From: Aaron Conole <aconole@redhat.com>
To: <pbhagavatula@marvell.com>
Cc: <arybchenko@solarflare.com>, <jerinj@marvell.com>,
Nicolas Chautru <nicolas.chautru@intel.com>,
Chas Williams <chas3@att.com>,
David Hunt <david.hunt@intel.com>,
Harry van Haaren <harry.van.haaren@intel.com>,
"Marko Kovacevic" <marko.kovacevic@intel.com>,
Ori Kam <orika@mellanox.com>,
"Bruce Richardson" <bruce.richardson@intel.com>,
Radu Nicolau <radu.nicolau@intel.com>,
Akhil Goyal <akhil.goyal@nxp.com>,
Tomasz Kantecki <tomasz.kantecki@intel.com>,
Bernard Iremonger <bernard.iremonger@intel.com>,
Cristian Dumitrescu <cristian.dumitrescu@intel.com>,
Konstantin Ananyev <konstantin.ananyev@intel.com>,
Ferruh Yigit <ferruh.yigit@intel.com>,
"Declan Doherty" <declan.doherty@intel.com>,
Reshma Pattan <reshma.pattan@intel.com>,
John McNamara <john.mcnamara@intel.com>,
Xiaoyun Li <xiaoyun.li@intel.com>,
Jasvinder Singh <jasvinder.singh@intel.com>,
Byron Marohn <byron.marohn@intel.com>,
Yipeng Wang <yipeng1.wang@intel.com>,
"Maxime Coquelin" <maxime.coquelin@redhat.com>,
Tiwei Bie <tiwei.bie@intel.com>,
Zhihong Wang <zhihong.wang@intel.com>, <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v3 7/7] examples: disable Rx packet type parsing
Date: Mon, 30 Sep 2019 13:47:13 -0400 [thread overview]
Message-ID: <f7tk19p7k2m.fsf@dhcp-25.97.bos.redhat.com> (raw)
In-Reply-To: <20190929211916.31702-8-pbhagavatula@marvell.com> (pbhagavatula@marvell.com's message of "Mon, 30 Sep 2019 02:49:16 +0530")
<pbhagavatula@marvell.com> writes:
> From: Pavan Nikhilesh <pbhagavatula@marvell.com>
>
> Disable packet type parsing in examples that don't use
> `rte_mbuf::packet_type` by setting ptype_mask as 0 in
> `rte_eth_dev_set_supported_ptypes`
>
> Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
> ---
> examples/bbdev_app/main.c | 1 +
> examples/bond/main.c | 2 ++
> examples/distributor/Makefile | 1 +
> examples/distributor/main.c | 1 +
> examples/distributor/meson.build | 1 +
> examples/eventdev_pipeline/main.c | 1 +
> examples/eventdev_pipeline/meson.build | 1 +
> examples/exception_path/Makefile | 1 +
> examples/exception_path/main.c | 1 +
> examples/exception_path/meson.build | 1 +
> examples/flow_classify/flow_classify.c | 1 +
> examples/flow_filtering/Makefile | 1 +
> examples/flow_filtering/main.c | 1 +
> examples/flow_filtering/meson.build | 1 +
> examples/ip_pipeline/link.c | 1 +
> examples/ip_reassembly/Makefile | 1 +
> examples/ip_reassembly/main.c | 1 +
> examples/ip_reassembly/meson.build | 1 +
> examples/ipsec-secgw/ipsec-secgw.c | 1 +
> examples/ipv4_multicast/Makefile | 1 +
> examples/ipv4_multicast/main.c | 1 +
> examples/ipv4_multicast/meson.build | 1 +
> examples/kni/main.c | 1 +
> examples/l2fwd-cat/Makefile | 1 +
> examples/l2fwd-cat/l2fwd-cat.c | 1 +
> examples/l2fwd-cat/meson.build | 1 +
> examples/l2fwd-crypto/main.c | 1 +
> examples/l2fwd-jobstats/Makefile | 1 +
> examples/l2fwd-jobstats/main.c | 1 +
> examples/l2fwd-jobstats/meson.build | 1 +
> examples/l2fwd-keepalive/Makefile | 1 +
> examples/l2fwd-keepalive/main.c | 1 +
> examples/l2fwd-keepalive/meson.build | 1 +
> examples/l2fwd/Makefile | 1 +
> examples/l2fwd/main.c | 1 +
> examples/l2fwd/meson.build | 1 +
> examples/l3fwd-acl/Makefile | 1 +
> examples/l3fwd-acl/main.c | 1 +
> examples/l3fwd-acl/meson.build | 1 +
> examples/l3fwd-power/main.c | 1 +
> examples/l3fwd-vf/Makefile | 1 +
> examples/l3fwd-vf/main.c | 1 +
> examples/l3fwd-vf/meson.build | 1 +
> examples/link_status_interrupt/Makefile | 1 +
> examples/link_status_interrupt/main.c | 1 +
> examples/link_status_interrupt/meson.build | 1 +
> examples/load_balancer/Makefile | 1 +
> examples/load_balancer/init.c | 1 +
> examples/load_balancer/meson.build | 1 +
> examples/packet_ordering/Makefile | 1 +
> examples/packet_ordering/main.c | 1 +
> examples/packet_ordering/meson.build | 1 +
> examples/ptpclient/Makefile | 1 +
> examples/ptpclient/meson.build | 1 +
> examples/ptpclient/ptpclient.c | 1 +
> examples/qos_meter/Makefile | 1 +
> examples/qos_meter/main.c | 2 ++
> examples/qos_meter/meson.build | 1 +
> examples/qos_sched/Makefile | 1 +
> examples/qos_sched/init.c | 1 +
> examples/qos_sched/meson.build | 1 +
> examples/quota_watermark/qw/Makefile | 1 +
> examples/quota_watermark/qw/init.c | 1 +
> examples/rxtx_callbacks/main.c | 1 +
> examples/server_node_efd/server/Makefile | 1 +
> examples/server_node_efd/server/init.c | 1 +
> examples/skeleton/Makefile | 1 +
> examples/skeleton/basicfwd.c | 1 +
> examples/skeleton/meson.build | 1 +
> examples/tep_termination/Makefile | 1 +
> examples/tep_termination/meson.build | 1 +
> examples/tep_termination/vxlan_setup.c | 1 +
> examples/vhost/Makefile | 1 +
> examples/vhost/main.c | 1 +
> examples/vm_power_manager/Makefile | 1 +
> examples/vm_power_manager/main.c | 1 +
> examples/vm_power_manager/meson.build | 1 +
> examples/vmdq/Makefile | 1 +
> examples/vmdq/main.c | 1 +
> examples/vmdq/meson.build | 1 +
> examples/vmdq_dcb/Makefile | 1 +
> examples/vmdq_dcb/main.c | 1 +
> examples/vmdq_dcb/meson.build | 1 +
> 83 files changed, 85 insertions(+)
>
> diff --git a/examples/bbdev_app/main.c b/examples/bbdev_app/main.c
> index 9acf666dc..a32f63187 100644
> --- a/examples/bbdev_app/main.c
> +++ b/examples/bbdev_app/main.c
> @@ -478,6 +478,7 @@ initialize_ports(struct app_config_params *app_params,
> }
>
> rte_eth_promiscuous_enable(port_id);
> + rte_eth_dev_set_supported_ptypes(port_id, RTE_PTYPE_UNKNOWN);
This is strange, since the function signature is defined (in 1/7) as:
int rte_eth_dev_set_supported_ptypes(uint16_t port_id, uint32_t ptype_mask,
uint32_t *set_ptypes, int num);
Did you mean to add more args?
