From: Arnd Bergmann <arnd@arndb.de>
To: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>,
Hartley Sweeten <hsweeten@visionengravers.com>,
Alexander Sverdlin <alexander.sverdlin@gmail.com>,
Hubert Feurstein <hubert.feurstein@contec.at>,
Lukasz Majewski <lukma@denx.de>
Subject: [PATCH 2/6] ARM: ep93xx: enable SPARSE_IRQ
Date: Fri, 18 Oct 2019 18:29:15 +0200 [thread overview]
Message-ID: <20191018163047.1284736-2-arnd@arndb.de> (raw)
In-Reply-To: <20191018163047.1284736-1-arnd@arndb.de>
Without CONFIG_SPARSE_IRQ, we rely on mach/irqs.h to define NR_IRQS
globally. Do the minimal conversion by setting .nr_irqs in each
machine descriptor.
Only the vision_ep9307 machine has extra IRQs for GPIOs, so make
.nr_irqs the original value there, while using the plain NR_EP93XX_IRQS
everywhere else.
---
It's been a while since I did this, no idea what else is needed
here or if this is correct at all.
Cc: Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Cc: Hubert Feurstein <hubert.feurstein@contec.at>
Cc: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/Kconfig | 2 ++
arch/arm/mach-ep93xx/adssphere.c | 1 +
arch/arm/mach-ep93xx/edb93xx.c | 8 ++++++++
arch/arm/mach-ep93xx/gesbc9312.c | 1 +
arch/arm/mach-ep93xx/{include/mach => }/irqs.h | 7 -------
arch/arm/mach-ep93xx/micro9.c | 4 ++++
arch/arm/mach-ep93xx/simone.c | 1 +
arch/arm/mach-ep93xx/snappercl15.c | 1 +
arch/arm/mach-ep93xx/soc.h | 1 +
arch/arm/mach-ep93xx/ts72xx.c | 3 ++-
arch/arm/mach-ep93xx/vision_ep9307.c | 1 +
11 files changed, 22 insertions(+), 8 deletions(-)
rename arch/arm/mach-ep93xx/{include/mach => }/irqs.h (94%)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b6681b61e46c..cca3d240a01e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -365,6 +365,8 @@ config ARCH_EP93XX
select CPU_ARM920T
select GENERIC_CLOCKEVENTS
select GPIOLIB
+ select IRQ_DOMAIN
+ select SPARSE_IRQ
help
This enables support for the Cirrus EP93xx series of CPUs.
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 57cfd8ebe04f..bb5e7b3c2fba 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -32,6 +32,7 @@ static void __init adssphere_init_machine(void)
MACHINE_START(ADSSPHERE, "ADS Sphere board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 7b7280c21ee0..19f38f58ff46 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -243,6 +243,7 @@ static void __init edb93xx_init_machine(void)
MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
@@ -256,6 +257,7 @@ MACHINE_END
MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
/* Maintainer: George Kashperko <george@chas.com.ua> */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
@@ -269,6 +271,7 @@ MACHINE_END
MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
@@ -282,6 +285,7 @@ MACHINE_END
MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
@@ -295,6 +299,7 @@ MACHINE_END
MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
@@ -308,6 +313,7 @@ MACHINE_END
MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
/* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
@@ -321,6 +327,7 @@ MACHINE_END
MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
@@ -334,6 +341,7 @@ MACHINE_END
MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 8905db1edd5a..6bc86b554864 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -32,6 +32,7 @@ static void __init gesbc9312_init_machine(void)
MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
diff --git a/arch/arm/mach-ep93xx/include/mach/irqs.h b/arch/arm/mach-ep93xx/irqs.h
similarity index 94%
rename from arch/arm/mach-ep93xx/include/mach/irqs.h
rename to arch/arm/mach-ep93xx/irqs.h
index 244daf83ce6d..3ffdb3a2f3e4 100644
--- a/arch/arm/mach-ep93xx/include/mach/irqs.h
+++ b/arch/arm/mach-ep93xx/irqs.h
@@ -1,8 +1,4 @@
/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-ep93xx/include/mach/irqs.h
- */
-
