* [PATCH 0/2] x86/insn: Add some Intel instructions to the opcode map
@ 2019-11-15 13:54 Adrian Hunter
2019-11-15 13:54 ` [PATCH 1/2] x86/insn: perf tools: Add some instructions to the new instructions test Adrian Hunter
2019-11-15 13:54 ` [PATCH 2/2] x86/insn: Add some Intel instructions to the opcode map Adrian Hunter
0 siblings, 2 replies; 7+ messages in thread
From: Adrian Hunter @ 2019-11-15 13:54 UTC (permalink / raw)
To: x86
Cc: Arnaldo Carvalho de Melo, Jiri Olsa, linux-kernel,
Thomas Gleixner, Ingo Molnar, Borislav Petkov, H Peter Anvin,
Andi Kleen, Peter Zijlstra, Masami Hiramatsu
Hi
Here is a patch to update the x86 opcode map, and a patch to update the
perf tools' "new instructions" test accordingly.
There are still a lot of AVX instructions to add and also
CET instructions, which Yu-cheng is adding.
Adrian Hunter (2):
x86/insn: perf tools: Add some instructions to the new instructions test
x86/insn: Add some Intel instructions to the opcode map
arch/x86/lib/x86-opcode-map.txt | 18 +++--
tools/arch/x86/lib/x86-opcode-map.txt | 18 +++--
tools/perf/arch/x86/tests/insn-x86-dat-32.c | 52 +++++++++++++
tools/perf/arch/x86/tests/insn-x86-dat-64.c | 62 +++++++++++++++
tools/perf/arch/x86/tests/insn-x86-dat-src.c | 109 +++++++++++++++++++++++++++
5 files changed, 247 insertions(+), 12 deletions(-)
Regards
Adrian
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 1/2] x86/insn: perf tools: Add some instructions to the new instructions test
2019-11-15 13:54 [PATCH 0/2] x86/insn: Add some Intel instructions to the opcode map Adrian Hunter
@ 2019-11-15 13:54 ` Adrian Hunter
2019-11-19 16:56 ` [tip: perf/core] " tip-bot2 for Adrian Hunter
2019-11-15 13:54 ` [PATCH 2/2] x86/insn: Add some Intel instructions to the opcode map Adrian Hunter
1 sibling, 1 reply; 7+ messages in thread
From: Adrian Hunter @ 2019-11-15 13:54 UTC (permalink / raw)
To: x86
Cc: Arnaldo Carvalho de Melo, Jiri Olsa, linux-kernel,
Thomas Gleixner, Ingo Molnar, Borislav Petkov, H Peter Anvin,
Andi Kleen, Peter Zijlstra, Masami Hiramatsu
Add to the "x86 instruction decoder - new instructions" test the following
instructions:
cldemote
tpause
umonitor
umwait
movdiri
movdir64b
enqcmd
enqcmds
encls
enclu
enclv
pconfig
wbnoinvd
For information about the instructions, refer Intel SDM May 2019
(325462-070US) and Intel Architecture Instruction Set Extensions
May 2019 (319433-037).
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
---
tools/perf/arch/x86/tests/insn-x86-dat-32.c | 52 +++++++++
tools/perf/arch/x86/tests/insn-x86-dat-64.c | 62 +++++++++++
tools/perf/arch/x86/tests/insn-x86-dat-src.c | 109 +++++++++++++++++++
3 files changed, 223 insertions(+)
diff --git a/tools/perf/arch/x86/tests/insn-x86-dat-32.c b/tools/perf/arch/x86/tests/insn-x86-dat-32.c
index fab3c6de73fa..58f8f2a095c4 100644
--- a/tools/perf/arch/x86/tests/insn-x86-dat-32.c
+++ b/tools/perf/arch/x86/tests/insn-x86-dat-32.c
@@ -1647,6 +1647,12 @@
"0f ae 30 \txsaveopt (%eax)",},
{{0x0f, 0xae, 0xf0, }, 3, 0, "", "",
"0f ae f0 \tmfence ",},
+{{0x0f, 0x1c, 0x00, }, 3, 0, "", "",
+"0f 1c 00 \tcldemote (%eax)",},
+{{0x0f, 0x1c, 0x05, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "", "",
+"0f 1c 05 78 56 34 12 \tcldemote 0x12345678",},
+{{0x0f, 0x1c, 0x84, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "",
+"0f 1c 84 c8 78 56 34 12 \tcldemote 0x12345678(%eax,%ecx,8)",},
{{0x0f, 0xc7, 0x20, }, 3, 0, "", "",
"0f c7 20 \txsavec (%eax)",},
{{0x0f, 0xc7, 0x25, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "", "",
@@ -1677,3 +1683,49 @@
"f3 0f ae 25 78 56 34 12 \tptwritel 0x12345678",},
{{0xf3, 0x0f, 0xae, 0xa4, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
"f3 0f ae a4 c8 78 56 34 12 \tptwritel 0x12345678(%eax,%ecx,8)",},
+{{0x66, 0x0f, 0xae, 0xf3, }, 4, 0, "", "",
+"66 0f ae f3 \ttpause %ebx",},
+{{0x67, 0xf3, 0x0f, 0xae, 0xf0, }, 5, 0, "", "",
+"67 f3 0f ae f0 \tumonitor %ax",},
+{{0xf3, 0x0f, 0xae, 0xf0, }, 4, 0, "", "",
+"f3 0f ae f0 \tumonitor %eax",},
+{{0xf2, 0x0f, 0xae, 0xf0, }, 4, 0, "", "",
+"f2 0f ae f0 \tumwait %eax",},
+{{0x0f, 0x38, 0xf9, 0x03, }, 4, 0, "", "",
+"0f 38 f9 03 \tmovdiri %eax,(%ebx)",},
+{{0x0f, 0x38, 0xf9, 0x88, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "",
+"0f 38 f9 88 78 56 34 12 \tmovdiri %ecx,0x12345678(%eax)",},
+{{0x66, 0x0f, 0x38, 0xf8, 0x18, }, 5, 0, "", "",
+"66 0f 38 f8 18 \tmovdir64b (%eax),%ebx",},
+{{0x66, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
+"66 0f 38 f8 88 78 56 34 12 \tmovdir64b 0x12345678(%eax),%ecx",},
+{{0x67, 0x66, 0x0f, 0x38, 0xf8, 0x1c, }, 6, 0, "", "",
+"67 66 0f 38 f8 1c \tmovdir64b (%si),%bx",},
+{{0x67, 0x66, 0x0f, 0x38, 0xf8, 0x8c, 0x34, 0x12, }, 8, 0, "", "",
+"67 66 0f 38 f8 8c 34 12 \tmovdir64b 0x1234(%si),%cx",},
+{{0xf2, 0x0f, 0x38, 0xf8, 0x18, }, 5, 0, "", "",
+"f2 0f 38 f8 18 \tenqcmd (%eax),%ebx",},
+{{0xf2, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
+"f2 0f 38 f8 88 78 56 34 12 \tenqcmd 0x12345678(%eax),%ecx",},
+{{0x67, 0xf2, 0x0f, 0x38, 0xf8, 0x1c, }, 6, 0, "", "",
+"67 f2 0f 38 f8 1c \tenqcmd (%si),%bx",},
+{{0x67, 0xf2, 0x0f, 0x38, 0xf8, 0x8c, 0x34, 0x12, }, 8, 0, "", "",
+"67 f2 0f 38 f8 8c 34 12 \tenqcmd 0x1234(%si),%cx",},
+{{0xf3, 0x0f, 0x38, 0xf8, 0x18, }, 5, 0, "", "",
+"f3 0f 38 f8 18 \tenqcmds (%eax),%ebx",},
+{{0xf3, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
+"f3 0f 38 f8 88 78 56 34 12 \tenqcmds 0x12345678(%eax),%ecx",},
+{{0x67, 0xf3, 0x0f, 0x38, 0xf8, 0x1c, }, 6, 0, "", "",
+"67 f3 0f 38 f8 1c \tenqcmds (%si),%bx",},
+{{0x67, 0xf3, 0x0f, 0x38, 0xf8, 0x8c, 0x34, 0x12, }, 8, 0, "", "",
+"67 f3 0f 38 f8 8c 34 12 \tenqcmds 0x1234(%si),%cx",},
+{{0x0f, 0x01, 0xcf, }, 3, 0, "", "",
+"0f 01 cf \tencls ",},
+{{0x0f, 0x01, 0xd7, }, 3, 0, "", "",
+"0f 01 d7 \tenclu ",},
+{{0x0f, 0x01, 0xc0, }, 3, 0, "", "",
+"0f 01 c0 \tenclv ",},
+{{0x0f, 0x01, 0xc5, }, 3, 0, "", "",
+"0f 01 c5 \tpconfig ",},
+{{0xf3, 0x0f, 0x09, }, 3, 0, "", "",
+"f3 0f 09 \twbnoinvd ",},
diff --git a/tools/perf/arch/x86/tests/insn-x86-dat-64.c b/tools/perf/arch/x86/tests/insn-x86-dat-64.c
index c57f34603b9b..656f8aed31de 100644
--- a/tools/perf/arch/x86/tests/insn-x86-dat-64.c
+++ b/tools/perf/arch/x86/tests/insn-x86-dat-64.c
@@ -1667,6 +1667,16 @@
"41 0f ae 30 \txsaveopt (%r8)",},
{{0x0f, 0xae, 0xf0, }, 3, 0, "", "",
"0f ae f0 \tmfence ",},
+{{0x0f, 0x1c, 0x00, }, 3, 0, "", "",
+"0f 1c 00 \tcldemote (%rax)",},
+{{0x41, 0x0f, 0x1c, 0x00, }, 4, 0, "", "",
+"41 0f 1c 00 \tcldemote (%r8)",},
+{{0x0f, 0x1c, 0x04, 0x25, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "",
+"0f 1c 04 25 78 56 34 12 \tcldemote 0x12345678",},
+{{0x0f, 0x1c, 0x84, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "",
+"0f 1c 84 c8 78 56 34 12 \tcldemote 0x12345678(%rax,%rcx,8)",},
+{{0x41, 0x0f, 0x1c, 0x84, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
+"41 0f 1c 84 c8 78 56 34 12 \tcldemote 0x12345678(%r8,%rcx,8)",},
{{0x0f, 0xc7, 0x20, }, 3, 0, "", "",
"0f c7 20 \txsavec (%rax)",},
{{0x41, 0x0f, 0xc7, 0x20, }, 4, 0, "", "",
@@ -1727,3 +1737,55 @@
"f3 48 0f ae a4 c8 78 56 34 12 \tptwriteq 0x12345678(%rax,%rcx,8)",},
{{0xf3, 0x49, 0x0f, 0xae, 0xa4, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 10, 0, "", "",