> rte_eth_macaddr_get(port_id, &bbdev_port_eth_addr);
> print_mac(port_id, &bbdev_port_eth_addr);
> diff --git a/examples/bond/main.c b/examples/bond/main.c
> index 1c0df9d46..8beb1dc14 100644
> --- a/examples/bond/main.c
> +++ b/examples/bond/main.c
> @@ -195,6 +195,7 @@ slave_port_init(uint16_t portid, struct rte_mempool *mbuf_pool)
> rte_exit(retval, "port %u: TX queue 0 setup failed (res=%d)",
> portid, retval);
>
> + rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN);
> retval = rte_eth_dev_start(portid);
> if (retval < 0)
> rte_exit(retval,
> @@ -271,6 +272,7 @@ bond_port_init(struct rte_mempool *mbuf_pool)
> rte_exit(retval, "port %u: TX queue 0 setup failed (res=%d)",
> BOND_PORT, retval);
>
> + rte_eth_dev_set_supported_ptypes(BOND_PORT, RTE_PTYPE_UNKNOWN);
> retval = rte_eth_dev_start(BOND_PORT);
> if (retval < 0)
> rte_exit(retval, "Start port %d failed (res=%d)", BOND_PORT, retval);
> diff --git a/examples/distributor/Makefile b/examples/distributor/Makefile
> index bac8d5578..a2a477279 100644
> --- a/examples/distributor/Makefile
> +++ b/examples/distributor/Makefile
> @@ -50,6 +50,7 @@ RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.conf
> include $(RTE_SDK)/mk/rte.vars.mk
>
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> # workaround for a gcc bug with noreturn attribute
> # http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
> diff --git a/examples/distributor/main.c b/examples/distributor/main.c
> index 81d7ca61d..bc945d862 100644
> --- a/examples/distributor/main.c
> +++ b/examples/distributor/main.c
> @@ -162,6 +162,7 @@ port_init(uint16_t port, struct rte_mempool *mbuf_pool)
> return retval;
> }
>
> + rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN);
> retval = rte_eth_dev_start(port);
> if (retval < 0)
> return retval;
> diff --git a/examples/distributor/meson.build b/examples/distributor/meson.build
> index 26f108d65..c2976f6bd 100644
> --- a/examples/distributor/meson.build
> +++ b/examples/distributor/meson.build
> @@ -10,6 +10,7 @@
> build = dpdk_conf.has('RTE_LIBRTE_POWER')
>
> deps += ['distributor', 'power']
> +allow_experimental_apis = true
> sources = files(
> 'main.c'
> )
> diff --git a/examples/eventdev_pipeline/main.c b/examples/eventdev_pipeline/main.c
> index a73b61d59..9f9968cf8 100644
> --- a/examples/eventdev_pipeline/main.c
> +++ b/examples/eventdev_pipeline/main.c
> @@ -393,6 +393,7 @@ main(int argc, char **argv)
>
> /* Start the Ethernet port. */
> RTE_ETH_FOREACH_DEV(portid) {
> + rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN);
> err = rte_eth_dev_start(portid);
> if (err < 0)
> rte_exit(EXIT_FAILURE, "Error starting ethdev %d\n",
> diff --git a/examples/eventdev_pipeline/meson.build b/examples/eventdev_pipeline/meson.build
> index a54c35aa7..0fc916b05 100644
> --- a/examples/eventdev_pipeline/meson.build
> +++ b/examples/eventdev_pipeline/meson.build
> @@ -7,6 +7,7 @@
> # DPDK instance, use 'make'
>
> deps += 'eventdev'
> +allow_experimental_apis = true
> sources = files(
> 'main.c',
> 'pipeline_worker_generic.c',
> diff --git a/examples/exception_path/Makefile b/examples/exception_path/Makefile
> index 90c7f133a..a7c961276 100644
> --- a/examples/exception_path/Makefile
> +++ b/examples/exception_path/Makefile
> @@ -51,6 +51,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
>
> CFLAGS += -O3
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> include $(RTE_SDK)/mk/rte.extapp.mk
>
> diff --git a/examples/exception_path/main.c b/examples/exception_path/main.c
> index 0d79e5a24..7dbc0970a 100644
> --- a/examples/exception_path/main.c
> +++ b/examples/exception_path/main.c
> @@ -464,6 +464,7 @@ init_port(uint16_t port)
> FATAL_ERROR("Could not setup up TX queue for port%u (%d)",
> port, ret);
>
> + rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN);
> ret = rte_eth_dev_start(port);
> if (ret < 0)
> FATAL_ERROR("Could not start port%u (%d)", port, ret);
> diff --git a/examples/exception_path/meson.build b/examples/exception_path/meson.build
> index c34e11e36..2b0a25036 100644
> --- a/examples/exception_path/meson.build
> +++ b/examples/exception_path/meson.build
> @@ -6,6 +6,7 @@
> # To build this example as a standalone application with an already-installed
> # DPDK instance, use 'make'
>
> +allow_experimental_apis = true
> sources = files(
> 'main.c'
> )
> diff --git a/examples/flow_classify/flow_classify.c b/examples/flow_classify/flow_classify.c
> index bc7f43ea9..aa25218a3 100644
> --- a/examples/flow_classify/flow_classify.c
> +++ b/examples/flow_classify/flow_classify.c
> @@ -231,6 +231,7 @@ port_init(uint8_t port, struct rte_mempool *mbuf_pool)
> }
>
> /* Start the Ethernet port. */
> + rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN);
> retval = rte_eth_dev_start(port);
> if (retval < 0)
> return retval;
> diff --git a/examples/flow_filtering/Makefile b/examples/flow_filtering/Makefile
> index a63a75555..793a08fae 100644
> --- a/examples/flow_filtering/Makefile
> +++ b/examples/flow_filtering/Makefile
> @@ -49,6 +49,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
>
> CFLAGS += -O3
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> include $(RTE_SDK)/mk/rte.extapp.mk
>
> diff --git a/examples/flow_filtering/main.c b/examples/flow_filtering/main.c
> index a0487be77..fbd1b6cc2 100644
> --- a/examples/flow_filtering/main.c
> +++ b/examples/flow_filtering/main.c
> @@ -176,6 +176,7 @@ init_port(void)
> }
>
> rte_eth_promiscuous_enable(port_id);
> + rte_eth_dev_set_supported_ptypes(port_id, RTE_PTYPE_UNKNOWN);
> ret = rte_eth_dev_start(port_id);
> if (ret < 0) {
> rte_exit(EXIT_FAILURE,
> diff --git a/examples/flow_filtering/meson.build b/examples/flow_filtering/meson.build
> index 407795c42..6f5d1b08a 100644
> --- a/examples/flow_filtering/meson.build
> +++ b/examples/flow_filtering/meson.build
> @@ -6,6 +6,7 @@
> # To build this example as a standalone application with an already-installed
> # DPDK instance, use 'make'
>
> +allow_experimental_apis = true
> sources = files(
> 'main.c',
> )
> diff --git a/examples/ip_pipeline/link.c b/examples/ip_pipeline/link.c
> index 787eb866a..9f8b5b2ae 100644
> --- a/examples/ip_pipeline/link.c
> +++ b/examples/ip_pipeline/link.c
> @@ -205,6 +205,7 @@ link_create(const char *name, struct link_params *params)
> return NULL;
> }
>
> + rte_eth_dev_set_supported_ptypes(port_id, RTE_PTYPE_UNKNOWN);
> /* Port start */
> status = rte_eth_dev_start(port_id);
> if (status < 0)
> diff --git a/examples/ip_reassembly/Makefile b/examples/ip_reassembly/Makefile
> index 0b1a904e0..19c462388 100644
> --- a/examples/ip_reassembly/Makefile
> +++ b/examples/ip_reassembly/Makefile
> @@ -52,6 +52,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
>
> CFLAGS += -O3
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> # workaround for a gcc bug with noreturn attribute
> # http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
> diff --git a/examples/ip_reassembly/main.c b/examples/ip_reassembly/main.c
> index 38b39be6b..ff5407892 100644
> --- a/examples/ip_reassembly/main.c
> +++ b/examples/ip_reassembly/main.c
> @@ -1158,6 +1158,7 @@ main(int argc, char **argv)
> if ((enabled_port_mask & (1 << portid)) == 0) {
> continue;
> }
> + rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN);
> /* Start device */
> ret = rte_eth_dev_start(portid);
> if (ret < 0)
> diff --git a/examples/ip_reassembly/meson.build b/examples/ip_reassembly/meson.build
> index 8ebd48291..8a667c265 100644
> --- a/examples/ip_reassembly/meson.build
> +++ b/examples/ip_reassembly/meson.build
