* [PATCH 08/16] dyndbg: refactor parse_linerange out of ddebug_parse_query
@ 2019-10-29 20:00 Jim Cromie
0 siblings, 0 replies; 2+ messages in thread
From: Jim Cromie @ 2019-10-29 20:00 UTC (permalink / raw)
To: jbaron, linux-kernel; +Cc: linux, greg, Jim Cromie
make the code-block reusable to handle "file foo.c:101-200" etc.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
---
lib/dynamic_debug.c | 61 +++++++++++++++++++++++++--------------------
1 file changed, 34 insertions(+), 27 deletions(-)
diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c
index 3ac77c49d623..2d0aad5af972 100644
--- a/lib/dynamic_debug.c
+++ b/lib/dynamic_debug.c
@@ -277,6 +277,39 @@ static inline int parse_lineno(const char *str, unsigned int *val)
return 0;
}
+static int parse_linerange(struct ddebug_query *query, const char *first)
+{
+ char *last = strchr(first, '-');
+
+ if (query->first_lineno || query->last_lineno) {
+ pr_err("match-spec: line used 2x\n");
+ return -EINVAL;
+ }
+ if (last)
+ *last++ = '\0';
+ if (parse_lineno(first, &query->first_lineno) < 0)
+ return -EINVAL;
+ if (last) {
+ /* range <first>-<last> */
+ if (parse_lineno(last, &query->last_lineno) < 0)
+ return -EINVAL;
+
+ /* special case for last lineno not specified */
+ if (query->last_lineno == 0)
+ query->last_lineno = UINT_MAX;
+
+ if (query->last_lineno < query->first_lineno) {
+ pr_err("last-line:%d < 1st-line:%d\n",
+ query->last_lineno,
+ query->first_lineno);
+ return -EINVAL;
+ }
+ } else {
+ query->last_lineno = query->first_lineno;
+ }
+ return 0;
+}
+
static int check_set(const char **dest, char *src, char *name)
{
int rc = 0;
@@ -335,34 +368,8 @@ static int ddebug_parse_query(char *words[], int nwords,
UNESCAPE_SPECIAL);
rc = check_set(&query->format, words[i+1], "format");
} else if (!strcmp(words[i], "line")) {
- char *first = words[i+1];
- char *last = strchr(first, '-');
- if (query->first_lineno || query->last_lineno) {
- pr_err("match-spec: line used 2x\n");
+ if (parse_linerange(query, words[i+1]))
return -EINVAL;
- }
- if (last)
- *last++ = '\0';
- if (parse_lineno(first, &query->first_lineno) < 0)
- return -EINVAL;
- if (last) {
- /* range <first>-<last> */
- if (parse_lineno(last, &query->last_lineno) < 0)
- return -EINVAL;
-
- /* special case for last lineno not specified */
- if (query->last_lineno == 0)
- query->last_lineno = UINT_MAX;
-
- if (query->last_lineno < query->first_lineno) {
- pr_err("last-line:%d < 1st-line:%d\n",
- query->last_lineno,
- query->first_lineno);
- return -EINVAL;
- }
- } else {
- query->last_lineno = query->first_lineno;
- }
} else {
pr_err("unknown keyword \"%s\"\n", words[i]);
return -EINVAL;
--
2.21.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH 08/16] dyndbg: refactor parse_linerange out of ddebug_parse_query
2020-06-05 16:26 [PATCH 00/16] dynamic_debug: cleanups, 2 features Jim Cromie
@ 2020-06-05 16:26 ` Jim Cromie
0 siblings, 0 replies; 2+ messages in thread
From: Jim Cromie @ 2020-06-05 16:26 UTC (permalink / raw)
To: jbaron, linux-kernel, akpm, gregkh; +Cc: linux, Jim Cromie
make the code-block reusable to later handle "file foo.c:101-200" etc.
This should be a 90%+ code-move, with minimal adaptations; reindent,
and scafolding.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
---
lib/dynamic_debug.c | 61 +++++++++++++++++++++++++--------------------
1 file changed, 34 insertions(+), 27 deletions(-)
diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c
index 494856c04fa7..d43bc3547d3a 100644
--- a/lib/dynamic_debug.c
+++ b/lib/dynamic_debug.c
@@ -291,6 +291,39 @@ static inline int parse_lineno(const char *str, unsigned int *val)
return 0;
}
+static int parse_linerange(struct ddebug_query *query, const char *first)
+{
+ char *last = strchr(first, '-');
+
+ if (query->first_lineno || query->last_lineno) {
+ pr_err("match-spec: line used 2x\n");
+ return -EINVAL;
+ }
+ if (last)
+ *last++ = '\0';
+ if (parse_lineno(first, &query->first_lineno) < 0)
+ return -EINVAL;
+ if (last) {
+ /* range <first>-<last> */
+ if (parse_lineno(last, &query->last_lineno) < 0)
+ return -EINVAL;
+
+ /* special case for last lineno not specified */
+ if (query->last_lineno == 0)
+ query->last_lineno = UINT_MAX;
+
+ if (query->last_lineno < query->first_lineno) {
+ pr_err("last-line:%d < 1st-line:%d\n",
+ query->last_lineno,
+ query->first_lineno);
+ return -EINVAL;
+ }
+ } else {
+ query->last_lineno = query->first_lineno;
+ }
+ return 0;
+}
+
static int check_set(const char **dest, char *src, char *name)
{
int rc = 0;
@@ -349,34 +382,8 @@ static int ddebug_parse_query(char *words[], int nwords,
UNESCAPE_SPECIAL);
rc = check_set(&query->format, words[i+1], "format");
} else if (!strcmp(words[i], "line")) {
- char *first = words[i+1];
- char *last = strchr(first, '-');
- if (query->first_lineno || query->last_lineno) {
- pr_err("match-spec: line used 2x\n");
- return -EINVAL;
- }
- if (last)
- *last++ = '\0';
- if (parse_lineno(first, &query->first_lineno) < 0)
+ if (parse_linerange(query, words[i+1]))
return -EINVAL;
- if (last) {
- /* range <first>-<last> */
- if (parse_lineno(last, &query->last_lineno) < 0)
- return -EINVAL;
-
- /* special case for last lineno not specified */
- if (query->last_lineno == 0)
- query->last_lineno = UINT_MAX;
-
- if (query->last_lineno < query->first_lineno) {
- pr_err("last-line:%d < 1st-line:%d\n",
- query->last_lineno,
- query->first_lineno);
- return -EINVAL;
- }
- } else {
- query->last_lineno = query->first_lineno;
- }
} else {
pr_err("unknown keyword \"%s\"\n", words[i]);
return -EINVAL;
--
2.26.2
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-06-05 16:28 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-29 20:00 [PATCH 08/16] dyndbg: refactor parse_linerange out of ddebug_parse_query Jim Cromie
2020-06-05 16:26 [PATCH 00/16] dynamic_debug: cleanups, 2 features Jim Cromie
2020-06-05 16:26 ` [PATCH 08/16] dyndbg: refactor parse_linerange out of ddebug_parse_query Jim Cromie
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.