All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ayan Halder <Ayan.Halder@arm.com>
To: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: "dri-devel@lists.freedesktop.org"
	<dri-devel@lists.freedesktop.org>,
	David Airlie <airlied@linux.ie>,
	Liviu Dudau <Liviu.Dudau@arm.com>,
	"james qian wang (Arm Technology China)"
	<james.qian.wang@arm.com>,
	Mihail Atanassov <Mihail.Atanassov@arm.com>,
	"linux-rockchip@lists.infradead.org" 
	<linux-rockchip@lists.infradead.org>,
	"linux-arm-kernel@lists.infradead.org" 
	<linux-arm-kernel@lists.infradead.org>,
	"kernel@collabora.com" <kernel@collabora.com>,
	Sean Paul <sean@poorly.run>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	nd <nd@arm.com>
Subject: Re: [PATCH 1/2] drm/arm: Factor out generic afbc helpers
Date: Mon, 21 Oct 2019 13:50:14 +0000	[thread overview]
Message-ID: <20191021135013.GA16072@arm.com> (raw)
In-Reply-To: <20191011111813.20851-2-andrzej.p@collabora.com>

On Fri, Oct 11, 2019 at 01:18:10PM +0200, Andrzej Pietrasiewicz wrote:
> These are useful for other users of afbc, e.g. rockchip.
> 
> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>

Hi Andrzej,

Thanks a lot for doing this. Much appreciated. :)
It was on our TODO list for a long time.

I have cc-ed james.qian.wang@arm.com, Mihail.Atanassov@arm.com for
their comments as well.

> ---
>  drivers/gpu/drm/Kconfig          |   4 ++
>  drivers/gpu/drm/Makefile         |   1 +
>  drivers/gpu/drm/arm/Kconfig      |   1 +
>  drivers/gpu/drm/arm/malidp_drv.c |  58 ++--------------
>  drivers/gpu/drm/drm_afbc.c       | 114 +++++++++++++++++++++++++++++++
>  include/drm/drm_afbc.h           |  25 +++++++
>  6 files changed, 149 insertions(+), 54 deletions(-)
>  create mode 100644 drivers/gpu/drm/drm_afbc.c
>  create mode 100644 include/drm/drm_afbc.h
> 
> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> index 3c88420e3497..00e3f90557f4 100644
> --- a/drivers/gpu/drm/Kconfig
> +++ b/drivers/gpu/drm/Kconfig
> @@ -195,6 +195,10 @@ config DRM_SCHED
>  	tristate
>  	depends on DRM
>  
> +config DRM_AFBC
> +	tristate
> +	depends on DRM
Adding a 'help' would be great here. Stealing the first line from
https://www.kernel.org/doc/html/latest/gpu/afbc.html

"AFBC is a proprietary lossless image compression protocol and format.
It provides fine-grained random access and minimizes the amount of
data transferred between IP blocks."

> +
>  source "drivers/gpu/drm/i2c/Kconfig"
>  
>  source "drivers/gpu/drm/arm/Kconfig"
> diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
> index 9f0d2ee35794..55368b668355 100644
> --- a/drivers/gpu/drm/Makefile
> +++ b/drivers/gpu/drm/Makefile
> @@ -31,6 +31,7 @@ drm-$(CONFIG_OF) += drm_of.o
>  drm-$(CONFIG_AGP) += drm_agpsupport.o
>  drm-$(CONFIG_DEBUG_FS) += drm_debugfs.o drm_debugfs_crc.o
>  drm-$(CONFIG_DRM_LOAD_EDID_FIRMWARE) += drm_edid_load.o
> +drm-$(CONFIG_DRM_AFBC) += drm_afbc.o
>  
>  drm_vram_helper-y := drm_gem_vram_helper.o \
>  		     drm_vram_helper_common.o \
> diff --git a/drivers/gpu/drm/arm/Kconfig b/drivers/gpu/drm/arm/Kconfig
> index a204103b3efb..25c3dc408cda 100644
> --- a/drivers/gpu/drm/arm/Kconfig
> +++ b/drivers/gpu/drm/arm/Kconfig
> @@ -29,6 +29,7 @@ config DRM_MALI_DISPLAY
>  	select DRM_KMS_HELPER
>  	select DRM_KMS_CMA_HELPER
>  	select DRM_GEM_CMA_HELPER
> +	select DRM_AFBC
>  	select VIDEOMODE_HELPERS
>  	help
>  	  Choose this option if you want to compile the ARM Mali Display
> diff --git a/drivers/gpu/drm/arm/malidp_drv.c b/drivers/gpu/drm/arm/malidp_drv.c
> index f25ec4382277..a67b69e08f63 100644
> --- a/drivers/gpu/drm/arm/malidp_drv.c
> +++ b/drivers/gpu/drm/arm/malidp_drv.c
> @@ -16,6 +16,7 @@
>  #include <linux/debugfs.h>
>  
>  #include <drm/drmP.h>
> +#include <drm/drm_afbc.h>
>  #include <drm/drm_atomic.h>
>  #include <drm/drm_atomic_helper.h>
>  #include <drm/drm_crtc.h>
> @@ -33,8 +34,6 @@
>  #include "malidp_hw.h"
>  
>  #define MALIDP_CONF_VALID_TIMEOUT	250
> -#define AFBC_HEADER_SIZE		16
> -#define AFBC_SUPERBLK_ALIGNMENT		128
>  
>  static void malidp_write_gamma_table(struct malidp_hw_device *hwdev,
>  				     u32 data[MALIDP_COEFFTAB_NUM_COEFFS])
> @@ -275,24 +274,8 @@ malidp_verify_afbc_framebuffer_caps(struct drm_device *dev,
>  					mode_cmd->modifier[0]) == false)
>  		return false;
>  
> -	if (mode_cmd->offsets[0] != 0) {
> -		DRM_DEBUG_KMS("AFBC buffers' plane offset should be 0\n");
> -		return false;
> -	}
> -
> -	switch (mode_cmd->modifier[0] & AFBC_SIZE_MASK) {
> -	case AFBC_SIZE_16X16:
> -		if ((mode_cmd->width % 16) || (mode_cmd->height % 16)) {
> -			DRM_DEBUG_KMS("AFBC buffers must be aligned to 16 pixels\n");
> -			return false;
> -		}
> -		break;
> -	default:
> -		DRM_DEBUG_KMS("Unsupported AFBC block size\n");
> -		return false;
> -	}
> -
> -	return true;
> +	return drm_afbc_check_offset(dev, mode_cmd) &&
> +	       drm_afbc_check_size_align(dev, mode_cmd);
>  }
>  
>  static bool
> @@ -300,53 +283,20 @@ malidp_verify_afbc_framebuffer_size(struct drm_device *dev,
>  				    struct drm_file *file,
>  				    const struct drm_mode_fb_cmd2 *mode_cmd)
>  {
> -	int n_superblocks = 0;
>  	const struct drm_format_info *info;
>  	struct drm_gem_object *objs = NULL;
> -	u32 afbc_superblock_size = 0, afbc_superblock_height = 0;
> -	u32 afbc_superblock_width = 0, afbc_size = 0;
>  	int bpp = 0;
>  
> -	switch (mode_cmd->modifier[0] & AFBC_SIZE_MASK) {
> -	case AFBC_SIZE_16X16:
> -		afbc_superblock_height = 16;
> -		afbc_superblock_width = 16;
> -		break;
> -	default:
> -		DRM_DEBUG_KMS("AFBC superblock size is not supported\n");
> -		return false;
> -	}
> -
>  	info = drm_get_format_info(dev, mode_cmd);
> -
> -	n_superblocks = (mode_cmd->width / afbc_superblock_width) *
> -		(mode_cmd->height / afbc_superblock_height);
> -
>  	bpp = malidp_format_get_bpp(info->format);
>  
> -	afbc_superblock_size = (bpp * afbc_superblock_width * afbc_superblock_height)
> -				/ BITS_PER_BYTE;
> -
> -	afbc_size = ALIGN(n_superblocks * AFBC_HEADER_SIZE, AFBC_SUPERBLK_ALIGNMENT);
> -	afbc_size += n_superblocks * ALIGN(afbc_superblock_size, AFBC_SUPERBLK_ALIGNMENT);
> -
> -	if ((mode_cmd->width * bpp) != (mode_cmd->pitches[0] * BITS_PER_BYTE)) {
> -		DRM_DEBUG_KMS("Invalid value of (pitch * BITS_PER_BYTE) (=%u) "
> -			      "should be same as width (=%u) * bpp (=%u)\n",
> -			      (mode_cmd->pitches[0] * BITS_PER_BYTE),
> -			      mode_cmd->width, bpp);
> -		return false;
> -	}
> -
>  	objs = drm_gem_object_lookup(file, mode_cmd->handles[0]);
>  	if (!objs) {
>  		DRM_DEBUG_KMS("Failed to lookup GEM object\n");
>  		return false;
>  	}
>  
> -	if (objs->size < afbc_size) {
> -		DRM_DEBUG_KMS("buffer size (%zu) too small for AFBC buffer size = %u\n",
> -			      objs->size, afbc_size);
> +	if (!drm_afbc_check_fb_size(dev, mode_cmd, objs, bpp)) {
>  		drm_gem_object_put_unlocked(objs);
>  		return false;
>  	}
Also can you do the code refactoring for komeda driver as well.
specifically komeda_fb_afbc_size_check(). I will let
james.qian.wang@arm.com and Mihail.Atanassov@arm.com have their
opinion on this.