#ifndef __ASM_ARCH_IRQS_H
#define __ASM_ARCH_IRQS_H
@@ -73,7 +69,4 @@
#define EP93XX_BOARD_IRQ(x) (NR_EP93XX_IRQS + (x))
#define EP93XX_BOARD_IRQS 32
-#define NR_IRQS (NR_EP93XX_IRQS + EP93XX_BOARD_IRQS)
-
-
#endif
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index b18ebf26da45..271898b17296 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -76,6 +76,7 @@ static void __init micro9_init_machine(void)
MACHINE_START(MICRO9, "Contec Micro9-High")
/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
@@ -89,6 +90,7 @@ MACHINE_END
MACHINE_START(MICRO9M, "Contec Micro9-Mid")
/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
@@ -102,6 +104,7 @@ MACHINE_END
MACHINE_START(MICRO9L, "Contec Micro9-Lite")
/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
@@ -115,6 +118,7 @@ MACHINE_END
MACHINE_START(MICRO9S, "Contec Micro9-Slim")
/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index 8a53b74dc4b2..e2f7243629fe 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -119,6 +119,7 @@ static void __init simone_init_machine(void)
MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
/* Maintainer: Ryan Mallon */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index 703f25f19d51..29c8ea34c8e1 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -153,6 +153,7 @@ static void __init snappercl15_init_machine(void)
MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
/* Maintainer: Ryan Mallon */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
diff --git a/arch/arm/mach-ep93xx/soc.h b/arch/arm/mach-ep93xx/soc.h
index f2dace1c9154..770743bbaf80 100644
--- a/arch/arm/mach-ep93xx/soc.h
+++ b/arch/arm/mach-ep93xx/soc.h
@@ -10,6 +10,7 @@
#define _EP93XX_SOC_H
#include <mach/ep93xx-regs.h>
+#include "irqs.h"
/*
* EP93xx Physical Memory Map:
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index e0e1b11032f1..9ac0308f3d71 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -22,7 +22,6 @@
#include "gpio-ep93xx.h"
#include "hardware.h"
-#include <mach/irqs.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
@@ -350,6 +349,7 @@ static void __init ts72xx_init_machine(void)
MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
.map_io = ts72xx_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
@@ -414,6 +414,7 @@ static void __init bk3_init_machine(void)
MACHINE_START(BK3, "Liebherr controller BK3.1")
/* Maintainer: Lukasz Majewski <lukma@denx.de> */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
.map_io = ts72xx_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index cbcba3136d74..04f9f15be248 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -302,6 +302,7 @@ static void __init vision_init_machine(void)
MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS + EP93XX_BOARD_IRQS,
.map_io = vision_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
--
2.20.0
WARNING: multiple messages have this Message-ID (diff)
From: Arnd Bergmann <arnd@arndb.de>
To: linux-arm-kernel@lists.infradead.org
Cc: Arnd Bergmann <arnd@arndb.de>,
linux-kernel@vger.kernel.org, Lukasz Majewski <lukma@denx.de>,
Hubert Feurstein <hubert.feurstein@contec.at>,
Hartley Sweeten <hsweeten@visionengravers.com>,
Alexander Sverdlin <alexander.sverdlin@gmail.com>
Subject: [PATCH 2/6] ARM: ep93xx: enable SPARSE_IRQ
Date: Fri, 18 Oct 2019 18:29:15 +0200 [thread overview]
Message-ID: <20191018163047.1284736-2-arnd@arndb.de> (raw)
In-Reply-To: <20191018163047.1284736-1-arnd@arndb.de>
Without CONFIG_SPARSE_IRQ, we rely on mach/irqs.h to define NR_IRQS
globally. Do the minimal conversion by setting .nr_irqs in each
machine descriptor.
Only the vision_ep9307 machine has extra IRQs for GPIOs, so make
.nr_irqs the original value there, while using the plain NR_EP93XX_IRQS
everywhere else.
---
It's been a while since I did this, no idea what else is needed
here or if this is correct at all.
