[PATCH AUTOSEL 4.19 001/205] iio: adc: max9611: explicitly cast gain_selectors

[PATCH AUTOSEL 4.19 001/205] iio: adc: max9611: explicitly cast gain_selectors

[Sasha Levin]

From: Stefan Agner <stefan@agner.ch>

[ Upstream commit b1ec0802503820ccbc894aadfd2a44da20232f5e ]

After finding a reasonable gain, the function converts the configured
gain to a gain configuration option selector enum max9611_csa_gain.
Make the conversion clearly visible by using an explicit cast. This
also avoids a warning seen with clang:
  drivers/iio/adc/max9611.c:292:16: warning: implicit conversion from
      enumeration type 'enum max9611_conf_ids' to different enumeration
      type 'enum max9611_csa_gain' [-Wenum-conversion]
                        *csa_gain = gain_selectors[i];
                                  ~ ^~~~~~~~~~~~~~~~~

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/adc/max9611.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/iio/adc/max9611.c b/drivers/iio/adc/max9611.c
index 49c1956e6a674..0884435eec68d 100644
--- a/drivers/iio/adc/max9611.c
+++ b/drivers/iio/adc/max9611.c
@@ -289,7 +289,7 @@ static int max9611_read_csa_voltage(struct max9611_dev *max9611,
 			return ret;
 
 		if (*adc_raw > 0) {
-			*csa_gain = gain_selectors[i];
+			*csa_gain = (enum max9611_csa_gain)gain_selectors[i];
 			return 0;
 		}
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.19 002/205] tee: optee: take DT status property into account

[Sasha Levin]

From: Ard Biesheuvel <ard.biesheuvel@linaro.org>

[ Upstream commit db878f76b9ff7487da9bb0f686153f81829f1230 ]

DT nodes may have a 'status' property which, if set to anything other
than 'ok' or 'okay', indicates to the OS that the DT node should be
treated as if it was not present. So add that missing logic to the
OP-TEE driver.

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tee/optee/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
index e1aafe842d660..34dce850067b9 100644
--- a/drivers/tee/optee/core.c
+++ b/drivers/tee/optee/core.c
@@ -696,7 +696,7 @@ static int __init optee_driver_init(void)
 		return -ENODEV;
 
 	np = of_find_matching_node(fw_np, optee_match);
-	if (!np)
+	if (!np || !of_device_is_available(np))
 		return -ENODEV;
 
 	optee = optee_probe(np);
-- 
2.20.1

[PATCH AUTOSEL 4.19 003/205] ath10k: fix kernel panic by moving pci flush after napi_disable

From: Tamizh chelvam <tamizhr@codeaurora.org>

[ Upstream commit bd1d395070cca4f42a93e520b0597274789274a4 ]

When continuously running wifi up/down sequence, the napi poll
can be scheduled after the CE buffers being freed by ath10k_pci_flush

Steps:
  In a certain condition, during wifi down below scenario might occur.

ath10k_stop->ath10k_hif_stop->napi_schedule->ath10k_pci_flush->napi_poll(napi_synchronize).

In the above scenario, CE buffer entries will be freed up and become NULL in
ath10k_pci_flush. And the napi_poll has been invoked after the flush process
and it will try to get the skb from the CE buffer entry and perform some action on that.
Since the CE buffer already cleaned by pci flush this action will create NULL
pointer dereference and trigger below kernel panic.

Unable to handle kernel NULL pointer dereference at virtual address 0000005c
PC is at ath10k_pci_htt_rx_cb+0x64/0x3ec [ath10k_pci]
ath10k_pci_htt_rx_cb [ath10k_pci]
ath10k_ce_per_engine_service+0x74/0xc4 [ath10k_pci]
ath10k_ce_per_engine_service [ath10k_pci]
ath10k_ce_per_engine_service_any+0x74/0x80 [ath10k_pci]
ath10k_ce_per_engine_service_any [ath10k_pci]
ath10k_pci_napi_poll+0x48/0xec [ath10k_pci]
ath10k_pci_napi_poll [ath10k_pci]
net_rx_action+0xac/0x160
net_rx_action
__do_softirq+0xdc/0x208
__do_softirq
irq_exit+0x84/0xe0
irq_exit
__handle_domain_irq+0x80/0xa0
__handle_domain_irq
gic_handle_irq+0x38/0x5c
gic_handle_irq
__irq_usr+0x44/0x60

Tested on QCA4019 and firmware version 10.4.3.2.1.1-00010

Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/ahb.c | 4 ++--
 drivers/net/wireless/ath/ath10k/pci.c | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/ahb.c b/drivers/net/wireless/ath/ath10k/ahb.c
index c9bd0e2b5db7e..be90c9e9e5bc1 100644
--- a/drivers/net/wireless/ath/ath10k/ahb.c
+++ b/drivers/net/wireless/ath/ath10k/ahb.c
@@ -655,10 +655,10 @@ static void ath10k_ahb_hif_stop(struct ath10k *ar)
 	ath10k_ahb_irq_disable(ar);
 	synchronize_irq(ar_ahb->irq);
 
-	ath10k_pci_flush(ar);
-
 	napi_synchronize(&ar->napi);
 	napi_disable(&ar->napi);
+
+	ath10k_pci_flush(ar);
 }
 
 static int ath10k_ahb_hif_power_up(struct ath10k *ar)
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index af2cf55c4c1e6..97fa5c74f2fe7 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -2068,9 +2068,9 @@ static void ath10k_pci_hif_stop(struct ath10k *ar)
 
 	ath10k_pci_irq_disable(ar);
 	ath10k_pci_irq_sync(ar);
-	ath10k_pci_flush(ar);
 	napi_synchronize(&ar->napi);
 	napi_disable(&ar->napi);
+	ath10k_pci_flush(ar);
 
 	spin_lock_irqsave(&ar_pci->ps_lock, flags);
 	WARN_ON(ar_pci->ps_wake_refcount > 0);
-- 
2.20.1

[PATCH AUTOSEL 4.19 003/205] ath10k: fix kernel panic by moving pci flush after napi_disable

[Sasha Levin]

From: Tamizh chelvam <tamizhr@codeaurora.org>

[ Upstream commit bd1d395070cca4f42a93e520b0597274789274a4 ]

When continuously running wifi up/down sequence, the napi poll
can be scheduled after the CE buffers being freed by ath10k_pci_flush

Steps:
  In a certain condition, during wifi down below scenario might occur.

ath10k_stop->ath10k_hif_stop->napi_schedule->ath10k_pci_flush->napi_poll(napi_synchronize).

In the above scenario, CE buffer entries will be freed up and become NULL in
ath10k_pci_flush. And the napi_poll has been invoked after the flush process
and it will try to get the skb from the CE buffer entry and perform some action on that.
Since the CE buffer already cleaned by pci flush this action will create NULL
pointer dereference and trigger below kernel panic.

Unable to handle kernel NULL pointer dereference at virtual address 0000005c
PC is at ath10k_pci_htt_rx_cb+0x64/0x3ec [ath10k_pci]
ath10k_pci_htt_rx_cb [ath10k_pci]
ath10k_ce_per_engine_service+0x74/0xc4 [ath10k_pci]
ath10k_ce_per_engine_service [ath10k_pci]
ath10k_ce_per_engine_service_any+0x74/0x80 [ath10k_pci]
ath10k_ce_per_engine_service_any [ath10k_pci]
ath10k_pci_napi_poll+0x48/0xec [ath10k_pci]
ath10k_pci_napi_poll [ath10k_pci]
net_rx_action+0xac/0x160
net_rx_action
__do_softirq+0xdc/0x208
__do_softirq
irq_exit+0x84/0xe0
irq_exit
__handle_domain_irq+0x80/0xa0
__handle_domain_irq
gic_handle_irq+0x38/0x5c
gic_handle_irq
__irq_usr+0x44/0x60

Tested on QCA4019 and firmware version 10.4.3.2.1.1-00010

Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/ahb.c | 4 ++--
 drivers/net/wireless/ath/ath10k/pci.c | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/ahb.c b/drivers/net/wireless/ath/ath10k/ahb.c
index c9bd0e2b5db7e..be90c9e9e5bc1 100644
--- a/drivers/net/wireless/ath/ath10k/ahb.c
+++ b/drivers/net/wireless/ath/ath10k/ahb.c
@@ -655,10 +655,10 @@ static void ath10k_ahb_hif_stop(struct ath10k *ar)
 	ath10k_ahb_irq_disable(ar);
 	synchronize_irq(ar_ahb->irq);
 
-	ath10k_pci_flush(ar);
-
 	napi_synchronize(&ar->napi);
 	napi_disable(&ar->napi);
+
+	ath10k_pci_flush(ar);
 }
 
 static int ath10k_ahb_hif_power_up(struct ath10k *ar)
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index af2cf55c4c1e6..97fa5c74f2fe7 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -2068,9 +2068,9 @@ static void ath10k_pci_hif_stop(struct ath10k *ar)
 
 	ath10k_pci_irq_disable(ar);
 	ath10k_pci_irq_sync(ar);
-	ath10k_pci_flush(ar);
 	napi_synchronize(&ar->napi);
 	napi_disable(&ar->napi);
+	ath10k_pci_flush(ar);
 
 	spin_lock_irqsave(&ar_pci->ps_lock, flags);
 	WARN_ON(ar_pci->ps_wake_refcount > 0);
-- 
2.20.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH AUTOSEL 4.19 004/205] iio: dac: mcp4922: fix error handling in mcp4922_write_raw

[Sasha Levin]

From: Marcus Folkesson <marcus.folkesson@gmail.com>

[ Upstream commit 0833627fc3f757a0dca11e2a9c46c96335a900ee ]

Do not try to write negative values and make sure that the write goes well.

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/dac/mcp4922.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/iio/dac/mcp4922.c b/drivers/iio/dac/mcp4922.c
index bf9aa3fc0534e..b5190d1dae8e3 100644
--- a/drivers/iio/dac/mcp4922.c
+++ b/drivers/iio/dac/mcp4922.c
@@ -94,17 +94,22 @@ static int mcp4922_write_raw(struct iio_dev *indio_dev,
 		long mask)
 {
 	struct mcp4922_state *state = iio_priv(indio_dev);
+	int ret;
 
 	if (val2 != 0)
 		return -EINVAL;
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
-		if (val > GENMASK(chan->scan_type.realbits-1, 0))
+		if (val < 0 || val > GENMASK(chan->scan_type.realbits - 1, 0))
 			return -EINVAL;
 		val <<= chan->scan_type.shift;
-		state->value[chan->channel] = val;
-		return mcp4922_spi_write(state, chan->channel, val);
+
+		ret = mcp4922_spi_write(state, chan->channel, val);
+		if (!ret)
+			state->value[chan->channel] = val;
+		return ret;
+
 	default:
 		return -EINVAL;
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.19 005/205] clk: sunxi-ng: h6: fix PWM gate/reset offset

[Sasha Levin]

From: Rongyi Chen <chenyi@tt-cool.com>

[ Upstream commit 58c0f79887d5e425fe6a9fd542778e50df69e9c6 ]

Currently the register offset of the PWM bus gate in Allwinner H6 clock
driver is wrong.

Fix this issue.

Fixes: 542353ea ("clk: sunxi-ng: add support for the Allwinner H6 CCU")
Signed-off-by: Rongyi Chen <chenyi@tt-cool.com>
[Icenowy: refactor commit message]
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/sunxi-ng/ccu-sun50i-h6.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
index 0f7a0ffd3f706..d425b47cef179 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h6.c
@@ -352,7 +352,7 @@ static SUNXI_CCU_GATE(bus_dbg_clk, "bus-dbg", "psi-ahb1-ahb2",
 static SUNXI_CCU_GATE(bus_psi_clk, "bus-psi", "psi-ahb1-ahb2",
 		      0x79c, BIT(0), 0);
 
-static SUNXI_CCU_GATE(bus_pwm_clk, "bus-pwm", "apb1", 0x79c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_pwm_clk, "bus-pwm", "apb1", 0x7ac, BIT(0), 0);
 
 static SUNXI_CCU_GATE(bus_iommu_clk, "bus-iommu", "apb1", 0x7bc, BIT(0), 0);
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 006/205] soundwire: Initialize completion for defer messages

[Sasha Levin]

From: Shreyas NC <shreyas.nc@intel.com>

[ Upstream commit a306a0e4a5326269b6c78d136407f08433ab5ece ]

Deferred messages are async messages used to synchronize
transitions mostly while doing a bank switch on multi links.
On successful transitions these messages are marked complete
and thereby confirming that all the buses performed bank switch
successfully.

So, initialize the completion structure for the same.

Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com>
Signed-off-by: Shreyas NC <shreyas.nc@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soundwire/bus.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c
index dcc0ff9f0c224..dbabd5e69343f 100644
--- a/drivers/soundwire/bus.c
+++ b/drivers/soundwire/bus.c
@@ -175,6 +175,7 @@ static inline int do_transfer_defer(struct sdw_bus *bus,
 
 	defer->msg = msg;
 	defer->length = msg->len;
+	init_completion(&defer->complete);
 
 	for (i = 0; i <= retry; i++) {
 		resp = bus->ops->xfer_msg_defer(bus, msg, defer);
-- 
2.20.1

[PATCH AUTOSEL 4.19 007/205] soundwire: intel: Fix uninitialized adev deref

[Sasha Levin]

From: Vinod Koul <vkoul@kernel.org>

[ Upstream commit e1c815f4b24a305e5bc9eceb541674bf4d02b709 ]

In case of error, we can dereference uninitialized 'adev'

drivers/soundwire/intel_init.c:154 sdw_intel_acpi_cb()
error: uninitialized symbol 'adev'.

Fix that by not using adev for warn print and make it pr_err.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soundwire/intel_init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/soundwire/intel_init.c b/drivers/soundwire/intel_init.c
index d1ea6b4d0ad30..5c8a20d998786 100644
--- a/drivers/soundwire/intel_init.c
+++ b/drivers/soundwire/intel_init.c
@@ -151,7 +151,7 @@ static acpi_status sdw_intel_acpi_cb(acpi_handle handle, u32 level,
 	struct acpi_device *adev;
 
 	if (acpi_bus_get_device(handle, &adev)) {
-		dev_err(&adev->dev, "Couldn't find ACPI handle\n");
+		pr_err("%s: Couldn't find ACPI handle\n", __func__);
 		return AE_NOT_FOUND;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 008/205] arm64: dts: allwinner: a64: Orange Pi Win: Fix SD card node

[Sasha Levin]

From: Samuel Holland <samuel@sholland.org>

[ Upstream commit 09b964afca14d0594b2b2f265df3d987e2f43867 ]

The Orange Pi Win has a microSD card slot which is connected via all
four SD data lines. As the DT was not mentioning this fact, we got the
default single bit transfers, losing out on performance.
Also, as microSD does not have a write protect switch, we disable this
feature in the DT node.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
index 1221764f5719c..667016815cf32 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
@@ -67,7 +67,9 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&reg_dcdc1>;
-	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	disable-wp;
+	bus-width = <4>;
 	status = "okay";
 };
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 009/205] arm64: dts: allwinner: a64: Olinuxino: fix DRAM voltage

[Sasha Levin]

From: Andre Przywara <andre.przywara@arm.com>

[ Upstream commit 93366b49a35f3a190052734b3f32c8fe2535b53f ]

The Olinuxino board uses DDR3L chips which are supposed to be driven
with 1.35V. The reset default of the AXP is properly set to 1.36V.

While technically the chips can also run at 1.5 volts, changing the
voltage on the fly while booting Linux is asking for trouble. Also
running at a lower voltage saves power.

So fix the DCDC5 value to match the actual board design.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Martin Lucina <martin@lucina.net>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
index 3f531393eaee9..b3f186434f363 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-olinuxino.dts
@@ -142,10 +142,14 @@
 
 /* DCDC3 is polyphased with DCDC2 */
 
+/*
+ * The board uses DDR3L DRAM chips. 1.36V is the closest to the nominal
+ * 1.35V that the PMIC can drive.
+ */
 &reg_dcdc5 {
 	regulator-always-on;
-	regulator-min-microvolt = <1500000>;
-	regulator-max-microvolt = <1500000>;
+	regulator-min-microvolt = <1360000>;
+	regulator-max-microvolt = <1360000>;
 	regulator-name = "vcc-ddr3";
 };
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 010/205] arm64: dts: allwinner: a64: NanoPi-A64: Fix DCDC1 voltage

[Sasha Levin]

From: Andre Przywara <andre.przywara@arm.com>

[ Upstream commit 480f58cdbe392d4387a2193b6131a277e0111dd0 ]

According to the NanoPi-A64 schematics, DCDC1 is connected to a voltage
rail named "VDD_SYS_3.3V". All users seem to expect 3.3V here: the
Ethernet PHY, the uSD card slot, the camera interface and the GPIO pins
on the headers.
Fix up the voltage on the regulator to lift it up to 3.3V.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
index 98dbff19f5ccc..5caba225b4f78 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts
@@ -125,9 +125,9 @@
 
 &reg_dcdc1 {
 	regulator-always-on;
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
-	regulator-name = "vcc-3v";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-3v3";
 };
 
 &reg_dcdc2 {
-- 
2.20.1

[PATCH AUTOSEL 4.19 011/205] ALSA: pcm: signedness bug in snd_pcm_plug_alloc()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 6f128fa41f310e1f39ebcea9621d2905549ecf52 ]

The "frames" variable is unsigned so the error handling doesn't work
properly.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/core/oss/pcm_plugin.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/core/oss/pcm_plugin.c b/sound/core/oss/pcm_plugin.c
index 71571d9921598..31cb2acf8afcc 100644
--- a/sound/core/oss/pcm_plugin.c
+++ b/sound/core/oss/pcm_plugin.c
@@ -111,7 +111,7 @@ int snd_pcm_plug_alloc(struct snd_pcm_substream *plug, snd_pcm_uframes_t frames)
 		while (plugin->next) {
 			if (plugin->dst_frames)
 				frames = plugin->dst_frames(plugin, frames);
-			if (snd_BUG_ON(frames <= 0))
+			if (snd_BUG_ON((snd_pcm_sframes_t)frames <= 0))
 				return -ENXIO;
 			plugin = plugin->next;
 			err = snd_pcm_plugin_alloc(plugin, frames);
@@ -123,7 +123,7 @@ int snd_pcm_plug_alloc(struct snd_pcm_substream *plug, snd_pcm_uframes_t frames)
 		while (plugin->prev) {
 			if (plugin->src_frames)
 				frames = plugin->src_frames(plugin, frames);
-			if (snd_BUG_ON(frames <= 0))
+			if (snd_BUG_ON((snd_pcm_sframes_t)frames <= 0))
 				return -ENXIO;
 			plugin = plugin->prev;
 			err = snd_pcm_plugin_alloc(plugin, frames);
-- 
2.20.1

[PATCH AUTOSEL 4.19 012/205] soc/tegra: pmc: Fix pad voltage configuration for Tegra186

[Sasha Levin]

From: Aapo Vienamo <avienamo@nvidia.com>

[ Upstream commit 13136a47a061c01c91df78b37f7708dd5ce7035f ]

Implement support for the PMC_IMPL_E_33V_PWR register which replaces
PMC_PWR_DET register interface of the SoC generations preceding
Tegra186. Also add the voltage bit offsets to the tegra186_io_pads[]
table and the AO_HV pad.

Signed-off-by: Aapo Vienamo <avienamo@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/tegra/pmc.c | 55 +++++++++++++++++++++++++++++------------
 include/soc/tegra/pmc.h |  1 +
 2 files changed, 40 insertions(+), 16 deletions(-)

diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c
index 4b452f36f0547..f17a678154047 100644
--- a/drivers/soc/tegra/pmc.c
+++ b/drivers/soc/tegra/pmc.c
@@ -65,6 +65,8 @@
 
 #define PWRGATE_STATUS			0x38
 
+#define PMC_IMPL_E_33V_PWR		0x40
+
 #define PMC_PWR_DET			0x48
 
 #define PMC_SCRATCH0_MODE_RECOVERY	BIT(31)
@@ -154,6 +156,7 @@ struct tegra_pmc_soc {
 	bool has_tsense_reset;
 	bool has_gpu_clamps;
 	bool needs_mbist_war;
+	bool has_impl_33v_pwr;
 
 	const struct tegra_io_pad_soc *io_pads;
 	unsigned int num_io_pads;
@@ -1067,20 +1070,31 @@ int tegra_io_pad_set_voltage(enum tegra_io_pad id,
 
 	mutex_lock(&pmc->powergates_lock);
 
-	/* write-enable PMC_PWR_DET_VALUE[pad->voltage] */
-	value = tegra_pmc_readl(PMC_PWR_DET);
-	value |= BIT(pad->voltage);
-	tegra_pmc_writel(value, PMC_PWR_DET);
+	if (pmc->soc->has_impl_33v_pwr) {
+		value = tegra_pmc_readl(PMC_IMPL_E_33V_PWR);
 
-	/* update I/O voltage */
-	value = tegra_pmc_readl(PMC_PWR_DET_VALUE);
+		if (voltage == TEGRA_IO_PAD_1800000UV)
+			value &= ~BIT(pad->voltage);
+		else
+			value |= BIT(pad->voltage);
 
-	if (voltage == TEGRA_IO_PAD_1800000UV)
-		value &= ~BIT(pad->voltage);
-	else
+		tegra_pmc_writel(value, PMC_IMPL_E_33V_PWR);
+	} else {
+		/* write-enable PMC_PWR_DET_VALUE[pad->voltage] */
+		value = tegra_pmc_readl(PMC_PWR_DET);
 		value |= BIT(pad->voltage);
+		tegra_pmc_writel(value, PMC_PWR_DET);
+
+		/* update I/O voltage */
+		value = tegra_pmc_readl(PMC_PWR_DET_VALUE);
 
-	tegra_pmc_writel(value, PMC_PWR_DET_VALUE);
+		if (voltage == TEGRA_IO_PAD_1800000UV)
+			value &= ~BIT(pad->voltage);
+		else
+			value |= BIT(pad->voltage);
+
+		tegra_pmc_writel(value, PMC_PWR_DET_VALUE);
+	}
 
 	mutex_unlock(&pmc->powergates_lock);
 
@@ -1102,7 +1116,10 @@ int tegra_io_pad_get_voltage(enum tegra_io_pad id)
 	if (pad->voltage == UINT_MAX)
 		return -ENOTSUPP;
 
-	value = tegra_pmc_readl(PMC_PWR_DET_VALUE);
+	if (pmc->soc->has_impl_33v_pwr)
+		value = tegra_pmc_readl(PMC_IMPL_E_33V_PWR);
+	else
+		value = tegra_pmc_readl(PMC_PWR_DET_VALUE);
 
 	if ((value & BIT(pad->voltage)) == 0)
 		return TEGRA_IO_PAD_1800000UV;
@@ -1561,6 +1578,7 @@ static const struct tegra_pmc_soc tegra30_pmc_soc = {
 	.cpu_powergates = tegra30_cpu_powergates,
 	.has_tsense_reset = true,
 	.has_gpu_clamps = false,
+	.has_impl_33v_pwr = false,
 	.num_io_pads = 0,
 	.io_pads = NULL,
 	.regs = &tegra20_pmc_regs,
@@ -1603,6 +1621,7 @@ static const struct tegra_pmc_soc tegra114_pmc_soc = {
 	.cpu_powergates = tegra114_cpu_powergates,
 	.has_tsense_reset = true,
 	.has_gpu_clamps = false,
+	.has_impl_33v_pwr = false,
 	.num_io_pads = 0,
 	.io_pads = NULL,
 	.regs = &tegra20_pmc_regs,
@@ -1683,6 +1702,7 @@ static const struct tegra_pmc_soc tegra124_pmc_soc = {
 	.cpu_powergates = tegra124_cpu_powergates,
 	.has_tsense_reset = true,
 	.has_gpu_clamps = true,
+	.has_impl_33v_pwr = false,
 	.num_io_pads = ARRAY_SIZE(tegra124_io_pads),
 	.io_pads = tegra124_io_pads,
 	.regs = &tegra20_pmc_regs,
@@ -1772,6 +1792,7 @@ static const struct tegra_pmc_soc tegra210_pmc_soc = {
 	.cpu_powergates = tegra210_cpu_powergates,
 	.has_tsense_reset = true,
 	.has_gpu_clamps = true,
+	.has_impl_33v_pwr = false,
 	.needs_mbist_war = true,
 	.num_io_pads = ARRAY_SIZE(tegra210_io_pads),
 	.io_pads = tegra210_io_pads,
@@ -1800,7 +1821,7 @@ static const struct tegra_io_pad_soc tegra186_io_pads[] = {
 	{ .id = TEGRA_IO_PAD_HDMI_DP0, .dpd = 28, .voltage = UINT_MAX },
 	{ .id = TEGRA_IO_PAD_HDMI_DP1, .dpd = 29, .voltage = UINT_MAX },
 	{ .id = TEGRA_IO_PAD_PEX_CNTRL, .dpd = 32, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_SDMMC2_HV, .dpd = 34, .voltage = UINT_MAX },
+	{ .id = TEGRA_IO_PAD_SDMMC2_HV, .dpd = 34, .voltage = 5 },
 	{ .id = TEGRA_IO_PAD_SDMMC4, .dpd = 36, .voltage = UINT_MAX },
 	{ .id = TEGRA_IO_PAD_CAM, .dpd = 38, .voltage = UINT_MAX },
 	{ .id = TEGRA_IO_PAD_DSIB, .dpd = 40, .voltage = UINT_MAX },
@@ -1812,12 +1833,13 @@ static const struct tegra_io_pad_soc tegra186_io_pads[] = {
 	{ .id = TEGRA_IO_PAD_CSIF, .dpd = 46, .voltage = UINT_MAX },
 	{ .id = TEGRA_IO_PAD_SPI, .dpd = 47, .voltage = UINT_MAX },
 	{ .id = TEGRA_IO_PAD_UFS, .dpd = 49, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_DMIC_HV, .dpd = 52, .voltage = UINT_MAX },
+	{ .id = TEGRA_IO_PAD_DMIC_HV, .dpd = 52, .voltage = 2 },
 	{ .id = TEGRA_IO_PAD_EDP, .dpd = 53, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_SDMMC1_HV, .dpd = 55, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_SDMMC3_HV, .dpd = 56, .voltage = UINT_MAX },
+	{ .id = TEGRA_IO_PAD_SDMMC1_HV, .dpd = 55, .voltage = 4 },
+	{ .id = TEGRA_IO_PAD_SDMMC3_HV, .dpd = 56, .voltage = 6 },
 	{ .id = TEGRA_IO_PAD_CONN, .dpd = 60, .voltage = UINT_MAX },
-	{ .id = TEGRA_IO_PAD_AUDIO_HV, .dpd = 61, .voltage = UINT_MAX },
+	{ .id = TEGRA_IO_PAD_AUDIO_HV, .dpd = 61, .voltage = 1 },
+	{ .id = TEGRA_IO_PAD_AO_HV, .dpd = UINT_MAX, .voltage = 0 },
 };
 
 static const struct tegra_pmc_regs tegra186_pmc_regs = {
@@ -1870,6 +1892,7 @@ static const struct tegra_pmc_soc tegra186_pmc_soc = {
 	.cpu_powergates = NULL,
 	.has_tsense_reset = false,
 	.has_gpu_clamps = false,
+	.has_impl_33v_pwr = true,
 	.num_io_pads = ARRAY_SIZE(tegra186_io_pads),
 	.io_pads = tegra186_io_pads,
 	.regs = &tegra186_pmc_regs,
diff --git a/include/soc/tegra/pmc.h b/include/soc/tegra/pmc.h
index c32bf91c23e6f..445aa66514e90 100644
--- a/include/soc/tegra/pmc.h
+++ b/include/soc/tegra/pmc.h
@@ -134,6 +134,7 @@ enum tegra_io_pad {
 	TEGRA_IO_PAD_USB2,
 	TEGRA_IO_PAD_USB3,
 	TEGRA_IO_PAD_USB_BIAS,
+	TEGRA_IO_PAD_AO_HV,
 };
 
 /* deprecated, use TEGRA_IO_PAD_{HDMI,LVDS} instead */
-- 
2.20.1

[PATCH AUTOSEL 4.19 013/205] arm64: dts: tegra210-p2180: Correct sdmmc4 vqmmc-supply

[Sasha Levin]

From: Aapo Vienamo <avienamo@nvidia.com>

[ Upstream commit 6ff7705da8806de45ca1490194f0b4eb07725804 ]

On p2180 sdmmc4 is powered from a fixed 1.8 V regulator.

Signed-off-by: Aapo Vienamo <avienamo@nvidia.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
index 7398ae8856dc0..ccaa555180dc0 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi
@@ -282,6 +282,7 @@
 		status = "okay";
 		bus-width = <8>;
 		non-removable;
+		vqmmc-supply = <&vdd_1v8>;
 	};
 
 	clocks {
-- 
2.20.1

[PATCH AUTOSEL 4.19 014/205] y2038: make do_gettimeofday() and get_seconds() inline

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 33e26418193f58d1895f2f968e1953b1caf8deb7 ]

get_seconds() and do_gettimeofday() are only used by a few modules now any
more (waiting for the respective patches to get accepted), and they are
among the last holdouts of code that is not y2038 safe in the core kernel.

Move the implementation into the timekeeping32.h header to clean up
the core kernel and isolate the old interfaces further.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/timekeeping32.h | 15 +++++++++++++--
 kernel/time/time.c            | 15 +++++++++------
 kernel/time/timekeeping.c     | 24 ------------------------
 3 files changed, 22 insertions(+), 32 deletions(-)

diff --git a/include/linux/timekeeping32.h b/include/linux/timekeeping32.h
index 8762c2f45f8bf..479da36be8c82 100644
--- a/include/linux/timekeeping32.h
+++ b/include/linux/timekeeping32.h
@@ -6,8 +6,19 @@
  * over time so we can remove the file here.
  */
 
-extern void do_gettimeofday(struct timeval *tv);
-unsigned long get_seconds(void);
+static inline void do_gettimeofday(struct timeval *tv)
+{
+	struct timespec64 now;
+
+	ktime_get_real_ts64(&now);
+	tv->tv_sec = now.tv_sec;
+	tv->tv_usec = now.tv_nsec/1000;
+}
+
+static inline unsigned long get_seconds(void)
+{
+	return ktime_get_real_seconds();
+}
 
 static inline struct timespec current_kernel_time(void)
 {
diff --git a/kernel/time/time.c b/kernel/time/time.c
index be057d6579f13..f7d4fa5ddb9e2 100644
--- a/kernel/time/time.c
+++ b/kernel/time/time.c
@@ -144,9 +144,11 @@ SYSCALL_DEFINE2(gettimeofday, struct timeval __user *, tv,
 		struct timezone __user *, tz)
 {
 	if (likely(tv != NULL)) {
-		struct timeval ktv;
-		do_gettimeofday(&ktv);
-		if (copy_to_user(tv, &ktv, sizeof(ktv)))
+		struct timespec64 ts;
+
+		ktime_get_real_ts64(&ts);
+		if (put_user(ts.tv_sec, &tv->tv_sec) ||
+		    put_user(ts.tv_nsec / 1000, &tv->tv_usec))
 			return -EFAULT;
 	}
 	if (unlikely(tz != NULL)) {
@@ -227,10 +229,11 @@ COMPAT_SYSCALL_DEFINE2(gettimeofday, struct compat_timeval __user *, tv,
 		       struct timezone __user *, tz)
 {
 	if (tv) {
-		struct timeval ktv;
+		struct timespec64 ts;
 
-		do_gettimeofday(&ktv);
-		if (compat_put_timeval(&ktv, tv))
+		ktime_get_real_ts64(&ts);
+		if (put_user(ts.tv_sec, &tv->tv_sec) ||
+		    put_user(ts.tv_nsec / 1000, &tv->tv_usec))
 			return -EFAULT;
 	}
 	if (tz) {
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index c2708e1f0c69f..81ee5b83c9200 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -1214,22 +1214,6 @@ int get_device_system_crosststamp(int (*get_time_fn)
 }
 EXPORT_SYMBOL_GPL(get_device_system_crosststamp);
 
-/**
- * do_gettimeofday - Returns the time of day in a timeval
- * @tv:		pointer to the timeval to be set
- *
- * NOTE: Users should be converted to using getnstimeofday()
- */
-void do_gettimeofday(struct timeval *tv)
-{
-	struct timespec64 now;
-
-	getnstimeofday64(&now);
-	tv->tv_sec = now.tv_sec;
-	tv->tv_usec = now.tv_nsec/1000;
-}
-EXPORT_SYMBOL(do_gettimeofday);
-
 /**
  * do_settimeofday64 - Sets the time of day.
  * @ts:     pointer to the timespec64 variable containing the new time
@@ -2177,14 +2161,6 @@ void getboottime64(struct timespec64 *ts)
 }
 EXPORT_SYMBOL_GPL(getboottime64);
 
-unsigned long get_seconds(void)
-{
-	struct timekeeper *tk = &tk_core.timekeeper;
-
-	return tk->xtime_sec;
-}
-EXPORT_SYMBOL(get_seconds);
-
 void ktime_get_coarse_real_ts64(struct timespec64 *ts)
 {
 	struct timekeeper *tk = &tk_core.timekeeper;
-- 
2.20.1

[PATCH AUTOSEL 4.19 015/205] ARM: dts: rcar: Correct SATA device sizes to 2 MiB

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 441f61e3aa9e7386731ce1405044d484bd81f911 ]

Update the SATA device nodes on R-Car H1, H2, and M2-W to use a 2 MiB
I/O space, as specified in Rev.1.0 of the R-Car H1 and R-Car Gen2
hardware user manuals.

See also commit e9f0089b2d8a3d45 ("arm64: dts: r8a7795: Correct SATA
device size to 2MiB").

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/r8a7779.dtsi | 2 +-
 arch/arm/boot/dts/r8a7790.dtsi | 4 ++--
 arch/arm/boot/dts/r8a7791.dtsi | 4 ++--
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 6b997bc016ee8..03919714645ae 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -344,7 +344,7 @@
 
 	sata: sata@fc600000 {
 		compatible = "renesas,sata-r8a7779", "renesas,rcar-sata";
-		reg = <0xfc600000 0x2000>;
+		reg = <0xfc600000 0x200000>;
 		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7779_CLK_SATA>;
 		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 0925bdca438fe..52a757f47bf08 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -1559,7 +1559,7 @@
 		sata0: sata@ee300000 {
 			compatible = "renesas,sata-r8a7790",
 				     "renesas,rcar-gen2-sata";
-			reg = <0 0xee300000 0 0x2000>;
+			reg = <0 0xee300000 0 0x200000>;
 			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 815>;
 			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
@@ -1570,7 +1570,7 @@
 		sata1: sata@ee500000 {
 			compatible = "renesas,sata-r8a7790",
 				     "renesas,rcar-gen2-sata";
-			reg = <0 0xee500000 0 0x2000>;
+			reg = <0 0xee500000 0 0x200000>;
 			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 814>;
 			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 991ac6feedd5b..25b6a99dd87a2 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1543,7 +1543,7 @@
 		sata0: sata@ee300000 {
 			compatible = "renesas,sata-r8a7791",
 				     "renesas,rcar-gen2-sata";
-			reg = <0 0xee300000 0 0x2000>;
+			reg = <0 0xee300000 0 0x200000>;
 			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 815>;
 			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
@@ -1554,7 +1554,7 @@
 		sata1: sata@ee500000 {
 			compatible = "renesas,sata-r8a7791",
 				     "renesas,rcar-gen2-sata";
-			reg = <0 0xee500000 0 0x2000>;
+			reg = <0 0xee500000 0 0x200000>;
 			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 814>;
 			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 015/205] ARM: dts: rcar: Correct SATA device sizes to 2 MiB

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 441f61e3aa9e7386731ce1405044d484bd81f911 ]

Update the SATA device nodes on R-Car H1, H2, and M2-W to use a 2 MiB
I/O space, as specified in Rev.1.0 of the R-Car H1 and R-Car Gen2
hardware user manuals.

See also commit e9f0089b2d8a3d45 ("arm64: dts: r8a7795: Correct SATA
device size to 2MiB").

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/r8a7779.dtsi | 2 +-
 arch/arm/boot/dts/r8a7790.dtsi | 4 ++--
 arch/arm/boot/dts/r8a7791.dtsi | 4 ++--
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 6b997bc016ee8..03919714645ae 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -344,7 +344,7 @@
 
 	sata: sata@fc600000 {
 		compatible = "renesas,sata-r8a7779", "renesas,rcar-sata";
-		reg = <0xfc600000 0x2000>;
+		reg = <0xfc600000 0x200000>;
 		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7779_CLK_SATA>;
 		power-domains = <&sysc R8A7779_PD_ALWAYS_ON>;
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 0925bdca438fe..52a757f47bf08 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -1559,7 +1559,7 @@
 		sata0: sata@ee300000 {
 			compatible = "renesas,sata-r8a7790",
 				     "renesas,rcar-gen2-sata";
-			reg = <0 0xee300000 0 0x2000>;
+			reg = <0 0xee300000 0 0x200000>;
 			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 815>;
 			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
@@ -1570,7 +1570,7 @@
 		sata1: sata@ee500000 {
 			compatible = "renesas,sata-r8a7790",
 				     "renesas,rcar-gen2-sata";
-			reg = <0 0xee500000 0 0x2000>;
+			reg = <0 0xee500000 0 0x200000>;
 			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 814>;
 			power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 991ac6feedd5b..25b6a99dd87a2 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1543,7 +1543,7 @@
 		sata0: sata@ee300000 {
 			compatible = "renesas,sata-r8a7791",
 				     "renesas,rcar-gen2-sata";
-			reg = <0 0xee300000 0 0x2000>;
+			reg = <0 0xee300000 0 0x200000>;
 			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 815>;
 			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
@@ -1554,7 +1554,7 @@
 		sata1: sata@ee500000 {
 			compatible = "renesas,sata-r8a7791",
 				     "renesas,rcar-gen2-sata";
-			reg = <0 0xee500000 0 0x2000>;
+			reg = <0 0xee500000 0 0x200000>;
 			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 814>;
 			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 016/205] ARM: dts: at91/trivial: Fix USART1 definition for at91sam9g45

[Sasha Levin]

From: Jay Foster <jayfoster@ieee.org>

[ Upstream commit 10af10db8c76fa5b9bf1f52a895c1cb2c0ac24da ]

Fix a typo. No functional change made by this patch.

Signed-off-by: Jay Foster <jayfoster@ieee.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/at91sam9g45.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 1ee25a475be87..d16db1fa7e15c 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -570,7 +570,7 @@
 					};
 				};
 
-				uart1 {
+				usart1 {
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
 							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE
-- 
2.20.1

[PATCH AUTOSEL 4.19 017/205] rtc: sysfs: fix NULL check in rtc_add_groups()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 777d8ae56da18fb6440acd941edb3597c1b02bf0 ]

devm_kcalloc() returns NULL, it never returns error pointers.  In the
current code we would return PTR_ERR(NULL) which is success, instead of
returning the -ENOMEM error code.

Fixes: a0a1a1ba3032 ("rtc: sysfs: facilitate attribute add to rtc device")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-sysfs.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/rtc/rtc-sysfs.c b/drivers/rtc/rtc-sysfs.c
index f1ff30ade5343..9746c32eee2eb 100644
--- a/drivers/rtc/rtc-sysfs.c
+++ b/drivers/rtc/rtc-sysfs.c
@@ -338,8 +338,8 @@ int rtc_add_groups(struct rtc_device *rtc, const struct attribute_group **grps)
 
 	new_cnt = old_cnt + add_cnt + 1;
 	groups = devm_kcalloc(&rtc->dev, new_cnt, sizeof(*groups), GFP_KERNEL);
-	if (IS_ERR_OR_NULL(groups))
-		return PTR_ERR(groups);
+	if (!groups)
+		return -ENOMEM;
 	memcpy(groups, rtc->dev.groups, old_cnt * sizeof(*groups));
 	memcpy(groups + old_cnt, grps, add_cnt * sizeof(*groups));
 	groups[old_cnt + add_cnt] = NULL;
-- 
2.20.1

[PATCH AUTOSEL 4.19 018/205] rtc: rv8803: fix the rv8803 id in the OF table

[Sasha Levin]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

[ Upstream commit c856618d20662695fcdb47bf4d560dc457662aec ]

The ID for RV8803 must be rv_8803

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-rv8803.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-rv8803.c b/drivers/rtc/rtc-rv8803.c
index 29fc3d2103923..17ccef5d5db1a 100644
--- a/drivers/rtc/rtc-rv8803.c
+++ b/drivers/rtc/rtc-rv8803.c
@@ -623,7 +623,7 @@ MODULE_DEVICE_TABLE(i2c, rv8803_id);
 static const struct of_device_id rv8803_of_match[] = {
 	{
 		.compatible = "microcrystal,rv8803",
-		.data = (void *)rx_8900
+		.data = (void *)rv_8803
 	},
 	{
 		.compatible = "epson,rx8900",
-- 
2.20.1

[PATCH AUTOSEL 4.19 019/205] remoteproc/davinci: Use %zx for formating size_t

[Sasha Levin]

From: Bjorn Andersson <bjorn.andersson@linaro.org>

[ Upstream commit 1e28dbbeced6152b9ea7c417ff8cef3f7dcf0f19 ]

da8xx_rproc_mem size is of type size_t, so use %zx to format the debug
print of it to avoid a compile warning.

Acked-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/remoteproc/da8xx_remoteproc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/remoteproc/da8xx_remoteproc.c b/drivers/remoteproc/da8xx_remoteproc.c
index e230bef71be1c..d200334577f68 100644
--- a/drivers/remoteproc/da8xx_remoteproc.c
+++ b/drivers/remoteproc/da8xx_remoteproc.c
@@ -226,7 +226,7 @@ static int da8xx_rproc_get_internal_memories(struct platform_device *pdev,
 				res->start & DA8XX_RPROC_LOCAL_ADDRESS_MASK;
 		drproc->mem[i].size = resource_size(res);
 
-		dev_dbg(dev, "memory %8s: bus addr %pa size 0x%x va %p da 0x%x\n",
+		dev_dbg(dev, "memory %8s: bus addr %pa size 0x%zx va %p da 0x%x\n",
 			mem_names[i], &drproc->mem[i].bus_addr,
 			drproc->mem[i].size, drproc->mem[i].cpu_addr,
 			drproc->mem[i].dev_addr);
-- 
2.20.1

[PATCH AUTOSEL 4.19 020/205] extcon: cht-wc: Return from default case to avoid warnings

[Sasha Levin]

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

[ Upstream commit 962341b54b99965ebec5f70c8d39f1c382eea833 ]

When we have first case to fall through it's not enough to put
single comment there to satisfy compiler. Instead of doing that,
return fall back value directly from default case.

This to avoid following warnings:

drivers/extcon/extcon-intel-cht-wc.c: In function ‘cht_wc_extcon_get_charger’:
include/linux/device.h:1420:2: warning: this statement may fall through [-Wimplicit-fallthrough=]
  _dev_warn(dev, dev_fmt(fmt), ##__VA_ARGS__)
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/extcon/extcon-intel-cht-wc.c:148:3: note: in expansion of macro ‘dev_warn’
   dev_warn(ext->dev,
   ^~~~~~~~
drivers/extcon/extcon-intel-cht-wc.c:152:2: note: here
  case CHT_WC_USBSRC_TYPE_SDP:
  ^~~~

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/extcon/extcon-intel-cht-wc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/extcon/extcon-intel-cht-wc.c b/drivers/extcon/extcon-intel-cht-wc.c
index 5e1dd27722781..bdb67878179ed 100644
--- a/drivers/extcon/extcon-intel-cht-wc.c
+++ b/drivers/extcon/extcon-intel-cht-wc.c
@@ -156,7 +156,7 @@ static int cht_wc_extcon_get_charger(struct cht_wc_extcon_data *ext,
 		dev_warn(ext->dev,
 			"Unhandled charger type %d, defaulting to SDP\n",
 			 ret);
-		/* Fall through, treat as SDP */
+		return EXTCON_CHG_USB_SDP;
 	case CHT_WC_USBSRC_TYPE_SDP:
 	case CHT_WC_USBSRC_TYPE_FLOAT_DP_DN:
 	case CHT_WC_USBSRC_TYPE_OTHER:
-- 
2.20.1

[PATCH AUTOSEL 4.19 021/205] cfg80211: Avoid regulatory restore when COUNTRY_IE_IGNORE is set

[Sasha Levin]

From: Rajeev Kumar Sirasanagandla <rsirasan@codeaurora.org>

[ Upstream commit 7417844b63d4b0dc8ab23f88259bf95de7d09b57 ]

When REGULATORY_COUNTRY_IE_IGNORE is set,  __reg_process_hint_country_ie()
ignores the country code change request from __cfg80211_connect_result()
via regulatory_hint_country_ie().

After Disconnect, similar to above, country code should not be reset to
world when country IE ignore is set. But this is violated and restore of
regulatory settings is invoked by cfg80211_disconnect_work via
regulatory_hint_disconnect().

To address this, avoid regulatory restore from regulatory_hint_disconnect()
when COUNTRY_IE_IGNORE is set.

Note: Currently, restore_regulatory_settings() takes care of clearing
beacon hints. But in the proposed change, regulatory restore is avoided.
Therefore, explicitly clear beacon hints when DISABLE_BEACON_HINTS
is not set.

Signed-off-by: Rajeev Kumar Sirasanagandla <rsirasan@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/reg.c | 46 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)

diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index cccbf845079c8..68ae97ef8bf0b 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -3225,8 +3225,54 @@ static void restore_regulatory_settings(bool reset_user)
 	schedule_work(&reg_work);
 }
 
+static bool is_wiphy_all_set_reg_flag(enum ieee80211_regulatory_flags flag)
+{
+	struct cfg80211_registered_device *rdev;
+	struct wireless_dev *wdev;
+
+	list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
+		list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) {
+			wdev_lock(wdev);
+			if (!(wdev->wiphy->regulatory_flags & flag)) {
+				wdev_unlock(wdev);
+				return false;
+			}
+			wdev_unlock(wdev);
+		}
+	}
+
+	return true;
+}
+
 void regulatory_hint_disconnect(void)
 {
+	/* Restore of regulatory settings is not required when wiphy(s)
+	 * ignore IE from connected access point but clearance of beacon hints
+	 * is required when wiphy(s) supports beacon hints.
+	 */
+	if (is_wiphy_all_set_reg_flag(REGULATORY_COUNTRY_IE_IGNORE)) {
+		struct reg_beacon *reg_beacon, *btmp;
+
+		if (is_wiphy_all_set_reg_flag(REGULATORY_DISABLE_BEACON_HINTS))
+			return;
+
+		spin_lock_bh(&reg_pending_beacons_lock);
+		list_for_each_entry_safe(reg_beacon, btmp,
+					 &reg_pending_beacons, list) {
+			list_del(&reg_beacon->list);
+			kfree(reg_beacon);
+		}
+		spin_unlock_bh(&reg_pending_beacons_lock);
+
+		list_for_each_entry_safe(reg_beacon, btmp,
+					 &reg_beacon_list, list) {
+			list_del(&reg_beacon->list);
+			kfree(reg_beacon);
+		}
+
+		return;
+	}
+
 	pr_debug("All devices are disconnected, going to restore regulatory settings\n");
 	restore_regulatory_settings(false);
 }
-- 
2.20.1

[PATCH AUTOSEL 4.19 022/205] ALSA: seq: Do error checks at creating system ports

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit b8e131542b47b81236ecf6768c923128e1f5db6e ]

snd_seq_system_client_init() doesn't check the errors returned from
its port creations.  Let's do it properly and handle the error paths.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/core/seq/seq_system.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/sound/core/seq/seq_system.c b/sound/core/seq/seq_system.c
index 8ce1d0b40dce1..ce1f1e4727ab1 100644
--- a/sound/core/seq/seq_system.c
+++ b/sound/core/seq/seq_system.c
@@ -123,6 +123,7 @@ int __init snd_seq_system_client_init(void)
 {
 	struct snd_seq_port_callback pcallbacks;
 	struct snd_seq_port_info *port;
+	int err;
 
 	port = kzalloc(sizeof(*port), GFP_KERNEL);
 	if (!port)
@@ -144,7 +145,10 @@ int __init snd_seq_system_client_init(void)
 	port->flags = SNDRV_SEQ_PORT_FLG_GIVEN_PORT;
 	port->addr.client = sysclient;
 	port->addr.port = SNDRV_SEQ_PORT_SYSTEM_TIMER;
-	snd_seq_kernel_client_ctl(sysclient, SNDRV_SEQ_IOCTL_CREATE_PORT, port);
+	err = snd_seq_kernel_client_ctl(sysclient, SNDRV_SEQ_IOCTL_CREATE_PORT,
+					port);
+	if (err < 0)
+		goto error_port;
 
 	/* register announcement port */
 	strcpy(port->name, "Announce");
@@ -154,16 +158,24 @@ int __init snd_seq_system_client_init(void)
 	port->flags = SNDRV_SEQ_PORT_FLG_GIVEN_PORT;
 	port->addr.client = sysclient;
 	port->addr.port = SNDRV_SEQ_PORT_SYSTEM_ANNOUNCE;
-	snd_seq_kernel_client_ctl(sysclient, SNDRV_SEQ_IOCTL_CREATE_PORT, port);
+	err = snd_seq_kernel_client_ctl(sysclient, SNDRV_SEQ_IOCTL_CREATE_PORT,
+					port);
+	if (err < 0)
+		goto error_port;
 	announce_port = port->addr.port;
 
 	kfree(port);
 	return 0;
+
+ error_port:
+	snd_seq_system_client_done();
+	kfree(port);
+	return err;
 }
 
 
 /* unregister our internal client */
-void __exit snd_seq_system_client_done(void)
+void snd_seq_system_client_done(void)
 {
 	int oldsysclient = sysclient;
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 023/205] ath10k: skip resetting rx filter for WCN3990

[Sasha Levin]

From: Rakesh Pillai <pillair@codeaurora.org>

[ Upstream commit 58da3b42307061b71f2dcce2bd1185d578a3aa53 ]

WCN3990 has the MAC_PCU_ADDR1 configured properly
and hence it will not send spurious ack frames
during boot up.

Hence the reset_rx_filter workaround is not needed
for WCN3990. Add a hw_param to indicate if hardware rx
filter reset is needed and skip the reset_rx_filter for
WCN3990.

Tested HW: WCN3990
Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1

Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/core.c | 17 ++++++++++++++++-
 drivers/net/wireless/ath/ath10k/hw.h   |  5 +++++
 2 files changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 5210cffb53440..7e64fe426a055 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -91,6 +91,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL,
 		.shadow_reg_support = false,
 		.rri_on_ddr = false,
+		.hw_filter_reset_required = true,
 	},
 	{
 		.id = QCA988X_HW_2_0_VERSION,
@@ -124,6 +125,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.per_ce_irq = false,
 		.shadow_reg_support = false,
 		.rri_on_ddr = false,
+		.hw_filter_reset_required = true,
 	},
 	{
 		.id = QCA9887_HW_1_0_VERSION,
@@ -157,6 +159,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.per_ce_irq = false,
 		.shadow_reg_support = false,
 		.rri_on_ddr = false,
+		.hw_filter_reset_required = true,
 	},
 	{
 		.id = QCA6174_HW_2_1_VERSION,
@@ -189,6 +192,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.per_ce_irq = false,
 		.shadow_reg_support = false,
 		.rri_on_ddr = false,
+		.hw_filter_reset_required = true,
 	},
 	{
 		.id = QCA6174_HW_2_1_VERSION,
@@ -221,6 +225,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.per_ce_irq = false,
 		.shadow_reg_support = false,
 		.rri_on_ddr = false,
+		.hw_filter_reset_required = true,
 	},
 	{
 		.id = QCA6174_HW_3_0_VERSION,
@@ -253,6 +258,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.per_ce_irq = false,
 		.shadow_reg_support = false,
 		.rri_on_ddr = false,
+		.hw_filter_reset_required = true,
 	},
 	{
 		.id = QCA6174_HW_3_2_VERSION,
@@ -288,6 +294,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.per_ce_irq = false,
 		.shadow_reg_support = false,
 		.rri_on_ddr = false,
+		.hw_filter_reset_required = true,
 	},
 	{
 		.id = QCA99X0_HW_2_0_DEV_VERSION,
@@ -326,6 +333,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.per_ce_irq = false,
 		.shadow_reg_support = false,
 		.rri_on_ddr = false,
+		.hw_filter_reset_required = true,
 	},
 	{
 		.id = QCA9984_HW_1_0_DEV_VERSION,
@@ -369,6 +377,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.per_ce_irq = false,
 		.shadow_reg_support = false,
 		.rri_on_ddr = false,
+		.hw_filter_reset_required = true,
 	},
 	{
 		.id = QCA9888_HW_2_0_DEV_VERSION,
@@ -411,6 +420,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.per_ce_irq = false,
 		.shadow_reg_support = false,
 		.rri_on_ddr = false,
+		.hw_filter_reset_required = true,
 	},
 	{
 		.id = QCA9377_HW_1_0_DEV_VERSION,
@@ -443,6 +453,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.per_ce_irq = false,
 		.shadow_reg_support = false,
 		.rri_on_ddr = false,
+		.hw_filter_reset_required = true,
 	},
 	{
 		.id = QCA9377_HW_1_1_DEV_VERSION,
@@ -477,6 +488,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.per_ce_irq = false,
 		.shadow_reg_support = false,
 		.rri_on_ddr = false,
+		.hw_filter_reset_required = true,
 	},
 	{
 		.id = QCA4019_HW_1_0_DEV_VERSION,
@@ -516,6 +528,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.per_ce_irq = false,
 		.shadow_reg_support = false,
 		.rri_on_ddr = false,
+		.hw_filter_reset_required = true,
 	},
 	{
 		.id = WCN3990_HW_1_0_DEV_VERSION,
@@ -540,6 +553,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.per_ce_irq = true,
 		.shadow_reg_support = true,
 		.rri_on_ddr = true,
+		.hw_filter_reset_required = false,
 	},
 };
 
@@ -2406,7 +2420,8 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode,
 	 * possible to implicitly make it correct by creating a dummy vdev and
 	 * then deleting it.
 	 */
-	if (mode == ATH10K_FIRMWARE_MODE_NORMAL) {
+	if (ar->hw_params.hw_filter_reset_required &&
+	    mode == ATH10K_FIRMWARE_MODE_NORMAL) {
 		status = ath10k_core_reset_rx_filter(ar);
 		if (status) {
 			ath10k_err(ar,
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 977f79ebb4fd5..fac58c3c576a2 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -589,6 +589,11 @@ struct ath10k_hw_params {
 
 	/* Number of bytes to be the offset for each FFT sample */
 	int spectral_bin_offset;
+
+	/* targets which require hw filter reset during boot up,
+	 * to avoid it sending spurious acks.
+	 */
+	bool hw_filter_reset_required;
 };
 
 struct htt_rx_desc;
-- 
2.20.1

[PATCH AUTOSEL 4.19 023/205] ath10k: skip resetting rx filter for WCN3990

[Sasha Levin]

From: Rakesh Pillai <pillair@codeaurora.org>

[ Upstream commit 58da3b42307061b71f2dcce2bd1185d578a3aa53 ]

WCN3990 has the MAC_PCU_ADDR1 configured properly
and hence it will not send spurious ack frames
during boot up.

Hence the reset_rx_filter workaround is not needed
for WCN3990. Add a hw_param to indicate if hardware rx
filter reset is needed and skip the reset_rx_filter for
WCN3990.

Tested HW: WCN3990
Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1

Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/core.c | 17 ++++++++++++++++-
 drivers/net/wireless/ath/ath10k/hw.h   |  5 +++++
 2 files changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 5210cffb53440..7e64fe426a055 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -91,6 +91,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL,
 		.shadow_reg_support = false,
 		.rri_on_ddr = false,
+		.hw_filter_reset_required = true,
 	},
 	{
 		.id = QCA988X_HW_2_0_VERSION,
@@ -124,6 +125,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.per_ce_irq = false,
 		.shadow_reg_support = false,
 		.rri_on_ddr = false,
+		.hw_filter_reset_required = true,
 	},
 	{
 		.id = QCA9887_HW_1_0_VERSION,
@@ -157,6 +159,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.per_ce_irq = false,
 		.shadow_reg_support = false,
 		.rri_on_ddr = false,
+		.hw_filter_reset_required = true,
 	},
 	{
 		.id = QCA6174_HW_2_1_VERSION,
@@ -189,6 +192,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.per_ce_irq = false,
 		.shadow_reg_support = false,
 		.rri_on_ddr = false,
+		.hw_filter_reset_required = true,
 	},
 	{
 		.id = QCA6174_HW_2_1_VERSION,
@@ -221,6 +225,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.per_ce_irq = false,
 		.shadow_reg_support = false,
 		.rri_on_ddr = false,
+		.hw_filter_reset_required = true,
 	},
 	{
 		.id = QCA6174_HW_3_0_VERSION,
@@ -253,6 +258,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.per_ce_irq = false,
 		.shadow_reg_support = false,
 		.rri_on_ddr = false,
+		.hw_filter_reset_required = true,
 	},
 	{
 		.id = QCA6174_HW_3_2_VERSION,
@@ -288,6 +294,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.per_ce_irq = false,
 		.shadow_reg_support = false,
 		.rri_on_ddr = false,
+		.hw_filter_reset_required = true,
 	},
 	{
 		.id = QCA99X0_HW_2_0_DEV_VERSION,
@@ -326,6 +333,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.per_ce_irq = false,
 		.shadow_reg_support = false,
 		.rri_on_ddr = false,
+		.hw_filter_reset_required = true,
 	},
 	{
 		.id = QCA9984_HW_1_0_DEV_VERSION,
@@ -369,6 +377,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.per_ce_irq = false,
 		.shadow_reg_support = false,
 		.rri_on_ddr = false,
+		.hw_filter_reset_required = true,
 	},
 	{
 		.id = QCA9888_HW_2_0_DEV_VERSION,
@@ -411,6 +420,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.per_ce_irq = false,
 		.shadow_reg_support = false,
 		.rri_on_ddr = false,
+		.hw_filter_reset_required = true,
 	},
 	{
 		.id = QCA9377_HW_1_0_DEV_VERSION,
@@ -443,6 +453,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.per_ce_irq = false,
 		.shadow_reg_support = false,
 		.rri_on_ddr = false,
+		.hw_filter_reset_required = true,
 	},
 	{
 		.id = QCA9377_HW_1_1_DEV_VERSION,
@@ -477,6 +488,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.per_ce_irq = false,
 		.shadow_reg_support = false,
 		.rri_on_ddr = false,
+		.hw_filter_reset_required = true,
 	},
 	{
 		.id = QCA4019_HW_1_0_DEV_VERSION,
@@ -516,6 +528,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.per_ce_irq = false,
 		.shadow_reg_support = false,
 		.rri_on_ddr = false,
+		.hw_filter_reset_required = true,
 	},
 	{
 		.id = WCN3990_HW_1_0_DEV_VERSION,
@@ -540,6 +553,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.per_ce_irq = true,
 		.shadow_reg_support = true,
 		.rri_on_ddr = true,
+		.hw_filter_reset_required = false,
 	},
 };
 
@@ -2406,7 +2420,8 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode,
 	 * possible to implicitly make it correct by creating a dummy vdev and
 	 * then deleting it.
 	 */
-	if (mode == ATH10K_FIRMWARE_MODE_NORMAL) {
+	if (ar->hw_params.hw_filter_reset_required &&
+	    mode == ATH10K_FIRMWARE_MODE_NORMAL) {
 		status = ath10k_core_reset_rx_filter(ar);
 		if (status) {
 			ath10k_err(ar,
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 977f79ebb4fd5..fac58c3c576a2 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -589,6 +589,11 @@ struct ath10k_hw_params {
 
 	/* Number of bytes to be the offset for each FFT sample */
 	int spectral_bin_offset;
+
+	/* targets which require hw filter reset during boot up,
+	 * to avoid it sending spurious acks.
+	 */
+	bool hw_filter_reset_required;
 };
 
 struct htt_rx_desc;
-- 
2.20.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH AUTOSEL 4.19 024/205] ath9k: fix tx99 with monitor mode interface

[Sasha Levin]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit d9c52fd17cb483bd8a470398afcb79f86c1b77c8 ]

Tx99 is typically configured via a monitor mode interface, which does
not get added to the driver as a vif. Since the code currently expects
a configured virtual interface for tx99, enabling tx99 via debugfs fails.
Since the vif is not needed anyway, remove all checks for it.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
[kvalo@codeaurora.org: s/CPTCFG/CONFIG/]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/ath9k.h |  1 -
 drivers/net/wireless/ath/ath9k/main.c  | 12 +++---------
 drivers/net/wireless/ath/ath9k/tx99.c  |  9 ---------
 drivers/net/wireless/ath/ath9k/xmit.c  |  2 +-
 4 files changed, 4 insertions(+), 20 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 0fca44e91a712..50206a6d8a850 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -1074,7 +1074,6 @@ struct ath_softc {
 
 	struct ath_spec_scan_priv spec_priv;
 
-	struct ieee80211_vif *tx99_vif;
 	struct sk_buff *tx99_skb;
 	bool tx99_state;
 	s16 tx99_power;
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 1049773378f27..6ce4b9f1dcb44 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1251,15 +1251,10 @@ static int ath9k_add_interface(struct ieee80211_hw *hw,
 	struct ath_vif *avp = (void *)vif->drv_priv;
 	struct ath_node *an = &avp->mcast_node;
 
-	mutex_lock(&sc->mutex);
+	if (IS_ENABLED(CONFIG_ATH9K_TX99))
+		return -EOPNOTSUPP;
 
-	if (IS_ENABLED(CONFIG_ATH9K_TX99)) {
-		if (sc->cur_chan->nvifs >= 1) {
-			mutex_unlock(&sc->mutex);
-			return -EOPNOTSUPP;
-		}
-		sc->tx99_vif = vif;
-	}
+	mutex_lock(&sc->mutex);
 
 	ath_dbg(common, CONFIG, "Attach a VIF of type: %d\n", vif->type);
 	sc->cur_chan->nvifs++;
@@ -1342,7 +1337,6 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw,
 	ath9k_p2p_remove_vif(sc, vif);
 
 	sc->cur_chan->nvifs--;
-	sc->tx99_vif = NULL;
 	if (!ath9k_is_chanctx_enabled())
 		list_del(&avp->list);
 
diff --git a/drivers/net/wireless/ath/ath9k/tx99.c b/drivers/net/wireless/ath/ath9k/tx99.c
index ce50d8f5835e0..9b05ffb68c34a 100644
--- a/drivers/net/wireless/ath/ath9k/tx99.c
+++ b/drivers/net/wireless/ath/ath9k/tx99.c
@@ -54,12 +54,6 @@ static struct sk_buff *ath9k_build_tx99_skb(struct ath_softc *sc)
 	struct ieee80211_hdr *hdr;
 	struct ieee80211_tx_info *tx_info;
 	struct sk_buff *skb;
-	struct ath_vif *avp;
-
-	if (!sc->tx99_vif)
-		return NULL;
-
-	avp = (struct ath_vif *)sc->tx99_vif->drv_priv;
 
 	skb = alloc_skb(len, GFP_KERNEL);
 	if (!skb)
@@ -77,14 +71,11 @@ static struct sk_buff *ath9k_build_tx99_skb(struct ath_softc *sc)
 	memcpy(hdr->addr2, hw->wiphy->perm_addr, ETH_ALEN);
 	memcpy(hdr->addr3, hw->wiphy->perm_addr, ETH_ALEN);
 
-	hdr->seq_ctrl |= cpu_to_le16(avp->seq_no);
-
 	tx_info = IEEE80211_SKB_CB(skb);
 	memset(tx_info, 0, sizeof(*tx_info));
 	rate = &tx_info->control.rates[0];
 	tx_info->band = sc->cur_chan->chandef.chan->band;
 	tx_info->flags = IEEE80211_TX_CTL_NO_ACK;
-	tx_info->control.vif = sc->tx99_vif;
 	rate->count = 1;
 	if (ah->curchan && IS_CHAN_HT(ah->curchan)) {
 		rate->flags |= IEEE80211_TX_RC_MCS;
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 4b7a7fc2a0fe0..3ae8d0585b6f3 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -2974,7 +2974,7 @@ int ath9k_tx99_send(struct ath_softc *sc, struct sk_buff *skb,
 		return -EINVAL;
 	}
 
-	ath_set_rates(sc->tx99_vif, NULL, bf);
+	ath_set_rates(NULL, NULL, bf);
 
 	ath9k_hw_set_desc_link(sc->sc_ah, bf->bf_desc, bf->bf_daddr);
 	ath9k_hw_tx99_start(sc->sc_ah, txctl->txq->axq_qnum);
-- 
2.20.1

[PATCH AUTOSEL 4.19 025/205] wil6210: drop Rx multicast packets that are looped-back to STA

[Sasha Levin]

From: Dedy Lansky <dlansky@codeaurora.org>

[ Upstream commit 9a65064abdf82934e0ed4744125f9f466f421f57 ]

Delivering a looped-back multicast packet to network stack can cause
higher layer protocols to fail like for example IPv6 DAD.
In STA mode, upon receiving Rx multicast packet, check if the source
MAC address is equal to our own MAC address and if so drop the packet.

Signed-off-by: Dedy Lansky <dlansky@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/wil6210/txrx.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 1b1b58e0129a3..25a65ca424c84 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -766,7 +766,14 @@ void wil_netif_rx_any(struct sk_buff *skb, struct net_device *ndev)
 		return;
 	}
 
-	if (wdev->iftype == NL80211_IFTYPE_AP && !vif->ap_isolate) {
+	if (wdev->iftype == NL80211_IFTYPE_STATION) {
+		if (mcast && ether_addr_equal(eth->h_source, ndev->dev_addr)) {
+			/* mcast packet looped back to us */
+			rc = GRO_DROP;
+			dev_kfree_skb(skb);
+			goto stats;
+		}
+	} else if (wdev->iftype == NL80211_IFTYPE_AP && !vif->ap_isolate) {
 		if (mcast) {
 			/* send multicast frames both to higher layers in
 			 * local net stack and back to the wireless medium
-- 
2.20.1

[PATCH AUTOSEL 4.19 026/205] wil6210: set edma variables only for Talyn-MB devices

[Sasha Levin]

From: Maya Erez <merez@codeaurora.org>

[ Upstream commit 596bdbcce90fa93f43ebcb99cefea34bd2e27707 ]

use_rx_hw_reordering is already set to true in wil_set_capabilities
for Talyn-MB devices. Remove its setting from wil_priv_init to
prevent its activation for older chips.
Similarly, move the setting of use_compressed_rx_status to
wil_set_capabilities.

Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/wil6210/main.c     | 2 --
 drivers/net/wireless/ath/wil6210/pcie_bus.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index a0fe8cbad104f..d186b6886c6bf 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -653,8 +653,6 @@ int wil_priv_init(struct wil6210_priv *wil)
 
 	/* edma configuration can be updated via debugfs before allocation */
 	wil->num_rx_status_rings = WIL_DEFAULT_NUM_RX_STATUS_RINGS;
-	wil->use_compressed_rx_status = true;
-	wil->use_rx_hw_reordering = true;
 	wil->tx_status_ring_order = WIL_TX_SRING_SIZE_ORDER_DEFAULT;
 
 	/* Rx status ring size should be bigger than the number of RX buffers
diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c
index 89119e7facd00..c8c6613371d1b 100644
--- a/drivers/net/wireless/ath/wil6210/pcie_bus.c
+++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c
@@ -108,6 +108,7 @@ int wil_set_capabilities(struct wil6210_priv *wil)
 		set_bit(hw_capa_no_flash, wil->hw_capa);
 		wil->use_enhanced_dma_hw = true;
 		wil->use_rx_hw_reordering = true;
+		wil->use_compressed_rx_status = true;
 		wil_fw_name = ftm_mode ? WIL_FW_NAME_FTM_TALYN :
 			      WIL_FW_NAME_TALYN;
 		if (wil_fw_verify_file_exists(wil, wil_fw_name))
-- 
2.20.1

[PATCH AUTOSEL 4.19 027/205] wil6210: prevent usage of tx ring 0 for eDMA

[Sasha Levin]

From: Maya Erez <merez@codeaurora.org>

[ Upstream commit df2b53884a5a454bf441ca78e5b57307262c73f4 ]

In enhanced DMA ring 0 is used for RX ring, hence TX ring 0
is an unused element in ring_tx and ring2cid_tid arrays.
Initialize ring2cid_tid CID to WIL6210_MAX_CID to prevent a false
match of CID 0.
Go over the ring_tx and ring2cid_tid from wil_get_min_tx_ring_id
and on to prevent access to index 0 in eDMA.

Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/wil6210/main.c | 7 +++++--
 drivers/net/wireless/ath/wil6210/txrx.c | 6 ++++--
 2 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index d186b6886c6bf..920cb233f4db7 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -223,6 +223,7 @@ __acquires(&sta->tid_rx_lock) __releases(&sta->tid_rx_lock)
 	struct net_device *ndev = vif_to_ndev(vif);
 	struct wireless_dev *wdev = vif_to_wdev(vif);
 	struct wil_sta_info *sta = &wil->sta[cid];
+	int min_ring_id = wil_get_min_tx_ring_id(wil);
 
 	might_sleep();
 	wil_dbg_misc(wil, "disconnect_cid: CID %d, MID %d, status %d\n",
@@ -273,7 +274,7 @@ __acquires(&sta->tid_rx_lock) __releases(&sta->tid_rx_lock)
 	memset(sta->tid_crypto_rx, 0, sizeof(sta->tid_crypto_rx));
 	memset(&sta->group_crypto_rx, 0, sizeof(sta->group_crypto_rx));
 	/* release vrings */
-	for (i = 0; i < ARRAY_SIZE(wil->ring_tx); i++) {
+	for (i = min_ring_id; i < ARRAY_SIZE(wil->ring_tx); i++) {
 		if (wil->ring2cid_tid[i][0] == cid)
 			wil_ring_fini_tx(wil, i);
 	}
@@ -604,8 +605,10 @@ int wil_priv_init(struct wil6210_priv *wil)
 		wil->sta[i].mid = U8_MAX;
 	}
 
-	for (i = 0; i < WIL6210_MAX_TX_RINGS; i++)
+	for (i = 0; i < WIL6210_MAX_TX_RINGS; i++) {
 		spin_lock_init(&wil->ring_tx_data[i].lock);
+		wil->ring2cid_tid[i][0] = WIL6210_MAX_CID;
+	}
 
 	mutex_init(&wil->mutex);
 	mutex_init(&wil->vif_mutex);
diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 25a65ca424c84..73cdf54521f9b 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -77,8 +77,9 @@ bool wil_is_tx_idle(struct wil6210_priv *wil)
 {
 	int i;
 	unsigned long data_comp_to;
+	int min_ring_id = wil_get_min_tx_ring_id(wil);
 
-	for (i = 0; i < WIL6210_MAX_TX_RINGS; i++) {
+	for (i = min_ring_id; i < WIL6210_MAX_TX_RINGS; i++) {
 		struct wil_ring *vring = &wil->ring_tx[i];
 		int vring_index = vring - wil->ring_tx;
 		struct wil_ring_tx_data *txdata =
@@ -1945,6 +1946,7 @@ static inline void __wil_update_net_queues(struct wil6210_priv *wil,
 					   bool check_stop)
 {
 	int i;
+	int min_ring_id = wil_get_min_tx_ring_id(wil);
 
 	if (unlikely(!vif))
 		return;
@@ -1977,7 +1979,7 @@ static inline void __wil_update_net_queues(struct wil6210_priv *wil,
 		return;
 
 	/* check wake */
-	for (i = 0; i < WIL6210_MAX_TX_RINGS; i++) {
+	for (i = min_ring_id; i < WIL6210_MAX_TX_RINGS; i++) {
 		struct wil_ring *cur_ring = &wil->ring_tx[i];
 		struct wil_ring_tx_data  *txdata = &wil->ring_tx_data[i];
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 028/205] wil6210: fix invalid memory access for rx_buff_mgmt debugfs

[Sasha Levin]

From: Dedy Lansky <dlansky@codeaurora.org>

[ Upstream commit 4405b632e3da839defec966e4b0be44d0c5e3102 ]

Check rx_buff_mgmt is allocated before accessing its internal fields.

Signed-off-by: Dedy Lansky <dlansky@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/wil6210/debugfs.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/wireless/ath/wil6210/debugfs.c b/drivers/net/wireless/ath/wil6210/debugfs.c
index 51c3330bc316f..ceace95b1595c 100644
--- a/drivers/net/wireless/ath/wil6210/debugfs.c
+++ b/drivers/net/wireless/ath/wil6210/debugfs.c
@@ -1263,6 +1263,9 @@ static int wil_rx_buff_mgmt_debugfs_show(struct seq_file *s, void *data)
 	int num_active;
 	int num_free;
 
+	if (!rbm->buff_arr)
+		return -EINVAL;
+
 	seq_printf(s, "  size = %zu\n", rbm->size);
 	seq_printf(s, "  free_list_empty_cnt = %lu\n",
 		   rbm->free_list_empty_cnt);
-- 
2.20.1

[PATCH AUTOSEL 4.19 029/205] ath10k: limit available channels via DT ieee80211-freq-limit

[Sasha Levin]

From: Sven Eckelmann <sven.eckelmann@openmesh.com>

[ Upstream commit 34d5629d2ca89d847b7040762b87964c696c14da ]

Tri-band devices (1x 2.4GHz + 2x 5GHz) often incorporate special filters in
the RX and TX path. These filtered channel can in theory still be used by
the hardware but the signal strength is reduced so much that it makes no
sense.

There is already a DT property to limit the available channels but ath10k
has to manually call this functionality to limit the currrently set wiphy
channels further.

Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/mac.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 1419f9d1505fe..9d033da46ec2e 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -18,6 +18,7 @@
 
 #include "mac.h"
 
+#include <net/cfg80211.h>
 #include <net/mac80211.h>
 #include <linux/etherdevice.h>
 #include <linux/acpi.h>
@@ -8363,6 +8364,7 @@ int ath10k_mac_register(struct ath10k *ar)
 		ar->hw->wiphy->bands[NL80211_BAND_5GHZ] = band;
 	}
 
+	wiphy_read_of_freq_limits(ar->hw->wiphy);
 	ath10k_mac_setup_ht_vht_cap(ar);
 
 	ar->hw->wiphy->interface_modes =
-- 
2.20.1

[PATCH AUTOSEL 4.19 029/205] ath10k: limit available channels via DT ieee80211-freq-limit

[Sasha Levin]

From: Sven Eckelmann <sven.eckelmann@openmesh.com>

[ Upstream commit 34d5629d2ca89d847b7040762b87964c696c14da ]

Tri-band devices (1x 2.4GHz + 2x 5GHz) often incorporate special filters in
the RX and TX path. These filtered channel can in theory still be used by
the hardware but the signal strength is reduced so much that it makes no
sense.

There is already a DT property to limit the available channels but ath10k
has to manually call this functionality to limit the currrently set wiphy
channels further.

Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/mac.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 1419f9d1505fe..9d033da46ec2e 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -18,6 +18,7 @@
 
 #include "mac.h"
 
+#include <net/cfg80211.h>
 #include <net/mac80211.h>
 #include <linux/etherdevice.h>
 #include <linux/acpi.h>
@@ -8363,6 +8364,7 @@ int ath10k_mac_register(struct ath10k *ar)
 		ar->hw->wiphy->bands[NL80211_BAND_5GHZ] = band;
 	}
 
+	wiphy_read_of_freq_limits(ar->hw->wiphy);
 	ath10k_mac_setup_ht_vht_cap(ar);
 
 	ar->hw->wiphy->interface_modes =
-- 
2.20.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH AUTOSEL 4.19 030/205] ice: Update request resource command to latest specification

[Sasha Levin]

From: Dan Nowlin <dan.nowlin@intel.com>

[ Upstream commit ff2b13213a6a0baca105bc3bc724225f0adde1f8 ]

Align Request Resource Ownership AQ command (0x0008) to the latest
specification. This includes:

- Correcting the resource IDs for the Global Cfg and Change locks.
- new enum ICE_CHANGE_LOCK_RES_ID
- new enum ICE_GLOBAL_CFG_LOCK_RES_ID
- Altering the flow for Global Config Lock to allow only the first PF to
  download the package.

Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_common.c | 75 ++++++++++++++++-----
 drivers/net/ethernet/intel/ice/ice_common.h |  2 +-
 drivers/net/ethernet/intel/ice/ice_nvm.c    |  2 +-
 drivers/net/ethernet/intel/ice/ice_type.h   |  9 ++-
 4 files changed, 67 insertions(+), 21 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_common.c b/drivers/net/ethernet/intel/ice/ice_common.c
index 661beea6af795..f8d00263d9019 100644
--- a/drivers/net/ethernet/intel/ice/ice_common.c
+++ b/drivers/net/ethernet/intel/ice/ice_common.c
@@ -904,7 +904,22 @@ enum ice_status ice_aq_q_shutdown(struct ice_hw *hw, bool unloading)
  * @timeout: the maximum time in ms that the driver may hold the resource
  * @cd: pointer to command details structure or NULL
  *
- * requests common resource using the admin queue commands (0x0008)
+ * Requests common resource using the admin queue commands (0x0008).
+ * When attempting to acquire the Global Config Lock, the driver can
+ * learn of three states:
+ *  1) ICE_SUCCESS -        acquired lock, and can perform download package
+ *  2) ICE_ERR_AQ_ERROR -   did not get lock, driver should fail to load
+ *  3) ICE_ERR_AQ_NO_WORK - did not get lock, but another driver has
+ *                          successfully downloaded the package; the driver does
+ *                          not have to download the package and can continue
+ *                          loading
+ *
+ * Note that if the caller is in an acquire lock, perform action, release lock
+ * phase of operation, it is possible that the FW may detect a timeout and issue
+ * a CORER. In this case, the driver will receive a CORER interrupt and will
+ * have to determine its cause. The calling thread that is handling this flow
+ * will likely get an error propagated back to it indicating the Download
+ * Package, Update Package or the Release Resource AQ commands timed out.
  */
 static enum ice_status
 ice_aq_req_res(struct ice_hw *hw, enum ice_aq_res_ids res,
@@ -922,13 +937,43 @@ ice_aq_req_res(struct ice_hw *hw, enum ice_aq_res_ids res,
 	cmd_resp->res_id = cpu_to_le16(res);
 	cmd_resp->access_type = cpu_to_le16(access);
 	cmd_resp->res_number = cpu_to_le32(sdp_number);
+	cmd_resp->timeout = cpu_to_le32(*timeout);
+	*timeout = 0;
 
 	status = ice_aq_send_cmd(hw, &desc, NULL, 0, cd);
+
 	/* The completion specifies the maximum time in ms that the driver
 	 * may hold the resource in the Timeout field.
-	 * If the resource is held by someone else, the command completes with
-	 * busy return value and the timeout field indicates the maximum time
-	 * the current owner of the resource has to free it.
+	 */
+
+	/* Global config lock response utilizes an additional status field.
+	 *
+	 * If the Global config lock resource is held by some other driver, the
+	 * command completes with ICE_AQ_RES_GLBL_IN_PROG in the status field
+	 * and the timeout field indicates the maximum time the current owner
+	 * of the resource has to free it.
+	 */
+	if (res == ICE_GLOBAL_CFG_LOCK_RES_ID) {
+		if (le16_to_cpu(cmd_resp->status) == ICE_AQ_RES_GLBL_SUCCESS) {
+			*timeout = le32_to_cpu(cmd_resp->timeout);
+			return 0;
+		} else if (le16_to_cpu(cmd_resp->status) ==
+			   ICE_AQ_RES_GLBL_IN_PROG) {
+			*timeout = le32_to_cpu(cmd_resp->timeout);
+			return ICE_ERR_AQ_ERROR;
+		} else if (le16_to_cpu(cmd_resp->status) ==
+			   ICE_AQ_RES_GLBL_DONE) {
+			return ICE_ERR_AQ_NO_WORK;
+		}
+
+		/* invalid FW response, force a timeout immediately */
+		*timeout = 0;
+		return ICE_ERR_AQ_ERROR;
+	}
+
+	/* If the resource is held by some other driver, the command completes
+	 * with a busy return value and the timeout field indicates the maximum
+	 * time the current owner of the resource has to free it.
 	 */
 	if (!status || hw->adminq.sq_last_status == ICE_AQ_RC_EBUSY)
 		*timeout = le32_to_cpu(cmd_resp->timeout);
@@ -967,30 +1012,28 @@ ice_aq_release_res(struct ice_hw *hw, enum ice_aq_res_ids res, u8 sdp_number,
  * @hw: pointer to the HW structure
  * @res: resource id
  * @access: access type (read or write)
+ * @timeout: timeout in milliseconds
  *
  * This function will attempt to acquire the ownership of a resource.
  */
 enum ice_status
 ice_acquire_res(struct ice_hw *hw, enum ice_aq_res_ids res,
-		enum ice_aq_res_access_type access)
+		enum ice_aq_res_access_type access, u32 timeout)
 {
 #define ICE_RES_POLLING_DELAY_MS	10
 	u32 delay = ICE_RES_POLLING_DELAY_MS;
+	u32 time_left = timeout;
 	enum ice_status status;
-	u32 time_left = 0;
-	u32 timeout;
 
 	status = ice_aq_req_res(hw, res, access, 0, &time_left, NULL);
 
-	/* An admin queue return code of ICE_AQ_RC_EEXIST means that another
-	 * driver has previously acquired the resource and performed any
-	 * necessary updates; in this case the caller does not obtain the
-	 * resource and has no further work to do.
+	/* A return code of ICE_ERR_AQ_NO_WORK means that another driver has
+	 * previously acquired the resource and performed any necessary updates;
+	 * in this case the caller does not obtain the resource and has no
+	 * further work to do.
 	 */
-	if (hw->adminq.sq_last_status == ICE_AQ_RC_EEXIST) {
-		status = ICE_ERR_AQ_NO_WORK;
+	if (status == ICE_ERR_AQ_NO_WORK)
 		goto ice_acquire_res_exit;
-	}
 
 	if (status)
 		ice_debug(hw, ICE_DBG_RES,
@@ -1003,11 +1046,9 @@ ice_acquire_res(struct ice_hw *hw, enum ice_aq_res_ids res,
 		timeout = (timeout > delay) ? timeout - delay : 0;
 		status = ice_aq_req_res(hw, res, access, 0, &time_left, NULL);
 
-		if (hw->adminq.sq_last_status == ICE_AQ_RC_EEXIST) {
+		if (status == ICE_ERR_AQ_NO_WORK)
 			/* lock free, but no work to do */
-			status = ICE_ERR_AQ_NO_WORK;
 			break;
-		}
 
 		if (!status)
 			/* lock acquired */
diff --git a/drivers/net/ethernet/intel/ice/ice_common.h b/drivers/net/ethernet/intel/ice/ice_common.h
index 9a5519130af13..6455b6952ec8e 100644
--- a/drivers/net/ethernet/intel/ice/ice_common.h
+++ b/drivers/net/ethernet/intel/ice/ice_common.h
@@ -23,7 +23,7 @@ enum ice_status
 ice_get_link_status(struct ice_port_info *pi, bool *link_up);
 enum ice_status
 ice_acquire_res(struct ice_hw *hw, enum ice_aq_res_ids res,
-		enum ice_aq_res_access_type access);
+		enum ice_aq_res_access_type access, u32 timeout);
 void ice_release_res(struct ice_hw *hw, enum ice_aq_res_ids res);
 enum ice_status ice_init_nvm(struct ice_hw *hw);
 enum ice_status
diff --git a/drivers/net/ethernet/intel/ice/ice_nvm.c b/drivers/net/ethernet/intel/ice/ice_nvm.c
index 295a8cd87fc16..3274c543283c6 100644
--- a/drivers/net/ethernet/intel/ice/ice_nvm.c
+++ b/drivers/net/ethernet/intel/ice/ice_nvm.c
@@ -137,7 +137,7 @@ ice_acquire_nvm(struct ice_hw *hw, enum ice_aq_res_access_type access)
 	if (hw->nvm.blank_nvm_mode)
 		return 0;
 
-	return ice_acquire_res(hw, ICE_NVM_RES_ID, access);
+	return ice_acquire_res(hw, ICE_NVM_RES_ID, access, ICE_NVM_TIMEOUT);
 }
 
 /**
diff --git a/drivers/net/ethernet/intel/ice/ice_type.h b/drivers/net/ethernet/intel/ice/ice_type.h
index ba11b58988331..a509fe5f1e543 100644
--- a/drivers/net/ethernet/intel/ice/ice_type.h
+++ b/drivers/net/ethernet/intel/ice/ice_type.h
@@ -34,10 +34,15 @@ static inline bool ice_is_tc_ena(u8 bitmap, u8 tc)
 enum ice_aq_res_ids {
 	ICE_NVM_RES_ID = 1,
 	ICE_SPD_RES_ID,
-	ICE_GLOBAL_CFG_LOCK_RES_ID,
-	ICE_CHANGE_LOCK_RES_ID
+	ICE_CHANGE_LOCK_RES_ID,
+	ICE_GLOBAL_CFG_LOCK_RES_ID
 };
 
+/* FW update timeout definitions are in milliseconds */
+#define ICE_NVM_TIMEOUT			180000
+#define ICE_CHANGE_LOCK_TIMEOUT		1000
+#define ICE_GLOBAL_CFG_LOCK_TIMEOUT	3000
+
 enum ice_aq_res_access_type {
 	ICE_RES_READ = 1,
 	ICE_RES_WRITE
-- 
2.20.1

[PATCH AUTOSEL 4.19 031/205] ice: Prevent control queue operations during reset

[Sasha Levin]

From: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>

[ Upstream commit fd2a981777d911b2e94cdec50779c85c58a0dec9 ]

Once reset is issued, the driver loses all control queue interfaces.
Exercising control queue operations during reset is incorrect and
may result in long timeouts.

This patch introduces a new field 'reset_ongoing' in the hw structure.
This is set to 1 by the core driver when it receives a reset interrupt.
ice_sq_send_cmd checks reset_ongoing before actually issuing the control
queue operation. If a reset is in progress, it returns a soft error code
(ICE_ERR_RESET_PENDING) to the caller. The caller may or may not have to
take any action based on this return. Once the driver knows that the
reset is done, it has to set reset_ongoing back to 0. This will allow
control queue operations to be posted to the hardware again.

This "bail out" logic was specifically added to ice_sq_send_cmd (which
is pretty low level function) so that we have one solution in one place
that applies to all types of control queues.

Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_controlq.c |  3 ++
 drivers/net/ethernet/intel/ice/ice_main.c     | 34 ++++++++++++++++---
 drivers/net/ethernet/intel/ice/ice_status.h   |  1 +
 drivers/net/ethernet/intel/ice/ice_type.h     |  1 +
 4 files changed, 34 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_controlq.c b/drivers/net/ethernet/intel/ice/ice_controlq.c
index e783976c401d8..89f18fe18fe36 100644
--- a/drivers/net/ethernet/intel/ice/ice_controlq.c
+++ b/drivers/net/ethernet/intel/ice/ice_controlq.c
@@ -814,6 +814,9 @@ ice_sq_send_cmd(struct ice_hw *hw, struct ice_ctl_q_info *cq,
 	u16 retval = 0;
 	u32 val = 0;
 
+	/* if reset is in progress return a soft error */
+	if (hw->reset_ongoing)
+		return ICE_ERR_RESET_ONGOING;
 	mutex_lock(&cq->sq_lock);
 
 	cq->sq_last_status = ICE_AQ_RC_OK;
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index 875f97aba6e0d..e1f95e7a51393 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -535,10 +535,13 @@ static void ice_reset_subtask(struct ice_pf *pf)
 		ice_prepare_for_reset(pf);
 
 		/* make sure we are ready to rebuild */
-		if (ice_check_reset(&pf->hw))
+		if (ice_check_reset(&pf->hw)) {
 			set_bit(__ICE_RESET_FAILED, pf->state);
-		else
+		} else {
+			/* done with reset. start rebuild */
+			pf->hw.reset_ongoing = false;
 			ice_rebuild(pf);
+		}
 		clear_bit(__ICE_RESET_RECOVERY_PENDING, pf->state);
 		goto unlock;
 	}
@@ -1757,7 +1760,8 @@ static irqreturn_t ice_misc_intr(int __always_unused irq, void *data)
 		 * We also make note of which reset happened so that peer
 		 * devices/drivers can be informed.
 		 */
-		if (!test_bit(__ICE_RESET_RECOVERY_PENDING, pf->state)) {
+		if (!test_and_set_bit(__ICE_RESET_RECOVERY_PENDING,
+				      pf->state)) {
 			if (reset == ICE_RESET_CORER)
 				set_bit(__ICE_CORER_RECV, pf->state);
 			else if (reset == ICE_RESET_GLOBR)
@@ -1765,7 +1769,20 @@ static irqreturn_t ice_misc_intr(int __always_unused irq, void *data)
 			else
 				set_bit(__ICE_EMPR_RECV, pf->state);
 
-			set_bit(__ICE_RESET_RECOVERY_PENDING, pf->state);
+			/* There are couple of different bits at play here.
+			 * hw->reset_ongoing indicates whether the hardware is
+			 * in reset. This is set to true when a reset interrupt
+			 * is received and set back to false after the driver
+			 * has determined that the hardware is out of reset.
+			 *
+			 * __ICE_RESET_RECOVERY_PENDING in pf->state indicates
+			 * that a post reset rebuild is required before the
+			 * driver is operational again. This is set above.
+			 *
+			 * As this is the start of the reset/rebuild cycle, set
+			 * both to indicate that.
+			 */
+			hw->reset_ongoing = true;
 		}
 	}
 
@@ -4188,7 +4205,14 @@ static int ice_vsi_stop_tx_rings(struct ice_vsi *vsi)
 	}
 	status = ice_dis_vsi_txq(vsi->port_info, vsi->num_txq, q_ids, q_teids,
 				 NULL);
-	if (status) {
+	/* if the disable queue command was exercised during an active reset
+	 * flow, ICE_ERR_RESET_ONGOING is returned. This is not an error as
+	 * the reset operation disables queues at the hardware level anyway.
+	 */
+	if (status == ICE_ERR_RESET_ONGOING) {
+		dev_dbg(&pf->pdev->dev,
+			"Reset in progress. LAN Tx queues already disabled\n");
+	} else if (status) {
 		dev_err(&pf->pdev->dev,
 			"Failed to disable LAN Tx queues, error: %d\n",
 			status);
diff --git a/drivers/net/ethernet/intel/ice/ice_status.h b/drivers/net/ethernet/intel/ice/ice_status.h
index 9a95c4ffd7d79..d2dae913d81e0 100644
--- a/drivers/net/ethernet/intel/ice/ice_status.h
+++ b/drivers/net/ethernet/intel/ice/ice_status.h
@@ -20,6 +20,7 @@ enum ice_status {
 	ICE_ERR_ALREADY_EXISTS			= -14,
 	ICE_ERR_DOES_NOT_EXIST			= -15,
 	ICE_ERR_MAX_LIMIT			= -17,
+	ICE_ERR_RESET_ONGOING			= -18,
 	ICE_ERR_BUF_TOO_SHORT			= -52,
 	ICE_ERR_NVM_BLANK_MODE			= -53,
 	ICE_ERR_AQ_ERROR			= -100,
diff --git a/drivers/net/ethernet/intel/ice/ice_type.h b/drivers/net/ethernet/intel/ice/ice_type.h
index a509fe5f1e543..5ca9d684429d1 100644
--- a/drivers/net/ethernet/intel/ice/ice_type.h
+++ b/drivers/net/ethernet/intel/ice/ice_type.h
@@ -293,6 +293,7 @@ struct ice_hw {
 	u8 sw_entry_point_layer;
 
 	u8 evb_veb;		/* true for VEB, false for VEPA */
+	u8 reset_ongoing;	/* true if hw is in reset, false otherwise */
 	struct ice_bus_info bus;
 	struct ice_nvm_info nvm;
 	struct ice_hw_dev_caps dev_caps;	/* device capabilities */
-- 
2.20.1

[PATCH AUTOSEL 4.19 032/205] gfs2: Don't set GFS2_RDF_UPTODATE when the lvb is updated

[Sasha Levin]

From: Bob Peterson <rpeterso@redhat.com>

[ Upstream commit 4f36cb36c9d14340bb200d2ad9117b03ce992cfe ]

The GFS2_RDF_UPTODATE flag in the rgrp is used to determine when
a rgrp buffer is valid. It's cleared when the glock is invalidated,
signifying that the buffer data is now invalid. But before this
patch, function update_rgrp_lvb was setting the flag when it
determined it had a valid lvb. But that's an invalid assumption:
just because you have a valid lvb doesn't mean you have valid
buffers. After all, another node may have made the lvb valid,
and this node just fetched it from the glock via dlm.

Consider this scenario:
1. The file system is mounted with RGRPLVB option.
2. In gfs2_inplace_reserve it locks the rgrp glock EX, but thanks
   to GL_SKIP, it skips the gfs2_rgrp_bh_get.
3. Since loops == 0 and the allocation target (ap->target) is
   bigger than the largest known chunk of blocks in the rgrp
   (rs->rs_rbm.rgd->rd_extfail_pt) it skips that rgrp and bypasses
   the call to gfs2_rgrp_bh_get there as well.
4. update_rgrp_lvb sees the lvb MAGIC number is valid, so bypasses
   gfs2_rgrp_bh_get, but it still sets sets GFS2_RDF_UPTODATE due
   to this invalid assumption.
5. The next time update_rgrp_lvb is called, it sees the bit is set
   and just returns 0, assuming both the lvb and rgrp are both
   uptodate. But since this is a smaller allocation, or space has
   been freed by another node, thus adjusting the lvb values,
   it decides to use the rgrp for allocations, with invalid rd_free
   due to the fact it was never updated.

This patch changes update_rgrp_lvb so it doesn't set the UPTODATE
flag anymore. That way, it has no choice but to fetch the latest
values.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/gfs2/rgrp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c
index 449d0cb45a845..63e5387c84d26 100644
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -1227,7 +1227,7 @@ static int update_rgrp_lvb(struct gfs2_rgrpd *rgd)
 	rl_flags = be32_to_cpu(rgd->rd_rgl->rl_flags);
 	rl_flags &= ~GFS2_RDF_MASK;
 	rgd->rd_flags &= GFS2_RDF_MASK;
-	rgd->rd_flags |= (rl_flags | GFS2_RDF_UPTODATE | GFS2_RDF_CHECK);
+	rgd->rd_flags |= (rl_flags | GFS2_RDF_CHECK);
 	if (rgd->rd_rgl->rl_unlinked == 0)
 		rgd->rd_flags &= ~GFS2_RDF_CHECK;
 	rgd->rd_free = be32_to_cpu(rgd->rd_rgl->rl_free);
-- 
2.20.1

[Cluster-devel] [PATCH AUTOSEL 4.19 032/205] gfs2: Don't set GFS2_RDF_UPTODATE when the lvb is updated

[Sasha Levin]

From: Bob Peterson <rpeterso@redhat.com>

[ Upstream commit 4f36cb36c9d14340bb200d2ad9117b03ce992cfe ]

The GFS2_RDF_UPTODATE flag in the rgrp is used to determine when
a rgrp buffer is valid. It's cleared when the glock is invalidated,
signifying that the buffer data is now invalid. But before this
patch, function update_rgrp_lvb was setting the flag when it
determined it had a valid lvb. But that's an invalid assumption:
just because you have a valid lvb doesn't mean you have valid
buffers. After all, another node may have made the lvb valid,
and this node just fetched it from the glock via dlm.

Consider this scenario:
1. The file system is mounted with RGRPLVB option.
2. In gfs2_inplace_reserve it locks the rgrp glock EX, but thanks
   to GL_SKIP, it skips the gfs2_rgrp_bh_get.
3. Since loops == 0 and the allocation target (ap->target) is
   bigger than the largest known chunk of blocks in the rgrp
   (rs->rs_rbm.rgd->rd_extfail_pt) it skips that rgrp and bypasses
   the call to gfs2_rgrp_bh_get there as well.
4. update_rgrp_lvb sees the lvb MAGIC number is valid, so bypasses
   gfs2_rgrp_bh_get, but it still sets sets GFS2_RDF_UPTODATE due
   to this invalid assumption.
5. The next time update_rgrp_lvb is called, it sees the bit is set
   and just returns 0, assuming both the lvb and rgrp are both
   uptodate. But since this is a smaller allocation, or space has
   been freed by another node, thus adjusting the lvb values,
   it decides to use the rgrp for allocations, with invalid rd_free
   due to the fact it was never updated.

This patch changes update_rgrp_lvb so it doesn't set the UPTODATE
flag anymore. That way, it has no choice but to fetch the latest
values.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/gfs2/rgrp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c
index 449d0cb45a845..63e5387c84d26 100644
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -1227,7 +1227,7 @@ static int update_rgrp_lvb(struct gfs2_rgrpd *rgd)
 	rl_flags = be32_to_cpu(rgd->rd_rgl->rl_flags);
 	rl_flags &= ~GFS2_RDF_MASK;
 	rgd->rd_flags &= GFS2_RDF_MASK;
-	rgd->rd_flags |= (rl_flags | GFS2_RDF_UPTODATE | GFS2_RDF_CHECK);
+	rgd->rd_flags |= (rl_flags | GFS2_RDF_CHECK);
 	if (rgd->rd_rgl->rl_unlinked == 0)
 		rgd->rd_flags &= ~GFS2_RDF_CHECK;
 	rgd->rd_free = be32_to_cpu(rgd->rd_rgl->rl_free);
-- 
2.20.1

[PATCH AUTOSEL 4.19 033/205] ice: Fix and update driver version string

[Sasha Levin]

From: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>

[ Upstream commit 9ea47d81a7f17c6b77211ab75fbca2127719ad39 ]

Remove the "ice" prefix for the driver version string and bump version
to 0.7.1-k.

Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/ice/ice_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index e1f95e7a51393..00c833cd2b3ae 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -7,7 +7,7 @@
 
 #include "ice.h"
 
-#define DRV_VERSION	"ice-0.7.0-k"
+#define DRV_VERSION	"0.7.1-k"
 #define DRV_SUMMARY	"Intel(R) Ethernet Connection E800 Series Linux Driver"
 const char ice_drv_ver[] = DRV_VERSION;
 static const char ice_driver_string[] = DRV_SUMMARY;
-- 
2.20.1

[PATCH AUTOSEL 4.19 034/205] ASoC: dapm: Don't fail creating new DAPM control on NULL pinctrl

[Sasha Levin]

From: Charles Keepax <ckeepax@opensource.cirrus.com>

[ Upstream commit a5cd7e9cf587f51a84b86c828b4e1c7b392f448e ]

devm_pinctrl_get will only return NULL in the case that pinctrl
is not built into the kernel and all the pinctrl functions used
by the DAPM core are appropriately stubbed for that case. There
is no need to error out of snd_soc_dapm_new_control_unlocked
if pinctrl isn't built into the kernel, so change the
IS_ERR_OR_NULL to just an IS_ERR.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-dapm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 4ce57510b6236..ff31d9f9ecd64 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -3514,7 +3514,7 @@ snd_soc_dapm_new_control_unlocked(struct snd_soc_dapm_context *dapm,
 		break;
 	case snd_soc_dapm_pinctrl:
 		w->pinctrl = devm_pinctrl_get(dapm->dev);
-		if (IS_ERR_OR_NULL(w->pinctrl)) {
+		if (IS_ERR(w->pinctrl)) {
 			ret = PTR_ERR(w->pinctrl);
 			if (ret == -EPROBE_DEFER)
 				return ERR_PTR(ret);
-- 
2.20.1

[PATCH AUTOSEL 4.19 035/205] ASoC: dpcm: Properly initialise hw->rate_max

[Sasha Levin]

From: Charles Keepax <ckeepax@opensource.cirrus.com>

[ Upstream commit e33ffbd9cd39da09831ce62c11025d830bf78d9e ]

If the CPU DAI does not initialise rate_max, say if using
using KNOT or CONTINUOUS, then the rate_max field will be
initialised to 0. A value of zero in the rate_max field of
the hardware runtime will cause the sound card to support no
sample rates at all. Obviously this is not desired, just a
different mechanism is being used to apply the constraints. As
such update the setting of rate_max in dpcm_init_runtime_hw
to be consistent with the non-DPCM cases and set rate_max to
UINT_MAX if nothing is defined on the CPU DAI.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-pcm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c
index 6566c8831a965..551bfc581fc12 100644
--- a/sound/soc/soc-pcm.c
+++ b/sound/soc/soc-pcm.c
@@ -1683,7 +1683,7 @@ static void dpcm_init_runtime_hw(struct snd_pcm_runtime *runtime,
 				 struct snd_soc_pcm_stream *stream)
 {
 	runtime->hw.rate_min = stream->rate_min;
-	runtime->hw.rate_max = stream->rate_max;
+	runtime->hw.rate_max = min_not_zero(stream->rate_max, UINT_MAX);
 	runtime->hw.channels_min = stream->channels_min;
 	runtime->hw.channels_max = stream->channels_max;
 	if (runtime->hw.formats)
-- 
2.20.1

[PATCH AUTOSEL 4.19 036/205] ASoC: meson: axg-fifo: report interrupt request failure

[Sasha Levin]

From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit dadfab7272b13ca441efdb9aa9117bc669680b05 ]

Return value of request_irq() was irgnored. Fix this and report
the failure if any

Fixes: 6dc4fa179fb8 ("ASoC: meson: add axg fifo base driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/meson/axg-fifo.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/soc/meson/axg-fifo.c b/sound/soc/meson/axg-fifo.c
index 30262550e37b1..0e4f65e654c4b 100644
--- a/sound/soc/meson/axg-fifo.c
+++ b/sound/soc/meson/axg-fifo.c
@@ -203,6 +203,8 @@ static int axg_fifo_pcm_open(struct snd_pcm_substream *ss)
 
 	ret = request_irq(fifo->irq, axg_fifo_pcm_irq_block, 0,
 			  dev_name(dev), ss);
+	if (ret)
+		return ret;
 
 	/* Enable pclk to access registers and clock the fifo ip */
 	ret = clk_prepare_enable(fifo->pclk);
-- 
2.20.1

[PATCH AUTOSEL 4.19 036/205] ASoC: meson: axg-fifo: report interrupt request failure

[Sasha Levin]

From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit dadfab7272b13ca441efdb9aa9117bc669680b05 ]

Return value of request_irq() was irgnored. Fix this and report
the failure if any

Fixes: 6dc4fa179fb8 ("ASoC: meson: add axg fifo base driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/meson/axg-fifo.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/soc/meson/axg-fifo.c b/sound/soc/meson/axg-fifo.c
index 30262550e37b1..0e4f65e654c4b 100644
--- a/sound/soc/meson/axg-fifo.c
+++ b/sound/soc/meson/axg-fifo.c
@@ -203,6 +203,8 @@ static int axg_fifo_pcm_open(struct snd_pcm_substream *ss)
 
 	ret = request_irq(fifo->irq, axg_fifo_pcm_irq_block, 0,
 			  dev_name(dev), ss);
+	if (ret)
+		return ret;
 
 	/* Enable pclk to access registers and clock the fifo ip */
 	ret = clk_prepare_enable(fifo->pclk);
-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH AUTOSEL 4.19 037/205] ASoC: AMD: Change MCLK to 48Mhz

[Sasha Levin]

From: Akshu Agrawal <akshu.agrawal@amd.com>

[ Upstream commit a1b1e9880f0c2754a5ac416a546d9f295f72eabc ]

25Mhz MCLK which was earlier used was of spread type.
Thus, we were not getting accurate rate. The 48Mhz system
clk is of non-spread type and we are changing to it to get
accurate rate.

Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/amd/acp-da7219-max98357a.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/amd/acp-da7219-max98357a.c b/sound/soc/amd/acp-da7219-max98357a.c
index 8e3275a96a821..e53b54d77692e 100644
--- a/sound/soc/amd/acp-da7219-max98357a.c
+++ b/sound/soc/amd/acp-da7219-max98357a.c
@@ -42,7 +42,7 @@
 #include "../codecs/da7219.h"
 #include "../codecs/da7219-aad.h"
 
-#define CZ_PLAT_CLK 25000000
+#define CZ_PLAT_CLK 48000000
 #define DUAL_CHANNEL		2
 
 static struct snd_soc_jack cz_jack;
-- 
2.20.1

[PATCH AUTOSEL 4.19 038/205] pinctrl: ingenic: Probe driver at subsys_initcall

[Sasha Levin]

From: Paul Cercueil <paul@crapouillou.net>

[ Upstream commit 556a36a71ed80e17ade49225b58513ea3c9e4558 ]

Using postcore_initcall() makes the driver try to initialize way too
early.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/pinctrl-ingenic.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pinctrl/pinctrl-ingenic.c b/drivers/pinctrl/pinctrl-ingenic.c
index 628817c40e3bb..a5accffbc8c91 100644
--- a/drivers/pinctrl/pinctrl-ingenic.c
+++ b/drivers/pinctrl/pinctrl-ingenic.c
@@ -847,4 +847,4 @@ static int __init ingenic_pinctrl_drv_register(void)
 {
 	return platform_driver_register(&ingenic_pinctrl_driver);
 }
-postcore_initcall(ingenic_pinctrl_drv_register);
+subsys_initcall(ingenic_pinctrl_drv_register);
-- 
2.20.1

[PATCH AUTOSEL 4.19 039/205] MIPS: BCM47XX: Enable USB power on Netgear WNDR3400v3

[Sasha Levin]

From: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>

[ Upstream commit feef7918667b84f9d5653c501542dd8d84ae32af ]

Setting GPIO 21 high seems to be required to enable power to USB ports
on the WNDR3400v3. As there is already similar code for WNR3500L,
make the existing USB power GPIO code generic and use that.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20259/
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/bcm47xx/workarounds.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/mips/bcm47xx/workarounds.c b/arch/mips/bcm47xx/workarounds.c
index 1a8a07e7a5633..46eddbec8d9fd 100644
--- a/arch/mips/bcm47xx/workarounds.c
+++ b/arch/mips/bcm47xx/workarounds.c
@@ -5,9 +5,8 @@
 #include <bcm47xx_board.h>
 #include <bcm47xx.h>
 
-static void __init bcm47xx_workarounds_netgear_wnr3500l(void)
+static void __init bcm47xx_workarounds_enable_usb_power(int usb_power)
 {
-	const int usb_power = 12;
 	int err;
 
 	err = gpio_request_one(usb_power, GPIOF_OUT_INIT_HIGH, "usb_power");
@@ -23,7 +22,10 @@ void __init bcm47xx_workarounds(void)
 
 	switch (board) {
 	case BCM47XX_BOARD_NETGEAR_WNR3500L:
-		bcm47xx_workarounds_netgear_wnr3500l();
+		bcm47xx_workarounds_enable_usb_power(12);
+		break;
+	case BCM47XX_BOARD_NETGEAR_WNDR3400_V3:
+		bcm47xx_workarounds_enable_usb_power(21);
 		break;
 	default:
 		/* No workaround(s) needed */
-- 
2.20.1

[PATCH AUTOSEL 4.19 040/205] ARM: dts: exynos: Use i2c-gpio for HDMI-DDC on Arndale

[Sasha Levin]

From: Andrzej Hajda <a.hajda@samsung.com>

[ Upstream commit 620375c8fdf2f9f5110ed48d6c407cc4b7554f86 ]

HDMI-DDC for unknown reasons doesn't work with Exynos I2C controllers.
Fortunately i2c-gpio comes to the rescue.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/exynos5250-arndale.dts  | 28 ++++++++++++++++-------
 arch/arm/boot/dts/exynos5250-pinctrl.dtsi |  6 +++++
 2 files changed, 26 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 7a8a5c55701a8..bb3fcd652b5d7 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -150,7 +150,7 @@
 
 &hdmi {
 	status = "okay";
-	ddc = <&i2c_2>;
+	ddc = <&i2c_ddc>;
 	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_LOW>;
 	vdd_osc-supply = <&ldo10_reg>;
 	vdd_pll-supply = <&ldo8_reg>;
@@ -452,13 +452,6 @@
 	};
 };
 
-&i2c_2 {
-	status = "okay";
-	/* used by HDMI DDC */
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-};
-
 &i2c_3 {
 	status = "okay";
 
@@ -547,3 +540,22 @@
 	status = "okay";
 	samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
 };
+
+&soc {
+	/*
+	 * For unknown reasons HDMI-DDC does not work with Exynos I2C
+	 * controllers. Lets use software I2C over GPIO pins as a workaround.
+	 */
+	i2c_ddc: i2c-gpio {
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_gpio_bus>;
+		status = "okay";
+		compatible = "i2c-gpio";
+		gpios = <&gpa0 6 0 /* sda */
+			 &gpa0 7 0 /* scl */
+			>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
index 6ff6dea29d449..b25d520393b8b 100644
--- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
@@ -225,6 +225,12 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
+	i2c2_gpio_bus: i2c2-gpio-bus {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
 	uart2_data: uart2-data {
 		samsung,pins = "gpa1-0", "gpa1-1";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 041/205] ARM: dts: exynos: Fix HDMI-HPD line handling on Arndale

[Sasha Levin]

From: Andrzej Hajda <a.hajda@samsung.com>

[ Upstream commit 21cb5a27483a3cfdbcb7508a06a30c0a485e1211 ]

HDMI-HPD was set active low, moreover by default pincontrol chip sets
pull-down on the pin. As a result HDMI driver assumes TV is always
connected regardless of actual state.  The patch fixes it.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/exynos5250-arndale.dts  | 4 +++-
 arch/arm/boot/dts/exynos5250-pinctrl.dtsi | 5 +++++
 2 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index bb3fcd652b5d7..9c8ab4b7fb2cf 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -149,9 +149,11 @@
 };
 
 &hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd>;
 	status = "okay";
 	ddc = <&i2c_ddc>;
-	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_LOW>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	vdd_osc-supply = <&ldo10_reg>;
 	vdd_pll-supply = <&ldo8_reg>;
 	vdd-supply = <&ldo8_reg>;
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
index b25d520393b8b..d31a68672bfac 100644
--- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
@@ -599,6 +599,11 @@
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
+
+	hdmi_hpd: hdmi-hpd {
+		samsung,pins = "gpx3-7";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
 };
 
 &pinctrl_1 {
-- 
2.20.1

[PATCH AUTOSEL 4.19 042/205] ARM: dts: exynos: Fix sound in Snow-rev5 Chromebook

[Sasha Levin]

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit 64858773d78e820003a94e5a7179d368213655d6 ]

This patch adds missing properties to the CODEC and sound nodes, so the
audio will work also on Snow rev5 Chromebook. This patch is an extension
to the commit e9eefc3f8ce0 ("ARM: dts: exynos: Add missing clock and
DAI properties to the max98095 node in Snow Chromebook")
and commit 6ab569936d60 ("ARM: dts: exynos: Enable HDMI audio on Snow
Chromebook").  It has been reported that such changes work fine on the
rev5 board too.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
[krzk: Fixed typo in phandle to &max98090]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/exynos5250-snow-rev5.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5250-snow-rev5.dts b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
index 0348b1c49a691..7cbfc6f1f4b8f 100644
--- a/arch/arm/boot/dts/exynos5250-snow-rev5.dts
+++ b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
@@ -20,6 +20,14 @@
 
 		samsung,model = "Snow-I2S-MAX98090";
 		samsung,audio-codec = <&max98090>;
+
+		cpu {
+			sound-dai = <&i2s0 0>;
+		};
+
+		codec {
+			sound-dai = <&max98090 0>, <&hdmi>;
+		};
 	};
 };
 
@@ -31,6 +39,9 @@
 		interrupt-parent = <&gpx0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max98090_irq>;
+		clocks = <&pmu_system_controller 0>;
+		clock-names = "mclk";
+		#sound-dai-cells = <1>;
 	};
 };
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 043/205] liquidio: fix race condition in instruction completion processing

[Sasha Levin]

From: Rick Farrington <ricardo.farrington@cavium.com>

[ Upstream commit b943f17e06493fd2c7fd00743093ad5dcdb90e7f ]

In lio_enable_irq, the pkt_in_done count register was being cleared to
zero.  However, there could be some completed instructions which were not
yet processed due to budget and limit constraints.
So, only write this register with the number of actual completions
that were processed.

Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/cavium/liquidio/octeon_device.c   | 5 +++--
 drivers/net/ethernet/cavium/liquidio/octeon_iq.h       | 2 ++
 drivers/net/ethernet/cavium/liquidio/request_manager.c | 2 ++
 3 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/cavium/liquidio/octeon_device.c b/drivers/net/ethernet/cavium/liquidio/octeon_device.c
index f878a552fef3b..d0ed6c4f9e1a2 100644
--- a/drivers/net/ethernet/cavium/liquidio/octeon_device.c
+++ b/drivers/net/ethernet/cavium/liquidio/octeon_device.c
@@ -1450,8 +1450,9 @@ void lio_enable_irq(struct octeon_droq *droq, struct octeon_instr_queue *iq)
 	}
 	if (iq) {
 		spin_lock_bh(&iq->lock);
-		writel(iq->pkt_in_done, iq->inst_cnt_reg);
-		iq->pkt_in_done = 0;
+		writel(iq->pkts_processed, iq->inst_cnt_reg);
+		iq->pkt_in_done -= iq->pkts_processed;
+		iq->pkts_processed = 0;
 		/* this write needs to be flushed before we release the lock */
 		mmiowb();
 		spin_unlock_bh(&iq->lock);
diff --git a/drivers/net/ethernet/cavium/liquidio/octeon_iq.h b/drivers/net/ethernet/cavium/liquidio/octeon_iq.h
index 2327062e8af6b..aecd0d36d6349 100644
--- a/drivers/net/ethernet/cavium/liquidio/octeon_iq.h
+++ b/drivers/net/ethernet/cavium/liquidio/octeon_iq.h
@@ -94,6 +94,8 @@ struct octeon_instr_queue {
 
 	u32 pkt_in_done;
 
+	u32 pkts_processed;
+
 	/** A spinlock to protect access to the input ring.*/
 	spinlock_t iq_flush_running_lock;
 
diff --git a/drivers/net/ethernet/cavium/liquidio/request_manager.c b/drivers/net/ethernet/cavium/liquidio/request_manager.c
index 3deb3c07681fd..1d9ab7f4a2fef 100644
--- a/drivers/net/ethernet/cavium/liquidio/request_manager.c
+++ b/drivers/net/ethernet/cavium/liquidio/request_manager.c
@@ -123,6 +123,7 @@ int octeon_init_instr_queue(struct octeon_device *oct,
 	iq->do_auto_flush = 1;
 	iq->db_timeout = (u32)conf->db_timeout;
 	atomic_set(&iq->instr_pending, 0);
+	iq->pkts_processed = 0;
 
 	/* Initialize the spinlock for this instruction queue */
 	spin_lock_init(&iq->lock);
@@ -497,6 +498,7 @@ octeon_flush_iq(struct octeon_device *oct, struct octeon_instr_queue *iq,
 				lio_process_iq_request_list(oct, iq, 0);
 
 		if (inst_processed) {
+			iq->pkts_processed += inst_processed;
 			atomic_sub(inst_processed, &iq->instr_pending);
 			iq->stats.instr_processed += inst_processed;
 		}
-- 
2.20.1

[PATCH AUTOSEL 4.19 044/205] arm64: dts: stratix10: i2c clock running out of spec

[Sasha Levin]

From: Alan Tull <atull@kernel.org>

[ Upstream commit c8da1d15b8a4957f105ad77bb1404d72e304566f ]

DesignWare I2C controller was observed running at 105.93kHz rather
than the specified 100kHz.  Adjust device tree settings to bring it
within spec (a slightly conservative 98 MHz).

Signed-off-by: Alan Tull <atull@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
index 7c661753bfaf4..faa017d4cd56b 100644
--- a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
+++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
@@ -124,6 +124,8 @@
 &i2c1 {
 	status = "okay";
 	clock-frequency = <100000>;
+	i2c-sda-falling-time-ns = <890>;  /* hcnt */
+	i2c-sdl-falling-time-ns = <890>;  /* lcnt */
 
 	adc@14 {
 		compatible = "lltc,ltc2497";
-- 
2.20.1

[PATCH AUTOSEL 4.19 045/205] ARM: dts: exynos: Fix regulators configuration on Peach Pi/Pit Chromebooks

[Sasha Levin]

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit f8f3b7fc21b1cb59385b780acd9b9a26d04cb7b2 ]

Regulators, which are marked as 'on-in-suspend' seems to be critical for
board operation, thus they must not be disabled anytime. This can be
only assured by marking them as 'always-on', because otherwise some
actions of their clients might result in turning them off. This patch
restores suspend/resume operation on Peach-Pit Chromebook board. It
partially reverts 'always-on' property removal done by the commit
mentioned in the Fixes tag.

Fixes: 665c441eea3d ("ARM: dts: exynos: Remove unneded always-on for regulators on Peach boards")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/exynos5420-peach-pit.dts | 3 +++
 arch/arm/boot/dts/exynos5800-peach-pi.dts  | 3 +++
 2 files changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 25bdc9d97a4df..769d60d6c9006 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -312,6 +312,7 @@
 				regulator-name = "vdd_1v35";
 				regulator-min-microvolt = <1350000>;
 				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
@@ -333,6 +334,7 @@
 				regulator-name = "vdd_2v";
 				regulator-min-microvolt = <2000000>;
 				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
@@ -343,6 +345,7 @@
 				regulator-name = "vdd_1v8";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 7989631b39ccf..492e2cd2e559e 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -312,6 +312,7 @@
 				regulator-name = "vdd_1v35";
 				regulator-min-microvolt = <1350000>;
 				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
@@ -333,6 +334,7 @@
 				regulator-name = "vdd_2v";
 				regulator-min-microvolt = <2000000>;
 				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
@@ -343,6 +345,7 @@
 				regulator-name = "vdd_1v8";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
-- 
2.20.1

[PATCH AUTOSEL 4.19 046/205] i40evf: Validate the number of queues a PF sends

[Sasha Levin]

From: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>

[ Upstream commit 3c818910911c93bb5099c6637ec350f90c0e71fc ]

A PF can send any number of queues to the VF and the VF may not
be able to support that many. Check to see that the number of
queues is less than or equal to the max number of queues the
VF can have.

Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../ethernet/intel/i40evf/i40evf_virtchnl.c   | 32 +++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c b/drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c
index 565677de5ba37..94dabc9d89f73 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c
@@ -153,6 +153,32 @@ int i40evf_send_vf_config_msg(struct i40evf_adapter *adapter)
 					  NULL, 0);
 }
 
+/**
+ * i40evf_validate_num_queues
+ * @adapter: adapter structure
+ *
+ * Validate that the number of queues the PF has sent in
+ * VIRTCHNL_OP_GET_VF_RESOURCES is not larger than the VF can handle.
+ **/
+static void i40evf_validate_num_queues(struct i40evf_adapter *adapter)
+{
+	if (adapter->vf_res->num_queue_pairs > I40EVF_MAX_REQ_QUEUES) {
+		struct virtchnl_vsi_resource *vsi_res;
+		int i;
+
+		dev_info(&adapter->pdev->dev, "Received %d queues, but can only have a max of %d\n",
+			 adapter->vf_res->num_queue_pairs,
+			 I40EVF_MAX_REQ_QUEUES);
+		dev_info(&adapter->pdev->dev, "Fixing by reducing queues to %d\n",
+			 I40EVF_MAX_REQ_QUEUES);
+		adapter->vf_res->num_queue_pairs = I40EVF_MAX_REQ_QUEUES;
+		for (i = 0; i < adapter->vf_res->num_vsis; i++) {
+			vsi_res = &adapter->vf_res->vsi_res[i];
+			vsi_res->num_queue_pairs = I40EVF_MAX_REQ_QUEUES;
+		}
+	}
+}
+
 /**
  * i40evf_get_vf_config
  * @adapter: private adapter structure
@@ -195,6 +221,11 @@ int i40evf_get_vf_config(struct i40evf_adapter *adapter)
 	err = (i40e_status)le32_to_cpu(event.desc.cookie_low);
 	memcpy(adapter->vf_res, event.msg_buf, min(event.msg_len, len));
 
+	/* some PFs send more queues than we should have so validate that
+	 * we aren't getting too many queues
+	 */
+	if (!err)
+		i40evf_validate_num_queues(adapter);
 	i40e_vf_parse_hw_config(hw, adapter->vf_res);
 out_alloc:
 	kfree(event.msg_buf);
@@ -1329,6 +1360,7 @@ void i40evf_virtchnl_completion(struct i40evf_adapter *adapter,
 			  I40E_MAX_VF_VSI *
 			  sizeof(struct virtchnl_vsi_resource);
 		memcpy(adapter->vf_res, msg, min(msglen, len));
+		i40evf_validate_num_queues(adapter);
 		i40e_vf_parse_hw_config(&adapter->hw, adapter->vf_res);
 		/* restore current mac address */
 		ether_addr_copy(adapter->hw.mac.addr, netdev->dev_addr);
-- 
2.20.1

[PATCH AUTOSEL 4.19 047/205] i40e: use correct length for strncpy

[Sasha Levin]

From: Mitch Williams <mitch.a.williams@intel.com>

[ Upstream commit 7eb74ff891b4e94b8bac48f648a21e4b94ddee64 ]

Caught by GCC 8. When we provide a length for strncpy, we should not
include the terminating null. So we must tell it one less than the size
of the destination buffer.

Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/i40e/i40e_ptp.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_ptp.c b/drivers/net/ethernet/intel/i40e/i40e_ptp.c
index 35f2866b38c6b..1199f0502d6d5 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ptp.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ptp.c
@@ -694,7 +694,8 @@ static long i40e_ptp_create_clock(struct i40e_pf *pf)
 	if (!IS_ERR_OR_NULL(pf->ptp_clock))
 		return 0;
 
-	strncpy(pf->ptp_caps.name, i40e_driver_name, sizeof(pf->ptp_caps.name));
+	strncpy(pf->ptp_caps.name, i40e_driver_name,
+		sizeof(pf->ptp_caps.name) - 1);
 	pf->ptp_caps.owner = THIS_MODULE;
 	pf->ptp_caps.max_adj = 999999999;
 	pf->ptp_caps.n_ext_ts = 0;
-- 
2.20.1

[PATCH AUTOSEL 4.19 048/205] i40evf: set IFF_UNICAST_FLT flag for the VF

[Sasha Levin]

From: Lihong Yang <lihong.yang@intel.com>

[ Upstream commit e65aae086330d0a6c6c9f874aef03c69cf98884b ]

Set IFF_UNICAST_FLT flag for the VF to prevent it from entering
promiscuous mode when macvlan is added to the VF.

Signed-off-by: Lihong Yang <lihong.yang@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/i40evf/i40evf_main.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index fef6d892ed4cf..bc4fa9df6da3e 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -3332,6 +3332,8 @@ int i40evf_process_config(struct i40evf_adapter *adapter)
 	if (vfres->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_VLAN)
 		netdev->features |= NETIF_F_HW_VLAN_CTAG_FILTER;
 
+	netdev->priv_flags |= IFF_UNICAST_FLT;
+
 	/* Do not turn on offloads when they are requested to be turned off.
 	 * TSO needs minimum 576 bytes to work correctly.
 	 */
-- 
2.20.1

[PATCH AUTOSEL 4.19 049/205] i40e: Check and correct speed values for link on open

[Sasha Levin]

From: Jan Sokolowski <jan.sokolowski@intel.com>

[ Upstream commit e78d9a39fd06109022d11c8ca444cfcec2abb290 ]

If our card has been put in an unstable state due to
other drivers interacting with it, speed settings
might be incorrect. If incorrect, forcefully reset them
on open to known default values.

Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 27 ++++++++++++++++++---
 1 file changed, 24 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 055562c930fb0..1577dbaab7425 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -6587,6 +6587,24 @@ static i40e_status i40e_force_link_state(struct i40e_pf *pf, bool is_up)
 	struct i40e_hw *hw = &pf->hw;
 	i40e_status err;
 	u64 mask;
+	u8 speed;
+
+	/* Card might've been put in an unstable state by other drivers
+	 * and applications, which causes incorrect speed values being
+	 * set on startup. In order to clear speed registers, we call
+	 * get_phy_capabilities twice, once to get initial state of
+	 * available speeds, and once to get current PHY config.
+	 */
+	err = i40e_aq_get_phy_capabilities(hw, false, true, &abilities,
+					   NULL);
+	if (err) {
+		dev_err(&pf->pdev->dev,
+			"failed to get phy cap., ret =  %s last_status =  %s\n",
+			i40e_stat_str(hw, err),
+			i40e_aq_str(hw, hw->aq.asq_last_status));
+		return err;
+	}
+	speed = abilities.link_speed;
 
 	/* Get the current phy config */
 	err = i40e_aq_get_phy_capabilities(hw, false, false, &abilities,
@@ -6600,9 +6618,9 @@ static i40e_status i40e_force_link_state(struct i40e_pf *pf, bool is_up)
 	}
 
 	/* If link needs to go up, but was not forced to go down,
-	 * no need for a flap
+	 * and its speed values are OK, no need for a flap
 	 */
-	if (is_up && abilities.phy_type != 0)
+	if (is_up && abilities.phy_type != 0 && abilities.link_speed != 0)
 		return I40E_SUCCESS;
 
 	/* To force link we need to set bits for all supported PHY types,
@@ -6614,7 +6632,10 @@ static i40e_status i40e_force_link_state(struct i40e_pf *pf, bool is_up)
 	config.phy_type_ext = is_up ? (u8)((mask >> 32) & 0xff) : 0;
 	/* Copy the old settings, except of phy_type */
 	config.abilities = abilities.abilities;
-	config.link_speed = abilities.link_speed;
+	if (abilities.link_speed != 0)
+		config.link_speed = abilities.link_speed;
+	else
+		config.link_speed = speed;
 	config.eee_capability = abilities.eee_capability;
 	config.eeer = abilities.eeer_val;
 	config.low_power_ctrl = abilities.d3_lpan;
-- 
2.20.1

[PATCH AUTOSEL 4.19 050/205] i40evf: Don't enable vlan stripping when rx offload is turned on

[Sasha Levin]

From: Patryk Małek <patryk.malek@intel.com>

[ Upstream commit 3bd77e2ae1477d6f87fc3f542c737119d5decf9f ]

With current implementation of i40evf_set_features when user sets
any offload via ethtool we set I40EVF_FLAG_AQ_ENABLE_VLAN_STRIPPING
as a required aq which triggers driver to call
i40evf_enable_vlan_stripping. This shouldn't take place.
This patches fixes it by setting the flag only when VLAN offload
is turned on.

Signed-off-by: Patryk Małek <patryk.malek@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/i40evf/i40evf_main.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index bc4fa9df6da3e..3fc46d2adc087 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -3097,18 +3097,19 @@ static int i40evf_set_features(struct net_device *netdev,
 {
 	struct i40evf_adapter *adapter = netdev_priv(netdev);
 
-	/* Don't allow changing VLAN_RX flag when VLAN is set for VF
-	 * and return an error in this case
+	/* Don't allow changing VLAN_RX flag when adapter is not capable
+	 * of VLAN offload
 	 */
-	if (VLAN_ALLOWED(adapter)) {
+	if (!VLAN_ALLOWED(adapter)) {
+		if ((netdev->features ^ features) & NETIF_F_HW_VLAN_CTAG_RX)
+			return -EINVAL;
+	} else if ((netdev->features ^ features) & NETIF_F_HW_VLAN_CTAG_RX) {
 		if (features & NETIF_F_HW_VLAN_CTAG_RX)
 			adapter->aq_required |=
 				I40EVF_FLAG_AQ_ENABLE_VLAN_STRIPPING;
 		else
 			adapter->aq_required |=
 				I40EVF_FLAG_AQ_DISABLE_VLAN_STRIPPING;
-	} else if ((netdev->features ^ features) & NETIF_F_HW_VLAN_CTAG_RX) {
-		return -EINVAL;
 	}
 
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 4.19 051/205] i40e: hold the rtnl lock on clearing interrupt scheme

[Sasha Levin]

From: Patryk Małek <patryk.malek@intel.com>

[ Upstream commit 5cba17b14182696d6bb0ec83a1d087933f252241 ]

Hold the rtnl lock when we're clearing interrupt scheme
in i40e_shutdown and in i40e_remove.

Signed-off-by: Patryk Małek <patryk.malek@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 1577dbaab7425..1a66373184d62 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -14208,6 +14208,7 @@ static void i40e_remove(struct pci_dev *pdev)
 	mutex_destroy(&hw->aq.asq_mutex);
 
 	/* Clear all dynamic memory lists of rings, q_vectors, and VSIs */
+	rtnl_lock();
 	i40e_clear_interrupt_scheme(pf);
 	for (i = 0; i < pf->num_alloc_vsi; i++) {
 		if (pf->vsi[i]) {
@@ -14216,6 +14217,7 @@ static void i40e_remove(struct pci_dev *pdev)
 			pf->vsi[i] = NULL;
 		}
 	}
+	rtnl_unlock();
 
 	for (i = 0; i < I40E_MAX_VEB; i++) {
 		kfree(pf->veb[i]);
@@ -14427,7 +14429,13 @@ static void i40e_shutdown(struct pci_dev *pdev)
 	wr32(hw, I40E_PFPM_WUFC,
 	     (pf->wol_en ? I40E_PFPM_WUFC_MAG_MASK : 0));
 
+	/* Since we're going to destroy queues during the
+	 * i40e_clear_interrupt_scheme() we should hold the RTNL lock for this
+	 * whole section
+	 */
+	rtnl_lock();
 	i40e_clear_interrupt_scheme(pf);
+	rtnl_unlock();
 
 	if (system_state == SYSTEM_POWER_OFF) {
 		pci_wake_from_d3(pdev, pf->wol_en);
-- 
2.20.1

[PATCH AUTOSEL 4.19 052/205] i40evf: cancel workqueue sync for adminq when a VF is removed

[Sasha Levin]

From: Lihong Yang <lihong.yang@intel.com>

[ Upstream commit babbcc60040abfb7a9e3caa1c58fe182ae73762a ]

If a VF is being removed, there is no need to continue with the
workqueue sync for the adminq task, thus cancel it. Without this call,
when VFs are created and removed right away, there might be a chance for
the driver to crash with events stuck in the adminq.

Signed-off-by: Lihong Yang <lihong.yang@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/i40evf/i40evf_main.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index 3fc46d2adc087..f50c19b833686 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -3884,6 +3884,8 @@ static void i40evf_remove(struct pci_dev *pdev)
 	if (adapter->watchdog_timer.function)
 		del_timer_sync(&adapter->watchdog_timer);
 
+	cancel_work_sync(&adapter->adminq_task);
+
 	i40evf_free_rss(adapter);
 
 	if (hw->aq.asq.count)
-- 
2.20.1

[PATCH AUTOSEL 4.19 053/205] i40e: Prevent deleting MAC address from VF when set by PF

[Sasha Levin]

From: Patryk Małek <patryk.malek@intel.com>

[ Upstream commit 5907cf6c5bbe78be2ed18b875b316c6028b20634 ]

To prevent VF from deleting MAC address that was assigned by the
PF we need to check for that scenario when we try to delete a MAC
address from a VF.

Signed-off-by: Patryk Małek <patryk.malek@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index d86f3fa7aa6a4..46a71d289bca2 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -2571,6 +2571,16 @@ static int i40e_vc_del_mac_addr_msg(struct i40e_vf *vf, u8 *msg, u16 msglen)
 			ret = I40E_ERR_INVALID_MAC_ADDR;
 			goto error_param;
 		}
+
+		if (vf->pf_set_mac &&
+		    ether_addr_equal(al->list[i].addr,
+				     vf->default_lan_addr.addr)) {
+			dev_err(&pf->pdev->dev,
+				"MAC addr %pM has been set by PF, cannot delete it for VF %d, reset VF to change MAC addr\n",
+				vf->default_lan_addr.addr, vf->vf_id);
+			ret = I40E_ERR_PARAM;
+			goto error_param;
+		}
 	}
 	vsi = pf->vsi[vf->lan_vsi_idx];
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 054/205] IB/rxe: avoid back-to-back retries

[Sasha Levin]

From: Vijay Immanuel <vijayi@attalasystems.com>

[ Upstream commit 4e4c53df567714b3d08b2b5d8ccb1d175fc9be01 ]

Error retries can occur due to timeouts, NAKs or receiving
packets beyond the current read request. Avoid back-to-back
retries due to packet processing, by only retrying the initial
attempt immediately. Subsequent retries must be due to timeouts.

Continue to process completion packets after scheduling a retry.

Signed-off-by: Vijay Immanuel <vijayi@attalasystems.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/sw/rxe/rxe_comp.c  | 18 +++++++++++++++++-
 drivers/infiniband/sw/rxe/rxe_verbs.h |  1 +
 2 files changed, 18 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/sw/rxe/rxe_comp.c b/drivers/infiniband/sw/rxe/rxe_comp.c
index 83311dd07019b..ed96441595d81 100644
--- a/drivers/infiniband/sw/rxe/rxe_comp.c
+++ b/drivers/infiniband/sw/rxe/rxe_comp.c
@@ -191,6 +191,7 @@ static inline void reset_retry_counters(struct rxe_qp *qp)
 {
 	qp->comp.retry_cnt = qp->attr.retry_cnt;
 	qp->comp.rnr_retry = qp->attr.rnr_retry;
+	qp->comp.started_retry = 0;
 }
 
 static inline enum comp_state check_psn(struct rxe_qp *qp,
@@ -676,6 +677,20 @@ int rxe_completer(void *arg)
 				goto exit;
 			}
 
+			/* if we've started a retry, don't start another
+			 * retry sequence, unless this is a timeout.
+			 */
+			if (qp->comp.started_retry &&
+			    !qp->comp.timeout_retry) {
+				if (pkt) {
+					rxe_drop_ref(pkt->qp);
+					kfree_skb(skb);
+					skb = NULL;
+				}
+
+				goto done;
+			}
+
 			if (qp->comp.retry_cnt > 0) {
 				if (qp->comp.retry_cnt != 7)
 					qp->comp.retry_cnt--;
@@ -692,6 +707,7 @@ int rxe_completer(void *arg)
 					rxe_counter_inc(rxe,
 							RXE_CNT_COMP_RETRY);
 					qp->req.need_retry = 1;
+					qp->comp.started_retry = 1;
 					rxe_run_task(&qp->req.task, 1);
 				}
 
@@ -701,7 +717,7 @@ int rxe_completer(void *arg)
 					skb = NULL;
 				}
 
-				goto exit;
+				goto done;
 
 			} else {
 				rxe_counter_inc(rxe, RXE_CNT_RETRY_EXCEEDED);
diff --git a/drivers/infiniband/sw/rxe/rxe_verbs.h b/drivers/infiniband/sw/rxe/rxe_verbs.h
index 3b731c7682e5b..a0ec28d2b71a4 100644
--- a/drivers/infiniband/sw/rxe/rxe_verbs.h
+++ b/drivers/infiniband/sw/rxe/rxe_verbs.h
@@ -158,6 +158,7 @@ struct rxe_comp_info {
 	int			opcode;
 	int			timeout;
 	int			timeout_retry;
+	int			started_retry;
 	u32			retry_cnt;
 	u32			rnr_retry;
 	struct rxe_task		task;
-- 
2.20.1

[PATCH AUTOSEL 4.19 055/205] IB/rxe: fixes for rdma read retry

[Sasha Levin]

From: Vijay Immanuel <vijayi@attalasystems.com>

[ Upstream commit 030e46e495af855a13964a0aab9753ea82a96edc ]

When a read request is retried for the remaining partial
data, the response may restart from read response first
or read response only. So support those cases.

Do not advance the comp psn beyond the current wqe's last_psn
as that could skip over an entire read wqe and will cause the
req_retry() logic to set an incorrect req psn.
An example sequence is as follows:
Write        PSN 40 -- this is the current WQE.
Read request PSN 41
Write        PSN 42
Receive ACK  PSN 42 -- this will complete the current WQE
for PSN 40, and set the comp psn to 42 which is a problem
because the read request at PSN 41 has been skipped over.
So when req_retry() tries to retransmit the read request,
it sets the req psn to 42 which is incorrect.

When retrying a read request, calculate the number of psns
completed based on the dma resid instead of the wqe first_psn.
The wqe first_psn could have moved if the read request was
retried multiple times.

Set the reth length to the dma resid to handle read retries for
the remaining partial data.

Signed-off-by: Vijay Immanuel <vijayi@attalasystems.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/sw/rxe/rxe_comp.c | 21 ++++++++++++++++-----
 drivers/infiniband/sw/rxe/rxe_req.c  | 15 +++++++++------
 2 files changed, 25 insertions(+), 11 deletions(-)

diff --git a/drivers/infiniband/sw/rxe/rxe_comp.c b/drivers/infiniband/sw/rxe/rxe_comp.c
index ed96441595d81..ea089cb091ade 100644
--- a/drivers/infiniband/sw/rxe/rxe_comp.c
+++ b/drivers/infiniband/sw/rxe/rxe_comp.c
@@ -254,6 +254,17 @@ static inline enum comp_state check_ack(struct rxe_qp *qp,
 	case IB_OPCODE_RC_RDMA_READ_RESPONSE_MIDDLE:
 		if (pkt->opcode != IB_OPCODE_RC_RDMA_READ_RESPONSE_MIDDLE &&
 		    pkt->opcode != IB_OPCODE_RC_RDMA_READ_RESPONSE_LAST) {
+			/* read retries of partial data may restart from
+			 * read response first or response only.
+			 */
+			if ((pkt->psn == wqe->first_psn &&
+			     pkt->opcode ==
+			     IB_OPCODE_RC_RDMA_READ_RESPONSE_FIRST) ||
+			    (wqe->first_psn == wqe->last_psn &&
+			     pkt->opcode ==
+			     IB_OPCODE_RC_RDMA_READ_RESPONSE_ONLY))
+				break;
+
 			return COMPST_ERROR;
 		}
 		break;
@@ -500,11 +511,11 @@ static inline enum comp_state complete_wqe(struct rxe_qp *qp,
 					   struct rxe_pkt_info *pkt,
 					   struct rxe_send_wqe *wqe)
 {
-	qp->comp.opcode = -1;
-
-	if (pkt) {
-		if (psn_compare(pkt->psn, qp->comp.psn) >= 0)
-			qp->comp.psn = (pkt->psn + 1) & BTH_PSN_MASK;
+	if (pkt && wqe->state == wqe_state_pending) {
+		if (psn_compare(wqe->last_psn, qp->comp.psn) >= 0) {
+			qp->comp.psn = (wqe->last_psn + 1) & BTH_PSN_MASK;
+			qp->comp.opcode = -1;
+		}
 
 		if (qp->req.wait_psn) {
 			qp->req.wait_psn = 0;
diff --git a/drivers/infiniband/sw/rxe/rxe_req.c b/drivers/infiniband/sw/rxe/rxe_req.c
index fa98a52796470..f7dd8de799415 100644
--- a/drivers/infiniband/sw/rxe/rxe_req.c
+++ b/drivers/infiniband/sw/rxe/rxe_req.c
@@ -73,9 +73,6 @@ static void req_retry(struct rxe_qp *qp)
 	int npsn;
 	int first = 1;
 
-	wqe = queue_head(qp->sq.queue);
-	npsn = (qp->comp.psn - wqe->first_psn) & BTH_PSN_MASK;
-
 	qp->req.wqe_index	= consumer_index(qp->sq.queue);
 	qp->req.psn		= qp->comp.psn;
 	qp->req.opcode		= -1;
@@ -107,11 +104,17 @@ static void req_retry(struct rxe_qp *qp)
 		if (first) {
 			first = 0;
 
-			if (mask & WR_WRITE_OR_SEND_MASK)
+			if (mask & WR_WRITE_OR_SEND_MASK) {
+				npsn = (qp->comp.psn - wqe->first_psn) &
+					BTH_PSN_MASK;
 				retry_first_write_send(qp, wqe, mask, npsn);
+			}
 
-			if (mask & WR_READ_MASK)
+			if (mask & WR_READ_MASK) {
+				npsn = (wqe->dma.length - wqe->dma.resid) /
+					qp->mtu;
 				wqe->iova += npsn * qp->mtu;
+			}
 		}
 
 		wqe->state = wqe_state_posted;
@@ -435,7 +438,7 @@ static struct sk_buff *init_req_packet(struct rxe_qp *qp,
 	if (pkt->mask & RXE_RETH_MASK) {
 		reth_set_rkey(pkt, ibwr->wr.rdma.rkey);
 		reth_set_va(pkt, wqe->iova);
-		reth_set_len(pkt, wqe->dma.length);
+		reth_set_len(pkt, wqe->dma.resid);
 	}
 
 	if (pkt->mask & RXE_IMMDT_MASK)
-- 
2.20.1

[PATCH AUTOSEL 4.19 056/205] iwlwifi: drop packets with bad status in CD

[Sasha Levin]

From: Sara Sharon <sara.sharon@intel.com>

[ Upstream commit 7891965d74bc48fb42b5068033192f97c9aa2090 ]

We need to drop packets with errors (such as replay,
MIC, ICV, conversion, duplicate and so on).

