* [PATCH bpf-next 0/3] Auto-generate list of BPF helpers
@ 2019-10-05 7:59 Andrii Nakryiko
2019-10-05 7:59 ` [PATCH bpf-next 1/3] uapi/bpf: fix helper docs Andrii Nakryiko
` (2 more replies)
0 siblings, 3 replies; 8+ messages in thread
From: Andrii Nakryiko @ 2019-10-05 7:59 UTC (permalink / raw)
To: bpf, netdev, ast, daniel; +Cc: andrii.nakryiko, kernel-team, Andrii Nakryiko
This patch set adds ability to auto-generate list of BPF helper definitions.
It relies on existing scripts/bpf_helpers_doc.py and include/uapi/linux/bpf.h
having a well-defined set of comments. All this is integrated with libbpf's
Makefile to ensure that bpf_helpers_defs.h stays in sync with latest kernel
UAPI. By checking bpf_helpers_defs.h, we also make sure that Github projection
doesn't rely on latest kernel headers for successful build.
Andrii Nakryiko (3):
uapi/bpf: fix helper docs
scripts/bpf: teach bpf_helpers_doc.py to dump BPF helper definitions
libbpf: auto-generate list of BPF helper definitions
include/uapi/linux/bpf.h | 32 +-
scripts/bpf_helpers_doc.py | 156 +-
tools/include/uapi/linux/bpf.h | 32 +-
tools/lib/bpf/Makefile | 8 +-
tools/lib/bpf/bpf_helpers.h | 264 +--
tools/lib/bpf/bpf_helpers_defs.h | 2677 ++++++++++++++++++++++++++++++
6 files changed, 2872 insertions(+), 297 deletions(-)
create mode 100644 tools/lib/bpf/bpf_helpers_defs.h
--
2.17.1
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH bpf-next 1/3] uapi/bpf: fix helper docs
2019-10-05 7:59 [PATCH bpf-next 0/3] Auto-generate list of BPF helpers Andrii Nakryiko
@ 2019-10-05 7:59 ` Andrii Nakryiko
2019-10-05 7:59 ` [PATCH bpf-next 2/3] scripts/bpf: teach bpf_helpers_doc.py to dump BPF helper definitions Andrii Nakryiko
2019-10-05 7:59 ` [PATCH bpf-next 3/3] libbpf: auto-generate list of " Andrii Nakryiko
2 siblings, 0 replies; 8+ messages in thread
From: Andrii Nakryiko @ 2019-10-05 7:59 UTC (permalink / raw)
To: bpf, netdev, ast, daniel; +Cc: andrii.nakryiko, kernel-team, Andrii Nakryiko
Various small fixes to BPF helper documentation comments, enabling
automatic header generation with a list of BPF helpers.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
---
include/uapi/linux/bpf.h | 32 ++++++++++++++++----------------
tools/include/uapi/linux/bpf.h | 32 ++++++++++++++++----------------
2 files changed, 32 insertions(+), 32 deletions(-)
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index 77c6be96d676..a65c3b0c6935 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -794,7 +794,7 @@ union bpf_attr {
* A 64-bit integer containing the current GID and UID, and
* created as such: *current_gid* **<< 32 \|** *current_uid*.
*
- * int bpf_get_current_comm(char *buf, u32 size_of_buf)
+ * int bpf_get_current_comm(void *buf, u32 size_of_buf)
* Description
* Copy the **comm** attribute of the current task into *buf* of
* *size_of_buf*. The **comm** attribute contains the name of
@@ -1023,7 +1023,7 @@ union bpf_attr {
* The realm of the route for the packet associated to *skb*, or 0
* if none was found.
*
- * int bpf_perf_event_output(struct pt_regs *ctx, struct bpf_map *map, u64 flags, void *data, u64 size)
+ * int bpf_perf_event_output(void *ctx, struct bpf_map *map, u64 flags, void *data, u64 size)
* Description
* Write raw *data* blob into a special BPF perf event held by
* *map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. This perf
@@ -1068,7 +1068,7 @@ union bpf_attr {
* Return
* 0 on success, or a negative error in case of failure.
*
- * int bpf_skb_load_bytes(const struct sk_buff *skb, u32 offset, void *to, u32 len)
+ * int bpf_skb_load_bytes(const void *skb, u32 offset, void *to, u32 len)
* Description
* This helper was provided as an easy way to load data from a
* packet. It can be used to load *len* bytes from *offset* from
@@ -1085,7 +1085,7 @@ union bpf_attr {
* Return
* 0 on success, or a negative error in case of failure.
*
- * int bpf_get_stackid(struct pt_regs *ctx, struct bpf_map *map, u64 flags)
+ * int bpf_get_stackid(void *ctx, struct bpf_map *map, u64 flags)
* Description
* Walk a user or a kernel stack and return its id. To achieve
* this, the helper needs *ctx*, which is a pointer to the context
@@ -1154,7 +1154,7 @@ union bpf_attr {
* The checksum result, or a negative error code in case of
* failure.
*
- * int bpf_skb_get_tunnel_opt(struct sk_buff *skb, u8 *opt, u32 size)
+ * int bpf_skb_get_tunnel_opt(struct sk_buff *skb, void *opt, u32 size)
* Description
* Retrieve tunnel options metadata for the packet associated to
* *skb*, and store the raw tunnel option data to the buffer *opt*
@@ -1172,7 +1172,7 @@ union bpf_attr {
* Return
* The size of the option data retrieved.
*
- * int bpf_skb_set_tunnel_opt(struct sk_buff *skb, u8 *opt, u32 size)
+ * int bpf_skb_set_tunnel_opt(struct sk_buff *skb, void *opt, u32 size)
* Description
* Set tunnel options metadata for the packet associated to *skb*
* to the option data contained in the raw buffer *opt* of *size*.
@@ -1511,7 +1511,7 @@ union bpf_attr {
* Return
* 0
*
- * int bpf_setsockopt(struct bpf_sock_ops *bpf_socket, int level, int optname, char *optval, int optlen)
+ * int bpf_setsockopt(struct bpf_sock_ops *bpf_socket, int level, int optname, void *optval, int optlen)
* Description
* Emulate a call to **setsockopt()** on the socket associated to
* *bpf_socket*, which must be a full socket. The *level* at
@@ -1595,7 +1595,7 @@ union bpf_attr {
* Return
* **XDP_REDIRECT** on success, or **XDP_ABORTED** on error.
*
- * int bpf_sk_redirect_map(struct bpf_map *map, u32 key, u64 flags)
+ * int bpf_sk_redirect_map(struct sk_buff *skb, struct bpf_map *map, u32 key, u64 flags)
* Description
* Redirect the packet to the socket referenced by *map* (of type
* **BPF_MAP_TYPE_SOCKMAP**) at index *key*. Both ingress and
@@ -1715,7 +1715,7 @@ union bpf_attr {
* Return
* 0 on success, or a negative error in case of failure.
*
- * int bpf_getsockopt(struct bpf_sock_ops *bpf_socket, int level, int optname, char *optval, int optlen)
+ * int bpf_getsockopt(struct bpf_sock_ops *bpf_socket, int level, int optname, void *optval, int optlen)
* Description
* Emulate a call to **getsockopt()** on the socket associated to
* *bpf_socket*, which must be a full socket. The *level* at
@@ -1947,7 +1947,7 @@ union bpf_attr {
* Return
* 0 on success, or a negative error in case of failure.
*
- * int bpf_get_stack(struct pt_regs *regs, void *buf, u32 size, u64 flags)
+ * int bpf_get_stack(void *ctx, void *buf, u32 size, u64 flags)
* Description
* Return a user or a kernel stack in bpf program provided buffer.
* To achieve this, the helper needs *ctx*, which is a pointer
@@ -1980,7 +1980,7 @@ union bpf_attr {
* A non-negative value equal to or less than *size* on success,
* or a negative error in case of failure.
*
- * int bpf_skb_load_bytes_relative(const struct sk_buff *skb, u32 offset, void *to, u32 len, u32 start_header)
+ * int bpf_skb_load_bytes_relative(const void *skb, u32 offset, void *to, u32 len, u32 start_header)
* Description
* This helper is similar to **bpf_skb_load_bytes**\ () in that
* it provides an easy way to load *len* bytes from *offset*
@@ -2033,7 +2033,7 @@ union bpf_attr {
* * > 0 one of **BPF_FIB_LKUP_RET_** codes explaining why the
* packet is not forwarded or needs assist from full stack
*
- * int bpf_sock_hash_update(struct bpf_sock_ops_kern *skops, struct bpf_map *map, void *key, u64 flags)
+ * int bpf_sock_hash_update(struct bpf_sock_ops *skops, struct bpf_map *map, void *key, u64 flags)
* Description
* Add an entry to, or update a sockhash *map* referencing sockets.
* The *skops* is used as a new value for the entry associated to
@@ -2392,7 +2392,7 @@ union bpf_attr {
* Return
* 0 on success, or a negative error in case of failure.
*
- * int bpf_msg_push_data(struct sk_buff *skb, u32 start, u32 len, u64 flags)
+ * int bpf_msg_push_data(struct sk_msg_buff *msg, u32 start, u32 len, u64 flags)
* Description
* For socket policies, insert *len* bytes into *msg* at offset
* *start*.
@@ -2408,9 +2408,9 @@ union bpf_attr {
* Return
* 0 on success, or a negative error in case of failure.
*
- * int bpf_msg_pop_data(struct sk_msg_buff *msg, u32 start, u32 pop, u64 flags)
+ * int bpf_msg_pop_data(struct sk_msg_buff *msg, u32 start, u32 len, u64 flags)
* Description
- * Will remove *pop* bytes from a *msg* starting at byte *start*.
+ * Will remove *len* bytes from a *msg* starting at byte *start*.
* This may result in **ENOMEM** errors under certain situations if
* an allocation and copy are required due to a full ring buffer.
* However, the helper will try to avoid doing the allocation
@@ -2505,7 +2505,7 @@ union bpf_attr {
* A **struct bpf_tcp_sock** pointer on success, or **NULL** in
* case of failure.
*
- * int bpf_skb_ecn_set_ce(struct sk_buf *skb)
+ * int bpf_skb_ecn_set_ce(struct sk_buff *skb)
* Description
* Set ECN (Explicit Congestion Notification) field of IP header
* to **CE** (Congestion Encountered) if current value is **ECT**
diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h
index 77c6be96d676..a65c3b0c6935 100644
--- a/tools/include/uapi/linux/bpf.h
+++ b/tools/include/uapi/linux/bpf.h
@@ -794,7 +794,7 @@ union bpf_attr {
* A 64-bit integer containing the current GID and UID, and
* created as such: *current_gid* **<< 32 \|** *current_uid*.
*
- * int bpf_get_current_comm(char *buf, u32 size_of_buf)
+ * int bpf_get_current_comm(void *buf, u32 size_of_buf)
* Description
* Copy the **comm** attribute of the current task into *buf* of
* *size_of_buf*. The **comm** attribute contains the name of
@@ -1023,7 +1023,7 @@ union bpf_attr {
* The realm of the route for the packet associated to *skb*, or 0
* if none was found.
*
- * int bpf_perf_event_output(struct pt_regs *ctx, struct bpf_map *map, u64 flags, void *data, u64 size)
+ * int bpf_perf_event_output(void *ctx, struct bpf_map *map, u64 flags, void *data, u64 size)
* Description
* Write raw *data* blob into a special BPF perf event held by
* *map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. This perf
@@ -1068,7 +1068,7 @@ union bpf_attr {
* Return
* 0 on success, or a negative error in case of failure.
*
- * int bpf_skb_load_bytes(const struct sk_buff *skb, u32 offset, void *to, u32 len)
+ * int bpf_skb_load_bytes(const void *skb, u32 offset, void *to, u32 len)
* Description
* This helper was provided as an easy way to load data from a
* packet. It can be used to load *len* bytes from *offset* from
@@ -1085,7 +1085,7 @@ union bpf_attr {
* Return
* 0 on success, or a negative error in case of failure.
*
- * int bpf_get_stackid(struct pt_regs *ctx, struct bpf_map *map, u64 flags)
+ * int bpf_get_stackid(void *ctx, struct bpf_map *map, u64 flags)
* Description
* Walk a user or a kernel stack and return its id. To achieve
* this, the helper needs *ctx*, which is a pointer to the context
@@ -1154,7 +1154,7 @@ union bpf_attr {
* The checksum result, or a negative error code in case of
* failure.
*
- * int bpf_skb_get_tunnel_opt(struct sk_buff *skb, u8 *opt, u32 size)
+ * int bpf_skb_get_tunnel_opt(struct sk_buff *skb, void *opt, u32 size)
* Description
* Retrieve tunnel options metadata for the packet associated to
* *skb*, and store the raw tunnel option data to the buffer *opt*
@@ -1172,7 +1172,7 @@ union bpf_attr {
* Return
* The size of the option data retrieved.
*
- * int bpf_skb_set_tunnel_opt(struct sk_buff *skb, u8 *opt, u32 size)
+ * int bpf_skb_set_tunnel_opt(struct sk_buff *skb, void *opt, u32 size)
* Description
* Set tunnel options metadata for the packet associated to *skb*
* to the option data contained in the raw buffer *opt* of *size*.
@@ -1511,7 +1511,7 @@ union bpf_attr {
* Return
* 0
*
- * int bpf_setsockopt(struct bpf_sock_ops *bpf_socket, int level, int optname, char *optval, int optlen)
+ * int bpf_setsockopt(struct bpf_sock_ops *bpf_socket, int level, int optname, void *optval, int optlen)
* Description
* Emulate a call to **setsockopt()** on the socket associated to
* *bpf_socket*, which must be a full socket. The *level* at
@@ -1595,7 +1595,7 @@ union bpf_attr {
* Return
* **XDP_REDIRECT** on success, or **XDP_ABORTED** on error.
*
- * int bpf_sk_redirect_map(struct bpf_map *map, u32 key, u64 flags)
+ * int bpf_sk_redirect_map(struct sk_buff *skb, struct bpf_map *map, u32 key, u64 flags)
* Description
* Redirect the packet to the socket referenced by *map* (of type
* **BPF_MAP_TYPE_SOCKMAP**) at index *key*. Both ingress and
@@ -1715,7 +1715,7 @@ union bpf_attr {
* Return
* 0 on success, or a negative error in case of failure.
*
- * int bpf_getsockopt(struct bpf_sock_ops *bpf_socket, int level, int optname, char *optval, int optlen)
+ * int bpf_getsockopt(struct bpf_sock_ops *bpf_socket, int level, int optname, void *optval, int optlen)
* Description
* Emulate a call to **getsockopt()** on the socket associated to
* *bpf_socket*, which must be a full socket. The *level* at
@@ -1947,7 +1947,7 @@ union bpf_attr {
* Return
* 0 on success, or a negative error in case of failure.
*
- * int bpf_get_stack(struct pt_regs *regs, void *buf, u32 size, u64 flags)
+ * int bpf_get_stack(void *ctx, void *buf, u32 size, u64 flags)
* Description
* Return a user or a kernel stack in bpf program provided buffer.
* To achieve this, the helper needs *ctx*, which is a pointer
@@ -1980,7 +1980,7 @@ union bpf_attr {
* A non-negative value equal to or less than *size* on success,
* or a negative error in case of failure.
*
- * int bpf_skb_load_bytes_relative(const struct sk_buff *skb, u32 offset, void *to, u32 len, u32 start_header)
+ * int bpf_skb_load_bytes_relative(const void *skb, u32 offset, void *to, u32 len, u32 start_header)
* Description
* This helper is similar to **bpf_skb_load_bytes**\ () in that
* it provides an easy way to load *len* bytes from *offset*
@@ -2033,7 +2033,7 @@ union bpf_attr {
* * > 0 one of **BPF_FIB_LKUP_RET_** codes explaining why the
* packet is not forwarded or needs assist from full stack
*
- * int bpf_sock_hash_update(struct bpf_sock_ops_kern *skops, struct bpf_map *map, void *key, u64 flags)
+ * int bpf_sock_hash_update(struct bpf_sock_ops *skops, struct bpf_map *map, void *key, u64 flags)
* Description
* Add an entry to, or update a sockhash *map* referencing sockets.
* The *skops* is used as a new value for the entry associated to
@@ -2392,7 +2392,7 @@ union bpf_attr {
* Return
* 0 on success, or a negative error in case of failure.
*
- * int bpf_msg_push_data(struct sk_buff *skb, u32 start, u32 len, u64 flags)
+ * int bpf_msg_push_data(struct sk_msg_buff *msg, u32 start, u32 len, u64 flags)
* Description
* For socket policies, insert *len* bytes into *msg* at offset
* *start*.
@@ -2408,9 +2408,9 @@ union bpf_attr {
* Return
* 0 on success, or a negative error in case of failure.
*
- * int bpf_msg_pop_data(struct sk_msg_buff *msg, u32 start, u32 pop, u64 flags)
+ * int bpf_msg_pop_data(struct sk_msg_buff *msg, u32 start, u32 len, u64 flags)
* Description
- * Will remove *pop* bytes from a *msg* starting at byte *start*.
+ * Will remove *len* bytes from a *msg* starting at byte *start*.
* This may result in **ENOMEM** errors under certain situations if
* an allocation and copy are required due to a full ring buffer.
* However, the helper will try to avoid doing the allocation
@@ -2505,7 +2505,7 @@ union bpf_attr {
* A **struct bpf_tcp_sock** pointer on success, or **NULL** in
* case of failure.
*
- * int bpf_skb_ecn_set_ce(struct sk_buf *skb)
+ * int bpf_skb_ecn_set_ce(struct sk_buff *skb)
* Description
* Set ECN (Explicit Congestion Notification) field of IP header
* to **CE** (Congestion Encountered) if current value is **ECT**
--
2.17.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH bpf-next 2/3] scripts/bpf: teach bpf_helpers_doc.py to dump BPF helper definitions
2019-10-05 7:59 [PATCH bpf-next 0/3] Auto-generate list of BPF helpers Andrii Nakryiko
2019-10-05 7:59 ` [PATCH bpf-next 1/3] uapi/bpf: fix helper docs Andrii Nakryiko
@ 2019-10-05 7:59 ` Andrii Nakryiko
2019-10-05 7:59 ` [PATCH bpf-next 3/3] libbpf: auto-generate list of " Andrii Nakryiko
2 siblings, 0 replies; 8+ messages in thread
From: Andrii Nakryiko @ 2019-10-05 7:59 UTC (permalink / raw)
To: bpf, netdev, ast, daniel; +Cc: andrii.nakryiko, kernel-team, Andrii Nakryiko
Enhance scripts/bpf_helpers_doc.py to emit C header with BPF helper
definitions (to be included from libbpf's bpf_helpers.h).
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
---
scripts/bpf_helpers_doc.py | 156 ++++++++++++++++++++++++++++++++++++-
1 file changed, 155 insertions(+), 1 deletion(-)
diff --git a/scripts/bpf_helpers_doc.py b/scripts/bpf_helpers_doc.py
index 894cc58c1a03..410a994e2b36 100755
--- a/scripts/bpf_helpers_doc.py
+++ b/scripts/bpf_helpers_doc.py
@@ -391,6 +391,155 @@ SEE ALSO
print('')
+class PrinterHelpers(Printer):
+ """
+ A printer for dumping collected information about helpers as C header to
+ be included from BPF program.
