[PULL 53/68] hw/gpio: Add in AST2600 specific implementation

[Peter Maydell <peter.maydell@linaro.org>]

From: Rashmica Gupta <rashmica.g@gmail.com>

The AST2600 has the same sets of 3.6v gpios as the AST2400 plus an
addtional two sets of 1.8V gpios.

Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Joel Stanley <joel@jms.id.au>
Message-id: 20190925143248.10000-15-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/gpio/aspeed_gpio.c | 142 ++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 137 insertions(+), 5 deletions(-)

diff --git a/hw/gpio/aspeed_gpio.c b/hw/gpio/aspeed_gpio.c
index 25fbfec3b84..196e47c2628 100644
--- a/hw/gpio/aspeed_gpio.c
+++ b/hw/gpio/aspeed_gpio.c
@@ -169,6 +169,48 @@
 #define GPIO_3_6V_MEM_SIZE         0x1F0
 #define GPIO_3_6V_REG_ARRAY_SIZE   (GPIO_3_6V_MEM_SIZE >> 2)
 
+/* AST2600 only - 1.8V gpios */
+/*
+ * The AST2600 has same 3.6V gpios as the AST2400 (memory offsets 0x0-0x198)
+ * and addtional 1.8V gpios (memory offsets 0x800-0x9D4).
+ */
+#define GPIO_1_8V_REG_OFFSET          0x800
+#define GPIO_1_8V_ABCD_DATA_VALUE     ((0x800 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_ABCD_DIRECTION      ((0x804 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_ABCD_INT_ENABLE     ((0x808 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_ABCD_INT_SENS_0     ((0x80C - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_ABCD_INT_SENS_1     ((0x810 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_ABCD_INT_SENS_2     ((0x814 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_ABCD_INT_STATUS     ((0x818 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_ABCD_RESET_TOLERANT ((0x81C - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_E_DATA_VALUE        ((0x820 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_E_DIRECTION         ((0x824 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_E_INT_ENABLE        ((0x828 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_E_INT_SENS_0        ((0x82C - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_E_INT_SENS_1        ((0x830 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_E_INT_SENS_2        ((0x834 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_E_INT_STATUS        ((0x838 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_E_RESET_TOLERANT    ((0x83C - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_ABCD_DEBOUNCE_1     ((0x840 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_ABCD_DEBOUNCE_2     ((0x844 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_E_DEBOUNCE_1        ((0x848 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_E_DEBOUNCE_2        ((0x84C - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_DEBOUNCE_TIME_1     ((0x850 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_DEBOUNCE_TIME_2     ((0x854 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_DEBOUNCE_TIME_3     ((0x858 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_ABCD_COMMAND_SRC_0  ((0x860 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_ABCD_COMMAND_SRC_1  ((0x864 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_E_COMMAND_SRC_0     ((0x868 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_E_COMMAND_SRC_1     ((0x86C - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_ABCD_DATA_READ      ((0x8C0 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_E_DATA_READ         ((0x8C4 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_ABCD_INPUT_MASK     ((0x9D0 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_E_INPUT_MASK        ((0x9D4 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_MEM_SIZE            0x9D8
+#define GPIO_1_8V_REG_ARRAY_SIZE      ((GPIO_1_8V_MEM_SIZE - \
+                                      GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_MAX_MEM_SIZE           MAX(GPIO_3_6V_MEM_SIZE, GPIO_1_8V_MEM_SIZE)
+
 static int aspeed_evaluate_irq(GPIOSets *regs, int gpio_prev_high, int gpio)
 {
     uint32_t falling_edge = 0, rising_edge = 0;
@@ -465,6 +507,39 @@ static const AspeedGPIOReg aspeed_3_6v_gpios[GPIO_3_6V_REG_ARRAY_SIZE] = {
     [GPIO_AC_INPUT_MASK] =         { 7, gpio_reg_input_mask },
 };
 
