect(__gu_err, 0);					\
-- 
2.20.1

[PATCH 4.14 50/59] x86/hyper-v: Fix overflow bug in fill_gva_list()

[Greg Kroah-Hartman]

From: Tianyu Lan <Tianyu.Lan@microsoft.com>

[ Upstream commit 4030b4c585c41eeefec7bd20ce3d0e100a0f2e4d ]

When the 'start' parameter is >=  0xFF000000 on 32-bit
systems, or >= 0xFFFFFFFF'FF000000 on 64-bit systems,
fill_gva_list() gets into an infinite loop.

With such inputs, 'cur' overflows after adding HV_TLB_FLUSH_UNIT
and always compares as less than end.  Memory is filled with
guest virtual addresses until the system crashes.

Fix this by never incrementing 'cur' to be larger than 'end'.

Reported-by: Jong Hyun Park <park.jonghyun@yonsei.ac.kr>
Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 2ffd9e33ce4a ("x86/hyper-v: Use hypercall for remote TLB flush")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/hyperv/mmu.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/x86/hyperv/mmu.c b/arch/x86/hyperv/mmu.c
index 56c9ebac946fe..47718fff0b797 100644
--- a/arch/x86/hyperv/mmu.c
+++ b/arch/x86/hyperv/mmu.c
@@ -57,12 +57,14 @@ static inline int fill_gva_list(u64 gva_list[], int offset,
 		 * Lower 12 bits encode the number of additional
 		 * pages to flush (in addition to the 'cur' page).
 		 */
-		if (diff >= HV_TLB_FLUSH_UNIT)
+		if (diff >= HV_TLB_FLUSH_UNIT) {
 			gva_list[gva_n] |= ~PAGE_MASK;
-		else if (diff)
+			cur += HV_TLB_FLUSH_UNIT;
+		}  else if (diff) {
 			gva_list[gva_n] |= (diff - 1) >> PAGE_SHIFT;
+			cur = end;
+		}
 
-		cur += HV_TLB_FLUSH_UNIT;
 		gva_n++;
 
 	} while (cur < end);
-- 
2.20.1

[PATCH 4.14 51/59] keys: Fix missing null pointer check in request_key_auth_describe()

[Greg Kroah-Hartman]

From: Hillf Danton <hdanton@sina.com>

[ Upstream commit d41a3effbb53b1bcea41e328d16a4d046a508381 ]

If a request_key authentication token key gets revoked, there's a window in
which request_key_auth_describe() can see it with a NULL payload - but it
makes no check for this and something like the following oops may occur:

	BUG: Kernel NULL pointer dereference at 0x00000038
	Faulting instruction address: 0xc0000000004ddf30
	Oops: Kernel access of bad area, sig: 11 [#1]
	...
	NIP [...] request_key_auth_describe+0x90/0xd0
	LR [...] request_key_auth_describe+0x54/0xd0
	Call Trace:
	[...] request_key_auth_describe+0x54/0xd0 (unreliable)
	[...] proc_keys_show+0x308/0x4c0
	[...] seq_read+0x3d0/0x540
	[...] proc_reg_read+0x90/0x110
	[...] __vfs_read+0x3c/0x70
	[...] vfs_read+0xb4/0x1b0
	[...] ksys_read+0x7c/0x130
	[...] system_call+0x5c/0x70

Fix this by checking for a NULL pointer when describing such a key.

Also make the read routine check for a NULL pointer to be on the safe side.

