From: <pbhagavatula@marvell.com>
To: <arybchenko@solarflare.com>, <jerinj@marvell.com>,
Nicolas Chautru <nicolas.chautru@intel.com>,
Chas Williams <chas3@att.com>, David Hunt <david.hunt@intel.com>,
Harry van Haaren <harry.van.haaren@intel.com>,
"Marko Kovacevic" <marko.kovacevic@intel.com>,
Ori Kam <orika@mellanox.com>,
"Bruce Richardson" <bruce.richardson@intel.com>,
Radu Nicolau <radu.nicolau@intel.com>,
Akhil Goyal <akhil.goyal@nxp.com>,
Tomasz Kantecki <tomasz.kantecki@intel.com>,
Bernard Iremonger <bernard.iremonger@intel.com>,
Cristian Dumitrescu <cristian.dumitrescu@intel.com>,
Konstantin Ananyev <konstantin.ananyev@intel.com>,
Ferruh Yigit <ferruh.yigit@intel.com>,
"Declan Doherty" <declan.doherty@intel.com>,
Reshma Pattan <reshma.pattan@intel.com>,
John McNamara <john.mcnamara@intel.com>,
Xiaoyun Li <xiaoyun.li@intel.com>,
Jasvinder Singh <jasvinder.singh@intel.com>,
Byron Marohn <byron.marohn@intel.com>,
Yipeng Wang <yipeng1.wang@intel.com>,
"Maxime Coquelin" <maxime.coquelin@redhat.com>,
Tiwei Bie <tiwei.bie@intel.com>,
Zhihong Wang <zhihong.wang@intel.com>
Cc: <dev@dpdk.org>, Pavan Nikhilesh <pbhagavatula@marvell.com>
Subject: [dpdk-dev] [PATCH v10 7/7] examples: disable Rx packet type parsing
Date: Wed, 9 Oct 2019 21:03:56 +0530 [thread overview]
Message-ID: <20191009153357.926-8-pbhagavatula@marvell.com> (raw)
In-Reply-To: <20191009153357.926-1-pbhagavatula@marvell.com>
From: Pavan Nikhilesh <pbhagavatula@marvell.com>
Disable packet type parsing in examples that don't use
`rte_mbuf::packet_type` by setting ptype_mask as 0 in
`rte_eth_dev_set_supported_ptypes`
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
---
examples/bbdev_app/main.c | 1 +
examples/bond/main.c | 2 ++
examples/distributor/Makefile | 1 +
examples/distributor/main.c | 1 +
examples/distributor/meson.build | 1 +
examples/eventdev_pipeline/main.c | 2 ++
examples/eventdev_pipeline/meson.build | 1 +
examples/exception_path/Makefile | 1 +
examples/exception_path/main.c | 1 +
examples/exception_path/meson.build | 1 +
examples/flow_classify/flow_classify.c | 1 +
examples/flow_filtering/Makefile | 1 +
examples/flow_filtering/main.c | 1 +
examples/flow_filtering/meson.build | 1 +
examples/ip_pipeline/link.c | 1 +
examples/ip_reassembly/Makefile | 1 +
examples/ip_reassembly/main.c | 2 ++
examples/ip_reassembly/meson.build | 1 +
examples/ipsec-secgw/ipsec-secgw.c | 2 ++
examples/ipv4_multicast/Makefile | 1 +
examples/ipv4_multicast/main.c | 2 ++
examples/ipv4_multicast/meson.build | 1 +
examples/kni/main.c | 1 +
examples/l2fwd-cat/Makefile | 1 +
examples/l2fwd-cat/l2fwd-cat.c | 1 +
examples/l2fwd-cat/meson.build | 1 +
examples/l2fwd-crypto/main.c | 2 ++
examples/l2fwd-jobstats/Makefile | 1 +
examples/l2fwd-jobstats/main.c | 2 ++
examples/l2fwd-jobstats/meson.build | 1 +
examples/l2fwd-keepalive/Makefile | 1 +
examples/l2fwd-keepalive/main.c | 2 ++
examples/l2fwd-keepalive/meson.build | 1 +
examples/l2fwd/Makefile | 1 +
examples/l2fwd/main.c | 2 ++
examples/l2fwd/meson.build | 1 +
examples/l3fwd-acl/Makefile | 1 +
examples/l3fwd-acl/main.c | 2 ++
examples/l3fwd-acl/meson.build | 1 +
examples/l3fwd-vf/Makefile | 1 +
examples/l3fwd-vf/main.c | 2 ++
examples/l3fwd-vf/meson.build | 1 +
examples/link_status_interrupt/Makefile | 1 +
examples/link_status_interrupt/main.c | 2 ++
examples/link_status_interrupt/meson.build | 1 +
examples/load_balancer/Makefile | 1 +
examples/load_balancer/init.c | 2 ++
examples/load_balancer/meson.build | 1 +
examples/packet_ordering/Makefile | 1 +
examples/packet_ordering/main.c | 1 +
examples/packet_ordering/meson.build | 1 +
examples/ptpclient/Makefile | 1 +
examples/ptpclient/meson.build | 1 +
examples/ptpclient/ptpclient.c | 1 +
examples/qos_meter/Makefile | 1 +
examples/qos_meter/main.c | 2 ++
examples/qos_meter/meson.build | 1 +
examples/qos_sched/Makefile | 1 +
examples/qos_sched/init.c | 1 +
examples/qos_sched/meson.build | 1 +
examples/quota_watermark/qw/Makefile | 1 +
examples/quota_watermark/qw/init.c | 1 +
examples/rxtx_callbacks/main.c | 1 +
examples/server_node_efd/server/Makefile | 1 +
examples/server_node_efd/server/init.c | 1 +
examples/skeleton/Makefile | 1 +
examples/skeleton/basicfwd.c | 1 +
examples/skeleton/meson.build | 1 +
examples/tep_termination/Makefile | 1 +
examples/tep_termination/meson.build | 1 +
examples/tep_termination/vxlan_setup.c | 1 +
examples/vhost/Makefile | 1 +
examples/vhost/main.c | 1 +
examples/vm_power_manager/Makefile | 1 +
examples/vm_power_manager/main.c | 1 +
examples/vm_power_manager/meson.build | 1 +
examples/vmdq/Makefile | 1 +
examples/vmdq/main.c | 1 +
examples/vmdq/meson.build | 1 +
examples/vmdq_dcb/Makefile | 1 +
examples/vmdq_dcb/main.c | 1 +
examples/vmdq_dcb/meson.build | 1 +
82 files changed, 96 insertions(+)
diff --git a/examples/bbdev_app/main.c b/examples/bbdev_app/main.c
index 9acf666dc..277725a6b 100644
--- a/examples/bbdev_app/main.c
+++ b/examples/bbdev_app/main.c
@@ -478,6 +478,7 @@ initialize_ports(struct app_config_params *app_params,
}
rte_eth_promiscuous_enable(port_id);
+ rte_eth_dev_set_supported_ptypes(port_id, RTE_PTYPE_UNKNOWN, NULL, 0);
rte_eth_macaddr_get(port_id, &bbdev_port_eth_addr);
print_mac(port_id, &bbdev_port_eth_addr);
diff --git a/examples/bond/main.c b/examples/bond/main.c
index 1c0df9d46..f92104908 100644
--- a/examples/bond/main.c
+++ b/examples/bond/main.c
@@ -195,6 +195,7 @@ slave_port_init(uint16_t portid, struct rte_mempool *mbuf_pool)
rte_exit(retval, "port %u: TX queue 0 setup failed (res=%d)",
portid, retval);
+ rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN, NULL, 0);
retval = rte_eth_dev_start(portid);
if (retval < 0)
rte_exit(retval,
@@ -271,6 +272,7 @@ bond_port_init(struct rte_mempool *mbuf_pool)
rte_exit(retval, "port %u: TX queue 0 setup failed (res=%d)",
BOND_PORT, retval);
+ rte_eth_dev_set_supported_ptypes(BOND_PORT, RTE_PTYPE_UNKNOWN, NULL, 0);
retval = rte_eth_dev_start(BOND_PORT);
if (retval < 0)
rte_exit(retval, "Start port %d failed (res=%d)", BOND_PORT, retval);
diff --git a/examples/distributor/Makefile b/examples/distributor/Makefile
index bac8d5578..a2a477279 100644
--- a/examples/distributor/Makefile
+++ b/examples/distributor/Makefile
@@ -50,6 +50,7 @@ RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.conf
include $(RTE_SDK)/mk/rte.vars.mk
CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -DALLOW_EXPERIMENTAL_API
# workaround for a gcc bug with noreturn attribute
# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
diff --git a/examples/distributor/main.c b/examples/distributor/main.c
index 81d7ca61d..35930d8a3 100644
--- a/examples/distributor/main.c
+++ b/examples/distributor/main.c
@@ -162,6 +162,7 @@ port_init(uint16_t port, struct rte_mempool *mbuf_pool)
return retval;
}
+ rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN, NULL, 0);
retval = rte_eth_dev_start(port);
if (retval < 0)
return retval;
diff --git a/examples/distributor/meson.build b/examples/distributor/meson.build
index 26f108d65..c2976f6bd 100644
--- a/examples/distributor/meson.build
