[PATCH AUTOSEL 4.19 01/50] drm/bridge: tc358767: Increase AUX transfer length limit

[PATCH AUTOSEL 4.19 01/50] drm/bridge: tc358767: Increase AUX transfer length limit

[Sasha Levin]

From: Andrey Smirnov <andrew.smirnov@gmail.com>

[ Upstream commit e0655feaec62d5139b6b13a7b1bbb1ab8f1c2d83 ]

According to the datasheet tc358767 can transfer up to 16 bytes via
its AUX channel, so the artificial limit of 8 appears to be too
low. However only up to 15-bytes seem to be actually supported and
trying to use 16-byte transfers results in transfers failing
sporadically (with bogus status in case of I2C transfers), so limit it
to 15.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619052716.16831-9-andrew.smirnov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/tc358767.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index aaca5248da070..d728b6cf61096 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -302,7 +302,7 @@ static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
 			       struct drm_dp_aux_msg *msg)
 {
 	struct tc_data *tc = aux_to_tc(aux);
-	size_t size = min_t(size_t, 8, msg->size);
+	size_t size = min_t(size_t, DP_AUX_MAX_PAYLOAD_BYTES - 1, msg->size);
 	u8 request = msg->request & ~DP_AUX_I2C_MOT;
 	u8 *buf = msg->buffer;
 	u32 tmp = 0;
-- 
2.20.1

[PATCH AUTOSEL 4.19 01/50] drm/bridge: tc358767: Increase AUX transfer length limit

[Sasha Levin]

From: Andrey Smirnov <andrew.smirnov@gmail.com>

[ Upstream commit e0655feaec62d5139b6b13a7b1bbb1ab8f1c2d83 ]

According to the datasheet tc358767 can transfer up to 16 bytes via
its AUX channel, so the artificial limit of 8 appears to be too
low. However only up to 15-bytes seem to be actually supported and
trying to use 16-byte transfers results in transfers failing
sporadically (with bogus status in case of I2C transfers), so limit it
to 15.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619052716.16831-9-andrew.smirnov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/tc358767.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index aaca5248da070..d728b6cf61096 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -302,7 +302,7 @@ static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
 			       struct drm_dp_aux_msg *msg)
 {
 	struct tc_data *tc = aux_to_tc(aux);
-	size_t size = min_t(size_t, 8, msg->size);
+	size_t size = min_t(size_t, DP_AUX_MAX_PAYLOAD_BYTES - 1, msg->size);
 	u8 request = msg->request & ~DP_AUX_I2C_MOT;
 	u8 *buf = msg->buffer;
 	u32 tmp = 0;
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.19 02/50] drm/bridge: adv7511: Attach to DSI host at probe time

[Sasha Levin]

From: Matt Redfearn <matt.redfearn@thinci.com>

[ Upstream commit 83f35bc3a852f1c3892c7474998c5cec707c7ba3 ]

In contrast to all of the DSI panel drivers in drivers/gpu/drm/panel
which attach to the DSI host via mipi_dsi_attach() at probe time, the
ADV7533 bridge device does not. Instead it defers this to the point that
the upstream device connects to its bridge via drm_bridge_attach().
The generic Synopsys MIPI DSI host driver does not register it's own
drm_bridge until the MIPI DSI has attached. But it does not call
drm_bridge_attach() on the downstream device until the upstream device
has attached. This leads to a chicken and the egg failure and the DRM
pipeline does not complete.
Since all other mipi_dsi_device drivers call mipi_dsi_attach() in
probe(), make the adv7533 mipi_dsi_device do the same. This ensures that
the Synopsys MIPI DSI host registers it's bridge such that it is
available for the upstream device to connect to.

Signed-off-by: Matt Redfearn <matt.redfearn@thinci.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190627151740.2277-1-matt.redfearn@thinci.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index e7ddd3e3db920..807827bd910e5 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -874,9 +874,6 @@ static int adv7511_bridge_attach(struct drm_bridge *bridge)
 				 &adv7511_connector_helper_funcs);
 	drm_connector_attach_encoder(&adv->connector, bridge->encoder);
 
-	if (adv->type == ADV7533)
-		ret = adv7533_attach_dsi(adv);
-
 	if (adv->i2c_main->irq)
 		regmap_write(adv->regmap, ADV7511_REG_INT_ENABLE(0),
 			     ADV7511_INT0_HPD);
@@ -1222,8 +1219,17 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 	drm_bridge_add(&adv7511->bridge);
 
 	adv7511_audio_init(dev, adv7511);
+
+	if (adv7511->type == ADV7533) {
+		ret = adv7533_attach_dsi(adv7511);
+		if (ret)
+			goto err_remove_bridge;
+	}
+
 	return 0;
 
+err_remove_bridge:
+	drm_bridge_remove(&adv7511->bridge);
 err_unregister_cec:
 	i2c_unregister_device(adv7511->i2c_cec);
 	if (adv7511->cec_clk)
-- 
2.20.1

[PATCH AUTOSEL 4.19 02/50] drm/bridge: adv7511: Attach to DSI host at probe time

[Sasha Levin]

From: Matt Redfearn <matt.redfearn@thinci.com>

[ Upstream commit 83f35bc3a852f1c3892c7474998c5cec707c7ba3 ]

In contrast to all of the DSI panel drivers in drivers/gpu/drm/panel
which attach to the DSI host via mipi_dsi_attach() at probe time, the
ADV7533 bridge device does not. Instead it defers this to the point that
the upstream device connects to its bridge via drm_bridge_attach().
The generic Synopsys MIPI DSI host driver does not register it's own
drm_bridge until the MIPI DSI has attached. But it does not call
drm_bridge_attach() on the downstream device until the upstream device
has attached. This leads to a chicken and the egg failure and the DRM
pipeline does not complete.
Since all other mipi_dsi_device drivers call mipi_dsi_attach() in
probe(), make the adv7533 mipi_dsi_device do the same. This ensures that
the Synopsys MIPI DSI host registers it's bridge such that it is
available for the upstream device to connect to.

Signed-off-by: Matt Redfearn <matt.redfearn@thinci.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190627151740.2277-1-matt.redfearn@thinci.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index e7ddd3e3db920..807827bd910e5 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -874,9 +874,6 @@ static int adv7511_bridge_attach(struct drm_bridge *bridge)
 				 &adv7511_connector_helper_funcs);
 	drm_connector_attach_encoder(&adv->connector, bridge->encoder);
 
-	if (adv->type == ADV7533)
-		ret = adv7533_attach_dsi(adv);
-
 	if (adv->i2c_main->irq)
 		regmap_write(adv->regmap, ADV7511_REG_INT_ENABLE(0),
 			     ADV7511_INT0_HPD);
@@ -1222,8 +1219,17 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 	drm_bridge_add(&adv7511->bridge);
 
 	adv7511_audio_init(dev, adv7511);
+
+	if (adv7511->type == ADV7533) {
+		ret = adv7533_attach_dsi(adv7511);
+		if (ret)
+			goto err_remove_bridge;
+	}
+
 	return 0;
 
+err_remove_bridge:
+	drm_bridge_remove(&adv7511->bridge);
 err_unregister_cec:
 	i2c_unregister_device(adv7511->i2c_cec);
 	if (adv7511->cec_clk)
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.19 03/50] drm/kms: Catch mode_object lifetime errors

[Sasha Levin]

From: Daniel Vetter <daniel.vetter@ffwll.ch>

[ Upstream commit 4f5368b5541a902f6596558b05f5c21a9770dd32 ]

Only dynamic mode objects, i.e. those which are refcounted and have a free
callback, can be added while the overall drm_device is visible to
userspace. All others must be added before drm_dev_register and
removed after drm_dev_unregister.

Small issue around drivers still using the load/unload callbacks, we
need to make sure we set dev->registered so that load/unload code in
these callbacks doesn't trigger false warnings. Only a small
adjustement in drm_dev_register was needed.

Motivated by some irc discussions about object ids of dynamic objects
like blobs become invalid, and me going on a bit an audit spree.

Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614061723.1173-1-daniel.vetter@ffwll.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/drm_drv.c         | 4 ++--
 drivers/gpu/drm/drm_mode_object.c | 4 ++++
 2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
index d8ae4ca129c70..1df30ef9f455a 100644
--- a/drivers/gpu/drm/drm_drv.c
+++ b/drivers/gpu/drm/drm_drv.c
@@ -810,14 +810,14 @@ int drm_dev_register(struct drm_device *dev, unsigned long flags)
 	if (ret)
 		goto err_minors;
 
-	dev->registered = true;
-
 	if (dev->driver->load) {
 		ret = dev->driver->load(dev, flags);
 		if (ret)
 			goto err_minors;
 	}
 
+	dev->registered = true;
+
 	if (drm_core_check_feature(dev, DRIVER_MODESET))
 		drm_modeset_register_all(dev);
 
diff --git a/drivers/gpu/drm/drm_mode_object.c b/drivers/gpu/drm/drm_mode_object.c
index 57cc9aa6683a0..30bf0d08dbf2f 100644
--- a/drivers/gpu/drm/drm_mode_object.c
+++ b/drivers/gpu/drm/drm_mode_object.c
@@ -37,6 +37,8 @@ int __drm_mode_object_add(struct drm_device *dev, struct drm_mode_object *obj,
 {
 	int ret;
 
+	WARN_ON(dev->registered && !obj_free_cb);
+
 	mutex_lock(&dev->mode_config.idr_mutex);
 	ret = idr_alloc(&dev->mode_config.crtc_idr, register_obj ? obj : NULL, 1, 0, GFP_KERNEL);
 	if (ret >= 0) {
@@ -96,6 +98,8 @@ void drm_mode_object_register(struct drm_device *dev,
 void drm_mode_object_unregister(struct drm_device *dev,
 				struct drm_mode_object *object)
 {
+	WARN_ON(dev->registered && !object->free_cb);
+
 	mutex_lock(&dev->mode_config.idr_mutex);
 	if (object->id) {
 		idr_remove(&dev->mode_config.crtc_idr, object->id);
-- 
2.20.1

[PATCH AUTOSEL 4.19 04/50] drm/panel: simple: fix AUO g185han01 horizontal blanking

[Sasha Levin]

From: Lucas Stach <l.stach@pengutronix.de>

[ Upstream commit f8c6bfc612b56f02e1b8fae699dff12738aaf889 ]

The horizontal blanking periods are too short, as the values are
specified for a single LVDS channel. Since this panel is dual LVDS
they need to be doubled. With this change the panel reaches its
nominal vrefresh rate of 60Fps, instead of the 64Fps with the
current wrong blanking.

Philipp Zabel added:
The datasheet specifies 960 active clocks + 40/128/160 clocks blanking
on each of the two LVDS channels (min/typical/max), so doubled this is
now correct.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1562764060.23869.12.camel@pengutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/panel/panel-simple.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 5fd94e2060297..654fea2b43124 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -689,9 +689,9 @@ static const struct panel_desc auo_g133han01 = {
 static const struct display_timing auo_g185han01_timings = {
 	.pixelclock = { 120000000, 144000000, 175000000 },
 	.hactive = { 1920, 1920, 1920 },
-	.hfront_porch = { 18, 60, 74 },
-	.hback_porch = { 12, 44, 54 },
-	.hsync_len = { 10, 24, 32 },
+	.hfront_porch = { 36, 120, 148 },
+	.hback_porch = { 24, 88, 108 },
+	.hsync_len = { 20, 48, 64 },
 	.vactive = { 1080, 1080, 1080 },
 	.vfront_porch = { 6, 10, 40 },
 	.vback_porch = { 2, 5, 20 },
-- 
2.20.1

[PATCH AUTOSEL 4.19 04/50] drm/panel: simple: fix AUO g185han01 horizontal blanking

[Sasha Levin]

From: Lucas Stach <l.stach@pengutronix.de>

[ Upstream commit f8c6bfc612b56f02e1b8fae699dff12738aaf889 ]

The horizontal blanking periods are too short, as the values are
specified for a single LVDS channel. Since this panel is dual LVDS
they need to be doubled. With this change the panel reaches its
nominal vrefresh rate of 60Fps, instead of the 64Fps with the
current wrong blanking.

Philipp Zabel added:
The datasheet specifies 960 active clocks + 40/128/160 clocks blanking
on each of the two LVDS channels (min/typical/max), so doubled this is
now correct.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1562764060.23869.12.camel@pengutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/panel/panel-simple.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 5fd94e2060297..654fea2b43124 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -689,9 +689,9 @@ static const struct panel_desc auo_g133han01 = {
 static const struct display_timing auo_g185han01_timings = {
 	.pixelclock = { 120000000, 144000000, 175000000 },
 	.hactive = { 1920, 1920, 1920 },
-	.hfront_porch = { 18, 60, 74 },
-	.hback_porch = { 12, 44, 54 },
-	.hsync_len = { 10, 24, 32 },
+	.hfront_porch = { 36, 120, 148 },
+	.hback_porch = { 24, 88, 108 },
+	.hsync_len = { 20, 48, 64 },
 	.vactive = { 1080, 1080, 1080 },
 	.vfront_porch = { 6, 10, 40 },
 	.vback_porch = { 2, 5, 20 },
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.19 05/50] video: ssd1307fb: Start page range at page_offset

[Sasha Levin]

From: Marko Kohtala <marko.kohtala@okoko.fi>

[ Upstream commit dd9782834dd9dde3624ff1acea8859f3d3e792d4 ]

The page_offset was only applied to the end of the page range. This caused
the display updates to cause a scrolling effect on the display because the
amount of data written to the display did not match the range display
expected.

Fixes: 301bc0675b67 ("video: ssd1307fb: Make use of horizontal addressing mode")
Signed-off-by: Marko Kohtala <marko.kohtala@okoko.fi>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618074111.9309-4-marko.kohtala@okoko.fi
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/ssd1307fb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c
index 6439231f2db22..da565f39c9b06 100644
--- a/drivers/video/fbdev/ssd1307fb.c
+++ b/drivers/video/fbdev/ssd1307fb.c
@@ -433,7 +433,7 @@ static int ssd1307fb_init(struct ssd1307fb_par *par)
 	if (ret < 0)
 		return ret;
 
-	ret = ssd1307fb_write_cmd(par->client, 0x0);
+	ret = ssd1307fb_write_cmd(par->client, par->page_offset);
 	if (ret < 0)
 		return ret;
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 05/50] video: ssd1307fb: Start page range at page_offset

[Sasha Levin]

From: Marko Kohtala <marko.kohtala@okoko.fi>

[ Upstream commit dd9782834dd9dde3624ff1acea8859f3d3e792d4 ]

The page_offset was only applied to the end of the page range. This caused
the display updates to cause a scrolling effect on the display because the
amount of data written to the display did not match the range display
expected.

Fixes: 301bc0675b67 ("video: ssd1307fb: Make use of horizontal addressing mode")
Signed-off-by: Marko Kohtala <marko.kohtala@okoko.fi>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618074111.9309-4-marko.kohtala@okoko.fi
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/ssd1307fb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c
index 6439231f2db22..da565f39c9b06 100644
--- a/drivers/video/fbdev/ssd1307fb.c
+++ b/drivers/video/fbdev/ssd1307fb.c
@@ -433,7 +433,7 @@ static int ssd1307fb_init(struct ssd1307fb_par *par)
 	if (ret < 0)
 		return ret;
 
-	ret = ssd1307fb_write_cmd(par->client, 0x0);
+	ret = ssd1307fb_write_cmd(par->client, par->page_offset);
 	if (ret < 0)
 		return ret;
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 05/50] video: ssd1307fb: Start page range at page_offset

[Sasha Levin]

From: Marko Kohtala <marko.kohtala@okoko.fi>

[ Upstream commit dd9782834dd9dde3624ff1acea8859f3d3e792d4 ]

The page_offset was only applied to the end of the page range. This caused
the display updates to cause a scrolling effect on the display because the
amount of data written to the display did not match the range display
expected.

Fixes: 301bc0675b67 ("video: ssd1307fb: Make use of horizontal addressing mode")
Signed-off-by: Marko Kohtala <marko.kohtala@okoko.fi>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618074111.9309-4-marko.kohtala@okoko.fi
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/ssd1307fb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c
index 6439231f2db22..da565f39c9b06 100644
--- a/drivers/video/fbdev/ssd1307fb.c
+++ b/drivers/video/fbdev/ssd1307fb.c
@@ -433,7 +433,7 @@ static int ssd1307fb_init(struct ssd1307fb_par *par)
 	if (ret < 0)
 		return ret;
 
-	ret = ssd1307fb_write_cmd(par->client, 0x0);
+	ret = ssd1307fb_write_cmd(par->client, par->page_offset);
 	if (ret < 0)
 		return ret;
 
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.19 06/50] drm/stm: attach gem fence to atomic state

[Sasha Levin]

From: Ahmad Fatoum <a.fatoum@pengutronix.de>

[ Upstream commit 8fabc9c3109a71b3577959a05408153ae69ccd8d ]

To properly synchronize with other devices the fence from the GEM
object backing the framebuffer needs to be attached to the atomic
state, so the commit work can wait on fence signaling.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712084228.8338-1-l.stach@pengutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/stm/ltdc.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
index 808d9fb627e97..477d0a27b9a5d 100644
--- a/drivers/gpu/drm/stm/ltdc.c
+++ b/drivers/gpu/drm/stm/ltdc.c
@@ -19,6 +19,7 @@
 #include <drm/drm_crtc_helper.h>
 #include <drm/drm_fb_cma_helper.h>
 #include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_gem_framebuffer_helper.h>
 #include <drm/drm_of.h>
 #include <drm/drm_bridge.h>
 #include <drm/drm_plane_helper.h>
@@ -825,6 +826,7 @@ static const struct drm_plane_funcs ltdc_plane_funcs = {
 };
 
 static const struct drm_plane_helper_funcs ltdc_plane_helper_funcs = {
+	.prepare_fb = drm_gem_fb_prepare_fb,
 	.atomic_check = ltdc_plane_atomic_check,
 	.atomic_update = ltdc_plane_atomic_update,
 	.atomic_disable = ltdc_plane_atomic_disable,
-- 
2.20.1

[PATCH AUTOSEL 4.19 06/50] drm/stm: attach gem fence to atomic state

[Sasha Levin]

From: Ahmad Fatoum <a.fatoum@pengutronix.de>

[ Upstream commit 8fabc9c3109a71b3577959a05408153ae69ccd8d ]

To properly synchronize with other devices the fence from the GEM
object backing the framebuffer needs to be attached to the atomic
state, so the commit work can wait on fence signaling.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712084228.8338-1-l.stach@pengutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/stm/ltdc.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
index 808d9fb627e97..477d0a27b9a5d 100644
--- a/drivers/gpu/drm/stm/ltdc.c
+++ b/drivers/gpu/drm/stm/ltdc.c
@@ -19,6 +19,7 @@
 #include <drm/drm_crtc_helper.h>
 #include <drm/drm_fb_cma_helper.h>
 #include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_gem_framebuffer_helper.h>
 #include <drm/drm_of.h>
 #include <drm/drm_bridge.h>
 #include <drm/drm_plane_helper.h>
@@ -825,6 +826,7 @@ static const struct drm_plane_funcs ltdc_plane_funcs = {
 };
 
 static const struct drm_plane_helper_funcs ltdc_plane_helper_funcs = {
+	.prepare_fb = drm_gem_fb_prepare_fb,
 	.atomic_check = ltdc_plane_atomic_check,
 	.atomic_update = ltdc_plane_atomic_update,
 	.atomic_disable = ltdc_plane_atomic_disable,
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.19 07/50] drm/panel: check failure cases in the probe func

[Sasha Levin]

From: Navid Emamdoost <navid.emamdoost@gmail.com>

[ Upstream commit afd6d4f5a52c16e1483328ac074abb1cde92c29f ]

The following function calls may fail and return NULL, so the null check
is added.
of_graph_get_next_endpoint
of_graph_get_remote_port_parent
of_graph_get_remote_port

Update: Thanks to Sam Ravnborg, for suggession on the use of goto to avoid
leaking endpoint.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190724195534.9303-1-navid.emamdoost@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/panel/panel-raspberrypi-touchscreen.c   | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
index 2c9c9722734f5..9a2cb8aeab3a4 100644
--- a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
+++ b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
@@ -400,7 +400,13 @@ static int rpi_touchscreen_probe(struct i2c_client *i2c,
 
 	/* Look up the DSI host.  It needs to probe before we do. */
 	endpoint = of_graph_get_next_endpoint(dev->of_node, NULL);
+	if (!endpoint)
+		return -ENODEV;
+
 	dsi_host_node = of_graph_get_remote_port_parent(endpoint);
+	if (!dsi_host_node)
+		goto error;
+
 	host = of_find_mipi_dsi_host_by_node(dsi_host_node);
 	of_node_put(dsi_host_node);
 	if (!host) {
@@ -409,6 +415,9 @@ static int rpi_touchscreen_probe(struct i2c_client *i2c,
 	}
 
 	info.node = of_graph_get_remote_port(endpoint);
+	if (!info.node)
+		goto error;
+
 	of_node_put(endpoint);
 
 	ts->dsi = mipi_dsi_device_register_full(host, &info);
@@ -429,6 +438,10 @@ static int rpi_touchscreen_probe(struct i2c_client *i2c,
 		return ret;
 
 	return 0;
+
+error:
+	of_node_put(endpoint);
+	return -ENODEV;
 }
 
 static int rpi_touchscreen_remove(struct i2c_client *i2c)
-- 
2.20.1

[PATCH AUTOSEL 4.19 08/50] drm/rockchip: Check for fast link training before enabling psr

[Sasha Levin]

From: Sean Paul <seanpaul@chromium.org>

[ Upstream commit ad309284a52be47c8b3126c9376358bf381861bc ]

Once we start shutting off the link during PSR, we're going to want fast
training to work. If the display doesn't support fast training, don't
enable psr.

Changes in v2:
- None
Changes in v3:
- None
Changes in v4:
- None
Changes in v5:
- None

Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-3-sean@poorly.run
Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-2-sean@poorly.run
Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-9-sean@poorly.run
Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-8-sean@poorly.run

Cc: Zain Wang <wzz@rock-chips.com>
Cc: Tomasz Figa <tfiga@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-8-sean@poorly.run
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index d68986cea1325..84abf5d6f760a 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -1040,16 +1040,17 @@ static int analogix_dp_commit(struct analogix_dp_device *dp)
 	if (ret)
 		return ret;
 
+	/* Check whether panel supports fast training */
+	ret = analogix_dp_fast_link_train_detection(dp);
+	if (ret)
+		dp->psr_enable = false;
+
 	if (dp->psr_enable) {
 		ret = analogix_dp_enable_sink_psr(dp);
 		if (ret)
 			return ret;
 	}
 
-	/* Check whether panel supports fast training */
-	ret =  analogix_dp_fast_link_train_detection(dp);
-	if (ret)
-		dp->psr_enable = false;
 
 	return ret;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.19 08/50] drm/rockchip: Check for fast link training before enabling psr

[Sasha Levin]

From: Sean Paul <seanpaul@chromium.org>

[ Upstream commit ad309284a52be47c8b3126c9376358bf381861bc ]

Once we start shutting off the link during PSR, we're going to want fast
training to work. If the display doesn't support fast training, don't
enable psr.

Changes in v2:
- None
Changes in v3:
- None
Changes in v4:
- None
Changes in v5:
- None

Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-3-sean@poorly.run
Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-2-sean@poorly.run
Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-9-sean@poorly.run
Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-8-sean@poorly.run

Cc: Zain Wang <wzz@rock-chips.com>
Cc: Tomasz Figa <tfiga@chromium.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-8-sean@poorly.run
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index d68986cea1325..84abf5d6f760a 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -1040,16 +1040,17 @@ static int analogix_dp_commit(struct analogix_dp_device *dp)
 	if (ret)
 		return ret;
 
+	/* Check whether panel supports fast training */
+	ret = analogix_dp_fast_link_train_detection(dp);
+	if (ret)
+		dp->psr_enable = false;
+
 	if (dp->psr_enable) {
 		ret = analogix_dp_enable_sink_psr(dp);
 		if (ret)
 			return ret;
 	}
 
-	/* Check whether panel supports fast training */
-	ret =  analogix_dp_fast_link_train_detection(dp);
-	if (ret)
-		dp->psr_enable = false;
 
 	return ret;
 }
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.19 09/50] drm/radeon: Fix EEH during kexec

[Sasha Levin]

From: KyleMahlkuch <kmahlkuc@linux.vnet.ibm.com>

[ Upstream commit 6f7fe9a93e6c09bf988c5059403f5f88e17e21e6 ]

During kexec some adapters hit an EEH since they are not properly
shut down in the radeon_pci_shutdown() function. Adding
radeon_suspend_kms() fixes this issue.