Drop invalid packets, put the status bits in the metadata and
move the enum definition to the correct place (FW API header).

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/intel/iwlwifi/fw/api/rx.h    | 63 +++++++++++++++++++
 .../net/wireless/intel/iwlwifi/iwl-trans.h    |  1 +
 .../wireless/intel/iwlwifi/pcie/internal.h    | 60 ------------------
 drivers/net/wireless/intel/iwlwifi/pcie/rx.c  |  8 ++-
 4 files changed, 70 insertions(+), 62 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/rx.h b/drivers/net/wireless/intel/iwlwifi/fw/api/rx.h
index 2f599353c8856..2ba1401e5c0d5 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/api/rx.h
+++ b/drivers/net/wireless/intel/iwlwifi/fw/api/rx.h
@@ -574,6 +574,69 @@ struct iwl_rx_mpdu_desc {
 
 #define IWL_RX_DESC_SIZE_V1 offsetofend(struct iwl_rx_mpdu_desc, v1)
 
+#define IWL_CD_STTS_OPTIMIZED_POS	0
+#define IWL_CD_STTS_OPTIMIZED_MSK	0x01
+#define IWL_CD_STTS_TRANSFER_STATUS_POS	1
+#define IWL_CD_STTS_TRANSFER_STATUS_MSK	0x0E
+#define IWL_CD_STTS_WIFI_STATUS_POS	4
+#define IWL_CD_STTS_WIFI_STATUS_MSK	0xF0
+
+/**
+ * enum iwl_completion_desc_transfer_status -  transfer status (bits 1-3)
+ * @IWL_CD_STTS_UNUSED: unused
+ * @IWL_CD_STTS_UNUSED_2: unused
+ * @IWL_CD_STTS_END_TRANSFER: successful transfer complete.
+ *	In sniffer mode, when split is used, set in last CD completion. (RX)
+ * @IWL_CD_STTS_OVERFLOW: In sniffer mode, when using split - used for
+ *	all CD completion. (RX)
+ * @IWL_CD_STTS_ABORTED: CR abort / close flow. (RX)
+ * @IWL_CD_STTS_ERROR: general error (RX)
+ */
+enum iwl_completion_desc_transfer_status {
+	IWL_CD_STTS_UNUSED,
+	IWL_CD_STTS_UNUSED_2,
+	IWL_CD_STTS_END_TRANSFER,
+	IWL_CD_STTS_OVERFLOW,
+	IWL_CD_STTS_ABORTED,
+	IWL_CD_STTS_ERROR,
+};
+
+/**
+ * enum iwl_completion_desc_wifi_status - wifi status (bits 4-7)
+ * @IWL_CD_STTS_VALID: the packet is valid (RX)
+ * @IWL_CD_STTS_FCS_ERR: frame check sequence error (RX)
+ * @IWL_CD_STTS_SEC_KEY_ERR: error handling the security key of rx (RX)
+ * @IWL_CD_STTS_DECRYPTION_ERR: error decrypting the frame (RX)
+ * @IWL_CD_STTS_DUP: duplicate packet (RX)
+ * @IWL_CD_STTS_ICV_MIC_ERR: MIC error (RX)
+ * @IWL_CD_STTS_INTERNAL_SNAP_ERR: problems removing the snap (RX)
+ * @IWL_CD_STTS_SEC_PORT_FAIL: security port fail (RX)
+ * @IWL_CD_STTS_BA_OLD_SN: block ack received old SN (RX)
+ * @IWL_CD_STTS_QOS_NULL: QoS null packet (RX)
+ * @IWL_CD_STTS_MAC_HDR_ERR: MAC header conversion error (RX)
+ * @IWL_CD_STTS_MAX_RETRANS: reached max number of retransmissions (TX)
+ * @IWL_CD_STTS_EX_LIFETIME: exceeded lifetime (TX)
+ * @IWL_CD_STTS_NOT_USED: completed but not used (RX)
+ * @IWL_CD_STTS_REPLAY_ERR: pn check failed, replay error (RX)
+ */
+enum iwl_completion_desc_wifi_status {
+	IWL_CD_STTS_VALID,
+	IWL_CD_STTS_FCS_ERR,
+	IWL_CD_STTS_SEC_KEY_ERR,
+	IWL_CD_STTS_DECRYPTION_ERR,
+	IWL_CD_STTS_DUP,
+	IWL_CD_STTS_ICV_MIC_ERR,
+	IWL_CD_STTS_INTERNAL_SNAP_ERR,
+	IWL_CD_STTS_SEC_PORT_FAIL,
+	IWL_CD_STTS_BA_OLD_SN,
+	IWL_CD_STTS_QOS_NULL,
+	IWL_CD_STTS_MAC_HDR_ERR,
+	IWL_CD_STTS_MAX_RETRANS,
+	IWL_CD_STTS_EX_LIFETIME,
+	IWL_CD_STTS_NOT_USED,
+	IWL_CD_STTS_REPLAY_ERR,
+};
+
 struct iwl_frame_release {
 	u8 baid;
 	u8 reserved;
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-trans.h b/drivers/net/wireless/intel/iwlwifi/iwl-trans.h
index 279dd7b7a3fb9..0b8cf7f3af933 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-trans.h
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-trans.h
@@ -269,6 +269,7 @@ struct iwl_rx_cmd_buffer {
 	bool _page_stolen;
 	u32 _rx_page_order;
 	unsigned int truesize;
+	u8 status;
 };
 
 static inline void *rxb_addr(struct iwl_rx_cmd_buffer *r)
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/internal.h b/drivers/net/wireless/intel/iwlwifi/pcie/internal.h
index 00f9566bcc213..e9d67ba3e56dd 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/internal.h
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/internal.h
@@ -102,66 +102,6 @@ struct isr_statistics {
 	u32 unhandled;
 };
 
-#define IWL_CD_STTS_OPTIMIZED_POS	0
-#define IWL_CD_STTS_OPTIMIZED_MSK	0x01
-#define IWL_CD_STTS_TRANSFER_STATUS_POS	1
-#define IWL_CD_STTS_TRANSFER_STATUS_MSK	0x0E
-#define IWL_CD_STTS_WIFI_STATUS_POS	4
-#define IWL_CD_STTS_WIFI_STATUS_MSK	0xF0
-
-/**
- * enum iwl_completion_desc_transfer_status -  transfer status (bits 1-3)
- * @IWL_CD_STTS_END_TRANSFER: successful transfer complete.
- *	In sniffer mode, when split is used, set in last CD completion. (RX)
- * @IWL_CD_STTS_OVERFLOW: In sniffer mode, when using split - used for
- *	all CD completion. (RX)
- * @IWL_CD_STTS_ABORTED: CR abort / close flow. (RX)
- */
-enum iwl_completion_desc_transfer_status {
-	IWL_CD_STTS_UNUSED,
-	IWL_CD_STTS_UNUSED_2,
-	IWL_CD_STTS_END_TRANSFER,
-	IWL_CD_STTS_OVERFLOW,
-	IWL_CD_STTS_ABORTED,
-	IWL_CD_STTS_ERROR,
-};
-
-/**
- * enum iwl_completion_desc_wifi_status - wifi status (bits 4-7)
- * @IWL_CD_STTS_VALID: the packet is valid (RX)
- * @IWL_CD_STTS_FCS_ERR: frame check sequence error (RX)
- * @IWL_CD_STTS_SEC_KEY_ERR: error handling the security key of rx (RX)
- * @IWL_CD_STTS_DECRYPTION_ERR: error decrypting the frame (RX)
- * @IWL_CD_STTS_DUP: duplicate packet (RX)
- * @IWL_CD_STTS_ICV_MIC_ERR: MIC error (RX)
- * @IWL_CD_STTS_INTERNAL_SNAP_ERR: problems removing the snap (RX)
- * @IWL_CD_STTS_SEC_PORT_FAIL: security port fail (RX)
- * @IWL_CD_STTS_BA_OLD_SN: block ack received old SN (RX)
- * @IWL_CD_STTS_QOS_NULL: QoS null packet (RX)
- * @IWL_CD_STTS_MAC_HDR_ERR: MAC header conversion error (RX)
- * @IWL_CD_STTS_MAX_RETRANS: reached max number of retransmissions (TX)
- * @IWL_CD_STTS_EX_LIFETIME: exceeded lifetime (TX)
- * @IWL_CD_STTS_NOT_USED: completed but not used (RX)
- * @IWL_CD_STTS_REPLAY_ERR: pn check failed, replay error (RX)
- */
-enum iwl_completion_desc_wifi_status {
-	IWL_CD_STTS_VALID,
-	IWL_CD_STTS_FCS_ERR,
-	IWL_CD_STTS_SEC_KEY_ERR,
-	IWL_CD_STTS_DECRYPTION_ERR,
-	IWL_CD_STTS_DUP,
-	IWL_CD_STTS_ICV_MIC_ERR,
-	IWL_CD_STTS_INTERNAL_SNAP_ERR,
-	IWL_CD_STTS_SEC_PORT_FAIL,
-	IWL_CD_STTS_BA_OLD_SN,
-	IWL_CD_STTS_QOS_NULL,
-	IWL_CD_STTS_MAC_HDR_ERR,
-	IWL_CD_STTS_MAX_RETRANS,
-	IWL_CD_STTS_EX_LIFETIME,
-	IWL_CD_STTS_NOT_USED,
-	IWL_CD_STTS_REPLAY_ERR,
-};
-
 #define IWL_RX_TD_TYPE_MSK	0xff000000
 #define IWL_RX_TD_SIZE_MSK	0x00ffffff
 #define IWL_RX_TD_SIZE_2K	BIT(11)
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
index 1d144985ea589..80a1a50f5da51 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/rx.c
@@ -1198,7 +1198,8 @@ static void iwl_pcie_rx_reuse_rbd(struct iwl_trans *trans,
 static void iwl_pcie_rx_handle_rb(struct iwl_trans *trans,
 				struct iwl_rxq *rxq,
 				struct iwl_rx_mem_buffer *rxb,
-				bool emergency)
+				bool emergency,
+				int i)
 {
 	struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
 	struct iwl_txq *txq = trans_pcie->txq[trans_pcie->cmd_queue];
@@ -1224,6 +1225,9 @@ static void iwl_pcie_rx_handle_rb(struct iwl_trans *trans,
 			.truesize = max_len,
 		};
 
+		if (trans->cfg->device_family >= IWL_DEVICE_FAMILY_22560)
+			rxcb.status = rxq->cd[i].status;
+
 		pkt = rxb_addr(&rxcb);
 
 		if (pkt->len_n_flags == cpu_to_le32(FH_RSCSR_FRAME_INVALID)) {
@@ -1430,7 +1434,7 @@ restart:
 			goto out;
 
 		IWL_DEBUG_RX(trans, "Q %d: HW = %d, SW = %d\n", rxq->id, r, i);
-		iwl_pcie_rx_handle_rb(trans, rxq, rxb, emergency);
+		iwl_pcie_rx_handle_rb(trans, rxq, rxb, emergency, i);
 
 		i = (i + 1) & (rxq->queue_size - 1);
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 057/205] iwlwifi: don't WARN on trying to dump dead firmware

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 84f260251ed8153e84c64eb2c5278ab18d3ddef6 ]

There's no point in warning here, the user will just get an
error back to the debugfs file write, and warning just makes
it seem like there's an internal consistency problem when in
reality the user just happened to hit this at a bad time.
Remove the warning.

Fixes: f45f979dc208 ("iwlwifi: mvm: disable dbg data collect when fw isn't alive")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/fw/dbg.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/dbg.c b/drivers/net/wireless/intel/iwlwifi/fw/dbg.c
index a31a42e673c46..8070b2d4c46fe 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/dbg.c
+++ b/drivers/net/wireless/intel/iwlwifi/fw/dbg.c
@@ -1016,7 +1016,7 @@ int iwl_fw_dbg_collect_desc(struct iwl_fw_runtime *fwrt,
 	 * If the loading of the FW completed successfully, the next step is to
 	 * get the SMEM config data. Thus, if fwrt->smem_cfg.num_lmacs is non
 	 * zero, the FW was already loaded successully. If the state is "NO_FW"
-	 * in such a case - WARN and exit, since FW may be dead. Otherwise, we
+	 * in such a case - exit, since FW may be dead. Otherwise, we
 	 * can try to collect the data, since FW might just not be fully
 	 * loaded (no "ALIVE" yet), and the debug data is accessible.
 	 *
@@ -1024,9 +1024,8 @@ int iwl_fw_dbg_collect_desc(struct iwl_fw_runtime *fwrt,
 	 *	config. In such a case, due to HW access problems, we might
 	 *	collect garbage.
 	 */
-	if (WARN((fwrt->trans->state == IWL_TRANS_NO_FW) &&
-		 fwrt->smem_cfg.num_lmacs,
-		 "Can't collect dbg data when FW isn't alive\n"))
+	if (fwrt->trans->state == IWL_TRANS_NO_FW &&
+	    fwrt->smem_cfg.num_lmacs)
 		return -EIO;
 
 	if (test_and_set_bit(IWL_FWRT_STATUS_DUMPING, &fwrt->status))
-- 
2.20.1

[PATCH AUTOSEL 4.19 058/205] iwlwifi: mvm: avoid sending too many BARs

[Sasha Levin]

From: Sara Sharon <sara.sharon@intel.com>

[ Upstream commit 1a19c139be18ed4d6d681049cc48586fae070120 ]

When we receive TX response, we may release a few packets
due to a hole that was closed in the transmission window.

However, if that frame failed, we will mark all the released
frames as failed and will send multiple BARs.

This affects statistics badly, and cause unnecessary frames
transmission.

Instead, mark all the following packets as success, with the
desired result of sending a bar for the failed frame only.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
index 5615ce55cef56..cb2e52e7f46c9 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c
@@ -1438,6 +1438,14 @@ static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm,
 			break;
 		}
 
+		/*
+		 * If we are freeing multiple frames, mark all the frames
+		 * but the first one as acked, since they were acknowledged
+		 * before
+		 * */
+		if (skb_freed > 1)
+			info->flags |= IEEE80211_TX_STAT_ACK;
+
 		iwl_mvm_tx_status_check_trigger(mvm, status);
 
 		info->status.rates[0].count = tx_resp->failure_frame + 1;
-- 
2.20.1

[PATCH AUTOSEL 4.19 059/205] media: vicodec: fix out-of-range values when decoding

[Sasha Levin]

From: Hans Verkuil <hverkuil@xs4all.nl>

[ Upstream commit be5a1509af8dd8a78fea24a35fe4a82d4cd0ae70 ]

While decoding you need to make sure you do not get values < 0
or > 255. Note that since this code will also be used in userspace
utilities the clamp macro isn't used since that is kernel-only.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/vicodec/vicodec-codec.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/vicodec/vicodec-codec.c b/drivers/media/platform/vicodec/vicodec-codec.c
index 2d047646f6147..d854b2344f12b 100644
--- a/drivers/media/platform/vicodec/vicodec-codec.c
+++ b/drivers/media/platform/vicodec/vicodec-codec.c
@@ -588,8 +588,14 @@ static void fill_decoder_block(u8 *dst, const s16 *input, int stride)
 	int i, j;
 
 	for (i = 0; i < 8; i++) {
-		for (j = 0; j < 8; j++)
-			*dst++ = *input++;
+		for (j = 0; j < 8; j++, input++, dst++) {
+			if (*input < 0)
+				*dst = 0;
+			else if (*input > 255)
+				*dst = 255;
+			else
+				*dst = *input;
+		}
 		dst += stride - 8;
 	}
 }
-- 
2.20.1

[PATCH AUTOSEL 4.19 060/205] media: i2c: Fix pm_runtime_get_if_in_use() usage in sensor drivers

[Sasha Levin]

From: Sakari Ailus <sakari.ailus@linux.intel.com>

[ Upstream commit 4d471563d87b2b83e73b8abffb9273950e6d2e36 ]

pm_runtime_get_if_in_use() returns -EINVAL if runtime PM is disabled. This
should not be considered an error. Generally the driver has enabled
runtime PM already so getting this error due to runtime PM being disabled
will not happen.

Instead of checking for lesser or equal to zero, check for zero only.
Address this for drivers where this pattern exists.

This patch has been produced using the following command:

$ git grep -l pm_runtime_get_if_in_use -- drivers/media/i2c/ | \
  xargs perl -i -pe 's/(pm_runtime_get_if_in_use\(.*\)) \<\= 0/!$1/'

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/ov13858.c | 2 +-
 drivers/media/i2c/ov2685.c  | 2 +-
 drivers/media/i2c/ov5670.c  | 2 +-
 drivers/media/i2c/ov5695.c  | 2 +-
 drivers/media/i2c/ov7740.c  | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/media/i2c/ov13858.c b/drivers/media/i2c/ov13858.c
index a66f6201f53c7..0e7a85c4996c7 100644
--- a/drivers/media/i2c/ov13858.c
+++ b/drivers/media/i2c/ov13858.c
@@ -1230,7 +1230,7 @@ static int ov13858_set_ctrl(struct v4l2_ctrl *ctrl)
 	 * Applying V4L2 control value only happens
 	 * when power is up for streaming
 	 */
-	if (pm_runtime_get_if_in_use(&client->dev) <= 0)
+	if (!pm_runtime_get_if_in_use(&client->dev))
 		return 0;
 
 	ret = 0;
diff --git a/drivers/media/i2c/ov2685.c b/drivers/media/i2c/ov2685.c
index 385c1886a9470..98a1f2e312b58 100644
--- a/drivers/media/i2c/ov2685.c
+++ b/drivers/media/i2c/ov2685.c
@@ -549,7 +549,7 @@ static int ov2685_set_ctrl(struct v4l2_ctrl *ctrl)
 		break;
 	}
 
-	if (pm_runtime_get_if_in_use(&client->dev) <= 0)
+	if (!pm_runtime_get_if_in_use(&client->dev))
 		return 0;
 
 	switch (ctrl->id) {
diff --git a/drivers/media/i2c/ov5670.c b/drivers/media/i2c/ov5670.c
index 7b7c74d773707..53dd30d96e691 100644
--- a/drivers/media/i2c/ov5670.c
+++ b/drivers/media/i2c/ov5670.c
@@ -2016,7 +2016,7 @@ static int ov5670_set_ctrl(struct v4l2_ctrl *ctrl)
 	}
 
 	/* V4L2 controls values will be applied only when power is already up */
-	if (pm_runtime_get_if_in_use(&client->dev) <= 0)
+	if (!pm_runtime_get_if_in_use(&client->dev))
 		return 0;
 
 	switch (ctrl->id) {
diff --git a/drivers/media/i2c/ov5695.c b/drivers/media/i2c/ov5695.c
index 9a80decd93d3c..5d107c53364d6 100644
--- a/drivers/media/i2c/ov5695.c
+++ b/drivers/media/i2c/ov5695.c
@@ -1110,7 +1110,7 @@ static int ov5695_set_ctrl(struct v4l2_ctrl *ctrl)
 		break;
 	}
 
-	if (pm_runtime_get_if_in_use(&client->dev) <= 0)
+	if (!pm_runtime_get_if_in_use(&client->dev))
 		return 0;
 
 	switch (ctrl->id) {
diff --git a/drivers/media/i2c/ov7740.c b/drivers/media/i2c/ov7740.c
index 8a6a7a5929aa3..7804013934ab5 100644
--- a/drivers/media/i2c/ov7740.c
+++ b/drivers/media/i2c/ov7740.c
@@ -510,7 +510,7 @@ static int ov7740_set_ctrl(struct v4l2_ctrl *ctrl)
 	int ret;
 	u8 val = 0;
 
-	if (pm_runtime_get_if_in_use(&client->dev) <= 0)
+	if (!pm_runtime_get_if_in_use(&client->dev))
 		return 0;
 
 	switch (ctrl->id) {
-- 
2.20.1

[PATCH AUTOSEL 4.19 061/205] media: ov772x: Disable clk on error path

[Sasha Levin]

From: Alexey Khoroshilov <khoroshilov@ispras.ru>

[ Upstream commit 1d18c2cd9d38ad639b2e00546b9ee638f2cef4b0 ]

If ov772x_power_on() is unable to get GPIO rstb,
the clock is left undisabled.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/ov772x.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/i2c/ov772x.c b/drivers/media/i2c/ov772x.c
index 7158c31d8403b..4eae5f2f7d318 100644
--- a/drivers/media/i2c/ov772x.c
+++ b/drivers/media/i2c/ov772x.c
@@ -896,6 +896,7 @@ static int ov772x_power_on(struct ov772x_priv *priv)
 					     GPIOD_OUT_LOW);
 	if (IS_ERR(priv->rstb_gpio)) {
 		dev_info(&client->dev, "Unable to get GPIO \"reset\"");
+		clk_disable_unprepare(priv->clk);
 		return PTR_ERR(priv->rstb_gpio);
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 062/205] ARM: dts: pxa: fix the rtc controller

[Sasha Levin]

From: Robert Jarzmik <robert.jarzmik@free.fr>

[ Upstream commit 24a610eba32a80ed778ea79680b600c3fe73d7de ]

The RTC controller is fed by an external fixed 32kHz clock. Yet the
driver wants to acquire this clock, even though it doesn't make any use
of it, ie. doesn't get the rate to make calculation.

Therefore, use the exported 32.768kHz clock in the PXA clock tree to
make the driver happy and working.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/pxa25x.dtsi | 4 ++++
 arch/arm/boot/dts/pxa27x.dtsi | 4 ++++
 2 files changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/pxa25x.dtsi b/arch/arm/boot/dts/pxa25x.dtsi
index 95d59be97213e..8494b57871709 100644
--- a/arch/arm/boot/dts/pxa25x.dtsi
+++ b/arch/arm/boot/dts/pxa25x.dtsi
@@ -80,6 +80,10 @@
 			#pwm-cells = <1>;
 			clocks = <&clks CLK_PWM1>;
 		};
+
+		rtc@40900000 {
+			clocks = <&clks CLK_OSC32k768>;
+		};
 	};
 
 	timer@40a00000 {
diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi
index 747f750f675d9..2ab6986433c82 100644
--- a/arch/arm/boot/dts/pxa27x.dtsi
+++ b/arch/arm/boot/dts/pxa27x.dtsi
@@ -113,6 +113,10 @@
 
 			status = "disabled";
 		};
+
+		rtc@40900000 {
+			clocks = <&clks CLK_OSC32k768>;
+		};
 	};
 
 	clocks {
-- 
2.20.1

[PATCH AUTOSEL 4.19 063/205] ARM: dts: pxa: fix power i2c base address

[Sasha Levin]

From: Marcel Ziswiler <marcel@ziswiler.com>

[ Upstream commit 8a1ecc01a473b75ab97be9b36f623e4551a6e9ae ]

There is one too many zeroes in the Power I2C base address. Fix this.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/pxa27x.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi
index 2ab6986433c82..3228ad5fb725f 100644
--- a/arch/arm/boot/dts/pxa27x.dtsi
+++ b/arch/arm/boot/dts/pxa27x.dtsi
@@ -71,7 +71,7 @@
 			clocks = <&clks CLK_PWM1>;
 		};
 
-		pwri2c: i2c@40f000180 {
+		pwri2c: i2c@40f00180 {
 			compatible = "mrvl,pxa-i2c";
 			reg = <0x40f00180 0x24>;
 			interrupts = <6>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 064/205] rtl8187: Fix warning generated when strncpy() destination length matches the sixe argument

[Sasha Levin]

From: Larry Finger <Larry.Finger@lwfinger.net>

[ Upstream commit 199ba9faca909e77ac533449ecd1248123ce89e7 ]

In gcc8, when the 3rd argument (size) of a call to strncpy() matches the
length of the first argument, the compiler warns of the possibility of an
unterminated string. Using strlcpy() forces a null at the end.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtl818x/rtl8187/leds.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/realtek/rtl818x/rtl8187/leds.c b/drivers/net/wireless/realtek/rtl818x/rtl8187/leds.c
index c2d5b495c179a..c089540116fa7 100644
--- a/drivers/net/wireless/realtek/rtl818x/rtl8187/leds.c
+++ b/drivers/net/wireless/realtek/rtl818x/rtl8187/leds.c
@@ -146,7 +146,7 @@ static int rtl8187_register_led(struct ieee80211_hw *dev,
 	led->dev = dev;
 	led->ledpin = ledpin;
 	led->is_radio = is_radio;
-	strncpy(led->name, name, sizeof(led->name));
+	strlcpy(led->name, name, sizeof(led->name));
 
 	led->led_dev.name = led->name;
 	led->led_dev.default_trigger = default_trigger;
-- 
2.20.1

[PATCH AUTOSEL 4.19 065/205] mwifiex: do no submit URB in suspended state

[Sasha Levin]

From: Ganapathi Bhat <gbhat@marvell.com>

[ Upstream commit 7bd4628c2f31c51254aa39628ecae521d00d0b90 ]

There is a possible race between USB suspend and main thread:

1. After processing the command response, main thread will submit
rx_cmd URB back so as to process next command response, by
calling mwifiex_usb_submit_rx_urb.

2. During USB suspend, the suspend handler will check if rx_cmd
URB is pending(submitted) and if true, kill this URB.

There is a possible race between #1 and #2, where rx_cmd URB will
be submitted by main thread(#1) after the suspend handler check
in #2.

To fix this, check if device is already suspended in
mwifiex_usb_submit_rx_urb, in which case do not submit the URB.

Signed-off-by: Vidya Dharmaraju <vidyad@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/usb.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/wireless/marvell/mwifiex/usb.c b/drivers/net/wireless/marvell/mwifiex/usb.c
index 433c6a16870b6..76d80fd545236 100644
--- a/drivers/net/wireless/marvell/mwifiex/usb.c
+++ b/drivers/net/wireless/marvell/mwifiex/usb.c
@@ -298,6 +298,13 @@ static int mwifiex_usb_submit_rx_urb(struct urb_context *ctx, int size)
 	struct mwifiex_adapter *adapter = ctx->adapter;
 	struct usb_card_rec *card = (struct usb_card_rec *)adapter->card;
 
+	if (test_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags)) {
+		mwifiex_dbg(adapter, ERROR,
+			    "%s: card removed/suspended, EP %d rx_cmd URB submit skipped\n",
+			    __func__, ctx->ep);
+		return -1;
+	}
+
 	if (card->rx_cmd_ep != ctx->ep) {
 		ctx->skb = dev_alloc_skb(size);
 		if (!ctx->skb) {
-- 
2.20.1

[PATCH AUTOSEL 4.19 066/205] mwifex: free rx_cmd skb in suspended state

[Sasha Levin]

From: Ganapathi Bhat <gbhat@marvell.com>

[ Upstream commit 33a164fa8a4c91408e0b7738f754cb1a7827c5f2 ]

USB suspend handler will kill the presubmitted rx_cmd URB. This
triggers a call to the corresponding URB complete handler, which
will free the rx_cmd skb, associated with rx_cmd URB. Due to a
possible race betwen suspend handler and main thread, depicted in
'commit bfcacac6c84b ("mwifiex: do no submit URB in suspended
state")', it is possible that the rx_cmd skb will fail to get
freed. This causes a memory leak, since the resume handler will
always allocate a new rx_cmd skb.

To fix this, free the rx_cmd skb in mwifiex_usb_submit_rx_urb, if
the device is in suspended state.

Signed-off-by: Vidya Dharmaraju <vidyad@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/mwifiex/usb.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/wireless/marvell/mwifiex/usb.c b/drivers/net/wireless/marvell/mwifiex/usb.c
index 76d80fd545236..d445acc4786b7 100644
--- a/drivers/net/wireless/marvell/mwifiex/usb.c
+++ b/drivers/net/wireless/marvell/mwifiex/usb.c
@@ -299,6 +299,12 @@ static int mwifiex_usb_submit_rx_urb(struct urb_context *ctx, int size)
 	struct usb_card_rec *card = (struct usb_card_rec *)adapter->card;
 
 	if (test_bit(MWIFIEX_IS_SUSPENDED, &adapter->work_flags)) {
+		if (card->rx_cmd_ep == ctx->ep) {
+			mwifiex_dbg(adapter, INFO, "%s: free rx_cmd skb\n",
+				    __func__);
+			dev_kfree_skb_any(ctx->skb);
+			ctx->skb = NULL;
+		}
 		mwifiex_dbg(adapter, ERROR,
 			    "%s: card removed/suspended, EP %d rx_cmd URB submit skipped\n",
 			    __func__, ctx->ep);
-- 
2.20.1

[PATCH AUTOSEL 4.19 067/205] brcmfmac: fix wrong strnchr usage

[Sasha Levin]

From: Rasmus Villemoes <linux@rasmusvillemoes.dk>

[ Upstream commit cb18e2e9ec71d42409a51b83546686c609780dde ]

strnchr takes arguments in the order of its name: string, max bytes to
read, character to search for. Here we're passing '\n' aka 10 as the
buffer size, and searching for sizeof(buf) aka BRCMF_DCMD_SMLEN aka
256 (aka '\0', since it's implicitly converted to char) within those 10
bytes.

Just interchanging the last two arguments would still leave a bug,
because if we've been successful once, there are not sizeof(buf)
characters left after the new value of p.

Since clmver is immediately afterwards passed as a %s argument, I assume
that it is actually a properly nul-terminated string. For that case, we
have strreplace().

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
index 27893af63ebc3..8510d207ee87d 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
@@ -296,9 +296,7 @@ int brcmf_c_preinit_dcmds(struct brcmf_if *ifp)
 		/* Replace all newline/linefeed characters with space
 		 * character
 		 */
-		ptr = clmver;
-		while ((ptr = strnchr(ptr, '\n', sizeof(buf))) != NULL)
-			*ptr = ' ';
+		strreplace(clmver, '\n', ' ');
 
 		brcmf_dbg(INFO, "CLM version = %s\n", clmver);
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.19 068/205] mt76: Fix comparisons with invalid hardware key index

[Sasha Levin]

From: Geert Uytterhoeven <geert@linux-m68k.org>

[ Upstream commit 81c8eccc2404d06082025b773f1d90e8c861bc6a ]

With gcc 4.1.2:

    drivers/net/wireless/mediatek/mt76/mt76x0/tx.c: In function ‘mt76x0_tx’:
    drivers/net/wireless/mediatek/mt76/mt76x0/tx.c:169: warning: comparison is always true due to limited range of data type
    drivers/net/wireless/mediatek/mt76/mt76x2_tx_common.c: In function ‘mt76x2_tx’:
    drivers/net/wireless/mediatek/mt76/mt76x2_tx_common.c:35: warning: comparison is always true due to limited range of data type

While assigning -1 to a u8 works fine, comparing with -1 does not work
as expected.

Fix this by comparing with 0xff, like is already done in some other
places.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt76x0/tx.c        | 2 +-
 drivers/net/wireless/mediatek/mt76/mt76x2_tx_common.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/tx.c b/drivers/net/wireless/mediatek/mt76/mt76x0/tx.c
index 751b49c28ae53..c45d05d5aab1d 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x0/tx.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x0/tx.c
@@ -166,7 +166,7 @@ void mt76x0_tx(struct ieee80211_hw *hw, struct ieee80211_tx_control *control,
 	if (sta) {
 		msta = (struct mt76_sta *) sta->drv_priv;
 		wcid = &msta->wcid;
-	} else if (vif && (!info->control.hw_key && wcid->hw_key_idx != -1)) {
+	} else if (vif && (!info->control.hw_key && wcid->hw_key_idx != 0xff)) {
 		struct mt76_vif *mvif = (struct mt76_vif *)vif->drv_priv;
 
 		wcid = &mvif->group_wcid;
diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2_tx_common.c b/drivers/net/wireless/mediatek/mt76/mt76x2_tx_common.c
index 36afb166fa3ff..c0ca0df84ed8b 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x2_tx_common.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x2_tx_common.c
@@ -32,7 +32,7 @@ void mt76x2_tx(struct ieee80211_hw *hw, struct ieee80211_tx_control *control,
 		msta = (struct mt76x2_sta *)control->sta->drv_priv;
 		wcid = &msta->wcid;
 		/* sw encrypted frames */
-		if (!info->control.hw_key && wcid->hw_key_idx != -1)
+		if (!info->control.hw_key && wcid->hw_key_idx != 0xff)
 			control->sta = NULL;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 069/205] soc: imx: gpc: fix PDN delay

[Sasha Levin]

From: Sven Schmitt <Sven.Schmitt@mixed-mode.de>

[ Upstream commit 9f4d61d531e0efc9c3283963ae5ef7e314579191 ]

imx6_pm_domain_power_off() reads iso and iso2sw from GPC_PGC_PUPSCR_OFFS
which stores the power up delays.
So use GPC_PGC_PDNSCR_OFFS for the correct delays.

Signed-off-by: Sven Schmitt <sven.schmitt@mixed-mode.de>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/imx/gpc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/soc/imx/gpc.c b/drivers/soc/imx/gpc.c
index b3da635970ea7..d160fc2a7b7a2 100644
--- a/drivers/soc/imx/gpc.c
+++ b/drivers/soc/imx/gpc.c
@@ -69,7 +69,7 @@ static int imx6_pm_domain_power_off(struct generic_pm_domain *genpd)
 	u32 val;
 
 	/* Read ISO and ISO2SW power down delays */
-	regmap_read(pd->regmap, pd->reg_offs + GPC_PGC_PUPSCR_OFFS, &val);
+	regmap_read(pd->regmap, pd->reg_offs + GPC_PGC_PDNSCR_OFFS, &val);
 	iso = val & 0x3f;
 	iso2sw = (val >> 8) & 0x3f;
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 070/205] ASoC: rsnd: ssi: Fix issue in dma data address assignment

[Sasha Levin]

From: Jiada Wang <jiada_wang@mentor.com>

[ Upstream commit 0e289012b47a2de1f029a6b61c75998e2f159dd9 ]

Same SSI device may be used in different dai links,
by only having one dma struct in rsnd_ssi, after the first
instance's dma config be initilized, the following instances
can no longer configure dma, this causes issue, when their
dma data address are different from the first instance.

Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Signed-off-by: Timo Wischer <twischer@de.adit-jv.com>
[Kuninori: tidyup for upstream]
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sh/rcar/rsnd.h | 1 +
 sound/soc/sh/rcar/ssi.c  | 4 +---
 2 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/sound/soc/sh/rcar/rsnd.h b/sound/soc/sh/rcar/rsnd.h
index 8f7a0abfa751e..f64c7058b258b 100644
--- a/sound/soc/sh/rcar/rsnd.h
+++ b/sound/soc/sh/rcar/rsnd.h
@@ -438,6 +438,7 @@ struct rsnd_dai_stream {
 	char name[RSND_DAI_NAME_SIZE];
 	struct snd_pcm_substream *substream;
 	struct rsnd_mod *mod[RSND_MOD_MAX];
+	struct rsnd_mod *dma;
 	struct rsnd_dai *rdai;
 	struct device *dmac_dev; /* for IPMMU */
 	u32 parent_ssi_status;
diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c
index 9410e0a9b14b7..33dc8d6ad35b2 100644
--- a/sound/soc/sh/rcar/ssi.c
+++ b/sound/soc/sh/rcar/ssi.c
@@ -72,7 +72,6 @@
 
 struct rsnd_ssi {
 	struct rsnd_mod mod;
-	struct rsnd_mod *dma;
 
 	u32 flags;
 	u32 cr_own;
@@ -873,7 +872,6 @@ static int rsnd_ssi_dma_probe(struct rsnd_mod *mod,
 			      struct rsnd_dai_stream *io,
 			      struct rsnd_priv *priv)
 {
-	struct rsnd_ssi *ssi = rsnd_mod_to_ssi(mod);
 	int ret;
 
 	/*
@@ -888,7 +886,7 @@ static int rsnd_ssi_dma_probe(struct rsnd_mod *mod,
 		return ret;
 
 	/* SSI probe might be called many times in MUX multi path */
-	ret = rsnd_dma_attach(io, mod, &ssi->dma);
+	ret = rsnd_dma_attach(io, mod, &io->dma);
 
 	return ret;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.19 071/205] net: hns3: Fix for multicast failure

[Sasha Levin]

From: Huazhong Tan <tanhuazhong@huawei.com>

[ Upstream commit fd5f9da3f6583046215d614a87792b46e55785e2 ]

When the lower 24 bits of the IPV6 link-local addresses at both
ends are the same, the multicast MAC address for Neigbour Discovery
is the same. The multicast for Neigbour Discovery will fail.

This patch fixes it by including the bonding uplink port in the
multicast group.

Fixes: 46a3df9f9718("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 89ca69fa2b97b..44d0cb3f73a44 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -4374,7 +4374,7 @@ int hclge_add_mc_addr_common(struct hclge_vport *vport,
 	hnae3_set_bit(req.flags, HCLGE_MAC_VLAN_BIT0_EN_B, 1);
 	hnae3_set_bit(req.entry_type, HCLGE_MAC_VLAN_BIT0_EN_B, 0);
 	hnae3_set_bit(req.entry_type, HCLGE_MAC_VLAN_BIT1_EN_B, 1);
-	hnae3_set_bit(req.mc_mac_en, HCLGE_MAC_VLAN_BIT0_EN_B, 0);
+	hnae3_set_bit(req.mc_mac_en, HCLGE_MAC_VLAN_BIT0_EN_B, 1);
 	hclge_prepare_mac_addr(&req, addr);
 	status = hclge_lookup_mac_vlan_tbl(vport, &req, desc, true);
 	if (!status) {
@@ -4441,7 +4441,7 @@ int hclge_rm_mc_addr_common(struct hclge_vport *vport,
 	hnae3_set_bit(req.flags, HCLGE_MAC_VLAN_BIT0_EN_B, 1);
 	hnae3_set_bit(req.entry_type, HCLGE_MAC_VLAN_BIT0_EN_B, 0);
 	hnae3_set_bit(req.entry_type, HCLGE_MAC_VLAN_BIT1_EN_B, 1);
-	hnae3_set_bit(req.mc_mac_en, HCLGE_MAC_VLAN_BIT0_EN_B, 0);
+	hnae3_set_bit(req.mc_mac_en, HCLGE_MAC_VLAN_BIT0_EN_B, 1);
 	hclge_prepare_mac_addr(&req, addr);
 	status = hclge_lookup_mac_vlan_tbl(vport, &req, desc, true);
 	if (!status) {
-- 
2.20.1

[PATCH AUTOSEL 4.19 072/205] net: hns3: Fix error of checking used vlan id

[Sasha Levin]

From: Jian Shen <shenjian15@huawei.com>

[ Upstream commit 54e97d117bafa161b08c6ade243a335d92890d94 ]

PF uses hdev->vlan_table to manage the port vlan table. In function
hclge_set_vlan_filter_hw(), it checks whether a vlan id has been used,
by foreach all the vport bits. It should use macro HCLGE_VPORT_NUM,
not VLAN_N_VID as the foreach condition.

Fixes: 6c251711b37f ("net: hns3: Disable vf vlan filter when vf vlan table is full")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 44d0cb3f73a44..0e7c92f624e91 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -4784,7 +4784,7 @@ static int hclge_set_vlan_filter_hw(struct hclge_dev *hdev, __be16 proto,
 		return -EINVAL;
 	}
 
-	for_each_set_bit(vport_idx, hdev->vlan_table[vlan_id], VLAN_N_VID)
+	for_each_set_bit(vport_idx, hdev->vlan_table[vlan_id], HCLGE_VPORT_NUM)
 		vport_num++;
 
 	if ((is_kill && vport_num == 0) || (!is_kill && vport_num == 1))
-- 
2.20.1

[PATCH AUTOSEL 4.19 073/205] net: hns3: Fix for loopback selftest failed problem

[Sasha Levin]

From: Yunsheng Lin <linyunsheng@huawei.com>

[ Upstream commit 0f29fc23b21d3cbd966537bfabba07c00466b787 ]

Tqp and mac need to be enabled when doing loopback selftest,
ae_algo->ops->start/stop is used to do the job, there is a
time window between ae_algo->ops->start/stop and loopback setup,
which will cause selftest failed problem when there is frame
coming in during that time window.

This patch fixes it by enabling the tqp and mac during loopback
setup process.

Fixes: c39c4d98dc65 ("net: hns3: Add mac loopback selftest support in hns3 driver")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../ethernet/hisilicon/hns3/hns3_ethtool.c    | 17 +------
 .../hisilicon/hns3/hns3pf/hclge_main.c        | 51 +++++++++++--------
 2 files changed, 31 insertions(+), 37 deletions(-)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index 6a3c6b02a77cd..5bdcd92d86122 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -100,41 +100,26 @@ static int hns3_lp_up(struct net_device *ndev, enum hnae3_loop loop_mode)
 	struct hnae3_handle *h = hns3_get_handle(ndev);
 	int ret;
 
-	if (!h->ae_algo->ops->start)
-		return -EOPNOTSUPP;
-
 	ret = hns3_nic_reset_all_ring(h);
 	if (ret)
 		return ret;
 
-	ret = h->ae_algo->ops->start(h);
-	if (ret) {
-		netdev_err(ndev,
-			   "hns3_lb_up ae start return error: %d\n", ret);
-		return ret;
-	}
-
 	ret = hns3_lp_setup(ndev, loop_mode, true);
 	usleep_range(10000, 20000);
 
-	return ret;
+	return 0;
 }
 
 static int hns3_lp_down(struct net_device *ndev, enum hnae3_loop loop_mode)
 {
-	struct hnae3_handle *h = hns3_get_handle(ndev);
 	int ret;
 
-	if (!h->ae_algo->ops->stop)
-		return -EOPNOTSUPP;
-
 	ret = hns3_lp_setup(ndev, loop_mode, false);
 	if (ret) {
 		netdev_err(ndev, "lb_setup return error: %d\n", ret);
 		return ret;
 	}
 
-	h->ae_algo->ops->stop(h);
 	usleep_range(10000, 20000);
 
 	return 0;
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 0e7c92f624e91..0cf33fa351df3 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -3666,6 +3666,8 @@ static int hclge_set_mac_loopback(struct hclge_dev *hdev, bool en)
 	/* 2 Then setup the loopback flag */
 	loop_en = le32_to_cpu(req->txrx_pad_fcs_loop_en);
 	hnae3_set_bit(loop_en, HCLGE_MAC_APP_LP_B, en ? 1 : 0);
+	hnae3_set_bit(loop_en, HCLGE_MAC_TX_EN_B, en ? 1 : 0);
+	hnae3_set_bit(loop_en, HCLGE_MAC_RX_EN_B, en ? 1 : 0);
 
 	req->txrx_pad_fcs_loop_en = cpu_to_le32(loop_en);
 
@@ -3726,15 +3728,36 @@ static int hclge_set_serdes_loopback(struct hclge_dev *hdev, bool en)
 		return -EIO;
 	}
 
+	hclge_cfg_mac_mode(hdev, en);
 	return 0;
 }
 
+static int hclge_tqp_enable(struct hclge_dev *hdev, int tqp_id,
+			    int stream_id, bool enable)
+{
+	struct hclge_desc desc;
+	struct hclge_cfg_com_tqp_queue_cmd *req =
+		(struct hclge_cfg_com_tqp_queue_cmd *)desc.data;
+	int ret;
+
+	hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_CFG_COM_TQP_QUEUE, false);
+	req->tqp_id = cpu_to_le16(tqp_id & HCLGE_RING_ID_MASK);
+	req->stream_id = cpu_to_le16(stream_id);
+	req->enable |= enable << HCLGE_TQP_ENABLE_B;
+
+	ret = hclge_cmd_send(&hdev->hw, &desc, 1);
+	if (ret)
+		dev_err(&hdev->pdev->dev,
+			"Tqp enable fail, status =%d.\n", ret);
+	return ret;
+}
+
 static int hclge_set_loopback(struct hnae3_handle *handle,
 			      enum hnae3_loop loop_mode, bool en)
 {
 	struct hclge_vport *vport = hclge_get_vport(handle);
 	struct hclge_dev *hdev = vport->back;
-	int ret;
+	int i, ret;
 
 	switch (loop_mode) {
 	case HNAE3_MAC_INTER_LOOP_MAC:
@@ -3750,27 +3773,13 @@ static int hclge_set_loopback(struct hnae3_handle *handle,
 		break;
 	}
 
-	return ret;
-}
-
-static int hclge_tqp_enable(struct hclge_dev *hdev, int tqp_id,
-			    int stream_id, bool enable)
-{
-	struct hclge_desc desc;
-	struct hclge_cfg_com_tqp_queue_cmd *req =
-		(struct hclge_cfg_com_tqp_queue_cmd *)desc.data;
-	int ret;
-
-	hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_CFG_COM_TQP_QUEUE, false);
-	req->tqp_id = cpu_to_le16(tqp_id & HCLGE_RING_ID_MASK);
-	req->stream_id = cpu_to_le16(stream_id);
-	req->enable |= enable << HCLGE_TQP_ENABLE_B;
+	for (i = 0; i < vport->alloc_tqps; i++) {
+		ret = hclge_tqp_enable(hdev, i, 0, en);
+		if (ret)
+			return ret;
+	}
 
-	ret = hclge_cmd_send(&hdev->hw, &desc, 1);
-	if (ret)
-		dev_err(&hdev->pdev->dev,
-			"Tqp enable fail, status =%d.\n", ret);
-	return ret;
+	return 0;
 }
 
 static void hclge_reset_tqp_stats(struct hnae3_handle *handle)
-- 
2.20.1

[PATCH AUTOSEL 4.19 074/205] net: hns3: Change the dst mac addr of loopback packet

[Sasha Levin]

From: Yunsheng Lin <linyunsheng@huawei.com>

[ Upstream commit 7f7d9e501f4123e64b130576621d24f9379adc8f ]

Currently, the dst mac addr of loopback packet is the same as
the host' mac addr, the SSU component may loop back the packet
to host before the packet reaches mac or serdes, which will defect
the purpose of mac or serdes selftest.

This patch changes it by adding 0x1f to the last byte of dst mac
addr.

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index 5bdcd92d86122..0c34ea1223580 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -137,6 +137,7 @@ static void hns3_lp_setup_skb(struct sk_buff *skb)
 	packet = skb_put(skb, HNS3_NIC_LB_TEST_PACKET_SIZE);
 
 	memcpy(ethh->h_dest, ndev->dev_addr, ETH_ALEN);
+	ethh->h_dest[5] += 0x1f;
 	eth_zero_addr(ethh->h_source);
 	ethh->h_proto = htons(ETH_P_ARP);
 	skb_reset_mac_header(skb);
-- 
2.20.1

[PATCH AUTOSEL 4.19 075/205] net/mlx5: Fix atomic_mode enum values

[Sasha Levin]

From: Moni Shoua <monis@mellanox.com>

[ Upstream commit aa7e80b220f3a543eefbe4b7e2c5d2b73e2e2ef7 ]

The field atomic_mode is 4 bits wide and therefore can hold values
from 0x0 to 0xf. Remove the unnecessary 20 bit shift that made the values
be incorrect. While that, remove unused enum values.

Fixes: 57cda166bbe0 ("net/mlx5: Add DCT command interface")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/linux/mlx5/driver.h | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h
index e8b92dee5a726..ae64fced188d1 100644
--- a/include/linux/mlx5/driver.h
+++ b/include/linux/mlx5/driver.h
@@ -163,10 +163,7 @@ enum mlx5_dcbx_oper_mode {
 };
 
 enum mlx5_dct_atomic_mode {
-	MLX5_ATOMIC_MODE_DCT_OFF        = 20,
-	MLX5_ATOMIC_MODE_DCT_NONE       = 0 << MLX5_ATOMIC_MODE_DCT_OFF,
-	MLX5_ATOMIC_MODE_DCT_IB_COMP    = 1 << MLX5_ATOMIC_MODE_DCT_OFF,
-	MLX5_ATOMIC_MODE_DCT_CX         = 2 << MLX5_ATOMIC_MODE_DCT_OFF,
+	MLX5_ATOMIC_MODE_DCT_CX         = 2,
 };
 
 enum {
-- 
2.20.1

[PATCH AUTOSEL 4.19 076/205] net: phy: mscc: read 'vsc8531,vddmac' as an u32

[Sasha Levin]

From: Quentin Schulz <quentin.schulz@bootlin.com>

[ Upstream commit a993e0f583c7925adaa7721226ccd7a41e7e63d1 ]

In the DT binding, it is specified nowhere that 'vsc8531,vddmac' is an
u16, even though it's read as an u16 in the driver.

Let's update the driver to take into consideration that the
'vsc8531,vddmac' property is of the default type u32.

Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/mscc.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/phy/mscc.c b/drivers/net/phy/mscc.c
index 84ca9ff40ae0b..53d63a71a03e2 100644
--- a/drivers/net/phy/mscc.c
+++ b/drivers/net/phy/mscc.c
@@ -111,7 +111,7 @@ struct vsc8531_private {
 
 #ifdef CONFIG_OF_MDIO
 struct vsc8531_edge_rate_table {
-	u16 vddmac;
+	u32 vddmac;
 	u8 slowdown[8];
 };
 
@@ -376,7 +376,7 @@ out_unlock:
 static int vsc85xx_edge_rate_magic_get(struct phy_device *phydev)
 {
 	u8 sd;
-	u16 vdd;
+	u32 vdd;
 	int rc, i, j;
 	struct device *dev = &phydev->mdio.dev;
 	struct device_node *of_node = dev->of_node;
@@ -385,7 +385,7 @@ static int vsc85xx_edge_rate_magic_get(struct phy_device *phydev)
 	if (!of_node)
 		return -ENODEV;
 
-	rc = of_property_read_u16(of_node, "vsc8531,vddmac", &vdd);
+	rc = of_property_read_u32(of_node, "vsc8531,vddmac", &vdd);
 	if (rc != 0)
 		vdd = MSCC_VDDMAC_3300;
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 077/205] net: phy: mscc: read 'vsc8531, edge-slowdown' as an u32

[Sasha Levin]

From: Quentin Schulz <quentin.schulz@bootlin.com>

[ Upstream commit 36c53cf0f46526b898390659b125155939f67892 ]

In the DT binding, it is specified nowhere that 'vsc8531,edge-slowdown'
is an u8, even though it's read as an u8 in the driver.

Let's update the driver to take into consideration that the
'vsc8531,edge-slowdown' property is of the default type u32.

Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/phy/mscc.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/net/phy/mscc.c b/drivers/net/phy/mscc.c
index 53d63a71a03e2..36647b70b9a36 100644
--- a/drivers/net/phy/mscc.c
+++ b/drivers/net/phy/mscc.c
@@ -112,7 +112,7 @@ struct vsc8531_private {
 #ifdef CONFIG_OF_MDIO
 struct vsc8531_edge_rate_table {
 	u32 vddmac;
-	u8 slowdown[8];
+	u32 slowdown[8];
 };
 
 static const struct vsc8531_edge_rate_table edge_table[] = {
@@ -375,8 +375,7 @@ out_unlock:
 #ifdef CONFIG_OF_MDIO
 static int vsc85xx_edge_rate_magic_get(struct phy_device *phydev)
 {
-	u8 sd;
-	u32 vdd;
+	u32 vdd, sd;
 	int rc, i, j;
 	struct device *dev = &phydev->mdio.dev;
 	struct device_node *of_node = dev->of_node;
@@ -389,7 +388,7 @@ static int vsc85xx_edge_rate_magic_get(struct phy_device *phydev)
 	if (rc != 0)
 		vdd = MSCC_VDDMAC_3300;
 
-	rc = of_property_read_u8(of_node, "vsc8531,edge-slowdown", &sd);
+	rc = of_property_read_u32(of_node, "vsc8531,edge-slowdown", &sd);
 	if (rc != 0)
 		sd = 0;
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 078/205] ARM: dts: meson8: fix the clock controller register size

[Sasha Levin]

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit f7f9da89bc4f61e33f7b9f5c75c4efdc1f0455d8 ]

The clock controller registers are not 0x460 wide because the reset
controller starts at CBUS 0x4404. This currently overlaps with the
clock controller (which is at CBUS 0x4000).

There is no public documentation available on the actual size of the
clock controller's register area (also called "HHI"). However, in
Amlogic's GPL kernel sources the last "HHI" register is
HHI_HDMI_PHY_CNTL2 at CBUS + 0x43a8. 0x400 was chosen because that size
doesn't seem unlikely.

Fixes: 2c323c43a3d619 ("ARM: dts: meson8: add and use the real clock controller")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/meson8.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index d77dcf890cfc8..7162e0ca05b0a 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -194,7 +194,7 @@
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 		compatible = "amlogic,meson8-clkc";
-		reg = <0x8000 0x4>, <0x4000 0x460>;
+		reg = <0x8000 0x4>, <0x4000 0x400>;
 	};
 
 	reset: reset-controller@4404 {
-- 
2.20.1

[PATCH AUTOSEL 4.19 078/205] ARM: dts: meson8: fix the clock controller register size

[Sasha Levin]

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit f7f9da89bc4f61e33f7b9f5c75c4efdc1f0455d8 ]

The clock controller registers are not 0x460 wide because the reset
controller starts at CBUS 0x4404. This currently overlaps with the
clock controller (which is at CBUS 0x4000).

There is no public documentation available on the actual size of the
clock controller's register area (also called "HHI"). However, in
Amlogic's GPL kernel sources the last "HHI" register is
HHI_HDMI_PHY_CNTL2 at CBUS + 0x43a8. 0x400 was chosen because that size
doesn't seem unlikely.

Fixes: 2c323c43a3d619 ("ARM: dts: meson8: add and use the real clock controller")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/meson8.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index d77dcf890cfc8..7162e0ca05b0a 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -194,7 +194,7 @@
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 		compatible = "amlogic,meson8-clkc";
-		reg = <0x8000 0x4>, <0x4000 0x460>;
+		reg = <0x8000 0x4>, <0x4000 0x400>;
 	};
 
 	reset: reset-controller@4404 {
-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH AUTOSEL 4.19 079/205] ARM: dts: meson8b: fix the clock controller register size

[Sasha Levin]

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit f31094fe8c16fbd2ca47921acf93b744b045aace ]

The clock controller registers are not 0x460 wide because the reset
controller starts at CBUS 0x4404. This currently overlaps with the
clock controller (which is at CBUS 0x4000).

There is no public documentation available on the actual size of the
clock controller's register area (also called "HHI"). However, in
Amlogic's GPL kernel sources the last "HHI" register is
HHI_HDMI_PHY_CNTL2 at CBUS + 0x43a8. 0x400 was chosen because that size
doesn't seem unlikely.

Fixes: 4a69fcd3a10803 ("ARM: meson: Add DTS for Odroid-C1 and Tronfy MXQ boards")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/meson8b.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index 5b3e5c50c72f7..4293047a4b76b 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -163,7 +163,7 @@
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 		compatible = "amlogic,meson8b-clkc";
-		reg = <0x8000 0x4>, <0x4000 0x460>;
+		reg = <0x8000 0x4>, <0x4000 0x400>;
 	};
 
 	reset: reset-controller@4404 {
-- 
2.20.1

[PATCH AUTOSEL 4.19 079/205] ARM: dts: meson8b: fix the clock controller register size

[Sasha Levin]

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit f31094fe8c16fbd2ca47921acf93b744b045aace ]

The clock controller registers are not 0x460 wide because the reset
controller starts at CBUS 0x4404. This currently overlaps with the
clock controller (which is at CBUS 0x4000).

There is no public documentation available on the actual size of the
clock controller's register area (also called "HHI"). However, in
Amlogic's GPL kernel sources the last "HHI" register is
HHI_HDMI_PHY_CNTL2 at CBUS + 0x43a8. 0x400 was chosen because that size
doesn't seem unlikely.

Fixes: 4a69fcd3a10803 ("ARM: meson: Add DTS for Odroid-C1 and Tronfy MXQ boards")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/meson8b.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index 5b3e5c50c72f7..4293047a4b76b 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -163,7 +163,7 @@
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 		compatible = "amlogic,meson8b-clkc";
-		reg = <0x8000 0x4>, <0x4000 0x460>;
+		reg = <0x8000 0x4>, <0x4000 0x400>;
 	};
 
 	reset: reset-controller@4404 {
-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH AUTOSEL 4.19 080/205] mtd: rawnand: marvell: use regmap_update_bits() for syscon access

[Sasha Levin]

From: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

[ Upstream commit 88aa3bbfc020d14b13d67af3f5c08aa992d82cd8 ]

The marvell_nfc_init() function fiddles with some bits of a system
controller on Armada 7K/8K. However, it does a read/modify/write
sequence on GENCONF_CLK_GATING_CTRL and GENCONF_ND_CLK_CTRL, which
isn't safe from a concurrency point of view, as the regmap lock isn't
taken accross the read/modify/write sequence. To solve this issue, use
regmap_update_bits().

While at it, since the "reg" variable is no longer needed for the
read/modify/write sequences, get rid of it for the regmap_write() to
GENCONF_SOC_DEVICE_MUX, and directly pass the value to be written as
argument.

Fixes: 02f26ecf8c772 ("mtd: nand: add reworked Marvell NAND controller driver")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mtd/nand/raw/marvell_nand.c | 23 +++++++++++------------
 1 file changed, 11 insertions(+), 12 deletions(-)

diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
index 9c90695a885fe..7a84a8f05b46d 100644
--- a/drivers/mtd/nand/raw/marvell_nand.c
+++ b/drivers/mtd/nand/raw/marvell_nand.c
@@ -2710,24 +2710,23 @@ static int marvell_nfc_init(struct marvell_nfc *nfc)
 		struct regmap *sysctrl_base =
 			syscon_regmap_lookup_by_phandle(np,
 							"marvell,system-controller");
-		u32 reg;
 
 		if (IS_ERR(sysctrl_base))
 			return PTR_ERR(sysctrl_base);
 
-		reg = GENCONF_SOC_DEVICE_MUX_NFC_EN |
-		      GENCONF_SOC_DEVICE_MUX_ECC_CLK_RST |
-		      GENCONF_SOC_DEVICE_MUX_ECC_CORE_RST |
-		      GENCONF_SOC_DEVICE_MUX_NFC_INT_EN;
-		regmap_write(sysctrl_base, GENCONF_SOC_DEVICE_MUX, reg);
+		regmap_write(sysctrl_base, GENCONF_SOC_DEVICE_MUX,
+			     GENCONF_SOC_DEVICE_MUX_NFC_EN |
+			     GENCONF_SOC_DEVICE_MUX_ECC_CLK_RST |
+			     GENCONF_SOC_DEVICE_MUX_ECC_CORE_RST |
+			     GENCONF_SOC_DEVICE_MUX_NFC_INT_EN);
 
-		regmap_read(sysctrl_base, GENCONF_CLK_GATING_CTRL, &reg);
-		reg |= GENCONF_CLK_GATING_CTRL_ND_GATE;
-		regmap_write(sysctrl_base, GENCONF_CLK_GATING_CTRL, reg);
+		regmap_update_bits(sysctrl_base, GENCONF_CLK_GATING_CTRL,
+				   GENCONF_CLK_GATING_CTRL_ND_GATE,
+				   GENCONF_CLK_GATING_CTRL_ND_GATE);
 
-		regmap_read(sysctrl_base, GENCONF_ND_CLK_CTRL, &reg);
-		reg |= GENCONF_ND_CLK_CTRL_EN;
-		regmap_write(sysctrl_base, GENCONF_ND_CLK_CTRL, reg);
+		regmap_update_bits(sysctrl_base, GENCONF_ND_CLK_CTRL,
+				   GENCONF_ND_CLK_CTRL_EN,
+				   GENCONF_ND_CLK_CTRL_EN);
 	}
 
 	/* Configure the DMA if appropriate */
-- 
2.20.1

[PATCH AUTOSEL 4.19 080/205] mtd: rawnand: marvell: use regmap_update_bits() for syscon access

[Sasha Levin]

From: Thomas Petazzoni <thomas.petazzoni@bootlin.com>

[ Upstream commit 88aa3bbfc020d14b13d67af3f5c08aa992d82cd8 ]

The marvell_nfc_init() function fiddles with some bits of a system
controller on Armada 7K/8K. However, it does a read/modify/write
sequence on GENCONF_CLK_GATING_CTRL and GENCONF_ND_CLK_CTRL, which
isn't safe from a concurrency point of view, as the regmap lock isn't
taken accross the read/modify/write sequence. To solve this issue, use
regmap_update_bits().

While at it, since the "reg" variable is no longer needed for the
read/modify/write sequences, get rid of it for the regmap_write() to
GENCONF_SOC_DEVICE_MUX, and directly pass the value to be written as
argument.

Fixes: 02f26ecf8c772 ("mtd: nand: add reworked Marvell NAND controller driver")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mtd/nand/raw/marvell_nand.c | 23 +++++++++++------------
 1 file changed, 11 insertions(+), 12 deletions(-)

diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
index 9c90695a885fe..7a84a8f05b46d 100644
--- a/drivers/mtd/nand/raw/marvell_nand.c
+++ b/drivers/mtd/nand/raw/marvell_nand.c
@@ -2710,24 +2710,23 @@ static int marvell_nfc_init(struct marvell_nfc *nfc)
 		struct regmap *sysctrl_base =
 			syscon_regmap_lookup_by_phandle(np,
 							"marvell,system-controller");
-		u32 reg;
 
 		if (IS_ERR(sysctrl_base))
 			return PTR_ERR(sysctrl_base);
 
-		reg = GENCONF_SOC_DEVICE_MUX_NFC_EN |
-		      GENCONF_SOC_DEVICE_MUX_ECC_CLK_RST |
-		      GENCONF_SOC_DEVICE_MUX_ECC_CORE_RST |
-		      GENCONF_SOC_DEVICE_MUX_NFC_INT_EN;
-		regmap_write(sysctrl_base, GENCONF_SOC_DEVICE_MUX, reg);
+		regmap_write(sysctrl_base, GENCONF_SOC_DEVICE_MUX,
+			     GENCONF_SOC_DEVICE_MUX_NFC_EN |
+			     GENCONF_SOC_DEVICE_MUX_ECC_CLK_RST |
+			     GENCONF_SOC_DEVICE_MUX_ECC_CORE_RST |
+			     GENCONF_SOC_DEVICE_MUX_NFC_INT_EN);
 
-		regmap_read(sysctrl_base, GENCONF_CLK_GATING_CTRL, &reg);
-		reg |= GENCONF_CLK_GATING_CTRL_ND_GATE;
-		regmap_write(sysctrl_base, GENCONF_CLK_GATING_CTRL, reg);
+		regmap_update_bits(sysctrl_base, GENCONF_CLK_GATING_CTRL,
+				   GENCONF_CLK_GATING_CTRL_ND_GATE,
+				   GENCONF_CLK_GATING_CTRL_ND_GATE);
 
-		regmap_read(sysctrl_base, GENCONF_ND_CLK_CTRL, &reg);
-		reg |= GENCONF_ND_CLK_CTRL_EN;
-		regmap_write(sysctrl_base, GENCONF_ND_CLK_CTRL, reg);
+		regmap_update_bits(sysctrl_base, GENCONF_ND_CLK_CTRL,
+				   GENCONF_ND_CLK_CTRL_EN,
+				   GENCONF_ND_CLK_CTRL_EN);
 	}
 
 	/* Configure the DMA if appropriate */
-- 
2.20.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH AUTOSEL 4.19 081/205] mtd: rawnand: fsl_ifc: check result of SRAM initialization

[Sasha Levin]

From: Kurt Kanzenbach <kurt@linutronix.de>

[ Upstream commit 434655af6a187129d8114640443b27d2cecfb979 ]

The SRAM initialization might fail. If that happens further NAND operations
won't be successful. Therefore, the chip init routine should fail if the SRAM
initialization didn't work.

Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mtd/nand/raw/fsl_ifc_nand.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/nand/raw/fsl_ifc_nand.c b/drivers/mtd/nand/raw/fsl_ifc_nand.c
index 24f59d0066afd..e4f5792dc5893 100644
--- a/drivers/mtd/nand/raw/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/raw/fsl_ifc_nand.c
@@ -761,7 +761,7 @@ static const struct nand_controller_ops fsl_ifc_controller_ops = {
 	.attach_chip = fsl_ifc_attach_chip,
 };
 
-static void fsl_ifc_sram_init(struct fsl_ifc_mtd *priv)
+static int fsl_ifc_sram_init(struct fsl_ifc_mtd *priv)
 {
 	struct fsl_ifc_ctrl *ctrl = priv->ctrl;
 	struct fsl_ifc_runtime __iomem *ifc_runtime = ctrl->rregs;
@@ -805,12 +805,16 @@ static void fsl_ifc_sram_init(struct fsl_ifc_mtd *priv)
 	wait_event_timeout(ctrl->nand_wait, ctrl->nand_stat,
 			   msecs_to_jiffies(IFC_TIMEOUT_MSECS));
 
-	if (ctrl->nand_stat != IFC_NAND_EVTER_STAT_OPC)
+	if (ctrl->nand_stat != IFC_NAND_EVTER_STAT_OPC) {
 		pr_err("fsl-ifc: Failed to Initialise SRAM\n");
+		return -ETIMEDOUT;
+	}
 
 	/* Restore CSOR and CSOR_ext */
 	ifc_out32(csor, &ifc_global->csor_cs[cs].csor);
 	ifc_out32(csor_ext, &ifc_global->csor_cs[cs].csor_ext);
+
+	return 0;
 }
 
 static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
@@ -914,8 +918,13 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
 		chip->ecc.algo = NAND_ECC_HAMMING;
 	}
 
-	if (ctrl->version >= FSL_IFC_VERSION_1_1_0)
-		fsl_ifc_sram_init(priv);
+	if (ctrl->version >= FSL_IFC_VERSION_1_1_0) {
+		int ret;
+
+		ret = fsl_ifc_sram_init(priv);
+		if (ret)
+			return ret;
+	}
 
 	/*
 	 * As IFC version 2.0.0 has 16KB of internal SRAM as compared to older
-- 
2.20.1

[PATCH AUTOSEL 4.19 081/205] mtd: rawnand: fsl_ifc: check result of SRAM initialization

[Sasha Levin]

From: Kurt Kanzenbach <kurt@linutronix.de>

[ Upstream commit 434655af6a187129d8114640443b27d2cecfb979 ]

The SRAM initialization might fail. If that happens further NAND operations
won't be successful. Therefore, the chip init routine should fail if the SRAM
initialization didn't work.

Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mtd/nand/raw/fsl_ifc_nand.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/nand/raw/fsl_ifc_nand.c b/drivers/mtd/nand/raw/fsl_ifc_nand.c
index 24f59d0066afd..e4f5792dc5893 100644
--- a/drivers/mtd/nand/raw/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/raw/fsl_ifc_nand.c
@@ -761,7 +761,7 @@ static const struct nand_controller_ops fsl_ifc_controller_ops = {
 	.attach_chip = fsl_ifc_attach_chip,
 };
 
-static void fsl_ifc_sram_init(struct fsl_ifc_mtd *priv)
+static int fsl_ifc_sram_init(struct fsl_ifc_mtd *priv)
 {
 	struct fsl_ifc_ctrl *ctrl = priv->ctrl;
 	struct fsl_ifc_runtime __iomem *ifc_runtime = ctrl->rregs;
@@ -805,12 +805,16 @@ static void fsl_ifc_sram_init(struct fsl_ifc_mtd *priv)
 	wait_event_timeout(ctrl->nand_wait, ctrl->nand_stat,
 			   msecs_to_jiffies(IFC_TIMEOUT_MSECS));
 
-	if (ctrl->nand_stat != IFC_NAND_EVTER_STAT_OPC)
+	if (ctrl->nand_stat != IFC_NAND_EVTER_STAT_OPC) {
 		pr_err("fsl-ifc: Failed to Initialise SRAM\n");
+		return -ETIMEDOUT;
+	}
 
 	/* Restore CSOR and CSOR_ext */
 	ifc_out32(csor, &ifc_global->csor_cs[cs].csor);
 	ifc_out32(csor_ext, &ifc_global->csor_cs[cs].csor_ext);
+
+	return 0;
 }
 
 static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
@@ -914,8 +918,13 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
 		chip->ecc.algo = NAND_ECC_HAMMING;
 	}
 
-	if (ctrl->version >= FSL_IFC_VERSION_1_1_0)
-		fsl_ifc_sram_init(priv);
+	if (ctrl->version >= FSL_IFC_VERSION_1_1_0) {
+		int ret;
+
+		ret = fsl_ifc_sram_init(priv);
+		if (ret)
+			return ret;
+	}
 
 	/*
 	 * As IFC version 2.0.0 has 16KB of internal SRAM as compared to older
-- 
2.20.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH AUTOSEL 4.19 082/205] mtd: rawnand: fsl_ifc: fixup SRAM init for newer ctrl versions

[Sasha Levin]

From: Kurt Kanzenbach <kurt@linutronix.de>

[ Upstream commit ff8648f29fe58c2d94d32a076d2de7b92be4b485 ]

Newer versions of the IFC controller use a different method of initializing the
internal SRAM: Instead of reading from flash, a bit in the NAND configuration
register has to be set in order to trigger the self-initializing process.

Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mtd/nand/raw/fsl_ifc_nand.c | 33 +++++++++++++++++++++++------
 include/linux/fsl_ifc.h             |  2 ++
 2 files changed, 28 insertions(+), 7 deletions(-)

diff --git a/drivers/mtd/nand/raw/fsl_ifc_nand.c b/drivers/mtd/nand/raw/fsl_ifc_nand.c
index e4f5792dc5893..7e7729df78278 100644
--- a/drivers/mtd/nand/raw/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/raw/fsl_ifc_nand.c
@@ -30,6 +30,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand_ecc.h>
 #include <linux/fsl_ifc.h>
+#include <linux/iopoll.h>
 
 #define ERR_BYTE		0xFF /* Value returned for read
 					bytes when read failed	*/
@@ -769,6 +770,27 @@ static int fsl_ifc_sram_init(struct fsl_ifc_mtd *priv)
 	uint32_t csor = 0, csor_8k = 0, csor_ext = 0;
 	uint32_t cs = priv->bank;
 
+	if (ctrl->version < FSL_IFC_VERSION_1_1_0)
+		return 0;
+
+	if (ctrl->version > FSL_IFC_VERSION_1_1_0) {
+		u32 ncfgr, status;
+		int ret;
+
+		/* Trigger auto initialization */
+		ncfgr = ifc_in32(&ifc_runtime->ifc_nand.ncfgr);
+		ifc_out32(ncfgr | IFC_NAND_NCFGR_SRAM_INIT_EN, &ifc_runtime->ifc_nand.ncfgr);
+
+		/* Wait until done */
+		ret = readx_poll_timeout(ifc_in32, &ifc_runtime->ifc_nand.ncfgr,
+					 status, !(status & IFC_NAND_NCFGR_SRAM_INIT_EN),
+					 10, IFC_TIMEOUT_MSECS * 1000);
+		if (ret)
+			dev_err(priv->dev, "Failed to initialize SRAM!\n");
+
+		return ret;
+	}
+
 	/* Save CSOR and CSOR_ext */
 	csor = ifc_in32(&ifc_global->csor_cs[cs].csor);
 	csor_ext = ifc_in32(&ifc_global->csor_cs[cs].csor_ext);
@@ -825,6 +847,7 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
 	struct nand_chip *chip = &priv->chip;
 	struct mtd_info *mtd = nand_to_mtd(&priv->chip);
 	u32 csor;
+	int ret;
 
 	/* Fill in fsl_ifc_mtd structure */
 	mtd->dev.parent = priv->dev;
@@ -918,13 +941,9 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
 		chip->ecc.algo = NAND_ECC_HAMMING;
 	}
 
-	if (ctrl->version >= FSL_IFC_VERSION_1_1_0) {
-		int ret;
-
-		ret = fsl_ifc_sram_init(priv);
-		if (ret)
-			return ret;
-	}
+	ret = fsl_ifc_sram_init(priv);
+	if (ret)
+		return ret;
 
 	/*
 	 * As IFC version 2.0.0 has 16KB of internal SRAM as compared to older
diff --git a/include/linux/fsl_ifc.h b/include/linux/fsl_ifc.h
index 3fdfede2f0f3e..5f343b796ad95 100644
--- a/include/linux/fsl_ifc.h
+++ b/include/linux/fsl_ifc.h
@@ -274,6 +274,8 @@
  */
 /* Auto Boot Mode */
 #define IFC_NAND_NCFGR_BOOT		0x80000000
+/* SRAM Initialization */
+#define IFC_NAND_NCFGR_SRAM_INIT_EN	0x20000000
 /* Addressing Mode-ROW0+n/COL0 */
 #define IFC_NAND_NCFGR_ADDR_MODE_RC0	0x00000000
 /* Addressing Mode-ROW0+n/COL0+n */
-- 
2.20.1

[PATCH AUTOSEL 4.19 082/205] mtd: rawnand: fsl_ifc: fixup SRAM init for newer ctrl versions

[Sasha Levin]

From: Kurt Kanzenbach <kurt@linutronix.de>

[ Upstream commit ff8648f29fe58c2d94d32a076d2de7b92be4b485 ]

Newer versions of the IFC controller use a different method of initializing the
internal SRAM: Instead of reading from flash, a bit in the NAND configuration
register has to be set in order to trigger the self-initializing process.

Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mtd/nand/raw/fsl_ifc_nand.c | 33 +++++++++++++++++++++++------
 include/linux/fsl_ifc.h             |  2 ++
 2 files changed, 28 insertions(+), 7 deletions(-)

diff --git a/drivers/mtd/nand/raw/fsl_ifc_nand.c b/drivers/mtd/nand/raw/fsl_ifc_nand.c
index e4f5792dc5893..7e7729df78278 100644
--- a/drivers/mtd/nand/raw/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/raw/fsl_ifc_nand.c
@@ -30,6 +30,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand_ecc.h>
 #include <linux/fsl_ifc.h>
+#include <linux/iopoll.h>
 
 #define ERR_BYTE		0xFF /* Value returned for read
 					bytes when read failed	*/
@@ -769,6 +770,27 @@ static int fsl_ifc_sram_init(struct fsl_ifc_mtd *priv)
 	uint32_t csor = 0, csor_8k = 0, csor_ext = 0;
 	uint32_t cs = priv->bank;
 
+	if (ctrl->version < FSL_IFC_VERSION_1_1_0)
+		return 0;
+
+	if (ctrl->version > FSL_IFC_VERSION_1_1_0) {
+		u32 ncfgr, status;
+		int ret;
+
+		/* Trigger auto initialization */
+		ncfgr = ifc_in32(&ifc_runtime->ifc_nand.ncfgr);
+		ifc_out32(ncfgr | IFC_NAND_NCFGR_SRAM_INIT_EN, &ifc_runtime->ifc_nand.ncfgr);
+
+		/* Wait until done */
+		ret = readx_poll_timeout(ifc_in32, &ifc_runtime->ifc_nand.ncfgr,
+					 status, !(status & IFC_NAND_NCFGR_SRAM_INIT_EN),
+					 10, IFC_TIMEOUT_MSECS * 1000);
+		if (ret)
+			dev_err(priv->dev, "Failed to initialize SRAM!\n");
+
+		return ret;
+	}
+
 	/* Save CSOR and CSOR_ext */
 	csor = ifc_in32(&ifc_global->csor_cs[cs].csor);
 	csor_ext = ifc_in32(&ifc_global->csor_cs[cs].csor_ext);
@@ -825,6 +847,7 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
 	struct nand_chip *chip = &priv->chip;
 	struct mtd_info *mtd = nand_to_mtd(&priv->chip);
 	u32 csor;
+	int ret;
 
 	/* Fill in fsl_ifc_mtd structure */
 	mtd->dev.parent = priv->dev;
@@ -918,13 +941,9 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
 		chip->ecc.algo = NAND_ECC_HAMMING;
 	}
 
-	if (ctrl->version >= FSL_IFC_VERSION_1_1_0) {
-		int ret;
-
-		ret = fsl_ifc_sram_init(priv);
-		if (ret)
-			return ret;
-	}
+	ret = fsl_ifc_sram_init(priv);
+	if (ret)
+		return ret;
 
 	/*
 	 * As IFC version 2.0.0 has 16KB of internal SRAM as compared to older
diff --git a/include/linux/fsl_ifc.h b/include/linux/fsl_ifc.h
index 3fdfede2f0f3e..5f343b796ad95 100644
--- a/include/linux/fsl_ifc.h
+++ b/include/linux/fsl_ifc.h
@@ -274,6 +274,8 @@
  */
 /* Auto Boot Mode */
 #define IFC_NAND_NCFGR_BOOT		0x80000000
+/* SRAM Initialization */
+#define IFC_NAND_NCFGR_SRAM_INIT_EN	0x20000000
 /* Addressing Mode-ROW0+n/COL0 */
 #define IFC_NAND_NCFGR_ADDR_MODE_RC0	0x00000000
 /* Addressing Mode-ROW0+n/COL0+n */
-- 
2.20.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH AUTOSEL 4.19 083/205] mtd: rawnand: qcom: don't include dma-direct.h

[Sasha Levin]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit ab0fb17c7d46406e1aac2dda265874751946626d ]

A recent commit removed the incorrect use of phys_to_dma from this
driver, but failed to remove the dma-direct.h include, so do that
now.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mtd/nand/raw/qcom_nandc.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index 880e75f63a19b..07d8750313fd6 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -23,7 +23,6 @@
 #include <linux/of_device.h>
 #include <linux/delay.h>
 #include <linux/dma/qcom_bam_dma.h>
-#include <linux/dma-direct.h> /* XXX: drivers shall never use this directly! */
 
 /* NANDc reg offsets */
 #define	NAND_FLASH_CMD			0x00
-- 
2.20.1

[PATCH AUTOSEL 4.19 083/205] mtd: rawnand: qcom: don't include dma-direct.h

[Sasha Levin]

From: Christoph Hellwig <hch@lst.de>

[ Upstream commit ab0fb17c7d46406e1aac2dda265874751946626d ]

A recent commit removed the incorrect use of phys_to_dma from this
driver, but failed to remove the dma-direct.h include, so do that
now.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/mtd/nand/raw/qcom_nandc.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index 880e75f63a19b..07d8750313fd6 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -23,7 +23,6 @@
 #include <linux/of_device.h>
 #include <linux/delay.h>
 #include <linux/dma/qcom_bam_dma.h>
-#include <linux/dma-direct.h> /* XXX: drivers shall never use this directly! */
 
 /* NANDc reg offsets */
 #define	NAND_FLASH_CMD			0x00
-- 
2.20.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

[PATCH AUTOSEL 4.19 084/205] IB/mlx5: Change TX affinity assignment in RoCE LAG mode

[Sasha Levin]

From: Majd Dibbiny <majd@mellanox.com>

[ Upstream commit c6a21c3864fc7f5febae7d096cd136f397c791f2 ]

In the current code, the TX affinity is per RoCE device, which can cause
unfairness between different contexts. e.g. if we open two contexts, and
each open 10 QPs concurrently, all of the QPs of the first context might
end up on the first port instead of distributed on the two ports as
expected

To overcome this unfairness between processes, we maintain per device TX
affinity, and per process TX affinity.

The allocation algorithm is as follow:

1. Hold two tx_port_affinity atomic variables, one per RoCE device and one
   per ucontext. Both initialized to 0.

2. In mlx5_ib_alloc_ucontext do:
 2.1. ucontext.tx_port_affinity = device.tx_port_affinity
 2.2. device.tx_port_affinity += 1

3. In modify QP INIT2RST:
 3.1. qp.tx_port_affinity = ucontext.tx_port_affinity % MLX5_PORT_NUM
 3.2. ucontext.tx_port_affinity += 1

Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/mlx5/main.c    |  8 ++++++
 drivers/infiniband/hw/mlx5/mlx5_ib.h |  4 ++-
 drivers/infiniband/hw/mlx5/qp.c      | 37 +++++++++++++++++++++++++---
 3 files changed, 44 insertions(+), 5 deletions(-)

diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c
index c05eae93170eb..f4ffdc588ea07 100644
--- a/drivers/infiniband/hw/mlx5/main.c
+++ b/drivers/infiniband/hw/mlx5/main.c
@@ -1823,6 +1823,14 @@ static struct ib_ucontext *mlx5_ib_alloc_ucontext(struct ib_device *ibdev,
 	context->lib_caps = req.lib_caps;
 	print_lib_caps(dev, context->lib_caps);
 
+	if (mlx5_lag_is_active(dev->mdev)) {
+		u8 port = mlx5_core_native_port_num(dev->mdev);
+
+		atomic_set(&context->tx_port_affinity,
+			   atomic_add_return(
+				   1, &dev->roce[port].tx_port_affinity));
+	}
+
 	return &context->ibucontext;
 
 out_mdev:
diff --git a/drivers/infiniband/hw/mlx5/mlx5_ib.h b/drivers/infiniband/hw/mlx5/mlx5_ib.h
index 941d1df54631a..6a060c84598fe 100644
--- a/drivers/infiniband/hw/mlx5/mlx5_ib.h
+++ b/drivers/infiniband/hw/mlx5/mlx5_ib.h
@@ -139,6 +139,8 @@ struct mlx5_ib_ucontext {
 	u64			lib_caps;
 	DECLARE_BITMAP(dm_pages, MLX5_MAX_MEMIC_PAGES);
 	u16			devx_uid;
+	/* For RoCE LAG TX affinity */
+	atomic_t		tx_port_affinity;
 };
 
 static inline struct mlx5_ib_ucontext *to_mucontext(struct ib_ucontext *ibucontext)
@@ -700,7 +702,7 @@ struct mlx5_roce {
 	rwlock_t		netdev_lock;
 	struct net_device	*netdev;
 	struct notifier_block	nb;
-	atomic_t		next_port;
+	atomic_t		tx_port_affinity;
 	enum ib_port_state last_port_state;
 	struct mlx5_ib_dev	*dev;
 	u8			native_port_num;
diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c
index 77b1f3fd086ad..69669c3b13d85 100644
--- a/drivers/infiniband/hw/mlx5/qp.c
+++ b/drivers/infiniband/hw/mlx5/qp.c
@@ -2908,6 +2908,37 @@ static int modify_raw_packet_qp(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp,
 	return 0;
 }
 
+static unsigned int get_tx_affinity(struct mlx5_ib_dev *dev,
+				    struct mlx5_ib_pd *pd,
+				    struct mlx5_ib_qp_base *qp_base,
+				    u8 port_num)
+{
+	struct mlx5_ib_ucontext *ucontext = NULL;
+	unsigned int tx_port_affinity;
+
+	if (pd && pd->ibpd.uobject && pd->ibpd.uobject->context)
+		ucontext = to_mucontext(pd->ibpd.uobject->context);
+
+	if (ucontext) {
+		tx_port_affinity = (unsigned int)atomic_add_return(
+					   1, &ucontext->tx_port_affinity) %
+					   MLX5_MAX_PORTS +
+				   1;
+		mlx5_ib_dbg(dev, "Set tx affinity 0x%x to qpn 0x%x ucontext %p\n",
+				tx_port_affinity, qp_base->mqp.qpn, ucontext);
+	} else {
+		tx_port_affinity =
+			(unsigned int)atomic_add_return(
+				1, &dev->roce[port_num].tx_port_affinity) %
+				MLX5_MAX_PORTS +
+			1;
+		mlx5_ib_dbg(dev, "Set tx affinity 0x%x to qpn 0x%x\n",
+				tx_port_affinity, qp_base->mqp.qpn);
+	}
+
+	return tx_port_affinity;
+}
+
 static int __mlx5_ib_modify_qp(struct ib_qp *ibqp,
 			       const struct ib_qp_attr *attr, int attr_mask,
 			       enum ib_qp_state cur_state, enum ib_qp_state new_state,
@@ -2973,6 +3004,7 @@ static int __mlx5_ib_modify_qp(struct ib_qp *ibqp,
 	if (!context)
 		return -ENOMEM;
 
+	pd = get_pd(qp);
 	context->flags = cpu_to_be32(mlx5_st << 16);
 
 	if (!(attr_mask & IB_QP_PATH_MIG_STATE)) {
@@ -3001,9 +3033,7 @@ static int __mlx5_ib_modify_qp(struct ib_qp *ibqp,
 		    (ibqp->qp_type == IB_QPT_XRC_TGT)) {
 			if (mlx5_lag_is_active(dev->mdev)) {
 				u8 p = mlx5_core_native_port_num(dev->mdev);
-				tx_affinity = (unsigned int)atomic_add_return(1,
-						&dev->roce[p].next_port) %
-						MLX5_MAX_PORTS + 1;
+				tx_affinity = get_tx_affinity(dev, pd, base, p);
 				context->flags |= cpu_to_be32(tx_affinity << 24);
 			}
 		}
@@ -3061,7 +3091,6 @@ static int __mlx5_ib_modify_qp(struct ib_qp *ibqp,
 			goto out;
 	}
 
-	pd = get_pd(qp);
 	get_cqs(qp->ibqp.qp_type, qp->ibqp.send_cq, qp->ibqp.recv_cq,
 		&send_cq, &recv_cq);
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 085/205] qxl: fix null-pointer crash during suspend

[Sasha Levin]

From: Peter Wu <peter@lekensteyn.nl>

[ Upstream commit 7948a2b15873319d1bff4d37c09b9f2bf87b9021 ]

"crtc->helper_private" is not initialized by the QXL driver and thus the
"crtc_funcs->disable" call would crash (resulting in suspend failure).
Fix this by converting the suspend/resume functions to use the
drm_mode_config_helper_* helpers.

Tested system sleep with QEMU 3.0 using "echo mem > /sys/power/state".
During suspend the following message is visible from QEMU:

    spice/server/display-channel.c:2425:display_channel_validate_surface: canvas address is 0x7fd05da68308 for 0 (and is NULL)
    spice/server/display-channel.c:2426:display_channel_validate_surface: failed on 0

This seems to be triggered by QXL_IO_NOTIFY_CMD after
QXL_IO_DESTROY_PRIMARY_ASYNC, but aside from the warning things still
seem to work (tested with both the GTK and -spice options).

Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Link: http://patchwork.freedesktop.org/patch/msgid/20180904202747.14968-1-peter@lekensteyn.nl
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/qxl/qxl_drv.c | 26 +++++---------------------
 1 file changed, 5 insertions(+), 21 deletions(-)

diff --git a/drivers/gpu/drm/qxl/qxl_drv.c b/drivers/gpu/drm/qxl/qxl_drv.c
index 2445e75cf7ea6..d00f45eed03ca 100644
--- a/drivers/gpu/drm/qxl/qxl_drv.c
+++ b/drivers/gpu/drm/qxl/qxl_drv.c
@@ -136,20 +136,11 @@ static int qxl_drm_freeze(struct drm_device *dev)
 {
 	struct pci_dev *pdev = dev->pdev;
 	struct qxl_device *qdev = dev->dev_private;
-	struct drm_crtc *crtc;
-
-	drm_kms_helper_poll_disable(dev);
-
-	console_lock();
-	qxl_fbdev_set_suspend(qdev, 1);
-	console_unlock();
+	int ret;
 
-	/* unpin the front buffers */
-	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
-		const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
-		if (crtc->enabled)
-			(*crtc_funcs->disable)(crtc);
-	}
+	ret = drm_mode_config_helper_suspend(dev);
+	if (ret)
+		return ret;
 
 	qxl_destroy_monitors_object(qdev);
 	qxl_surf_evict(qdev);
@@ -175,14 +166,7 @@ static int qxl_drm_resume(struct drm_device *dev, bool thaw)
 	}
 
 	qxl_create_monitors_object(qdev);
-	drm_helper_resume_force_mode(dev);
-
-	console_lock();
-	qxl_fbdev_set_suspend(qdev, 0);
-	console_unlock();
-
-	drm_kms_helper_poll_enable(dev);
-	return 0;
+	return drm_mode_config_helper_resume(dev);
 }
 
 static int qxl_pm_suspend(struct device *dev)
-- 
2.20.1

[PATCH AUTOSEL 4.19 085/205] qxl: fix null-pointer crash during suspend

[Sasha Levin]

From: Peter Wu <peter@lekensteyn.nl>

[ Upstream commit 7948a2b15873319d1bff4d37c09b9f2bf87b9021 ]

"crtc->helper_private" is not initialized by the QXL driver and thus the
"crtc_funcs->disable" call would crash (resulting in suspend failure).
Fix this by converting the suspend/resume functions to use the
drm_mode_config_helper_* helpers.

Tested system sleep with QEMU 3.0 using "echo mem > /sys/power/state".
During suspend the following message is visible from QEMU:

    spice/server/display-channel.c:2425:display_channel_validate_surface: canvas address is 0x7fd05da68308 for 0 (and is NULL)
    spice/server/display-channel.c:2426:display_channel_validate_surface: failed on 0

This seems to be triggered by QXL_IO_NOTIFY_CMD after
QXL_IO_DESTROY_PRIMARY_ASYNC, but aside from the warning things still
seem to work (tested with both the GTK and -spice options).

Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Link: http://patchwork.freedesktop.org/patch/msgid/20180904202747.14968-1-peter@lekensteyn.nl
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/qxl/qxl_drv.c | 26 +++++---------------------
 1 file changed, 5 insertions(+), 21 deletions(-)

diff --git a/drivers/gpu/drm/qxl/qxl_drv.c b/drivers/gpu/drm/qxl/qxl_drv.c
index 2445e75cf7ea6..d00f45eed03ca 100644
--- a/drivers/gpu/drm/qxl/qxl_drv.c
+++ b/drivers/gpu/drm/qxl/qxl_drv.c
@@ -136,20 +136,11 @@ static int qxl_drm_freeze(struct drm_device *dev)
 {
 	struct pci_dev *pdev = dev->pdev;
 	struct qxl_device *qdev = dev->dev_private;
-	struct drm_crtc *crtc;
-
-	drm_kms_helper_poll_disable(dev);
-
-	console_lock();
-	qxl_fbdev_set_suspend(qdev, 1);
-	console_unlock();
+	int ret;
 
-	/* unpin the front buffers */
-	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
-		const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
-		if (crtc->enabled)
-			(*crtc_funcs->disable)(crtc);
-	}
+	ret = drm_mode_config_helper_suspend(dev);
+	if (ret)
+		return ret;
 
 	qxl_destroy_monitors_object(qdev);
 	qxl_surf_evict(qdev);
@@ -175,14 +166,7 @@ static int qxl_drm_resume(struct drm_device *dev, bool thaw)
 	}
 
 	qxl_create_monitors_object(qdev);
-	drm_helper_resume_force_mode(dev);
-
-	console_lock();
-	qxl_fbdev_set_suspend(qdev, 0);
-	console_unlock();
-
-	drm_kms_helper_poll_enable(dev);
-	return 0;
+	return drm_mode_config_helper_resume(dev);
 }
 
 static int qxl_pm_suspend(struct device *dev)
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 4.19 085/205] qxl: fix null-pointer crash during suspend

[Sasha Levin]

From: Peter Wu <peter@lekensteyn.nl>

[ Upstream commit 7948a2b15873319d1bff4d37c09b9f2bf87b9021 ]

"crtc->helper_private" is not initialized by the QXL driver and thus the
"crtc_funcs->disable" call would crash (resulting in suspend failure).
Fix this by converting the suspend/resume functions to use the
drm_mode_config_helper_* helpers.

Tested system sleep with QEMU 3.0 using "echo mem > /sys/power/state".
During suspend the following message is visible from QEMU:

    spice/server/display-channel.c:2425:display_channel_validate_surface: canvas address is 0x7fd05da68308 for 0 (and is NULL)
    spice/server/display-channel.c:2426:display_channel_validate_surface: failed on 0

This seems to be triggered by QXL_IO_NOTIFY_CMD after
QXL_IO_DESTROY_PRIMARY_ASYNC, but aside from the warning things still
seem to work (tested with both the GTK and -spice options).

Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Link: http://patchwork.freedesktop.org/patch/msgid/20180904202747.14968-1-peter@lekensteyn.nl
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/qxl/qxl_drv.c | 26 +++++---------------------
 1 file changed, 5 insertions(+), 21 deletions(-)

diff --git a/drivers/gpu/drm/qxl/qxl_drv.c b/drivers/gpu/drm/qxl/qxl_drv.c
index 2445e75cf7ea6..d00f45eed03ca 100644
--- a/drivers/gpu/drm/qxl/qxl_drv.c
+++ b/drivers/gpu/drm/qxl/qxl_drv.c
@@ -136,20 +136,11 @@ static int qxl_drm_freeze(struct drm_device *dev)
 {
 	struct pci_dev *pdev = dev->pdev;
 	struct qxl_device *qdev = dev->dev_private;
-	struct drm_crtc *crtc;
-
-	drm_kms_helper_poll_disable(dev);
-
-	console_lock();
-	qxl_fbdev_set_suspend(qdev, 1);
-	console_unlock();
+	int ret;
 
-	/* unpin the front buffers */
-	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
-		const struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
-		if (crtc->enabled)
-			(*crtc_funcs->disable)(crtc);
-	}
+	ret = drm_mode_config_helper_suspend(dev);
+	if (ret)
+		return ret;
 
 	qxl_destroy_monitors_object(qdev);
 	qxl_surf_evict(qdev);
@@ -175,14 +166,7 @@ static int qxl_drm_resume(struct drm_device *dev, bool thaw)
 	}
 
 	qxl_create_monitors_object(qdev);
-	drm_helper_resume_force_mode(dev);
-
-	console_lock();
-	qxl_fbdev_set_suspend(qdev, 0);
-	console_unlock();
-
-	drm_kms_helper_poll_enable(dev);
-	return 0;
+	return drm_mode_config_helper_resume(dev);
 }
 
 static int qxl_pm_suspend(struct device *dev)
-- 
2.20.1

[PATCH AUTOSEL 4.19 086/205] mac80211: fix saving a few HE values

[Sasha Levin]

From: Naftali Goldstein <naftali.goldstein@intel.com>

[ Upstream commit 77cbbc35a49b75969d98edce9400beb21720aa39 ]

After masking the he_oper_params, to get the requested values as
integers one must rshift and not lshift.  Fix that by using the
le32_get_bits() macro.

Fixes: 41cbb0f5a295 ("mac80211: add support for HE")
Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com>
[converted to use le32_get_bits()]
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/mlme.c | 17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 5c9dcafbc3424..b0667467337d4 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -3255,19 +3255,16 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
 	}
 
 	if (bss_conf->he_support) {
-		u32 he_oper_params =
-			le32_to_cpu(elems.he_operation->he_oper_params);
+		bss_conf->bss_color =
+			le32_get_bits(elems.he_operation->he_oper_params,
+				      IEEE80211_HE_OPERATION_BSS_COLOR_MASK);
 
-		bss_conf->bss_color = he_oper_params &
-				      IEEE80211_HE_OPERATION_BSS_COLOR_MASK;
 		bss_conf->htc_trig_based_pkt_ext =
-			(he_oper_params &
-			 IEEE80211_HE_OPERATION_DFLT_PE_DURATION_MASK) <<
-			IEEE80211_HE_OPERATION_DFLT_PE_DURATION_OFFSET;
+			le32_get_bits(elems.he_operation->he_oper_params,
+			      IEEE80211_HE_OPERATION_DFLT_PE_DURATION_MASK);
 		bss_conf->frame_time_rts_th =
-			(he_oper_params &
-			 IEEE80211_HE_OPERATION_RTS_THRESHOLD_MASK) <<
-			IEEE80211_HE_OPERATION_RTS_THRESHOLD_OFFSET;
+			le32_get_bits(elems.he_operation->he_oper_params,
+			      IEEE80211_HE_OPERATION_RTS_THRESHOLD_MASK);
 
 		bss_conf->multi_sta_back_32bit =
 			sta->sta.he_cap.he_cap_elem.mac_cap_info[2] &
-- 
2.20.1

[PATCH AUTOSEL 4.19 087/205] cfg80211: validate wmm rule when setting

[Sasha Levin]

From: Stanislaw Gruszka <sgruszka@redhat.com>

[ Upstream commit 014f5a250fc49fa8c6cd50093e725e71f3ae52da ]

Add validation check for wmm rule when copy rules from fwdb and print
error when rule is invalid.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/reg.c | 64 +++++++++++++++++++++++++---------------------
 1 file changed, 35 insertions(+), 29 deletions(-)

diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 68ae97ef8bf0b..64841238df855 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -847,22 +847,36 @@ static bool valid_regdb(const u8 *data, unsigned int size)
 	return true;
 }
 
-static void set_wmm_rule(struct ieee80211_reg_rule *rrule,
-			 struct fwdb_wmm_rule *wmm)
-{
-	struct ieee80211_wmm_rule *rule = &rrule->wmm_rule;
-	unsigned int i;
+static void set_wmm_rule(const struct fwdb_header *db,
+			 const struct fwdb_country *country,
+			 const struct fwdb_rule *rule,
+			 struct ieee80211_reg_rule *rrule)
+{
+	struct ieee80211_wmm_rule *wmm_rule = &rrule->wmm_rule;
+	struct fwdb_wmm_rule *wmm;
+	unsigned int i, wmm_ptr;
+
+	wmm_ptr = be16_to_cpu(rule->wmm_ptr) << 2;
+	wmm = (void *)((u8 *)db + wmm_ptr);
+
+	if (!valid_wmm(wmm)) {
+		pr_err("Invalid regulatory WMM rule %u-%u in domain %c%c\n",
+		       be32_to_cpu(rule->start), be32_to_cpu(rule->end),
+		       country->alpha2[0], country->alpha2[1]);
+		return;
+	}
 
 	for (i = 0; i < IEEE80211_NUM_ACS; i++) {
-		rule->client[i].cw_min =
+		wmm_rule->client[i].cw_min =
 			ecw2cw((wmm->client[i].ecw & 0xf0) >> 4);
-		rule->client[i].cw_max = ecw2cw(wmm->client[i].ecw & 0x0f);
-		rule->client[i].aifsn =  wmm->client[i].aifsn;
-		rule->client[i].cot = 1000 * be16_to_cpu(wmm->client[i].cot);
-		rule->ap[i].cw_min = ecw2cw((wmm->ap[i].ecw & 0xf0) >> 4);
-		rule->ap[i].cw_max = ecw2cw(wmm->ap[i].ecw & 0x0f);
-		rule->ap[i].aifsn = wmm->ap[i].aifsn;
-		rule->ap[i].cot = 1000 * be16_to_cpu(wmm->ap[i].cot);
+		wmm_rule->client[i].cw_max = ecw2cw(wmm->client[i].ecw & 0x0f);
+		wmm_rule->client[i].aifsn =  wmm->client[i].aifsn;
+		wmm_rule->client[i].cot =
+			1000 * be16_to_cpu(wmm->client[i].cot);
+		wmm_rule->ap[i].cw_min = ecw2cw((wmm->ap[i].ecw & 0xf0) >> 4);
+		wmm_rule->ap[i].cw_max = ecw2cw(wmm->ap[i].ecw & 0x0f);
+		wmm_rule->ap[i].aifsn = wmm->ap[i].aifsn;
+		wmm_rule->ap[i].cot = 1000 * be16_to_cpu(wmm->ap[i].cot);
 	}
 
 	rrule->has_wmm = true;
@@ -870,7 +884,7 @@ static void set_wmm_rule(struct ieee80211_reg_rule *rrule,
 
 static int __regdb_query_wmm(const struct fwdb_header *db,
 			     const struct fwdb_country *country, int freq,
-			     struct ieee80211_reg_rule *rule)
+			     struct ieee80211_reg_rule *rrule)
 {
 	unsigned int ptr = be16_to_cpu(country->coll_ptr) << 2;
 	struct fwdb_collection *coll = (void *)((u8 *)db + ptr);
@@ -879,18 +893,14 @@ static int __regdb_query_wmm(const struct fwdb_header *db,
 	for (i = 0; i < coll->n_rules; i++) {
 		__be16 *rules_ptr = (void *)((u8 *)coll + ALIGN(coll->len, 2));
 		unsigned int rule_ptr = be16_to_cpu(rules_ptr[i]) << 2;
-		struct fwdb_rule *rrule = (void *)((u8 *)db + rule_ptr);
-		struct fwdb_wmm_rule *wmm;
-		unsigned int wmm_ptr;
+		struct fwdb_rule *rule = (void *)((u8 *)db + rule_ptr);
 
-		if (rrule->len < offsetofend(struct fwdb_rule, wmm_ptr))
+		if (rule->len < offsetofend(struct fwdb_rule, wmm_ptr))
 			continue;
 
-		if (freq >= KHZ_TO_MHZ(be32_to_cpu(rrule->start)) &&
-		    freq <= KHZ_TO_MHZ(be32_to_cpu(rrule->end))) {
-			wmm_ptr = be16_to_cpu(rrule->wmm_ptr) << 2;
-			wmm = (void *)((u8 *)db + wmm_ptr);
-			set_wmm_rule(rule, wmm);
+		if (freq >= KHZ_TO_MHZ(be32_to_cpu(rule->start)) &&
+		    freq <= KHZ_TO_MHZ(be32_to_cpu(rule->end))) {
+			set_wmm_rule(db, country, rule, rrule);
 			return 0;
 		}
 	}
@@ -972,12 +982,8 @@ static int regdb_query_country(const struct fwdb_header *db,
 		if (rule->len >= offsetofend(struct fwdb_rule, cac_timeout))
 			rrule->dfs_cac_ms =
 				1000 * be16_to_cpu(rule->cac_timeout);
-		if (rule->len >= offsetofend(struct fwdb_rule, wmm_ptr)) {
-			u32 wmm_ptr = be16_to_cpu(rule->wmm_ptr) << 2;
-			struct fwdb_wmm_rule *wmm = (void *)((u8 *)db + wmm_ptr);
-
-			set_wmm_rule(rrule, wmm);
-		}
+		if (rule->len >= offsetofend(struct fwdb_rule, wmm_ptr))
+			set_wmm_rule(db, country, rule, rrule);
 	}
 
 	return reg_schedule_apply(regdom);
-- 
2.20.1

[PATCH AUTOSEL 4.19 088/205] f2fs: avoid wrong decrypted data from disk

[Sasha Levin]

From: Jaegeuk Kim <jaegeuk@kernel.org>

[ Upstream commit 0ded69f632bb717be9aeea3ae74e29050fcb060c ]

1. Create a file in an encrypted directory
2. Do GC & drop caches
3. Read stale data before its bio for metapage was not issued yet

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/data.c    | 18 ++++++++++--------
 fs/f2fs/f2fs.h    |  2 +-
 fs/f2fs/file.c    |  3 +--
 fs/f2fs/segment.c |  6 +++++-
 4 files changed, 17 insertions(+), 12 deletions(-)

diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index 9511466bc7857..c61beaedf0789 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -575,9 +575,6 @@ static struct bio *f2fs_grab_read_bio(struct inode *inode, block_t blkaddr,
 		ctx->bio = bio;
 		ctx->enabled_steps = post_read_steps;
 		bio->bi_private = ctx;
-
-		/* wait the page to be moved by cleaning */
-		f2fs_wait_on_block_writeback(sbi, blkaddr);
 	}
 
 	return bio;
@@ -592,6 +589,9 @@ static int f2fs_submit_page_read(struct inode *inode, struct page *page,
 	if (IS_ERR(bio))
 		return PTR_ERR(bio);
 
+	/* wait for GCed page writeback via META_MAPPING */
+	f2fs_wait_on_block_writeback(inode, blkaddr);
+
 	if (bio_add_page(bio, page, PAGE_SIZE, 0) < PAGE_SIZE) {
 		bio_put(bio);
 		return -EFAULT;
@@ -1569,6 +1569,12 @@ submit_and_realloc:
 			}
 		}
 
+		/*
+		 * If the page is under writeback, we need to wait for
+		 * its completion to see the correct decrypted data.
+		 */
+		f2fs_wait_on_block_writeback(inode, block_nr);
+
 		if (bio_add_page(bio, page, blocksize, 0) < blocksize)
 			goto submit_and_realloc;
 
@@ -1637,7 +1643,7 @@ static int encrypt_one_page(struct f2fs_io_info *fio)
 		return 0;
 
 	/* wait for GCed page writeback via META_MAPPING */
-	f2fs_wait_on_block_writeback(fio->sbi, fio->old_blkaddr);
+	f2fs_wait_on_block_writeback(inode, fio->old_blkaddr);
 
 retry_encrypt:
 	fio->encrypted_page = fscrypt_encrypt_page(inode, fio->page,
@@ -2402,10 +2408,6 @@ repeat:
 
 	f2fs_wait_on_page_writeback(page, DATA, false);
 
-	/* wait for GCed page writeback via META_MAPPING */
-	if (f2fs_post_read_required(inode))
-		f2fs_wait_on_block_writeback(sbi, blkaddr);
-
 	if (len == PAGE_SIZE || PageUptodate(page))
 		return 0;
 
diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index fb216488d67a9..6d361c8c61306 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -2973,7 +2973,7 @@ void f2fs_allocate_data_block(struct f2fs_sb_info *sbi, struct page *page,
 			struct f2fs_io_info *fio, bool add_list);
 void f2fs_wait_on_page_writeback(struct page *page,
 			enum page_type type, bool ordered);
-void f2fs_wait_on_block_writeback(struct f2fs_sb_info *sbi, block_t blkaddr);
+void f2fs_wait_on_block_writeback(struct inode *inode, block_t blkaddr);
 void f2fs_write_data_summaries(struct f2fs_sb_info *sbi, block_t start_blk);
 void f2fs_write_node_summaries(struct f2fs_sb_info *sbi, block_t start_blk);
 int f2fs_lookup_journal_in_cursum(struct f2fs_journal *journal, int type,
diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index 8d1eb8dec6058..6972c6d7c3893 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -112,8 +112,7 @@ mapped:
 	f2fs_wait_on_page_writeback(page, DATA, false);
 
 	/* wait for GCed page writeback via META_MAPPING */
-	if (f2fs_post_read_required(inode))
-		f2fs_wait_on_block_writeback(sbi, dn.data_blkaddr);
+	f2fs_wait_on_block_writeback(inode, dn.data_blkaddr);
 
 out_sem:
 	up_read(&F2FS_I(inode)->i_mmap_sem);
diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
index 10d5dcdb34be6..d78009694f3fd 100644
--- a/fs/f2fs/segment.c
+++ b/fs/f2fs/segment.c
@@ -3214,10 +3214,14 @@ void f2fs_wait_on_page_writeback(struct page *page,
 	}
 }
 
-void f2fs_wait_on_block_writeback(struct f2fs_sb_info *sbi, block_t blkaddr)
+void f2fs_wait_on_block_writeback(struct inode *inode, block_t blkaddr)
 {
+	struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
 	struct page *cpage;
 
+	if (!f2fs_post_read_required(inode))
+		return;
+
 	if (!is_valid_data_blkaddr(sbi, blkaddr))
 		return;
 
-- 
2.20.1

[f2fs-dev] [PATCH AUTOSEL 4.19 088/205] f2fs: avoid wrong decrypted data from disk

[Sasha Levin]

From: Jaegeuk Kim <jaegeuk@kernel.org>

[ Upstream commit 0ded69f632bb717be9aeea3ae74e29050fcb060c ]

1. Create a file in an encrypted directory
2. Do GC & drop caches
3. Read stale data before its bio for metapage was not issued yet

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/data.c    | 18 ++++++++++--------
 fs/f2fs/f2fs.h    |  2 +-
 fs/f2fs/file.c    |  3 +--
 fs/f2fs/segment.c |  6 +++++-
 4 files changed, 17 insertions(+), 12 deletions(-)

diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index 9511466bc7857..c61beaedf0789 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -575,9 +575,6 @@ static struct bio *f2fs_grab_read_bio(struct inode *inode, block_t blkaddr,
 		ctx->bio = bio;
 		ctx->enabled_steps = post_read_steps;
 		bio->bi_private = ctx;
-
-		/* wait the page to be moved by cleaning */
-		f2fs_wait_on_block_writeback(sbi, blkaddr);
 	}
 
 	return bio;
@@ -592,6 +589,9 @@ static int f2fs_submit_page_read(struct inode *inode, struct page *page,
 	if (IS_ERR(bio))
 		return PTR_ERR(bio);
 
+	/* wait for GCed page writeback via META_MAPPING */
+	f2fs_wait_on_block_writeback(inode, blkaddr);
+
 	if (bio_add_page(bio, page, PAGE_SIZE, 0) < PAGE_SIZE) {
 		bio_put(bio);
 		return -EFAULT;
@@ -1569,6 +1569,12 @@ submit_and_realloc:
 			}
 		}
 
+		/*
+		 * If the page is under writeback, we need to wait for
+		 * its completion to see the correct decrypted data.
+		 */
+		f2fs_wait_on_block_writeback(inode, block_nr);
+
 		if (bio_add_page(bio, page, blocksize, 0) < blocksize)
 			goto submit_and_realloc;
 
@@ -1637,7 +1643,7 @@ static int encrypt_one_page(struct f2fs_io_info *fio)
 		return 0;
 
 	/* wait for GCed page writeback via META_MAPPING */
-	f2fs_wait_on_block_writeback(fio->sbi, fio->old_blkaddr);
+	f2fs_wait_on_block_writeback(inode, fio->old_blkaddr);
 
 retry_encrypt:
 	fio->encrypted_page = fscrypt_encrypt_page(inode, fio->page,
@@ -2402,10 +2408,6 @@ repeat:
 
 	f2fs_wait_on_page_writeback(page, DATA, false);
 
-	/* wait for GCed page writeback via META_MAPPING */
-	if (f2fs_post_read_required(inode))
-		f2fs_wait_on_block_writeback(sbi, blkaddr);
-
 	if (len == PAGE_SIZE || PageUptodate(page))
 		return 0;
 
diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index fb216488d67a9..6d361c8c61306 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -2973,7 +2973,7 @@ void f2fs_allocate_data_block(struct f2fs_sb_info *sbi, struct page *page,
 			struct f2fs_io_info *fio, bool add_list);
 void f2fs_wait_on_page_writeback(struct page *page,
 			enum page_type type, bool ordered);
-void f2fs_wait_on_block_writeback(struct f2fs_sb_info *sbi, block_t blkaddr);
+void f2fs_wait_on_block_writeback(struct inode *inode, block_t blkaddr);
 void f2fs_write_data_summaries(struct f2fs_sb_info *sbi, block_t start_blk);
 void f2fs_write_node_summaries(struct f2fs_sb_info *sbi, block_t start_blk);
 int f2fs_lookup_journal_in_cursum(struct f2fs_journal *journal, int type,
diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index 8d1eb8dec6058..6972c6d7c3893 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -112,8 +112,7 @@ mapped:
 	f2fs_wait_on_page_writeback(page, DATA, false);
 
 	/* wait for GCed page writeback via META_MAPPING */
-	if (f2fs_post_read_required(inode))
-		f2fs_wait_on_block_writeback(sbi, dn.data_blkaddr);
+	f2fs_wait_on_block_writeback(inode, dn.data_blkaddr);
 
 out_sem:
 	up_read(&F2FS_I(inode)->i_mmap_sem);
diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
index 10d5dcdb34be6..d78009694f3fd 100644
--- a/fs/f2fs/segment.c
+++ b/fs/f2fs/segment.c
@@ -3214,10 +3214,14 @@ void f2fs_wait_on_page_writeback(struct page *page,
 	}
 }
 
-void f2fs_wait_on_block_writeback(struct f2fs_sb_info *sbi, block_t blkaddr)
+void f2fs_wait_on_block_writeback(struct inode *inode, block_t blkaddr)
 {
+	struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
 	struct page *cpage;
 
+	if (!f2fs_post_read_required(inode))
+		return;
+
 	if (!is_valid_data_blkaddr(sbi, blkaddr))
 		return;
 
-- 
2.20.1



_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel

[PATCH AUTOSEL 4.19 089/205] net: lan78xx: Bail out if lan78xx_get_endpoints fails

[Sasha Levin]

From: Stefan Wahren <stefan.wahren@i2se.com>

[ Upstream commit fa8cd98c06407b5798b927cd7fd14d30f360ed02 ]

We need to bail out if lan78xx_get_endpoints() fails, otherwise the
result is overwritten.

Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Raghuram Chary Jallipalli <raghuramchary.jallipalli@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/lan78xx.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index e20266bd209e2..9e995767dbfe3 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -2947,6 +2947,11 @@ static int lan78xx_bind(struct lan78xx_net *dev, struct usb_interface *intf)
 	int i;
 
 	ret = lan78xx_get_endpoints(dev, intf);
+	if (ret) {
+		netdev_warn(dev->net, "lan78xx_get_endpoints failed: %d\n",
+			    ret);
+		return ret;
+	}
 
 	dev->data[0] = (unsigned long)kzalloc(sizeof(*pdata), GFP_KERNEL);
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 090/205] rtnetlink: move type calculation out of loop

[Sasha Levin]

From: Christian Brauner <christian@brauner.io>

[ Upstream commit 87ccbb1f943625884b824c5560f635dcea8e4510 ]

I don't see how the type - which is one of
RTM_{GETADDR,GETROUTE,GETNETCONF} - can change. So do the message type
calculation once before entering the for loop.

Signed-off-by: Christian Brauner <christian@brauner.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/core/rtnetlink.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index 3932eed379a40..a199bd85085da 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -3268,13 +3268,13 @@ static int rtnl_dump_all(struct sk_buff *skb, struct netlink_callback *cb)
 {
 	int idx;
 	int s_idx = cb->family;
+	int type = cb->nlh->nlmsg_type - RTM_BASE;
 
 	if (s_idx == 0)
 		s_idx = 1;
 
 	for (idx = 1; idx <= RTNL_FAMILY_MAX; idx++) {
 		struct rtnl_link **tab;
-		int type = cb->nlh->nlmsg_type-RTM_BASE;
 		struct rtnl_link *link;
 		rtnl_dumpit_func dumpit;
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 091/205] ASoC: sgtl5000: avoid division by zero if lo_vag is zero

[Sasha Levin]

From: Colin Ian King <colin.king@canonical.com>

[ Upstream commit 9ab708aef61f5620113269a9d1bdb1543d1207d0 ]

In the case where lo_vag <= SGTL5000_LINE_OUT_GND_BASE, lo_vag
is set to zero and later vol_quot is computed by dividing by
lo_vag causing a division by zero error.  Fix this by avoiding
a zero division and set vol_quot to zero in this specific case
so that the lowest setting for i is correctly set.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/sgtl5000.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index 64a52d495b1f5..896412d11a31c 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -1387,7 +1387,7 @@ static int sgtl5000_set_power_regs(struct snd_soc_component *component)
 	 * Searching for a suitable index solving this formula:
 	 * idx = 40 * log10(vag_val / lo_cagcntrl) + 15
 	 */
-	vol_quot = (vag * 100) / lo_vag;
+	vol_quot = lo_vag ? (vag * 100) / lo_vag : 0;
 	lo_vol = 0;
 	for (i = 0; i < ARRAY_SIZE(vol_quot_table); i++) {
 		if (vol_quot >= vol_quot_table[i])
-- 
2.20.1

[PATCH AUTOSEL 4.19 092/205] ath10k: avoid possible memory access violation

[Sasha Levin]

From: "K.T.VIJAYAKUMAAR" <vijay.bvb@samsung.com>

[ Upstream commit 97c69a70dc2cecb2c3b96a66529e0082dabc2d2c ]

array "ctl_power_table" access index "pream" is initialized with -1 and
is raised as a static analysis tool issue.
[drivers\net\wireless\ath\ath10k\wmi.c:4719] ->
[drivers\net\wireless\ath\ath10k\wmi.c:4730]: (error) Array index -1 is
out of bounds.

Since the "pream" index for accessing ctl_power_table array is initialized
with -1, there is a chance of memory access violation for the cases below.
1) wmi_pdev_tpc_final_table_event change frequency is between 2483 and 5180
2) pream_idx is out of the enumeration ranges of wmi_tpc_pream_2ghz,
wmi_tpc_pream_5ghz

Signed-off-by: K.T.VIJAYAKUMAAR <vijay.bvb@samsung.com>
[kvalo@codeaurora.org: clean up the warning message]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/wmi.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 9f31b9a108507..583147f00fa4e 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -4785,6 +4785,13 @@ ath10k_wmi_tpc_final_get_rate(struct ath10k *ar,
 		}
 	}
 
+	if (pream == -1) {
+		ath10k_warn(ar, "unknown wmi tpc final index and frequency: %u, %u\n",
+			    pream_idx, __le32_to_cpu(ev->chan_freq));
+		tpc = 0;
+		goto out;
+	}
+
 	if (pream == 4)
 		tpc = min_t(u8, ev->rates_array[rate_idx],
 			    ev->max_reg_allow_pow[ch]);
-- 
2.20.1

[PATCH AUTOSEL 4.19 092/205] ath10k: avoid possible memory access violation

[Sasha Levin]

From: "K.T.VIJAYAKUMAAR" <vijay.bvb@samsung.com>

[ Upstream commit 97c69a70dc2cecb2c3b96a66529e0082dabc2d2c ]

array "ctl_power_table" access index "pream" is initialized with -1 and
is raised as a static analysis tool issue.
[drivers\net\wireless\ath\ath10k\wmi.c:4719] ->
[drivers\net\wireless\ath\ath10k\wmi.c:4730]: (error) Array index -1 is
out of bounds.

Since the "pream" index for accessing ctl_power_table array is initialized
with -1, there is a chance of memory access violation for the cases below.
1) wmi_pdev_tpc_final_table_event change frequency is between 2483 and 5180
2) pream_idx is out of the enumeration ranges of wmi_tpc_pream_2ghz,
wmi_tpc_pream_5ghz

Signed-off-by: K.T.VIJAYAKUMAAR <vijay.bvb@samsung.com>
[kvalo@codeaurora.org: clean up the warning message]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/wmi.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 9f31b9a108507..583147f00fa4e 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -4785,6 +4785,13 @@ ath10k_wmi_tpc_final_get_rate(struct ath10k *ar,
 		}
 	}
 
+	if (pream == -1) {
+		ath10k_warn(ar, "unknown wmi tpc final index and frequency: %u, %u\n",
+			    pream_idx, __le32_to_cpu(ev->chan_freq));
+		tpc = 0;
+		goto out;
+	}
+
 	if (pream == 4)
 		tpc = min_t(u8, ev->rates_array[rate_idx],
 			    ev->max_reg_allow_pow[ch]);
-- 
2.20.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH AUTOSEL 4.19 093/205] ARM: dts: exynos: Disable pull control for S5M8767 PMIC

[Sasha Levin]

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit ef2ecab9af5feae97c47b7f61cdd96f7f49b2c23 ]

S5M8767 PMIC interrupt line on Exynos5250-based Arndale board has
external pull-up resistors, so disable any pull control for it in
in controller node. This fixes support for S5M8767 interrupts and
enables operation of wakeup from S5M8767 RTC alarm.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/exynos5250-arndale.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 9c8ab4b7fb2cf..4ab1f1c66c27f 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -170,6 +170,8 @@
 		reg = <0x66>;
 		interrupt-parent = <&gpx3>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&s5m8767_irq>;
 
 		vinb1-supply = <&main_dc_reg>;
 		vinb2-supply = <&main_dc_reg>;
@@ -530,6 +532,13 @@
 	cap-sd-highspeed;
 };
 
+&pinctrl_0 {
+	s5m8767_irq: s5m8767-irq {
+		samsung,pins = "gpx3-2";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
 &rtc {
 	status = "okay";
 };
-- 
2.20.1

[PATCH AUTOSEL 4.19 094/205] ath10k: wmi: disable softirq's while calling ieee80211_rx

[Sasha Levin]

From: Erik Stromdahl <erik.stromdahl@gmail.com>

[ Upstream commit 37f62c0d5822f631b786b29a1b1069ab714d1a28 ]

This is done in order not to trig the below warning in
ieee80211_rx_napi:

WARN_ON_ONCE(softirq_count() == 0);

ieee80211_rx_napi requires that softirq's are disabled during
execution.

The High latency bus drivers (SDIO and USB) sometimes call the wmi
ep_rx_complete callback from non softirq context, resulting in a trigger
of the above warning.

Calling ieee80211_rx_ni with softirq's already disabled (e.g., from
softirq context) should be safe as the local_bh_disable and
local_bh_enable functions (called from ieee80211_rx_ni) are fully
reentrant.

Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/wmi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 583147f00fa4e..40b36e73bb48c 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -2487,7 +2487,8 @@ int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb)
 		   status->freq, status->band, status->signal,
 		   status->rate_idx);
 
-	ieee80211_rx(ar->hw, skb);
+	ieee80211_rx_ni(ar->hw, skb);
+
 	return 0;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 094/205] ath10k: wmi: disable softirq's while calling ieee80211_rx

[Sasha Levin]

From: Erik Stromdahl <erik.stromdahl@gmail.com>

[ Upstream commit 37f62c0d5822f631b786b29a1b1069ab714d1a28 ]

This is done in order not to trig the below warning in
ieee80211_rx_napi:

WARN_ON_ONCE(softirq_count() == 0);

ieee80211_rx_napi requires that softirq's are disabled during
execution.

The High latency bus drivers (SDIO and USB) sometimes call the wmi
ep_rx_complete callback from non softirq context, resulting in a trigger
of the above warning.

Calling ieee80211_rx_ni with softirq's already disabled (e.g., from
softirq context) should be safe as the local_bh_disable and
local_bh_enable functions (called from ieee80211_rx_ni) are fully
reentrant.

Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/wmi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 583147f00fa4e..40b36e73bb48c 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -2487,7 +2487,8 @@ int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb)
 		   status->freq, status->band, status->signal,
 		   status->rate_idx);
 
-	ieee80211_rx(ar->hw, skb);
+	ieee80211_rx_ni(ar->hw, skb);
+
 	return 0;
 }
 
-- 
2.20.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH AUTOSEL 4.19 095/205] i2c: mediatek: Use DMA safe buffers for i2c transactions

[Sasha Levin]

From: Jun Gao <jun.gao@mediatek.com>

[ Upstream commit fc66b39fe36acfd06f716e338de7cd8f9550fad2 ]

DMA mode will always be used in i2c transactions, try to allocate
a DMA safe buffer if the buf of struct i2c_msg used is not DMA safe.

Signed-off-by: Jun Gao <jun.gao@mediatek.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/i2c/busses/i2c-mt65xx.c | 62 +++++++++++++++++++++++++++++----
 1 file changed, 55 insertions(+), 7 deletions(-)

diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 1e57f58fcb001..a74ef76705e0c 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -441,6 +441,8 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
 	u16 control_reg;
 	u16 restart_flag = 0;
 	u32 reg_4g_mode;
+	u8 *dma_rd_buf = NULL;
+	u8 *dma_wr_buf = NULL;
 	dma_addr_t rpaddr = 0;
 	dma_addr_t wpaddr = 0;
 	int ret;
@@ -500,10 +502,18 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
 	if (i2c->op == I2C_MASTER_RD) {
 		writel(I2C_DMA_INT_FLAG_NONE, i2c->pdmabase + OFFSET_INT_FLAG);
 		writel(I2C_DMA_CON_RX, i2c->pdmabase + OFFSET_CON);
-		rpaddr = dma_map_single(i2c->dev, msgs->buf,
+
+		dma_rd_buf = i2c_get_dma_safe_msg_buf(msgs, 0);
+		if (!dma_rd_buf)
+			return -ENOMEM;
+
+		rpaddr = dma_map_single(i2c->dev, dma_rd_buf,
 					msgs->len, DMA_FROM_DEVICE);
-		if (dma_mapping_error(i2c->dev, rpaddr))
+		if (dma_mapping_error(i2c->dev, rpaddr)) {
+			i2c_put_dma_safe_msg_buf(dma_rd_buf, msgs, false);
+
 			return -ENOMEM;
+		}
 
 		if (i2c->dev_comp->support_33bits) {
 			reg_4g_mode = mtk_i2c_set_4g_mode(rpaddr);
@@ -515,10 +525,18 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
 	} else if (i2c->op == I2C_MASTER_WR) {
 		writel(I2C_DMA_INT_FLAG_NONE, i2c->pdmabase + OFFSET_INT_FLAG);
 		writel(I2C_DMA_CON_TX, i2c->pdmabase + OFFSET_CON);
-		wpaddr = dma_map_single(i2c->dev, msgs->buf,
+
+		dma_wr_buf = i2c_get_dma_safe_msg_buf(msgs, 0);
+		if (!dma_wr_buf)
+			return -ENOMEM;
+
+		wpaddr = dma_map_single(i2c->dev, dma_wr_buf,
 					msgs->len, DMA_TO_DEVICE);
-		if (dma_mapping_error(i2c->dev, wpaddr))
+		if (dma_mapping_error(i2c->dev, wpaddr)) {
+			i2c_put_dma_safe_msg_buf(dma_wr_buf, msgs, false);
+
 			return -ENOMEM;
+		}
 
 		if (i2c->dev_comp->support_33bits) {
 			reg_4g_mode = mtk_i2c_set_4g_mode(wpaddr);
@@ -530,16 +548,39 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
 	} else {
 		writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_INT_FLAG);
 		writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_CON);
-		wpaddr = dma_map_single(i2c->dev, msgs->buf,
+
+		dma_wr_buf = i2c_get_dma_safe_msg_buf(msgs, 0);
+		if (!dma_wr_buf)
+			return -ENOMEM;
+
+		wpaddr = dma_map_single(i2c->dev, dma_wr_buf,
 					msgs->len, DMA_TO_DEVICE);
-		if (dma_mapping_error(i2c->dev, wpaddr))
+		if (dma_mapping_error(i2c->dev, wpaddr)) {
+			i2c_put_dma_safe_msg_buf(dma_wr_buf, msgs, false);
+
 			return -ENOMEM;
-		rpaddr = dma_map_single(i2c->dev, (msgs + 1)->buf,
+		}
+
+		dma_rd_buf = i2c_get_dma_safe_msg_buf((msgs + 1), 0);
+		if (!dma_rd_buf) {
+			dma_unmap_single(i2c->dev, wpaddr,
+					 msgs->len, DMA_TO_DEVICE);
+
+			i2c_put_dma_safe_msg_buf(dma_wr_buf, msgs, false);
+
+			return -ENOMEM;
+		}
+
+		rpaddr = dma_map_single(i2c->dev, dma_rd_buf,
 					(msgs + 1)->len,
 					DMA_FROM_DEVICE);
 		if (dma_mapping_error(i2c->dev, rpaddr)) {
 			dma_unmap_single(i2c->dev, wpaddr,
 					 msgs->len, DMA_TO_DEVICE);
+
+			i2c_put_dma_safe_msg_buf(dma_wr_buf, msgs, false);
+			i2c_put_dma_safe_msg_buf(dma_rd_buf, (msgs + 1), false);
+
 			return -ENOMEM;
 		}
 
@@ -578,14 +619,21 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
 	if (i2c->op == I2C_MASTER_WR) {
 		dma_unmap_single(i2c->dev, wpaddr,
 				 msgs->len, DMA_TO_DEVICE);
+
+		i2c_put_dma_safe_msg_buf(dma_wr_buf, msgs, true);
 	} else if (i2c->op == I2C_MASTER_RD) {
 		dma_unmap_single(i2c->dev, rpaddr,
 				 msgs->len, DMA_FROM_DEVICE);
+
+		i2c_put_dma_safe_msg_buf(dma_rd_buf, msgs, true);
 	} else {
 		dma_unmap_single(i2c->dev, wpaddr, msgs->len,
 				 DMA_TO_DEVICE);
 		dma_unmap_single(i2c->dev, rpaddr, (msgs + 1)->len,
 				 DMA_FROM_DEVICE);
+
+		i2c_put_dma_safe_msg_buf(dma_wr_buf, msgs, true);
+		i2c_put_dma_safe_msg_buf(dma_rd_buf, (msgs + 1), true);
 	}
 
 	if (ret == 0) {
-- 
2.20.1

[PATCH AUTOSEL 4.19 096/205] IB/mlx5: Don't hold spin lock while checking device state

[Sasha Levin]

From: Parav Pandit <parav@mellanox.com>

[ Upstream commit 6c75520f7e5a6a353f3b332509d205e213d05855 ]

mdev->state device state is not protected by the QP for which WRs are
being processed. Therefore, there is no need to hold spin lock while
checking mdev state.

Given that device fatal error is unlikely situation, wrap the condition
check with unlikely().

Additionally, kernel QP1 is also a kernel ULP for which soft CQEs needs
to be generated. Therefore, check for device fatal error before
processing QP1 work requests.

Fixes: 89ea94a7b6c4 ("IB/mlx5: Reset flow support for IB kernel ULPs")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/mlx5/qp.c | 26 ++++++++++++--------------
 1 file changed, 12 insertions(+), 14 deletions(-)

diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c
index 69669c3b13d85..3f96f0e4db796 100644
--- a/drivers/infiniband/hw/mlx5/qp.c
+++ b/drivers/infiniband/hw/mlx5/qp.c
@@ -4405,6 +4405,12 @@ static int _mlx5_ib_post_send(struct ib_qp *ibqp, const struct ib_send_wr *wr,
 	u8 next_fence = 0;
 	u8 fence;
 
+	if (unlikely(mdev->state == MLX5_DEVICE_STATE_INTERNAL_ERROR &&
+		     !drain)) {
+		*bad_wr = wr;
+		return -EIO;
+	}
+
 	if (unlikely(ibqp->qp_type == IB_QPT_GSI))
 		return mlx5_ib_gsi_post_send(ibqp, wr, bad_wr);
 
@@ -4414,13 +4420,6 @@ static int _mlx5_ib_post_send(struct ib_qp *ibqp, const struct ib_send_wr *wr,
 
 	spin_lock_irqsave(&qp->sq.lock, flags);
 
-	if (mdev->state == MLX5_DEVICE_STATE_INTERNAL_ERROR && !drain) {
-		err = -EIO;
-		*bad_wr = wr;
-		nreq = 0;
-		goto out;
-	}
-
 	for (nreq = 0; wr; nreq++, wr = wr->next) {
 		if (unlikely(wr->opcode >= ARRAY_SIZE(mlx5_ib_opcode))) {
 			mlx5_ib_warn(dev, "\n");
@@ -4735,18 +4734,17 @@ static int _mlx5_ib_post_recv(struct ib_qp *ibqp, const struct ib_recv_wr *wr,
 	int ind;
 	int i;
 
+	if (unlikely(mdev->state == MLX5_DEVICE_STATE_INTERNAL_ERROR &&
+		     !drain)) {
+		*bad_wr = wr;
+		return -EIO;
+	}
+
 	if (unlikely(ibqp->qp_type == IB_QPT_GSI))
 		return mlx5_ib_gsi_post_recv(ibqp, wr, bad_wr);
 
 	spin_lock_irqsave(&qp->rq.lock, flags);
 
-	if (mdev->state == MLX5_DEVICE_STATE_INTERNAL_ERROR && !drain) {
-		err = -EIO;
-		*bad_wr = wr;
-		nreq = 0;
-		goto out;
-	}
-
 	ind = qp->rq.head & (qp->rq.wqe_cnt - 1);
 
 	for (nreq = 0; wr; nreq++, wr = wr->next) {
-- 
2.20.1

[PATCH AUTOSEL 4.19 097/205] IB/ipoib: Ensure that MTU isn't less than minimum permitted

[Sasha Levin]

From: Muhammad Sammar <muhammads@mellanox.com>

[ Upstream commit 142a9c287613560edf5a03c8d142c8b6ebc1995b ]

It is illegal to change MTU to a value lower than the minimum MTU
stated in ethernet spec. In addition to that we need to add 4 bytes
for encapsulation header (IPOIB_ENCAP_LEN).

Before "ifconfig ib0 mtu 0" command, succeeds while it obviously shouldn't.

Signed-off-by: Muhammad Sammar <muhammads@mellanox.com>
Reviewed-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/ulp/ipoib/ipoib_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index 78dd36daac00e..d8cb5bbe6eb58 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -243,7 +243,8 @@ static int ipoib_change_mtu(struct net_device *dev, int new_mtu)
 		return 0;
 	}
 
-	if (new_mtu > IPOIB_UD_MTU(priv->max_ib_mtu))
+	if (new_mtu < (ETH_MIN_MTU + IPOIB_ENCAP_LEN) ||
+	    new_mtu > IPOIB_UD_MTU(priv->max_ib_mtu))
 		return -EINVAL;
 
 	priv->admin_mtu = new_mtu;
-- 
2.20.1

[PATCH AUTOSEL 4.19 098/205] RDMA/core: Rate limit MAD error messages

[Sasha Levin]

From: Parav Pandit <parav@mellanox.com>

[ Upstream commit f9d08f1e1939ad4d92e38bd3dee6842512f5bee6 ]

While registering a mad agent, a user space can trigger various errors
and flood the logs.

Therefore, decrease verbosity and rate limit such error messages.
While we are at it, use __func__ to print function name.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/core/mad.c | 72 ++++++++++++++++++-----------------
 1 file changed, 37 insertions(+), 35 deletions(-)

diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c
index 74aa3e651bc3c..218411282069b 100644
--- a/drivers/infiniband/core/mad.c
+++ b/drivers/infiniband/core/mad.c
@@ -223,30 +223,30 @@ struct ib_mad_agent *ib_register_mad_agent(struct ib_device *device,
 	/* Validate parameters */
 	qpn = get_spl_qp_index(qp_type);
 	if (qpn == -1) {
-		dev_notice(&device->dev,
-			   "ib_register_mad_agent: invalid QP Type %d\n",
-			   qp_type);
+		dev_dbg_ratelimited(&device->dev, "%s: invalid QP Type %d\n",
+				    __func__, qp_type);
 		goto error1;
 	}
 
 	if (rmpp_version && rmpp_version != IB_MGMT_RMPP_VERSION) {
-		dev_notice(&device->dev,
-			   "ib_register_mad_agent: invalid RMPP Version %u\n",
-			   rmpp_version);
+		dev_dbg_ratelimited(&device->dev,
+				    "%s: invalid RMPP Version %u\n",
+				    __func__, rmpp_version);
 		goto error1;
 	}
 
 	/* Validate MAD registration request if supplied */
 	if (mad_reg_req) {
 		if (mad_reg_req->mgmt_class_version >= MAX_MGMT_VERSION) {
-			dev_notice(&device->dev,
-				   "ib_register_mad_agent: invalid Class Version %u\n",
-				   mad_reg_req->mgmt_class_version);
+			dev_dbg_ratelimited(&device->dev,
+					    "%s: invalid Class Version %u\n",
+					    __func__,
+					    mad_reg_req->mgmt_class_version);
 			goto error1;
 		}
 		if (!recv_handler) {
-			dev_notice(&device->dev,
-				   "ib_register_mad_agent: no recv_handler\n");
+			dev_dbg_ratelimited(&device->dev,
+					    "%s: no recv_handler\n", __func__);
 			goto error1;
 		}
 		if (mad_reg_req->mgmt_class >= MAX_MGMT_CLASS) {
@@ -256,9 +256,9 @@ struct ib_mad_agent *ib_register_mad_agent(struct ib_device *device,
 			 */
 			if (mad_reg_req->mgmt_class !=
 			    IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE) {
-				dev_notice(&device->dev,
-					   "ib_register_mad_agent: Invalid Mgmt Class 0x%x\n",
-					   mad_reg_req->mgmt_class);
+				dev_dbg_ratelimited(&device->dev,
+					"%s: Invalid Mgmt Class 0x%x\n",
+					__func__, mad_reg_req->mgmt_class);
 				goto error1;
 			}
 		} else if (mad_reg_req->mgmt_class == 0) {
@@ -266,8 +266,9 @@ struct ib_mad_agent *ib_register_mad_agent(struct ib_device *device,
 			 * Class 0 is reserved in IBA and is used for
 			 * aliasing of IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE
 			 */
-			dev_notice(&device->dev,
-				   "ib_register_mad_agent: Invalid Mgmt Class 0\n");
+			dev_dbg_ratelimited(&device->dev,
+					    "%s: Invalid Mgmt Class 0\n",
+					    __func__);
 			goto error1;
 		} else if (is_vendor_class(mad_reg_req->mgmt_class)) {
 			/*
@@ -275,18 +276,19 @@ struct ib_mad_agent *ib_register_mad_agent(struct ib_device *device,
 			 * ensure supplied OUI is not zero
 			 */
 			if (!is_vendor_oui(mad_reg_req->oui)) {
-				dev_notice(&device->dev,
-					   "ib_register_mad_agent: No OUI specified for class 0x%x\n",
-					   mad_reg_req->mgmt_class);
+				dev_dbg_ratelimited(&device->dev,
+					"%s: No OUI specified for class 0x%x\n",
+					__func__,
+					mad_reg_req->mgmt_class);
 				goto error1;
 			}
 		}
 		/* Make sure class supplied is consistent with RMPP */
 		if (!ib_is_mad_class_rmpp(mad_reg_req->mgmt_class)) {
 			if (rmpp_version) {
-				dev_notice(&device->dev,
-					   "ib_register_mad_agent: RMPP version for non-RMPP class 0x%x\n",
-					   mad_reg_req->mgmt_class);
+				dev_dbg_ratelimited(&device->dev,
+					"%s: RMPP version for non-RMPP class 0x%x\n",
+					__func__, mad_reg_req->mgmt_class);
 				goto error1;
 			}
 		}
@@ -297,9 +299,9 @@ struct ib_mad_agent *ib_register_mad_agent(struct ib_device *device,
 					IB_MGMT_CLASS_SUBN_LID_ROUTED) &&
 			    (mad_reg_req->mgmt_class !=
 					IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE)) {
-				dev_notice(&device->dev,
-					   "ib_register_mad_agent: Invalid SM QP type: class 0x%x\n",
-					   mad_reg_req->mgmt_class);
+				dev_dbg_ratelimited(&device->dev,
+					"%s: Invalid SM QP type: class 0x%x\n",
+					__func__, mad_reg_req->mgmt_class);
 				goto error1;
 			}
 		} else {
@@ -307,9 +309,9 @@ struct ib_mad_agent *ib_register_mad_agent(struct ib_device *device,
 					IB_MGMT_CLASS_SUBN_LID_ROUTED) ||
 			    (mad_reg_req->mgmt_class ==
 					IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE)) {
-				dev_notice(&device->dev,
-					   "ib_register_mad_agent: Invalid GS QP type: class 0x%x\n",
-					   mad_reg_req->mgmt_class);
+				dev_dbg_ratelimited(&device->dev,
+					"%s: Invalid GS QP type: class 0x%x\n",
+					__func__, mad_reg_req->mgmt_class);
 				goto error1;
 			}
 		}
@@ -324,18 +326,18 @@ struct ib_mad_agent *ib_register_mad_agent(struct ib_device *device,
 	/* Validate device and port */
 	port_priv = ib_get_mad_port(device, port_num);
 	if (!port_priv) {
-		dev_notice(&device->dev,
-			   "ib_register_mad_agent: Invalid port %d\n",
-			   port_num);
+		dev_dbg_ratelimited(&device->dev, "%s: Invalid port %d\n",
+				    __func__, port_num);
 		ret = ERR_PTR(-ENODEV);
 		goto error1;
 	}
 
-	/* Verify the QP requested is supported.  For example, Ethernet devices
-	 * will not have QP0 */
+	/* Verify the QP requested is supported. For example, Ethernet devices
+	 * will not have QP0.
+	 */
 	if (!port_priv->qp_info[qpn].qp) {
-		dev_notice(&device->dev,
-			   "ib_register_mad_agent: QP %d not supported\n", qpn);
+		dev_dbg_ratelimited(&device->dev, "%s: QP %d not supported\n",
+				    __func__, qpn);
 		ret = ERR_PTR(-EPROTONOSUPPORT);
 		goto error1;
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.19 099/205] RDMA/core: Follow correct unregister order between sysfs and cgroup

[Sasha Levin]

From: Parav Pandit <parav@mellanox.com>

[ Upstream commit c715a39541bb399eb03d728a996b224d90ce1336 ]

During register_device() init sequence is,
(a) register with rdma cgroup followed by
(b) register with sysfs

Therefore, unregister_device() sequence should follow the reverse order.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/core/device.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/core/device.c b/drivers/infiniband/core/device.c
index 6d8ac51a39cc0..6a585c3e21923 100644
--- a/drivers/infiniband/core/device.c
+++ b/drivers/infiniband/core/device.c
@@ -599,8 +599,8 @@ void ib_unregister_device(struct ib_device *device)
 	}
 	up_read(&lists_rwsem);
 
-	ib_device_unregister_rdmacg(device);
 	ib_device_unregister_sysfs(device);
+	ib_device_unregister_rdmacg(device);
 
 	mutex_unlock(&device_mutex);
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 100/205] mips: txx9: fix iounmap related issue

[Sasha Levin]

From: Ding Xiang <dingxiang@cmss.chinamobile.com>

[ Upstream commit c6e1241a82e6e74d1ae5cc34581dab2ffd6022d0 ]

if device_register return error, iounmap should be called, also iounmap
need to call before put_device.

Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Reviewed-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20476/
Cc: ralf@linux-mips.org
Cc: jhogan@kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/txx9/generic/setup.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index f6d9182ef82a9..70a1ab66d252c 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -960,12 +960,11 @@ void __init txx9_sramc_init(struct resource *r)
 		goto exit_put;
 	err = sysfs_create_bin_file(&dev->dev.kobj, &dev->bindata_attr);
 	if (err) {
-		device_unregister(&dev->dev);
 		iounmap(dev->base);
-		kfree(dev);
+		device_unregister(&dev->dev);
 	}
 	return;
 exit_put:
+	iounmap(dev->base);
 	put_device(&dev->dev);
-	return;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.19 101/205] udf: Fix crash during mount

[Sasha Levin]

From: Jan Kara <jack@suse.cz>

[ Upstream commit b085fbe2ef7fa7489903c45271ae7b7a52b0f9ab ]

Fix a crash during an attempt to mount a filesystem that has both
Unallocated Space Table and Unallocated Space Bitmap. Such filesystem
actually violates the UDF standard so we just have to properly detect
such situation and refuse to mount such filesystem read-write. When we
are at it, verify also other constraints on the allocation information
mandated by the standard.

Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/udf/super.c | 65 ++++++++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 60 insertions(+), 5 deletions(-)

diff --git a/fs/udf/super.c b/fs/udf/super.c
index c495db7165aee..7af011dc9ae8a 100644
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -989,12 +989,62 @@ static struct udf_bitmap *udf_sb_alloc_bitmap(struct super_block *sb, u32 index)
 	return bitmap;
 }
 
+static int check_partition_desc(struct super_block *sb,
+				struct partitionDesc *p,
+				struct udf_part_map *map)
+{
+	bool umap, utable, fmap, ftable;
+	struct partitionHeaderDesc *phd;
+
+	switch (le32_to_cpu(p->accessType)) {
+	case PD_ACCESS_TYPE_READ_ONLY:
+	case PD_ACCESS_TYPE_WRITE_ONCE:
+	case PD_ACCESS_TYPE_REWRITABLE:
+	case PD_ACCESS_TYPE_NONE:
+		goto force_ro;
+	}
+
+	/* No Partition Header Descriptor? */
+	if (strcmp(p->partitionContents.ident, PD_PARTITION_CONTENTS_NSR02) &&
+	    strcmp(p->partitionContents.ident, PD_PARTITION_CONTENTS_NSR03))
+		goto force_ro;
+
+	phd = (struct partitionHeaderDesc *)p->partitionContentsUse;
+	utable = phd->unallocSpaceTable.extLength;
+	umap = phd->unallocSpaceBitmap.extLength;
+	ftable = phd->freedSpaceTable.extLength;
+	fmap = phd->freedSpaceBitmap.extLength;
+
+	/* No allocation info? */
+	if (!utable && !umap && !ftable && !fmap)
+		goto force_ro;
+
+	/* We don't support blocks that require erasing before overwrite */
+	if (ftable || fmap)
+		goto force_ro;
+	/* UDF 2.60: 2.3.3 - no mixing of tables & bitmaps, no VAT. */
+	if (utable && umap)
+		goto force_ro;
+
+	if (map->s_partition_type == UDF_VIRTUAL_MAP15 ||
+	    map->s_partition_type == UDF_VIRTUAL_MAP20)
+		goto force_ro;
+
+	return 0;
+force_ro:
+	if (!sb_rdonly(sb))
+		return -EACCES;
+	UDF_SET_FLAG(sb, UDF_FLAG_RW_INCOMPAT);
+	return 0;
+}
+
 static int udf_fill_partdesc_info(struct super_block *sb,
 		struct partitionDesc *p, int p_index)
 {
 	struct udf_part_map *map;
 	struct udf_sb_info *sbi = UDF_SB(sb);
 	struct partitionHeaderDesc *phd;
+	int err;
 
 	map = &sbi->s_partmaps[p_index];
 
@@ -1014,8 +1064,16 @@ static int udf_fill_partdesc_info(struct super_block *sb,
 		  p_index, map->s_partition_type,
 		  map->s_partition_root, map->s_partition_len);
 
-	if (strcmp(p->partitionContents.ident, PD_PARTITION_CONTENTS_NSR02) &&
-	    strcmp(p->partitionContents.ident, PD_PARTITION_CONTENTS_NSR03))
+	err = check_partition_desc(sb, p, map);
+	if (err)
+		return err;
+
+	/*
+	 * Skip loading allocation info it we cannot ever write to the fs.
+	 * This is a correctness thing as we may have decided to force ro mount
+	 * to avoid allocation info we don't support.
+	 */
+	if (UDF_QUERY_FLAG(sb, UDF_FLAG_RW_INCOMPAT))
 		return 0;
 
 	phd = (struct partitionHeaderDesc *)p->partitionContentsUse;
@@ -1051,9 +1109,6 @@ static int udf_fill_partdesc_info(struct super_block *sb,
 			  p_index, bitmap->s_extPosition);
 	}
 
-	if (phd->partitionIntegrityTable.extLength)
-		udf_debug("partitionIntegrityTable (part %d)\n", p_index);
-
 	if (phd->freedSpaceTable.extLength) {
 		struct kernel_lb_addr loc = {
 			.logicalBlockNum = le32_to_cpu(
-- 
2.20.1

[PATCH AUTOSEL 4.19 102/205] ASoC: dapm: Avoid uninitialised variable warning

[Sasha Levin]

From: Charles Keepax <ckeepax@opensource.cirrus.com>

[ Upstream commit fc269c0396448cabe1afd648c0b335669aa347b7 ]

Commit 4a75aae17b2a ("ASoC: dapm: Add support for multi-CODEC
CODEC to CODEC links") adds loops that iterate over multiple
CODECs in snd_soc_dai_link_event. This also introduced a compiler
warning for a potentially uninitialised variable in the case
no CODECs are present. This should never be the case as the
DAI link must by definition contain at least 1 CODEC however
probably best to avoid the compiler warning by initialising ret
to zero.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/soc-dapm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index ff31d9f9ecd64..7f0b48b363809 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -3684,7 +3684,7 @@ static int snd_soc_dai_link_event(struct snd_soc_dapm_widget *w,
 	struct snd_pcm_hw_params *params = NULL;
 	struct snd_pcm_runtime *runtime = NULL;
 	unsigned int fmt;
-	int ret;
+	int ret = 0;
 
 	if (WARN_ON(!config) ||
 	    WARN_ON(list_empty(&w->edges[SND_SOC_DAPM_DIR_OUT]) ||
-- 
2.20.1

[PATCH AUTOSEL 4.19 103/205] ASoC: Intel: hdac_hdmi: Limit sampling rates at dai creation

[Sasha Levin]

From: Yong Zhi <yong.zhi@intel.com>

[ Upstream commit 3b857472f34faa7d11001afa5e158833812c98d7 ]

Playback of 44.1Khz contents with HDMI plugged returns
"Invalid pipe config" because HDMI paths in the FW
topology are configured to operate at 48Khz.

This patch filters out sampling rates not supported
at hdac_hdmi_create_dais() to let user space SRC
to do the converting.

Signed-off-by: Yong Zhi <yong.zhi@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/hdac_hdmi.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c
index 098196610542a..be2473166bfaf 100644
--- a/sound/soc/codecs/hdac_hdmi.c
+++ b/sound/soc/codecs/hdac_hdmi.c
@@ -1410,6 +1410,12 @@ static int hdac_hdmi_create_dais(struct hdac_device *hdev,
 		if (ret)
 			return ret;
 
+		/* Filter out 44.1, 88.2 and 176.4Khz */
+		rates &= ~(SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_88200 |
+			   SNDRV_PCM_RATE_176400);
+		if (!rates)
+			return -EINVAL;
+
 		sprintf(dai_name, "intel-hdmi-hifi%d", i+1);
 		hdmi_dais[i].name = devm_kstrdup(&hdev->dev,
 					dai_name, GFP_KERNEL);
-- 
2.20.1

[PATCH AUTOSEL 4.19 104/205] ata: Disable AHCI ALPM feature for Ampere Computing eMAG SATA

[Sasha Levin]

From: Suman Tripathi <stripathi@amperecomputing.com>

[ Upstream commit 20bdc376b427cb420836f39ee8f281ea85dbaeef ]

Due to hardware errata, Ampere Computing eMAG SATA can't support
AHCI ALPM feature. This patch disables the AHCI ALPM feature for
eMAG SATA.

Signed-off-by: Suman Trpathi <stripathi@amperecomputing.com>
Signed-off-by: Rameshwar Prasad Sahu <rameshwar.sahu@amperecomputing.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/ata/ahci_platform.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 46f0bd75eff79..cf1e0e18a7a98 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -33,6 +33,13 @@ static const struct ata_port_info ahci_port_info = {
 	.port_ops	= &ahci_platform_ops,
 };
 
+static const struct ata_port_info ahci_port_info_nolpm = {
+	.flags		= AHCI_FLAG_COMMON | ATA_FLAG_NO_LPM,
+	.pio_mask	= ATA_PIO4,
+	.udma_mask	= ATA_UDMA6,
+	.port_ops	= &ahci_platform_ops,
+};
+
 static struct scsi_host_template ahci_platform_sht = {
 	AHCI_SHT(DRV_NAME),
 };
@@ -41,6 +48,7 @@ static int ahci_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct ahci_host_priv *hpriv;
+	const struct ata_port_info *port;
 	int rc;
 
 	hpriv = ahci_platform_get_resources(pdev,
@@ -58,7 +66,11 @@ static int ahci_probe(struct platform_device *pdev)
 	if (of_device_is_compatible(dev->of_node, "hisilicon,hisi-ahci"))
 		hpriv->flags |= AHCI_HFLAG_NO_FBS | AHCI_HFLAG_NO_NCQ;
 
-	rc = ahci_platform_init_host(pdev, hpriv, &ahci_port_info,
+	port = acpi_device_get_match_data(dev);
+	if (!port)
+		port = &ahci_port_info;
+
+	rc = ahci_platform_init_host(pdev, hpriv, port,
 				     &ahci_platform_sht);
 	if (rc)
 		goto disable_resources;
@@ -85,6 +97,7 @@ static const struct of_device_id ahci_of_match[] = {
 MODULE_DEVICE_TABLE(of, ahci_of_match);
 
 static const struct acpi_device_id ahci_acpi_match[] = {
+	{ "APMC0D33", (unsigned long)&ahci_port_info_nolpm },
 	{ ACPI_DEVICE_CLASS(PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff) },
 	{},
 };
-- 
2.20.1

[PATCH AUTOSEL 4.19 105/205] of: make PowerMac cache node search conditional on CONFIG_PPC_PMAC

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit f6707fd6241e483f6fea2caae82d876e422bb11a ]

Cache nodes under the cpu node(s) is PowerMac specific according to the
comment above, so make the code enforce that.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/of/base.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/of/base.c b/drivers/of/base.c
index 3f21ea6a90dcb..f0dbb7ad88cf6 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -2066,7 +2066,7 @@ struct device_node *of_find_next_cache_node(const struct device_node *np)
 	/* OF on pmac has nodes instead of properties named "l2-cache"
 	 * beneath CPU nodes.
 	 */
-	if (!strcmp(np->type, "cpu"))
+	if (IS_ENABLED(CONFIG_PPC_PMAC) && !strcmp(np->type, "cpu"))
 		for_each_child_of_node(np, child)
 			if (!strcmp(child->type, "cache"))
 				return child;
-- 
2.20.1

[PATCH AUTOSEL 4.19 106/205] ARM: dts: omap3-gta04: give spi_lcd node a label so that we can overwrite in other DTS files

[Sasha Levin]

From: "H. Nikolaus Schaller" <hns@goldelico.com>

[ Upstream commit fa0d7dc355c890725b6178dab0cc11b194203afa ]

needed for device variants based on GTA04 board but with
different display panel (driver).

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/omap3-gta04.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index ac830b9177763..ae33e0e0f1d2c 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -78,7 +78,7 @@
 		#sound-dai-cells = <0>;
 	};
 
-	spi_lcd {
+	spi_lcd: spi_lcd {
 		compatible = "spi-gpio";
 		#address-cells = <0x1>;
 		#size-cells = <0x0>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 107/205] ARM: dts: omap3-gta04: fixes for tvout / venc

[Sasha Levin]

From: "H. Nikolaus Schaller" <hns@goldelico.com>

[ Upstream commit f6591391373dbff2c0200e1055d4ff86191578d2 ]

* fix connector compatibility (composite)
* add comment for gpio1 23
* add proper #address-cells
* we use only one venc_out channel for composite

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/omap3-gta04.dtsi | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index ae33e0e0f1d2c..eee5fa0035071 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -131,7 +131,7 @@
 	};
 
 	tv0: connector {
-		compatible = "svideo-connector";
+		compatible = "composite-video-connector";
 		label = "tv";
 
 		port {
@@ -143,7 +143,7 @@
 
 	tv_amp: opa362 {
 		compatible = "ti,opa362";
-		enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;	/* GPIO_23 to enable video out amplifier */
 
 		ports {
 			#address-cells = <1>;
@@ -551,10 +551,14 @@
 
 	vdda-supply = <&vdac>;
 
+	#address-cells = <1>;
+	#size-cells = <0>;
+
 	port {
+		reg = <0>;
 		venc_out: endpoint {
 			remote-endpoint = <&opa_in>;
-			ti,channels = <2>;
+			ti,channels = <1>;
 			ti,invert-polarity;
 		};
 	};
-- 
2.20.1

[PATCH AUTOSEL 4.19 108/205] ARM: dts: omap3-gta04: tvout: enable as display1 alias

[Sasha Levin]

From: "H. Nikolaus Schaller" <hns@goldelico.com>

[ Upstream commit 8905592b6e50cec905e6c6035bbd36201a3bfac1 ]

The omap dss susbystem takes the display aliases to find
out which displays exist. To enable tv-out we must define
an alias.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/omap3-gta04.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index eee5fa0035071..79d708ce3a93f 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -28,6 +28,7 @@
 
 	aliases {
 		display0 = &lcd;
+		display1 = &tv0;
 	};
 
 	/* fixed 26MHz oscillator */
-- 
2.20.1

[PATCH AUTOSEL 4.19 109/205] ARM: dts: omap3-gta04: fix touchscreen tsc2007

[Sasha Levin]

From: "H. Nikolaus Schaller" <hns@goldelico.com>

[ Upstream commit 7384a24248eda140a234d356b6c840701ee9f055 ]

we fix penirq polarity, add penirq pinmux and touchscreen
properties.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/omap3-gta04.dtsi | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index 79d708ce3a93f..de873e395c05d 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -283,6 +283,13 @@
 			OMAP3_CORE1_IOPAD(0x2134, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio112 */
 		>;
 	};
+
+	penirq_pins: pinmux_penirq_pins {
+		pinctrl-single,pins = <
+			/* here we could enable to wakeup the cpu from suspend by a pen touch */
+			OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio160 */
+		>;
+	};
 };
 
 &omap3_pmx_core2 {
@@ -423,10 +430,19 @@
 	tsc2007@48 {
 		compatible = "ti,tsc2007";
 		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&penirq_pins>;
 		interrupt-parent = <&gpio6>;
 		interrupts = <0 IRQ_TYPE_EDGE_FALLING>; /* GPIO_160 */
-		gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;
+		gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;	/* GPIO_160 */
 		ti,x-plate-ohms = <600>;
+		touchscreen-size-x = <480>;
+		touchscreen-size-y = <640>;
+		touchscreen-max-pressure = <1000>;
+		touchscreen-fuzz-x = <3>;
+		touchscreen-fuzz-y = <8>;
+		touchscreen-fuzz-pressure = <10>;
+		touchscreen-inverted-y;
 	};
 
 	/* RFID EEPROM */
-- 
2.20.1

[PATCH AUTOSEL 4.19 110/205] ARM: dts: omap3-gta04: make NAND partitions compatible with recent U-Boot

[Sasha Levin]

From: "H. Nikolaus Schaller" <hns@goldelico.com>

[ Upstream commit fa99c21ecb3cd4021a60d0e8bf880e78b5bd0729 ]

Vendor defined U-Boot has changed the partition scheme a while ago:

* kernel partition 6MB
* file system partition uses the remainder up to end of the NAND
* increased size of the environment partition (to get an OneNAND compatible base address)
* shrink the U-Boot partition

Let's be compatible (e.g. Debian kernel built from upstream).

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/omap3-gta04.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index de873e395c05d..bb435684500fc 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -619,22 +619,22 @@
 
 		bootloaders@80000 {
 			label = "U-Boot";
-			reg = <0x80000 0x1e0000>;
+			reg = <0x80000 0x1c0000>;
 		};
 
-		bootloaders_env@260000 {
+		bootloaders_env@240000 {
 			label = "U-Boot Env";
-			reg = <0x260000 0x20000>;
+			reg = <0x240000 0x40000>;
 		};
 
 		kernel@280000 {
 			label = "Kernel";
-			reg = <0x280000 0x400000>;
+			reg = <0x280000 0x600000>;
 		};
 
-		filesystem@680000 {
+		filesystem@880000 {
 			label = "File System";
-			reg = <0x680000 0xf980000>;
+			reg = <0x880000 0>;	/* 0 = MTDPART_SIZ_FULL */
 		};
 	};
 };
-- 
2.20.1

[PATCH AUTOSEL 4.19 111/205] ARM: dts: omap3-gta04: keep vpll2 always on

[Sasha Levin]

From: "H. Nikolaus Schaller" <hns@goldelico.com>

[ Upstream commit 1ae00833e30c9b4af5cbfda65d75b1de12f74013 ]

This is needed to make the display and venc work properly.
Compare to omap3-beagle.dts.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/omap3-gta04.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index bb435684500fc..0c39a2340030b 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -548,6 +548,12 @@
 	regulator-max-microvolt = <3150000>;
 };
 
+/* Needed to power the DPI pins */
+
+&vpll2 {
+	regulator-always-on;
+};
+
 &dss {
 	pinctrl-names = "default";
 	pinctrl-0 = < &dss_dpi_pins >;
-- 
2.20.1

[PATCH AUTOSEL 4.19 112/205] f2fs: submit bio after shutdown

[Sasha Levin]

From: Jaegeuk Kim <jaegeuk@kernel.org>

[ Upstream commit 5ce805869cbed93267ed26552ff76e30f05c91f7 ]

Sometimes, some merged IOs could get a chance to be submitted, resulting in
system hang in shutdown test. This issues IOs all the time after shutdown.

Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/data.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index c61beaedf0789..b4a634da1372b 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -543,6 +543,8 @@ skip:
 	if (fio->in_list)
 		goto next;
 out:
+	if (is_sbi_flag_set(sbi, SBI_IS_SHUTDOWN))
+		__submit_merged_bio(io);
 	up_write(&io->io_rwsem);
 }
 
-- 
2.20.1

[f2fs-dev] [PATCH AUTOSEL 4.19 112/205] f2fs: submit bio after shutdown

[Sasha Levin]

From: Jaegeuk Kim <jaegeuk@kernel.org>

[ Upstream commit 5ce805869cbed93267ed26552ff76e30f05c91f7 ]

Sometimes, some merged IOs could get a chance to be submitted, resulting in
system hang in shutdown test. This issues IOs all the time after shutdown.

Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/data.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index c61beaedf0789..b4a634da1372b 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -543,6 +543,8 @@ skip:
 	if (fio->in_list)
 		goto next;
 out:
+	if (is_sbi_flag_set(sbi, SBI_IS_SHUTDOWN))
+		__submit_merged_bio(io);
 	up_write(&io->io_rwsem);
 }
 
-- 
2.20.1



_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel

[PATCH AUTOSEL 4.19 113/205] failover: Fix error return code in net_failover_create

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 09317da317e55e70ccbe23f65008348a4a1b7c7f ]

if failover_register failed, 'err' code should be set correctly

Fixes: cfc80d9a1163 ("net: Introduce net_failover driver")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/net_failover.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/net_failover.c b/drivers/net/net_failover.c
index 5a749dc25bec4..beeb7eb76ca32 100644
--- a/drivers/net/net_failover.c
+++ b/drivers/net/net_failover.c
@@ -765,8 +765,10 @@ struct failover *net_failover_create(struct net_device *standby_dev)
 	netif_carrier_off(failover_dev);
 
 	failover = failover_register(failover_dev, &net_failover_ops);
-	if (IS_ERR(failover))
+	if (IS_ERR(failover)) {
+		err = PTR_ERR(failover);
 		goto err_failover_register;
+	}
 
 	return failover;
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 114/205] sched/debug: Explicitly cast sched_feat() to bool

[Sasha Levin]

From: Peter Zijlstra <peterz@infradead.org>

[ Upstream commit 7e6f4c5d600c1c8e2a1d900e65cab319d9b6782e ]

LLVM has a warning that tags expressions like:

	if (foo && non-bool-const)

This pattern triggers for CONFIG_SCHED_DEBUG=n where sched_feat() ends
up being whatever bit we select. Avoid the warning with an explicit
cast to bool.

Reported-by: Philipp Klocke <philipp97kl@gmail.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/sched/sched.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index 9a7c3d08b39f8..c32322c73e22a 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -1393,7 +1393,7 @@ static const_debug __maybe_unused unsigned int sysctl_sched_features =
 	0;
 #undef SCHED_FEAT
 
-#define sched_feat(x) (sysctl_sched_features & (1UL << __SCHED_FEAT_##x))
+#define sched_feat(x) !!(sysctl_sched_features & (1UL << __SCHED_FEAT_##x))
 
 #endif /* SCHED_DEBUG && CONFIG_JUMP_LABEL */
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 115/205] sched/debug: Use symbolic names for task state constants

[Sasha Levin]

From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

[ Upstream commit ff28915fd31ccafc0d38e6f84b66df280ed9e86a ]

include/trace/events/sched.h includes <linux/sched.h> (via
<linux/sched/numa_balancing.h>) and so knows about the TASK_* constants
used to interpret .prev_state. So instead of duplicating the magic
numbers make use of the defined macros to ease understanding the
mapping from state bits to letters which isn't completely intuitive for
an outsider.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kernel@pengutronix.de
Link: http://lkml.kernel.org/r/20180905093636.24068-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/trace/events/sched.h | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/include/trace/events/sched.h b/include/trace/events/sched.h
index 5e1a7578c9edd..9a4bdfadab077 100644
--- a/include/trace/events/sched.h
+++ b/include/trace/events/sched.h
@@ -169,9 +169,14 @@ TRACE_EVENT(sched_switch,
 
 		(__entry->prev_state & (TASK_REPORT_MAX - 1)) ?
 		  __print_flags(__entry->prev_state & (TASK_REPORT_MAX - 1), "|",
-				{ 0x01, "S" }, { 0x02, "D" }, { 0x04, "T" },
-				{ 0x08, "t" }, { 0x10, "X" }, { 0x20, "Z" },
-				{ 0x40, "P" }, { 0x80, "I" }) :
+				{ TASK_INTERRUPTIBLE, "S" },
+				{ TASK_UNINTERRUPTIBLE, "D" },
+				{ __TASK_STOPPED, "T" },
+				{ __TASK_TRACED, "t" },
+				{ EXIT_DEAD, "X" },
+				{ EXIT_ZOMBIE, "Z" },
+				{ TASK_PARKED, "P" },
+				{ TASK_DEAD, "I" }) :
 		  "R",
 
 		__entry->prev_state & TASK_REPORT_MAX ? "+" : "",
-- 
2.20.1

[PATCH AUTOSEL 4.19 116/205] firmware: arm_scmi: use strlcpy to ensure NULL-terminated strings

[Sasha Levin]

From: Sudeep Holla <sudeep.holla@arm.com>

[ Upstream commit ca64b719a1e665ac7449b6a968059176af7365a8 ]

Replace all the memcpy() for copying name strings from the firmware with
strlcpy() to make sure we are bounded by the source buffer size and we
also always have NULL-terminated strings.

This is needed to avoid out of bounds accesses if the firmware returns
a non-terminated string.

Reported-by: Olof Johansson <olof@lixom.net>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/arm_scmi/base.c    | 2 +-
 drivers/firmware/arm_scmi/clock.c   | 2 +-
 drivers/firmware/arm_scmi/perf.c    | 2 +-
 drivers/firmware/arm_scmi/power.c   | 2 +-
 drivers/firmware/arm_scmi/sensors.c | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/firmware/arm_scmi/base.c b/drivers/firmware/arm_scmi/base.c
index 9dff33ea6416f..204390297f4bd 100644
--- a/drivers/firmware/arm_scmi/base.c
+++ b/drivers/firmware/arm_scmi/base.c
@@ -208,7 +208,7 @@ static int scmi_base_discover_agent_get(const struct scmi_handle *handle,
 
 	ret = scmi_do_xfer(handle, t);
 	if (!ret)
-		memcpy(name, t->rx.buf, SCMI_MAX_STR_SIZE);
+		strlcpy(name, t->rx.buf, SCMI_MAX_STR_SIZE);
 
 	scmi_xfer_put(handle, t);
 
diff --git a/drivers/firmware/arm_scmi/clock.c b/drivers/firmware/arm_scmi/clock.c
index e4119eb34986c..30fc04e284312 100644
--- a/drivers/firmware/arm_scmi/clock.c
+++ b/drivers/firmware/arm_scmi/clock.c
@@ -111,7 +111,7 @@ static int scmi_clock_attributes_get(const struct scmi_handle *handle,
 
 	ret = scmi_do_xfer(handle, t);
 	if (!ret)
-		memcpy(clk->name, attr->name, SCMI_MAX_STR_SIZE);
+		strlcpy(clk->name, attr->name, SCMI_MAX_STR_SIZE);
 	else
 		clk->name[0] = '\0';
 
diff --git a/drivers/firmware/arm_scmi/perf.c b/drivers/firmware/arm_scmi/perf.c
index 64342944d9175..87c99d296ecd3 100644
--- a/drivers/firmware/arm_scmi/perf.c
+++ b/drivers/firmware/arm_scmi/perf.c
@@ -174,7 +174,7 @@ scmi_perf_domain_attributes_get(const struct scmi_handle *handle, u32 domain,
 			dom_info->mult_factor =
 					(dom_info->sustained_freq_khz * 1000) /
 					dom_info->sustained_perf_level;
-		memcpy(dom_info->name, attr->name, SCMI_MAX_STR_SIZE);
+		strlcpy(dom_info->name, attr->name, SCMI_MAX_STR_SIZE);
 	}
 
 	scmi_xfer_put(handle, t);
diff --git a/drivers/firmware/arm_scmi/power.c b/drivers/firmware/arm_scmi/power.c
index cfa033b05aed5..62f3401a1f01e 100644
--- a/drivers/firmware/arm_scmi/power.c
+++ b/drivers/firmware/arm_scmi/power.c
@@ -106,7 +106,7 @@ scmi_power_domain_attributes_get(const struct scmi_handle *handle, u32 domain,
 		dom_info->state_set_notify = SUPPORTS_STATE_SET_NOTIFY(flags);
 		dom_info->state_set_async = SUPPORTS_STATE_SET_ASYNC(flags);
 		dom_info->state_set_sync = SUPPORTS_STATE_SET_SYNC(flags);
-		memcpy(dom_info->name, attr->name, SCMI_MAX_STR_SIZE);
+		strlcpy(dom_info->name, attr->name, SCMI_MAX_STR_SIZE);
 	}
 
 	scmi_xfer_put(handle, t);
diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c
index 27f2092b9882a..b53d5cc9c9f6c 100644
--- a/drivers/firmware/arm_scmi/sensors.c
+++ b/drivers/firmware/arm_scmi/sensors.c
@@ -140,7 +140,7 @@ static int scmi_sensor_description_get(const struct scmi_handle *handle,
 			s = &si->sensors[desc_index + cnt];
 			s->id = le32_to_cpu(buf->desc[cnt].id);
 			s->type = SENSOR_TYPE(attrh);
-			memcpy(s->name, buf->desc[cnt].name, SCMI_MAX_STR_SIZE);
+			strlcpy(s->name, buf->desc[cnt].name, SCMI_MAX_STR_SIZE);
 		}
 
 		desc_index += num_returned;
-- 
2.20.1

[PATCH AUTOSEL 4.19 116/205] firmware: arm_scmi: use strlcpy to ensure NULL-terminated strings

[Sasha Levin]

From: Sudeep Holla <sudeep.holla@arm.com>

[ Upstream commit ca64b719a1e665ac7449b6a968059176af7365a8 ]

Replace all the memcpy() for copying name strings from the firmware with
strlcpy() to make sure we are bounded by the source buffer size and we
also always have NULL-terminated strings.

This is needed to avoid out of bounds accesses if the firmware returns
a non-terminated string.

Reported-by: Olof Johansson <olof@lixom.net>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/firmware/arm_scmi/base.c    | 2 +-
 drivers/firmware/arm_scmi/clock.c   | 2 +-
 drivers/firmware/arm_scmi/perf.c    | 2 +-
 drivers/firmware/arm_scmi/power.c   | 2 +-
 drivers/firmware/arm_scmi/sensors.c | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/firmware/arm_scmi/base.c b/drivers/firmware/arm_scmi/base.c
index 9dff33ea6416f..204390297f4bd 100644
--- a/drivers/firmware/arm_scmi/base.c
+++ b/drivers/firmware/arm_scmi/base.c
@@ -208,7 +208,7 @@ static int scmi_base_discover_agent_get(const struct scmi_handle *handle,
 
 	ret = scmi_do_xfer(handle, t);
 	if (!ret)
-		memcpy(name, t->rx.buf, SCMI_MAX_STR_SIZE);
+		strlcpy(name, t->rx.buf, SCMI_MAX_STR_SIZE);
 
 	scmi_xfer_put(handle, t);
 
diff --git a/drivers/firmware/arm_scmi/clock.c b/drivers/firmware/arm_scmi/clock.c
index e4119eb34986c..30fc04e284312 100644
--- a/drivers/firmware/arm_scmi/clock.c
+++ b/drivers/firmware/arm_scmi/clock.c
@@ -111,7 +111,7 @@ static int scmi_clock_attributes_get(const struct scmi_handle *handle,
 
 	ret = scmi_do_xfer(handle, t);
 	if (!ret)
-		memcpy(clk->name, attr->name, SCMI_MAX_STR_SIZE);
+		strlcpy(clk->name, attr->name, SCMI_MAX_STR_SIZE);
 	else
 		clk->name[0] = '\0';
 
diff --git a/drivers/firmware/arm_scmi/perf.c b/drivers/firmware/arm_scmi/perf.c
index 64342944d9175..87c99d296ecd3 100644
--- a/drivers/firmware/arm_scmi/perf.c
+++ b/drivers/firmware/arm_scmi/perf.c
@@ -174,7 +174,7 @@ scmi_perf_domain_attributes_get(const struct scmi_handle *handle, u32 domain,
 			dom_info->mult_factor =
 					(dom_info->sustained_freq_khz * 1000) /
 					dom_info->sustained_perf_level;
-		memcpy(dom_info->name, attr->name, SCMI_MAX_STR_SIZE);
+		strlcpy(dom_info->name, attr->name, SCMI_MAX_STR_SIZE);
 	}
 
 	scmi_xfer_put(handle, t);
diff --git a/drivers/firmware/arm_scmi/power.c b/drivers/firmware/arm_scmi/power.c
index cfa033b05aed5..62f3401a1f01e 100644
--- a/drivers/firmware/arm_scmi/power.c
+++ b/drivers/firmware/arm_scmi/power.c
@@ -106,7 +106,7 @@ scmi_power_domain_attributes_get(const struct scmi_handle *handle, u32 domain,
 		dom_info->state_set_notify = SUPPORTS_STATE_SET_NOTIFY(flags);
 		dom_info->state_set_async = SUPPORTS_STATE_SET_ASYNC(flags);
 		dom_info->state_set_sync = SUPPORTS_STATE_SET_SYNC(flags);
-		memcpy(dom_info->name, attr->name, SCMI_MAX_STR_SIZE);
+		strlcpy(dom_info->name, attr->name, SCMI_MAX_STR_SIZE);
 	}
 
 	scmi_xfer_put(handle, t);
diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c
index 27f2092b9882a..b53d5cc9c9f6c 100644
--- a/drivers/firmware/arm_scmi/sensors.c
+++ b/drivers/firmware/arm_scmi/sensors.c
@@ -140,7 +140,7 @@ static int scmi_sensor_description_get(const struct scmi_handle *handle,
 			s = &si->sensors[desc_index + cnt];
 			s->id = le32_to_cpu(buf->desc[cnt].id);
 			s->type = SENSOR_TYPE(attrh);
-			memcpy(s->name, buf->desc[cnt].name, SCMI_MAX_STR_SIZE);
+			strlcpy(s->name, buf->desc[cnt].name, SCMI_MAX_STR_SIZE);
 		}
 
 		desc_index += num_returned;
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.19 117/205] arm64: dts: rockchip: Fix VCC5V0_HOST_EN on rk3399-sapphire

[Sasha Levin]

From: Vicente Bergas <vicencb@gmail.com>

[ Upstream commit bcdb578a5f5b4aea79441606ab7f0a2e076b4474 ]

The pin is GPIO4-D1 not GPIO1-D1, see schematic, page 15 for reference.

Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
index 36b60791c156d..8b33ef3306820 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
@@ -116,7 +116,7 @@
 	vcc5v0_host: vcc5v0-host-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
-		gpio = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&vcc5v0_host_en>;
 		regulator-name = "vcc5v0_host";
-- 
2.20.1

[PATCH AUTOSEL 4.19 118/205] tty/serial: atmel: Change the driver to work under at91-usart MFD

[Sasha Levin]

From: Radu Pirea <radu.pirea@microchip.com>

[ Upstream commit c24d25317a7c6bb3053d4c193b3cf57d1e9a3e4b ]

This patch modifies the place where resources and device tree properties
are searched.

Signed-off-by: Radu Pirea <radu.pirea@microchip.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/tty/serial/Kconfig        |  1 +
 drivers/tty/serial/atmel_serial.c | 42 ++++++++++++++++++++-----------
 2 files changed, 28 insertions(+), 15 deletions(-)

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index df8bd0c7b97db..32886c3046413 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -118,6 +118,7 @@ config SERIAL_ATMEL
 	depends on ARCH_AT91 || COMPILE_TEST
 	select SERIAL_CORE
 	select SERIAL_MCTRL_GPIO if GPIOLIB
+	select MFD_AT91_USART
 	help
 	  This enables the driver for the on-chip UARTs of the Atmel
 	  AT91 processors.
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index dd8949e8fcd7a..251f708f47f76 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -195,8 +195,7 @@ static struct console atmel_console;
 
 #if defined(CONFIG_OF)
 static const struct of_device_id atmel_serial_dt_ids[] = {
-	{ .compatible = "atmel,at91rm9200-usart" },
-	{ .compatible = "atmel,at91sam9260-usart" },
+	{ .compatible = "atmel,at91rm9200-usart-serial" },
 	{ /* sentinel */ }
 };
 #endif
@@ -926,6 +925,7 @@ static void atmel_tx_dma(struct uart_port *port)
 static int atmel_prepare_tx_dma(struct uart_port *port)
 {
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+	struct device *mfd_dev = port->dev->parent;
 	dma_cap_mask_t		mask;
 	struct dma_slave_config config;
 	int ret, nent;
@@ -933,7 +933,7 @@ static int atmel_prepare_tx_dma(struct uart_port *port)
 	dma_cap_zero(mask);
 	dma_cap_set(DMA_SLAVE, mask);
 
-	atmel_port->chan_tx = dma_request_slave_channel(port->dev, "tx");
+	atmel_port->chan_tx = dma_request_slave_channel(mfd_dev, "tx");
 	if (atmel_port->chan_tx == NULL)
 		goto chan_err;
 	dev_info(port->dev, "using %s for tx DMA transfers\n",
@@ -1104,6 +1104,7 @@ static void atmel_rx_from_dma(struct uart_port *port)
 static int atmel_prepare_rx_dma(struct uart_port *port)
 {
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
+	struct device *mfd_dev = port->dev->parent;
 	struct dma_async_tx_descriptor *desc;
 	dma_cap_mask_t		mask;
 	struct dma_slave_config config;
@@ -1115,7 +1116,7 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
 	dma_cap_zero(mask);
 	dma_cap_set(DMA_CYCLIC, mask);
 
-	atmel_port->chan_rx = dma_request_slave_channel(port->dev, "rx");
+	atmel_port->chan_rx = dma_request_slave_channel(mfd_dev, "rx");
 	if (atmel_port->chan_rx == NULL)
 		goto chan_err;
 	dev_info(port->dev, "using %s for rx DMA transfers\n",
@@ -2246,8 +2247,8 @@ static const char *atmel_type(struct uart_port *port)
  */
 static void atmel_release_port(struct uart_port *port)
 {
-	struct platform_device *pdev = to_platform_device(port->dev);
-	int size = pdev->resource[0].end - pdev->resource[0].start + 1;
+	struct platform_device *mpdev = to_platform_device(port->dev->parent);
+	int size = resource_size(mpdev->resource);
 
 	release_mem_region(port->mapbase, size);
 
@@ -2262,8 +2263,8 @@ static void atmel_release_port(struct uart_port *port)
  */
 static int atmel_request_port(struct uart_port *port)
 {
-	struct platform_device *pdev = to_platform_device(port->dev);
-	int size = pdev->resource[0].end - pdev->resource[0].start + 1;
+	struct platform_device *mpdev = to_platform_device(port->dev->parent);
+	int size = resource_size(mpdev->resource);
 
 	if (!request_mem_region(port->mapbase, size, "atmel_serial"))
 		return -EBUSY;
@@ -2365,27 +2366,28 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port,
 {
 	int ret;
 	struct uart_port *port = &atmel_port->uart;
+	struct platform_device *mpdev = to_platform_device(pdev->dev.parent);
 
 	atmel_init_property(atmel_port, pdev);
 	atmel_set_ops(port);
 
-	uart_get_rs485_mode(&pdev->dev, &port->rs485);
+	uart_get_rs485_mode(&mpdev->dev, &port->rs485);
 
 	port->iotype		= UPIO_MEM;
 	port->flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP;
 	port->ops		= &atmel_pops;
 	port->fifosize		= 1;
 	port->dev		= &pdev->dev;
-	port->mapbase	= pdev->resource[0].start;
-	port->irq	= pdev->resource[1].start;
+	port->mapbase		= mpdev->resource[0].start;
+	port->irq		= mpdev->resource[1].start;
 	port->rs485_config	= atmel_config_rs485;
-	port->membase	= NULL;
+	port->membase		= NULL;
 
 	memset(&atmel_port->rx_ring, 0, sizeof(atmel_port->rx_ring));
 
 	/* for console, the clock could already be configured */
 	if (!atmel_port->clk) {
-		atmel_port->clk = clk_get(&pdev->dev, "usart");
+		atmel_port->clk = clk_get(&mpdev->dev, "usart");
 		if (IS_ERR(atmel_port->clk)) {
 			ret = PTR_ERR(atmel_port->clk);
 			atmel_port->clk = NULL;
@@ -2718,13 +2720,22 @@ static void atmel_serial_probe_fifos(struct atmel_uart_port *atmel_port,
 static int atmel_serial_probe(struct platform_device *pdev)
 {
 	struct atmel_uart_port *atmel_port;
-	struct device_node *np = pdev->dev.of_node;
+	struct device_node *np = pdev->dev.parent->of_node;
 	void *data;
 	int ret = -ENODEV;
 	bool rs485_enabled;
 
 	BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1));
 
+	/*
+	 * In device tree there is no node with "atmel,at91rm9200-usart-serial"
+	 * as compatible string. This driver is probed by at91-usart mfd driver
+	 * which is just a wrapper over the atmel_serial driver and
+	 * spi-at91-usart driver. All attributes needed by this driver are
+	 * found in of_node of parent.
+	 */
+	pdev->dev.of_node = np;
+
 	ret = of_alias_get_id(np, "serial");
 	if (ret < 0)
 		/* port id not found in platform data nor device-tree aliases:
@@ -2860,6 +2871,7 @@ static int atmel_serial_remove(struct platform_device *pdev)
 
 	clk_put(atmel_port->clk);
 	atmel_port->clk = NULL;
+	pdev->dev.of_node = NULL;
 
 	return ret;
 }
@@ -2870,7 +2882,7 @@ static struct platform_driver atmel_serial_driver = {
 	.suspend	= atmel_serial_suspend,
 	.resume		= atmel_serial_resume,
 	.driver		= {
-		.name			= "atmel_usart",
+		.name			= "atmel_usart_serial",
 		.of_match_table		= of_match_ptr(atmel_serial_dt_ids),
 	},
 };
-- 
2.20.1

[PATCH AUTOSEL 4.19 119/205] ARM: dts: exynos: Disable pull control for PMIC IRQ line on Artik5 board

[Sasha Levin]

From: Marek Szyprowski <m.szyprowski@samsung.com>

[ Upstream commit 62623718fd31d08b26ebea6c8b40f24924153ab7 ]

S2MPS14 PMIC interrupt line on Exynos3250-based Artik5 evaluation board
has external pull-up resistors, so disable any pull control for it in
controller node. This fixes support for S2MPS14 PMIC interrupts and
enables operation of wakeup from S2MPS14 RTC alarm.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/exynos3250-artik5.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
index 620b50c19ead9..7c22cbf6f3d41 100644
--- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -69,6 +69,8 @@
 		compatible = "samsung,s2mps14-pmic";
 		interrupt-parent = <&gpx3>;
 		interrupts = <5 IRQ_TYPE_NONE>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&s2mps14_irq>;
 		reg = <0x66>;
 
 		s2mps14_osc: clocks {
@@ -350,6 +352,11 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV3>;
 		samsung,pin-val = <1>;
 	};
+
+	s2mps14_irq: s2mps14-irq {
+		samsung,pins = "gpx3-5";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
 };
 
 &rtc {
-- 
2.20.1

[PATCH AUTOSEL 4.19 120/205] usb: mtu3: disable vbus rise/fall interrupts of ltssm

[Sasha Levin]

From: Chunfeng Yun <chunfeng.yun@mediatek.com>

[ Upstream commit 0eae49582b4dee1a0e96007e1dea5122db98371a ]

The vbus rise & fall interrupts are used to enable and disable
U3 function of device automatically, this cause some issues when
class driver is initialized as deactivated, and will skip over
software-controlled connect by pullup(), but UDC wants to keep
disconnect until usb_gadget_activate() is called which calls
pullup() if needed. So we disable vbus rise & fall interrupts
and just use pullup() to enable & disable U3 function, and reset
mtu3 state when disconnect instead when vbus fall.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/mtu3/mtu3_core.c   |  4 ++--
 drivers/usb/mtu3/mtu3_gadget.c | 22 ++++++++++++++--------
 2 files changed, 16 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c
index 48d10a61e271c..8606935201326 100644
--- a/drivers/usb/mtu3/mtu3_core.c
+++ b/drivers/usb/mtu3/mtu3_core.c
@@ -185,8 +185,8 @@ static void mtu3_intr_enable(struct mtu3 *mtu)
 
 	if (mtu->is_u3_ip) {
 		/* Enable U3 LTSSM interrupts */
-		value = HOT_RST_INTR | WARM_RST_INTR | VBUS_RISE_INTR |
-		    VBUS_FALL_INTR | ENTER_U3_INTR | EXIT_U3_INTR;
+		value = HOT_RST_INTR | WARM_RST_INTR |
+			ENTER_U3_INTR | EXIT_U3_INTR;
 		mtu3_writel(mbase, U3D_LTSSM_INTR_ENABLE, value);
 	}
 
diff --git a/drivers/usb/mtu3/mtu3_gadget.c b/drivers/usb/mtu3/mtu3_gadget.c
index 5c60a8c5a0b5c..bbcd3332471dc 100644
--- a/drivers/usb/mtu3/mtu3_gadget.c
+++ b/drivers/usb/mtu3/mtu3_gadget.c
@@ -585,6 +585,17 @@ static const struct usb_gadget_ops mtu3_gadget_ops = {
 	.udc_stop = mtu3_gadget_stop,
 };
 
+static void mtu3_state_reset(struct mtu3 *mtu)
+{
+	mtu->address = 0;
+	mtu->ep0_state = MU3D_EP0_STATE_SETUP;
+	mtu->may_wakeup = 0;
+	mtu->u1_enable = 0;
+	mtu->u2_enable = 0;
+	mtu->delayed_status = false;
+	mtu->test_mode = false;
+}
+
 static void init_hw_ep(struct mtu3 *mtu, struct mtu3_ep *mep,
 		u32 epnum, u32 is_in)
 {
@@ -702,6 +713,7 @@ void mtu3_gadget_disconnect(struct mtu3 *mtu)
 		spin_lock(&mtu->lock);
 	}
 
+	mtu3_state_reset(mtu);
 	usb_gadget_set_state(&mtu->g, USB_STATE_NOTATTACHED);
 }
 
@@ -712,12 +724,6 @@ void mtu3_gadget_reset(struct mtu3 *mtu)
 	/* report disconnect, if we didn't flush EP state */
 	if (mtu->g.speed != USB_SPEED_UNKNOWN)
 		mtu3_gadget_disconnect(mtu);
-
-	mtu->address = 0;
-	mtu->ep0_state = MU3D_EP0_STATE_SETUP;
-	mtu->may_wakeup = 0;
-	mtu->u1_enable = 0;
-	mtu->u2_enable = 0;
-	mtu->delayed_status = false;
-	mtu->test_mode = false;
+	else
+		mtu3_state_reset(mtu);
 }
-- 
2.20.1

[PATCH AUTOSEL 4.19 121/205] dmaengine: dma-jz4780: Don't depend on MACH_JZ4780

[Sasha Levin]

From: Paul Cercueil <paul@crapouillou.net>

[ Upstream commit c558ecd21c852c97ff98dc6c61f715ba420ec251 ]

If we make this driver depend on MACH_JZ4780, that means it can be
enabled only if we're building a kernel specially crafted for a
JZ4780-based board, while most GNU/Linux distributions will want one
generic MIPS kernel that works on multiple boards.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index dacf3f42426de..a4f95574eb9ad 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -143,7 +143,7 @@ config DMA_JZ4740
 
 config DMA_JZ4780
 	tristate "JZ4780 DMA support"
-	depends on MACH_JZ4780 || COMPILE_TEST
+	depends on MIPS || COMPILE_TEST
 	select DMA_ENGINE
 	select DMA_VIRTUAL_CHANNELS
 	help
-- 
2.20.1

[PATCH AUTOSEL 4.19 122/205] dmaengine: dma-jz4780: Further residue status fix

[Sasha Levin]

From: Daniel Silsby <dansilsby@gmail.com>

[ Upstream commit 83ef4fb7556b6a673f755da670cbacab7e2c7f1b ]

Func jz4780_dma_desc_residue() expects the index to the next hw
descriptor as its last parameter. Caller func jz4780_dma_tx_status(),
however, applied modulus before passing it. When the current hw
descriptor was last in the list, the index passed became zero.

The resulting excess of reported residue especially caused problems
with cyclic DMA transfer clients, i.e. ALSA AIC audio output, which
rely on this for determining current DMA location within buffer.

Combined with the recent and related residue-reporting fixes, spurious
ALSA audio underruns on jz4770 hardware are now fixed.

Signed-off-by: Daniel Silsby <dansilsby@gmail.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/dma-jz4780.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/dma-jz4780.c b/drivers/dma/dma-jz4780.c
index 987899610b461..edff93aacad36 100644
--- a/drivers/dma/dma-jz4780.c
+++ b/drivers/dma/dma-jz4780.c
@@ -587,7 +587,7 @@ static enum dma_status jz4780_dma_tx_status(struct dma_chan *chan,
 					to_jz4780_dma_desc(vdesc), 0);
 	} else if (cookie == jzchan->desc->vdesc.tx.cookie) {
 		txstate->residue = jz4780_dma_desc_residue(jzchan, jzchan->desc,
-			  (jzchan->curr_hwdesc + 1) % jzchan->desc->count);
+					jzchan->curr_hwdesc + 1);
 	} else
 		txstate->residue = 0;
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 123/205] EDAC, sb_edac: Return early on ADDRV bit and address type test

[Sasha Levin]

From: Qiuxu Zhuo <qiuxu.zhuo@intel.com>

[ Upstream commit dcc960b225ceb2bd66c45e0845d03e577f7010f9 ]

Users of the mce_register_decode_chain() are called for every logged
error. EDAC drivers should check:

1) Is this a memory error? [bit 7 in status register]
2) Is there a valid address? [bit 58 in status register]
3) Is the address a system address? [bitfield 8:6 in misc register]

The sb_edac driver performed test "1" twice. Waited far too long to
perform check "2". Didn't do check "3" at all.

Fix it by moving the test for valid address from
sbridge_mce_output_error() into sbridge_mce_check_error() and add a test
for the type immediately after. Delete the redundant check for the type
of the error from sbridge_mce_output_error().

Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Aristeu Rozanski <aris@redhat.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20180907230828.13901-2-tony.luck@intel.com
[ Re-word commit message. ]
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/edac/sb_edac.c | 68 ++++++++++++++++++++++--------------------
 1 file changed, 35 insertions(+), 33 deletions(-)

diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c
index 72cea3cb86224..7447f1453200d 100644
--- a/drivers/edac/sb_edac.c
+++ b/drivers/edac/sb_edac.c
@@ -2912,35 +2912,27 @@ static void sbridge_mce_output_error(struct mem_ctl_info *mci,
 	 *	cccc = channel
 	 * If the mask doesn't match, report an error to the parsing logic
 	 */
-	if (! ((errcode & 0xef80) == 0x80)) {
-		optype = "Can't parse: it is not a mem";
-	} else {
-		switch (optypenum) {
-		case 0:
-			optype = "generic undef request error";
-			break;
-		case 1:
-			optype = "memory read error";
-			break;
-		case 2:
-			optype = "memory write error";
-			break;
-		case 3:
-			optype = "addr/cmd error";
-			break;
-		case 4:
-			optype = "memory scrubbing error";
-			break;
-		default:
-			optype = "reserved";
-			break;
-		}
+	switch (optypenum) {
+	case 0:
+		optype = "generic undef request error";
+		break;
+	case 1:
+		optype = "memory read error";
+		break;
+	case 2:
+		optype = "memory write error";
+		break;
+	case 3:
+		optype = "addr/cmd error";
+		break;
+	case 4:
+		optype = "memory scrubbing error";
+		break;
+	default:
+		optype = "reserved";
+		break;
 	}
 
-	/* Only decode errors with an valid address (ADDRV) */
-	if (!GET_BITFIELD(m->status, 58, 58))
-		return;
-
 	if (pvt->info.type == KNIGHTS_LANDING) {
 		if (channel == 14) {
 			edac_dbg(0, "%s%s err_code:%04x:%04x EDRAM bank %d\n",
@@ -3046,17 +3038,11 @@ static int sbridge_mce_check_error(struct notifier_block *nb, unsigned long val,
 {
 	struct mce *mce = (struct mce *)data;
 	struct mem_ctl_info *mci;
-	struct sbridge_pvt *pvt;
 	char *type;
 
 	if (edac_get_report_status() == EDAC_REPORTING_DISABLED)
 		return NOTIFY_DONE;
 
-	mci = get_mci_for_node_id(mce->socketid, IMC0);
-	if (!mci)
-		return NOTIFY_DONE;
-	pvt = mci->pvt_info;
-
 	/*
 	 * Just let mcelog handle it if the error is
 	 * outside the memory controller. A memory error
@@ -3066,6 +3052,22 @@ static int sbridge_mce_check_error(struct notifier_block *nb, unsigned long val,
 	if ((mce->status & 0xefff) >> 7 != 1)
 		return NOTIFY_DONE;
 
+	/* Check ADDRV bit in STATUS */
+	if (!GET_BITFIELD(mce->status, 58, 58))
+		return NOTIFY_DONE;
+
+	/* Check MISCV bit in STATUS */
+	if (!GET_BITFIELD(mce->status, 59, 59))
+		return NOTIFY_DONE;
+
+	/* Check address type in MISC (physical address only) */
+	if (GET_BITFIELD(mce->misc, 6, 8) != 2)
+		return NOTIFY_DONE;
+
+	mci = get_mci_for_node_id(mce->socketid, IMC0);
+	if (!mci)
+		return NOTIFY_DONE;
+
 	if (mce->mcgstatus & MCG_STATUS_MCIP)
 		type = "Exception";
 	else
-- 
2.20.1

[PATCH AUTOSEL 4.19 124/205] gpio: of: Handle SPI chipselect legacy bindings

[Sasha Levin]

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit 6953c57ab1721ce57914fc5741d0ce0568756bb0 ]

The SPI chipselects are assumed to be active low in the current
binding, so when we want to use GPIO descriptors and handle
the active low/high semantics in gpiolib, we need a special
parsing quirk to deal with this.

We check for the property "spi-cs-high" and if that is
NOT present we assume the CS line is active low.

If the line is tagged as active low in the device tree and
has no "spi-cs-high" property all is fine, the device
tree and the SPI bindings are in agreement.

If the line is tagged as active high in the device tree with
the second cell flag and has no "spi-cs-high" property we
enforce active low semantics (as this is the exception we can
just tag on the flag).

If the line is tagged as active low with the second cell flag
AND tagged with "spi-cs-high" the SPI active high property
takes precedence and we print a warning.

Cc: Mark Brown <broonie@kernel.org>
Cc: linux-spi@vger.kernel.org
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpio/gpiolib-of.c | 50 +++++++++++++++++++++++++++++++++++++--
 1 file changed, 48 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index e0f149bdf98ff..fa212c2a7577c 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -58,7 +58,8 @@ static struct gpio_desc *of_xlate_and_get_gpiod_flags(struct gpio_chip *chip,
 }
 
 static void of_gpio_flags_quirks(struct device_node *np,
-				 enum of_gpio_flags *flags)
+				 enum of_gpio_flags *flags,
+				 int index)
 {
 	/*
 	 * Some GPIO fixed regulator quirks.
@@ -92,6 +93,51 @@ static void of_gpio_flags_quirks(struct device_node *np,
 		pr_info("%s uses legacy open drain flag - update the DTS if you can\n",
 			of_node_full_name(np));
 	}
+
+	/*
+	 * Legacy handling of SPI active high chip select. If we have a
+	 * property named "cs-gpios" we need to inspect the child node
+	 * to determine if the flags should have inverted semantics.
+	 */
+	if (IS_ENABLED(CONFIG_SPI_MASTER) &&
+	    of_property_read_bool(np, "cs-gpios")) {
+		struct device_node *child;
+		u32 cs;
+		int ret;
+
+		for_each_child_of_node(np, child) {
+			ret = of_property_read_u32(child, "reg", &cs);
+			if (!ret)
+				continue;
+			if (cs == index) {
+				/*
+				 * SPI children have active low chip selects
+				 * by default. This can be specified negatively
+				 * by just omitting "spi-cs-high" in the
+				 * device node, or actively by tagging on
+				 * GPIO_ACTIVE_LOW as flag in the device
+				 * tree. If the line is simultaneously
+				 * tagged as active low in the device tree
+				 * and has the "spi-cs-high" set, we get a
+				 * conflict and the "spi-cs-high" flag will
+				 * take precedence.
+				 */
+				if (of_property_read_bool(np, "spi-cs-high")) {
+					if (*flags & OF_GPIO_ACTIVE_LOW) {
+						pr_warn("%s GPIO handle specifies active low - ignored\n",
+							of_node_full_name(np));
+						*flags &= ~OF_GPIO_ACTIVE_LOW;
+					}
+				} else {
+					if (!(*flags & OF_GPIO_ACTIVE_LOW))
+						pr_info("%s enforce active low on chipselect handle\n",
+							of_node_full_name(np));
+					*flags |= OF_GPIO_ACTIVE_LOW;
+				}
+				break;
+			}
+		}
+	}
 }
 
 /**
@@ -132,7 +178,7 @@ struct gpio_desc *of_get_named_gpiod_flags(struct device_node *np,
 		goto out;
 
 	if (flags)
-		of_gpio_flags_quirks(np, flags);
+		of_gpio_flags_quirks(np, flags, index);
 
 	pr_debug("%s: parsed '%s' property of node '%pOF[%d]' - status (%d)\n",
 		 __func__, propname, np, index,
-- 
2.20.1

Re: [PATCH AUTOSEL 4.19 124/205] gpio: of: Handle SPI chipselect legacy bindings

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 639 bytes --]

On Fri, Nov 08, 2019 at 06:36:31AM -0500, Sasha Levin wrote:
> From: Linus Walleij <linus.walleij@linaro.org>
> 
> [ Upstream commit 6953c57ab1721ce57914fc5741d0ce0568756bb0 ]
> 
> The SPI chipselects are assumed to be active low in the current
> binding, so when we want to use GPIO descriptors and handle
> the active low/high semantics in gpiolib, we need a special
> parsing quirk to deal with this.

This stuff is *incredibly* fragile, are we sure this isn't manifiesting
in later kernels as a result of some other fix or cleanup exposing
issues and won't break without that fixup?  I loose track of all the
GPIO stuff.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

[PATCH AUTOSEL 4.19 125/205] rtc: mt6397: fix possible race condition

[Sasha Levin]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

[ Upstream commit babab2f86440352d24e76118fdd7d40cab5fd7bf ]

The IRQ is requested before the struct rtc is allocated and registered, but
this struct is used in the IRQ handler. This may lead to a NULL pointer
dereference.

Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc
before requesting the IRQ.

Acked-by: Eddie Huang <eddie.huang@mediatek.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-mt6397.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
index 385f8303bb412..e9a25ec4d434f 100644
--- a/drivers/rtc/rtc-mt6397.c
+++ b/drivers/rtc/rtc-mt6397.c
@@ -332,6 +332,10 @@ static int mtk_rtc_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, rtc);
 
+	rtc->rtc_dev = devm_rtc_allocate_device(rtc->dev);
+	if (IS_ERR(rtc->rtc_dev))
+		return PTR_ERR(rtc->rtc_dev);
+
 	ret = request_threaded_irq(rtc->irq, NULL,
 				   mtk_rtc_irq_handler_thread,
 				   IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
@@ -344,11 +348,11 @@ static int mtk_rtc_probe(struct platform_device *pdev)
 
 	device_init_wakeup(&pdev->dev, 1);
 
-	rtc->rtc_dev = rtc_device_register("mt6397-rtc", &pdev->dev,
-					   &mtk_rtc_ops, THIS_MODULE);
-	if (IS_ERR(rtc->rtc_dev)) {
+	rtc->rtc_dev->ops = &mtk_rtc_ops;
+
+	ret = rtc_register_device(rtc->rtc_dev);
+	if (ret) {
 		dev_err(&pdev->dev, "register rtc device failed\n");
-		ret = PTR_ERR(rtc->rtc_dev);
 		goto out_free_irq;
 	}
 
@@ -365,7 +369,6 @@ static int mtk_rtc_remove(struct platform_device *pdev)
 {
 	struct mt6397_rtc *rtc = platform_get_drvdata(pdev);
 
-	rtc_device_unregister(rtc->rtc_dev);
 	free_irq(rtc->irq, rtc->rtc_dev);
 	irq_dispose_mapping(rtc->irq);
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 126/205] rtc: pl030: fix possible race condition

[Sasha Levin]

From: Alexandre Belloni <alexandre.belloni@bootlin.com>

[ Upstream commit c778ec85825dc895936940072aea9fe9037db684 ]

The IRQ is requested before the struct rtc is allocated and registered, but
this struct is used in the IRQ handler. This may lead to a NULL pointer
dereference.

Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc
before requesting the IRQ.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/rtc/rtc-pl030.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/rtc/rtc-pl030.c b/drivers/rtc/rtc-pl030.c
index f85a1a93e669f..343bb6ed17839 100644
--- a/drivers/rtc/rtc-pl030.c
+++ b/drivers/rtc/rtc-pl030.c
@@ -112,6 +112,13 @@ static int pl030_probe(struct amba_device *dev, const struct amba_id *id)
 		goto err_rtc;
 	}
 
+	rtc->rtc = devm_rtc_allocate_device(&dev->dev);
+	if (IS_ERR(rtc->rtc)) {
+		ret = PTR_ERR(rtc->rtc);
+		goto err_rtc;
+	}
+
+	rtc->rtc->ops = &pl030_ops;
 	rtc->base = ioremap(dev->res.start, resource_size(&dev->res));
 	if (!rtc->base) {
 		ret = -ENOMEM;
@@ -128,12 +135,9 @@ static int pl030_probe(struct amba_device *dev, const struct amba_id *id)
 	if (ret)
 		goto err_irq;
 
-	rtc->rtc = rtc_device_register("pl030", &dev->dev, &pl030_ops,
-				       THIS_MODULE);
-	if (IS_ERR(rtc->rtc)) {
-		ret = PTR_ERR(rtc->rtc);
+	ret = rtc_register_device(rtc->rtc);
+	if (ret)
 		goto err_reg;
-	}
 
 	return 0;
 
@@ -154,7 +158,6 @@ static int pl030_remove(struct amba_device *dev)
 	writel(0, rtc->base + RTC_CR);
 
 	free_irq(dev->irq[0], rtc);
-	rtc_device_unregister(rtc->rtc);
 	iounmap(rtc->base);
 	amba_release_regions(dev);
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 127/205] ath9k: add back support for using active monitor interfaces for tx99

[Sasha Levin]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit 6df0580be8bc30803c4d8b2ed9c2230a2740c795 ]

Various documented examples on how to set up tx99 with ath9k rely
on setting up a regular monitor interface for setting the channel.
My previous patch "ath9k: fix tx99 with monitor mode interface" made
it possible to set it up this way again. However, it was removing support
for using an active monitor interface, which is required for controlling
the bitrate as well, since the bitrate is not passed down with a regular
monitor interface.

This patch partially reverts the previous one, but keeps support for using
a regular monitor interface to keep documented steps working in cases
where the bitrate does not matter

Fixes: d9c52fd17cb48 ("ath9k: fix tx99 with monitor mode interface")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/ath9k.h |  1 +
 drivers/net/wireless/ath/ath9k/main.c  | 10 ++++++++--
 drivers/net/wireless/ath/ath9k/tx99.c  |  7 +++++++
 drivers/net/wireless/ath/ath9k/xmit.c  |  2 +-
 4 files changed, 17 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 50206a6d8a850..0fca44e91a712 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -1074,6 +1074,7 @@ struct ath_softc {
 
 	struct ath_spec_scan_priv spec_priv;
 
+	struct ieee80211_vif *tx99_vif;
 	struct sk_buff *tx99_skb;
 	bool tx99_state;
 	s16 tx99_power;
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 6ce4b9f1dcb44..c85f613e8ceb5 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1251,8 +1251,13 @@ static int ath9k_add_interface(struct ieee80211_hw *hw,
 	struct ath_vif *avp = (void *)vif->drv_priv;
 	struct ath_node *an = &avp->mcast_node;
 
-	if (IS_ENABLED(CONFIG_ATH9K_TX99))
-		return -EOPNOTSUPP;
+	if (IS_ENABLED(CONFIG_ATH9K_TX99)) {
+		if (sc->cur_chan->nvifs >= 1) {
+			mutex_unlock(&sc->mutex);
+			return -EOPNOTSUPP;
+		}
+		sc->tx99_vif = vif;
+	}
 
 	mutex_lock(&sc->mutex);
 
@@ -1337,6 +1342,7 @@ static void ath9k_remove_interface(struct ieee80211_hw *hw,
 	ath9k_p2p_remove_vif(sc, vif);
 
 	sc->cur_chan->nvifs--;
+	sc->tx99_vif = NULL;
 	if (!ath9k_is_chanctx_enabled())
 		list_del(&avp->list);
 
diff --git a/drivers/net/wireless/ath/ath9k/tx99.c b/drivers/net/wireless/ath/ath9k/tx99.c
index 9b05ffb68c34a..95544ce05acf9 100644
--- a/drivers/net/wireless/ath/ath9k/tx99.c
+++ b/drivers/net/wireless/ath/ath9k/tx99.c
@@ -54,6 +54,7 @@ static struct sk_buff *ath9k_build_tx99_skb(struct ath_softc *sc)
 	struct ieee80211_hdr *hdr;
 	struct ieee80211_tx_info *tx_info;
 	struct sk_buff *skb;
+	struct ath_vif *avp;
 
 	skb = alloc_skb(len, GFP_KERNEL);
 	if (!skb)
@@ -71,11 +72,17 @@ static struct sk_buff *ath9k_build_tx99_skb(struct ath_softc *sc)
 	memcpy(hdr->addr2, hw->wiphy->perm_addr, ETH_ALEN);
 	memcpy(hdr->addr3, hw->wiphy->perm_addr, ETH_ALEN);
 
+	if (sc->tx99_vif) {
+		avp = (struct ath_vif *) sc->tx99_vif->drv_priv;
+		hdr->seq_ctrl |= cpu_to_le16(avp->seq_no);
+	}
+
 	tx_info = IEEE80211_SKB_CB(skb);
 	memset(tx_info, 0, sizeof(*tx_info));
 	rate = &tx_info->control.rates[0];
 	tx_info->band = sc->cur_chan->chandef.chan->band;
 	tx_info->flags = IEEE80211_TX_CTL_NO_ACK;
+	tx_info->control.vif = sc->tx99_vif;
 	rate->count = 1;
 	if (ah->curchan && IS_CHAN_HT(ah->curchan)) {
 		rate->flags |= IEEE80211_TX_RC_MCS;
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 3ae8d0585b6f3..4b7a7fc2a0fe0 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -2974,7 +2974,7 @@ int ath9k_tx99_send(struct ath_softc *sc, struct sk_buff *skb,
 		return -EINVAL;
 	}
 
-	ath_set_rates(NULL, NULL, bf);
+	ath_set_rates(sc->tx99_vif, NULL, bf);
 
 	ath9k_hw_set_desc_link(sc->sc_ah, bf->bf_desc, bf->bf_daddr);
 	ath9k_hw_tx99_start(sc->sc_ah, txctl->txq->axq_qnum);
-- 
2.20.1

[PATCH AUTOSEL 4.19 128/205] dmaengine: at_xdmac: remove a stray bottom half unlock

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 0b515abb6b7eb08e90bdfc01fc8fbdd112c15d81 ]

We switched this code from spin_lock_bh() to vanilla spin_lock() but
there was one stray spin_unlock_bh() that was overlooked.  This
patch converts it to spin_unlock() as well.