+++ b/examples/distributor/meson.build
@@ -10,6 +10,7 @@
build = dpdk_conf.has('RTE_LIBRTE_POWER')
deps += ['distributor', 'power']
+allow_experimental_apis = true
sources = files(
'main.c'
)
diff --git a/examples/eventdev_pipeline/main.c b/examples/eventdev_pipeline/main.c
index a73b61d59..66b6420f9 100644
--- a/examples/eventdev_pipeline/main.c
+++ b/examples/eventdev_pipeline/main.c
@@ -393,6 +393,8 @@ main(int argc, char **argv)
/* Start the Ethernet port. */
RTE_ETH_FOREACH_DEV(portid) {
+ rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN,
+ NULL, 0);
err = rte_eth_dev_start(portid);
if (err < 0)
rte_exit(EXIT_FAILURE, "Error starting ethdev %d\n",
diff --git a/examples/eventdev_pipeline/meson.build b/examples/eventdev_pipeline/meson.build
index a54c35aa7..0fc916b05 100644
--- a/examples/eventdev_pipeline/meson.build
+++ b/examples/eventdev_pipeline/meson.build
@@ -7,6 +7,7 @@
# DPDK instance, use 'make'
deps += 'eventdev'
+allow_experimental_apis = true
sources = files(
'main.c',
'pipeline_worker_generic.c',
diff --git a/examples/exception_path/Makefile b/examples/exception_path/Makefile
index 90c7f133a..a7c961276 100644
--- a/examples/exception_path/Makefile
+++ b/examples/exception_path/Makefile
@@ -51,6 +51,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
CFLAGS += -O3
CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -DALLOW_EXPERIMENTAL_API
include $(RTE_SDK)/mk/rte.extapp.mk
diff --git a/examples/exception_path/main.c b/examples/exception_path/main.c
index 0d79e5a24..0165e4553 100644
--- a/examples/exception_path/main.c
+++ b/examples/exception_path/main.c
@@ -464,6 +464,7 @@ init_port(uint16_t port)
FATAL_ERROR("Could not setup up TX queue for port%u (%d)",
port, ret);
+ rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN, NULL, 0);
ret = rte_eth_dev_start(port);
if (ret < 0)
FATAL_ERROR("Could not start port%u (%d)", port, ret);
diff --git a/examples/exception_path/meson.build b/examples/exception_path/meson.build
index c34e11e36..2b0a25036 100644
--- a/examples/exception_path/meson.build
+++ b/examples/exception_path/meson.build
@@ -6,6 +6,7 @@
# To build this example as a standalone application with an already-installed
# DPDK instance, use 'make'
+allow_experimental_apis = true
sources = files(
'main.c'
)
diff --git a/examples/flow_classify/flow_classify.c b/examples/flow_classify/flow_classify.c
index bc7f43ea9..f34d27428 100644
--- a/examples/flow_classify/flow_classify.c
+++ b/examples/flow_classify/flow_classify.c
@@ -231,6 +231,7 @@ port_init(uint8_t port, struct rte_mempool *mbuf_pool)
}
/* Start the Ethernet port. */
+ rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN, NULL, 0);
retval = rte_eth_dev_start(port);
if (retval < 0)
return retval;
diff --git a/examples/flow_filtering/Makefile b/examples/flow_filtering/Makefile
index a63a75555..793a08fae 100644
--- a/examples/flow_filtering/Makefile
+++ b/examples/flow_filtering/Makefile
@@ -49,6 +49,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
CFLAGS += -O3
CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -DALLOW_EXPERIMENTAL_API
include $(RTE_SDK)/mk/rte.extapp.mk
diff --git a/examples/flow_filtering/main.c b/examples/flow_filtering/main.c
index a0487be77..4b8712324 100644
--- a/examples/flow_filtering/main.c
+++ b/examples/flow_filtering/main.c
@@ -176,6 +176,7 @@ init_port(void)
}
rte_eth_promiscuous_enable(port_id);
+ rte_eth_dev_set_supported_ptypes(port_id, RTE_PTYPE_UNKNOWN, NULL, 0);
ret = rte_eth_dev_start(port_id);
if (ret < 0) {
rte_exit(EXIT_FAILURE,
diff --git a/examples/flow_filtering/meson.build b/examples/flow_filtering/meson.build
index 407795c42..6f5d1b08a 100644
--- a/examples/flow_filtering/meson.build
+++ b/examples/flow_filtering/meson.build
@@ -6,6 +6,7 @@
# To build this example as a standalone application with an already-installed
# DPDK instance, use 'make'
+allow_experimental_apis = true
sources = files(
'main.c',
)
diff --git a/examples/ip_pipeline/link.c b/examples/ip_pipeline/link.c
index 787eb866a..7d02962e3 100644
--- a/examples/ip_pipeline/link.c
+++ b/examples/ip_pipeline/link.c
@@ -205,6 +205,7 @@ link_create(const char *name, struct link_params *params)
return NULL;
}
+ rte_eth_dev_set_supported_ptypes(port_id, RTE_PTYPE_UNKNOWN, NULL, 0);
/* Port start */
status = rte_eth_dev_start(port_id);
if (status < 0)
diff --git a/examples/ip_reassembly/Makefile b/examples/ip_reassembly/Makefile
index 0b1a904e0..19c462388 100644
--- a/examples/ip_reassembly/Makefile
+++ b/examples/ip_reassembly/Makefile
@@ -52,6 +52,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
CFLAGS += -O3
CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -DALLOW_EXPERIMENTAL_API
# workaround for a gcc bug with noreturn attribute
# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
diff --git a/examples/ip_reassembly/main.c b/examples/ip_reassembly/main.c
index 38b39be6b..f2c28ef76 100644
--- a/examples/ip_reassembly/main.c
+++ b/examples/ip_reassembly/main.c
@@ -1158,6 +1158,8 @@ main(int argc, char **argv)
if ((enabled_port_mask & (1 << portid)) == 0) {
continue;
}
+ rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN,
+ NULL, 0);
/* Start device */
ret = rte_eth_dev_start(portid);
if (ret < 0)
diff --git a/examples/ip_reassembly/meson.build b/examples/ip_reassembly/meson.build
index 8ebd48291..8a667c265 100644
--- a/examples/ip_reassembly/meson.build
+++ b/examples/ip_reassembly/meson.build
@@ -7,6 +7,7 @@
# DPDK instance, use 'make'
deps += ['lpm', 'ip_frag']
+allow_experimental_apis = true
sources = files(
'main.c'
)
diff --git a/examples/ipsec-secgw/ipsec-secgw.c b/examples/ipsec-secgw/ipsec-secgw.c
index 345c8e51b..2e902fba2 100644
--- a/examples/ipsec-secgw/ipsec-secgw.c
+++ b/examples/ipsec-secgw/ipsec-secgw.c
@@ -2451,6 +2451,8 @@ main(int32_t argc, char **argv)
if ((enabled_port_mask & (1 << portid)) == 0)
continue;
+ rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN,
+ NULL, 0);
/*
* Start device
* note: device must be started before a flow rule
diff --git a/examples/ipv4_multicast/Makefile b/examples/ipv4_multicast/Makefile
index 5f8a67dd4..5171f7ab2 100644
--- a/examples/ipv4_multicast/Makefile
+++ b/examples/ipv4_multicast/Makefile
@@ -52,6 +52,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
CFLAGS += -O3
CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -DALLOW_EXPERIMENTAL_API
# workaround for a gcc bug with noreturn attribute
# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
diff --git a/examples/ipv4_multicast/main.c b/examples/ipv4_multicast/main.c
index 72eaadc51..3d327a00b 100644
--- a/examples/ipv4_multicast/main.c
+++ b/examples/ipv4_multicast/main.c
@@ -765,6 +765,8 @@ main(int argc, char **argv)
qconf->tx_queue_id[portid] = queueid;
queueid++;
}
+ rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN,
+ NULL, 0);
rte_eth_allmulticast_enable(portid);
/* Start device */
ret = rte_eth_dev_start(portid);
diff --git a/examples/ipv4_multicast/meson.build b/examples/ipv4_multicast/meson.build
index d9e4c7c21..6969e2c54 100644
