All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PULL 21/68] hw/timer/imx_gpt.c: Switch to transaction-based ptimer API
Date: Mon, 14 Oct 2019 17:03:17 +0100	[thread overview]
Message-ID: <20191014160404.19553-22-peter.maydell@linaro.org> (raw)
In-Reply-To: <20191014160404.19553-1-peter.maydell@linaro.org>

Switch the imx_epit.c code away from bottom-half based ptimers to
the new transaction-based ptimer API.  This just requires adding
begin/commit calls around the various places that modify the ptimer
state, and using the new ptimer_init() function to create the timer.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191008171740.9679-19-peter.maydell@linaro.org
---
 hw/timer/imx_gpt.c | 21 +++++++++++++++++----
 1 file changed, 17 insertions(+), 4 deletions(-)

diff --git a/hw/timer/imx_gpt.c b/hw/timer/imx_gpt.c
index c535d191292..5c0d9a269ce 100644
--- a/hw/timer/imx_gpt.c
+++ b/hw/timer/imx_gpt.c
@@ -16,7 +16,6 @@
 #include "hw/irq.h"
 #include "hw/timer/imx_gpt.h"
 #include "migration/vmstate.h"
-#include "qemu/main-loop.h"
 #include "qemu/module.h"
 #include "qemu/log.h"
 
@@ -127,6 +126,7 @@ static const IMXClk imx7_gpt_clocks[] = {
     CLK_NONE,      /* 111 not defined */
 };
 
+/* Must be called from within ptimer_transaction_begin/commit block */
 static void imx_gpt_set_freq(IMXGPTState *s)
 {
     uint32_t clksrc = extract32(s->cr, GPT_CR_CLKSRC_SHIFT, 3);
@@ -167,6 +167,7 @@ static inline uint32_t imx_gpt_find_limit(uint32_t count, uint32_t reg,
     return timeout;
 }
 
+/* Must be called from within ptimer_transaction_begin/commit block */
 static void imx_gpt_compute_next_timeout(IMXGPTState *s, bool event)
 {
     uint32_t timeout = GPT_TIMER_MAX;
@@ -313,6 +314,7 @@ static uint64_t imx_gpt_read(void *opaque, hwaddr offset, unsigned size)
 
 static void imx_gpt_reset_common(IMXGPTState *s, bool is_soft_reset)
 {
+    ptimer_transaction_begin(s->timer);
     /* stop timer */
     ptimer_stop(s->timer);
 
@@ -350,6 +352,7 @@ static void imx_gpt_reset_common(IMXGPTState *s, bool is_soft_reset)
     if (s->freq && (s->cr & GPT_CR_EN)) {
         ptimer_run(s->timer, 1);
     }
+    ptimer_transaction_commit(s->timer);
 }
 
 static void imx_gpt_soft_reset(DeviceState *dev)
@@ -382,6 +385,7 @@ static void imx_gpt_write(void *opaque, hwaddr offset, uint64_t value,
             imx_gpt_soft_reset(DEVICE(s));
         } else {
             /* set our freq, as the source might have changed */
+            ptimer_transaction_begin(s->timer);
             imx_gpt_set_freq(s);
 
             if ((oldreg ^ s->cr) & GPT_CR_EN) {
@@ -397,12 +401,15 @@ static void imx_gpt_write(void *opaque, hwaddr offset, uint64_t value,
                     ptimer_stop(s->timer);
                 }
             }
+            ptimer_transaction_commit(s->timer);
         }
         break;
 
     case 1: /* Prescaler */
         s->pr = value & 0xfff;
+        ptimer_transaction_begin(s->timer);
         imx_gpt_set_freq(s);
+        ptimer_transaction_commit(s->timer);
         break;
 
     case 2: /* SR */
@@ -414,13 +421,16 @@ static void imx_gpt_write(void *opaque, hwaddr offset, uint64_t value,
         s->ir = value & 0x3f;
         imx_gpt_update_int(s);
 
+        ptimer_transaction_begin(s->timer);
         imx_gpt_compute_next_timeout(s, false);
+        ptimer_transaction_commit(s->timer);
 
         break;
 
     case 4: /* OCR1 -- output compare register */
         s->ocr1 = value;
 
+        ptimer_transaction_begin(s->timer);
         /* In non-freerun mode, reset count when this register is written */
         if (!(s->cr & GPT_CR_FRR)) {
             s->next_timeout = GPT_TIMER_MAX;
@@ -429,6 +439,7 @@ static void imx_gpt_write(void *opaque, hwaddr offset, uint64_t value,
 
         /* compute the new timeout */
         imx_gpt_compute_next_timeout(s, false);
+        ptimer_transaction_commit(s->timer);
 
         break;
 
@@ -436,7 +447,9 @@ static void imx_gpt_write(void *opaque, hwaddr offset, uint64_t value,
         s->ocr2 = value;
 
         /* compute the new timeout */
+        ptimer_transaction_begin(s->timer);
         imx_gpt_compute_next_timeout(s, false);
+        ptimer_transaction_commit(s->timer);
 
         break;
 
