[PATCH AUTOSEL 4.9 01/19] drm/bridge: tc358767: Increase AUX transfer length limit

[PATCH AUTOSEL 4.9 01/19] drm/bridge: tc358767: Increase AUX transfer length limit

[Sasha Levin]

From: Andrey Smirnov <andrew.smirnov@gmail.com>

[ Upstream commit e0655feaec62d5139b6b13a7b1bbb1ab8f1c2d83 ]

According to the datasheet tc358767 can transfer up to 16 bytes via
its AUX channel, so the artificial limit of 8 appears to be too
low. However only up to 15-bytes seem to be actually supported and
trying to use 16-byte transfers results in transfers failing
sporadically (with bogus status in case of I2C transfers), so limit it
to 15.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619052716.16831-9-andrew.smirnov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/tc358767.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index 80993a8734e08..8b6f8fac92e89 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -300,7 +300,7 @@ static ssize_t tc_aux_transfer(struct drm_dp_aux *aux,
 			       struct drm_dp_aux_msg *msg)
 {
 	struct tc_data *tc = aux_to_tc(aux);
-	size_t size = min_t(size_t, 8, msg->size);
+	size_t size = min_t(size_t, DP_AUX_MAX_PAYLOAD_BYTES - 1, msg->size);
 	u8 request = msg->request & ~DP_AUX_I2C_MOT;
 	u8 *buf = msg->buffer;
 	u32 tmp = 0;
-- 
2.20.1

[PATCH AUTOSEL 4.9 02/19] video: ssd1307fb: Start page range at page_offset

[Sasha Levin]

From: Marko Kohtala <marko.kohtala@okoko.fi>

[ Upstream commit dd9782834dd9dde3624ff1acea8859f3d3e792d4 ]

The page_offset was only applied to the end of the page range. This caused
the display updates to cause a scrolling effect on the display because the
amount of data written to the display did not match the range display
expected.

Fixes: 301bc0675b67 ("video: ssd1307fb: Make use of horizontal addressing mode")
Signed-off-by: Marko Kohtala <marko.kohtala@okoko.fi>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618074111.9309-4-marko.kohtala@okoko.fi
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/ssd1307fb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c
index 2925d5ce8d3e5..1267b93c03bd0 100644
--- a/drivers/video/fbdev/ssd1307fb.c
+++ b/drivers/video/fbdev/ssd1307fb.c
@@ -430,7 +430,7 @@ static int ssd1307fb_init(struct ssd1307fb_par *par)
 	if (ret < 0)
 		return ret;
 
-	ret = ssd1307fb_write_cmd(par->client, 0x0);
+	ret = ssd1307fb_write_cmd(par->client, par->page_offset);
 	if (ret < 0)
 		return ret;
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 02/19] video: ssd1307fb: Start page range at page_offset

[Sasha Levin]

From: Marko Kohtala <marko.kohtala@okoko.fi>

[ Upstream commit dd9782834dd9dde3624ff1acea8859f3d3e792d4 ]

The page_offset was only applied to the end of the page range. This caused
the display updates to cause a scrolling effect on the display because the
amount of data written to the display did not match the range display
expected.

Fixes: 301bc0675b67 ("video: ssd1307fb: Make use of horizontal addressing mode")
Signed-off-by: Marko Kohtala <marko.kohtala@okoko.fi>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618074111.9309-4-marko.kohtala@okoko.fi
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/ssd1307fb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c
index 2925d5ce8d3e5..1267b93c03bd0 100644
--- a/drivers/video/fbdev/ssd1307fb.c
+++ b/drivers/video/fbdev/ssd1307fb.c
@@ -430,7 +430,7 @@ static int ssd1307fb_init(struct ssd1307fb_par *par)
 	if (ret < 0)
 		return ret;
 
-	ret = ssd1307fb_write_cmd(par->client, 0x0);
+	ret = ssd1307fb_write_cmd(par->client, par->page_offset);
 	if (ret < 0)
 		return ret;
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 02/19] video: ssd1307fb: Start page range at page_offset

[Sasha Levin]

From: Marko Kohtala <marko.kohtala@okoko.fi>

[ Upstream commit dd9782834dd9dde3624ff1acea8859f3d3e792d4 ]

The page_offset was only applied to the end of the page range. This caused
the display updates to cause a scrolling effect on the display because the
amount of data written to the display did not match the range display
expected.

Fixes: 301bc0675b67 ("video: ssd1307fb: Make use of horizontal addressing mode")
Signed-off-by: Marko Kohtala <marko.kohtala@okoko.fi>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618074111.9309-4-marko.kohtala@okoko.fi
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/video/fbdev/ssd1307fb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c
index 2925d5ce8d3e5..1267b93c03bd0 100644
--- a/drivers/video/fbdev/ssd1307fb.c
+++ b/drivers/video/fbdev/ssd1307fb.c
@@ -430,7 +430,7 @@ static int ssd1307fb_init(struct ssd1307fb_par *par)
 	if (ret < 0)
 		return ret;
 
-	ret = ssd1307fb_write_cmd(par->client, 0x0);
+	ret = ssd1307fb_write_cmd(par->client, par->page_offset);
 	if (ret < 0)
 		return ret;
 
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.9 03/19] drm/radeon: Fix EEH during kexec

[Sasha Levin]

From: KyleMahlkuch <kmahlkuc@linux.vnet.ibm.com>

[ Upstream commit 6f7fe9a93e6c09bf988c5059403f5f88e17e21e6 ]

During kexec some adapters hit an EEH since they are not properly
shut down in the radeon_pci_shutdown() function. Adding
radeon_suspend_kms() fixes this issue.

Signed-off-by: KyleMahlkuch <kmahlkuc@linux.vnet.ibm.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/radeon/radeon_drv.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index 30bd4a6a9d466..3ccf5b28b326e 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -366,11 +366,19 @@ radeon_pci_remove(struct pci_dev *pdev)
 static void
 radeon_pci_shutdown(struct pci_dev *pdev)
 {
+	struct drm_device *ddev = pci_get_drvdata(pdev);
+
 	/* if we are running in a VM, make sure the device
 	 * torn down properly on reboot/shutdown
 	 */
 	if (radeon_device_is_virtual())
 		radeon_pci_remove(pdev);
+
+	/* Some adapters need to be suspended before a
+	* shutdown occurs in order to prevent an error
+	* during kexec.
+	*/
+	radeon_suspend_kms(ddev, true, true, false);
 }
 
 static int radeon_pmops_suspend(struct device *dev)
-- 
2.20.1

[PATCH AUTOSEL 4.9 03/19] drm/radeon: Fix EEH during kexec

[Sasha Levin]

From: KyleMahlkuch <kmahlkuc@linux.vnet.ibm.com>

[ Upstream commit 6f7fe9a93e6c09bf988c5059403f5f88e17e21e6 ]

During kexec some adapters hit an EEH since they are not properly
shut down in the radeon_pci_shutdown() function. Adding
radeon_suspend_kms() fixes this issue.