--- a/examples/ipv4_multicast/meson.build
+++ b/examples/ipv4_multicast/meson.build
@@ -7,6 +7,7 @@
# DPDK instance, use 'make'
deps += 'hash'
+allow_experimental_apis = true
sources = files(
'main.c'
)
diff --git a/examples/kni/main.c b/examples/kni/main.c
index 4710d7176..99f500e25 100644
--- a/examples/kni/main.c
+++ b/examples/kni/main.c
@@ -625,6 +625,7 @@ init_port(uint16_t port)
rte_exit(EXIT_FAILURE, "Could not setup up TX queue for "
"port%u (%d)\n", (unsigned)port, ret);
+ rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN, NULL, 0);
ret = rte_eth_dev_start(port);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Could not start port%u (%d)\n",
diff --git a/examples/l2fwd-cat/Makefile b/examples/l2fwd-cat/Makefile
index c1960d6d3..d6a25e42a 100644
--- a/examples/l2fwd-cat/Makefile
+++ b/examples/l2fwd-cat/Makefile
@@ -66,6 +66,7 @@ endif
EXTRA_CFLAGS += -O3 -g -Wfatal-errors
CFLAGS += -I$(PQOS_INSTALL_PATH)/../include
+CFLAGS += -DALLOW_EXPERIMENTAL_API
LDLIBS += -L$(PQOS_INSTALL_PATH)
LDLIBS += -lpqos
diff --git a/examples/l2fwd-cat/l2fwd-cat.c b/examples/l2fwd-cat/l2fwd-cat.c
index b34b40a00..a54a1ed25 100644
--- a/examples/l2fwd-cat/l2fwd-cat.c
+++ b/examples/l2fwd-cat/l2fwd-cat.c
@@ -67,6 +67,7 @@ port_init(uint16_t port, struct rte_mempool *mbuf_pool)
return retval;
}
+ rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN, NULL, 0);
/* Start the Ethernet port. */
retval = rte_eth_dev_start(port);
if (retval < 0)
diff --git a/examples/l2fwd-cat/meson.build b/examples/l2fwd-cat/meson.build
index 4e2777a03..37c96040d 100644
--- a/examples/l2fwd-cat/meson.build
+++ b/examples/l2fwd-cat/meson.build
@@ -10,6 +10,7 @@ pqos = cc.find_library('pqos', required: false)
build = pqos.found()
ext_deps += pqos
cflags += '-I/usr/local/include' # assume pqos lib installed in /usr/local
+allow_experimental_apis = true
sources = files(
'cat.c', 'l2fwd-cat.c'
)
diff --git a/examples/l2fwd-crypto/main.c b/examples/l2fwd-crypto/main.c
index 3fe2ba725..5071ef389 100644
--- a/examples/l2fwd-crypto/main.c
+++ b/examples/l2fwd-crypto/main.c
@@ -2559,6 +2559,8 @@ initialize_ports(struct l2fwd_crypto_options *options)
return -1;
}
+ rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN,
+ NULL, 0);
/* Start device */
retval = rte_eth_dev_start(portid);
if (retval < 0) {
diff --git a/examples/l2fwd-jobstats/Makefile b/examples/l2fwd-jobstats/Makefile
index 729a39e93..09834e979 100644
--- a/examples/l2fwd-jobstats/Makefile
+++ b/examples/l2fwd-jobstats/Makefile
@@ -52,6 +52,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
CFLAGS += -O3
CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -DALLOW_EXPERIMENTAL_API
include $(RTE_SDK)/mk/rte.extapp.mk
endif
diff --git a/examples/l2fwd-jobstats/main.c b/examples/l2fwd-jobstats/main.c
index 77e44dc82..03d986a68 100644
--- a/examples/l2fwd-jobstats/main.c
+++ b/examples/l2fwd-jobstats/main.c
@@ -902,6 +902,8 @@ main(int argc, char **argv)
"Cannot set error callback for tx buffer on port %u\n",
portid);
+ rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN,
+ NULL, 0);
/* Start device */
ret = rte_eth_dev_start(portid);
if (ret < 0)
diff --git a/examples/l2fwd-jobstats/meson.build b/examples/l2fwd-jobstats/meson.build
index 1ffd484e2..3653aa7ec 100644
--- a/examples/l2fwd-jobstats/meson.build
+++ b/examples/l2fwd-jobstats/meson.build
@@ -7,6 +7,7 @@
# DPDK instance, use 'make'
deps += ['jobstats', 'timer']
+allow_experimental_apis = true
sources = files(
'main.c'
)
diff --git a/examples/l2fwd-keepalive/Makefile b/examples/l2fwd-keepalive/Makefile
index 37de27a6f..584257ae2 100644
--- a/examples/l2fwd-keepalive/Makefile
+++ b/examples/l2fwd-keepalive/Makefile
@@ -53,6 +53,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
CFLAGS += -O3
CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -DALLOW_EXPERIMENTAL_API
LDFLAGS += -lrt
include $(RTE_SDK)/mk/rte.extapp.mk
diff --git a/examples/l2fwd-keepalive/main.c b/examples/l2fwd-keepalive/main.c
index 9831a4323..8d3e5eadd 100644
--- a/examples/l2fwd-keepalive/main.c
+++ b/examples/l2fwd-keepalive/main.c
@@ -696,6 +696,8 @@ main(int argc, char **argv)
"Cannot set error callback for tx buffer on port %u\n",
portid);
+ rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN,
+ NULL, 0);
/* Start device */
ret = rte_eth_dev_start(portid);
if (ret < 0)
diff --git a/examples/l2fwd-keepalive/meson.build b/examples/l2fwd-keepalive/meson.build
index 6f7b007e1..2dffffaaa 100644
--- a/examples/l2fwd-keepalive/meson.build
+++ b/examples/l2fwd-keepalive/meson.build
@@ -8,6 +8,7 @@
ext_deps += cc.find_library('rt')
deps += 'timer'
+allow_experimental_apis = true
sources = files(
'main.c', 'shm.c'
)
diff --git a/examples/l2fwd/Makefile b/examples/l2fwd/Makefile
index 230352093..123e6161c 100644
--- a/examples/l2fwd/Makefile
+++ b/examples/l2fwd/Makefile
@@ -51,6 +51,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
CFLAGS += -O3
CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -DALLOW_EXPERIMENTAL_API
include $(RTE_SDK)/mk/rte.extapp.mk
endif
diff --git a/examples/l2fwd/main.c b/examples/l2fwd/main.c
index 1e2b14297..b7d6ee2ff 100644
--- a/examples/l2fwd/main.c
+++ b/examples/l2fwd/main.c
@@ -694,6 +694,8 @@ main(int argc, char **argv)
"Cannot set error callback for tx buffer on port %u\n",
portid);
+ rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN,
+ NULL, 0);
/* Start device */
ret = rte_eth_dev_start(portid);
if (ret < 0)
diff --git a/examples/l2fwd/meson.build b/examples/l2fwd/meson.build
index c34e11e36..2b0a25036 100644
--- a/examples/l2fwd/meson.build
+++ b/examples/l2fwd/meson.build
@@ -6,6 +6,7 @@
# To build this example as a standalone application with an already-installed
# DPDK instance, use 'make'
+allow_experimental_apis = true
sources = files(
'main.c'
)
diff --git a/examples/l3fwd-acl/Makefile b/examples/l3fwd-acl/Makefile
index e2c989f71..df590f8e9 100644
--- a/examples/l3fwd-acl/Makefile
+++ b/examples/l3fwd-acl/Makefile
@@ -51,6 +51,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
CFLAGS += -O3
CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -DALLOW_EXPERIMENTAL_API
# workaround for a gcc bug with noreturn attribute
# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
diff --git a/examples/l3fwd-acl/main.c b/examples/l3fwd-acl/main.c
index 0c44df767..e113b1a4d 100644
--- a/examples/l3fwd-acl/main.c
+++ b/examples/l3fwd-acl/main.c
@@ -2056,6 +2056,8 @@ main(int argc, char **argv)
if ((enabled_port_mask & (1 << portid)) == 0)
continue;
+ rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN,
+ NULL, 0);
/* Start device */
ret = rte_eth_dev_start(portid);
if (ret < 0)
diff --git a/examples/l3fwd-acl/meson.build b/examples/l3fwd-acl/meson.build
index 7096e00c1..68cebd6ce 100644
--- a/examples/l3fwd-acl/meson.build
+++ b/examples/l3fwd-acl/meson.build
@@ -7,6 +7,7 @@
# DPDK instance, use 'make'
deps += ['acl', 'lpm', 'hash']
+allow_experimental_apis = true
sources = files(
'main.c'
)
diff --git a/examples/l3fwd-vf/Makefile b/examples/l3fwd-vf/Makefile
index 7b186a23c..db7f51f2f 100644