Fixes: d8570d018f69 ("dmaengine: at_xdmac: move spin_lock_bh to spin_lock in tasklet")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/at_xdmac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c
index db5b8fe1dd4ab..7db66f974041e 100644
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -1608,7 +1608,7 @@ static void at_xdmac_tasklet(unsigned long data)
 		dev_vdbg(chan2dev(&atchan->chan), "%s: desc 0x%p\n", __func__, desc);
 		if (!desc->active_xfer) {
 			dev_err(chan2dev(&atchan->chan), "Xfer not active: exiting");
-			spin_unlock_bh(&atchan->lock);
+			spin_unlock(&atchan->lock);
 			return;
 		}
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 128/205] dmaengine: at_xdmac: remove a stray bottom half unlock

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 0b515abb6b7eb08e90bdfc01fc8fbdd112c15d81 ]

We switched this code from spin_lock_bh() to vanilla spin_lock() but
there was one stray spin_unlock_bh() that was overlooked.  This
patch converts it to spin_unlock() as well.

Fixes: d8570d018f69 ("dmaengine: at_xdmac: move spin_lock_bh to spin_lock in tasklet")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/at_xdmac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c
index db5b8fe1dd4ab..7db66f974041e 100644
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -1608,7 +1608,7 @@ static void at_xdmac_tasklet(unsigned long data)
 		dev_vdbg(chan2dev(&atchan->chan), "%s: desc 0x%p\n", __func__, desc);
 		if (!desc->active_xfer) {
 			dev_err(chan2dev(&atchan->chan), "Xfer not active: exiting");
-			spin_unlock_bh(&atchan->lock);
+			spin_unlock(&atchan->lock);
 			return;
 		}
 
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 4.19 129/205] RDMA/hns: Fix an error code in hns_roce_v2_init_eq_table()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit f1a315420e79fe5c077fa119db9439ffabd2cda2 ]

The error code isn't set on this path.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
index a442b29e76119..72cfd8c56527e 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
@@ -5117,6 +5117,7 @@ static int hns_roce_v2_init_eq_table(struct hns_roce_dev *hr_dev)
 		create_singlethread_workqueue("hns_roce_irq_workqueue");
 	if (!hr_dev->irq_workq) {
 		dev_err(dev, "Create irq workqueue failed!\n");
+		ret = -ENOMEM;
 		goto err_request_irq_fail;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 130/205] IB/hfi1: Missing return value in error path for user sdma

[Sasha Levin]

From: "Michael J. Ruhl" <michael.j.ruhl@intel.com>

[ Upstream commit 2bf4b33f83dfe521c4c7c407b6b150aeec04d69c ]

If the set_txreq_header_agh() function returns an error, the exit path
is chosen.

In this path, the code fails to set the return value.  This will cause
the caller to not realize an error has occurred.

Set the return value correctly in the error path.

Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/hw/hfi1/user_sdma.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/hfi1/user_sdma.c b/drivers/infiniband/hw/hfi1/user_sdma.c
index cbff746d9e9de..684a298e15037 100644
--- a/drivers/infiniband/hw/hfi1/user_sdma.c
+++ b/drivers/infiniband/hw/hfi1/user_sdma.c
@@ -856,8 +856,10 @@ static int user_sdma_send_pkts(struct user_sdma_request *req, unsigned maxpkts)
 
 				changes = set_txreq_header_ahg(req, tx,
 							       datalen);
-				if (changes < 0)
+				if (changes < 0) {
+					ret = changes;
 					goto free_tx;
+				}
 			}
 		} else {
 			ret = sdma_txinit(&tx->txreq, 0, sizeof(req->hdr) +
-- 
2.20.1

[PATCH AUTOSEL 4.19 131/205] signal: Always ignore SIGKILL and SIGSTOP sent to the global init

[Sasha Levin]

From: "Eric W. Biederman" <ebiederm@xmission.com>

[ Upstream commit 86989c41b5ea08776c450cb759592532314a4ed6 ]

If the first process started (aka /sbin/init) receives a SIGKILL it
will panic the system if it is delivered.  Making the system unusable
and undebugable.  It isn't much better if the first process started
receives SIGSTOP.

So always ignore SIGSTOP and SIGKILL sent to init.

This is done in a separate clause in sig_task_ignored as force_sig_info
can clear SIG_UNKILLABLE and this protection should work even then.

Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/signal.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/kernel/signal.c b/kernel/signal.c
index 0e6bc3049427e..7278302e34850 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -78,6 +78,10 @@ static bool sig_task_ignored(struct task_struct *t, int sig, bool force)
 
 	handler = sig_handler(t, sig);
 
+	/* SIGKILL and SIGSTOP may not be sent to the global init */
+	if (unlikely(is_global_init(t) && sig_kernel_only(sig)))
+		return true;
+
 	if (unlikely(t->signal->flags & SIGNAL_UNKILLABLE) &&
 	    handler == SIG_DFL && !(force && sig_kernel_only(sig)))
 		return true;
-- 
2.20.1

[PATCH AUTOSEL 4.19 132/205] signal: Properly deliver SIGILL from uprobes

[Sasha Levin]

From: "Eric W. Biederman" <ebiederm@xmission.com>

[ Upstream commit 55a3235fc71bf34303e34a95eeee235b2d2a35dd ]

For userspace to tell the difference between a random signal and an
exception, the exception must include siginfo information.

Using SEND_SIG_FORCED for SIGILL is thus wrong, and it will result
in userspace seeing si_code == SI_USER (like a random signal) instead
of si_code == SI_KERNEL or a more specific si_code as all exceptions
deliver.

Therefore replace force_sig_info(SIGILL, SEND_SIG_FORCE, current)
with force_sig(SIG_ILL, current) which gets this right and is
shorter and easier to type.

Fixes: 014940bad8e4 ("uprobes/x86: Send SIGILL if arch_uprobe_post_xol() fails")
Fixes: 0b5256c7f173 ("uprobes: Send SIGILL if handle_trampoline() fails")
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/events/uprobes.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c
index 578d4ac54484f..c173e4131df88 100644
--- a/kernel/events/uprobes.c
+++ b/kernel/events/uprobes.c
@@ -1858,7 +1858,7 @@ static void handle_trampoline(struct pt_regs *regs)
 
  sigill:
 	uprobe_warn(current, "handle uretprobe, sending SIGILL.");
-	force_sig_info(SIGILL, SEND_SIG_FORCED, current);
+	force_sig(SIGILL, current);
 
 }
 
@@ -1974,7 +1974,7 @@ static void handle_singlestep(struct uprobe_task *utask, struct pt_regs *regs)
 
 	if (unlikely(err)) {
 		uprobe_warn(current, "execute the probed insn, sending SIGILL.");
-		force_sig_info(SIGILL, SEND_SIG_FORCED, current);
+		force_sig(SIGILL, current);
 	}
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 133/205] signal: Properly deliver SIGSEGV from x86 uprobes

[Sasha Levin]

From: "Eric W. Biederman" <ebiederm@xmission.com>

[ Upstream commit 4a63c1ffd384ebdce40aac9c997dab68379137be ]

For userspace to tell the difference between an random signal
and an exception, the exception must include siginfo information.

Using SEND_SIG_FORCED for SIGSEGV is thus wrong, and it will result in
userspace seeing si_code == SI_USER (like a random signal) instead of
si_code == SI_KERNEL or a more specific si_code as all exceptions
deliver.

Therefore replace force_sig_info(SIGSEGV, SEND_SIG_FORCE, current)
with force_sig(SIG_SEGV, current) which gets this right and is shorter
and easier to type.

Fixes: 791eca10107f ("uretprobes/x86: Hijack return address")
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/x86/kernel/uprobes.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/uprobes.c b/arch/x86/kernel/uprobes.c
index 9119859ba7871..420aa7d3a2e6b 100644
--- a/arch/x86/kernel/uprobes.c
+++ b/arch/x86/kernel/uprobes.c
@@ -1089,7 +1089,7 @@ arch_uretprobe_hijack_return_addr(unsigned long trampoline_vaddr, struct pt_regs
 		pr_err("return address clobbered: pid=%d, %%sp=%#lx, %%ip=%#lx\n",
 		       current->pid, regs->sp, regs->ip);
 
-		force_sig_info(SIGSEGV, SEND_SIG_FORCED, current);
+		force_sig(SIGSEGV, current);
 	}
 
 	return -1;
-- 
2.20.1

[PATCH AUTOSEL 4.19 134/205] f2fs: fix memory leak of write_io in fill_super()

[Sasha Levin]

From: Chao Yu <yuchao0@huawei.com>

[ Upstream commit 0b2103e886e6de9802e1170e57c573443286a483 ]

It needs to release memory allocated for sbi->write_io in error path,
otherwise, it will cause memory leak.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/super.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index 6851afc3bf805..588c575bd72b0 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -2923,7 +2923,7 @@ try_onemore:
 				     GFP_KERNEL);
 		if (!sbi->write_io[i]) {
 			err = -ENOMEM;
-			goto free_options;
+			goto free_bio_info;
 		}
 
 		for (j = HOT; j < n; j++) {
-- 
2.20.1

[f2fs-dev] [PATCH AUTOSEL 4.19 134/205] f2fs: fix memory leak of write_io in fill_super()

[Sasha Levin]

From: Chao Yu <yuchao0@huawei.com>

[ Upstream commit 0b2103e886e6de9802e1170e57c573443286a483 ]

It needs to release memory allocated for sbi->write_io in error path,
otherwise, it will cause memory leak.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/super.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index 6851afc3bf805..588c575bd72b0 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -2923,7 +2923,7 @@ try_onemore:
 				     GFP_KERNEL);
 		if (!sbi->write_io[i]) {
 			err = -ENOMEM;
-			goto free_options;
+			goto free_bio_info;
 		}
 
 		for (j = HOT; j < n; j++) {
-- 
2.20.1



_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel

[PATCH AUTOSEL 4.19 135/205] f2fs: fix memory leak of percpu counter in fill_super()

[Sasha Levin]

From: Chao Yu <yuchao0@huawei.com>

[ Upstream commit 4a70e255449c9a13eed7a6eeecc85a1ea63cef76 ]

In fill_super -> init_percpu_info, we should destroy percpu counter
in error path, otherwise memory allcoated for percpu counter will
leak.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/super.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index 588c575bd72b0..18534d03d112b 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -2510,8 +2510,12 @@ static int init_percpu_info(struct f2fs_sb_info *sbi)
 	if (err)
 		return err;
 
-	return percpu_counter_init(&sbi->total_valid_inode_count, 0,
+	err = percpu_counter_init(&sbi->total_valid_inode_count, 0,
 								GFP_KERNEL);
+	if (err)
+		percpu_counter_destroy(&sbi->alloc_valid_block_count);
+
+	return err;
 }
 
 #ifdef CONFIG_BLK_DEV_ZONED
-- 
2.20.1

[f2fs-dev] [PATCH AUTOSEL 4.19 135/205] f2fs: fix memory leak of percpu counter in fill_super()

[Sasha Levin]

From: Chao Yu <yuchao0@huawei.com>

[ Upstream commit 4a70e255449c9a13eed7a6eeecc85a1ea63cef76 ]

In fill_super -> init_percpu_info, we should destroy percpu counter
in error path, otherwise memory allcoated for percpu counter will
leak.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/super.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index 588c575bd72b0..18534d03d112b 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -2510,8 +2510,12 @@ static int init_percpu_info(struct f2fs_sb_info *sbi)
 	if (err)
 		return err;
 
-	return percpu_counter_init(&sbi->total_valid_inode_count, 0,
+	err = percpu_counter_init(&sbi->total_valid_inode_count, 0,
 								GFP_KERNEL);
+	if (err)
+		percpu_counter_destroy(&sbi->alloc_valid_block_count);
+
+	return err;
 }
 
 #ifdef CONFIG_BLK_DEV_ZONED
-- 
2.20.1



_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel

[PATCH AUTOSEL 4.19 136/205] f2fs: fix setattr project check upon fssetxattr ioctl

[Sasha Levin]

From: Wang Shilong <wangshilong1991@gmail.com>

[ Upstream commit c8e927579e00a182eda07e4c45df9c8c699c8ded ]

Currently, project quota could be changed by fssetxattr
ioctl, and existed permission check inode_owner_or_capable()
is obviously not enough, just think that common users could
change project id of file, that could make users to
break project quota easily.

This patch try to follow same regular of xfs project
quota:

"Project Quota ID state is only allowed to change from
within the init namespace. Enforce that restriction only
if we are trying to change the quota ID state.
Everything else is allowed in user namespaces."

Besides that, check and set project id'state should
be an atomic operation, protect whole operation with
inode lock.

Signed-off-by: Wang Shilong <wshilong@ddn.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/file.c | 60 +++++++++++++++++++++++++++++++-------------------
 1 file changed, 37 insertions(+), 23 deletions(-)

diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index 6972c6d7c3893..c7ea122997695 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -2618,34 +2618,26 @@ static int f2fs_ioc_setproject(struct file *filp, __u32 projid)
 	if (projid_eq(kprojid, F2FS_I(inode)->i_projid))
 		return 0;
 
-	err = mnt_want_write_file(filp);
-	if (err)
-		return err;
-
 	err = -EPERM;
-	inode_lock(inode);
-
 	/* Is it quota file? Do not allow user to mess with it */
 	if (IS_NOQUOTA(inode))
-		goto out_unlock;
+		return err;
 
 	ipage = f2fs_get_node_page(sbi, inode->i_ino);
-	if (IS_ERR(ipage)) {
-		err = PTR_ERR(ipage);
-		goto out_unlock;
-	}
+	if (IS_ERR(ipage))
+		return PTR_ERR(ipage);
 
 	if (!F2FS_FITS_IN_INODE(F2FS_INODE(ipage), fi->i_extra_isize,
 								i_projid)) {
 		err = -EOVERFLOW;
 		f2fs_put_page(ipage, 1);
-		goto out_unlock;
+		return err;
 	}
 	f2fs_put_page(ipage, 1);
 
 	err = dquot_initialize(inode);
 	if (err)
-		goto out_unlock;
+		return err;
 
 	transfer_to[PRJQUOTA] = dqget(sb, make_kqid_projid(kprojid));
 	if (!IS_ERR(transfer_to[PRJQUOTA])) {
@@ -2659,9 +2651,6 @@ static int f2fs_ioc_setproject(struct file *filp, __u32 projid)
 	inode->i_ctime = current_time(inode);
 out_dirty:
 	f2fs_mark_inode_dirty_sync(inode, true);
-out_unlock:
-	inode_unlock(inode);
-	mnt_drop_write_file(filp);
 	return err;
 }
 #else
@@ -2737,6 +2726,30 @@ static int f2fs_ioc_fsgetxattr(struct file *filp, unsigned long arg)
 	return 0;
 }
 
+static int f2fs_ioctl_check_project(struct inode *inode, struct fsxattr *fa)
+{
+	/*
+	 * Project Quota ID state is only allowed to change from within the init
+	 * namespace. Enforce that restriction only if we are trying to change
+	 * the quota ID state. Everything else is allowed in user namespaces.
+	 */
+	if (current_user_ns() == &init_user_ns)
+		return 0;
+
+	if (__kprojid_val(F2FS_I(inode)->i_projid) != fa->fsx_projid)
+		return -EINVAL;
+
+	if (F2FS_I(inode)->i_flags & F2FS_PROJINHERIT_FL) {
+		if (!(fa->fsx_xflags & FS_XFLAG_PROJINHERIT))
+			return -EINVAL;
+	} else {
+		if (fa->fsx_xflags & FS_XFLAG_PROJINHERIT)
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
 static int f2fs_ioc_fssetxattr(struct file *filp, unsigned long arg)
 {
 	struct inode *inode = file_inode(filp);
@@ -2764,19 +2777,20 @@ static int f2fs_ioc_fssetxattr(struct file *filp, unsigned long arg)
 		return err;
 
 	inode_lock(inode);
+	err = f2fs_ioctl_check_project(inode, &fa);
+	if (err)
+		goto out;
 	flags = (fi->i_flags & ~F2FS_FL_XFLAG_VISIBLE) |
 				(flags & F2FS_FL_XFLAG_VISIBLE);
 	err = __f2fs_ioc_setflags(inode, flags);
-	inode_unlock(inode);
-	mnt_drop_write_file(filp);
 	if (err)
-		return err;
+		goto out;
 
 	err = f2fs_ioc_setproject(filp, fa.fsx_projid);
-	if (err)
-		return err;
-
-	return 0;
+out:
+	inode_unlock(inode);
+	mnt_drop_write_file(filp);
+	return err;
 }
 
 int f2fs_pin_file_control(struct inode *inode, bool inc)
-- 
2.20.1

[f2fs-dev] [PATCH AUTOSEL 4.19 136/205] f2fs: fix setattr project check upon fssetxattr ioctl

[Sasha Levin]

From: Wang Shilong <wangshilong1991@gmail.com>

[ Upstream commit c8e927579e00a182eda07e4c45df9c8c699c8ded ]

Currently, project quota could be changed by fssetxattr
ioctl, and existed permission check inode_owner_or_capable()
is obviously not enough, just think that common users could
change project id of file, that could make users to
break project quota easily.

This patch try to follow same regular of xfs project
quota:

"Project Quota ID state is only allowed to change from
within the init namespace. Enforce that restriction only
if we are trying to change the quota ID state.
Everything else is allowed in user namespaces."

Besides that, check and set project id'state should
be an atomic operation, protect whole operation with
inode lock.

Signed-off-by: Wang Shilong <wshilong@ddn.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/f2fs/file.c | 60 +++++++++++++++++++++++++++++++-------------------
 1 file changed, 37 insertions(+), 23 deletions(-)

diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c
index 6972c6d7c3893..c7ea122997695 100644
--- a/fs/f2fs/file.c
+++ b/fs/f2fs/file.c
@@ -2618,34 +2618,26 @@ static int f2fs_ioc_setproject(struct file *filp, __u32 projid)
 	if (projid_eq(kprojid, F2FS_I(inode)->i_projid))
 		return 0;
 
-	err = mnt_want_write_file(filp);
-	if (err)
-		return err;
-
 	err = -EPERM;
-	inode_lock(inode);
-
 	/* Is it quota file? Do not allow user to mess with it */
 	if (IS_NOQUOTA(inode))
-		goto out_unlock;
+		return err;
 
 	ipage = f2fs_get_node_page(sbi, inode->i_ino);
-	if (IS_ERR(ipage)) {
-		err = PTR_ERR(ipage);
-		goto out_unlock;
-	}
+	if (IS_ERR(ipage))
+		return PTR_ERR(ipage);
 
 	if (!F2FS_FITS_IN_INODE(F2FS_INODE(ipage), fi->i_extra_isize,
 								i_projid)) {
 		err = -EOVERFLOW;
 		f2fs_put_page(ipage, 1);
-		goto out_unlock;
+		return err;
 	}
 	f2fs_put_page(ipage, 1);
 
 	err = dquot_initialize(inode);
 	if (err)
-		goto out_unlock;
+		return err;
 
 	transfer_to[PRJQUOTA] = dqget(sb, make_kqid_projid(kprojid));
 	if (!IS_ERR(transfer_to[PRJQUOTA])) {
@@ -2659,9 +2651,6 @@ static int f2fs_ioc_setproject(struct file *filp, __u32 projid)
 	inode->i_ctime = current_time(inode);
 out_dirty:
 	f2fs_mark_inode_dirty_sync(inode, true);
-out_unlock:
-	inode_unlock(inode);
-	mnt_drop_write_file(filp);
 	return err;
 }
 #else
@@ -2737,6 +2726,30 @@ static int f2fs_ioc_fsgetxattr(struct file *filp, unsigned long arg)
 	return 0;
 }
 
+static int f2fs_ioctl_check_project(struct inode *inode, struct fsxattr *fa)
+{
+	/*
+	 * Project Quota ID state is only allowed to change from within the init
+	 * namespace. Enforce that restriction only if we are trying to change
+	 * the quota ID state. Everything else is allowed in user namespaces.
+	 */
+	if (current_user_ns() == &init_user_ns)
+		return 0;
+
+	if (__kprojid_val(F2FS_I(inode)->i_projid) != fa->fsx_projid)
+		return -EINVAL;
+
+	if (F2FS_I(inode)->i_flags & F2FS_PROJINHERIT_FL) {
+		if (!(fa->fsx_xflags & FS_XFLAG_PROJINHERIT))
+			return -EINVAL;
+	} else {
+		if (fa->fsx_xflags & FS_XFLAG_PROJINHERIT)
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
 static int f2fs_ioc_fssetxattr(struct file *filp, unsigned long arg)
 {
 	struct inode *inode = file_inode(filp);
@@ -2764,19 +2777,20 @@ static int f2fs_ioc_fssetxattr(struct file *filp, unsigned long arg)
 		return err;
 
 	inode_lock(inode);
+	err = f2fs_ioctl_check_project(inode, &fa);
+	if (err)
+		goto out;
 	flags = (fi->i_flags & ~F2FS_FL_XFLAG_VISIBLE) |
 				(flags & F2FS_FL_XFLAG_VISIBLE);
 	err = __f2fs_ioc_setflags(inode, flags);
-	inode_unlock(inode);
-	mnt_drop_write_file(filp);
 	if (err)
-		return err;
+		goto out;
 
 	err = f2fs_ioc_setproject(filp, fa.fsx_projid);
-	if (err)
-		return err;
-
-	return 0;
+out:
+	inode_unlock(inode);
+	mnt_drop_write_file(filp);
+	return err;
 }
 
 int f2fs_pin_file_control(struct inode *inode, bool inc)
-- 
2.20.1



_______________________________________________
Linux-f2fs-devel mailing list
Linux-f2fs-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-f2fs-devel

[PATCH AUTOSEL 4.19 137/205] scsi: qla2xxx: Use correct qpair for ABTS/CMD

[Sasha Levin]

From: Quinn Tran <quinn.tran@cavium.com>

[ Upstream commit 49cecca7dd49e2950ed6d973acfa84e7c8c7a480 ]

On Abort of initiator scsi command, the abort needs to follow the same qpair
as the the scsi command to prevent out of order processing.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_init.c | 15 +++++----------
 drivers/scsi/qla2xxx/qla_iocb.c | 12 +++++++-----
 2 files changed, 12 insertions(+), 15 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index bee9cfb291529..e5ecef94aebdb 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1772,18 +1772,18 @@ int
 qla24xx_async_abort_cmd(srb_t *cmd_sp, bool wait)
 {
 	scsi_qla_host_t *vha = cmd_sp->vha;
-	fc_port_t *fcport = cmd_sp->fcport;
 	struct srb_iocb *abt_iocb;
 	srb_t *sp;
 	int rval = QLA_FUNCTION_FAILED;
 
-	sp = qla2x00_get_sp(vha, fcport, GFP_KERNEL);
+	sp = qla2xxx_get_qpair_sp(cmd_sp->qpair, cmd_sp->fcport, GFP_KERNEL);
 	if (!sp)
 		goto done;
 
 	abt_iocb = &sp->u.iocb_cmd;
 	sp->type = SRB_ABT_CMD;
 	sp->name = "abort";
+	sp->qpair = cmd_sp->qpair;
 	if (wait)
 		sp->flags = SRB_WAKEUP_ON_COMP;
 
@@ -1792,18 +1792,13 @@ qla24xx_async_abort_cmd(srb_t *cmd_sp, bool wait)
 	qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha));
 
 	abt_iocb->u.abt.cmd_hndl = cmd_sp->handle;
-
-	if (vha->flags.qpairs_available && cmd_sp->qpair)
-		abt_iocb->u.abt.req_que_no =
-		    cpu_to_le16(cmd_sp->qpair->req->id);
-	else
-		abt_iocb->u.abt.req_que_no = cpu_to_le16(vha->req->id);
+	abt_iocb->u.abt.req_que_no = cpu_to_le16(cmd_sp->qpair->req->id);
 
 	sp->done = qla24xx_abort_sp_done;
 
 	ql_dbg(ql_dbg_async, vha, 0x507c,
-	    "Abort command issued - hdl=%x, target_id=%x\n",
-	    cmd_sp->handle, fcport->tgt_id);
+	    "Abort command issued - hdl=%x, type=%x\n",
+	    cmd_sp->handle, cmd_sp->type);
 
 	rval = qla2x00_start_sp(sp);
 	if (rval != QLA_SUCCESS)
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 119927220299e..c699bbb8485bb 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -3297,19 +3297,21 @@ qla24xx_abort_iocb(srb_t *sp, struct abort_entry_24xx *abt_iocb)
 {
 	struct srb_iocb *aio = &sp->u.iocb_cmd;
 	scsi_qla_host_t *vha = sp->vha;
-	struct req_que *req = vha->req;
+	struct req_que *req = sp->qpair->req;
 
 	memset(abt_iocb, 0, sizeof(struct abort_entry_24xx));
 	abt_iocb->entry_type = ABORT_IOCB_TYPE;
 	abt_iocb->entry_count = 1;
 	abt_iocb->handle = cpu_to_le32(MAKE_HANDLE(req->id, sp->handle));
-	abt_iocb->nport_handle = cpu_to_le16(sp->fcport->loop_id);
+	if (sp->fcport) {
+		abt_iocb->nport_handle = cpu_to_le16(sp->fcport->loop_id);
+		abt_iocb->port_id[0] = sp->fcport->d_id.b.al_pa;
+		abt_iocb->port_id[1] = sp->fcport->d_id.b.area;
+		abt_iocb->port_id[2] = sp->fcport->d_id.b.domain;
+	}
 	abt_iocb->handle_to_abort =
 	    cpu_to_le32(MAKE_HANDLE(aio->u.abt.req_que_no,
 				    aio->u.abt.cmd_hndl));
-	abt_iocb->port_id[0] = sp->fcport->d_id.b.al_pa;
-	abt_iocb->port_id[1] = sp->fcport->d_id.b.area;
-	abt_iocb->port_id[2] = sp->fcport->d_id.b.domain;
 	abt_iocb->vp_index = vha->vp_idx;
 	abt_iocb->req_que_no = cpu_to_le16(aio->u.abt.req_que_no);
 	/* Send the command to the firmware */
-- 
2.20.1

[PATCH AUTOSEL 4.19 138/205] scsi: qla2xxx: Fix iIDMA error

[Sasha Levin]

From: Quinn Tran <quinn.tran@cavium.com>

[ Upstream commit 8d9bf0a9a268f7ca0b811d6e6a1fc783afa5c746 ]

When switch responds with error for Get Port Speed Command (GPSC), driver
should not proceed with telling FW about the speed of the remote port.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_gs.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index 34ff4bbc8de10..d611cf722244c 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -3277,7 +3277,7 @@ static void qla24xx_async_gpsc_sp_done(void *s, int res)
 			ql_dbg(ql_dbg_disc, vha, 0x2019,
 			    "GPSC command unsupported, disabling query.\n");
 			ha->flags.gpsc_supported = 0;
-			res = QLA_SUCCESS;
+			goto done;
 		}
 	} else {
 		switch (be16_to_cpu(ct_rsp->rsp.gpsc.speed)) {
@@ -3310,7 +3310,6 @@ static void qla24xx_async_gpsc_sp_done(void *s, int res)
 		    be16_to_cpu(ct_rsp->rsp.gpsc.speeds),
 		    be16_to_cpu(ct_rsp->rsp.gpsc.speed));
 	}
-done:
 	memset(&ea, 0, sizeof(ea));
 	ea.event = FCME_GPSC_DONE;
 	ea.rc = res;
@@ -3318,6 +3317,7 @@ done:
 	ea.sp = sp;
 	qla2x00_fcport_event_handler(vha, &ea);
 
+done:
 	sp->free(sp);
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 139/205] scsi: qla2xxx: Defer chip reset until target mode is enabled

[Sasha Levin]

From: Quinn Tran <quinn.tran@cavium.com>

[ Upstream commit 93eca6135183f7a71e36acd47655a085ed11bcdc ]

For target mode, any chip reset triggered before target mode is enabled will
be held off until user is ready to enable.  This prevents the chip from
starting or running before it is intended.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_os.c | 28 +++++++++++++++++++++-------
 1 file changed, 21 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 60b6019a2fcae..bfbdec61b3c6e 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -6051,12 +6051,27 @@ qla2x00_do_dpc(void *data)
 		if (test_and_clear_bit
 		    (ISP_ABORT_NEEDED, &base_vha->dpc_flags) &&
 		    !test_bit(UNLOADING, &base_vha->dpc_flags)) {
+			bool do_reset = true;
+
+			switch (ql2x_ini_mode) {
+			case QLA2XXX_INI_MODE_ENABLED:
+				break;
+			case QLA2XXX_INI_MODE_DISABLED:
+				if (!qla_tgt_mode_enabled(base_vha))
+					do_reset = false;
+				break;
+			case QLA2XXX_INI_MODE_DUAL:
+				if (!qla_dual_mode_enabled(base_vha))
+					do_reset = false;
+				break;
+			default:
+				break;
+			}
 
-			ql_dbg(ql_dbg_dpc, base_vha, 0x4007,
-			    "ISP abort scheduled.\n");
-			if (!(test_and_set_bit(ABORT_ISP_ACTIVE,
+			if (do_reset && !(test_and_set_bit(ABORT_ISP_ACTIVE,
 			    &base_vha->dpc_flags))) {
-
+				ql_dbg(ql_dbg_dpc, base_vha, 0x4007,
+				    "ISP abort scheduled.\n");
 				if (ha->isp_ops->abort_isp(base_vha)) {
 					/* failed. retry later */
 					set_bit(ISP_ABORT_NEEDED,
@@ -6064,10 +6079,9 @@ qla2x00_do_dpc(void *data)
 				}
 				clear_bit(ABORT_ISP_ACTIVE,
 						&base_vha->dpc_flags);
+				ql_dbg(ql_dbg_dpc, base_vha, 0x4008,
+				    "ISP abort end.\n");
 			}
-
-			ql_dbg(ql_dbg_dpc, base_vha, 0x4008,
-			    "ISP abort end.\n");
 		}
 
 		if (test_and_clear_bit(FCPORT_UPDATE_NEEDED,
-- 
2.20.1

[PATCH AUTOSEL 4.19 140/205] scsi: qla2xxx: Terminate Plogi/PRLI if WWN is 0

[Sasha Levin]

From: Quinn Tran <quinn.tran@cavium.com>

[ Upstream commit aa9e6d7b9643fc50a88c7b7aa1e34be8dc032749 ]

When driver receive PLOGI/PRLI from FW, the WWPN value will be provided.  If
it is not, then driver will terminate it.  The WWPN allows driver to locate
the session or create a new session.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_target.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index d6dc320f81a7a..078d124533247 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -4703,6 +4703,12 @@ static int qlt_handle_login(struct scsi_qla_host *vha,
 		sess = qlt_find_sess_invalidate_other(vha, wwn,
 		    port_id, loop_id, &conflict_sess);
 		spin_unlock_irqrestore(&vha->hw->tgt.sess_lock, flags);
+	} else {
+		ql_dbg(ql_dbg_disc, vha, 0xffff,
+		    "%s %d Term INOT due to WWN=0 lid=%d, NportID %06X ",
+		    __func__, __LINE__, loop_id, port_id.b24);
+		qlt_send_term_imm_notif(vha, iocb, 1);
+		goto out;
 	}
 
 	if (IS_SW_RESV_ADDR(port_id)) {
-- 
2.20.1

[PATCH AUTOSEL 4.19 141/205] scsi: qla2xxx: Fix deadlock between ATIO and HW lock

[Sasha Levin]

From: Quinn Tran <quinn.tran@cavium.com>

[ Upstream commit 1073daa470d906f1853ed4b828f16e2350a5875c ]

Move ATIO queue processing out of hardware_lock to prevent deadlock.

Fixes: 3bb67df5b5f8 ("qla2xxx: Check for online flag instead of active reset when transmitting responses")
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_init.c | 17 +++---------
 drivers/scsi/qla2xxx/qla_isr.c  | 48 +++++++++++++++------------------
 2 files changed, 26 insertions(+), 39 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index e5ecef94aebdb..733a55c09b1ca 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -4869,19 +4869,10 @@ qla2x00_configure_loop(scsi_qla_host_t *vha)
 			 */
 			if (qla_tgt_mode_enabled(vha) ||
 			    qla_dual_mode_enabled(vha)) {
-				if (IS_QLA27XX(ha) || IS_QLA83XX(ha)) {
-					spin_lock_irqsave(&ha->tgt.atio_lock,
-					    flags);
-					qlt_24xx_process_atio_queue(vha, 0);
-					spin_unlock_irqrestore(
-					    &ha->tgt.atio_lock, flags);
-				} else {
-					spin_lock_irqsave(&ha->hardware_lock,
-					    flags);
-					qlt_24xx_process_atio_queue(vha, 1);
-					spin_unlock_irqrestore(
-					    &ha->hardware_lock, flags);
-				}
+				spin_lock_irqsave(&ha->tgt.atio_lock, flags);
+				qlt_24xx_process_atio_queue(vha, 0);
+				spin_unlock_irqrestore(&ha->tgt.atio_lock,
+				    flags);
 			}
 		}
 	}
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 88d8acf86a2a4..f559beda8d5ad 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -3121,6 +3121,7 @@ qla24xx_intr_handler(int irq, void *dev_id)
 	uint16_t	mb[8];
 	struct rsp_que *rsp;
 	unsigned long	flags;
+	bool process_atio = false;
 
 	rsp = (struct rsp_que *) dev_id;
 	if (!rsp) {
@@ -3181,22 +3182,13 @@ qla24xx_intr_handler(int irq, void *dev_id)
 			qla24xx_process_response_queue(vha, rsp);
 			break;
 		case INTR_ATIO_QUE_UPDATE_27XX:
-		case INTR_ATIO_QUE_UPDATE:{
-			unsigned long flags2;
-			spin_lock_irqsave(&ha->tgt.atio_lock, flags2);
-			qlt_24xx_process_atio_queue(vha, 1);
-			spin_unlock_irqrestore(&ha->tgt.atio_lock, flags2);
+		case INTR_ATIO_QUE_UPDATE:
+			process_atio = true;
 			break;
-		}
-		case INTR_ATIO_RSP_QUE_UPDATE: {
-			unsigned long flags2;
-			spin_lock_irqsave(&ha->tgt.atio_lock, flags2);
-			qlt_24xx_process_atio_queue(vha, 1);
-			spin_unlock_irqrestore(&ha->tgt.atio_lock, flags2);
-
+		case INTR_ATIO_RSP_QUE_UPDATE:
+			process_atio = true;
 			qla24xx_process_response_queue(vha, rsp);
 			break;
-		}
 		default:
 			ql_dbg(ql_dbg_async, vha, 0x504f,
 			    "Unrecognized interrupt type (%d).\n", stat * 0xff);
@@ -3210,6 +3202,12 @@ qla24xx_intr_handler(int irq, void *dev_id)
 	qla2x00_handle_mbx_completion(ha, status);
 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 
+	if (process_atio) {
+		spin_lock_irqsave(&ha->tgt.atio_lock, flags);
+		qlt_24xx_process_atio_queue(vha, 0);
+		spin_unlock_irqrestore(&ha->tgt.atio_lock, flags);
+	}
+
 	return IRQ_HANDLED;
 }
 
@@ -3256,6 +3254,7 @@ qla24xx_msix_default(int irq, void *dev_id)
 	uint32_t	hccr;
 	uint16_t	mb[8];
 	unsigned long flags;
+	bool process_atio = false;
 
 	rsp = (struct rsp_que *) dev_id;
 	if (!rsp) {
@@ -3312,22 +3311,13 @@ qla24xx_msix_default(int irq, void *dev_id)
 			qla24xx_process_response_queue(vha, rsp);
 			break;
 		case INTR_ATIO_QUE_UPDATE_27XX:
-		case INTR_ATIO_QUE_UPDATE:{
-			unsigned long flags2;
-			spin_lock_irqsave(&ha->tgt.atio_lock, flags2);
-			qlt_24xx_process_atio_queue(vha, 1);
-			spin_unlock_irqrestore(&ha->tgt.atio_lock, flags2);
+		case INTR_ATIO_QUE_UPDATE:
+			process_atio = true;
 			break;
-		}
-		case INTR_ATIO_RSP_QUE_UPDATE: {
-			unsigned long flags2;
-			spin_lock_irqsave(&ha->tgt.atio_lock, flags2);
-			qlt_24xx_process_atio_queue(vha, 1);
-			spin_unlock_irqrestore(&ha->tgt.atio_lock, flags2);
-
+		case INTR_ATIO_RSP_QUE_UPDATE:
+			process_atio = true;
 			qla24xx_process_response_queue(vha, rsp);
 			break;
-		}
 		default:
 			ql_dbg(ql_dbg_async, vha, 0x5051,
 			    "Unrecognized interrupt type (%d).\n", stat & 0xff);
@@ -3338,6 +3328,12 @@ qla24xx_msix_default(int irq, void *dev_id)
 	qla2x00_handle_mbx_completion(ha, status);
 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 
+	if (process_atio) {
+		spin_lock_irqsave(&ha->tgt.atio_lock, flags);
+		qlt_24xx_process_atio_queue(vha, 0);
+		spin_unlock_irqrestore(&ha->tgt.atio_lock, flags);
+	}
+
 	return IRQ_HANDLED;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 142/205] scsi: qla2xxx: Increase abort timeout value

[Sasha Levin]

From: Quinn Tran <quinn.tran@cavium.com>

[ Upstream commit 8bccfe0d21b5adbba6ec4fe1776160b80d09f78a ]

Abort IOCB request can take up to 40s or 2 ABTS timeout.  We will wait for
ABTS response for 20s. On a timeout, second ABTS can go out with another 20s
timeout. On 2nd ABTS timeout FW will automatically do Logout.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_init.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 733a55c09b1ca..8f502505aa796 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1789,7 +1789,8 @@ qla24xx_async_abort_cmd(srb_t *cmd_sp, bool wait)
 
 	abt_iocb->timeout = qla24xx_abort_iocb_timeout;
 	init_completion(&abt_iocb->u.abt.comp);
-	qla2x00_init_timer(sp, qla2x00_get_async_timeout(vha));
+	/* FW can send 2 x ABTS's timeout/20s */
+	qla2x00_init_timer(sp, 42);
 
 	abt_iocb->u.abt.cmd_hndl = cmd_sp->handle;
 	abt_iocb->u.abt.req_que_no = cpu_to_le16(cmd_sp->qpair->req->id);
-- 
2.20.1

[PATCH AUTOSEL 4.19 143/205] scsi: qla2xxx: Check for Register disconnect

[Sasha Levin]

From: Sawan Chandak <sawan.chandak@cavium.com>

[ Upstream commit f99c5d294b3653e6ae563eaac5db5b4138afe31c ]

During adapter shutdown process check for register disconnect before
proceeding to call PCI functions.

Signed-off-by: Sawan Chandak <sawan.chandak@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_os.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index bfbdec61b3c6e..cb7f4d59343f0 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1744,6 +1744,7 @@ __qla2x00_abort_all_cmds(struct qla_qpair *qp, int res)
 				    !ha->flags.eeh_busy &&
 				    (!test_bit(ABORT_ISP_ACTIVE,
 					&vha->dpc_flags)) &&
+				    !qla2x00_isp_reg_stat(ha) &&
 				    (sp->type == SRB_SCSI_CMD)) {
 					/*
 					 * Don't abort commands in
-- 
2.20.1

[PATCH AUTOSEL 4.19 144/205] scsi: qla2xxx: Fix port speed display on chip reset

[Sasha Levin]

From: Quinn Tran <quinn.tran@cavium.com>

[ Upstream commit 5d74c87a20adcc77b19753c315ad9c320b2288be ]

Clear port speed value on chip reset.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_init.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 8f502505aa796..653d535e3052f 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -6502,6 +6502,7 @@ qla2x00_abort_isp_cleanup(scsi_qla_host_t *vha)
 	if (!(IS_P3P_TYPE(ha)))
 		ha->isp_ops->reset_chip(vha);
 
+	ha->link_data_rate = PORT_SPEED_UNKNOWN;
 	SAVE_TOPO(ha);
 	ha->flags.rida_fmt2 = 0;
 	ha->flags.n2n_ae = 0;
-- 
2.20.1

[PATCH AUTOSEL 4.19 145/205] scsi: qla2xxx: Fix dropped srb resource.

[Sasha Levin]

From: Quinn Tran <quinn.tran@cavium.com>

[ Upstream commit 527b8ae3948bb59c13ebaa7d657ced56ea25ab05 ]

When FW rejects a command due to "entry_status" error (malform IOCB), the srb
resource needs to be returned back for cleanup.  The filter to catch this is
in the wrong location.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_isr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index f559beda8d5ad..8fa7242dbb437 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -2837,6 +2837,7 @@ qla2x00_error_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, sts_entry_t *pkt)
 	case ELS_IOCB_TYPE:
 	case ABORT_IOCB_TYPE:
 	case MBX_IOCB_TYPE:
+	default:
 		sp = qla2x00_get_sp_from_handle(vha, func, req, pkt);
 		if (sp) {
 			sp->done(sp, res);
@@ -2847,7 +2848,6 @@ qla2x00_error_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, sts_entry_t *pkt)
 	case ABTS_RESP_24XX:
 	case CTIO_TYPE7:
 	case CTIO_CRC2:
-	default:
 		return 1;
 	}
 fatal:
-- 
2.20.1

[PATCH AUTOSEL 4.19 146/205] scsi: qla2xxx: Fix duplicate switch's Nport ID entries

[Sasha Levin]

From: Quinn Tran <quinn.tran@cavium.com>

[ Upstream commit f3a03ee1102a44ccbd2c5de80a6e862ba23e9b55 ]

Current code relies on switch to provide a unique combination of WWPN +
NPORTID to tract an FC port.  This patch tries to detect a case where switch
data base can get corrupted where multiple WWPNs can have the same Nport ID.
The 1st Nport ID on the list will be kept while the duplicate Nport ID will be
discarded.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/qla2xxx/qla_gs.c | 24 +++++++++++++++++++++++-
 1 file changed, 23 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index d611cf722244c..b8d3403c3c85a 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -3902,9 +3902,10 @@ void qla24xx_async_gnnft_done(scsi_qla_host_t *vha, srb_t *sp)
 	fc_port_t *fcport;
 	u32 i, rc;
 	bool found;
-	struct fab_scan_rp *rp;
+	struct fab_scan_rp *rp, *trp;
 	unsigned long flags;
 	u8 recheck = 0;
+	u16 dup = 0, dup_cnt = 0;
 
 	ql_dbg(ql_dbg_disc, vha, 0xffff,
 	    "%s enter\n", __func__);
@@ -3935,6 +3936,7 @@ void qla24xx_async_gnnft_done(scsi_qla_host_t *vha, srb_t *sp)
 
 	for (i = 0; i < vha->hw->max_fibre_devices; i++) {
 		u64 wwn;
+		int k;
 
 		rp = &vha->scan.l[i];
 		found = false;
@@ -3943,6 +3945,20 @@ void qla24xx_async_gnnft_done(scsi_qla_host_t *vha, srb_t *sp)
 		if (wwn == 0)
 			continue;
 
+		/* Remove duplicate NPORT ID entries from switch data base */
+		for (k = i + 1; k < vha->hw->max_fibre_devices; k++) {
+			trp = &vha->scan.l[k];
+			if (rp->id.b24 == trp->id.b24) {
+				dup = 1;
+				dup_cnt++;
+				ql_dbg(ql_dbg_disc + ql_dbg_verbose,
+				    vha, 0xffff,
+				    "Detected duplicate NPORT ID from switch data base: ID %06x WWN %8phN WWN %8phN\n",
+				    rp->id.b24, rp->port_name, trp->port_name);
+				memset(trp, 0, sizeof(*trp));
+			}
+		}
+
 		if (!memcmp(rp->port_name, vha->port_name, WWN_SIZE))
 			continue;
 
@@ -3982,6 +3998,12 @@ void qla24xx_async_gnnft_done(scsi_qla_host_t *vha, srb_t *sp)
 		}
 	}
 
+	if (dup) {
+		ql_log(ql_log_warn, vha, 0xffff,
+		    "Detected %d duplicate NPORT ID(s) from switch data base\n",
+		    dup_cnt);
+	}
+
 	/*
 	 * Logout all previous fabric dev marked lost, except FCP2 devices.
 	 */
-- 
2.20.1

[PATCH AUTOSEL 4.19 147/205] scsi: lpfc: Fix GFT_ID and PRLI logic for RSCN

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 01a8aed6a009625282b6265880f6b20cbd7a9c70 ]

Driver only sends NVME PRLI to a device that also supports FCP.  This resuls
in remote ports that don't have fc_remote_ports created for them. The driver
is clearing the nlp_fc4_type for a ndlp at the wrong time.

Fix by moving the nlp_fc4_type clearing to the discovery engine in the
DEVICE_RECOVERY state. Also ensure that rport registration is done for all
nlp_fc4_types.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_ct.c        | 5 -----
 drivers/scsi/lpfc/lpfc_hbadisc.c   | 2 +-
 drivers/scsi/lpfc/lpfc_nportdisc.c | 3 +++
 3 files changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index d909d90035bb2..384f5cd7c3c81 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -471,11 +471,6 @@ lpfc_prep_node_fc4type(struct lpfc_vport *vport, uint32_t Did, uint8_t fc4_type)
 				"Parse GID_FTrsp: did:x%x flg:x%x x%x",
 				Did, ndlp->nlp_flag, vport->fc_flag);
 
-			/* Don't assume the rport is always the previous
-			 * FC4 type.
-			 */
-			ndlp->nlp_fc4_type &= ~(NLP_FC4_FCP | NLP_FC4_NVME);
-
 			/* By default, the driver expects to support FCP FC4 */
 			if (fc4_type == FC_TYPE_FCP)
 				ndlp->nlp_fc4_type |= NLP_FC4_FCP;
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index ccdd82b1123f7..db183d1f34ab2 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -4198,7 +4198,7 @@ lpfc_nlp_state_cleanup(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 
 	if (new_state ==  NLP_STE_MAPPED_NODE ||
 	    new_state == NLP_STE_UNMAPPED_NODE) {
-		if (ndlp->nlp_fc4_type & NLP_FC4_FCP ||
+		if (ndlp->nlp_fc4_type ||
 		    ndlp->nlp_DID == Fabric_DID ||
 		    ndlp->nlp_DID == NameServer_DID ||
 		    ndlp->nlp_DID == FDMI_DID) {
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index a6619fd8238c1..394ffbe9cb6d7 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -2323,6 +2323,7 @@ lpfc_device_recov_unmap_node(struct lpfc_vport *vport,
 	lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE);
 	spin_lock_irq(shost->host_lock);
 	ndlp->nlp_flag &= ~(NLP_NODEV_REMOVE | NLP_NPR_2B_DISC);
+	ndlp->nlp_fc4_type &= ~(NLP_FC4_FCP | NLP_FC4_NVME);
 	spin_unlock_irq(shost->host_lock);
 	lpfc_disc_set_adisc(vport, ndlp);
 
@@ -2400,6 +2401,7 @@ lpfc_device_recov_mapped_node(struct lpfc_vport *vport,
 	lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE);
 	spin_lock_irq(shost->host_lock);
 	ndlp->nlp_flag &= ~(NLP_NODEV_REMOVE | NLP_NPR_2B_DISC);
+	ndlp->nlp_fc4_type &= ~(NLP_FC4_FCP | NLP_FC4_NVME);
 	spin_unlock_irq(shost->host_lock);
 	lpfc_disc_set_adisc(vport, ndlp);
 	return ndlp->nlp_state;
@@ -2657,6 +2659,7 @@ lpfc_device_recov_npr_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	lpfc_cancel_retry_delay_tmo(vport, ndlp);
 	spin_lock_irq(shost->host_lock);
 	ndlp->nlp_flag &= ~(NLP_NODEV_REMOVE | NLP_NPR_2B_DISC);
+	ndlp->nlp_fc4_type &= ~(NLP_FC4_FCP | NLP_FC4_NVME);
 	spin_unlock_irq(shost->host_lock);
 	return ndlp->nlp_state;
 }
-- 
2.20.1

[PATCH AUTOSEL 4.19 148/205] scsi: lpfc: Correct invalid EQ doorbell write on if_type=6

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit aad59d5d34738d6fd8c359df8048a84cd443e504 ]

During attachment, the driver writes the EQ doorbell to disable potential
interrupts from an EQ. The current EQ doorbell format used for clearing the
interrupt is incorrect and uses an if_type=2 format, making the operation act
on the wrong EQ.

Correct the code to use the proper if_type=6 EQ doorbell format.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_sli.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index a490e63c94b67..e704297618e06 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -392,11 +392,7 @@ lpfc_sli4_if6_eq_clr_intr(struct lpfc_queue *q)
 	struct lpfc_register doorbell;
 
 	doorbell.word0 = 0;
-	bf_set(lpfc_eqcq_doorbell_eqci, &doorbell, 1);
-	bf_set(lpfc_eqcq_doorbell_qt, &doorbell, LPFC_QUEUE_TYPE_EVENT);
-	bf_set(lpfc_eqcq_doorbell_eqid_hi, &doorbell,
-		(q->queue_id >> LPFC_EQID_HI_FIELD_SHIFT));
-	bf_set(lpfc_eqcq_doorbell_eqid_lo, &doorbell, q->queue_id);
+	bf_set(lpfc_if6_eq_doorbell_eqid, &doorbell, q->queue_id);
 	writel(doorbell.word0, q->phba->sli4_hba.EQDBregaddr);
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 149/205] scsi: lpfc: Fix errors in log messages.

[Sasha Levin]

From: James Smart <jsmart2021@gmail.com>

[ Upstream commit 2879265f514b1f4154288243c91438ddbedb3ed4 ]

Message 6408 is displayed for each entry in an array, but the cpu and queue
numbers were incorrect for the entry.  Message 6001 includes an extraneous
character.

Resolve both issues

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/lpfc/lpfc_nvme.c  | 2 +-
 drivers/scsi/lpfc/lpfc_nvmet.c | 7 +++----
 2 files changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_nvme.c b/drivers/scsi/lpfc/lpfc_nvme.c
index 645ffb5332b4a..8ee585e453dcf 100644
--- a/drivers/scsi/lpfc/lpfc_nvme.c
+++ b/drivers/scsi/lpfc/lpfc_nvme.c
@@ -282,7 +282,7 @@ lpfc_nvme_delete_queue(struct nvme_fc_local_port *pnvme_lport,
 	vport = lport->vport;
 
 	lpfc_printf_vlog(vport, KERN_INFO, LOG_NVME,
-			"6001 ENTER.  lpfc_pnvme %p, qidx x%xi qhandle %p\n",
+			"6001 ENTER.  lpfc_pnvme %p, qidx x%x qhandle %p\n",
 			lport, qidx, handle);
 	kfree(handle);
 }
diff --git a/drivers/scsi/lpfc/lpfc_nvmet.c b/drivers/scsi/lpfc/lpfc_nvmet.c
index e2575c8ec93e8..4ca38bc5694c6 100644
--- a/drivers/scsi/lpfc/lpfc_nvmet.c
+++ b/drivers/scsi/lpfc/lpfc_nvmet.c
@@ -1340,15 +1340,14 @@ lpfc_nvmet_setup_io_context(struct lpfc_hba *phba)
 			idx = 0;
 	}
 
-	infop = phba->sli4_hba.nvmet_ctx_info;
-	for (j = 0; j < phba->cfg_nvmet_mrq; j++) {
-		for (i = 0; i < phba->sli4_hba.num_present_cpu; i++) {
+	for (i = 0; i < phba->sli4_hba.num_present_cpu; i++) {
+		for (j = 0; j < phba->cfg_nvmet_mrq; j++) {
+			infop = lpfc_get_ctx_list(phba, i, j);
 			lpfc_printf_log(phba, KERN_INFO, LOG_NVME | LOG_INIT,
 					"6408 TOTAL NVMET ctx for CPU %d "
 					"MRQ %d: cnt %d nextcpu %p\n",
 					i, j, infop->nvmet_ctx_list_cnt,
 					infop->nvmet_ctx_next_cpu);
-			infop++;
 		}
 	}
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 4.19 150/205] scsi: sym53c8xx: fix NULL pointer dereference panic in sym_int_sir()

[Sasha Levin]

From: George Kennedy <george.kennedy@oracle.com>

[ Upstream commit 288315e95264b6355e26609e9dec5dc4563d4ab0 ]

sym_int_sir() in sym_hipd.c does not check the command pointer for NULL before
using it in debug message prints.

Suggested-by: Matthew Wilcox <matthew.wilcox@oracle.com>
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Reviewed-by: Mark Kanda <mark.kanda@oracle.com>
Acked-by: Matthew Wilcox <matthew.wilcox@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/sym53c8xx_2/sym_hipd.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c
index bd3f6e2d68344..0a2a54517b151 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.c
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c
@@ -4370,6 +4370,13 @@ static void sym_nego_rejected(struct sym_hcb *np, struct sym_tcb *tp, struct sym
 	OUTB(np, HS_PRT, HS_BUSY);
 }
 
+#define sym_printk(lvl, tp, cp, fmt, v...) do { \
+	if (cp)							\
+		scmd_printk(lvl, cp->cmd, fmt, ##v);		\
+	else							\
+		starget_printk(lvl, tp->starget, fmt, ##v);	\
+} while (0)
+
 /*
  *  chip exception handler for programmed interrupts.
  */
@@ -4415,7 +4422,7 @@ static void sym_int_sir(struct sym_hcb *np)
 	 *  been selected with ATN.  We do not want to handle that.
 	 */
 	case SIR_SEL_ATN_NO_MSG_OUT:
-		scmd_printk(KERN_WARNING, cp->cmd,
+		sym_printk(KERN_WARNING, tp, cp,
 				"No MSG OUT phase after selection with ATN\n");
 		goto out_stuck;
 	/*
@@ -4423,7 +4430,7 @@ static void sym_int_sir(struct sym_hcb *np)
 	 *  having reselected the initiator.
 	 */
 	case SIR_RESEL_NO_MSG_IN:
-		scmd_printk(KERN_WARNING, cp->cmd,
+		sym_printk(KERN_WARNING, tp, cp,
 				"No MSG IN phase after reselection\n");
 		goto out_stuck;
 	/*
@@ -4431,7 +4438,7 @@ static void sym_int_sir(struct sym_hcb *np)
 	 *  an IDENTIFY.
 	 */
 	case SIR_RESEL_NO_IDENTIFY:
-		scmd_printk(KERN_WARNING, cp->cmd,
+		sym_printk(KERN_WARNING, tp, cp,
 				"No IDENTIFY after reselection\n");
 		goto out_stuck;
 	/*
@@ -4460,7 +4467,7 @@ static void sym_int_sir(struct sym_hcb *np)
 	case SIR_RESEL_ABORTED:
 		np->lastmsg = np->msgout[0];
 		np->msgout[0] = M_NOOP;
-		scmd_printk(KERN_WARNING, cp->cmd,
+		sym_printk(KERN_WARNING, tp, cp,
 			"message %x sent on bad reselection\n", np->lastmsg);
 		goto out;
 	/*
-- 
2.20.1

[PATCH AUTOSEL 4.19 151/205] ARM: imx6: register pm_power_off handler if "fsl,pmic-stby-poweroff" is set

[Sasha Levin]

From: Oleksij Rempel <o.rempel@pengutronix.de>

[ Upstream commit 8148d2136002da2e2887caf6a07bbd9c033f14f3 ]

One of the Freescale recommended sequences for power off with external
PMIC is the following:
...
3.  SoC is programming PMIC for power off when standby is asserted.
4.  In CCM STOP mode, Standby is asserted, PMIC gates SoC supplies.

See:
http://www.nxp.com/assets/documents/data/en/reference-manuals/IMX6DQRM.pdf
page 5083

This patch implements step 4. of this sequence.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/mach-imx/pm-imx6.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c
index b08e407d8d96f..529f4b5bbd3a7 100644
--- a/arch/arm/mach-imx/pm-imx6.c
+++ b/arch/arm/mach-imx/pm-imx6.c
@@ -618,6 +618,28 @@ static void __init imx6_pm_common_init(const struct imx6_pm_socdata
 				   IMX6Q_GPR1_GINT);
 }
 
+static void imx6_pm_stby_poweroff(void)
+{
+	imx6_set_lpm(STOP_POWER_OFF);
+	imx6q_suspend_finish(0);
+
+	mdelay(1000);
+
+	pr_emerg("Unable to poweroff system\n");
+}
+
+static int imx6_pm_stby_poweroff_probe(void)
+{
+	if (pm_power_off) {
+		pr_warn("%s: pm_power_off already claimed  %p %pf!\n",
+			__func__, pm_power_off, pm_power_off);
+		return -EBUSY;
+	}
+
+	pm_power_off = imx6_pm_stby_poweroff;
+	return 0;
+}
+
 void __init imx6_pm_ccm_init(const char *ccm_compat)
 {
 	struct device_node *np;
@@ -634,6 +656,9 @@ void __init imx6_pm_ccm_init(const char *ccm_compat)
 	val = readl_relaxed(ccm_base + CLPCR);
 	val &= ~BM_CLPCR_LPM;
 	writel_relaxed(val, ccm_base + CLPCR);
+
+	if (of_property_read_bool(np, "fsl,pmic-stby-poweroff"))
+		imx6_pm_stby_poweroff_probe();
 }
 
 void __init imx6q_pm_init(void)
-- 
2.20.1

[PATCH AUTOSEL 4.19 152/205] scsi: pm80xx: Corrected dma_unmap_sg() parameter

[Sasha Levin]

From: Deepak Ukey <deepak.ukey@microchip.com>

[ Upstream commit 76cb25b058034d37244be6aca97a2ad52a5fbcad ]

For the function dma_unmap_sg(), the <nents> parameter should be number of
elements in the scatter list prior to the mapping, not after the mapping.

Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Acked-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/pm8001/pm8001_sas.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index 947d6017d004c..576a0f091933b 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -466,7 +466,7 @@ err_out:
 	dev_printk(KERN_ERR, pm8001_ha->dev, "pm8001 exec failed[%d]!\n", rc);
 	if (!sas_protocol_ata(t->task_proto))
 		if (n_elem)
-			dma_unmap_sg(pm8001_ha->dev, t->scatter, n_elem,
+			dma_unmap_sg(pm8001_ha->dev, t->scatter, t->num_scatter,
 				t->data_dir);
 out_done:
 	spin_unlock_irqrestore(&pm8001_ha->lock, flags);
-- 
2.20.1

[PATCH AUTOSEL 4.19 153/205] scsi: pm80xx: Fixed system hang issue during kexec boot

[Sasha Levin]

From: Deepak Ukey <deepak.ukey@microchip.com>

[ Upstream commit 72349b62a571effd6faadd0600b8e657dd87afbf ]

When the firmware is not responding, execution of kexec boot causes a system
hang. When firmware assertion happened, driver get notified with interrupt
vector updated in MPI configuration table. Then, the driver will read
scratchpad register and set controller_fatal_error flag to true.

Signed-off-by: Deepak Ukey <deepak.ukey@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Acked-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/pm8001/pm8001_hwi.c |  6 +++
 drivers/scsi/pm8001/pm8001_sas.c |  7 +++
 drivers/scsi/pm8001/pm8001_sas.h |  1 +
 drivers/scsi/pm8001/pm80xx_hwi.c | 80 +++++++++++++++++++++++++++++---
 drivers/scsi/pm8001/pm80xx_hwi.h |  3 ++
 5 files changed, 91 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 4dd6cad330e8e..3e814c0469fbd 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -1479,6 +1479,12 @@ u32 pm8001_mpi_msg_consume(struct pm8001_hba_info *pm8001_ha,
 		} else {
 			u32 producer_index;
 			void *pi_virt = circularQ->pi_virt;
+			/* spurious interrupt during setup if
+			 * kexec-ing and driver doing a doorbell access
+			 * with the pre-kexec oq interrupt setup
+			 */
+			if (!pi_virt)
+				break;
 			/* Update the producer index from SPC */
 			producer_index = pm8001_read_32(pi_virt);
 			circularQ->producer_index = cpu_to_le32(producer_index);
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index 576a0f091933b..59feda261e088 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -374,6 +374,13 @@ static int pm8001_task_exec(struct sas_task *task,
 		return 0;
 	}
 	pm8001_ha = pm8001_find_ha_by_dev(task->dev);
+	if (pm8001_ha->controller_fatal_error) {
+		struct task_status_struct *ts = &t->task_status;
+
+		ts->resp = SAS_TASK_UNDELIVERED;
+		t->task_done(t);
+		return 0;
+	}
 	PM8001_IO_DBG(pm8001_ha, pm8001_printk("pm8001_task_exec device \n "));
 	spin_lock_irqsave(&pm8001_ha->lock, flags);
 	do {
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index 80b4dd6df0c25..1816e351071fa 100644
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -538,6 +538,7 @@ struct pm8001_hba_info {
 	u32			logging_level;
 	u32			fw_status;
 	u32			smp_exp_mode;
+	bool			controller_fatal_error;
 	const struct firmware 	*fw_image;
 	struct isr_param irq_vector[PM8001_MAX_MSIX_VEC];
 	u32			reset_in_progress;
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 42f0405601ad1..5021aed87f33a 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -577,6 +577,9 @@ static void update_main_config_table(struct pm8001_hba_info *pm8001_ha)
 		pm8001_ha->main_cfg_tbl.pm80xx_tbl.pcs_event_log_size);
 	pm8001_mw32(address, MAIN_PCS_EVENT_LOG_OPTION,
 		pm8001_ha->main_cfg_tbl.pm80xx_tbl.pcs_event_log_severity);
+	/* Update Fatal error interrupt vector */
+	pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_interrupt |=
+					((pm8001_ha->number_of_intr - 1) << 8);
 	pm8001_mw32(address, MAIN_FATAL_ERROR_INTERRUPT,
 		pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_interrupt);
 	pm8001_mw32(address, MAIN_EVENT_CRC_CHECK,
@@ -1110,6 +1113,9 @@ static int pm80xx_chip_init(struct pm8001_hba_info *pm8001_ha)
 		return -EBUSY;
 	}
 
+	/* Initialize the controller fatal error flag */
+	pm8001_ha->controller_fatal_error = false;
+
 	/* Initialize pci space address eg: mpi offset */
 	init_pci_device_addresses(pm8001_ha);
 	init_default_table_values(pm8001_ha);
@@ -1218,13 +1224,17 @@ pm80xx_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
 	u32 bootloader_state;
 	u32 ibutton0, ibutton1;
 
-	/* Check if MPI is in ready state to reset */
-	if (mpi_uninit_check(pm8001_ha) != 0) {
-		PM8001_FAIL_DBG(pm8001_ha,
-			pm8001_printk("MPI state is not ready\n"));
-		return -1;
+	/* Process MPI table uninitialization only if FW is ready */
+	if (!pm8001_ha->controller_fatal_error) {
+		/* Check if MPI is in ready state to reset */
+		if (mpi_uninit_check(pm8001_ha) != 0) {
+			regval = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+			PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
+				"MPI state is not ready scratch1 :0x%x\n",
+				regval));
+			return -1;
+		}
 	}
-
 	/* checked for reset register normal state; 0x0 */
 	regval = pm8001_cr32(pm8001_ha, 0, SPC_REG_SOFT_RESET);
 	PM8001_INIT_DBG(pm8001_ha,
@@ -3752,6 +3762,46 @@ static void process_one_iomb(struct pm8001_hba_info *pm8001_ha, void *piomb)
 	}
 }
 
+static void print_scratchpad_registers(struct pm8001_hba_info *pm8001_ha)
+{
+	PM8001_FAIL_DBG(pm8001_ha,
+		pm8001_printk("MSGU_SCRATCH_PAD_0: 0x%x\n",
+			pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0)));
+	PM8001_FAIL_DBG(pm8001_ha,
+		pm8001_printk("MSGU_SCRATCH_PAD_1:0x%x\n",
+			pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1)));
+	PM8001_FAIL_DBG(pm8001_ha,
+		pm8001_printk("MSGU_SCRATCH_PAD_2: 0x%x\n",
+			pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2)));
+	PM8001_FAIL_DBG(pm8001_ha,
+		pm8001_printk("MSGU_SCRATCH_PAD_3: 0x%x\n",
+			pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3)));
+	PM8001_FAIL_DBG(pm8001_ha,
+		pm8001_printk("MSGU_HOST_SCRATCH_PAD_0: 0x%x\n",
+			pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_0)));
+	PM8001_FAIL_DBG(pm8001_ha,
+		pm8001_printk("MSGU_HOST_SCRATCH_PAD_1: 0x%x\n",
+			pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_1)));
+	PM8001_FAIL_DBG(pm8001_ha,
+		pm8001_printk("MSGU_HOST_SCRATCH_PAD_2: 0x%x\n",
+			pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_2)));
+	PM8001_FAIL_DBG(pm8001_ha,
+		pm8001_printk("MSGU_HOST_SCRATCH_PAD_3: 0x%x\n",
+			pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_3)));
+	PM8001_FAIL_DBG(pm8001_ha,
+		pm8001_printk("MSGU_HOST_SCRATCH_PAD_4: 0x%x\n",
+			pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_4)));
+	PM8001_FAIL_DBG(pm8001_ha,
+		pm8001_printk("MSGU_HOST_SCRATCH_PAD_5: 0x%x\n",
+			pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_5)));
+	PM8001_FAIL_DBG(pm8001_ha,
+		pm8001_printk("MSGU_RSVD_SCRATCH_PAD_0: 0x%x\n",
+			pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_6)));
+	PM8001_FAIL_DBG(pm8001_ha,
+		pm8001_printk("MSGU_RSVD_SCRATCH_PAD_1: 0x%x\n",
+			pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_7)));
+}
+
 static int process_oq(struct pm8001_hba_info *pm8001_ha, u8 vec)
 {
 	struct outbound_queue_table *circularQ;
@@ -3759,10 +3809,28 @@ static int process_oq(struct pm8001_hba_info *pm8001_ha, u8 vec)
 	u8 uninitialized_var(bc);
 	u32 ret = MPI_IO_STATUS_FAIL;
 	unsigned long flags;
+	u32 regval;
 
+	if (vec == (pm8001_ha->number_of_intr - 1)) {
+		regval = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+		if ((regval & SCRATCH_PAD_MIPSALL_READY) !=
+					SCRATCH_PAD_MIPSALL_READY) {
+			pm8001_ha->controller_fatal_error = true;
+			PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
+				"Firmware Fatal error! Regval:0x%x\n", regval));
+			print_scratchpad_registers(pm8001_ha);
+			return ret;
+		}
+	}
 	spin_lock_irqsave(&pm8001_ha->lock, flags);
 	circularQ = &pm8001_ha->outbnd_q_tbl[vec];
 	do {
+		/* spurious interrupt during setup if kexec-ing and
+		 * driver doing a doorbell access w/ the pre-kexec oq
+		 * interrupt setup.
+		 */
+		if (!circularQ->pi_virt)
+			break;
 		ret = pm8001_mpi_msg_consume(pm8001_ha, circularQ, &pMsg1, &bc);
 		if (MPI_IO_STATUS_SUCCESS == ret) {
 			/* process the outbound message */
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.h b/drivers/scsi/pm8001/pm80xx_hwi.h
index 889e69ce3689b..7dd2699d0efb5 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.h
+++ b/drivers/scsi/pm8001/pm80xx_hwi.h
@@ -1384,6 +1384,9 @@ typedef struct SASProtocolTimerConfig SASProtocolTimerConfig_t;
 #define SCRATCH_PAD_BOOT_LOAD_SUCCESS	0x0
 #define SCRATCH_PAD_IOP0_READY		0xC00
 #define SCRATCH_PAD_IOP1_READY		0x3000
+#define SCRATCH_PAD_MIPSALL_READY	(SCRATCH_PAD_IOP1_READY | \
+					SCRATCH_PAD_IOP0_READY | \
+					SCRATCH_PAD_RAAE_READY)
 
 /* boot loader state */
 #define SCRATCH_PAD1_BOOTSTATE_MASK		0x70	/* Bit 4-6 */
-- 
2.20.1

[PATCH AUTOSEL 4.19 154/205] kprobes: Don't call BUG_ON() if there is a kprobe in use on free list

[Sasha Levin]

From: Masami Hiramatsu <mhiramat@kernel.org>

[ Upstream commit cbdd96f5586151e48317d90a403941ec23f12660 ]

Instead of calling BUG_ON(), if we find a kprobe in use on free kprobe
list, just remove it from the list and keep it on kprobe hash list
as same as other in-use kprobes.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Naveen N . Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/153666126882.21306.10738207224288507996.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/kprobes.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index b8efca9dc2cbb..aed90788db5c1 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -544,8 +544,14 @@ static void do_free_cleaned_kprobes(void)
 	struct optimized_kprobe *op, *tmp;
 
 	list_for_each_entry_safe(op, tmp, &freeing_list, list) {
-		BUG_ON(!kprobe_unused(&op->kp));
 		list_del_init(&op->list);
+		if (WARN_ON_ONCE(!kprobe_unused(&op->kp))) {
+			/*
+			 * This must not happen, but if there is a kprobe
+			 * still in use, keep it on kprobes hash list.
+			 */
+			continue;
+		}
 		free_aggr_kprobe(&op->kp);
 	}
 }
-- 
2.20.1

[PATCH AUTOSEL 4.19 155/205] net: aquantia: fix hw_atl_utils_fw_upload_dwords

[Sasha Levin]

From: Yana Esina <yana.esina@aquantia.com>

[ Upstream commit 3ee5c8873fd369e2005dc93bf6d4b299b4976e68 ]

This patch fixes the upload function, which worked incorrectly with
some chips.