Signed-off-by: KyleMahlkuch <kmahlkuc@linux.vnet.ibm.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/radeon/radeon_drv.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index 2a7977a23b31c..25b5407c74b5a 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -364,11 +364,19 @@ radeon_pci_remove(struct pci_dev *pdev)
 static void
 radeon_pci_shutdown(struct pci_dev *pdev)
 {
+	struct drm_device *ddev = pci_get_drvdata(pdev);
+
 	/* if we are running in a VM, make sure the device
 	 * torn down properly on reboot/shutdown
 	 */
 	if (radeon_device_is_virtual())
 		radeon_pci_remove(pdev);
+
+	/* Some adapters need to be suspended before a
+	* shutdown occurs in order to prevent an error
+	* during kexec.
+	*/
+	radeon_suspend_kms(ddev, true, true, false);
 }
 
 static int radeon_pmops_suspend(struct device *dev)
-- 
2.20.1

[PATCH AUTOSEL 4.19 09/50] drm/radeon: Fix EEH during kexec

[Sasha Levin]

From: KyleMahlkuch <kmahlkuc@linux.vnet.ibm.com>

[ Upstream commit 6f7fe9a93e6c09bf988c5059403f5f88e17e21e6 ]

During kexec some adapters hit an EEH since they are not properly
shut down in the radeon_pci_shutdown() function. Adding
radeon_suspend_kms() fixes this issue.

Signed-off-by: KyleMahlkuch <kmahlkuc@linux.vnet.ibm.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/radeon/radeon_drv.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index 2a7977a23b31c..25b5407c74b5a 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -364,11 +364,19 @@ radeon_pci_remove(struct pci_dev *pdev)
 static void
 radeon_pci_shutdown(struct pci_dev *pdev)
 {
+	struct drm_device *ddev = pci_get_drvdata(pdev);
+
 	/* if we are running in a VM, make sure the device
 	 * torn down properly on reboot/shutdown
 	 */
 	if (radeon_device_is_virtual())
 		radeon_pci_remove(pdev);
+
+	/* Some adapters need to be suspended before a
+	* shutdown occurs in order to prevent an error
+	* during kexec.
+	*/
+	radeon_suspend_kms(ddev, true, true, false);
 }
 
 static int radeon_pmops_suspend(struct device *dev)
-- 
2.20.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 4.19 10/50] gpu: drm: radeon: Fix a possible null-pointer dereference in radeon_connector_set_property()

[Sasha Levin]

From: Jia-Ju Bai <baijiaju1990@gmail.com>

[ Upstream commit f3eb9b8f67bc28783eddc142ad805ebdc53d6339 ]

In radeon_connector_set_property(), there is an if statement on line 743
to check whether connector->encoder is NULL:
    if (connector->encoder)

When connector->encoder is NULL, it is used on line 755:
    if (connector->encoder->crtc)

Thus, a possible null-pointer dereference may occur.

To fix this bug, connector->encoder is checked before being used.

This bug is found by a static analysis tool STCheck written by us.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/radeon/radeon_connectors.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index 414642e5b7a31..de656f5553839 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -751,7 +751,7 @@ static int radeon_connector_set_property(struct drm_connector *connector, struct
 
 		radeon_encoder->output_csc = val;
 
-		if (connector->encoder->crtc) {
+		if (connector->encoder && connector->encoder->crtc) {
 			struct drm_crtc *crtc  = connector->encoder->crtc;
 			struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 10/50] gpu: drm: radeon: Fix a possible null-pointer dereference in radeon_connector_set_property()

[Sasha Levin]

From: Jia-Ju Bai <baijiaju1990@gmail.com>

[ Upstream commit f3eb9b8f67bc28783eddc142ad805ebdc53d6339 ]

In radeon_connector_set_property(), there is an if statement on line 743
to check whether connector->encoder is NULL:
    if (connector->encoder)

When connector->encoder is NULL, it is used on line 755:
    if (connector->encoder->crtc)

Thus, a possible null-pointer dereference may occur.

To fix this bug, connector->encoder is checked before being used.

This bug is found by a static analysis tool STCheck written by us.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/radeon/radeon_connectors.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index 414642e5b7a31..de656f5553839 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -751,7 +751,7 @@ static int radeon_connector_set_property(struct drm_connector *connector, struct
 
 		radeon_encoder->output_csc = val;
 
-		if (connector->encoder->crtc) {
+		if (connector->encoder && connector->encoder->crtc) {
 			struct drm_crtc *crtc  = connector->encoder->crtc;
 			struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
 
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.19 11/50] PCI: rpaphp: Avoid a sometimes-uninitialized warning

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 0df3e42167caaf9f8c7b64de3da40a459979afe8 ]

When building with -Wsometimes-uninitialized, clang warns:

drivers/pci/hotplug/rpaphp_core.c:243:14: warning: variable 'fndit' is
used uninitialized whenever 'for' loop exits because its condition is
false [-Wsometimes-uninitialized]
        for (j = 0; j < entries; j++) {
                    ^~~~~~~~~~~
drivers/pci/hotplug/rpaphp_core.c:256:6: note: uninitialized use occurs
here
        if (fndit)
            ^~~~~
drivers/pci/hotplug/rpaphp_core.c:243:14: note: remove the condition if
it is always true
        for (j = 0; j < entries; j++) {
                    ^~~~~~~~~~~
drivers/pci/hotplug/rpaphp_core.c:233:14: note: initialize the variable
'fndit' to silence this warning
        int j, fndit;
                    ^
                     = 0

fndit is only used to gate a sprintf call, which can be moved into the
loop to simplify the code and eliminate the local variable, which will
fix this warning.

Fixes: 2fcf3ae508c2 ("hotplug/drc-info: Add code to search ibm,drc-info property")
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Acked-by: Joel Savitz <jsavitz@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/504
Link: https://lore.kernel.org/r/20190603221157.58502-1-natechancellor@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/hotplug/rpaphp_core.c | 18 +++++++-----------
 1 file changed, 7 insertions(+), 11 deletions(-)

diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c
index 857c358b727b8..cc860c5f7d26f 100644
--- a/drivers/pci/hotplug/rpaphp_core.c
+++ b/drivers/pci/hotplug/rpaphp_core.c
@@ -230,7 +230,7 @@ static int rpaphp_check_drc_props_v2(struct device_node *dn, char *drc_name,
 	struct of_drc_info drc;
 	const __be32 *value;
 	char cell_drc_name[MAX_DRC_NAME_LEN];
-	int j, fndit;
+	int j;
 
 	info = of_find_property(dn->parent, "ibm,drc-info", NULL);
 	if (info == NULL)
@@ -245,17 +245,13 @@ static int rpaphp_check_drc_props_v2(struct device_node *dn, char *drc_name,
 
 		/* Should now know end of current entry */
 
-		if (my_index > drc.last_drc_index)
-			continue;
-
-		fndit = 1;
-		break;
+		/* Found it */
+		if (my_index <= drc.last_drc_index) {
+			sprintf(cell_drc_name, "%s%d", drc.drc_name_prefix,
+				my_index);
+			break;
+		}
 	}
-	/* Found it */
-
-	if (fndit)
-		sprintf(cell_drc_name, "%s%d", drc.drc_name_prefix, 
-			my_index);
 
 	if (((drc_name == NULL) ||
 	     (drc_name && !strcmp(drc_name, cell_drc_name))) &&
-- 
2.20.1

[PATCH AUTOSEL 4.19 11/50] PCI: rpaphp: Avoid a sometimes-uninitialized warning

[Sasha Levin]

From: Nathan Chancellor <natechancellor@gmail.com>

[ Upstream commit 0df3e42167caaf9f8c7b64de3da40a459979afe8 ]

When building with -Wsometimes-uninitialized, clang warns:

drivers/pci/hotplug/rpaphp_core.c:243:14: warning: variable 'fndit' is
used uninitialized whenever 'for' loop exits because its condition is
false [-Wsometimes-uninitialized]
        for (j = 0; j < entries; j++) {
                    ^~~~~~~~~~~
drivers/pci/hotplug/rpaphp_core.c:256:6: note: uninitialized use occurs
here
        if (fndit)
            ^~~~~
drivers/pci/hotplug/rpaphp_core.c:243:14: note: remove the condition if
it is always true
        for (j = 0; j < entries; j++) {
                    ^~~~~~~~~~~
drivers/pci/hotplug/rpaphp_core.c:233:14: note: initialize the variable
'fndit' to silence this warning
        int j, fndit;
                    ^
                     = 0

fndit is only used to gate a sprintf call, which can be moved into the
loop to simplify the code and eliminate the local variable, which will
fix this warning.

Fixes: 2fcf3ae508c2 ("hotplug/drc-info: Add code to search ibm,drc-info property")
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Acked-by: Joel Savitz <jsavitz@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/504
Link: https://lore.kernel.org/r/20190603221157.58502-1-natechancellor@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/hotplug/rpaphp_core.c | 18 +++++++-----------
 1 file changed, 7 insertions(+), 11 deletions(-)

diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c
index 857c358b727b8..cc860c5f7d26f 100644
--- a/drivers/pci/hotplug/rpaphp_core.c
+++ b/drivers/pci/hotplug/rpaphp_core.c
@@ -230,7 +230,7 @@ static int rpaphp_check_drc_props_v2(struct device_node *dn, char *drc_name,
 	struct of_drc_info drc;
 	const __be32 *value;
 	char cell_drc_name[MAX_DRC_NAME_LEN];
-	int j, fndit;
+	int j;
 
 	info = of_find_property(dn->parent, "ibm,drc-info", NULL);
 	if (info == NULL)
@@ -245,17 +245,13 @@ static int rpaphp_check_drc_props_v2(struct device_node *dn, char *drc_name,
 
 		/* Should now know end of current entry */
 
-		if (my_index > drc.last_drc_index)
-			continue;
-
-		fndit = 1;
-		break;
+		/* Found it */
+		if (my_index <= drc.last_drc_index) {
+			sprintf(cell_drc_name, "%s%d", drc.drc_name_prefix,
+				my_index);
+			break;
+		}
 	}
-	/* Found it */
-
-	if (fndit)
-		sprintf(cell_drc_name, "%s%d", drc.drc_name_prefix, 
-			my_index);
 
 	if (((drc_name == NULL) ||
 	     (drc_name && !strcmp(drc_name, cell_drc_name))) &&
-- 
2.20.1

[PATCH AUTOSEL 4.19 12/50] ipmi_si: Only schedule continuously in the thread in maintenance mode

[Sasha Levin]

From: Corey Minyard <cminyard@mvista.com>

[ Upstream commit 340ff31ab00bca5c15915e70ad9ada3030c98cf8 ]

ipmi_thread() uses back-to-back schedule() to poll for command
completion which, on some machines, can push up CPU consumption and
heavily tax the scheduler locks leading to noticeable overall
performance degradation.

This was originally added so firmware updates through IPMI would
complete in a timely manner.  But we can't kill the scheduler
locks for that one use case.

Instead, only run schedule() continuously in maintenance mode,
where firmware updates should run.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/ipmi/ipmi_si_intf.c | 24 +++++++++++++++++++-----
 1 file changed, 19 insertions(+), 5 deletions(-)

diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 75e5006f395a5..006d765256782 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -221,6 +221,9 @@ struct smi_info {
 	 */
 	bool irq_enable_broken;
 
+	/* Is the driver in maintenance mode? */
+	bool in_maintenance_mode;
+
 	/*
 	 * Did we get an attention that we did not handle?
 	 */
@@ -1013,11 +1016,20 @@ static int ipmi_thread(void *data)
 		spin_unlock_irqrestore(&(smi_info->si_lock), flags);
 		busy_wait = ipmi_thread_busy_wait(smi_result, smi_info,
 						  &busy_until);
-		if (smi_result == SI_SM_CALL_WITHOUT_DELAY)
+		if (smi_result == SI_SM_CALL_WITHOUT_DELAY) {
 			; /* do nothing */
-		else if (smi_result == SI_SM_CALL_WITH_DELAY && busy_wait)
-			schedule();
-		else if (smi_result == SI_SM_IDLE) {
+		} else if (smi_result == SI_SM_CALL_WITH_DELAY && busy_wait) {
+			/*
+			 * In maintenance mode we run as fast as
+			 * possible to allow firmware updates to
+			 * complete as fast as possible, but normally
+			 * don't bang on the scheduler.
+			 */
+			if (smi_info->in_maintenance_mode)
+				schedule();
+			else
+				usleep_range(100, 200);
+		} else if (smi_result == SI_SM_IDLE) {
 			if (atomic_read(&smi_info->need_watch)) {
 				schedule_timeout_interruptible(100);
 			} else {
@@ -1025,8 +1037,9 @@ static int ipmi_thread(void *data)
 				__set_current_state(TASK_INTERRUPTIBLE);
 				schedule();
 			}
-		} else
+		} else {
 			schedule_timeout_interruptible(1);
+		}
 	}
 	return 0;
 }
@@ -1201,6 +1214,7 @@ static void set_maintenance_mode(void *send_info, bool enable)
 
 	if (!enable)
 		atomic_set(&smi_info->req_events, 0);
+	smi_info->in_maintenance_mode = enable;
 }
 
 static void shutdown_smi(void *send_info);
-- 
2.20.1

[PATCH AUTOSEL 4.19 13/50] clk: qoriq: Fix -Wunused-const-variable

[Sasha Levin]

From: Nathan Huckleberry <nhuck@google.com>

[ Upstream commit a95fb581b144b5e73da382eaedb2e32027610597 ]

drivers/clk/clk-qoriq.c:138:38: warning: unused variable
'p5020_cmux_grp1' [-Wunused-const-variable] static const struct
clockgen_muxinfo p5020_cmux_grp1

drivers/clk/clk-qoriq.c:146:38: warning: unused variable
'p5020_cmux_grp2' [-Wunused-const-variable] static const struct
clockgen_muxinfo p5020_cmux_grp2

In the definition of the p5020 chip, the p2041 chip's info was used
instead.  The p5020 and p2041 chips have different info. This is most
likely a typo.

Link: https://github.com/ClangBuiltLinux/linux/issues/525
Cc: clang-built-linux@googlegroups.com
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Link: https://lkml.kernel.org/r/20190627220642.78575-1-nhuck@google.com
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/clk-qoriq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c
index 3a1812f65e5d8..8abc5c8cb8b8c 100644
--- a/drivers/clk/clk-qoriq.c
+++ b/drivers/clk/clk-qoriq.c
@@ -610,7 +610,7 @@ static const struct clockgen_chipinfo chipinfo[] = {
 		.guts_compat = "fsl,qoriq-device-config-1.0",
 		.init_periph = p5020_init_periph,
 		.cmux_groups = {
-			&p2041_cmux_grp1, &p2041_cmux_grp2
+			&p5020_cmux_grp1, &p5020_cmux_grp2
 		},
 		.cmux_to_group = {
 			0, 1, -1
-- 
2.20.1

[PATCH AUTOSEL 4.19 14/50] clk: sunxi-ng: v3s: add missing clock slices for MMC2 module clocks

[Sasha Levin]

From: Icenowy Zheng <icenowy@aosc.io>

[ Upstream commit 720099603d1f62e37b789366d7e89824b009ca28 ]

The MMC2 clock slices are currently not defined in V3s CCU driver, which
makes MMC2 not working.

Fix this issue.

Fixes: d0f11d14b0bc ("clk: sunxi-ng: add support for V3s CCU")
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/sunxi-ng/ccu-sun8i-v3s.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
index ac12f261f8caa..9e3f4088724b4 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-v3s.c
@@ -499,6 +499,9 @@ static struct clk_hw_onecell_data sun8i_v3s_hw_clks = {
 		[CLK_MMC1]		= &mmc1_clk.common.hw,
 		[CLK_MMC1_SAMPLE]	= &mmc1_sample_clk.common.hw,
 		[CLK_MMC1_OUTPUT]	= &mmc1_output_clk.common.hw,
+		[CLK_MMC2]		= &mmc2_clk.common.hw,
+		[CLK_MMC2_SAMPLE]	= &mmc2_sample_clk.common.hw,
+		[CLK_MMC2_OUTPUT]	= &mmc2_output_clk.common.hw,
 		[CLK_CE]		= &ce_clk.common.hw,
 		[CLK_SPI0]		= &spi0_clk.common.hw,
 		[CLK_USB_PHY0]		= &usb_phy0_clk.common.hw,
-- 
2.20.1

[PATCH AUTOSEL 4.19 15/50] drm/amd/display: fix issue where 252-255 values are clipped

[Sasha Levin]

From: Anthony Koo <Anthony.Koo@amd.com>

[ Upstream commit 1cbcfc975164f397b449efb17f59d81a703090db ]

[Why]
When endpoint is at the boundary of a region, such as at 2^0=1
we find that the last segment has a sharp slope and some points
are clipped at the top.

[How]
If end point is 1, which is exactly at the 2^0 region boundary, we
need to program an additional region beyond this point.

Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn10/dcn10_cm_common.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_cm_common.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_cm_common.c
index 5d95a997fd9f9..f8904f73f57b0 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_cm_common.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_cm_common.c
@@ -292,9 +292,10 @@ bool cm_helper_translate_curve_to_hw_format(
 		seg_distr[7] = 4;
 		seg_distr[8] = 4;
 		seg_distr[9] = 4;
+		seg_distr[10] = 1;
 
 		region_start = -10;
-		region_end = 0;
+		region_end = 1;
 	}
 
 	for (i = region_end - region_start; i < MAX_REGIONS_NUMBER ; i++)
-- 
2.20.1

[PATCH AUTOSEL 4.19 16/50] drm/amd/display: reprogram VM config when system resume

[Sasha Levin]

From: Lewis Huang <Lewis.Huang@amd.com>

[ Upstream commit e5382701c3520b3ed66169a6e4aa6ce5df8c56e0 ]

[Why]
The vm config will be clear to 0 when system enter S4. It will
cause hubbub didn't know how to fetch data when system resume.
The flip always pending because earliest_inuse_address and
request_address are different.

[How]
Reprogram VM config when system resume

Signed-off-by: Lewis Huang <Lewis.Huang@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index f4b89d1ea6f6f..2b2efe443c36d 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -1585,6 +1585,14 @@ void dc_set_power_state(
 		dc_resource_state_construct(dc, dc->current_state);
 
 		dc->hwss.init_hw(dc);
+
+#ifdef CONFIG_DRM_AMD_DC_DCN2_0
+		if (dc->hwss.init_sys_ctx != NULL &&
+			dc->vm_pa_config.valid) {
+			dc->hwss.init_sys_ctx(dc->hwseq, dc, &dc->vm_pa_config);
+		}
+#endif
+
 		break;
 	default:
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 16/50] drm/amd/display: reprogram VM config when system resume

[Sasha Levin]

From: Lewis Huang <Lewis.Huang@amd.com>

[ Upstream commit e5382701c3520b3ed66169a6e4aa6ce5df8c56e0 ]

[Why]
The vm config will be clear to 0 when system enter S4. It will
cause hubbub didn't know how to fetch data when system resume.
The flip always pending because earliest_inuse_address and
request_address are different.

[How]
Reprogram VM config when system resume

Signed-off-by: Lewis Huang <Lewis.Huang@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Eric Yang <eric.yang2@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index f4b89d1ea6f6f..2b2efe443c36d 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -1585,6 +1585,14 @@ void dc_set_power_state(
 		dc_resource_state_construct(dc, dc->current_state);
 
 		dc->hwss.init_hw(dc);
+
+#ifdef CONFIG_DRM_AMD_DC_DCN2_0
+		if (dc->hwss.init_sys_ctx != NULL &&
+			dc->vm_pa_config.valid) {
+			dc->hwss.init_sys_ctx(dc->hwseq, dc, &dc->vm_pa_config);
+		}
+#endif
+
 		break;
 	default:
 
-- 
2.20.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 4.19 17/50] powerpc/powernv/ioda2: Allocate TCE table levels on demand for default DMA window

[Sasha Levin]

From: Alexey Kardashevskiy <aik@ozlabs.ru>

[ Upstream commit c37c792dec0929dbb6360a609fb00fa20bb16fc2 ]

We allocate only the first level of multilevel TCE tables for KVM
already (alloc_userspace_copy==true), and the rest is allocated on demand.
This is not enabled though for bare metal.

This removes the KVM limitation (implicit, via the alloc_userspace_copy
parameter) and always allocates just the first level. The on-demand
allocation of missing levels is already implemented.

As from now on DMA map might happen with disabled interrupts, this
allocates TCEs with GFP_ATOMIC; otherwise lockdep reports errors 1].
In practice just a single page is allocated there so chances for failure
are quite low.

To save time when creating a new clean table, this skips non-allocated
indirect TCE entries in pnv_tce_free just like we already do in
the VFIO IOMMU TCE driver.

This changes the default level number from 1 to 2 to reduce the amount
of memory required for the default 32bit DMA window at the boot time.
The default window size is up to 2GB which requires 4MB of TCEs which is
unlikely to be used entirely or at all as most devices these days are
64bit capable so by switching to 2 levels by default we save 4032KB of
RAM per a device.

While at this, add __GFP_NOWARN to alloc_pages_node() as the userspace
can trigger this path via VFIO, see the failure and try creating a table
again with different parameters which might succeed.

[1]:
===
BUG: sleeping function called from invalid context at mm/page_alloc.c:4596
in_atomic(): 1, irqs_disabled(): 1, pid: 1038, name: scsi_eh_1
2 locks held by scsi_eh_1/1038:
 #0: 000000005efd659a (&host->eh_mutex){+.+.}, at: ata_eh_acquire+0x34/0x80
 #1: 0000000006cf56a6 (&(&host->lock)->rlock){....}, at: ata_exec_internal_sg+0xb0/0x5c0
irq event stamp: 500
hardirqs last  enabled at (499): [<c000000000cb8a74>] _raw_spin_unlock_irqrestore+0x94/0xd0
hardirqs last disabled at (500): [<c000000000cb85c4>] _raw_spin_lock_irqsave+0x44/0x120
softirqs last  enabled at (0): [<c000000000101120>] copy_process.isra.4.part.5+0x640/0x1a80
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 73 PID: 1038 Comm: scsi_eh_1 Not tainted 5.2.0-rc6-le_nv2_aikATfstn1-p1 #634
Call Trace:
[c000003d064cef50] [c000000000c8e6c4] dump_stack+0xe8/0x164 (unreliable)
[c000003d064cefa0] [c00000000014ed78] ___might_sleep+0x2f8/0x310
[c000003d064cf020] [c0000000003ca084] __alloc_pages_nodemask+0x2a4/0x1560
[c000003d064cf220] [c0000000000c2530] pnv_alloc_tce_level.isra.0+0x90/0x130
[c000003d064cf290] [c0000000000c2888] pnv_tce+0x128/0x3b0
[c000003d064cf360] [c0000000000c2c00] pnv_tce_build+0xb0/0xf0
[c000003d064cf3c0] [c0000000000bbd9c] pnv_ioda2_tce_build+0x3c/0xb0
[c000003d064cf400] [c00000000004cfe0] ppc_iommu_map_sg+0x210/0x550
[c000003d064cf510] [c00000000004b7a4] dma_iommu_map_sg+0x74/0xb0
[c000003d064cf530] [c000000000863944] ata_qc_issue+0x134/0x470
[c000003d064cf5b0] [c000000000863ec4] ata_exec_internal_sg+0x244/0x5c0
[c000003d064cf700] [c0000000008642d0] ata_exec_internal+0x90/0xe0
[c000003d064cf780] [c0000000008650ac] ata_dev_read_id+0x2ec/0x640
[c000003d064cf8d0] [c000000000878e28] ata_eh_recover+0x948/0x16d0
[c000003d064cfa10] [c00000000087d760] sata_pmp_error_handler+0x480/0xbf0
[c000003d064cfbc0] [c000000000884624] ahci_error_handler+0x74/0xe0
[c000003d064cfbf0] [c000000000879fa8] ata_scsi_port_error_handler+0x2d8/0x7c0
[c000003d064cfca0] [c00000000087a544] ata_scsi_error+0xb4/0x100
[c000003d064cfd00] [c000000000802450] scsi_error_handler+0x120/0x510
[c000003d064cfdb0] [c000000000140c48] kthread+0x1b8/0x1c0
[c000003d064cfe20] [c00000000000bd8c] ret_from_kernel_thread+0x5c/0x70
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
irq event stamp: 2305

========================================================
hardirqs last  enabled at (2305): [<c00000000000e4c8>] fast_exc_return_irq+0x28/0x34
hardirqs last disabled at (2303): [<c000000000cb9fd0>] __do_softirq+0x4a0/0x654
WARNING: possible irq lock inversion dependency detected
5.2.0-rc6-le_nv2_aikATfstn1-p1 #634 Tainted: G        W
softirqs last  enabled at (2304): [<c000000000cba054>] __do_softirq+0x524/0x654
softirqs last disabled at (2297): [<c00000000010f278>] irq_exit+0x128/0x180
--------------------------------------------------------
swapper/0/0 just changed the state of lock:
0000000006cf56a6 (&(&host->lock)->rlock){-...}, at: ahci_single_level_irq_intr+0xac/0x120
but this lock took another, HARDIRQ-unsafe lock in the past:
 (fs_reclaim){+.+.}

and interrupts could create inverse lock ordering between them.