--- a/examples/l3fwd-vf/Makefile
+++ b/examples/l3fwd-vf/Makefile
@@ -51,6 +51,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
CFLAGS += -O3 $(USER_FLAGS)
CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -DALLOW_EXPERIMENTAL_API
# workaround for a gcc bug with noreturn attribute
# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
diff --git a/examples/l3fwd-vf/main.c b/examples/l3fwd-vf/main.c
index 572e74cf5..5bf70f52d 100644
--- a/examples/l3fwd-vf/main.c
+++ b/examples/l3fwd-vf/main.c
@@ -1051,6 +1051,8 @@ main(int argc, char **argv)
if ((enabled_port_mask & (1 << portid)) == 0) {
continue;
}
+ rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN,
+ NULL, 0);
/* Start device */
ret = rte_eth_dev_start(portid);
if (ret < 0)
diff --git a/examples/l3fwd-vf/meson.build b/examples/l3fwd-vf/meson.build
index 226286e74..00f3c38f4 100644
--- a/examples/l3fwd-vf/meson.build
+++ b/examples/l3fwd-vf/meson.build
@@ -7,6 +7,7 @@
# DPDK instance, use 'make'
deps += ['lpm', 'hash']
+allow_experimental_apis = true
sources = files(
'main.c'
)
diff --git a/examples/link_status_interrupt/Makefile b/examples/link_status_interrupt/Makefile
index 97e5a14a8..6ddedd4de 100644
--- a/examples/link_status_interrupt/Makefile
+++ b/examples/link_status_interrupt/Makefile
@@ -51,6 +51,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
CFLAGS += -O3
CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -DALLOW_EXPERIMENTAL_API
include $(RTE_SDK)/mk/rte.extapp.mk
endif
diff --git a/examples/link_status_interrupt/main.c b/examples/link_status_interrupt/main.c
index 9cd4dc7a6..04da4732b 100644
--- a/examples/link_status_interrupt/main.c
+++ b/examples/link_status_interrupt/main.c
@@ -676,6 +676,8 @@ main(int argc, char **argv)
rte_exit(EXIT_FAILURE, "Cannot set error callback for "
"tx buffer on port %u\n", (unsigned) portid);
+ rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN,
+ NULL, 0);
/* Start device */
ret = rte_eth_dev_start(portid);
if (ret < 0)
diff --git a/examples/link_status_interrupt/meson.build b/examples/link_status_interrupt/meson.build
index c34e11e36..2b0a25036 100644
--- a/examples/link_status_interrupt/meson.build
+++ b/examples/link_status_interrupt/meson.build
@@ -6,6 +6,7 @@
# To build this example as a standalone application with an already-installed
# DPDK instance, use 'make'
+allow_experimental_apis = true
sources = files(
'main.c'
)
diff --git a/examples/load_balancer/Makefile b/examples/load_balancer/Makefile
index caae8a107..dcba9194c 100644
--- a/examples/load_balancer/Makefile
+++ b/examples/load_balancer/Makefile
@@ -51,6 +51,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
CFLAGS += -O3 -g
CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -DALLOW_EXPERIMENTAL_API
# workaround for a gcc bug with noreturn attribute
# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
diff --git a/examples/load_balancer/init.c b/examples/load_balancer/init.c
index 3ab7d0211..d49d61474 100644
--- a/examples/load_balancer/init.c
+++ b/examples/load_balancer/init.c
@@ -496,6 +496,8 @@ app_init_nics(void)
}
}
+ rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN,
+ NULL, 0);
/* Start port */
ret = rte_eth_dev_start(port);
if (ret < 0) {
diff --git a/examples/load_balancer/meson.build b/examples/load_balancer/meson.build
index 4f7ac3999..19708974c 100644
--- a/examples/load_balancer/meson.build
+++ b/examples/load_balancer/meson.build
@@ -7,6 +7,7 @@
# DPDK instance, use 'make'
deps += 'lpm'
+allow_experimental_apis = true
sources = files(
'config.c', 'init.c', 'main.c', 'runtime.c'
)
diff --git a/examples/packet_ordering/Makefile b/examples/packet_ordering/Makefile
index 51acaf7eb..9ba3fa9e8 100644
--- a/examples/packet_ordering/Makefile
+++ b/examples/packet_ordering/Makefile
@@ -51,6 +51,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
CFLAGS += -O3
CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -DALLOW_EXPERIMENTAL_API
include $(RTE_SDK)/mk/rte.extapp.mk
endif
diff --git a/examples/packet_ordering/main.c b/examples/packet_ordering/main.c
index 030e92299..59354fad5 100644
--- a/examples/packet_ordering/main.c
+++ b/examples/packet_ordering/main.c
@@ -312,6 +312,7 @@ configure_eth_port(uint16_t port_id)
return ret;
}
+ rte_eth_dev_set_supported_ptypes(port_id, RTE_PTYPE_UNKNOWN, NULL, 0);
ret = rte_eth_dev_start(port_id);
if (ret < 0)
return ret;
diff --git a/examples/packet_ordering/meson.build b/examples/packet_ordering/meson.build
index 6c2fccdcb..a3776946f 100644
--- a/examples/packet_ordering/meson.build
+++ b/examples/packet_ordering/meson.build
@@ -7,6 +7,7 @@
# DPDK instance, use 'make'
deps += 'reorder'
+allow_experimental_apis = true
sources = files(
'main.c'
)
diff --git a/examples/ptpclient/Makefile b/examples/ptpclient/Makefile
index 89e2bacbd..f158d96b9 100644
--- a/examples/ptpclient/Makefile
+++ b/examples/ptpclient/Makefile
@@ -50,6 +50,7 @@ RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.conf
include $(RTE_SDK)/mk/rte.vars.mk
CFLAGS += -O3
+CFLAGS += -DALLOW_EXPERIMENTAL_API
CFLAGS += $(WERROR_FLAGS)
# workaround for a gcc bug with noreturn attribute
diff --git a/examples/ptpclient/meson.build b/examples/ptpclient/meson.build
index fa0cbe93c..d4171a218 100644
--- a/examples/ptpclient/meson.build
+++ b/examples/ptpclient/meson.build
@@ -6,6 +6,7 @@
# To build this example as a standalone application with an already-installed
# DPDK instance, use 'make'
+allow_experimental_apis = true
sources = files(
'ptpclient.c'
)
diff --git a/examples/ptpclient/ptpclient.c b/examples/ptpclient/ptpclient.c
index 31778fd95..e2cf4b136 100644
--- a/examples/ptpclient/ptpclient.c
+++ b/examples/ptpclient/ptpclient.c
@@ -227,6 +227,7 @@ port_init(uint16_t port, struct rte_mempool *mbuf_pool)
return retval;
}
+ rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN, NULL, 0);
/* Start the Ethernet port. */
retval = rte_eth_dev_start(port);
if (retval < 0)
diff --git a/examples/qos_meter/Makefile b/examples/qos_meter/Makefile
index e5217cf7c..a1533d08f 100644
--- a/examples/qos_meter/Makefile
+++ b/examples/qos_meter/Makefile
@@ -52,6 +52,7 @@ RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.conf
include $(RTE_SDK)/mk/rte.vars.mk
CFLAGS += -O3
+CFLAGS += -DALLOW_EXPERIMENTAL_API
CFLAGS += $(WERROR_FLAGS)
# workaround for a gcc bug with noreturn attribute
diff --git a/examples/qos_meter/main.c b/examples/qos_meter/main.c
index da7afe8be..ade8e49c3 100644
--- a/examples/qos_meter/main.c
+++ b/examples/qos_meter/main.c
@@ -419,10 +419,12 @@ main(int argc, char **argv)
rte_eth_tx_buffer_init(tx_buffer, PKT_TX_BURST_MAX);
+ rte_eth_dev_set_supported_ptypes(port_rx, RTE_PTYPE_UNKNOWN, NULL, 0);
ret = rte_eth_dev_start(port_rx);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Port %d start error (%d)\n", port_rx, ret);
+ rte_eth_dev_set_supported_ptypes(port_tx, RTE_PTYPE_UNKNOWN, NULL, 0);
ret = rte_eth_dev_start(port_tx);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Port %d start error (%d)\n", port_tx, ret);