Signed-off-by: KyleMahlkuch <kmahlkuc@linux.vnet.ibm.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/radeon/radeon_drv.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index 30bd4a6a9d466..3ccf5b28b326e 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -366,11 +366,19 @@ radeon_pci_remove(struct pci_dev *pdev)
 static void
 radeon_pci_shutdown(struct pci_dev *pdev)
 {
+	struct drm_device *ddev = pci_get_drvdata(pdev);
+
 	/* if we are running in a VM, make sure the device
 	 * torn down properly on reboot/shutdown
 	 */
 	if (radeon_device_is_virtual())
 		radeon_pci_remove(pdev);
+
+	/* Some adapters need to be suspended before a
+	* shutdown occurs in order to prevent an error
+	* during kexec.
+	*/
+	radeon_suspend_kms(ddev, true, true, false);
 }
 
 static int radeon_pmops_suspend(struct device *dev)
-- 
2.20.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 4.9 04/19] gpu: drm: radeon: Fix a possible null-pointer dereference in radeon_connector_set_property()

[Sasha Levin]

From: Jia-Ju Bai <baijiaju1990@gmail.com>

[ Upstream commit f3eb9b8f67bc28783eddc142ad805ebdc53d6339 ]

In radeon_connector_set_property(), there is an if statement on line 743
to check whether connector->encoder is NULL:
    if (connector->encoder)

When connector->encoder is NULL, it is used on line 755:
    if (connector->encoder->crtc)

Thus, a possible null-pointer dereference may occur.

To fix this bug, connector->encoder is checked before being used.

This bug is found by a static analysis tool STCheck written by us.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/radeon/radeon_connectors.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index c5e1aa5f1d8ea..efa875120071a 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -764,7 +764,7 @@ static int radeon_connector_set_property(struct drm_connector *connector, struct
 
 		radeon_encoder->output_csc = val;
 
-		if (connector->encoder->crtc) {
+		if (connector->encoder && connector->encoder->crtc) {
 			struct drm_crtc *crtc  = connector->encoder->crtc;
 			const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
 			struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
-- 
2.20.1

[PATCH AUTOSEL 4.9 04/19] gpu: drm: radeon: Fix a possible null-pointer dereference in radeon_connector_set_property()

[Sasha Levin]

From: Jia-Ju Bai <baijiaju1990@gmail.com>

[ Upstream commit f3eb9b8f67bc28783eddc142ad805ebdc53d6339 ]

In radeon_connector_set_property(), there is an if statement on line 743
to check whether connector->encoder is NULL:
    if (connector->encoder)

When connector->encoder is NULL, it is used on line 755:
    if (connector->encoder->crtc)

Thus, a possible null-pointer dereference may occur.

To fix this bug, connector->encoder is checked before being used.

This bug is found by a static analysis tool STCheck written by us.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/radeon/radeon_connectors.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index c5e1aa5f1d8ea..efa875120071a 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -764,7 +764,7 @@ static int radeon_connector_set_property(struct drm_connector *connector, struct
 
 		radeon_encoder->output_csc = val;
 
-		if (connector->encoder->crtc) {
+		if (connector->encoder && connector->encoder->crtc) {
 			struct drm_crtc *crtc  = connector->encoder->crtc;
 			const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
 			struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
-- 
2.20.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 4.9 05/19] ipmi_si: Only schedule continuously in the thread in maintenance mode

[Sasha Levin]

From: Corey Minyard <cminyard@mvista.com>

[ Upstream commit 340ff31ab00bca5c15915e70ad9ada3030c98cf8 ]

ipmi_thread() uses back-to-back schedule() to poll for command
completion which, on some machines, can push up CPU consumption and
heavily tax the scheduler locks leading to noticeable overall
performance degradation.

This was originally added so firmware updates through IPMI would
complete in a timely manner.  But we can't kill the scheduler
locks for that one use case.

Instead, only run schedule() continuously in maintenance mode,
where firmware updates should run.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/char/ipmi/ipmi_si_intf.c | 24 +++++++++++++++++++-----
 1 file changed, 19 insertions(+), 5 deletions(-)

diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index e0a53156b782f..82af658184444 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -283,6 +283,9 @@ struct smi_info {
 	 */
 	bool irq_enable_broken;
 
+	/* Is the driver in maintenance mode? */
+	bool in_maintenance_mode;
+
 	/*
 	 * Did we get an attention that we did not handle?
 	 */
@@ -1093,11 +1096,20 @@ static int ipmi_thread(void *data)
 		spin_unlock_irqrestore(&(smi_info->si_lock), flags);
 		busy_wait = ipmi_thread_busy_wait(smi_result, smi_info,
 						  &busy_until);
-		if (smi_result == SI_SM_CALL_WITHOUT_DELAY)
+		if (smi_result == SI_SM_CALL_WITHOUT_DELAY) {
 			; /* do nothing */
-		else if (smi_result == SI_SM_CALL_WITH_DELAY && busy_wait)
-			schedule();
-		else if (smi_result == SI_SM_IDLE) {
+		} else if (smi_result == SI_SM_CALL_WITH_DELAY && busy_wait) {
+			/*
+			 * In maintenance mode we run as fast as
+			 * possible to allow firmware updates to
+			 * complete as fast as possible, but normally
+			 * don't bang on the scheduler.
+			 */
+			if (smi_info->in_maintenance_mode)
+				schedule();
+			else
+				usleep_range(100, 200);
+		} else if (smi_result == SI_SM_IDLE) {
 			if (atomic_read(&smi_info->need_watch)) {
 				schedule_timeout_interruptible(100);
 			} else {
@@ -1105,8 +1117,9 @@ static int ipmi_thread(void *data)
 				__set_current_state(TASK_INTERRUPTIBLE);
 				schedule();
 			}
-		} else
+		} else {
 			schedule_timeout_interruptible(1);
+		}
 	}
 	return 0;
 }
@@ -1285,6 +1298,7 @@ static void set_maintenance_mode(void *send_info, bool enable)
 
 	if (!enable)
 		atomic_set(&smi_info->req_events, 0);
+	smi_info->in_maintenance_mode = enable;
 }
 
 static const struct ipmi_smi_handlers handlers = {
-- 
2.20.1

[PATCH AUTOSEL 4.9 06/19] clk: qoriq: Fix -Wunused-const-variable

[Sasha Levin]

From: Nathan Huckleberry <nhuck@google.com>

[ Upstream commit a95fb581b144b5e73da382eaedb2e32027610597 ]

drivers/clk/clk-qoriq.c:138:38: warning: unused variable
'p5020_cmux_grp1' [-Wunused-const-variable] static const struct
clockgen_muxinfo p5020_cmux_grp1

drivers/clk/clk-qoriq.c:146:38: warning: unused variable
'p5020_cmux_grp2' [-Wunused-const-variable] static const struct
clockgen_muxinfo p5020_cmux_grp2

In the definition of the p5020 chip, the p2041 chip's info was used
instead.  The p5020 and p2041 chips have different info. This is most
likely a typo.

