From: Heiko Stuebner <heiko@sntech.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 01/12] spl: separate SPL_FRAMEWORK config for spl and tpl
Date: Fri, 25 Oct 2019 01:27:52 +0200 [thread overview]
Message-ID: <20191024232803.10338-2-heiko@sntech.de> (raw)
In-Reply-To: <20191024232803.10338-1-heiko@sntech.de>
From: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Right now enabling SPL_FRAMEWORK will also enable it for the TPL in all
cases, making the TPL bigger. There may be cases where the TPL is really
size constrained due to its underlying ram size.
Therefore introduce a new TPL_FRAMEWORK option and make the relevant
conditionals check for both. The default is set to "y if SPL_FRAMEWORK"
to mimic the previous behaviour where the TPL would always get the
SPL framework if it was enabled in SPL.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
---
arch/arm/lib/Makefile | 2 +-
arch/arm/lib/crt0.S | 2 +-
arch/arm/lib/crt0_64.S | 2 ++
arch/powerpc/lib/Makefile | 2 +-
common/spl/Kconfig | 8 ++++++++
common/spl/Makefile | 2 +-
scripts/Makefile.spl | 4 ++++
7 files changed, 18 insertions(+), 4 deletions(-)
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 48ee6c3c60..9de9a9acee 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -35,7 +35,7 @@ obj-$(CONFIG_CMD_BOOTM) += bootm.o
obj-$(CONFIG_CMD_BOOTZ) += bootm.o zimage.o
obj-$(CONFIG_SYS_L2_PL310) += cache-pl310.o
else
-obj-$(CONFIG_SPL_FRAMEWORK) += spl.o
+obj-$(CONFIG_$(SPL_TPL_)FRAMEWORK) += spl.o
obj-$(CONFIG_SPL_FRAMEWORK) += zimage.o
obj-$(CONFIG_OF_LIBFDT) += bootm-fdt.o
endif
diff --git a/arch/arm/lib/crt0.S b/arch/arm/lib/crt0.S
index c74641dcd9..fb6c37cf51 100644
--- a/arch/arm/lib/crt0.S
+++ b/arch/arm/lib/crt0.S
@@ -149,7 +149,7 @@ here:
bl c_runtime_cpu_setup /* we still call old routine here */
#endif
-#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_FRAMEWORK)
+#if !defined(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(FRAMEWORK)
#if !defined(CONFIG_SPL_EARLY_BSS)
SPL_CLEAR_BSS
diff --git a/arch/arm/lib/crt0_64.S b/arch/arm/lib/crt0_64.S
index e76b25a03e..04afa518ac 100644
--- a/arch/arm/lib/crt0_64.S
+++ b/arch/arm/lib/crt0_64.S
@@ -120,6 +120,7 @@ relocation_return:
*/
bl c_runtime_cpu_setup /* still call old routine */
#endif /* !CONFIG_SPL_BUILD */
+#if !defined(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(FRAMEWORK)
#if defined(CONFIG_SPL_BUILD)
bl spl_relocate_stack_gd /* may return NULL */
/* set up gd here, outside any C code, if new stack is returned */
@@ -152,5 +153,6 @@ clear_loop:
b board_init_r /* PC relative jump */
/* NOTREACHED - board_init_r() does not return */
+#endif
ENDPROC(_main)
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 8ac49bdd06..01c9dd51be 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -41,5 +41,5 @@ obj-y += time.o
endif # not minimal
ifdef CONFIG_SPL_BUILD
-obj-$(CONFIG_SPL_FRAMEWORK) += spl.o
+obj-$(CONFIG_$(SPL_TPL)_FRAMEWORK) += spl.o
endif
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index f467eca2be..4d5c4ddc46 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -1183,6 +1183,14 @@ config TPL
if TPL
+config TPL_FRAMEWORK
+ bool "Support TPL based upon the common SPL framework"
+ default y if SPL_FRAMEWORK
+ help
+ Enable the SPL framework under common/spl/ for TPL builds.
+ This framework supports MMC, NAND and YMODEM and other methods
+ loading of U-Boot's SPL stage. If unsure, say Y.
+
config TPL_HANDOFF
bool "Pass hand-off information from TPL to SPL and U-Boot proper"
depends on HANDOFF
diff --git a/common/spl/Makefile b/common/spl/Makefile
index 5ce6f4ae48..eaa57f5ce5 100644
--- a/common/spl/Makefile
+++ b/common/spl/Makefile
@@ -7,7 +7,7 @@
#
ifdef CONFIG_SPL_BUILD
-obj-$(CONFIG_SPL_FRAMEWORK) += spl.o
+obj-$(CONFIG_$(SPL_TPL_)FRAMEWORK) += spl.o
obj-$(CONFIG_$(SPL_TPL_)BOOTROM_SUPPORT) += spl_bootrom.o
obj-$(CONFIG_$(SPL_TPL_)LOAD_FIT) += spl_fit.o
obj-$(CONFIG_$(SPL_TPL_)NOR_SUPPORT) += spl_nor.o
diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
index 7af6b120b6..090c831710 100644
--- a/scripts/Makefile.spl
+++ b/scripts/Makefile.spl
@@ -71,7 +71,11 @@ HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makef
libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
+ifeq ($(CONFIG_TPL_BUILD),y)
+libs-$(CONFIG_TPL_FRAMEWORK) += common/spl/
+else
libs-$(CONFIG_SPL_FRAMEWORK) += common/spl/
+endif
libs-y += common/init/
# Special handling for a few options which support SPL/TPL
--
2.23.0
next prev parent reply other threads:[~2019-10-24 23:27 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-24 23:27 [U-Boot] [PATCH 00/12] rockchip: add support for px30 Heiko Stuebner
2019-10-24 23:27 ` Heiko Stuebner [this message]
2019-10-25 1:55 ` [U-Boot] [PATCH 01/12] spl: separate SPL_FRAMEWORK config for spl and tpl Kever Yang
2019-10-24 23:27 ` [U-Boot] [PATCH 02/12] rockchip: add core px30 headers Heiko Stuebner
2019-10-25 2:04 ` Kever Yang
2019-10-24 23:27 ` [U-Boot] [PATCH 03/12] pinctrl: rockchip: add px30 pinctrl driver Heiko Stuebner
2019-10-25 2:07 ` Kever Yang
2019-10-24 23:27 ` [U-Boot] [PATCH 04/12] rockchip: clk: add px30 clock driver Heiko Stuebner
2019-10-24 23:27 ` [U-Boot] [PATCH 05/12] net: gmac_rockchip: add support for px30 Heiko Stuebner
2019-10-25 2:09 ` Kever Yang
2019-10-24 23:27 ` [U-Boot] [PATCH 06/12] rockchip: mkimage: " Heiko Stuebner
2019-10-25 2:09 ` Kever Yang
2019-10-24 23:27 ` [U-Boot] [PATCH 07/12] misc: add driver for the Rockchip otp controller Heiko Stuebner
2019-10-25 2:10 ` Kever Yang
2019-10-24 23:27 ` [U-Boot] [PATCH 08/12] rockchip: misc: read cpuid either from efuse or otp Heiko Stuebner
2019-10-25 2:11 ` Kever Yang
2019-10-24 23:28 ` [U-Boot] [PATCH 09/12] rockchip: ram: add dm-based sdram driver Heiko Stuebner
2019-10-24 23:28 ` [U-Boot] [PATCH 10/12] rockchip: add px30 devicetrees Heiko Stuebner
2019-10-25 2:39 ` Kever Yang
2019-10-24 23:28 ` [U-Boot] [PATCH 11/12] rockchip: add px30 architecture core Heiko Stuebner
2019-10-25 2:49 ` Kever Yang
2019-10-25 7:47 ` Heiko Stübner
2019-11-10 14:13 ` Kever Yang
2019-11-10 14:46 ` Heiko Stuebner
2019-10-24 23:28 ` [U-Boot] [PATCH 12/12] rockchip: add px30-evb board Heiko Stuebner
2019-10-25 2:51 ` Kever Yang
2019-10-25 1:44 ` [U-Boot] [PATCH 00/12] rockchip: add support for px30 Kever Yang
2019-11-18 2:57 ` Kever Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191024232803.10338-2-heiko@sntech.de \
--to=heiko@sntech.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.