"f3 49 0f ae a4 c8 78 56 34 12 \tptwriteq 0x12345678(%r8,%rcx,8)",},
+{{0x66, 0x0f, 0xae, 0xf3, }, 4, 0, "", "",
+"66 0f ae f3 \ttpause %ebx",},
+{{0x66, 0x41, 0x0f, 0xae, 0xf0, }, 5, 0, "", "",
+"66 41 0f ae f0 \ttpause %r8d",},
+{{0x67, 0xf3, 0x0f, 0xae, 0xf0, }, 5, 0, "", "",
+"67 f3 0f ae f0 \tumonitor %eax",},
+{{0xf3, 0x0f, 0xae, 0xf0, }, 4, 0, "", "",
+"f3 0f ae f0 \tumonitor %rax",},
+{{0x67, 0xf3, 0x41, 0x0f, 0xae, 0xf0, }, 6, 0, "", "",
+"67 f3 41 0f ae f0 \tumonitor %r8d",},
+{{0xf2, 0x0f, 0xae, 0xf0, }, 4, 0, "", "",
+"f2 0f ae f0 \tumwait %eax",},
+{{0xf2, 0x41, 0x0f, 0xae, 0xf0, }, 5, 0, "", "",
+"f2 41 0f ae f0 \tumwait %r8d",},
+{{0x48, 0x0f, 0x38, 0xf9, 0x03, }, 5, 0, "", "",
+"48 0f 38 f9 03 \tmovdiri %rax,(%rbx)",},
+{{0x48, 0x0f, 0x38, 0xf9, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
+"48 0f 38 f9 88 78 56 34 12 \tmovdiri %rcx,0x12345678(%rax)",},
+{{0x66, 0x0f, 0x38, 0xf8, 0x18, }, 5, 0, "", "",
+"66 0f 38 f8 18 \tmovdir64b (%rax),%rbx",},
+{{0x66, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
+"66 0f 38 f8 88 78 56 34 12 \tmovdir64b 0x12345678(%rax),%rcx",},
+{{0x67, 0x66, 0x0f, 0x38, 0xf8, 0x18, }, 6, 0, "", "",
+"67 66 0f 38 f8 18 \tmovdir64b (%eax),%ebx",},
+{{0x67, 0x66, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 10, 0, "", "",
+"67 66 0f 38 f8 88 78 56 34 12 \tmovdir64b 0x12345678(%eax),%ecx",},
+{{0xf2, 0x0f, 0x38, 0xf8, 0x18, }, 5, 0, "", "",
+"f2 0f 38 f8 18 \tenqcmd (%rax),%rbx",},
+{{0xf2, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
+"f2 0f 38 f8 88 78 56 34 12 \tenqcmd 0x12345678(%rax),%rcx",},
+{{0x67, 0xf2, 0x0f, 0x38, 0xf8, 0x18, }, 6, 0, "", "",
+"67 f2 0f 38 f8 18 \tenqcmd (%eax),%ebx",},
+{{0x67, 0xf2, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 10, 0, "", "",
+"67 f2 0f 38 f8 88 78 56 34 12 \tenqcmd 0x12345678(%eax),%ecx",},
+{{0xf3, 0x0f, 0x38, 0xf8, 0x18, }, 5, 0, "", "",
+"f3 0f 38 f8 18 \tenqcmds (%rax),%rbx",},
+{{0xf3, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
+"f3 0f 38 f8 88 78 56 34 12 \tenqcmds 0x12345678(%rax),%rcx",},
+{{0x67, 0xf3, 0x0f, 0x38, 0xf8, 0x18, }, 6, 0, "", "",
+"67 f3 0f 38 f8 18 \tenqcmds (%eax),%ebx",},
+{{0x67, 0xf3, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 10, 0, "", "",
+"67 f3 0f 38 f8 88 78 56 34 12 \tenqcmds 0x12345678(%eax),%ecx",},
+{{0x0f, 0x01, 0xcf, }, 3, 0, "", "",
+"0f 01 cf \tencls ",},
+{{0x0f, 0x01, 0xd7, }, 3, 0, "", "",
+"0f 01 d7 \tenclu ",},
+{{0x0f, 0x01, 0xc0, }, 3, 0, "", "",
+"0f 01 c0 \tenclv ",},
+{{0x0f, 0x01, 0xc5, }, 3, 0, "", "",
+"0f 01 c5 \tpconfig ",},
+{{0xf3, 0x0f, 0x09, }, 3, 0, "", "",
+"f3 0f 09 \twbnoinvd ",},
diff --git a/tools/perf/arch/x86/tests/insn-x86-dat-src.c b/tools/perf/arch/x86/tests/insn-x86-dat-src.c
index 891415b10984..dd85a3afd9ce 100644
--- a/tools/perf/arch/x86/tests/insn-x86-dat-src.c
+++ b/tools/perf/arch/x86/tests/insn-x86-dat-src.c
@@ -1320,6 +1320,14 @@ int main(void)
asm volatile("xsaveopt (%r8)");
asm volatile("mfence");
+ /* cldemote m8 */
+
+ asm volatile("cldemote (%rax)");
+ asm volatile("cldemote (%r8)");
+ asm volatile("cldemote (0x12345678)");
+ asm volatile("cldemote 0x12345678(%rax,%rcx,8)");
+ asm volatile("cldemote 0x12345678(%r8,%rcx,8)");
+
/* xsavec mem */
asm volatile("xsavec (%rax)");
@@ -1364,6 +1372,48 @@ int main(void)
asm volatile("ptwriteq 0x12345678(%rax,%rcx,8)");
asm volatile("ptwriteq 0x12345678(%r8,%rcx,8)");
+ /* tpause */
+
+ asm volatile("tpause %ebx");
+ asm volatile("tpause %r8d");
+
+ /* umonitor */
+
+ asm volatile("umonitor %eax");
+ asm volatile("umonitor %rax");
+ asm volatile("umonitor %r8d");
+
+ /* umwait */
+
+ asm volatile("umwait %eax");
+ asm volatile("umwait %r8d");
+
+ /* movdiri */
+
+ asm volatile("movdiri %rax,(%rbx)");
+ asm volatile("movdiri %rcx,0x12345678(%rax)");
+
+ /* movdir64b */
+
+ asm volatile("movdir64b (%rax),%rbx");
+ asm volatile("movdir64b 0x12345678(%rax),%rcx");
+ asm volatile("movdir64b (%eax),%ebx");
+ asm volatile("movdir64b 0x12345678(%eax),%ecx");
+
+ /* enqcmd */
+
+ asm volatile("enqcmd (%rax),%rbx");
+ asm volatile("enqcmd 0x12345678(%rax),%rcx");
+ asm volatile("enqcmd (%eax),%ebx");
+ asm volatile("enqcmd 0x12345678(%eax),%ecx");
+
+ /* enqcmds */
+
+ asm volatile("enqcmds (%rax),%rbx");
+ asm volatile("enqcmds 0x12345678(%rax),%rcx");
+ asm volatile("enqcmds (%eax),%ebx");
+ asm volatile("enqcmds 0x12345678(%eax),%ecx");
+
#else /* #ifdef __x86_64__ */
/* bound r32, mem (same op code as EVEX prefix) */
@@ -2656,6 +2706,12 @@ int main(void)
asm volatile("xsaveopt (%eax)");
asm volatile("mfence");
+ /* cldemote m8 */
+
+ asm volatile("cldemote (%eax)");
+ asm volatile("cldemote (0x12345678)");
+ asm volatile("cldemote 0x12345678(%eax,%ecx,8)");
+
/* xsavec mem */
asm volatile("xsavec (%eax)");
@@ -2684,8 +2740,61 @@ int main(void)
asm volatile("ptwritel (0x12345678)");
asm volatile("ptwritel 0x12345678(%eax,%ecx,8)");
+ /* tpause */
+
+ asm volatile("tpause %ebx");
+
+ /* umonitor */
+
+ asm volatile("umonitor %ax");
+ asm volatile("umonitor %eax");
+
+ /* umwait */
+
+ asm volatile("umwait %eax");
+
+ /* movdiri */
+
+ asm volatile("movdiri %eax,(%ebx)");
+ asm volatile("movdiri %ecx,0x12345678(%eax)");
+
+ /* movdir64b */
+
+ asm volatile("movdir64b (%eax),%ebx");
+ asm volatile("movdir64b 0x12345678(%eax),%ecx");
+ asm volatile("movdir64b (%si),%bx");
+ asm volatile("movdir64b 0x1234(%si),%cx");
+
+ /* enqcmd */
+
+ asm volatile("enqcmd (%eax),%ebx");
+ asm volatile("enqcmd 0x12345678(%eax),%ecx");
+ asm volatile("enqcmd (%si),%bx");
+ asm volatile("enqcmd 0x1234(%si),%cx");
+
+ /* enqcmds */
+
+ asm volatile("enqcmds (%eax),%ebx");
+ asm volatile("enqcmds 0x12345678(%eax),%ecx");
+ asm volatile("enqcmds (%si),%bx");
+ asm volatile("enqcmds 0x1234(%si),%cx");
+
#endif /* #ifndef __x86_64__ */
+ /* SGX */
+
+ asm volatile("encls");
+ asm volatile("enclu");
+ asm volatile("enclv");
+
+ /* pconfig */
+
+ asm volatile("pconfig");
+
+ /* wbnoinvd */
+
+ asm volatile("wbnoinvd");
+
/* Following line is a marker for the awk script - do not change */
asm volatile("rdtsc"); /* Stop here */
--
2.17.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 2/2] x86/insn: Add some Intel instructions to the opcode map
2019-11-15 13:54 [PATCH 0/2] x86/insn: Add some Intel instructions to the opcode map Adrian Hunter
2019-11-15 13:54 ` [PATCH 1/2] x86/insn: perf tools: Add some instructions to the new instructions test Adrian Hunter
@ 2019-11-15 13:54 ` Adrian Hunter
2019-11-18 11:40 ` Masami Hiramatsu
2019-11-19 16:56 ` [tip: perf/core] " tip-bot2 for Adrian Hunter
1 sibling, 2 replies; 7+ messages in thread
From: Adrian Hunter @ 2019-11-15 13:54 UTC (permalink / raw)
To: x86
Cc: Arnaldo Carvalho de Melo, Jiri Olsa, linux-kernel,
Thomas Gleixner, Ingo Molnar, Borislav Petkov, H Peter Anvin,
Andi Kleen, Peter Zijlstra, Masami Hiramatsu
Add to the opcode map the following instructions:
cldemote
tpause
umonitor
umwait
movdiri
movdir64b
enqcmd
enqcmds
encls
enclu
enclv
pconfig
wbnoinvd
For information about the instructions, refer Intel SDM May 2019
(325462-070US) and Intel Architecture Instruction Set Extensions
May 2019 (319433-037).