[DH: Modified to not take already-held rcu lock and modified to also check
 in the read routine]

Fixes: 04c567d9313e ("[PATCH] Keys: Fix race between two instantiators of a key")
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 security/keys/request_key_auth.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/security/keys/request_key_auth.c b/security/keys/request_key_auth.c
index 5e515791ccd11..1d34b2a5f485e 100644
--- a/security/keys/request_key_auth.c
+++ b/security/keys/request_key_auth.c
@@ -71,6 +71,9 @@ static void request_key_auth_describe(const struct key *key,
 {
 	struct request_key_auth *rka = get_request_key_auth(key);
 
+	if (!rka)
+		return;
+
 	seq_puts(m, "key:");
 	seq_puts(m, key->description);
 	if (key_is_positive(key))
@@ -88,6 +91,9 @@ static long request_key_auth_read(const struct key *key,
 	size_t datalen;
 	long ret;
 
+	if (!rka)
+		return -EKEYREVOKED;
+
 	datalen = rka->callout_len;
 	ret = datalen;
 
-- 
2.20.1

[PATCH 4.14 52/59] iommu/amd: Flush old domains in kdump kernel

[Greg Kroah-Hartman]

From: Stuart Hayes <stuart.w.hayes@gmail.com>

[ Upstream commit 36b7200f67dfe75b416b5281ed4ace9927b513bc ]

When devices are attached to the amd_iommu in a kdump kernel, the old device
table entries (DTEs), which were copied from the crashed kernel, will be
overwritten with a new domain number.  When the new DTE is written, the IOMMU
is told to flush the DTE from its internal cache--but it is not told to flush
the translation cache entries for the old domain number.

Without this patch, AMD systems using the tg3 network driver fail when kdump
tries to save the vmcore to a network system, showing network timeouts and
(sometimes) IOMMU errors in the kernel log.

This patch will flush IOMMU translation cache entries for the old domain when
a DTE gets overwritten with a new domain number.

Signed-off-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Fixes: 3ac3e5ee5ed5 ('iommu/amd: Copy old trans table from old kernel')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/amd_iommu.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index 684f7cdd814b6..822c85226a29f 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -1150,6 +1150,17 @@ static void amd_iommu_flush_tlb_all(struct amd_iommu *iommu)
 	iommu_completion_wait(iommu);
 }
 
+static void amd_iommu_flush_tlb_domid(struct amd_iommu *iommu, u32 dom_id)
+{
+	struct iommu_cmd cmd;
+
+	build_inv_iommu_pages(&cmd, 0, CMD_INV_IOMMU_ALL_PAGES_ADDRESS,
+			      dom_id, 1);
+	iommu_queue_command(iommu, &cmd);
+
+	iommu_completion_wait(iommu);
+}
+
 static void amd_iommu_flush_all(struct amd_iommu *iommu)
 {
 	struct iommu_cmd cmd;
@@ -1835,6 +1846,7 @@ static void set_dte_entry(u16 devid, struct protection_domain *domain, bool ats)
 {
 	u64 pte_root = 0;
 	u64 flags = 0;
+	u32 old_domid;
 
 	if (domain->mode != PAGE_MODE_NONE)
 		pte_root = iommu_virt_to_phys(domain->pt_root);
@@ -1877,8 +1889,20 @@ static void set_dte_entry(u16 devid, struct protection_domain *domain, bool ats)
 	flags &= ~DEV_DOMID_MASK;
 	flags |= domain->id;
 
+	old_domid = amd_iommu_dev_table[devid].data[1] & DEV_DOMID_MASK;
 	amd_iommu_dev_table[devid].data[1]  = flags;
 	amd_iommu_dev_table[devid].data[0]  = pte_root;
+
+	/*
+	 * A kdump kernel might be replacing a domain ID that was copied from
+	 * the previous kernel--if so, it needs to flush the translation cache
+	 * entries for the old domain ID that is being overwritten
+	 */
+	if (old_domid) {
+		struct amd_iommu *iommu = amd_iommu_rlookup_table[devid];
+
+		amd_iommu_flush_tlb_domid(iommu, old_domid);
+	}
 }
 
 static void clear_dte_entry(u16 devid)
-- 
2.20.1

[PATCH 4.14 53/59] iommu/amd: Fix race in increase_address_space()

[Greg Kroah-Hartman]

From: Joerg Roedel <jroedel@suse.de>

[ Upstream commit 754265bcab78a9014f0f99cd35e0d610fcd7dfa7 ]

After the conversion to lock-less dma-api call the
increase_address_space() function can be called without any
locking. Multiple CPUs could potentially race for increasing
the address space, leading to invalid domain->mode settings
and invalid page-tables. This has been happening in the wild
under high IO load and memory pressure.