Link: https://github.com/ClangBuiltLinux/linux/issues/525
Cc: clang-built-linux@googlegroups.com
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Link: https://lkml.kernel.org/r/20190627220642.78575-1-nhuck@google.com
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/clk-qoriq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c
index 80ae2a51452d7..cdce49f6476aa 100644
--- a/drivers/clk/clk-qoriq.c
+++ b/drivers/clk/clk-qoriq.c
@@ -540,7 +540,7 @@ static const struct clockgen_chipinfo chipinfo[] = {
 		.guts_compat = "fsl,qoriq-device-config-1.0",
 		.init_periph = p5020_init_periph,
 		.cmux_groups = {
-			&p2041_cmux_grp1, &p2041_cmux_grp2
+			&p5020_cmux_grp1, &p5020_cmux_grp2
 		},
 		.cmux_to_group = {
 			0, 1, -1
-- 
2.20.1

[PATCH AUTOSEL 4.9 07/19] drm/amd/powerplay/smu7: enforce minimal VBITimeout (v2)

[Sasha Levin]

From: Ahzo <Ahzo@tutanota.com>

[ Upstream commit f659bb6dae58c113805f92822e4c16ddd3156b79 ]

This fixes screen corruption/flickering on 75 Hz displays.

v2: make print statement debug only (Alex)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102646
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Ahzo <Ahzo@tutanota.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c
index 3907439417e76..c0db3b57dfe58 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c
@@ -3739,6 +3739,11 @@ int smu7_program_display_gap(struct pp_hwmgr *hwmgr)
 
 	data->frame_time_x2 = frame_time_in_us * 2 / 100;
 
+	if (data->frame_time_x2 < 280) {
+		pr_debug("%s: enforce minimal VBITimeout: %d -> 280\n", __func__, data->frame_time_x2);
+		data->frame_time_x2 = 280;
+	}
+
 	display_gap2 = pre_vbi_time_in_us * (ref_clock / 100);
 
 	cgs_write_ind_register(hwmgr->device, CGS_IND_REG__SMC, ixCG_DISPLAY_GAP_CNTL2, display_gap2);
-- 
2.20.1

[PATCH AUTOSEL 4.9 07/19] drm/amd/powerplay/smu7: enforce minimal VBITimeout (v2)

[Sasha Levin]

From: Ahzo <Ahzo@tutanota.com>

[ Upstream commit f659bb6dae58c113805f92822e4c16ddd3156b79 ]

This fixes screen corruption/flickering on 75 Hz displays.

v2: make print statement debug only (Alex)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102646
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Ahzo <Ahzo@tutanota.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c
index 3907439417e76..c0db3b57dfe58 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c
@@ -3739,6 +3739,11 @@ int smu7_program_display_gap(struct pp_hwmgr *hwmgr)
 
 	data->frame_time_x2 = frame_time_in_us * 2 / 100;
 
+	if (data->frame_time_x2 < 280) {
+		pr_debug("%s: enforce minimal VBITimeout: %d -> 280\n", __func__, data->frame_time_x2);
+		data->frame_time_x2 = 280;
+	}
+
 	display_gap2 = pre_vbi_time_in_us * (ref_clock / 100);
 
 	cgs_write_ind_register(hwmgr->device, CGS_IND_REG__SMC, ixCG_DISPLAY_GAP_CNTL2, display_gap2);
-- 
2.20.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 4.9 08/19] clk: sirf: Don't reference clk_init_data after registration

[Sasha Levin]

From: Stephen Boyd <sboyd@kernel.org>

[ Upstream commit af55dadfbce35b4f4c6247244ce3e44b2e242b84 ]

A future patch is going to change semantics of clk_register() so that
clk_hw::init is guaranteed to be NULL after a clk is registered. Avoid
referencing this member here so that we don't run into NULL pointer
exceptions.

Cc: Guo Zeng <Guo.Zeng@csr.com>
Cc: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190731193517.237136-6-sboyd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/sirf/clk-common.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/sirf/clk-common.c b/drivers/clk/sirf/clk-common.c
index 77e1e2491689b..edb7197cc4b4d 100644
--- a/drivers/clk/sirf/clk-common.c
+++ b/drivers/clk/sirf/clk-common.c
@@ -298,9 +298,10 @@ static u8 dmn_clk_get_parent(struct clk_hw *hw)
 {
 	struct clk_dmn *clk = to_dmnclk(hw);
 	u32 cfg = clkc_readl(clk->regofs);
+	const char *name = clk_hw_get_name(hw);
 
 	/* parent of io domain can only be pll3 */
-	if (strcmp(hw->init->name, "io") == 0)
+	if (strcmp(name, "io") == 0)
 		return 4;
 
 	WARN_ON((cfg & (BIT(3) - 1)) > 4);
@@ -312,9 +313,10 @@ static int dmn_clk_set_parent(struct clk_hw *hw, u8 parent)
 {
 	struct clk_dmn *clk = to_dmnclk(hw);
 	u32 cfg = clkc_readl(clk->regofs);
+	const char *name = clk_hw_get_name(hw);
 
 	/* parent of io domain can only be pll3 */
-	if (strcmp(hw->init->name, "io") == 0)
+	if (strcmp(name, "io") == 0)
 		return -EINVAL;
 
 	cfg &= ~(BIT(3) - 1);
@@ -354,7 +356,8 @@ static long dmn_clk_round_rate(struct clk_hw *hw, unsigned long rate,
 {
 	unsigned long fin;
 	unsigned ratio, wait, hold;
-	unsigned bits = (strcmp(hw->init->name, "mem") == 0) ? 3 : 4;
+	const char *name = clk_hw_get_name(hw);
+	unsigned bits = (strcmp(name, "mem") == 0) ? 3 : 4;
 
 	fin = *parent_rate;
 	ratio = fin / rate;
@@ -376,7 +379,8 @@ static int dmn_clk_set_rate(struct clk_hw *hw, unsigned long rate,
 	struct clk_dmn *clk = to_dmnclk(hw);
 	unsigned long fin;
 	unsigned ratio, wait, hold, reg;
-	unsigned bits = (strcmp(hw->init->name, "mem") == 0) ? 3 : 4;
+	const char *name = clk_hw_get_name(hw);
+	unsigned bits = (strcmp(name, "mem") == 0) ? 3 : 4;
 
 	fin = parent_rate;
 	ratio = fin / rate;
-- 
2.20.1

[PATCH AUTOSEL 4.9 09/19] powerpc/rtas: use device model APIs and serialization during LPM

[Sasha Levin]

From: Nathan Lynch <nathanl@linux.ibm.com>

[ Upstream commit a6717c01ddc259f6f73364779df058e2c67309f8 ]

The LPAR migration implementation and userspace-initiated cpu hotplug
can interleave their executions like so:

1. Set cpu 7 offline via sysfs.

2. Begin a partition migration, whose implementation requires the OS
   to ensure all present cpus are online; cpu 7 is onlined:

     rtas_ibm_suspend_me -> rtas_online_cpus_mask -> cpu_up

   This sets cpu 7 online in all respects except for the cpu's
   corresponding struct device; dev->offline remains true.

3. Set cpu 7 online via sysfs. _cpu_up() determines that cpu 7 is
   already online and returns success. The driver core (device_online)
   sets dev->offline = false.

4. The migration completes and restores cpu 7 to offline state:

     rtas_ibm_suspend_me -> rtas_offline_cpus_mask -> cpu_down

This leaves cpu7 in a state where the driver core considers the cpu
device online, but in all other respects it is offline and
unused. Attempts to online the cpu via sysfs appear to succeed but the
driver core actually does not pass the request to the lower-level
cpuhp support code. This makes the cpu unusable until the cpu device
is manually set offline and then online again via sysfs.