diff --git a/examples/qos_meter/meson.build b/examples/qos_meter/meson.build
index ef7779f2f..10cd4bc79 100644
--- a/examples/qos_meter/meson.build
+++ b/examples/qos_meter/meson.build
@@ -7,6 +7,7 @@
# DPDK instance, use 'make'
deps += 'meter'
+allow_experimental_apis = true
sources = files(
'main.c', 'rte_policer.c'
)
diff --git a/examples/qos_sched/Makefile b/examples/qos_sched/Makefile
index ce2d25371..7d3d3019f 100644
--- a/examples/qos_sched/Makefile
+++ b/examples/qos_sched/Makefile
@@ -58,6 +58,7 @@ else
CFLAGS += -O3
CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -DALLOW_EXPERIMENTAL_API
include $(RTE_SDK)/mk/rte.extapp.mk
diff --git a/examples/qos_sched/init.c b/examples/qos_sched/init.c
index b05206d5a..d165b3dd4 100644
--- a/examples/qos_sched/init.c
+++ b/examples/qos_sched/init.c
@@ -138,6 +138,7 @@ app_init_port(uint16_t portid, struct rte_mempool *mp)
"rte_eth_tx_queue_setup: err=%d, port=%u queue=%d\n",
ret, portid, 0);
+ rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN, NULL, 0);
/* Start device */
ret = rte_eth_dev_start(portid);
if (ret < 0)
diff --git a/examples/qos_sched/meson.build b/examples/qos_sched/meson.build
index 289b81ce8..5101652af 100644
--- a/examples/qos_sched/meson.build
+++ b/examples/qos_sched/meson.build
@@ -7,6 +7,7 @@
# DPDK instance, use 'make'
deps += ['sched', 'cfgfile']
+allow_experimental_apis = true
sources = files(
'app_thread.c', 'args.c', 'cfg_file.c', 'cmdline.c',
'init.c', 'main.c', 'stats.c'
diff --git a/examples/quota_watermark/qw/Makefile b/examples/quota_watermark/qw/Makefile
index 3f10f01c3..e06f4482b 100644
--- a/examples/quota_watermark/qw/Makefile
+++ b/examples/quota_watermark/qw/Makefile
@@ -18,5 +18,6 @@ SRCS-y := args.c init.c main.c
CFLAGS += -O3 -DQW_SOFTWARE_FC
CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -DALLOW_EXPERIMENTAL_API
include $(RTE_SDK)/mk/rte.extapp.mk
diff --git a/examples/quota_watermark/qw/init.c b/examples/quota_watermark/qw/init.c
index 5a0f64f45..4753eb900 100644
--- a/examples/quota_watermark/qw/init.c
+++ b/examples/quota_watermark/qw/init.c
@@ -96,6 +96,7 @@ void configure_eth_port(uint16_t port_id)
"Failed to setup hardware flow control on port %u (error %d)\n",
(unsigned int) port_id, ret);
+ rte_eth_dev_set_supported_ptypes(port_id, RTE_PTYPE_UNKNOWN, NULL, 0);
/* Start the port */
ret = rte_eth_dev_start(port_id);
if (ret < 0)
diff --git a/examples/rxtx_callbacks/main.c b/examples/rxtx_callbacks/main.c
index dbcd9f4fc..8949f0d93 100644
--- a/examples/rxtx_callbacks/main.c
+++ b/examples/rxtx_callbacks/main.c
@@ -152,6 +152,7 @@ port_init(uint16_t port, struct rte_mempool *mbuf_pool)
return retval;
}
+ rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN, NULL, 0);
retval = rte_eth_dev_start(port);
if (retval < 0)
return retval;
diff --git a/examples/server_node_efd/server/Makefile b/examples/server_node_efd/server/Makefile
index 4837bd3ea..acbd12ae2 100644
--- a/examples/server_node_efd/server/Makefile
+++ b/examples/server_node_efd/server/Makefile
@@ -25,5 +25,6 @@ INC := $(sort $(wildcard *.h))
CFLAGS += $(WERROR_FLAGS) -O3
CFLAGS += -I$(SRCDIR)/../shared
+CFLAGS += -DALLOW_EXPERIMENTAL_API
include $(RTE_SDK)/mk/rte.extapp.mk
diff --git a/examples/server_node_efd/server/init.c b/examples/server_node_efd/server/init.c
index af5a18e28..bbea0c4c9 100644
--- a/examples/server_node_efd/server/init.c
+++ b/examples/server_node_efd/server/init.c
@@ -149,6 +149,7 @@ init_port(uint16_t port_num)
rte_eth_promiscuous_enable(port_num);
+ rte_eth_dev_set_supported_ptypes(port_num, RTE_PTYPE_UNKNOWN, NULL, 0);
retval = rte_eth_dev_start(port_num);
if (retval < 0)
return retval;
diff --git a/examples/skeleton/Makefile b/examples/skeleton/Makefile
index c5ac26029..0037d6b25 100644
--- a/examples/skeleton/Makefile
+++ b/examples/skeleton/Makefile
@@ -50,6 +50,7 @@ RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.conf
include $(RTE_SDK)/mk/rte.vars.mk
CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -DALLOW_EXPERIMENTAL_API
# workaround for a gcc bug with noreturn attribute
# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
diff --git a/examples/skeleton/basicfwd.c b/examples/skeleton/basicfwd.c
index a8a8e98f0..423ce05f8 100644
--- a/examples/skeleton/basicfwd.c
+++ b/examples/skeleton/basicfwd.c
@@ -76,6 +76,7 @@ port_init(uint16_t port, struct rte_mempool *mbuf_pool)
return retval;
}
+ rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN, NULL, 0);
/* Start the Ethernet port. */
retval = rte_eth_dev_start(port);
if (retval < 0)
diff --git a/examples/skeleton/meson.build b/examples/skeleton/meson.build
index 9bb9ec329..ef46b187e 100644
--- a/examples/skeleton/meson.build
+++ b/examples/skeleton/meson.build
@@ -6,6 +6,7 @@
# To build this example as a standalone application with an already-installed
# DPDK instance, use 'make'
+allow_experimental_apis = true
sources = files(
'basicfwd.c'
)
diff --git a/examples/tep_termination/Makefile b/examples/tep_termination/Makefile
index 31165bd92..586838676 100644
--- a/examples/tep_termination/Makefile
+++ b/examples/tep_termination/Makefile
@@ -61,6 +61,7 @@ endif
CFLAGS += -O3
CFLAGS += $(WERROR_FLAGS)
CFLAGS += -Wno-deprecated-declarations
+CFLAGS += -DALLOW_EXPERIMENTAL_API
include $(RTE_SDK)/mk/rte.extapp.mk
endif
diff --git a/examples/tep_termination/meson.build b/examples/tep_termination/meson.build
index f65d68980..f40b1c0b8 100644
--- a/examples/tep_termination/meson.build
+++ b/examples/tep_termination/meson.build
@@ -11,6 +11,7 @@ if not is_linux
endif
deps += ['hash', 'vhost']
cflags += '-Wno-deprecated-declarations'
+allow_experimental_apis = true
sources = files(
'main.c', 'vxlan.c', 'vxlan_setup.c'
)
diff --git a/examples/tep_termination/vxlan_setup.c b/examples/tep_termination/vxlan_setup.c
index 9a0880002..219d3e215 100644
--- a/examples/tep_termination/vxlan_setup.c
+++ b/examples/tep_termination/vxlan_setup.c
@@ -167,6 +167,7 @@ vxlan_port_init(uint16_t port, struct rte_mempool *mbuf_pool)
return retval;
}
+ rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN, NULL, 0);
/* Start the device. */
retval = rte_eth_dev_start(port);
if (retval < 0)
diff --git a/examples/vhost/Makefile b/examples/vhost/Makefile
index f84b7f017..7722e81c7 100644
--- a/examples/vhost/Makefile
+++ b/examples/vhost/Makefile
@@ -62,6 +62,7 @@ else
CFLAGS += -DALLOW_EXPERIMENTAL_API
CFLAGS += -O2 -D_FILE_OFFSET_BITS=64
CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -DALLOW_EXPERIMENTAL_API
include $(RTE_SDK)/mk/rte.extapp.mk
diff --git a/examples/vhost/main.c b/examples/vhost/main.c
index 0961db080..3d9f125e5 100644
--- a/examples/vhost/main.c
+++ b/examples/vhost/main.c
@@ -321,6 +321,7 @@ port_init(uint16_t port)
}
}
+ rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN, NULL, 0);
/* Start the device. */
retval = rte_eth_dev_start(port);
if (retval < 0) {
diff --git a/examples/vm_power_manager/Makefile b/examples/vm_power_manager/Makefile
index 2fdb991d7..65c2ad179 100644
--- a/examples/vm_power_manager/Makefile
+++ b/examples/vm_power_manager/Makefile