Fix the race by locking this operation. The function is
called infrequently so that this does not introduce
a performance regression in the dma-api path again.

Reported-by: Qian Cai <cai@lca.pw>
Fixes: 256e4621c21a ('iommu/amd: Make use of the generic IOVA allocator')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iommu/amd_iommu.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c
index 822c85226a29f..a1174e61daf4e 100644
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -1337,18 +1337,21 @@ static void domain_flush_devices(struct protection_domain *domain)
  * another level increases the size of the address space by 9 bits to a size up
  * to 64 bits.
  */
-static bool increase_address_space(struct protection_domain *domain,
+static void increase_address_space(struct protection_domain *domain,
 				   gfp_t gfp)
 {
+	unsigned long flags;
 	u64 *pte;
 
-	if (domain->mode == PAGE_MODE_6_LEVEL)
+	spin_lock_irqsave(&domain->lock, flags);
+
+	if (WARN_ON_ONCE(domain->mode == PAGE_MODE_6_LEVEL))
 		/* address space already 64 bit large */
-		return false;
+		goto out;
 
 	pte = (void *)get_zeroed_page(gfp);
 	if (!pte)
-		return false;
+		goto out;
 
 	*pte             = PM_LEVEL_PDE(domain->mode,
 					iommu_virt_to_phys(domain->pt_root));
@@ -1356,7 +1359,10 @@ static bool increase_address_space(struct protection_domain *domain,
 	domain->mode    += 1;
 	domain->updated  = true;
 
-	return true;
+out:
+	spin_unlock_irqrestore(&domain->lock, flags);
+
+	return;
 }
 
 static u64 *alloc_pte(struct protection_domain *domain,
-- 
2.20.1

[PATCH 4.14 54/59] PCI: kirin: Fix section mismatch warning

[Greg Kroah-Hartman]

From: Nathan Chancellor <natechancellor@gmail.com>

commit 6870b673509779195cab300aedc844b352d9cfbc upstream.

The PCI kirin driver compilation produces the following section mismatch
warning:

WARNING: vmlinux.o(.text+0x4758cc): Section mismatch in reference from
the function kirin_pcie_probe() to the function
.init.text:kirin_add_pcie_port()
The function kirin_pcie_probe() references
the function __init kirin_add_pcie_port().
This is often because kirin_pcie_probe lacks a __init
annotation or the annotation of kirin_add_pcie_port is wrong.

Remove '__init' from kirin_add_pcie_port() to fix it.

Fixes: fc5165db245a ("PCI: kirin: Add HiSilicon Kirin SoC PCIe controller driver")
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pci/dwc/pcie-kirin.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/pci/dwc/pcie-kirin.c
+++ b/drivers/pci/dwc/pcie-kirin.c
@@ -449,8 +449,8 @@ static const struct dw_pcie_host_ops kir
 	.host_init = kirin_pcie_host_init,
 };
 
-static int __init kirin_add_pcie_port(struct dw_pcie *pci,
-				      struct platform_device *pdev)
+static int kirin_add_pcie_port(struct dw_pcie *pci,
+			       struct platform_device *pdev)
 {
 	pci->pp.ops = &kirin_pcie_host_ops;
 

[PATCH 4.14 55/59] floppy: fix usercopy direction

[Greg Kroah-Hartman]

From: Jann Horn <jannh@google.com>

commit 52f6f9d74f31078964ca1574f7bb612da7877ac8 upstream.

As sparse points out, these two copy_from_user() should actually be
copy_to_user().