The instruction decoding can be tested using the perf tools'
"x86 instruction decoder - new instructions" test as folllows:
$ perf test -v "new " 2>&1 | grep -i cldemote
Decoded ok: 0f 1c 00 cldemote (%eax)
Decoded ok: 0f 1c 05 78 56 34 12 cldemote 0x12345678
Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%eax,%ecx,8)
Decoded ok: 0f 1c 00 cldemote (%rax)
Decoded ok: 41 0f 1c 00 cldemote (%r8)
Decoded ok: 0f 1c 04 25 78 56 34 12 cldemote 0x12345678
Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%rax,%rcx,8)
Decoded ok: 41 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%r8,%rcx,8)
$ perf test -v "new " 2>&1 | grep -i tpause
Decoded ok: 66 0f ae f3 tpause %ebx
Decoded ok: 66 0f ae f3 tpause %ebx
Decoded ok: 66 41 0f ae f0 tpause %r8d
$ perf test -v "new " 2>&1 | grep -i umonitor
Decoded ok: 67 f3 0f ae f0 umonitor %ax
Decoded ok: f3 0f ae f0 umonitor %eax
Decoded ok: 67 f3 0f ae f0 umonitor %eax
Decoded ok: f3 0f ae f0 umonitor %rax
Decoded ok: 67 f3 41 0f ae f0 umonitor %r8d
$ perf test -v "new " 2>&1 | grep -i umwait
Decoded ok: f2 0f ae f0 umwait %eax
Decoded ok: f2 0f ae f0 umwait %eax
Decoded ok: f2 41 0f ae f0 umwait %r8d
$ perf test -v "new " 2>&1 | grep -i movdiri
Decoded ok: 0f 38 f9 03 movdiri %eax,(%ebx)
Decoded ok: 0f 38 f9 88 78 56 34 12 movdiri %ecx,0x12345678(%eax)
Decoded ok: 48 0f 38 f9 03 movdiri %rax,(%rbx)
Decoded ok: 48 0f 38 f9 88 78 56 34 12 movdiri %rcx,0x12345678(%rax)
$ perf test -v "new " 2>&1 | grep -i movdir64b
Decoded ok: 66 0f 38 f8 18 movdir64b (%eax),%ebx
Decoded ok: 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%eax),%ecx
Decoded ok: 67 66 0f 38 f8 1c movdir64b (%si),%bx
Decoded ok: 67 66 0f 38 f8 8c 34 12 movdir64b 0x1234(%si),%cx
Decoded ok: 66 0f 38 f8 18 movdir64b (%rax),%rbx
Decoded ok: 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%rax),%rcx
Decoded ok: 67 66 0f 38 f8 18 movdir64b (%eax),%ebx
Decoded ok: 67 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%eax),%ecx
$ perf test -v "new " 2>&1 | grep -i enqcmd
Decoded ok: f2 0f 38 f8 18 enqcmd (%eax),%ebx
Decoded ok: f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%eax),%ecx
Decoded ok: 67 f2 0f 38 f8 1c enqcmd (%si),%bx
Decoded ok: 67 f2 0f 38 f8 8c 34 12 enqcmd 0x1234(%si),%cx
Decoded ok: f3 0f 38 f8 18 enqcmds (%eax),%ebx
Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx
Decoded ok: 67 f3 0f 38 f8 1c enqcmds (%si),%bx
Decoded ok: 67 f3 0f 38 f8 8c 34 12 enqcmds 0x1234(%si),%cx
Decoded ok: f2 0f 38 f8 18 enqcmd (%rax),%rbx
Decoded ok: f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%rax),%rcx
Decoded ok: 67 f2 0f 38 f8 18 enqcmd (%eax),%ebx
Decoded ok: 67 f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%eax),%ecx
Decoded ok: f3 0f 38 f8 18 enqcmds (%rax),%rbx
Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%rax),%rcx
Decoded ok: 67 f3 0f 38 f8 18 enqcmds (%eax),%ebx
Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx
$ perf test -v "new " 2>&1 | grep -i enqcmds
Decoded ok: f3 0f 38 f8 18 enqcmds (%eax),%ebx
Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx
Decoded ok: 67 f3 0f 38 f8 1c enqcmds (%si),%bx
Decoded ok: 67 f3 0f 38 f8 8c 34 12 enqcmds 0x1234(%si),%cx
Decoded ok: f3 0f 38 f8 18 enqcmds (%rax),%rbx
Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%rax),%rcx
Decoded ok: 67 f3 0f 38 f8 18 enqcmds (%eax),%ebx
Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx
$ perf test -v "new " 2>&1 | grep -i encls
Decoded ok: 0f 01 cf encls
Decoded ok: 0f 01 cf encls
$ perf test -v "new " 2>&1 | grep -i enclu
Decoded ok: 0f 01 d7 enclu
Decoded ok: 0f 01 d7 enclu
$ perf test -v "new " 2>&1 | grep -i enclv
Decoded ok: 0f 01 c0 enclv
Decoded ok: 0f 01 c0 enclv
$ perf test -v "new " 2>&1 | grep -i pconfig
Decoded ok: 0f 01 c5 pconfig
Decoded ok: 0f 01 c5 pconfig
$ perf test -v "new " 2>&1 | grep -i wbnoinvd
Decoded ok: f3 0f 09 wbnoinvd
Decoded ok: f3 0f 09 wbnoinvd
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
---
arch/x86/lib/x86-opcode-map.txt | 18 ++++++++++++------
tools/arch/x86/lib/x86-opcode-map.txt | 18 ++++++++++++------
2 files changed, 24 insertions(+), 12 deletions(-)
diff --git a/arch/x86/lib/x86-opcode-map.txt b/arch/x86/lib/x86-opcode-map.txt
index e0b85930dd77..0a0e9112f284 100644
--- a/arch/x86/lib/x86-opcode-map.txt
+++ b/arch/x86/lib/x86-opcode-map.txt
@@ -333,7 +333,7 @@ AVXcode: 1
06: CLTS
07: SYSRET (o64)
08: INVD
-09: WBINVD
+09: WBINVD | WBNOINVD (F3)
0a:
0b: UD2 (1B)
0c:
@@ -364,7 +364,7 @@ AVXcode: 1
# a ModR/M byte.
1a: BNDCL Gv,Ev (F3) | BNDCU Gv,Ev (F2) | BNDMOV Gv,Ev (66) | BNDLDX Gv,Ev
1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv
-1c:
+1c: Grp20 (1A),(1C)
1d:
1e:
1f: NOP Ev
@@ -792,6 +792,8 @@ f3: Grp17 (1A)
f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v)
f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v)
f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v)
+f8: MOVDIR64B Gv,Mdqq (66) | ENQCMD Gv,Mdqq (F2) | ENQCMDS Gv,Mdqq (F3)
+f9: MOVDIRI My,Gy
EndTable
Table: 3-byte opcode 2 (0x0f 0x3a)
@@ -943,9 +945,9 @@ GrpTable: Grp6
EndTable
GrpTable: Grp7
-0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B)
-1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B)
-2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B)
+0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B) | PCONFIG (101),(11B) | ENCLV (000),(11B)
+1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B) | ENCLS (111),(11B)
+2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B) | ENCLU (111),(11B)
3: LIDT Ms
4: SMSW Mw/Rv
5: rdpkru (110),(11B) | wrpkru (111),(11B)
@@ -1020,7 +1022,7 @@ GrpTable: Grp15
3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B)
4: XSAVE | ptwrite Ey (F3),(11B)
5: XRSTOR | lfence (11B)
-6: XSAVEOPT | clwb (66) | mfence (11B)
+6: XSAVEOPT | clwb (66) | mfence (11B) | TPAUSE Rd (66),(11B) | UMONITOR Rv (F3),(11B) | UMWAIT Rd (F2),(11B)
7: clflush | clflushopt (66) | sfence (11B)
EndTable
@@ -1051,6 +1053,10 @@ GrpTable: Grp19
6: vscatterpf1qps/d Wx (66),(ev)
EndTable
+GrpTable: Grp20
+0: cldemote Mb
+EndTable
+
# AMD's Prefetch Group
GrpTable: GrpP
0: PREFETCH
diff --git a/tools/arch/x86/lib/x86-opcode-map.txt b/tools/arch/x86/lib/x86-opcode-map.txt
index e0b85930dd77..0a0e9112f284 100644
--- a/tools/arch/x86/lib/x86-opcode-map.txt
+++ b/tools/arch/x86/lib/x86-opcode-map.txt
@@ -333,7 +333,7 @@ AVXcode: 1
06: CLTS
07: SYSRET (o64)
08: INVD
-09: WBINVD
+09: WBINVD | WBNOINVD (F3)
0a:
0b: UD2 (1B)
0c:
