[PATCH 4.9 1/6] ARM: 8904/1: skip nomap memblocks while finding the lowmem/highmem boundary

[PATCH 4.9 1/6] ARM: 8904/1: skip nomap memblocks while finding the lowmem/highmem boundary

[Lee Jones]

From: Chester Lin <clin@suse.com>

[ Upstream commit 1d31999cf04c21709f72ceb17e65b54a401330da ]

adjust_lowmem_bounds() checks every memblocks in order to find the boundary
between lowmem and highmem. However some memblocks could be marked as NOMAP
so they are not used by kernel, which should be skipped while calculating
the boundary.

Signed-off-by: Chester Lin <clin@suse.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/mm/mmu.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 241bf898adf5..7edc6c3f4bd9 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -1188,6 +1188,9 @@ void __init adjust_lowmem_bounds(void)
 		phys_addr_t block_start = reg->base;
 		phys_addr_t block_end = reg->base + reg->size;
 
+		if (memblock_is_nomap(reg))
+			continue;
+
 		if (reg->base < vmalloc_limit) {
 			if (block_end > lowmem_limit)
 				/*
-- 
2.24.0

[PATCH 4.9 2/6] can: dev: can_dellink(): remove return at end of void function

[Lee Jones]

From: Marc Kleine-Budde <mkl@pengutronix.de>

[ Upstream commit d36673f5918c8fd3533f7c0d4bac041baf39c7bb ]

This patch remove the return at the end of the void function
can_dellink().

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/net/can/dev.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index ffc5467a1ec2..1b3d7ec3462c 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -1071,7 +1071,6 @@ static int can_newlink(struct net *src_net, struct net_device *dev,
 
 static void can_dellink(struct net_device *dev, struct list_head *head)
 {
-	return;
 }
 
 static struct rtnl_link_ops can_link_ops __read_mostly = {
-- 
2.24.0

[PATCH 4.9 3/6] arm64: fix for bad_mode() handler to always result in panic

[Lee Jones]

From: Hari Vyas <hari.vyas@broadcom.com>

[ Upstream commit e4ba15debcfd27f60d43da940a58108783bff2a6 ]

The bad_mode() handler is called if we encounter an uunknown exception,
with the expectation that the subsequent call to panic() will halt the
system. Unfortunately, if the exception calling bad_mode() is taken from
EL0, then the call to die() can end up killing the current user task and
calling schedule() instead of falling through to panic().

Remove the die() call altogether, since we really want to bring down the
machine in this "impossible" case.

Signed-off-by: Hari Vyas <hari.vyas@broadcom.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm64/kernel/traps.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
index 28bef94cf792..5962badb3346 100644
--- a/arch/arm64/kernel/traps.c
+++ b/arch/arm64/kernel/traps.c
@@ -611,7 +611,6 @@ asmlinkage void bad_mode(struct pt_regs *regs, int reason, unsigned int esr)
 		handler[reason], smp_processor_id(), esr,
 		esr_get_class_string(esr));
 
-	die("Oops - bad mode", regs, 0);
 	local_irq_disable();
 	panic("bad mode");
 }
-- 
2.24.0

[PATCH 4.9 4/6] cpufreq: Skip cpufreq resume if it's not suspended

[Lee Jones]

From: Bo Yan <byan@nvidia.com>

[ Upstream commit 703cbaa601ff3fb554d1246c336ba727cc083ea0 ]

cpufreq_resume can be called even without preceding cpufreq_suspend.
This can happen in following scenario:

    suspend_devices_and_enter
       --> dpm_suspend_start
          --> dpm_prepare
              --> device_prepare : this function errors out
          --> dpm_suspend: this is skipped due to dpm_prepare failure
                           this means cpufreq_suspend is skipped over
       --> goto Recover_platform, due to previous error
       --> goto Resume_devices
       --> dpm_resume_end
           --> dpm_resume
               --> cpufreq_resume

In case schedutil is used as frequency governor, cpufreq_resume will
eventually call sugov_start, which does following:

    memset(sg_cpu, 0, sizeof(*sg_cpu));
    ....

This effectively erases function pointer for frequency update, causing
crash later on. The function pointer would have been set correctly if
subsequent cpufreq_add_update_util_hook runs successfully, but that
function returns earlier because cpufreq_suspend was not called:

    if (WARN_ON(per_cpu(cpufreq_update_util_data, cpu)))
		return;

The fix is to check cpufreq_suspended first, if it's false, that means
cpufreq_suspend was not called in the first place, so do not resume
cpufreq.