@@ -28,6 +28,7 @@ endif
CFLAGS += -O3 -I$(RTE_SDK)/lib/librte_power/
CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -DALLOW_EXPERIMENTAL_API
LDLIBS += -lvirt
diff --git a/examples/vm_power_manager/main.c b/examples/vm_power_manager/main.c
index 54c704610..4cb4ccecf 100644
--- a/examples/vm_power_manager/main.c
+++ b/examples/vm_power_manager/main.c
@@ -99,6 +99,7 @@ port_init(uint16_t port, struct rte_mempool *mbuf_pool)
return retval;
}
+ rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN, NULL, 0);
/* Start the Ethernet port. */
retval = rte_eth_dev_start(port);
if (retval < 0)
diff --git a/examples/vm_power_manager/meson.build b/examples/vm_power_manager/meson.build
index 20a4a05b3..54e2b584f 100644
--- a/examples/vm_power_manager/meson.build
+++ b/examples/vm_power_manager/meson.build
@@ -25,6 +25,7 @@ if dpdk_conf.has('RTE_LIBRTE_IXGBE_PMD')
deps += ['pmd_ixgbe']
endif
+allow_experimental_apis = true
sources = files(
'channel_manager.c', 'channel_monitor.c', 'main.c', 'parse.c', 'power_manager.c', 'vm_power_cli.c'
)
diff --git a/examples/vmdq/Makefile b/examples/vmdq/Makefile
index 1557ee86b..2168747cc 100644
--- a/examples/vmdq/Makefile
+++ b/examples/vmdq/Makefile
@@ -50,6 +50,7 @@ RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.conf
include $(RTE_SDK)/mk/rte.vars.mk
CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -DALLOW_EXPERIMENTAL_API
EXTRA_CFLAGS += -O3
diff --git a/examples/vmdq/main.c b/examples/vmdq/main.c
index 7281ffd7f..65431f95e 100644
--- a/examples/vmdq/main.c
+++ b/examples/vmdq/main.c
@@ -258,6 +258,7 @@ port_init(uint16_t port, struct rte_mempool *mbuf_pool)
}
}
+ rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN, NULL, 0);
retval = rte_eth_dev_start(port);
if (retval < 0) {
printf("port %d start failed\n", port);
diff --git a/examples/vmdq/meson.build b/examples/vmdq/meson.build
index c34e11e36..2b0a25036 100644
--- a/examples/vmdq/meson.build
+++ b/examples/vmdq/meson.build
@@ -6,6 +6,7 @@
# To build this example as a standalone application with an already-installed
# DPDK instance, use 'make'
+allow_experimental_apis = true
sources = files(
'main.c'
)
diff --git a/examples/vmdq_dcb/Makefile b/examples/vmdq_dcb/Makefile
index 391096cfb..ea1574d91 100644
--- a/examples/vmdq_dcb/Makefile
+++ b/examples/vmdq_dcb/Makefile
@@ -50,6 +50,7 @@ RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.conf
include $(RTE_SDK)/mk/rte.vars.mk
CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -DALLOW_EXPERIMENTAL_API
# workaround for a gcc bug with noreturn attribute
# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
diff --git a/examples/vmdq_dcb/main.c b/examples/vmdq_dcb/main.c
index 389000327..44fe63482 100644
--- a/examples/vmdq_dcb/main.c
+++ b/examples/vmdq_dcb/main.c
@@ -313,6 +313,7 @@ port_init(uint16_t port, struct rte_mempool *mbuf_pool)
}
}
+ rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN, NULL, 0);
retval = rte_eth_dev_start(port);
if (retval < 0) {
printf("port %d start failed\n", port);
diff --git a/examples/vmdq_dcb/meson.build b/examples/vmdq_dcb/meson.build
index c34e11e36..2b0a25036 100644
--- a/examples/vmdq_dcb/meson.build
+++ b/examples/vmdq_dcb/meson.build
@@ -6,6 +6,7 @@
# To build this example as a standalone application with an already-installed
# DPDK instance, use 'make'
+allow_experimental_apis = true
sources = files(
'main.c'
)
--
2.17.1
next prev parent reply other threads:[~2019-10-09 15:36 UTC|newest]
Thread overview: 245+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-21 20:47 [dpdk-dev] [PATCH v2 0/7] ethdev: add new Rx offload flags pbhagavatula
2019-08-21 20:47 ` [dpdk-dev] [PATCH v2 1/7] ethdev: add set ptype function pbhagavatula
2019-08-23 9:44 ` Andrew Rybchenko
2019-10-01 14:54 ` Jerin Jacob
2019-08-21 20:47 ` [dpdk-dev] [PATCH v2 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-08-23 1:19 ` Stephen Hemminger
2019-08-27 13:44 ` Andrew Rybchenko
2019-08-23 9:49 ` Andrew Rybchenko
2019-08-21 20:47 ` [dpdk-dev] [PATCH v2 3/7] ethdev: add flow action type " pbhagavatula
2019-08-23 10:00 ` Andrew Rybchenko
2019-08-21 20:47 ` [dpdk-dev] [PATCH v2 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-01 14:43 ` Jerin Jacob
2019-10-01 15:40 ` Ajit Khaparde
2019-08-21 20:47 ` [dpdk-dev] [PATCH v2 5/7] drivers/net: update Rx flow flag and mark capabilities pbhagavatula
2019-08-23 10:03 ` Andrew Rybchenko
2019-10-01 14:48 ` Jerin Jacob
2019-08-21 20:47 ` [dpdk-dev] [PATCH v2 6/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-08-21 20:47 ` [dpdk-dev] [PATCH v2 7/7] examples: disable Rx packet type parsing pbhagavatula
2019-08-23 10:10 ` Andrew Rybchenko
2019-09-29 21:19 ` [dpdk-dev] [PATCH v3 0/7] ethdev: add new Rx offload flags pbhagavatula
2019-09-29 21:19 ` [dpdk-dev] [PATCH v3 1/7] ethdev: add set ptype function pbhagavatula
2019-09-29 21:19 ` [dpdk-dev] [PATCH v3 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-09-29 21:19 ` [dpdk-dev] [PATCH v3 3/7] ethdev: add flow action type " pbhagavatula
2019-09-29 21:19 ` [dpdk-dev] [PATCH v3 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-09-29 21:19 ` [dpdk-dev] [PATCH v3 5/7] drivers/net: update Rx flow flag and mark capabilities pbhagavatula
2019-09-29 21:19 ` [dpdk-dev] [PATCH v3 6/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-09-29 21:19 ` [dpdk-dev] [PATCH v3 7/7] examples: disable Rx packet type parsing pbhagavatula
2019-09-30 17:47 ` Aaron Conole
2019-10-01 5:02 ` Pavan Nikhilesh Bhagavatula
2019-10-01 6:34 ` [dpdk-dev] [PATCH v4 0/7] ethdev: add new Rx offload flags pbhagavatula
2019-10-01 6:34 ` [dpdk-dev] [PATCH v4 1/7] ethdev: add set ptype function pbhagavatula
2019-10-01 7:04 ` Andrew Rybchenko
2019-10-01 6:34 ` [dpdk-dev] [PATCH v4 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-10-01 6:34 ` [dpdk-dev] [PATCH v4 3/7] ethdev: add flow action type " pbhagavatula
2019-10-01 6:34 ` [dpdk-dev] [PATCH v4 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-01 6:34 ` [dpdk-dev] [PATCH v4 5/7] drivers/net: update Rx flow flag and mark capabilities pbhagavatula
2019-10-01 6:34 ` [dpdk-dev] [PATCH v4 6/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-10-01 6:34 ` [dpdk-dev] [PATCH v4 7/7] examples: disable Rx packet type parsing pbhagavatula
2019-10-01 6:41 ` [dpdk-dev] [PATCH v5 0/7] ethdev: add new Rx offload flags pbhagavatula
2019-10-01 6:41 ` [dpdk-dev] [PATCH v5 1/7] ethdev: add set ptype function pbhagavatula
2019-10-01 6:41 ` [dpdk-dev] [PATCH v5 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-10-01 6:41 ` [dpdk-dev] [PATCH v5 3/7] ethdev: add flow action type " pbhagavatula
2019-10-01 6:41 ` [dpdk-dev] [PATCH v5 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-01 7:10 ` Andrew Rybchenko
2019-10-01 11:50 ` Hemant Agrawal
2019-10-01 6:41 ` [dpdk-dev] [PATCH v5 5/7] drivers/net: update Rx flow flag and mark capabilities pbhagavatula
2019-10-01 7:11 ` Andrew Rybchenko
2019-10-01 6:41 ` [dpdk-dev] [PATCH v5 6/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-10-01 6:41 ` [dpdk-dev] [PATCH v5 7/7] examples: disable Rx packet type parsing pbhagavatula