Cc: Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Cc: Hubert Feurstein <hubert.feurstein@contec.at>
Cc: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/Kconfig | 2 ++
arch/arm/mach-ep93xx/adssphere.c | 1 +
arch/arm/mach-ep93xx/edb93xx.c | 8 ++++++++
arch/arm/mach-ep93xx/gesbc9312.c | 1 +
arch/arm/mach-ep93xx/{include/mach => }/irqs.h | 7 -------
arch/arm/mach-ep93xx/micro9.c | 4 ++++
arch/arm/mach-ep93xx/simone.c | 1 +
arch/arm/mach-ep93xx/snappercl15.c | 1 +
arch/arm/mach-ep93xx/soc.h | 1 +
arch/arm/mach-ep93xx/ts72xx.c | 3 ++-
arch/arm/mach-ep93xx/vision_ep9307.c | 1 +
11 files changed, 22 insertions(+), 8 deletions(-)
rename arch/arm/mach-ep93xx/{include/mach => }/irqs.h (94%)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b6681b61e46c..cca3d240a01e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -365,6 +365,8 @@ config ARCH_EP93XX
select CPU_ARM920T
select GENERIC_CLOCKEVENTS
select GPIOLIB
+ select IRQ_DOMAIN
+ select SPARSE_IRQ
help
This enables support for the Cirrus EP93xx series of CPUs.
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 57cfd8ebe04f..bb5e7b3c2fba 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -32,6 +32,7 @@ static void __init adssphere_init_machine(void)
MACHINE_START(ADSSPHERE, "ADS Sphere board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 7b7280c21ee0..19f38f58ff46 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -243,6 +243,7 @@ static void __init edb93xx_init_machine(void)
MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
@@ -256,6 +257,7 @@ MACHINE_END
MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
/* Maintainer: George Kashperko <george@chas.com.ua> */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
@@ -269,6 +271,7 @@ MACHINE_END
MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
@@ -282,6 +285,7 @@ MACHINE_END
MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
@@ -295,6 +299,7 @@ MACHINE_END
MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
@@ -308,6 +313,7 @@ MACHINE_END
MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
/* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
@@ -321,6 +327,7 @@ MACHINE_END
MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
@@ -334,6 +341,7 @@ MACHINE_END
MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 8905db1edd5a..6bc86b554864 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -32,6 +32,7 @@ static void __init gesbc9312_init_machine(void)
MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
diff --git a/arch/arm/mach-ep93xx/include/mach/irqs.h b/arch/arm/mach-ep93xx/irqs.h
similarity index 94%
rename from arch/arm/mach-ep93xx/include/mach/irqs.h
rename to arch/arm/mach-ep93xx/irqs.h
index 244daf83ce6d..3ffdb3a2f3e4 100644
--- a/arch/arm/mach-ep93xx/include/mach/irqs.h
+++ b/arch/arm/mach-ep93xx/irqs.h
@@ -1,8 +1,4 @@
/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * arch/arm/mach-ep93xx/include/mach/irqs.h
- */
-
#ifndef __ASM_ARCH_IRQS_H
#define __ASM_ARCH_IRQS_H
@@ -73,7 +69,4 @@
#define EP93XX_BOARD_IRQ(x) (NR_EP93XX_IRQS + (x))
#define EP93XX_BOARD_IRQS 32
-#define NR_IRQS (NR_EP93XX_IRQS + EP93XX_BOARD_IRQS)
-
-
#endif
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index b18ebf26da45..271898b17296 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -76,6 +76,7 @@ static void __init micro9_init_machine(void)
MACHINE_START(MICRO9, "Contec Micro9-High")
/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
@@ -89,6 +90,7 @@ MACHINE_END
MACHINE_START(MICRO9M, "Contec Micro9-Mid")
/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
@@ -102,6 +104,7 @@ MACHINE_END
MACHINE_START(MICRO9L, "Contec Micro9-Lite")
/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
@@ -115,6 +118,7 @@ MACHINE_END
MACHINE_START(MICRO9S, "Contec Micro9-Slim")
/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index 8a53b74dc4b2..e2f7243629fe 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -119,6 +119,7 @@ static void __init simone_init_machine(void)
MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