+ @helpers: array of Helper objects to print to standard output
+ """
+
+ type_fwds = [
+ 'struct bpf_fib_lookup',
+ 'struct bpf_perf_event_data',
+ 'struct bpf_perf_event_value',
+ 'struct bpf_sock',
+ 'struct bpf_sock_addr',
+ 'struct bpf_sock_ops',
+ 'struct bpf_sock_tuple',
+ 'struct bpf_spin_lock',
+ 'struct bpf_sysctl',
+ 'struct bpf_tcp_sock',
+ 'struct bpf_tunnel_key',
+ 'struct bpf_xfrm_state',
+ 'struct pt_regs',
+ 'struct sk_reuseport_md',
+ 'struct sockaddr',
+ 'struct tcphdr',
+
+ 'struct __sk_buff',
+ 'struct sk_msg_md',
+ 'struct xpd_md',
+ ]
+ known_types = {
+ '...',
+ 'void',
+ 'const void',
+ 'char',
+ 'const char',
+ 'int',
+ 'long',
+ 'unsigned long',
+
+ '__be16',
+ '__be32',
+ '__wsum',
+
+ 'struct bpf_fib_lookup',
+ 'struct bpf_perf_event_data',
+ 'struct bpf_perf_event_value',
+ 'struct bpf_sock',
+ 'struct bpf_sock_addr',
+ 'struct bpf_sock_ops',
+ 'struct bpf_sock_tuple',
+ 'struct bpf_spin_lock',
+ 'struct bpf_sysctl',
+ 'struct bpf_tcp_sock',
+ 'struct bpf_tunnel_key',
+ 'struct bpf_xfrm_state',
+ 'struct pt_regs',
+ 'struct sk_reuseport_md',
+ 'struct sockaddr',
+ 'struct tcphdr',
+ }
+ mapped_types = {
+ 'u8': '__u8',
+ 'u16': '__u16',
+ 'u32': '__u32',
+ 'u64': '__u64',
+ 's8': '__s8',
+ 's16': '__s16',
+ 's32': '__s32',
+ 's64': '__s64',
+ 'size_t': 'unsigned long',
+ 'struct bpf_map': 'void',
+ 'struct sk_buff': 'struct __sk_buff',
+ 'const struct sk_buff': 'const struct __sk_buff',
+ 'struct sk_msg_buff': 'struct sk_msg_md',
+ 'struct xdp_buff': 'struct xdp_md',
+ }
+
+ def print_header(self):
+ header = '''\
+/* This is auto-generated file. See bpf_helpers_doc.py for details. */
+
+/* Forward declarations of BPF structs */ '''
+
+ print(header)
+ for fwd in self.type_fwds:
+ print('%s;' % fwd)
+ print('')
+
+ def print_footer(self):
+ footer = ''
+ print(footer)
+
+ def map_type(self, t):
+ if t in self.known_types:
+ return t
+ if t in self.mapped_types:
+ return self.mapped_types[t]
+ print("")
+ print("Unrecognized type '%s', please add it to known types!" % t)
+ sys.exit(1)
+
+ seen_helpers = set()
+
+ def print_one(self, helper):
+ proto = helper.proto_break_down()
+
+ if proto['name'] in self.seen_helpers:
+ return
+ self.seen_helpers.add(proto['name'])
+
+ print('/*')
+ print(" * %s" % proto['name'])
+ print(" *")
+ if (helper.desc):
+ # print(' * Description')
+ # Do not strip all newline characters: formatted code at the end of
+ # a section must be followed by a blank line.
+ for line in re.sub('\n$', '', helper.desc, count=1).split('\n'):
+ print(' *{}{}'.format(' \t' if line else '', line))
+
+ if (helper.ret):
+ print(' *')
+ print(' * Returns')
+ for line in helper.ret.rstrip().split('\n'):
+ print(' *{}{}'.format(' \t' if line else '', line))
+
+ print(' */')
+ print('static %s %s(*%s)(' % (self.map_type(proto['ret_type']),
+ proto['ret_star'], proto['name']), end='')
+ comma = ''
+ for i, a in enumerate(proto['args']):
+ t = a['type']
+ n = a['name']
+ if proto['name'] == 'bpf_get_socket_cookie' and i == 0:
+ t = 'void'
+ n = 'ctx'
+ one_arg = '{}{}'.format(comma, self.map_type(t))
+ if n:
+ if a['star']:
+ one_arg += ' {}'.format(a['star'])
+ else:
+ one_arg += ' '
+ one_arg += '{}'.format(n)
+ comma = ', '
+ print(one_arg, end='')
+
+ print(') = (void *) %d;' % len(self.seen_helpers))
+ print('')
+
###############################################################################
# If script is launched from scripts/ from kernel tree and can access
@@ -405,6 +554,8 @@ Parse eBPF header file and generate documentation for eBPF helper functions.
The RST-formatted output produced can be turned into a manual page with the
rst2man utility.
""")
+argParser.add_argument('--header', action='store_true',
+ help='generate C header file')
if (os.path.isfile(bpfh)):
argParser.add_argument('--filename', help='path to include/uapi/linux/bpf.h',
default=bpfh)
@@ -417,5 +568,8 @@ headerParser = HeaderParser(args.filename)
headerParser.run()
# Print formatted output to standard output.
-printer = PrinterRST(headerParser.helpers)
+if args.header:
+ printer = PrinterHelpers(headerParser.helpers)
+else:
+ printer = PrinterRST(headerParser.helpers)
printer.print_all()
--
2.17.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH bpf-next 3/3] libbpf: auto-generate list of BPF helper definitions
2019-10-05 7:59 [PATCH bpf-next 0/3] Auto-generate list of BPF helpers Andrii Nakryiko
2019-10-05 7:59 ` [PATCH bpf-next 1/3] uapi/bpf: fix helper docs Andrii Nakryiko
2019-10-05 7:59 ` [PATCH bpf-next 2/3] scripts/bpf: teach bpf_helpers_doc.py to dump BPF helper definitions Andrii Nakryiko
@ 2019-10-05 7:59 ` Andrii Nakryiko
2019-10-05 17:10 ` Alexei Starovoitov
2 siblings, 1 reply; 8+ messages in thread
From: Andrii Nakryiko @ 2019-10-05 7:59 UTC (permalink / raw)
To: bpf, netdev, ast, daniel; +Cc: andrii.nakryiko, kernel-team, Andrii Nakryiko
Get rid of list of BPF helpers in bpf_helpers.h (irony...) and
auto-generate it into bpf_helpers_defs.h, which is now included from
bpf_helpers.h.
Suggested-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
---
tools/lib/bpf/Makefile | 8 +-
tools/lib/bpf/bpf_helpers.h | 264 +--
tools/lib/bpf/bpf_helpers_defs.h | 2677 ++++++++++++++++++++++++++++++
3 files changed, 2685 insertions(+), 264 deletions(-)
create mode 100644 tools/lib/bpf/bpf_helpers_defs.h
diff --git a/tools/lib/bpf/Makefile b/tools/lib/bpf/Makefile
index 20b5b0ff5c73..6a6e55f5f376 100644
--- a/tools/lib/bpf/Makefile
+++ b/tools/lib/bpf/Makefile
@@ -155,7 +155,7 @@ all: fixdep
all_cmd: $(CMD_TARGETS) check
-$(BPF_IN): force elfdep bpfdep
+$(BPF_IN): force elfdep bpfdep bpf_helpers_defs.h
@(test -f ../../include/uapi/linux/bpf.h -a -f ../../../include/uapi/linux/bpf.h && ( \
(diff -B ../../include/uapi/linux/bpf.h ../../../include/uapi/linux/bpf.h >/dev/null) || \
echo "Warning: Kernel ABI header at 'tools/include/uapi/linux/bpf.h' differs from latest version at 'include/uapi/linux/bpf.h'" >&2 )) || true
@@ -173,6 +173,9 @@ $(BPF_IN): force elfdep bpfdep
echo "Warning: Kernel ABI header at 'tools/include/uapi/linux/if_xdp.h' differs from latest version at 'include/uapi/linux/if_xdp.h'" >&2 )) || true
$(Q)$(MAKE) $(build)=libbpf
+bpf_helpers_defs.h: $(srctree)/include/uapi/linux/bpf.h
+ $(srctree)/scripts/bpf_helpers_doc.py --header --file $(srctree)/include/uapi/linux/bpf.h > bpf_helpers_defs.h
+
$(OUTPUT)libbpf.so: $(OUTPUT)libbpf.so.$(LIBBPF_VERSION)
$(OUTPUT)libbpf.so.$(LIBBPF_VERSION): $(BPF_IN)
@@ -234,7 +237,7 @@ install_lib: all_cmd
$(call do_install_mkdir,$(libdir_SQ)); \
cp -fpR $(LIB_FILE) $(DESTDIR)$(libdir_SQ)
-install_headers:
+install_headers: bpf_helpers_defs.h
$(call QUIET_INSTALL, headers) \
$(call do_install,bpf.h,$(prefix)/include/bpf,644); \
$(call do_install,libbpf.h,$(prefix)/include/bpf,644); \
@@ -242,6 +245,7 @@ install_headers:
$(call do_install,libbpf_util.h,$(prefix)/include/bpf,644); \
$(call do_install,xsk.h,$(prefix)/include/bpf,644); \
$(call do_install,bpf_helpers.h,$(prefix)/include/bpf,644); \
+ $(call do_install,bpf_helpers_defs.h,$(prefix)/include/bpf,644); \
$(call do_install,bpf_tracing.h,$(prefix)/include/bpf,644); \
$(call do_install,bpf_endian.h,$(prefix)/include/bpf,644);
diff --git a/tools/lib/bpf/bpf_helpers.h b/tools/lib/bpf/bpf_helpers.h
index 2d3d1f51cdd0..f3158bfb2170 100644
--- a/tools/lib/bpf/bpf_helpers.h
+++ b/tools/lib/bpf/bpf_helpers.h
@@ -2,6 +2,8 @@
#ifndef __BPF_HELPERS__
#define __BPF_HELPERS__
+#include "bpf_helpers_defs.h"
+
#define __uint(name, val) int (*name)[val]
#define __type(name, val) val *name
@@ -24,268 +26,6 @@
#define __always_inline __attribute__((always_inline))
#endif
-/* helper functions called from eBPF programs written in C */
-static void *(*bpf_map_lookup_elem)(void *map, const void *key) =
- (void *) BPF_FUNC_map_lookup_elem;
-static int (*bpf_map_update_elem)(void *map, const void *key, const void *value,
- unsigned long long flags) =
- (void *) BPF_FUNC_map_update_elem;
-static int (*bpf_map_delete_elem)(void *map, const void *key) =
- (void *) BPF_FUNC_map_delete_elem;
-static int (*bpf_map_push_elem)(void *map, const void *value,
- unsigned long long flags) =
- (void *) BPF_FUNC_map_push_elem;
-static int (*bpf_map_pop_elem)(void *map, void *value) =
- (void *) BPF_FUNC_map_pop_elem;
-static int (*bpf_map_peek_elem)(void *map, void *value) =
- (void *) BPF_FUNC_map_peek_elem;
-static int (*bpf_probe_read)(void *dst, int size, const void *unsafe_ptr) =
- (void *) BPF_FUNC_probe_read;
-static unsigned long long (*bpf_ktime_get_ns)(void) =
- (void *) BPF_FUNC_ktime_get_ns;
-static int (*bpf_trace_printk)(const char *fmt, int fmt_size, ...) =
- (void *) BPF_FUNC_trace_printk;
-static void (*bpf_tail_call)(void *ctx, void *map, int index) =
- (void *) BPF_FUNC_tail_call;
-static unsigned long long (*bpf_get_smp_processor_id)(void) =
- (void *) BPF_FUNC_get_smp_processor_id;
-static unsigned long long (*bpf_get_current_pid_tgid)(void) =
- (void *) BPF_FUNC_get_current_pid_tgid;
-static unsigned long long (*bpf_get_current_uid_gid)(void) =
- (void *) BPF_FUNC_get_current_uid_gid;
-static int (*bpf_get_current_comm)(void *buf, int buf_size) =
- (void *) BPF_FUNC_get_current_comm;
-static unsigned long long (*bpf_perf_event_read)(void *map,
- unsigned long long flags) =
- (void *) BPF_FUNC_perf_event_read;
-static int (*bpf_clone_redirect)(void *ctx, int ifindex, int flags) =
- (void *) BPF_FUNC_clone_redirect;
-static int (*bpf_redirect)(int ifindex, int flags) =
- (void *) BPF_FUNC_redirect;
-static int (*bpf_redirect_map)(void *map, int key, int flags) =
- (void *) BPF_FUNC_redirect_map;
-static int (*bpf_perf_event_output)(void *ctx, void *map,
- unsigned long long flags, void *data,
- int size) =
- (void *) BPF_FUNC_perf_event_output;
-static int (*bpf_get_stackid)(void *ctx, void *map, int flags) =
- (void *) BPF_FUNC_get_stackid;
-static int (*bpf_probe_write_user)(void *dst, const void *src, int size) =
- (void *) BPF_FUNC_probe_write_user;
-static int (*bpf_current_task_under_cgroup)(void *map, int index) =
- (void *) BPF_FUNC_current_task_under_cgroup;
-static int (*bpf_skb_get_tunnel_key)(void *ctx, void *key, int size, int flags) =
- (void *) BPF_FUNC_skb_get_tunnel_key;
-static int (*bpf_skb_set_tunnel_key)(void *ctx, void *key, int size, int flags) =
- (void *) BPF_FUNC_skb_set_tunnel_key;
-static int (*bpf_skb_get_tunnel_opt)(void *ctx, void *md, int size) =
- (void *) BPF_FUNC_skb_get_tunnel_opt;
-static int (*bpf_skb_set_tunnel_opt)(void *ctx, void *md, int size) =
- (void *) BPF_FUNC_skb_set_tunnel_opt;
-static unsigned long long (*bpf_get_prandom_u32)(void) =
- (void *) BPF_FUNC_get_prandom_u32;
-static int (*bpf_xdp_adjust_head)(void *ctx, int offset) =
- (void *) BPF_FUNC_xdp_adjust_head;
-static int (*bpf_xdp_adjust_meta)(void *ctx, int offset) =
- (void *) BPF_FUNC_xdp_adjust_meta;
-static int (*bpf_get_socket_cookie)(void *ctx) =
- (void *) BPF_FUNC_get_socket_cookie;
-static int (*bpf_setsockopt)(void *ctx, int level, int optname, void *optval,
- int optlen) =
- (void *) BPF_FUNC_setsockopt;
-static int (*bpf_getsockopt)(void *ctx, int level, int optname, void *optval,
- int optlen) =
- (void *) BPF_FUNC_getsockopt;
-static int (*bpf_sock_ops_cb_flags_set)(void *ctx, int flags) =
- (void *) BPF_FUNC_sock_ops_cb_flags_set;
-static int (*bpf_sk_redirect_map)(void *ctx, void *map, int key, int flags) =
- (void *) BPF_FUNC_sk_redirect_map;
-static int (*bpf_sk_redirect_hash)(void *ctx, void *map, void *key, int flags) =
- (void *) BPF_FUNC_sk_redirect_hash;
-static int (*bpf_sock_map_update)(void *map, void *key, void *value,
- unsigned long long flags) =
- (void *) BPF_FUNC_sock_map_update;
-static int (*bpf_sock_hash_update)(void *map, void *key, void *value,
- unsigned long long flags) =
- (void *) BPF_FUNC_sock_hash_update;
-static int (*bpf_perf_event_read_value)(void *map, unsigned long long flags,
- void *buf, unsigned int buf_size) =
- (void *) BPF_FUNC_perf_event_read_value;
-static int (*bpf_perf_prog_read_value)(void *ctx, void *buf,
- unsigned int buf_size) =
- (void *) BPF_FUNC_perf_prog_read_value;
-static int (*bpf_override_return)(void *ctx, unsigned long rc) =
- (void *) BPF_FUNC_override_return;
-static int (*bpf_msg_redirect_map)(void *ctx, void *map, int key, int flags) =
- (void *) BPF_FUNC_msg_redirect_map;
-static int (*bpf_msg_redirect_hash)(void *ctx,
- void *map, void *key, int flags) =
- (void *) BPF_FUNC_msg_redirect_hash;
-static int (*bpf_msg_apply_bytes)(void *ctx, int len) =
- (void *) BPF_FUNC_msg_apply_bytes;
-static int (*bpf_msg_cork_bytes)(void *ctx, int len) =
- (void *) BPF_FUNC_msg_cork_bytes;
-static int (*bpf_msg_pull_data)(void *ctx, int start, int end, int flags) =
- (void *) BPF_FUNC_msg_pull_data;
-static int (*bpf_msg_push_data)(void *ctx, int start, int end, int flags) =
- (void *) BPF_FUNC_msg_push_data;
-static int (*bpf_msg_pop_data)(void *ctx, int start, int cut, int flags) =
- (void *) BPF_FUNC_msg_pop_data;
-static int (*bpf_bind)(void *ctx, void *addr, int addr_len) =
- (void *) BPF_FUNC_bind;
-static int (*bpf_xdp_adjust_tail)(void *ctx, int offset) =
- (void *) BPF_FUNC_xdp_adjust_tail;
-static int (*bpf_skb_get_xfrm_state)(void *ctx, int index, void *state,
- int size, int flags) =
- (void *) BPF_FUNC_skb_get_xfrm_state;
-static int (*bpf_sk_select_reuseport)(void *ctx, void *map, void *key, __u32 flags) =
- (void *) BPF_FUNC_sk_select_reuseport;
-static int (*bpf_get_stack)(void *ctx, void *buf, int size, int flags) =
- (void *) BPF_FUNC_get_stack;
-static int (*bpf_fib_lookup)(void *ctx, struct bpf_fib_lookup *params,
- int plen, __u32 flags) =
- (void *) BPF_FUNC_fib_lookup;
-static int (*bpf_lwt_push_encap)(void *ctx, unsigned int type, void *hdr,
- unsigned int len) =
- (void *) BPF_FUNC_lwt_push_encap;
-static int (*bpf_lwt_seg6_store_bytes)(void *ctx, unsigned int offset,
- void *from, unsigned int len) =
- (void *) BPF_FUNC_lwt_seg6_store_bytes;
-static int (*bpf_lwt_seg6_action)(void *ctx, unsigned int action, void *param,
- unsigned int param_len) =
- (void *) BPF_FUNC_lwt_seg6_action;
-static int (*bpf_lwt_seg6_adjust_srh)(void *ctx, unsigned int offset,
- unsigned int len) =
- (void *) BPF_FUNC_lwt_seg6_adjust_srh;
-static int (*bpf_rc_repeat)(void *ctx) =
- (void *) BPF_FUNC_rc_repeat;
-static int (*bpf_rc_keydown)(void *ctx, unsigned int protocol,
- unsigned long long scancode, unsigned int toggle) =
- (void *) BPF_FUNC_rc_keydown;
-static unsigned long long (*bpf_get_current_cgroup_id)(void) =
- (void *) BPF_FUNC_get_current_cgroup_id;
-static void *(*bpf_get_local_storage)(void *map, unsigned long long flags) =
- (void *) BPF_FUNC_get_local_storage;
-static unsigned long long (*bpf_skb_cgroup_id)(void *ctx) =
- (void *) BPF_FUNC_skb_cgroup_id;
-static unsigned long long (*bpf_skb_ancestor_cgroup_id)(void *ctx, int level) =
- (void *) BPF_FUNC_skb_ancestor_cgroup_id;
-static struct bpf_sock *(*bpf_sk_lookup_tcp)(void *ctx,
- struct bpf_sock_tuple *tuple,
- int size, unsigned long long netns_id,
- unsigned long long flags) =
- (void *) BPF_FUNC_sk_lookup_tcp;
-static struct bpf_sock *(*bpf_skc_lookup_tcp)(void *ctx,
- struct bpf_sock_tuple *tuple,
- int size, unsigned long long netns_id,
- unsigned long long flags) =
- (void *) BPF_FUNC_skc_lookup_tcp;
-static struct bpf_sock *(*bpf_sk_lookup_udp)(void *ctx,
- struct bpf_sock_tuple *tuple,
- int size, unsigned long long netns_id,
- unsigned long long flags) =
- (void *) BPF_FUNC_sk_lookup_udp;
-static int (*bpf_sk_release)(struct bpf_sock *sk) =
- (void *) BPF_FUNC_sk_release;
-static int (*bpf_skb_vlan_push)(void *ctx, __be16 vlan_proto, __u16 vlan_tci) =
- (void *) BPF_FUNC_skb_vlan_push;
-static int (*bpf_skb_vlan_pop)(void *ctx) =
- (void *) BPF_FUNC_skb_vlan_pop;
-static int (*bpf_rc_pointer_rel)(void *ctx, int rel_x, int rel_y) =
- (void *) BPF_FUNC_rc_pointer_rel;
-static void (*bpf_spin_lock)(struct bpf_spin_lock *lock) =
- (void *) BPF_FUNC_spin_lock;
-static void (*bpf_spin_unlock)(struct bpf_spin_lock *lock) =
- (void *) BPF_FUNC_spin_unlock;
-static struct bpf_sock *(*bpf_sk_fullsock)(struct bpf_sock *sk) =
- (void *) BPF_FUNC_sk_fullsock;
-static struct bpf_tcp_sock *(*bpf_tcp_sock)(struct bpf_sock *sk) =
- (void *) BPF_FUNC_tcp_sock;
-static struct bpf_sock *(*bpf_get_listener_sock)(struct bpf_sock *sk) =
- (void *) BPF_FUNC_get_listener_sock;
-static int (*bpf_skb_ecn_set_ce)(void *ctx) =
- (void *) BPF_FUNC_skb_ecn_set_ce;
-static int (*bpf_tcp_check_syncookie)(struct bpf_sock *sk,
- void *ip, int ip_len, void *tcp, int tcp_len) =
- (void *) BPF_FUNC_tcp_check_syncookie;
-static int (*bpf_sysctl_get_name)(void *ctx, char *buf,
- unsigned long long buf_len,
- unsigned long long flags) =
- (void *) BPF_FUNC_sysctl_get_name;
-static int (*bpf_sysctl_get_current_value)(void *ctx, char *buf,
- unsigned long long buf_len) =
- (void *) BPF_FUNC_sysctl_get_current_value;
-static int (*bpf_sysctl_get_new_value)(void *ctx, char *buf,
- unsigned long long buf_len) =
- (void *) BPF_FUNC_sysctl_get_new_value;
-static int (*bpf_sysctl_set_new_value)(void *ctx, const char *buf,
- unsigned long long buf_len) =
- (void *) BPF_FUNC_sysctl_set_new_value;
-static int (*bpf_strtol)(const char *buf, unsigned long long buf_len,
- unsigned long long flags, long *res) =
- (void *) BPF_FUNC_strtol;
-static int (*bpf_strtoul)(const char *buf, unsigned long long buf_len,
- unsigned long long flags, unsigned long *res) =
- (void *) BPF_FUNC_strtoul;
-static void *(*bpf_sk_storage_get)(void *map, struct bpf_sock *sk,