Instead of directly calling cpu_up/cpu_down, the migration code should
use the higher-level device core APIs to maintain consistent state and
serialize operations.

Fixes: 120496ac2d2d ("powerpc: Bring all threads online prior to migration/hibernation")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190802192926.19277-2-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/rtas.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 6a3e5de544ce2..a309a7a29cc60 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -874,15 +874,17 @@ static int rtas_cpu_state_change_mask(enum rtas_cpu_state state,
 		return 0;
 
 	for_each_cpu(cpu, cpus) {
+		struct device *dev = get_cpu_device(cpu);
+
 		switch (state) {
 		case DOWN:
-			cpuret = cpu_down(cpu);
+			cpuret = device_offline(dev);
 			break;
 		case UP:
-			cpuret = cpu_up(cpu);
+			cpuret = device_online(dev);
 			break;
 		}
-		if (cpuret) {
+		if (cpuret < 0) {
 			pr_debug("%s: cpu_%s for cpu#%d returned %d.\n",
 					__func__,
 					((state == UP) ? "up" : "down"),
@@ -971,6 +973,8 @@ int rtas_ibm_suspend_me(u64 handle)
 	data.token = rtas_token("ibm,suspend-me");
 	data.complete = &done;
 
+	lock_device_hotplug();
+
 	/* All present CPUs must be online */
 	cpumask_andnot(offline_mask, cpu_present_mask, cpu_online_mask);
 	cpuret = rtas_online_cpus_mask(offline_mask);
@@ -1002,6 +1006,7 @@ int rtas_ibm_suspend_me(u64 handle)
 				__func__);
 
 out:
+	unlock_device_hotplug();
 	free_cpumask_var(offline_mask);
 	return atomic_read(&data.error);
 }
-- 
2.20.1

[PATCH AUTOSEL 4.9 09/19] powerpc/rtas: use device model APIs and serialization during LPM

[Sasha Levin]

From: Nathan Lynch <nathanl@linux.ibm.com>

[ Upstream commit a6717c01ddc259f6f73364779df058e2c67309f8 ]

The LPAR migration implementation and userspace-initiated cpu hotplug
can interleave their executions like so:

1. Set cpu 7 offline via sysfs.

2. Begin a partition migration, whose implementation requires the OS
   to ensure all present cpus are online; cpu 7 is onlined:

     rtas_ibm_suspend_me -> rtas_online_cpus_mask -> cpu_up

   This sets cpu 7 online in all respects except for the cpu's
   corresponding struct device; dev->offline remains true.

3. Set cpu 7 online via sysfs. _cpu_up() determines that cpu 7 is
   already online and returns success. The driver core (device_online)
   sets dev->offline = false.

4. The migration completes and restores cpu 7 to offline state:

     rtas_ibm_suspend_me -> rtas_offline_cpus_mask -> cpu_down

This leaves cpu7 in a state where the driver core considers the cpu
device online, but in all other respects it is offline and
unused. Attempts to online the cpu via sysfs appear to succeed but the
driver core actually does not pass the request to the lower-level
cpuhp support code. This makes the cpu unusable until the cpu device
is manually set offline and then online again via sysfs.

Instead of directly calling cpu_up/cpu_down, the migration code should
use the higher-level device core APIs to maintain consistent state and
serialize operations.

Fixes: 120496ac2d2d ("powerpc: Bring all threads online prior to migration/hibernation")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190802192926.19277-2-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/rtas.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 6a3e5de544ce2..a309a7a29cc60 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -874,15 +874,17 @@ static int rtas_cpu_state_change_mask(enum rtas_cpu_state state,
 		return 0;
 
 	for_each_cpu(cpu, cpus) {
+		struct device *dev = get_cpu_device(cpu);
+
 		switch (state) {
 		case DOWN:
-			cpuret = cpu_down(cpu);
+			cpuret = device_offline(dev);
 			break;
 		case UP:
-			cpuret = cpu_up(cpu);
+			cpuret = device_online(dev);
 			break;
 		}
-		if (cpuret) {
+		if (cpuret < 0) {
 			pr_debug("%s: cpu_%s for cpu#%d returned %d.\n",
 					__func__,
 					((state == UP) ? "up" : "down"),
@@ -971,6 +973,8 @@ int rtas_ibm_suspend_me(u64 handle)
 	data.token = rtas_token("ibm,suspend-me");
 	data.complete = &done;
 
+	lock_device_hotplug();
+
 	/* All present CPUs must be online */
 	cpumask_andnot(offline_mask, cpu_present_mask, cpu_online_mask);
 	cpuret = rtas_online_cpus_mask(offline_mask);
@@ -1002,6 +1006,7 @@ int rtas_ibm_suspend_me(u64 handle)
 				__func__);
 
 out:
+	unlock_device_hotplug();
 	free_cpumask_var(offline_mask);
 	return atomic_read(&data.error);
 }
-- 
2.20.1

[PATCH AUTOSEL 4.9 10/19] powerpc/futex: Fix warning: 'oldval' may be used uninitialized in this function

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@c-s.fr>

[ Upstream commit 38a0d0cdb46d3f91534e5b9839ec2d67be14c59d ]

We see warnings such as:
  kernel/futex.c: In function 'do_futex':
  kernel/futex.c:1676:17: warning: 'oldval' may be used uninitialized in this function [-Wmaybe-uninitialized]
     return oldval == cmparg;
                   ^
  kernel/futex.c:1651:6: note: 'oldval' was declared here
    int oldval, ret;
        ^

This is because arch_futex_atomic_op_inuser() only sets *oval if ret
is 0 and GCC doesn't see that it will only use it when ret is 0.

Anyway, the non-zero ret path is an error path that won't suffer from
setting *oval, and as *oval is a local var in futex_atomic_op_inuser()
it will have no impact.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: reword change log slightly]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/86b72f0c134367b214910b27b9a6dd3321af93bb.1565774657.git.christophe.leroy@c-s.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/futex.h | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/powerpc/include/asm/futex.h b/arch/powerpc/include/asm/futex.h
index f4c7467f74655..b73ab8a7ebc3f 100644
--- a/arch/powerpc/include/asm/futex.h
+++ b/arch/powerpc/include/asm/futex.h
@@ -60,8 +60,7 @@ static inline int arch_futex_atomic_op_inuser(int op, int oparg, int *oval,
 
 	pagefault_enable();
 
-	if (!ret)
-		*oval = oldval;
+	*oval = oldval;
 
 	return ret;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.9 10/19] powerpc/futex: Fix warning: 'oldval' may be used uninitialized in this function

[Sasha Levin]

From: Christophe Leroy <christophe.leroy@c-s.fr>

[ Upstream commit 38a0d0cdb46d3f91534e5b9839ec2d67be14c59d ]

We see warnings such as:
  kernel/futex.c: In function 'do_futex':
  kernel/futex.c:1676:17: warning: 'oldval' may be used uninitialized in this function [-Wmaybe-uninitialized]
     return oldval == cmparg;
                   ^
  kernel/futex.c:1651:6: note: 'oldval' was declared here
    int oldval, ret;
        ^

This is because arch_futex_atomic_op_inuser() only sets *oval if ret
is 0 and GCC doesn't see that it will only use it when ret is 0.