other info that might help us debug this:
 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(fs_reclaim);
                               local_irq_disable();
                               lock(&(&host->lock)->rlock);
                               lock(fs_reclaim);
  <Interrupt>
    lock(&(&host->lock)->rlock);

 *** DEADLOCK ***

no locks held by swapper/0/0.

the shortest dependencies between 2nd lock and 1st lock:
 -> (fs_reclaim){+.+.} ops: 167579 {
    HARDIRQ-ON-W at:
                      lock_acquire+0xf8/0x2a0
                      fs_reclaim_acquire.part.23+0x44/0x60
                      kmem_cache_alloc_node_trace+0x80/0x590
                      alloc_desc+0x64/0x270
                      __irq_alloc_descs+0x2e4/0x3a0
                      irq_domain_alloc_descs+0xb0/0x150
                      irq_create_mapping+0x168/0x2c0
                      xics_smp_probe+0x2c/0x98
                      pnv_smp_probe+0x40/0x9c
                      smp_prepare_cpus+0x524/0x6c4
                      kernel_init_freeable+0x1b4/0x650
                      kernel_init+0x2c/0x148
                      ret_from_kernel_thread+0x5c/0x70
    SOFTIRQ-ON-W at:
                      lock_acquire+0xf8/0x2a0
                      fs_reclaim_acquire.part.23+0x44/0x60
                      kmem_cache_alloc_node_trace+0x80/0x590
                      alloc_desc+0x64/0x270
                      __irq_alloc_descs+0x2e4/0x3a0
                      irq_domain_alloc_descs+0xb0/0x150
                      irq_create_mapping+0x168/0x2c0
                      xics_smp_probe+0x2c/0x98
                      pnv_smp_probe+0x40/0x9c
                      smp_prepare_cpus+0x524/0x6c4
                      kernel_init_freeable+0x1b4/0x650
                      kernel_init+0x2c/0x148
                      ret_from_kernel_thread+0x5c/0x70
    INITIAL USE at:
                     lock_acquire+0xf8/0x2a0
                     fs_reclaim_acquire.part.23+0x44/0x60
                     kmem_cache_alloc_node_trace+0x80/0x590
                     alloc_desc+0x64/0x270
                     __irq_alloc_descs+0x2e4/0x3a0
                     irq_domain_alloc_descs+0xb0/0x150
                     irq_create_mapping+0x168/0x2c0
                     xics_smp_probe+0x2c/0x98
                     pnv_smp_probe+0x40/0x9c
                     smp_prepare_cpus+0x524/0x6c4
                     kernel_init_freeable+0x1b4/0x650
                     kernel_init+0x2c/0x148
                     ret_from_kernel_thread+0x5c/0x70
  }
===

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190718051139.74787-4-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/powernv/pci-ioda-tce.c | 20 +++++++++----------
 arch/powerpc/platforms/powernv/pci.h          |  2 +-
 2 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/pci-ioda-tce.c b/arch/powerpc/platforms/powernv/pci-ioda-tce.c
index f5adb6b756f75..29e66d6e57636 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda-tce.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda-tce.c
@@ -36,7 +36,8 @@ static __be64 *pnv_alloc_tce_level(int nid, unsigned int shift)
 	struct page *tce_mem = NULL;
 	__be64 *addr;
 
-	tce_mem = alloc_pages_node(nid, GFP_KERNEL, shift - PAGE_SHIFT);
+	tce_mem = alloc_pages_node(nid, GFP_ATOMIC | __GFP_NOWARN,
+			shift - PAGE_SHIFT);
 	if (!tce_mem) {
 		pr_err("Failed to allocate a TCE memory, level shift=%d\n",
 				shift);
@@ -161,6 +162,9 @@ void pnv_tce_free(struct iommu_table *tbl, long index, long npages)
 
 		if (ptce)
 			*ptce = cpu_to_be64(0);
+		else
+			/* Skip the rest of the level */
+			i |= tbl->it_level_size - 1;
 	}
 }
 
@@ -260,7 +264,6 @@ long pnv_pci_ioda2_table_alloc_pages(int nid, __u64 bus_offset,
 	unsigned int table_shift = max_t(unsigned int, entries_shift + 3,
 			PAGE_SHIFT);
 	const unsigned long tce_table_size = 1UL << table_shift;
-	unsigned int tmplevels = levels;
 
 	if (!levels || (levels > POWERNV_IOMMU_MAX_LEVELS))
 		return -EINVAL;
@@ -268,9 +271,6 @@ long pnv_pci_ioda2_table_alloc_pages(int nid, __u64 bus_offset,
 	if (!is_power_of_2(window_size))
 		return -EINVAL;
 
-	if (alloc_userspace_copy && (window_size > (1ULL << 32)))
-		tmplevels = 1;
-
 	/* Adjust direct table size from window_size and levels */
 	entries_shift = (entries_shift + levels - 1) / levels;
 	level_shift = entries_shift + 3;
@@ -281,7 +281,7 @@ long pnv_pci_ioda2_table_alloc_pages(int nid, __u64 bus_offset,
 
 	/* Allocate TCE table */
 	addr = pnv_pci_ioda2_table_do_alloc_pages(nid, level_shift,
-			tmplevels, tce_table_size, &offset, &total_allocated);
+			1, tce_table_size, &offset, &total_allocated);
 
 	/* addr==NULL means that the first level allocation failed */
 	if (!addr)
@@ -292,18 +292,18 @@ long pnv_pci_ioda2_table_alloc_pages(int nid, __u64 bus_offset,
 	 * we did not allocate as much as we wanted,
 	 * release partially allocated table.
 	 */
-	if (tmplevels == levels && offset < tce_table_size)
+	if (levels == 1 && offset < tce_table_size)
 		goto free_tces_exit;
 
 	/* Allocate userspace view of the TCE table */
 	if (alloc_userspace_copy) {
 		offset = 0;
 		uas = pnv_pci_ioda2_table_do_alloc_pages(nid, level_shift,
-				tmplevels, tce_table_size, &offset,
+				1, tce_table_size, &offset,
 				&total_allocated_uas);
 		if (!uas)
 			goto free_tces_exit;
-		if (tmplevels == levels && (offset < tce_table_size ||
+		if (levels == 1 && (offset < tce_table_size ||
 				total_allocated_uas != total_allocated))
 			goto free_uas_exit;
 	}
@@ -318,7 +318,7 @@ long pnv_pci_ioda2_table_alloc_pages(int nid, __u64 bus_offset,
 
 	pr_debug("Created TCE table: ws=%08llx ts=%lx @%08llx base=%lx uas=%p levels=%d/%d\n",
 			window_size, tce_table_size, bus_offset, tbl->it_base,
-			tbl->it_userspace, tmplevels, levels);
+			tbl->it_userspace, 1, levels);
 
 	return 0;
 
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index 8b37b28e38318..e302aa092d4f1 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -243,7 +243,7 @@ extern void pnv_npu_release_ownership(struct pnv_ioda_pe *npe);
 extern int pnv_npu2_init(struct pnv_phb *phb);
 
 /* pci-ioda-tce.c */
-#define POWERNV_IOMMU_DEFAULT_LEVELS	1
+#define POWERNV_IOMMU_DEFAULT_LEVELS	2
 #define POWERNV_IOMMU_MAX_LEVELS	5
 
 extern int pnv_tce_build(struct iommu_table *tbl, long index, long npages,
-- 
2.20.1

[PATCH AUTOSEL 4.19 17/50] powerpc/powernv/ioda2: Allocate TCE table levels on demand for default DMA window

[Sasha Levin]

From: Alexey Kardashevskiy <aik@ozlabs.ru>

[ Upstream commit c37c792dec0929dbb6360a609fb00fa20bb16fc2 ]

We allocate only the first level of multilevel TCE tables for KVM
already (alloc_userspace_copy==true), and the rest is allocated on demand.
This is not enabled though for bare metal.

This removes the KVM limitation (implicit, via the alloc_userspace_copy
parameter) and always allocates just the first level. The on-demand
allocation of missing levels is already implemented.

As from now on DMA map might happen with disabled interrupts, this
allocates TCEs with GFP_ATOMIC; otherwise lockdep reports errors 1].
In practice just a single page is allocated there so chances for failure
are quite low.

To save time when creating a new clean table, this skips non-allocated
indirect TCE entries in pnv_tce_free just like we already do in
the VFIO IOMMU TCE driver.

This changes the default level number from 1 to 2 to reduce the amount
of memory required for the default 32bit DMA window at the boot time.
The default window size is up to 2GB which requires 4MB of TCEs which is
unlikely to be used entirely or at all as most devices these days are
64bit capable so by switching to 2 levels by default we save 4032KB of
RAM per a device.

While at this, add __GFP_NOWARN to alloc_pages_node() as the userspace
can trigger this path via VFIO, see the failure and try creating a table
again with different parameters which might succeed.

[1]:
===
BUG: sleeping function called from invalid context at mm/page_alloc.c:4596
in_atomic(): 1, irqs_disabled(): 1, pid: 1038, name: scsi_eh_1
2 locks held by scsi_eh_1/1038:
 #0: 000000005efd659a (&host->eh_mutex){+.+.}, at: ata_eh_acquire+0x34/0x80
 #1: 0000000006cf56a6 (&(&host->lock)->rlock){....}, at: ata_exec_internal_sg+0xb0/0x5c0
irq event stamp: 500
hardirqs last  enabled at (499): [<c000000000cb8a74>] _raw_spin_unlock_irqrestore+0x94/0xd0
hardirqs last disabled at (500): [<c000000000cb85c4>] _raw_spin_lock_irqsave+0x44/0x120
softirqs last  enabled at (0): [<c000000000101120>] copy_process.isra.4.part.5+0x640/0x1a80
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 73 PID: 1038 Comm: scsi_eh_1 Not tainted 5.2.0-rc6-le_nv2_aikATfstn1-p1 #634
Call Trace:
[c000003d064cef50] [c000000000c8e6c4] dump_stack+0xe8/0x164 (unreliable)
[c000003d064cefa0] [c00000000014ed78] ___might_sleep+0x2f8/0x310
[c000003d064cf020] [c0000000003ca084] __alloc_pages_nodemask+0x2a4/0x1560
[c000003d064cf220] [c0000000000c2530] pnv_alloc_tce_level.isra.0+0x90/0x130
[c000003d064cf290] [c0000000000c2888] pnv_tce+0x128/0x3b0
[c000003d064cf360] [c0000000000c2c00] pnv_tce_build+0xb0/0xf0
[c000003d064cf3c0] [c0000000000bbd9c] pnv_ioda2_tce_build+0x3c/0xb0
[c000003d064cf400] [c00000000004cfe0] ppc_iommu_map_sg+0x210/0x550
[c000003d064cf510] [c00000000004b7a4] dma_iommu_map_sg+0x74/0xb0
[c000003d064cf530] [c000000000863944] ata_qc_issue+0x134/0x470
[c000003d064cf5b0] [c000000000863ec4] ata_exec_internal_sg+0x244/0x5c0
[c000003d064cf700] [c0000000008642d0] ata_exec_internal+0x90/0xe0
[c000003d064cf780] [c0000000008650ac] ata_dev_read_id+0x2ec/0x640
[c000003d064cf8d0] [c000000000878e28] ata_eh_recover+0x948/0x16d0
[c000003d064cfa10] [c00000000087d760] sata_pmp_error_handler+0x480/0xbf0
[c000003d064cfbc0] [c000000000884624] ahci_error_handler+0x74/0xe0
[c000003d064cfbf0] [c000000000879fa8] ata_scsi_port_error_handler+0x2d8/0x7c0
[c000003d064cfca0] [c00000000087a544] ata_scsi_error+0xb4/0x100
[c000003d064cfd00] [c000000000802450] scsi_error_handler+0x120/0x510
[c000003d064cfdb0] [c000000000140c48] kthread+0x1b8/0x1c0
[c000003d064cfe20] [c00000000000bd8c] ret_from_kernel_thread+0x5c/0x70
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
irq event stamp: 2305

========================================================
hardirqs last  enabled at (2305): [<c00000000000e4c8>] fast_exc_return_irq+0x28/0x34
hardirqs last disabled at (2303): [<c000000000cb9fd0>] __do_softirq+0x4a0/0x654
WARNING: possible irq lock inversion dependency detected
5.2.0-rc6-le_nv2_aikATfstn1-p1 #634 Tainted: G        W
softirqs last  enabled at (2304): [<c000000000cba054>] __do_softirq+0x524/0x654
softirqs last disabled at (2297): [<c00000000010f278>] irq_exit+0x128/0x180
--------------------------------------------------------
swapper/0/0 just changed the state of lock:
0000000006cf56a6 (&(&host->lock)->rlock){-...}, at: ahci_single_level_irq_intr+0xac/0x120
but this lock took another, HARDIRQ-unsafe lock in the past:
 (fs_reclaim){+.+.}

and interrupts could create inverse lock ordering between them.

other info that might help us debug this:
 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(fs_reclaim);
                               local_irq_disable();
                               lock(&(&host->lock)->rlock);
                               lock(fs_reclaim);
  <Interrupt>
    lock(&(&host->lock)->rlock);

 *** DEADLOCK ***

no locks held by swapper/0/0.

the shortest dependencies between 2nd lock and 1st lock:
 -> (fs_reclaim){+.+.} ops: 167579 {
    HARDIRQ-ON-W at:
                      lock_acquire+0xf8/0x2a0
                      fs_reclaim_acquire.part.23+0x44/0x60
                      kmem_cache_alloc_node_trace+0x80/0x590
                      alloc_desc+0x64/0x270
                      __irq_alloc_descs+0x2e4/0x3a0
                      irq_domain_alloc_descs+0xb0/0x150
                      irq_create_mapping+0x168/0x2c0
                      xics_smp_probe+0x2c/0x98
                      pnv_smp_probe+0x40/0x9c
                      smp_prepare_cpus+0x524/0x6c4
                      kernel_init_freeable+0x1b4/0x650
                      kernel_init+0x2c/0x148
                      ret_from_kernel_thread+0x5c/0x70
    SOFTIRQ-ON-W at:
                      lock_acquire+0xf8/0x2a0
                      fs_reclaim_acquire.part.23+0x44/0x60
                      kmem_cache_alloc_node_trace+0x80/0x590
                      alloc_desc+0x64/0x270
                      __irq_alloc_descs+0x2e4/0x3a0
                      irq_domain_alloc_descs+0xb0/0x150
                      irq_create_mapping+0x168/0x2c0
                      xics_smp_probe+0x2c/0x98
                      pnv_smp_probe+0x40/0x9c
                      smp_prepare_cpus+0x524/0x6c4
                      kernel_init_freeable+0x1b4/0x650
                      kernel_init+0x2c/0x148
                      ret_from_kernel_thread+0x5c/0x70
    INITIAL USE at:
                     lock_acquire+0xf8/0x2a0
                     fs_reclaim_acquire.part.23+0x44/0x60
                     kmem_cache_alloc_node_trace+0x80/0x590
                     alloc_desc+0x64/0x270
                     __irq_alloc_descs+0x2e4/0x3a0
                     irq_domain_alloc_descs+0xb0/0x150
                     irq_create_mapping+0x168/0x2c0
                     xics_smp_probe+0x2c/0x98
                     pnv_smp_probe+0x40/0x9c
                     smp_prepare_cpus+0x524/0x6c4
                     kernel_init_freeable+0x1b4/0x650
                     kernel_init+0x2c/0x148
                     ret_from_kernel_thread+0x5c/0x70
  }
===

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190718051139.74787-4-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/powernv/pci-ioda-tce.c | 20 +++++++++----------
 arch/powerpc/platforms/powernv/pci.h          |  2 +-
 2 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/pci-ioda-tce.c b/arch/powerpc/platforms/powernv/pci-ioda-tce.c
index f5adb6b756f75..29e66d6e57636 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda-tce.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda-tce.c
@@ -36,7 +36,8 @@ static __be64 *pnv_alloc_tce_level(int nid, unsigned int shift)
 	struct page *tce_mem = NULL;
 	__be64 *addr;
 
-	tce_mem = alloc_pages_node(nid, GFP_KERNEL, shift - PAGE_SHIFT);
+	tce_mem = alloc_pages_node(nid, GFP_ATOMIC | __GFP_NOWARN,
+			shift - PAGE_SHIFT);
 	if (!tce_mem) {
 		pr_err("Failed to allocate a TCE memory, level shift=%d\n",
 				shift);
@@ -161,6 +162,9 @@ void pnv_tce_free(struct iommu_table *tbl, long index, long npages)
 
 		if (ptce)
 			*ptce = cpu_to_be64(0);
+		else
+			/* Skip the rest of the level */
+			i |= tbl->it_level_size - 1;
 	}
 }
 
@@ -260,7 +264,6 @@ long pnv_pci_ioda2_table_alloc_pages(int nid, __u64 bus_offset,
 	unsigned int table_shift = max_t(unsigned int, entries_shift + 3,
 			PAGE_SHIFT);
 	const unsigned long tce_table_size = 1UL << table_shift;
-	unsigned int tmplevels = levels;
 
 	if (!levels || (levels > POWERNV_IOMMU_MAX_LEVELS))
 		return -EINVAL;
@@ -268,9 +271,6 @@ long pnv_pci_ioda2_table_alloc_pages(int nid, __u64 bus_offset,
 	if (!is_power_of_2(window_size))
 		return -EINVAL;
 
-	if (alloc_userspace_copy && (window_size > (1ULL << 32)))
-		tmplevels = 1;
-
 	/* Adjust direct table size from window_size and levels */
 	entries_shift = (entries_shift + levels - 1) / levels;
 	level_shift = entries_shift + 3;
@@ -281,7 +281,7 @@ long pnv_pci_ioda2_table_alloc_pages(int nid, __u64 bus_offset,
 
 	/* Allocate TCE table */
 	addr = pnv_pci_ioda2_table_do_alloc_pages(nid, level_shift,
-			tmplevels, tce_table_size, &offset, &total_allocated);
+			1, tce_table_size, &offset, &total_allocated);
 
 	/* addr==NULL means that the first level allocation failed */
 	if (!addr)
@@ -292,18 +292,18 @@ long pnv_pci_ioda2_table_alloc_pages(int nid, __u64 bus_offset,
 	 * we did not allocate as much as we wanted,
 	 * release partially allocated table.
 	 */
-	if (tmplevels == levels && offset < tce_table_size)
+	if (levels == 1 && offset < tce_table_size)
 		goto free_tces_exit;
 
 	/* Allocate userspace view of the TCE table */
 	if (alloc_userspace_copy) {
 		offset = 0;
 		uas = pnv_pci_ioda2_table_do_alloc_pages(nid, level_shift,
-				tmplevels, tce_table_size, &offset,
+				1, tce_table_size, &offset,
 				&total_allocated_uas);
 		if (!uas)
 			goto free_tces_exit;
-		if (tmplevels == levels && (offset < tce_table_size ||
+		if (levels == 1 && (offset < tce_table_size ||
 				total_allocated_uas != total_allocated))
 			goto free_uas_exit;
 	}
@@ -318,7 +318,7 @@ long pnv_pci_ioda2_table_alloc_pages(int nid, __u64 bus_offset,
 
 	pr_debug("Created TCE table: ws=%08llx ts=%lx @%08llx base=%lx uas=%p levels=%d/%d\n",
 			window_size, tce_table_size, bus_offset, tbl->it_base,
-			tbl->it_userspace, tmplevels, levels);
+			tbl->it_userspace, 1, levels);
 
 	return 0;
 
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index 8b37b28e38318..e302aa092d4f1 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -243,7 +243,7 @@ extern void pnv_npu_release_ownership(struct pnv_ioda_pe *npe);
 extern int pnv_npu2_init(struct pnv_phb *phb);
 
 /* pci-ioda-tce.c */
-#define POWERNV_IOMMU_DEFAULT_LEVELS	1
+#define POWERNV_IOMMU_DEFAULT_LEVELS	2
 #define POWERNV_IOMMU_MAX_LEVELS	5
 
 extern int pnv_tce_build(struct iommu_table *tbl, long index, long npages,
-- 
2.20.1

[PATCH AUTOSEL 4.19 18/50] drm/amd/powerplay/smu7: enforce minimal VBITimeout (v2)

[Sasha Levin]

From: Ahzo <Ahzo@tutanota.com>

[ Upstream commit f659bb6dae58c113805f92822e4c16ddd3156b79 ]

This fixes screen corruption/flickering on 75 Hz displays.

v2: make print statement debug only (Alex)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102646
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Ahzo <Ahzo@tutanota.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c
index b52ccab428a9e..c7c505095402d 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c
@@ -4052,6 +4052,11 @@ static int smu7_program_display_gap(struct pp_hwmgr *hwmgr)
 
 	data->frame_time_x2 = frame_time_in_us * 2 / 100;
 
+	if (data->frame_time_x2 < 280) {
+		pr_debug("%s: enforce minimal VBITimeout: %d -> 280\n", __func__, data->frame_time_x2);
+		data->frame_time_x2 = 280;
+	}
+
 	display_gap2 = pre_vbi_time_in_us * (ref_clock / 100);
 
 	cgs_write_ind_register(hwmgr->device, CGS_IND_REG__SMC, ixCG_DISPLAY_GAP_CNTL2, display_gap2);
-- 
2.20.1

[PATCH AUTOSEL 4.19 18/50] drm/amd/powerplay/smu7: enforce minimal VBITimeout (v2)

[Sasha Levin]

From: Ahzo <Ahzo@tutanota.com>

[ Upstream commit f659bb6dae58c113805f92822e4c16ddd3156b79 ]

This fixes screen corruption/flickering on 75 Hz displays.

v2: make print statement debug only (Alex)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102646
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Ahzo <Ahzo@tutanota.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c
index b52ccab428a9e..c7c505095402d 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c
@@ -4052,6 +4052,11 @@ static int smu7_program_display_gap(struct pp_hwmgr *hwmgr)
 
 	data->frame_time_x2 = frame_time_in_us * 2 / 100;
 
+	if (data->frame_time_x2 < 280) {
+		pr_debug("%s: enforce minimal VBITimeout: %d -> 280\n", __func__, data->frame_time_x2);
+		data->frame_time_x2 = 280;
+	}
+
 	display_gap2 = pre_vbi_time_in_us * (ref_clock / 100);
 
 	cgs_write_ind_register(hwmgr->device, CGS_IND_REG__SMC, ixCG_DISPLAY_GAP_CNTL2, display_gap2);
-- 
2.20.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 4.19 19/50] clk: actions: Don't reference clk_init_data after registration

[Sasha Levin]

From: Stephen Boyd <sboyd@kernel.org>

[ Upstream commit cf9ec1fc6d7cceb73e7f1efd079d2eae173fdf57 ]

A future patch is going to change semantics of clk_register() so that
clk_hw::init is guaranteed to be NULL after a clk is registered. Avoid
referencing this member here so that we don't run into NULL pointer
exceptions.

Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190731193517.237136-2-sboyd@kernel.org
[sboyd@kernel.org: Move name to after checking for error or NULL hw]
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/actions/owl-common.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/actions/owl-common.c b/drivers/clk/actions/owl-common.c
index 61c1071b5180a..e9be34b17f3f5 100644
--- a/drivers/clk/actions/owl-common.c
+++ b/drivers/clk/actions/owl-common.c
@@ -67,16 +67,17 @@ int owl_clk_probe(struct device *dev, struct clk_hw_onecell_data *hw_clks)
 	struct clk_hw *hw;
 
 	for (i = 0; i < hw_clks->num; i++) {
+		const char *name;
 
 		hw = hw_clks->hws[i];
-
 		if (IS_ERR_OR_NULL(hw))
 			continue;
 
+		name = hw->init->name;
 		ret = devm_clk_hw_register(dev, hw);
 		if (ret) {
 			dev_err(dev, "Couldn't register clock %d - %s\n",
-				i, hw->init->name);
+				i, name);
 			return ret;
 		}
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.19 20/50] clk: sirf: Don't reference clk_init_data after registration

[Sasha Levin]

From: Stephen Boyd <sboyd@kernel.org>

[ Upstream commit af55dadfbce35b4f4c6247244ce3e44b2e242b84 ]

A future patch is going to change semantics of clk_register() so that
clk_hw::init is guaranteed to be NULL after a clk is registered. Avoid
referencing this member here so that we don't run into NULL pointer
exceptions.

