* [PATCH RESEND] ARM: dts: arndale: Add audio support (WM1811 CODEC boards)
@ 2019-10-02 15:28 ` Sylwester Nawrocki
0 siblings, 0 replies; 6+ messages in thread
From: Sylwester Nawrocki @ 2019-10-02 15:28 UTC (permalink / raw)
To: krzk
Cc: devicetree, linux-samsung-soc, b.zolnierkie, robh+dt,
Sylwester Nawrocki, linux-arm-kernel, m.szyprowski
Add sound node and the clock configurations for the I2S controller
for audio support on the Exynos5250 SoC Arndale boards with
WM1811 based audio daughter board.
We need to increase drive strength of the I2S bus, otherwise
the audio CODEC doesn't work. Likely the CODEC's master clock
is the main issue here.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
---
Changes since v2:
- none.
Changes since v1:
- moved &clock, &clock_audss parts to preserve alphabetical order
---
arch/arm/boot/dts/exynos5250-arndale.dts | 27 +++++++++++++++++++++++-
1 file changed, 26 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 6fcb78a354fe..d6c85efdb465 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -11,6 +11,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/sound/samsung-i2s.h>
#include "exynos5250.dtsi"
/ {
@@ -135,6 +136,12 @@
};
};
+ sound {
+ compatible = "samsung,arndale-wm1811";
+ samsung,audio-cpu = <&i2s0>;
+ samsung,audio-codec = <&wm1811>;
+ };
+
fixed-rate-clocks {
xxti {
compatible = "samsung,clock-xxti";
@@ -151,6 +158,16 @@
};
};
+&clock {
+ assigned-clocks = <&clock CLK_FOUT_EPLL>;
+ assigned-clock-rates = <49152000>;
+};
+
+&clock_audss {
+ assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
+ assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
+};
+
&cpu0 {
cpu0-supply = <&buck2_reg>;
};
@@ -502,9 +519,11 @@
&i2c_3 {
status = "okay";
- wm1811a@1a {
+ wm1811: codec@1a {
compatible = "wlf,wm1811";
reg = <0x1a>;
+ clocks = <&i2s0 CLK_I2S_CDCLK>;
+ clock-names = "MCLK1";
AVDD2-supply = <&main_dc_reg>;
CPVDD-supply = <&main_dc_reg>;
@@ -540,9 +559,15 @@
};
&i2s0 {
+ assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
+ assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>;
status = "okay";
};
+&i2s0_bus {
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>;
+};
+
&mali {
mali-supply = <&buck4_reg>;
status = "okay";
--
2.17.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH RESEND] ARM: dts: arndale: Add audio support (WM1811 CODEC boards)
@ 2019-10-02 15:28 ` Sylwester Nawrocki
0 siblings, 0 replies; 6+ messages in thread
From: Sylwester Nawrocki @ 2019-10-02 15:28 UTC (permalink / raw)
To: krzk
Cc: linux-arm-kernel, linux-samsung-soc, devicetree, robh+dt,
b.zolnierkie, m.szyprowski, Sylwester Nawrocki
Add sound node and the clock configurations for the I2S controller
for audio support on the Exynos5250 SoC Arndale boards with
WM1811 based audio daughter board.
We need to increase drive strength of the I2S bus, otherwise
the audio CODEC doesn't work. Likely the CODEC's master clock
is the main issue here.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
---
Changes since v2:
- none.