> diff --git a/drivers/gpu/drm/drm_afbc.c b/drivers/gpu/drm/drm_afbc.c
> new file mode 100644
> index 000000000000..3e8a9225fd2e
> --- /dev/null
> +++ b/drivers/gpu/drm/drm_afbc.c
> @@ -0,0 +1,114 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * (C) 2019 Collabora Ltd.
> + *
> + * author: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
> + *
> + */
> +#include <linux/module.h>
> +
> +#include <drm/drm_afbc.h>
> +#include <drm/drm_device.h>
> +#include <drm/drm_fourcc.h>
> +#include <drm/drm_gem.h>
> +#include <drm/drm_mode.h>
> +#include <drm/drm_print.h>
> +
> +#define AFBC_HEADER_SIZE		16
> +#define AFBC_SUPERBLK_ALIGNMENT		128
> +
> +bool drm_afbc_check_offset(struct drm_device *dev,
> +			   const struct drm_mode_fb_cmd2 *mode_cmd)
> +{
> +	if (mode_cmd->offsets[0] != 0) {
> +		DRM_DEBUG_KMS("AFBC buffers' plane offset should be 0\n");
> +		return false;
> +	}
> +
> +	return true;
> +}
> +EXPORT_SYMBOL_GPL(drm_afbc_check_offset);
> +
> +bool drm_afbc_check_size_align(struct drm_device *dev,
> +			       const struct drm_mode_fb_cmd2 *mode_cmd)
> +{
> +
> +	switch (mode_cmd->modifier[0] & AFBC_FORMAT_MOD_BLOCK_SIZE_MASK) {
> +	case AFBC_FORMAT_MOD_BLOCK_SIZE_16x16:
> +		if ((mode_cmd->width % 16) || (mode_cmd->height % 16)) {
> +			DRM_DEBUG_KMS(
> +				"AFBC buffer must be aligned to 16 pixels\n"
> +			);
> +			return false;
> +		}
> +		break;
> +	case AFBC_FORMAT_MOD_BLOCK_SIZE_32x8:
> +		/* fall through */
> +	case AFBC_FORMAT_MOD_BLOCK_SIZE_64x4:
> +		/* fall through */
> +	case AFBC_FORMAT_MOD_BLOCK_SIZE_32x8_64x4:
> +		/* fall through */
> +	default:
> +		DRM_DEBUG_KMS("Unsupported AFBC block size\n");
> +		return false;
> +	}
> +
> +	return true;
> +}
> +EXPORT_SYMBOL_GPL(drm_afbc_check_size_align);
> +
> +bool drm_afbc_check_fb_size(struct drm_device *dev,
> +			    const struct drm_mode_fb_cmd2 *mode_cmd,
> +			    struct drm_gem_object *objs, int bpp)
> +{
> +	int n_superblocks = 0;
> +	u32 afbc_superblock_size = 0, afbc_superblock_height = 0;
> +	u32 afbc_superblock_width = 0, afbc_size = 0;
> +
> +	switch (mode_cmd->modifier[0] & AFBC_FORMAT_MOD_BLOCK_SIZE_MASK) {
> +	case AFBC_FORMAT_MOD_BLOCK_SIZE_16x16:
> +		afbc_superblock_height = 16;
> +		afbc_superblock_width = 16;
> +		break;
> +	case AFBC_FORMAT_MOD_BLOCK_SIZE_32x8:
Copying from
https://cgit.freedesktop.org/drm/drm-tip/tree/drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.c#n60
                afbc_superblock_width = 32;
                afbc_superblock_height = 8;
> +		/* fall through */
> +	case AFBC_FORMAT_MOD_BLOCK_SIZE_64x4:
> +		/* fall through */
> +	case AFBC_FORMAT_MOD_BLOCK_SIZE_32x8_64x4:
> +		/* fall through */
> +	default:
> +		DRM_DEBUG_KMS("AFBC superblock size is not supported\n");
> +		return false;
> +	}
Can you combine the two switch - case confitions (from this function
and the one in drm_afbc_check_size_align()) and put it in a separate
function (say drm_afbc_get_superblock_dimensions()) of its own ?
This will help to avoid code repetition.