Fixes: 229b53c9bf4e ("take floppy compat ioctls to sodding floppy.c")
Cc: stable@vger.kernel.org
Acked-by: Alexander Popov <alex.popov@linux.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/block/floppy.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -3786,7 +3786,7 @@ static int compat_getdrvprm(int drive,
 	v.native_format = UDP->native_format;
 	mutex_unlock(&floppy_mutex);
 
-	if (copy_from_user(arg, &v, sizeof(struct compat_floppy_drive_params)))
+	if (copy_to_user(arg, &v, sizeof(struct compat_floppy_drive_params)))
 		return -EFAULT;
 	return 0;
 }
@@ -3822,7 +3822,7 @@ static int compat_getdrvstat(int drive,
 	v.bufblocks = UDRS->bufblocks;
 	mutex_unlock(&floppy_mutex);
 
-	if (copy_from_user(arg, &v, sizeof(struct compat_floppy_drive_struct)))
+	if (copy_to_user(arg, &v, sizeof(struct compat_floppy_drive_struct)))
 		return -EFAULT;
 	return 0;
 Eintr:

[PATCH 4.14 56/59] binfmt_elf: move brk out of mmap when doing direct loader exec

[Greg Kroah-Hartman]

From: Kees Cook <keescook@chromium.org>

commit bbdc6076d2e5d07db44e74c11b01a3e27ab90b32 upstream.

Commmit eab09532d400 ("binfmt_elf: use ELF_ET_DYN_BASE only for PIE"),
made changes in the rare case when the ELF loader was directly invoked
(e.g to set a non-inheritable LD_LIBRARY_PATH, testing new versions of
the loader), by moving into the mmap region to avoid both ET_EXEC and
PIE binaries.  This had the effect of also moving the brk region into
mmap, which could lead to the stack and brk being arbitrarily close to
each other.  An unlucky process wouldn't get its requested stack size
and stack allocations could end up scribbling on the heap.

This is illustrated here.  In the case of using the loader directly, brk
(so helpfully identified as "[heap]") is allocated with the _loader_ not
the binary.  For example, with ASLR entirely disabled, you can see this
more clearly:

$ /bin/cat /proc/self/maps
555555554000-55555555c000 r-xp 00000000 ... /bin/cat
55555575b000-55555575c000 r--p 00007000 ... /bin/cat
55555575c000-55555575d000 rw-p 00008000 ... /bin/cat
55555575d000-55555577e000 rw-p 00000000 ... [heap]
...
7ffff7ff7000-7ffff7ffa000 r--p 00000000 ... [vvar]
7ffff7ffa000-7ffff7ffc000 r-xp 00000000 ... [vdso]
7ffff7ffc000-7ffff7ffd000 r--p 00027000 ... /lib/x86_64-linux-gnu/ld-2.27.so
7ffff7ffd000-7ffff7ffe000 rw-p 00028000 ... /lib/x86_64-linux-gnu/ld-2.27.so
7ffff7ffe000-7ffff7fff000 rw-p 00000000 ...
7ffffffde000-7ffffffff000 rw-p 00000000 ... [stack]

$ /lib/x86_64-linux-gnu/ld-2.27.so /bin/cat /proc/self/maps
...
7ffff7bcc000-7ffff7bd4000 r-xp 00000000 ... /bin/cat
7ffff7bd4000-7ffff7dd3000 ---p 00008000 ... /bin/cat
7ffff7dd3000-7ffff7dd4000 r--p 00007000 ... /bin/cat
7ffff7dd4000-7ffff7dd5000 rw-p 00008000 ... /bin/cat
7ffff7dd5000-7ffff7dfc000 r-xp 00000000 ... /lib/x86_64-linux-gnu/ld-2.27.so
7ffff7fb2000-7ffff7fd6000 rw-p 00000000 ...
7ffff7ff7000-7ffff7ffa000 r--p 00000000 ... [vvar]
7ffff7ffa000-7ffff7ffc000 r-xp 00000000 ... [vdso]
7ffff7ffc000-7ffff7ffd000 r--p 00027000 ... /lib/x86_64-linux-gnu/ld-2.27.so
7ffff7ffd000-7ffff7ffe000 rw-p 00028000 ... /lib/x86_64-linux-gnu/ld-2.27.so
7ffff7ffe000-7ffff8020000 rw-p 00000000 ... [heap]
7ffffffde000-7ffffffff000 rw-p 00000000 ... [stack]