@@ -364,7 +364,7 @@ AVXcode: 1
# a ModR/M byte.
1a: BNDCL Gv,Ev (F3) | BNDCU Gv,Ev (F2) | BNDMOV Gv,Ev (66) | BNDLDX Gv,Ev
1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv
-1c:
+1c: Grp20 (1A),(1C)
1d:
1e:
1f: NOP Ev
@@ -792,6 +792,8 @@ f3: Grp17 (1A)
f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v)
f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v)
f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v)
+f8: MOVDIR64B Gv,Mdqq (66) | ENQCMD Gv,Mdqq (F2) | ENQCMDS Gv,Mdqq (F3)
+f9: MOVDIRI My,Gy
EndTable
Table: 3-byte opcode 2 (0x0f 0x3a)
@@ -943,9 +945,9 @@ GrpTable: Grp6
EndTable
GrpTable: Grp7
-0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B)
-1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B)
-2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B)
+0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B) | PCONFIG (101),(11B) | ENCLV (000),(11B)
+1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B) | ENCLS (111),(11B)
+2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B) | ENCLU (111),(11B)
3: LIDT Ms
4: SMSW Mw/Rv
5: rdpkru (110),(11B) | wrpkru (111),(11B)
@@ -1020,7 +1022,7 @@ GrpTable: Grp15
3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B)
4: XSAVE | ptwrite Ey (F3),(11B)
5: XRSTOR | lfence (11B)
-6: XSAVEOPT | clwb (66) | mfence (11B)
+6: XSAVEOPT | clwb (66) | mfence (11B) | TPAUSE Rd (66),(11B) | UMONITOR Rv (F3),(11B) | UMWAIT Rd (F2),(11B)
7: clflush | clflushopt (66) | sfence (11B)
EndTable
@@ -1051,6 +1053,10 @@ GrpTable: Grp19
6: vscatterpf1qps/d Wx (66),(ev)
EndTable
+GrpTable: Grp20
+0: cldemote Mb
+EndTable
+
# AMD's Prefetch Group
GrpTable: GrpP
0: PREFETCH
--
2.17.1
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH 2/2] x86/insn: Add some Intel instructions to the opcode map
2019-11-15 13:54 ` [PATCH 2/2] x86/insn: Add some Intel instructions to the opcode map Adrian Hunter
@ 2019-11-18 11:40 ` Masami Hiramatsu
2019-11-18 21:55 ` Arnaldo Carvalho de Melo
2019-11-19 16:56 ` [tip: perf/core] " tip-bot2 for Adrian Hunter
1 sibling, 1 reply; 7+ messages in thread
From: Masami Hiramatsu @ 2019-11-18 11:40 UTC (permalink / raw)
To: Adrian Hunter
Cc: x86, Arnaldo Carvalho de Melo, Jiri Olsa, linux-kernel,
Thomas Gleixner, Ingo Molnar, Borislav Petkov, H Peter Anvin,
Andi Kleen, Peter Zijlstra, Masami Hiramatsu
Hi Adrian,
On Fri, 15 Nov 2019 15:54:47 +0200
Adrian Hunter <adrian.hunter@intel.com> wrote:
> Add to the opcode map the following instructions:
> cldemote
> tpause
> umonitor
> umwait
> movdiri
> movdir64b
> enqcmd
> enqcmds
> encls
> enclu
> enclv
> pconfig
> wbnoinvd
>
> For information about the instructions, refer Intel SDM May 2019
> (325462-070US) and Intel Architecture Instruction Set Extensions
> May 2019 (319433-037).
>
> The instruction decoding can be tested using the perf tools'
> "x86 instruction decoder - new instructions" test as folllows:
>
> $ perf test -v "new " 2>&1 | grep -i cldemote
> Decoded ok: 0f 1c 00 cldemote (%eax)
> Decoded ok: 0f 1c 05 78 56 34 12 cldemote 0x12345678
> Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%eax,%ecx,8)
> Decoded ok: 0f 1c 00 cldemote (%rax)
> Decoded ok: 41 0f 1c 00 cldemote (%r8)
> Decoded ok: 0f 1c 04 25 78 56 34 12 cldemote 0x12345678
> Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%rax,%rcx,8)
> Decoded ok: 41 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%r8,%rcx,8)
> $ perf test -v "new " 2>&1 | grep -i tpause
> Decoded ok: 66 0f ae f3 tpause %ebx
> Decoded ok: 66 0f ae f3 tpause %ebx
> Decoded ok: 66 41 0f ae f0 tpause %r8d
> $ perf test -v "new " 2>&1 | grep -i umonitor
> Decoded ok: 67 f3 0f ae f0 umonitor %ax
> Decoded ok: f3 0f ae f0 umonitor %eax
> Decoded ok: 67 f3 0f ae f0 umonitor %eax
> Decoded ok: f3 0f ae f0 umonitor %rax
> Decoded ok: 67 f3 41 0f ae f0 umonitor %r8d
> $ perf test -v "new " 2>&1 | grep -i umwait
> Decoded ok: f2 0f ae f0 umwait %eax
> Decoded ok: f2 0f ae f0 umwait %eax
> Decoded ok: f2 41 0f ae f0 umwait %r8d
> $ perf test -v "new " 2>&1 | grep -i movdiri
> Decoded ok: 0f 38 f9 03 movdiri %eax,(%ebx)
> Decoded ok: 0f 38 f9 88 78 56 34 12 movdiri %ecx,0x12345678(%eax)
> Decoded ok: 48 0f 38 f9 03 movdiri %rax,(%rbx)
> Decoded ok: 48 0f 38 f9 88 78 56 34 12 movdiri %rcx,0x12345678(%rax)
> $ perf test -v "new " 2>&1 | grep -i movdir64b
> Decoded ok: 66 0f 38 f8 18 movdir64b (%eax),%ebx
> Decoded ok: 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%eax),%ecx
> Decoded ok: 67 66 0f 38 f8 1c movdir64b (%si),%bx
> Decoded ok: 67 66 0f 38 f8 8c 34 12 movdir64b 0x1234(%si),%cx
> Decoded ok: 66 0f 38 f8 18 movdir64b (%rax),%rbx
> Decoded ok: 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%rax),%rcx
> Decoded ok: 67 66 0f 38 f8 18 movdir64b (%eax),%ebx
> Decoded ok: 67 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%eax),%ecx
> $ perf test -v "new " 2>&1 | grep -i enqcmd
> Decoded ok: f2 0f 38 f8 18 enqcmd (%eax),%ebx
> Decoded ok: f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%eax),%ecx
> Decoded ok: 67 f2 0f 38 f8 1c enqcmd (%si),%bx
> Decoded ok: 67 f2 0f 38 f8 8c 34 12 enqcmd 0x1234(%si),%cx
> Decoded ok: f3 0f 38 f8 18 enqcmds (%eax),%ebx
> Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx
> Decoded ok: 67 f3 0f 38 f8 1c enqcmds (%si),%bx
> Decoded ok: 67 f3 0f 38 f8 8c 34 12 enqcmds 0x1234(%si),%cx
> Decoded ok: f2 0f 38 f8 18 enqcmd (%rax),%rbx
> Decoded ok: f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%rax),%rcx
> Decoded ok: 67 f2 0f 38 f8 18 enqcmd (%eax),%ebx
> Decoded ok: 67 f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%eax),%ecx
> Decoded ok: f3 0f 38 f8 18 enqcmds (%rax),%rbx
> Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%rax),%rcx
> Decoded ok: 67 f3 0f 38 f8 18 enqcmds (%eax),%ebx
> Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx
> $ perf test -v "new " 2>&1 | grep -i enqcmds
> Decoded ok: f3 0f 38 f8 18 enqcmds (%eax),%ebx
> Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx
> Decoded ok: 67 f3 0f 38 f8 1c enqcmds (%si),%bx
> Decoded ok: 67 f3 0f 38 f8 8c 34 12 enqcmds 0x1234(%si),%cx
> Decoded ok: f3 0f 38 f8 18 enqcmds (%rax),%rbx
> Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%rax),%rcx
> Decoded ok: 67 f3 0f 38 f8 18 enqcmds (%eax),%ebx
> Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx
> $ perf test -v "new " 2>&1 | grep -i encls
> Decoded ok: 0f 01 cf encls
> Decoded ok: 0f 01 cf encls
> $ perf test -v "new " 2>&1 | grep -i enclu
> Decoded ok: 0f 01 d7 enclu
> Decoded ok: 0f 01 d7 enclu
> $ perf test -v "new " 2>&1 | grep -i enclv
> Decoded ok: 0f 01 c0 enclv
> Decoded ok: 0f 01 c0 enclv
> $ perf test -v "new " 2>&1 | grep -i pconfig
> Decoded ok: 0f 01 c5 pconfig
> Decoded ok: 0f 01 c5 pconfig
> $ perf test -v "new " 2>&1 | grep -i wbnoinvd
> Decoded ok: f3 0f 09 wbnoinvd
> Decoded ok: f3 0f 09 wbnoinvd
>
Thanks for updating it!
This looks good to me.
