* [U-Boot] [PATCH 0/2] Add SP805 driver for iproc platforms (DM) @ 2019-11-22 23:23 Vladimir Olovyannikov 2019-11-22 23:23 ` [U-Boot] [PATCH 1/2] dt-bindings: documentation on sp805(DM) iproc driver Vladimir Olovyannikov 2019-11-22 23:23 ` [U-Boot] [PATCH 2/2] drivers: watchdog: Add brcm iproc sp805 watchdog driver Vladimir Olovyannikov 0 siblings, 2 replies; 5+ messages in thread From: Vladimir Olovyannikov @ 2019-11-22 23:23 UTC (permalink / raw) To: u-boot This patchset adds driver-model based SP805 watchdog driver for Broadcom iProc platforms Pramod Kumar (2): dt-bindings: documentation on sp805(DM) iproc driver drivers: watchdog: Add brcm iproc sp805 watchdog driver .../bindings/watchdog/sp805-wdt_dm.txt | 15 ++ drivers/watchdog/Kconfig | 10 + drivers/watchdog/Makefile | 1 + drivers/watchdog/sp805_wdt_dm.c | 181 ++++++++++++++++++ 4 files changed, 207 insertions(+) create mode 100644 Documentation/devicetree/bindings/watchdog/sp805-wdt_dm.txt create mode 100644 drivers/watchdog/sp805_wdt_dm.c -- 2.17.1 ^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH 1/2] dt-bindings: documentation on sp805(DM) iproc driver 2019-11-22 23:23 [U-Boot] [PATCH 0/2] Add SP805 driver for iproc platforms (DM) Vladimir Olovyannikov @ 2019-11-22 23:23 ` Vladimir Olovyannikov 2019-11-22 23:23 ` [U-Boot] [PATCH 2/2] drivers: watchdog: Add brcm iproc sp805 watchdog driver Vladimir Olovyannikov 1 sibling, 0 replies; 5+ messages in thread From: Vladimir Olovyannikov @ 2019-11-22 23:23 UTC (permalink / raw) To: u-boot From: Pramod Kumar <pramod.kumar@broadcom.com> DT documentation for sp805 DM wdt Broadcom iproc driver used by iproc-based socs. Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com> Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com> --- .../devicetree/bindings/watchdog/sp805-wdt_dm.txt | 15 +++++++++++++++ 1 file changed, 15 insertions(+) create mode 100644 Documentation/devicetree/bindings/watchdog/sp805-wdt_dm.txt diff --git a/Documentation/devicetree/bindings/watchdog/sp805-wdt_dm.txt b/Documentation/devicetree/bindings/watchdog/sp805-wdt_dm.txt new file mode 100644 index 0000000000..34b677fd64 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/sp805-wdt_dm.txt @@ -0,0 +1,15 @@ +sp805 is an ARM Watchdog Timer (WDT) Controller (DM) + +Required properties: +-compatible : Should be arm,sp805-wdt +-reg : Base address and size of the watchdog timer registers. +-clk-mhz : Watchdog clock in mhz +timeout-msec : Watchdog timer expire value in msec + +Example: + wdt0: watchdog at c0000 { + compatible = "arm,sp805-wdt"; + reg = <0x000c0000 0x1000>; + clk-mhz = <12500000>; + timeout-msec = <60000>; + }; -- 2.17.1 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH 2/2] drivers: watchdog: Add brcm iproc sp805 watchdog driver 2019-11-22 23:23 [U-Boot] [PATCH 0/2] Add SP805 driver for iproc platforms (DM) Vladimir Olovyannikov 2019-11-22 23:23 ` [U-Boot] [PATCH 1/2] dt-bindings: documentation on sp805(DM) iproc driver Vladimir Olovyannikov @ 2019-11-22 23:23 ` Vladimir Olovyannikov 2019-11-23 13:52 ` Stefan Roese 1 sibling, 1 reply; 5+ messages in thread From: Vladimir Olovyannikov @ 2019-11-22 23:23 UTC (permalink / raw) To: u-boot From: Pramod Kumar <pramod.kumar@broadcom.com> Add sp805 watchdog driver for Broadcom iproc socs (DM). Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com> Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com> --- drivers/watchdog/Kconfig | 10 ++ drivers/watchdog/Makefile | 1 + drivers/watchdog/sp805_wdt_dm.c | 181 ++++++++++++++++++++++++++++++++ 3 files changed, 192 insertions(+) create mode 100644 drivers/watchdog/sp805_wdt_dm.c diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 8c16d69d33..74a5319467 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -40,6 +40,16 @@ config OMAP_WATCHDOG help Say Y here to enable the OMAP3+ watchdog driver. +config SP805_WATCHDOG + bool "Enable ARM SP805 watchdog driver (DM)" + depends on WDT + imply WATCHDOG + help + Say Y here to enable the sp805 watchdog (DM) + + This provides basic infrastructure to support sp805 watchdog + hardware; driver model. + config ULP_WATCHDOG bool "i.MX7ULP watchdog" help diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 955caef815..aacabf1f2e 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_S5P) += s5p_wdt.o obj-$(CONFIG_XILINX_TB_WATCHDOG) += xilinx_tb_wdt.o obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o obj-$(CONFIG_DESIGNWARE_WATCHDOG) += designware_wdt.o +obj-$(CONFIG_SP805_WATCHDOG) += sp805_iproc_dm.o obj-$(CONFIG_ULP_WATCHDOG) += ulp_wdog.o obj-$(CONFIG_$(SPL_TPL_)WDT) += wdt-uclass.o obj-$(CONFIG_WDT_SANDBOX) += sandbox_wdt.o diff --git a/drivers/watchdog/sp805_wdt_dm.c b/drivers/watchdog/sp805_wdt_dm.c new file mode 100644 index 0000000000..56d0e77080 --- /dev/null +++ b/drivers/watchdog/sp805_wdt_dm.c @@ -0,0 +1,181 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (c) 2018 Broadcom. + */ + +#include <common.h> +#include <command.h> +#include <dm/device.h> +#include <dm/read.h> +#include <log.h> +#include <wdt.h> +#include <asm/io.h> +#include <linux/bitops.h> + +/* SP805 register offset */ +#define SP805_WDOG_LOAD_OFF 0x000 +#define SP805_WDOG_CTR_OFF 0x008 +#define SP805_WDOG_CLR_OFF 0x00c +#define SP805_WDOG_LOCK_OFF 0xc00 + +/* Magic word to unlock the wd registers */ +#define WDOG_UNLOCK_KEY 0x1ACCE551 + +/* Register field definitions */ +#define SP805_CTR_RESEN BIT(1) +#define SP805_CTR_INTEN BIT(0) + +struct sp805_wdt_platdata { + void __iomem *regs; + u32 timeout_msec; + u32 clk_mhz; +}; + +/* Inline register access functions */ + +static inline void sp805_write_wdog_load(void __iomem *base, u32 value) +{ + writel(value, base + SP805_WDOG_LOAD_OFF); +} + +static inline void sp805_write_wdog_ctrl(void __iomem *base, u32 value) +{ + writel(value, base + SP805_WDOG_CTR_OFF); +} + +static inline void sp805_write_wdog_lock(void __iomem *base, u32 value) +{ + writel(value, base + SP805_WDOG_LOCK_OFF); +} + +static inline void sp805_write_wdog_kick(void __iomem *base, u32 value) +{ + writel(value, base + SP805_WDOG_CLR_OFF); +} + +static u32 msec_to_ticks(struct udevice *dev) +{ + u32 timeout_msec; + u32 msec; + struct sp805_wdt_platdata *pd = dev_get_platdata(dev); + + timeout_msec = env_get_ulong("wdt_timeout_msec", 16, 0); + if (timeout_msec) { + dev_dbg(dev, "Overriding timeout :%u\n", timeout_msec); + msec = timeout_msec; + } else { + msec = pd->timeout_msec; + } + + timeout_msec = (msec / 2) * (pd->clk_mhz / 1000); + + dev_dbg(dev, "ticks :%u\n", timeout_msec); + + return timeout_msec; +} + +static int sp805_wdt_expire_now(struct udevice *dev, ulong flags) +{ + struct sp805_wdt_platdata *pd = dev_get_platdata(dev); + + sp805_write_wdog_lock(pd->regs, WDOG_UNLOCK_KEY); + sp805_write_wdog_load(pd->regs, 0); + sp805_write_wdog_lock(pd->regs, 0); + + return 0; +} + +static int sp805_wdt_reset(struct udevice *dev) +{ + struct sp805_wdt_platdata *pd = dev_get_platdata(dev); + u32 ticks; + + ticks = msec_to_ticks(dev); + + sp805_write_wdog_lock(pd->regs, WDOG_UNLOCK_KEY); + sp805_write_wdog_load(pd->regs, ticks); + sp805_write_wdog_lock(pd->regs, 0); + + dev_dbg(dev, "%s ", __func__); + + return 0; +} + +static int sp805_wdt_stop(struct udevice *dev) +{ + struct sp805_wdt_platdata *pd = dev_get_platdata(dev); + + sp805_write_wdog_lock(pd->regs, WDOG_UNLOCK_KEY); + sp805_write_wdog_ctrl(pd->regs, 0); + + dev_dbg(dev, "Watchdog disabled!\n"); + + return 0; +} + +static int sp805_wdt_start(struct udevice *dev, u64 timeout, ulong flags) +{ + struct sp805_wdt_platdata *pd = dev_get_platdata(dev); + u32 ticks; + + ticks = msec_to_ticks(dev); + + dev_dbg(dev, "%s:\n", __func__); + + sp805_write_wdog_load(pd->regs, ticks); + sp805_write_wdog_ctrl(pd->regs, SP805_CTR_RESEN | SP805_CTR_INTEN); + /* Lock registers access */ + sp805_write_wdog_lock(pd->regs, 0); + + return 0; +} + +static int sp805_wdt_probe(struct udevice *dev) +{ + dev_dbg(dev, "%s: Probing wdt%u\n", __func__, dev->seq); + + return 0; +} + +static int sp805_wdt_ofdata_to_platdata(struct udevice *dev) +{ + struct sp805_wdt_platdata *pd = dev_get_platdata(dev); + + dev_dbg(dev, "%s->\n", __func__); + pd->regs = dev_read_addr_ptr(dev); + if (!pd->regs) + return -ENODEV; + + if (dev_read_u32(dev, "timeout-msec", &pd->timeout_msec)) + return -ENODATA; + + if (dev_read_u32(dev, "clk-mhz", &pd->clk_mhz)) + return -ENODATA; + + dev_dbg(dev, "%s: regs:%p, msec :%u, clk %u\n", __func__, + pd->regs, pd->timeout_msec, pd->clk_mhz); + + return 0; +} + +static const struct wdt_ops sp805_wdt_ops = { + .start = sp805_wdt_start, + .reset = sp805_wdt_reset, + .stop = sp805_wdt_stop, + .expire_now = sp805_wdt_expire_now, +}; + +static const struct udevice_id sp805_wdt_ids[] = { + { .compatible = "arm,sp805-wdt" }, + {} +}; + +U_BOOT_DRIVER(sp805_wdt) = { + .name = "sp805_wdt", + .id = UCLASS_WDT, + .of_match = sp805_wdt_ids, + .probe = sp805_wdt_probe, + .platdata_auto_alloc_size = sizeof(struct sp805_wdt_platdata), + .ofdata_to_platdata = sp805_wdt_ofdata_to_platdata, + .ops = &sp805_wdt_ops, +}; -- 2.17.1 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH 2/2] drivers: watchdog: Add brcm iproc sp805 watchdog driver 2019-11-22 23:23 ` [U-Boot] [PATCH 2/2] drivers: watchdog: Add brcm iproc sp805 watchdog driver Vladimir Olovyannikov @ 2019-11-23 13:52 ` Stefan Roese 2020-01-16 10:02 ` Stefan Roese 0 siblings, 1 reply; 5+ messages in thread From: Stefan Roese @ 2019-11-23 13:52 UTC (permalink / raw) To: u-boot On 23.11.19 00:23, Vladimir Olovyannikov wrote: > From: Pramod Kumar <pramod.kumar@broadcom.com> > > Add sp805 watchdog driver for Broadcom iproc socs (DM). > > Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com> > Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com> > --- > drivers/watchdog/Kconfig | 10 ++ > drivers/watchdog/Makefile | 1 + > drivers/watchdog/sp805_wdt_dm.c | 181 ++++++++++++++++++++++++++++++++ > 3 files changed, 192 insertions(+) > create mode 100644 drivers/watchdog/sp805_wdt_dm.c > > diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig > index 8c16d69d33..74a5319467 100644 > --- a/drivers/watchdog/Kconfig > +++ b/drivers/watchdog/Kconfig > @@ -40,6 +40,16 @@ config OMAP_WATCHDOG > help > Say Y here to enable the OMAP3+ watchdog driver. > > +config SP805_WATCHDOG > + bool "Enable ARM SP805 watchdog driver (DM)" > + depends on WDT > + imply WATCHDOG > + help > + Say Y here to enable the sp805 watchdog (DM) > + > + This provides basic infrastructure to support sp805 watchdog > + hardware; driver model. > + > config ULP_WATCHDOG > bool "i.MX7ULP watchdog" > help > diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile > index 955caef815..aacabf1f2e 100644 > --- a/drivers/watchdog/Makefile > +++ b/drivers/watchdog/Makefile > @@ -14,6 +14,7 @@ obj-$(CONFIG_S5P) += s5p_wdt.o > obj-$(CONFIG_XILINX_TB_WATCHDOG) += xilinx_tb_wdt.o > obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o > obj-$(CONFIG_DESIGNWARE_WATCHDOG) += designware_wdt.o > +obj-$(CONFIG_SP805_WATCHDOG) += sp805_iproc_dm.o > obj-$(CONFIG_ULP_WATCHDOG) += ulp_wdog.o > obj-$(CONFIG_$(SPL_TPL_)WDT) += wdt-uclass.o > obj-$(CONFIG_WDT_SANDBOX) += sandbox_wdt.o > diff --git a/drivers/watchdog/sp805_wdt_dm.c b/drivers/watchdog/sp805_wdt_dm.c > new file mode 100644 > index 0000000000..56d0e77080 > --- /dev/null > +++ b/drivers/watchdog/sp805_wdt_dm.c > @@ -0,0 +1,181 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * Copyright (c) 2018 Broadcom. > + */ > + > +#include <common.h> > +#include <command.h> > +#include <dm/device.h> > +#include <dm/read.h> > +#include <log.h> > +#include <wdt.h> > +#include <asm/io.h> > +#include <linux/bitops.h> > + > +/* SP805 register offset */ > +#define SP805_WDOG_LOAD_OFF 0x000 > +#define SP805_WDOG_CTR_OFF 0x008 > +#define SP805_WDOG_CLR_OFF 0x00c > +#define SP805_WDOG_LOCK_OFF 0xc00 > + > +/* Magic word to unlock the wd registers */ > +#define WDOG_UNLOCK_KEY 0x1ACCE551 > + > +/* Register field definitions */ > +#define SP805_CTR_RESEN BIT(1) > +#define SP805_CTR_INTEN BIT(0) > + > +struct sp805_wdt_platdata { > + void __iomem *regs; > + u32 timeout_msec; > + u32 clk_mhz; > +}; > + > +/* Inline register access functions */ > + > +static inline void sp805_write_wdog_load(void __iomem *base, u32 value) > +{ > + writel(value, base + SP805_WDOG_LOAD_OFF); > +} > + > +static inline void sp805_write_wdog_ctrl(void __iomem *base, u32 value) > +{ > + writel(value, base + SP805_WDOG_CTR_OFF); > +} > + > +static inline void sp805_write_wdog_lock(void __iomem *base, u32 value) > +{ > + writel(value, base + SP805_WDOG_LOCK_OFF); > +} > + > +static inline void sp805_write_wdog_kick(void __iomem *base, u32 value) > +{ > + writel(value, base + SP805_WDOG_CLR_OFF); > +} > + > +static u32 msec_to_ticks(struct udevice *dev) > +{ > + u32 timeout_msec; > + u32 msec; > + struct sp805_wdt_platdata *pd = dev_get_platdata(dev); > + > + timeout_msec = env_get_ulong("wdt_timeout_msec", 16, 0); > + if (timeout_msec) { > + dev_dbg(dev, "Overriding timeout :%u\n", timeout_msec); > + msec = timeout_msec; > + } else { > + msec = pd->timeout_msec; > + } > + > + timeout_msec = (msec / 2) * (pd->clk_mhz / 1000); > + > + dev_dbg(dev, "ticks :%u\n", timeout_msec); > + > + return timeout_msec; > +} > + > +static int sp805_wdt_expire_now(struct udevice *dev, ulong flags) > +{ > + struct sp805_wdt_platdata *pd = dev_get_platdata(dev); > + > + sp805_write_wdog_lock(pd->regs, WDOG_UNLOCK_KEY); > + sp805_write_wdog_load(pd->regs, 0); > + sp805_write_wdog_lock(pd->regs, 0); > + > + return 0; > +} > + > +static int sp805_wdt_reset(struct udevice *dev) > +{ > + struct sp805_wdt_platdata *pd = dev_get_platdata(dev); > + u32 ticks; > + > + ticks = msec_to_ticks(dev); > + > + sp805_write_wdog_lock(pd->regs, WDOG_UNLOCK_KEY); > + sp805_write_wdog_load(pd->regs, ticks); > + sp805_write_wdog_lock(pd->regs, 0); > + > + dev_dbg(dev, "%s ", __func__); > + > + return 0; > +} > + > +static int sp805_wdt_stop(struct udevice *dev) > +{ > + struct sp805_wdt_platdata *pd = dev_get_platdata(dev); > + > + sp805_write_wdog_lock(pd->regs, WDOG_UNLOCK_KEY); > + sp805_write_wdog_ctrl(pd->regs, 0); > + > + dev_dbg(dev, "Watchdog disabled!\n"); > + > + return 0; > +} > + > +static int sp805_wdt_start(struct udevice *dev, u64 timeout, ulong flags) > +{ > + struct sp805_wdt_platdata *pd = dev_get_platdata(dev); > + u32 ticks; > + > + ticks = msec_to_ticks(dev); > + > + dev_dbg(dev, "%s:\n", __func__); > + > + sp805_write_wdog_load(pd->regs, ticks); > + sp805_write_wdog_ctrl(pd->regs, SP805_CTR_RESEN | SP805_CTR_INTEN); > + /* Lock registers access */ > + sp805_write_wdog_lock(pd->regs, 0); > + > + return 0; > +} > + > +static int sp805_wdt_probe(struct udevice *dev) > +{ > + dev_dbg(dev, "%s: Probing wdt%u\n", __func__, dev->seq); > + > + return 0; > +} > + > +static int sp805_wdt_ofdata_to_platdata(struct udevice *dev) > +{ > + struct sp805_wdt_platdata *pd = dev_get_platdata(dev); > + > + dev_dbg(dev, "%s->\n", __func__); > + pd->regs = dev_read_addr_ptr(dev); > + if (!pd->regs) > + return -ENODEV; > + > + if (dev_read_u32(dev, "timeout-msec", &pd->timeout_msec)) > + return -ENODATA; Why are you not using the already supported "timeout-sec" DT property instead? This one is also supported in Linux, so please move to this one. This DT values is already read in initr_watchdog() and provided to your DM enabled driver. Thanks, Stefan ^ permalink raw reply [flat|nested] 5+ messages in thread
* [U-Boot] [PATCH 2/2] drivers: watchdog: Add brcm iproc sp805 watchdog driver 2019-11-23 13:52 ` Stefan Roese @ 2020-01-16 10:02 ` Stefan Roese 0 siblings, 0 replies; 5+ messages in thread From: Stefan Roese @ 2020-01-16 10:02 UTC (permalink / raw) To: u-boot Hi Vladimir, Hi Pramod, On 23.11.19 14:52, Stefan Roese wrote: > On 23.11.19 00:23, Vladimir Olovyannikov wrote: >> From: Pramod Kumar <pramod.kumar@broadcom.com> >> >> Add sp805 watchdog driver for Broadcom iproc socs (DM). >> >> Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com> >> Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com> >> --- >> drivers/watchdog/Kconfig | 10 ++ >> drivers/watchdog/Makefile | 1 + >> drivers/watchdog/sp805_wdt_dm.c | 181 ++++++++++++++++++++++++++++++++ >> 3 files changed, 192 insertions(+) >> create mode 100644 drivers/watchdog/sp805_wdt_dm.c >> >> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig >> index 8c16d69d33..74a5319467 100644 >> --- a/drivers/watchdog/Kconfig >> +++ b/drivers/watchdog/Kconfig >> @@ -40,6 +40,16 @@ config OMAP_WATCHDOG >> help >> Say Y here to enable the OMAP3+ watchdog driver. >> >> +config SP805_WATCHDOG >> + bool "Enable ARM SP805 watchdog driver (DM)" >> + depends on WDT >> + imply WATCHDOG >> + help >> + Say Y here to enable the sp805 watchdog (DM) >> + >> + This provides basic infrastructure to support sp805 watchdog >> + hardware; driver model. >> + >> config ULP_WATCHDOG >> bool "i.MX7ULP watchdog" >> help >> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile >> index 955caef815..aacabf1f2e 100644 >> --- a/drivers/watchdog/Makefile >> +++ b/drivers/watchdog/Makefile >> @@ -14,6 +14,7 @@ obj-$(CONFIG_S5P) += s5p_wdt.o >> obj-$(CONFIG_XILINX_TB_WATCHDOG) += xilinx_tb_wdt.o >> obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o >> obj-$(CONFIG_DESIGNWARE_WATCHDOG) += designware_wdt.o >> +obj-$(CONFIG_SP805_WATCHDOG) += sp805_iproc_dm.o >> obj-$(CONFIG_ULP_WATCHDOG) += ulp_wdog.o >> obj-$(CONFIG_$(SPL_TPL_)WDT) += wdt-uclass.o >> obj-$(CONFIG_WDT_SANDBOX) += sandbox_wdt.o >> diff --git a/drivers/watchdog/sp805_wdt_dm.c b/drivers/watchdog/sp805_wdt_dm.c >> new file mode 100644 >> index 0000000000..56d0e77080 >> --- /dev/null >> +++ b/drivers/watchdog/sp805_wdt_dm.c >> @@ -0,0 +1,181 @@ >> +// SPDX-License-Identifier: GPL-2.0+ >> +/* >> + * Copyright (c) 2018 Broadcom. >> + */ >> + >> +#include <common.h> >> +#include <command.h> >> +#include <dm/device.h> >> +#include <dm/read.h> >> +#include <log.h> >> +#include <wdt.h> >> +#include <asm/io.h> >> +#include <linux/bitops.h> >> + >> +/* SP805 register offset */ >> +#define SP805_WDOG_LOAD_OFF 0x000 >> +#define SP805_WDOG_CTR_OFF 0x008 >> +#define SP805_WDOG_CLR_OFF 0x00c >> +#define SP805_WDOG_LOCK_OFF 0xc00 >> + >> +/* Magic word to unlock the wd registers */ >> +#define WDOG_UNLOCK_KEY 0x1ACCE551 >> + >> +/* Register field definitions */ >> +#define SP805_CTR_RESEN BIT(1) >> +#define SP805_CTR_INTEN BIT(0) >> + >> +struct sp805_wdt_platdata { >> + void __iomem *regs; >> + u32 timeout_msec; >> + u32 clk_mhz; >> +}; >> + >> +/* Inline register access functions */ >> + >> +static inline void sp805_write_wdog_load(void __iomem *base, u32 value) >> +{ >> + writel(value, base + SP805_WDOG_LOAD_OFF); >> +} >> + >> +static inline void sp805_write_wdog_ctrl(void __iomem *base, u32 value) >> +{ >> + writel(value, base + SP805_WDOG_CTR_OFF); >> +} >> + >> +static inline void sp805_write_wdog_lock(void __iomem *base, u32 value) >> +{ >> + writel(value, base + SP805_WDOG_LOCK_OFF); >> +} >> + >> +static inline void sp805_write_wdog_kick(void __iomem *base, u32 value) >> +{ >> + writel(value, base + SP805_WDOG_CLR_OFF); >> +} >> + >> +static u32 msec_to_ticks(struct udevice *dev) >> +{ >> + u32 timeout_msec; >> + u32 msec; >> + struct sp805_wdt_platdata *pd = dev_get_platdata(dev); >> + >> + timeout_msec = env_get_ulong("wdt_timeout_msec", 16, 0); >> + if (timeout_msec) { >> + dev_dbg(dev, "Overriding timeout :%u\n", timeout_msec); >> + msec = timeout_msec; >> + } else { >> + msec = pd->timeout_msec; >> + } >> + >> + timeout_msec = (msec / 2) * (pd->clk_mhz / 1000); >> + >> + dev_dbg(dev, "ticks :%u\n", timeout_msec); >> + >> + return timeout_msec; >> +} >> + >> +static int sp805_wdt_expire_now(struct udevice *dev, ulong flags) >> +{ >> + struct sp805_wdt_platdata *pd = dev_get_platdata(dev); >> + >> + sp805_write_wdog_lock(pd->regs, WDOG_UNLOCK_KEY); >> + sp805_write_wdog_load(pd->regs, 0); >> + sp805_write_wdog_lock(pd->regs, 0); >> + >> + return 0; >> +} >> + >> +static int sp805_wdt_reset(struct udevice *dev) >> +{ >> + struct sp805_wdt_platdata *pd = dev_get_platdata(dev); >> + u32 ticks; >> + >> + ticks = msec_to_ticks(dev); >> + >> + sp805_write_wdog_lock(pd->regs, WDOG_UNLOCK_KEY); >> + sp805_write_wdog_load(pd->regs, ticks); >> + sp805_write_wdog_lock(pd->regs, 0); >> + >> + dev_dbg(dev, "%s ", __func__); >> + >> + return 0; >> +} >> + >> +static int sp805_wdt_stop(struct udevice *dev) >> +{ >> + struct sp805_wdt_platdata *pd = dev_get_platdata(dev); >> + >> + sp805_write_wdog_lock(pd->regs, WDOG_UNLOCK_KEY); >> + sp805_write_wdog_ctrl(pd->regs, 0); >> + >> + dev_dbg(dev, "Watchdog disabled!\n"); >> + >> + return 0; >> +} >> + >> +static int sp805_wdt_start(struct udevice *dev, u64 timeout, ulong flags) >> +{ >> + struct sp805_wdt_platdata *pd = dev_get_platdata(dev); >> + u32 ticks; >> + >> + ticks = msec_to_ticks(dev); >> + >> + dev_dbg(dev, "%s:\n", __func__); >> + >> + sp805_write_wdog_load(pd->regs, ticks); >> + sp805_write_wdog_ctrl(pd->regs, SP805_CTR_RESEN | SP805_CTR_INTEN); >> + /* Lock registers access */ >> + sp805_write_wdog_lock(pd->regs, 0); >> + >> + return 0; >> +} >> + >> +static int sp805_wdt_probe(struct udevice *dev) >> +{ >> + dev_dbg(dev, "%s: Probing wdt%u\n", __func__, dev->seq); >> + >> + return 0; >> +} >> + >> +static int sp805_wdt_ofdata_to_platdata(struct udevice *dev) >> +{ >> + struct sp805_wdt_platdata *pd = dev_get_platdata(dev); >> + >> + dev_dbg(dev, "%s->\n", __func__); >> + pd->regs = dev_read_addr_ptr(dev); >> + if (!pd->regs) >> + return -ENODEV; >> + >> + if (dev_read_u32(dev, "timeout-msec", &pd->timeout_msec)) >> + return -ENODATA; > > Why are you not using the already supported "timeout-sec" DT property > instead? This one is also supported in Linux, so please move to this > one. This DT values is already read in initr_watchdog() and provided to > your DM enabled driver. Could you please comment on this? Thanks, Stefan ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2020-01-16 10:02 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2019-11-22 23:23 [U-Boot] [PATCH 0/2] Add SP805 driver for iproc platforms (DM) Vladimir Olovyannikov 2019-11-22 23:23 ` [U-Boot] [PATCH 1/2] dt-bindings: documentation on sp805(DM) iproc driver Vladimir Olovyannikov 2019-11-22 23:23 ` [U-Boot] [PATCH 2/2] drivers: watchdog: Add brcm iproc sp805 watchdog driver Vladimir Olovyannikov 2019-11-23 13:52 ` Stefan Roese 2020-01-16 10:02 ` Stefan Roese
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.