* [PATCH 1/3] sm750fb: Fix Avoid CamelCase
@ 2019-12-08 13:28 Sven Leykauf
2019-12-08 13:28 ` [PATCH 2/3] " Sven Leykauf
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Sven Leykauf @ 2019-12-08 13:28 UTC (permalink / raw)
To: devel; +Cc: Daniel Bauer, Sven Leykauf, linux-kernel
Change names of variables and functions into proper names,
according to coding style.
Patch upholds compileability by considering dependencies.
Co-developed-by: Daniel Bauer <daniel.j.bauer@fau.de>
Signed-off-by: Daniel Bauer <daniel.j.bauer@fau.de>
Signed-off-by: Sven Leykauf <sven_leykauf1@web.de>
---
drivers/staging/sm750fb/ddk750_dvi.c | 50 +++----
drivers/staging/sm750fb/ddk750_dvi.h | 64 ++++-----
drivers/staging/sm750fb/ddk750_sii164.c | 171 ++++++++++++------------
drivers/staging/sm750fb/ddk750_sii164.h | 40 +++---
4 files changed, 162 insertions(+), 163 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_dvi.c b/drivers/staging/sm750fb/ddk750_dvi.c
index cd564ea40779..930f56d91474 100644
--- a/drivers/staging/sm750fb/ddk750_dvi.c
+++ b/drivers/staging/sm750fb/ddk750_dvi.c
@@ -11,41 +11,41 @@
* function API. Please set the function pointer to NULL whenever the function
* is not supported.
*/
-static struct dvi_ctrl_device g_dcftSupportedDviController[] = {
+static struct dvi_ctrl_device g_dcft_supported_dvi_controller[] = {
#ifdef DVI_CTRL_SII164
{
- .pfnInit = sii164InitChip,
- .pfnGetVendorId = sii164GetVendorID,
- .pfnGetDeviceId = sii164GetDeviceID,
+ .pfn_init = sii164_init_chip,
+ .pfn_get_vendor_id = sii164_get_vendor_id,
+ .pfn_get_device_id = sii164_get_device_id,
#ifdef SII164_FULL_FUNCTIONS
- .pfnResetChip = sii164ResetChip,
- .pfnGetChipString = sii164GetChipString,
- .pfnSetPower = sii164SetPower,
- .pfnEnableHotPlugDetection = sii164EnableHotPlugDetection,
- .pfnIsConnected = sii164IsConnected,
- .pfnCheckInterrupt = sii164CheckInterrupt,
- .pfnClearInterrupt = sii164ClearInterrupt,
+ .pfn_reset_chip = sii164_reset_chip,
+ .pfn_get_chip_string = sii164_get_chip_string,
+ .pfn_set_power = sii164_set_power,
+ .pfn_enable_hot_plug_detection = sii164_enable_hot_plug_detection,
+ .pfn_is_connected = sii164_is_connected,
+ .pfn_check_interrupt = sii164_check_interrupt,
+ .pfn_clear_interrupt = sii164_clear_interrupt,
#endif
},
#endif
};
-int dviInit(unsigned char edge_select,
- unsigned char bus_select,
- unsigned char dual_edge_clk_select,
- unsigned char hsync_enable,
- unsigned char vsync_enable,
- unsigned char deskew_enable,
- unsigned char deskew_setting,
- unsigned char continuous_sync_enable,
- unsigned char pll_filter_enable,
- unsigned char pll_filter_value)
+int dvi_init(unsigned char edge_select,
+ unsigned char bus_select,
+ unsigned char dual_edge_clk_select,
+ unsigned char hsync_enable,
+ unsigned char vsync_enable,
+ unsigned char deskew_enable,
+ unsigned char deskew_setting,
+ unsigned char continuous_sync_enable,
+ unsigned char pll_filter_enable,
+ unsigned char pll_filter_value)
{