2019-10-01 18:52 ` [dpdk-dev] [PATCH v6 0/7] ethdev: add new Rx offload flags pbhagavatula
2019-10-01 18:52 ` [dpdk-dev] [PATCH v6 1/7] ethdev: add set ptype function pbhagavatula
2019-10-01 18:52 ` [dpdk-dev] [PATCH v6 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-10-01 18:52 ` [dpdk-dev] [PATCH v6 3/7] ethdev: add flow action type " pbhagavatula
2019-10-01 18:52 ` [dpdk-dev] [PATCH v6 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-01 18:52 ` [dpdk-dev] [PATCH v6 5/7] drivers/net: update Rx flow flag and mark capabilities pbhagavatula
2019-10-01 18:52 ` [dpdk-dev] [PATCH v6 6/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-10-01 18:52 ` [dpdk-dev] [PATCH v6 7/7] examples: disable Rx packet type parsing pbhagavatula
2019-10-02 3:47 ` [dpdk-dev] [PATCH v5 0/7] ethdev: add new Rx offload flags pbhagavatula
2019-10-02 3:47 ` [dpdk-dev] [PATCH v7 1/7] ethdev: add set ptype function pbhagavatula
2019-10-02 13:37 ` Andrew Rybchenko
2019-10-02 13:41 ` Andrew Rybchenko
2019-10-02 3:47 ` [dpdk-dev] [PATCH v7 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-10-02 3:47 ` [dpdk-dev] [PATCH v7 3/7] ethdev: add flow action type " pbhagavatula
2019-10-02 3:47 ` [dpdk-dev] [PATCH v7 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-02 3:47 ` [dpdk-dev] [PATCH v7 5/7] drivers/net: update Rx flow flag and mark capabilities pbhagavatula
2019-10-02 9:52 ` Jerin Jacob
2019-10-02 3:47 ` [dpdk-dev] [PATCH v7 6/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-10-02 3:47 ` [dpdk-dev] [PATCH v7 7/7] examples: disable Rx packet type parsing pbhagavatula
2019-10-02 21:36 ` [dpdk-dev] [PATCH v8 0/7] ethdev: add new Rx offload flags pbhagavatula
2019-10-02 21:36 ` [dpdk-dev] [PATCH v8 1/7] ethdev: add set ptype function pbhagavatula
2019-10-03 7:40 ` Andrew Rybchenko
2019-10-03 17:15 ` Pavan Nikhilesh Bhagavatula
2019-10-02 21:36 ` [dpdk-dev] [PATCH v8 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-10-02 21:36 ` [dpdk-dev] [PATCH v8 3/7] ethdev: add flow action type " pbhagavatula
2019-10-02 21:36 ` [dpdk-dev] [PATCH v8 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-02 21:36 ` [dpdk-dev] [PATCH v8 5/7] drivers/net: update Rx flow flag and mark capabilities pbhagavatula
2019-10-02 21:36 ` [dpdk-dev] [PATCH v8 6/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-10-02 21:36 ` [dpdk-dev] [PATCH v8 7/7] examples: disable Rx packet type parsing pbhagavatula
2019-10-07 6:51 ` [dpdk-dev] [PATCH v9 0/7] ethdev: add new Rx offload flags pbhagavatula
2019-10-07 6:51 ` [dpdk-dev] [PATCH v9 1/7] ethdev: add set ptype function pbhagavatula
2019-10-08 14:48 ` Andrew Rybchenko
2019-10-07 6:51 ` [dpdk-dev] [PATCH v9 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-10-07 6:51 ` [dpdk-dev] [PATCH v9 3/7] ethdev: add flow action type " pbhagavatula
2019-10-07 6:51 ` [dpdk-dev] [PATCH v9 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-07 6:51 ` [dpdk-dev] [PATCH v9 5/7] drivers/net: update Rx flow flag and mark capabilities pbhagavatula
2019-10-07 6:51 ` [dpdk-dev] [PATCH v9 6/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-10-07 6:51 ` [dpdk-dev] [PATCH v9 7/7] examples: disable Rx packet type parsing pbhagavatula
2019-10-09 15:33 ` [dpdk-dev] [PATCH v10 0/7] ethdev: add new Rx offload flags pbhagavatula
2019-10-09 15:33 ` [dpdk-dev] [PATCH v10 1/7] ethdev: add set ptype function pbhagavatula
2019-10-10 8:46 ` Andrew Rybchenko
2019-10-09 15:33 ` [dpdk-dev] [PATCH v10 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-10-09 15:33 ` [dpdk-dev] [PATCH v10 3/7] ethdev: add flow action type " pbhagavatula
2019-10-09 15:33 ` [dpdk-dev] [PATCH v10 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-09 15:33 ` [dpdk-dev] [PATCH v10 5/7] drivers/net: update Rx flow flag and mark capabilities pbhagavatula
2019-10-09 15:33 ` [dpdk-dev] [PATCH v10 6/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-10-09 15:33 ` pbhagavatula [this message]
2019-10-10 10:51 ` [dpdk-dev] [PATCH v11 0/7] ethdev: add new Rx offload flags pbhagavatula
2019-10-10 10:51 ` [dpdk-dev] [PATCH v11 1/7] ethdev: add set ptype function pbhagavatula
2019-10-10 10:51 ` [dpdk-dev] [PATCH v11 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-10-10 10:51 ` [dpdk-dev] [PATCH v11 3/7] ethdev: add flow action type " pbhagavatula
2019-10-10 10:51 ` [dpdk-dev] [PATCH v11 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-10 10:51 ` [dpdk-dev] [PATCH v11 5/7] drivers/net: update Rx flow flag and mark capabilities pbhagavatula
2019-10-10 10:51 ` [dpdk-dev] [PATCH v11 6/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-10-10 10:51 ` [dpdk-dev] [PATCH v11 7/7] examples: disable Rx packet type parsing pbhagavatula
2019-10-17 12:02 ` [dpdk-dev] [PATCH v12 0/7] ethdev: add new Rx offload flags pbhagavatula
2019-10-17 12:02 ` [dpdk-dev] [PATCH v12 1/7] ethdev: add set ptype function pbhagavatula
2019-10-17 12:02 ` [dpdk-dev] [PATCH v12 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-10-17 12:02 ` [dpdk-dev] [PATCH v12 3/7] ethdev: add flow action type " pbhagavatula
2019-10-17 12:02 ` [dpdk-dev] [PATCH v12 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-17 12:02 ` [dpdk-dev] [PATCH v12 5/7] drivers/net: update Rx flow flag and mark capabilities pbhagavatula
2019-10-17 12:02 ` [dpdk-dev] [PATCH v12 6/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-10-17 12:02 ` [dpdk-dev] [PATCH v12 7/7] examples: disable Rx packet type parsing pbhagavatula
2019-10-17 17:43 ` [dpdk-dev] [PATCH v12 0/7] ethdev: add new Rx offload flags Ferruh Yigit
2019-10-18 7:32 ` Andrew Rybchenko
2019-10-18 9:42 ` Ferruh Yigit
2019-10-18 10:31 ` Andrew Rybchenko
2019-10-21 15:06 ` Ferruh Yigit
2019-10-25 14:33 ` [dpdk-dev] [PATCH v13 0/6] " pbhagavatula
2019-10-25 14:33 ` [dpdk-dev] [PATCH v13 1/6] ethdev: add set ptype function pbhagavatula
2019-10-25 14:33 ` [dpdk-dev] [PATCH v13 2/6] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-10-25 14:33 ` [dpdk-dev] [PATCH v13 3/6] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-25 14:56 ` Andrew Rybchenko
2019-10-25 14:33 ` [dpdk-dev] [PATCH v13 4/6] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-10-25 14:33 ` [dpdk-dev] [PATCH v13 5/6] examples/l2fwd: disable ptype parsing pbhagavatula
2019-10-25 14:33 ` [dpdk-dev] [PATCH v13 6/6] app/testpmd: add command to set supported ptype mask pbhagavatula
2019-10-29 5:03 ` [dpdk-dev] [PATCH v14 0/6] ethdev: add new Rx offload flags pbhagavatula
2019-10-29 5:03 ` [dpdk-dev] [PATCH v14 1/7] ethdev: add set ptype function pbhagavatula
2019-10-29 5:03 ` [dpdk-dev] [PATCH v14 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-10-29 7:13 ` Andrew Rybchenko
2019-10-29 5:03 ` [dpdk-dev] [PATCH v14 3/7] ethdev: log offloads that can't be disabled by PMD pbhagavatula
2019-10-29 7:05 ` Andrew Rybchenko
2019-10-29 8:33 ` Pavan Nikhilesh Bhagavatula
2019-10-29 8:42 ` Andrew Rybchenko
2019-10-29 5:03 ` [dpdk-dev] [PATCH v14 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-29 7:21 ` Andrew Rybchenko