Signed-off-by: Yana Esina <yana.esina@aquantia.com>
Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com>
Tested-by: Nikita Danilov <nikita.danilov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../aquantia/atlantic/hw_atl/hw_atl_llh.c     |  8 +++++
 .../aquantia/atlantic/hw_atl/hw_atl_llh.h     |  3 ++
 .../atlantic/hw_atl/hw_atl_llh_internal.h     | 13 +++++++
 .../aquantia/atlantic/hw_atl/hw_atl_utils.c   | 36 +++++++++++++------
 .../aquantia/atlantic/hw_atl/hw_atl_utils.h   |  5 +++
 .../atlantic/hw_atl/hw_atl_utils_fw2x.c       |  5 +++
 6 files changed, 59 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.c
index 10ec5dc88e243..5502ec5f0f699 100644
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.c
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.c
@@ -1468,3 +1468,11 @@ void hw_atl_reg_glb_cpu_scratch_scp_set(struct aq_hw_s *aq_hw,
 	aq_hw_write_reg(aq_hw, HW_ATL_GLB_CPU_SCRATCH_SCP_ADR(scratch_scp),
 			glb_cpu_scratch_scp);
 }
+
+void hw_atl_mcp_up_force_intr_set(struct aq_hw_s *aq_hw, u32 up_force_intr)
+{
+	aq_hw_write_reg_bit(aq_hw, HW_ATL_MCP_UP_FORCE_INTERRUPT_ADR,
+			    HW_ATL_MCP_UP_FORCE_INTERRUPT_MSK,
+			    HW_ATL_MCP_UP_FORCE_INTERRUPT_SHIFT,
+			    up_force_intr);
+}
diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.h b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.h
index b3bf64b48b93d..41f239928c157 100644
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.h
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh.h
@@ -701,4 +701,7 @@ void hw_atl_msm_reg_wr_strobe_set(struct aq_hw_s *aq_hw, u32 reg_wr_strobe);
 /* set pci register reset disable */
 void hw_atl_pci_pci_reg_res_dis_set(struct aq_hw_s *aq_hw, u32 pci_reg_res_dis);
 
+/* set uP Force Interrupt */
+void hw_atl_mcp_up_force_intr_set(struct aq_hw_s *aq_hw, u32 up_force_intr);
+
 #endif /* HW_ATL_LLH_H */
diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h
index e2ecdb1c5a5c4..a715fa317b1c8 100644
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_llh_internal.h
@@ -2405,4 +2405,17 @@
 #define HW_ATL_GLB_CPU_SCRATCH_SCP_ADR(scratch_scp) \
 	(0x00000300u + (scratch_scp) * 0x4)
 
+/* register address for bitfield uP Force Interrupt */
+#define HW_ATL_MCP_UP_FORCE_INTERRUPT_ADR 0x00000404
+/* bitmask for bitfield uP Force Interrupt */
+#define HW_ATL_MCP_UP_FORCE_INTERRUPT_MSK 0x00000002
+/* inverted bitmask for bitfield uP Force Interrupt */
+#define HW_ATL_MCP_UP_FORCE_INTERRUPT_MSKN 0xFFFFFFFD
+/* lower bit position of bitfield uP Force Interrupt */
+#define HW_ATL_MCP_UP_FORCE_INTERRUPT_SHIFT 1
+/* width of bitfield uP Force Interrupt */
+#define HW_ATL_MCP_UP_FORCE_INTERRUPT_WIDTH 1
+/* default value of bitfield uP Force Interrupt */
+#define HW_ATL_MCP_UP_FORCE_INTERRUPT_DEFAULT 0x0
+
 #endif /* HW_ATL_LLH_INTERNAL_H */
diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c
index 9939ccaeb125b..096ec18e8f15a 100644
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c
@@ -327,17 +327,31 @@ static int hw_atl_utils_fw_upload_dwords(struct aq_hw_s *self, u32 a, u32 *p,
 		err = -ETIME;
 		goto err_exit;
 	}
+	if (IS_CHIP_FEATURE(REVISION_B1)) {
+		u32 offset = 0;
+
+		for (; offset < cnt; ++offset) {
+			aq_hw_write_reg(self, 0x328, p[offset]);
+			aq_hw_write_reg(self, 0x32C,
+					(0x80000000 | (0xFFFF & (offset * 4))));
+			hw_atl_mcp_up_force_intr_set(self, 1);
+			/* 1000 times by 10us = 10ms */
+			AQ_HW_WAIT_FOR((aq_hw_read_reg(self,
+						       0x32C) & 0xF0000000) !=
+				       0x80000000,
+				       10, 1000);
+		}
+	} else {
+		u32 offset = 0;
 
-	aq_hw_write_reg(self, 0x00000208U, a);
-
-	for (++cnt; --cnt;) {
-		u32 i = 0U;
+		aq_hw_write_reg(self, 0x208, a);
 
-		aq_hw_write_reg(self, 0x0000020CU, *(p++));
-		aq_hw_write_reg(self, 0x00000200U, 0xC000U);
+		for (; offset < cnt; ++offset) {
+			aq_hw_write_reg(self, 0x20C, p[offset]);
+			aq_hw_write_reg(self, 0x200, 0xC000);
 
-		for (i = 1024U;
-			(0x100U & aq_hw_read_reg(self, 0x00000200U)) && --i;) {
+			AQ_HW_WAIT_FOR((aq_hw_read_reg(self, 0x200U) &
+					0x100) == 0, 10, 1000);
 		}
 	}
 
@@ -401,7 +415,7 @@ struct aq_hw_atl_utils_fw_rpc_tid_s {
 
 #define hw_atl_utils_fw_rpc_init(_H_) hw_atl_utils_fw_rpc_wait(_H_, NULL)
 
-static int hw_atl_utils_fw_rpc_call(struct aq_hw_s *self, unsigned int rpc_size)
+int hw_atl_utils_fw_rpc_call(struct aq_hw_s *self, unsigned int rpc_size)
 {
 	int err = 0;
 	struct aq_hw_atl_utils_fw_rpc_tid_s sw;
@@ -425,8 +439,8 @@ err_exit:
 	return err;
 }
 
-static int hw_atl_utils_fw_rpc_wait(struct aq_hw_s *self,
-				    struct hw_aq_atl_utils_fw_rpc **rpc)
+int hw_atl_utils_fw_rpc_wait(struct aq_hw_s *self,
+			     struct hw_aq_atl_utils_fw_rpc **rpc)
 {
 	int err = 0;
 	struct aq_hw_atl_utils_fw_rpc_tid_s sw;
diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.h b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.h
index b875590efcbdd..505c8a2abd9ca 100644
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.h
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.h
@@ -319,6 +319,11 @@ struct aq_stats_s *hw_atl_utils_get_hw_stats(struct aq_hw_s *self);
 int hw_atl_utils_fw_downld_dwords(struct aq_hw_s *self, u32 a,
 				  u32 *p, u32 cnt);
 
+int hw_atl_utils_fw_rpc_call(struct aq_hw_s *self, unsigned int rpc_size);
+
+int hw_atl_utils_fw_rpc_wait(struct aq_hw_s *self,
+			     struct hw_aq_atl_utils_fw_rpc **rpc);
+
 extern const struct aq_fw_ops aq_fw_1x_ops;
 extern const struct aq_fw_ops aq_fw_2x_ops;
 
diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils_fw2x.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils_fw2x.c
index e37943760a58b..6300d94c9ff07 100644
--- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils_fw2x.c
+++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils_fw2x.c
@@ -21,6 +21,7 @@
 
 #define HW_ATL_FW2X_MPI_EFUSE_ADDR	0x364
 #define HW_ATL_FW2X_MPI_MBOX_ADDR	0x360
+#define HW_ATL_FW2X_MPI_RPC_ADDR        0x334
 
 #define HW_ATL_FW2X_MPI_CONTROL_ADDR	0x368
 #define HW_ATL_FW2X_MPI_CONTROL2_ADDR	0x36C
@@ -40,6 +41,10 @@ static int aq_fw2x_init(struct aq_hw_s *self)
 	AQ_HW_WAIT_FOR(0U != (self->mbox_addr =
 			aq_hw_read_reg(self, HW_ATL_FW2X_MPI_MBOX_ADDR)),
 		       1000U, 10U);
+	AQ_HW_WAIT_FOR(0U != (self->rpc_addr =
+		       aq_hw_read_reg(self, HW_ATL_FW2X_MPI_RPC_ADDR)),
+		       1000U, 100U);
+
 	return err;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 156/205] Drivers: hv: vmbus: Fix synic per-cpu context initialization

[Sasha Levin]

From: Michael Kelley <mikelley@microsoft.com>

[ Upstream commit f25a7ece08bdb1f2b3c4bbeae942682fc3a99dde ]

If hv_synic_alloc() errors out, the state of the per-cpu context
for some CPUs is unknown since the zero'ing is done as each
CPU is iterated over.  In such case, hv_synic_cleanup() may try to
free memory based on uninitialized values.  Fix this by zero'ing
the per-cpu context for all CPUs before doing any memory
allocations that might fail.

Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hv/hv.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/hv/hv.c b/drivers/hv/hv.c
index 8e923e70e5945..12bc9fa211117 100644
--- a/drivers/hv/hv.c
+++ b/drivers/hv/hv.c
@@ -189,6 +189,17 @@ static void hv_init_clockevent_device(struct clock_event_device *dev, int cpu)
 int hv_synic_alloc(void)
 {
 	int cpu;
+	struct hv_per_cpu_context *hv_cpu;
+
+	/*
+	 * First, zero all per-cpu memory areas so hv_synic_free() can
+	 * detect what memory has been allocated and cleanup properly
+	 * after any failures.
+	 */
+	for_each_present_cpu(cpu) {
+		hv_cpu = per_cpu_ptr(hv_context.cpu_context, cpu);
+		memset(hv_cpu, 0, sizeof(*hv_cpu));
+	}
 
 	hv_context.hv_numa_map = kcalloc(nr_node_ids, sizeof(struct cpumask),
 					 GFP_KERNEL);
@@ -198,10 +209,8 @@ int hv_synic_alloc(void)
 	}
 
 	for_each_present_cpu(cpu) {
-		struct hv_per_cpu_context *hv_cpu
-			= per_cpu_ptr(hv_context.cpu_context, cpu);
+		hv_cpu = per_cpu_ptr(hv_context.cpu_context, cpu);
 
-		memset(hv_cpu, 0, sizeof(*hv_cpu));
 		tasklet_init(&hv_cpu->msg_dpc,
 			     vmbus_on_msg_dpc, (unsigned long) hv_cpu);
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 157/205] nvmem: core: return error code instead of NULL from nvmem_device_get

[Sasha Levin]

From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

[ Upstream commit ca6ac25cecf0e740d7cc8e03e0ebbf8acbeca3df ]

nvmem_device_get() should return ERR_PTR() on error or valid pointer
on success, but one of the code path seems to return NULL, so fix it.

Reported-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvmem/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
index d32eba11c000f..30c040786fde2 100644
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -692,7 +692,7 @@ static struct nvmem_device *nvmem_find(const char *name)
 	d = bus_find_device_by_name(&nvmem_bus_type, NULL, name);
 
 	if (!d)
-		return NULL;
+		return ERR_PTR(-ENOENT);
 
 	return to_nvmem_device(d);
 }
-- 
2.20.1

[PATCH AUTOSEL 4.19 158/205] media: dt-bindings: adv748x: Fix decimal unit addresses

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 27582f0ea97fe3e4a38beb98ab36cce4b6f029d5 ]

With recent dtc and W=1:

    Warning (graph_port): video-receiver@70/port@10: graph node unit address error, expected "a"
    Warning (graph_port): video-receiver@70/port@11: graph node unit address error, expected "b"

Unit addresses are always hexadecimal (without prefix), while the bases
of reg property values depend on their prefixes.

Fixes: e69595170b1cad85 ("media: adv748x: Add adv7481, adv7482 bindings")

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 Documentation/devicetree/bindings/media/i2c/adv748x.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.txt b/Documentation/devicetree/bindings/media/i2c/adv748x.txt
index 21ffb5ed81830..54d1d3bc18694 100644
--- a/Documentation/devicetree/bindings/media/i2c/adv748x.txt
+++ b/Documentation/devicetree/bindings/media/i2c/adv748x.txt
@@ -73,7 +73,7 @@ Example:
 			};
 		};
 
-		port@10 {
+		port@a {
 			reg = <10>;
 
 			adv7482_txa: endpoint {
@@ -83,7 +83,7 @@ Example:
 			};
 		};
 
-		port@11 {
+		port@b {
 			reg = <11>;
 
 			adv7482_txb: endpoint {
-- 
2.20.1

[PATCH AUTOSEL 4.19 159/205] ALSA: hda: Fix implicit definition of pci_iomap() on SH

[Sasha Levin]

From: Mark Brown <broonie@kernel.org>

[ Upstream commit d9b84a15892c02334ac8a5c28865ae54168d9b22 ]

Include asm/io.h directly so we've got a definition of pci_iomap(), the
current set of includes do this implicitly on most architectures but not
on SH.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/patch_ca0132.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c
index 0436789e7cd88..7fce2366f2421 100644
--- a/sound/pci/hda/patch_ca0132.c
+++ b/sound/pci/hda/patch_ca0132.c
@@ -31,6 +31,7 @@
 #include <linux/types.h>
 #include <linux/io.h>
 #include <linux/pci.h>
+#include <asm/io.h>
 #include <sound/core.h>
 #include "hda_codec.h"
 #include "hda_local.h"
-- 
2.20.1

[PATCH AUTOSEL 4.19 160/205] media: fix: media: pci: meye: validate offset to avoid arbitrary access

[Sasha Levin]

From: Lao Wei <zrlw@qq.com>

[ Upstream commit eac7230fdb4672c2cb56f6a01a1744f562c01f80 ]

Motion eye video4linux driver for Sony Vaio PictureBook desn't validate user-controlled parameter
'vma->vm_pgoff', a malicious process might access all of kernel memory from user space by trying
pass different arbitrary address.
Discussion: http://www.openwall.com/lists/oss-security/2018/07/06/1

Signed-off-by: Lao Wei <zrlw@qq.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/pci/meye/meye.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/pci/meye/meye.c b/drivers/media/pci/meye/meye.c
index 8001d3e9134e4..db2a7ad1e5231 100644
--- a/drivers/media/pci/meye/meye.c
+++ b/drivers/media/pci/meye/meye.c
@@ -1460,7 +1460,7 @@ static int meye_mmap(struct file *file, struct vm_area_struct *vma)
 	unsigned long page, pos;
 
 	mutex_lock(&meye.lock);
-	if (size > gbuffers * gbufsize) {
+	if (size > gbuffers * gbufsize || offset > gbuffers * gbufsize - size) {
 		mutex_unlock(&meye.lock);
 		return -EINVAL;
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.19 161/205] media: dvb: fix compat ioctl translation

[Sasha Levin]

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit 1ccbeeb888ac33627d91f1ccf0b84ef3bcadef24 ]

The VIDEO_GET_EVENT and VIDEO_STILLPICTURE was added back in 2005 but
it never worked because the command number is wrong.

Using the right command number means we have a better chance of them
actually doing the right thing, though clearly nobody has ever tried
it successfully.

I noticed these while auditing the remaining users of compat_time_t
for y2038 bugs. This one is fine in that regard, it just never did
anything.

Fixes: 6e87abd0b8cb ("[DVB]: Add compat ioctl handling.")

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/compat_ioctl.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index 8f08095ee54e9..3a03f74a8cc4e 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -141,6 +141,7 @@ struct compat_video_event {
 		unsigned int frame_rate;
 	} u;
 };
+#define VIDEO_GET_EVENT32 _IOR('o', 28, struct compat_video_event)
 
 static int do_video_get_event(struct file *file,
 		unsigned int cmd, struct compat_video_event __user *up)
@@ -152,7 +153,7 @@ static int do_video_get_event(struct file *file,
 	if (kevent == NULL)
 		return -EFAULT;
 
-	err = do_ioctl(file, cmd, (unsigned long)kevent);
+	err = do_ioctl(file, VIDEO_GET_EVENT, (unsigned long)kevent);
 	if (!err) {
 		err  = convert_in_user(&kevent->type, &up->type);
 		err |= convert_in_user(&kevent->timestamp, &up->timestamp);
@@ -171,6 +172,7 @@ struct compat_video_still_picture {
         compat_uptr_t iFrame;
         int32_t size;
 };
+#define VIDEO_STILLPICTURE32 _IOW('o', 30, struct compat_video_still_picture)
 
 static int do_video_stillpicture(struct file *file,
 		unsigned int cmd, struct compat_video_still_picture __user *up)
@@ -193,7 +195,7 @@ static int do_video_stillpicture(struct file *file,
 	if (err)
 		return -EFAULT;
 
-	err = do_ioctl(file, cmd, (unsigned long) up_native);
+	err = do_ioctl(file, VIDEO_STILLPICTURE, (unsigned long) up_native);
 
 	return err;
 }
@@ -1302,9 +1304,9 @@ static long do_ioctl_trans(unsigned int cmd,
 		return rtc_ioctl(file, cmd, argp);
 
 	/* dvb */
-	case VIDEO_GET_EVENT:
+	case VIDEO_GET_EVENT32:
 		return do_video_get_event(file, cmd, argp);
-	case VIDEO_STILLPICTURE:
+	case VIDEO_STILLPICTURE32:
 		return do_video_stillpicture(file, cmd, argp);
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 162/205] net: bcmgenet: Fix speed selection for reverse MII

[Sasha Levin]

From: Andrew Lunn <andrew@lunn.ch>

[ Upstream commit 00eb2243b933a496958f4ce1bcf59840fea8be16 ]

The phy supported speed is being used to determine if the MAC should
be configured to 100 or 1G. The masking logic is broken. Instead, look
at 1G supported speeds to enable 1G MAC support.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/broadcom/genet/bcmmii.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c
index 0d527fa5de610..b0592fd4135b3 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -226,11 +226,10 @@ int bcmgenet_mii_config(struct net_device *dev, bool init)
 		 * capabilities, use that knowledge to also configure the
 		 * Reverse MII interface correctly.
 		 */
-		if ((dev->phydev->supported & PHY_BASIC_FEATURES) ==
-				PHY_BASIC_FEATURES)
-			port_ctrl = PORT_MODE_EXT_RVMII_25;
-		else
+		if (dev->phydev->supported & PHY_1000BT_FEATURES)
 			port_ctrl = PORT_MODE_EXT_RVMII_50;
+		else
+			port_ctrl = PORT_MODE_EXT_RVMII_25;
 		bcmgenet_sys_writel(priv, port_ctrl, SYS_PORT_CTRL);
 		break;
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 163/205] arm64: dts: meson: libretech: update board model

[Sasha Levin]

From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit b7eb0e26cc4a212fde09144cd49d4103170d2b9e ]

There is actually several different libretech board with the CC suffix
so the model name is not appropriate here. Update to something more
specific

Reported-by: Da Xue <da@lessconfused.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
index f63bceb88caaf..90a56af967a7f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -13,7 +13,7 @@
 
 / {
 	compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl";
-	model = "Libre Technology CC";
+	model = "Libre Computer Board AML-S905X-CC";
 
 	aliases {
 		serial0 = &uart_AO;
-- 
2.20.1

[PATCH AUTOSEL 4.19 163/205] arm64: dts: meson: libretech: update board model

[Sasha Levin]

From: Jerome Brunet <jbrunet@baylibre.com>

[ Upstream commit b7eb0e26cc4a212fde09144cd49d4103170d2b9e ]

There is actually several different libretech board with the CC suffix
so the model name is not appropriate here. Update to something more
specific

Reported-by: Da Xue <da@lessconfused.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
index f63bceb88caaf..90a56af967a7f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -13,7 +13,7 @@
 
 / {
 	compatible = "libretech,cc", "amlogic,s905x", "amlogic,meson-gxl";
-	model = "Libre Technology CC";
+	model = "Libre Computer Board AML-S905X-CC";
 
 	aliases {
 		serial0 = &uart_AO;
-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH AUTOSEL 4.19 164/205] arm64: dts: meson-axg: use the proper compatible for ethmac

[Sasha Levin]

From: Neil Armstrong <narmstrong@baylibre.com>

[ Upstream commit eaf8f57c0bf5451132932616ab62f9481adefb55 ]

Use the correct compatible for the AXG ethernet mac node.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index c518130e5ce73..3c34f14fa5086 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -458,7 +458,7 @@
 		};
 
 		ethmac: ethernet@ff3f0000 {
-			compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
+			compatible = "amlogic,meson-axg-dwmac", "snps,dwmac";
 			reg = <0x0 0xff3f0000 0x0 0x10000
 				0x0 0xff634540 0x0 0x8>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 164/205] arm64: dts: meson-axg: use the proper compatible for ethmac

[Sasha Levin]

From: Neil Armstrong <narmstrong@baylibre.com>

[ Upstream commit eaf8f57c0bf5451132932616ab62f9481adefb55 ]

Use the correct compatible for the AXG ethernet mac node.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index c518130e5ce73..3c34f14fa5086 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -458,7 +458,7 @@
 		};
 
 		ethmac: ethernet@ff3f0000 {
-			compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
+			compatible = "amlogic,meson-axg-dwmac", "snps,dwmac";
 			reg = <0x0 0xff3f0000 0x0 0x10000
 				0x0 0xff634540 0x0 0x8>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>;
-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH AUTOSEL 4.19 165/205] ALSA: intel8x0m: Register irq handler after register initializations

[Sasha Levin]

From: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 7064f376d4a10686f51c879401a569bb4babf9c6 ]

The interrupt handler has to be acquired after the other resource
initialization when allocated with IRQF_SHARED.  Otherwise it's
triggered before the resource gets ready, and may lead to unpleasant
behavior.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/intel8x0m.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/sound/pci/intel8x0m.c b/sound/pci/intel8x0m.c
index 943a726b1c1b0..c84629190cbaf 100644
--- a/sound/pci/intel8x0m.c
+++ b/sound/pci/intel8x0m.c
@@ -1171,16 +1171,6 @@ static int snd_intel8x0m_create(struct snd_card *card,
 	}
 
  port_inited:
-	if (request_irq(pci->irq, snd_intel8x0m_interrupt, IRQF_SHARED,
-			KBUILD_MODNAME, chip)) {
-		dev_err(card->dev, "unable to grab IRQ %d\n", pci->irq);
-		snd_intel8x0m_free(chip);
-		return -EBUSY;
-	}
-	chip->irq = pci->irq;
-	pci_set_master(pci);
-	synchronize_irq(chip->irq);
-
 	/* initialize offsets */
 	chip->bdbars_count = 2;
 	tbl = intel_regs;
@@ -1224,11 +1214,21 @@ static int snd_intel8x0m_create(struct snd_card *card,
 	chip->int_sta_reg = ICH_REG_GLOB_STA;
 	chip->int_sta_mask = int_sta_masks;
 
+	pci_set_master(pci);
+
 	if ((err = snd_intel8x0m_chip_init(chip, 1)) < 0) {
 		snd_intel8x0m_free(chip);
 		return err;
 	}
 
+	if (request_irq(pci->irq, snd_intel8x0m_interrupt, IRQF_SHARED,
+			KBUILD_MODNAME, chip)) {
+		dev_err(card->dev, "unable to grab IRQ %d\n", pci->irq);
+		snd_intel8x0m_free(chip);
+		return -EBUSY;
+	}
+	chip->irq = pci->irq;
+
 	if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops)) < 0) {
 		snd_intel8x0m_free(chip);
 		return err;
-- 
2.20.1

[PATCH AUTOSEL 4.19 166/205] arm64: dts: renesas: salvator-common: adv748x: Override secondary addresses

[Sasha Levin]

From: Kieran Bingham <kieran.bingham@ideasonboard.com>

[ Upstream commit e3da41a6c28f9b61ea03df987f1c9ffffc8b8e60 ]

Ensure that the ADV748x device addresses do not conflict, and group them
together (visually in i2cdetect)

Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/renesas/salvator-common.dtsi | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index 7d3d866a00635..3b90f816dfefc 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -420,7 +420,10 @@
 
 	video-receiver@70 {
 		compatible = "adi,adv7482";
-		reg = <0x70>;
+		reg = <0x70 0x71 0x72 0x73 0x74 0x75
+		       0x60 0x61 0x62 0x63 0x64 0x65>;
+		reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
+			    "infoframe", "cbus", "cec", "sdp", "txa", "txb" ;
 
 		#address-cells = <1>;
 		#size-cells = <0>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 167/205] arm64: dts: renesas: r8a77965: Attach the SYS-DMAC to the IPMMU

[Sasha Levin]

From: Magnus Damm <damm+renesas@opensource.se>

[ Upstream commit 4d76ad7d9de05506f1ee9a7b22416440468be090 ]

For R-Car M3-N hook up SYS-DMAC0, SYS-DMAC1 and SYS-DMAC2 to
IPMMU-DS0 and IPMMU-DS1 in same way as for R-Car M3-W.
This follows the R-Car Gen3 Rev.1.00 (April 2018) datasheet.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/renesas/r8a77965.dtsi | 24 +++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index f60f08ba1a6f9..0da4841162610 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -634,6 +634,14 @@
 			resets = <&cpg 219>;
 			#dma-cells = <1>;
 			dma-channels = <16>;
+			iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>,
+			       <&ipmmu_ds0 2>, <&ipmmu_ds0 3>,
+			       <&ipmmu_ds0 4>, <&ipmmu_ds0 5>,
+			       <&ipmmu_ds0 6>, <&ipmmu_ds0 7>,
+			       <&ipmmu_ds0 8>, <&ipmmu_ds0 9>,
+			       <&ipmmu_ds0 10>, <&ipmmu_ds0 11>,
+			       <&ipmmu_ds0 12>, <&ipmmu_ds0 13>,
+			       <&ipmmu_ds0 14>, <&ipmmu_ds0 15>;
 		};
 
 		dmac1: dma-controller@e7300000 {
@@ -668,6 +676,14 @@
 			resets = <&cpg 218>;
 			#dma-cells = <1>;
 			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>,
+			       <&ipmmu_ds1 2>, <&ipmmu_ds1 3>,
+			       <&ipmmu_ds1 4>, <&ipmmu_ds1 5>,
+			       <&ipmmu_ds1 6>, <&ipmmu_ds1 7>,
+			       <&ipmmu_ds1 8>, <&ipmmu_ds1 9>,
+			       <&ipmmu_ds1 10>, <&ipmmu_ds1 11>,
+			       <&ipmmu_ds1 12>, <&ipmmu_ds1 13>,
+			       <&ipmmu_ds1 14>, <&ipmmu_ds1 15>;
 		};
 
 		dmac2: dma-controller@e7310000 {
@@ -702,6 +718,14 @@
 			resets = <&cpg 217>;
 			#dma-cells = <1>;
 			dma-channels = <16>;
+			iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>,
+			       <&ipmmu_ds1 18>, <&ipmmu_ds1 19>,
+			       <&ipmmu_ds1 20>, <&ipmmu_ds1 21>,
+			       <&ipmmu_ds1 22>, <&ipmmu_ds1 23>,
+			       <&ipmmu_ds1 24>, <&ipmmu_ds1 25>,
+			       <&ipmmu_ds1 26>, <&ipmmu_ds1 27>,
+			       <&ipmmu_ds1 28>, <&ipmmu_ds1 29>,
+			       <&ipmmu_ds1 30>, <&ipmmu_ds1 31>;
 		};
 
 		ipmmu_ds0: mmu@e6740000 {
-- 
2.20.1

[PATCH AUTOSEL 4.19 168/205] arm64: dts: renesas: r8a77965: Fix HS-USB compatible

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 99584d93e301d820d817bba2eb77b9152e13009c ]

Should be "renesas,usbhs-r8a77965", not "renesas,usbhs-r8a7796".

Fixes: a06e8af801760a98 ("arm64: dts: renesas: r8a77965: add HS-USB node")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/renesas/r8a77965.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index 0da4841162610..2ccb1138cdf0c 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -545,7 +545,7 @@
 		};
 
 		hsusb: usb@e6590000 {
-			compatible = "renesas,usbhs-r8a7796",
+			compatible = "renesas,usbhs-r8a77965",
 				     "renesas,rcar-gen3-usbhs";
 			reg = <0 0xe6590000 0 0x100>;
 			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 169/205] arm64: dts: renesas: r8a77965: Fix clock/reset for usb2_phy1

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 7a590fe317488783a229e5a80e91868942e8463f ]

usb2_phy1 accidentally uses the same clock/reset as usb2_phy0.

Fixes: b5857630a829a8d5 ("arm64: dts: renesas: r8a77965: add usb2_phy nodes")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/renesas/r8a77965.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index 2ccb1138cdf0c..f1dfd17413b9e 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -1479,9 +1479,9 @@
 			compatible = "renesas,usb2-phy-r8a77965",
 				     "renesas,rcar-gen3-usb2-phy";
 			reg = <0 0xee0a0200 0 0x700>;
-			clocks = <&cpg CPG_MOD 703>;
+			clocks = <&cpg CPG_MOD 702>;
 			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
-			resets = <&cpg 703>;
+			resets = <&cpg 702>;
 			#phy-cells = <0>;
 			status = "disabled";
 		};
-- 
2.20.1

[PATCH AUTOSEL 4.19 170/205] pinctrl: at91-pio4: fix has_config check in atmel_pctl_dt_subnode_to_map()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit b97760ae8e3dc8bb91881c13425a0bff55f2bd85 ]

Smatch complains about this condition:

	if (has_config && num_pins >= 1)

The "has_config" variable is either uninitialized or true.  The
"num_pins" variable is unsigned and we verified that it is non-zero on
the lines before so we know "num_pines >= 1" is true.  Really, we could
just check "num_configs" directly and remove the "has_config" variable.

Fixes: 776180848b57 ("pinctrl: introduce driver for Atmel PIO4 controller")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/pinctrl-at91-pio4.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-at91-pio4.c b/drivers/pinctrl/pinctrl-at91-pio4.c
index ef7ab208b951e..9e2f3738bf3ec 100644
--- a/drivers/pinctrl/pinctrl-at91-pio4.c
+++ b/drivers/pinctrl/pinctrl-at91-pio4.c
@@ -493,7 +493,6 @@ static int atmel_pctl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
 	unsigned num_pins, num_configs, reserve;
 	unsigned long *configs;
 	struct property	*pins;
-	bool has_config;
 	u32 pinfunc;
 	int ret, i;
 
@@ -509,9 +508,6 @@ static int atmel_pctl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
 		return ret;
 	}
 
-	if (num_configs)
-		has_config = true;
-
 	num_pins = pins->length / sizeof(u32);
 	if (!num_pins) {
 		dev_err(pctldev->dev, "no pins found in node %pOF\n", np);
@@ -524,7 +520,7 @@ static int atmel_pctl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
 	 * map for each pin.
 	 */
 	reserve = 1;
-	if (has_config && num_pins >= 1)
+	if (num_configs)
 		reserve++;
 	reserve *= num_pins;
 	ret = pinctrl_utils_reserve_map(pctldev, map, reserved_maps, num_maps,
@@ -547,7 +543,7 @@ static int atmel_pctl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
 		pinctrl_utils_add_map_mux(pctldev, map, reserved_maps, num_maps,
 					  group, func);
 
-		if (has_config) {
+		if (num_configs) {
 			ret = pinctrl_utils_add_map_configs(pctldev, map,
 					reserved_maps, num_maps, group,
 					configs, num_configs,
-- 
2.20.1

[PATCH AUTOSEL 4.19 171/205] MIPS: lantiq: Do not enable IRQs in dma open

[Sasha Levin]

From: Hauke Mehrtens <hauke@hauke-m.de>

[ Upstream commit cc973aecf0b0541918c5ecabe6c90d1f709b5f89 ]

When a DMA channel is opened the IRQ should not get activated
automatically, this allows it to pull data out manually without the help
of interrupts. This is needed for a workaround in the vrx200 Ethernet
driver.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/mips/lantiq/xway/dma.c        | 1 -
 drivers/net/ethernet/lantiq_etop.c | 1 +
 2 files changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/lantiq/xway/dma.c b/arch/mips/lantiq/xway/dma.c
index 664f2f7f55c1c..982859f2b2a38 100644
--- a/arch/mips/lantiq/xway/dma.c
+++ b/arch/mips/lantiq/xway/dma.c
@@ -106,7 +106,6 @@ ltq_dma_open(struct ltq_dma_channel *ch)
 	spin_lock_irqsave(&ltq_dma_lock, flag);
 	ltq_dma_w32(ch->nr, LTQ_DMA_CS);
 	ltq_dma_w32_mask(0, DMA_CHAN_ON, LTQ_DMA_CCTRL);
-	ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN);
 	spin_unlock_irqrestore(&ltq_dma_lock, flag);
 }
 EXPORT_SYMBOL_GPL(ltq_dma_open);
diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c
index e08301d833e2e..379db19a303c8 100644
--- a/drivers/net/ethernet/lantiq_etop.c
+++ b/drivers/net/ethernet/lantiq_etop.c
@@ -439,6 +439,7 @@ ltq_etop_open(struct net_device *dev)
 		if (!IS_TX(i) && (!IS_RX(i)))
 			continue;
 		ltq_dma_open(&ch->dma);
+		ltq_dma_enable_irq(&ch->dma);
 		napi_enable(&ch->napi);
 	}
 	phy_start(dev->phydev);
-- 
2.20.1

[PATCH AUTOSEL 4.19 172/205] llc: avoid blocking in llc_sap_close()

[Sasha Levin]

From: Cong Wang <xiyou.wangcong@gmail.com>

[ Upstream commit 9708d2b5b7c648e8e0a40d11e8cea12f6277f33c ]

llc_sap_close() is called by llc_sap_put() which
could be called in BH context in llc_rcv(). We can't
block in BH.

There is no reason to block it here, kfree_rcu() should
be sufficient.

Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/llc.h  | 1 +
 net/llc/llc_core.c | 4 +---
 2 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/include/net/llc.h b/include/net/llc.h
index 890a87318014d..df282d9b40170 100644
--- a/include/net/llc.h
+++ b/include/net/llc.h
@@ -66,6 +66,7 @@ struct llc_sap {
 	int sk_count;
 	struct hlist_nulls_head sk_laddr_hash[LLC_SK_LADDR_HASH_ENTRIES];
 	struct hlist_head sk_dev_hash[LLC_SK_DEV_HASH_ENTRIES];
+	struct rcu_head rcu;
 };
 
 static inline
diff --git a/net/llc/llc_core.c b/net/llc/llc_core.c
index 260b3dc1b4a2a..64d4bef04e730 100644
--- a/net/llc/llc_core.c
+++ b/net/llc/llc_core.c
@@ -127,9 +127,7 @@ void llc_sap_close(struct llc_sap *sap)
 	list_del_rcu(&sap->node);
 	spin_unlock_bh(&llc_sap_list_lock);
 
-	synchronize_rcu();
-
-	kfree(sap);
+	kfree_rcu(sap, rcu);
 }
 
 static struct packet_type llc_packet_type __read_mostly = {
-- 
2.20.1

[PATCH AUTOSEL 4.19 173/205] ARM: dts: qcom: ipq4019: fix cpu0's qcom,saw2 reg value

[Sasha Levin]

From: Christian Lamparter <chunkeey@gmail.com>

[ Upstream commit bd73a3dd257fb838bd456a18eeee0ef0224b7a40 ]

while compiling an ipq4019 target, dtc will complain:
regulator@b089000 unit address format error, expected "2089000"

The saw0 regulator reg value seems to be
copied and pasted from qcom-ipq8064.dtsi.

This patch fixes the reg value to match that of the
unit address which in turn silences the warning.
(There is no driver for qcom,saw2 right now.
So this went unnoticed)

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 54d056b01bb51..8328ad589e2ba 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -313,7 +313,7 @@
 
                 saw0: regulator@b089000 {
                         compatible = "qcom,saw2";
-                        reg = <0x02089000 0x1000>, <0x0b009000 0x1000>;
+			reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>;
                         regulator;
                 };
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 174/205] soc: qcom: geni: Don't ignore clk_round_rate() errors in geni_se_clk_tbl_get()

[Sasha Levin]

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit e11bbcedecae85ce60a5d99ea03528c2d6f867e0 ]

The function clk_round_rate() is defined to return a "long", not an
"unsigned long".  That's because it might return a negative error
code.  Change the call in geni_se_clk_tbl_get() to check for errors.

While we're at it, get rid of a useless init of "freq".

NOTE: overall the idea that we should iterate over clk_round_rate() to
try to reconstruct a table already present in the clock driver is
questionable.  Specifically:
- This method relies on "clk_round_rate()" rounding up.
- This method only works if the table is sorted and has no duplicates.
...this patch doesn't try to fix those problems, it just makes the
error handling more correct.

Fixes: eddac5af0654 ("soc: qcom: Add GENI based QUP Wrapper driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/qcom/qcom-geni-se.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c
index feed3db21c108..1b19b8428c4ac 100644
--- a/drivers/soc/qcom/qcom-geni-se.c
+++ b/drivers/soc/qcom/qcom-geni-se.c
@@ -513,7 +513,7 @@ EXPORT_SYMBOL(geni_se_resources_on);
  */
 int geni_se_clk_tbl_get(struct geni_se *se, unsigned long **tbl)
 {
-	unsigned long freq = 0;
+	long freq = 0;
 	int i;
 
 	if (se->clk_perf_tbl) {
@@ -529,7 +529,7 @@ int geni_se_clk_tbl_get(struct geni_se *se, unsigned long **tbl)
 
 	for (i = 0; i < MAX_CLK_PERF_LEVEL; i++) {
 		freq = clk_round_rate(se->clk, freq + 1);
-		if (!freq || freq == se->clk_perf_tbl[i - 1])
+		if (freq <= 0 || freq == se->clk_perf_tbl[i - 1])
 			break;
 		se->clk_perf_tbl[i] = freq;
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.19 175/205] soc: qcom: geni: geni_se_clk_freq_match() should always accept multiples

[Sasha Levin]

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit 867d4aa7013fdee8b962cde1711f96c8dd86d926 ]

The geni_se_clk_freq_match() has some strange semantics.  Specifically
it is defined with two modes:
1. It can find a clock that's an exact multiple of the requested rate
2. It can find a non-exact match but it can't handle multiples then

...but callers should always be able to handle a clock that is a
multiple of the requested clock so mode #2 doesn't really make sense.
Let's change the semantics so that the non-exact match can also accept
multiples and then change the code to handle that.

The only caller of this code is the unlanded SPI driver [1] which
currently passes "exact = True", thus it should be safe to change the
semantics in this way.  ...and, in fact, the SPI driver should likely
be modified to pass "exact = False" (with the new semantics) since
that will allow it to work with SPI devices that request a clock rate
that doesn't exactly match a rate we can make.

[1] https://lkml.kernel.org/r/1535107336-2214-1-git-send-email-dkota@codeaurora.org

Fixes: eddac5af0654 ("soc: qcom: Add GENI based QUP Wrapper driver")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/qcom/qcom-geni-se.c | 37 ++++++++++++++++++++-------------
 1 file changed, 22 insertions(+), 15 deletions(-)

diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c
index 1b19b8428c4ac..ee89ffb6dde84 100644
--- a/drivers/soc/qcom/qcom-geni-se.c
+++ b/drivers/soc/qcom/qcom-geni-se.c
@@ -544,16 +544,17 @@ EXPORT_SYMBOL(geni_se_clk_tbl_get);
  * @se:		Pointer to the concerned serial engine.
  * @req_freq:	Requested clock frequency.
  * @index:	Index of the resultant frequency in the table.
- * @res_freq:	Resultant frequency which matches or is closer to the
- *		requested frequency.
+ * @res_freq:	Resultant frequency of the source clock.
  * @exact:	Flag to indicate exact multiple requirement of the requested
  *		frequency.
  *
- * This function is called by the protocol drivers to determine the matching
- * or exact multiple of the requested frequency, as provided by the serial
- * engine clock in order to meet the performance requirements. If there is
- * no matching or exact multiple of the requested frequency found, then it
- * selects the closest floor frequency, if exact flag is not set.
+ * This function is called by the protocol drivers to determine the best match
+ * of the requested frequency as provided by the serial engine clock in order
+ * to meet the performance requirements.
+ *
+ * If we return success:
+ * - if @exact is true  then @res_freq / <an_integer> == @req_freq
+ * - if @exact is false then @res_freq / <an_integer> <= @req_freq
  *
  * Return: 0 on success, standard Linux error codes on failure.
  */
@@ -564,6 +565,9 @@ int geni_se_clk_freq_match(struct geni_se *se, unsigned long req_freq,
 	unsigned long *tbl;
 	int num_clk_levels;
 	int i;
+	unsigned long best_delta;
+	unsigned long new_delta;
+	unsigned int divider;
 
 	num_clk_levels = geni_se_clk_tbl_get(se, &tbl);
 	if (num_clk_levels < 0)
@@ -572,18 +576,21 @@ int geni_se_clk_freq_match(struct geni_se *se, unsigned long req_freq,
 	if (num_clk_levels == 0)
 		return -EINVAL;
 
-	*res_freq = 0;
+	best_delta = ULONG_MAX;
 	for (i = 0; i < num_clk_levels; i++) {
-		if (!(tbl[i] % req_freq)) {
+		divider = DIV_ROUND_UP(tbl[i], req_freq);
+		new_delta = req_freq - tbl[i] / divider;
+		if (new_delta < best_delta) {
+			/* We have a new best! */
 			*index = i;
 			*res_freq = tbl[i];
-			return 0;
-		}
 
-		if (!(*res_freq) || ((tbl[i] > *res_freq) &&
-				     (tbl[i] < req_freq))) {
-			*index = i;
-			*res_freq = tbl[i];
+			/* If the new best is exact then we're done */
+			if (new_delta == 0)
+				return 0;
+
+			/* Record how close we got */
+			best_delta = new_delta;
 		}
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 176/205] soc: qcom: wcnss_ctrl: Avoid string overflow

[Sasha Levin]

From: Niklas Cassel <niklas.cassel@linaro.org>

[ Upstream commit 4c96ed170d658d8826d94edec8ac93ee777981a2 ]

'chinfo.name' is used as a NUL-terminated string, but using strncpy() with
the length equal to the buffer size may result in lack of the termination:

drivers//soc/qcom/wcnss_ctrl.c: In function 'qcom_wcnss_open_channel':
drivers//soc/qcom/wcnss_ctrl.c:284:2: warning: 'strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
  strncpy(chinfo.name, name, sizeof(chinfo.name));
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This changes it to use the safer strscpy() instead.

Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/qcom/wcnss_ctrl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/soc/qcom/wcnss_ctrl.c b/drivers/soc/qcom/wcnss_ctrl.c
index df3ccb30bc2dd..373400dd816d6 100644
--- a/drivers/soc/qcom/wcnss_ctrl.c
+++ b/drivers/soc/qcom/wcnss_ctrl.c
@@ -281,7 +281,7 @@ struct rpmsg_endpoint *qcom_wcnss_open_channel(void *wcnss, const char *name, rp
 	struct rpmsg_channel_info chinfo;
 	struct wcnss_ctrl *_wcnss = wcnss;
 
-	strncpy(chinfo.name, name, sizeof(chinfo.name));
+	strscpy(chinfo.name, name, sizeof(chinfo.name));
 	chinfo.src = RPMSG_ADDR_ANY;
 	chinfo.dst = RPMSG_ADDR_ANY;
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 177/205] soc: qcom: apr: Avoid string overflow

[Sasha Levin]

From: Niklas Cassel <niklas.cassel@linaro.org>

[ Upstream commit 4fadb26574cb74e5de079dd384f25f44f4fb3ec3 ]

'adev->name' is used as a NUL-terminated string, but using strncpy() with the
length equal to the buffer size may result in lack of the termination:

In function 'apr_add_device',
    inlined from 'of_register_apr_devices' at drivers//soc/qcom/apr.c:264:7,
    inlined from 'apr_probe' at drivers//soc/qcom/apr.c:290:2:
drivers//soc/qcom/apr.c:222:3: warning: 'strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
   strncpy(adev->name, np->name, APR_NAME_SIZE);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This changes it to use the safer strscpy() instead.

Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/qcom/apr.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/qcom/apr.c b/drivers/soc/qcom/apr.c
index 57af8a5373325..ee9197f5aae96 100644
--- a/drivers/soc/qcom/apr.c
+++ b/drivers/soc/qcom/apr.c
@@ -219,9 +219,9 @@ static int apr_add_device(struct device *dev, struct device_node *np,
 	adev->domain_id = id->domain_id;
 	adev->version = id->svc_version;
 	if (np)
-		strncpy(adev->name, np->name, APR_NAME_SIZE);
+		strscpy(adev->name, np->name, APR_NAME_SIZE);
 	else
-		strncpy(adev->name, id->name, APR_NAME_SIZE);
+		strscpy(adev->name, id->name, APR_NAME_SIZE);
 
 	dev_set_name(&adev->dev, "aprsvc:%s:%x:%x", adev->name,
 		     id->domain_id, id->svc_id);
-- 
2.20.1

[PATCH AUTOSEL 4.19 178/205] drivers: qcom: rpmh-rsc: clear wait_for_compl after use

[Sasha Levin]

From: Lina Iyer <ilina@codeaurora.org>

[ Upstream commit 09e97b6c8754c91470455e69ebd827b741f80af5 ]

The wait_for_compl register ensures the request sequence is maintained
when sending requests from the TCS. Clear the register after sending
active request and during invalidate of the sleep and wake TCS.

Reported-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/soc/qcom/rpmh-rsc.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c
index ee75da66d64bf..75bd9a83aef00 100644
--- a/drivers/soc/qcom/rpmh-rsc.c
+++ b/drivers/soc/qcom/rpmh-rsc.c
@@ -121,6 +121,7 @@ static int tcs_invalidate(struct rsc_drv *drv, int type)
 			return -EAGAIN;
 		}
 		write_tcs_reg_sync(drv, RSC_DRV_CMD_ENABLE, m, 0);
+		write_tcs_reg_sync(drv, RSC_DRV_CMD_WAIT_FOR_CMPL, m, 0);
 	}
 	bitmap_zero(tcs->slots, MAX_TCS_SLOTS);
 	spin_unlock(&tcs->lock);
@@ -239,6 +240,7 @@ static irqreturn_t tcs_tx_done(int irq, void *p)
 skip:
 		/* Reclaim the TCS */
 		write_tcs_reg(drv, RSC_DRV_CMD_ENABLE, i, 0);
+		write_tcs_reg(drv, RSC_DRV_CMD_WAIT_FOR_CMPL, i, 0);
 		write_tcs_reg(drv, RSC_DRV_IRQ_CLEAR, 0, BIT(i));
 		spin_lock(&drv->lock);
 		clear_bit(i, drv->tcs_in_use);
-- 
2.20.1

[PATCH AUTOSEL 4.19 179/205] arm64: dts: broadcom: Fix I2C and SPI bus warnings

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit 7cdbe45da1a189e744e6801aebb462ee47235580 ]

dtc has new checks for I2C and SPI buses. Fix the warnings in node names
and unit-addresses.

arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dtb: Warning (i2c_bus_reg): /hsls/i2c@e0000/pcf8574@20: I2C bus unit address format error, expected "27"
arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dtb: Warning (i2c_bus_reg): /hsls/i2c@e0000/pcf8574@20: I2C bus unit address format error, expected "27"
arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dtb: Warning (spi_bus_bridge): /hsls/ssp@180000: node name for SPI buses should be 'spi'
arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dtb: Warning (spi_bus_bridge): /hsls/ssp@190000: node name for SPI buses should be 'spi'

Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Jon Mason <jonmason@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi          | 4 ++--
 arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi | 2 +-
 arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi       | 4 ++--
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
index 1a406a76c86a2..ea854f689fda8 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
@@ -639,7 +639,7 @@
 			status = "disabled";
 		};
 
-		ssp0: ssp@66180000 {
+		ssp0: spi@66180000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x66180000 0x1000>;
 			interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>;
@@ -650,7 +650,7 @@
 			status = "disabled";
 		};
 
-		ssp1: ssp@66190000 {
+		ssp1: spi@66190000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x66190000 0x1000>;
 			interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
index bc299c3d90683..a9b92e52d50e8 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
@@ -138,7 +138,7 @@
 &i2c1 {
 	status = "okay";
 
-	pcf8574: pcf8574@20 {
+	pcf8574: pcf8574@27 {
 		compatible = "nxp,pcf8574a";
 		gpio-controller;
 		#gpio-cells = <2>;
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index e283480bfc7e5..cfeaa855bd05a 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -521,7 +521,7 @@
 			status = "disabled";
 		};
 
-		ssp0: ssp@180000 {
+		ssp0: spi@180000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x00180000 0x1000>;
 			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
@@ -533,7 +533,7 @@
 			status = "disabled";
 		};
 
-		ssp1: ssp@190000 {
+		ssp1: spi@190000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x00190000 0x1000>;
 			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 180/205] ARM: dts: bcm: Fix SPI bus warnings

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit ab0b47d2eff413d60b0a1fc0c1f87f87f0d7f375 ]

dtc has new checks for SPI buses. Fix the warnings in node names.

arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dtb: Warning (spi_bus_bridge): /axi@18000000/qspi@27200: node name for SPI buses should be 'spi'
arch/arm/boot/dts/bcm958525er.dtb: Warning (spi_bus_bridge): /axi/qspi@27200: node name for SPI buses should be 'spi'
arch/arm/boot/dts/bcm958525xmc.dtb: Warning (spi_bus_bridge): /axi/qspi@27200: node name for SPI buses should be 'spi'
arch/arm/boot/dts/bcm958622hr.dtb: Warning (spi_bus_bridge): /axi/qspi@27200: node name for SPI buses should be 'spi'
arch/arm/boot/dts/bcm958625hr.dtb: Warning (spi_bus_bridge): /axi/qspi@27200: node name for SPI buses should be 'spi'
arch/arm/boot/dts/bcm988312hr.dtb: Warning (spi_bus_bridge): /axi/qspi@27200: node name for SPI buses should be 'spi'

Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Jon Mason <jonmason@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm-hr2.dtsi | 2 +-
 arch/arm/boot/dts/bcm-nsp.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi
index 3084a7c957339..e4d49731287f6 100644
--- a/arch/arm/boot/dts/bcm-hr2.dtsi
+++ b/arch/arm/boot/dts/bcm-hr2.dtsi
@@ -216,7 +216,7 @@
 			reg = <0x33000 0x14>;
 		};
 
-		qspi: qspi@27200 {
+		qspi: spi@27200 {
 			compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
 			reg = <0x027200 0x184>,
 			      <0x027000 0x124>,
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 09ba850463228..2b219addeb449 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -273,7 +273,7 @@
 			brcm,nand-has-wp;
 		};
 
-		qspi: qspi@27200 {
+		qspi: spi@27200 {
 			compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi";
 			reg = <0x027200 0x184>,
 			      <0x027000 0x124>,
-- 
2.20.1

[PATCH AUTOSEL 4.19 181/205] ARM: dts: aspeed: Fix I2C bus warnings

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit 1426d40e11f730e0c0fd3700a7048082f87b0e6e ]

dtc has new checks for I2C buses. The ASpeed dts files have a node named
'i2c' which causes a false positive warning. As the node is a 'simple-bus',
correct the node name to be 'bus' to fix the warnings.

arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dtb: Warning (i2c_bus_bridge): /ahb/apb/i2c@1e78a000: incorrect #size-cells for I2C bus
arch/arm/boot/dts/aspeed-bmc-opp-romulus.dtb: Warning (i2c_bus_bridge): /ahb/apb/i2c@1e78a000: incorrect #size-cells for I2C bus
arch/arm/boot/dts/aspeed-ast2500-evb.dtb: Warning (i2c_bus_bridge): /ahb/apb/i2c@1e78a000: incorrect #size-cells for I2C bus
arch/arm/boot/dts/aspeed-bmc-arm-centriq2400-rep.dtb: Warning (i2c_bus_bridge): /ahb/apb/i2c@1e78a000: incorrect #size-cells for I2C bus
arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dtb: Warning (i2c_bus_bridge): /ahb/apb/i2c@1e78a000: incorrect #size-cells for I2C bus
arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dtb: Warning (i2c_bus_bridge): /ahb/apb/i2c@1e78a000: incorrect #size-cells for I2C bus
arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dtb: Warning (i2c_bus_bridge): /ahb/apb/i2c@1e78a000: incorrect #size-cells for I2C bus
arch/arm/boot/dts/aspeed-bmc-opp-zaius.dtb: Warning (i2c_bus_bridge): /ahb/apb/i2c@1e78a000: incorrect #size-cells for I2C bus
arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dtb: Warning (i2c_bus_bridge): /ahb/apb/i2c@1e78a000: incorrect #size-cells for I2C bus
arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dtb: Warning (i2c_bus_bridge): /ahb/apb/i2c@1e78a000: incorrect #size-cells for I2C bus

Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: linux-aspeed@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/aspeed-g4.dtsi | 2 +-
 arch/arm/boot/dts/aspeed-g5.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index b23a983f95a53..69f6b9d2e7e7d 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -350,7 +350,7 @@
 				status = "disabled";
 			};
 
-			i2c: i2c@1e78a000 {
+			i2c: bus@1e78a000 {
 				compatible = "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 87fdc146ff525..d107459fc0f89 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -410,7 +410,7 @@
 				status = "disabled";
 			};
 
-			i2c: i2c@1e78a000 {
+			i2c: bus@1e78a000 {
 				compatible = "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 182/205] powerpc/vdso: Correct call frame information

[Sasha Levin]

From: Alan Modra <amodra@gmail.com>

[ Upstream commit 56d20861c027498b5a1112b4f9f05b56d906fdda ]

Call Frame Information is used by gdb for back-traces and inserting
breakpoints on function return for the "finish" command.  This failed
when inside __kernel_clock_gettime.  More concerning than difficulty
debugging is that CFI is also used by stack frame unwinding code to
implement exceptions.  If you have an app that needs to handle
asynchronous exceptions for some reason, and you are unlucky enough to
get one inside the VDSO time functions, your app will crash.

What's wrong:  There is control flow in __kernel_clock_gettime that
reaches label 99 without saving lr in r12.  CFI info however is
interpreted by the unwinder without reference to control flow: It's a
simple matter of "Execute all the CFI opcodes up to the current
address".  That means the unwinder thinks r12 contains the return
address at label 99.  Disabuse it of that notion by resetting CFI for
the return address at label 99.

Note that the ".cfi_restore lr" could have gone anywhere from the
"mtlr r12" a few instructions earlier to the instruction at label 99.
I put the CFI as late as possible, because in general that's best
practice (and if possible grouped with other CFI in order to reduce
the number of CFI opcodes executed when unwinding).  Using r12 as the
return address is perfectly fine after the "mtlr r12" since r12 on
that code path still contains the return address.

__get_datapage also has a CFI error.  That function temporarily saves
lr in r0, and reflects that fact with ".cfi_register lr,r0".  A later
use of r0 means the CFI at that point isn't correct, as r0 no longer
contains the return address.  Fix that too.

Signed-off-by: Alan Modra <amodra@gmail.com>
Tested-by: Reza Arbab <arbab@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/vdso32/datapage.S     | 1 +
 arch/powerpc/kernel/vdso32/gettimeofday.S | 1 +
 arch/powerpc/kernel/vdso64/datapage.S     | 1 +
 arch/powerpc/kernel/vdso64/gettimeofday.S | 1 +
 4 files changed, 4 insertions(+)

diff --git a/arch/powerpc/kernel/vdso32/datapage.S b/arch/powerpc/kernel/vdso32/datapage.S
index 3745113fcc652..2a7eb5452aba7 100644
--- a/arch/powerpc/kernel/vdso32/datapage.S
+++ b/arch/powerpc/kernel/vdso32/datapage.S
@@ -37,6 +37,7 @@ data_page_branch:
 	mtlr	r0
 	addi	r3, r3, __kernel_datapage_offset-data_page_branch
 	lwz	r0,0(r3)
+  .cfi_restore lr
 	add	r3,r0,r3
 	blr
   .cfi_endproc
diff --git a/arch/powerpc/kernel/vdso32/gettimeofday.S b/arch/powerpc/kernel/vdso32/gettimeofday.S
index 75cff3f336b3a..afd516b572f86 100644
--- a/arch/powerpc/kernel/vdso32/gettimeofday.S
+++ b/arch/powerpc/kernel/vdso32/gettimeofday.S
@@ -139,6 +139,7 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime)
 	 */
 99:
 	li	r0,__NR_clock_gettime
+  .cfi_restore lr
 	sc
 	blr
   .cfi_endproc
diff --git a/arch/powerpc/kernel/vdso64/datapage.S b/arch/powerpc/kernel/vdso64/datapage.S
index abf17feffe404..bf96686915116 100644
--- a/arch/powerpc/kernel/vdso64/datapage.S
+++ b/arch/powerpc/kernel/vdso64/datapage.S
@@ -37,6 +37,7 @@ data_page_branch:
 	mtlr	r0
 	addi	r3, r3, __kernel_datapage_offset-data_page_branch
 	lwz	r0,0(r3)
+  .cfi_restore lr
 	add	r3,r0,r3
 	blr
   .cfi_endproc
diff --git a/arch/powerpc/kernel/vdso64/gettimeofday.S b/arch/powerpc/kernel/vdso64/gettimeofday.S
index afbad2ac31472..1f324c28705bc 100644
--- a/arch/powerpc/kernel/vdso64/gettimeofday.S
+++ b/arch/powerpc/kernel/vdso64/gettimeofday.S
@@ -169,6 +169,7 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime)
 	 */
 99:
 	li	r0,__NR_clock_gettime
+  .cfi_restore lr
 	sc
 	blr
   .cfi_endproc
-- 
2.20.1

[PATCH AUTOSEL 4.19 182/205] powerpc/vdso: Correct call frame information

[Sasha Levin]

From: Alan Modra <amodra@gmail.com>

[ Upstream commit 56d20861c027498b5a1112b4f9f05b56d906fdda ]

Call Frame Information is used by gdb for back-traces and inserting
breakpoints on function return for the "finish" command.  This failed
when inside __kernel_clock_gettime.  More concerning than difficulty
debugging is that CFI is also used by stack frame unwinding code to
implement exceptions.  If you have an app that needs to handle
asynchronous exceptions for some reason, and you are unlucky enough to
get one inside the VDSO time functions, your app will crash.

What's wrong:  There is control flow in __kernel_clock_gettime that
reaches label 99 without saving lr in r12.  CFI info however is
interpreted by the unwinder without reference to control flow: It's a
simple matter of "Execute all the CFI opcodes up to the current
address".  That means the unwinder thinks r12 contains the return
address at label 99.  Disabuse it of that notion by resetting CFI for
the return address at label 99.

Note that the ".cfi_restore lr" could have gone anywhere from the
"mtlr r12" a few instructions earlier to the instruction at label 99.
I put the CFI as late as possible, because in general that's best
practice (and if possible grouped with other CFI in order to reduce
the number of CFI opcodes executed when unwinding).  Using r12 as the
return address is perfectly fine after the "mtlr r12" since r12 on
that code path still contains the return address.

__get_datapage also has a CFI error.  That function temporarily saves
lr in r0, and reflects that fact with ".cfi_register lr,r0".  A later
use of r0 means the CFI at that point isn't correct, as r0 no longer
contains the return address.  Fix that too.

Signed-off-by: Alan Modra <amodra@gmail.com>
Tested-by: Reza Arbab <arbab@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/powerpc/kernel/vdso32/datapage.S     | 1 +
 arch/powerpc/kernel/vdso32/gettimeofday.S | 1 +
 arch/powerpc/kernel/vdso64/datapage.S     | 1 +
 arch/powerpc/kernel/vdso64/gettimeofday.S | 1 +
 4 files changed, 4 insertions(+)

diff --git a/arch/powerpc/kernel/vdso32/datapage.S b/arch/powerpc/kernel/vdso32/datapage.S
index 3745113fcc652..2a7eb5452aba7 100644
--- a/arch/powerpc/kernel/vdso32/datapage.S
+++ b/arch/powerpc/kernel/vdso32/datapage.S
@@ -37,6 +37,7 @@ data_page_branch:
 	mtlr	r0
 	addi	r3, r3, __kernel_datapage_offset-data_page_branch
 	lwz	r0,0(r3)
+  .cfi_restore lr
 	add	r3,r0,r3
 	blr
   .cfi_endproc
diff --git a/arch/powerpc/kernel/vdso32/gettimeofday.S b/arch/powerpc/kernel/vdso32/gettimeofday.S
index 75cff3f336b3a..afd516b572f86 100644
--- a/arch/powerpc/kernel/vdso32/gettimeofday.S
+++ b/arch/powerpc/kernel/vdso32/gettimeofday.S
@@ -139,6 +139,7 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime)
 	 */
 99:
 	li	r0,__NR_clock_gettime
+  .cfi_restore lr
 	sc
 	blr
   .cfi_endproc
diff --git a/arch/powerpc/kernel/vdso64/datapage.S b/arch/powerpc/kernel/vdso64/datapage.S
index abf17feffe404..bf96686915116 100644
--- a/arch/powerpc/kernel/vdso64/datapage.S
+++ b/arch/powerpc/kernel/vdso64/datapage.S
@@ -37,6 +37,7 @@ data_page_branch:
 	mtlr	r0
 	addi	r3, r3, __kernel_datapage_offset-data_page_branch
 	lwz	r0,0(r3)
+  .cfi_restore lr
 	add	r3,r0,r3
 	blr
   .cfi_endproc
diff --git a/arch/powerpc/kernel/vdso64/gettimeofday.S b/arch/powerpc/kernel/vdso64/gettimeofday.S
index afbad2ac31472..1f324c28705bc 100644
--- a/arch/powerpc/kernel/vdso64/gettimeofday.S
+++ b/arch/powerpc/kernel/vdso64/gettimeofday.S
@@ -169,6 +169,7 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime)
 	 */
 99:
 	li	r0,__NR_clock_gettime
+  .cfi_restore lr
 	sc
 	blr
   .cfi_endproc
-- 
2.20.1

[PATCH AUTOSEL 4.19 183/205] ARM: dts: socfpga: Fix I2C bus unit-address error

[Sasha Levin]

From: Dinh Nguyen <dinguyen@kernel.org>

[ Upstream commit cbbc488ed85061a765cf370c3e41f383c1e0add6 ]

dtc has new checks for I2C buses. Fix the warnings in unit-addresses.

arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dtb: Warning (i2c_bus_reg): /soc/i2c@ffc04000/adxl345@0: I2C bus unit address format error, expected "53"

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts
index b280e64941938..31b01a998b2ed 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_de0_sockit.dts
@@ -88,7 +88,7 @@
 	status = "okay";
 	clock-frequency = <100000>;
 
-	adxl345: adxl345@0 {
+	adxl345: adxl345@53 {
 		compatible = "adi,adxl345";
 		reg = <0x53>;
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 184/205] ARM: dts: sunxi: Fix I2C bus warnings

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit 0729b4af5753b65aa031f58c435da53dbbf56d19 ]

dtc has new checks for I2C buses. Fix the warnings in unit-addresses.

arch/arm/boot/dts/sun8i-a23-gt90h-v4.dtb: Warning (i2c_bus_reg): /soc@1c00000/i2c@1c2ac00/touchscreen@0: I2C bus unit address format error, expected "40"
arch/arm/boot/dts/sun8i-a23-inet86dz.dtb: Warning (i2c_bus_reg): /soc@1c00000/i2c@1c2ac00/touchscreen@0: I2C bus unit address format error, expected "40"
arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dtb: Warning (i2c_bus_reg): /soc@1c00000/i2c@1c2ac00/touchscreen@0: I2C bus unit address format error, expected "40"
arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dtb: Warning (i2c_bus_reg): /soc@1c00000/i2c@1c2ac00/touchscreen@0: I2C bus unit address format error, expected "40"
arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dtb: Warning (i2c_bus_reg): /soc@1c00000/i2c@1c2ac00/touchscreen@0: I2C bus unit address format error, expected "40"
arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dtb: Warning (i2c_bus_reg): /soc@1c00000/i2c@1c2ac00/touchscreen@0: missing or empty reg property
arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dtb: Warning (i2c_bus_reg): /soc@1c00000/i2c@1c2ac00/touchscreen@0: missing or empty reg property
arch/arm/boot/dts/sun8i-a33-q8-tablet.dtb: Warning (i2c_bus_reg): /soc@1c00000/i2c@1c2ac00/touchscreen@0: missing or empty reg property
arch/arm/boot/dts/sun5i-a13-utoo-p66.dtb: Warning (i2c_bus_reg): /soc@1c00000/i2c@1c2b000/touchscreen: I2C bus unit address format error, expected "40"
arch/arm/boot/dts/sun5i-a13-difrnce-dit4350.dtb: Warning (i2c_bus_reg): /soc@1c00000/i2c@1c2b000/touchscreen: missing or empty reg property
arch/arm/boot/dts/sun5i-a13-empire-electronix-m712.dtb: Warning (i2c_bus_reg): /soc@1c00000/i2c@1c2b000/touchscreen: missing or empty reg property
arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dtb: Warning (i2c_bus_reg): /soc@1c00000/i2c@1c2b000/touchscreen: missing or empty reg property
arch/arm/boot/dts/sun5i-a13-q8-tablet.dtb: Warning (i2c_bus_reg): /soc@1c00000/i2c@1c2b000/touchscreen: missing or empty reg property

Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi | 3 ++-
 arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi | 3 ++-
 arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts    | 2 +-
 3 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
index 8acbaab14fe51..d2a2eb8b3f262 100644
--- a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
@@ -92,7 +92,8 @@
 	 */
 	clock-frequency = <400000>;
 
-	touchscreen: touchscreen {
+	touchscreen: touchscreen@40 {
+		reg = <0x40>;
 		interrupt-parent = <&pio>;
 		interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>; /* EINT11 (PG11) */
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
index 880096c7e2523..5e8a95af89b8c 100644
--- a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
@@ -69,7 +69,8 @@
 	 */
 	clock-frequency = <400000>;
 
-	touchscreen: touchscreen@0 {
+	touchscreen: touchscreen@40 {
+		reg = <0x40>;
 		interrupt-parent = <&pio>;
 		interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5 */
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
index 35859d8f3267f..bf97f6244c233 100644
--- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
+++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
@@ -95,7 +95,7 @@
 &i2c0 {
 	status = "okay";
 
-	axp22x: pmic@68 {
+	axp22x: pmic@34 {
 		compatible = "x-powers,axp221";
 		reg = <0x34>;
 		interrupt-parent = <&nmi_intc>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 185/205] pinctrl: at91: don't use the same irqchip with multiple gpiochips

[Sasha Levin]

From: Ludovic Desroches <ludovic.desroches@microchip.com>

[ Upstream commit 0c3dfa176912b5f87732545598200fb55e9c1978 ]

Sharing the same irqchip with multiple gpiochips is not a good
practice. For instance, when installing hooks, we change the state
of the irqchip. The initial state of the irqchip for the second
gpiochip to register is then disrupted.

Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/pinctrl-at91.c | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index 50f0ec42c6372..fad0e132ead84 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -1574,16 +1574,6 @@ void at91_pinctrl_gpio_resume(void)
 #define gpio_irq_set_wake	NULL
 #endif /* CONFIG_PM */
 
-static struct irq_chip gpio_irqchip = {
-	.name		= "GPIO",
-	.irq_ack	= gpio_irq_ack,
-	.irq_disable	= gpio_irq_mask,
-	.irq_mask	= gpio_irq_mask,
-	.irq_unmask	= gpio_irq_unmask,
-	/* .irq_set_type is set dynamically */
-	.irq_set_wake	= gpio_irq_set_wake,
-};
-
 static void gpio_irq_handler(struct irq_desc *desc)
 {
 	struct irq_chip *chip = irq_desc_get_chip(desc);
@@ -1624,12 +1614,22 @@ static int at91_gpio_of_irq_setup(struct platform_device *pdev,
 	struct gpio_chip	*gpiochip_prev = NULL;
 	struct at91_gpio_chip   *prev = NULL;
 	struct irq_data		*d = irq_get_irq_data(at91_gpio->pioc_virq);
+	struct irq_chip		*gpio_irqchip;
 	int ret, i;
 
+	gpio_irqchip = devm_kzalloc(&pdev->dev, sizeof(*gpio_irqchip), GFP_KERNEL);
+	if (!gpio_irqchip)
+		return -ENOMEM;
+
 	at91_gpio->pioc_hwirq = irqd_to_hwirq(d);
 
-	/* Setup proper .irq_set_type function */
-	gpio_irqchip.irq_set_type = at91_gpio->ops->irq_type;
+	gpio_irqchip->name = "GPIO";
+	gpio_irqchip->irq_ack = gpio_irq_ack;
+	gpio_irqchip->irq_disable = gpio_irq_mask;
+	gpio_irqchip->irq_mask = gpio_irq_mask;
+	gpio_irqchip->irq_unmask = gpio_irq_unmask;
+	gpio_irqchip->irq_set_wake = gpio_irq_set_wake,
+	gpio_irqchip->irq_set_type = at91_gpio->ops->irq_type;
 
 	/* Disable irqs of this PIO controller */
 	writel_relaxed(~0, at91_gpio->regbase + PIO_IDR);
@@ -1640,7 +1640,7 @@ static int at91_gpio_of_irq_setup(struct platform_device *pdev,
 	 * interrupt.
 	 */
 	ret = gpiochip_irqchip_add(&at91_gpio->chip,
-				   &gpio_irqchip,
+				   gpio_irqchip,
 				   0,
 				   handle_edge_irq,
 				   IRQ_TYPE_NONE);
@@ -1658,7 +1658,7 @@ static int at91_gpio_of_irq_setup(struct platform_device *pdev,
 	if (!gpiochip_prev) {
 		/* Then register the chain on the parent IRQ */
 		gpiochip_set_chained_irqchip(&at91_gpio->chip,
-					     &gpio_irqchip,
+					     gpio_irqchip,
 					     at91_gpio->pioc_virq,
 					     gpio_irq_handler);
 		return 0;
-- 
2.20.1

[PATCH AUTOSEL 4.19 186/205] ARM: dts: sun9i: Fix I2C bus warnings

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit 57a83c5222c1b5e7b3acc72c6e60fce00a38991a ]

dtc has new checks for I2C buses. The sun9i-a80 dts file has a node named
'i2c' which causes a false positive warning. As the node is a RSB bus,
correct the node name to be 'rsb' to fix the warnings.

arch/arm/boot/dts/sun9i-a80-cubieboard4.dtb: Warning (i2c_bus_reg): /soc/i2c@8003400/codec@e89:reg: I2C address must be less than 10-bits, got "0xe89"
arch/arm/boot/dts/sun9i-a80-cubieboard4.dtb: Warning (i2c_bus_reg): /soc/i2c@8003400/pmic@745:reg: I2C address must be less than 10-bits, got "0x745"
arch/arm/boot/dts/sun9i-a80-optimus.dtb: Warning (i2c_bus_reg): /soc/i2c@8003400/codec@e89:reg: I2C address must be less than 10-bits, got "0xe89"
arch/arm/boot/dts/sun9i-a80-optimus.dtb: Warning (i2c_bus_reg): /soc/i2c@8003400/pmic@745:reg: I2C address must be less than 10-bits, got "0x745"

Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/sun9i-a80.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 25591d6883ef2..d9532fb1ef650 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -1196,7 +1196,7 @@
 			};
 		};
 
-		r_rsb: i2c@8003400 {
+		r_rsb: rsb@8003400 {
 			compatible = "allwinner,sun8i-a23-rsb";
 			reg = <0x08003400 0x400>;
 			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 187/205] android: binder: no outgoing transaction when thread todo has transaction

[Sasha Levin]

From: Sherry Yang <sherryy@android.com>

[ Upstream commit 44b73962cb25f1c8170ea695c4564b05a75e1fd4 ]

When a process dies, failed reply is sent to the sender of any transaction
queued on a dead thread's todo list. The sender asserts that the
received failed reply corresponds to the head of the transaction stack.
This assert can fail if the dead thread is allowed to send outgoing
transactions when there is already a transaction on its todo list,
because this new transaction can end up on the transaction stack of the
original sender. The following steps illustrate how this assertion can
fail.