Cc: Guo Zeng <Guo.Zeng@csr.com>
Cc: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190731193517.237136-6-sboyd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/sirf/clk-common.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/sirf/clk-common.c b/drivers/clk/sirf/clk-common.c
index d8f9efa5129ad..25351d6a55ba2 100644
--- a/drivers/clk/sirf/clk-common.c
+++ b/drivers/clk/sirf/clk-common.c
@@ -298,9 +298,10 @@ static u8 dmn_clk_get_parent(struct clk_hw *hw)
 {
 	struct clk_dmn *clk = to_dmnclk(hw);
 	u32 cfg = clkc_readl(clk->regofs);
+	const char *name = clk_hw_get_name(hw);
 
 	/* parent of io domain can only be pll3 */
-	if (strcmp(hw->init->name, "io") == 0)
+	if (strcmp(name, "io") == 0)
 		return 4;
 
 	WARN_ON((cfg & (BIT(3) - 1)) > 4);
@@ -312,9 +313,10 @@ static int dmn_clk_set_parent(struct clk_hw *hw, u8 parent)
 {
 	struct clk_dmn *clk = to_dmnclk(hw);
 	u32 cfg = clkc_readl(clk->regofs);
+	const char *name = clk_hw_get_name(hw);
 
 	/* parent of io domain can only be pll3 */
-	if (strcmp(hw->init->name, "io") == 0)
+	if (strcmp(name, "io") == 0)
 		return -EINVAL;
 
 	cfg &= ~(BIT(3) - 1);
@@ -354,7 +356,8 @@ static long dmn_clk_round_rate(struct clk_hw *hw, unsigned long rate,
 {
 	unsigned long fin;
 	unsigned ratio, wait, hold;
-	unsigned bits = (strcmp(hw->init->name, "mem") == 0) ? 3 : 4;
+	const char *name = clk_hw_get_name(hw);
+	unsigned bits = (strcmp(name, "mem") == 0) ? 3 : 4;
 
 	fin = *parent_rate;
 	ratio = fin / rate;
@@ -376,7 +379,8 @@ static int dmn_clk_set_rate(struct clk_hw *hw, unsigned long rate,
 	struct clk_dmn *clk = to_dmnclk(hw);
 	unsigned long fin;
 	unsigned ratio, wait, hold, reg;
-	unsigned bits = (strcmp(hw->init->name, "mem") == 0) ? 3 : 4;
+	const char *name = clk_hw_get_name(hw);
+	unsigned bits = (strcmp(name, "mem") == 0) ? 3 : 4;
 
 	fin = parent_rate;
 	ratio = fin / rate;
-- 
2.20.1

[PATCH AUTOSEL 4.19 21/50] clk: sprd: Don't reference clk_init_data after registration

[Sasha Levin]

From: Stephen Boyd <sboyd@kernel.org>

[ Upstream commit f6c90df8e7e33c3dc33d4d7471bc42c232b0510e ]

A future patch is going to change semantics of clk_register() so that
clk_hw::init is guaranteed to be NULL after a clk is registered. Avoid
referencing this member here so that we don't run into NULL pointer
exceptions.

Cc: Chunyan Zhang <zhang.chunyan@linaro.org>
Cc: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190731193517.237136-8-sboyd@kernel.org
Acked-by: Baolin Wang <baolin.wang@linaro.org>
Acked-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/sprd/common.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/sprd/common.c b/drivers/clk/sprd/common.c
index e038b04472061..8bdab1c3013b8 100644
--- a/drivers/clk/sprd/common.c
+++ b/drivers/clk/sprd/common.c
@@ -71,16 +71,17 @@ int sprd_clk_probe(struct device *dev, struct clk_hw_onecell_data *clkhw)
 	struct clk_hw *hw;
 
 	for (i = 0; i < clkhw->num; i++) {
+		const char *name;
 
 		hw = clkhw->hws[i];
-
 		if (!hw)
 			continue;
 
+		name = hw->init->name;
 		ret = devm_clk_hw_register(dev, hw);
 		if (ret) {
 			dev_err(dev, "Couldn't register clock %d - %s\n",
-				i, hw->init->name);
+				i, name);
 			return ret;
 		}
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.19 22/50] clk: zx296718: Don't reference clk_init_data after registration

[Sasha Levin]

From: Stephen Boyd <sboyd@kernel.org>

[ Upstream commit 1a4549c150e27dbc3aea762e879a88209df6d1a5 ]

A future patch is going to change semantics of clk_register() so that
clk_hw::init is guaranteed to be NULL after a clk is registered. Avoid
referencing this member here so that we don't run into NULL pointer
exceptions.

Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190815160020.183334-3-sboyd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/zte/clk-zx296718.c | 109 +++++++++++++++------------------
 1 file changed, 49 insertions(+), 60 deletions(-)

diff --git a/drivers/clk/zte/clk-zx296718.c b/drivers/clk/zte/clk-zx296718.c
index 354dd508c5169..8dfb8523b79db 100644
--- a/drivers/clk/zte/clk-zx296718.c
+++ b/drivers/clk/zte/clk-zx296718.c
@@ -567,6 +567,7 @@ static int __init top_clocks_init(struct device_node *np)
 {
 	void __iomem *reg_base;
 	int i, ret;
+	const char *name;
 
 	reg_base = of_iomap(np, 0);
 	if (!reg_base) {
@@ -576,11 +577,10 @@ static int __init top_clocks_init(struct device_node *np)
 
 	for (i = 0; i < ARRAY_SIZE(zx296718_pll_clk); i++) {
 		zx296718_pll_clk[i].reg_base += (uintptr_t)reg_base;
+		name = zx296718_pll_clk[i].hw.init->name;
 		ret = clk_hw_register(NULL, &zx296718_pll_clk[i].hw);
-		if (ret) {
-			pr_warn("top clk %s init error!\n",
-				zx296718_pll_clk[i].hw.init->name);
-		}
+		if (ret)
+			pr_warn("top clk %s init error!\n", name);
 	}
 
 	for (i = 0; i < ARRAY_SIZE(top_ffactor_clk); i++) {
@@ -588,11 +588,10 @@ static int __init top_clocks_init(struct device_node *np)
 			top_hw_onecell_data.hws[top_ffactor_clk[i].id] =
 					&top_ffactor_clk[i].factor.hw;
 
+		name = top_ffactor_clk[i].factor.hw.init->name;
 		ret = clk_hw_register(NULL, &top_ffactor_clk[i].factor.hw);
-		if (ret) {
-			pr_warn("top clk %s init error!\n",
-				top_ffactor_clk[i].factor.hw.init->name);
-		}
+		if (ret)
+			pr_warn("top clk %s init error!\n", name);
 	}
 
 	for (i = 0; i < ARRAY_SIZE(top_mux_clk); i++) {
@@ -601,11 +600,10 @@ static int __init top_clocks_init(struct device_node *np)
 					&top_mux_clk[i].mux.hw;
 
 		top_mux_clk[i].mux.reg += (uintptr_t)reg_base;
+		name = top_mux_clk[i].mux.hw.init->name;
 		ret = clk_hw_register(NULL, &top_mux_clk[i].mux.hw);
-		if (ret) {
-			pr_warn("top clk %s init error!\n",
-				top_mux_clk[i].mux.hw.init->name);
-		}
+		if (ret)
+			pr_warn("top clk %s init error!\n", name);
 	}
 
 	for (i = 0; i < ARRAY_SIZE(top_gate_clk); i++) {
@@ -614,11 +612,10 @@ static int __init top_clocks_init(struct device_node *np)
 					&top_gate_clk[i].gate.hw;
 
 		top_gate_clk[i].gate.reg += (uintptr_t)reg_base;
+		name = top_gate_clk[i].gate.hw.init->name;
 		ret = clk_hw_register(NULL, &top_gate_clk[i].gate.hw);
-		if (ret) {
-			pr_warn("top clk %s init error!\n",
-				top_gate_clk[i].gate.hw.init->name);
-		}
+		if (ret)
+			pr_warn("top clk %s init error!\n", name);
 	}
 
 	for (i = 0; i < ARRAY_SIZE(top_div_clk); i++) {
@@ -627,11 +624,10 @@ static int __init top_clocks_init(struct device_node *np)
 					&top_div_clk[i].div.hw;
 
 		top_div_clk[i].div.reg += (uintptr_t)reg_base;
+		name = top_div_clk[i].div.hw.init->name;
 		ret = clk_hw_register(NULL, &top_div_clk[i].div.hw);
-		if (ret) {
-			pr_warn("top clk %s init error!\n",
-				top_div_clk[i].div.hw.init->name);
-		}
+		if (ret)
+			pr_warn("top clk %s init error!\n", name);
 	}
 
 	ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get,
@@ -757,6 +753,7 @@ static int __init lsp0_clocks_init(struct device_node *np)
 {
 	void __iomem *reg_base;
 	int i, ret;
+	const char *name;
 
 	reg_base = of_iomap(np, 0);
 	if (!reg_base) {
@@ -770,11 +767,10 @@ static int __init lsp0_clocks_init(struct device_node *np)
 					&lsp0_mux_clk[i].mux.hw;
 
 		lsp0_mux_clk[i].mux.reg += (uintptr_t)reg_base;
+		name = lsp0_mux_clk[i].mux.hw.init->name;
 		ret = clk_hw_register(NULL, &lsp0_mux_clk[i].mux.hw);
-		if (ret) {
-			pr_warn("lsp0 clk %s init error!\n",
-				lsp0_mux_clk[i].mux.hw.init->name);
-		}
+		if (ret)
+			pr_warn("lsp0 clk %s init error!\n", name);
 	}
 
 	for (i = 0; i < ARRAY_SIZE(lsp0_gate_clk); i++) {
@@ -783,11 +779,10 @@ static int __init lsp0_clocks_init(struct device_node *np)
 					&lsp0_gate_clk[i].gate.hw;
 
 		lsp0_gate_clk[i].gate.reg += (uintptr_t)reg_base;
+		name = lsp0_gate_clk[i].gate.hw.init->name;
 		ret = clk_hw_register(NULL, &lsp0_gate_clk[i].gate.hw);
-		if (ret) {
-			pr_warn("lsp0 clk %s init error!\n",
-				lsp0_gate_clk[i].gate.hw.init->name);
-		}
+		if (ret)
+			pr_warn("lsp0 clk %s init error!\n", name);
 	}
 
 	for (i = 0; i < ARRAY_SIZE(lsp0_div_clk); i++) {
@@ -796,11 +791,10 @@ static int __init lsp0_clocks_init(struct device_node *np)
 					&lsp0_div_clk[i].div.hw;
 
 		lsp0_div_clk[i].div.reg += (uintptr_t)reg_base;
+		name = lsp0_div_clk[i].div.hw.init->name;
 		ret = clk_hw_register(NULL, &lsp0_div_clk[i].div.hw);
-		if (ret) {
-			pr_warn("lsp0 clk %s init error!\n",
-				lsp0_div_clk[i].div.hw.init->name);
-		}
+		if (ret)
+			pr_warn("lsp0 clk %s init error!\n", name);
 	}
 
 	ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get,
@@ -865,6 +859,7 @@ static int __init lsp1_clocks_init(struct device_node *np)
 {
 	void __iomem *reg_base;
 	int i, ret;
+	const char *name;
 
 	reg_base = of_iomap(np, 0);
 	if (!reg_base) {
@@ -878,11 +873,10 @@ static int __init lsp1_clocks_init(struct device_node *np)
 					&lsp0_mux_clk[i].mux.hw;
 
 		lsp1_mux_clk[i].mux.reg += (uintptr_t)reg_base;
+		name = lsp1_mux_clk[i].mux.hw.init->name;
 		ret = clk_hw_register(NULL, &lsp1_mux_clk[i].mux.hw);
-		if (ret) {
-			pr_warn("lsp1 clk %s init error!\n",
-				lsp1_mux_clk[i].mux.hw.init->name);
-		}
+		if (ret)
+			pr_warn("lsp1 clk %s init error!\n", name);
 	}
 
 	for (i = 0; i < ARRAY_SIZE(lsp1_gate_clk); i++) {
@@ -891,11 +885,10 @@ static int __init lsp1_clocks_init(struct device_node *np)
 					&lsp1_gate_clk[i].gate.hw;
 
 		lsp1_gate_clk[i].gate.reg += (uintptr_t)reg_base;
+		name = lsp1_gate_clk[i].gate.hw.init->name;
 		ret = clk_hw_register(NULL, &lsp1_gate_clk[i].gate.hw);
-		if (ret) {
-			pr_warn("lsp1 clk %s init error!\n",
-				lsp1_gate_clk[i].gate.hw.init->name);
-		}
+		if (ret)
+			pr_warn("lsp1 clk %s init error!\n", name);
 	}
 
 	for (i = 0; i < ARRAY_SIZE(lsp1_div_clk); i++) {
@@ -904,11 +897,10 @@ static int __init lsp1_clocks_init(struct device_node *np)
 					&lsp1_div_clk[i].div.hw;
 
 		lsp1_div_clk[i].div.reg += (uintptr_t)reg_base;
+		name = lsp1_div_clk[i].div.hw.init->name;
 		ret = clk_hw_register(NULL, &lsp1_div_clk[i].div.hw);
-		if (ret) {
-			pr_warn("lsp1 clk %s init error!\n",
-				lsp1_div_clk[i].div.hw.init->name);
-		}
+		if (ret)
+			pr_warn("lsp1 clk %s init error!\n", name);
 	}
 
 	ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get,
@@ -982,6 +974,7 @@ static int __init audio_clocks_init(struct device_node *np)
 {
 	void __iomem *reg_base;
 	int i, ret;
+	const char *name;
 
 	reg_base = of_iomap(np, 0);
 	if (!reg_base) {
@@ -995,11 +988,10 @@ static int __init audio_clocks_init(struct device_node *np)
 					&audio_mux_clk[i].mux.hw;
 
 		audio_mux_clk[i].mux.reg += (uintptr_t)reg_base;
+		name = audio_mux_clk[i].mux.hw.init->name;
 		ret = clk_hw_register(NULL, &audio_mux_clk[i].mux.hw);
-		if (ret) {
-			pr_warn("audio clk %s init error!\n",
-				audio_mux_clk[i].mux.hw.init->name);
-		}
+		if (ret)
+			pr_warn("audio clk %s init error!\n", name);
 	}
 
 	for (i = 0; i < ARRAY_SIZE(audio_adiv_clk); i++) {
@@ -1008,11 +1000,10 @@ static int __init audio_clocks_init(struct device_node *np)
 					&audio_adiv_clk[i].hw;
 
 		audio_adiv_clk[i].reg_base += (uintptr_t)reg_base;
+		name = audio_adiv_clk[i].hw.init->name;
 		ret = clk_hw_register(NULL, &audio_adiv_clk[i].hw);
-		if (ret) {
-			pr_warn("audio clk %s init error!\n",
-				audio_adiv_clk[i].hw.init->name);
-		}
+		if (ret)
+			pr_warn("audio clk %s init error!\n", name);
 	}
 
 	for (i = 0; i < ARRAY_SIZE(audio_div_clk); i++) {
@@ -1021,11 +1012,10 @@ static int __init audio_clocks_init(struct device_node *np)
 					&audio_div_clk[i].div.hw;
 
 		audio_div_clk[i].div.reg += (uintptr_t)reg_base;
+		name = audio_div_clk[i].div.hw.init->name;
 		ret = clk_hw_register(NULL, &audio_div_clk[i].div.hw);
-		if (ret) {
-			pr_warn("audio clk %s init error!\n",
-				audio_div_clk[i].div.hw.init->name);
-		}
+		if (ret)
+			pr_warn("audio clk %s init error!\n", name);
 	}
 
 	for (i = 0; i < ARRAY_SIZE(audio_gate_clk); i++) {
@@ -1034,11 +1024,10 @@ static int __init audio_clocks_init(struct device_node *np)
 					&audio_gate_clk[i].gate.hw;
 
 		audio_gate_clk[i].gate.reg += (uintptr_t)reg_base;
+		name = audio_gate_clk[i].gate.hw.init->name;
 		ret = clk_hw_register(NULL, &audio_gate_clk[i].gate.hw);
-		if (ret) {
-			pr_warn("audio clk %s init error!\n",
-				audio_gate_clk[i].gate.hw.init->name);
-		}
+		if (ret)
+			pr_warn("audio clk %s init error!\n", name);
 	}
 
 	ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get,
-- 
2.20.1

[PATCH AUTOSEL 4.19 23/50] powerpc/xmon: Check for HV mode when dumping XIVE info from OPAL

[Sasha Levin]

From: Cédric Le Goater <clg@kaod.org>

[ Upstream commit c3e0dbd7f780a58c4695f1cd8fc8afde80376737 ]

Currently, the xmon 'dx' command calls OPAL to dump the XIVE state in
the OPAL logs and also outputs some of the fields of the internal XIVE
structures in Linux. The OPAL calls can only be done on baremetal
(PowerNV) and they crash a pseries machine. Fix by checking the
hypervisor feature of the CPU.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190814154754.23682-2-clg@kaod.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/xmon/xmon.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 74cfc1be04d6e..bb5db7bfd8539 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -2497,13 +2497,16 @@ static void dump_pacas(void)
 static void dump_one_xive(int cpu)
 {
 	unsigned int hwid = get_hard_smp_processor_id(cpu);
+	bool hv = cpu_has_feature(CPU_FTR_HVMODE);
 
-	opal_xive_dump(XIVE_DUMP_TM_HYP, hwid);
-	opal_xive_dump(XIVE_DUMP_TM_POOL, hwid);
-	opal_xive_dump(XIVE_DUMP_TM_OS, hwid);
-	opal_xive_dump(XIVE_DUMP_TM_USER, hwid);
-	opal_xive_dump(XIVE_DUMP_VP, hwid);
-	opal_xive_dump(XIVE_DUMP_EMU_STATE, hwid);
+	if (hv) {
+		opal_xive_dump(XIVE_DUMP_TM_HYP, hwid);
+		opal_xive_dump(XIVE_DUMP_TM_POOL, hwid);
+		opal_xive_dump(XIVE_DUMP_TM_OS, hwid);
+		opal_xive_dump(XIVE_DUMP_TM_USER, hwid);
+		opal_xive_dump(XIVE_DUMP_VP, hwid);
+		opal_xive_dump(XIVE_DUMP_EMU_STATE, hwid);
+	}
 
 	if (setjmp(bus_error_jmp) != 0) {
 		catch_memory_errors = 0;
-- 
2.20.1

[PATCH AUTOSEL 4.19 23/50] powerpc/xmon: Check for HV mode when dumping XIVE info from OPAL

[Sasha Levin]

From: Cédric Le Goater <clg@kaod.org>

[ Upstream commit c3e0dbd7f780a58c4695f1cd8fc8afde80376737 ]

Currently, the xmon 'dx' command calls OPAL to dump the XIVE state in
the OPAL logs and also outputs some of the fields of the internal XIVE
structures in Linux. The OPAL calls can only be done on baremetal
(PowerNV) and they crash a pseries machine. Fix by checking the
hypervisor feature of the CPU.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190814154754.23682-2-clg@kaod.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/xmon/xmon.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 74cfc1be04d6e..bb5db7bfd8539 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -2497,13 +2497,16 @@ static void dump_pacas(void)
 static void dump_one_xive(int cpu)
 {
 	unsigned int hwid = get_hard_smp_processor_id(cpu);
+	bool hv = cpu_has_feature(CPU_FTR_HVMODE);
 
-	opal_xive_dump(XIVE_DUMP_TM_HYP, hwid);
-	opal_xive_dump(XIVE_DUMP_TM_POOL, hwid);
-	opal_xive_dump(XIVE_DUMP_TM_OS, hwid);
-	opal_xive_dump(XIVE_DUMP_TM_USER, hwid);
-	opal_xive_dump(XIVE_DUMP_VP, hwid);
-	opal_xive_dump(XIVE_DUMP_EMU_STATE, hwid);
+	if (hv) {
+		opal_xive_dump(XIVE_DUMP_TM_HYP, hwid);
+		opal_xive_dump(XIVE_DUMP_TM_POOL, hwid);
+		opal_xive_dump(XIVE_DUMP_TM_OS, hwid);
+		opal_xive_dump(XIVE_DUMP_TM_USER, hwid);
+		opal_xive_dump(XIVE_DUMP_VP, hwid);
+		opal_xive_dump(XIVE_DUMP_EMU_STATE, hwid);
+	}
 
 	if (setjmp(bus_error_jmp) != 0) {
 		catch_memory_errors = 0;
-- 
2.20.1

[PATCH AUTOSEL 4.19 24/50] powerpc/rtas: use device model APIs and serialization during LPM

[Sasha Levin]

From: Nathan Lynch <nathanl@linux.ibm.com>

[ Upstream commit a6717c01ddc259f6f73364779df058e2c67309f8 ]

The LPAR migration implementation and userspace-initiated cpu hotplug
can interleave their executions like so:

1. Set cpu 7 offline via sysfs.

2. Begin a partition migration, whose implementation requires the OS
   to ensure all present cpus are online; cpu 7 is onlined:

     rtas_ibm_suspend_me -> rtas_online_cpus_mask -> cpu_up

   This sets cpu 7 online in all respects except for the cpu's
   corresponding struct device; dev->offline remains true.

3. Set cpu 7 online via sysfs. _cpu_up() determines that cpu 7 is
   already online and returns success. The driver core (device_online)
   sets dev->offline = false.

4. The migration completes and restores cpu 7 to offline state:

     rtas_ibm_suspend_me -> rtas_offline_cpus_mask -> cpu_down

This leaves cpu7 in a state where the driver core considers the cpu
device online, but in all other respects it is offline and
unused. Attempts to online the cpu via sysfs appear to succeed but the
driver core actually does not pass the request to the lower-level
cpuhp support code. This makes the cpu unusable until the cpu device
is manually set offline and then online again via sysfs.

Instead of directly calling cpu_up/cpu_down, the migration code should
use the higher-level device core APIs to maintain consistent state and
serialize operations.

Fixes: 120496ac2d2d ("powerpc: Bring all threads online prior to migration/hibernation")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190802192926.19277-2-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/rtas.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 8afd146bc9c70..9e41a9de43235 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -875,15 +875,17 @@ static int rtas_cpu_state_change_mask(enum rtas_cpu_state state,
 		return 0;
 
 	for_each_cpu(cpu, cpus) {
+		struct device *dev = get_cpu_device(cpu);
+
 		switch (state) {
 		case DOWN:
-			cpuret = cpu_down(cpu);
+			cpuret = device_offline(dev);
 			break;
 		case UP:
-			cpuret = cpu_up(cpu);
+			cpuret = device_online(dev);
 			break;
 		}
-		if (cpuret) {
+		if (cpuret < 0) {
 			pr_debug("%s: cpu_%s for cpu#%d returned %d.\n",
 					__func__,
 					((state == UP) ? "up" : "down"),
@@ -972,6 +974,8 @@ int rtas_ibm_suspend_me(u64 handle)
 	data.token = rtas_token("ibm,suspend-me");
 	data.complete = &done;
 
+	lock_device_hotplug();
+
 	/* All present CPUs must be online */
 	cpumask_andnot(offline_mask, cpu_present_mask, cpu_online_mask);
 	cpuret = rtas_online_cpus_mask(offline_mask);
@@ -1003,6 +1007,7 @@ int rtas_ibm_suspend_me(u64 handle)
 				__func__);
 
 out:
+	unlock_device_hotplug();
 	free_cpumask_var(offline_mask);
 	return atomic_read(&data.error);
 }
-- 
2.20.1

[PATCH AUTOSEL 4.19 24/50] powerpc/rtas: use device model APIs and serialization during LPM

[Sasha Levin]

From: Nathan Lynch <nathanl@linux.ibm.com>

[ Upstream commit a6717c01ddc259f6f73364779df058e2c67309f8 ]

The LPAR migration implementation and userspace-initiated cpu hotplug
can interleave their executions like so:

1. Set cpu 7 offline via sysfs.

2. Begin a partition migration, whose implementation requires the OS
   to ensure all present cpus are online; cpu 7 is onlined:

     rtas_ibm_suspend_me -> rtas_online_cpus_mask -> cpu_up

   This sets cpu 7 online in all respects except for the cpu's
   corresponding struct device; dev->offline remains true.

3. Set cpu 7 online via sysfs. _cpu_up() determines that cpu 7 is
   already online and returns success. The driver core (device_online)
   sets dev->offline = false.

4. The migration completes and restores cpu 7 to offline state:

     rtas_ibm_suspend_me -> rtas_offline_cpus_mask -> cpu_down

This leaves cpu7 in a state where the driver core considers the cpu
device online, but in all other respects it is offline and
unused. Attempts to online the cpu via sysfs appear to succeed but the
driver core actually does not pass the request to the lower-level
cpuhp support code. This makes the cpu unusable until the cpu device
is manually set offline and then online again via sysfs.

Instead of directly calling cpu_up/cpu_down, the migration code should
use the higher-level device core APIs to maintain consistent state and
serialize operations.