The solution is to move brk out of mmap and into ELF_ET_DYN_BASE since
nothing is there in the direct loader case (and ET_EXEC is still far
away at 0x400000).  Anything that ran before should still work (i.e.
the ultimately-launched binary already had the brk very far from its
text, so this should be no different from a COMPAT_BRK standpoint).  The
only risk I see here is that if someone started to suddenly depend on
the entire memory space lower than the mmap region being available when
launching binaries via a direct loader execs which seems highly
unlikely, I'd hope: this would mean a binary would _not_ work when
exec()ed normally.

(Note that this is only done under CONFIG_ARCH_HAS_ELF_RANDOMIZATION
when randomization is turned on.)

Link: http://lkml.kernel.org/r/20190422225727.GA21011@beast
Link: https://lkml.kernel.org/r/CAGXu5jJ5sj3emOT2QPxQkNQk0qbU6zEfu9=Omfhx_p0nCKPSjA@mail.gmail.com
Fixes: eab09532d400 ("binfmt_elf: use ELF_ET_DYN_BASE only for PIE")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Ali Saidi <alisaidi@amazon.com>
Cc: Ali Saidi <alisaidi@amazon.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/binfmt_elf.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -1116,6 +1116,17 @@ static int load_elf_binary(struct linux_
 	current->mm->start_stack = bprm->p;
 
 	if ((current->flags & PF_RANDOMIZE) && (randomize_va_space > 1)) {
+		/*
+		 * For architectures with ELF randomization, when executing
+		 * a loader directly (i.e. no interpreter listed in ELF
+		 * headers), move the brk area out of the mmap region
+		 * (since it grows up, and may collide early with the stack
+		 * growing down), and into the unused ELF_ET_DYN_BASE region.
+		 */
+		if (IS_ENABLED(CONFIG_ARCH_HAS_ELF_RANDOMIZE) && !interpreter)
+			current->mm->brk = current->mm->start_brk =
+				ELF_ET_DYN_BASE;
+
 		current->mm->brk = current->mm->start_brk =
 			arch_randomize_brk(current->mm);
 #ifdef compat_brk_randomized

[PATCH 4.14 57/59] tcp: Reset send_head when removing skb from write-queue

[Greg Kroah-Hartman]

From: Christoph Paasch <cpaasch@apple.com>

syzkaller is not happy since commit fdfc5c8594c2 ("tcp: remove empty skb
from write queue in error cases"):

CPU: 1 PID: 13814 Comm: syz-executor.4 Not tainted 4.14.143 #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011
task: ffff888040105c00 task.stack: ffff8880649c0000
RIP: 0010:tcp_sendmsg_locked+0x6b4/0x4390 net/ipv4/tcp.c:1350
RSP: 0018:ffff8880649cf718 EFLAGS: 00010206
RAX: 0000000000000014 RBX: 000000000000001e RCX: ffffc90000717000
RDX: 0000000000000077 RSI: ffffffff82e760f7 RDI: 00000000000000a0
RBP: ffff8880649cfaa8 R08: 1ffff1100c939e7a R09: ffff8880401063c8
R10: 0000000000000003 R11: 0000000000000001 R12: dffffc0000000000
R13: ffff888043d74750 R14: ffff888043d74500 R15: 000000000000001e
FS:  00007f0afcb6d700(0000) GS:ffff88806cf00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2ca22000 CR3: 0000000040496004 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 tcp_sendmsg+0x2a/0x40 net/ipv4/tcp.c:1533
 inet_sendmsg+0x173/0x4e0 net/ipv4/af_inet.c:784
 sock_sendmsg_nosec net/socket.c:646 [inline]
 sock_sendmsg+0xc3/0x100 net/socket.c:656
 SYSC_sendto+0x35d/0x5e0 net/socket.c:1766
 do_syscall_64+0x241/0x680 arch/x86/entry/common.c:292
 entry_SYSCALL_64_after_hwframe+0x42/0xb7