- void *value, __u64 flags) =
- (void *) BPF_FUNC_sk_storage_get;
-static int (*bpf_sk_storage_delete)(void *map, struct bpf_sock *sk) =
- (void *)BPF_FUNC_sk_storage_delete;
-static int (*bpf_send_signal)(unsigned sig) = (void *)BPF_FUNC_send_signal;
-static long long (*bpf_tcp_gen_syncookie)(struct bpf_sock *sk, void *ip,
- int ip_len, void *tcp, int tcp_len) =
- (void *) BPF_FUNC_tcp_gen_syncookie;
-
-static int (*bpf_skb_load_bytes)(void *ctx, int off, void *to, int len) =
- (void *) BPF_FUNC_skb_load_bytes;
-static int (*bpf_skb_load_bytes_relative)(void *ctx, int off, void *to, int len, __u32 start_header) =
- (void *) BPF_FUNC_skb_load_bytes_relative;
-static int (*bpf_skb_store_bytes)(void *ctx, int off, void *from, int len, int flags) =
- (void *) BPF_FUNC_skb_store_bytes;
-static int (*bpf_l3_csum_replace)(void *ctx, int off, int from, int to, int flags) =
- (void *) BPF_FUNC_l3_csum_replace;
-static int (*bpf_l4_csum_replace)(void *ctx, int off, int from, int to, int flags) =
- (void *) BPF_FUNC_l4_csum_replace;
-static int (*bpf_csum_diff)(void *from, int from_size, void *to, int to_size, int seed) =
- (void *) BPF_FUNC_csum_diff;
-static int (*bpf_skb_under_cgroup)(void *ctx, void *map, int index) =
- (void *) BPF_FUNC_skb_under_cgroup;
-static int (*bpf_skb_change_head)(void *, int len, int flags) =
- (void *) BPF_FUNC_skb_change_head;
-static int (*bpf_skb_pull_data)(void *, int len) =
- (void *) BPF_FUNC_skb_pull_data;
-static unsigned int (*bpf_get_cgroup_classid)(void *ctx) =
- (void *) BPF_FUNC_get_cgroup_classid;
-static unsigned int (*bpf_get_route_realm)(void *ctx) =
- (void *) BPF_FUNC_get_route_realm;
-static int (*bpf_skb_change_proto)(void *ctx, __be16 proto, __u64 flags) =
- (void *) BPF_FUNC_skb_change_proto;
-static int (*bpf_skb_change_type)(void *ctx, __u32 type) =
- (void *) BPF_FUNC_skb_change_type;
-static unsigned int (*bpf_get_hash_recalc)(void *ctx) =
- (void *) BPF_FUNC_get_hash_recalc;
-static unsigned long long (*bpf_get_current_task)(void) =
- (void *) BPF_FUNC_get_current_task;
-static int (*bpf_skb_change_tail)(void *ctx, __u32 len, __u64 flags) =
- (void *) BPF_FUNC_skb_change_tail;
-static long long (*bpf_csum_update)(void *ctx, __u32 csum) =
- (void *) BPF_FUNC_csum_update;
-static void (*bpf_set_hash_invalid)(void *ctx) =
- (void *) BPF_FUNC_set_hash_invalid;
-static int (*bpf_get_numa_node_id)(void) =
- (void *) BPF_FUNC_get_numa_node_id;
-static int (*bpf_probe_read_str)(void *ctx, __u32 size,
- const void *unsafe_ptr) =
- (void *) BPF_FUNC_probe_read_str;
-static unsigned int (*bpf_get_socket_uid)(void *ctx) =
- (void *) BPF_FUNC_get_socket_uid;
-static unsigned int (*bpf_set_hash)(void *ctx, __u32 hash) =
- (void *) BPF_FUNC_set_hash;
-static int (*bpf_skb_adjust_room)(void *ctx, __s32 len_diff, __u32 mode,
- unsigned long long flags) =
- (void *) BPF_FUNC_skb_adjust_room;
-
/*
* Helper structure used by eBPF C program
* to describe BPF map attributes to libbpf loader
diff --git a/tools/lib/bpf/bpf_helpers_defs.h b/tools/lib/bpf/bpf_helpers_defs.h
new file mode 100644
index 000000000000..6255ff043236
--- /dev/null
+++ b/tools/lib/bpf/bpf_helpers_defs.h
@@ -0,0 +1,2677 @@
+/* This is auto-generated file. See bpf_helpers_doc.py for details. */
+
+/* Forward declarations of BPF structs */
+struct bpf_fib_lookup;
+struct bpf_perf_event_data;
+struct bpf_perf_event_value;
+struct bpf_sock;
+struct bpf_sock_addr;
+struct bpf_sock_ops;
+struct bpf_sock_tuple;
+struct bpf_spin_lock;
+struct bpf_sysctl;
+struct bpf_tcp_sock;
+struct bpf_tunnel_key;
+struct bpf_xfrm_state;
+struct pt_regs;
+struct sk_reuseport_md;
+struct sockaddr;
+struct tcphdr;
+struct __sk_buff;
+struct sk_msg_md;
+struct xpd_md;
+
+/*
+ * bpf_map_lookup_elem
+ *
+ * Perform a lookup in *map* for an entry associated to *key*.
+ *
+ * Returns
+ * Map value associated to *key*, or **NULL** if no entry was
+ * found.
+ */
+static void *(*bpf_map_lookup_elem)(void *map, const void *key) = (void *) 1;
+
+/*
+ * bpf_map_update_elem
+ *
+ * Add or update the value of the entry associated to *key* in
+ * *map* with *value*. *flags* is one of:
+ *
+ * **BPF_NOEXIST**
+ * The entry for *key* must not exist in the map.
+ * **BPF_EXIST**
+ * The entry for *key* must already exist in the map.
+ * **BPF_ANY**
+ * No condition on the existence of the entry for *key*.
+ *
+ * Flag value **BPF_NOEXIST** cannot be used for maps of types
+ * **BPF_MAP_TYPE_ARRAY** or **BPF_MAP_TYPE_PERCPU_ARRAY** (all
+ * elements always exist), the helper would return an error.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_map_update_elem)(void *map, const void *key, const void *value, __u64 flags) = (void *) 2;
+
+/*
+ * bpf_map_delete_elem
+ *
+ * Delete entry with *key* from *map*.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_map_delete_elem)(void *map, const void *key) = (void *) 3;
+
+/*
+ * bpf_probe_read
+ *
+ * For tracing programs, safely attempt to read *size* bytes from
+ * address *src* and store the data in *dst*.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_probe_read)(void *dst, __u32 size, const void *src) = (void *) 4;
+
+/*
+ * bpf_ktime_get_ns
+ *
+ * Return the time elapsed since system boot, in nanoseconds.
+ *
+ * Returns
+ * Current *ktime*.
+ */
+static __u64 (*bpf_ktime_get_ns)(void) = (void *) 5;
+
+/*
+ * bpf_trace_printk
+ *
+ * This helper is a "printk()-like" facility for debugging. It
+ * prints a message defined by format *fmt* (of size *fmt_size*)
+ * to file *\/sys/kernel/debug/tracing/trace* from DebugFS, if
+ * available. It can take up to three additional **u64**
+ * arguments (as an eBPF helpers, the total number of arguments is
+ * limited to five).
+ *
+ * Each time the helper is called, it appends a line to the trace.
+ * Lines are discarded while *\/sys/kernel/debug/tracing/trace* is
+ * open, use *\/sys/kernel/debug/tracing/trace_pipe* to avoid this.
+ * The format of the trace is customizable, and the exact output
+ * one will get depends on the options set in
+ * *\/sys/kernel/debug/tracing/trace_options* (see also the
+ * *README* file under the same directory). However, it usually
+ * defaults to something like:
+ *
+ * ::
+ *
+ * telnet-470 [001] .N.. 419421.045894: 0x00000001: <formatted msg>
+ *
+ * In the above:
+ *
+ * * ``telnet`` is the name of the current task.
+ * * ``470`` is the PID of the current task.
+ * * ``001`` is the CPU number on which the task is
+ * running.
+ * * In ``.N..``, each character refers to a set of
+ * options (whether irqs are enabled, scheduling
+ * options, whether hard/softirqs are running, level of
+ * preempt_disabled respectively). **N** means that
+ * **TIF_NEED_RESCHED** and **PREEMPT_NEED_RESCHED**
+ * are set.
+ * * ``419421.045894`` is a timestamp.
+ * * ``0x00000001`` is a fake value used by BPF for the
+ * instruction pointer register.
+ * * ``<formatted msg>`` is the message formatted with
+ * *fmt*.
+ *
+ * The conversion specifiers supported by *fmt* are similar, but
+ * more limited than for printk(). They are **%d**, **%i**,
+ * **%u**, **%x**, **%ld**, **%li**, **%lu**, **%lx**, **%lld**,
+ * **%lli**, **%llu**, **%llx**, **%p**, **%s**. No modifier (size
+ * of field, padding with zeroes, etc.) is available, and the
+ * helper will return **-EINVAL** (but print nothing) if it
+ * encounters an unknown specifier.
+ *
+ * Also, note that **bpf_trace_printk**\ () is slow, and should
+ * only be used for debugging purposes. For this reason, a notice
+ * bloc (spanning several lines) is printed to kernel logs and
+ * states that the helper should not be used "for production use"
+ * the first time this helper is used (or more precisely, when
+ * **trace_printk**\ () buffers are allocated). For passing values
+ * to user space, perf events should be preferred.
+ *
+ * Returns
+ * The number of bytes written to the buffer, or a negative error
+ * in case of failure.
+ */
+static int (*bpf_trace_printk)(const char *fmt, __u32 fmt_size, ...) = (void *) 6;
+
+/*
+ * bpf_get_prandom_u32
+ *
+ * Get a pseudo-random number.
+ *
+ * From a security point of view, this helper uses its own
+ * pseudo-random internal state, and cannot be used to infer the
+ * seed of other random functions in the kernel. However, it is
+ * essential to note that the generator used by the helper is not
+ * cryptographically secure.
+ *
+ * Returns
+ * A random 32-bit unsigned value.
+ */
+static __u32 (*bpf_get_prandom_u32)(void) = (void *) 7;
+
+/*
+ * bpf_get_smp_processor_id
+ *
+ * Get the SMP (symmetric multiprocessing) processor id. Note that
+ * all programs run with preemption disabled, which means that the
+ * SMP processor id is stable during all the execution of the
+ * program.
+ *
+ * Returns
+ * The SMP id of the processor running the program.
+ */
+static __u32 (*bpf_get_smp_processor_id)(void) = (void *) 8;
+
+/*
+ * bpf_skb_store_bytes
+ *
+ * Store *len* bytes from address *from* into the packet
+ * associated to *skb*, at *offset*. *flags* are a combination of
+ * **BPF_F_RECOMPUTE_CSUM** (automatically recompute the
+ * checksum for the packet after storing the bytes) and
+ * **BPF_F_INVALIDATE_HASH** (set *skb*\ **->hash**, *skb*\
+ * **->swhash** and *skb*\ **->l4hash** to 0).
+ *
+ * A call to this helper is susceptible to change the underlying
+ * packet buffer. Therefore, at load time, all checks on pointers
+ * previously done by the verifier are invalidated and must be
+ * performed again, if the helper is used in combination with
+ * direct packet access.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_skb_store_bytes)(struct __sk_buff *skb, __u32 offset, const void *from, __u32 len, __u64 flags) = (void *) 9;
+
+/*
+ * bpf_l3_csum_replace
+ *
+ * Recompute the layer 3 (e.g. IP) checksum for the packet
+ * associated to *skb*. Computation is incremental, so the helper
+ * must know the former value of the header field that was
+ * modified (*from*), the new value of this field (*to*), and the
+ * number of bytes (2 or 4) for this field, stored in *size*.
+ * Alternatively, it is possible to store the difference between
+ * the previous and the new values of the header field in *to*, by
+ * setting *from* and *size* to 0. For both methods, *offset*
+ * indicates the location of the IP checksum within the packet.
+ *
+ * This helper works in combination with **bpf_csum_diff**\ (),
+ * which does not update the checksum in-place, but offers more
+ * flexibility and can handle sizes larger than 2 or 4 for the
+ * checksum to update.
+ *
+ * A call to this helper is susceptible to change the underlying
+ * packet buffer. Therefore, at load time, all checks on pointers
+ * previously done by the verifier are invalidated and must be
+ * performed again, if the helper is used in combination with
+ * direct packet access.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_l3_csum_replace)(struct __sk_buff *skb, __u32 offset, __u64 from, __u64 to, __u64 size) = (void *) 10;
+
+/*
+ * bpf_l4_csum_replace
+ *
+ * Recompute the layer 4 (e.g. TCP, UDP or ICMP) checksum for the
+ * packet associated to *skb*. Computation is incremental, so the
+ * helper must know the former value of the header field that was
+ * modified (*from*), the new value of this field (*to*), and the
+ * number of bytes (2 or 4) for this field, stored on the lowest
+ * four bits of *flags*. Alternatively, it is possible to store
+ * the difference between the previous and the new values of the
+ * header field in *to*, by setting *from* and the four lowest
+ * bits of *flags* to 0. For both methods, *offset* indicates the
+ * location of the IP checksum within the packet. In addition to
+ * the size of the field, *flags* can be added (bitwise OR) actual
+ * flags. With **BPF_F_MARK_MANGLED_0**, a null checksum is left
+ * untouched (unless **BPF_F_MARK_ENFORCE** is added as well), and
+ * for updates resulting in a null checksum the value is set to
+ * **CSUM_MANGLED_0** instead. Flag **BPF_F_PSEUDO_HDR** indicates
+ * the checksum is to be computed against a pseudo-header.
+ *
+ * This helper works in combination with **bpf_csum_diff**\ (),
+ * which does not update the checksum in-place, but offers more
+ * flexibility and can handle sizes larger than 2 or 4 for the
+ * checksum to update.
+ *
+ * A call to this helper is susceptible to change the underlying
+ * packet buffer. Therefore, at load time, all checks on pointers
+ * previously done by the verifier are invalidated and must be
+ * performed again, if the helper is used in combination with
+ * direct packet access.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_l4_csum_replace)(struct __sk_buff *skb, __u32 offset, __u64 from, __u64 to, __u64 flags) = (void *) 11;
+
+/*
+ * bpf_tail_call
+ *
+ * This special helper is used to trigger a "tail call", or in
+ * other words, to jump into another eBPF program. The same stack
+ * frame is used (but values on stack and in registers for the
+ * caller are not accessible to the callee). This mechanism allows
+ * for program chaining, either for raising the maximum number of
+ * available eBPF instructions, or to execute given programs in
+ * conditional blocks. For security reasons, there is an upper
+ * limit to the number of successive tail calls that can be
+ * performed.
+ *
+ * Upon call of this helper, the program attempts to jump into a
+ * program referenced at index *index* in *prog_array_map*, a
+ * special map of type **BPF_MAP_TYPE_PROG_ARRAY**, and passes
+ * *ctx*, a pointer to the context.
+ *
+ * If the call succeeds, the kernel immediately runs the first
+ * instruction of the new program. This is not a function call,
+ * and it never returns to the previous program. If the call
+ * fails, then the helper has no effect, and the caller continues
+ * to run its subsequent instructions. A call can fail if the
+ * destination program for the jump does not exist (i.e. *index*
+ * is superior to the number of entries in *prog_array_map*), or
+ * if the maximum number of tail calls has been reached for this
+ * chain of programs. This limit is defined in the kernel by the
+ * macro **MAX_TAIL_CALL_CNT** (not accessible to user space),
+ * which is currently set to 32.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_tail_call)(void *ctx, void *prog_array_map, __u32 index) = (void *) 12;
+
+/*
+ * bpf_clone_redirect
+ *
+ * Clone and redirect the packet associated to *skb* to another
+ * net device of index *ifindex*. Both ingress and egress
+ * interfaces can be used for redirection. The **BPF_F_INGRESS**
+ * value in *flags* is used to make the distinction (ingress path
+ * is selected if the flag is present, egress path otherwise).
+ * This is the only flag supported for now.
+ *
+ * In comparison with **bpf_redirect**\ () helper,
+ * **bpf_clone_redirect**\ () has the associated cost of
+ * duplicating the packet buffer, but this can be executed out of
+ * the eBPF program. Conversely, **bpf_redirect**\ () is more
+ * efficient, but it is handled through an action code where the
+ * redirection happens only after the eBPF program has returned.
+ *
+ * A call to this helper is susceptible to change the underlying
+ * packet buffer. Therefore, at load time, all checks on pointers
+ * previously done by the verifier are invalidated and must be
+ * performed again, if the helper is used in combination with
+ * direct packet access.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_clone_redirect)(struct __sk_buff *skb, __u32 ifindex, __u64 flags) = (void *) 13;
+
+/*
+ * bpf_get_current_pid_tgid
+ *
+ *
+ * Returns
+ * A 64-bit integer containing the current tgid and pid, and
+ * created as such:
+ * *current_task*\ **->tgid << 32 \|**
+ * *current_task*\ **->pid**.
+ */
+static __u64 (*bpf_get_current_pid_tgid)(void) = (void *) 14;
+
+/*
+ * bpf_get_current_uid_gid
+ *
+ *
+ * Returns
+ * A 64-bit integer containing the current GID and UID, and
+ * created as such: *current_gid* **<< 32 \|** *current_uid*.
+ */
+static __u64 (*bpf_get_current_uid_gid)(void) = (void *) 15;
+
+/*
+ * bpf_get_current_comm
+ *
+ * Copy the **comm** attribute of the current task into *buf* of
+ * *size_of_buf*. The **comm** attribute contains the name of
+ * the executable (excluding the path) for the current task. The
+ * *size_of_buf* must be strictly positive. On success, the
+ * helper makes sure that the *buf* is NUL-terminated. On failure,
+ * it is filled with zeroes.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_get_current_comm)(void *buf, __u32 size_of_buf) = (void *) 16;
+
+/*
+ * bpf_get_cgroup_classid
+ *
+ * Retrieve the classid for the current task, i.e. for the net_cls
+ * cgroup to which *skb* belongs.
+ *
+ * This helper can be used on TC egress path, but not on ingress.
+ *
+ * The net_cls cgroup provides an interface to tag network packets
+ * based on a user-provided identifier for all traffic coming from
+ * the tasks belonging to the related cgroup. See also the related
+ * kernel documentation, available from the Linux sources in file
+ * *Documentation/admin-guide/cgroup-v1/net_cls.rst*.
+ *
+ * The Linux kernel has two versions for cgroups: there are
+ * cgroups v1 and cgroups v2. Both are available to users, who can
+ * use a mixture of them, but note that the net_cls cgroup is for
+ * cgroup v1 only. This makes it incompatible with BPF programs
+ * run on cgroups, which is a cgroup-v2-only feature (a socket can
+ * only hold data for one version of cgroups at a time).