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
> Reviewed-by: Andi Kleen <ak@linux.intel.com>
> ---
> arch/x86/lib/x86-opcode-map.txt | 18 ++++++++++++------
> tools/arch/x86/lib/x86-opcode-map.txt | 18 ++++++++++++------
> 2 files changed, 24 insertions(+), 12 deletions(-)
>
> diff --git a/arch/x86/lib/x86-opcode-map.txt b/arch/x86/lib/x86-opcode-map.txt
> index e0b85930dd77..0a0e9112f284 100644
> --- a/arch/x86/lib/x86-opcode-map.txt
> +++ b/arch/x86/lib/x86-opcode-map.txt
> @@ -333,7 +333,7 @@ AVXcode: 1
> 06: CLTS
> 07: SYSRET (o64)
> 08: INVD
> -09: WBINVD
> +09: WBINVD | WBNOINVD (F3)
> 0a:
> 0b: UD2 (1B)
> 0c:
> @@ -364,7 +364,7 @@ AVXcode: 1
> # a ModR/M byte.
> 1a: BNDCL Gv,Ev (F3) | BNDCU Gv,Ev (F2) | BNDMOV Gv,Ev (66) | BNDLDX Gv,Ev
> 1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv
> -1c:
> +1c: Grp20 (1A),(1C)
> 1d:
> 1e:
> 1f: NOP Ev
> @@ -792,6 +792,8 @@ f3: Grp17 (1A)
> f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v)
> f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v)
> f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v)
> +f8: MOVDIR64B Gv,Mdqq (66) | ENQCMD Gv,Mdqq (F2) | ENQCMDS Gv,Mdqq (F3)
> +f9: MOVDIRI My,Gy
> EndTable
>
> Table: 3-byte opcode 2 (0x0f 0x3a)
> @@ -943,9 +945,9 @@ GrpTable: Grp6
> EndTable
>
> GrpTable: Grp7
> -0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B)
> -1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B)
> -2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B)
> +0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B) | PCONFIG (101),(11B) | ENCLV (000),(11B)
> +1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B) | ENCLS (111),(11B)
> +2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B) | ENCLU (111),(11B)
> 3: LIDT Ms
> 4: SMSW Mw/Rv
> 5: rdpkru (110),(11B) | wrpkru (111),(11B)
> @@ -1020,7 +1022,7 @@ GrpTable: Grp15
> 3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B)
> 4: XSAVE | ptwrite Ey (F3),(11B)
> 5: XRSTOR | lfence (11B)
> -6: XSAVEOPT | clwb (66) | mfence (11B)
> +6: XSAVEOPT | clwb (66) | mfence (11B) | TPAUSE Rd (66),(11B) | UMONITOR Rv (F3),(11B) | UMWAIT Rd (F2),(11B)
> 7: clflush | clflushopt (66) | sfence (11B)
> EndTable
>
> @@ -1051,6 +1053,10 @@ GrpTable: Grp19
> 6: vscatterpf1qps/d Wx (66),(ev)
> EndTable
>
> +GrpTable: Grp20
> +0: cldemote Mb
> +EndTable
> +
> # AMD's Prefetch Group
> GrpTable: GrpP
> 0: PREFETCH
> diff --git a/tools/arch/x86/lib/x86-opcode-map.txt b/tools/arch/x86/lib/x86-opcode-map.txt
> index e0b85930dd77..0a0e9112f284 100644
> --- a/tools/arch/x86/lib/x86-opcode-map.txt
> +++ b/tools/arch/x86/lib/x86-opcode-map.txt
> @@ -333,7 +333,7 @@ AVXcode: 1
> 06: CLTS
> 07: SYSRET (o64)
> 08: INVD
> -09: WBINVD
> +09: WBINVD | WBNOINVD (F3)
> 0a:
> 0b: UD2 (1B)
> 0c:
> @@ -364,7 +364,7 @@ AVXcode: 1
> # a ModR/M byte.
> 1a: BNDCL Gv,Ev (F3) | BNDCU Gv,Ev (F2) | BNDMOV Gv,Ev (66) | BNDLDX Gv,Ev
> 1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv
> -1c:
> +1c: Grp20 (1A),(1C)
> 1d:
> 1e:
> 1f: NOP Ev
> @@ -792,6 +792,8 @@ f3: Grp17 (1A)
> f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v)
> f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v)
> f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v)
> +f8: MOVDIR64B Gv,Mdqq (66) | ENQCMD Gv,Mdqq (F2) | ENQCMDS Gv,Mdqq (F3)
> +f9: MOVDIRI My,Gy
> EndTable
>
> Table: 3-byte opcode 2 (0x0f 0x3a)
> @@ -943,9 +945,9 @@ GrpTable: Grp6
> EndTable
>
> GrpTable: Grp7
> -0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B)
> -1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B)
> -2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B)
> +0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B) | PCONFIG (101),(11B) | ENCLV (000),(11B)
> +1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B) | ENCLS (111),(11B)
> +2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B) | ENCLU (111),(11B)
> 3: LIDT Ms
> 4: SMSW Mw/Rv
> 5: rdpkru (110),(11B) | wrpkru (111),(11B)
> @@ -1020,7 +1022,7 @@ GrpTable: Grp15
> 3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B)
> 4: XSAVE | ptwrite Ey (F3),(11B)
> 5: XRSTOR | lfence (11B)
> -6: XSAVEOPT | clwb (66) | mfence (11B)
> +6: XSAVEOPT | clwb (66) | mfence (11B) | TPAUSE Rd (66),(11B) | UMONITOR Rv (F3),(11B) | UMWAIT Rd (F2),(11B)
> 7: clflush | clflushopt (66) | sfence (11B)
> EndTable
>
> @@ -1051,6 +1053,10 @@ GrpTable: Grp19
> 6: vscatterpf1qps/d Wx (66),(ev)
> EndTable
>
> +GrpTable: Grp20
> +0: cldemote Mb
> +EndTable
> +
> # AMD's Prefetch Group
> GrpTable: GrpP
> 0: PREFETCH
> --
> 2.17.1
>
--
Masami Hiramatsu <mhiramat@kernel.org>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH 2/2] x86/insn: Add some Intel instructions to the opcode map
2019-11-18 11:40 ` Masami Hiramatsu
@ 2019-11-18 21:55 ` Arnaldo Carvalho de Melo
0 siblings, 0 replies; 7+ messages in thread
From: Arnaldo Carvalho de Melo @ 2019-11-18 21:55 UTC (permalink / raw)
To: Masami Hiramatsu
Cc: Adrian Hunter, x86, Jiri Olsa, linux-kernel, Thomas Gleixner,
Ingo Molnar, Borislav Petkov, H Peter Anvin, Andi Kleen,
Peter Zijlstra
Em Mon, Nov 18, 2019 at 08:40:45PM +0900, Masami Hiramatsu escreveu:
> Hi Adrian,
>
> On Fri, 15 Nov 2019 15:54:47 +0200
> Adrian Hunter <adrian.hunter@intel.com> wrote:
>
>
> Thanks for updating it!
> This looks good to me.
>
> Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
>
> > Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
> > Reviewed-by: Andi Kleen <ak@linux.intel.com>
Thanks, applied both patches,
- Arnaldo
^ permalink raw reply [flat|nested] 7+ messages in thread
* [tip: perf/core] x86/insn: Add some Intel instructions to the opcode map
2019-11-15 13:54 ` [PATCH 2/2] x86/insn: Add some Intel instructions to the opcode map Adrian Hunter
2019-11-18 11:40 ` Masami Hiramatsu
@ 2019-11-19 16:56 ` tip-bot2 for Adrian Hunter
1 sibling, 0 replies; 7+ messages in thread
From: tip-bot2 for Adrian Hunter @ 2019-11-19 16:56 UTC (permalink / raw)
To: linux-tip-commits
Cc: Adrian Hunter, Andi Kleen, Masami Hiramatsu, Borislav Petkov,
H. Peter Anvin, Jiri Olsa, Peter Zijlstra, Thomas Gleixner, x86,
Arnaldo Carvalho de Melo, Ingo Molnar, linux-kernel
The following commit has been merged into the perf/core branch of tip:
Commit-ID: b980be189c9badba50634671e2303e92bf28e35a
Gitweb: https://git.kernel.org/tip/b980be189c9badba50634671e2303e92bf28e35a
Author: Adrian Hunter <adrian.hunter@intel.com>
AuthorDate: Fri, 15 Nov 2019 15:54:47 +02:00
Committer: Arnaldo Carvalho de Melo <acme@redhat.com>
CommitterDate: Mon, 18 Nov 2019 18:54:45 -03:00
x86/insn: Add some Intel instructions to the opcode map
Add to the opcode map the following instructions:
cldemote
tpause
umonitor
umwait
movdiri
movdir64b
enqcmd
enqcmds
encls
enclu
enclv
pconfig
wbnoinvd
For information about the instructions, refer Intel SDM May 2019
(325462-070US) and Intel Architecture Instruction Set Extensions
May 2019 (319433-037).