> +
> +	n_superblocks = (mode_cmd->width / afbc_superblock_width) *
> +		(mode_cmd->height / afbc_superblock_height);
> +
> +	afbc_superblock_size =
> +		(bpp * afbc_superblock_width * afbc_superblock_height)
> +			/ BITS_PER_BYTE;
> +
> +	afbc_size = ALIGN(n_superblocks * AFBC_HEADER_SIZE,
> +			  AFBC_SUPERBLK_ALIGNMENT);
> +	afbc_size += n_superblocks *
> +		ALIGN(afbc_superblock_size, AFBC_SUPERBLK_ALIGNMENT);
> +
> +	if ((mode_cmd->width * bpp) != (mode_cmd->pitches[0] * BITS_PER_BYTE)) {
> +		DRM_DEBUG_KMS("Invalid value of (pitch * BITS_PER_BYTE) (=%u) should be same as width (=%u) * bpp (=%u)\n",
> +			mode_cmd->pitches[0] * BITS_PER_BYTE,
> +			mode_cmd->width, bpp
> +		);
> +		return false;
> +	}
> +
> +	if (objs->size < afbc_size) {
> +		DRM_DEBUG_KMS("buffer size (%zu) too small for AFBC buffer size = %u\n",
> +			objs->size, afbc_size
> +		);
> +
> +		return false;
> +	}
> +
> +	return true;
> +}
> +EXPORT_SYMBOL(drm_afbc_check_fb_size);
> diff --git a/include/drm/drm_afbc.h b/include/drm/drm_afbc.h
> new file mode 100644
> index 000000000000..ce39c850217b
> --- /dev/null
> +++ b/include/drm/drm_afbc.h
> @@ -0,0 +1,25 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * (C) 2019 Collabora Ltd.
> + *
> + * author: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
> + *
> + */
> +#ifndef __DRM_AFBC_H__
> +#define __DRM_AFBC_H__
> +
> +struct drm_device;
> +struct drm_mode_fb_cmd2;
> +struct drm_gem_object;
> +
> +bool drm_afbc_check_offset(struct drm_device *dev,
> +			   const struct drm_mode_fb_cmd2 *mode_cmd);
> +
> +bool drm_afbc_check_size_align(struct drm_device *dev,
> +			       const struct drm_mode_fb_cmd2 *mode_cmd);
> +
> +bool drm_afbc_check_fb_size(struct drm_device *dev,
> +			    const struct drm_mode_fb_cmd2 *mode_cmd,
> +			    struct drm_gem_object *objs, int bpp);
> +
> +#endif /* __DRM_AFBC_H__ */
> --
> 2.17.1
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

WARNING: multiple messages have this Message-ID (diff)
From: Ayan Halder <Ayan.Halder@arm.com>
To: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: nd <nd@arm.com>, "kernel@collabora.com" <kernel@collabora.com>,
	David Airlie <airlied@linux.ie>,
	Liviu Dudau <Liviu.Dudau@arm.com>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"dri-devel@lists.freedesktop.org"
	<dri-devel@lists.freedesktop.org>,
	"linux-rockchip@lists.infradead.org"
	<linux-rockchip@lists.infradead.org>,
	"james qian wang (Arm Technology China)"
	<james.qian.wang@arm.com>,
	Mihail Atanassov <Mihail.Atanassov@arm.com>,
	Sean Paul <sean@poorly.run>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH 1/2] drm/arm: Factor out generic afbc helpers
Date: Mon, 21 Oct 2019 13:50:14 +0000	[thread overview]
Message-ID: <20191021135013.GA16072@arm.com> (raw)
In-Reply-To: <20191011111813.20851-2-andrzej.p@collabora.com>

On Fri, Oct 11, 2019 at 01:18:10PM +0200, Andrzej Pietrasiewicz wrote:
> These are useful for other users of afbc, e.g. rockchip.
> 
> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>

Hi Andrzej,

Thanks a lot for doing this. Much appreciated. :)
It was on our TODO list for a long time.

I have cc-ed james.qian.wang@arm.com, Mihail.Atanassov@arm.com for
their comments as well.

> ---
>  drivers/gpu/drm/Kconfig          |   4 ++
>  drivers/gpu/drm/Makefile         |   1 +
>  drivers/gpu/drm/arm/Kconfig      |   1 +
>  drivers/gpu/drm/arm/malidp_drv.c |  58 ++--------------
>  drivers/gpu/drm/drm_afbc.c       | 114 +++++++++++++++++++++++++++++++
>  include/drm/drm_afbc.h           |  25 +++++++
>  6 files changed, 149 insertions(+), 54 deletions(-)
>  create mode 100644 drivers/gpu/drm/drm_afbc.c
>  create mode 100644 include/drm/drm_afbc.h
> 
> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> index 3c88420e3497..00e3f90557f4 100644
> --- a/drivers/gpu/drm/Kconfig
> +++ b/drivers/gpu/drm/Kconfig
> @@ -195,6 +195,10 @@ config DRM_SCHED
>  	tristate
>  	depends on DRM
>  
> +config DRM_AFBC
> +	tristate
> +	depends on DRM
Adding a 'help' would be great here. Stealing the first line from
https://www.kernel.org/doc/html/latest/gpu/afbc.html

"AFBC is a proprietary lossless image compression protocol and format.
It provides fine-grained random access and minimizes the amount of
data transferred between IP blocks."

> +
>  source "drivers/gpu/drm/i2c/Kconfig"
>  
>  source "drivers/gpu/drm/arm/Kconfig"
> diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
> index 9f0d2ee35794..55368b668355 100644
> --- a/drivers/gpu/drm/Makefile
> +++ b/drivers/gpu/drm/Makefile
> @@ -31,6 +31,7 @@ drm-$(CONFIG_OF) += drm_of.o
>  drm-$(CONFIG_AGP) += drm_agpsupport.o
>  drm-$(CONFIG_DEBUG_FS) += drm_debugfs.o drm_debugfs_crc.o
>  drm-$(CONFIG_DRM_LOAD_EDID_FIRMWARE) += drm_edid_load.o
> +drm-$(CONFIG_DRM_AFBC) += drm_afbc.o
>  
>  drm_vram_helper-y := drm_gem_vram_helper.o \
>  		     drm_vram_helper_common.o \
> diff --git a/drivers/gpu/drm/arm/Kconfig b/drivers/gpu/drm/arm/Kconfig
> index a204103b3efb..25c3dc408cda 100644
> --- a/drivers/gpu/drm/arm/Kconfig
> +++ b/drivers/gpu/drm/arm/Kconfig
> @@ -29,6 +29,7 @@ config DRM_MALI_DISPLAY
>  	select DRM_KMS_HELPER
>  	select DRM_KMS_CMA_HELPER
>  	select DRM_GEM_CMA_HELPER
> +	select DRM_AFBC
>  	select VIDEOMODE_HELPERS
>  	help
>  	  Choose this option if you want to compile the ARM Mali Display
> diff --git a/drivers/gpu/drm/arm/malidp_drv.c b/drivers/gpu/drm/arm/malidp_drv.c
> index f25ec4382277..a67b69e08f63 100644
> --- a/drivers/gpu/drm/arm/malidp_drv.c
> +++ b/drivers/gpu/drm/arm/malidp_drv.c
> @@ -16,6 +16,7 @@
>  #include <linux/debugfs.h>
>  
>  #include <drm/drmP.h>
> +#include <drm/drm_afbc.h>
>  #include <drm/drm_atomic.h>
>  #include <drm/drm_atomic_helper.h>
>  #include <drm/drm_crtc.h>
> @@ -33,8 +34,6 @@
>  #include "malidp_hw.h"
>  
>  #define MALIDP_CONF_VALID_TIMEOUT	250
> -#define AFBC_HEADER_SIZE		16
> -#define AFBC_SUPERBLK_ALIGNMENT		128
>  
>  static void malidp_write_gamma_table(struct malidp_hw_device *hwdev,
>  				     u32 data[MALIDP_COEFFTAB_NUM_COEFFS])
> @@ -275,24 +274,8 @@ malidp_verify_afbc_framebuffer_caps(struct drm_device *dev,
>  					mode_cmd->modifier[0]) == false)
>  		return false;
>  
> -	if (mode_cmd->offsets[0] != 0) {
> -		DRM_DEBUG_KMS("AFBC buffers' plane offset should be 0\n");
> -		return false;
> -	}
> -
> -	switch (mode_cmd->modifier[0] & AFBC_SIZE_MASK) {
> -	case AFBC_SIZE_16X16:
> -		if ((mode_cmd->width % 16) || (mode_cmd->height % 16)) {
> -			DRM_DEBUG_KMS("AFBC buffers must be aligned to 16 pixels\n");
> -			return false;
> -		}
> -		break;
> -	default:
> -		DRM_DEBUG_KMS("Unsupported AFBC block size\n");
> -		return false;
> -	}
> -
> -	return true;
> +	return drm_afbc_check_offset(dev, mode_cmd) &&
> +	       drm_afbc_check_size_align(dev, mode_cmd);
>  }
>  
>  static bool
> @@ -300,53 +283,20 @@ malidp_verify_afbc_framebuffer_size(struct drm_device *dev,
>  				    struct drm_file *file,
>  				    const struct drm_mode_fb_cmd2 *mode_cmd)
>  {
> -	int n_superblocks = 0;
>  	const struct drm_format_info *info;
>  	struct drm_gem_object *objs = NULL;
> -	u32 afbc_superblock_size = 0, afbc_superblock_height = 0;
> -	u32 afbc_superblock_width = 0, afbc_size = 0;
>  	int bpp = 0;
>  
> -	switch (mode_cmd->modifier[0] & AFBC_SIZE_MASK) {
> -	case AFBC_SIZE_16X16:
> -		afbc_superblock_height = 16;
> -		afbc_superblock_width = 16;
> -		break;
> -	default:
> -		DRM_DEBUG_KMS("AFBC superblock size is not supported\n");
> -		return false;
> -	}
> -
>  	info = drm_get_format_info(dev, mode_cmd);
> -
> -	n_superblocks = (mode_cmd->width / afbc_superblock_width) *
> -		(mode_cmd->height / afbc_superblock_height);
> -
>  	bpp = malidp_format_get_bpp(info->format);
>  
> -	afbc_superblock_size = (bpp * afbc_superblock_width * afbc_superblock_height)
> -				/ BITS_PER_BYTE;
> -
> -	afbc_size = ALIGN(n_superblocks * AFBC_HEADER_SIZE, AFBC_SUPERBLK_ALIGNMENT);
> -	afbc_size += n_superblocks * ALIGN(afbc_superblock_size, AFBC_SUPERBLK_ALIGNMENT);
> -
> -	if ((mode_cmd->width * bpp) != (mode_cmd->pitches[0] * BITS_PER_BYTE)) {
> -		DRM_DEBUG_KMS("Invalid value of (pitch * BITS_PER_BYTE) (=%u) "
> -			      "should be same as width (=%u) * bpp (=%u)\n",
> -			      (mode_cmd->pitches[0] * BITS_PER_BYTE),
> -			      mode_cmd->width, bpp);
> -		return false;
> -	}
> -
>  	objs = drm_gem_object_lookup(file, mode_cmd->handles[0]);
>  	if (!objs) {
>  		DRM_DEBUG_KMS("Failed to lookup GEM object\n");
>  		return false;
>  	}
>  
> -	if (objs->size < afbc_size) {
> -		DRM_DEBUG_KMS("buffer size (%zu) too small for AFBC buffer size = %u\n",
> -			      objs->size, afbc_size);
> +	if (!drm_afbc_check_fb_size(dev, mode_cmd, objs, bpp)) {
>  		drm_gem_object_put_unlocked(objs);
>  		return false;
>  	}
Also can you do the code refactoring for komeda driver as well.
specifically komeda_fb_afbc_size_check(). I will let
james.qian.wang@arm.com and Mihail.Atanassov@arm.com have their
opinion on this.

> diff --git a/drivers/gpu/drm/drm_afbc.c b/drivers/gpu/drm/drm_afbc.c
> new file mode 100644
> index 000000000000..3e8a9225fd2e
> --- /dev/null
> +++ b/drivers/gpu/drm/drm_afbc.c
> @@ -0,0 +1,114 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * (C) 2019 Collabora Ltd.
> + *
> + * author: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
> + *
> + */
> +#include <linux/module.h>
> +
> +#include <drm/drm_afbc.h>
> +#include <drm/drm_device.h>
> +#include <drm/drm_fourcc.h>
> +#include <drm/drm_gem.h>
> +#include <drm/drm_mode.h>
> +#include <drm/drm_print.h>
> +
> +#define AFBC_HEADER_SIZE		16
> +#define AFBC_SUPERBLK_ALIGNMENT		128
> +
> +bool drm_afbc_check_offset(struct drm_device *dev,
> +			   const struct drm_mode_fb_cmd2 *mode_cmd)
> +{
> +	if (mode_cmd->offsets[0] != 0) {
> +		DRM_DEBUG_KMS("AFBC buffers' plane offset should be 0\n");
> +		return false;
> +	}
> +
> +	return true;
> +}
> +EXPORT_SYMBOL_GPL(drm_afbc_check_offset);
> +
> +bool drm_afbc_check_size_align(struct drm_device *dev,
> +			       const struct drm_mode_fb_cmd2 *mode_cmd)
> +{
> +
> +	switch (mode_cmd->modifier[0] & AFBC_FORMAT_MOD_BLOCK_SIZE_MASK) {
> +	case AFBC_FORMAT_MOD_BLOCK_SIZE_16x16:
> +		if ((mode_cmd->width % 16) || (mode_cmd->height % 16)) {
> +			DRM_DEBUG_KMS(
> +				"AFBC buffer must be aligned to 16 pixels\n"
> +			);
> +			return false;
> +		}
> +		break;
> +	case AFBC_FORMAT_MOD_BLOCK_SIZE_32x8:
> +		/* fall through */
> +	case AFBC_FORMAT_MOD_BLOCK_SIZE_64x4:
> +		/* fall through */
> +	case AFBC_FORMAT_MOD_BLOCK_SIZE_32x8_64x4:
> +		/* fall through */
> +	default:
> +		DRM_DEBUG_KMS("Unsupported AFBC block size\n");
> +		return false;
> +	}
> +
> +	return true;
> +}
> +EXPORT_SYMBOL_GPL(drm_afbc_check_size_align);
> +
> +bool drm_afbc_check_fb_size(struct drm_device *dev,
> +			    const struct drm_mode_fb_cmd2 *mode_cmd,
> +			    struct drm_gem_object *objs, int bpp)
> +{
> +	int n_superblocks = 0;
> +	u32 afbc_superblock_size = 0, afbc_superblock_height = 0;
> +	u32 afbc_superblock_width = 0, afbc_size = 0;
> +
> +	switch (mode_cmd->modifier[0] & AFBC_FORMAT_MOD_BLOCK_SIZE_MASK) {
> +	case AFBC_FORMAT_MOD_BLOCK_SIZE_16x16:
> +		afbc_superblock_height = 16;
> +		afbc_superblock_width = 16;
> +		break;
> +	case AFBC_FORMAT_MOD_BLOCK_SIZE_32x8:
Copying from
https://cgit.freedesktop.org/drm/drm-tip/tree/drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.c#n60
                afbc_superblock_width = 32;
                afbc_superblock_height = 8;
> +		/* fall through */
> +	case AFBC_FORMAT_MOD_BLOCK_SIZE_64x4:
> +		/* fall through */
> +	case AFBC_FORMAT_MOD_BLOCK_SIZE_32x8_64x4:
> +		/* fall through */
> +	default:
> +		DRM_DEBUG_KMS("AFBC superblock size is not supported\n");
> +		return false;
> +	}
Can you combine the two switch - case confitions (from this function
and the one in drm_afbc_check_size_align()) and put it in a separate
function (say drm_afbc_get_superblock_dimensions()) of its own ?
This will help to avoid code repetition.

> +
> +	n_superblocks = (mode_cmd->width / afbc_superblock_width) *
> +		(mode_cmd->height / afbc_superblock_height);
> +
> +	afbc_superblock_size =
> +		(bpp * afbc_superblock_width * afbc_superblock_height)
> +			/ BITS_PER_BYTE;
> +
> +	afbc_size = ALIGN(n_superblocks * AFBC_HEADER_SIZE,
> +			  AFBC_SUPERBLK_ALIGNMENT);
> +	afbc_size += n_superblocks *
> +		ALIGN(afbc_superblock_size, AFBC_SUPERBLK_ALIGNMENT);
> +
> +	if ((mode_cmd->width * bpp) != (mode_cmd->pitches[0] * BITS_PER_BYTE)) {
> +		DRM_DEBUG_KMS("Invalid value of (pitch * BITS_PER_BYTE) (=%u) should be same as width (=%u) * bpp (=%u)\n",
> +			mode_cmd->pitches[0] * BITS_PER_BYTE,
> +			mode_cmd->width, bpp
> +		);
> +		return false;
> +	}
> +
> +	if (objs->size < afbc_size) {
> +		DRM_DEBUG_KMS("buffer size (%zu) too small for AFBC buffer size = %u\n",
> +			objs->size, afbc_size
> +		);
> +
> +		return false;
> +	}
> +
> +	return true;
> +}
> +EXPORT_SYMBOL(drm_afbc_check_fb_size);
> diff --git a/include/drm/drm_afbc.h b/include/drm/drm_afbc.h
> new file mode 100644
> index 000000000000..ce39c850217b
> --- /dev/null
> +++ b/include/drm/drm_afbc.h
> @@ -0,0 +1,25 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * (C) 2019 Collabora Ltd.
> + *
> + * author: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
> + *
> + */
> +#ifndef __DRM_AFBC_H__
> +#define __DRM_AFBC_H__
> +
> +struct drm_device;
> +struct drm_mode_fb_cmd2;
> +struct drm_gem_object;
> +
> +bool drm_afbc_check_offset(struct drm_device *dev,
> +			   const struct drm_mode_fb_cmd2 *mode_cmd);
> +
> +bool drm_afbc_check_size_align(struct drm_device *dev,
> +			       const struct drm_mode_fb_cmd2 *mode_cmd);
> +
> +bool drm_afbc_check_fb_size(struct drm_device *dev,
> +			    const struct drm_mode_fb_cmd2 *mode_cmd,
> +			    struct drm_gem_object *objs, int bpp);
> +
> +#endif /* __DRM_AFBC_H__ */
> --
> 2.17.1
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

WARNING: multiple messages have this Message-ID (diff)
From: Ayan Halder <Ayan.Halder@arm.com>
To: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: nd <nd@arm.com>, "kernel@collabora.com" <kernel@collabora.com>,
	David Airlie <airlied@linux.ie>,
	Liviu Dudau <Liviu.Dudau@arm.com>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"dri-devel@lists.freedesktop.org"
	<dri-devel@lists.freedesktop.org>,
	"linux-rockchip@lists.infradead.org"
	<linux-rockchip@lists.infradead.org>,
	"james qian wang \(Arm Technology China\)"
	<james.qian.wang@arm.com>,
	Mihail Atanassov <Mihail.Atanassov@arm.com>,
	Sean Paul <sean@poorly.run>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH 1/2] drm/arm: Factor out generic afbc helpers
Date: Mon, 21 Oct 2019 13:50:14 +0000	[thread overview]
Message-ID: <20191021135013.GA16072@arm.com> (raw)
In-Reply-To: <20191011111813.20851-2-andrzej.p@collabora.com>

On Fri, Oct 11, 2019 at 01:18:10PM +0200, Andrzej Pietrasiewicz wrote:
> These are useful for other users of afbc, e.g. rockchip.
> 
> Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>

Hi Andrzej,

Thanks a lot for doing this. Much appreciated. :)
It was on our TODO list for a long time.

I have cc-ed james.qian.wang@arm.com, Mihail.Atanassov@arm.com for
their comments as well.

> ---
>  drivers/gpu/drm/Kconfig          |   4 ++
>  drivers/gpu/drm/Makefile         |   1 +
>  drivers/gpu/drm/arm/Kconfig      |   1 +
>  drivers/gpu/drm/arm/malidp_drv.c |  58 ++--------------
>  drivers/gpu/drm/drm_afbc.c       | 114 +++++++++++++++++++++++++++++++
>  include/drm/drm_afbc.h           |  25 +++++++
>  6 files changed, 149 insertions(+), 54 deletions(-)
>  create mode 100644 drivers/gpu/drm/drm_afbc.c
>  create mode 100644 include/drm/drm_afbc.h
> 
> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> index 3c88420e3497..00e3f90557f4 100644
> --- a/drivers/gpu/drm/Kconfig
> +++ b/drivers/gpu/drm/Kconfig
> @@ -195,6 +195,10 @@ config DRM_SCHED
>  	tristate
>  	depends on DRM
>  
> +config DRM_AFBC
> +	tristate
> +	depends on DRM
Adding a 'help' would be great here. Stealing the first line from
https://www.kernel.org/doc/html/latest/gpu/afbc.html

"AFBC is a proprietary lossless image compression protocol and format.
It provides fine-grained random access and minimizes the amount of
data transferred between IP blocks."

> +
>  source "drivers/gpu/drm/i2c/Kconfig"
>  
>  source "drivers/gpu/drm/arm/Kconfig"
> diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
> index 9f0d2ee35794..55368b668355 100644
> --- a/drivers/gpu/drm/Makefile
> +++ b/drivers/gpu/drm/Makefile
> @@ -31,6 +31,7 @@ drm-$(CONFIG_OF) += drm_of.o
>  drm-$(CONFIG_AGP) += drm_agpsupport.o
>  drm-$(CONFIG_DEBUG_FS) += drm_debugfs.o drm_debugfs_crc.o
>  drm-$(CONFIG_DRM_LOAD_EDID_FIRMWARE) += drm_edid_load.o
> +drm-$(CONFIG_DRM_AFBC) += drm_afbc.o
>  
>  drm_vram_helper-y := drm_gem_vram_helper.o \
>  		     drm_vram_helper_common.o \
> diff --git a/drivers/gpu/drm/arm/Kconfig b/drivers/gpu/drm/arm/Kconfig
> index a204103b3efb..25c3dc408cda 100644
> --- a/drivers/gpu/drm/arm/Kconfig
> +++ b/drivers/gpu/drm/arm/Kconfig
> @@ -29,6 +29,7 @@ config DRM_MALI_DISPLAY
>  	select DRM_KMS_HELPER
>  	select DRM_KMS_CMA_HELPER
>  	select DRM_GEM_CMA_HELPER
> +	select DRM_AFBC
>  	select VIDEOMODE_HELPERS
>  	help
>  	  Choose this option if you want to compile the ARM Mali Display
> diff --git a/drivers/gpu/drm/arm/malidp_drv.c b/drivers/gpu/drm/arm/malidp_drv.c
> index f25ec4382277..a67b69e08f63 100644
> --- a/drivers/gpu/drm/arm/malidp_drv.c
> +++ b/drivers/gpu/drm/arm/malidp_drv.c
> @@ -16,6 +16,7 @@
>  #include <linux/debugfs.h>
>  
>  #include <drm/drmP.h>
> +#include <drm/drm_afbc.h>
>  #include <drm/drm_atomic.h>
>  #include <drm/drm_atomic_helper.h>
>  #include <drm/drm_crtc.h>
> @@ -33,8 +34,6 @@
>  #include "malidp_hw.h"
>  
>  #define MALIDP_CONF_VALID_TIMEOUT	250
> -#define AFBC_HEADER_SIZE		16
> -#define AFBC_SUPERBLK_ALIGNMENT		128
>  
>  static void malidp_write_gamma_table(struct malidp_hw_device *hwdev,
>  				     u32 data[MALIDP_COEFFTAB_NUM_COEFFS])
> @@ -275,24 +274,8 @@ malidp_verify_afbc_framebuffer_caps(struct drm_device *dev,
>  					mode_cmd->modifier[0]) == false)
>  		return false;
>  
> -	if (mode_cmd->offsets[0] != 0) {
> -		DRM_DEBUG_KMS("AFBC buffers' plane offset should be 0\n");
> -		return false;
> -	}
> -
> -	switch (mode_cmd->modifier[0] & AFBC_SIZE_MASK) {
> -	case AFBC_SIZE_16X16:
> -		if ((mode_cmd->width % 16) || (mode_cmd->height % 16)) {
> -			DRM_DEBUG_KMS("AFBC buffers must be aligned to 16 pixels\n");
> -			return false;
> -		}
> -		break;
> -	default:
> -		DRM_DEBUG_KMS("Unsupported AFBC block size\n");
> -		return false;
> -	}
> -
> -	return true;
> +	return drm_afbc_check_offset(dev, mode_cmd) &&
> +	       drm_afbc_check_size_align(dev, mode_cmd);
>  }
>  
>  static bool
> @@ -300,53 +283,20 @@ malidp_verify_afbc_framebuffer_size(struct drm_device *dev,
>  				    struct drm_file *file,
>  				    const struct drm_mode_fb_cmd2 *mode_cmd)
>  {
> -	int n_superblocks = 0;
>  	const struct drm_format_info *info;
>  	struct drm_gem_object *objs = NULL;
> -	u32 afbc_superblock_size = 0, afbc_superblock_height = 0;
> -	u32 afbc_superblock_width = 0, afbc_size = 0;
>  	int bpp = 0;
>  
> -	switch (mode_cmd->modifier[0] & AFBC_SIZE_MASK) {
> -	case AFBC_SIZE_16X16:
> -		afbc_superblock_height = 16;
> -		afbc_superblock_width = 16;
> -		break;
> -	default:
> -		DRM_DEBUG_KMS("AFBC superblock size is not supported\n");
> -		return false;
> -	}
> -
>  	info = drm_get_format_info(dev, mode_cmd);
> -
> -	n_superblocks = (mode_cmd->width / afbc_superblock_width) *
> -		(mode_cmd->height / afbc_superblock_height);
> -
>  	bpp = malidp_format_get_bpp(info->format);
>  
> -	afbc_superblock_size = (bpp * afbc_superblock_width * afbc_superblock_height)
> -				/ BITS_PER_BYTE;
> -
> -	afbc_size = ALIGN(n_superblocks * AFBC_HEADER_SIZE, AFBC_SUPERBLK_ALIGNMENT);
> -	afbc_size += n_superblocks * ALIGN(afbc_superblock_size, AFBC_SUPERBLK_ALIGNMENT);
> -
> -	if ((mode_cmd->width * bpp) != (mode_cmd->pitches[0] * BITS_PER_BYTE)) {
> -		DRM_DEBUG_KMS("Invalid value of (pitch * BITS_PER_BYTE) (=%u) "
> -			      "should be same as width (=%u) * bpp (=%u)\n",
> -			      (mode_cmd->pitches[0] * BITS_PER_BYTE),
> -			      mode_cmd->width, bpp);
> -		return false;
> -	}
> -
>  	objs = drm_gem_object_lookup(file, mode_cmd->handles[0]);
>  	if (!objs) {
>  		DRM_DEBUG_KMS("Failed to lookup GEM object\n");
>  		return false;
>  	}
>  
> -	if (objs->size < afbc_size) {
> -		DRM_DEBUG_KMS("buffer size (%zu) too small for AFBC buffer size = %u\n",
> -			      objs->size, afbc_size);
> +	if (!drm_afbc_check_fb_size(dev, mode_cmd, objs, bpp)) {
>  		drm_gem_object_put_unlocked(objs);
>  		return false;
>  	}
Also can you do the code refactoring for komeda driver as well.
specifically komeda_fb_afbc_size_check(). I will let
james.qian.wang@arm.com and Mihail.Atanassov@arm.com have their
opinion on this.

> diff --git a/drivers/gpu/drm/drm_afbc.c b/drivers/gpu/drm/drm_afbc.c
> new file mode 100644
> index 000000000000..3e8a9225fd2e
> --- /dev/null
> +++ b/drivers/gpu/drm/drm_afbc.c
> @@ -0,0 +1,114 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * (C) 2019 Collabora Ltd.
> + *
> + * author: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
> + *
> + */
> +#include <linux/module.h>
> +
> +#include <drm/drm_afbc.h>
> +#include <drm/drm_device.h>
> +#include <drm/drm_fourcc.h>
> +#include <drm/drm_gem.h>
> +#include <drm/drm_mode.h>
> +#include <drm/drm_print.h>
> +
> +#define AFBC_HEADER_SIZE		16
> +#define AFBC_SUPERBLK_ALIGNMENT		128
> +
> +bool drm_afbc_check_offset(struct drm_device *dev,
> +			   const struct drm_mode_fb_cmd2 *mode_cmd)
> +{
> +	if (mode_cmd->offsets[0] != 0) {
> +		DRM_DEBUG_KMS("AFBC buffers' plane offset should be 0\n");
> +		return false;
> +	}
> +
> +	return true;
> +}
> +EXPORT_SYMBOL_GPL(drm_afbc_check_offset);
> +
> +bool drm_afbc_check_size_align(struct drm_device *dev,
> +			       const struct drm_mode_fb_cmd2 *mode_cmd)
> +{
> +
> +	switch (mode_cmd->modifier[0] & AFBC_FORMAT_MOD_BLOCK_SIZE_MASK) {
> +	case AFBC_FORMAT_MOD_BLOCK_SIZE_16x16:
> +		if ((mode_cmd->width % 16) || (mode_cmd->height % 16)) {
> +			DRM_DEBUG_KMS(
> +				"AFBC buffer must be aligned to 16 pixels\n"
> +			);
> +			return false;
> +		}
> +		break;
> +	case AFBC_FORMAT_MOD_BLOCK_SIZE_32x8:
> +		/* fall through */
> +	case AFBC_FORMAT_MOD_BLOCK_SIZE_64x4:
> +		/* fall through */
> +	case AFBC_FORMAT_MOD_BLOCK_SIZE_32x8_64x4:
> +		/* fall through */
> +	default:
> +		DRM_DEBUG_KMS("Unsupported AFBC block size\n");
> +		return false;
> +	}
> +
> +	return true;
> +}
> +EXPORT_SYMBOL_GPL(drm_afbc_check_size_align);
> +
> +bool drm_afbc_check_fb_size(struct drm_device *dev,
> +			    const struct drm_mode_fb_cmd2 *mode_cmd,
> +			    struct drm_gem_object *objs, int bpp)
> +{
> +	int n_superblocks = 0;
> +	u32 afbc_superblock_size = 0, afbc_superblock_height = 0;
> +	u32 afbc_superblock_width = 0, afbc_size = 0;
> +
> +	switch (mode_cmd->modifier[0] & AFBC_FORMAT_MOD_BLOCK_SIZE_MASK) {
> +	case AFBC_FORMAT_MOD_BLOCK_SIZE_16x16:
> +		afbc_superblock_height = 16;
> +		afbc_superblock_width = 16;
> +		break;
> +	case AFBC_FORMAT_MOD_BLOCK_SIZE_32x8:
Copying from
https://cgit.freedesktop.org/drm/drm-tip/tree/drivers/gpu/drm/arm/display/komeda/komeda_framebuffer.c#n60
                afbc_superblock_width = 32;
                afbc_superblock_height = 8;
> +		/* fall through */
> +	case AFBC_FORMAT_MOD_BLOCK_SIZE_64x4:
> +		/* fall through */
> +	case AFBC_FORMAT_MOD_BLOCK_SIZE_32x8_64x4:
> +		/* fall through */
> +	default:
> +		DRM_DEBUG_KMS("AFBC superblock size is not supported\n");
> +		return false;
> +	}
Can you combine the two switch - case confitions (from this function
and the one in drm_afbc_check_size_align()) and put it in a separate
function (say drm_afbc_get_superblock_dimensions()) of its own ?
This will help to avoid code repetition.

> +
> +	n_superblocks = (mode_cmd->width / afbc_superblock_width) *
> +		(mode_cmd->height / afbc_superblock_height);
> +
> +	afbc_superblock_size =
> +		(bpp * afbc_superblock_width * afbc_superblock_height)
> +			/ BITS_PER_BYTE;
> +
> +	afbc_size = ALIGN(n_superblocks * AFBC_HEADER_SIZE,
> +			  AFBC_SUPERBLK_ALIGNMENT);
> +	afbc_size += n_superblocks *
> +		ALIGN(afbc_superblock_size, AFBC_SUPERBLK_ALIGNMENT);
> +
> +	if ((mode_cmd->width * bpp) != (mode_cmd->pitches[0] * BITS_PER_BYTE)) {
> +		DRM_DEBUG_KMS("Invalid value of (pitch * BITS_PER_BYTE) (=%u) should be same as width (=%u) * bpp (=%u)\n",
> +			mode_cmd->pitches[0] * BITS_PER_BYTE,
> +			mode_cmd->width, bpp
> +		);
> +		return false;
> +	}
> +
> +	if (objs->size < afbc_size) {
> +		DRM_DEBUG_KMS("buffer size (%zu) too small for AFBC buffer size = %u\n",
> +			objs->size, afbc_size
> +		);
> +
> +		return false;
> +	}
> +
> +	return true;
> +}
> +EXPORT_SYMBOL(drm_afbc_check_fb_size);
> diff --git a/include/drm/drm_afbc.h b/include/drm/drm_afbc.h
> new file mode 100644
> index 000000000000..ce39c850217b
> --- /dev/null
> +++ b/include/drm/drm_afbc.h
> @@ -0,0 +1,25 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * (C) 2019 Collabora Ltd.
> + *
> + * author: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
> + *
> + */
> +#ifndef __DRM_AFBC_H__
> +#define __DRM_AFBC_H__
> +
> +struct drm_device;
> +struct drm_mode_fb_cmd2;
> +struct drm_gem_object;
> +
> +bool drm_afbc_check_offset(struct drm_device *dev,
> +			   const struct drm_mode_fb_cmd2 *mode_cmd);
> +
> +bool drm_afbc_check_size_align(struct drm_device *dev,
> +			       const struct drm_mode_fb_cmd2 *mode_cmd);
> +
> +bool drm_afbc_check_fb_size(struct drm_device *dev,
> +			    const struct drm_mode_fb_cmd2 *mode_cmd,
> +			    struct drm_gem_object *objs, int bpp);
> +
> +#endif /* __DRM_AFBC_H__ */
> --
> 2.17.1
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2019-10-21 13:50 UTC|newest]

Thread overview: 63+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-11 11:18 [PATCH 0/2] AFBC for Rockchip Andrzej Pietrasiewicz
2019-10-11 11:18 ` Andrzej Pietrasiewicz
2019-10-11 11:18 ` [PATCH 1/2] drm/arm: Factor out generic afbc helpers Andrzej Pietrasiewicz
2019-10-11 11:18   ` Andrzej Pietrasiewicz
2019-10-21 13:50   ` Ayan Halder [this message]
2019-10-21 13:50     ` Ayan Halder
2019-10-21 13:50     ` Ayan Halder
2019-10-21 14:41     ` Mihail Atanassov
2019-10-21 14:41       ` Mihail Atanassov
2019-10-21 14:41       ` Mihail Atanassov
2019-11-04 22:12       ` [PATCHv2 0/4] AFBC support for Rockchip Andrzej Pietrasiewicz
2019-11-04 22:12         ` [PATCHv2 1/4] drm/arm: Factor out generic afbc helpers Andrzej Pietrasiewicz
2019-11-05  9:22           ` Daniel Vetter
2019-11-06 12:45             ` Andrzej Pietrasiewicz
2019-11-07  8:27               ` Daniel Vetter
2019-11-05 23:26           ` Daniel Stone
2019-11-05 23:26             ` Daniel Stone
2019-11-06 10:28             ` Liviu Dudau
2019-11-07 17:20             ` Brian Starkey
2019-11-07 17:20               ` Brian Starkey
2019-11-07 17:32               ` Daniel Vetter
2019-11-07 17:32                 ` Daniel Vetter
2019-11-07 17:49                 ` Brian Starkey
2019-11-07 17:49                   ` Brian Starkey
2019-11-07 19:28                   ` Daniel Vetter
2019-11-07 19:28                     ` Daniel Vetter
2019-11-08  9:46                     ` Brian Starkey
2019-11-08  9:46                       ` Brian Starkey
2019-11-04 22:12         ` [PATCHv2 2/4] drm/malidp: use " Andrzej Pietrasiewicz
2019-11-06 11:09           ` Liviu Dudau
2019-11-04 22:12         ` [PATCHv2 3/4] drm/komeda: " Andrzej Pietrasiewicz
2019-11-08 16:09           ` Ayan Halder
2019-11-08 16:09             ` Ayan Halder
2019-11-13  2:01             ` james qian wang (Arm Technology China)
2019-11-13 11:39               ` Daniel Vetter
2019-11-14  1:52                 ` james qian wang (Arm Technology China)
2019-11-14 10:12                   ` Daniel Vetter
2019-11-18  7:09                     ` james qian wang (Arm Technology China)
2019-11-18  9:51                       ` Daniel Vetter
     [not found]                         ` <20191118095136.GC23790-dv86pmgwkMBes7Z6vYuT8azUEOm+Xw19@public.gmane.org>
2019-11-19  8:34                           ` james qian wang (Arm Technology China)
2019-11-19  8:34                             ` james qian wang (Arm Technology China)
2019-11-21 17:22                             ` [PATCHv3/RFC 0/4] AFBC rework and support for Rockchip Andrzej Pietrasiewicz
2019-11-21 17:22                               ` [PATCHv3/RFC 1/4] drm/arm: Factor out generic afbc helpers Andrzej Pietrasiewicz
2019-11-23  7:13                                 ` Ezequiel Garcia
2019-11-23  7:13                                   ` Ezequiel Garcia
2019-11-24 10:11                                 ` kbuild test robot
2019-11-25  8:55                                 ` Daniel Vetter
2019-11-26 20:27                                   ` Andrzej Pietrasiewicz
2019-11-27  9:51                                     ` Daniel Vetter
2019-11-28 10:47                                   ` james qian wang (Arm Technology China)
2019-11-21 17:22                               ` [PATCHv3/RFC 2/4] drm/malidp: use " Andrzej Pietrasiewicz
2019-11-21 17:22                               ` [PATCHv3/RFC 3/4] drm/komeda: Use afbc helper Andrzej Pietrasiewicz
2019-11-21 17:22                               ` [PATCHv3/RFC 4/4] drm/rockchip: Add support for afbc Andrzej Pietrasiewicz
2019-11-23  7:21                                 ` Ezequiel Garcia
2019-11-23  7:21                                   ` Ezequiel Garcia
2019-11-04 22:12         ` [PATCHv2 " Andrzej Pietrasiewicz
2019-11-05 23:34           ` Daniel Stone
2019-11-05 23:34             ` Daniel Stone
2019-10-11 11:18 ` [PATCH 2/2] " Andrzej Pietrasiewicz
2019-10-11 11:18   ` Andrzej Pietrasiewicz
2019-10-11 11:59   ` Daniel Stone
2019-10-11 11:59     ` Daniel Stone
2019-10-11 11:59     ` Daniel Stone

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191021135013.GA16072@arm.com \
    --to=ayan.halder@arm.com \
    --cc=Liviu.Dudau@arm.com \
    --cc=Mihail.Atanassov@arm.com \
    --cc=airlied@linux.ie \
    --cc=andrzej.p@collabora.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=james.qian.wang@arm.com \
    --cc=kernel@collabora.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=nd@arm.com \
    --cc=sean@poorly.run \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.