Anyway, the non-zero ret path is an error path that won't suffer from
setting *oval, and as *oval is a local var in futex_atomic_op_inuser()
it will have no impact.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[mpe: reword change log slightly]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/86b72f0c134367b214910b27b9a6dd3321af93bb.1565774657.git.christophe.leroy@c-s.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/include/asm/futex.h | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/powerpc/include/asm/futex.h b/arch/powerpc/include/asm/futex.h
index f4c7467f74655..b73ab8a7ebc3f 100644
--- a/arch/powerpc/include/asm/futex.h
+++ b/arch/powerpc/include/asm/futex.h
@@ -60,8 +60,7 @@ static inline int arch_futex_atomic_op_inuser(int op, int oparg, int *oval,
 
 	pagefault_enable();
 
-	if (!ret)
-		*oval = oldval;
+	*oval = oldval;
 
 	return ret;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.9 11/19] powerpc/pseries/mobility: use cond_resched when updating device tree

[Sasha Levin]

From: Nathan Lynch <nathanl@linux.ibm.com>

[ Upstream commit ccfb5bd71d3d1228090a8633800ae7cdf42a94ac ]

After a partition migration, pseries_devicetree_update() processes
changes to the device tree communicated from the platform to
Linux. This is a relatively heavyweight operation, with multiple
device tree searches, memory allocations, and conversations with
partition firmware.

There's a few levels of nested loops which are bounded only by
decisions made by the platform, outside of Linux's control, and indeed
we have seen RCU stalls on large systems while executing this call
graph. Use cond_resched() in these loops so that the cpu is yielded
when needed.

Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190802192926.19277-4-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/pseries/mobility.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/powerpc/platforms/pseries/mobility.c b/arch/powerpc/platforms/pseries/mobility.c
index 3784a7abfcc80..74791e8382d22 100644
--- a/arch/powerpc/platforms/pseries/mobility.c
+++ b/arch/powerpc/platforms/pseries/mobility.c
@@ -11,6 +11,7 @@
 
 #include <linux/kernel.h>
 #include <linux/kobject.h>
+#include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/stat.h>
 #include <linux/completion.h>
@@ -206,7 +207,11 @@ static int update_dt_node(__be32 phandle, s32 scope)
 
 				prop_data += vd;
 			}
+
+			cond_resched();
 		}
+
+		cond_resched();
 	} while (rtas_rc == 1);
 
 	of_node_put(dn);
@@ -282,8 +287,12 @@ int pseries_devicetree_update(s32 scope)
 					add_dt_node(phandle, drc_index);
 					break;
 				}
+
+				cond_resched();
 			}
 		}
+
+		cond_resched();
 	} while (rc == 1);
 
 	kfree(rtas_buf);
-- 
2.20.1

[PATCH AUTOSEL 4.9 11/19] powerpc/pseries/mobility: use cond_resched when updating device tree

[Sasha Levin]

From: Nathan Lynch <nathanl@linux.ibm.com>

[ Upstream commit ccfb5bd71d3d1228090a8633800ae7cdf42a94ac ]

After a partition migration, pseries_devicetree_update() processes
changes to the device tree communicated from the platform to
Linux. This is a relatively heavyweight operation, with multiple
device tree searches, memory allocations, and conversations with
partition firmware.

There's a few levels of nested loops which are bounded only by
decisions made by the platform, outside of Linux's control, and indeed
we have seen RCU stalls on large systems while executing this call
graph. Use cond_resched() in these loops so that the cpu is yielded
when needed.

Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190802192926.19277-4-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/pseries/mobility.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/powerpc/platforms/pseries/mobility.c b/arch/powerpc/platforms/pseries/mobility.c
index 3784a7abfcc80..74791e8382d22 100644
--- a/arch/powerpc/platforms/pseries/mobility.c
+++ b/arch/powerpc/platforms/pseries/mobility.c
@@ -11,6 +11,7 @@
 
 #include <linux/kernel.h>
 #include <linux/kobject.h>
+#include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/stat.h>
 #include <linux/completion.h>
@@ -206,7 +207,11 @@ static int update_dt_node(__be32 phandle, s32 scope)
 
 				prop_data += vd;
 			}
+
+			cond_resched();
 		}
+
+		cond_resched();
 	} while (rtas_rc == 1);
 
 	of_node_put(dn);
@@ -282,8 +287,12 @@ int pseries_devicetree_update(s32 scope)
 					add_dt_node(phandle, drc_index);
 					break;
 				}
+
+				cond_resched();
 			}
 		}
+
+		cond_resched();
 	} while (rc == 1);
 
 	kfree(rtas_buf);
-- 
2.20.1

[PATCH AUTOSEL 4.9 12/19] pinctrl: tegra: Fix write barrier placement in pmx_writel

[Sasha Levin]

From: Sowjanya Komatineni <skomatineni@nvidia.com>

[ Upstream commit c2cf351eba2ff6002ce8eb178452219d2521e38e ]

pmx_writel uses writel which inserts write barrier before the
register write.

This patch has fix to replace writel with writel_relaxed followed
by a readback and memory barrier to ensure write operation is
completed for successful pinctrl change.

Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Link: https://lore.kernel.org/r/1565984527-5272-2-git-send-email-skomatineni@nvidia.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/tegra/pinctrl-tegra.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/tegra/pinctrl-tegra.c b/drivers/pinctrl/tegra/pinctrl-tegra.c
index 277622b4b6fb9..1d9f63e954c71 100644
--- a/drivers/pinctrl/tegra/pinctrl-tegra.c
+++ b/drivers/pinctrl/tegra/pinctrl-tegra.c
@@ -52,7 +52,9 @@ static inline u32 pmx_readl(struct tegra_pmx *pmx, u32 bank, u32 reg)
 
 static inline void pmx_writel(struct tegra_pmx *pmx, u32 val, u32 bank, u32 reg)
 {
-	writel(val, pmx->regs[bank] + reg);
+	writel_relaxed(val, pmx->regs[bank] + reg);
+	/* make sure pinmux register write completed */
+	pmx_readl(pmx, bank, reg);
 }
 
 static int tegra_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
-- 
2.20.1

[PATCH AUTOSEL 4.9 13/19] vfio_pci: Restore original state on release

[Sasha Levin]

From: hexin <hexin.op@gmail.com>

[ Upstream commit 92c8026854c25093946e0d7fe536fd9eac440f06 ]

vfio_pci_enable() saves the device's initial configuration information
with the intent that it is restored in vfio_pci_disable().  However,
the commit referenced in Fixes: below replaced the call to
__pci_reset_function_locked(), which is not wrapped in a state save
and restore, with pci_try_reset_function(), which overwrites the
restored device state with the current state before applying it to the
device.  Reinstate use of __pci_reset_function_locked() to return to
the desired behavior.