+ *
+ * This helper is only available is the kernel was compiled with
+ * the **CONFIG_CGROUP_NET_CLASSID** configuration option set to
+ * "**y**" or to "**m**".
+ *
+ * Returns
+ * The classid, or 0 for the default unconfigured classid.
+ */
+static __u32 (*bpf_get_cgroup_classid)(struct __sk_buff *skb) = (void *) 17;
+
+/*
+ * bpf_skb_vlan_push
+ *
+ * Push a *vlan_tci* (VLAN tag control information) of protocol
+ * *vlan_proto* to the packet associated to *skb*, then update
+ * the checksum. Note that if *vlan_proto* is different from
+ * **ETH_P_8021Q** and **ETH_P_8021AD**, it is considered to
+ * be **ETH_P_8021Q**.
+ *
+ * A call to this helper is susceptible to change the underlying
+ * packet buffer. Therefore, at load time, all checks on pointers
+ * previously done by the verifier are invalidated and must be
+ * performed again, if the helper is used in combination with
+ * direct packet access.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_skb_vlan_push)(struct __sk_buff *skb, __be16 vlan_proto, __u16 vlan_tci) = (void *) 18;
+
+/*
+ * bpf_skb_vlan_pop
+ *
+ * Pop a VLAN header from the packet associated to *skb*.
+ *
+ * A call to this helper is susceptible to change the underlying
+ * packet buffer. Therefore, at load time, all checks on pointers
+ * previously done by the verifier are invalidated and must be
+ * performed again, if the helper is used in combination with
+ * direct packet access.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_skb_vlan_pop)(struct __sk_buff *skb) = (void *) 19;
+
+/*
+ * bpf_skb_get_tunnel_key
+ *
+ * Get tunnel metadata. This helper takes a pointer *key* to an
+ * empty **struct bpf_tunnel_key** of **size**, that will be
+ * filled with tunnel metadata for the packet associated to *skb*.
+ * The *flags* can be set to **BPF_F_TUNINFO_IPV6**, which
+ * indicates that the tunnel is based on IPv6 protocol instead of
+ * IPv4.
+ *
+ * The **struct bpf_tunnel_key** is an object that generalizes the
+ * principal parameters used by various tunneling protocols into a
+ * single struct. This way, it can be used to easily make a
+ * decision based on the contents of the encapsulation header,
+ * "summarized" in this struct. In particular, it holds the IP
+ * address of the remote end (IPv4 or IPv6, depending on the case)
+ * in *key*\ **->remote_ipv4** or *key*\ **->remote_ipv6**. Also,
+ * this struct exposes the *key*\ **->tunnel_id**, which is
+ * generally mapped to a VNI (Virtual Network Identifier), making
+ * it programmable together with the **bpf_skb_set_tunnel_key**\
+ * () helper.
+ *
+ * Let's imagine that the following code is part of a program
+ * attached to the TC ingress interface, on one end of a GRE
+ * tunnel, and is supposed to filter out all messages coming from
+ * remote ends with IPv4 address other than 10.0.0.1:
+ *
+ * ::
+ *
+ * int ret;
+ * struct bpf_tunnel_key key = {};
+ *
+ * ret = bpf_skb_get_tunnel_key(skb, &key, sizeof(key), 0);
+ * if (ret < 0)
+ * return TC_ACT_SHOT; // drop packet
+ *
+ * if (key.remote_ipv4 != 0x0a000001)
+ * return TC_ACT_SHOT; // drop packet
+ *
+ * return TC_ACT_OK; // accept packet
+ *
+ * This interface can also be used with all encapsulation devices
+ * that can operate in "collect metadata" mode: instead of having
+ * one network device per specific configuration, the "collect
+ * metadata" mode only requires a single device where the
+ * configuration can be extracted from this helper.
+ *
+ * This can be used together with various tunnels such as VXLan,
+ * Geneve, GRE or IP in IP (IPIP).
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_skb_get_tunnel_key)(struct __sk_buff *skb, struct bpf_tunnel_key *key, __u32 size, __u64 flags) = (void *) 20;
+
+/*
+ * bpf_skb_set_tunnel_key
+ *
+ * Populate tunnel metadata for packet associated to *skb.* The
+ * tunnel metadata is set to the contents of *key*, of *size*. The
+ * *flags* can be set to a combination of the following values:
+ *
+ * **BPF_F_TUNINFO_IPV6**
+ * Indicate that the tunnel is based on IPv6 protocol
+ * instead of IPv4.
+ * **BPF_F_ZERO_CSUM_TX**
+ * For IPv4 packets, add a flag to tunnel metadata
+ * indicating that checksum computation should be skipped
+ * and checksum set to zeroes.
+ * **BPF_F_DONT_FRAGMENT**
+ * Add a flag to tunnel metadata indicating that the
+ * packet should not be fragmented.
+ * **BPF_F_SEQ_NUMBER**
+ * Add a flag to tunnel metadata indicating that a
+ * sequence number should be added to tunnel header before
+ * sending the packet. This flag was added for GRE
+ * encapsulation, but might be used with other protocols
+ * as well in the future.
+ *
+ * Here is a typical usage on the transmit path:
+ *
+ * ::
+ *
+ * struct bpf_tunnel_key key;
+ * populate key ...
+ * bpf_skb_set_tunnel_key(skb, &key, sizeof(key), 0);
+ * bpf_clone_redirect(skb, vxlan_dev_ifindex, 0);
+ *
+ * See also the description of the **bpf_skb_get_tunnel_key**\ ()
+ * helper for additional information.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_skb_set_tunnel_key)(struct __sk_buff *skb, struct bpf_tunnel_key *key, __u32 size, __u64 flags) = (void *) 21;
+
+/*
+ * bpf_perf_event_read
+ *
+ * Read the value of a perf event counter. This helper relies on a
+ * *map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. The nature of
+ * the perf event counter is selected when *map* is updated with
+ * perf event file descriptors. The *map* is an array whose size
+ * is the number of available CPUs, and each cell contains a value
+ * relative to one CPU. The value to retrieve is indicated by
+ * *flags*, that contains the index of the CPU to look up, masked
+ * with **BPF_F_INDEX_MASK**. Alternatively, *flags* can be set to
+ * **BPF_F_CURRENT_CPU** to indicate that the value for the
+ * current CPU should be retrieved.
+ *
+ * Note that before Linux 4.13, only hardware perf event can be
+ * retrieved.
+ *
+ * Also, be aware that the newer helper
+ * **bpf_perf_event_read_value**\ () is recommended over
+ * **bpf_perf_event_read**\ () in general. The latter has some ABI
+ * quirks where error and counter value are used as a return code
+ * (which is wrong to do since ranges may overlap). This issue is
+ * fixed with **bpf_perf_event_read_value**\ (), which at the same
+ * time provides more features over the **bpf_perf_event_read**\
+ * () interface. Please refer to the description of
+ * **bpf_perf_event_read_value**\ () for details.
+ *
+ * Returns
+ * The value of the perf event counter read from the map, or a
+ * negative error code in case of failure.
+ */
+static __u64 (*bpf_perf_event_read)(void *map, __u64 flags) = (void *) 22;
+
+/*
+ * bpf_redirect
+ *
+ * Redirect the packet to another net device of index *ifindex*.
+ * This helper is somewhat similar to **bpf_clone_redirect**\
+ * (), except that the packet is not cloned, which provides
+ * increased performance.
+ *
+ * Except for XDP, both ingress and egress interfaces can be used
+ * for redirection. The **BPF_F_INGRESS** value in *flags* is used
+ * to make the distinction (ingress path is selected if the flag
+ * is present, egress path otherwise). Currently, XDP only
+ * supports redirection to the egress interface, and accepts no
+ * flag at all.
+ *
+ * The same effect can be attained with the more generic
+ * **bpf_redirect_map**\ (), which requires specific maps to be
+ * used but offers better performance.
+ *
+ * Returns
+ * For XDP, the helper returns **XDP_REDIRECT** on success or
+ * **XDP_ABORTED** on error. For other program types, the values
+ * are **TC_ACT_REDIRECT** on success or **TC_ACT_SHOT** on
+ * error.
+ */
+static int (*bpf_redirect)(__u32 ifindex, __u64 flags) = (void *) 23;
+
+/*
+ * bpf_get_route_realm
+ *
+ * Retrieve the realm or the route, that is to say the
+ * **tclassid** field of the destination for the *skb*. The
+ * indentifier retrieved is a user-provided tag, similar to the
+ * one used with the net_cls cgroup (see description for
+ * **bpf_get_cgroup_classid**\ () helper), but here this tag is
+ * held by a route (a destination entry), not by a task.
+ *
+ * Retrieving this identifier works with the clsact TC egress hook
+ * (see also **tc-bpf(8)**), or alternatively on conventional
+ * classful egress qdiscs, but not on TC ingress path. In case of
+ * clsact TC egress hook, this has the advantage that, internally,
+ * the destination entry has not been dropped yet in the transmit
+ * path. Therefore, the destination entry does not need to be
+ * artificially held via **netif_keep_dst**\ () for a classful
+ * qdisc until the *skb* is freed.
+ *
+ * This helper is available only if the kernel was compiled with
+ * **CONFIG_IP_ROUTE_CLASSID** configuration option.
+ *
+ * Returns
+ * The realm of the route for the packet associated to *skb*, or 0
+ * if none was found.
+ */
+static __u32 (*bpf_get_route_realm)(struct __sk_buff *skb) = (void *) 24;
+
+/*
+ * bpf_perf_event_output
+ *
+ * Write raw *data* blob into a special BPF perf event held by
+ * *map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. This perf
+ * event must have the following attributes: **PERF_SAMPLE_RAW**
+ * as **sample_type**, **PERF_TYPE_SOFTWARE** as **type**, and
+ * **PERF_COUNT_SW_BPF_OUTPUT** as **config**.
+ *
+ * The *flags* are used to indicate the index in *map* for which
+ * the value must be put, masked with **BPF_F_INDEX_MASK**.
+ * Alternatively, *flags* can be set to **BPF_F_CURRENT_CPU**
+ * to indicate that the index of the current CPU core should be
+ * used.
+ *
+ * The value to write, of *size*, is passed through eBPF stack and
+ * pointed by *data*.
+ *
+ * The context of the program *ctx* needs also be passed to the
+ * helper.
+ *
+ * On user space, a program willing to read the values needs to
+ * call **perf_event_open**\ () on the perf event (either for
+ * one or for all CPUs) and to store the file descriptor into the
+ * *map*. This must be done before the eBPF program can send data
+ * into it. An example is available in file
+ * *samples/bpf/trace_output_user.c* in the Linux kernel source
+ * tree (the eBPF program counterpart is in
+ * *samples/bpf/trace_output_kern.c*).
+ *
+ * **bpf_perf_event_output**\ () achieves better performance
+ * than **bpf_trace_printk**\ () for sharing data with user
+ * space, and is much better suitable for streaming data from eBPF
+ * programs.
+ *
+ * Note that this helper is not restricted to tracing use cases
+ * and can be used with programs attached to TC or XDP as well,
+ * where it allows for passing data to user space listeners. Data
+ * can be:
+ *
+ * * Only custom structs,
+ * * Only the packet payload, or
+ * * A combination of both.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_perf_event_output)(void *ctx, void *map, __u64 flags, void *data, __u64 size) = (void *) 25;
+
+/*
+ * bpf_skb_load_bytes
+ *
+ * This helper was provided as an easy way to load data from a
+ * packet. It can be used to load *len* bytes from *offset* from
+ * the packet associated to *skb*, into the buffer pointed by
+ * *to*.
+ *
+ * Since Linux 4.7, usage of this helper has mostly been replaced
+ * by "direct packet access", enabling packet data to be
+ * manipulated with *skb*\ **->data** and *skb*\ **->data_end**
+ * pointing respectively to the first byte of packet data and to
+ * the byte after the last byte of packet data. However, it
+ * remains useful if one wishes to read large quantities of data
+ * at once from a packet into the eBPF stack.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_skb_load_bytes)(const void *skb, __u32 offset, void *to, __u32 len) = (void *) 26;
+
+/*
+ * bpf_get_stackid
+ *
+ * Walk a user or a kernel stack and return its id. To achieve
+ * this, the helper needs *ctx*, which is a pointer to the context
+ * on which the tracing program is executed, and a pointer to a
+ * *map* of type **BPF_MAP_TYPE_STACK_TRACE**.
+ *
+ * The last argument, *flags*, holds the number of stack frames to
+ * skip (from 0 to 255), masked with
+ * **BPF_F_SKIP_FIELD_MASK**. The next bits can be used to set
+ * a combination of the following flags:
+ *
+ * **BPF_F_USER_STACK**
+ * Collect a user space stack instead of a kernel stack.
+ * **BPF_F_FAST_STACK_CMP**
+ * Compare stacks by hash only.
+ * **BPF_F_REUSE_STACKID**
+ * If two different stacks hash into the same *stackid*,
+ * discard the old one.
+ *
+ * The stack id retrieved is a 32 bit long integer handle which
+ * can be further combined with other data (including other stack
+ * ids) and used as a key into maps. This can be useful for
+ * generating a variety of graphs (such as flame graphs or off-cpu
+ * graphs).
+ *
+ * For walking a stack, this helper is an improvement over
+ * **bpf_probe_read**\ (), which can be used with unrolled loops
+ * but is not efficient and consumes a lot of eBPF instructions.
+ * Instead, **bpf_get_stackid**\ () can collect up to
+ * **PERF_MAX_STACK_DEPTH** both kernel and user frames. Note that
+ * this limit can be controlled with the **sysctl** program, and
+ * that it should be manually increased in order to profile long
+ * user stacks (such as stacks for Java programs). To do so, use:
+ *
+ * ::
+ *
+ * # sysctl kernel.perf_event_max_stack=<new value>
+ *
+ * Returns
+ * The positive or null stack id on success, or a negative error
+ * in case of failure.
+ */
+static int (*bpf_get_stackid)(void *ctx, void *map, __u64 flags) = (void *) 27;
+
+/*
+ * bpf_csum_diff
+ *
+ * Compute a checksum difference, from the raw buffer pointed by
+ * *from*, of length *from_size* (that must be a multiple of 4),
+ * towards the raw buffer pointed by *to*, of size *to_size*
+ * (same remark). An optional *seed* can be added to the value
+ * (this can be cascaded, the seed may come from a previous call
+ * to the helper).
+ *
+ * This is flexible enough to be used in several ways:
+ *
+ * * With *from_size* == 0, *to_size* > 0 and *seed* set to
+ * checksum, it can be used when pushing new data.
+ * * With *from_size* > 0, *to_size* == 0 and *seed* set to
+ * checksum, it can be used when removing data from a packet.
+ * * With *from_size* > 0, *to_size* > 0 and *seed* set to 0, it
+ * can be used to compute a diff. Note that *from_size* and
+ * *to_size* do not need to be equal.
+ *
+ * This helper can be used in combination with
+ * **bpf_l3_csum_replace**\ () and **bpf_l4_csum_replace**\ (), to
+ * which one can feed in the difference computed with
+ * **bpf_csum_diff**\ ().
+ *
+ * Returns
+ * The checksum result, or a negative error code in case of
+ * failure.
+ */
+static __s64 (*bpf_csum_diff)(__be32 *from, __u32 from_size, __be32 *to, __u32 to_size, __wsum seed) = (void *) 28;
+
+/*
+ * bpf_skb_get_tunnel_opt
+ *
+ * Retrieve tunnel options metadata for the packet associated to
+ * *skb*, and store the raw tunnel option data to the buffer *opt*
+ * of *size*.
+ *
+ * This helper can be used with encapsulation devices that can
+ * operate in "collect metadata" mode (please refer to the related
+ * note in the description of **bpf_skb_get_tunnel_key**\ () for
+ * more details). A particular example where this can be used is
+ * in combination with the Geneve encapsulation protocol, where it
+ * allows for pushing (with **bpf_skb_get_tunnel_opt**\ () helper)
+ * and retrieving arbitrary TLVs (Type-Length-Value headers) from
+ * the eBPF program. This allows for full customization of these
+ * headers.
+ *
+ * Returns
+ * The size of the option data retrieved.
+ */
+static int (*bpf_skb_get_tunnel_opt)(struct __sk_buff *skb, void *opt, __u32 size) = (void *) 29;
+
+/*
+ * bpf_skb_set_tunnel_opt
+ *
+ * Set tunnel options metadata for the packet associated to *skb*
+ * to the option data contained in the raw buffer *opt* of *size*.
+ *
+ * See also the description of the **bpf_skb_get_tunnel_opt**\ ()
+ * helper for additional information.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_skb_set_tunnel_opt)(struct __sk_buff *skb, void *opt, __u32 size) = (void *) 30;
+
+/*
+ * bpf_skb_change_proto
+ *
+ * Change the protocol of the *skb* to *proto*. Currently
+ * supported are transition from IPv4 to IPv6, and from IPv6 to
+ * IPv4. The helper takes care of the groundwork for the
+ * transition, including resizing the socket buffer. The eBPF
+ * program is expected to fill the new headers, if any, via
+ * **skb_store_bytes**\ () and to recompute the checksums with
+ * **bpf_l3_csum_replace**\ () and **bpf_l4_csum_replace**\
+ * (). The main case for this helper is to perform NAT64
+ * operations out of an eBPF program.
+ *
+ * Internally, the GSO type is marked as dodgy so that headers are
+ * checked and segments are recalculated by the GSO/GRO engine.
+ * The size for GSO target is adapted as well.
+ *
+ * All values for *flags* are reserved for future usage, and must
+ * be left at zero.
+ *
+ * A call to this helper is susceptible to change the underlying
+ * packet buffer. Therefore, at load time, all checks on pointers
+ * previously done by the verifier are invalidated and must be
+ * performed again, if the helper is used in combination with
+ * direct packet access.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_skb_change_proto)(struct __sk_buff *skb, __be16 proto, __u64 flags) = (void *) 31;
+
+/*
+ * bpf_skb_change_type
+ *
+ * Change the packet type for the packet associated to *skb*. This
+ * comes down to setting *skb*\ **->pkt_type** to *type*, except
+ * the eBPF program does not have a write access to *skb*\
+ * **->pkt_type** beside this helper. Using a helper here allows
+ * for graceful handling of errors.
+ *
+ * The major use case is to change incoming *skb*s to
+ * **PACKET_HOST** in a programmatic way instead of having to
+ * recirculate via **redirect**\ (..., **BPF_F_INGRESS**), for
+ * example.
+ *
+ * Note that *type* only allows certain values. At this time, they
+ * are:
+ *
+ * **PACKET_HOST**
+ * Packet is for us.
+ * **PACKET_BROADCAST**
+ * Send packet to all.
+ * **PACKET_MULTICAST**
+ * Send packet to group.
+ * **PACKET_OTHERHOST**
+ * Send packet to someone else.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_skb_change_type)(struct __sk_buff *skb, __u32 type) = (void *) 32;
+
+/*
+ * bpf_skb_under_cgroup
+ *
+ * Check whether *skb* is a descendant of the cgroup2 held by
+ * *map* of type **BPF_MAP_TYPE_CGROUP_ARRAY**, at *index*.
+ *
+ * Returns
+ * The return value depends on the result of the test, and can be:
+ *
+ * * 0, if the *skb* failed the cgroup2 descendant test.
+ * * 1, if the *skb* succeeded the cgroup2 descendant test.
+ * * A negative error code, if an error occurred.
+ */
+static int (*bpf_skb_under_cgroup)(struct __sk_buff *skb, void *map, __u32 index) = (void *) 33;
+
+/*
+ * bpf_get_hash_recalc
+ *
+ * Retrieve the hash of the packet, *skb*\ **->hash**. If it is
+ * not set, in particular if the hash was cleared due to mangling,
+ * recompute this hash. Later accesses to the hash can be done
+ * directly with *skb*\ **->hash**.
+ *
+ * Calling **bpf_set_hash_invalid**\ (), changing a packet
+ * prototype with **bpf_skb_change_proto**\ (), or calling
+ * **bpf_skb_store_bytes**\ () with the
+ * **BPF_F_INVALIDATE_HASH** are actions susceptible to clear
+ * the hash and to trigger a new computation for the next call to
+ * **bpf_get_hash_recalc**\ ().
+ *
+ * Returns
+ * The 32-bit hash.
+ */
+static __u32 (*bpf_get_hash_recalc)(struct __sk_buff *skb) = (void *) 34;
+
+/*
+ * bpf_get_current_task
+ *
+ *
+ * Returns
+ * A pointer to the current task struct.