+static const AspeedGPIOReg aspeed_1_8v_gpios[GPIO_1_8V_REG_ARRAY_SIZE] = {
+    /* 1.8V Set ABCD */
+    [GPIO_1_8V_ABCD_DATA_VALUE] =     {0, gpio_reg_data_value},
+    [GPIO_1_8V_ABCD_DIRECTION] =      {0, gpio_reg_direction},
+    [GPIO_1_8V_ABCD_INT_ENABLE] =     {0, gpio_reg_int_enable},
+    [GPIO_1_8V_ABCD_INT_SENS_0] =     {0, gpio_reg_int_sens_0},
+    [GPIO_1_8V_ABCD_INT_SENS_1] =     {0, gpio_reg_int_sens_1},
+    [GPIO_1_8V_ABCD_INT_SENS_2] =     {0, gpio_reg_int_sens_2},
+    [GPIO_1_8V_ABCD_INT_STATUS] =     {0, gpio_reg_int_status},
+    [GPIO_1_8V_ABCD_RESET_TOLERANT] = {0, gpio_reg_reset_tolerant},
+    [GPIO_1_8V_ABCD_DEBOUNCE_1] =     {0, gpio_reg_debounce_1},
+    [GPIO_1_8V_ABCD_DEBOUNCE_2] =     {0, gpio_reg_debounce_2},
+    [GPIO_1_8V_ABCD_COMMAND_SRC_0] =  {0, gpio_reg_cmd_source_0},
+    [GPIO_1_8V_ABCD_COMMAND_SRC_1] =  {0, gpio_reg_cmd_source_1},
+    [GPIO_1_8V_ABCD_DATA_READ] =      {0, gpio_reg_data_read},
+    [GPIO_1_8V_ABCD_INPUT_MASK] =     {0, gpio_reg_input_mask},
+    /* 1.8V Set E */
+    [GPIO_1_8V_E_DATA_VALUE] =     {1, gpio_reg_data_value},
+    [GPIO_1_8V_E_DIRECTION] =      {1, gpio_reg_direction},
+    [GPIO_1_8V_E_INT_ENABLE] =     {1, gpio_reg_int_enable},
+    [GPIO_1_8V_E_INT_SENS_0] =     {1, gpio_reg_int_sens_0},
+    [GPIO_1_8V_E_INT_SENS_1] =     {1, gpio_reg_int_sens_1},
+    [GPIO_1_8V_E_INT_SENS_2] =     {1, gpio_reg_int_sens_2},
+    [GPIO_1_8V_E_INT_STATUS] =     {1, gpio_reg_int_status},
+    [GPIO_1_8V_E_RESET_TOLERANT] = {1, gpio_reg_reset_tolerant},
+    [GPIO_1_8V_E_DEBOUNCE_1] =     {1, gpio_reg_debounce_1},
+    [GPIO_1_8V_E_DEBOUNCE_2] =     {1, gpio_reg_debounce_2},
+    [GPIO_1_8V_E_COMMAND_SRC_0] =  {1, gpio_reg_cmd_source_0},
+    [GPIO_1_8V_E_COMMAND_SRC_1] =  {1, gpio_reg_cmd_source_1},
+    [GPIO_1_8V_E_DATA_READ] =      {1, gpio_reg_data_read},
+    [GPIO_1_8V_E_INPUT_MASK] =     {1, gpio_reg_input_mask},
+};
+
 static uint64_t aspeed_gpio_read(void *opaque, hwaddr offset, uint32_t size)
 {
     AspeedGPIOState *s = ASPEED_GPIO(opaque);
@@ -663,8 +738,11 @@ static void aspeed_gpio_get_pin(Object *obj, Visitor *v, const char *name,
     int set_idx, group_idx = 0;
 
     if (sscanf(name, "gpio%2[A-Z]%1d", group, &pin) != 2) {
-        error_setg(errp, "%s: error reading %s", __func__, name);
-        return;
+        /* 1.8V gpio */
+        if (sscanf(name, "gpio%3s%1d", group, &pin) != 2) {
+            error_setg(errp, "%s: error reading %s", __func__, name);
+            return;
+        }
     }
     set_idx = get_set_idx(s, group, &group_idx);
     if (set_idx == -1) {
@@ -692,8 +770,11 @@ static void aspeed_gpio_set_pin(Object *obj, Visitor *v, const char *name,
         return;
     }
     if (sscanf(name, "gpio%2[A-Z]%1d", group, &pin) != 2) {
-        error_setg(errp, "%s: error reading %s", __func__, name);
-        return;
+        /* 1.8V gpio */
+        if (sscanf(name, "gpio%3s%1d", group, &pin) != 2) {
+            error_setg(errp, "%s: error reading %s", __func__, name);
+            return;
+        }
     }
     set_idx = get_set_idx(s, group, &group_idx);
     if (set_idx == -1) {
@@ -726,6 +807,21 @@ static const GPIOSetProperties ast2500_set_props[] = {
     [7] = {0x000000ff,  0x000000ff,  {"AC"} },
 };
 