Fixes: 890ed578df82 ("vfio-pci: Use pci "try" reset interface")
Signed-off-by: hexin <hexin15@baidu.com>
Signed-off-by: Liu Qi <liuqi16@baidu.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/vfio/pci/vfio_pci.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
index f9a75df2d22d1..a1a712d18e028 100644
--- a/drivers/vfio/pci/vfio_pci.c
+++ b/drivers/vfio/pci/vfio_pci.c
@@ -356,11 +356,20 @@ static void vfio_pci_disable(struct vfio_pci_device *vdev)
 	pci_write_config_word(pdev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE);
 
 	/*
-	 * Try to reset the device.  The success of this is dependent on
-	 * being able to lock the device, which is not always possible.
+	 * Try to get the locks ourselves to prevent a deadlock. The
+	 * success of this is dependent on being able to lock the device,
+	 * which is not always possible.
+	 * We can not use the "try" reset interface here, which will
+	 * overwrite the previously restored configuration information.
 	 */
-	if (vdev->reset_works && !pci_try_reset_function(pdev))
-		vdev->needs_reset = false;
+	if (vdev->reset_works && pci_cfg_access_trylock(pdev)) {
+		if (device_trylock(&pdev->dev)) {
+			if (!__pci_reset_function_locked(pdev))
+				vdev->needs_reset = false;
+			device_unlock(&pdev->dev);
+		}
+		pci_cfg_access_unlock(pdev);
+	}
 
 	pci_restore_state(pdev);
 out:
-- 
2.20.1

[PATCH AUTOSEL 4.9 14/19] drm/amdgpu/si: fix ASIC tests

[Sasha Levin]

From: Jean Delvare <jdelvare@suse.de>

[ Upstream commit 77efe48a729588527afb4d5811b9e0acb29f5e51 ]

Comparing adev->family with CHIP constants is not correct.
adev->family can only be compared with AMDGPU_FAMILY constants and
adev->asic_type is the struct member to compare with CHIP constants.
They are separate identification spaces.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 62a37553414a ("drm/amdgpu: add si implementation v10")
Cc: Ken Wang <Qingqing.Wang@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/si.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/si.c b/drivers/gpu/drm/amd/amdgpu/si.c
index 327bdf13e8bc8..b0beb5e537bcb 100644
--- a/drivers/gpu/drm/amd/amdgpu/si.c
+++ b/drivers/gpu/drm/amd/amdgpu/si.c
@@ -1606,7 +1606,7 @@ static void si_program_aspm(struct amdgpu_device *adev)
 			if (orig != data)
 				si_pif_phy1_wreg(adev,PB1_PIF_PWRDOWN_1, data);
 
-			if ((adev->family != CHIP_OLAND) && (adev->family != CHIP_HAINAN)) {
+			if ((adev->asic_type != CHIP_OLAND) && (adev->asic_type != CHIP_HAINAN)) {
 				orig = data = si_pif_phy0_rreg(adev,PB0_PIF_PWRDOWN_0);
 				data &= ~PLL_RAMP_UP_TIME_0_MASK;
 				if (orig != data)
@@ -1655,14 +1655,14 @@ static void si_program_aspm(struct amdgpu_device *adev)
 
 			orig = data = si_pif_phy0_rreg(adev,PB0_PIF_CNTL);
 			data &= ~LS2_EXIT_TIME_MASK;
-			if ((adev->family == CHIP_OLAND) || (adev->family == CHIP_HAINAN))
+			if ((adev->asic_type == CHIP_OLAND) || (adev->asic_type == CHIP_HAINAN))
 				data |= LS2_EXIT_TIME(5);
 			if (orig != data)
 				si_pif_phy0_wreg(adev,PB0_PIF_CNTL, data);
 
 			orig = data = si_pif_phy1_rreg(adev,PB1_PIF_CNTL);
 			data &= ~LS2_EXIT_TIME_MASK;
-			if ((adev->family == CHIP_OLAND) || (adev->family == CHIP_HAINAN))
+			if ((adev->asic_type == CHIP_OLAND) || (adev->asic_type == CHIP_HAINAN))
 				data |= LS2_EXIT_TIME(5);
 			if (orig != data)
 				si_pif_phy1_wreg(adev,PB1_PIF_CNTL, data);
-- 
2.20.1

[PATCH AUTOSEL 4.9 14/19] drm/amdgpu/si: fix ASIC tests

[Sasha Levin]

From: Jean Delvare <jdelvare@suse.de>

[ Upstream commit 77efe48a729588527afb4d5811b9e0acb29f5e51 ]

Comparing adev->family with CHIP constants is not correct.
adev->family can only be compared with AMDGPU_FAMILY constants and
adev->asic_type is the struct member to compare with CHIP constants.
They are separate identification spaces.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 62a37553414a ("drm/amdgpu: add si implementation v10")
Cc: Ken Wang <Qingqing.Wang@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/si.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/si.c b/drivers/gpu/drm/amd/amdgpu/si.c
index 327bdf13e8bc8..b0beb5e537bcb 100644
--- a/drivers/gpu/drm/amd/amdgpu/si.c
+++ b/drivers/gpu/drm/amd/amdgpu/si.c
@@ -1606,7 +1606,7 @@ static void si_program_aspm(struct amdgpu_device *adev)
 			if (orig != data)
 				si_pif_phy1_wreg(adev,PB1_PIF_PWRDOWN_1, data);
 
-			if ((adev->family != CHIP_OLAND) && (adev->family != CHIP_HAINAN)) {
+			if ((adev->asic_type != CHIP_OLAND) && (adev->asic_type != CHIP_HAINAN)) {
 				orig = data = si_pif_phy0_rreg(adev,PB0_PIF_PWRDOWN_0);
 				data &= ~PLL_RAMP_UP_TIME_0_MASK;
 				if (orig != data)
@@ -1655,14 +1655,14 @@ static void si_program_aspm(struct amdgpu_device *adev)
 
 			orig = data = si_pif_phy0_rreg(adev,PB0_PIF_CNTL);
 			data &= ~LS2_EXIT_TIME_MASK;
-			if ((adev->family == CHIP_OLAND) || (adev->family == CHIP_HAINAN))
+			if ((adev->asic_type == CHIP_OLAND) || (adev->asic_type == CHIP_HAINAN))
 				data |= LS2_EXIT_TIME(5);
 			if (orig != data)
 				si_pif_phy0_wreg(adev,PB0_PIF_CNTL, data);
 
 			orig = data = si_pif_phy1_rreg(adev,PB1_PIF_CNTL);
 			data &= ~LS2_EXIT_TIME_MASK;
-			if ((adev->family == CHIP_OLAND) || (adev->family == CHIP_HAINAN))
+			if ((adev->asic_type == CHIP_OLAND) || (adev->asic_type == CHIP_HAINAN))
 				data |= LS2_EXIT_TIME(5);
 			if (orig != data)
 				si_pif_phy1_wreg(adev,PB1_PIF_CNTL, data);
-- 
2.20.1

_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx

[PATCH AUTOSEL 4.9 15/19] powerpc/64s/exception: machine check use correct cfar for late handler

[Sasha Levin]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit 0b66370c61fcf5fcc1d6901013e110284da6e2bb ]

Bare metal machine checks run an "early" handler in real mode before
running the main handler which reports the event.

The main handler runs exactly as a normal interrupt handler, after the
"windup" which sets registers back as they were at interrupt entry.
CFAR does not get restored by the windup code, so that will be wrong
when the handler is run.

