From: Olof Johansson <olof@lixom.net> To: Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com> Cc: alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org, Olof Johansson <olof@lixom.net> Subject: [PATCH] ALSA: echoaudio: simplify get_audio_levels Date: Sat, 7 Dec 2019 14:49:53 -0800 [thread overview] Message-ID: <20191207224953.25944-1-olof@lixom.net> (raw) The loop optimizer seems to go astray here, and produces some warnings that don't seem valid. Still, the code can be simplified -- just clear the whole array at the beginning, and fill in whatever values are valid on the platform. Warnings before this change (GCC 8.2.0 ARM allmodconfig): In file included from ../sound/pci/echoaudio/gina24.c:115: ../sound/pci/echoaudio/echoaudio.c: In function 'snd_echo_vumeters_get': ../sound/pci/echoaudio/echoaudio_dsp.c:647:9: warning: iteration 1073741824 invokes undefined behavior [-Waggressive-loop-optimizations] In file included from ../sound/pci/echoaudio/layla24.c:112: ../sound/pci/echoaudio/echoaudio.c: In function 'snd_echo_vumeters_get': ../sound/pci/echoaudio/echoaudio_dsp.c:658:9: warning: iteration 1073741824 invokes undefined behavior [-Waggressive-loop-optimizations] ../sound/pci/echoaudio/echoaudio_dsp.c:647:9: warning: iteration 1073741824 invokes undefined behavior [-Waggressive-loop-optimizations] Signed-off-by: Olof Johansson <olof@lixom.net> --- sound/pci/echoaudio/echoaudio_dsp.c | 20 +++++++------------- 1 file changed, 7 insertions(+), 13 deletions(-) diff --git a/sound/pci/echoaudio/echoaudio_dsp.c b/sound/pci/echoaudio/echoaudio_dsp.c index 50d4a87a6bb34..f02f5b1568dee 100644 --- a/sound/pci/echoaudio/echoaudio_dsp.c +++ b/sound/pci/echoaudio/echoaudio_dsp.c @@ -635,36 +635,30 @@ This function assumes there are no more than 16 in/out busses or pipes Meters is an array [3][16][2] of long. */ static void get_audio_meters(struct echoaudio *chip, long *meters) { - int i, m, n; + unsigned int i, m, n; - m = 0; - n = 0; - for (i = 0; i < num_busses_out(chip); i++, m++) { + for (i = 0 ; i < 96; i++) + meters[i] = 0; + + for (m = 0, n = 0, i = 0; i < num_busses_out(chip); i++, m++) { meters[n++] = chip->comm_page->vu_meter[m]; meters[n++] = chip->comm_page->peak_meter[m]; } - for (; n < 32; n++) - meters[n] = 0; #ifdef ECHOCARD_ECHO3G m = E3G_MAX_OUTPUTS; /* Skip unused meters */ #endif - for (i = 0; i < num_busses_in(chip); i++, m++) { + for (n = 32, i = 0; i < num_busses_in(chip); i++, m++) { meters[n++] = chip->comm_page->vu_meter[m]; meters[n++] = chip->comm_page->peak_meter[m]; } - for (; n < 64; n++) - meters[n] = 0; - #ifdef ECHOCARD_HAS_VMIXER - for (i = 0; i < num_pipes_out(chip); i++, m++) { + for (n = 64, i = 0; i < num_pipes_out(chip); i++, m++) { meters[n++] = chip->comm_page->vu_meter[m]; meters[n++] = chip->comm_page->peak_meter[m]; } #endif - for (; n < 96; n++) - meters[n] = 0; } -- 2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: Olof Johansson <olof@lixom.net> To: Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com> Cc: Olof Johansson <olof@lixom.net>, alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org Subject: [alsa-devel] [PATCH] ALSA: echoaudio: simplify get_audio_levels Date: Sat, 7 Dec 2019 14:49:53 -0800 [thread overview] Message-ID: <20191207224953.25944-1-olof@lixom.net> (raw) The loop optimizer seems to go astray here, and produces some warnings that don't seem valid. Still, the code can be simplified -- just clear the whole array at the beginning, and fill in whatever values are valid on the platform. Warnings before this change (GCC 8.2.0 ARM allmodconfig): In file included from ../sound/pci/echoaudio/gina24.c:115: ../sound/pci/echoaudio/echoaudio.c: In function 'snd_echo_vumeters_get': ../sound/pci/echoaudio/echoaudio_dsp.c:647:9: warning: iteration 1073741824 invokes undefined behavior [-Waggressive-loop-optimizations] In file included from ../sound/pci/echoaudio/layla24.c:112: ../sound/pci/echoaudio/echoaudio.c: In function 'snd_echo_vumeters_get': ../sound/pci/echoaudio/echoaudio_dsp.c:658:9: warning: iteration 1073741824 invokes undefined behavior [-Waggressive-loop-optimizations] ../sound/pci/echoaudio/echoaudio_dsp.c:647:9: warning: iteration 1073741824 invokes undefined behavior [-Waggressive-loop-optimizations] Signed-off-by: Olof Johansson <olof@lixom.net> --- sound/pci/echoaudio/echoaudio_dsp.c | 20 +++++++------------- 1 file changed, 7 insertions(+), 13 deletions(-) diff --git a/sound/pci/echoaudio/echoaudio_dsp.c b/sound/pci/echoaudio/echoaudio_dsp.c index 50d4a87a6bb34..f02f5b1568dee 100644 --- a/sound/pci/echoaudio/echoaudio_dsp.c +++ b/sound/pci/echoaudio/echoaudio_dsp.c @@ -635,36 +635,30 @@ This function assumes there are no more than 16 in/out busses or pipes Meters is an array [3][16][2] of long. */ static void get_audio_meters(struct echoaudio *chip, long *meters) { - int i, m, n; + unsigned int i, m, n; - m = 0; - n = 0; - for (i = 0; i < num_busses_out(chip); i++, m++) { + for (i = 0 ; i < 96; i++) + meters[i] = 0; + + for (m = 0, n = 0, i = 0; i < num_busses_out(chip); i++, m++) { meters[n++] = chip->comm_page->vu_meter[m]; meters[n++] = chip->comm_page->peak_meter[m]; } - for (; n < 32; n++) - meters[n] = 0; #ifdef ECHOCARD_ECHO3G m = E3G_MAX_OUTPUTS; /* Skip unused meters */ #endif - for (i = 0; i < num_busses_in(chip); i++, m++) { + for (n = 32, i = 0; i < num_busses_in(chip); i++, m++) { meters[n++] = chip->comm_page->vu_meter[m]; meters[n++] = chip->comm_page->peak_meter[m]; } - for (; n < 64; n++) - meters[n] = 0; - #ifdef ECHOCARD_HAS_VMIXER - for (i = 0; i < num_pipes_out(chip); i++, m++) { + for (n = 64, i = 0; i < num_pipes_out(chip); i++, m++) { meters[n++] = chip->comm_page->vu_meter[m]; meters[n++] = chip->comm_page->peak_meter[m]; } #endif - for (; n < 96; n++) - meters[n] = 0; } -- 2.11.0 _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next reply other threads:[~2019-12-07 22:50 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-12-07 22:49 Olof Johansson [this message] 2019-12-07 22:49 ` [alsa-devel] [PATCH] ALSA: echoaudio: simplify get_audio_levels Olof Johansson 2019-12-08 8:48 ` Takashi Iwai 2019-12-08 8:48 ` [alsa-devel] " Takashi Iwai
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20191207224953.25944-1-olof@lixom.net \ --to=olof@lixom.net \ --cc=alsa-devel@alsa-project.org \ --cc=linux-kernel@vger.kernel.org \ --cc=perex@perex.cz \ --cc=tiwai@suse.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.