The problem is that we are removing an skb from the write-queue that
could have been referenced by the sk_send_head. Thus, we need to check
for the send_head's sanity after removing it.

This patch needs to be backported only to 4.14 and older (among those
that applied the backport of fdfc5c8594c2).

Fixes: fdfc5c8594c2 ("tcp: remove empty skb from write queue in error cases")
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Vladimir Rutsky <rutsky@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/ipv4/tcp.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -924,8 +924,7 @@ static void tcp_remove_empty_skb(struct
 {
 	if (skb && !skb->len) {
 		tcp_unlink_write_queue(skb, sk);
-		if (tcp_write_queue_empty(sk))
-			tcp_chrono_stop(sk, TCP_CHRONO_BUSY);
+		tcp_check_send_head(sk, skb);
 		sk_wmem_free_skb(sk, skb);
 	}
 }

[PATCH 4.14 58/59] tcp: Dont dequeue SYN/FIN-segments from write-queue

[Greg Kroah-Hartman]

From: Christoph Paasch <cpaasch@apple.com>

If a SYN/FIN-segment is on the write-queue, skb->len is 0, but the
segment actually has been transmitted. end_seq and seq of the tcp_skb_cb
in that case will indicate this difference.

We should not remove such segments from the write-queue as we might be
in SYN_SENT-state and a retransmission-timer is running. When that one
fires, packets_out will be 1, but the write-queue would be empty,
resulting in:

[   61.280214] ------------[ cut here ]------------
[   61.281307] WARNING: CPU: 0 PID: 0 at net/ipv4/tcp_timer.c:429 tcp_retransmit_timer+0x18f9/0x2660
[   61.283498] Modules linked in:
[   61.284084] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.142 #58
[   61.285214] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011
[   61.286644] task: ffffffff8401e1c0 task.stack: ffffffff84000000
[   61.287758] RIP: 0010:tcp_retransmit_timer+0x18f9/0x2660
[   61.288715] RSP: 0018:ffff88806ce07cb8 EFLAGS: 00010206
[   61.289669] RAX: ffffffff8401e1c0 RBX: ffff88805c998b00 RCX: 0000000000000006
[   61.290968] RDX: 0000000000000100 RSI: 0000000000000000 RDI: ffff88805c9994d8
[   61.292314] RBP: ffff88805c99919a R08: ffff88807fff901c R09: ffff88807fff9008
[   61.293547] R10: ffff88807fff9017 R11: ffff88807fff9010 R12: ffff88805c998b30
[   61.294834] R13: ffffffff844b9380 R14: 0000000000000000 R15: ffff88805c99930c
[   61.296086] FS:  0000000000000000(0000) GS:ffff88806ce00000(0000) knlGS:0000000000000000
[   61.297523] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   61.298646] CR2: 00007f721da50ff8 CR3: 0000000004014002 CR4: 00000000001606f0
[   61.299944] Call Trace:
[   61.300403]  <IRQ>
[   61.300806]  ? kvm_sched_clock_read+0x21/0x30
[   61.301689]  ? sched_clock+0x5/0x10
[   61.302433]  ? sched_clock_cpu+0x18/0x170
[   61.303173]  tcp_write_timer_handler+0x2c1/0x7a0
[   61.304038]  tcp_write_timer+0x13e/0x160
[   61.304794]  call_timer_fn+0x14a/0x5f0
[   61.305480]  ? tcp_write_timer_handler+0x7a0/0x7a0
[   61.306364]  ? __next_timer_interrupt+0x140/0x140
[   61.307229]  ? _raw_spin_unlock_irq+0x24/0x40
[   61.308033]  ? tcp_write_timer_handler+0x7a0/0x7a0
[   61.308887]  ? tcp_write_timer_handler+0x7a0/0x7a0
[   61.309760]  run_timer_softirq+0xc41/0x1080
[   61.310539]  ? trigger_dyntick_cpu.isra.33+0x180/0x180
[   61.311506]  ? ktime_get+0x13f/0x1c0
[   61.312232]  ? clockevents_program_event+0x10d/0x2f0
[   61.313158]  __do_softirq+0x20b/0x96b
[   61.313889]  irq_exit+0x1a7/0x1e0
[   61.314513]  smp_apic_timer_interrupt+0xfc/0x4d0
[   61.315386]  apic_timer_interrupt+0x8f/0xa0
[   61.316129]  </IRQ>