Restore the CFAR to the saved value before running the late handler.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190802105709.27696-8-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/exceptions-64s.S | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 92474227262b4..0c8b966e80702 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -467,6 +467,10 @@ EXC_COMMON_BEGIN(machine_check_handle_early)
 	RFI_TO_USER_OR_KERNEL
 9:
 	/* Deliver the machine check to host kernel in V mode. */
+BEGIN_FTR_SECTION
+	ld	r10,ORIG_GPR3(r1)
+	mtspr	SPRN_CFAR,r10
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
 	MACHINE_CHECK_HANDLER_WINDUP
 	b	machine_check_pSeries
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 15/19] powerpc/64s/exception: machine check use correct cfar for late handler

[Sasha Levin]

From: Nicholas Piggin <npiggin@gmail.com>

[ Upstream commit 0b66370c61fcf5fcc1d6901013e110284da6e2bb ]

Bare metal machine checks run an "early" handler in real mode before
running the main handler which reports the event.

The main handler runs exactly as a normal interrupt handler, after the
"windup" which sets registers back as they were at interrupt entry.
CFAR does not get restored by the windup code, so that will be wrong
when the handler is run.

Restore the CFAR to the saved value before running the late handler.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190802105709.27696-8-npiggin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/exceptions-64s.S | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 92474227262b4..0c8b966e80702 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -467,6 +467,10 @@ EXC_COMMON_BEGIN(machine_check_handle_early)
 	RFI_TO_USER_OR_KERNEL
 9:
 	/* Deliver the machine check to host kernel in V mode. */
+BEGIN_FTR_SECTION
+	ld	r10,ORIG_GPR3(r1)
+	mtspr	SPRN_CFAR,r10
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
 	MACHINE_CHECK_HANDLER_WINDUP
 	b	machine_check_pSeries
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 16/19] powerpc/pseries: correctly track irq state in default idle

[Sasha Levin]

From: Nathan Lynch <nathanl@linux.ibm.com>

[ Upstream commit 92c94dfb69e350471473fd3075c74bc68150879e ]

prep_irq_for_idle() is intended to be called before entering
H_CEDE (and it is used by the pseries cpuidle driver). However the
default pseries idle routine does not call it, leading to mismanaged
lazy irq state when the cpuidle driver isn't in use. Manifestations of
this include:

* Dropped IPIs in the time immediately after a cpu comes
  online (before it has installed the cpuidle handler), making the
  online operation block indefinitely waiting for the new cpu to
  respond.

* Hitting this WARN_ON in arch_local_irq_restore():
	/*
	 * We should already be hard disabled here. We had bugs
	 * where that wasn't the case so let's dbl check it and
	 * warn if we are wrong. Only do that when IRQ tracing
	 * is enabled as mfmsr() can be costly.
	 */
	if (WARN_ON_ONCE(mfmsr() & MSR_EE))
		__hard_irq_disable();

Call prep_irq_for_idle() from pseries_lpar_idle() and honor its
result.

Fixes: 363edbe2614a ("powerpc: Default arch idle could cede processor on pseries")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190910225244.25056-1-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/pseries/setup.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index adb09ab87f7c0..30782859d8980 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -298,6 +298,9 @@ static void pseries_lpar_idle(void)
 	 * low power mode by ceding processor to hypervisor
 	 */
 
+	if (!prep_irq_for_idle())
+		return;
+
 	/* Indicate to hypervisor that we are idle. */
 	get_lppaca()->idle = 1;
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 16/19] powerpc/pseries: correctly track irq state in default idle

[Sasha Levin]

From: Nathan Lynch <nathanl@linux.ibm.com>

[ Upstream commit 92c94dfb69e350471473fd3075c74bc68150879e ]

prep_irq_for_idle() is intended to be called before entering
H_CEDE (and it is used by the pseries cpuidle driver). However the
default pseries idle routine does not call it, leading to mismanaged
lazy irq state when the cpuidle driver isn't in use. Manifestations of
this include:

* Dropped IPIs in the time immediately after a cpu comes
  online (before it has installed the cpuidle handler), making the
  online operation block indefinitely waiting for the new cpu to
  respond.

* Hitting this WARN_ON in arch_local_irq_restore():
	/*
	 * We should already be hard disabled here. We had bugs
	 * where that wasn't the case so let's dbl check it and
	 * warn if we are wrong. Only do that when IRQ tracing
	 * is enabled as mfmsr() can be costly.
	 */
	if (WARN_ON_ONCE(mfmsr() & MSR_EE))
		__hard_irq_disable();

Call prep_irq_for_idle() from pseries_lpar_idle() and honor its
result.

Fixes: 363edbe2614a ("powerpc: Default arch idle could cede processor on pseries")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190910225244.25056-1-nathanl@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/platforms/pseries/setup.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index adb09ab87f7c0..30782859d8980 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -298,6 +298,9 @@ static void pseries_lpar_idle(void)
 	 * low power mode by ceding processor to hypervisor
 	 */
 
+	if (!prep_irq_for_idle())
+		return;
+
 	/* Indicate to hypervisor that we are idle. */
 	get_lppaca()->idle = 1;
 
-- 
2.20.1

[PATCH AUTOSEL 4.9 17/19] arm64: fix unreachable code issue with cmpxchg

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 920fdab7b3ce98c14c840261e364f490f3679a62 ]

On arm64 build with clang, sometimes the __cmpxchg_mb is not inlined
when CONFIG_OPTIMIZE_INLINING is set.
Clang then fails a compile-time assertion, because it cannot tell at
compile time what the size of the argument is:

mm/memcontrol.o: In function `__cmpxchg_mb':
memcontrol.c:(.text+0x1a4c): undefined reference to `__compiletime_assert_175'
memcontrol.c:(.text+0x1a4c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `__compiletime_assert_175'

Mark all of the cmpxchg() style functions as __always_inline to
ensure that the compiler can see the result.

Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/648
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Tested-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/include/asm/cmpxchg.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/include/asm/cmpxchg.h b/arch/arm64/include/asm/cmpxchg.h
index 0f2e1ab5e1666..9b2e2e2e728ae 100644
--- a/arch/arm64/include/asm/cmpxchg.h
+++ b/arch/arm64/include/asm/cmpxchg.h
@@ -73,7 +73,7 @@ __XCHG_CASE( ,  ,  mb_8, dmb ish, nop,  , a, l, "memory")
 #undef __XCHG_CASE
 
 #define __XCHG_GEN(sfx)							\
-static inline unsigned long __xchg##sfx(unsigned long x,		\
+static __always_inline  unsigned long __xchg##sfx(unsigned long x,	\
 					volatile void *ptr,		\
 					int size)			\
 {									\
@@ -115,7 +115,7 @@ __XCHG_GEN(_mb)
 #define xchg(...)		__xchg_wrapper( _mb, __VA_ARGS__)
 
 #define __CMPXCHG_GEN(sfx)						\
-static inline unsigned long __cmpxchg##sfx(volatile void *ptr,		\
+static __always_inline unsigned long __cmpxchg##sfx(volatile void *ptr,	\
 					   unsigned long old,		\
 					   unsigned long new,		\
 					   int size)			\
@@ -248,7 +248,7 @@ __CMPWAIT_CASE( ,  , 8);
 #undef __CMPWAIT_CASE
 