> @@ -7,6 +7,7 @@
> # DPDK instance, use 'make'
>
> deps += ['lpm', 'ip_frag']
> +allow_experimental_apis = true
> sources = files(
> 'main.c'
> )
> diff --git a/examples/ipsec-secgw/ipsec-secgw.c b/examples/ipsec-secgw/ipsec-secgw.c
> index 0d1fd6af6..619d248c8 100644
> --- a/examples/ipsec-secgw/ipsec-secgw.c
> +++ b/examples/ipsec-secgw/ipsec-secgw.c
> @@ -2448,6 +2448,7 @@ main(int32_t argc, char **argv)
> if ((enabled_port_mask & (1 << portid)) == 0)
> continue;
>
> + rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN);
> /*
> * Start device
> * note: device must be started before a flow rule
> diff --git a/examples/ipv4_multicast/Makefile b/examples/ipv4_multicast/Makefile
> index 5f8a67dd4..5171f7ab2 100644
> --- a/examples/ipv4_multicast/Makefile
> +++ b/examples/ipv4_multicast/Makefile
> @@ -52,6 +52,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
>
> CFLAGS += -O3
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> # workaround for a gcc bug with noreturn attribute
> # http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
> diff --git a/examples/ipv4_multicast/main.c b/examples/ipv4_multicast/main.c
> index 72eaadc51..29b3fed9c 100644
> --- a/examples/ipv4_multicast/main.c
> +++ b/examples/ipv4_multicast/main.c
> @@ -765,6 +765,7 @@ main(int argc, char **argv)
> qconf->tx_queue_id[portid] = queueid;
> queueid++;
> }
> + rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN);
> rte_eth_allmulticast_enable(portid);
> /* Start device */
> ret = rte_eth_dev_start(portid);
> diff --git a/examples/ipv4_multicast/meson.build b/examples/ipv4_multicast/meson.build
> index d9e4c7c21..6969e2c54 100644
> --- a/examples/ipv4_multicast/meson.build
> +++ b/examples/ipv4_multicast/meson.build
> @@ -7,6 +7,7 @@
> # DPDK instance, use 'make'
>
> deps += 'hash'
> +allow_experimental_apis = true
> sources = files(
> 'main.c'
> )
> diff --git a/examples/kni/main.c b/examples/kni/main.c
> index 4710d7176..3163087ff 100644
> --- a/examples/kni/main.c
> +++ b/examples/kni/main.c
> @@ -625,6 +625,7 @@ init_port(uint16_t port)
> rte_exit(EXIT_FAILURE, "Could not setup up TX queue for "
> "port%u (%d)\n", (unsigned)port, ret);
>
> + rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN);
> ret = rte_eth_dev_start(port);
> if (ret < 0)
> rte_exit(EXIT_FAILURE, "Could not start port%u (%d)\n",
> diff --git a/examples/l2fwd-cat/Makefile b/examples/l2fwd-cat/Makefile
> index c1960d6d3..d6a25e42a 100644
> --- a/examples/l2fwd-cat/Makefile
> +++ b/examples/l2fwd-cat/Makefile
> @@ -66,6 +66,7 @@ endif
> EXTRA_CFLAGS += -O3 -g -Wfatal-errors
>
> CFLAGS += -I$(PQOS_INSTALL_PATH)/../include
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> LDLIBS += -L$(PQOS_INSTALL_PATH)
> LDLIBS += -lpqos
> diff --git a/examples/l2fwd-cat/l2fwd-cat.c b/examples/l2fwd-cat/l2fwd-cat.c
> index b34b40a00..ddd9888b1 100644
> --- a/examples/l2fwd-cat/l2fwd-cat.c
> +++ b/examples/l2fwd-cat/l2fwd-cat.c
> @@ -67,6 +67,7 @@ port_init(uint16_t port, struct rte_mempool *mbuf_pool)
> return retval;
> }
>
> + rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN);
> /* Start the Ethernet port. */
> retval = rte_eth_dev_start(port);
> if (retval < 0)
> diff --git a/examples/l2fwd-cat/meson.build b/examples/l2fwd-cat/meson.build
> index 4e2777a03..37c96040d 100644
> --- a/examples/l2fwd-cat/meson.build
> +++ b/examples/l2fwd-cat/meson.build
> @@ -10,6 +10,7 @@ pqos = cc.find_library('pqos', required: false)
> build = pqos.found()
> ext_deps += pqos
> cflags += '-I/usr/local/include' # assume pqos lib installed in /usr/local
> +allow_experimental_apis = true
> sources = files(
> 'cat.c', 'l2fwd-cat.c'
> )
> diff --git a/examples/l2fwd-crypto/main.c b/examples/l2fwd-crypto/main.c
> index 3fe2ba725..6aad08b06 100644
> --- a/examples/l2fwd-crypto/main.c
> +++ b/examples/l2fwd-crypto/main.c
> @@ -2559,6 +2559,7 @@ initialize_ports(struct l2fwd_crypto_options *options)
> return -1;
> }
>
> + rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN);
> /* Start device */
> retval = rte_eth_dev_start(portid);
> if (retval < 0) {
> diff --git a/examples/l2fwd-jobstats/Makefile b/examples/l2fwd-jobstats/Makefile
> index 729a39e93..09834e979 100644
> --- a/examples/l2fwd-jobstats/Makefile
> +++ b/examples/l2fwd-jobstats/Makefile
> @@ -52,6 +52,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
>
> CFLAGS += -O3
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> include $(RTE_SDK)/mk/rte.extapp.mk
> endif
> diff --git a/examples/l2fwd-jobstats/main.c b/examples/l2fwd-jobstats/main.c
> index 77e44dc82..61ad8e759 100644
> --- a/examples/l2fwd-jobstats/main.c
> +++ b/examples/l2fwd-jobstats/main.c
> @@ -902,6 +902,7 @@ main(int argc, char **argv)
> "Cannot set error callback for tx buffer on port %u\n",
> portid);
>
> + rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN);
> /* Start device */
> ret = rte_eth_dev_start(portid);
> if (ret < 0)
> diff --git a/examples/l2fwd-jobstats/meson.build b/examples/l2fwd-jobstats/meson.build
> index 1ffd484e2..3653aa7ec 100644
> --- a/examples/l2fwd-jobstats/meson.build
> +++ b/examples/l2fwd-jobstats/meson.build
> @@ -7,6 +7,7 @@
> # DPDK instance, use 'make'
>
> deps += ['jobstats', 'timer']
> +allow_experimental_apis = true
> sources = files(
> 'main.c'
> )
> diff --git a/examples/l2fwd-keepalive/Makefile b/examples/l2fwd-keepalive/Makefile
> index 37de27a6f..584257ae2 100644
> --- a/examples/l2fwd-keepalive/Makefile
> +++ b/examples/l2fwd-keepalive/Makefile
> @@ -53,6 +53,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
>
> CFLAGS += -O3
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
> LDFLAGS += -lrt
>
> include $(RTE_SDK)/mk/rte.extapp.mk
> diff --git a/examples/l2fwd-keepalive/main.c b/examples/l2fwd-keepalive/main.c
> index 9831a4323..bf662bd37 100644
> --- a/examples/l2fwd-keepalive/main.c
> +++ b/examples/l2fwd-keepalive/main.c
> @@ -696,6 +696,7 @@ main(int argc, char **argv)
> "Cannot set error callback for tx buffer on port %u\n",
> portid);
>
> + rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN);
> /* Start device */
> ret = rte_eth_dev_start(portid);
> if (ret < 0)
> diff --git a/examples/l2fwd-keepalive/meson.build b/examples/l2fwd-keepalive/meson.build
> index 6f7b007e1..2dffffaaa 100644
> --- a/examples/l2fwd-keepalive/meson.build
> +++ b/examples/l2fwd-keepalive/meson.build
> @@ -8,6 +8,7 @@
>
> ext_deps += cc.find_library('rt')
> deps += 'timer'
> +allow_experimental_apis = true
> sources = files(
> 'main.c', 'shm.c'
> )
> diff --git a/examples/l2fwd/Makefile b/examples/l2fwd/Makefile
> index 230352093..123e6161c 100644
> --- a/examples/l2fwd/Makefile
> +++ b/examples/l2fwd/Makefile
> @@ -51,6 +51,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
>
> CFLAGS += -O3
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> include $(RTE_SDK)/mk/rte.extapp.mk
> endif
> diff --git a/examples/l2fwd/main.c b/examples/l2fwd/main.c
> index 1e2b14297..1b940038f 100644
> --- a/examples/l2fwd/main.c
> +++ b/examples/l2fwd/main.c
> @@ -694,6 +694,7 @@ main(int argc, char **argv)
> "Cannot set error callback for tx buffer on port %u\n",
> portid);
>
> + rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN);
> /* Start device */
> ret = rte_eth_dev_start(portid);
> if (ret < 0)
> diff --git a/examples/l2fwd/meson.build b/examples/l2fwd/meson.build
> index c34e11e36..2b0a25036 100644
> --- a/examples/l2fwd/meson.build
> +++ b/examples/l2fwd/meson.build
> @@ -6,6 +6,7 @@
> # To build this example as a standalone application with an already-installed