Fixes: 120496ac2d2d ("powerpc: Bring all threads online prior to migration/hibernation")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190802192926.19277-2-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/rtas.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 8afd146bc9c70..9e41a9de43235 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -875,15 +875,17 @@ static int rtas_cpu_state_change_mask(enum rtas_cpu_state state,
 		return 0;
 
 	for_each_cpu(cpu, cpus) {
+		struct device *dev = get_cpu_device(cpu);
+
 		switch (state) {
 		case DOWN:
-			cpuret = cpu_down(cpu);
+			cpuret = device_offline(dev);
 			break;
 		case UP:
-			cpuret = cpu_up(cpu);
+			cpuret = device_online(dev);
 			break;
 		}
-		if (cpuret) {
+		if (cpuret < 0) {
 			pr_debug("%s: cpu_%s for cpu#%d returned %d.\n",
 					__func__,
 					((state == UP) ? "up" : "down"),
@@ -972,6 +974,8 @@ int rtas_ibm_suspend_me(u64 handle)
 	data.token = rtas_token("ibm,suspend-me");
 	data.complete = &done;
 
+	lock_device_hotplug();
+
 	/* All present CPUs must be online */
 	cpumask_andnot(offline_mask, cpu_present_mask, cpu_online_mask);
 	cpuret = rtas_online_cpus_mask(offline_mask);
@@ -1003,6 +1007,7 @@ int rtas_ibm_suspend_me(u64 handle)
 				__func__);
 
 out:
+	unlock_device_hotplug();
 	free_cpumask_var(offline_mask);
 	return atomic_read(&data.error);
 }
-- 
2.20.1

[PATCH AUTOSEL 4.19 25/50] powerpc/futex: Fix warning: 'oldval' may be used uninitialized in this function

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@c-s.fr>

[ Upstream commit 38a0d0cdb46d3f91534e5b9839ec2d67be14c59d ]

We see warnings such as:
  kernel/futex.c: In function 'do_futex':
  kernel/futex.c:1676:17: warning: 'oldval' may be used uninitialized in this function [-Wmaybe-uninitialized]
     return oldval == cmparg;
                   ^
  kernel/futex.c:1651:6: note: 'oldval' was declared here
    int oldval, ret;
        ^

This is because arch_futex_atomic_op_inuser() only sets *oval if ret
is 0 and GCC doesn't see that it will only use it when ret is 0.

Anyway, the non-zero ret path is an error path that won't suffer from
setting *oval, and as *oval is a local var in futex_atomic_op_inuser()
it will have no impact.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: reword change log slightly]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/86b72f0c134367b214910b27b9a6dd3321af93bb.1565774657.git.christophe.leroy@c-s.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/futex.h | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/powerpc/include/asm/futex.h b/arch/powerpc/include/asm/futex.h
index 94542776a62d6..2a7b01f97a56b 100644
--- a/arch/powerpc/include/asm/futex.h
+++ b/arch/powerpc/include/asm/futex.h
@@ -59,8 +59,7 @@ static inline int arch_futex_atomic_op_inuser(int op, int oparg, int *oval,
 
 	pagefault_enable();
 
-	if (!ret)
-		*oval = oldval;
+	*oval = oldval;
 
 	return ret;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.19 25/50] powerpc/futex: Fix warning: 'oldval' may be used uninitialized in this function

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@c-s.fr>

[ Upstream commit 38a0d0cdb46d3f91534e5b9839ec2d67be14c59d ]

We see warnings such as:
  kernel/futex.c: In function 'do_futex':
  kernel/futex.c:1676:17: warning: 'oldval' may be used uninitialized in this function [-Wmaybe-uninitialized]
     return oldval == cmparg;
                   ^
  kernel/futex.c:1651:6: note: 'oldval' was declared here
    int oldval, ret;
        ^

This is because arch_futex_atomic_op_inuser() only sets *oval if ret
is 0 and GCC doesn't see that it will only use it when ret is 0.

Anyway, the non-zero ret path is an error path that won't suffer from
setting *oval, and as *oval is a local var in futex_atomic_op_inuser()
it will have no impact.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: reword change log slightly]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/86b72f0c134367b214910b27b9a6dd3321af93bb.1565774657.git.christophe.leroy@c-s.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/futex.h | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/powerpc/include/asm/futex.h b/arch/powerpc/include/asm/futex.h
index 94542776a62d6..2a7b01f97a56b 100644
--- a/arch/powerpc/include/asm/futex.h
+++ b/arch/powerpc/include/asm/futex.h
@@ -59,8 +59,7 @@ static inline int arch_futex_atomic_op_inuser(int op, int oparg, int *oval,
 
 	pagefault_enable();
 
-	if (!ret)
-		*oval = oldval;
+	*oval = oldval;
 
 	return ret;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.19 26/50] powerpc/64s/radix: Remove redundant pfn_pte bitop, add VM_BUG_ON

[Sasha Levin]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit 6bb25170d7a44ef0ed9677814600f0785e7421d1 ]

pfn_pte is never given a pte above the addressable physical memory
limit, so the masking is redundant. In case of a software bug, it
is not obviously better to silently truncate the pfn than to corrupt
the pte (either one will result in memory corruption or crashes),
so there is no reason to add this to the fast path.

Add VM_BUG_ON to catch cases where the pfn is invalid. These would
catch the create_section_mapping bug fixed by a previous commit.

  [16885.256466] ------------[ cut here ]------------
  [16885.256492] kernel BUG at arch/powerpc/include/asm/book3s/64/pgtable.h:612!
  cpu 0x0: Vector: 700 (Program Check) at [c0000000ee0a36d0]
      pc: c000000000080738: __map_kernel_page+0x248/0x6f0
      lr: c000000000080ac0: __map_kernel_page+0x5d0/0x6f0
      sp: c0000000ee0a3960
     msr: 9000000000029033
    current = 0xc0000000ec63b400
    paca    = 0xc0000000017f0000   irqmask: 0x03   irq_happened: 0x01
      pid   = 85, comm = sh
  kernel BUG at arch/powerpc/include/asm/book3s/64/pgtable.h:612!
  Linux version 5.3.0-rc1-00001-g0fe93e5f3394
  enter ? for help
  [c0000000ee0a3a00] c000000000d37378 create_physical_mapping+0x260/0x360
  [c0000000ee0a3b10] c000000000d370bc create_section_mapping+0x1c/0x3c
  [c0000000ee0a3b30] c000000000071f54 arch_add_memory+0x74/0x130

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190724084638.24982-5-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/book3s/64/pgtable.h | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/include/asm/book3s/64/pgtable.h b/arch/powerpc/include/asm/book3s/64/pgtable.h
index 855dbae6d351d..a717640b7eda4 100644
--- a/arch/powerpc/include/asm/book3s/64/pgtable.h
+++ b/arch/powerpc/include/asm/book3s/64/pgtable.h
@@ -629,8 +629,10 @@ static inline bool pte_access_permitted(pte_t pte, bool write)
  */
 static inline pte_t pfn_pte(unsigned long pfn, pgprot_t pgprot)
 {
-	return __pte((((pte_basic_t)(pfn) << PAGE_SHIFT) & PTE_RPN_MASK) |
-		     pgprot_val(pgprot));
+	VM_BUG_ON(pfn >> (64 - PAGE_SHIFT));
+	VM_BUG_ON((pfn << PAGE_SHIFT) & ~PTE_RPN_MASK);
+
+	return __pte(((pte_basic_t)pfn << PAGE_SHIFT) | pgprot_val(pgprot));
 }
 
 static inline unsigned long pte_pfn(pte_t pte)
-- 
2.20.1

[PATCH AUTOSEL 4.19 26/50] powerpc/64s/radix: Remove redundant pfn_pte bitop, add VM_BUG_ON

[Sasha Levin]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit 6bb25170d7a44ef0ed9677814600f0785e7421d1 ]

pfn_pte is never given a pte above the addressable physical memory
limit, so the masking is redundant. In case of a software bug, it
is not obviously better to silently truncate the pfn than to corrupt
the pte (either one will result in memory corruption or crashes),
so there is no reason to add this to the fast path.

Add VM_BUG_ON to catch cases where the pfn is invalid. These would
catch the create_section_mapping bug fixed by a previous commit.

  [16885.256466] ------------[ cut here ]------------
  [16885.256492] kernel BUG at arch/powerpc/include/asm/book3s/64/pgtable.h:612!
  cpu 0x0: Vector: 700 (Program Check) at [c0000000ee0a36d0]
      pc: c000000000080738: __map_kernel_page+0x248/0x6f0
      lr: c000000000080ac0: __map_kernel_page+0x5d0/0x6f0
      sp: c0000000ee0a3960
     msr: 9000000000029033
    current = 0xc0000000ec63b400
    paca    = 0xc0000000017f0000   irqmask: 0x03   irq_happened: 0x01
      pid   = 85, comm = sh
  kernel BUG at arch/powerpc/include/asm/book3s/64/pgtable.h:612!
  Linux version 5.3.0-rc1-00001-g0fe93e5f3394
  enter ? for help
  [c0000000ee0a3a00] c000000000d37378 create_physical_mapping+0x260/0x360
  [c0000000ee0a3b10] c000000000d370bc create_section_mapping+0x1c/0x3c
  [c0000000ee0a3b30] c000000000071f54 arch_add_memory+0x74/0x130

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190724084638.24982-5-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/book3s/64/pgtable.h | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/include/asm/book3s/64/pgtable.h b/arch/powerpc/include/asm/book3s/64/pgtable.h
index 855dbae6d351d..a717640b7eda4 100644
--- a/arch/powerpc/include/asm/book3s/64/pgtable.h
+++ b/arch/powerpc/include/asm/book3s/64/pgtable.h
@@ -629,8 +629,10 @@ static inline bool pte_access_permitted(pte_t pte, bool write)
  */
 static inline pte_t pfn_pte(unsigned long pfn, pgprot_t pgprot)
 {
-	return __pte((((pte_basic_t)(pfn) << PAGE_SHIFT) & PTE_RPN_MASK) |
-		     pgprot_val(pgprot));
+	VM_BUG_ON(pfn >> (64 - PAGE_SHIFT));
+	VM_BUG_ON((pfn << PAGE_SHIFT) & ~PTE_RPN_MASK);
+
+	return __pte(((pte_basic_t)pfn << PAGE_SHIFT) | pgprot_val(pgprot));
 }
 
 static inline unsigned long pte_pfn(pte_t pte)
-- 
2.20.1

[PATCH AUTOSEL 4.19 27/50] powerpc/pseries/mobility: use cond_resched when updating device tree

[Sasha Levin]

From: Nathan Lynch <nathanl@linux.ibm.com>

[ Upstream commit ccfb5bd71d3d1228090a8633800ae7cdf42a94ac ]

After a partition migration, pseries_devicetree_update() processes
changes to the device tree communicated from the platform to
Linux. This is a relatively heavyweight operation, with multiple
device tree searches, memory allocations, and conversations with
partition firmware.

There's a few levels of nested loops which are bounded only by
decisions made by the platform, outside of Linux's control, and indeed
we have seen RCU stalls on large systems while executing this call
graph. Use cond_resched() in these loops so that the cpu is yielded
when needed.

Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190802192926.19277-4-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/pseries/mobility.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/powerpc/platforms/pseries/mobility.c b/arch/powerpc/platforms/pseries/mobility.c
index 7b60fcf04dc47..e4ea713833832 100644
--- a/arch/powerpc/platforms/pseries/mobility.c
+++ b/arch/powerpc/platforms/pseries/mobility.c
@@ -12,6 +12,7 @@
 #include <linux/cpu.h>
 #include <linux/kernel.h>
 #include <linux/kobject.h>
+#include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/stat.h>
 #include <linux/completion.h>
@@ -209,7 +210,11 @@ static int update_dt_node(__be32 phandle, s32 scope)
 
 				prop_data += vd;
 			}
+
+			cond_resched();
 		}
+
+		cond_resched();
 	} while (rtas_rc == 1);
 
 	of_node_put(dn);
@@ -318,8 +323,12 @@ int pseries_devicetree_update(s32 scope)
 					add_dt_node(phandle, drc_index);
 					break;
 				}
+
+				cond_resched();
 			}
 		}
+
+		cond_resched();
 	} while (rc == 1);
 
 	kfree(rtas_buf);
-- 
2.20.1

[PATCH AUTOSEL 4.19 27/50] powerpc/pseries/mobility: use cond_resched when updating device tree

[Sasha Levin]

From: Nathan Lynch <nathanl@linux.ibm.com>

[ Upstream commit ccfb5bd71d3d1228090a8633800ae7cdf42a94ac ]

After a partition migration, pseries_devicetree_update() processes
changes to the device tree communicated from the platform to
Linux. This is a relatively heavyweight operation, with multiple
device tree searches, memory allocations, and conversations with
partition firmware.

There's a few levels of nested loops which are bounded only by
decisions made by the platform, outside of Linux's control, and indeed
we have seen RCU stalls on large systems while executing this call
graph. Use cond_resched() in these loops so that the cpu is yielded
when needed.

Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190802192926.19277-4-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/pseries/mobility.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/powerpc/platforms/pseries/mobility.c b/arch/powerpc/platforms/pseries/mobility.c
index 7b60fcf04dc47..e4ea713833832 100644
--- a/arch/powerpc/platforms/pseries/mobility.c
+++ b/arch/powerpc/platforms/pseries/mobility.c
@@ -12,6 +12,7 @@
 #include <linux/cpu.h>
 #include <linux/kernel.h>
 #include <linux/kobject.h>
+#include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/stat.h>
 #include <linux/completion.h>
@@ -209,7 +210,11 @@ static int update_dt_node(__be32 phandle, s32 scope)
 
 				prop_data += vd;
 			}
+
+			cond_resched();
 		}
+
+		cond_resched();
 	} while (rtas_rc == 1);
 
 	of_node_put(dn);
@@ -318,8 +323,12 @@ int pseries_devicetree_update(s32 scope)
 					add_dt_node(phandle, drc_index);
 					break;
 				}
+
+				cond_resched();
 			}
 		}
+
+		cond_resched();
 	} while (rc == 1);
 
 	kfree(rtas_buf);
-- 
2.20.1

[PATCH AUTOSEL 4.19 28/50] pinctrl: tegra: Fix write barrier placement in pmx_writel

[Sasha Levin]

From: Sowjanya Komatineni <skomatineni@nvidia.com>

[ Upstream commit c2cf351eba2ff6002ce8eb178452219d2521e38e ]

pmx_writel uses writel which inserts write barrier before the
register write.

This patch has fix to replace writel with writel_relaxed followed
by a readback and memory barrier to ensure write operation is
completed for successful pinctrl change.

Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Link: https://lore.kernel.org/r/1565984527-5272-2-git-send-email-skomatineni@nvidia.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/tegra/pinctrl-tegra.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/tegra/pinctrl-tegra.c b/drivers/pinctrl/tegra/pinctrl-tegra.c
index 1aba75897d147..26a3f1eb9c6bf 100644
--- a/drivers/pinctrl/tegra/pinctrl-tegra.c
+++ b/drivers/pinctrl/tegra/pinctrl-tegra.c
@@ -40,7 +40,9 @@ static inline u32 pmx_readl(struct tegra_pmx *pmx, u32 bank, u32 reg)
 
 static inline void pmx_writel(struct tegra_pmx *pmx, u32 val, u32 bank, u32 reg)
 {
-	writel(val, pmx->regs[bank] + reg);
+	writel_relaxed(val, pmx->regs[bank] + reg);
+	/* make sure pinmux register write completed */
+	pmx_readl(pmx, bank, reg);
 }
 
 static int tegra_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
-- 
2.20.1

[PATCH AUTOSEL 4.19 29/50] powerpc/eeh: Clear stale EEH_DEV_NO_HANDLER flag

[Sasha Levin]

From: Sam Bobroff <sbobroff@linux.ibm.com>

[ Upstream commit aa06e3d60e245284d1e55497eb3108828092818d ]

The EEH_DEV_NO_HANDLER flag is used by the EEH system to prevent the
use of driver callbacks in drivers that have been bound part way
through the recovery process. This is necessary to prevent later stage
handlers from being called when the earlier stage handlers haven't,
which can be confusing for drivers.

However, the flag is set for all devices that are added after boot
time and only cleared at the end of the EEH recovery process. This
results in hot plugged devices erroneously having the flag set during
the first recovery after they are added (causing their driver's
handlers to be incorrectly ignored).

To remedy this, clear the flag at the beginning of recovery
processing. The flag is still cleared at the end of recovery
processing, although it is no longer really necessary.

Also clear the flag during eeh_handle_special_event(), for the same
reasons.

Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b8ca5629d27de74c957d4f4b250177d1b6fc4bbd.1565930772.git.sbobroff@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/eeh_driver.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c
index 67619b4b3f96c..110eba400de7c 100644
--- a/arch/powerpc/kernel/eeh_driver.c
+++ b/arch/powerpc/kernel/eeh_driver.c
@@ -811,6 +811,10 @@ void eeh_handle_normal_event(struct eeh_pe *pe)
 	pr_warn("EEH: This PCI device has failed %d times in the last hour and will be permanently disabled after %d failures.\n",
 		pe->freeze_count, eeh_max_freezes);
 
+	eeh_for_each_pe(pe, tmp_pe)
+		eeh_pe_for_each_dev(tmp_pe, edev, tmp)
+			edev->mode &= ~EEH_DEV_NO_HANDLER;
+
 	/* Walk the various device drivers attached to this slot through
 	 * a reset sequence, giving each an opportunity to do what it needs
 	 * to accomplish the reset.  Each child gets a report of the
@@ -1004,7 +1008,8 @@ void eeh_handle_normal_event(struct eeh_pe *pe)
  */
 void eeh_handle_special_event(void)
 {
-	struct eeh_pe *pe, *phb_pe;
+	struct eeh_pe *pe, *phb_pe, *tmp_pe;
+	struct eeh_dev *edev, *tmp_edev;
 	struct pci_bus *bus;
 	struct pci_controller *hose;
 	unsigned long flags;
@@ -1075,6 +1080,10 @@ void eeh_handle_special_event(void)
 				    (phb_pe->state & EEH_PE_RECOVERING))
 					continue;
 
+				eeh_for_each_pe(pe, tmp_pe)
+					eeh_pe_for_each_dev(tmp_pe, edev, tmp_edev)
+						edev->mode &= ~EEH_DEV_NO_HANDLER;
+
 				/* Notify all devices to be down */
 				eeh_pe_state_clear(pe, EEH_PE_PRI_BUS);
 				eeh_set_channel_state(pe, pci_channel_io_perm_failure);
-- 
2.20.1

[PATCH AUTOSEL 4.19 29/50] powerpc/eeh: Clear stale EEH_DEV_NO_HANDLER flag

[Sasha Levin]

From: Sam Bobroff <sbobroff@linux.ibm.com>

[ Upstream commit aa06e3d60e245284d1e55497eb3108828092818d ]

The EEH_DEV_NO_HANDLER flag is used by the EEH system to prevent the
use of driver callbacks in drivers that have been bound part way
through the recovery process. This is necessary to prevent later stage
handlers from being called when the earlier stage handlers haven't,
which can be confusing for drivers.

However, the flag is set for all devices that are added after boot
time and only cleared at the end of the EEH recovery process. This
results in hot plugged devices erroneously having the flag set during
the first recovery after they are added (causing their driver's
handlers to be incorrectly ignored).

To remedy this, clear the flag at the beginning of recovery
processing. The flag is still cleared at the end of recovery
processing, although it is no longer really necessary.

Also clear the flag during eeh_handle_special_event(), for the same
reasons.

Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b8ca5629d27de74c957d4f4b250177d1b6fc4bbd.1565930772.git.sbobroff@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/eeh_driver.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c
index 67619b4b3f96c..110eba400de7c 100644
--- a/arch/powerpc/kernel/eeh_driver.c
+++ b/arch/powerpc/kernel/eeh_driver.c
@@ -811,6 +811,10 @@ void eeh_handle_normal_event(struct eeh_pe *pe)
 	pr_warn("EEH: This PCI device has failed %d times in the last hour and will be permanently disabled after %d failures.\n",
 		pe->freeze_count, eeh_max_freezes);
 
+	eeh_for_each_pe(pe, tmp_pe)
+		eeh_pe_for_each_dev(tmp_pe, edev, tmp)
+			edev->mode &= ~EEH_DEV_NO_HANDLER;
+
 	/* Walk the various device drivers attached to this slot through
 	 * a reset sequence, giving each an opportunity to do what it needs
 	 * to accomplish the reset.  Each child gets a report of the
@@ -1004,7 +1008,8 @@ void eeh_handle_normal_event(struct eeh_pe *pe)
  */
 void eeh_handle_special_event(void)
 {
-	struct eeh_pe *pe, *phb_pe;
+	struct eeh_pe *pe, *phb_pe, *tmp_pe;
+	struct eeh_dev *edev, *tmp_edev;
 	struct pci_bus *bus;
 	struct pci_controller *hose;
 	unsigned long flags;
@@ -1075,6 +1080,10 @@ void eeh_handle_special_event(void)
 				    (phb_pe->state & EEH_PE_RECOVERING))
 					continue;
 
+				eeh_for_each_pe(pe, tmp_pe)
+					eeh_pe_for_each_dev(tmp_pe, edev, tmp_edev)
+						edev->mode &= ~EEH_DEV_NO_HANDLER;
+
 				/* Notify all devices to be down */
 				eeh_pe_state_clear(pe, EEH_PE_PRI_BUS);
 				eeh_set_channel_state(pe, pci_channel_io_perm_failure);
-- 
2.20.1

[PATCH AUTOSEL 4.19 30/50] vfio_pci: Restore original state on release

[Sasha Levin]

From: hexin <hexin.op@gmail.com>

[ Upstream commit 92c8026854c25093946e0d7fe536fd9eac440f06 ]

vfio_pci_enable() saves the device's initial configuration information
with the intent that it is restored in vfio_pci_disable().  However,
the commit referenced in Fixes: below replaced the call to
__pci_reset_function_locked(), which is not wrapped in a state save
and restore, with pci_try_reset_function(), which overwrites the
restored device state with the current state before applying it to the
device.  Reinstate use of __pci_reset_function_locked() to return to
the desired behavior.

Fixes: 890ed578df82 ("vfio-pci: Use pci "try" reset interface")
Signed-off-by: hexin <hexin15@baidu.com>
Signed-off-by: Liu Qi <liuqi16@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vfio/pci/vfio_pci.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
index 6cf00d9f512b7..a92c2868d9021 100644
--- a/drivers/vfio/pci/vfio_pci.c
+++ b/drivers/vfio/pci/vfio_pci.c
@@ -373,11 +373,20 @@ static void vfio_pci_disable(struct vfio_pci_device *vdev)
 	pci_write_config_word(pdev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE);
 
 	/*
-	 * Try to reset the device.  The success of this is dependent on
-	 * being able to lock the device, which is not always possible.
+	 * Try to get the locks ourselves to prevent a deadlock. The
+	 * success of this is dependent on being able to lock the device,
+	 * which is not always possible.
+	 * We can not use the "try" reset interface here, which will
+	 * overwrite the previously restored configuration information.
 	 */
-	if (vdev->reset_works && !pci_try_reset_function(pdev))
-		vdev->needs_reset = false;
+	if (vdev->reset_works && pci_cfg_access_trylock(pdev)) {
+		if (device_trylock(&pdev->dev)) {
+			if (!__pci_reset_function_locked(pdev))
+				vdev->needs_reset = false;
+			device_unlock(&pdev->dev);
+		}
+		pci_cfg_access_unlock(pdev);
+	}
 
 	pci_restore_state(pdev);
 out:
-- 
2.20.1

[PATCH AUTOSEL 4.19 31/50] drm/nouveau/volt: Fix for some cards having 0 maximum voltage

[Sasha Levin]

From: Mark Menzynski <mmenzyns@redhat.com>

[ Upstream commit a1af2afbd244089560794c260b2d4326a86e39b6 ]

Some, mostly Fermi, vbioses appear to have zero max voltage. That causes Nouveau to not parse voltage entries, thus users not being able to set higher clocks.

When changing this value Nvidia driver still appeared to ignore it, and I wasn't able to find out why, thus the code is ignoring the value if it is zero.

CC: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Mark Menzynski <mmenzyns@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/nouveau/nvkm/subdev/bios/volt.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/bios/volt.c b/drivers/gpu/drm/nouveau/nvkm/subdev/bios/volt.c
index 7143ea4611aa3..33a9fb5ac5585 100644
--- a/drivers/gpu/drm/nouveau/nvkm/subdev/bios/volt.c
+++ b/drivers/gpu/drm/nouveau/nvkm/subdev/bios/volt.c
@@ -96,6 +96,8 @@ nvbios_volt_parse(struct nvkm_bios *bios, u8 *ver, u8 *hdr, u8 *cnt, u8 *len,
 		info->min     = min(info->base,
 				    info->base + info->step * info->vidmask);
 		info->max     = nvbios_rd32(bios, volt + 0x0e);
+		if (!info->max)
+			info->max = max(info->base, info->base + info->step * info->vidmask);
 		break;
 	case 0x50:
 		info->min     = nvbios_rd32(bios, volt + 0x0a);
-- 
2.20.1

[PATCH AUTOSEL 4.19 32/50] pinctrl: amd: disable spurious-firing GPIO IRQs

[Sasha Levin]

From: Daniel Drake <drake@endlessm.com>

[ Upstream commit d21b8adbd475dba19ac2086d3306327b4a297418 ]

When cold-booting Asus X434DA, GPIO 7 is found to be already configured
as an interrupt, and the GPIO level is found to be in a state that
causes the interrupt to fire.