The instruction decoding can be tested using the perf tools'
"x86 instruction decoder - new instructions" test as folllows:
$ perf test -v "new " 2>&1 | grep -i cldemote
Decoded ok: 0f 1c 00 cldemote (%eax)
Decoded ok: 0f 1c 05 78 56 34 12 cldemote 0x12345678
Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%eax,%ecx,8)
Decoded ok: 0f 1c 00 cldemote (%rax)
Decoded ok: 41 0f 1c 00 cldemote (%r8)
Decoded ok: 0f 1c 04 25 78 56 34 12 cldemote 0x12345678
Decoded ok: 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%rax,%rcx,8)
Decoded ok: 41 0f 1c 84 c8 78 56 34 12 cldemote 0x12345678(%r8,%rcx,8)
$ perf test -v "new " 2>&1 | grep -i tpause
Decoded ok: 66 0f ae f3 tpause %ebx
Decoded ok: 66 0f ae f3 tpause %ebx
Decoded ok: 66 41 0f ae f0 tpause %r8d
$ perf test -v "new " 2>&1 | grep -i umonitor
Decoded ok: 67 f3 0f ae f0 umonitor %ax
Decoded ok: f3 0f ae f0 umonitor %eax
Decoded ok: 67 f3 0f ae f0 umonitor %eax
Decoded ok: f3 0f ae f0 umonitor %rax
Decoded ok: 67 f3 41 0f ae f0 umonitor %r8d
$ perf test -v "new " 2>&1 | grep -i umwait
Decoded ok: f2 0f ae f0 umwait %eax
Decoded ok: f2 0f ae f0 umwait %eax
Decoded ok: f2 41 0f ae f0 umwait %r8d
$ perf test -v "new " 2>&1 | grep -i movdiri
Decoded ok: 0f 38 f9 03 movdiri %eax,(%ebx)
Decoded ok: 0f 38 f9 88 78 56 34 12 movdiri %ecx,0x12345678(%eax)
Decoded ok: 48 0f 38 f9 03 movdiri %rax,(%rbx)
Decoded ok: 48 0f 38 f9 88 78 56 34 12 movdiri %rcx,0x12345678(%rax)
$ perf test -v "new " 2>&1 | grep -i movdir64b
Decoded ok: 66 0f 38 f8 18 movdir64b (%eax),%ebx
Decoded ok: 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%eax),%ecx
Decoded ok: 67 66 0f 38 f8 1c movdir64b (%si),%bx
Decoded ok: 67 66 0f 38 f8 8c 34 12 movdir64b 0x1234(%si),%cx
Decoded ok: 66 0f 38 f8 18 movdir64b (%rax),%rbx
Decoded ok: 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%rax),%rcx
Decoded ok: 67 66 0f 38 f8 18 movdir64b (%eax),%ebx
Decoded ok: 67 66 0f 38 f8 88 78 56 34 12 movdir64b 0x12345678(%eax),%ecx
$ perf test -v "new " 2>&1 | grep -i enqcmd
Decoded ok: f2 0f 38 f8 18 enqcmd (%eax),%ebx
Decoded ok: f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%eax),%ecx
Decoded ok: 67 f2 0f 38 f8 1c enqcmd (%si),%bx
Decoded ok: 67 f2 0f 38 f8 8c 34 12 enqcmd 0x1234(%si),%cx
Decoded ok: f3 0f 38 f8 18 enqcmds (%eax),%ebx
Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx
Decoded ok: 67 f3 0f 38 f8 1c enqcmds (%si),%bx
Decoded ok: 67 f3 0f 38 f8 8c 34 12 enqcmds 0x1234(%si),%cx
Decoded ok: f2 0f 38 f8 18 enqcmd (%rax),%rbx
Decoded ok: f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%rax),%rcx
Decoded ok: 67 f2 0f 38 f8 18 enqcmd (%eax),%ebx
Decoded ok: 67 f2 0f 38 f8 88 78 56 34 12 enqcmd 0x12345678(%eax),%ecx
Decoded ok: f3 0f 38 f8 18 enqcmds (%rax),%rbx
Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%rax),%rcx
Decoded ok: 67 f3 0f 38 f8 18 enqcmds (%eax),%ebx
Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx
$ perf test -v "new " 2>&1 | grep -i enqcmds
Decoded ok: f3 0f 38 f8 18 enqcmds (%eax),%ebx
Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx
Decoded ok: 67 f3 0f 38 f8 1c enqcmds (%si),%bx
Decoded ok: 67 f3 0f 38 f8 8c 34 12 enqcmds 0x1234(%si),%cx
Decoded ok: f3 0f 38 f8 18 enqcmds (%rax),%rbx
Decoded ok: f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%rax),%rcx
Decoded ok: 67 f3 0f 38 f8 18 enqcmds (%eax),%ebx
Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12 enqcmds 0x12345678(%eax),%ecx
$ perf test -v "new " 2>&1 | grep -i encls
Decoded ok: 0f 01 cf encls
Decoded ok: 0f 01 cf encls
$ perf test -v "new " 2>&1 | grep -i enclu
Decoded ok: 0f 01 d7 enclu
Decoded ok: 0f 01 d7 enclu
$ perf test -v "new " 2>&1 | grep -i enclv
Decoded ok: 0f 01 c0 enclv
Decoded ok: 0f 01 c0 enclv
$ perf test -v "new " 2>&1 | grep -i pconfig
Decoded ok: 0f 01 c5 pconfig
Decoded ok: 0f 01 c5 pconfig
$ perf test -v "new " 2>&1 | grep -i wbnoinvd
Decoded ok: f3 0f 09 wbnoinvd
Decoded ok: f3 0f 09 wbnoinvd
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20191115135447.6519-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
arch/x86/lib/x86-opcode-map.txt | 18 ++++++++++++------
tools/arch/x86/lib/x86-opcode-map.txt | 18 ++++++++++++------
2 files changed, 24 insertions(+), 12 deletions(-)
diff --git a/arch/x86/lib/x86-opcode-map.txt b/arch/x86/lib/x86-opcode-map.txt
index e0b8593..0a0e911 100644
--- a/arch/x86/lib/x86-opcode-map.txt
+++ b/arch/x86/lib/x86-opcode-map.txt
@@ -333,7 +333,7 @@ AVXcode: 1
06: CLTS
07: SYSRET (o64)
08: INVD
-09: WBINVD
+09: WBINVD | WBNOINVD (F3)
0a:
0b: UD2 (1B)
0c:
@@ -364,7 +364,7 @@ AVXcode: 1
# a ModR/M byte.
1a: BNDCL Gv,Ev (F3) | BNDCU Gv,Ev (F2) | BNDMOV Gv,Ev (66) | BNDLDX Gv,Ev
1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv
-1c:
+1c: Grp20 (1A),(1C)
1d:
1e:
1f: NOP Ev
@@ -792,6 +792,8 @@ f3: Grp17 (1A)
f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v)
f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v)
f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v)
+f8: MOVDIR64B Gv,Mdqq (66) | ENQCMD Gv,Mdqq (F2) | ENQCMDS Gv,Mdqq (F3)
+f9: MOVDIRI My,Gy
EndTable
Table: 3-byte opcode 2 (0x0f 0x3a)
@@ -943,9 +945,9 @@ GrpTable: Grp6
EndTable
GrpTable: Grp7
-0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B)
-1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B)
-2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B)
+0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B) | PCONFIG (101),(11B) | ENCLV (000),(11B)
+1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B) | ENCLS (111),(11B)
+2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B) | ENCLU (111),(11B)
3: LIDT Ms
4: SMSW Mw/Rv
5: rdpkru (110),(11B) | wrpkru (111),(11B)
@@ -1020,7 +1022,7 @@ GrpTable: Grp15
3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B)
4: XSAVE | ptwrite Ey (F3),(11B)
5: XRSTOR | lfence (11B)
-6: XSAVEOPT | clwb (66) | mfence (11B)
+6: XSAVEOPT | clwb (66) | mfence (11B) | TPAUSE Rd (66),(11B) | UMONITOR Rv (F3),(11B) | UMWAIT Rd (F2),(11B)
7: clflush | clflushopt (66) | sfence (11B)
EndTable
@@ -1051,6 +1053,10 @@ GrpTable: Grp19
6: vscatterpf1qps/d Wx (66),(ev)
EndTable
+GrpTable: Grp20
+0: cldemote Mb
+EndTable
+
# AMD's Prefetch Group
GrpTable: GrpP
0: PREFETCH
diff --git a/tools/arch/x86/lib/x86-opcode-map.txt b/tools/arch/x86/lib/x86-opcode-map.txt
index e0b8593..0a0e911 100644
--- a/tools/arch/x86/lib/x86-opcode-map.txt
+++ b/tools/arch/x86/lib/x86-opcode-map.txt
@@ -333,7 +333,7 @@ AVXcode: 1
06: CLTS
07: SYSRET (o64)
08: INVD
-09: WBINVD
+09: WBINVD | WBNOINVD (F3)
0a:
0b: UD2 (1B)
0c:
@@ -364,7 +364,7 @@ AVXcode: 1
# a ModR/M byte.
1a: BNDCL Gv,Ev (F3) | BNDCU Gv,Ev (F2) | BNDMOV Gv,Ev (66) | BNDLDX Gv,Ev
1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv
-1c:
+1c: Grp20 (1A),(1C)
1d:
1e:
1f: NOP Ev
@@ -792,6 +792,8 @@ f3: Grp17 (1A)
f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v)
f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v)
f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v)
+f8: MOVDIR64B Gv,Mdqq (66) | ENQCMD Gv,Mdqq (F2) | ENQCMDS Gv,Mdqq (F3)
+f9: MOVDIRI My,Gy
EndTable
Table: 3-byte opcode 2 (0x0f 0x3a)
@@ -943,9 +945,9 @@ GrpTable: Grp6
EndTable
GrpTable: Grp7
-0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B)
-1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B)
-2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B)
+0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B) | PCONFIG (101),(11B) | ENCLV (000),(11B)
+1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B) | ENCLS (111),(11B)
+2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B) | ENCLU (111),(11B)
3: LIDT Ms
4: SMSW Mw/Rv
5: rdpkru (110),(11B) | wrpkru (111),(11B)
@@ -1020,7 +1022,7 @@ GrpTable: Grp15
3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B)
4: XSAVE | ptwrite Ey (F3),(11B)
5: XRSTOR | lfence (11B)
-6: XSAVEOPT | clwb (66) | mfence (11B)
+6: XSAVEOPT | clwb (66) | mfence (11B) | TPAUSE Rd (66),(11B) | UMONITOR Rv (F3),(11B) | UMWAIT Rd (F2),(11B)
7: clflush | clflushopt (66) | sfence (11B)
EndTable
@@ -1051,6 +1053,10 @@ GrpTable: Grp19
6: vscatterpf1qps/d Wx (66),(ev)
EndTable
+GrpTable: Grp20
+0: cldemote Mb
+EndTable
+
# AMD's Prefetch Group
GrpTable: GrpP
0: PREFETCH
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [tip: perf/core] x86/insn: perf tools: Add some instructions to the new instructions test
2019-11-15 13:54 ` [PATCH 1/2] x86/insn: perf tools: Add some instructions to the new instructions test Adrian Hunter
@ 2019-11-19 16:56 ` tip-bot2 for Adrian Hunter
0 siblings, 0 replies; 7+ messages in thread
From: tip-bot2 for Adrian Hunter @ 2019-11-19 16:56 UTC (permalink / raw)
To: linux-tip-commits
Cc: Adrian Hunter, Andi Kleen, Borislav Petkov, H. Peter Anvin,
Jiri Olsa, Masami Hiramatsu, Peter Zijlstra, Thomas Gleixner,
x86, Arnaldo Carvalho de Melo, Ingo Molnar, linux-kernel
The following commit has been merged into the perf/core branch of tip:
Commit-ID: 1e5f015442e7b700941f8cd0274bb14962b3d78e
Gitweb: https://git.kernel.org/tip/1e5f015442e7b700941f8cd0274bb14962b3d78e
Author: Adrian Hunter <adrian.hunter@intel.com>
AuthorDate: Fri, 15 Nov 2019 15:54:46 +02:00
Committer: Arnaldo Carvalho de Melo <acme@redhat.com>
CommitterDate: Mon, 18 Nov 2019 18:53:54 -03:00
x86/insn: perf tools: Add some instructions to the new instructions test
Add to the "x86 instruction decoder - new instructions" test the following
instructions:
cldemote
tpause
umonitor
umwait
movdiri
movdir64b
enqcmd
enqcmds
encls
enclu
enclv
pconfig
wbnoinvd
For information about the instructions, refer Intel SDM May 2019
(325462-070US) and Intel Architecture Instruction Set Extensions
May 2019 (319433-037).