> # DPDK instance, use 'make'
>
> +allow_experimental_apis = true
> sources = files(
> 'main.c'
> )
> diff --git a/examples/l3fwd-acl/Makefile b/examples/l3fwd-acl/Makefile
> index e2c989f71..df590f8e9 100644
> --- a/examples/l3fwd-acl/Makefile
> +++ b/examples/l3fwd-acl/Makefile
> @@ -51,6 +51,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
>
> CFLAGS += -O3
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> # workaround for a gcc bug with noreturn attribute
> # http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
> diff --git a/examples/l3fwd-acl/main.c b/examples/l3fwd-acl/main.c
> index 0c44df767..1a0c09c1d 100644
> --- a/examples/l3fwd-acl/main.c
> +++ b/examples/l3fwd-acl/main.c
> @@ -2056,6 +2056,7 @@ main(int argc, char **argv)
> if ((enabled_port_mask & (1 << portid)) == 0)
> continue;
>
> + rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN);
> /* Start device */
> ret = rte_eth_dev_start(portid);
> if (ret < 0)
> diff --git a/examples/l3fwd-acl/meson.build b/examples/l3fwd-acl/meson.build
> index 7096e00c1..68cebd6ce 100644
> --- a/examples/l3fwd-acl/meson.build
> +++ b/examples/l3fwd-acl/meson.build
> @@ -7,6 +7,7 @@
> # DPDK instance, use 'make'
>
> deps += ['acl', 'lpm', 'hash']
> +allow_experimental_apis = true
> sources = files(
> 'main.c'
> )
> diff --git a/examples/l3fwd-power/main.c b/examples/l3fwd-power/main.c
> index fd8d9528f..136f446b3 100644
> --- a/examples/l3fwd-power/main.c
> +++ b/examples/l3fwd-power/main.c
> @@ -2426,6 +2426,7 @@ main(int argc, char **argv)
> if ((enabled_port_mask & (1 << portid)) == 0) {
> continue;
> }
> + rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN);
> /* Start device */
> ret = rte_eth_dev_start(portid);
> if (ret < 0)
> diff --git a/examples/l3fwd-vf/Makefile b/examples/l3fwd-vf/Makefile
> index 7b186a23c..db7f51f2f 100644
> --- a/examples/l3fwd-vf/Makefile
> +++ b/examples/l3fwd-vf/Makefile
> @@ -51,6 +51,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
>
> CFLAGS += -O3 $(USER_FLAGS)
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> # workaround for a gcc bug with noreturn attribute
> # http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
> diff --git a/examples/l3fwd-vf/main.c b/examples/l3fwd-vf/main.c
> index 572e74cf5..387d2426c 100644
> --- a/examples/l3fwd-vf/main.c
> +++ b/examples/l3fwd-vf/main.c
> @@ -1051,6 +1051,7 @@ main(int argc, char **argv)
> if ((enabled_port_mask & (1 << portid)) == 0) {
> continue;
> }
> + rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN);
> /* Start device */
> ret = rte_eth_dev_start(portid);
> if (ret < 0)
> diff --git a/examples/l3fwd-vf/meson.build b/examples/l3fwd-vf/meson.build
> index 226286e74..00f3c38f4 100644
> --- a/examples/l3fwd-vf/meson.build
> +++ b/examples/l3fwd-vf/meson.build
> @@ -7,6 +7,7 @@
> # DPDK instance, use 'make'
>
> deps += ['lpm', 'hash']
> +allow_experimental_apis = true
> sources = files(
> 'main.c'
> )
> diff --git a/examples/link_status_interrupt/Makefile b/examples/link_status_interrupt/Makefile
> index 97e5a14a8..6ddedd4de 100644
> --- a/examples/link_status_interrupt/Makefile
> +++ b/examples/link_status_interrupt/Makefile
> @@ -51,6 +51,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
>
> CFLAGS += -O3
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> include $(RTE_SDK)/mk/rte.extapp.mk
> endif
> diff --git a/examples/link_status_interrupt/main.c b/examples/link_status_interrupt/main.c
> index 9cd4dc7a6..abd84b862 100644
> --- a/examples/link_status_interrupt/main.c
> +++ b/examples/link_status_interrupt/main.c
> @@ -676,6 +676,7 @@ main(int argc, char **argv)
> rte_exit(EXIT_FAILURE, "Cannot set error callback for "
> "tx buffer on port %u\n", (unsigned) portid);
>
> + rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN);
> /* Start device */
> ret = rte_eth_dev_start(portid);
> if (ret < 0)
> diff --git a/examples/link_status_interrupt/meson.build b/examples/link_status_interrupt/meson.build
> index c34e11e36..2b0a25036 100644
> --- a/examples/link_status_interrupt/meson.build
> +++ b/examples/link_status_interrupt/meson.build
> @@ -6,6 +6,7 @@
> # To build this example as a standalone application with an already-installed
> # DPDK instance, use 'make'
>
> +allow_experimental_apis = true
> sources = files(
> 'main.c'
> )
> diff --git a/examples/load_balancer/Makefile b/examples/load_balancer/Makefile
> index caae8a107..dcba9194c 100644
> --- a/examples/load_balancer/Makefile
> +++ b/examples/load_balancer/Makefile
> @@ -51,6 +51,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
>
> CFLAGS += -O3 -g
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> # workaround for a gcc bug with noreturn attribute
> # http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
> diff --git a/examples/load_balancer/init.c b/examples/load_balancer/init.c
> index 3ab7d0211..52f677fd4 100644
> --- a/examples/load_balancer/init.c
> +++ b/examples/load_balancer/init.c
> @@ -496,6 +496,7 @@ app_init_nics(void)
> }
> }
>
> + rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN);
> /* Start port */
> ret = rte_eth_dev_start(port);
> if (ret < 0) {
> diff --git a/examples/load_balancer/meson.build b/examples/load_balancer/meson.build
> index 4f7ac3999..19708974c 100644
> --- a/examples/load_balancer/meson.build
> +++ b/examples/load_balancer/meson.build
> @@ -7,6 +7,7 @@
> # DPDK instance, use 'make'
>
> deps += 'lpm'
> +allow_experimental_apis = true
> sources = files(
> 'config.c', 'init.c', 'main.c', 'runtime.c'
> )
> diff --git a/examples/packet_ordering/Makefile b/examples/packet_ordering/Makefile
> index 51acaf7eb..9ba3fa9e8 100644
> --- a/examples/packet_ordering/Makefile
> +++ b/examples/packet_ordering/Makefile
> @@ -51,6 +51,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
>
> CFLAGS += -O3
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> include $(RTE_SDK)/mk/rte.extapp.mk
> endif
> diff --git a/examples/packet_ordering/main.c b/examples/packet_ordering/main.c
> index 030e92299..41295690d 100644
> --- a/examples/packet_ordering/main.c
> +++ b/examples/packet_ordering/main.c
> @@ -312,6 +312,7 @@ configure_eth_port(uint16_t port_id)
> return ret;
> }
>
> + rte_eth_dev_set_supported_ptypes(port_id, RTE_PTYPE_UNKNOWN);
> ret = rte_eth_dev_start(port_id);
> if (ret < 0)
> return ret;
> diff --git a/examples/packet_ordering/meson.build b/examples/packet_ordering/meson.build
> index 6c2fccdcb..a3776946f 100644
> --- a/examples/packet_ordering/meson.build
> +++ b/examples/packet_ordering/meson.build
> @@ -7,6 +7,7 @@
> # DPDK instance, use 'make'
>
> deps += 'reorder'
> +allow_experimental_apis = true
> sources = files(
> 'main.c'
> )
> diff --git a/examples/ptpclient/Makefile b/examples/ptpclient/Makefile
> index 89e2bacbd..f158d96b9 100644
> --- a/examples/ptpclient/Makefile
> +++ b/examples/ptpclient/Makefile
> @@ -50,6 +50,7 @@ RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.conf
> include $(RTE_SDK)/mk/rte.vars.mk
>
> CFLAGS += -O3
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
> CFLAGS += $(WERROR_FLAGS)
>
> # workaround for a gcc bug with noreturn attribute
> diff --git a/examples/ptpclient/meson.build b/examples/ptpclient/meson.build
> index fa0cbe93c..d4171a218 100644
> --- a/examples/ptpclient/meson.build
> +++ b/examples/ptpclient/meson.build
> @@ -6,6 +6,7 @@
> # To build this example as a standalone application with an already-installed
> # DPDK instance, use 'make'
>
> +allow_experimental_apis = true
> sources = files(
> 'ptpclient.c'
> )