As soon as pinctrl-amd probes, this interrupt fires and invokes
amd_gpio_irq_handler(). The IRQ is acked, but no GPIO-IRQ handler was
invoked, so the GPIO level being unchanged just causes another interrupt
to fire again immediately after.

This results in an interrupt storm causing this platform to hang
during boot, right after pinctrl-amd is probed.

Detect this situation and disable the GPIO interrupt when this happens.
This enables the affected platform to boot as normal. GPIO 7 actually is
the I2C touchpad interrupt line, and later on, i2c-multitouch loads and
re-enables this interrupt when it is ready to handle it.

Instead of this approach, I considered disabling all GPIO interrupts at
probe time, however that seems a little risky, and I also confirmed that
Windows does not seem to have this behaviour: the same 41 GPIO IRQs are
enabled under both Linux and Windows, which is a far larger collection
than the GPIOs referenced by the DSDT on this platform.

Signed-off-by: Daniel Drake <drake@endlessm.com>
Link: https://lore.kernel.org/r/20190814090540.7152-1-drake@endlessm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/pinctrl-amd.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c
index 1425c2874d402..cd7a5d95b499a 100644
--- a/drivers/pinctrl/pinctrl-amd.c
+++ b/drivers/pinctrl/pinctrl-amd.c
@@ -569,15 +569,25 @@ static irqreturn_t amd_gpio_irq_handler(int irq, void *dev_id)
 			    !(regval & BIT(INTERRUPT_MASK_OFF)))
 				continue;
 			irq = irq_find_mapping(gc->irq.domain, irqnr + i);
-			generic_handle_irq(irq);
+			if (irq != 0)
+				generic_handle_irq(irq);
 
 			/* Clear interrupt.
 			 * We must read the pin register again, in case the
 			 * value was changed while executing
 			 * generic_handle_irq() above.
+			 * If we didn't find a mapping for the interrupt,
+			 * disable it in order to avoid a system hang caused
+			 * by an interrupt storm.
 			 */
 			raw_spin_lock_irqsave(&gpio_dev->lock, flags);
 			regval = readl(regs + i);
+			if (irq == 0) {
+				regval &= ~BIT(INTERRUPT_ENABLE_OFF);
+				dev_dbg(&gpio_dev->pdev->dev,
+					"Disabling spurious GPIO IRQ %d\n",
+					irqnr + i);
+			}
 			writel(regval, regs + i);
 			raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
 			ret = IRQ_HANDLED;
-- 
2.20.1

[PATCH AUTOSEL 4.19 33/50] clk: renesas: mstp: Set GENPD_FLAG_ALWAYS_ON for clock domain

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit a459a184c978ca9ad538aab93aafdde873953f30 ]

The CPG/MSTP Clock Domain driver does not implement the
generic_pm_domain.power_{on,off}() callbacks, as the domain itself
cannot be powered down.  Hence the domain should be marked as always-on
by setting the GENPD_FLAG_ALWAYS_ON flag, to prevent the core PM Domain
code from considering it for power-off, and doing unnessary processing.

This also gets rid of a boot warning when the Clock Domain contains an
IRQ-safe device, e.g. on RZ/A1:

    sh_mtu2 fcff0000.timer: PM domain cpg_clocks will not be powered off

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/renesas/clk-mstp.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/renesas/clk-mstp.c b/drivers/clk/renesas/clk-mstp.c
index e82adcb16a52a..45d94fb9703d2 100644
--- a/drivers/clk/renesas/clk-mstp.c
+++ b/drivers/clk/renesas/clk-mstp.c
@@ -341,7 +341,8 @@ void __init cpg_mstp_add_clk_domain(struct device_node *np)
 		return;
 
 	pd->name = np->name;
-	pd->flags = GENPD_FLAG_PM_CLK | GENPD_FLAG_ACTIVE_WAKEUP;
+	pd->flags = GENPD_FLAG_PM_CLK | GENPD_FLAG_ALWAYS_ON |
+		    GENPD_FLAG_ACTIVE_WAKEUP;
 	pd->attach_dev = cpg_mstp_attach_dev;
 	pd->detach_dev = cpg_mstp_detach_dev;
 	pm_genpd_init(pd, &pm_domain_always_on_gov, false);
-- 
2.20.1

[PATCH AUTOSEL 4.19 34/50] clk: renesas: cpg-mssr: Set GENPD_FLAG_ALWAYS_ON for clock domain

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit f787216f33ce5b5a2567766398f44ab62157114c ]

The CPG/MSSR Clock Domain driver does not implement the
generic_pm_domain.power_{on,off}() callbacks, as the domain itself
cannot be powered down.  Hence the domain should be marked as always-on
by setting the GENPD_FLAG_ALWAYS_ON flag, to prevent the core PM Domain
code from considering it for power-off, and doing unnessary processing.

Note that this only affects RZ/A2 SoCs.  On R-Car Gen2 and Gen3 SoCs,
the R-Car SYSC driver handles Clock Domain creation, and offloads only
device attachment/detachment to the CPG/MSSR driver.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/renesas/renesas-cpg-mssr.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/renesas/renesas-cpg-mssr.c b/drivers/clk/renesas/renesas-cpg-mssr.c
index 24485bee9b49e..d7a2ad6173694 100644
--- a/drivers/clk/renesas/renesas-cpg-mssr.c
+++ b/drivers/clk/renesas/renesas-cpg-mssr.c
@@ -514,7 +514,8 @@ static int __init cpg_mssr_add_clk_domain(struct device *dev,
 
 	genpd = &pd->genpd;
 	genpd->name = np->name;
-	genpd->flags = GENPD_FLAG_PM_CLK | GENPD_FLAG_ACTIVE_WAKEUP;
+	genpd->flags = GENPD_FLAG_PM_CLK | GENPD_FLAG_ALWAYS_ON |
+		       GENPD_FLAG_ACTIVE_WAKEUP;
 	genpd->attach_dev = cpg_mssr_attach_dev;
 	genpd->detach_dev = cpg_mssr_detach_dev;
 	pm_genpd_init(genpd, &pm_domain_always_on_gov, false);
-- 
2.20.1

[PATCH AUTOSEL 4.19 35/50] drm/amd/display: support spdif

[Sasha Levin]

From: Charlene Liu <charlene.liu@amd.com>

[ Upstream commit b5a41620bb88efb9fb31a4fa5e652e3d5bead7d4 ]

[Description]
port spdif fix to staging:
 spdif hardwired to afmt inst 1.
 spdif func pointer
 spdif resource allocation (reserve last audio endpoint for spdif only)

Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/display/dc/core/dc_resource.c   | 17 ++++++++---------
 drivers/gpu/drm/amd/display/dc/dce/dce_audio.c  |  4 ++--
 2 files changed, 10 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
index f0d68aa7c8fcc..d440b28ee43fb 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c
@@ -229,12 +229,10 @@ bool resource_construct(
 				DC_ERR("DC: failed to create audio!\n");
 				return false;
 			}
-
 			if (!aud->funcs->endpoint_valid(aud)) {
 				aud->funcs->destroy(&aud);
 				break;
 			}
-
 			pool->audios[i] = aud;
 			pool->audio_count++;
 		}
@@ -1703,24 +1701,25 @@ static struct audio *find_first_free_audio(
 		const struct resource_pool *pool,
 		enum engine_id id)
 {
-	int i;
-	for (i = 0; i < pool->audio_count; i++) {
+	int i, available_audio_count;
+
+	available_audio_count = pool->audio_count;
+
+	for (i = 0; i < available_audio_count; i++) {
 		if ((res_ctx->is_audio_acquired[i] == false) && (res_ctx->is_stream_enc_acquired[i] == true)) {
 			/*we have enough audio endpoint, find the matching inst*/
 			if (id != i)
 				continue;
-
 			return pool->audios[i];
 		}
 	}
 
-    /* use engine id to find free audio */
-	if ((id < pool->audio_count) && (res_ctx->is_audio_acquired[id] == false)) {
+	/* use engine id to find free audio */
+	if ((id < available_audio_count) && (res_ctx->is_audio_acquired[id] == false)) {
 		return pool->audios[id];
 	}
-
 	/*not found the matching one, first come first serve*/
-	for (i = 0; i < pool->audio_count; i++) {
+	for (i = 0; i < available_audio_count; i++) {
 		if (res_ctx->is_audio_acquired[i] == false) {
 			return pool->audios[i];
 		}
diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_audio.c b/drivers/gpu/drm/amd/display/dc/dce/dce_audio.c
index 7f6d724686f1a..abb559ce64085 100644
--- a/drivers/gpu/drm/amd/display/dc/dce/dce_audio.c
+++ b/drivers/gpu/drm/amd/display/dc/dce/dce_audio.c
@@ -611,6 +611,8 @@ void dce_aud_az_configure(
 
 	AZ_REG_WRITE(AZALIA_F0_CODEC_PIN_CONTROL_SINK_INFO1,
 		value);
+	DC_LOG_HW_AUDIO("\n\tAUDIO:az_configure: index: %u data, 0x%x, displayName %s: \n",
+		audio->inst, value, audio_info->display_name);
 
 	/*
 	*write the port ID:
@@ -922,7 +924,6 @@ static const struct audio_funcs funcs = {
 	.az_configure = dce_aud_az_configure,
 	.destroy = dce_aud_destroy,
 };
-
 void dce_aud_destroy(struct audio **audio)
 {
 	struct dce_audio *aud = DCE_AUD(*audio);
@@ -953,7 +954,6 @@ struct audio *dce_audio_create(
 	audio->regs = reg;
 	audio->shifts = shifts;
 	audio->masks = masks;
-
 	return &audio->base;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 36/50] drm/amdgpu/si: fix ASIC tests

[Sasha Levin]

From: Jean Delvare <jdelvare@suse.de>

[ Upstream commit 77efe48a729588527afb4d5811b9e0acb29f5e51 ]

Comparing adev->family with CHIP constants is not correct.
adev->family can only be compared with AMDGPU_FAMILY constants and
adev->asic_type is the struct member to compare with CHIP constants.
They are separate identification spaces.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 62a37553414a ("drm/amdgpu: add si implementation v10")
Cc: Ken Wang <Qingqing.Wang@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/si.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/si.c b/drivers/gpu/drm/amd/amdgpu/si.c
index c364ef94cc366..77c9f4d8668ad 100644
--- a/drivers/gpu/drm/amd/amdgpu/si.c
+++ b/drivers/gpu/drm/amd/amdgpu/si.c
@@ -1813,7 +1813,7 @@ static void si_program_aspm(struct amdgpu_device *adev)
 			if (orig != data)
 				si_pif_phy1_wreg(adev,PB1_PIF_PWRDOWN_1, data);
 
-			if ((adev->family != CHIP_OLAND) && (adev->family != CHIP_HAINAN)) {
+			if ((adev->asic_type != CHIP_OLAND) && (adev->asic_type != CHIP_HAINAN)) {
 				orig = data = si_pif_phy0_rreg(adev,PB0_PIF_PWRDOWN_0);
 				data &= ~PLL_RAMP_UP_TIME_0_MASK;
 				if (orig != data)
@@ -1862,14 +1862,14 @@ static void si_program_aspm(struct amdgpu_device *adev)
 
 			orig = data = si_pif_phy0_rreg(adev,PB0_PIF_CNTL);
 			data &= ~LS2_EXIT_TIME_MASK;
-			if ((adev->family == CHIP_OLAND) || (adev->family == CHIP_HAINAN))
+			if ((adev->asic_type == CHIP_OLAND) || (adev->asic_type == CHIP_HAINAN))
 				data |= LS2_EXIT_TIME(5);
 			if (orig != data)
 				si_pif_phy0_wreg(adev,PB0_PIF_CNTL, data);
 
 			orig = data = si_pif_phy1_rreg(adev,PB1_PIF_CNTL);
 			data &= ~LS2_EXIT_TIME_MASK;
-			if ((adev->family == CHIP_OLAND) || (adev->family == CHIP_HAINAN))
+			if ((adev->asic_type == CHIP_OLAND) || (adev->asic_type == CHIP_HAINAN))
 				data |= LS2_EXIT_TIME(5);
 			if (orig != data)
 				si_pif_phy1_wreg(adev,PB1_PIF_CNTL, data);
-- 
2.20.1

[PATCH AUTOSEL 4.19 36/50] drm/amdgpu/si: fix ASIC tests

[Sasha Levin]

From: Jean Delvare <jdelvare@suse.de>

[ Upstream commit 77efe48a729588527afb4d5811b9e0acb29f5e51 ]

Comparing adev->family with CHIP constants is not correct.
adev->family can only be compared with AMDGPU_FAMILY constants and
adev->asic_type is the struct member to compare with CHIP constants.
They are separate identification spaces.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 62a37553414a ("drm/amdgpu: add si implementation v10")
Cc: Ken Wang <Qingqing.Wang@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/si.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/si.c b/drivers/gpu/drm/amd/amdgpu/si.c
index c364ef94cc366..77c9f4d8668ad 100644
--- a/drivers/gpu/drm/amd/amdgpu/si.c
+++ b/drivers/gpu/drm/amd/amdgpu/si.c
@@ -1813,7 +1813,7 @@ static void si_program_aspm(struct amdgpu_device *adev)
 			if (orig != data)
 				si_pif_phy1_wreg(adev,PB1_PIF_PWRDOWN_1, data);
 
-			if ((adev->family != CHIP_OLAND) && (adev->family != CHIP_HAINAN)) {
+			if ((adev->asic_type != CHIP_OLAND) && (adev->asic_type != CHIP_HAINAN)) {
 				orig = data = si_pif_phy0_rreg(adev,PB0_PIF_PWRDOWN_0);
 				data &= ~PLL_RAMP_UP_TIME_0_MASK;
 				if (orig != data)
@@ -1862,14 +1862,14 @@ static void si_program_aspm(struct amdgpu_device *adev)
 
 			orig = data = si_pif_phy0_rreg(adev,PB0_PIF_CNTL);
 			data &= ~LS2_EXIT_TIME_MASK;
-			if ((adev->family == CHIP_OLAND) || (adev->family == CHIP_HAINAN))
+			if ((adev->asic_type == CHIP_OLAND) || (adev->asic_type == CHIP_HAINAN))
 				data |= LS2_EXIT_TIME(5);
 			if (orig != data)
 				si_pif_phy0_wreg(adev,PB0_PIF_CNTL, data);
 
 			orig = data = si_pif_phy1_rreg(adev,PB1_PIF_CNTL);
 			data &= ~LS2_EXIT_TIME_MASK;
-			if ((adev->family == CHIP_OLAND) || (adev->family == CHIP_HAINAN))
+			if ((adev->asic_type == CHIP_OLAND) || (adev->asic_type == CHIP_HAINAN))
 				data |= LS2_EXIT_TIME(5);
 			if (orig != data)
 				si_pif_phy1_wreg(adev,PB1_PIF_CNTL, data);
-- 
2.20.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 4.19 37/50] powerpc/64s/exception: machine check use correct cfar for late handler

[Sasha Levin]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit 0b66370c61fcf5fcc1d6901013e110284da6e2bb ]

Bare metal machine checks run an "early" handler in real mode before
running the main handler which reports the event.

The main handler runs exactly as a normal interrupt handler, after the
"windup" which sets registers back as they were at interrupt entry.
CFAR does not get restored by the windup code, so that will be wrong
when the handler is run.

Restore the CFAR to the saved value before running the late handler.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190802105709.27696-8-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/exceptions-64s.S | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 06cc77813dbb7..90af86f143a91 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -520,6 +520,10 @@ EXC_COMMON_BEGIN(machine_check_handle_early)
 	RFI_TO_USER_OR_KERNEL
 9:
 	/* Deliver the machine check to host kernel in V mode. */
+BEGIN_FTR_SECTION
+	ld	r10,ORIG_GPR3(r1)
+	mtspr	SPRN_CFAR,r10
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
 	MACHINE_CHECK_HANDLER_WINDUP
 	b	machine_check_pSeries
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 37/50] powerpc/64s/exception: machine check use correct cfar for late handler

[Sasha Levin]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit 0b66370c61fcf5fcc1d6901013e110284da6e2bb ]

Bare metal machine checks run an "early" handler in real mode before
running the main handler which reports the event.

The main handler runs exactly as a normal interrupt handler, after the
"windup" which sets registers back as they were at interrupt entry.
CFAR does not get restored by the windup code, so that will be wrong
when the handler is run.

Restore the CFAR to the saved value before running the late handler.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190802105709.27696-8-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/exceptions-64s.S | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 06cc77813dbb7..90af86f143a91 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -520,6 +520,10 @@ EXC_COMMON_BEGIN(machine_check_handle_early)
 	RFI_TO_USER_OR_KERNEL
 9:
 	/* Deliver the machine check to host kernel in V mode. */
+BEGIN_FTR_SECTION
+	ld	r10,ORIG_GPR3(r1)
+	mtspr	SPRN_CFAR,r10
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
 	MACHINE_CHECK_HANDLER_WINDUP
 	b	machine_check_pSeries
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 38/50] pstore: fs superblock limits

[Sasha Levin]

From: Deepa Dinamani <deepa.kernel@gmail.com>

[ Upstream commit 83b8a3fbe3aa82ac3c253b698ae6a9be2dbdd5e0 ]

Leaving granularity at 1ns because it is dependent on the specific
attached backing pstore module. ramoops has microsecond resolution.

Fix the readback of ramoops fractional timestamp microseconds,
which has incorrectly been reporting the value as nanoseconds.

Fixes: 3f8f80f0cfeb ("pstore/ram: Read and write to the 'compressed' flag of pstore").

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Jeff Layton <jlayton@kernel.org>
Cc: anton@enomsg.org
Cc: ccross@android.com
Cc: keescook@chromium.org
Cc: tony.luck@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/pstore/ram.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/fs/pstore/ram.c b/fs/pstore/ram.c
index 316c16463b20f..015d74ee31a03 100644
--- a/fs/pstore/ram.c
+++ b/fs/pstore/ram.c
@@ -162,6 +162,7 @@ static int ramoops_read_kmsg_hdr(char *buffer, struct timespec64 *time,
 	if (sscanf(buffer, RAMOOPS_KERNMSG_HDR "%lld.%lu-%c\n%n",
 		   (time64_t *)&time->tv_sec, &time->tv_nsec, &data_type,
 		   &header_length) == 3) {
+		time->tv_nsec *= 1000;
 		if (data_type == 'C')
 			*compressed = true;
 		else
@@ -169,6 +170,7 @@ static int ramoops_read_kmsg_hdr(char *buffer, struct timespec64 *time,
 	} else if (sscanf(buffer, RAMOOPS_KERNMSG_HDR "%lld.%lu\n%n",
 			  (time64_t *)&time->tv_sec, &time->tv_nsec,
 			  &header_length) == 2) {
+		time->tv_nsec *= 1000;
 		*compressed = false;
 	} else {
 		time->tv_sec = 0;
-- 
2.20.1

[PATCH AUTOSEL 4.19 39/50] powerpc/imc: Dont create debugfs files for cpu-less nodes

[Sasha Levin]

From: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>

[ Upstream commit 41ba17f20ea835c489e77bd54e2da73184e22060 ]

Commit <684d984038aa> ('powerpc/powernv: Add debugfs interface for
imc-mode and imc') added debugfs interface for the nest imc pmu
devices to support changing of different ucode modes. Primarily adding
this capability for debug. But when doing so, the code did not
consider the case of cpu-less nodes. So when reading the _cmd_ or
_mode_ file of a cpu-less node will create this crash.

  Faulting instruction address: 0xc0000000000d0d58
  Oops: Kernel access of bad area, sig: 11 [#1]
  ...
  CPU: 67 PID: 5301 Comm: cat Not tainted 5.2.0-rc6-next-20190627+ #19
  NIP:  c0000000000d0d58 LR: c00000000049aa18 CTR:c0000000000d0d50
  REGS: c00020194548f9e0 TRAP: 0300   Not tainted  (5.2.0-rc6-next-20190627+)
  MSR:  9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE>  CR:28022822  XER: 00000000
  CFAR: c00000000049aa14 DAR: 000000000003fc08 DSISR:40000000 IRQMASK: 0
  ...
  NIP imc_mem_get+0x8/0x20
  LR  simple_attr_read+0x118/0x170
  Call Trace:
    simple_attr_read+0x70/0x170 (unreliable)
    debugfs_attr_read+0x6c/0xb0
    __vfs_read+0x3c/0x70
     vfs_read+0xbc/0x1a0
    ksys_read+0x7c/0x140
    system_call+0x5c/0x70

Patch fixes the issue with a more robust check for vbase to NULL.

Before patch, ls output for the debugfs imc directory

  # ls /sys/kernel/debug/powerpc/imc/
  imc_cmd_0    imc_cmd_251  imc_cmd_253  imc_cmd_255  imc_mode_0    imc_mode_251  imc_mode_253  imc_mode_255
  imc_cmd_250  imc_cmd_252  imc_cmd_254  imc_cmd_8    imc_mode_250  imc_mode_252  imc_mode_254  imc_mode_8

After patch, ls output for the debugfs imc directory

  # ls /sys/kernel/debug/powerpc/imc/
  imc_cmd_0  imc_cmd_8  imc_mode_0  imc_mode_8

Actual bug here is that, we have two loops with potentially different
loop counts. That is, in imc_get_mem_addr_nest(), loop count is
obtained from the dt entries. But in case of export_imc_mode_and_cmd(),
loop was based on for_each_nid() count. Patch fixes the loop count in
latter based on the struct mem_info. Ideally it would be better to
have array size in struct imc_pmu.

Fixes: 684d984038aa ('powerpc/powernv: Add debugfs interface for imc-mode and imc')
Reported-by: Qian Cai <cai@lca.pw>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190827101635.6942-1-maddy@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/powernv/opal-imc.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/opal-imc.c b/arch/powerpc/platforms/powernv/opal-imc.c
index 828f6656f8f74..649fb268f4461 100644
--- a/arch/powerpc/platforms/powernv/opal-imc.c
+++ b/arch/powerpc/platforms/powernv/opal-imc.c
@@ -57,9 +57,9 @@ static void export_imc_mode_and_cmd(struct device_node *node,
 				    struct imc_pmu *pmu_ptr)
 {
 	static u64 loc, *imc_mode_addr, *imc_cmd_addr;
-	int chip = 0, nid;
 	char mode[16], cmd[16];
 	u32 cb_offset;
+	struct imc_mem_info *ptr = pmu_ptr->mem_info;
 
 	imc_debugfs_parent = debugfs_create_dir("imc", powerpc_debugfs_root);
 
@@ -73,20 +73,20 @@ static void export_imc_mode_and_cmd(struct device_node *node,
 	if (of_property_read_u32(node, "cb_offset", &cb_offset))
 		cb_offset = IMC_CNTL_BLK_OFFSET;
 
-	for_each_node(nid) {
-		loc = (u64)(pmu_ptr->mem_info[chip].vbase) + cb_offset;
+	while (ptr->vbase != NULL) {
+		loc = (u64)(ptr->vbase) + cb_offset;
 		imc_mode_addr = (u64 *)(loc + IMC_CNTL_BLK_MODE_OFFSET);
-		sprintf(mode, "imc_mode_%d", nid);
+		sprintf(mode, "imc_mode_%d", (u32)(ptr->id));
 		if (!imc_debugfs_create_x64(mode, 0600, imc_debugfs_parent,
 					    imc_mode_addr))
 			goto err;
 
 		imc_cmd_addr = (u64 *)(loc + IMC_CNTL_BLK_CMD_OFFSET);
-		sprintf(cmd, "imc_cmd_%d", nid);
+		sprintf(cmd, "imc_cmd_%d", (u32)(ptr->id));
 		if (!imc_debugfs_create_x64(cmd, 0600, imc_debugfs_parent,
 					    imc_cmd_addr))
 			goto err;
-		chip++;
+		ptr++;
 	}
 	return;
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 39/50] powerpc/imc: Dont create debugfs files for cpu-less nodes

[Sasha Levin]

From: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>

[ Upstream commit 41ba17f20ea835c489e77bd54e2da73184e22060 ]

Commit <684d984038aa> ('powerpc/powernv: Add debugfs interface for
imc-mode and imc') added debugfs interface for the nest imc pmu
devices to support changing of different ucode modes. Primarily adding
this capability for debug. But when doing so, the code did not
consider the case of cpu-less nodes. So when reading the _cmd_ or
_mode_ file of a cpu-less node will create this crash.

