From: Angelo Dureghello <angelo.dureghello@timesys.com>
To: vigneshr@ti.com, richard@nod.at, miquel.raynal@bootlin.com
Cc: linux-mtd@lists.infradead.org, angelo.dureghello@timesys.com
Subject: [PATCH] mtd: devices: fix mchp23k256 read and write
Date: Wed, 30 Oct 2019 12:39:57 +0100 [thread overview]
Message-ID: <20191030113957.1625342-1-angelo.dureghello@timesys.com> (raw)
Due to the use of sizeof(), command size set for the spi transfer
was wrong. Driver was sending and receiving always 1 byte less
and especially on write, it was hanging.
echo -n -e "\\x1\\x2\\x3\\x4" > /dev/mtd1
And read part too now works as expected.
hexdump -C -n16 /dev/mtd1
00000000 01 02 03 04 ab f3 ad c2 ab e3 f4 36 dd 38 04 15
00000010
Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com>
---
drivers/mtd/devices/mchp23k256.c | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
diff --git a/drivers/mtd/devices/mchp23k256.c b/drivers/mtd/devices/mchp23k256.c
index b20d02b4f830..77c872fd3d83 100644
--- a/drivers/mtd/devices/mchp23k256.c
+++ b/drivers/mtd/devices/mchp23k256.c
@@ -64,15 +64,17 @@ static int mchp23k256_write(struct mtd_info *mtd, loff_t to, size_t len,
struct spi_transfer transfer[2] = {};
struct spi_message message;
unsigned char command[MAX_CMD_SIZE];
- int ret;
+ int ret, cmd_len;
spi_message_init(&message);
+ cmd_len = mchp23k256_cmdsz(flash);
+
command[0] = MCHP23K256_CMD_WRITE;
mchp23k256_addr2cmd(flash, to, command);
transfer[0].tx_buf = command;
- transfer[0].len = mchp23k256_cmdsz(flash);
+ transfer[0].len = cmd_len;
spi_message_add_tail(&transfer[0], &message);
transfer[1].tx_buf = buf;
@@ -88,8 +90,8 @@ static int mchp23k256_write(struct mtd_info *mtd, loff_t to, size_t len,
if (ret)
return ret;
- if (retlen && message.actual_length > sizeof(command))
- *retlen += message.actual_length - sizeof(command);
+ if (retlen && message.actual_length > cmd_len)
+ *retlen += message.actual_length - cmd_len;
return 0;
}
@@ -101,16 +103,18 @@ static int mchp23k256_read(struct mtd_info *mtd, loff_t from, size_t len,
struct spi_transfer transfer[2] = {};
struct spi_message message;
unsigned char command[MAX_CMD_SIZE];
- int ret;
+ int ret, cmd_len;
spi_message_init(&message);
+ cmd_len = mchp23k256_cmdsz(flash);
+
memset(&transfer, 0, sizeof(transfer));
command[0] = MCHP23K256_CMD_READ;
mchp23k256_addr2cmd(flash, from, command);
transfer[0].tx_buf = command;
- transfer[0].len = mchp23k256_cmdsz(flash);
+ transfer[0].len = cmd_len;
spi_message_add_tail(&transfer[0], &message);
transfer[1].rx_buf = buf;
@@ -126,8 +130,8 @@ static int mchp23k256_read(struct mtd_info *mtd, loff_t from, size_t len,
if (ret)
return ret;
- if (retlen && message.actual_length > sizeof(command))
- *retlen += message.actual_length - sizeof(command);
+ if (retlen && message.actual_length > cmd_len)
+ *retlen += message.actual_length - cmd_len;
return 0;
}
--
2.23.0
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
next reply other threads:[~2019-10-30 11:38 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-30 11:39 Angelo Dureghello [this message]
2019-11-05 18:41 ` [PATCH] mtd: devices: fix mchp23k256 read and write Miquel Raynal
2019-11-05 23:17 ` Andrew Lunn
2019-11-05 23:39 ` Miquel Raynal
[not found] ` <CALJHbkDoiireW8iNqGgqRRQdQcKjiLVnxUcFBGkgzE=qsba7-A@mail.gmail.com>
2019-11-11 16:56 ` Angelo Dureghello
2019-11-12 14:19 ` Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191030113957.1625342-1-angelo.dureghello@timesys.com \
--to=angelo.dureghello@timesys.com \
--cc=linux-mtd@lists.infradead.org \
--cc=miquel.raynal@bootlin.com \
--cc=richard@nod.at \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.