> diff --git a/examples/ptpclient/ptpclient.c b/examples/ptpclient/ptpclient.c
> index 31778fd95..351596fc3 100644
> --- a/examples/ptpclient/ptpclient.c
> +++ b/examples/ptpclient/ptpclient.c
> @@ -227,6 +227,7 @@ port_init(uint16_t port, struct rte_mempool *mbuf_pool)
> return retval;
> }
>
> + rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN);
> /* Start the Ethernet port. */
> retval = rte_eth_dev_start(port);
> if (retval < 0)
> diff --git a/examples/qos_meter/Makefile b/examples/qos_meter/Makefile
> index e5217cf7c..a1533d08f 100644
> --- a/examples/qos_meter/Makefile
> +++ b/examples/qos_meter/Makefile
> @@ -52,6 +52,7 @@ RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.conf
> include $(RTE_SDK)/mk/rte.vars.mk
>
> CFLAGS += -O3
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
> CFLAGS += $(WERROR_FLAGS)
>
> # workaround for a gcc bug with noreturn attribute
> diff --git a/examples/qos_meter/main.c b/examples/qos_meter/main.c
> index da7afe8be..2accbc9b6 100644
> --- a/examples/qos_meter/main.c
> +++ b/examples/qos_meter/main.c
> @@ -419,10 +419,12 @@ main(int argc, char **argv)
>
> rte_eth_tx_buffer_init(tx_buffer, PKT_TX_BURST_MAX);
>
> + rte_eth_dev_set_supported_ptypes(port_rx, RTE_PTYPE_UNKNOWN);
> ret = rte_eth_dev_start(port_rx);
> if (ret < 0)
> rte_exit(EXIT_FAILURE, "Port %d start error (%d)\n", port_rx, ret);
>
> + rte_eth_dev_set_supported_ptypes(port_tx, RTE_PTYPE_UNKNOWN);
> ret = rte_eth_dev_start(port_tx);
> if (ret < 0)
> rte_exit(EXIT_FAILURE, "Port %d start error (%d)\n", port_tx, ret);
> diff --git a/examples/qos_meter/meson.build b/examples/qos_meter/meson.build
> index ef7779f2f..10cd4bc79 100644
> --- a/examples/qos_meter/meson.build
> +++ b/examples/qos_meter/meson.build
> @@ -7,6 +7,7 @@
> # DPDK instance, use 'make'
>
> deps += 'meter'
> +allow_experimental_apis = true
> sources = files(
> 'main.c', 'rte_policer.c'
> )
> diff --git a/examples/qos_sched/Makefile b/examples/qos_sched/Makefile
> index ce2d25371..7d3d3019f 100644
> --- a/examples/qos_sched/Makefile
> +++ b/examples/qos_sched/Makefile
> @@ -58,6 +58,7 @@ else
>
> CFLAGS += -O3
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> include $(RTE_SDK)/mk/rte.extapp.mk
>
> diff --git a/examples/qos_sched/init.c b/examples/qos_sched/init.c
> index b05206d5a..35e4c90a2 100644
> --- a/examples/qos_sched/init.c
> +++ b/examples/qos_sched/init.c
> @@ -138,6 +138,7 @@ app_init_port(uint16_t portid, struct rte_mempool *mp)
> "rte_eth_tx_queue_setup: err=%d, port=%u queue=%d\n",
> ret, portid, 0);
>
> + rte_eth_dev_set_supported_ptypes(portid, RTE_PTYPE_UNKNOWN);
> /* Start device */
> ret = rte_eth_dev_start(portid);
> if (ret < 0)
> diff --git a/examples/qos_sched/meson.build b/examples/qos_sched/meson.build
> index 289b81ce8..5101652af 100644
> --- a/examples/qos_sched/meson.build
> +++ b/examples/qos_sched/meson.build
> @@ -7,6 +7,7 @@
> # DPDK instance, use 'make'
>
> deps += ['sched', 'cfgfile']
> +allow_experimental_apis = true
> sources = files(
> 'app_thread.c', 'args.c', 'cfg_file.c', 'cmdline.c',
> 'init.c', 'main.c', 'stats.c'
> diff --git a/examples/quota_watermark/qw/Makefile b/examples/quota_watermark/qw/Makefile
> index 3f10f01c3..e06f4482b 100644
> --- a/examples/quota_watermark/qw/Makefile
> +++ b/examples/quota_watermark/qw/Makefile
> @@ -18,5 +18,6 @@ SRCS-y := args.c init.c main.c
>
> CFLAGS += -O3 -DQW_SOFTWARE_FC
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> include $(RTE_SDK)/mk/rte.extapp.mk
> diff --git a/examples/quota_watermark/qw/init.c b/examples/quota_watermark/qw/init.c
> index 5a0f64f45..098e3c16e 100644
> --- a/examples/quota_watermark/qw/init.c
> +++ b/examples/quota_watermark/qw/init.c
> @@ -96,6 +96,7 @@ void configure_eth_port(uint16_t port_id)
> "Failed to setup hardware flow control on port %u (error %d)\n",
> (unsigned int) port_id, ret);
>
> + rte_eth_dev_set_supported_ptypes(port_id, RTE_PTYPE_UNKNOWN);
> /* Start the port */
> ret = rte_eth_dev_start(port_id);
> if (ret < 0)
> diff --git a/examples/rxtx_callbacks/main.c b/examples/rxtx_callbacks/main.c
> index dbcd9f4fc..c4acac585 100644
> --- a/examples/rxtx_callbacks/main.c
> +++ b/examples/rxtx_callbacks/main.c
> @@ -152,6 +152,7 @@ port_init(uint16_t port, struct rte_mempool *mbuf_pool)
> return retval;
> }
>
> + rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN);
> retval = rte_eth_dev_start(port);
> if (retval < 0)
> return retval;
> diff --git a/examples/server_node_efd/server/Makefile b/examples/server_node_efd/server/Makefile
> index 4837bd3ea..acbd12ae2 100644
> --- a/examples/server_node_efd/server/Makefile
> +++ b/examples/server_node_efd/server/Makefile
> @@ -25,5 +25,6 @@ INC := $(sort $(wildcard *.h))
>
> CFLAGS += $(WERROR_FLAGS) -O3
> CFLAGS += -I$(SRCDIR)/../shared
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> include $(RTE_SDK)/mk/rte.extapp.mk
> diff --git a/examples/server_node_efd/server/init.c b/examples/server_node_efd/server/init.c
> index af5a18e28..b4ff9dd57 100644
> --- a/examples/server_node_efd/server/init.c
> +++ b/examples/server_node_efd/server/init.c
> @@ -149,6 +149,7 @@ init_port(uint16_t port_num)
>
> rte_eth_promiscuous_enable(port_num);
>
> + rte_eth_dev_set_supported_ptypes(port_num, RTE_PTYPE_UNKNOWN);
> retval = rte_eth_dev_start(port_num);
> if (retval < 0)
> return retval;
> diff --git a/examples/skeleton/Makefile b/examples/skeleton/Makefile
> index c5ac26029..0037d6b25 100644
> --- a/examples/skeleton/Makefile
> +++ b/examples/skeleton/Makefile
> @@ -50,6 +50,7 @@ RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.conf
> include $(RTE_SDK)/mk/rte.vars.mk
>
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> # workaround for a gcc bug with noreturn attribute
> # http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
> diff --git a/examples/skeleton/basicfwd.c b/examples/skeleton/basicfwd.c
> index a8a8e98f0..6c10a06ef 100644
> --- a/examples/skeleton/basicfwd.c
> +++ b/examples/skeleton/basicfwd.c
> @@ -76,6 +76,7 @@ port_init(uint16_t port, struct rte_mempool *mbuf_pool)
> return retval;
> }
>
> + rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN);
> /* Start the Ethernet port. */
> retval = rte_eth_dev_start(port);
> if (retval < 0)
> diff --git a/examples/skeleton/meson.build b/examples/skeleton/meson.build
> index 9bb9ec329..ef46b187e 100644
> --- a/examples/skeleton/meson.build
> +++ b/examples/skeleton/meson.build
> @@ -6,6 +6,7 @@
> # To build this example as a standalone application with an already-installed
> # DPDK instance, use 'make'
>
> +allow_experimental_apis = true
> sources = files(
> 'basicfwd.c'
> )
> diff --git a/examples/tep_termination/Makefile b/examples/tep_termination/Makefile
> index 31165bd92..586838676 100644
> --- a/examples/tep_termination/Makefile
> +++ b/examples/tep_termination/Makefile
> @@ -61,6 +61,7 @@ endif
> CFLAGS += -O3
> CFLAGS += $(WERROR_FLAGS)
> CFLAGS += -Wno-deprecated-declarations
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> include $(RTE_SDK)/mk/rte.extapp.mk
> endif
> diff --git a/examples/tep_termination/meson.build b/examples/tep_termination/meson.build
> index f65d68980..f40b1c0b8 100644
> --- a/examples/tep_termination/meson.build
> +++ b/examples/tep_termination/meson.build
> @@ -11,6 +11,7 @@ if not is_linux
> endif
> deps += ['hash', 'vhost']
> cflags += '-Wno-deprecated-declarations'
> +allow_experimental_apis = true
> sources = files(
> 'main.c', 'vxlan.c', 'vxlan_setup.c'
> )
> diff --git a/examples/tep_termination/vxlan_setup.c b/examples/tep_termination/vxlan_setup.c