@@ -444,7 +457,9 @@ static void imx_gpt_write(void *opaque, hwaddr offset, uint64_t value,
         s->ocr3 = value;
 
         /* compute the new timeout */
+        ptimer_transaction_begin(s->timer);
         imx_gpt_compute_next_timeout(s, false);
+        ptimer_transaction_commit(s->timer);
 
         break;
 
@@ -484,15 +499,13 @@ static void imx_gpt_realize(DeviceState *dev, Error **errp)
 {
     IMXGPTState *s = IMX_GPT(dev);
     SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
-    QEMUBH *bh;
 
     sysbus_init_irq(sbd, &s->irq);
     memory_region_init_io(&s->iomem, OBJECT(s), &imx_gpt_ops, s, TYPE_IMX_GPT,
                           0x00001000);
     sysbus_init_mmio(sbd, &s->iomem);
 
-    bh = qemu_bh_new(imx_gpt_timeout, s);
-    s->timer = ptimer_init_with_bh(bh, PTIMER_POLICY_DEFAULT);
+    s->timer = ptimer_init(imx_gpt_timeout, s, PTIMER_POLICY_DEFAULT);
 }
 
 static void imx_gpt_class_init(ObjectClass *klass, void *data)
-- 
2.20.1



  parent reply	other threads:[~2019-10-14 16:41 UTC|newest]