/* Maintainer: Ryan Mallon */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index 703f25f19d51..29c8ea34c8e1 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -153,6 +153,7 @@ static void __init snappercl15_init_machine(void)
MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
/* Maintainer: Ryan Mallon */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
diff --git a/arch/arm/mach-ep93xx/soc.h b/arch/arm/mach-ep93xx/soc.h
index f2dace1c9154..770743bbaf80 100644
--- a/arch/arm/mach-ep93xx/soc.h
+++ b/arch/arm/mach-ep93xx/soc.h
@@ -10,6 +10,7 @@
#define _EP93XX_SOC_H
#include <mach/ep93xx-regs.h>
+#include "irqs.h"
/*
* EP93xx Physical Memory Map:
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index e0e1b11032f1..9ac0308f3d71 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -22,7 +22,6 @@
#include "gpio-ep93xx.h"
#include "hardware.h"
-#include <mach/irqs.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
@@ -350,6 +349,7 @@ static void __init ts72xx_init_machine(void)
MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
.map_io = ts72xx_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
@@ -414,6 +414,7 @@ static void __init bk3_init_machine(void)
MACHINE_START(BK3, "Liebherr controller BK3.1")
/* Maintainer: Lukasz Majewski <lukma@denx.de> */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS,
.map_io = ts72xx_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index cbcba3136d74..04f9f15be248 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -302,6 +302,7 @@ static void __init vision_init_machine(void)
MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
.atag_offset = 0x100,
+ .nr_irqs = NR_EP93XX_IRQS + EP93XX_BOARD_IRQS,
.map_io = vision_map_io,
.init_irq = ep93xx_init_irq,
.init_time = ep93xx_timer_init,
--
2.20.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-10-18 16:32 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-18 16:29 [PATCH 1/6] ARM: versatile: move integrator/realview/vexpress to versatile Arnd Bergmann
2019-10-18 16:29 ` Arnd Bergmann
2019-10-18 16:29 ` Arnd Bergmann [this message]
2019-10-18 16:29 ` [PATCH 2/6] ARM: ep93xx: enable SPARSE_IRQ Arnd Bergmann
2019-10-19 16:42 ` Alexander Sverdlin
2019-10-19 16:42 ` Alexander Sverdlin
2019-10-19 20:08 ` Arnd Bergmann
2019-10-19 20:08 ` Arnd Bergmann
2019-10-19 20:24 ` Alexander Sverdlin
2019-10-19 20:24 ` Alexander Sverdlin
2019-10-19 20:44 ` Arnd Bergmann
2019-10-19 20:44 ` Arnd Bergmann
2019-10-19 21:14 ` Alexander Sverdlin
2019-10-19 21:14 ` Alexander Sverdlin
2019-10-20 11:49 ` Arnd Bergmann
2019-10-20 11:49 ` Arnd Bergmann
2019-10-20 21:45 ` Alexander Sverdlin
2019-10-20 21:45 ` Alexander Sverdlin
2019-10-21 6:53 ` Arnd Bergmann
2019-10-21 6:53 ` Arnd Bergmann
2019-10-18 16:29 ` [PATCH 3/6] ARM: ep93xx: make mach/ep93xx-regs.h local Arnd Bergmann
2019-10-18 16:29 ` Arnd Bergmann
2019-10-18 16:29 ` [PATCH 4/6] ARM: dove: multiplatform support Arnd Bergmann
2019-10-18 16:29 ` Arnd Bergmann
2019-10-18 16:29 ` [PATCH 5/6] ARM: orion/mv78xx0/dove: move to a common directory Arnd Bergmann
2019-10-18 16:29 ` Arnd Bergmann
2019-10-18 16:29 ` [PATCH 6/6] ARM: orion: unify Makefile/Kconfig files Arnd Bergmann
2019-10-18 16:29 ` Arnd Bergmann
2019-10-18 19:01 ` Andrew Lunn
2019-10-18 19:01 ` Andrew Lunn
2019-10-18 19:18 ` Arnd Bergmann
2019-10-18 19:18 ` Arnd Bergmann
2019-11-04 14:57 ` [PATCH 1/6] ARM: versatile: move integrator/realview/vexpress to versatile Linus Walleij
2019-11-04 14:57 ` Linus Walleij
2019-11-04 15:13 ` Sudeep Holla
2019-11-04 15:13 ` Sudeep Holla
2019-11-04 15:25 ` Arnd Bergmann
2019-11-04 15:25 ` Arnd Bergmann
2019-11-05 16:57 ` Sudeep Holla
2019-11-05 16:57 ` Sudeep Holla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191018163047.1284736-2-arnd@arndb.de \
--to=arnd@arndb.de \
--cc=alexander.sverdlin@gmail.com \
--cc=hsweeten@visionengravers.com \
--cc=hubert.feurstein@contec.at \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lukma@denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.