> index 9a0880002..538a54b3a 100644
> --- a/examples/tep_termination/vxlan_setup.c
> +++ b/examples/tep_termination/vxlan_setup.c
> @@ -167,6 +167,7 @@ vxlan_port_init(uint16_t port, struct rte_mempool *mbuf_pool)
> return retval;
> }
>
> + rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN);
> /* Start the device. */
> retval = rte_eth_dev_start(port);
> if (retval < 0)
> diff --git a/examples/vhost/Makefile b/examples/vhost/Makefile
> index f84b7f017..7722e81c7 100644
> --- a/examples/vhost/Makefile
> +++ b/examples/vhost/Makefile
> @@ -62,6 +62,7 @@ else
> CFLAGS += -DALLOW_EXPERIMENTAL_API
> CFLAGS += -O2 -D_FILE_OFFSET_BITS=64
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> include $(RTE_SDK)/mk/rte.extapp.mk
>
> diff --git a/examples/vhost/main.c b/examples/vhost/main.c
> index 0961db080..57438b22c 100644
> --- a/examples/vhost/main.c
> +++ b/examples/vhost/main.c
> @@ -321,6 +321,7 @@ port_init(uint16_t port)
> }
> }
>
> + rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN);
> /* Start the device. */
> retval = rte_eth_dev_start(port);
> if (retval < 0) {
> diff --git a/examples/vm_power_manager/Makefile b/examples/vm_power_manager/Makefile
> index 2fdb991d7..65c2ad179 100644
> --- a/examples/vm_power_manager/Makefile
> +++ b/examples/vm_power_manager/Makefile
> @@ -28,6 +28,7 @@ endif
>
> CFLAGS += -O3 -I$(RTE_SDK)/lib/librte_power/
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> LDLIBS += -lvirt
>
> diff --git a/examples/vm_power_manager/main.c b/examples/vm_power_manager/main.c
> index 54c704610..190a7a9ea 100644
> --- a/examples/vm_power_manager/main.c
> +++ b/examples/vm_power_manager/main.c
> @@ -99,6 +99,7 @@ port_init(uint16_t port, struct rte_mempool *mbuf_pool)
> return retval;
> }
>
> + rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN);
> /* Start the Ethernet port. */
> retval = rte_eth_dev_start(port);
> if (retval < 0)
> diff --git a/examples/vm_power_manager/meson.build b/examples/vm_power_manager/meson.build
> index 20a4a05b3..54e2b584f 100644
> --- a/examples/vm_power_manager/meson.build
> +++ b/examples/vm_power_manager/meson.build
> @@ -25,6 +25,7 @@ if dpdk_conf.has('RTE_LIBRTE_IXGBE_PMD')
> deps += ['pmd_ixgbe']
> endif
>
> +allow_experimental_apis = true
> sources = files(
> 'channel_manager.c', 'channel_monitor.c', 'main.c', 'parse.c', 'power_manager.c', 'vm_power_cli.c'
> )
> diff --git a/examples/vmdq/Makefile b/examples/vmdq/Makefile
> index 1557ee86b..2168747cc 100644
> --- a/examples/vmdq/Makefile
> +++ b/examples/vmdq/Makefile
> @@ -50,6 +50,7 @@ RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.conf
> include $(RTE_SDK)/mk/rte.vars.mk
>
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> EXTRA_CFLAGS += -O3
>
> diff --git a/examples/vmdq/main.c b/examples/vmdq/main.c
> index 7281ffd7f..87cf230f4 100644
> --- a/examples/vmdq/main.c
> +++ b/examples/vmdq/main.c
> @@ -258,6 +258,7 @@ port_init(uint16_t port, struct rte_mempool *mbuf_pool)
> }
> }
>
> + rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN);
> retval = rte_eth_dev_start(port);
> if (retval < 0) {
> printf("port %d start failed\n", port);
> diff --git a/examples/vmdq/meson.build b/examples/vmdq/meson.build
> index c34e11e36..2b0a25036 100644
> --- a/examples/vmdq/meson.build
> +++ b/examples/vmdq/meson.build
> @@ -6,6 +6,7 @@
> # To build this example as a standalone application with an already-installed
> # DPDK instance, use 'make'
>
> +allow_experimental_apis = true
> sources = files(
> 'main.c'
> )
> diff --git a/examples/vmdq_dcb/Makefile b/examples/vmdq_dcb/Makefile
> index 391096cfb..ea1574d91 100644
> --- a/examples/vmdq_dcb/Makefile
> +++ b/examples/vmdq_dcb/Makefile
> @@ -50,6 +50,7 @@ RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.conf
> include $(RTE_SDK)/mk/rte.vars.mk
>
> CFLAGS += $(WERROR_FLAGS)
> +CFLAGS += -DALLOW_EXPERIMENTAL_API
>
> # workaround for a gcc bug with noreturn attribute
> # http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
> diff --git a/examples/vmdq_dcb/main.c b/examples/vmdq_dcb/main.c
> index 389000327..bace88e47 100644
> --- a/examples/vmdq_dcb/main.c
> +++ b/examples/vmdq_dcb/main.c
> @@ -313,6 +313,7 @@ port_init(uint16_t port, struct rte_mempool *mbuf_pool)
> }
> }
>
> + rte_eth_dev_set_supported_ptypes(port, RTE_PTYPE_UNKNOWN);
> retval = rte_eth_dev_start(port);
> if (retval < 0) {
> printf("port %d start failed\n", port);
> diff --git a/examples/vmdq_dcb/meson.build b/examples/vmdq_dcb/meson.build
> index c34e11e36..2b0a25036 100644
> --- a/examples/vmdq_dcb/meson.build
> +++ b/examples/vmdq_dcb/meson.build
> @@ -6,6 +6,7 @@
> # To build this example as a standalone application with an already-installed
> # DPDK instance, use 'make'
>
> +allow_experimental_apis = true
> sources = files(
> 'main.c'
> )
next prev parent reply other threads:[~2019-09-30 17:47 UTC|newest]
Thread overview: 245+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-21 20:47 [dpdk-dev] [PATCH v2 0/7] ethdev: add new Rx offload flags pbhagavatula
2019-08-21 20:47 ` [dpdk-dev] [PATCH v2 1/7] ethdev: add set ptype function pbhagavatula
2019-08-23 9:44 ` Andrew Rybchenko
2019-10-01 14:54 ` Jerin Jacob
2019-08-21 20:47 ` [dpdk-dev] [PATCH v2 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-08-23 1:19 ` Stephen Hemminger
2019-08-27 13:44 ` Andrew Rybchenko
2019-08-23 9:49 ` Andrew Rybchenko
2019-08-21 20:47 ` [dpdk-dev] [PATCH v2 3/7] ethdev: add flow action type " pbhagavatula
2019-08-23 10:00 ` Andrew Rybchenko
2019-08-21 20:47 ` [dpdk-dev] [PATCH v2 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-01 14:43 ` Jerin Jacob
2019-10-01 15:40 ` Ajit Khaparde
2019-08-21 20:47 ` [dpdk-dev] [PATCH v2 5/7] drivers/net: update Rx flow flag and mark capabilities pbhagavatula
2019-08-23 10:03 ` Andrew Rybchenko
2019-10-01 14:48 ` Jerin Jacob
2019-08-21 20:47 ` [dpdk-dev] [PATCH v2 6/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-08-21 20:47 ` [dpdk-dev] [PATCH v2 7/7] examples: disable Rx packet type parsing pbhagavatula
2019-08-23 10:10 ` Andrew Rybchenko
2019-09-29 21:19 ` [dpdk-dev] [PATCH v3 0/7] ethdev: add new Rx offload flags pbhagavatula
2019-09-29 21:19 ` [dpdk-dev] [PATCH v3 1/7] ethdev: add set ptype function pbhagavatula
2019-09-29 21:19 ` [dpdk-dev] [PATCH v3 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-09-29 21:19 ` [dpdk-dev] [PATCH v3 3/7] ethdev: add flow action type " pbhagavatula
2019-09-29 21:19 ` [dpdk-dev] [PATCH v3 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-09-29 21:19 ` [dpdk-dev] [PATCH v3 5/7] drivers/net: update Rx flow flag and mark capabilities pbhagavatula
2019-09-29 21:19 ` [dpdk-dev] [PATCH v3 6/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-09-29 21:19 ` [dpdk-dev] [PATCH v3 7/7] examples: disable Rx packet type parsing pbhagavatula
2019-09-30 17:47 ` Aaron Conole [this message]
2019-10-01 5:02 ` Pavan Nikhilesh Bhagavatula
2019-10-01 6:34 ` [dpdk-dev] [PATCH v4 0/7] ethdev: add new Rx offload flags pbhagavatula
2019-10-01 6:34 ` [dpdk-dev] [PATCH v4 1/7] ethdev: add set ptype function pbhagavatula
2019-10-01 7:04 ` Andrew Rybchenko
2019-10-01 6:34 ` [dpdk-dev] [PATCH v4 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-10-01 6:34 ` [dpdk-dev] [PATCH v4 3/7] ethdev: add flow action type " pbhagavatula
2019-10-01 6:34 ` [dpdk-dev] [PATCH v4 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-01 6:34 ` [dpdk-dev] [PATCH v4 5/7] drivers/net: update Rx flow flag and mark capabilities pbhagavatula