+static GPIOSetProperties ast2600_3_6v_set_props[] = {
+    [0] = {0xffffffff,  0xffffffff,  {"A", "B", "C", "D"} },
+    [1] = {0xffffffff,  0xffffffff,  {"E", "F", "G", "H"} },
+    [2] = {0xffffffff,  0xffffffff,  {"I", "J", "K", "L"} },
+    [3] = {0xffffffff,  0xffffffff,  {"M", "N", "O", "P"} },
+    [4] = {0xffffffff,  0xffffffff,  {"Q", "R", "S", "T"} },
+    [5] = {0xffffffff,  0x0000ffff,  {"U", "V", "W", "X"} },
+    [6] = {0xffff0000,  0x0fff0000,  {"Y", "Z", "", ""} },
+};
+
+static GPIOSetProperties ast2600_1_8v_set_props[] = {
+    [0] = {0xffffffff,  0xffffffff,  {"18A", "18B", "18C", "18D"} },
+    [1] = {0x0000000f,  0x0000000f,  {"18E"} },
+};
+
 static const MemoryRegionOps aspeed_gpio_ops = {
     .read       = aspeed_gpio_read,
     .write      = aspeed_gpio_write,
@@ -758,7 +854,7 @@ static void aspeed_gpio_realize(DeviceState *dev, Error **errp)
     }
 
     memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_gpio_ops, s,
-            TYPE_ASPEED_GPIO, GPIO_3_6V_MEM_SIZE);
+            TYPE_ASPEED_GPIO, GPIO_MAX_MEM_SIZE);
 
     sysbus_init_mmio(sbd, &s->iomem);
 }
@@ -851,6 +947,26 @@ static void aspeed_gpio_2500_class_init(ObjectClass *klass, void *data)
     agc->reg_table = aspeed_3_6v_gpios;
 }
 
+static void aspeed_gpio_ast2600_3_6v_class_init(ObjectClass *klass, void *data)
+{
+    AspeedGPIOClass *agc = ASPEED_GPIO_CLASS(klass);
+
+    agc->props = ast2600_3_6v_set_props;
+    agc->nr_gpio_pins = 208;
+    agc->nr_gpio_sets = 7;
+    agc->reg_table = aspeed_3_6v_gpios;
+}
+
+static void aspeed_gpio_ast2600_1_8v_class_init(ObjectClass *klass, void *data)
+{
+    AspeedGPIOClass *agc = ASPEED_GPIO_CLASS(klass);
+
+    agc->props = ast2600_1_8v_set_props;
+    agc->nr_gpio_pins = 36;
+    agc->nr_gpio_sets = 2;
+    agc->reg_table = aspeed_1_8v_gpios;
+}
+
 static const TypeInfo aspeed_gpio_info = {
     .name           = TYPE_ASPEED_GPIO,
     .parent         = TYPE_SYS_BUS_DEVICE,
@@ -874,11 +990,27 @@ static const TypeInfo aspeed_gpio_ast2500_info = {
     .instance_init  = aspeed_gpio_init,
 };
 
+static const TypeInfo aspeed_gpio_ast2600_3_6v_info = {
+    .name           = TYPE_ASPEED_GPIO "-ast2600",
+    .parent         = TYPE_ASPEED_GPIO,
+    .class_init     = aspeed_gpio_ast2600_3_6v_class_init,
+    .instance_init  = aspeed_gpio_init,
+};
+
+static const TypeInfo aspeed_gpio_ast2600_1_8v_info = {
+    .name           = TYPE_ASPEED_GPIO "-ast2600-1_8v",
+    .parent         = TYPE_ASPEED_GPIO,
+    .class_init     = aspeed_gpio_ast2600_1_8v_class_init,
+    .instance_init  = aspeed_gpio_init,
+};
+
 static void aspeed_gpio_register_types(void)
 {
     type_register_static(&aspeed_gpio_info);
     type_register_static(&aspeed_gpio_ast2400_info);
     type_register_static(&aspeed_gpio_ast2500_info);
+    type_register_static(&aspeed_gpio_ast2600_3_6v_info);
+    type_register_static(&aspeed_gpio_ast2600_1_8v_info);
 }
 
 type_init(aspeed_gpio_register_types);
-- 
2.20.1