From: Logan Gunthorpe <logang@deltatee.com> To: linux-kernel@vger.kernel.org, linux-nvme@lists.infradead.org Cc: Christoph Hellwig <hch@lst.de>, Sagi Grimberg <sagi@grimberg.me>, Chaitanya Kulkarni <Chaitanya.Kulkarni@wdc.com>, Max Gurtovoy <maxg@mellanox.com>, Stephen Bates <sbates@raithlin.com>, Logan Gunthorpe <logang@deltatee.com> Subject: [PATCH 0/7] Remove data_len field from the nvmet_req struct Date: Wed, 23 Oct 2019 10:35:38 -0600 [thread overview] Message-ID: <20191023163545.4193-1-logang@deltatee.com> (raw) Hi, This patchset is a cleanup in preparation for the passthru patchset. The aim is to remove the data_len field in the nvmet_req struct and instead just check the length is appropriate inside the execute handlers. This is more appropriate for passthru which may have commands with unknown lengths (like Vendor Specific Commands). It's also in improvement seeing it can often be confusing when it's best to use the data_len field over the transfer_len field. The first two patches in this series remove some questionable uses of the data_len field in nvmt-tcp Most of this patchset was extracted from a draft patch from Christoph[1]. The series is based on v5.4-rc4 and a git branch is available here: https://github.com/sbates130272/linux-p2pmem/branches nvmet_data_len Logan [1] https://lore.kernel.org/linux-block/20191010110425.GA28372@lst.de/ -- Logan Gunthorpe (7): nvmet-tcp: Don't check data_len in nvmet_tcp_map_data() nvmet-tcp: Don't set the request's data_len nvmet: Introduce common execute function for get_log_page and identify nvmet: Cleanup discovery execute handlers nvmet: Introduce nvmet_dsm_len() helper nvmet: Remove the data_len field from the nvmet_req struct nvmet: Open code nvmet_req_execute() drivers/nvme/target/admin-cmd.c | 128 +++++++++++++++++------------- drivers/nvme/target/core.c | 12 +-- drivers/nvme/target/discovery.c | 62 +++++++-------- drivers/nvme/target/fabrics-cmd.c | 15 +++- drivers/nvme/target/fc.c | 4 +- drivers/nvme/target/io-cmd-bdev.c | 19 +++-- drivers/nvme/target/io-cmd-file.c | 20 +++-- drivers/nvme/target/loop.c | 2 +- drivers/nvme/target/nvmet.h | 10 ++- drivers/nvme/target/rdma.c | 4 +- drivers/nvme/target/tcp.c | 14 ++-- 11 files changed, 167 insertions(+), 123 deletions(-) -- 2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Logan Gunthorpe <logang@deltatee.com> To: linux-kernel@vger.kernel.org, linux-nvme@lists.infradead.org Cc: Sagi Grimberg <sagi@grimberg.me>, Chaitanya Kulkarni <Chaitanya.Kulkarni@wdc.com>, Stephen Bates <sbates@raithlin.com>, Max Gurtovoy <maxg@mellanox.com>, Logan Gunthorpe <logang@deltatee.com>, Christoph Hellwig <hch@lst.de> Subject: [PATCH 0/7] Remove data_len field from the nvmet_req struct Date: Wed, 23 Oct 2019 10:35:38 -0600 [thread overview] Message-ID: <20191023163545.4193-1-logang@deltatee.com> (raw) Hi, This patchset is a cleanup in preparation for the passthru patchset. The aim is to remove the data_len field in the nvmet_req struct and instead just check the length is appropriate inside the execute handlers. This is more appropriate for passthru which may have commands with unknown lengths (like Vendor Specific Commands). It's also in improvement seeing it can often be confusing when it's best to use the data_len field over the transfer_len field. The first two patches in this series remove some questionable uses of the data_len field in nvmt-tcp Most of this patchset was extracted from a draft patch from Christoph[1]. The series is based on v5.4-rc4 and a git branch