 #define __CMPWAIT_GEN(sfx)						\
-static inline void __cmpwait##sfx(volatile void *ptr,			\
+static __always_inline void __cmpwait##sfx(volatile void *ptr,		\
 				  unsigned long val,			\
 				  int size)				\
 {									\
-- 
2.20.1

[PATCH AUTOSEL 4.9 18/19] clk: at91: select parent if main oscillator or bypass is enabled

[Sasha Levin]

From: Eugen Hristev <eugen.hristev@microchip.com>

[ Upstream commit 69a6bcde7fd3fe6f3268ce26f31d9d9378384c98 ]

Selecting the right parent for the main clock is done using only
main oscillator enabled bit.
In case we have this oscillator bypassed by an external signal (no driving
on the XOUT line), we still use external clock, but with BYPASS bit set.
So, in this case we must select the same parent as before.
Create a macro that will select the right parent considering both bits from
the MOR register.
Use this macro when looking for the right parent.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Link: https://lkml.kernel.org/r/1568042692-11784-2-git-send-email-eugen.hristev@microchip.com
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/at91/clk-main.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/at91/clk-main.c b/drivers/clk/at91/clk-main.c
index c813c27f2e58c..2f97a843d6d6b 100644
--- a/drivers/clk/at91/clk-main.c
+++ b/drivers/clk/at91/clk-main.c
@@ -27,6 +27,10 @@
 
 #define MOR_KEY_MASK		(0xff << 16)
 
+#define clk_main_parent_select(s)	(((s) & \
+					(AT91_PMC_MOSCEN | \
+					AT91_PMC_OSCBYPASS)) ? 1 : 0)
+
 struct clk_main_osc {
 	struct clk_hw hw;
 	struct regmap *regmap;
@@ -119,7 +123,7 @@ static int clk_main_osc_is_prepared(struct clk_hw *hw)
 
 	regmap_read(regmap, AT91_PMC_SR, &status);
 
-	return (status & AT91_PMC_MOSCS) && (tmp & AT91_PMC_MOSCEN);
+	return (status & AT91_PMC_MOSCS) && clk_main_parent_select(tmp);
 }
 
 static const struct clk_ops main_osc_ops = {
@@ -530,7 +534,7 @@ static u8 clk_sam9x5_main_get_parent(struct clk_hw *hw)
 
 	regmap_read(clkmain->regmap, AT91_CKGR_MOR, &status);
 
-	return status & AT91_PMC_MOSCEN ? 1 : 0;
+	return clk_main_parent_select(status);
 }
 
 static const struct clk_ops sam9x5_main_ops = {
@@ -572,7 +576,7 @@ at91_clk_register_sam9x5_main(struct regmap *regmap,
 	clkmain->hw.init = &init;
 	clkmain->regmap = regmap;
 	regmap_read(clkmain->regmap, AT91_CKGR_MOR, &status);
-	clkmain->parent = status & AT91_PMC_MOSCEN ? 1 : 0;
+	clkmain->parent = clk_main_parent_select(status);
 
 	hw = &clkmain->hw;
 	ret = clk_hw_register(NULL, &clkmain->hw);
-- 
2.20.1

[PATCH AUTOSEL 4.9 19/19] scsi: core: Reduce memory required for SCSI logging

[Sasha Levin]

From: Bart Van Assche <bvanassche@acm.org>

[ Upstream commit dccc96abfb21dc19d69e707c38c8ba439bba7160 ]

The data structure used for log messages is so large that it can cause a
boot failure. Since allocations from that data structure can fail anyway,
use kmalloc() / kfree() instead of that data structure.

See also https://bugzilla.kernel.org/show_bug.cgi?id=204119.
See also commit ded85c193a39 ("scsi: Implement per-cpu logging buffer") # v4.0.

Reported-by: Jan Palus <jpalus@fastmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Jan Palus <jpalus@fastmail.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/scsi_logging.c | 48 +++----------------------------------
 include/scsi/scsi_dbg.h     |  2 --
 2 files changed, 3 insertions(+), 47 deletions(-)

diff --git a/drivers/scsi/scsi_logging.c b/drivers/scsi/scsi_logging.c
index bd70339c1242e..03d9855a6afd7 100644
--- a/drivers/scsi/scsi_logging.c
+++ b/drivers/scsi/scsi_logging.c
@@ -16,57 +16,15 @@
 #include <scsi/scsi_eh.h>
 #include <scsi/scsi_dbg.h>
 
-#define SCSI_LOG_SPOOLSIZE 4096
-
-#if (SCSI_LOG_SPOOLSIZE / SCSI_LOG_BUFSIZE) > BITS_PER_LONG
-#warning SCSI logging bitmask too large
-#endif
-
-struct scsi_log_buf {
-	char buffer[SCSI_LOG_SPOOLSIZE];
-	unsigned long map;
-};
-
-static DEFINE_PER_CPU(struct scsi_log_buf, scsi_format_log);
-
 static char *scsi_log_reserve_buffer(size_t *len)
 {
-	struct scsi_log_buf *buf;
-	unsigned long map_bits = sizeof(buf->buffer) / SCSI_LOG_BUFSIZE;
-	unsigned long idx = 0;
-
-	preempt_disable();
-	buf = this_cpu_ptr(&scsi_format_log);
-	idx = find_first_zero_bit(&buf->map, map_bits);
-	if (likely(idx < map_bits)) {
-		while (test_and_set_bit(idx, &buf->map)) {
-			idx = find_next_zero_bit(&buf->map, map_bits, idx);
-			if (idx >= map_bits)
-				break;
-		}
-	}
-	if (WARN_ON(idx >= map_bits)) {
-		preempt_enable();
-		return NULL;
-	}
-	*len = SCSI_LOG_BUFSIZE;
-	return buf->buffer + idx * SCSI_LOG_BUFSIZE;
+	*len = 128;
+	return kmalloc(*len, GFP_ATOMIC);
 }
 
 static void scsi_log_release_buffer(char *bufptr)
 {
-	struct scsi_log_buf *buf;
-	unsigned long idx;
-	int ret;
-
-	buf = this_cpu_ptr(&scsi_format_log);
-	if (bufptr >= buf->buffer &&
-	    bufptr < buf->buffer + SCSI_LOG_SPOOLSIZE) {
-		idx = (bufptr - buf->buffer) / SCSI_LOG_BUFSIZE;
-		ret = test_and_clear_bit(idx, &buf->map);
-		WARN_ON(!ret);
-	}
-	preempt_enable();
+	kfree(bufptr);
 }
 
 static inline const char *scmd_name(const struct scsi_cmnd *scmd)
diff --git a/include/scsi/scsi_dbg.h b/include/scsi/scsi_dbg.h
index 56710e03101c6..1fcf14aee28a8 100644
--- a/include/scsi/scsi_dbg.h
+++ b/include/scsi/scsi_dbg.h
@@ -5,8 +5,6 @@ struct scsi_cmnd;
 struct scsi_device;
 struct scsi_sense_hdr;
 
-#define SCSI_LOG_BUFSIZE 128
-
 extern void scsi_print_command(struct scsi_cmnd *);
 extern size_t __scsi_format_command(char *, size_t,
 				   const unsigned char *, size_t);
-- 
2.20.1