2019-10-01 6:34 ` [dpdk-dev] [PATCH v4 6/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-10-01 6:34 ` [dpdk-dev] [PATCH v4 7/7] examples: disable Rx packet type parsing pbhagavatula
2019-10-01 6:41 ` [dpdk-dev] [PATCH v5 0/7] ethdev: add new Rx offload flags pbhagavatula
2019-10-01 6:41 ` [dpdk-dev] [PATCH v5 1/7] ethdev: add set ptype function pbhagavatula
2019-10-01 6:41 ` [dpdk-dev] [PATCH v5 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-10-01 6:41 ` [dpdk-dev] [PATCH v5 3/7] ethdev: add flow action type " pbhagavatula
2019-10-01 6:41 ` [dpdk-dev] [PATCH v5 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-01 7:10 ` Andrew Rybchenko
2019-10-01 11:50 ` Hemant Agrawal
2019-10-01 6:41 ` [dpdk-dev] [PATCH v5 5/7] drivers/net: update Rx flow flag and mark capabilities pbhagavatula
2019-10-01 7:11 ` Andrew Rybchenko
2019-10-01 6:41 ` [dpdk-dev] [PATCH v5 6/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-10-01 6:41 ` [dpdk-dev] [PATCH v5 7/7] examples: disable Rx packet type parsing pbhagavatula
2019-10-01 18:52 ` [dpdk-dev] [PATCH v6 0/7] ethdev: add new Rx offload flags pbhagavatula
2019-10-01 18:52 ` [dpdk-dev] [PATCH v6 1/7] ethdev: add set ptype function pbhagavatula
2019-10-01 18:52 ` [dpdk-dev] [PATCH v6 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-10-01 18:52 ` [dpdk-dev] [PATCH v6 3/7] ethdev: add flow action type " pbhagavatula
2019-10-01 18:52 ` [dpdk-dev] [PATCH v6 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-01 18:52 ` [dpdk-dev] [PATCH v6 5/7] drivers/net: update Rx flow flag and mark capabilities pbhagavatula
2019-10-01 18:52 ` [dpdk-dev] [PATCH v6 6/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-10-01 18:52 ` [dpdk-dev] [PATCH v6 7/7] examples: disable Rx packet type parsing pbhagavatula
2019-10-02 3:47 ` [dpdk-dev] [PATCH v5 0/7] ethdev: add new Rx offload flags pbhagavatula
2019-10-02 3:47 ` [dpdk-dev] [PATCH v7 1/7] ethdev: add set ptype function pbhagavatula
2019-10-02 13:37 ` Andrew Rybchenko
2019-10-02 13:41 ` Andrew Rybchenko
2019-10-02 3:47 ` [dpdk-dev] [PATCH v7 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-10-02 3:47 ` [dpdk-dev] [PATCH v7 3/7] ethdev: add flow action type " pbhagavatula
2019-10-02 3:47 ` [dpdk-dev] [PATCH v7 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-02 3:47 ` [dpdk-dev] [PATCH v7 5/7] drivers/net: update Rx flow flag and mark capabilities pbhagavatula
2019-10-02 9:52 ` Jerin Jacob
2019-10-02 3:47 ` [dpdk-dev] [PATCH v7 6/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-10-02 3:47 ` [dpdk-dev] [PATCH v7 7/7] examples: disable Rx packet type parsing pbhagavatula
2019-10-02 21:36 ` [dpdk-dev] [PATCH v8 0/7] ethdev: add new Rx offload flags pbhagavatula
2019-10-02 21:36 ` [dpdk-dev] [PATCH v8 1/7] ethdev: add set ptype function pbhagavatula
2019-10-03 7:40 ` Andrew Rybchenko
2019-10-03 17:15 ` Pavan Nikhilesh Bhagavatula
2019-10-02 21:36 ` [dpdk-dev] [PATCH v8 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-10-02 21:36 ` [dpdk-dev] [PATCH v8 3/7] ethdev: add flow action type " pbhagavatula
2019-10-02 21:36 ` [dpdk-dev] [PATCH v8 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-02 21:36 ` [dpdk-dev] [PATCH v8 5/7] drivers/net: update Rx flow flag and mark capabilities pbhagavatula
2019-10-02 21:36 ` [dpdk-dev] [PATCH v8 6/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-10-02 21:36 ` [dpdk-dev] [PATCH v8 7/7] examples: disable Rx packet type parsing pbhagavatula
2019-10-07 6:51 ` [dpdk-dev] [PATCH v9 0/7] ethdev: add new Rx offload flags pbhagavatula
2019-10-07 6:51 ` [dpdk-dev] [PATCH v9 1/7] ethdev: add set ptype function pbhagavatula
2019-10-08 14:48 ` Andrew Rybchenko
2019-10-07 6:51 ` [dpdk-dev] [PATCH v9 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-10-07 6:51 ` [dpdk-dev] [PATCH v9 3/7] ethdev: add flow action type " pbhagavatula
2019-10-07 6:51 ` [dpdk-dev] [PATCH v9 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-07 6:51 ` [dpdk-dev] [PATCH v9 5/7] drivers/net: update Rx flow flag and mark capabilities pbhagavatula
2019-10-07 6:51 ` [dpdk-dev] [PATCH v9 6/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-10-07 6:51 ` [dpdk-dev] [PATCH v9 7/7] examples: disable Rx packet type parsing pbhagavatula
2019-10-09 15:33 ` [dpdk-dev] [PATCH v10 0/7] ethdev: add new Rx offload flags pbhagavatula
2019-10-09 15:33 ` [dpdk-dev] [PATCH v10 1/7] ethdev: add set ptype function pbhagavatula
2019-10-10 8:46 ` Andrew Rybchenko
2019-10-09 15:33 ` [dpdk-dev] [PATCH v10 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-10-09 15:33 ` [dpdk-dev] [PATCH v10 3/7] ethdev: add flow action type " pbhagavatula
2019-10-09 15:33 ` [dpdk-dev] [PATCH v10 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-09 15:33 ` [dpdk-dev] [PATCH v10 5/7] drivers/net: update Rx flow flag and mark capabilities pbhagavatula
2019-10-09 15:33 ` [dpdk-dev] [PATCH v10 6/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-10-09 15:33 ` [dpdk-dev] [PATCH v10 7/7] examples: disable Rx packet type parsing pbhagavatula
2019-10-10 10:51 ` [dpdk-dev] [PATCH v11 0/7] ethdev: add new Rx offload flags pbhagavatula
2019-10-10 10:51 ` [dpdk-dev] [PATCH v11 1/7] ethdev: add set ptype function pbhagavatula
2019-10-10 10:51 ` [dpdk-dev] [PATCH v11 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-10-10 10:51 ` [dpdk-dev] [PATCH v11 3/7] ethdev: add flow action type " pbhagavatula
2019-10-10 10:51 ` [dpdk-dev] [PATCH v11 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-10 10:51 ` [dpdk-dev] [PATCH v11 5/7] drivers/net: update Rx flow flag and mark capabilities pbhagavatula
2019-10-10 10:51 ` [dpdk-dev] [PATCH v11 6/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-10-10 10:51 ` [dpdk-dev] [PATCH v11 7/7] examples: disable Rx packet type parsing pbhagavatula
2019-10-17 12:02 ` [dpdk-dev] [PATCH v12 0/7] ethdev: add new Rx offload flags pbhagavatula
2019-10-17 12:02 ` [dpdk-dev] [PATCH v12 1/7] ethdev: add set ptype function pbhagavatula
2019-10-17 12:02 ` [dpdk-dev] [PATCH v12 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-10-17 12:02 ` [dpdk-dev] [PATCH v12 3/7] ethdev: add flow action type " pbhagavatula
2019-10-17 12:02 ` [dpdk-dev] [PATCH v12 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-17 12:02 ` [dpdk-dev] [PATCH v12 5/7] drivers/net: update Rx flow flag and mark capabilities pbhagavatula
2019-10-17 12:02 ` [dpdk-dev] [PATCH v12 6/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-10-17 12:02 ` [dpdk-dev] [PATCH v12 7/7] examples: disable Rx packet type parsing pbhagavatula
2019-10-17 17:43 ` [dpdk-dev] [PATCH v12 0/7] ethdev: add new Rx offload flags Ferruh Yigit
2019-10-18 7:32 ` Andrew Rybchenko
2019-10-18 9:42 ` Ferruh Yigit
2019-10-18 10:31 ` Andrew Rybchenko
2019-10-21 15:06 ` Ferruh Yigit
2019-10-25 14:33 ` [dpdk-dev] [PATCH v13 0/6] " pbhagavatula
2019-10-25 14:33 ` [dpdk-dev] [PATCH v13 1/6] ethdev: add set ptype function pbhagavatula
2019-10-25 14:33 ` [dpdk-dev] [PATCH v13 2/6] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-10-25 14:33 ` [dpdk-dev] [PATCH v13 3/6] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-25 14:56 ` Andrew Rybchenko
2019-10-25 14:33 ` [dpdk-dev] [PATCH v13 4/6] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-10-25 14:33 ` [dpdk-dev] [PATCH v13 5/6] examples/l2fwd: disable ptype parsing pbhagavatula
2019-10-25 14:33 ` [dpdk-dev] [PATCH v13 6/6] app/testpmd: add command to set supported ptype mask pbhagavatula
2019-10-29 5:03 ` [dpdk-dev] [PATCH v14 0/6] ethdev: add new Rx offload flags pbhagavatula
2019-10-29 5:03 ` [dpdk-dev] [PATCH v14 1/7] ethdev: add set ptype function pbhagavatula