Changes since v1:
- moved &clock, &clock_audss parts to preserve alphabetical order
---
arch/arm/boot/dts/exynos5250-arndale.dts | 27 +++++++++++++++++++++++-
1 file changed, 26 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 6fcb78a354fe..d6c85efdb465 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -11,6 +11,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/sound/samsung-i2s.h>
#include "exynos5250.dtsi"
/ {
@@ -135,6 +136,12 @@
};
};
+ sound {
+ compatible = "samsung,arndale-wm1811";
+ samsung,audio-cpu = <&i2s0>;
+ samsung,audio-codec = <&wm1811>;
+ };
+
fixed-rate-clocks {
xxti {
compatible = "samsung,clock-xxti";
@@ -151,6 +158,16 @@
};
};
+&clock {
+ assigned-clocks = <&clock CLK_FOUT_EPLL>;
+ assigned-clock-rates = <49152000>;
+};
+
+&clock_audss {
+ assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
+ assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
+};
+
&cpu0 {
cpu0-supply = <&buck2_reg>;
};
@@ -502,9 +519,11 @@
&i2c_3 {
status = "okay";
- wm1811a@1a {
+ wm1811: codec@1a {
compatible = "wlf,wm1811";
reg = <0x1a>;
+ clocks = <&i2s0 CLK_I2S_CDCLK>;
+ clock-names = "MCLK1";
AVDD2-supply = <&main_dc_reg>;
CPVDD-supply = <&main_dc_reg>;
@@ -540,9 +559,15 @@
};
&i2s0 {
+ assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
+ assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>;
status = "okay";
};
+&i2s0_bus {
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>;
+};
+
&mali {
mali-supply = <&buck4_reg>;
status = "okay";
--
2.17.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH RESEND] ARM: dts: arndale: Add audio support (WM1811 CODEC boards)
@ 2019-10-02 15:28 ` Sylwester Nawrocki
0 siblings, 0 replies; 6+ messages in thread
From: Sylwester Nawrocki @ 2019-10-02 15:28 UTC (permalink / raw)
To: krzk
Cc: devicetree, linux-samsung-soc, b.zolnierkie, robh+dt,
Sylwester Nawrocki, linux-arm-kernel, m.szyprowski
Add sound node and the clock configurations for the I2S controller
for audio support on the Exynos5250 SoC Arndale boards with
WM1811 based audio daughter board.
We need to increase drive strength of the I2S bus, otherwise
the audio CODEC doesn't work. Likely the CODEC's master clock
is the main issue here.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
---
Changes since v2:
- none.
Changes since v1:
- moved &clock, &clock_audss parts to preserve alphabetical order
---
arch/arm/boot/dts/exynos5250-arndale.dts | 27 +++++++++++++++++++++++-
1 file changed, 26 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 6fcb78a354fe..d6c85efdb465 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -11,6 +11,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/sound/samsung-i2s.h>
#include "exynos5250.dtsi"
/ {
@@ -135,6 +136,12 @@
};
};
+ sound {
+ compatible = "samsung,arndale-wm1811";
+ samsung,audio-cpu = <&i2s0>;
+ samsung,audio-codec = <&wm1811>;
+ };
+
fixed-rate-clocks {
xxti {
compatible = "samsung,clock-xxti";
@@ -151,6 +158,16 @@
};
};
+&clock {
+ assigned-clocks = <&clock CLK_FOUT_EPLL>;
+ assigned-clock-rates = <49152000>;
+};
+
+&clock_audss {
+ assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
+ assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
+};
+
&cpu0 {
cpu0-supply = <&buck2_reg>;
};
@@ -502,9 +519,11 @@
&i2c_3 {
status = "okay";
- wm1811a@1a {
+ wm1811: codec@1a {
compatible = "wlf,wm1811";
reg = <0x1a>;
+ clocks = <&i2s0 CLK_I2S_CDCLK>;
+ clock-names = "MCLK1";
AVDD2-supply = <&main_dc_reg>;
CPVDD-supply = <&main_dc_reg>;
@@ -540,9 +559,15 @@
};
&i2s0 {
+ assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
+ assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>;
status = "okay";
};
+&i2s0_bus {
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>;
+};
+
&mali {
mali-supply = <&buck4_reg>;
status = "okay";
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH RESEND] ARM: dts: arndale: Add audio support (WM1811 CODEC boards)
@ 2019-10-02 15:59 ` Krzysztof Kozlowski
0 siblings, 0 replies; 6+ messages in thread
From: Krzysztof Kozlowski @ 2019-10-02 15:59 UTC (permalink / raw)
To: Sylwester Nawrocki
Cc: devicetree, linux-samsung-soc, b.zolnierkie, robh+dt,
linux-arm-kernel, m.szyprowski
On Wed, Oct 02, 2019 at 05:28:31PM +0200, Sylwester Nawrocki wrote:
> Add sound node and the clock configurations for the I2S controller
> for audio support on the Exynos5250 SoC Arndale boards with
> WM1811 based audio daughter board.