+ */
+static __u64 (*bpf_get_current_task)(void) = (void *) 35;
+
+/*
+ * bpf_probe_write_user
+ *
+ * Attempt in a safe way to write *len* bytes from the buffer
+ * *src* to *dst* in memory. It only works for threads that are in
+ * user context, and *dst* must be a valid user space address.
+ *
+ * This helper should not be used to implement any kind of
+ * security mechanism because of TOC-TOU attacks, but rather to
+ * debug, divert, and manipulate execution of semi-cooperative
+ * processes.
+ *
+ * Keep in mind that this feature is meant for experiments, and it
+ * has a risk of crashing the system and running programs.
+ * Therefore, when an eBPF program using this helper is attached,
+ * a warning including PID and process name is printed to kernel
+ * logs.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_probe_write_user)(void *dst, const void *src, __u32 len) = (void *) 36;
+
+/*
+ * bpf_current_task_under_cgroup
+ *
+ * Check whether the probe is being run is the context of a given
+ * subset of the cgroup2 hierarchy. The cgroup2 to test is held by
+ * *map* of type **BPF_MAP_TYPE_CGROUP_ARRAY**, at *index*.
+ *
+ * Returns
+ * The return value depends on the result of the test, and can be:
+ *
+ * * 0, if the *skb* task belongs to the cgroup2.
+ * * 1, if the *skb* task does not belong to the cgroup2.
+ * * A negative error code, if an error occurred.
+ */
+static int (*bpf_current_task_under_cgroup)(void *map, __u32 index) = (void *) 37;
+
+/*
+ * bpf_skb_change_tail
+ *
+ * Resize (trim or grow) the packet associated to *skb* to the
+ * new *len*. The *flags* are reserved for future usage, and must
+ * be left at zero.
+ *
+ * The basic idea is that the helper performs the needed work to
+ * change the size of the packet, then the eBPF program rewrites
+ * the rest via helpers like **bpf_skb_store_bytes**\ (),
+ * **bpf_l3_csum_replace**\ (), **bpf_l3_csum_replace**\ ()
+ * and others. This helper is a slow path utility intended for
+ * replies with control messages. And because it is targeted for
+ * slow path, the helper itself can afford to be slow: it
+ * implicitly linearizes, unclones and drops offloads from the
+ * *skb*.
+ *
+ * A call to this helper is susceptible to change the underlying
+ * packet buffer. Therefore, at load time, all checks on pointers
+ * previously done by the verifier are invalidated and must be
+ * performed again, if the helper is used in combination with
+ * direct packet access.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_skb_change_tail)(struct __sk_buff *skb, __u32 len, __u64 flags) = (void *) 38;
+
+/*
+ * bpf_skb_pull_data
+ *
+ * Pull in non-linear data in case the *skb* is non-linear and not
+ * all of *len* are part of the linear section. Make *len* bytes
+ * from *skb* readable and writable. If a zero value is passed for
+ * *len*, then the whole length of the *skb* is pulled.
+ *
+ * This helper is only needed for reading and writing with direct
+ * packet access.
+ *
+ * For direct packet access, testing that offsets to access
+ * are within packet boundaries (test on *skb*\ **->data_end**) is
+ * susceptible to fail if offsets are invalid, or if the requested
+ * data is in non-linear parts of the *skb*. On failure the
+ * program can just bail out, or in the case of a non-linear
+ * buffer, use a helper to make the data available. The
+ * **bpf_skb_load_bytes**\ () helper is a first solution to access
+ * the data. Another one consists in using **bpf_skb_pull_data**
+ * to pull in once the non-linear parts, then retesting and
+ * eventually access the data.
+ *
+ * At the same time, this also makes sure the *skb* is uncloned,
+ * which is a necessary condition for direct write. As this needs
+ * to be an invariant for the write part only, the verifier
+ * detects writes and adds a prologue that is calling
+ * **bpf_skb_pull_data()** to effectively unclone the *skb* from
+ * the very beginning in case it is indeed cloned.
+ *
+ * A call to this helper is susceptible to change the underlying
+ * packet buffer. Therefore, at load time, all checks on pointers
+ * previously done by the verifier are invalidated and must be
+ * performed again, if the helper is used in combination with
+ * direct packet access.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_skb_pull_data)(struct __sk_buff *skb, __u32 len) = (void *) 39;
+
+/*
+ * bpf_csum_update
+ *
+ * Add the checksum *csum* into *skb*\ **->csum** in case the
+ * driver has supplied a checksum for the entire packet into that
+ * field. Return an error otherwise. This helper is intended to be
+ * used in combination with **bpf_csum_diff**\ (), in particular
+ * when the checksum needs to be updated after data has been
+ * written into the packet through direct packet access.
+ *
+ * Returns
+ * The checksum on success, or a negative error code in case of
+ * failure.
+ */
+static __s64 (*bpf_csum_update)(struct __sk_buff *skb, __wsum csum) = (void *) 40;
+
+/*
+ * bpf_set_hash_invalid
+ *
+ * Invalidate the current *skb*\ **->hash**. It can be used after
+ * mangling on headers through direct packet access, in order to
+ * indicate that the hash is outdated and to trigger a
+ * recalculation the next time the kernel tries to access this
+ * hash or when the **bpf_get_hash_recalc**\ () helper is called.
+ *
+ */
+static void (*bpf_set_hash_invalid)(struct __sk_buff *skb) = (void *) 41;
+
+/*
+ * bpf_get_numa_node_id
+ *
+ * Return the id of the current NUMA node. The primary use case
+ * for this helper is the selection of sockets for the local NUMA
+ * node, when the program is attached to sockets using the
+ * **SO_ATTACH_REUSEPORT_EBPF** option (see also **socket(7)**),
+ * but the helper is also available to other eBPF program types,
+ * similarly to **bpf_get_smp_processor_id**\ ().
+ *
+ * Returns
+ * The id of current NUMA node.
+ */
+static int (*bpf_get_numa_node_id)(void) = (void *) 42;
+
+/*
+ * bpf_skb_change_head
+ *
+ * Grows headroom of packet associated to *skb* and adjusts the
+ * offset of the MAC header accordingly, adding *len* bytes of
+ * space. It automatically extends and reallocates memory as
+ * required.
+ *
+ * This helper can be used on a layer 3 *skb* to push a MAC header
+ * for redirection into a layer 2 device.
+ *
+ * All values for *flags* are reserved for future usage, and must
+ * be left at zero.
+ *
+ * A call to this helper is susceptible to change the underlying
+ * packet buffer. Therefore, at load time, all checks on pointers
+ * previously done by the verifier are invalidated and must be
+ * performed again, if the helper is used in combination with
+ * direct packet access.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_skb_change_head)(struct __sk_buff *skb, __u32 len, __u64 flags) = (void *) 43;
+
+/*
+ * bpf_xdp_adjust_head
+ *
+ * Adjust (move) *xdp_md*\ **->data** by *delta* bytes. Note that
+ * it is possible to use a negative value for *delta*. This helper
+ * can be used to prepare the packet for pushing or popping
+ * headers.
+ *
+ * A call to this helper is susceptible to change the underlying
+ * packet buffer. Therefore, at load time, all checks on pointers
+ * previously done by the verifier are invalidated and must be
+ * performed again, if the helper is used in combination with
+ * direct packet access.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_xdp_adjust_head)(struct xdp_md *xdp_md, int delta) = (void *) 44;
+
+/*
+ * bpf_probe_read_str
+ *
+ * Copy a NUL terminated string from an unsafe address
+ * *unsafe_ptr* to *dst*. The *size* should include the
+ * terminating NUL byte. In case the string length is smaller than
+ * *size*, the target is not padded with further NUL bytes. If the
+ * string length is larger than *size*, just *size*-1 bytes are
+ * copied and the last byte is set to NUL.
+ *
+ * On success, the length of the copied string is returned. This
+ * makes this helper useful in tracing programs for reading
+ * strings, and more importantly to get its length at runtime. See
+ * the following snippet:
+ *
+ * ::
+ *
+ * SEC("kprobe/sys_open")
+ * void bpf_sys_open(struct pt_regs *ctx)
+ * {
+ * char buf[PATHLEN]; // PATHLEN is defined to 256
+ * int res = bpf_probe_read_str(buf, sizeof(buf),
+ * ctx->di);
+ *
+ * // Consume buf, for example push it to
+ * // userspace via bpf_perf_event_output(); we
+ * // can use res (the string length) as event
+ * // size, after checking its boundaries.
+ * }
+ *
+ * In comparison, using **bpf_probe_read()** helper here instead
+ * to read the string would require to estimate the length at
+ * compile time, and would often result in copying more memory
+ * than necessary.
+ *
+ * Another useful use case is when parsing individual process
+ * arguments or individual environment variables navigating
+ * *current*\ **->mm->arg_start** and *current*\
+ * **->mm->env_start**: using this helper and the return value,
+ * one can quickly iterate at the right offset of the memory area.
+ *
+ * Returns
+ * On success, the strictly positive length of the string,
+ * including the trailing NUL character. On error, a negative
+ * value.
+ */
+static int (*bpf_probe_read_str)(void *dst, int size, const void *unsafe_ptr) = (void *) 45;
+
+/*
+ * bpf_get_socket_cookie
+ *
+ * If the **struct sk_buff** pointed by *skb* has a known socket,
+ * retrieve the cookie (generated by the kernel) of this socket.
+ * If no cookie has been set yet, generate a new cookie. Once
+ * generated, the socket cookie remains stable for the life of the
+ * socket. This helper can be useful for monitoring per socket
+ * networking traffic statistics as it provides a global socket
+ * identifier that can be assumed unique.
+ *
+ * Returns
+ * A 8-byte long non-decreasing number on success, or 0 if the
+ * socket field is missing inside *skb*.
+ */
+static __u64 (*bpf_get_socket_cookie)(void *ctx) = (void *) 46;
+
+/*
+ * bpf_get_socket_uid
+ *
+ *
+ * Returns
+ * The owner UID of the socket associated to *skb*. If the socket
+ * is **NULL**, or if it is not a full socket (i.e. if it is a
+ * time-wait or a request socket instead), **overflowuid** value
+ * is returned (note that **overflowuid** might also be the actual
+ * UID value for the socket).
+ */
+static __u32 (*bpf_get_socket_uid)(struct __sk_buff *skb) = (void *) 47;
+
+/*
+ * bpf_set_hash
+ *
+ * Set the full hash for *skb* (set the field *skb*\ **->hash**)
+ * to value *hash*.
+ *
+ * Returns
+ * 0
+ */
+static __u32 (*bpf_set_hash)(struct __sk_buff *skb, __u32 hash) = (void *) 48;
+
+/*
+ * bpf_setsockopt
+ *
+ * Emulate a call to **setsockopt()** on the socket associated to
+ * *bpf_socket*, which must be a full socket. The *level* at
+ * which the option resides and the name *optname* of the option
+ * must be specified, see **setsockopt(2)** for more information.
+ * The option value of length *optlen* is pointed by *optval*.
+ *
+ * This helper actually implements a subset of **setsockopt()**.
+ * It supports the following *level*\ s:
+ *
+ * * **SOL_SOCKET**, which supports the following *optname*\ s:
+ * **SO_RCVBUF**, **SO_SNDBUF**, **SO_MAX_PACING_RATE**,
+ * **SO_PRIORITY**, **SO_RCVLOWAT**, **SO_MARK**.
+ * * **IPPROTO_TCP**, which supports the following *optname*\ s:
+ * **TCP_CONGESTION**, **TCP_BPF_IW**,
+ * **TCP_BPF_SNDCWND_CLAMP**.
+ * * **IPPROTO_IP**, which supports *optname* **IP_TOS**.
+ * * **IPPROTO_IPV6**, which supports *optname* **IPV6_TCLASS**.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_setsockopt)(struct bpf_sock_ops *bpf_socket, int level, int optname, void *optval, int optlen) = (void *) 49;
+
+/*
+ * bpf_skb_adjust_room
+ *
+ * Grow or shrink the room for data in the packet associated to
+ * *skb* by *len_diff*, and according to the selected *mode*.
+ *
+ * There are two supported modes at this time:
+ *
+ * * **BPF_ADJ_ROOM_MAC**: Adjust room at the mac layer
+ * (room space is added or removed below the layer 2 header).
+ *
+ * * **BPF_ADJ_ROOM_NET**: Adjust room at the network layer
+ * (room space is added or removed below the layer 3 header).
+ *
+ * The following flags are supported at this time:
+ *
+ * * **BPF_F_ADJ_ROOM_FIXED_GSO**: Do not adjust gso_size.
+ * Adjusting mss in this way is not allowed for datagrams.
+ *
+ * * **BPF_F_ADJ_ROOM_ENCAP_L3_IPV4**,
+ * **BPF_F_ADJ_ROOM_ENCAP_L3_IPV6**:
+ * Any new space is reserved to hold a tunnel header.
+ * Configure skb offsets and other fields accordingly.
+ *
+ * * **BPF_F_ADJ_ROOM_ENCAP_L4_GRE**,
+ * **BPF_F_ADJ_ROOM_ENCAP_L4_UDP**:
+ * Use with ENCAP_L3 flags to further specify the tunnel type.
+ *
+ * * **BPF_F_ADJ_ROOM_ENCAP_L2**\ (*len*):
+ * Use with ENCAP_L3/L4 flags to further specify the tunnel
+ * type; *len* is the length of the inner MAC header.
+ *
+ * A call to this helper is susceptible to change the underlying
+ * packet buffer. Therefore, at load time, all checks on pointers
+ * previously done by the verifier are invalidated and must be
+ * performed again, if the helper is used in combination with
+ * direct packet access.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_skb_adjust_room)(struct __sk_buff *skb, __s32 len_diff, __u32 mode, __u64 flags) = (void *) 50;
+
+/*
+ * bpf_redirect_map
+ *
+ * Redirect the packet to the endpoint referenced by *map* at
+ * index *key*. Depending on its type, this *map* can contain
+ * references to net devices (for forwarding packets through other
+ * ports), or to CPUs (for redirecting XDP frames to another CPU;
+ * but this is only implemented for native XDP (with driver
+ * support) as of this writing).
+ *
+ * The lower two bits of *flags* are used as the return code if
+ * the map lookup fails. This is so that the return value can be
+ * one of the XDP program return codes up to XDP_TX, as chosen by
+ * the caller. Any higher bits in the *flags* argument must be
+ * unset.
+ *
+ * When used to redirect packets to net devices, this helper
+ * provides a high performance increase over **bpf_redirect**\ ().
+ * This is due to various implementation details of the underlying
+ * mechanisms, one of which is the fact that **bpf_redirect_map**\
+ * () tries to send packet as a "bulk" to the device.
+ *
+ * Returns
+ * **XDP_REDIRECT** on success, or **XDP_ABORTED** on error.
+ */
+static int (*bpf_redirect_map)(void *map, __u32 key, __u64 flags) = (void *) 51;
+
+/*
+ * bpf_sk_redirect_map
+ *
+ * Redirect the packet to the socket referenced by *map* (of type
+ * **BPF_MAP_TYPE_SOCKMAP**) at index *key*. Both ingress and
+ * egress interfaces can be used for redirection. The
+ * **BPF_F_INGRESS** value in *flags* is used to make the
+ * distinction (ingress path is selected if the flag is present,
+ * egress path otherwise). This is the only flag supported for now.
+ *
+ * Returns
+ * **SK_PASS** on success, or **SK_DROP** on error.
+ */
+static int (*bpf_sk_redirect_map)(struct __sk_buff *skb, void *map, __u32 key, __u64 flags) = (void *) 52;
+
+/*
+ * bpf_sock_map_update
+ *
+ * Add an entry to, or update a *map* referencing sockets. The
+ * *skops* is used as a new value for the entry associated to
+ * *key*. *flags* is one of:
+ *
+ * **BPF_NOEXIST**
+ * The entry for *key* must not exist in the map.
+ * **BPF_EXIST**
+ * The entry for *key* must already exist in the map.
+ * **BPF_ANY**
+ * No condition on the existence of the entry for *key*.
+ *
+ * If the *map* has eBPF programs (parser and verdict), those will
+ * be inherited by the socket being added. If the socket is
+ * already attached to eBPF programs, this results in an error.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_sock_map_update)(struct bpf_sock_ops *skops, void *map, void *key, __u64 flags) = (void *) 53;
+
+/*
+ * bpf_xdp_adjust_meta
+ *
+ * Adjust the address pointed by *xdp_md*\ **->data_meta** by
+ * *delta* (which can be positive or negative). Note that this
+ * operation modifies the address stored in *xdp_md*\ **->data**,
+ * so the latter must be loaded only after the helper has been
+ * called.
+ *
+ * The use of *xdp_md*\ **->data_meta** is optional and programs
+ * are not required to use it. The rationale is that when the
+ * packet is processed with XDP (e.g. as DoS filter), it is
+ * possible to push further meta data along with it before passing
+ * to the stack, and to give the guarantee that an ingress eBPF
+ * program attached as a TC classifier on the same device can pick
+ * this up for further post-processing. Since TC works with socket
+ * buffers, it remains possible to set from XDP the **mark** or
+ * **priority** pointers, or other pointers for the socket buffer.
+ * Having this scratch space generic and programmable allows for
+ * more flexibility as the user is free to store whatever meta
+ * data they need.
+ *
+ * A call to this helper is susceptible to change the underlying
+ * packet buffer. Therefore, at load time, all checks on pointers
+ * previously done by the verifier are invalidated and must be
+ * performed again, if the helper is used in combination with
+ * direct packet access.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_xdp_adjust_meta)(struct xdp_md *xdp_md, int delta) = (void *) 54;
+
+/*
+ * bpf_perf_event_read_value
+ *
+ * Read the value of a perf event counter, and store it into *buf*
+ * of size *buf_size*. This helper relies on a *map* of type
+ * **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. The nature of the perf event
+ * counter is selected when *map* is updated with perf event file
+ * descriptors. The *map* is an array whose size is the number of
+ * available CPUs, and each cell contains a value relative to one
+ * CPU. The value to retrieve is indicated by *flags*, that
+ * contains the index of the CPU to look up, masked with
+ * **BPF_F_INDEX_MASK**. Alternatively, *flags* can be set to
+ * **BPF_F_CURRENT_CPU** to indicate that the value for the
+ * current CPU should be retrieved.
+ *
+ * This helper behaves in a way close to
+ * **bpf_perf_event_read**\ () helper, save that instead of
+ * just returning the value observed, it fills the *buf*
+ * structure. This allows for additional data to be retrieved: in
+ * particular, the enabled and running times (in *buf*\
+ * **->enabled** and *buf*\ **->running**, respectively) are
+ * copied. In general, **bpf_perf_event_read_value**\ () is
+ * recommended over **bpf_perf_event_read**\ (), which has some
+ * ABI issues and provides fewer functionalities.
+ *
+ * These values are interesting, because hardware PMU (Performance
+ * Monitoring Unit) counters are limited resources. When there are
+ * more PMU based perf events opened than available counters,
+ * kernel will multiplex these events so each event gets certain
+ * percentage (but not all) of the PMU time. In case that
+ * multiplexing happens, the number of samples or counter value
+ * will not reflect the case compared to when no multiplexing
+ * occurs. This makes comparison between different runs difficult.
+ * Typically, the counter value should be normalized before
+ * comparing to other experiments. The usual normalization is done
+ * as follows.
+ *
+ * ::
+ *
+ * normalized_counter = counter * t_enabled / t_running
+ *
+ * Where t_enabled is the time enabled for event and t_running is
+ * the time running for event since last normalization. The
+ * enabled and running times are accumulated since the perf event
+ * open. To achieve scaling factor between two invocations of an
+ * eBPF program, users can can use CPU id as the key (which is
+ * typical for perf array usage model) to remember the previous
+ * value and do the calculation inside the eBPF program.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_perf_event_read_value)(void *map, __u64 flags, struct bpf_perf_event_value *buf, __u32 buf_size) = (void *) 55;
+
+/*
+ * bpf_perf_prog_read_value
+ *
+ * For en eBPF program attached to a perf event, retrieve the
+ * value of the event counter associated to *ctx* and store it in
+ * the structure pointed by *buf* and of size *buf_size*. Enabled
+ * and running times are also stored in the structure (see
+ * description of helper **bpf_perf_event_read_value**\ () for
+ * more details).