2019-10-29 5:03 ` [dpdk-dev] [PATCH v14 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-10-29 7:13 ` Andrew Rybchenko
2019-10-29 5:03 ` [dpdk-dev] [PATCH v14 3/7] ethdev: log offloads that can't be disabled by PMD pbhagavatula
2019-10-29 7:05 ` Andrew Rybchenko
2019-10-29 8:33 ` Pavan Nikhilesh Bhagavatula
2019-10-29 8:42 ` Andrew Rybchenko
2019-10-29 5:03 ` [dpdk-dev] [PATCH v14 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-29 7:21 ` Andrew Rybchenko
2019-10-29 5:03 ` [dpdk-dev] [PATCH v14 5/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-10-29 5:03 ` [dpdk-dev] [PATCH v14 6/7] examples/l2fwd: disable ptype parsing pbhagavatula
2019-10-29 5:03 ` [dpdk-dev] [PATCH v14 7/7] app/testpmd: add command to set supported ptype mask pbhagavatula
2019-10-29 15:37 ` [dpdk-dev] [PATCH v15 0/7] ethdev: add new Rx offload flags pbhagavatula
2019-10-29 15:37 ` [dpdk-dev] [PATCH v15 1/7] ethdev: add set ptype function pbhagavatula
2019-10-31 13:39 ` Thomas Monjalon
2019-10-29 15:37 ` [dpdk-dev] [PATCH v15 2/7] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-10-31 13:43 ` Thomas Monjalon
2019-10-29 15:37 ` [dpdk-dev] [PATCH v15 3/7] ethdev: add validation to offloads set by PMD pbhagavatula
2019-10-29 16:53 ` Andrew Rybchenko
2019-10-29 17:25 ` [dpdk-dev] [EXT] " Pavan Nikhilesh Bhagavatula
2019-10-31 13:45 ` [dpdk-dev] " Thomas Monjalon
2019-10-31 13:58 ` Thomas Monjalon
2019-10-31 16:44 ` [dpdk-dev] [EXT] " Pavan Nikhilesh Bhagavatula
2019-11-01 22:50 ` Thomas Monjalon
2019-10-31 15:13 ` [dpdk-dev] " Matan Azrad
2019-10-31 15:18 ` Pavan Nikhilesh Bhagavatula
2019-10-31 15:50 ` Matan Azrad
2019-10-31 16:33 ` Pavan Nikhilesh Bhagavatula
2019-11-01 11:04 ` Andrew Rybchenko
2019-11-03 6:57 ` Matan Azrad
2019-11-03 12:12 ` Andrew Rybchenko
2019-11-03 15:16 ` Matan Azrad
2019-11-05 12:48 ` Andrew Rybchenko
2019-11-05 14:05 ` Matan Azrad
2019-11-05 14:37 ` Andrew Rybchenko
2019-11-06 6:58 ` Matan Azrad
2019-11-06 8:12 ` Andrew Rybchenko
2019-11-07 6:56 ` Matan Azrad
2019-11-08 10:12 ` Andrew Rybchenko
2019-11-08 10:29 ` Matan Azrad
2019-11-08 11:24 ` Andrew Rybchenko
2019-11-08 11:48 ` Matan Azrad
2019-11-08 12:09 ` Andrew Rybchenko
2019-11-08 12:59 ` Thomas Monjalon
2019-10-29 15:37 ` [dpdk-dev] [PATCH v15 4/7] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-10-31 14:03 ` Thomas Monjalon
2019-10-31 16:51 ` Pavan Nikhilesh Bhagavatula
2019-11-01 11:11 ` Andrew Rybchenko
2019-11-01 22:22 ` Thomas Monjalon
2019-11-01 17:49 ` Liron Himi
2019-11-03 12:06 ` Andrew Rybchenko
2019-11-03 14:06 ` [dpdk-dev] [EXT] " Liron Himi
2019-10-29 15:37 ` [dpdk-dev] [PATCH v15 5/7] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-10-31 14:05 ` Thomas Monjalon
2019-10-29 15:37 ` [dpdk-dev] [PATCH v15 6/7] examples/l2fwd: disable ptype parsing pbhagavatula
2019-10-29 15:37 ` [dpdk-dev] [PATCH v15 7/7] app/testpmd: add command to set supported ptype mask pbhagavatula
2019-10-31 10:33 ` Iremonger, Bernard
2019-11-06 18:13 ` Pavan Nikhilesh Bhagavatula
2019-11-06 19:17 ` [dpdk-dev] [PATCH v16 0/8] ethdev: add new Rx offload flags pbhagavatula
2019-11-06 19:17 ` [dpdk-dev] [PATCH v16 1/8] ethdev: add set ptype function pbhagavatula
2019-11-07 18:28 ` Ferruh Yigit
2019-11-08 9:05 ` Andrew Rybchenko
2019-11-08 9:52 ` Ferruh Yigit
2019-11-08 10:24 ` Andrew Rybchenko
2019-11-08 11:05 ` Ferruh Yigit
2019-11-08 11:40 ` Andrew Rybchenko
2019-11-06 19:17 ` [dpdk-dev] [PATCH v16 2/8] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-11-07 17:24 ` Ferruh Yigit
2019-11-10 14:43 ` Pavan Nikhilesh Bhagavatula
2019-11-06 19:17 ` [dpdk-dev] [PATCH v16 3/8] ethdev: add validation to offloads set by PMD pbhagavatula
2019-11-07 16:51 ` Ferruh Yigit
2019-11-06 19:17 ` [dpdk-dev] [PATCH v16 4/8] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-11-07 16:48 ` Ferruh Yigit
2019-11-07 17:22 ` Ferruh Yigit
2019-11-08 8:48 ` Andrew Rybchenko
2019-11-14 14:01 ` Ferruh Yigit
2019-11-06 19:17 ` [dpdk-dev] [PATCH v16 5/8] examples/eventdev_pipeline: split port init sequence pbhagavatula
2019-11-06 19:18 ` [dpdk-dev] [PATCH v16 6/8] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-11-06 19:18 ` [dpdk-dev] [PATCH v16 7/8] examples/l2fwd: disable ptype parsing pbhagavatula
2019-11-07 17:59 ` Ferruh Yigit
2019-11-07 18:30 ` Ferruh Yigit
2019-11-06 19:18 ` [dpdk-dev] [PATCH v16 8/8] app/testpmd: add command to set supported ptype mask pbhagavatula
2019-11-07 11:57 ` Iremonger, Bernard
2019-11-07 12:27 ` Iremonger, Bernard
2019-11-07 14:36 ` Pavan Nikhilesh Bhagavatula
2019-11-07 15:00 ` Iremonger, Bernard
2019-11-07 18:40 ` Ferruh Yigit
2019-11-07 18:55 ` Jerin Jacob
2019-11-07 19:40 ` Ferruh Yigit
2019-11-08 4:13 ` Jerin Jacob
2019-11-08 13:54 ` Ananyev, Konstantin
2019-11-08 15:01 ` Jerin Jacob
2019-11-11 4:56 ` [dpdk-dev] [EXT] " Pavan Nikhilesh Bhagavatula
2019-11-11 5:02 ` Jerin Jacob
2019-11-11 10:44 ` Ferruh Yigit
2019-11-11 13:19 ` [dpdk-dev] [PATCH v17 00/10] ethdev: add new Rx offload flags pbhagavatula
2019-11-11 13:19 ` [dpdk-dev] [PATCH v17 01/10] ethdev: add set ptype function pbhagavatula
2019-11-11 13:19 ` [dpdk-dev] [PATCH v17 02/10] ethdev: add mbuf RSS update as an offload pbhagavatula
2019-11-13 18:04 ` Ferruh Yigit
2019-11-11 13:19 ` [dpdk-dev] [PATCH v17 03/10] ethdev: add validation to offloads set by PMD pbhagavatula
2019-11-13 18:10 ` Ferruh Yigit
2019-11-11 13:19 ` [dpdk-dev] [PATCH v17 04/10] drivers/net: update Rx RSS hash offload capabilities pbhagavatula
2019-11-11 15:05 ` Ferruh Yigit
2019-11-11 15:10 ` Pavan Nikhilesh Bhagavatula
2019-11-13 18:02 ` Ferruh Yigit
2019-11-14 12:52 ` Ferruh Yigit
2019-11-14 12:57 ` Jerin Jacob
2019-11-14 13:24 ` Andrew Rybchenko
2019-11-14 13:59 ` Ferruh Yigit
2019-11-14 14:14 ` Ferruh Yigit
2019-11-11 13:19 ` [dpdk-dev] [PATCH v17 05/10] examples/eventdev_pipeline: split port init sequence pbhagavatula
2019-11-11 13:19 ` [dpdk-dev] [PATCH v17 06/10] examples/eventdev_pipeline: add new Rx RSS hash offload pbhagavatula
2019-11-11 13:19 ` [dpdk-dev] [PATCH v17 07/10] examples/l2fwd: disable ptype parsing pbhagavatula
2019-11-11 13:19 ` [dpdk-dev] [PATCH v17 08/10] app/testpmd: add command to set supported ptype mask pbhagavatula
2019-11-11 14:51 ` Ferruh Yigit
2019-11-11 13:19 ` [dpdk-dev] [PATCH v17 09/10] app/testpmd: disable packet type parsing by default pbhagavatula
2019-11-11 14:54 ` Ferruh Yigit
2019-11-11 13:19 ` [dpdk-dev] [PATCH v17 10/10] app/testpmd: add RSS hash offload to port Rx offload cmd pbhagavatula
2019-11-11 15:45 ` [dpdk-dev] [PATCH v17 00/10] ethdev: add new Rx offload flags Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f7tk19p7k2m.fsf@dhcp-25.97.bos.redhat.com \
--to=aconole@redhat.com \
--cc=akhil.goyal@nxp.com \
--cc=arybchenko@solarflare.com \
--cc=bernard.iremonger@intel.com \
--cc=bruce.richardson@intel.com \
--cc=byron.marohn@intel.com \
--cc=chas3@att.com \
--cc=cristian.dumitrescu@intel.com \
--cc=david.hunt@intel.com \
--cc=declan.doherty@intel.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=harry.van.haaren@intel.com \
--cc=jasvinder.singh@intel.com \
--cc=jerinj@marvell.com \
--cc=john.mcnamara@intel.com \
--cc=konstantin.ananyev@intel.com \
--cc=marko.kovacevic@intel.com \
--cc=maxime.coquelin@redhat.com \
--cc=nicolas.chautru@intel.com \
--cc=orika@mellanox.com \
--cc=pbhagavatula@marvell.com \
--cc=radu.nicolau@intel.com \
--cc=reshma.pattan@intel.com \
--cc=tiwei.bie@intel.com \
--cc=tomasz.kantecki@intel.com \
--cc=xiaoyun.li@intel.com \
--cc=yipeng1.wang@intel.com \
--cc=zhihong.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.