From: Paul Kocialkowski <paul.kocialkowski@bootlin.com> To: dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>, David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>, James Hilliard <james.hilliard1@gmail.com>, Thomas Petazzoni <thomas.petazzoni@bootlin.com>, Paul Kocialkowski <paul.kocialkowski@bootlin.com> Subject: [PATCH 2/2] drm/gma500: Add page flip support on psb/cdv Date: Wed, 6 Nov 2019 10:44:00 +0100 [thread overview] Message-ID: <20191106094400.445834-3-paul.kocialkowski@bootlin.com> (raw) In-Reply-To: <20191106094400.445834-1-paul.kocialkowski@bootlin.com> Legacy (non-atomic) page flip support is added to the driver by using the mode_set_base CRTC function, that allows configuring a new framebuffer for display. Since the function requires the primary plane's fb to be set already, this is done prior to calling the function in the page flip helper and reverted if the flip fails. The vblank interrupt handler is also refactored to support passing an event. The PIPE_TE_STATUS bit is also considered to indicate vblank on medfield only, as explained in psb_enable_vblank. It was tested by running weston on both poulsbo and cedartrail. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> --- drivers/gpu/drm/gma500/cdv_intel_display.c | 1 + drivers/gpu/drm/gma500/gma_display.c | 46 ++++++++++++++++++++++ drivers/gpu/drm/gma500/gma_display.h | 6 +++ drivers/gpu/drm/gma500/psb_intel_display.c | 1 + drivers/gpu/drm/gma500/psb_intel_drv.h | 3 ++ drivers/gpu/drm/gma500/psb_irq.c | 18 +++++++-- 6 files changed, 72 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/gma500/cdv_intel_display.c b/drivers/gpu/drm/gma500/cdv_intel_display.c index 8b784947ed3b..7109d3d19be0 100644 --- a/drivers/gpu/drm/gma500/cdv_intel_display.c +++ b/drivers/gpu/drm/gma500/cdv_intel_display.c @@ -979,6 +979,7 @@ const struct drm_crtc_funcs cdv_intel_crtc_funcs = { .gamma_set = gma_crtc_gamma_set, .set_config = gma_crtc_set_config, .destroy = gma_crtc_destroy, + .page_flip = gma_crtc_page_flip, }; const struct gma_clock_funcs cdv_clock_funcs = { diff --git a/drivers/gpu/drm/gma500/gma_display.c b/drivers/gpu/drm/gma500/gma_display.c index bc07ae2a9a1d..17f136985d21 100644 --- a/drivers/gpu/drm/gma500/gma_display.c +++ b/drivers/gpu/drm/gma500/gma_display.c @@ -503,6 +503,52 @@ void gma_crtc_destroy(struct drm_crtc *crtc) kfree(gma_crtc); } +int gma_crtc_page_flip(struct drm_crtc *crtc, + struct drm_framebuffer *fb, + struct drm_pending_vblank_event *event, + uint32_t page_flip_flags, + struct drm_modeset_acquire_ctx *ctx) +{ + struct gma_crtc *gma_crtc = to_gma_crtc(crtc); + struct drm_framebuffer *current_fb = crtc->primary->fb; + struct drm_framebuffer *old_fb = crtc->primary->old_fb; + const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + struct drm_device *dev = crtc->dev; + unsigned long flags; + int ret; + + if (!crtc_funcs->mode_set_base) + return -EINVAL; + + /* Using mode_set_base requires the new fb to be set already. */ + crtc->primary->fb = fb; + + if (event) { + spin_lock_irqsave(&dev->event_lock, flags); + + WARN_ON(drm_crtc_vblank_get(crtc) != 0); + + gma_crtc->page_flip_event = event; + + /* Call this locked if we want an event at vblank interrupt. */ + ret = crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y, old_fb); + if (ret) { + gma_crtc->page_flip_event = NULL; + drm_crtc_vblank_put(crtc); + } + + spin_unlock_irqrestore(&dev->event_lock, flags); + } else { + ret = crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y, old_fb); + } + + /* Restore previous fb in case of failure. */ + if (ret) + crtc->primary->fb = current_fb; + + return ret; +} + int gma_crtc_set_config(struct drm_mode_set *set, struct drm_modeset_acquire_ctx *ctx) { diff --git a/drivers/gpu/drm/gma500/gma_display.h b/drivers/gpu/drm/gma500/gma_display.h index fdbd7ecaa59c..7bd6c1ee8b21 100644 --- a/drivers/gpu/drm/gma500/gma_display.h +++ b/drivers/gpu/drm/gma500/gma_display.h @@ -11,6 +11,7 @@ #define _GMA_DISPLAY_H_ #include <linux/pm_runtime.h> +#include <drm/drm_vblank.h> struct drm_encoder; struct drm_mode_set; @@ -71,6 +72,11 @@ extern void gma_crtc_prepare(struct drm_crtc *crtc); extern void gma_crtc_commit(struct drm_crtc *crtc); extern void gma_crtc_disable(struct drm_crtc *crtc); extern void gma_crtc_destroy(struct drm_crtc *crtc); +extern int gma_crtc_page_flip(struct drm_crtc *crtc, + struct drm_framebuffer *fb, + struct drm_pending_vblank_event *event, + uint32_t page_flip_flags, + struct drm_modeset_acquire_ctx *ctx); extern int gma_crtc_set_config(struct drm_mode_set *set, struct drm_modeset_acquire_ctx *ctx); diff --git a/drivers/gpu/drm/gma500/psb_intel_display.c b/drivers/gpu/drm/gma500/psb_intel_display.c index 4256410535f0..fed3b563e62e 100644 --- a/drivers/gpu/drm/gma500/psb_intel_display.c +++ b/drivers/gpu/drm/gma500/psb_intel_display.c @@ -432,6 +432,7 @@ const struct drm_crtc_funcs psb_intel_crtc_funcs = { .gamma_set = gma_crtc_gamma_set, .set_config = gma_crtc_set_config, .destroy = gma_crtc_destroy, + .page_flip = gma_crtc_page_flip, }; const struct gma_clock_funcs psb_clock_funcs = { diff --git a/drivers/gpu/drm/gma500/psb_intel_drv.h b/drivers/gpu/drm/gma500/psb_intel_drv.h index cdf10333d1c2..16c6136f778b 100644 --- a/drivers/gpu/drm/gma500/psb_intel_drv.h +++ b/drivers/gpu/drm/gma500/psb_intel_drv.h @@ -12,6 +12,7 @@ #include <drm/drm_crtc_helper.h> #include <drm/drm_encoder.h> #include <drm/drm_probe_helper.h> +#include <drm/drm_vblank.h> #include <linux/gpio.h> #include "gma_display.h" @@ -182,6 +183,8 @@ struct gma_crtc { struct psb_intel_crtc_state *crtc_state; const struct gma_clock_funcs *clock_funcs; + + struct drm_pending_vblank_event *page_flip_event; }; #define to_gma_crtc(x) \ diff --git a/drivers/gpu/drm/gma500/psb_irq.c b/drivers/gpu/drm/gma500/psb_irq.c index e6265fb85626..f787a51f6335 100644 --- a/drivers/gpu/drm/gma500/psb_irq.c +++ b/drivers/gpu/drm/gma500/psb_irq.c @@ -165,11 +165,23 @@ static void mid_pipe_event_handler(struct drm_device *dev, int pipe) "%s, can't clear status bits for pipe %d, its value = 0x%x.\n", __func__, pipe, PSB_RVDC32(pipe_stat_reg)); - if (pipe_stat_val & PIPE_VBLANK_STATUS) - drm_handle_vblank(dev, pipe); + if (pipe_stat_val & PIPE_VBLANK_STATUS || + (IS_MFLD(dev) && pipe_stat_val & PIPE_TE_STATUS)) { + struct drm_crtc *crtc = drm_crtc_from_index(dev, pipe); + struct gma_crtc *gma_crtc = to_gma_crtc(crtc); + unsigned long flags; - if (pipe_stat_val & PIPE_TE_STATUS) drm_handle_vblank(dev, pipe); + + spin_lock_irqsave(&dev->event_lock, flags); + if (gma_crtc->page_flip_event) { + drm_crtc_send_vblank_event(crtc, + gma_crtc->page_flip_event); + gma_crtc->page_flip_event = NULL; + drm_crtc_vblank_put(crtc); + } + spin_unlock_irqrestore(&dev->event_lock, flags); + } } /* -- 2.23.0
WARNING: multiple messages have this Message-ID (diff)
From: Paul Kocialkowski <paul.kocialkowski@bootlin.com> To: dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org Cc: David Airlie <airlied@linux.ie>, Paul Kocialkowski <paul.kocialkowski@bootlin.com>, James Hilliard <james.hilliard1@gmail.com>, Thomas Petazzoni <thomas.petazzoni@bootlin.com> Subject: [PATCH 2/2] drm/gma500: Add page flip support on psb/cdv Date: Wed, 6 Nov 2019 10:44:00 +0100 [thread overview] Message-ID: <20191106094400.445834-3-paul.kocialkowski@bootlin.com> (raw) Message-ID: <20191106094400.09TJAfxuPZ2oT0lanoCde2XeeQK3piBpt_8GLFQ3o5E@z> (raw) In-Reply-To: <20191106094400.445834-1-paul.kocialkowski@bootlin.com> Legacy (non-atomic) page flip support is added to the driver by using the mode_set_base CRTC function, that allows configuring a new framebuffer for display. Since the function requires the primary plane's fb to be set already, this is done prior to calling the function in the page flip helper and reverted if the flip fails. The vblank interrupt handler is also refactored to support passing an event. The PIPE_TE_STATUS bit is also considered to indicate vblank on medfield only, as explained in psb_enable_vblank. It was tested by running weston on both poulsbo and cedartrail. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> --- drivers/gpu/drm/gma500/cdv_intel_display.c | 1 + drivers/gpu/drm/gma500/gma_display.c | 46 ++++++++++++++++++++++ drivers/gpu/drm/gma500/gma_display.h | 6 +++ drivers/gpu/drm/gma500/psb_intel_display.c | 1 + drivers/gpu/drm/gma500/psb_intel_drv.h | 3 ++ drivers/gpu/drm/gma500/psb_irq.c | 18 +++++++-- 6 files changed, 72 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/gma500/cdv_intel_display.c b/drivers/gpu/drm/gma500/cdv_intel_display.c index 8b784947ed3b..7109d3d19be0 100644 --- a/drivers/gpu/drm/gma500/cdv_intel_display.c +++ b/drivers/gpu/drm/gma500/cdv_intel_display.c @@ -979,6 +979,7 @@ const struct drm_crtc_funcs cdv_intel_crtc_funcs = { .gamma_set = gma_crtc_gamma_set, .set_config = gma_crtc_set_config, .destroy = gma_crtc_destroy, + .page_flip = gma_crtc_page_flip, }; const struct gma_clock_funcs cdv_clock_funcs = { diff --git a/drivers/gpu/drm/gma500/gma_display.c b/drivers/gpu/drm/gma500/gma_display.c index bc07ae2a9a1d..17f136985d21 100644 --- a/drivers/gpu/drm/gma500/gma_display.c +++ b/drivers/gpu/drm/gma500/gma_display.c @@ -503,6 +503,52 @@ void gma_crtc_destroy(struct drm_crtc *crtc) kfree(gma_crtc); } +int gma_crtc_page_flip(struct drm_crtc *crtc, + struct drm_framebuffer *fb, + struct drm_pending_vblank_event *event, + uint32_t page_flip_flags, + struct drm_modeset_acquire_ctx *ctx) +{ + struct gma_crtc *gma_crtc = to_gma_crtc(crtc); + struct drm_framebuffer *current_fb = crtc->primary->fb; + struct drm_framebuffer *old_fb = crtc->primary->old_fb; + const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; + struct drm_device *dev = crtc->dev; + unsigned long flags; + int ret; + + if (!crtc_funcs->mode_set_base) + return -EINVAL; + + /* Using mode_set_base requires the new fb to be set already. */ + crtc->primary->fb = fb; + + if (event) { + spin_lock_irqsave(&dev->event_lock, flags); + + WARN_ON(drm_crtc_vblank_get(crtc) != 0); + + gma_crtc->page_flip_event = event; + + /* Call this locked if we want an event at vblank interrupt. */ + ret = crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y, old_fb); + if (ret) { + gma_crtc->page_flip_event = NULL; + drm_crtc_vblank_put(crtc); + } + + spin_unlock_irqrestore(&dev->event_lock, flags); + } else { + ret = crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y, old_fb); + } + + /* Restore previous fb in case of failure. */ + if (ret) + crtc->primary->fb = current_fb; + + return ret; +} + int gma_crtc_set_config(struct drm_mode_set *set, struct drm_modeset_acquire_ctx *ctx) { diff --git a/drivers/gpu/drm/gma500/gma_display.h b/drivers/gpu/drm/gma500/gma_display.h index fdbd7ecaa59c..7bd6c1ee8b21 100644 --- a/drivers/gpu/drm/gma500/gma_display.h +++ b/drivers/gpu/drm/gma500/gma_display.h @@ -11,6 +11,7 @@ #define _GMA_DISPLAY_H_ #include <linux/pm_runtime.h> +#include <drm/drm_vblank.h> struct drm_encoder; struct drm_mode_set; @@ -71,6 +72,11 @@ extern void gma_crtc_prepare(struct drm_crtc *crtc); extern void gma_crtc_commit(struct drm_crtc *crtc); extern void gma_crtc_disable(struct drm_crtc *crtc); extern void gma_crtc_destroy(struct drm_crtc *crtc); +extern int gma_crtc_page_flip(struct drm_crtc *crtc, + struct drm_framebuffer *fb, + struct drm_pending_vblank_event *event, + uint32_t page_flip_flags, + struct drm_modeset_acquire_ctx *ctx); extern int gma_crtc_set_config(struct drm_mode_set *set, struct drm_modeset_acquire_ctx *ctx); diff --git a/drivers/gpu/drm/gma500/psb_intel_display.c b/drivers/gpu/drm/gma500/psb_intel_display.c index 4256410535f0..fed3b563e62e 100644 --- a/drivers/gpu/drm/gma500/psb_intel_display.c +++ b/drivers/gpu/drm/gma500/psb_intel_display.c @@ -432,6 +432,7 @@ const struct drm_crtc_funcs psb_intel_crtc_funcs = { .gamma_set = gma_crtc_gamma_set, .set_config = gma_crtc_set_config, .destroy = gma_crtc_destroy, + .page_flip = gma_crtc_page_flip, }; const struct gma_clock_funcs psb_clock_funcs = { diff --git a/drivers/gpu/drm/gma500/psb_intel_drv.h b/drivers/gpu/drm/gma500/psb_intel_drv.h index cdf10333d1c2..16c6136f778b 100644 --- a/drivers/gpu/drm/gma500/psb_intel_drv.h +++ b/drivers/gpu/drm/gma500/psb_intel_drv.h @@ -12,6 +12,7 @@ #include <drm/drm_crtc_helper.h> #include <drm/drm_encoder.h> #include <drm/drm_probe_helper.h> +#include <drm/drm_vblank.h> #include <linux/gpio.h> #include "gma_display.h" @@ -182,6 +183,8 @@ struct gma_crtc { struct psb_intel_crtc_state *crtc_state; const struct gma_clock_funcs *clock_funcs; + + struct drm_pending_vblank_event *page_flip_event; }; #define to_gma_crtc(x) \ diff --git a/drivers/gpu/drm/gma500/psb_irq.c b/drivers/gpu/drm/gma500/psb_irq.c index e6265fb85626..f787a51f6335 100644 --- a/drivers/gpu/drm/gma500/psb_irq.c +++ b/drivers/gpu/drm/gma500/psb_irq.c @@ -165,11 +165,23 @@ static void mid_pipe_event_handler(struct drm_device *dev, int pipe) "%s, can't clear status bits for pipe %d, its value = 0x%x.\n", __func__, pipe, PSB_RVDC32(pipe_stat_reg)); - if (pipe_stat_val & PIPE_VBLANK_STATUS) - drm_handle_vblank(dev, pipe); + if (pipe_stat_val & PIPE_VBLANK_STATUS || + (IS_MFLD(dev) && pipe_stat_val & PIPE_TE_STATUS)) { + struct drm_crtc *crtc = drm_crtc_from_index(dev, pipe); + struct gma_crtc *gma_crtc = to_gma_crtc(crtc); + unsigned long flags; - if (pipe_stat_val & PIPE_TE_STATUS) drm_handle_vblank(dev, pipe); + + spin_lock_irqsave(&dev->event_lock, flags); + if (gma_crtc->page_flip_event) { + drm_crtc_send_vblank_event(crtc, + gma_crtc->page_flip_event); + gma_crtc->page_flip_event = NULL; + drm_crtc_vblank_put(crtc); + } + spin_unlock_irqrestore(&dev->event_lock, flags); + } } /* -- 2.23.0 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2019-11-06 9:44 UTC|newest] Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-11-06 9:43 [PATCH 0/2] drm/gma500: Add page flip support on psb/cdv Paul Kocialkowski 2019-11-06 9:43 ` Paul Kocialkowski 2019-11-06 9:43 ` [PATCH 1/2] drm/gma500: Add missing call to allow enabling vblank " Paul Kocialkowski 2019-11-06 9:43 ` Paul Kocialkowski 2019-11-06 15:23 ` Patrik Jakobsson 2019-11-06 15:23 ` Patrik Jakobsson 2019-11-07 14:17 ` Paul Kocialkowski 2019-11-07 14:17 ` Paul Kocialkowski 2019-11-06 9:44 ` Paul Kocialkowski [this message] 2019-11-06 9:44 ` [PATCH 2/2] drm/gma500: Add page flip support " Paul Kocialkowski 2019-11-06 15:24 ` Patrik Jakobsson 2019-11-06 15:24 ` Patrik Jakobsson 2019-11-07 8:31 ` Daniel Vetter 2019-11-07 8:31 ` Daniel Vetter 2019-11-07 9:08 ` Patrik Jakobsson 2019-11-07 9:08 ` Patrik Jakobsson 2019-11-07 9:20 ` Daniel Vetter 2019-11-07 9:20 ` Daniel Vetter 2019-11-07 9:48 ` Patrik Jakobsson 2019-11-07 9:48 ` Patrik Jakobsson
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20191106094400.445834-3-paul.kocialkowski@bootlin.com \ --to=paul.kocialkowski@bootlin.com \ --cc=airlied@linux.ie \ --cc=daniel@ffwll.ch \ --cc=dri-devel@lists.freedesktop.org \ --cc=james.hilliard1@gmail.com \ --cc=linux-kernel@vger.kernel.org \ --cc=patrik.r.jakobsson@gmail.com \ --cc=thomas.petazzoni@bootlin.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.