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20191115135447.6519-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
tools/perf/arch/x86/tests/insn-x86-dat-32.c | 52 +++++++++-
tools/perf/arch/x86/tests/insn-x86-dat-64.c | 62 ++++++++++-
tools/perf/arch/x86/tests/insn-x86-dat-src.c | 109 ++++++++++++++++++-
3 files changed, 223 insertions(+)
diff --git a/tools/perf/arch/x86/tests/insn-x86-dat-32.c b/tools/perf/arch/x86/tests/insn-x86-dat-32.c
index fab3c6d..58f8f2a 100644
--- a/tools/perf/arch/x86/tests/insn-x86-dat-32.c
+++ b/tools/perf/arch/x86/tests/insn-x86-dat-32.c
@@ -1647,6 +1647,12 @@
"0f ae 30 \txsaveopt (%eax)",},
{{0x0f, 0xae, 0xf0, }, 3, 0, "", "",
"0f ae f0 \tmfence ",},
+{{0x0f, 0x1c, 0x00, }, 3, 0, "", "",
+"0f 1c 00 \tcldemote (%eax)",},
+{{0x0f, 0x1c, 0x05, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "", "",
+"0f 1c 05 78 56 34 12 \tcldemote 0x12345678",},
+{{0x0f, 0x1c, 0x84, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "",
+"0f 1c 84 c8 78 56 34 12 \tcldemote 0x12345678(%eax,%ecx,8)",},
{{0x0f, 0xc7, 0x20, }, 3, 0, "", "",
"0f c7 20 \txsavec (%eax)",},
{{0x0f, 0xc7, 0x25, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "", "",
@@ -1677,3 +1683,49 @@
"f3 0f ae 25 78 56 34 12 \tptwritel 0x12345678",},
{{0xf3, 0x0f, 0xae, 0xa4, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
"f3 0f ae a4 c8 78 56 34 12 \tptwritel 0x12345678(%eax,%ecx,8)",},
+{{0x66, 0x0f, 0xae, 0xf3, }, 4, 0, "", "",
+"66 0f ae f3 \ttpause %ebx",},
+{{0x67, 0xf3, 0x0f, 0xae, 0xf0, }, 5, 0, "", "",
+"67 f3 0f ae f0 \tumonitor %ax",},
+{{0xf3, 0x0f, 0xae, 0xf0, }, 4, 0, "", "",
+"f3 0f ae f0 \tumonitor %eax",},
+{{0xf2, 0x0f, 0xae, 0xf0, }, 4, 0, "", "",
+"f2 0f ae f0 \tumwait %eax",},
+{{0x0f, 0x38, 0xf9, 0x03, }, 4, 0, "", "",
+"0f 38 f9 03 \tmovdiri %eax,(%ebx)",},
+{{0x0f, 0x38, 0xf9, 0x88, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "",
+"0f 38 f9 88 78 56 34 12 \tmovdiri %ecx,0x12345678(%eax)",},
+{{0x66, 0x0f, 0x38, 0xf8, 0x18, }, 5, 0, "", "",
+"66 0f 38 f8 18 \tmovdir64b (%eax),%ebx",},
+{{0x66, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
+"66 0f 38 f8 88 78 56 34 12 \tmovdir64b 0x12345678(%eax),%ecx",},
+{{0x67, 0x66, 0x0f, 0x38, 0xf8, 0x1c, }, 6, 0, "", "",
+"67 66 0f 38 f8 1c \tmovdir64b (%si),%bx",},
+{{0x67, 0x66, 0x0f, 0x38, 0xf8, 0x8c, 0x34, 0x12, }, 8, 0, "", "",
+"67 66 0f 38 f8 8c 34 12 \tmovdir64b 0x1234(%si),%cx",},
+{{0xf2, 0x0f, 0x38, 0xf8, 0x18, }, 5, 0, "", "",
+"f2 0f 38 f8 18 \tenqcmd (%eax),%ebx",},
+{{0xf2, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
+"f2 0f 38 f8 88 78 56 34 12 \tenqcmd 0x12345678(%eax),%ecx",},
+{{0x67, 0xf2, 0x0f, 0x38, 0xf8, 0x1c, }, 6, 0, "", "",
+"67 f2 0f 38 f8 1c \tenqcmd (%si),%bx",},
+{{0x67, 0xf2, 0x0f, 0x38, 0xf8, 0x8c, 0x34, 0x12, }, 8, 0, "", "",
+"67 f2 0f 38 f8 8c 34 12 \tenqcmd 0x1234(%si),%cx",},
+{{0xf3, 0x0f, 0x38, 0xf8, 0x18, }, 5, 0, "", "",
+"f3 0f 38 f8 18 \tenqcmds (%eax),%ebx",},
+{{0xf3, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
+"f3 0f 38 f8 88 78 56 34 12 \tenqcmds 0x12345678(%eax),%ecx",},
+{{0x67, 0xf3, 0x0f, 0x38, 0xf8, 0x1c, }, 6, 0, "", "",
+"67 f3 0f 38 f8 1c \tenqcmds (%si),%bx",},
+{{0x67, 0xf3, 0x0f, 0x38, 0xf8, 0x8c, 0x34, 0x12, }, 8, 0, "", "",
+"67 f3 0f 38 f8 8c 34 12 \tenqcmds 0x1234(%si),%cx",},
+{{0x0f, 0x01, 0xcf, }, 3, 0, "", "",
+"0f 01 cf \tencls ",},
+{{0x0f, 0x01, 0xd7, }, 3, 0, "", "",
+"0f 01 d7 \tenclu ",},
+{{0x0f, 0x01, 0xc0, }, 3, 0, "", "",
+"0f 01 c0 \tenclv ",},
+{{0x0f, 0x01, 0xc5, }, 3, 0, "", "",
+"0f 01 c5 \tpconfig ",},
+{{0xf3, 0x0f, 0x09, }, 3, 0, "", "",
+"f3 0f 09 \twbnoinvd ",},
diff --git a/tools/perf/arch/x86/tests/insn-x86-dat-64.c b/tools/perf/arch/x86/tests/insn-x86-dat-64.c
index c57f346..656f8ae 100644
--- a/tools/perf/arch/x86/tests/insn-x86-dat-64.c
+++ b/tools/perf/arch/x86/tests/insn-x86-dat-64.c
@@ -1667,6 +1667,16 @@
"41 0f ae 30 \txsaveopt (%r8)",},
{{0x0f, 0xae, 0xf0, }, 3, 0, "", "",
"0f ae f0 \tmfence ",},
+{{0x0f, 0x1c, 0x00, }, 3, 0, "", "",
+"0f 1c 00 \tcldemote (%rax)",},
+{{0x41, 0x0f, 0x1c, 0x00, }, 4, 0, "", "",
+"41 0f 1c 00 \tcldemote (%r8)",},
+{{0x0f, 0x1c, 0x04, 0x25, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "",
+"0f 1c 04 25 78 56 34 12 \tcldemote 0x12345678",},
+{{0x0f, 0x1c, 0x84, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "",
+"0f 1c 84 c8 78 56 34 12 \tcldemote 0x12345678(%rax,%rcx,8)",},
+{{0x41, 0x0f, 0x1c, 0x84, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
+"41 0f 1c 84 c8 78 56 34 12 \tcldemote 0x12345678(%r8,%rcx,8)",},
{{0x0f, 0xc7, 0x20, }, 3, 0, "", "",
"0f c7 20 \txsavec (%rax)",},
{{0x41, 0x0f, 0xc7, 0x20, }, 4, 0, "", "",
@@ -1727,3 +1737,55 @@
"f3 48 0f ae a4 c8 78 56 34 12 \tptwriteq 0x12345678(%rax,%rcx,8)",},
{{0xf3, 0x49, 0x0f, 0xae, 0xa4, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 10, 0, "", "",
"f3 49 0f ae a4 c8 78 56 34 12 \tptwriteq 0x12345678(%r8,%rcx,8)",},
+{{0x66, 0x0f, 0xae, 0xf3, }, 4, 0, "", "",
+"66 0f ae f3 \ttpause %ebx",},
+{{0x66, 0x41, 0x0f, 0xae, 0xf0, }, 5, 0, "", "",
+"66 41 0f ae f0 \ttpause %r8d",},
+{{0x67, 0xf3, 0x0f, 0xae, 0xf0, }, 5, 0, "", "",
+"67 f3 0f ae f0 \tumonitor %eax",},
+{{0xf3, 0x0f, 0xae, 0xf0, }, 4, 0, "", "",
+"f3 0f ae f0 \tumonitor %rax",},
+{{0x67, 0xf3, 0x41, 0x0f, 0xae, 0xf0, }, 6, 0, "", "",
+"67 f3 41 0f ae f0 \tumonitor %r8d",},
+{{0xf2, 0x0f, 0xae, 0xf0, }, 4, 0, "", "",
+"f2 0f ae f0 \tumwait %eax",},
+{{0xf2, 0x41, 0x0f, 0xae, 0xf0, }, 5, 0, "", "",
+"f2 41 0f ae f0 \tumwait %r8d",},
+{{0x48, 0x0f, 0x38, 0xf9, 0x03, }, 5, 0, "", "",
+"48 0f 38 f9 03 \tmovdiri %rax,(%rbx)",},
+{{0x48, 0x0f, 0x38, 0xf9, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
+"48 0f 38 f9 88 78 56 34 12 \tmovdiri %rcx,0x12345678(%rax)",},
+{{0x66, 0x0f, 0x38, 0xf8, 0x18, }, 5, 0, "", "",
+"66 0f 38 f8 18 \tmovdir64b (%rax),%rbx",},