  Faulting instruction address: 0xc0000000000d0d58
  Oops: Kernel access of bad area, sig: 11 [#1]
  ...
  CPU: 67 PID: 5301 Comm: cat Not tainted 5.2.0-rc6-next-20190627+ #19
  NIP:  c0000000000d0d58 LR: c00000000049aa18 CTR:c0000000000d0d50
  REGS: c00020194548f9e0 TRAP: 0300   Not tainted  (5.2.0-rc6-next-20190627+)
  MSR:  9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE>  CR:28022822  XER: 00000000
  CFAR: c00000000049aa14 DAR: 000000000003fc08 DSISR:40000000 IRQMASK: 0
  ...
  NIP imc_mem_get+0x8/0x20
  LR  simple_attr_read+0x118/0x170
  Call Trace:
    simple_attr_read+0x70/0x170 (unreliable)
    debugfs_attr_read+0x6c/0xb0
    __vfs_read+0x3c/0x70
     vfs_read+0xbc/0x1a0
    ksys_read+0x7c/0x140
    system_call+0x5c/0x70

Patch fixes the issue with a more robust check for vbase to NULL.

Before patch, ls output for the debugfs imc directory

  # ls /sys/kernel/debug/powerpc/imc/
  imc_cmd_0    imc_cmd_251  imc_cmd_253  imc_cmd_255  imc_mode_0    imc_mode_251  imc_mode_253  imc_mode_255
  imc_cmd_250  imc_cmd_252  imc_cmd_254  imc_cmd_8    imc_mode_250  imc_mode_252  imc_mode_254  imc_mode_8

After patch, ls output for the debugfs imc directory

  # ls /sys/kernel/debug/powerpc/imc/
  imc_cmd_0  imc_cmd_8  imc_mode_0  imc_mode_8

Actual bug here is that, we have two loops with potentially different
loop counts. That is, in imc_get_mem_addr_nest(), loop count is
obtained from the dt entries. But in case of export_imc_mode_and_cmd(),
loop was based on for_each_nid() count. Patch fixes the loop count in
latter based on the struct mem_info. Ideally it would be better to
have array size in struct imc_pmu.

Fixes: 684d984038aa ('powerpc/powernv: Add debugfs interface for imc-mode and imc')
Reported-by: Qian Cai <cai@lca.pw>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190827101635.6942-1-maddy@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/powernv/opal-imc.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/platforms/powernv/opal-imc.c b/arch/powerpc/platforms/powernv/opal-imc.c
index 828f6656f8f74..649fb268f4461 100644
--- a/arch/powerpc/platforms/powernv/opal-imc.c
+++ b/arch/powerpc/platforms/powernv/opal-imc.c
@@ -57,9 +57,9 @@ static void export_imc_mode_and_cmd(struct device_node *node,
 				    struct imc_pmu *pmu_ptr)
 {
 	static u64 loc, *imc_mode_addr, *imc_cmd_addr;
-	int chip = 0, nid;
 	char mode[16], cmd[16];
 	u32 cb_offset;
+	struct imc_mem_info *ptr = pmu_ptr->mem_info;
 
 	imc_debugfs_parent = debugfs_create_dir("imc", powerpc_debugfs_root);
 
@@ -73,20 +73,20 @@ static void export_imc_mode_and_cmd(struct device_node *node,
 	if (of_property_read_u32(node, "cb_offset", &cb_offset))
 		cb_offset = IMC_CNTL_BLK_OFFSET;
 
-	for_each_node(nid) {
-		loc = (u64)(pmu_ptr->mem_info[chip].vbase) + cb_offset;
+	while (ptr->vbase != NULL) {
+		loc = (u64)(ptr->vbase) + cb_offset;
 		imc_mode_addr = (u64 *)(loc + IMC_CNTL_BLK_MODE_OFFSET);
-		sprintf(mode, "imc_mode_%d", nid);
+		sprintf(mode, "imc_mode_%d", (u32)(ptr->id));
 		if (!imc_debugfs_create_x64(mode, 0600, imc_debugfs_parent,
 					    imc_mode_addr))
 			goto err;
 
 		imc_cmd_addr = (u64 *)(loc + IMC_CNTL_BLK_CMD_OFFSET);
-		sprintf(cmd, "imc_cmd_%d", nid);
+		sprintf(cmd, "imc_cmd_%d", (u32)(ptr->id));
 		if (!imc_debugfs_create_x64(cmd, 0600, imc_debugfs_parent,
 					    imc_cmd_addr))
 			goto err;
-		chip++;
+		ptr++;
 	}
 	return;
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 40/50] clk: qcom: gcc-sdm845: Use floor ops for sdcc clks

[Sasha Levin]

From: Stephen Boyd <swboyd@chromium.org>

[ Upstream commit 5e4b7e82d497580bc430576c4c9bce157dd72512 ]

Some MMC cards fail to enumerate properly when inserted into an MMC slot
on sdm845 devices. This is because the clk ops for qcom clks round the
frequency up to the nearest rate instead of down to the nearest rate.
For example, the MMC driver requests a frequency of 52MHz from
clk_set_rate() but the qcom implementation for these clks rounds 52MHz
up to the next supported frequency of 100MHz. The MMC driver could be
modified to request clk rate ranges but for now we can fix this in the
clk driver by changing the rounding policy for this clk to be round down
instead of round up.

Fixes: 06391eddb60a ("clk: qcom: Add Global Clock controller (GCC) driver for SDM845")
Reported-by: Douglas Anderson <dianders@chromium.org>
Cc: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lkml.kernel.org/r/20190830195142.103564-1-swboyd@chromium.org
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/qcom/gcc-sdm845.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/qcom/gcc-sdm845.c b/drivers/clk/qcom/gcc-sdm845.c
index 3bf11a6200942..ada3e4aeb38f9 100644
--- a/drivers/clk/qcom/gcc-sdm845.c
+++ b/drivers/clk/qcom/gcc-sdm845.c
@@ -647,7 +647,7 @@ static struct clk_rcg2 gcc_sdcc2_apps_clk_src = {
 		.name = "gcc_sdcc2_apps_clk_src",
 		.parent_names = gcc_parent_names_10,
 		.num_parents = 5,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_floor_ops,
 	},
 };
 
@@ -671,7 +671,7 @@ static struct clk_rcg2 gcc_sdcc4_apps_clk_src = {
 		.name = "gcc_sdcc4_apps_clk_src",
 		.parent_names = gcc_parent_names_0,
 		.num_parents = 4,
-		.ops = &clk_rcg2_ops,
+		.ops = &clk_rcg2_floor_ops,
 	},
 };
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 41/50] powerpc/pseries: correctly track irq state in default idle

[Sasha Levin]

From: Nathan Lynch <nathanl@linux.ibm.com>

[ Upstream commit 92c94dfb69e350471473fd3075c74bc68150879e ]

prep_irq_for_idle() is intended to be called before entering
H_CEDE (and it is used by the pseries cpuidle driver). However the
default pseries idle routine does not call it, leading to mismanaged
lazy irq state when the cpuidle driver isn't in use. Manifestations of
this include:

* Dropped IPIs in the time immediately after a cpu comes
  online (before it has installed the cpuidle handler), making the
  online operation block indefinitely waiting for the new cpu to
  respond.

* Hitting this WARN_ON in arch_local_irq_restore():
	/*
	 * We should already be hard disabled here. We had bugs
	 * where that wasn't the case so let's dbl check it and
	 * warn if we are wrong. Only do that when IRQ tracing
	 * is enabled as mfmsr() can be costly.
	 */
	if (WARN_ON_ONCE(mfmsr() & MSR_EE))
		__hard_irq_disable();

Call prep_irq_for_idle() from pseries_lpar_idle() and honor its
result.

Fixes: 363edbe2614a ("powerpc: Default arch idle could cede processor on pseries")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190910225244.25056-1-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/pseries/setup.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index ba1791fd3234d..67f49159ea708 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -325,6 +325,9 @@ static void pseries_lpar_idle(void)
 	 * low power mode by ceding processor to hypervisor
 	 */
 
+	if (!prep_irq_for_idle())
+		return;
+
 	/* Indicate to hypervisor that we are idle. */
 	get_lppaca()->idle = 1;
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 41/50] powerpc/pseries: correctly track irq state in default idle

[Sasha Levin]

From: Nathan Lynch <nathanl@linux.ibm.com>

[ Upstream commit 92c94dfb69e350471473fd3075c74bc68150879e ]

prep_irq_for_idle() is intended to be called before entering
H_CEDE (and it is used by the pseries cpuidle driver). However the
default pseries idle routine does not call it, leading to mismanaged
lazy irq state when the cpuidle driver isn't in use. Manifestations of
this include:

* Dropped IPIs in the time immediately after a cpu comes
  online (before it has installed the cpuidle handler), making the
  online operation block indefinitely waiting for the new cpu to
  respond.

* Hitting this WARN_ON in arch_local_irq_restore():
	/*
	 * We should already be hard disabled here. We had bugs
	 * where that wasn't the case so let's dbl check it and
	 * warn if we are wrong. Only do that when IRQ tracing
	 * is enabled as mfmsr() can be costly.
	 */
	if (WARN_ON_ONCE(mfmsr() & MSR_EE))
		__hard_irq_disable();

Call prep_irq_for_idle() from pseries_lpar_idle() and honor its
result.

Fixes: 363edbe2614a ("powerpc: Default arch idle could cede processor on pseries")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190910225244.25056-1-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/pseries/setup.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index ba1791fd3234d..67f49159ea708 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -325,6 +325,9 @@ static void pseries_lpar_idle(void)
 	 * low power mode by ceding processor to hypervisor
 	 */
 
+	if (!prep_irq_for_idle())
+		return;
+
 	/* Indicate to hypervisor that we are idle. */
 	get_lppaca()->idle = 1;
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 42/50] pinctrl: meson-gxbb: Fix wrong pinning definition for uart_c

[Sasha Levin]

From: Otto Meier <gf435@gmx.net>

[ Upstream commit cb0438e4436085d89706b5ccfce4d5da531253de ]

Hi i tried to use the uart_C of the the odroid-c2.

I enabled it in the dts file. During boot it crashed when the
the sdcard slot is addressed.

After long search in the net i found this:

https://forum.odroid.com/viewtopic.php?f=139&t=25371&p=194370&hilit=uart_C#p177856

After changing the pin definitions accordingly erverything works.
Uart_c is functioning and sdcard ist working.

Fixes: 6db0f3a8a04e46 ("pinctrl: amlogic: gxbb: add more UART pins")
Signed-off-by: Otto Meier <gf435@gmx.net>
Link: https://lore.kernel.org/r/1cc32a18-464d-5531-7a1c-084390e2ecb1@gmx.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
index 4edeb4cae72aa..c4c70dc57dbee 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
@@ -198,8 +198,8 @@ static const unsigned int uart_rts_b_pins[]	= { GPIODV_27 };
 
 static const unsigned int uart_tx_c_pins[]	= { GPIOY_13 };
 static const unsigned int uart_rx_c_pins[]	= { GPIOY_14 };
-static const unsigned int uart_cts_c_pins[]	= { GPIOX_11 };
-static const unsigned int uart_rts_c_pins[]	= { GPIOX_12 };
+static const unsigned int uart_cts_c_pins[]	= { GPIOY_11 };
+static const unsigned int uart_rts_c_pins[]	= { GPIOY_12 };
 
 static const unsigned int i2c_sck_a_pins[]	= { GPIODV_25 };
 static const unsigned int i2c_sda_a_pins[]	= { GPIODV_24 };
@@ -445,10 +445,10 @@ static struct meson_pmx_group meson_gxbb_periphs_groups[] = {
 	GROUP(pwm_f_x,		3,	18),
 
 	/* Bank Y */
-	GROUP(uart_cts_c,	1,	19),
-	GROUP(uart_rts_c,	1,	18),
-	GROUP(uart_tx_c,	1,	17),
-	GROUP(uart_rx_c,	1,	16),
+	GROUP(uart_cts_c,	1,	17),
+	GROUP(uart_rts_c,	1,	16),
+	GROUP(uart_tx_c,	1,	19),
+	GROUP(uart_rx_c,	1,	18),
 	GROUP(pwm_a_y,		1,	21),
 	GROUP(pwm_f_y,		1,	20),
 	GROUP(i2s_out_ch23_y,	1,	5),
-- 
2.20.1

[PATCH AUTOSEL 4.19 42/50] pinctrl: meson-gxbb: Fix wrong pinning definition for uart_c

[Sasha Levin]

From: Otto Meier <gf435@gmx.net>

[ Upstream commit cb0438e4436085d89706b5ccfce4d5da531253de ]

Hi i tried to use the uart_C of the the odroid-c2.

I enabled it in the dts file. During boot it crashed when the
the sdcard slot is addressed.

After long search in the net i found this:

https://forum.odroid.com/viewtopic.php?f=139&t=25371&p=194370&hilit=uart_C#p177856

After changing the pin definitions accordingly erverything works.
Uart_c is functioning and sdcard ist working.

Fixes: 6db0f3a8a04e46 ("pinctrl: amlogic: gxbb: add more UART pins")
Signed-off-by: Otto Meier <gf435@gmx.net>
Link: https://lore.kernel.org/r/1cc32a18-464d-5531-7a1c-084390e2ecb1@gmx.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
index 4edeb4cae72aa..c4c70dc57dbee 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
@@ -198,8 +198,8 @@ static const unsigned int uart_rts_b_pins[]	= { GPIODV_27 };
 
 static const unsigned int uart_tx_c_pins[]	= { GPIOY_13 };
 static const unsigned int uart_rx_c_pins[]	= { GPIOY_14 };
-static const unsigned int uart_cts_c_pins[]	= { GPIOX_11 };
-static const unsigned int uart_rts_c_pins[]	= { GPIOX_12 };
+static const unsigned int uart_cts_c_pins[]	= { GPIOY_11 };
+static const unsigned int uart_rts_c_pins[]	= { GPIOY_12 };
 
 static const unsigned int i2c_sck_a_pins[]	= { GPIODV_25 };
 static const unsigned int i2c_sda_a_pins[]	= { GPIODV_24 };
@@ -445,10 +445,10 @@ static struct meson_pmx_group meson_gxbb_periphs_groups[] = {
 	GROUP(pwm_f_x,		3,	18),
 
 	/* Bank Y */
-	GROUP(uart_cts_c,	1,	19),
-	GROUP(uart_rts_c,	1,	18),
-	GROUP(uart_tx_c,	1,	17),
-	GROUP(uart_rx_c,	1,	16),
+	GROUP(uart_cts_c,	1,	17),
+	GROUP(uart_rts_c,	1,	16),
+	GROUP(uart_tx_c,	1,	19),
+	GROUP(uart_rx_c,	1,	18),
 	GROUP(pwm_a_y,		1,	21),
 	GROUP(pwm_f_y,		1,	20),
 	GROUP(i2s_out_ch23_y,	1,	5),
-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH AUTOSEL 4.19 43/50] arm64: fix unreachable code issue with cmpxchg

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 920fdab7b3ce98c14c840261e364f490f3679a62 ]

On arm64 build with clang, sometimes the __cmpxchg_mb is not inlined
when CONFIG_OPTIMIZE_INLINING is set.
Clang then fails a compile-time assertion, because it cannot tell at
compile time what the size of the argument is:

mm/memcontrol.o: In function `__cmpxchg_mb':
memcontrol.c:(.text+0x1a4c): undefined reference to `__compiletime_assert_175'
memcontrol.c:(.text+0x1a4c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `__compiletime_assert_175'

Mark all of the cmpxchg() style functions as __always_inline to
ensure that the compiler can see the result.

Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/648
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Tested-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/include/asm/cmpxchg.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/include/asm/cmpxchg.h b/arch/arm64/include/asm/cmpxchg.h
index 3b09382815419..d8b01c7c9cd3f 100644
--- a/arch/arm64/include/asm/cmpxchg.h
+++ b/arch/arm64/include/asm/cmpxchg.h
@@ -74,7 +74,7 @@ __XCHG_CASE( ,  ,  mb_8, dmb ish, nop,  , a, l, "memory")
 #undef __XCHG_CASE
 
 #define __XCHG_GEN(sfx)							\
-static inline unsigned long __xchg##sfx(unsigned long x,		\
+static __always_inline  unsigned long __xchg##sfx(unsigned long x,	\
 					volatile void *ptr,		\
 					int size)			\
 {									\
@@ -116,7 +116,7 @@ __XCHG_GEN(_mb)
 #define xchg(...)		__xchg_wrapper( _mb, __VA_ARGS__)
 
 #define __CMPXCHG_GEN(sfx)						\
-static inline unsigned long __cmpxchg##sfx(volatile void *ptr,		\
+static __always_inline unsigned long __cmpxchg##sfx(volatile void *ptr,	\
 					   unsigned long old,		\
 					   unsigned long new,		\
 					   int size)			\
@@ -223,7 +223,7 @@ __CMPWAIT_CASE( ,  , 8);
 #undef __CMPWAIT_CASE
 
 #define __CMPWAIT_GEN(sfx)						\
-static inline void __cmpwait##sfx(volatile void *ptr,			\
+static __always_inline void __cmpwait##sfx(volatile void *ptr,		\
 				  unsigned long val,			\
 				  int size)				\
 {									\
-- 
2.20.1

[PATCH AUTOSEL 4.19 44/50] clk: at91: select parent if main oscillator or bypass is enabled

[Sasha Levin]

From: Eugen Hristev <eugen.hristev@microchip.com>

[ Upstream commit 69a6bcde7fd3fe6f3268ce26f31d9d9378384c98 ]

Selecting the right parent for the main clock is done using only
main oscillator enabled bit.
In case we have this oscillator bypassed by an external signal (no driving
on the XOUT line), we still use external clock, but with BYPASS bit set.
So, in this case we must select the same parent as before.
Create a macro that will select the right parent considering both bits from
the MOR register.
Use this macro when looking for the right parent.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Link: https://lkml.kernel.org/r/1568042692-11784-2-git-send-email-eugen.hristev@microchip.com
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/at91/clk-main.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/at91/clk-main.c b/drivers/clk/at91/clk-main.c
index c813c27f2e58c..2f97a843d6d6b 100644
--- a/drivers/clk/at91/clk-main.c
+++ b/drivers/clk/at91/clk-main.c
@@ -27,6 +27,10 @@
 
 #define MOR_KEY_MASK		(0xff << 16)
 
+#define clk_main_parent_select(s)	(((s) & \
+					(AT91_PMC_MOSCEN | \
+					AT91_PMC_OSCBYPASS)) ? 1 : 0)
+
 struct clk_main_osc {
 	struct clk_hw hw;
 	struct regmap *regmap;
@@ -119,7 +123,7 @@ static int clk_main_osc_is_prepared(struct clk_hw *hw)
 
 	regmap_read(regmap, AT91_PMC_SR, &status);
 
-	return (status & AT91_PMC_MOSCS) && (tmp & AT91_PMC_MOSCEN);
+	return (status & AT91_PMC_MOSCS) && clk_main_parent_select(tmp);
 }
 
 static const struct clk_ops main_osc_ops = {
@@ -530,7 +534,7 @@ static u8 clk_sam9x5_main_get_parent(struct clk_hw *hw)
 
 	regmap_read(clkmain->regmap, AT91_CKGR_MOR, &status);
 
-	return status & AT91_PMC_MOSCEN ? 1 : 0;
+	return clk_main_parent_select(status);
 }
 
 static const struct clk_ops sam9x5_main_ops = {
@@ -572,7 +576,7 @@ at91_clk_register_sam9x5_main(struct regmap *regmap,
 	clkmain->hw.init = &init;
 	clkmain->regmap = regmap;
 	regmap_read(clkmain->regmap, AT91_CKGR_MOR, &status);
-	clkmain->parent = status & AT91_PMC_MOSCEN ? 1 : 0;
+	clkmain->parent = clk_main_parent_select(status);
 
 	hw = &clkmain->hw;
 	ret = clk_hw_register(NULL, &clkmain->hw);
-- 
2.20.1

[PATCH AUTOSEL 4.19 45/50] powerpc: dump kernel log before carrying out fadump or kdump

[Sasha Levin]

From: Ganesh Goudar <ganeshgr@linux.ibm.com>

[ Upstream commit e7ca44ed3ba77fc26cf32650bb71584896662474 ]

Since commit 4388c9b3a6ee ("powerpc: Do not send system reset request
through the oops path"), pstore dmesg file is not updated when dump is
triggered from HMC. This commit modified system reset (sreset) handler
to invoke fadump or kdump (if configured), without pushing dmesg to
pstore. This leaves pstore to have old dmesg data which won't be much
of a help if kdump fails to capture the dump. This patch fixes that by
calling kmsg_dump() before heading to fadump ot kdump.

Fixes: 4388c9b3a6ee ("powerpc: Do not send system reset request through the oops path")
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190904075949.15607-1-ganeshgr@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/traps.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 02fe6d0201741..d5f351f02c153 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -399,6 +399,7 @@ void system_reset_exception(struct pt_regs *regs)
 	if (debugger(regs))
 		goto out;
 
+	kmsg_dump(KMSG_DUMP_OOPS);
 	/*
 	 * A system reset is a request to dump, so we always send
 	 * it through the crashdump code (if fadump or kdump are
-- 
2.20.1

[PATCH AUTOSEL 4.19 45/50] powerpc: dump kernel log before carrying out fadump or kdump

[Sasha Levin]

From: Ganesh Goudar <ganeshgr@linux.ibm.com>

[ Upstream commit e7ca44ed3ba77fc26cf32650bb71584896662474 ]

Since commit 4388c9b3a6ee ("powerpc: Do not send system reset request
through the oops path"), pstore dmesg file is not updated when dump is
triggered from HMC. This commit modified system reset (sreset) handler
to invoke fadump or kdump (if configured), without pushing dmesg to
pstore. This leaves pstore to have old dmesg data which won't be much
of a help if kdump fails to capture the dump. This patch fixes that by
calling kmsg_dump() before heading to fadump ot kdump.

Fixes: 4388c9b3a6ee ("powerpc: Do not send system reset request through the oops path")
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190904075949.15607-1-ganeshgr@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/traps.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 02fe6d0201741..d5f351f02c153 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -399,6 +399,7 @@ void system_reset_exception(struct pt_regs *regs)
 	if (debugger(regs))
 		goto out;
 
+	kmsg_dump(KMSG_DUMP_OOPS);
 	/*
 	 * A system reset is a request to dump, so we always send
 	 * it through the crashdump code (if fadump or kdump are
-- 
2.20.1

[PATCH AUTOSEL 4.19 46/50] mbox: qcom: add APCS child device for QCS404

[Sasha Levin]

From: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>

[ Upstream commit 78c86458a440ff356073c21b568cb58ddb67b82b ]

There is clock controller functionality in the APCS hardware block of
qcs404 devices similar to msm8916.

Co-developed-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mailbox/qcom-apcs-ipc-mailbox.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/mailbox/qcom-apcs-ipc-mailbox.c b/drivers/mailbox/qcom-apcs-ipc-mailbox.c
index 333ed4a9d4b8f..5255dcb551a78 100644
--- a/drivers/mailbox/qcom-apcs-ipc-mailbox.c
+++ b/drivers/mailbox/qcom-apcs-ipc-mailbox.c
@@ -55,7 +55,6 @@ static const struct mbox_chan_ops qcom_apcs_ipc_ops = {
 
 static int qcom_apcs_ipc_probe(struct platform_device *pdev)
 {
-	struct device_node *np = pdev->dev.of_node;
 	struct qcom_apcs_ipc *apcs;
 	struct regmap *regmap;
 	struct resource *res;
@@ -63,6 +62,11 @@ static int qcom_apcs_ipc_probe(struct platform_device *pdev)
 	void __iomem *base;
 	unsigned long i;
 	int ret;
+	const struct of_device_id apcs_clk_match_table[] = {
+		{ .compatible = "qcom,msm8916-apcs-kpss-global", },
+		{ .compatible = "qcom,qcs404-apcs-apps-global", },
+		{}
+	};
 
 	apcs = devm_kzalloc(&pdev->dev, sizeof(*apcs), GFP_KERNEL);
 	if (!apcs)
@@ -97,7 +101,7 @@ static int qcom_apcs_ipc_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	if (of_device_is_compatible(np, "qcom,msm8916-apcs-kpss-global")) {
+	if (of_match_device(apcs_clk_match_table, &pdev->dev)) {
 		apcs->clk = platform_device_register_data(&pdev->dev,
 							  "qcom-apcs-msm8916-clk",
 							  -1, NULL, 0);
-- 
2.20.1

[PATCH AUTOSEL 4.19 47/50] clk: sprd: add missing kfree

[Sasha Levin]

From: Chunyan Zhang <chunyan.zhang@unisoc.com>

[ Upstream commit 5e75ea9c67433a065b0e8595ad3c91c7c0ca0d2d ]

The number of config registers for different pll clocks probably are not
same, so we have to use malloc, and should free the memory before return.