>
> We need to increase drive strength of the I2S bus, otherwise
> the audio CODEC doesn't work. Likely the CODEC's master clock
> is the main issue here.
>
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> ---
> Changes since v2:
> - none.
> Changes since v1:
> - moved &clock, &clock_audss parts to preserve alphabetical order
> ---
> arch/arm/boot/dts/exynos5250-arndale.dts | 27 +++++++++++++++++++++++-
Thanks, applied.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH RESEND] ARM: dts: arndale: Add audio support (WM1811 CODEC boards)
@ 2019-10-02 15:59 ` Krzysztof Kozlowski
0 siblings, 0 replies; 6+ messages in thread
From: Krzysztof Kozlowski @ 2019-10-02 15:59 UTC (permalink / raw)
To: Sylwester Nawrocki
Cc: linux-arm-kernel, linux-samsung-soc, devicetree, robh+dt,
b.zolnierkie, m.szyprowski
On Wed, Oct 02, 2019 at 05:28:31PM +0200, Sylwester Nawrocki wrote:
> Add sound node and the clock configurations for the I2S controller
> for audio support on the Exynos5250 SoC Arndale boards with
> WM1811 based audio daughter board.
>
> We need to increase drive strength of the I2S bus, otherwise
> the audio CODEC doesn't work. Likely the CODEC's master clock
> is the main issue here.
>
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> ---
> Changes since v2:
> - none.
> Changes since v1:
> - moved &clock, &clock_audss parts to preserve alphabetical order
> ---
> arch/arm/boot/dts/exynos5250-arndale.dts | 27 +++++++++++++++++++++++-
Thanks, applied.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH RESEND] ARM: dts: arndale: Add audio support (WM1811 CODEC boards)
@ 2019-10-02 15:59 ` Krzysztof Kozlowski
0 siblings, 0 replies; 6+ messages in thread
From: Krzysztof Kozlowski @ 2019-10-02 15:59 UTC (permalink / raw)
To: Sylwester Nawrocki
Cc: devicetree, linux-samsung-soc, b.zolnierkie, robh+dt,
linux-arm-kernel, m.szyprowski
On Wed, Oct 02, 2019 at 05:28:31PM +0200, Sylwester Nawrocki wrote:
> Add sound node and the clock configurations for the I2S controller
> for audio support on the Exynos5250 SoC Arndale boards with
> WM1811 based audio daughter board.
>
> We need to increase drive strength of the I2S bus, otherwise
> the audio CODEC doesn't work. Likely the CODEC's master clock
> is the main issue here.
>
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> ---
> Changes since v2:
> - none.
> Changes since v1:
> - moved &clock, &clock_audss parts to preserve alphabetical order
> ---
> arch/arm/boot/dts/exynos5250-arndale.dts | 27 +++++++++++++++++++++++-
Thanks, applied.
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-10-02 15:59 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <CGME20191002152842eucas1p281f3fb4b7efffaf74fa89ffaa4108b3f@eucas1p2.samsung.com>
2019-10-02 15:28 ` [PATCH RESEND] ARM: dts: arndale: Add audio support (WM1811 CODEC boards) Sylwester Nawrocki
2019-10-02 15:28 ` Sylwester Nawrocki
2019-10-02 15:28 ` Sylwester Nawrocki
2019-10-02 15:59 ` Krzysztof Kozlowski
2019-10-02 15:59 ` Krzysztof Kozlowski
2019-10-02 15:59 ` Krzysztof Kozlowski
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.