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_perf_prog_read_value)(struct bpf_perf_event_data *ctx, struct bpf_perf_event_value *buf, __u32 buf_size) = (void *) 56;
+
+/*
+ * bpf_getsockopt
+ *
+ * Emulate a call to **getsockopt()** on the socket associated to
+ * *bpf_socket*, which must be a full socket. The *level* at
+ * which the option resides and the name *optname* of the option
+ * must be specified, see **getsockopt(2)** for more information.
+ * The retrieved value is stored in the structure pointed by
+ * *opval* and of length *optlen*.
+ *
+ * This helper actually implements a subset of **getsockopt()**.
+ * It supports the following *level*\ s:
+ *
+ * * **IPPROTO_TCP**, which supports *optname*
+ * **TCP_CONGESTION**.
+ * * **IPPROTO_IP**, which supports *optname* **IP_TOS**.
+ * * **IPPROTO_IPV6**, which supports *optname* **IPV6_TCLASS**.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_getsockopt)(struct bpf_sock_ops *bpf_socket, int level, int optname, void *optval, int optlen) = (void *) 57;
+
+/*
+ * bpf_override_return
+ *
+ * Used for error injection, this helper uses kprobes to override
+ * the return value of the probed function, and to set it to *rc*.
+ * The first argument is the context *regs* on which the kprobe
+ * works.
+ *
+ * This helper works by setting setting the PC (program counter)
+ * to an override function which is run in place of the original
+ * probed function. This means the probed function is not run at
+ * all. The replacement function just returns with the required
+ * value.
+ *
+ * This helper has security implications, and thus is subject to
+ * restrictions. It is only available if the kernel was compiled
+ * with the **CONFIG_BPF_KPROBE_OVERRIDE** configuration
+ * option, and in this case it only works on functions tagged with
+ * **ALLOW_ERROR_INJECTION** in the kernel code.
+ *
+ * Also, the helper is only available for the architectures having
+ * the CONFIG_FUNCTION_ERROR_INJECTION option. As of this writing,
+ * x86 architecture is the only one to support this feature.
+ *
+ * Returns
+ * 0
+ */
+static int (*bpf_override_return)(struct pt_regs *regs, __u64 rc) = (void *) 58;
+
+/*
+ * bpf_sock_ops_cb_flags_set
+ *
+ * Attempt to set the value of the **bpf_sock_ops_cb_flags** field
+ * for the full TCP socket associated to *bpf_sock_ops* to
+ * *argval*.
+ *
+ * The primary use of this field is to determine if there should
+ * be calls to eBPF programs of type
+ * **BPF_PROG_TYPE_SOCK_OPS** at various points in the TCP
+ * code. A program of the same type can change its value, per
+ * connection and as necessary, when the connection is
+ * established. This field is directly accessible for reading, but
+ * this helper must be used for updates in order to return an
+ * error if an eBPF program tries to set a callback that is not
+ * supported in the current kernel.
+ *
+ * *argval* is a flag array which can combine these flags:
+ *
+ * * **BPF_SOCK_OPS_RTO_CB_FLAG** (retransmission time out)
+ * * **BPF_SOCK_OPS_RETRANS_CB_FLAG** (retransmission)
+ * * **BPF_SOCK_OPS_STATE_CB_FLAG** (TCP state change)
+ * * **BPF_SOCK_OPS_RTT_CB_FLAG** (every RTT)
+ *
+ * Therefore, this function can be used to clear a callback flag by
+ * setting the appropriate bit to zero. e.g. to disable the RTO
+ * callback:
+ *
+ * **bpf_sock_ops_cb_flags_set(bpf_sock,**
+ * **bpf_sock->bpf_sock_ops_cb_flags & ~BPF_SOCK_OPS_RTO_CB_FLAG)**
+ *
+ * Here are some examples of where one could call such eBPF
+ * program:
+ *
+ * * When RTO fires.
+ * * When a packet is retransmitted.
+ * * When the connection terminates.
+ * * When a packet is sent.
+ * * When a packet is received.
+ *
+ * Returns
+ * Code **-EINVAL** if the socket is not a full TCP socket;
+ * otherwise, a positive number containing the bits that could not
+ * be set is returned (which comes down to 0 if all bits were set
+ * as required).
+ */
+static int (*bpf_sock_ops_cb_flags_set)(struct bpf_sock_ops *bpf_sock, int argval) = (void *) 59;
+
+/*
+ * bpf_msg_redirect_map
+ *
+ * This helper is used in programs implementing policies at the
+ * socket level. If the message *msg* is allowed to pass (i.e. if
+ * the verdict eBPF program returns **SK_PASS**), redirect it to
+ * the socket referenced by *map* (of type
+ * **BPF_MAP_TYPE_SOCKMAP**) at index *key*. Both ingress and
+ * egress interfaces can be used for redirection. The
+ * **BPF_F_INGRESS** value in *flags* is used to make the
+ * distinction (ingress path is selected if the flag is present,
+ * egress path otherwise). This is the only flag supported for now.
+ *
+ * Returns
+ * **SK_PASS** on success, or **SK_DROP** on error.
+ */
+static int (*bpf_msg_redirect_map)(struct sk_msg_md *msg, void *map, __u32 key, __u64 flags) = (void *) 60;
+
+/*
+ * bpf_msg_apply_bytes
+ *
+ * For socket policies, apply the verdict of the eBPF program to
+ * the next *bytes* (number of bytes) of message *msg*.
+ *
+ * For example, this helper can be used in the following cases:
+ *
+ * * A single **sendmsg**\ () or **sendfile**\ () system call
+ * contains multiple logical messages that the eBPF program is
+ * supposed to read and for which it should apply a verdict.
+ * * An eBPF program only cares to read the first *bytes* of a
+ * *msg*. If the message has a large payload, then setting up
+ * and calling the eBPF program repeatedly for all bytes, even
+ * though the verdict is already known, would create unnecessary
+ * overhead.
+ *
+ * When called from within an eBPF program, the helper sets a
+ * counter internal to the BPF infrastructure, that is used to
+ * apply the last verdict to the next *bytes*. If *bytes* is
+ * smaller than the current data being processed from a
+ * **sendmsg**\ () or **sendfile**\ () system call, the first
+ * *bytes* will be sent and the eBPF program will be re-run with
+ * the pointer for start of data pointing to byte number *bytes*
+ * **+ 1**. If *bytes* is larger than the current data being
+ * processed, then the eBPF verdict will be applied to multiple
+ * **sendmsg**\ () or **sendfile**\ () calls until *bytes* are
+ * consumed.
+ *
+ * Note that if a socket closes with the internal counter holding
+ * a non-zero value, this is not a problem because data is not
+ * being buffered for *bytes* and is sent as it is received.
+ *
+ * Returns
+ * 0
+ */
+static int (*bpf_msg_apply_bytes)(struct sk_msg_md *msg, __u32 bytes) = (void *) 61;
+
+/*
+ * bpf_msg_cork_bytes
+ *
+ * For socket policies, prevent the execution of the verdict eBPF
+ * program for message *msg* until *bytes* (byte number) have been
+ * accumulated.
+ *
+ * This can be used when one needs a specific number of bytes
+ * before a verdict can be assigned, even if the data spans
+ * multiple **sendmsg**\ () or **sendfile**\ () calls. The extreme
+ * case would be a user calling **sendmsg**\ () repeatedly with
+ * 1-byte long message segments. Obviously, this is bad for
+ * performance, but it is still valid. If the eBPF program needs
+ * *bytes* bytes to validate a header, this helper can be used to
+ * prevent the eBPF program to be called again until *bytes* have
+ * been accumulated.
+ *
+ * Returns
+ * 0
+ */
+static int (*bpf_msg_cork_bytes)(struct sk_msg_md *msg, __u32 bytes) = (void *) 62;
+
+/*
+ * bpf_msg_pull_data
+ *
+ * For socket policies, pull in non-linear data from user space
+ * for *msg* and set pointers *msg*\ **->data** and *msg*\
+ * **->data_end** to *start* and *end* bytes offsets into *msg*,
+ * respectively.
+ *
+ * If a program of type **BPF_PROG_TYPE_SK_MSG** is run on a
+ * *msg* it can only parse data that the (**data**, **data_end**)
+ * pointers have already consumed. For **sendmsg**\ () hooks this
+ * is likely the first scatterlist element. But for calls relying
+ * on the **sendpage** handler (e.g. **sendfile**\ ()) this will
+ * be the range (**0**, **0**) because the data is shared with
+ * user space and by default the objective is to avoid allowing
+ * user space to modify data while (or after) eBPF verdict is
+ * being decided. This helper can be used to pull in data and to
+ * set the start and end pointer to given values. Data will be
+ * copied if necessary (i.e. if data was not linear and if start
+ * and end pointers do not point to the same chunk).
+ *
+ * A call to this helper is susceptible to change the underlying
+ * packet buffer. Therefore, at load time, all checks on pointers
+ * previously done by the verifier are invalidated and must be
+ * performed again, if the helper is used in combination with
+ * direct packet access.
+ *
+ * All values for *flags* are reserved for future usage, and must
+ * be left at zero.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_msg_pull_data)(struct sk_msg_md *msg, __u32 start, __u32 end, __u64 flags) = (void *) 63;
+
+/*
+ * bpf_bind
+ *
+ * Bind the socket associated to *ctx* to the address pointed by
+ * *addr*, of length *addr_len*. This allows for making outgoing
+ * connection from the desired IP address, which can be useful for
+ * example when all processes inside a cgroup should use one
+ * single IP address on a host that has multiple IP configured.
+ *
+ * This helper works for IPv4 and IPv6, TCP and UDP sockets. The
+ * domain (*addr*\ **->sa_family**) must be **AF_INET** (or
+ * **AF_INET6**). Looking for a free port to bind to can be
+ * expensive, therefore binding to port is not permitted by the
+ * helper: *addr*\ **->sin_port** (or **sin6_port**, respectively)
+ * must be set to zero.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_bind)(struct bpf_sock_addr *ctx, struct sockaddr *addr, int addr_len) = (void *) 64;
+
+/*
+ * bpf_xdp_adjust_tail
+ *
+ * Adjust (move) *xdp_md*\ **->data_end** by *delta* bytes. It is
+ * only possible to shrink the packet as of this writing,
+ * therefore *delta* must be a negative integer.
+ *
+ * A call to this helper is susceptible to change the underlying
+ * packet buffer. Therefore, at load time, all checks on pointers
+ * previously done by the verifier are invalidated and must be
+ * performed again, if the helper is used in combination with
+ * direct packet access.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_xdp_adjust_tail)(struct xdp_md *xdp_md, int delta) = (void *) 65;
+
+/*
+ * bpf_skb_get_xfrm_state
+ *
+ * Retrieve the XFRM state (IP transform framework, see also
+ * **ip-xfrm(8)**) at *index* in XFRM "security path" for *skb*.
+ *
+ * The retrieved value is stored in the **struct bpf_xfrm_state**
+ * pointed by *xfrm_state* and of length *size*.
+ *
+ * All values for *flags* are reserved for future usage, and must
+ * be left at zero.
+ *
+ * This helper is available only if the kernel was compiled with
+ * **CONFIG_XFRM** configuration option.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_skb_get_xfrm_state)(struct __sk_buff *skb, __u32 index, struct bpf_xfrm_state *xfrm_state, __u32 size, __u64 flags) = (void *) 66;
+
+/*
+ * bpf_get_stack
+ *
+ * Return a user or a kernel stack in bpf program provided buffer.
+ * To achieve this, the helper needs *ctx*, which is a pointer
+ * to the context on which the tracing program is executed.
+ * To store the stacktrace, the bpf program provides *buf* with
+ * a nonnegative *size*.
+ *
+ * The last argument, *flags*, holds the number of stack frames to
+ * skip (from 0 to 255), masked with
+ * **BPF_F_SKIP_FIELD_MASK**. The next bits can be used to set
+ * the following flags:
+ *
+ * **BPF_F_USER_STACK**
+ * Collect a user space stack instead of a kernel stack.
+ * **BPF_F_USER_BUILD_ID**
+ * Collect buildid+offset instead of ips for user stack,
+ * only valid if **BPF_F_USER_STACK** is also specified.
+ *
+ * **bpf_get_stack**\ () can collect up to
+ * **PERF_MAX_STACK_DEPTH** both kernel and user frames, subject
+ * to sufficient large buffer size. Note that
+ * this limit can be controlled with the **sysctl** program, and
+ * that it should be manually increased in order to profile long
+ * user stacks (such as stacks for Java programs). To do so, use:
+ *
+ * ::
+ *
+ * # sysctl kernel.perf_event_max_stack=<new value>
+ *
+ * Returns
+ * A non-negative value equal to or less than *size* on success,
+ * or a negative error in case of failure.
+ */
+static int (*bpf_get_stack)(void *ctx, void *buf, __u32 size, __u64 flags) = (void *) 67;
+
+/*
+ * bpf_skb_load_bytes_relative
+ *
+ * This helper is similar to **bpf_skb_load_bytes**\ () in that
+ * it provides an easy way to load *len* bytes from *offset*
+ * from the packet associated to *skb*, into the buffer pointed
+ * by *to*. The difference to **bpf_skb_load_bytes**\ () is that
+ * a fifth argument *start_header* exists in order to select a
+ * base offset to start from. *start_header* can be one of:
+ *
+ * **BPF_HDR_START_MAC**
+ * Base offset to load data from is *skb*'s mac header.
+ * **BPF_HDR_START_NET**
+ * Base offset to load data from is *skb*'s network header.
+ *
+ * In general, "direct packet access" is the preferred method to
+ * access packet data, however, this helper is in particular useful
+ * in socket filters where *skb*\ **->data** does not always point
+ * to the start of the mac header and where "direct packet access"
+ * is not available.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_skb_load_bytes_relative)(const void *skb, __u32 offset, void *to, __u32 len, __u32 start_header) = (void *) 68;
+
+/*
+ * bpf_fib_lookup
+ *
+ * Do FIB lookup in kernel tables using parameters in *params*.
+ * If lookup is successful and result shows packet is to be
+ * forwarded, the neighbor tables are searched for the nexthop.
+ * If successful (ie., FIB lookup shows forwarding and nexthop
+ * is resolved), the nexthop address is returned in ipv4_dst
+ * or ipv6_dst based on family, smac is set to mac address of
+ * egress device, dmac is set to nexthop mac address, rt_metric
+ * is set to metric from route (IPv4/IPv6 only), and ifindex
+ * is set to the device index of the nexthop from the FIB lookup.
+ *
+ * *plen* argument is the size of the passed in struct.
+ * *flags* argument can be a combination of one or more of the
+ * following values:
+ *
+ * **BPF_FIB_LOOKUP_DIRECT**
+ * Do a direct table lookup vs full lookup using FIB
+ * rules.
+ * **BPF_FIB_LOOKUP_OUTPUT**
+ * Perform lookup from an egress perspective (default is
+ * ingress).
+ *
+ * *ctx* is either **struct xdp_md** for XDP programs or
+ * **struct sk_buff** tc cls_act programs.
+ *
+ * Returns
+ * * < 0 if any input argument is invalid
+ * * 0 on success (packet is forwarded, nexthop neighbor exists)
+ * * > 0 one of **BPF_FIB_LKUP_RET_** codes explaining why the
+ * packet is not forwarded or needs assist from full stack
+ */
+static int (*bpf_fib_lookup)(void *ctx, struct bpf_fib_lookup *params, int plen, __u32 flags) = (void *) 69;
+
+/*
+ * bpf_sock_hash_update
+ *
+ * Add an entry to, or update a sockhash *map* referencing sockets.
+ * The *skops* is used as a new value for the entry associated to
+ * *key*. *flags* is one of:
+ *
+ * **BPF_NOEXIST**
+ * The entry for *key* must not exist in the map.
+ * **BPF_EXIST**
+ * The entry for *key* must already exist in the map.
+ * **BPF_ANY**
+ * No condition on the existence of the entry for *key*.
+ *
+ * If the *map* has eBPF programs (parser and verdict), those will
+ * be inherited by the socket being added. If the socket is
+ * already attached to eBPF programs, this results in an error.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_sock_hash_update)(struct bpf_sock_ops *skops, void *map, void *key, __u64 flags) = (void *) 70;
+
+/*
+ * bpf_msg_redirect_hash
+ *
+ * This helper is used in programs implementing policies at the
+ * socket level. If the message *msg* is allowed to pass (i.e. if
+ * the verdict eBPF program returns **SK_PASS**), redirect it to
+ * the socket referenced by *map* (of type
+ * **BPF_MAP_TYPE_SOCKHASH**) using hash *key*. Both ingress and
+ * egress interfaces can be used for redirection. The
+ * **BPF_F_INGRESS** value in *flags* is used to make the
+ * distinction (ingress path is selected if the flag is present,
+ * egress path otherwise). This is the only flag supported for now.
+ *
+ * Returns
+ * **SK_PASS** on success, or **SK_DROP** on error.
+ */
+static int (*bpf_msg_redirect_hash)(struct sk_msg_md *msg, void *map, void *key, __u64 flags) = (void *) 71;
+
+/*
+ * bpf_sk_redirect_hash
+ *
+ * This helper is used in programs implementing policies at the
+ * skb socket level. If the sk_buff *skb* is allowed to pass (i.e.
+ * if the verdeict eBPF program returns **SK_PASS**), redirect it
+ * to the socket referenced by *map* (of type
+ * **BPF_MAP_TYPE_SOCKHASH**) using hash *key*. Both ingress and
+ * egress interfaces can be used for redirection. The
+ * **BPF_F_INGRESS** value in *flags* is used to make the
+ * distinction (ingress path is selected if the flag is present,
+ * egress otherwise). This is the only flag supported for now.
+ *
+ * Returns
+ * **SK_PASS** on success, or **SK_DROP** on error.
+ */
+static int (*bpf_sk_redirect_hash)(struct __sk_buff *skb, void *map, void *key, __u64 flags) = (void *) 72;
+
+/*
+ * bpf_lwt_push_encap
+ *
+ * Encapsulate the packet associated to *skb* within a Layer 3
+ * protocol header. This header is provided in the buffer at
+ * address *hdr*, with *len* its size in bytes. *type* indicates
+ * the protocol of the header and can be one of:
+ *
+ * **BPF_LWT_ENCAP_SEG6**
+ * IPv6 encapsulation with Segment Routing Header
+ * (**struct ipv6_sr_hdr**). *hdr* only contains the SRH,
+ * the IPv6 header is computed by the kernel.
+ * **BPF_LWT_ENCAP_SEG6_INLINE**
+ * Only works if *skb* contains an IPv6 packet. Insert a
+ * Segment Routing Header (**struct ipv6_sr_hdr**) inside
+ * the IPv6 header.
+ * **BPF_LWT_ENCAP_IP**
+ * IP encapsulation (GRE/GUE/IPIP/etc). The outer header
+ * must be IPv4 or IPv6, followed by zero or more
+ * additional headers, up to **LWT_BPF_MAX_HEADROOM**
+ * total bytes in all prepended headers. Please note that
+ * if **skb_is_gso**\ (*skb*) is true, no more than two
+ * headers can be prepended, and the inner header, if
+ * present, should be either GRE or UDP/GUE.
+ *
+ * **BPF_LWT_ENCAP_SEG6**\ \* types can be called by BPF programs
+ * of type **BPF_PROG_TYPE_LWT_IN**; **BPF_LWT_ENCAP_IP** type can
+ * be called by bpf programs of types **BPF_PROG_TYPE_LWT_IN** and
+ * **BPF_PROG_TYPE_LWT_XMIT**.
+ *
+ * A call to this helper is susceptible to change the underlying
+ * packet buffer. Therefore, at load time, all checks on pointers
+ * previously done by the verifier are invalidated and must be
+ * performed again, if the helper is used in combination with
+ * direct packet access.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_lwt_push_encap)(struct __sk_buff *skb, __u32 type, void *hdr, __u32 len) = (void *) 73;
+
+/*
+ * bpf_lwt_seg6_store_bytes
+ *
+ * Store *len* bytes from address *from* into the packet
+ * associated to *skb*, at *offset*. Only the flags, tag and TLVs
+ * inside the outermost IPv6 Segment Routing Header can be
+ * modified through this helper.