Signed-off-by: Bo Yan <byan@nvidia.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Dropped printing a message ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/cpufreq/cpufreq.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index d43cd983a7ec..04101a6dc7f5 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -1646,6 +1646,9 @@ void cpufreq_resume(void)
 	if (!cpufreq_driver)
 		return;
 
+	if (unlikely(!cpufreq_suspended))
+		return;
+
 	cpufreq_suspended = false;
 
 	if (!has_target() && !cpufreq_driver->resume)
-- 
2.24.0

[PATCH 4.9 5/6] dm: use blk_set_queue_dying() in __dm_destroy()

[Lee Jones]

From: Bart Van Assche <bart.vanassche@sandisk.com>

[ Upstream commit 2e91c3694181dc500faffec16c5aaa0ac5e15449 ]

After QUEUE_FLAG_DYING has been set any code that is waiting in
get_request() should be woken up.  But to get this behaviour
blk_set_queue_dying() must be used instead of only setting
QUEUE_FLAG_DYING.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/md/dm.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 2ffe7db75acb..36e6221fabab 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -1946,9 +1946,7 @@ static void __dm_destroy(struct mapped_device *md, bool wait)
 	set_bit(DMF_FREEING, &md->flags);
 	spin_unlock(&_minor_lock);
 
-	spin_lock_irq(q->queue_lock);
-	queue_flag_set(QUEUE_FLAG_DYING, q);
-	spin_unlock_irq(q->queue_lock);
+	blk_set_queue_dying(q);
 
 	if (dm_request_based(md) && md->kworker_task)
 		kthread_flush_worker(&md->kworker);
-- 
2.24.0

[PATCH 4.9 6/6] ocfs2: remove ocfs2_is_o2cb_active()

[Lee Jones]

From: Gang He <ghe@suse.com>

[ Upstream commit a634644751c46238df58bbfe992e30c1668388db ]

Remove ocfs2_is_o2cb_active().  We have similar functions to identify
which cluster stack is being used via osb->osb_cluster_stack.

Secondly, the current implementation of ocfs2_is_o2cb_active() is not
totally safe.  Based on the design of stackglue, we need to get
ocfs2_stack_lock before using ocfs2_stack related data structures, and
that active_stack pointer can be NULL in the case of mount failure.

Link: http://lkml.kernel.org/r/1495441079-11708-1-git-send-email-ghe@suse.com
Signed-off-by: Gang He <ghe@suse.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Reviewed-by: Eric Ren <zren@suse.com>
Acked-by: Changwei Ge <ge.changwei@h3c.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 fs/ocfs2/dlmglue.c   | 2 +-
 fs/ocfs2/stackglue.c | 6 ------
 fs/ocfs2/stackglue.h | 3 ---
 3 files changed, 1 insertion(+), 10 deletions(-)

diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c
index 5729d55da67d..2c3e975126b3 100644
--- a/fs/ocfs2/dlmglue.c
+++ b/fs/ocfs2/dlmglue.c
@@ -3421,7 +3421,7 @@ static int ocfs2_downconvert_lock(struct ocfs2_super *osb,
 	 * we can recover correctly from node failure. Otherwise, we may get
 	 * invalid LVB in LKB, but without DLM_SBF_VALNOTVALID being set.
 	 */
-	if (!ocfs2_is_o2cb_active() &&
+	if (ocfs2_userspace_stack(osb) &&
 	    lockres->l_ops->flags & LOCK_TYPE_USES_LVB)
 		lvb = 1;
 
diff --git a/fs/ocfs2/stackglue.c b/fs/ocfs2/stackglue.c
index 820359096c7a..52c07346bea3 100644
--- a/fs/ocfs2/stackglue.c
+++ b/fs/ocfs2/stackglue.c
@@ -48,12 +48,6 @@ static char ocfs2_hb_ctl_path[OCFS2_MAX_HB_CTL_PATH] = "/sbin/ocfs2_hb_ctl";
  */
 static struct ocfs2_stack_plugin *active_stack;
 
-inline int ocfs2_is_o2cb_active(void)
-{
-	return !strcmp(active_stack->sp_name, OCFS2_STACK_PLUGIN_O2CB);
-}
-EXPORT_SYMBOL_GPL(ocfs2_is_o2cb_active);
-
 static struct ocfs2_stack_plugin *ocfs2_stack_lookup(const char *name)
 {
 	struct ocfs2_stack_plugin *p;
diff --git a/fs/ocfs2/stackglue.h b/fs/ocfs2/stackglue.h
index e3036e1790e8..f2dce10fae54 100644
--- a/fs/ocfs2/stackglue.h
+++ b/fs/ocfs2/stackglue.h
@@ -298,9 +298,6 @@ void ocfs2_stack_glue_set_max_proto_version(struct ocfs2_protocol_version *max_p
 int ocfs2_stack_glue_register(struct ocfs2_stack_plugin *plugin);
 void ocfs2_stack_glue_unregister(struct ocfs2_stack_plugin *plugin);
 
-/* In ocfs2_downconvert_lock(), we need to know which stack we are using */
-int ocfs2_is_o2cb_active(void);
-
 extern struct kset *ocfs2_kset;
 
 #endif  /* STACKGLUE_H */
-- 
2.24.0