+{{0x66, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
+"66 0f 38 f8 88 78 56 34 12 \tmovdir64b 0x12345678(%rax),%rcx",},
+{{0x67, 0x66, 0x0f, 0x38, 0xf8, 0x18, }, 6, 0, "", "",
+"67 66 0f 38 f8 18 \tmovdir64b (%eax),%ebx",},
+{{0x67, 0x66, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 10, 0, "", "",
+"67 66 0f 38 f8 88 78 56 34 12 \tmovdir64b 0x12345678(%eax),%ecx",},
+{{0xf2, 0x0f, 0x38, 0xf8, 0x18, }, 5, 0, "", "",
+"f2 0f 38 f8 18 \tenqcmd (%rax),%rbx",},
+{{0xf2, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
+"f2 0f 38 f8 88 78 56 34 12 \tenqcmd 0x12345678(%rax),%rcx",},
+{{0x67, 0xf2, 0x0f, 0x38, 0xf8, 0x18, }, 6, 0, "", "",
+"67 f2 0f 38 f8 18 \tenqcmd (%eax),%ebx",},
+{{0x67, 0xf2, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 10, 0, "", "",
+"67 f2 0f 38 f8 88 78 56 34 12 \tenqcmd 0x12345678(%eax),%ecx",},
+{{0xf3, 0x0f, 0x38, 0xf8, 0x18, }, 5, 0, "", "",
+"f3 0f 38 f8 18 \tenqcmds (%rax),%rbx",},
+{{0xf3, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
+"f3 0f 38 f8 88 78 56 34 12 \tenqcmds 0x12345678(%rax),%rcx",},
+{{0x67, 0xf3, 0x0f, 0x38, 0xf8, 0x18, }, 6, 0, "", "",
+"67 f3 0f 38 f8 18 \tenqcmds (%eax),%ebx",},
+{{0x67, 0xf3, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 10, 0, "", "",
+"67 f3 0f 38 f8 88 78 56 34 12 \tenqcmds 0x12345678(%eax),%ecx",},
+{{0x0f, 0x01, 0xcf, }, 3, 0, "", "",
+"0f 01 cf \tencls ",},
+{{0x0f, 0x01, 0xd7, }, 3, 0, "", "",
+"0f 01 d7 \tenclu ",},
+{{0x0f, 0x01, 0xc0, }, 3, 0, "", "",
+"0f 01 c0 \tenclv ",},
+{{0x0f, 0x01, 0xc5, }, 3, 0, "", "",
+"0f 01 c5 \tpconfig ",},
+{{0xf3, 0x0f, 0x09, }, 3, 0, "", "",
+"f3 0f 09 \twbnoinvd ",},
diff --git a/tools/perf/arch/x86/tests/insn-x86-dat-src.c b/tools/perf/arch/x86/tests/insn-x86-dat-src.c
index 891415b..dd85a3a 100644
--- a/tools/perf/arch/x86/tests/insn-x86-dat-src.c
+++ b/tools/perf/arch/x86/tests/insn-x86-dat-src.c
@@ -1320,6 +1320,14 @@ int main(void)
asm volatile("xsaveopt (%r8)");
asm volatile("mfence");
+ /* cldemote m8 */
+
+ asm volatile("cldemote (%rax)");
+ asm volatile("cldemote (%r8)");
+ asm volatile("cldemote (0x12345678)");
+ asm volatile("cldemote 0x12345678(%rax,%rcx,8)");
+ asm volatile("cldemote 0x12345678(%r8,%rcx,8)");
+
/* xsavec mem */
asm volatile("xsavec (%rax)");
@@ -1364,6 +1372,48 @@ int main(void)
asm volatile("ptwriteq 0x12345678(%rax,%rcx,8)");
asm volatile("ptwriteq 0x12345678(%r8,%rcx,8)");
+ /* tpause */
+
+ asm volatile("tpause %ebx");
+ asm volatile("tpause %r8d");
+
+ /* umonitor */
+
+ asm volatile("umonitor %eax");
+ asm volatile("umonitor %rax");
+ asm volatile("umonitor %r8d");
+
+ /* umwait */
+
+ asm volatile("umwait %eax");
+ asm volatile("umwait %r8d");
+
+ /* movdiri */
+
+ asm volatile("movdiri %rax,(%rbx)");
+ asm volatile("movdiri %rcx,0x12345678(%rax)");
+
+ /* movdir64b */
+
+ asm volatile("movdir64b (%rax),%rbx");
+ asm volatile("movdir64b 0x12345678(%rax),%rcx");
+ asm volatile("movdir64b (%eax),%ebx");
+ asm volatile("movdir64b 0x12345678(%eax),%ecx");
+
+ /* enqcmd */
+
+ asm volatile("enqcmd (%rax),%rbx");
+ asm volatile("enqcmd 0x12345678(%rax),%rcx");
+ asm volatile("enqcmd (%eax),%ebx");
+ asm volatile("enqcmd 0x12345678(%eax),%ecx");
+
+ /* enqcmds */
+
+ asm volatile("enqcmds (%rax),%rbx");
+ asm volatile("enqcmds 0x12345678(%rax),%rcx");
+ asm volatile("enqcmds (%eax),%ebx");
+ asm volatile("enqcmds 0x12345678(%eax),%ecx");
+
#else /* #ifdef __x86_64__ */
/* bound r32, mem (same op code as EVEX prefix) */
@@ -2656,6 +2706,12 @@ int main(void)
asm volatile("xsaveopt (%eax)");
asm volatile("mfence");
+ /* cldemote m8 */
+
+ asm volatile("cldemote (%eax)");
+ asm volatile("cldemote (0x12345678)");
+ asm volatile("cldemote 0x12345678(%eax,%ecx,8)");
+
/* xsavec mem */
asm volatile("xsavec (%eax)");
@@ -2684,8 +2740,61 @@ int main(void)
asm volatile("ptwritel (0x12345678)");
asm volatile("ptwritel 0x12345678(%eax,%ecx,8)");
+ /* tpause */
+
+ asm volatile("tpause %ebx");
+
+ /* umonitor */
+
+ asm volatile("umonitor %ax");
+ asm volatile("umonitor %eax");
+
+ /* umwait */
+
+ asm volatile("umwait %eax");
+
+ /* movdiri */
+
+ asm volatile("movdiri %eax,(%ebx)");
+ asm volatile("movdiri %ecx,0x12345678(%eax)");
+
+ /* movdir64b */
+
+ asm volatile("movdir64b (%eax),%ebx");
+ asm volatile("movdir64b 0x12345678(%eax),%ecx");
+ asm volatile("movdir64b (%si),%bx");
+ asm volatile("movdir64b 0x1234(%si),%cx");
+
+ /* enqcmd */
+
+ asm volatile("enqcmd (%eax),%ebx");
+ asm volatile("enqcmd 0x12345678(%eax),%ecx");
+ asm volatile("enqcmd (%si),%bx");
+ asm volatile("enqcmd 0x1234(%si),%cx");
+
+ /* enqcmds */
+
+ asm volatile("enqcmds (%eax),%ebx");
+ asm volatile("enqcmds 0x12345678(%eax),%ecx");
+ asm volatile("enqcmds (%si),%bx");
+ asm volatile("enqcmds 0x1234(%si),%cx");
+
#endif /* #ifndef __x86_64__ */
+ /* SGX */
+
+ asm volatile("encls");
+ asm volatile("enclu");
+ asm volatile("enclv");
+
+ /* pconfig */
+
+ asm volatile("pconfig");
+
+ /* wbnoinvd */
+
+ asm volatile("wbnoinvd");
+
/* Following line is a marker for the awk script - do not change */
asm volatile("rdtsc"); /* Stop here */
^ permalink raw reply related [flat|nested] 7+ messages in thread
end of thread, other threads:[~2019-11-19 16:57 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-15 13:54 [PATCH 0/2] x86/insn: Add some Intel instructions to the opcode map Adrian Hunter
2019-11-15 13:54 ` [PATCH 1/2] x86/insn: perf tools: Add some instructions to the new instructions test Adrian Hunter
2019-11-19 16:56 ` [tip: perf/core] " tip-bot2 for Adrian Hunter
2019-11-15 13:54 ` [PATCH 2/2] x86/insn: Add some Intel instructions to the opcode map Adrian Hunter
2019-11-18 11:40 ` Masami Hiramatsu
2019-11-18 21:55 ` Arnaldo Carvalho de Melo
2019-11-19 16:56 ` [tip: perf/core] " tip-bot2 for Adrian Hunter
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.