+ *
+ * A call to this helper is susceptible to change the underlying
+ * packet buffer. Therefore, at load time, all checks on pointers
+ * previously done by the verifier are invalidated and must be
+ * performed again, if the helper is used in combination with
+ * direct packet access.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_lwt_seg6_store_bytes)(struct __sk_buff *skb, __u32 offset, const void *from, __u32 len) = (void *) 74;
+
+/*
+ * bpf_lwt_seg6_adjust_srh
+ *
+ * Adjust the size allocated to TLVs in the outermost IPv6
+ * Segment Routing Header contained in the packet associated to
+ * *skb*, at position *offset* by *delta* bytes. Only offsets
+ * after the segments are accepted. *delta* can be as well
+ * positive (growing) as negative (shrinking).
+ *
+ * A call to this helper is susceptible to change the underlying
+ * packet buffer. Therefore, at load time, all checks on pointers
+ * previously done by the verifier are invalidated and must be
+ * performed again, if the helper is used in combination with
+ * direct packet access.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_lwt_seg6_adjust_srh)(struct __sk_buff *skb, __u32 offset, __s32 delta) = (void *) 75;
+
+/*
+ * bpf_lwt_seg6_action
+ *
+ * Apply an IPv6 Segment Routing action of type *action* to the
+ * packet associated to *skb*. Each action takes a parameter
+ * contained at address *param*, and of length *param_len* bytes.
+ * *action* can be one of:
+ *
+ * **SEG6_LOCAL_ACTION_END_X**
+ * End.X action: Endpoint with Layer-3 cross-connect.
+ * Type of *param*: **struct in6_addr**.
+ * **SEG6_LOCAL_ACTION_END_T**
+ * End.T action: Endpoint with specific IPv6 table lookup.
+ * Type of *param*: **int**.
+ * **SEG6_LOCAL_ACTION_END_B6**
+ * End.B6 action: Endpoint bound to an SRv6 policy.
+ * Type of *param*: **struct ipv6_sr_hdr**.
+ * **SEG6_LOCAL_ACTION_END_B6_ENCAP**
+ * End.B6.Encap action: Endpoint bound to an SRv6
+ * encapsulation policy.
+ * Type of *param*: **struct ipv6_sr_hdr**.
+ *
+ * A call to this helper is susceptible to change the underlying
+ * packet buffer. Therefore, at load time, all checks on pointers
+ * previously done by the verifier are invalidated and must be
+ * performed again, if the helper is used in combination with
+ * direct packet access.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_lwt_seg6_action)(struct __sk_buff *skb, __u32 action, void *param, __u32 param_len) = (void *) 76;
+
+/*
+ * bpf_rc_repeat
+ *
+ * This helper is used in programs implementing IR decoding, to
+ * report a successfully decoded repeat key message. This delays
+ * the generation of a key up event for previously generated
+ * key down event.
+ *
+ * Some IR protocols like NEC have a special IR message for
+ * repeating last button, for when a button is held down.
+ *
+ * The *ctx* should point to the lirc sample as passed into
+ * the program.
+ *
+ * This helper is only available is the kernel was compiled with
+ * the **CONFIG_BPF_LIRC_MODE2** configuration option set to
+ * "**y**".
+ *
+ * Returns
+ * 0
+ */
+static int (*bpf_rc_repeat)(void *ctx) = (void *) 77;
+
+/*
+ * bpf_rc_keydown
+ *
+ * This helper is used in programs implementing IR decoding, to
+ * report a successfully decoded key press with *scancode*,
+ * *toggle* value in the given *protocol*. The scancode will be
+ * translated to a keycode using the rc keymap, and reported as
+ * an input key down event. After a period a key up event is
+ * generated. This period can be extended by calling either
+ * **bpf_rc_keydown**\ () again with the same values, or calling
+ * **bpf_rc_repeat**\ ().
+ *
+ * Some protocols include a toggle bit, in case the button was
+ * released and pressed again between consecutive scancodes.
+ *
+ * The *ctx* should point to the lirc sample as passed into
+ * the program.
+ *
+ * The *protocol* is the decoded protocol number (see
+ * **enum rc_proto** for some predefined values).
+ *
+ * This helper is only available is the kernel was compiled with
+ * the **CONFIG_BPF_LIRC_MODE2** configuration option set to
+ * "**y**".
+ *
+ * Returns
+ * 0
+ */
+static int (*bpf_rc_keydown)(void *ctx, __u32 protocol, __u64 scancode, __u32 toggle) = (void *) 78;
+
+/*
+ * bpf_skb_cgroup_id
+ *
+ * Return the cgroup v2 id of the socket associated with the *skb*.
+ * This is roughly similar to the **bpf_get_cgroup_classid**\ ()
+ * helper for cgroup v1 by providing a tag resp. identifier that
+ * can be matched on or used for map lookups e.g. to implement
+ * policy. The cgroup v2 id of a given path in the hierarchy is
+ * exposed in user space through the f_handle API in order to get
+ * to the same 64-bit id.
+ *
+ * This helper can be used on TC egress path, but not on ingress,
+ * and is available only if the kernel was compiled with the
+ * **CONFIG_SOCK_CGROUP_DATA** configuration option.
+ *
+ * Returns
+ * The id is returned or 0 in case the id could not be retrieved.
+ */
+static __u64 (*bpf_skb_cgroup_id)(struct __sk_buff *skb) = (void *) 79;
+
+/*
+ * bpf_get_current_cgroup_id
+ *
+ *
+ * Returns
+ * A 64-bit integer containing the current cgroup id based
+ * on the cgroup within which the current task is running.
+ */
+static __u64 (*bpf_get_current_cgroup_id)(void) = (void *) 80;
+
+/*
+ * bpf_get_local_storage
+ *
+ * Get the pointer to the local storage area.
+ * The type and the size of the local storage is defined
+ * by the *map* argument.
+ * The *flags* meaning is specific for each map type,
+ * and has to be 0 for cgroup local storage.
+ *
+ * Depending on the BPF program type, a local storage area
+ * can be shared between multiple instances of the BPF program,
+ * running simultaneously.
+ *
+ * A user should care about the synchronization by himself.
+ * For example, by using the **BPF_STX_XADD** instruction to alter
+ * the shared data.
+ *
+ * Returns
+ * A pointer to the local storage area.
+ */
+static void *(*bpf_get_local_storage)(void *map, __u64 flags) = (void *) 81;
+
+/*
+ * bpf_sk_select_reuseport
+ *
+ * Select a **SO_REUSEPORT** socket from a
+ * **BPF_MAP_TYPE_REUSEPORT_ARRAY** *map*.
+ * It checks the selected socket is matching the incoming
+ * request in the socket buffer.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_sk_select_reuseport)(struct sk_reuseport_md *reuse, void *map, void *key, __u64 flags) = (void *) 82;
+
+/*
+ * bpf_skb_ancestor_cgroup_id
+ *
+ * Return id of cgroup v2 that is ancestor of cgroup associated
+ * with the *skb* at the *ancestor_level*. The root cgroup is at
+ * *ancestor_level* zero and each step down the hierarchy
+ * increments the level. If *ancestor_level* == level of cgroup
+ * associated with *skb*, then return value will be same as that
+ * of **bpf_skb_cgroup_id**\ ().
+ *
+ * The helper is useful to implement policies based on cgroups
+ * that are upper in hierarchy than immediate cgroup associated
+ * with *skb*.
+ *
+ * The format of returned id and helper limitations are same as in
+ * **bpf_skb_cgroup_id**\ ().
+ *
+ * Returns
+ * The id is returned or 0 in case the id could not be retrieved.
+ */
+static __u64 (*bpf_skb_ancestor_cgroup_id)(struct __sk_buff *skb, int ancestor_level) = (void *) 83;
+
+/*
+ * bpf_sk_lookup_tcp
+ *
+ * Look for TCP socket matching *tuple*, optionally in a child
+ * network namespace *netns*. The return value must be checked,
+ * and if non-**NULL**, released via **bpf_sk_release**\ ().
+ *
+ * The *ctx* should point to the context of the program, such as
+ * the skb or socket (depending on the hook in use). This is used
+ * to determine the base network namespace for the lookup.
+ *
+ * *tuple_size* must be one of:
+ *
+ * **sizeof**\ (*tuple*\ **->ipv4**)
+ * Look for an IPv4 socket.
+ * **sizeof**\ (*tuple*\ **->ipv6**)
+ * Look for an IPv6 socket.
+ *
+ * If the *netns* is a negative signed 32-bit integer, then the
+ * socket lookup table in the netns associated with the *ctx* will
+ * will be used. For the TC hooks, this is the netns of the device
+ * in the skb. For socket hooks, this is the netns of the socket.
+ * If *netns* is any other signed 32-bit value greater than or
+ * equal to zero then it specifies the ID of the netns relative to
+ * the netns associated with the *ctx*. *netns* values beyond the
+ * range of 32-bit integers are reserved for future use.
+ *
+ * All values for *flags* are reserved for future usage, and must
+ * be left at zero.
+ *
+ * This helper is available only if the kernel was compiled with
+ * **CONFIG_NET** configuration option.
+ *
+ * Returns
+ * Pointer to **struct bpf_sock**, or **NULL** in case of failure.
+ * For sockets with reuseport option, the **struct bpf_sock**
+ * result is from *reuse*\ **->socks**\ [] using the hash of the
+ * tuple.
+ */
+static struct bpf_sock *(*bpf_sk_lookup_tcp)(void *ctx, struct bpf_sock_tuple *tuple, __u32 tuple_size, __u64 netns, __u64 flags) = (void *) 84;
+
+/*
+ * bpf_sk_lookup_udp
+ *
+ * Look for UDP socket matching *tuple*, optionally in a child
+ * network namespace *netns*. The return value must be checked,
+ * and if non-**NULL**, released via **bpf_sk_release**\ ().
+ *
+ * The *ctx* should point to the context of the program, such as
+ * the skb or socket (depending on the hook in use). This is used
+ * to determine the base network namespace for the lookup.
+ *
+ * *tuple_size* must be one of:
+ *
+ * **sizeof**\ (*tuple*\ **->ipv4**)
+ * Look for an IPv4 socket.
+ * **sizeof**\ (*tuple*\ **->ipv6**)
+ * Look for an IPv6 socket.
+ *
+ * If the *netns* is a negative signed 32-bit integer, then the
+ * socket lookup table in the netns associated with the *ctx* will
+ * will be used. For the TC hooks, this is the netns of the device
+ * in the skb. For socket hooks, this is the netns of the socket.
+ * If *netns* is any other signed 32-bit value greater than or
+ * equal to zero then it specifies the ID of the netns relative to
+ * the netns associated with the *ctx*. *netns* values beyond the
+ * range of 32-bit integers are reserved for future use.
+ *
+ * All values for *flags* are reserved for future usage, and must
+ * be left at zero.
+ *
+ * This helper is available only if the kernel was compiled with
+ * **CONFIG_NET** configuration option.
+ *
+ * Returns
+ * Pointer to **struct bpf_sock**, or **NULL** in case of failure.
+ * For sockets with reuseport option, the **struct bpf_sock**
+ * result is from *reuse*\ **->socks**\ [] using the hash of the
+ * tuple.
+ */
+static struct bpf_sock *(*bpf_sk_lookup_udp)(void *ctx, struct bpf_sock_tuple *tuple, __u32 tuple_size, __u64 netns, __u64 flags) = (void *) 85;
+
+/*
+ * bpf_sk_release
+ *
+ * Release the reference held by *sock*. *sock* must be a
+ * non-**NULL** pointer that was returned from
+ * **bpf_sk_lookup_xxx**\ ().
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_sk_release)(struct bpf_sock *sock) = (void *) 86;
+
+/*
+ * bpf_map_push_elem
+ *
+ * Push an element *value* in *map*. *flags* is one of:
+ *
+ * **BPF_EXIST**
+ * If the queue/stack is full, the oldest element is
+ * removed to make room for this.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_map_push_elem)(void *map, const void *value, __u64 flags) = (void *) 87;
+
+/*
+ * bpf_map_pop_elem
+ *
+ * Pop an element from *map*.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_map_pop_elem)(void *map, void *value) = (void *) 88;
+
+/*
+ * bpf_map_peek_elem
+ *
+ * Get an element from *map* without removing it.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_map_peek_elem)(void *map, void *value) = (void *) 89;
+
+/*
+ * bpf_msg_push_data
+ *
+ * For socket policies, insert *len* bytes into *msg* at offset
+ * *start*.
+ *
+ * If a program of type **BPF_PROG_TYPE_SK_MSG** is run on a
+ * *msg* it may want to insert metadata or options into the *msg*.
+ * This can later be read and used by any of the lower layer BPF
+ * hooks.
+ *
+ * This helper may fail if under memory pressure (a malloc
+ * fails) in these cases BPF programs will get an appropriate
+ * error and BPF programs will need to handle them.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_msg_push_data)(struct sk_msg_md *msg, __u32 start, __u32 len, __u64 flags) = (void *) 90;
+
+/*
+ * bpf_msg_pop_data
+ *
+ * Will remove *len* bytes from a *msg* starting at byte *start*.
+ * This may result in **ENOMEM** errors under certain situations if
+ * an allocation and copy are required due to a full ring buffer.
+ * However, the helper will try to avoid doing the allocation
+ * if possible. Other errors can occur if input parameters are
+ * invalid either due to *start* byte not being valid part of *msg*
+ * payload and/or *pop* value being to large.
+ *
+ * Returns
+ * 0 on success, or a negative error in case of failure.
+ */
+static int (*bpf_msg_pop_data)(struct sk_msg_md *msg, __u32 start, __u32 len, __u64 flags) = (void *) 91;
+
+/*
+ * bpf_rc_pointer_rel
+ *
+ * This helper is used in programs implementing IR decoding, to
+ * report a successfully decoded pointer movement.
+ *
+ * The *ctx* should point to the lirc sample as passed into
+ * the program.
+ *
+ * This helper is only available is the kernel was compiled with
+ * the **CONFIG_BPF_LIRC_MODE2** configuration option set to
+ * "**y**".
+ *
+ * Returns
+ * 0
+ */
+static int (*bpf_rc_pointer_rel)(void *ctx, __s32 rel_x, __s32 rel_y) = (void *) 92;
+
+/*
+ * bpf_spin_lock
+ *
+ * Acquire a spinlock represented by the pointer *lock*, which is
+ * stored as part of a value of a map. Taking the lock allows to
+ * safely update the rest of the fields in that value. The
+ * spinlock can (and must) later be released with a call to
+ * **bpf_spin_unlock**\ (\ *lock*\ ).
+ *
+ * Spinlocks in BPF programs come with a number of restrictions
+ * and constraints:
+ *
+ * * **bpf_spin_lock** objects are only allowed inside maps of
+ * types **BPF_MAP_TYPE_HASH** and **BPF_MAP_TYPE_ARRAY** (this
+ * list could be extended in the future).
+ * * BTF description of the map is mandatory.
+ * * The BPF program can take ONE lock at a time, since taking two
+ * or more could cause dead locks.
+ * * Only one **struct bpf_spin_lock** is allowed per map element.
+ * * When the lock is taken, calls (either BPF to BPF or helpers)
+ * are not allowed.
+ * * The **BPF_LD_ABS** and **BPF_LD_IND** instructions are not
+ * allowed inside a spinlock-ed region.
+ * * The BPF program MUST call **bpf_spin_unlock**\ () to release
+ * the lock, on all execution paths, before it returns.
+ * * The BPF program can access **struct bpf_spin_lock** only via
+ * the **bpf_spin_lock**\ () and **bpf_spin_unlock**\ ()
+ * helpers. Loading or storing data into the **struct
+ * bpf_spin_lock** *lock*\ **;** field of a map is not allowed.
+ * * To use the **bpf_spin_lock**\ () helper, the BTF description
+ * of the map value must be a struct and have **struct
+ * bpf_spin_lock** *anyname*\ **;** field at the top level.
+ * Nested lock inside another struct is not allowed.
+ * * The **struct bpf_spin_lock** *lock* field in a map value must
+ * be aligned on a multiple of 4 bytes in that value.
+ * * Syscall with command **BPF_MAP_LOOKUP_ELEM** does not copy
+ * the **bpf_spin_lock** field to user space.
+ * * Syscall with command **BPF_MAP_UPDATE_ELEM**, or update from
+ * a BPF program, do not update the **bpf_spin_lock** field.
+ * * **bpf_spin_lock** cannot be on the stack or inside a
+ * networking packet (it can only be inside of a map values).
+ * * **bpf_spin_lock** is available to root only.
+ * * Tracing programs and socket filter programs cannot use
+ * **bpf_spin_lock**\ () due to insufficient preemption checks
+ * (but this may change in the future).
+ * * **bpf_spin_lock** is not allowed in inner maps of map-in-map.
+ *
+ * Returns
+ * 0
+ */
+static int (*bpf_spin_lock)(struct bpf_spin_lock *lock) = (void *) 93;
+
+/*
+ * bpf_spin_unlock
+ *
+ * Release the *lock* previously locked by a call to
+ * **bpf_spin_lock**\ (\ *lock*\ ).
+ *
+ * Returns
+ * 0
+ */
+static int (*bpf_spin_unlock)(struct bpf_spin_lock *lock) = (void *) 94;
+
+/*
+ * bpf_sk_fullsock
+ *
+ * This helper gets a **struct bpf_sock** pointer such
+ * that all the fields in this **bpf_sock** can be accessed.
+ *
+ * Returns
+ * A **struct bpf_sock** pointer on success, or **NULL** in
+ * case of failure.
+ */
+static struct bpf_sock *(*bpf_sk_fullsock)(struct bpf_sock *sk) = (void *) 95;
+
+/*
+ * bpf_tcp_sock
+ *
+ * This helper gets a **struct bpf_tcp_sock** pointer from a
+ * **struct bpf_sock** pointer.
+ *
+ * Returns
+ * A **struct bpf_tcp_sock** pointer on success, or **NULL** in
+ * case of failure.
+ */
+static struct bpf_tcp_sock *(*bpf_tcp_sock)(struct bpf_sock *sk) = (void *) 96;
+
+/*
+ * bpf_skb_ecn_set_ce
+ *
+ * Set ECN (Explicit Congestion Notification) field of IP header
+ * to **CE** (Congestion Encountered) if current value is **ECT**
+ * (ECN Capable Transport). Otherwise, do nothing. Works with IPv6
+ * and IPv4.
+ *
+ * Returns
+ * 1 if the **CE** flag is set (either by the current helper call
+ * or because it was already present), 0 if it is not set.
+ */
+static int (*bpf_skb_ecn_set_ce)(struct __sk_buff *skb) = (void *) 97;
+
+/*
+ * bpf_get_listener_sock
+ *
+ * Return a **struct bpf_sock** pointer in **TCP_LISTEN** state.
+ * **bpf_sk_release**\ () is unnecessary and not allowed.
+ *
+ * Returns
+ * A **struct bpf_sock** pointer on success, or **NULL** in
+ * case of failure.
+ */
+static struct bpf_sock *(*bpf_get_listener_sock)(struct bpf_sock *sk) = (void *) 98;
+
+/*
+ * bpf_skc_lookup_tcp
+ *
+ * Look for TCP socket matching *tuple*, optionally in a child
+ * network namespace *netns*. The return value must be checked,
+ * and if non-**NULL**, released via **bpf_sk_release**\ ().
+ *
+ * This function is identical to **bpf_sk_lookup_tcp**\ (), except
+ * that it also returns timewait or request sockets. Use
+ * **bpf_sk_fullsock**\ () or **bpf_tcp_sock**\ () to access the
+ * full structure.
+ *
+ * This helper is available only if the kernel was compiled with
+ * **CONFIG_NET** configuration option.
+ *
+ * Returns
+ * Pointer to **struct bpf_sock**, or **NULL** in case of failure.
+ * For sockets with reuseport option, the **struct bpf_sock**
+ * result is from *reuse*\ **->socks**\ [] using the hash of the
+ * tuple.
+ */
+static struct bpf_sock *(*bpf_skc_lookup_tcp)(void *ctx, struct bpf_sock_tuple *tuple, __u32 tuple_size, __u64 netns, __u64 flags) = (void *) 99;
+
+/*
+ * bpf_tcp_check_syncookie
+ *
+ * Check whether *iph* and *th* contain a valid SYN cookie ACK for
+ * the listening socket in *sk*.
+ *
+ * *iph* points to the start of the IPv4 or IPv6 header, while
+ * *iph_len* contains **sizeof**\ (**struct iphdr**) or
+ * **sizeof**\ (**struct ip6hdr**).
+ *
+ * *th* points to the start of the TCP header, while *th_len*
+ * contains **sizeof**\ (**struct tcphdr**).