Fixes: 3e37b005580b ("clk: sprd: add adjustable pll support")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com>
Link: https://lkml.kernel.org/r/20190905103009.27166-1-zhang.lyra@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/sprd/pll.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/clk/sprd/pll.c b/drivers/clk/sprd/pll.c
index 36b4402bf09e3..640270f51aa56 100644
--- a/drivers/clk/sprd/pll.c
+++ b/drivers/clk/sprd/pll.c
@@ -136,6 +136,7 @@ static unsigned long _sprd_pll_recalc_rate(const struct sprd_pll *pll,
 					 k2 + refin * nint * CLK_PLL_1M;
 	}
 
+	kfree(cfg);
 	return rate;
 }
 
@@ -222,6 +223,7 @@ static int _sprd_pll_set_rate(const struct sprd_pll *pll,
 	if (!ret)
 		udelay(pll->udelay);
 
+	kfree(cfg);
 	return ret;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 48/50] scsi: core: Reduce memory required for SCSI logging

[Sasha Levin]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit dccc96abfb21dc19d69e707c38c8ba439bba7160 ]

The data structure used for log messages is so large that it can cause a
boot failure. Since allocations from that data structure can fail anyway,
use kmalloc() / kfree() instead of that data structure.

See also https://bugzilla.kernel.org/show_bug.cgi?id=204119.
See also commit ded85c193a39 ("scsi: Implement per-cpu logging buffer") # v4.0.

Reported-by: Jan Palus <jpalus@fastmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Jan Palus <jpalus@fastmail.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/scsi_logging.c | 48 +++----------------------------------
 include/scsi/scsi_dbg.h     |  2 --
 2 files changed, 3 insertions(+), 47 deletions(-)

diff --git a/drivers/scsi/scsi_logging.c b/drivers/scsi/scsi_logging.c
index bd70339c1242e..03d9855a6afd7 100644
--- a/drivers/scsi/scsi_logging.c
+++ b/drivers/scsi/scsi_logging.c
@@ -16,57 +16,15 @@
 #include <scsi/scsi_eh.h>
 #include <scsi/scsi_dbg.h>
 
-#define SCSI_LOG_SPOOLSIZE 4096
-
-#if (SCSI_LOG_SPOOLSIZE / SCSI_LOG_BUFSIZE) > BITS_PER_LONG
-#warning SCSI logging bitmask too large
-#endif
-
-struct scsi_log_buf {
-	char buffer[SCSI_LOG_SPOOLSIZE];
-	unsigned long map;
-};
-
-static DEFINE_PER_CPU(struct scsi_log_buf, scsi_format_log);
-
 static char *scsi_log_reserve_buffer(size_t *len)
 {
-	struct scsi_log_buf *buf;
-	unsigned long map_bits = sizeof(buf->buffer) / SCSI_LOG_BUFSIZE;
-	unsigned long idx = 0;
-
-	preempt_disable();
-	buf = this_cpu_ptr(&scsi_format_log);
-	idx = find_first_zero_bit(&buf->map, map_bits);
-	if (likely(idx < map_bits)) {
-		while (test_and_set_bit(idx, &buf->map)) {
-			idx = find_next_zero_bit(&buf->map, map_bits, idx);
-			if (idx >= map_bits)
-				break;
-		}
-	}
-	if (WARN_ON(idx >= map_bits)) {
-		preempt_enable();
-		return NULL;
-	}
-	*len = SCSI_LOG_BUFSIZE;
-	return buf->buffer + idx * SCSI_LOG_BUFSIZE;
+	*len = 128;
+	return kmalloc(*len, GFP_ATOMIC);
 }
 
 static void scsi_log_release_buffer(char *bufptr)
 {
-	struct scsi_log_buf *buf;
-	unsigned long idx;
-	int ret;
-
-	buf = this_cpu_ptr(&scsi_format_log);
-	if (bufptr >= buf->buffer &&
-	    bufptr < buf->buffer + SCSI_LOG_SPOOLSIZE) {
-		idx = (bufptr - buf->buffer) / SCSI_LOG_BUFSIZE;
-		ret = test_and_clear_bit(idx, &buf->map);
-		WARN_ON(!ret);
-	}
-	preempt_enable();
+	kfree(bufptr);
 }
 
 static inline const char *scmd_name(const struct scsi_cmnd *scmd)
diff --git a/include/scsi/scsi_dbg.h b/include/scsi/scsi_dbg.h
index e03bd9d41fa8f..7b196d2346264 100644
--- a/include/scsi/scsi_dbg.h
+++ b/include/scsi/scsi_dbg.h
@@ -6,8 +6,6 @@ struct scsi_cmnd;
 struct scsi_device;
 struct scsi_sense_hdr;
 
-#define SCSI_LOG_BUFSIZE 128
-
 extern void scsi_print_command(struct scsi_cmnd *);
 extern size_t __scsi_format_command(char *, size_t,
 				   const unsigned char *, size_t);
-- 
2.20.1

[PATCH AUTOSEL 4.19 49/50] dma-buf/sw_sync: Synchronize signal vs syncpt free

[Sasha Levin]

From: Chris Wilson <chris@chris-wilson.co.uk>

[ Upstream commit d3c6dd1fb30d3853c2012549affe75c930f4a2f9 ]

During release of the syncpt, we remove it from the list of syncpt and
the tree, but only if it is not already been removed. However, during
signaling, we first remove the syncpt from the list. So, if we
concurrently free and signal the syncpt, the free may decide that it is
not part of the tree and immediately free itself -- meanwhile the
signaler goes on to use the now freed datastructure.

In particular, we get struck by commit 0e2f733addbf ("dma-buf: make
dma_fence structure a bit smaller v2") as the cb_list is immediately
clobbered by the kfree_rcu.

v2: Avoid calling into timeline_fence_release() from under the spinlock

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111381
Fixes: d3862e44daa7 ("dma-buf/sw-sync: Fix locking around sync_timeline lists")
References: 0e2f733addbf ("dma-buf: make dma_fence structure a bit smaller v2")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Christian König <christian.koenig@amd.com>
Cc: <stable@vger.kernel.org> # v4.14+
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812154247.20508-1-chris@chris-wilson.co.uk
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma-buf/sw_sync.c | 16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)

diff --git a/drivers/dma-buf/sw_sync.c b/drivers/dma-buf/sw_sync.c
index 53c1d6d36a642..81ba4eb348909 100644
--- a/drivers/dma-buf/sw_sync.c
+++ b/drivers/dma-buf/sw_sync.c
@@ -141,17 +141,14 @@ static void timeline_fence_release(struct dma_fence *fence)
 {
 	struct sync_pt *pt = dma_fence_to_sync_pt(fence);
 	struct sync_timeline *parent = dma_fence_parent(fence);
+	unsigned long flags;
 
+	spin_lock_irqsave(fence->lock, flags);
 	if (!list_empty(&pt->link)) {
-		unsigned long flags;
-
-		spin_lock_irqsave(fence->lock, flags);
-		if (!list_empty(&pt->link)) {
-			list_del(&pt->link);
-			rb_erase(&pt->node, &parent->pt_tree);
-		}
-		spin_unlock_irqrestore(fence->lock, flags);
+		list_del(&pt->link);
+		rb_erase(&pt->node, &parent->pt_tree);
 	}
+	spin_unlock_irqrestore(fence->lock, flags);
 
 	sync_timeline_put(parent);
 	dma_fence_free(fence);
@@ -274,7 +271,8 @@ static struct sync_pt *sync_pt_create(struct sync_timeline *obj,
 				p = &parent->rb_left;
 			} else {
 				if (dma_fence_get_rcu(&other->base)) {
-					dma_fence_put(&pt->base);
+					sync_timeline_put(obj);
+					kfree(pt);
 					pt = other;
 					goto unlock;
 				}
-- 
2.20.1

[PATCH AUTOSEL 4.19 49/50] dma-buf/sw_sync: Synchronize signal vs syncpt free

[Sasha Levin]

From: Chris Wilson <chris@chris-wilson.co.uk>

[ Upstream commit d3c6dd1fb30d3853c2012549affe75c930f4a2f9 ]

During release of the syncpt, we remove it from the list of syncpt and
the tree, but only if it is not already been removed. However, during
signaling, we first remove the syncpt from the list. So, if we
concurrently free and signal the syncpt, the free may decide that it is
not part of the tree and immediately free itself -- meanwhile the
signaler goes on to use the now freed datastructure.

In particular, we get struck by commit 0e2f733addbf ("dma-buf: make
dma_fence structure a bit smaller v2") as the cb_list is immediately
clobbered by the kfree_rcu.

v2: Avoid calling into timeline_fence_release() from under the spinlock

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111381
Fixes: d3862e44daa7 ("dma-buf/sw-sync: Fix locking around sync_timeline lists")
References: 0e2f733addbf ("dma-buf: make dma_fence structure a bit smaller v2")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Christian König <christian.koenig@amd.com>
Cc: <stable@vger.kernel.org> # v4.14+
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190812154247.20508-1-chris@chris-wilson.co.uk
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma-buf/sw_sync.c | 16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)

diff --git a/drivers/dma-buf/sw_sync.c b/drivers/dma-buf/sw_sync.c
index 53c1d6d36a642..81ba4eb348909 100644
--- a/drivers/dma-buf/sw_sync.c
+++ b/drivers/dma-buf/sw_sync.c
@@ -141,17 +141,14 @@ static void timeline_fence_release(struct dma_fence *fence)
 {
 	struct sync_pt *pt = dma_fence_to_sync_pt(fence);
 	struct sync_timeline *parent = dma_fence_parent(fence);
+	unsigned long flags;
 
+	spin_lock_irqsave(fence->lock, flags);
 	if (!list_empty(&pt->link)) {
-		unsigned long flags;
-
-		spin_lock_irqsave(fence->lock, flags);
-		if (!list_empty(&pt->link)) {
-			list_del(&pt->link);
-			rb_erase(&pt->node, &parent->pt_tree);
-		}
-		spin_unlock_irqrestore(fence->lock, flags);
+		list_del(&pt->link);
+		rb_erase(&pt->node, &parent->pt_tree);
 	}
+	spin_unlock_irqrestore(fence->lock, flags);
 
 	sync_timeline_put(parent);
 	dma_fence_free(fence);
@@ -274,7 +271,8 @@ static struct sync_pt *sync_pt_create(struct sync_timeline *obj,
 				p = &parent->rb_left;
 			} else {
 				if (dma_fence_get_rcu(&other->base)) {
-					dma_fence_put(&pt->base);
+					sync_timeline_put(obj);
+					kfree(pt);
 					pt = other;
 					goto unlock;
 				}
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.19 50/50] ext4: fix potential use after free after remounting with noblock_validity

[Sasha Levin]

From: "zhangyi (F)" <yi.zhang@huawei.com>

[ Upstream commit 7727ae52975d4f4ef7ff69ed8e6e25f6a4168158 ]

Remount process will release system zone which was allocated before if
"noblock_validity" is specified. If we mount an ext4 file system to two
mountpoints with default mount options, and then remount one of them
with "noblock_validity", it may trigger a use after free problem when
someone accessing the other one.

 # mount /dev/sda foo
 # mount /dev/sda bar

User access mountpoint "foo"   |   Remount mountpoint "bar"
                               |
ext4_map_blocks()              |   ext4_remount()
check_block_validity()         |   ext4_setup_system_zone()
ext4_data_block_valid()        |   ext4_release_system_zone()
                               |   free system_blks rb nodes
access system_blks rb nodes    |
trigger use after free         |

This problem can also be reproduced by one mountpint, At the same time,
add_system_zone() can get called during remount as well so there can be
racing ext4_data_block_valid() reading the rbtree at the same time.

This patch add RCU to protect system zone from releasing or building
when doing a remount which inverse current "noblock_validity" mount
option. It assign the rbtree after the whole tree was complete and
do actual freeing after rcu grace period, avoid any intermediate state.

Reported-by: syzbot+1e470567330b7ad711d5@syzkaller.appspotmail.com
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/block_validity.c | 189 ++++++++++++++++++++++++++++-----------
 fs/ext4/ext4.h           |  10 ++-
 2 files changed, 147 insertions(+), 52 deletions(-)

diff --git a/fs/ext4/block_validity.c b/fs/ext4/block_validity.c
index e8e27cdc2f677..7edc8172c53ad 100644
--- a/fs/ext4/block_validity.c
+++ b/fs/ext4/block_validity.c
@@ -38,6 +38,7 @@ int __init ext4_init_system_zone(void)
 
 void ext4_exit_system_zone(void)
 {
+	rcu_barrier();
 	kmem_cache_destroy(ext4_system_zone_cachep);
 }
 
@@ -49,17 +50,26 @@ static inline int can_merge(struct ext4_system_zone *entry1,
 	return 0;
 }
 
+static void release_system_zone(struct ext4_system_blocks *system_blks)
+{
+	struct ext4_system_zone	*entry, *n;
+
+	rbtree_postorder_for_each_entry_safe(entry, n,
+				&system_blks->root, node)
+		kmem_cache_free(ext4_system_zone_cachep, entry);
+}
+
 /*
  * Mark a range of blocks as belonging to the "system zone" --- that
  * is, filesystem metadata blocks which should never be used by
  * inodes.
  */
-static int add_system_zone(struct ext4_sb_info *sbi,
+static int add_system_zone(struct ext4_system_blocks *system_blks,
 			   ext4_fsblk_t start_blk,
 			   unsigned int count)
 {
 	struct ext4_system_zone *new_entry = NULL, *entry;
-	struct rb_node **n = &sbi->system_blks.rb_node, *node;
+	struct rb_node **n = &system_blks->root.rb_node, *node;
 	struct rb_node *parent = NULL, *new_node = NULL;
 
 	while (*n) {
@@ -91,7 +101,7 @@ static int add_system_zone(struct ext4_sb_info *sbi,
 		new_node = &new_entry->node;
 
 		rb_link_node(new_node, parent, n);
-		rb_insert_color(new_node, &sbi->system_blks);
+		rb_insert_color(new_node, &system_blks->root);
 	}
 
 	/* Can we merge to the left? */
@@ -101,7 +111,7 @@ static int add_system_zone(struct ext4_sb_info *sbi,
 		if (can_merge(entry, new_entry)) {
 			new_entry->start_blk = entry->start_blk;
 			new_entry->count += entry->count;
-			rb_erase(node, &sbi->system_blks);
+			rb_erase(node, &system_blks->root);
 			kmem_cache_free(ext4_system_zone_cachep, entry);
 		}
 	}
@@ -112,7 +122,7 @@ static int add_system_zone(struct ext4_sb_info *sbi,
 		entry = rb_entry(node, struct ext4_system_zone, node);
 		if (can_merge(new_entry, entry)) {
 			new_entry->count += entry->count;
-			rb_erase(node, &sbi->system_blks);
+			rb_erase(node, &system_blks->root);
 			kmem_cache_free(ext4_system_zone_cachep, entry);
 		}
 	}
@@ -126,7 +136,7 @@ static void debug_print_tree(struct ext4_sb_info *sbi)
 	int first = 1;
 
 	printk(KERN_INFO "System zones: ");
-	node = rb_first(&sbi->system_blks);
+	node = rb_first(&sbi->system_blks->root);
 	while (node) {
 		entry = rb_entry(node, struct ext4_system_zone, node);
 		printk(KERN_CONT "%s%llu-%llu", first ? "" : ", ",
@@ -137,7 +147,47 @@ static void debug_print_tree(struct ext4_sb_info *sbi)
 	printk(KERN_CONT "\n");
 }
 
-static int ext4_protect_reserved_inode(struct super_block *sb, u32 ino)
+/*
+ * Returns 1 if the passed-in block region (start_blk,
+ * start_blk+count) is valid; 0 if some part of the block region
+ * overlaps with filesystem metadata blocks.
+ */
+static int ext4_data_block_valid_rcu(struct ext4_sb_info *sbi,
+				     struct ext4_system_blocks *system_blks,
+				     ext4_fsblk_t start_blk,
+				     unsigned int count)
+{
+	struct ext4_system_zone *entry;
+	struct rb_node *n;
+
+	if ((start_blk <= le32_to_cpu(sbi->s_es->s_first_data_block)) ||
+	    (start_blk + count < start_blk) ||
+	    (start_blk + count > ext4_blocks_count(sbi->s_es))) {
+		sbi->s_es->s_last_error_block = cpu_to_le64(start_blk);
+		return 0;
+	}
+
+	if (system_blks == NULL)
+		return 1;
+
+	n = system_blks->root.rb_node;
+	while (n) {
+		entry = rb_entry(n, struct ext4_system_zone, node);
+		if (start_blk + count - 1 < entry->start_blk)
+			n = n->rb_left;
+		else if (start_blk >= (entry->start_blk + entry->count))
+			n = n->rb_right;
+		else {
+			sbi->s_es->s_last_error_block = cpu_to_le64(start_blk);
+			return 0;
+		}
+	}
+	return 1;
+}
+
+static int ext4_protect_reserved_inode(struct super_block *sb,
+				       struct ext4_system_blocks *system_blks,
+				       u32 ino)
 {
 	struct inode *inode;
 	struct ext4_sb_info *sbi = EXT4_SB(sb);
@@ -163,14 +213,15 @@ static int ext4_protect_reserved_inode(struct super_block *sb, u32 ino)
 		if (n == 0) {
 			i++;
 		} else {
-			if (!ext4_data_block_valid(sbi, map.m_pblk, n)) {
+			if (!ext4_data_block_valid_rcu(sbi, system_blks,
+						map.m_pblk, n)) {
 				ext4_error(sb, "blocks %llu-%llu from inode %u "
 					   "overlap system zone", map.m_pblk,
 					   map.m_pblk + map.m_len - 1, ino);
 				err = -EFSCORRUPTED;
 				break;
 			}
-			err = add_system_zone(sbi, map.m_pblk, n);
+			err = add_system_zone(system_blks, map.m_pblk, n);
 			if (err < 0)
 				break;
 			i += n;
@@ -180,93 +231,129 @@ static int ext4_protect_reserved_inode(struct super_block *sb, u32 ino)
 	return err;
 }
 
+static void ext4_destroy_system_zone(struct rcu_head *rcu)
+{
+	struct ext4_system_blocks *system_blks;
+
+	system_blks = container_of(rcu, struct ext4_system_blocks, rcu);
+	release_system_zone(system_blks);
+	kfree(system_blks);
+}
+
+/*
+ * Build system zone rbtree which is used for block validity checking.
+ *
+ * The update of system_blks pointer in this function is protected by
+ * sb->s_umount semaphore. However we have to be careful as we can be
+ * racing with ext4_data_block_valid() calls reading system_blks rbtree
+ * protected only by RCU. That's why we first build the rbtree and then
+ * swap it in place.
+ */
 int ext4_setup_system_zone(struct super_block *sb)
 {
 	ext4_group_t ngroups = ext4_get_groups_count(sb);
 	struct ext4_sb_info *sbi = EXT4_SB(sb);
+	struct ext4_system_blocks *system_blks;
 	struct ext4_group_desc *gdp;
 	ext4_group_t i;
 	int flex_size = ext4_flex_bg_size(sbi);
 	int ret;
 
 	if (!test_opt(sb, BLOCK_VALIDITY)) {
-		if (sbi->system_blks.rb_node)
+		if (sbi->system_blks)
 			ext4_release_system_zone(sb);
 		return 0;
 	}
-	if (sbi->system_blks.rb_node)
+	if (sbi->system_blks)
 		return 0;
 
+	system_blks = kzalloc(sizeof(*system_blks), GFP_KERNEL);
+	if (!system_blks)
+		return -ENOMEM;
+
 	for (i=0; i < ngroups; i++) {
 		if (ext4_bg_has_super(sb, i) &&
 		    ((i < 5) || ((i % flex_size) == 0)))
-			add_system_zone(sbi, ext4_group_first_block_no(sb, i),
+			add_system_zone(system_blks,
+					ext4_group_first_block_no(sb, i),
 					ext4_bg_num_gdb(sb, i) + 1);
 		gdp = ext4_get_group_desc(sb, i, NULL);
-		ret = add_system_zone(sbi, ext4_block_bitmap(sb, gdp), 1);
+		ret = add_system_zone(system_blks,
+				ext4_block_bitmap(sb, gdp), 1);
 		if (ret)
-			return ret;
-		ret = add_system_zone(sbi, ext4_inode_bitmap(sb, gdp), 1);
+			goto err;
+		ret = add_system_zone(system_blks,
+				ext4_inode_bitmap(sb, gdp), 1);
 		if (ret)
-			return ret;
-		ret = add_system_zone(sbi, ext4_inode_table(sb, gdp),
+			goto err;
+		ret = add_system_zone(system_blks,
+				ext4_inode_table(sb, gdp),
 				sbi->s_itb_per_group);
 		if (ret)
-			return ret;
+			goto err;
 	}
 	if (ext4_has_feature_journal(sb) && sbi->s_es->s_journal_inum) {
-		ret = ext4_protect_reserved_inode(sb,
+		ret = ext4_protect_reserved_inode(sb, system_blks,
 				le32_to_cpu(sbi->s_es->s_journal_inum));
 		if (ret)
-			return ret;
+			goto err;
 	}
 
+	/*
+	 * System blks rbtree complete, announce it once to prevent racing
+	 * with ext4_data_block_valid() accessing the rbtree at the same
+	 * time.
+	 */
+	rcu_assign_pointer(sbi->system_blks, system_blks);
+
 	if (test_opt(sb, DEBUG))
 		debug_print_tree(sbi);
 	return 0;
+err:
+	release_system_zone(system_blks);
+	kfree(system_blks);
+	return ret;
 }
 
-/* Called when the filesystem is unmounted */
+/*
+ * Called when the filesystem is unmounted or when remounting it with
+ * noblock_validity specified.
+ *
+ * The update of system_blks pointer in this function is protected by
+ * sb->s_umount semaphore. However we have to be careful as we can be
+ * racing with ext4_data_block_valid() calls reading system_blks rbtree
+ * protected only by RCU. So we first clear the system_blks pointer and
+ * then free the rbtree only after RCU grace period expires.
+ */
 void ext4_release_system_zone(struct super_block *sb)
 {
-	struct ext4_system_zone	*entry, *n;
+	struct ext4_system_blocks *system_blks;
 
-	rbtree_postorder_for_each_entry_safe(entry, n,
-			&EXT4_SB(sb)->system_blks, node)
-		kmem_cache_free(ext4_system_zone_cachep, entry);
+	system_blks = rcu_dereference_protected(EXT4_SB(sb)->system_blks,
+					lockdep_is_held(&sb->s_umount));
+	rcu_assign_pointer(EXT4_SB(sb)->system_blks, NULL);
 
-	EXT4_SB(sb)->system_blks = RB_ROOT;
+	if (system_blks)
+		call_rcu(&system_blks->rcu, ext4_destroy_system_zone);
 }
 
-/*
- * Returns 1 if the passed-in block region (start_blk,
- * start_blk+count) is valid; 0 if some part of the block region
- * overlaps with filesystem metadata blocks.
- */
 int ext4_data_block_valid(struct ext4_sb_info *sbi, ext4_fsblk_t start_blk,
 			  unsigned int count)
 {
-	struct ext4_system_zone *entry;
-	struct rb_node *n = sbi->system_blks.rb_node;
+	struct ext4_system_blocks *system_blks;
+	int ret;
 
-	if ((start_blk <= le32_to_cpu(sbi->s_es->s_first_data_block)) ||
-	    (start_blk + count < start_blk) ||
-	    (start_blk + count > ext4_blocks_count(sbi->s_es))) {
-		sbi->s_es->s_last_error_block = cpu_to_le64(start_blk);
-		return 0;
-	}
-	while (n) {
-		entry = rb_entry(n, struct ext4_system_zone, node);
-		if (start_blk + count - 1 < entry->start_blk)
-			n = n->rb_left;
-		else if (start_blk >= (entry->start_blk + entry->count))
-			n = n->rb_right;
-		else {
-			sbi->s_es->s_last_error_block = cpu_to_le64(start_blk);
-			return 0;
-		}
-	}
-	return 1;
+	/*
+	 * Lock the system zone to prevent it being released concurrently
+	 * when doing a remount which inverse current "[no]block_validity"
+	 * mount option.
+	 */
+	rcu_read_lock();
+	system_blks = rcu_dereference(sbi->system_blks);
+	ret = ext4_data_block_valid_rcu(sbi, system_blks, start_blk,
+					count);
+	rcu_read_unlock();
+	return ret;
 }
 
 int ext4_check_blockref(const char *function, unsigned int line,
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index 1ee51d3a978ad..f8456a423c4ea 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -194,6 +194,14 @@ struct ext4_map_blocks {
 	unsigned int m_flags;
 };
 
+/*
+ * Block validity checking, system zone rbtree.
+ */
+struct ext4_system_blocks {
+	struct rb_root root;
+	struct rcu_head rcu;
+};
+
 /*
  * Flags for ext4_io_end->flags
  */
@@ -1409,7 +1417,7 @@ struct ext4_sb_info {
 	int s_jquota_fmt;			/* Format of quota to use */
 #endif
 	unsigned int s_want_extra_isize; /* New inodes should reserve # bytes */
-	struct rb_root system_blks;
+	struct ext4_system_blocks __rcu *system_blks;
 
 #ifdef EXTENTS_STATS
 	/* ext4 extents stats */
-- 
2.20.1