Thread overview: 76+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-14 16:02 [PULL 00/68] target-arm queue Peter Maydell
2019-10-14 16:02 ` [PULL 01/68] linux headers: update against v5.4-rc1 Peter Maydell
2019-10-14 16:02 ` [PULL 02/68] intc/arm_gic: Support IRQ injection for more than 256 vpus Peter Maydell
2019-10-14 16:02 ` [PULL 03/68] ARM: KVM: Check KVM_CAP_ARM_IRQ_LINE_LAYOUT_2 for smp_cpus > 256 Peter Maydell
2019-10-14 16:03 ` [PULL 04/68] ptimer: Rename ptimer_init() to ptimer_init_with_bh() Peter Maydell
2019-10-14 16:03 ` [PULL 05/68] ptimer: Provide new transaction-based API Peter Maydell
2019-10-14 16:03 ` [PULL 06/68] tests/ptimer-test: Switch to transaction-based ptimer API Peter Maydell
2019-10-14 16:03 ` [PULL 07/68] hw/timer/arm_timer.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 08/68] hw/arm/musicpal.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 09/68] hw/timer/allwinner-a10-pit.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 10/68] hw/timer/arm_mptimer.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 11/68] hw/timer/cmsdk-apb-dualtimer.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 12/68] hw/timer/cmsdk-apb-timer.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 13/68] hw/timer/digic-timer.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 14/68] hw/timer/exynos4210_mct.c: Switch GFRC " Peter Maydell
2019-10-14 16:03 ` [PULL 15/68] hw/timer/exynos4210_mct.c: Switch LFRC " Peter Maydell
2019-10-14 16:03 ` [PULL 16/68] hw/timer/exynos4210_mct.c: Switch ltick " Peter Maydell
2019-10-14 16:03 ` [PULL 17/68] hw/timer/exynos4210_pwm.c: Switch " Peter Maydell
2019-10-14 16:03 ` [PULL 18/68] hw/timer/exynos4210_rtc.c: Switch 1Hz ptimer to transaction-based API Peter Maydell
2019-10-14 16:03 ` [PULL 19/68] hw/timer/exynos4210_rtc.c: Switch main " Peter Maydell
2019-10-14 16:03 ` [PULL 20/68] hw/timer/imx_epit.c: Switch to transaction-based ptimer API Peter Maydell
2019-10-14 16:03 ` Peter Maydell [this message]
2019-10-14 16:03 ` [PULL 22/68] hw/timer/mss-timerc: " Peter Maydell
2019-10-14 16:03 ` [PULL 23/68] hw/watchdog/cmsdk-apb-watchdog.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 24/68] hw/net/lan9118.c: " Peter Maydell
2019-10-14 16:03 ` [PULL 25/68] target/arm/arm-semi: Capture errno in softmmu version of set_swi_errno() Peter Maydell
2019-10-14 16:03 ` [PULL 26/68] target/arm/arm-semi: Always set some kind of errno for failed calls Peter Maydell
2019-10-14 16:03 ` [PULL 27/68] target/arm/arm-semi: Correct comment about gdb syscall races Peter Maydell
2019-10-14 16:03 ` [PULL 28/68] target/arm/arm-semi: Make semihosting code hand out its own file descriptors Peter Maydell
2019-10-14 16:03 ` [PULL 29/68] target/arm/arm-semi: Restrict use of TaskState* Peter Maydell
2019-10-14 16:03 ` [PULL 30/68] target/arm/arm-semi: Use set_swi_errno() in gdbstub callback functions Peter Maydell
2019-10-14 16:03 ` [PULL 31/68] target/arm/arm-semi: Factor out implementation of SYS_CLOSE Peter Maydell
2019-10-14 16:03 ` [PULL 32/68] target/arm/arm-semi: Factor out implementation of SYS_WRITE Peter Maydell
2019-10-14 16:03 ` [PULL 33/68] target/arm/arm-semi: Factor out implementation of SYS_READ Peter Maydell
2019-10-14 16:03 ` [PULL 34/68] target/arm/arm-semi: Factor out implementation of SYS_ISTTY Peter Maydell
2019-10-14 16:03 ` [PULL 35/68] target/arm/arm-semi: Factor out implementation of SYS_SEEK Peter Maydell
2019-10-14 16:03 ` [PULL 36/68] target/arm/arm-semi: Factor out implementation of SYS_FLEN Peter Maydell
2019-10-14 16:03 ` [PULL 37/68] target/arm/arm-semi: Implement support for semihosting feature detection Peter Maydell
2019-10-14 16:03 ` [PULL 38/68] target/arm/arm-semi: Implement SH_EXT_EXIT_EXTENDED extension Peter Maydell
2019-10-14 16:03 ` [PULL 39/68] target/arm/arm-semi: Implement SH_EXT_STDOUT_STDERR extension Peter Maydell
2019-10-14 16:03 ` [PULL 40/68] aspeed/wdt: Check correct register for clock source Peter Maydell
2019-10-14 16:03 ` [PULL 41/68] hw/sd/aspeed_sdhci: New device Peter Maydell
2019-10-14 16:03 ` [PULL 42/68] hw: aspeed_scu: Add AST2600 support Peter Maydell
2019-10-14 16:03 ` [PULL 43/68] aspeed/timer: Introduce an object class per SoC Peter Maydell
2019-10-14 16:03 ` [PULL 44/68] aspeed/timer: Add support for control register 3 Peter Maydell
2019-10-14 16:03 ` [PULL 45/68] aspeed/timer: Add AST2600 support Peter Maydell
2019-10-14 16:03 ` [PULL 46/68] aspeed/timer: Add support for IRQ status register on the AST2600 Peter Maydell
2019-10-14 16:03 ` [PULL 47/68] aspeed/sdmc: Introduce an object class per SoC Peter Maydell
2019-10-14 16:03 ` [PULL 48/68] aspeed/sdmc: Add AST2600 support Peter Maydell
2019-10-14 16:03 ` [PULL 49/68] watchdog/aspeed: Introduce an object class per SoC Peter Maydell
2019-10-14 16:03 ` [PULL 50/68] hw: wdt_aspeed: Add AST2600 support Peter Maydell
2019-10-14 16:03 ` [PULL 51/68] aspeed/smc: Introduce segment operations Peter Maydell
2019-10-14 16:03 ` [PULL 52/68] aspeed/smc: Add AST2600 support Peter Maydell
2019-10-14 16:03 ` [PULL 53/68] hw/gpio: Add in AST2600 specific implementation Peter Maydell
2019-10-14 16:03 ` [PULL 54/68] aspeed/i2c: Introduce an object class per SoC Peter Maydell
2019-10-14 16:03 ` [PULL 55/68] aspeed/i2c: Add AST2600 support Peter Maydell
2019-10-14 16:03 ` [PULL 56/68] aspeed: Introduce an object class per SoC Peter Maydell
2019-10-14 16:03 ` [PULL 57/68] aspeed/soc: Add AST2600 support Peter Maydell
2019-10-14 16:03 ` [PULL 58/68] m25p80: Add support for w25q512jv Peter Maydell
2019-10-14 16:03 ` [PULL 59/68] aspeed: Add an AST2600 eval board Peter Maydell
2019-10-15 17:03   ` Peter Maydell
2019-10-15 17:43     ` Cédric Le Goater
2019-10-15 17:55       ` Peter Maydell
2019-10-16 11:28         ` Joel Stanley
2019-10-16 12:20     ` Philippe Mathieu-Daudé
2019-10-16 12:41       ` Cédric Le Goater
2019-10-16 12:44         ` Philippe Mathieu-Daudé
2019-10-14 16:03 ` [PULL 60/68] aspeed: Parameterise number of MACs Peter Maydell
2019-10-14 16:03 ` [PULL 61/68] aspeed: add support for the Aspeed MII controller of the AST2600 Peter Maydell
2019-10-14 16:03 ` [PULL 62/68] aspeed/soc: Add ASPEED Video stub Peter Maydell
2019-10-14 16:03 ` [PULL 63/68] hw/arm/raspi: Use the IEC binary prefix definitions Peter Maydell
2019-10-14 16:04 ` [PULL 64/68] hw/arm/bcm2835_peripherals: Improve logging Peter Maydell
2019-10-14 16:04 ` [PULL 65/68] hw/arm/bcm2835_peripherals: Name various address spaces Peter Maydell
2019-10-14 16:04 ` [PULL 66/68] hw/arm/bcm2835: Rename some definitions Peter Maydell
2019-10-14 16:04 ` [PULL 67/68] hw/arm/bcm2835: Add various unimplemented peripherals Peter Maydell
2019-10-14 16:04 ` [PULL 68/68] hw/misc/bcm2835_mbox: Add trace events Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191014160404.19553-22-peter.maydell@linaro.org \
    --to=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.