+ *
+ *
+ * Returns
+ * 0 if *iph* and *th* are a valid SYN cookie ACK, or a negative
+ * error otherwise.
+ */
+static int (*bpf_tcp_check_syncookie)(struct bpf_sock *sk, void *iph, __u32 iph_len, struct tcphdr *th, __u32 th_len) = (void *) 100;
+
+/*
+ * bpf_sysctl_get_name
+ *
+ * Get name of sysctl in /proc/sys/ and copy it into provided by
+ * program buffer *buf* of size *buf_len*.
+ *
+ * The buffer is always NUL terminated, unless it's zero-sized.
+ *
+ * If *flags* is zero, full name (e.g. "net/ipv4/tcp_mem") is
+ * copied. Use **BPF_F_SYSCTL_BASE_NAME** flag to copy base name
+ * only (e.g. "tcp_mem").
+ *
+ * Returns
+ * Number of character copied (not including the trailing NUL).
+ *
+ * **-E2BIG** if the buffer wasn't big enough (*buf* will contain
+ * truncated name in this case).
+ */
+static int (*bpf_sysctl_get_name)(struct bpf_sysctl *ctx, char *buf, unsigned long buf_len, __u64 flags) = (void *) 101;
+
+/*
+ * bpf_sysctl_get_current_value
+ *
+ * Get current value of sysctl as it is presented in /proc/sys
+ * (incl. newline, etc), and copy it as a string into provided
+ * by program buffer *buf* of size *buf_len*.
+ *
+ * The whole value is copied, no matter what file position user
+ * space issued e.g. sys_read at.
+ *
+ * The buffer is always NUL terminated, unless it's zero-sized.
+ *
+ * Returns
+ * Number of character copied (not including the trailing NUL).
+ *
+ * **-E2BIG** if the buffer wasn't big enough (*buf* will contain
+ * truncated name in this case).
+ *
+ * **-EINVAL** if current value was unavailable, e.g. because
+ * sysctl is uninitialized and read returns -EIO for it.
+ */
+static int (*bpf_sysctl_get_current_value)(struct bpf_sysctl *ctx, char *buf, unsigned long buf_len) = (void *) 102;
+
+/*
+ * bpf_sysctl_get_new_value
+ *
+ * Get new value being written by user space to sysctl (before
+ * the actual write happens) and copy it as a string into
+ * provided by program buffer *buf* of size *buf_len*.
+ *
+ * User space may write new value at file position > 0.
+ *
+ * The buffer is always NUL terminated, unless it's zero-sized.
+ *
+ * Returns
+ * Number of character copied (not including the trailing NUL).
+ *
+ * **-E2BIG** if the buffer wasn't big enough (*buf* will contain
+ * truncated name in this case).
+ *
+ * **-EINVAL** if sysctl is being read.
+ */
+static int (*bpf_sysctl_get_new_value)(struct bpf_sysctl *ctx, char *buf, unsigned long buf_len) = (void *) 103;
+
+/*
+ * bpf_sysctl_set_new_value
+ *
+ * Override new value being written by user space to sysctl with
+ * value provided by program in buffer *buf* of size *buf_len*.
+ *
+ * *buf* should contain a string in same form as provided by user
+ * space on sysctl write.
+ *
+ * User space may write new value at file position > 0. To override
+ * the whole sysctl value file position should be set to zero.
+ *
+ * Returns
+ * 0 on success.
+ *
+ * **-E2BIG** if the *buf_len* is too big.
+ *
+ * **-EINVAL** if sysctl is being read.
+ */
+static int (*bpf_sysctl_set_new_value)(struct bpf_sysctl *ctx, const char *buf, unsigned long buf_len) = (void *) 104;
+
+/*
+ * bpf_strtol
+ *
+ * Convert the initial part of the string from buffer *buf* of
+ * size *buf_len* to a long integer according to the given base
+ * and save the result in *res*.
+ *
+ * The string may begin with an arbitrary amount of white space
+ * (as determined by **isspace**\ (3)) followed by a single
+ * optional '**-**' sign.
+ *
+ * Five least significant bits of *flags* encode base, other bits
+ * are currently unused.
+ *
+ * Base must be either 8, 10, 16 or 0 to detect it automatically
+ * similar to user space **strtol**\ (3).
+ *
+ * Returns
+ * Number of characters consumed on success. Must be positive but
+ * no more than *buf_len*.
+ *
+ * **-EINVAL** if no valid digits were found or unsupported base
+ * was provided.
+ *
+ * **-ERANGE** if resulting value was out of range.
+ */
+static int (*bpf_strtol)(const char *buf, unsigned long buf_len, __u64 flags, long *res) = (void *) 105;
+
+/*
+ * bpf_strtoul
+ *
+ * Convert the initial part of the string from buffer *buf* of
+ * size *buf_len* to an unsigned long integer according to the
+ * given base and save the result in *res*.
+ *
+ * The string may begin with an arbitrary amount of white space
+ * (as determined by **isspace**\ (3)).
+ *
+ * Five least significant bits of *flags* encode base, other bits
+ * are currently unused.
+ *
+ * Base must be either 8, 10, 16 or 0 to detect it automatically
+ * similar to user space **strtoul**\ (3).
+ *
+ * Returns
+ * Number of characters consumed on success. Must be positive but
+ * no more than *buf_len*.
+ *
+ * **-EINVAL** if no valid digits were found or unsupported base
+ * was provided.
+ *
+ * **-ERANGE** if resulting value was out of range.
+ */
+static int (*bpf_strtoul)(const char *buf, unsigned long buf_len, __u64 flags, unsigned long *res) = (void *) 106;
+
+/*
+ * bpf_sk_storage_get
+ *
+ * Get a bpf-local-storage from a *sk*.
+ *
+ * Logically, it could be thought of getting the value from
+ * a *map* with *sk* as the **key**. From this
+ * perspective, the usage is not much different from
+ * **bpf_map_lookup_elem**\ (*map*, **&**\ *sk*) except this
+ * helper enforces the key must be a full socket and the map must
+ * be a **BPF_MAP_TYPE_SK_STORAGE** also.
+ *
+ * Underneath, the value is stored locally at *sk* instead of
+ * the *map*. The *map* is used as the bpf-local-storage
+ * "type". The bpf-local-storage "type" (i.e. the *map*) is
+ * searched against all bpf-local-storages residing at *sk*.
+ *
+ * An optional *flags* (**BPF_SK_STORAGE_GET_F_CREATE**) can be
+ * used such that a new bpf-local-storage will be
+ * created if one does not exist. *value* can be used
+ * together with **BPF_SK_STORAGE_GET_F_CREATE** to specify
+ * the initial value of a bpf-local-storage. If *value* is
+ * **NULL**, the new bpf-local-storage will be zero initialized.
+ *
+ * Returns
+ * A bpf-local-storage pointer is returned on success.
+ *
+ * **NULL** if not found or there was an error in adding
+ * a new bpf-local-storage.
+ */
+static void *(*bpf_sk_storage_get)(void *map, struct bpf_sock *sk, void *value, __u64 flags) = (void *) 107;
+
+/*
+ * bpf_sk_storage_delete
+ *
+ * Delete a bpf-local-storage from a *sk*.
+ *
+ * Returns
+ * 0 on success.
+ *
+ * **-ENOENT** if the bpf-local-storage cannot be found.
+ */
+static int (*bpf_sk_storage_delete)(void *map, struct bpf_sock *sk) = (void *) 108;
+
+/*
+ * bpf_send_signal
+ *
+ * Send signal *sig* to the current task.
+ *
+ * Returns
+ * 0 on success or successfully queued.
+ *
+ * **-EBUSY** if work queue under nmi is full.
+ *
+ * **-EINVAL** if *sig* is invalid.
+ *
+ * **-EPERM** if no permission to send the *sig*.
+ *
+ * **-EAGAIN** if bpf program can try again.
+ */
+static int (*bpf_send_signal)(__u32 sig) = (void *) 109;
+
+/*
+ * bpf_tcp_gen_syncookie
+ *
+ * Try to issue a SYN cookie for the packet with corresponding
+ * IP/TCP headers, *iph* and *th*, on the listening socket in *sk*.
+ *
+ * *iph* points to the start of the IPv4 or IPv6 header, while
+ * *iph_len* contains **sizeof**\ (**struct iphdr**) or
+ * **sizeof**\ (**struct ip6hdr**).
+ *
+ * *th* points to the start of the TCP header, while *th_len*
+ * contains the length of the TCP header.
+ *
+ *
+ * Returns
+ * On success, lower 32 bits hold the generated SYN cookie in
+ * followed by 16 bits which hold the MSS value for that cookie,
+ * and the top 16 bits are unused.
+ *
+ * On failure, the returned value is one of the following:
+ *
+ * **-EINVAL** SYN cookie cannot be issued due to error
+ *
+ * **-ENOENT** SYN cookie should not be issued (no SYN flood)
+ *
+ * **-EOPNOTSUPP** kernel configuration does not enable SYN cookies
+ *
+ * **-EPROTONOSUPPORT** IP packet version is not 4 or 6
+ */
+static __s64 (*bpf_tcp_gen_syncookie)(struct bpf_sock *sk, void *iph, __u32 iph_len, struct tcphdr *th, __u32 th_len) = (void *) 110;
+
+
--
2.17.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH bpf-next 3/3] libbpf: auto-generate list of BPF helper definitions
2019-10-05 7:59 ` [PATCH bpf-next 3/3] libbpf: auto-generate list of " Andrii Nakryiko
@ 2019-10-05 17:10 ` Alexei Starovoitov
2019-10-05 18:24 ` Andrii Nakryiko
0 siblings, 1 reply; 8+ messages in thread
From: Alexei Starovoitov @ 2019-10-05 17:10 UTC (permalink / raw)
To: Andrii Nakryiko, bpf, netdev, daniel; +Cc: andrii.nakryiko, Kernel Team
On 10/5/19 12:59 AM, Andrii Nakryiko wrote:
> Get rid of list of BPF helpers in bpf_helpers.h (irony...) and
> auto-generate it into bpf_helpers_defs.h, which is now included from
> bpf_helpers.h.
>
> Suggested-by: Alexei Starovoitov<ast@fb.com>
> Signed-off-by: Andrii Nakryiko<andriin@fb.com>
> ---
> tools/lib/bpf/Makefile | 8 +-
> tools/lib/bpf/bpf_helpers.h | 264 +--
> tools/lib/bpf/bpf_helpers_defs.h | 2677 ++++++++++++++++++++++++++++++
> 3 files changed, 2685 insertions(+), 264 deletions(-)
> create mode 100644 tools/lib/bpf/bpf_helpers_defs.h
Approach looks good to me.
imo that's better than messing with macros.
Using bpf_helpers_doc.py as part of build will help man pages too.
I think we were sloppy documenting helpers, since only Quentin
was running that script regularly.
Only question is what is the reason to commit generated .h into git?
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH bpf-next 3/3] libbpf: auto-generate list of BPF helper definitions
2019-10-05 17:10 ` Alexei Starovoitov
@ 2019-10-05 18:24 ` Andrii Nakryiko
2019-10-06 1:01 ` Alexei Starovoitov
0 siblings, 1 reply; 8+ messages in thread
From: Andrii Nakryiko @ 2019-10-05 18:24 UTC (permalink / raw)
To: Alexei Starovoitov
Cc: Andrii Nakryiko, bpf, netdev, daniel, Kernel Team, Quentin Monnet
On Sat, Oct 5, 2019 at 10:10 AM Alexei Starovoitov <ast@fb.com> wrote:
>
> On 10/5/19 12:59 AM, Andrii Nakryiko wrote:
> > Get rid of list of BPF helpers in bpf_helpers.h (irony...) and
> > auto-generate it into bpf_helpers_defs.h, which is now included from
> > bpf_helpers.h.
> >
> > Suggested-by: Alexei Starovoitov<ast@fb.com>
> > Signed-off-by: Andrii Nakryiko<andriin@fb.com>
> > ---
> > tools/lib/bpf/Makefile | 8 +-
> > tools/lib/bpf/bpf_helpers.h | 264 +--
> > tools/lib/bpf/bpf_helpers_defs.h | 2677 ++++++++++++++++++++++++++++++
> > 3 files changed, 2685 insertions(+), 264 deletions(-)
> > create mode 100644 tools/lib/bpf/bpf_helpers_defs.h
>
> Approach looks good to me.
> imo that's better than messing with macros.
>
> Using bpf_helpers_doc.py as part of build will help man pages too.
> I think we were sloppy documenting helpers, since only Quentin
> was running that script regularly.
Yep, I agree, I had to fix few things, as well as (char *) vs (void *)
vs (__u8 *) differences were causing some extra warnings.
Please check the list of type translations whether they make sense.
>
> Only question is what is the reason to commit generated .h into git?
So originally I didn't want to depend on system UAPI headers during
Github build. But now I recalled that we do have latest UAPI synced
into Github's include/ subdir, so that's not an obstacle really. We'll
just need to re-license bpf_helpers_doc.py (I don't think Quentin will
mind) and start syncing it to Github (not a big deal at all).
There is still a benefit in having it checked in: easy to spot if
script does something wrong and double-check the changes (after
initial big commit, of course).
If you think that's not reason enough, let me know and I can drop it in v2.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH bpf-next 3/3] libbpf: auto-generate list of BPF helper definitions
2019-10-05 18:24 ` Andrii Nakryiko
@ 2019-10-06 1:01 ` Alexei Starovoitov
2019-10-06 2:29 ` Andrii Nakryiko
0 siblings, 1 reply; 8+ messages in thread
From: Alexei Starovoitov @ 2019-10-06 1:01 UTC (permalink / raw)
To: Andrii Nakryiko
Cc: Andrii Nakryiko, bpf, netdev, daniel, Kernel Team, Quentin Monnet
On 10/5/19 11:24 AM, Andrii Nakryiko wrote:
> On Sat, Oct 5, 2019 at 10:10 AM Alexei Starovoitov <ast@fb.com> wrote:
>>
>> On 10/5/19 12:59 AM, Andrii Nakryiko wrote:
>>> Get rid of list of BPF helpers in bpf_helpers.h (irony...) and
>>> auto-generate it into bpf_helpers_defs.h, which is now included from
>>> bpf_helpers.h.
>>>
>>> Suggested-by: Alexei Starovoitov<ast@fb.com>
>>> Signed-off-by: Andrii Nakryiko<andriin@fb.com>
>>> ---
>>> tools/lib/bpf/Makefile | 8 +-
>>> tools/lib/bpf/bpf_helpers.h | 264 +--
>>> tools/lib/bpf/bpf_helpers_defs.h | 2677 ++++++++++++++++++++++++++++++
>>> 3 files changed, 2685 insertions(+), 264 deletions(-)
>>> create mode 100644 tools/lib/bpf/bpf_helpers_defs.h
>>
>> Approach looks good to me.
>> imo that's better than messing with macros.
>>
>> Using bpf_helpers_doc.py as part of build will help man pages too.
>> I think we were sloppy documenting helpers, since only Quentin
>> was running that script regularly.
>
> Yep, I agree, I had to fix few things, as well as (char *) vs (void *)
> vs (__u8 *) differences were causing some extra warnings.
> Please check the list of type translations whether they make sense.
yes. These conversions make sense.
Only one sk_buff->__sk_buff won't work for too long.
Once my btf vmlinux stuff lands both structs will be possible.
>>
>> Only question is what is the reason to commit generated .h into git?
>
> So originally I didn't want to depend on system UAPI headers during
> Github build. But now I recalled that we do have latest UAPI synced
> into Github's include/ subdir, so that's not an obstacle really. We'll
> just need to re-license bpf_helpers_doc.py (I don't think Quentin will
> mind) and start syncing it to Github (not a big deal at all).
github sync script can run make, grab generated .h,
and check it in into github.
>
> There is still a benefit in having it checked in: easy to spot if
> script does something wrong and double-check the changes (after
> initial big commit, of course).
>
> If you think that's not reason enough, let me know and I can drop it in v2.
I don't remember too many cases when generated files were committed.
My preference to keep it out of kernel git.
github/libbpf is a pure mirror. That .h can be committed there.
The whole thing is automatic, so we don't need to move .py
into github too.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH bpf-next 3/3] libbpf: auto-generate list of BPF helper definitions
2019-10-06 1:01 ` Alexei Starovoitov
@ 2019-10-06 2:29 ` Andrii Nakryiko
0 siblings, 0 replies; 8+ messages in thread
From: Andrii Nakryiko @ 2019-10-06 2:29 UTC (permalink / raw)
To: Alexei Starovoitov
Cc: Andrii Nakryiko, bpf, netdev, daniel, Kernel Team, Quentin Monnet
On Sat, Oct 5, 2019 at 6:01 PM Alexei Starovoitov <ast@fb.com> wrote:
>
> On 10/5/19 11:24 AM, Andrii Nakryiko wrote:
> > On Sat, Oct 5, 2019 at 10:10 AM Alexei Starovoitov <ast@fb.com> wrote:
> >>
> >> On 10/5/19 12:59 AM, Andrii Nakryiko wrote:
> >>> Get rid of list of BPF helpers in bpf_helpers.h (irony...) and
> >>> auto-generate it into bpf_helpers_defs.h, which is now included from
> >>> bpf_helpers.h.
> >>>
> >>> Suggested-by: Alexei Starovoitov<ast@fb.com>
> >>> Signed-off-by: Andrii Nakryiko<andriin@fb.com>
> >>> ---
> >>> tools/lib/bpf/Makefile | 8 +-
> >>> tools/lib/bpf/bpf_helpers.h | 264 +--
> >>> tools/lib/bpf/bpf_helpers_defs.h | 2677 ++++++++++++++++++++++++++++++
> >>> 3 files changed, 2685 insertions(+), 264 deletions(-)
> >>> create mode 100644 tools/lib/bpf/bpf_helpers_defs.h
> >>
> >> Approach looks good to me.
> >> imo that's better than messing with macros.
> >>
> >> Using bpf_helpers_doc.py as part of build will help man pages too.
> >> I think we were sloppy documenting helpers, since only Quentin
> >> was running that script regularly.
> >
> > Yep, I agree, I had to fix few things, as well as (char *) vs (void *)
> > vs (__u8 *) differences were causing some extra warnings.
> > Please check the list of type translations whether they make sense.
>
> yes. These conversions make sense.
cool, thanks for checking!
> Only one sk_buff->__sk_buff won't work for too long.
> Once my btf vmlinux stuff lands both structs will be possible.
I guess it will have to be sk_buff -> void conversion then, but we'll
do it later.
>
> >>
> >> Only question is what is the reason to commit generated .h into git?
> >
> > So originally I didn't want to depend on system UAPI headers during
> > Github build. But now I recalled that we do have latest UAPI synced
> > into Github's include/ subdir, so that's not an obstacle really. We'll
> > just need to re-license bpf_helpers_doc.py (I don't think Quentin will
> > mind) and start syncing it to Github (not a big deal at all).
>
> github sync script can run make, grab generated .h,
> and check it in into github.
Haven't considered that. That will work as well, a bit more work for
me on sync script side, but that's ok.
>
> >
> > There is still a benefit in having it checked in: easy to spot if
> > script does something wrong and double-check the changes (after
> > initial big commit, of course).
> >
> > If you think that's not reason enough, let me know and I can drop it in v2.
>
> I don't remember too many cases when generated files were committed.
> My preference to keep it out of kernel git.
> github/libbpf is a pure mirror. That .h can be committed there.
> The whole thing is automatic, so we don't need to move .py
> into github too.
>
Yeah, makes sense, will submit v2 w/ bpf_helpers_defs.h added to .gitignore
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2019-10-06 2:29 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-05 7:59 [PATCH bpf-next 0/3] Auto-generate list of BPF helpers Andrii Nakryiko
2019-10-05 7:59 ` [PATCH bpf-next 1/3] uapi/bpf: fix helper docs Andrii Nakryiko
2019-10-05 7:59 ` [PATCH bpf-next 2/3] scripts/bpf: teach bpf_helpers_doc.py to dump BPF helper definitions Andrii Nakryiko
2019-10-05 7:59 ` [PATCH bpf-next 3/3] libbpf: auto-generate list of " Andrii Nakryiko
2019-10-05 17:10 ` Alexei Starovoitov
2019-10-05 18:24 ` Andrii Nakryiko
2019-10-06 1:01 ` Alexei Starovoitov
2019-10-06 2:29 ` Andrii Nakryiko
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.