is available here: https://github.com/sbates130272/linux-p2pmem/branches nvmet_data_len Logan [1] https://lore.kernel.org/linux-block/20191010110425.GA28372@lst.de/ -- Logan Gunthorpe (7): nvmet-tcp: Don't check data_len in nvmet_tcp_map_data() nvmet-tcp: Don't set the request's data_len nvmet: Introduce common execute function for get_log_page and identify nvmet: Cleanup discovery execute handlers nvmet: Introduce nvmet_dsm_len() helper nvmet: Remove the data_len field from the nvmet_req struct nvmet: Open code nvmet_req_execute() drivers/nvme/target/admin-cmd.c | 128 +++++++++++++++++------------- drivers/nvme/target/core.c | 12 +-- drivers/nvme/target/discovery.c | 62 +++++++-------- drivers/nvme/target/fabrics-cmd.c | 15 +++- drivers/nvme/target/fc.c | 4 +- drivers/nvme/target/io-cmd-bdev.c | 19 +++-- drivers/nvme/target/io-cmd-file.c | 20 +++-- drivers/nvme/target/loop.c | 2 +- drivers/nvme/target/nvmet.h | 10 ++- drivers/nvme/target/rdma.c | 4 +- drivers/nvme/target/tcp.c | 14 ++-- 11 files changed, 167 insertions(+), 123 deletions(-) -- 2.20.1 _______________________________________________ Linux-nvme mailing list Linux-nvme@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-nvme
next reply other threads:[~2019-10-23 16:36 UTC|newest] Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-10-23 16:35 Logan Gunthorpe [this message] 2019-10-23 16:35 ` [PATCH 0/7] Remove data_len field from the nvmet_req struct Logan Gunthorpe 2019-10-23 16:35 ` [PATCH 1/7] nvmet-tcp: Don't check data_len in nvmet_tcp_map_data() Logan Gunthorpe 2019-10-23 16:35 ` Logan Gunthorpe 2019-10-24 1:15 ` Christoph Hellwig 2019-10-24 1:15 ` Christoph Hellwig 2019-10-23 16:35 ` [PATCH 2/7] nvmet-tcp: Don't set the request's data_len Logan Gunthorpe 2019-10-23 16:35 ` Logan Gunthorpe 2019-10-24 1:15 ` Christoph Hellwig 2019-10-24 1:15 ` Christoph Hellwig 2019-10-23 16:35 ` [PATCH 3/7] nvmet: Introduce common execute function for get_log_page and identify Logan Gunthorpe 2019-10-23 16:35 ` Logan Gunthorpe 2019-10-23 20:31 ` Chaitanya Kulkarni 2019-10-23 20:31 ` Chaitanya Kulkarni 2019-10-24 1:17 ` Christoph Hellwig 2019-10-24 1:17 ` Christoph Hellwig 2019-10-24 17:18 ` Logan Gunthorpe 2019-10-24 17:18 ` Logan Gunthorpe 2019-10-24 22:01 ` Keith Busch 2019-10-24 22:01 ` Keith Busch 2019-10-24 22:40 ` Logan Gunthorpe 2019-10-24 22:40 ` Logan Gunthorpe 2019-10-23 16:35 ` [PATCH 4/7] nvmet: Cleanup discovery execute handlers Logan Gunthorpe 2019-10-23 16:35 ` Logan Gunthorpe 2019-10-23 16:35 ` [PATCH 5/7] nvmet: Introduce nvmet_dsm_len() helper Logan Gunthorpe 2019-10-23 16:35 ` Logan Gunthorpe 2019-10-23 20:31 ` Chaitanya Kulkarni 2019-10-23 20:31 ` Chaitanya Kulkarni 2019-10-23 16:35 ` [PATCH 6/7] nvmet: Remove the data_len field from the nvmet_req struct Logan Gunthorpe 2019-10-23 16:35 ` Logan Gunthorpe 2019-10-23 16:35 ` [PATCH 7/7] nvmet: Open code nvmet_req_execute() Logan Gunthorpe 2019-10-23 16:35 ` Logan Gunthorpe 2019-10-23 20:34 ` Chaitanya Kulkarni 2019-10-23 20:34 ` Chaitanya Kulkarni 2019-10-25 0:20 ` [PATCH 0/7] Remove data_len field from the nvmet_req struct Keith Busch 2019-10-25 0:20 ` Keith Busch
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20191023163545.4193-1-logang@deltatee.com \ --to=logang@deltatee.com \ --cc=Chaitanya.Kulkarni@wdc.com \ --cc=hch@lst.de \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-nvme@lists.infradead.org \ --cc=maxg@mellanox.com \ --cc=sagi@grimberg.me \ --cc=sbates@raithlin.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.