2019-10-29 5:03 ` [dpdk-dev] [PATCH v14 5/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-10-29 5:03 ` [dpdk-dev] [PATCH v14 6/7] examples/l2fwd: disable ptype parsing pbhagavatula
2019-10-29 5:03 ` [dpdk-dev] [PATCH v14 7/7] app/testpmd: add command to set supported ptype mask pbhagavatula
2019-10-29 15:37 ` [dpdk-dev] [PATCH v15 0/7] ethdev: add new Rx offload flags pbhagavatula
2019-10-29 15:37 ` [dpdk-dev] [PATCH v15 1/7] ethdev: add set ptype function pbhagavatula
2019-10-31 13:39 ` Thomas Monjalon
2019-10-29 15:37 ` [dpdk-dev] [PATCH v15 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-10-31 13:43 ` Thomas Monjalon
2019-10-29 15:37 ` [dpdk-dev] [PATCH v15 3/7] ethdev: add validation to offloads set by PMD pbhagavatula
2019-10-29 16:53 ` Andrew Rybchenko
2019-10-29 17:25 ` [dpdk-dev] [EXT] " Pavan Nikhilesh Bhagavatula
2019-10-31 13:45 ` [dpdk-dev] " Thomas Monjalon
2019-10-31 13:58 ` Thomas Monjalon
2019-10-31 16:44 ` [dpdk-dev] [EXT] " Pavan Nikhilesh Bhagavatula
2019-11-01 22:50 ` Thomas Monjalon
2019-10-31 15:13 ` [dpdk-dev] " Matan Azrad
2019-10-31 15:18 ` Pavan Nikhilesh Bhagavatula
2019-10-31 15:50 ` Matan Azrad
2019-10-31 16:33 ` Pavan Nikhilesh Bhagavatula
2019-11-01 11:04 ` Andrew Rybchenko
2019-11-03 6:57 ` Matan Azrad
2019-11-03 12:12 ` Andrew Rybchenko
2019-11-03 15:16 ` Matan Azrad
2019-11-05 12:48 ` Andrew Rybchenko
2019-11-05 14:05 ` Matan Azrad
2019-11-05 14:37 ` Andrew Rybchenko
2019-11-06 6:58 ` Matan Azrad
2019-11-06 8:12 ` Andrew Rybchenko
2019-11-07 6:56 ` Matan Azrad
2019-11-08 10:12 ` Andrew Rybchenko
2019-11-08 10:29 ` Matan Azrad
2019-11-08 11:24 ` Andrew Rybchenko
2019-11-08 11:48 ` Matan Azrad
2019-11-08 12:09 ` Andrew Rybchenko
2019-11-08 12:59 ` Thomas Monjalon
2019-10-29 15:37 ` [dpdk-dev] [PATCH v15 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-31 14:03 ` Thomas Monjalon
2019-10-31 16:51 ` Pavan Nikhilesh Bhagavatula
2019-11-01 11:11 ` Andrew Rybchenko
2019-11-01 22:22 ` Thomas Monjalon
2019-11-01 17:49 ` Liron Himi
2019-11-03 12:06 ` Andrew Rybchenko
2019-11-03 14:06 ` [dpdk-dev] [EXT] " Liron Himi
2019-10-29 15:37 ` [dpdk-dev] [PATCH v15 5/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-10-31 14:05 ` Thomas Monjalon
2019-10-29 15:37 ` [dpdk-dev] [PATCH v15 6/7] examples/l2fwd: disable ptype parsing pbhagavatula
2019-10-29 15:37 ` [dpdk-dev] [PATCH v15 7/7] app/testpmd: add command to set supported ptype mask pbhagavatula
2019-10-31 10:33 ` Iremonger, Bernard
2019-11-06 18:13 ` Pavan Nikhilesh Bhagavatula
2019-11-06 19:17 ` [dpdk-dev] [PATCH v16 0/8] ethdev: add new Rx offload flags pbhagavatula
2019-11-06 19:17 ` [dpdk-dev] [PATCH v16 1/8] ethdev: add set ptype function pbhagavatula
2019-11-07 18:28 ` Ferruh Yigit
2019-11-08 9:05 ` Andrew Rybchenko
2019-11-08 9:52 ` Ferruh Yigit
2019-11-08 10:24 ` Andrew Rybchenko
2019-11-08 11:05 ` Ferruh Yigit
2019-11-08 11:40 ` Andrew Rybchenko
2019-11-06 19:17 ` [dpdk-dev] [PATCH v16 2/8] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-11-07 17:24 ` Ferruh Yigit
2019-11-10 14:43 ` Pavan Nikhilesh Bhagavatula
2019-11-06 19:17 ` [dpdk-dev] [PATCH v16 3/8] ethdev: add validation to offloads set by PMD pbhagavatula
2019-11-07 16:51 ` Ferruh Yigit
2019-11-06 19:17 ` [dpdk-dev] [PATCH v16 4/8] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-11-07 16:48 ` Ferruh Yigit
2019-11-07 17:22 ` Ferruh Yigit
2019-11-08 8:48 ` Andrew Rybchenko
2019-11-14 14:01 ` Ferruh Yigit
2019-11-06 19:17 ` [dpdk-dev] [PATCH v16 5/8] examples/eventdev_pipeline: split port init sequence pbhagavatula
2019-11-06 19:18 ` [dpdk-dev] [PATCH v16 6/8] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-11-06 19:18 ` [dpdk-dev] [PATCH v16 7/8] examples/l2fwd: disable ptype parsing pbhagavatula
2019-11-07 17:59 ` Ferruh Yigit
2019-11-07 18:30 ` Ferruh Yigit
2019-11-06 19:18 ` [dpdk-dev] [PATCH v16 8/8] app/testpmd: add command to set supported ptype mask pbhagavatula
2019-11-07 11:57 ` Iremonger, Bernard
2019-11-07 12:27 ` Iremonger, Bernard
2019-11-07 14:36 ` Pavan Nikhilesh Bhagavatula
2019-11-07 15:00 ` Iremonger, Bernard
2019-11-07 18:40 ` Ferruh Yigit
2019-11-07 18:55 ` Jerin Jacob
2019-11-07 19:40 ` Ferruh Yigit
2019-11-08 4:13 ` Jerin Jacob
2019-11-08 13:54 ` Ananyev, Konstantin
2019-11-08 15:01 ` Jerin Jacob
2019-11-11 4:56 ` [dpdk-dev] [EXT] " Pavan Nikhilesh Bhagavatula
2019-11-11 5:02 ` Jerin Jacob
2019-11-11 10:44 ` Ferruh Yigit
2019-11-11 13:19 ` [dpdk-dev] [PATCH v17 00/10] ethdev: add new Rx offload flags pbhagavatula
2019-11-11 13:19 ` [dpdk-dev] [PATCH v17 01/10] ethdev: add set ptype function pbhagavatula
2019-11-11 13:19 ` [dpdk-dev] [PATCH v17 02/10] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-11-13 18:04 ` Ferruh Yigit
2019-11-11 13:19 ` [dpdk-dev] [PATCH v17 03/10] ethdev: add validation to offloads set by PMD pbhagavatula
2019-11-13 18:10 ` Ferruh Yigit
2019-11-11 13:19 ` [dpdk-dev] [PATCH v17 04/10] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-11-11 15:05 ` Ferruh Yigit
2019-11-11 15:10 ` Pavan Nikhilesh Bhagavatula
2019-11-13 18:02 ` Ferruh Yigit
2019-11-14 12:52 ` Ferruh Yigit
2019-11-14 12:57 ` Jerin Jacob
2019-11-14 13:24 ` Andrew Rybchenko
2019-11-14 13:59 ` Ferruh Yigit
2019-11-14 14:14 ` Ferruh Yigit
2019-11-11 13:19 ` [dpdk-dev] [PATCH v17 05/10] examples/eventdev_pipeline: split port init sequence pbhagavatula
2019-11-11 13:19 ` [dpdk-dev] [PATCH v17 06/10] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-11-11 13:19 ` [dpdk-dev] [PATCH v17 07/10] examples/l2fwd: disable ptype parsing pbhagavatula
2019-11-11 13:19 ` [dpdk-dev] [PATCH v17 08/10] app/testpmd: add command to set supported ptype mask pbhagavatula
2019-11-11 14:51 ` Ferruh Yigit
2019-11-11 13:19 ` [dpdk-dev] [PATCH v17 09/10] app/testpmd: disable packet type parsing by default pbhagavatula
2019-11-11 14:54 ` Ferruh Yigit
2019-11-11 13:19 ` [dpdk-dev] [PATCH v17 10/10] app/testpmd: add RSS hash offload to port Rx offload cmd pbhagavatula
2019-11-11 15:45 ` [dpdk-dev] [PATCH v17 00/10] ethdev: add new Rx offload flags Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191009153357.926-8-pbhagavatula@marvell.com \
--to=pbhagavatula@marvell.com \
--cc=akhil.goyal@nxp.com \
--cc=arybchenko@solarflare.com \
--cc=bernard.iremonger@intel.com \
--cc=bruce.richardson@intel.com \
--cc=byron.marohn@intel.com \
--cc=chas3@att.com \
--cc=cristian.dumitrescu@intel.com \
--cc=david.hunt@intel.com \
--cc=declan.doherty@intel.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=harry.van.haaren@intel.com \
--cc=jasvinder.singh@intel.com \
--cc=jerinj@marvell.com \
--cc=john.mcnamara@intel.com \
--cc=konstantin.ananyev@intel.com \
--cc=marko.kovacevic@intel.com \
--cc=maxime.coquelin@redhat.com \
--cc=nicolas.chautru@intel.com \
--cc=orika@mellanox.com \
--cc=radu.nicolau@intel.com \
--cc=reshma.pattan@intel.com \
--cc=tiwei.bie@intel.com \
--cc=tomasz.kantecki@intel.com \
--cc=xiaoyun.li@intel.com \
--cc=yipeng1.wang@intel.com \
--cc=zhihong.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.