Followed by a panic.

So, before removing an skb with skb->len == 0, let's make sure that the
skb is really empty by checking the end_seq and seq.

This patch needs to be backported only to 4.14 and older (among those
that applied the backport of fdfc5c8594c2).

Fixes: fdfc5c8594c2 ("tcp: remove empty skb from write queue in error cases")
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Vladimir Rutsky <rutsky@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/ipv4/tcp.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -922,7 +922,8 @@ static int tcp_send_mss(struct sock *sk,
  */
 static void tcp_remove_empty_skb(struct sock *sk, struct sk_buff *skb)
 {
-	if (skb && !skb->len) {
+	if (skb && !skb->len &&
+	    TCP_SKB_CB(skb)->end_seq == TCP_SKB_CB(skb)->seq) {
 		tcp_unlink_write_queue(skb, sk);
 		tcp_check_send_head(sk, skb);
 		sk_wmem_free_skb(sk, skb);

[PATCH 4.14 59/59] media: technisat-usb2: break out of loop at end of buffer

[Greg Kroah-Hartman]

From: Sean Young <sean@mess.org>

commit 0c4df39e504bf925ab666132ac3c98d6cbbe380b upstream.

Ensure we do not access the buffer beyond the end if no 0xff byte
is encountered.

Reported-by: syzbot+eaaaf38a95427be88f4b@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/dvb-usb/technisat-usb2.c |   22 ++++++++++------------
 1 file changed, 10 insertions(+), 12 deletions(-)

--- a/drivers/media/usb/dvb-usb/technisat-usb2.c
+++ b/drivers/media/usb/dvb-usb/technisat-usb2.c
@@ -607,10 +607,9 @@ static int technisat_usb2_frontend_attac
 static int technisat_usb2_get_ir(struct dvb_usb_device *d)
 {
 	struct technisat_usb2_state *state = d->priv;
-	u8 *buf = state->buf;
-	u8 *b;
-	int ret;
 	struct ir_raw_event ev;
+	u8 *buf = state->buf;
+	int i, ret;
 
 	buf[0] = GET_IR_DATA_VENDOR_REQUEST;
 	buf[1] = 0x08;
@@ -646,26 +645,25 @@ unlock:
 		return 0; /* no key pressed */
 
 	/* decoding */
-	b = buf+1;
 