1. Thread1 sends txn19 to Thread2
   (T1->transaction_stack=txn19, T2->todo+=txn19)
2. Without processing todo list, Thread2 sends txn20 to Thread1
   (T1->todo+=txn20, T2->transaction_stack=txn20)
3. T1 processes txn20 on its todo list
   (T1->transaction_stack=txn20->txn19, T1->todo=<empty>)
4. T2 dies, T2->todo cleanup attempts to send failed reply for txn19, but
   T1->transaction_stack points to txn20 -- assertion failes

Step 2. is the incorrect behavior. When there is a transaction on a
thread's todo list, this thread should not be able to send any outgoing
synchronous transactions. Only the head of the todo list needs to be
checked because only threads that are waiting for proc work can directly
receive work from another thread, and no work is allowed to be queued
on such a thread without waking up the thread. This patch also enforces
that a thread is not waiting for proc work when a work is directly
enqueued to its todo list.

Acked-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Sherry Yang <sherryy@android.com>
Reviewed-by: Martijn Coenen <maco@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/android/binder.c | 44 +++++++++++++++++++++++++++++-----------
 1 file changed, 32 insertions(+), 12 deletions(-)

diff --git a/drivers/android/binder.c b/drivers/android/binder.c
index 6e04e7a707a12..cf4367135a00b 100644
--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -822,6 +822,7 @@ static void
 binder_enqueue_deferred_thread_work_ilocked(struct binder_thread *thread,
 					    struct binder_work *work)
 {
+	WARN_ON(!list_empty(&thread->waiting_thread_node));
 	binder_enqueue_work_ilocked(work, &thread->todo);
 }
 
@@ -839,6 +840,7 @@ static void
 binder_enqueue_thread_work_ilocked(struct binder_thread *thread,
 				   struct binder_work *work)
 {
+	WARN_ON(!list_empty(&thread->waiting_thread_node));
 	binder_enqueue_work_ilocked(work, &thread->todo);
 	thread->process_todo = true;
 }
@@ -1270,19 +1272,12 @@ static int binder_inc_node_nilocked(struct binder_node *node, int strong,
 		} else
 			node->local_strong_refs++;
 		if (!node->has_strong_ref && target_list) {
+			struct binder_thread *thread = container_of(target_list,
+						    struct binder_thread, todo);
 			binder_dequeue_work_ilocked(&node->work);
-			/*
-			 * Note: this function is the only place where we queue
-			 * directly to a thread->todo without using the
-			 * corresponding binder_enqueue_thread_work() helper
-			 * functions; in this case it's ok to not set the
-			 * process_todo flag, since we know this node work will
-			 * always be followed by other work that starts queue
-			 * processing: in case of synchronous transactions, a
-			 * BR_REPLY or BR_ERROR; in case of oneway
-			 * transactions, a BR_TRANSACTION_COMPLETE.
-			 */
-			binder_enqueue_work_ilocked(&node->work, target_list);
+			BUG_ON(&thread->todo != target_list);
+			binder_enqueue_deferred_thread_work_ilocked(thread,
+								   &node->work);
 		}
 	} else {
 		if (!internal)
@@ -2733,6 +2728,7 @@ static void binder_transaction(struct binder_proc *proc,
 {
 	int ret;
 	struct binder_transaction *t;
+	struct binder_work *w;
 	struct binder_work *tcomplete;
 	binder_size_t *offp, *off_end, *off_start;
 	binder_size_t off_min;
@@ -2874,6 +2870,29 @@ static void binder_transaction(struct binder_proc *proc,
 			goto err_invalid_target_handle;
 		}
 		binder_inner_proc_lock(proc);
+
+		w = list_first_entry_or_null(&thread->todo,
+					     struct binder_work, entry);
+		if (!(tr->flags & TF_ONE_WAY) && w &&
+		    w->type == BINDER_WORK_TRANSACTION) {
+			/*
+			 * Do not allow new outgoing transaction from a
+			 * thread that has a transaction at the head of
+			 * its todo list. Only need to check the head
+			 * because binder_select_thread_ilocked picks a
+			 * thread from proc->waiting_threads to enqueue
+			 * the transaction, and nothing is queued to the
+			 * todo list while the thread is on waiting_threads.
+			 */
+			binder_user_error("%d:%d new transaction not allowed when there is a transaction on thread todo\n",
+					  proc->pid, thread->pid);
+			binder_inner_proc_unlock(proc);
+			return_error = BR_FAILED_REPLY;
+			return_error_param = -EPROTO;
+			return_error_line = __LINE__;
+			goto err_bad_todo_list;
+		}
+
 		if (!(tr->flags & TF_ONE_WAY) && thread->transaction_stack) {
 			struct binder_transaction *tmp;
 
@@ -3256,6 +3275,7 @@ err_alloc_tcomplete_failed:
 	kfree(t);
 	binder_stats_deleted(BINDER_STAT_TRANSACTION);
 err_alloc_t_failed:
+err_bad_todo_list:
 err_bad_call_stack:
 err_empty_call_stack:
 err_dead_binder:
-- 
2.20.1

[PATCH AUTOSEL 4.19 187/205] android: binder: no outgoing transaction when thread todo has transaction

[Sasha Levin]

From: Sherry Yang <sherryy@android.com>

[ Upstream commit 44b73962cb25f1c8170ea695c4564b05a75e1fd4 ]

When a process dies, failed reply is sent to the sender of any transaction
queued on a dead thread's todo list. The sender asserts that the
received failed reply corresponds to the head of the transaction stack.
This assert can fail if the dead thread is allowed to send outgoing
transactions when there is already a transaction on its todo list,
because this new transaction can end up on the transaction stack of the
original sender. The following steps illustrate how this assertion can
fail.

1. Thread1 sends txn19 to Thread2
   (T1->transaction_stack=txn19, T2->todo+=txn19)
2. Without processing todo list, Thread2 sends txn20 to Thread1
   (T1->todo+=txn20, T2->transaction_stack=txn20)
3. T1 processes txn20 on its todo list
   (T1->transaction_stack=txn20->txn19, T1->todo=<empty>)
4. T2 dies, T2->todo cleanup attempts to send failed reply for txn19, but
   T1->transaction_stack points to txn20 -- assertion failes

Step 2. is the incorrect behavior. When there is a transaction on a
thread's todo list, this thread should not be able to send any outgoing
synchronous transactions. Only the head of the todo list needs to be
checked because only threads that are waiting for proc work can directly
receive work from another thread, and no work is allowed to be queued
on such a thread without waking up the thread. This patch also enforces
that a thread is not waiting for proc work when a work is directly
enqueued to its todo list.

Acked-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Sherry Yang <sherryy@android.com>
Reviewed-by: Martijn Coenen <maco@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/android/binder.c | 44 +++++++++++++++++++++++++++++-----------
 1 file changed, 32 insertions(+), 12 deletions(-)

diff --git a/drivers/android/binder.c b/drivers/android/binder.c
index 6e04e7a707a12..cf4367135a00b 100644
--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -822,6 +822,7 @@ static void
 binder_enqueue_deferred_thread_work_ilocked(struct binder_thread *thread,
 					    struct binder_work *work)
 {
+	WARN_ON(!list_empty(&thread->waiting_thread_node));
 	binder_enqueue_work_ilocked(work, &thread->todo);
 }
 
@@ -839,6 +840,7 @@ static void
 binder_enqueue_thread_work_ilocked(struct binder_thread *thread,
 				   struct binder_work *work)
 {
+	WARN_ON(!list_empty(&thread->waiting_thread_node));
 	binder_enqueue_work_ilocked(work, &thread->todo);
 	thread->process_todo = true;
 }
@@ -1270,19 +1272,12 @@ static int binder_inc_node_nilocked(struct binder_node *node, int strong,
 		} else
 			node->local_strong_refs++;
 		if (!node->has_strong_ref && target_list) {
+			struct binder_thread *thread = container_of(target_list,
+						    struct binder_thread, todo);
 			binder_dequeue_work_ilocked(&node->work);
-			/*
-			 * Note: this function is the only place where we queue
-			 * directly to a thread->todo without using the
-			 * corresponding binder_enqueue_thread_work() helper
-			 * functions; in this case it's ok to not set the
-			 * process_todo flag, since we know this node work will
-			 * always be followed by other work that starts queue
-			 * processing: in case of synchronous transactions, a
-			 * BR_REPLY or BR_ERROR; in case of oneway
-			 * transactions, a BR_TRANSACTION_COMPLETE.
-			 */
-			binder_enqueue_work_ilocked(&node->work, target_list);
+			BUG_ON(&thread->todo != target_list);
+			binder_enqueue_deferred_thread_work_ilocked(thread,
+								   &node->work);
 		}
 	} else {
 		if (!internal)
@@ -2733,6 +2728,7 @@ static void binder_transaction(struct binder_proc *proc,
 {
 	int ret;
 	struct binder_transaction *t;
+	struct binder_work *w;
 	struct binder_work *tcomplete;
 	binder_size_t *offp, *off_end, *off_start;
 	binder_size_t off_min;
@@ -2874,6 +2870,29 @@ static void binder_transaction(struct binder_proc *proc,
 			goto err_invalid_target_handle;
 		}
 		binder_inner_proc_lock(proc);
+
+		w = list_first_entry_or_null(&thread->todo,
+					     struct binder_work, entry);
+		if (!(tr->flags & TF_ONE_WAY) && w &&
+		    w->type == BINDER_WORK_TRANSACTION) {
+			/*
+			 * Do not allow new outgoing transaction from a
+			 * thread that has a transaction at the head of
+			 * its todo list. Only need to check the head
+			 * because binder_select_thread_ilocked picks a
+			 * thread from proc->waiting_threads to enqueue
+			 * the transaction, and nothing is queued to the
+			 * todo list while the thread is on waiting_threads.
+			 */
+			binder_user_error("%d:%d new transaction not allowed when there is a transaction on thread todo\n",
+					  proc->pid, thread->pid);
+			binder_inner_proc_unlock(proc);
+			return_error = BR_FAILED_REPLY;
+			return_error_param = -EPROTO;
+			return_error_line = __LINE__;
+			goto err_bad_todo_list;
+		}
+
 		if (!(tr->flags & TF_ONE_WAY) && thread->transaction_stack) {
 			struct binder_transaction *tmp;
 
@@ -3256,6 +3275,7 @@ err_alloc_tcomplete_failed:
 	kfree(t);
 	binder_stats_deleted(BINDER_STAT_TRANSACTION);
 err_alloc_t_failed:
+err_bad_todo_list:
 err_bad_call_stack:
 err_empty_call_stack:
 err_dead_binder:
-- 
2.20.1

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

[PATCH AUTOSEL 4.19 188/205] cxgb4: Fix endianness issue in t4_fwcache()

[Sasha Levin]

From: Ganesh Goudar <ganeshgr@chelsio.com>

[ Upstream commit 0dc235afc59a226d951352b0adf4a89b532a9d13 ]

Do not put host-endian 0 or 1 into big endian feild.

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index 5fe5d16dee724..8350c0c9b89d1 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -3889,7 +3889,7 @@ int t4_fwcache(struct adapter *adap, enum fw_params_param_dev_fwcache op)
 	c.param[0].mnem =
 		cpu_to_be32(FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
 			    FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_FWCACHE));
-	c.param[0].val = (__force __be32)op;
+	c.param[0].val = cpu_to_be32(op);
 
 	return t4_wr_mbox(adap, adap->mbox, &c, sizeof(c), NULL);
 }
-- 
2.20.1

[PATCH AUTOSEL 4.19 189/205] arm64: fix for bad_mode() handler to always result in panic

[Sasha Levin]

From: Hari Vyas <hari.vyas@broadcom.com>

[ Upstream commit e4ba15debcfd27f60d43da940a58108783bff2a6 ]

The bad_mode() handler is called if we encounter an uunknown exception,
with the expectation that the subsequent call to panic() will halt the
system. Unfortunately, if the exception calling bad_mode() is taken from
EL0, then the call to die() can end up killing the current user task and
calling schedule() instead of falling through to panic().

Remove the die() call altogether, since we really want to bring down the
machine in this "impossible" case.

Signed-off-by: Hari Vyas <hari.vyas@broadcom.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/kernel/traps.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
index a0099be4311ae..c8dc3a3640e7e 100644
--- a/arch/arm64/kernel/traps.c
+++ b/arch/arm64/kernel/traps.c
@@ -611,7 +611,6 @@ asmlinkage void bad_mode(struct pt_regs *regs, int reason, unsigned int esr)
 		handler[reason], smp_processor_id(), esr,
 		esr_get_class_string(esr));
 
-	die("Oops - bad mode", regs, 0);
 	local_daif_mask();
 	panic("bad mode");
 }
-- 
2.20.1

[PATCH AUTOSEL 4.19 190/205] block, bfq: inject other-queue I/O into seeky idle queues on NCQ flash

[Sasha Levin]

From: Paolo Valente <paolo.valente@linaro.org>

[ Upstream commit d0edc2473be9d70f999282e1ca7863ad6ae704dc ]

The Achilles' heel of BFQ is its failing to reach a high throughput
with sync random I/O on flash storage with internal queueing, in case
the processes doing I/O have differentiated weights.

The cause of this failure is as follows. If at least two processes do
sync I/O, and have a different weight from each other, then BFQ plugs
I/O dispatching every time one of these processes, while it is being
served, remains temporarily without pending I/O requests. This
plugging is necessary to guarantee that every process enjoys a
bandwidth proportional to its weight; but it empties the internal
queue(s) of the drive. And this kills throughput with random I/O. So,
if some processes have differentiated weights and do both sync and
random I/O, the end result is a throughput collapse.

This commit tries to counter this problem by injecting the service of
other processes, in a controlled way, while the process in service
happens to have no I/O. This injection is performed only if the medium
is non rotational and performs internal queueing, and the process in
service does random I/O (service injection might be beneficial for
sequential I/O too, we'll work on that).

As an example of the benefits of this commit, on a PLEXTOR PX-256M5S
SSD, and with five processes having differentiated weights and doing
sync random 4KB I/O, this commit makes the throughput with bfq grow by
400%, from 25 to 100MB/s. This higher throughput is 10MB/s lower than
that reached with none. As some less random I/O is added to the mix,
the throughput becomes equal to or higher than that with none.

This commit is a very first attempt to recover throughput without
losing control, and certainly has many limitations. One is, e.g., that
the processes whose service is injected are not chosen so as to
distribute the extra bandwidth they receive in accordance to their
weights. Thus there might be loss of weighted fairness in some
cases. Anyway, this loss concerns extra service, which would not have
been received at all without this commit. Other limitations and issues
will probably show up with usage.

Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/bfq-iosched.c | 68 +++++++++++++++++++++++++++++++++++++++++----
 block/bfq-iosched.h | 26 +++++++++++++++++
 2 files changed, 88 insertions(+), 6 deletions(-)

diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
index d8d2ac294b0c0..35ddaa820737c 100644
--- a/block/bfq-iosched.c
+++ b/block/bfq-iosched.c
@@ -3195,6 +3195,13 @@ static unsigned long bfq_bfqq_softrt_next_start(struct bfq_data *bfqd,
 		    jiffies + nsecs_to_jiffies(bfqq->bfqd->bfq_slice_idle) + 4);
 }
 
+static bool bfq_bfqq_injectable(struct bfq_queue *bfqq)
+{
+	return BFQQ_SEEKY(bfqq) && bfqq->wr_coeff == 1 &&
+		blk_queue_nonrot(bfqq->bfqd->queue) &&
+		bfqq->bfqd->hw_tag;
+}
+
 /**
  * bfq_bfqq_expire - expire a queue.
  * @bfqd: device owning the queue.
@@ -3304,6 +3311,8 @@ void bfq_bfqq_expire(struct bfq_data *bfqd,
 	if (ref == 1) /* bfqq is gone, no more actions on it */
 		return;
 
+	bfqq->injected_service = 0;
+
 	/* mark bfqq as waiting a request only if a bic still points to it */
 	if (!bfq_bfqq_busy(bfqq) &&
 	    reason != BFQQE_BUDGET_TIMEOUT &&
@@ -3642,6 +3651,30 @@ static bool bfq_bfqq_must_idle(struct bfq_queue *bfqq)
 	return RB_EMPTY_ROOT(&bfqq->sort_list) && bfq_better_to_idle(bfqq);
 }
 
+static struct bfq_queue *bfq_choose_bfqq_for_injection(struct bfq_data *bfqd)
+{
+	struct bfq_queue *bfqq;
+
+	/*
+	 * A linear search; but, with a high probability, very few
+	 * steps are needed to find a candidate queue, i.e., a queue
+	 * with enough budget left for its next request. In fact:
+	 * - BFQ dynamically updates the budget of every queue so as
+	 *   to accommodate the expected backlog of the queue;
+	 * - if a queue gets all its requests dispatched as injected
+	 *   service, then the queue is removed from the active list
+	 *   (and re-added only if it gets new requests, but with
+	 *   enough budget for its new backlog).
+	 */
+	list_for_each_entry(bfqq, &bfqd->active_list, bfqq_list)
+		if (!RB_EMPTY_ROOT(&bfqq->sort_list) &&
+		    bfq_serv_to_charge(bfqq->next_rq, bfqq) <=
+		    bfq_bfqq_budget_left(bfqq))
+			return bfqq;
+
+	return NULL;
+}
+
 /*
  * Select a queue for service.  If we have a current queue in service,
  * check whether to continue servicing it, or retrieve and set a new one.
@@ -3723,10 +3756,19 @@ check_queue:
 	 * No requests pending. However, if the in-service queue is idling
 	 * for a new request, or has requests waiting for a completion and
 	 * may idle after their completion, then keep it anyway.
+	 *
+	 * Yet, to boost throughput, inject service from other queues if
+	 * possible.
 	 */
 	if (bfq_bfqq_wait_request(bfqq) ||
 	    (bfqq->dispatched != 0 && bfq_better_to_idle(bfqq))) {
-		bfqq = NULL;
+		if (bfq_bfqq_injectable(bfqq) &&
+		    bfqq->injected_service * bfqq->inject_coeff <
+		    bfqq->entity.service * 10)
+			bfqq = bfq_choose_bfqq_for_injection(bfqd);
+		else
+			bfqq = NULL;
+
 		goto keep_queue;
 	}
 
@@ -3816,6 +3858,14 @@ static struct request *bfq_dispatch_rq_from_bfqq(struct bfq_data *bfqd,
 
 	bfq_dispatch_remove(bfqd->queue, rq);
 
+	if (bfqq != bfqd->in_service_queue) {
+		if (likely(bfqd->in_service_queue))
+			bfqd->in_service_queue->injected_service +=
+				bfq_serv_to_charge(rq, bfqq);
+
+		goto return_rq;
+	}
+
 	/*
 	 * If weight raising has to terminate for bfqq, then next
 	 * function causes an immediate update of bfqq's weight,
@@ -3834,13 +3884,12 @@ static struct request *bfq_dispatch_rq_from_bfqq(struct bfq_data *bfqd,
 	 * belongs to CLASS_IDLE and other queues are waiting for
 	 * service.
 	 */
-	if (bfqd->busy_queues > 1 && bfq_class_idle(bfqq))
-		goto expire;
-
-	return rq;
+	if (!(bfqd->busy_queues > 1 && bfq_class_idle(bfqq)))
+		goto return_rq;
 
-expire:
 	bfq_bfqq_expire(bfqd, bfqq, false, BFQQE_BUDGET_EXHAUSTED);
+
+return_rq:
 	return rq;
 }
 
@@ -4246,6 +4295,13 @@ static void bfq_init_bfqq(struct bfq_data *bfqd, struct bfq_queue *bfqq,
 			bfq_mark_bfqq_has_short_ttime(bfqq);
 		bfq_mark_bfqq_sync(bfqq);
 		bfq_mark_bfqq_just_created(bfqq);
+		/*
+		 * Aggressively inject a lot of service: up to 90%.
+		 * This coefficient remains constant during bfqq life,
+		 * but this behavior might be changed, after enough
+		 * testing and tuning.
+		 */
+		bfqq->inject_coeff = 1;
 	} else
 		bfq_clear_bfqq_sync(bfqq);
 
diff --git a/block/bfq-iosched.h b/block/bfq-iosched.h
index d5e9e60cb1a5f..a41e9884f2dd2 100644
--- a/block/bfq-iosched.h
+++ b/block/bfq-iosched.h
@@ -351,6 +351,32 @@ struct bfq_queue {
 	unsigned long split_time; /* time of last split */
 
 	unsigned long first_IO_time; /* time of first I/O for this queue */
+
+	/* max service rate measured so far */
+	u32 max_service_rate;
+	/*
+	 * Ratio between the service received by bfqq while it is in
+	 * service, and the cumulative service (of requests of other
+	 * queues) that may be injected while bfqq is empty but still
+	 * in service. To increase precision, the coefficient is
+	 * measured in tenths of unit. Here are some example of (1)
+	 * ratios, (2) resulting percentages of service injected
+	 * w.r.t. to the total service dispatched while bfqq is in
+	 * service, and (3) corresponding values of the coefficient:
+	 * 1 (50%) -> 10
+	 * 2 (33%) -> 20
+	 * 10 (9%) -> 100
+	 * 9.9 (9%) -> 99
+	 * 1.5 (40%) -> 15
+	 * 0.5 (66%) -> 5
+	 * 0.1 (90%) -> 1
+	 *
+	 * So, if the coefficient is lower than 10, then
+	 * injected service is more than bfqq service.
+	 */
+	unsigned int inject_coeff;
+	/* amount of service injected in current service slot */
+	unsigned int injected_service;
 };
 
 /**
-- 
2.20.1

[PATCH AUTOSEL 4.19 191/205] blok, bfq: do not plug I/O if all queues are weight-raised

[Sasha Levin]

From: Paolo Valente <paolo.valente@linaro.org>

[ Upstream commit c8765de0adfcaaf4ffb2d951e07444f00ffa9453 ]

To reduce latency for interactive and soft real-time applications, bfq
privileges the bfq_queues containing the I/O of these
applications. These privileged queues, referred-to as weight-raised
queues, get a much higher share of the device throughput
w.r.t. non-privileged queues. To preserve this higher share, the I/O
of any non-weight-raised queue must be plugged whenever a sync
weight-raised queue, while being served, remains temporarily empty. To
attain this goal, bfq simply plugs any I/O (from any queue), if a sync
weight-raised queue remains empty while in service.

Unfortunately, this plugging typically lowers throughput with random
I/O, on devices with internal queueing (because it reduces the filling
level of the internal queues of the device).

This commit addresses this issue by restricting the cases where
plugging is performed: if a sync weight-raised queue remains empty
while in service, then I/O plugging is performed only if some of the
active bfq_queues are *not* weight-raised (which is actually the only
circumstance where plugging is needed to preserve the higher share of
the throughput of weight-raised queues). This restriction proved able
to boost throughput in really many use cases needing only maximum
throughput.

Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 block/bfq-iosched.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
index 35ddaa820737c..66b1ebc21ce4f 100644
--- a/block/bfq-iosched.c
+++ b/block/bfq-iosched.c
@@ -3593,7 +3593,12 @@ static bool bfq_better_to_idle(struct bfq_queue *bfqq)
 	 * whether bfqq is being weight-raised, because
 	 * bfq_symmetric_scenario() does not take into account also
 	 * weight-raised queues (see comments on
-	 * bfq_weights_tree_add()).
+	 * bfq_weights_tree_add()). In particular, if bfqq is being
+	 * weight-raised, it is important to idle only if there are
+	 * other, non-weight-raised queues that may steal throughput
+	 * to bfqq. Actually, we should be even more precise, and
+	 * differentiate between interactive weight raising and
+	 * soft real-time weight raising.
 	 *
 	 * As a side note, it is worth considering that the above
 	 * device-idling countermeasures may however fail in the
@@ -3605,7 +3610,8 @@ static bool bfq_better_to_idle(struct bfq_queue *bfqq)
 	 * to let requests be served in the desired order until all
 	 * the requests already queued in the device have been served.
 	 */
-	asymmetric_scenario = bfqq->wr_coeff > 1 ||
+	asymmetric_scenario = (bfqq->wr_coeff > 1 &&
+			       bfqd->wr_busy_queues < bfqd->busy_queues) ||
 		!bfq_symmetric_scenario(bfqd);
 
 	/*
-- 
2.20.1

[PATCH AUTOSEL 4.19 192/205] arm64: dts: meson: Fix erroneous SPI bus warnings

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit 68ecb5c1920c5b98b1e717fd2349fba2ee5d4031 ]

dtc has new checks for SPI buses. The meson dts files have a node named
spi' which causes false positive warnings. As the node is a pinctrl child
node, change the node name to be 'spi-pins' to fix the warnings.

arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dtb: Warning (spi_bus_bridge): /soc/periphs@c8834000/pinctrl@4b0/spi: incorrect #address-cells for SPI bus

Cc: Carlo Caione <carlo@caione.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: linux-amlogic@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 2 +-
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi  | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 98cbba6809caa..1ade7e486828c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -390,7 +390,7 @@
 			};
 		};
 
-		spi_pins: spi {
+		spi_pins: spi-pins {
 			mux {
 				groups = "spi_miso",
 					"spi_mosi",
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index c87a80e9bcc6a..8f0bb3c44bd6d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -337,7 +337,7 @@
 			};
 		};
 
-		spi_pins: spi {
+		spi_pins: spi-pins {
 			mux {
 				groups = "spi_miso",
 					"spi_mosi",
-- 
2.20.1

[PATCH AUTOSEL 4.19 192/205] arm64: dts: meson: Fix erroneous SPI bus warnings

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit 68ecb5c1920c5b98b1e717fd2349fba2ee5d4031 ]

dtc has new checks for SPI buses. The meson dts files have a node named
spi' which causes false positive warnings. As the node is a pinctrl child
node, change the node name to be 'spi-pins' to fix the warnings.

arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dtb: Warning (spi_bus_bridge): /soc/periphs@c8834000/pinctrl@4b0/spi: incorrect #address-cells for SPI bus

Cc: Carlo Caione <carlo@caione.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: linux-amlogic@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 2 +-
 arch/arm64/boot/dts/amlogic/meson-gxl.dtsi  | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 98cbba6809caa..1ade7e486828c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -390,7 +390,7 @@
 			};
 		};
 
-		spi_pins: spi {
+		spi_pins: spi-pins {
 			mux {
 				groups = "spi_miso",
 					"spi_mosi",
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index c87a80e9bcc6a..8f0bb3c44bd6d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -337,7 +337,7 @@
 			};
 		};
 
-		spi_pins: spi {
+		spi_pins: spi-pins {
 			mux {
 				groups = "spi_miso",
 					"spi_mosi",
-- 
2.20.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH AUTOSEL 4.19 193/205] power: supply: ab8500_fg: silence uninitialized variable warnings

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 54baff8d4e5dce2cef61953b1dc22079cda1ddb1 ]

If kstrtoul() fails then we print "charge_full" when it's uninitialized.
The debug printk doesn't add anything so I deleted it and cleaned these
two functions up a bit.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/power/supply/ab8500_fg.c | 31 ++++++++++++-------------------
 1 file changed, 12 insertions(+), 19 deletions(-)

diff --git a/drivers/power/supply/ab8500_fg.c b/drivers/power/supply/ab8500_fg.c
index 02356f9b5f22a..8bb89c697c1eb 100644
--- a/drivers/power/supply/ab8500_fg.c
+++ b/drivers/power/supply/ab8500_fg.c
@@ -2433,17 +2433,14 @@ static ssize_t charge_full_store(struct ab8500_fg *di, const char *buf,
 				 size_t count)
 {
 	unsigned long charge_full;
-	ssize_t ret;
+	int ret;
 
 	ret = kstrtoul(buf, 10, &charge_full);
+	if (ret)
+		return ret;
 
-	dev_dbg(di->dev, "Ret %zd charge_full %lu", ret, charge_full);
-
-	if (!ret) {
-		di->bat_cap.max_mah = (int) charge_full;
-		ret = count;
-	}
-	return ret;
+	di->bat_cap.max_mah = (int) charge_full;
+	return count;
 }
 
 static ssize_t charge_now_show(struct ab8500_fg *di, char *buf)
@@ -2455,20 +2452,16 @@ static ssize_t charge_now_store(struct ab8500_fg *di, const char *buf,
 				 size_t count)
 {
 	unsigned long charge_now;
-	ssize_t ret;
+	int ret;
 
 	ret = kstrtoul(buf, 10, &charge_now);
+	if (ret)
+		return ret;
 
-	dev_dbg(di->dev, "Ret %zd charge_now %lu was %d",
-		ret, charge_now, di->bat_cap.prev_mah);
-
-	if (!ret) {
-		di->bat_cap.user_mah = (int) charge_now;
-		di->flags.user_cap = true;
-		ret = count;
-		queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
-	}
-	return ret;
+	di->bat_cap.user_mah = (int) charge_now;
+	di->flags.user_cap = true;
+	queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
+	return count;
 }
 
 static struct ab8500_fg_sysfs_entry charge_full_attr =
-- 
2.20.1

[PATCH AUTOSEL 4.19 194/205] power: reset: at91-poweroff: do not procede if at91_shdwc is allocated

[Sasha Levin]

From: Claudiu Beznea <claudiu.beznea@microchip.com>

[ Upstream commit 9f1e44774be578fb92776add95f1fcaf8284d692 ]

There should be only one instance of struct shdwc in the system. This is
referenced through at91_shdwc. Return in probe if at91_shdwc is already
allocated.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/power/reset/at91-sama5d2_shdwc.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/power/reset/at91-sama5d2_shdwc.c b/drivers/power/reset/at91-sama5d2_shdwc.c
index 0206cce328b3d..d9493e893d64e 100644
--- a/drivers/power/reset/at91-sama5d2_shdwc.c
+++ b/drivers/power/reset/at91-sama5d2_shdwc.c
@@ -246,6 +246,9 @@ static int __init at91_shdwc_probe(struct platform_device *pdev)
 	if (!pdev->dev.of_node)
 		return -ENODEV;
 
+	if (at91_shdwc)
+		return -EBUSY;
+
 	at91_shdwc = devm_kzalloc(&pdev->dev, sizeof(*at91_shdwc), GFP_KERNEL);
 	if (!at91_shdwc)
 		return -ENOMEM;
-- 
2.20.1

[PATCH AUTOSEL 4.19 195/205] power: supply: max8998-charger: Fix platform data retrieval

[Sasha Levin]

From: Tomasz Figa <tomasz.figa@gmail.com>

[ Upstream commit cb90a2c6f77fe9b43d1e3f759bb2f13fe7fa1811 ]

Since the max8998 MFD driver supports instantiation by DT, platform data
retrieval is handled in MFD probe and cell drivers should get use
the pdata field of max8998_dev struct to obtain them.

Fixes: ee999fb3f17f ("mfd: max8998: Add support for Device Tree")
Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/power/supply/max8998_charger.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/power/supply/max8998_charger.c b/drivers/power/supply/max8998_charger.c
index cad7d1a8feec7..aa65e6c36c55e 100644
--- a/drivers/power/supply/max8998_charger.c
+++ b/drivers/power/supply/max8998_charger.c
@@ -86,7 +86,7 @@ static const struct power_supply_desc max8998_battery_desc = {
 static int max8998_battery_probe(struct platform_device *pdev)
 {
 	struct max8998_dev *iodev = dev_get_drvdata(pdev->dev.parent);
-	struct max8998_platform_data *pdata = dev_get_platdata(iodev->dev);
+	struct max8998_platform_data *pdata = iodev->pdata;
 	struct power_supply_config psy_cfg = {};
 	struct max8998_battery_data *max8998;
 	struct i2c_client *i2c;
-- 
2.20.1

[PATCH AUTOSEL 4.19 196/205] component: fix loop condition to call unbind() if bind() fails

[Sasha Levin]

From: Banajit Goswami <bgoswami@codeaurora.org>

[ Upstream commit bdae566d5d9733b6e32b378668b84eadf28a94d4 ]

During component_bind_all(), if bind() fails for any
particular component associated with a master, unbind()
should be called for all previous components in that
master's match array, whose bind() might have completed
successfully. As per the current logic, if bind() fails
for the component at position 'n' in the master's match
array, it would start calling unbind() from component in
'n'th position itself and work backwards, and will always
skip calling unbind() for component in 0th position in the
master's match array.
Fix this by updating the loop condition, and the logic to
refer to the components in master's match array, so that
unbind() is called for all components starting from 'n-1'st
position in the array, until (and including) component in
0th position.

Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/base/component.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/base/component.c b/drivers/base/component.c
index 8946dfee4768e..e8d676fad0c95 100644
--- a/drivers/base/component.c
+++ b/drivers/base/component.c
@@ -536,9 +536,9 @@ int component_bind_all(struct device *master_dev, void *data)
 		}
 
 	if (ret != 0) {
-		for (; i--; )
-			if (!master->match->compare[i].duplicate) {
-				c = master->match->compare[i].component;
+		for (; i > 0; i--)
+			if (!master->match->compare[i - 1].duplicate) {
+				c = master->match->compare[i - 1].component;
 				component_unbind(c, master, data);
 			}
 	}
-- 
2.20.1

[PATCH AUTOSEL 4.19 197/205] kernfs: Fix range checks in kernfs_get_target_path

[Sasha Levin]

From: Bernd Edlinger <bernd.edlinger@hotmail.de>

[ Upstream commit a75e78f21f9ad4b810868c89dbbabcc3931591ca ]

The terminating NUL byte is only there because the buffer is
allocated with kzalloc(PAGE_SIZE, GFP_KERNEL), but since the
range-check is off-by-one, and PAGE_SIZE==PATH_MAX, the
returned string may not be zero-terminated if it is exactly
PATH_MAX characters long.  Furthermore also the initial loop
may theoretically exceed PATH_MAX and cause a fault.

Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/kernfs/symlink.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/fs/kernfs/symlink.c b/fs/kernfs/symlink.c
index 305b220af45d3..162f43b80c84c 100644
--- a/fs/kernfs/symlink.c
+++ b/fs/kernfs/symlink.c
@@ -72,6 +72,9 @@ static int kernfs_get_target_path(struct kernfs_node *parent,
 		if (base == kn)
 			break;
 
+		if ((s - path) + 3 >= PATH_MAX)
+			return -ENAMETOOLONG;
+
 		strcpy(s, "../");
 		s += 3;
 		base = base->parent;
@@ -88,7 +91,7 @@ static int kernfs_get_target_path(struct kernfs_node *parent,
 	if (len < 2)
 		return -EINVAL;
 	len--;
-	if ((s - path) + len > PATH_MAX)
+	if ((s - path) + len >= PATH_MAX)
 		return -ENAMETOOLONG;
 
 	/* reverse fillup of target string from target to base */
-- 
2.20.1

[PATCH AUTOSEL 4.19 198/205] ip_gre: fix parsing gre header in ipgre_err

[Sasha Levin]

From: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>

[ Upstream commit b0350d51f001e6edc13ee4f253b98b50b05dd401 ]

gre_parse_header stops parsing when csum_err is encountered, which means
tpi->key is undefined and ip_tunnel_lookup will return NULL improperly.

This patch introduce a NULL pointer as csum_err parameter. Even when
csum_err is encountered, it won't return error and continue parsing gre
header as expected.

Fixes: 9f57c67c379d ("gre: Remove support for sharing GRE protocol hook.")
Reported-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv4/gre_demux.c | 7 ++++---
 net/ipv4/ip_gre.c    | 9 +++------
 2 files changed, 7 insertions(+), 9 deletions(-)

diff --git a/net/ipv4/gre_demux.c b/net/ipv4/gre_demux.c
index f21ea6125fc2d..511b32ea25331 100644
--- a/net/ipv4/gre_demux.c
+++ b/net/ipv4/gre_demux.c
@@ -87,13 +87,14 @@ int gre_parse_header(struct sk_buff *skb, struct tnl_ptk_info *tpi,
 
 	options = (__be32 *)(greh + 1);
 	if (greh->flags & GRE_CSUM) {
-		if (skb_checksum_simple_validate(skb)) {
+		if (!skb_checksum_simple_validate(skb)) {
+			skb_checksum_try_convert(skb, IPPROTO_GRE, 0,
+						 null_compute_pseudo);
+		} else if (csum_err) {
 			*csum_err = true;
 			return -EINVAL;
 		}
 
-		skb_checksum_try_convert(skb, IPPROTO_GRE, 0,
-					 null_compute_pseudo);
 		options++;
 	}
 
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index 0b87558f265eb..9d5db4e40b2a9 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -232,13 +232,10 @@ static void gre_err(struct sk_buff *skb, u32 info)
 	const int type = icmp_hdr(skb)->type;
 	const int code = icmp_hdr(skb)->code;
 	struct tnl_ptk_info tpi;
-	bool csum_err = false;
 
-	if (gre_parse_header(skb, &tpi, &csum_err, htons(ETH_P_IP),
-			     iph->ihl * 4) < 0) {
-		if (!csum_err)		/* ignore csum errors. */
-			return;
-	}
+	if (gre_parse_header(skb, &tpi, NULL, htons(ETH_P_IP),
+			     iph->ihl * 4) < 0)
+		return;
 
 	if (type == ICMP_DEST_UNREACH && code == ICMP_FRAG_NEEDED) {
 		ipv4_update_pmtu(skb, dev_net(skb->dev), info,
-- 
2.20.1

[PATCH AUTOSEL 4.19 199/205] scsi: ufshcd: Fix NULL pointer dereference for in ufshcd_init

[Sasha Levin]

From: Vivek Gautam <vivek.gautam@codeaurora.org>

[ Upstream commit eebcc19646489b68399ce7b35d9c38eb9f4ec40f ]

Error paths in ufshcd_init() ufshcd_hba_exit() killed clk_scaling workqueue
when the workqueue is actually created quite late in ufshcd_init().  So, we
end up getting NULL pointer dereference in such error paths.  Fix this by
moving clk_scaling initialization and kill codes to two separate methods, and
call them at required places.

Fixes: 401f1e4490ee ("scsi: ufs: don't suspend clock scaling during clock
gating")

Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Subhash Jadavani <subhashj@codeaurora.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Evan Green <evgreen@chromium.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/ufs/ufshcd.c | 53 +++++++++++++++++++++++++--------------
 1 file changed, 34 insertions(+), 19 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 4aaba3e030554..8bce755e0f5bc 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -1772,6 +1772,34 @@ out:
 	return count;
 }
 
+static void ufshcd_init_clk_scaling(struct ufs_hba *hba)
+{
+	char wq_name[sizeof("ufs_clkscaling_00")];
+
+	if (!ufshcd_is_clkscaling_supported(hba))
+		return;
+
+	INIT_WORK(&hba->clk_scaling.suspend_work,
+		  ufshcd_clk_scaling_suspend_work);
+	INIT_WORK(&hba->clk_scaling.resume_work,
+		  ufshcd_clk_scaling_resume_work);
+
+	snprintf(wq_name, sizeof(wq_name), "ufs_clkscaling_%d",
+		 hba->host->host_no);
+	hba->clk_scaling.workq = create_singlethread_workqueue(wq_name);
+
+	ufshcd_clkscaling_init_sysfs(hba);
+}
+
+static void ufshcd_exit_clk_scaling(struct ufs_hba *hba)
+{
+	if (!ufshcd_is_clkscaling_supported(hba))
+		return;
+
+	destroy_workqueue(hba->clk_scaling.workq);
+	ufshcd_devfreq_remove(hba);
+}
+
 static void ufshcd_init_clk_gating(struct ufs_hba *hba)
 {
 	char wq_name[sizeof("ufs_clk_gating_00")];
@@ -6676,6 +6704,7 @@ out:
 	 */
 	if (ret && !ufshcd_eh_in_progress(hba) && !hba->pm_op_in_progress) {
 		pm_runtime_put_sync(hba->dev);
+		ufshcd_exit_clk_scaling(hba);
 		ufshcd_hba_exit(hba);
 	}
 
@@ -7223,12 +7252,9 @@ static void ufshcd_hba_exit(struct ufs_hba *hba)
 		ufshcd_variant_hba_exit(hba);
 		ufshcd_setup_vreg(hba, false);
 		ufshcd_suspend_clkscaling(hba);
-		if (ufshcd_is_clkscaling_supported(hba)) {
+		if (ufshcd_is_clkscaling_supported(hba))
 			if (hba->devfreq)
 				ufshcd_suspend_clkscaling(hba);
-			destroy_workqueue(hba->clk_scaling.workq);
-			ufshcd_devfreq_remove(hba);
-		}
 		ufshcd_setup_clocks(hba, false);
 		ufshcd_setup_hba_vreg(hba, false);
 		hba->is_powered = false;
@@ -7908,6 +7934,7 @@ void ufshcd_remove(struct ufs_hba *hba)
 	ufshcd_disable_intr(hba, hba->intr_mask);
 	ufshcd_hba_stop(hba, true);
 
+	ufshcd_exit_clk_scaling(hba);
 	ufshcd_exit_clk_gating(hba);
 	if (ufshcd_is_clkscaling_supported(hba))
 		device_remove_file(hba->dev, &hba->clk_scaling.enable_attr);
@@ -8079,6 +8106,8 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
 
 	ufshcd_init_clk_gating(hba);
 
+	ufshcd_init_clk_scaling(hba);
+
 	/*
 	 * In order to avoid any spurious interrupt immediately after
 	 * registering UFS controller interrupt handler, clear any pending UFS
@@ -8117,21 +8146,6 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
 		goto out_remove_scsi_host;
 	}
 
-	if (ufshcd_is_clkscaling_supported(hba)) {
-		char wq_name[sizeof("ufs_clkscaling_00")];
-
-		INIT_WORK(&hba->clk_scaling.suspend_work,
-			  ufshcd_clk_scaling_suspend_work);
-		INIT_WORK(&hba->clk_scaling.resume_work,
-			  ufshcd_clk_scaling_resume_work);
-
-		snprintf(wq_name, sizeof(wq_name), "ufs_clkscaling_%d",
-			 host->host_no);
-		hba->clk_scaling.workq = create_singlethread_workqueue(wq_name);
-
-		ufshcd_clkscaling_init_sysfs(hba);
-	}
-
 	/*
 	 * Set the default power management level for runtime and system PM.
 	 * Default power saving mode is to keep UFS link in Hibern8 state
@@ -8169,6 +8183,7 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
 out_remove_scsi_host:
 	scsi_remove_host(hba->host);
 exit_gating:
+	ufshcd_exit_clk_scaling(hba);
 	ufshcd_exit_clk_gating(hba);
 out_disable:
 	hba->is_irq_enabled = false;
-- 
2.20.1

[PATCH AUTOSEL 4.19 200/205] ARM: dts: rockchip: Fix erroneous SPI bus dtc warnings on rk3036

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit 131c3eb428ccd5f0c784b9edb4f72ec296a045d2 ]

dtc has new checks for SPI buses. The rk3036 dts file has a node named
spi' which causes false positive warnings. As the node is a pinctrl child
node, change the node name to be 'spi-pins' to fix the warnings.

arch/arm/boot/dts/rk3036-evb.dtb: Warning (spi_bus_bridge): /pinctrl/spi: incorrect #address-cells for SPI bus
arch/arm/boot/dts/rk3036-kylin.dtb: Warning (spi_bus_bridge): /pinctrl/spi: incorrect #address-cells for SPI bus
arch/arm/boot/dts/rk3036-evb.dtb: Warning (spi_bus_bridge): /pinctrl/spi: incorrect #size-cells for SPI bus
arch/arm/boot/dts/rk3036-kylin.dtb: Warning (spi_bus_bridge): /pinctrl/spi: incorrect #size-cells for SPI bus

Cc: Heiko Stuebner <heiko@sntech.de>
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/rk3036.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index 67f57200d9a06..d560fc4051c5f 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -733,7 +733,7 @@
 			/* no rts / cts for uart2 */
 		};
 
-		spi {
+		spi-pins {
 			spi_txd:spi-txd {
 				rockchip,pins = <1 29 RK_FUNC_3 &pcfg_pull_default>;
 			};
-- 
2.20.1

[PATCH AUTOSEL 4.19 200/205] ARM: dts: rockchip: Fix erroneous SPI bus dtc warnings on rk3036

[Sasha Levin]

From: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

[ Upstream commit 131c3eb428ccd5f0c784b9edb4f72ec296a045d2 ]

dtc has new checks for SPI buses. The rk3036 dts file has a node named
spi' which causes false positive warnings. As the node is a pinctrl child
node, change the node name to be 'spi-pins' to fix the warnings.

arch/arm/boot/dts/rk3036-evb.dtb: Warning (spi_bus_bridge): /pinctrl/spi: incorrect #address-cells for SPI bus
arch/arm/boot/dts/rk3036-kylin.dtb: Warning (spi_bus_bridge): /pinctrl/spi: incorrect #address-cells for SPI bus
arch/arm/boot/dts/rk3036-evb.dtb: Warning (spi_bus_bridge): /pinctrl/spi: incorrect #size-cells for SPI bus
arch/arm/boot/dts/rk3036-kylin.dtb: Warning (spi_bus_bridge): /pinctrl/spi: incorrect #size-cells for SPI bus

Cc: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Signed-off-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
Signed-off-by: Sasha Levin <sashal-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 arch/arm/boot/dts/rk3036.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index 67f57200d9a06..d560fc4051c5f 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -733,7 +733,7 @@
 			/* no rts / cts for uart2 */
 		};
 
-		spi {
+		spi-pins {
 			spi_txd:spi-txd {
 				rockchip,pins = <1 29 RK_FUNC_3 &pcfg_pull_default>;
 			};
-- 
2.20.1

[PATCH AUTOSEL 4.19 201/205] arm64: dts: rockchip: Fix I2C bus unit-address error on rk3399-puma-haikou

[Sasha Levin]

From: Rob Herring <robh@kernel.org>

[ Upstream commit 501500e65fa96f899230d66153fefd780f08dd34 ]

dtc has new checks for I2C buses. Fix the warnings in unit-addresses.

arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dtb: Warning (i2c_bus_reg): /i2c@ff3d0000/codec@0a: I2C bus unit address format error, expected "a"

Cc: Heiko Stuebner <heiko@sntech.de>
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
index 8ce4a79d9360f..1e6a71066c163 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
@@ -131,7 +131,7 @@
 	status = "okay";
 	clock-frequency = <400000>;
 
-	sgtl5000: codec@0a {
+	sgtl5000: codec@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
 		clocks = <&sgtl5000_clk>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 201/205] arm64: dts: rockchip: Fix I2C bus unit-address error on rk3399-puma-haikou

[Sasha Levin]

From: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

[ Upstream commit 501500e65fa96f899230d66153fefd780f08dd34 ]

dtc has new checks for I2C buses. Fix the warnings in unit-addresses.

arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dtb: Warning (i2c_bus_reg): /i2c@ff3d0000/codec@0a: I2C bus unit address format error, expected "a"

Cc: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Signed-off-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
Signed-off-by: Sasha Levin <sashal-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
index 8ce4a79d9360f..1e6a71066c163 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
@@ -131,7 +131,7 @@
 	status = "okay";
 	clock-frequency = <400000>;
 
-	sgtl5000: codec@0a {
+	sgtl5000: codec@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
 		clocks = <&sgtl5000_clk>;
-- 
2.20.1

[PATCH AUTOSEL 4.19 202/205] ACPI / LPSS: Exclude I2C busses shared with PUNIT from pmc_atom_d3_mask

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 86b62e5cd8965d3056f9e9ccdec51631c37add81 ]

lpss_iosf_enter_d3_state() checks if all hw-blocks using the DMA
controllers are in d3 before powering down the DMA controllers.

But on devices, where the I2C bus connected to the PMIC is shared by
the PUNIT, the controller for that bus will never reach d3 since it has
an effectively empty _PS3 method. Instead it appears to automatically
power-down during S0i3 and we never see it as being in d3.

This causes the DMA controllers to never be powered-down on these devices,
causing them to never reach S0i3. This commit uses the ACPI _SEM method
to detect if an I2C bus is shared with the PUNIT and if it is, it removes
it from the mask of devices which lpss_iosf_enter_d3_state() checks for.

This fixes these devices never reaching any S0ix states.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/acpi/acpi_lpss.c | 22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
index c651e206d7960..7eda27d43b482 100644
--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c
@@ -99,6 +99,9 @@ struct lpss_private_data {
 	u32 prv_reg_ctx[LPSS_PRV_REG_COUNT];
 };
 
+/* Devices which need to be in D3 before lpss_iosf_enter_d3_state() proceeds */
+static u32 pmc_atom_d3_mask = 0xfe000ffe;
+
 /* LPSS run time quirks */
 static unsigned int lpss_quirks;
 
@@ -175,6 +178,21 @@ static void byt_pwm_setup(struct lpss_private_data *pdata)
 
 static void byt_i2c_setup(struct lpss_private_data *pdata)
 {
+	const char *uid_str = acpi_device_uid(pdata->adev);
+	acpi_handle handle = pdata->adev->handle;
+	unsigned long long shared_host = 0;
+	acpi_status status;
+	long uid = 0;
+
+	/* Expected to always be true, but better safe then sorry */
+	if (uid_str)
+		uid = simple_strtol(uid_str, NULL, 10);
+
+	/* Detect I2C bus shared with PUNIT and ignore its d3 status */
+	status = acpi_evaluate_integer(handle, "_SEM", NULL, &shared_host);
+	if (ACPI_SUCCESS(status) && shared_host && uid)
+		pmc_atom_d3_mask &= ~(BIT_LPSS2_F1_I2C1 << (uid - 1));
+
 	lpss_deassert_reset(pdata);
 
 	if (readl(pdata->mmio_base + pdata->dev_desc->prv_offset))
@@ -894,7 +912,7 @@ static void lpss_iosf_enter_d3_state(void)
 	 * Here we read the values related to LPSS power island, i.e. LPSS
 	 * devices, excluding both LPSS DMA controllers, along with SCC domain.
 	 */
-	u32 func_dis, d3_sts_0, pmc_status, pmc_mask = 0xfe000ffe;
+	u32 func_dis, d3_sts_0, pmc_status;
 	int ret;
 
 	ret = pmc_atom_read(PMC_FUNC_DIS, &func_dis);
@@ -912,7 +930,7 @@ static void lpss_iosf_enter_d3_state(void)
 	 * Shutdown both LPSS DMA controllers if and only if all other devices
 	 * are already in D3hot.
 	 */
-	pmc_status = (~(d3_sts_0 | func_dis)) & pmc_mask;
+	pmc_status = (~(d3_sts_0 | func_dis)) & pmc_atom_d3_mask;
 	if (pmc_status)
 		goto exit;
 
-- 
2.20.1

[PATCH AUTOSEL 4.19 203/205] netfilter: nf_tables: avoid BUG_ON usage

[Sasha Levin]

From: Florian Westphal <fw@strlen.de>

[ Upstream commit fa5950e498e7face21a1761f327e6c1152f778c3 ]

None of these spots really needs to crash the kernel.
In one two cases we can jsut report error to userspace, in the other
cases we can just use WARN_ON (and leak memory instead).

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_tables_api.c | 9 ++++++---
 net/netfilter/nft_cmp.c       | 6 ++++--
 net/netfilter/nft_reject.c    | 6 ++++--
 3 files changed, 14 insertions(+), 7 deletions(-)

diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c
index 24fddf0322790..289d079008ee8 100644
--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -1031,7 +1031,8 @@ static int nf_tables_deltable(struct net *net, struct sock *nlsk,
 
 static void nf_tables_table_destroy(struct nft_ctx *ctx)
 {
-	BUG_ON(ctx->table->use > 0);
+	if (WARN_ON(ctx->table->use > 0))
+		return;
 
 	rhltable_destroy(&ctx->table->chains_ht);
 	kfree(ctx->table->name);
@@ -1446,7 +1447,8 @@ static void nf_tables_chain_destroy(struct nft_ctx *ctx)
 {
 	struct nft_chain *chain = ctx->chain;
 
-	BUG_ON(chain->use > 0);
+	if (WARN_ON(chain->use > 0))
+		return;
 
 	/* no concurrent access possible anymore */
 	nf_tables_chain_free_chain_rules(chain);
@@ -7253,7 +7255,8 @@ int __nft_release_basechain(struct nft_ctx *ctx)
 {
 	struct nft_rule *rule, *nr;
 
-	BUG_ON(!nft_is_base_chain(ctx->chain));
+	if (WARN_ON(!nft_is_base_chain(ctx->chain)))
+		return 0;
 
 	nf_tables_unregister_hook(ctx->net, ctx->chain->table, ctx->chain);
 	list_for_each_entry_safe(rule, nr, &ctx->chain->rules, list) {
diff --git a/net/netfilter/nft_cmp.c b/net/netfilter/nft_cmp.c
index fa90a8402845d..79d48c1d06f4d 100644
--- a/net/netfilter/nft_cmp.c
+++ b/net/netfilter/nft_cmp.c
@@ -79,7 +79,8 @@ static int nft_cmp_init(const struct nft_ctx *ctx, const struct nft_expr *expr,
 
 	err = nft_data_init(NULL, &priv->data, sizeof(priv->data), &desc,
 			    tb[NFTA_CMP_DATA]);
-	BUG_ON(err < 0);
+	if (err < 0)
+		return err;
 
 	priv->sreg = nft_parse_register(tb[NFTA_CMP_SREG]);
 	err = nft_validate_register_load(priv->sreg, desc.len);
@@ -129,7 +130,8 @@ static int nft_cmp_fast_init(const struct nft_ctx *ctx,
 
 	err = nft_data_init(NULL, &data, sizeof(data), &desc,
 			    tb[NFTA_CMP_DATA]);
-	BUG_ON(err < 0);
+	if (err < 0)
+		return err;
 
 	priv->sreg = nft_parse_register(tb[NFTA_CMP_SREG]);
 	err = nft_validate_register_load(priv->sreg, desc.len);
diff --git a/net/netfilter/nft_reject.c b/net/netfilter/nft_reject.c
index 29f5bd2377b0d..b48e58cceeb72 100644
--- a/net/netfilter/nft_reject.c
+++ b/net/netfilter/nft_reject.c
@@ -94,7 +94,8 @@ static u8 icmp_code_v4[NFT_REJECT_ICMPX_MAX + 1] = {
 
 int nft_reject_icmp_code(u8 code)
 {
-	BUG_ON(code > NFT_REJECT_ICMPX_MAX);
+	if (WARN_ON_ONCE(code > NFT_REJECT_ICMPX_MAX))
+		return ICMP_NET_UNREACH;
 
 	return icmp_code_v4[code];
 }
@@ -111,7 +112,8 @@ static u8 icmp_code_v6[NFT_REJECT_ICMPX_MAX + 1] = {
 
 int nft_reject_icmpv6_code(u8 code)
 {
-	BUG_ON(code > NFT_REJECT_ICMPX_MAX);
+	if (WARN_ON_ONCE(code > NFT_REJECT_ICMPX_MAX))
+		return ICMPV6_NOROUTE;
 
 	return icmp_code_v6[code];
 }
-- 
2.20.1

[PATCH AUTOSEL 4.19 204/205] s390/qeth: limit csum offload erratum to L3 devices

[Sasha Levin]

From: Julian Wiedmann <jwi@linux.ibm.com>

[ Upstream commit f231dc9dbd789b0f98a15941e3cebedb4ad72ad5 ]

Combined L3+L4 csum offload is only required for some L3 HW. So for
L2 devices, don't offload the IP header csum calculation.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reference-ID: JUP 394553
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/s390/net/qeth_core.h    | 5 -----
 drivers/s390/net/qeth_l3_main.c | 5 +++++
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
index b2657582cfcfd..41a2f901ccee5 100644
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -902,11 +902,6 @@ static inline void qeth_tx_csum(struct sk_buff *skb, u8 *flags, int ipv)
 	if ((ipv == 4 && ip_hdr(skb)->protocol == IPPROTO_UDP) ||
 	    (ipv == 6 && ipv6_hdr(skb)->nexthdr == IPPROTO_UDP))
 		*flags |= QETH_HDR_EXT_UDP;
-	if (ipv == 4) {
-		/* some HW requires combined L3+L4 csum offload: */
-		*flags |= QETH_HDR_EXT_CSUM_HDR_REQ;
-		ip_hdr(skb)->check = 0;
-	}
 }
 
 static inline void qeth_put_buffer_pool_entry(struct qeth_card *card,
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index 9c5e801b3f6cb..c60660cb5a031 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -2054,6 +2054,11 @@ static void qeth_l3_fill_header(struct qeth_card *card, struct qeth_hdr *hdr,
 
 	if (!skb_is_gso(skb) && skb->ip_summed == CHECKSUM_PARTIAL) {
 		qeth_tx_csum(skb, &hdr->hdr.l3.ext_flags, ipv);
+		/* some HW requires combined L3+L4 csum offload: */
+		if (ipv == 4) {
+			hdr->hdr.l3.ext_flags |= QETH_HDR_EXT_CSUM_HDR_REQ;
+			ip_hdr(skb)->check = 0;
+		}
 		if (card->options.performance_stats)
 			card->perf_stats.tx_csum++;
 	}
-- 
2.20.1

Re: [PATCH AUTOSEL 4.19 204/205] s390/qeth: limit csum offload erratum to L3 devices

[Julian Wiedmann]

On 08.11.19 12:37, Sasha Levin wrote:
> From: Julian Wiedmann <jwi@linux.ibm.com>
> 
> [ Upstream commit f231dc9dbd789b0f98a15941e3cebedb4ad72ad5 ]
> 
> Combined L3+L4 csum offload is only required for some L3 HW. So for
> L2 devices, don't offload the IP header csum calculation.
> 

NACK, this has no relevance for stable.


> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
> Reference-ID: JUP 394553
> Signed-off-by: David S. Miller <davem@davemloft.net>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  drivers/s390/net/qeth_core.h    | 5 -----
>  drivers/s390/net/qeth_l3_main.c | 5 +++++
>  2 files changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
> index b2657582cfcfd..41a2f901ccee5 100644
> --- a/drivers/s390/net/qeth_core.h
> +++ b/drivers/s390/net/qeth_core.h
> @@ -902,11 +902,6 @@ static inline void qeth_tx_csum(struct sk_buff *skb, u8 *flags, int ipv)
>  	if ((ipv == 4 && ip_hdr(skb)->protocol == IPPROTO_UDP) ||
>  	    (ipv == 6 && ipv6_hdr(skb)->nexthdr == IPPROTO_UDP))
>  		*flags |= QETH_HDR_EXT_UDP;
> -	if (ipv == 4) {
> -		/* some HW requires combined L3+L4 csum offload: */
> -		*flags |= QETH_HDR_EXT_CSUM_HDR_REQ;
> -		ip_hdr(skb)->check = 0;
> -	}
>  }
>  
>  static inline void qeth_put_buffer_pool_entry(struct qeth_card *card,
> diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
> index 9c5e801b3f6cb..c60660cb5a031 100644
> --- a/drivers/s390/net/qeth_l3_main.c
> +++ b/drivers/s390/net/qeth_l3_main.c
> @@ -2054,6 +2054,11 @@ static void qeth_l3_fill_header(struct qeth_card *card, struct qeth_hdr *hdr,
>  
>  	if (!skb_is_gso(skb) && skb->ip_summed == CHECKSUM_PARTIAL) {
>  		qeth_tx_csum(skb, &hdr->hdr.l3.ext_flags, ipv);
> +		/* some HW requires combined L3+L4 csum offload: */
> +		if (ipv == 4) {
> +			hdr->hdr.l3.ext_flags |= QETH_HDR_EXT_CSUM_HDR_REQ;
> +			ip_hdr(skb)->check = 0;
> +		}
>  		if (card->options.performance_stats)
>  			card->perf_stats.tx_csum++;
>  	}
> 

Re: [PATCH AUTOSEL 4.19 204/205] s390/qeth: limit csum offload erratum to L3 devices

[Sasha Levin]

On Fri, Nov 08, 2019 at 12:50:24PM +0100, Julian Wiedmann wrote:
>On 08.11.19 12:37, Sasha Levin wrote:
>> From: Julian Wiedmann <jwi@linux.ibm.com>
>>
>> [ Upstream commit f231dc9dbd789b0f98a15941e3cebedb4ad72ad5 ]
>>
>> Combined L3+L4 csum offload is only required for some L3 HW. So for
>> L2 devices, don't offload the IP header csum calculation.
>>
>
>NACK, this has no relevance for stable.

Sure, I'll drop it.

Do you have an idea why the centos and ubuntu folks might have
backported this commit into their kernels?

-- 
Thanks,
Sasha

Re: [PATCH AUTOSEL 4.19 204/205] s390/qeth: limit csum offload erratum to L3 devices

[Julian Wiedmann]

On 08.11.19 13:00, Sasha Levin wrote:
> On Fri, Nov 08, 2019 at 12:50:24PM +0100, Julian Wiedmann wrote:
>> On 08.11.19 12:37, Sasha Levin wrote:
>>> From: Julian Wiedmann <jwi@linux.ibm.com>
>>>
>>> [ Upstream commit f231dc9dbd789b0f98a15941e3cebedb4ad72ad5 ]
>>>
>>> Combined L3+L4 csum offload is only required for some L3 HW. So for
>>> L2 devices, don't offload the IP header csum calculation.
>>>
>>
>> NACK, this has no relevance for stable.
> 
> Sure, I'll drop it.
> 
> Do you have an idea why the centos and ubuntu folks might have
> backported this commit into their kernels?
> 

No clue, I trust they have their own reasons.

Re: [PATCH AUTOSEL 4.19 204/205] s390/qeth: limit csum offload erratum to L3 devices

[Greg KH]

On Fri, Nov 08, 2019 at 01:16:26PM +0100, Julian Wiedmann wrote:
> On 08.11.19 13:00, Sasha Levin wrote:
> > On Fri, Nov 08, 2019 at 12:50:24PM +0100, Julian Wiedmann wrote:
> >> On 08.11.19 12:37, Sasha Levin wrote:
> >>> From: Julian Wiedmann <jwi@linux.ibm.com>
> >>>
> >>> [ Upstream commit f231dc9dbd789b0f98a15941e3cebedb4ad72ad5 ]
> >>>
> >>> Combined L3+L4 csum offload is only required for some L3 HW. So for
> >>> L2 devices, don't offload the IP header csum calculation.
> >>>
> >>
> >> NACK, this has no relevance for stable.
> > 
> > Sure, I'll drop it.
> > 
> > Do you have an idea why the centos and ubuntu folks might have
> > backported this commit into their kernels?
> > 
> 
> No clue, I trust they have their own reasons.
> 

I cant see centos backporting anything unless they were asked to do so.
And this really looks like a "bugfix" to me, why isn't this relevant for
any older kernel versions?

thanks,

greg k-h

Re: [PATCH AUTOSEL 4.19 204/205] s390/qeth: limit csum offload erratum to L3 devices

[David Miller]

From: Greg KH <gregkh@linuxfoundation.org>
Date: Fri, 8 Nov 2019 13:34:16 +0100

> On Fri, Nov 08, 2019 at 01:16:26PM +0100, Julian Wiedmann wrote:
>> On 08.11.19 13:00, Sasha Levin wrote:
>> > On Fri, Nov 08, 2019 at 12:50:24PM +0100, Julian Wiedmann wrote:
>> >> On 08.11.19 12:37, Sasha Levin wrote:
>> >>> From: Julian Wiedmann <jwi@linux.ibm.com>
>> >>>
>> >>> [ Upstream commit f231dc9dbd789b0f98a15941e3cebedb4ad72ad5 ]
>> >>>
>> >>> Combined L3+L4 csum offload is only required for some L3 HW. So for
>> >>> L2 devices, don't offload the IP header csum calculation.
>> >>>
>> >>
>> >> NACK, this has no relevance for stable.
>> > 
>> > Sure, I'll drop it.
>> > 
>> > Do you have an idea why the centos and ubuntu folks might have
>> > backported this commit into their kernels?
>> > 
>> 
>> No clue, I trust they have their own reasons.
>> 
> 
> I cant see centos backporting anything unless they were asked to do so.
> And this really looks like a "bugfix" to me, why isn't this relevant for
> any older kernel versions?

Yeah seriously, this looks entirely legit.

Re: [PATCH AUTOSEL 4.19 204/205] s390/qeth: limit csum offload erratum to L3 devices

[Julian Wiedmann]

On 08.11.19 20:35, David Miller wrote:
> From: Greg KH <gregkh@linuxfoundation.org>
> Date: Fri, 8 Nov 2019 13:34:16 +0100
> 
>> On Fri, Nov 08, 2019 at 01:16:26PM +0100, Julian Wiedmann wrote:
>>> On 08.11.19 13:00, Sasha Levin wrote:
>>>> On Fri, Nov 08, 2019 at 12:50:24PM +0100, Julian Wiedmann wrote:
>>>>> On 08.11.19 12:37, Sasha Levin wrote:
>>>>>> From: Julian Wiedmann <jwi@linux.ibm.com>
>>>>>>
>>>>>> [ Upstream commit f231dc9dbd789b0f98a15941e3cebedb4ad72ad5 ]
>>>>>>
>>>>>> Combined L3+L4 csum offload is only required for some L3 HW. So for
>>>>>> L2 devices, don't offload the IP header csum calculation.
>>>>>>
>>>>>
>>>>> NACK, this has no relevance for stable.
>>>>
>>>> Sure, I'll drop it.
>>>>
>>>> Do you have an idea why the centos and ubuntu folks might have
>>>> backported this commit into their kernels?
>>>>
>>>
>>> No clue, I trust they have their own reasons.
>>>
>>
>> I cant see centos backporting anything unless they were asked to do so.
>> And this really looks like a "bugfix" to me, why isn't this relevant for
>> any older kernel versions?
> 
> Yeah seriously, this looks entirely legit.
> 

I can assure you this doesn't fix any actual bug, and there's zero user
impact from _not_ having this patch.

[PATCH AUTOSEL 4.19 205/205] ath9k: Fix a locking bug in ath9k_add_interface()

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 461cf036057477805a8a391e5fd0f5264a5e56a8 ]

We tried to revert commit d9c52fd17cb4 ("ath9k: fix tx99 with monitor
mode interface") but accidentally missed part of the locking change.

The lock has to be held earlier so that we're holding it when we do
"sc->tx99_vif = vif;" and also there in the current code there is a
stray unlock before we have taken the lock.

Fixes: 6df0580be8bc ("ath9k: add back support for using active monitor interfaces for tx99")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/main.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index c85f613e8ceb5..74f98bbaea889 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -1251,6 +1251,7 @@ static int ath9k_add_interface(struct ieee80211_hw *hw,
 	struct ath_vif *avp = (void *)vif->drv_priv;
 	struct ath_node *an = &avp->mcast_node;
 
+	mutex_lock(&sc->mutex);
 	if (IS_ENABLED(CONFIG_ATH9K_TX99)) {
 		if (sc->cur_chan->nvifs >= 1) {
 			mutex_unlock(&sc->mutex);
@@ -1259,8 +1260,6 @@ static int ath9k_add_interface(struct ieee80211_hw *hw,
 		sc->tx99_vif = vif;
 	}
 
-	mutex_lock(&sc->mutex);
-
 	ath_dbg(common, CONFIG, "Attach a VIF of type: %d\n", vif->type);
 	sc->cur_chan->nvifs++;
 
-- 
2.20.1