From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>,
netdev@vger.kernel.org, nhorman@redhat.com, sassmann@redhat.com
Subject: [net-next v2 00/14][pull request] 100GbE Intel Wired LAN Driver Updates 2019-11-06
Date: Wed, 6 Nov 2019 11:37:42 -0800 [thread overview]
Message-ID: <20191106193756.23819-1-jeffrey.t.kirsher@intel.com> (raw)
This series contains updates to ice driver only.
Jesse implements set_eeprom functionality in ethtool by adding functions
to enable reading of the NVM image.
Scott adds ethtool -m support so that we can read eeprom data on SFP/OSFP
modules.
Anirudh updates the return value to properly reflect when SRIOV is not
supported.
Md Fahad updates the driver to handle a change in the NVM, where the
boot configuration section was moved to the Preserved Field Area (PFA)
of the NVM.
Paul resolves an issue when DCBx requests non-contiguous TCs, transmit
hangs could occur, so configure a default traffic class (TC0) in these
cases to prevent traffic hangs. Adds a print statement to notify the
user when unsupported modules are inserted.
Bruce fixes up the driver unload code flow to ensure we do not clear the
interrupt scheme until the reset is complete, otherwise a hardware error
may occur.
Dave updates the DCB initialization to set is_sw_lldp boolean when the
firmware has been detected to be in an untenable state. This will
ensure that the firmware is in a known state.
Michal saves off the PCI state and I/O BARs address after PCI bus reset
so that after the reset, device registers can be read. Also adds a NULL
pointer check to prevent a potential kernel panic.
Mitch resolves an issue where VF's on PF's other than 0 were not seeing
resets by using the per-PF VF ID instead of the absolute VF ID.
Krzysztof does some code cleanup to remove a unneeded wrapper and
reduces the code complexity.
Brett reduces confusion by changing the name of ice_vc_dis_vf() to
ice_vc_reset_vf() to better describe what the function is actually
doing.
v2: dropped patch 3 "ice: Add support for FW recovery mode detection"
from the origin al series, while Ani makes changes based on
community feedback to implement devlink into the changes.
The following are changes since commit a3ead21d6eec4d18b48466c7b978566bc9cab676:
Merge tag 'wireless-drivers-next-2019-11-05' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
and are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue 100GbE
Anirudh Venkataramanan (1):
ice: Fix return value when SR-IOV is not supported
Brett Creeley (1):
ice: Rename VF function ice_vc_dis_vf to match its behavior
Bruce Allan (1):
ice: fix driver unload flow
Dave Ertman (1):
ice: Adjust DCB INIT for SW mode
Jesse Brandeburg (1):
ice: implement set_eeprom functionality
Krzysztof Kazimierczak (1):
ice: Get rid of ice_cleanup_header
Md Fahad Iqbal Polash (1):
ice: Update Boot Configuration Section read of NVM
Michal Swiatkowski (2):
ice: save PCI state in probe
ice: Check for null pointer dereference when setting rings
Mitch Williams (1):
ice: write register with correct offset
Paul Greenwalt (3):
ice: handle DCBx non-contiguous TC request
ice: print unsupported module message
ice: print PCI link speed and width
Scott W Taylor (1):
ice: add ethtool -m support for reading i2c eeprom modules
.../net/ethernet/intel/ice/ice_adminq_cmd.h | 36 ++
drivers/net/ethernet/intel/ice/ice_common.c | 112 ++++++
drivers/net/ethernet/intel/ice/ice_common.h | 11 +-
drivers/net/ethernet/intel/ice/ice_dcb.c | 6 +-
drivers/net/ethernet/intel/ice/ice_dcb_lib.c | 141 +++++--
drivers/net/ethernet/intel/ice/ice_ethtool.c | 272 ++++++++++++-
.../net/ethernet/intel/ice/ice_hw_autogen.h | 2 +
drivers/net/ethernet/intel/ice/ice_lib.c | 24 ++
drivers/net/ethernet/intel/ice/ice_lib.h | 2 +
drivers/net/ethernet/intel/ice/ice_main.c | 32 +-
drivers/net/ethernet/intel/ice/ice_nvm.c | 380 +++++++++++++-----
drivers/net/ethernet/intel/ice/ice_nvm.h | 80 ++++
drivers/net/ethernet/intel/ice/ice_txrx.c | 27 +-
drivers/net/ethernet/intel/ice/ice_type.h | 3 +
.../net/ethernet/intel/ice/ice_virtchnl_pf.c | 16 +-
15 files changed, 948 insertions(+), 196 deletions(-)
create mode 100644 drivers/net/ethernet/intel/ice/ice_nvm.h
--
2.21.0
next reply other threads:[~2019-11-06 19:37 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-06 19:37 Jeff Kirsher [this message]
2019-11-06 19:37 ` [net-next v2 01/14] ice: implement set_eeprom functionality Jeff Kirsher
2019-11-06 19:37 ` [net-next v2 02/14] ice: add ethtool -m support for reading i2c eeprom modules Jeff Kirsher
2019-11-06 19:37 ` [net-next v2 03/14] ice: Update Boot Configuration Section read of NVM Jeff Kirsher
2019-11-06 19:37 ` [net-next v2 04/14] ice: handle DCBx non-contiguous TC request Jeff Kirsher
2019-11-06 19:37 ` [net-next v2 05/14] ice: fix driver unload flow Jeff Kirsher
2019-11-06 19:37 ` [net-next v2 06/14] ice: Adjust DCB INIT for SW mode Jeff Kirsher
2019-11-06 19:37 ` [net-next v2 07/14] ice: save PCI state in probe Jeff Kirsher
2019-11-06 19:37 ` [net-next v2 08/14] ice: Check for null pointer dereference when setting rings Jeff Kirsher
2019-11-06 19:37 ` [net-next v2 09/14] ice: write register with correct offset Jeff Kirsher
2019-11-06 19:37 ` [net-next v2 10/14] ice: print unsupported module message Jeff Kirsher
2019-11-06 19:37 ` [net-next v2 11/14] ice: print PCI link speed and width Jeff Kirsher
2019-11-06 19:37 ` [net-next v2 12/14] ice: Get rid of ice_cleanup_header Jeff Kirsher
2019-11-06 19:37 ` [net-next v2 13/14] ice: Rename VF function ice_vc_dis_vf to match its behavior Jeff Kirsher
2019-11-06 19:37 ` [net-next v2 14/14] ice: Fix return value when SR-IOV is not supported Jeff Kirsher
2019-11-06 23:49 ` [net-next v2 00/14][pull request] 100GbE Intel Wired LAN Driver Updates 2019-11-06 Jeff Kirsher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191106193756.23819-1-jeffrey.t.kirsher@intel.com \
--to=jeffrey.t.kirsher@intel.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=nhorman@redhat.com \
--cc=sassmann@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.