 #if 0
 	deb_rc("RC: %d ", ret);
-	debug_dump(b, ret, deb_rc);
+	debug_dump(buf + 1, ret, deb_rc);
 #endif
 
 	ev.pulse = 0;
-	while (1) {
-		ev.pulse = !ev.pulse;
-		ev.duration = (*b * FIRMWARE_CLOCK_DIVISOR * FIRMWARE_CLOCK_TICK) / 1000;
-		ir_raw_event_store(d->rc_dev, &ev);
-
-		b++;
-		if (*b == 0xff) {
+	for (i = 1; i < ARRAY_SIZE(state->buf); i++) {
+		if (buf[i] == 0xff) {
 			ev.pulse = 0;
 			ev.duration = 888888*2;
 			ir_raw_event_store(d->rc_dev, &ev);
 			break;
 		}
+
+		ev.pulse = !ev.pulse;
+		ev.duration = (buf[i] * FIRMWARE_CLOCK_DIVISOR *
+			       FIRMWARE_CLOCK_TICK) / 1000;
+		ir_raw_event_store(d->rc_dev, &ev);
 	}
 
 	ir_raw_event_handle(d->rc_dev);

Re: [PATCH 4.14 00/59] 4.14.146-stable review

[kernelci.org bot]

stable-rc/linux-4.14.y boot: 65 boots: 0 failed, 65 passed (v4.14.145-60-g981030d9563c)

Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.14.y/kernel/v4.14.145-60-g981030d9563c/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.14.y/kernel/v4.14.145-60-g981030d9563c/

Tree: stable-rc
Branch: linux-4.14.y
Git Describe: v4.14.145-60-g981030d9563c
Git Commit: 981030d9563ce66bc738ff8fee0ed8c81922904b
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 32 unique boards, 15 SoC families, 10 builds out of 201

---
For more info write to <info@kernelci.org>

Re: [PATCH 4.14 00/59] 4.14.146-stable review

[Naresh Kamboju]

On Fri, 20 Sep 2019 at 03:47, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 4.14.146 release.
> There are 59 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat 21 Sep 2019 09:44:25 PM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.146-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 4.14.146-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.14.y
git commit: 981030d9563ce66bc738ff8fee0ed8c81922904b
git describe: v4.14.145-60-g981030d9563c
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.14-oe/build/v4.14.145-60-g981030d9563c


No regressions (compared to build v4.14.145)


No fixes (compared to build v4.14.145)

Ran 22586 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-timers-tests
* perf
* spectre-meltdown-checker-test
* ltp-fs-tests
* ltp-syscalls-tests
* network-basic-tests
* v4l2-compliance
* ltp-open-posix-tests
* kvm-unit-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
* ssuite

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 4.14 00/59] 4.14.146-stable review

[Jon Hunter]

On 19/09/2019 23:03, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.146 release.
> There are 59 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat 21 Sep 2019 09:44:25 PM UTC.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.146-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v4.14:
    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    24 tests:	24 pass, 0 fail

Linux version:	4.14.146-rc1-g981030d9563c
Boards tested:	tegra124-jetson-tk1, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Cheers
Jon

-- 
nvpublic

Re: [PATCH 4.14 00/59] 4.14.146-stable review

[Jon Hunter]

On 19/09/2019 23:03, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.146 release.
> There are 59 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat 21 Sep 2019 09:44:25 PM UTC.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.146-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v4.14:
    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    24 tests:	24 pass, 0 fail

Linux version:	4.14.146-rc1-g981030d9563c
Boards tested:	tegra124-jetson-tk1, tegra20-ventana,
                tegra210-p2371-2180, tegra30-cardhu-a04

Cheers
Jon

-- 
nvpublic

Re: [PATCH 4.14 00/59] 4.14.146-stable review

[Guenter Roeck]

On Fri, Sep 20, 2019 at 12:03:15AM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.146 release.
> There are 59 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat 21 Sep 2019 09:44:25 PM UTC.
> Anything received after that time might be too late.
> 

Build results:
	total: 172 pass: 172 fail: 0
Qemu test results:
	total: 372 pass: 372 fail: 0

Guenter

Re: [PATCH 4.14 00/59] 4.14.146-stable review

[shuah]

On 9/19/19 4:03 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.146 release.
> There are 59 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sat 21 Sep 2019 09:44:25 PM UTC.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.146-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah