[PATCH] ubi: fastmap: fix inverted logic in seen selfcheck

[PATCH] ubi: fastmap: fix inverted logic in seen selfcheck

[Sascha Hauer]

set_seen() sets the bit corresponding to the PEB number in the bitmap,
so when self_check_seen() wants to find PEBs that haven't been seen we
have to print the PEBs that have their bit cleared, not the ones which
have it set.

Fixes: 5d71afb00840 ("ubi: Use bitmaps in Fastmap self-check code")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/mtd/ubi/fastmap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/ubi/fastmap.c b/drivers/mtd/ubi/fastmap.c
index 30621c67721a..b74888b5c2d6 100644
--- a/drivers/mtd/ubi/fastmap.c
+++ b/drivers/mtd/ubi/fastmap.c
@@ -64,7 +64,7 @@ static int self_check_seen(struct ubi_device *ubi, unsigned long *seen)
 		return 0;
 
 	for (pnum = 0; pnum < ubi->peb_count; pnum++) {
-		if (test_bit(pnum, seen) && ubi->lookuptbl[pnum]) {
+		if (!test_bit(pnum, seen) && ubi->lookuptbl[pnum]) {
 			ubi_err(ubi, "self-check failed for PEB %d, fastmap didn't see it", pnum);
 			ret = -EINVAL;
 		}
-- 
2.23.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/