- struct dvi_ctrl_device *pCurrentDviCtrl;
+ struct dvi_ctrl_device *p_current_dvi_ctrl;
- pCurrentDviCtrl = g_dcftSupportedDviController;
- if (pCurrentDviCtrl->pfnInit) {
- return pCurrentDviCtrl->pfnInit(edge_select,
+ p_current_dvi_ctrl = g_dcft_supported_dvi_controller;
+ if (p_current_dvi_ctrl->pfn_init) {
+ return p_current_dvi_ctrl->pfn_init(edge_select,
bus_select,
dual_edge_clk_select,
hsync_enable,
diff --git a/drivers/staging/sm750fb/ddk750_dvi.h b/drivers/staging/sm750fb/ddk750_dvi.h
index 1c7a565b617a..d3ea365d1509 100644
--- a/drivers/staging/sm750fb/ddk750_dvi.h
+++ b/drivers/staging/sm750fb/ddk750_dvi.h
@@ -4,54 +4,54 @@
/* dvi chip stuffs structros */
-typedef long (*PFN_DVICTRL_INIT)(unsigned char edgeSelect,
- unsigned char busSelect,
- unsigned char dualEdgeClkSelect,
- unsigned char hsyncEnable,
- unsigned char vsyncEnable,
- unsigned char deskewEnable,
- unsigned char deskewSetting,
- unsigned char continuousSyncEnable,
- unsigned char pllFilterEnable,
- unsigned char pllFilterValue);
+typedef long (*PFN_DVICTRL_INIT)(unsigned char edge_select,
+ unsigned char bus_select,
+ unsigned char dual_edge_clk_select,
+ unsigned char hsync_enable,
+ unsigned char vsync_enable,
+ unsigned char deskew_enable,
+ unsigned char deskew_setting,
+ unsigned char continuous_sync_enable,
+ unsigned char pll_filter_enable,
+ unsigned char pll_filter_value);
typedef void (*PFN_DVICTRL_RESETCHIP)(void);
typedef char* (*PFN_DVICTRL_GETCHIPSTRING)(void);
typedef unsigned short (*PFN_DVICTRL_GETVENDORID)(void);
typedef unsigned short (*PFN_DVICTRL_GETDEVICEID)(void);
-typedef void (*PFN_DVICTRL_SETPOWER)(unsigned char powerUp);
-typedef void (*PFN_DVICTRL_HOTPLUGDETECTION)(unsigned char enableHotPlug);
+typedef void (*PFN_DVICTRL_SETPOWER)(unsigned char power_up);
+typedef void (*PFN_DVICTRL_HOTPLUGDETECTION)(unsigned char enable_hot_plug);
typedef unsigned char (*PFN_DVICTRL_ISCONNECTED)(void);
typedef unsigned char (*PFN_DVICTRL_CHECKINTERRUPT)(void);
typedef void (*PFN_DVICTRL_CLEARINTERRUPT)(void);
/* Structure to hold all the function pointer to the DVI Controller. */
struct dvi_ctrl_device {
- PFN_DVICTRL_INIT pfnInit;
- PFN_DVICTRL_RESETCHIP pfnResetChip;
- PFN_DVICTRL_GETCHIPSTRING pfnGetChipString;
- PFN_DVICTRL_GETVENDORID pfnGetVendorId;
- PFN_DVICTRL_GETDEVICEID pfnGetDeviceId;
- PFN_DVICTRL_SETPOWER pfnSetPower;
- PFN_DVICTRL_HOTPLUGDETECTION pfnEnableHotPlugDetection;
- PFN_DVICTRL_ISCONNECTED pfnIsConnected;
- PFN_DVICTRL_CHECKINTERRUPT pfnCheckInterrupt;
- PFN_DVICTRL_CLEARINTERRUPT pfnClearInterrupt;
+ PFN_DVICTRL_INIT pfn_init;
+ PFN_DVICTRL_RESETCHIP pfn_reset_chip;
+ PFN_DVICTRL_GETCHIPSTRING pfn_get_chip_string;
+ PFN_DVICTRL_GETVENDORID pfn_get_vendor_id;
+ PFN_DVICTRL_GETDEVICEID pfn_get_device_id;
+ PFN_DVICTRL_SETPOWER pfn_set_power;
+ PFN_DVICTRL_HOTPLUGDETECTION pfn_enable_hot_plug_detection;
+ PFN_DVICTRL_ISCONNECTED pfn_is_connected;
+ PFN_DVICTRL_CHECKINTERRUPT pfn_check_interrupt;
+ PFN_DVICTRL_CLEARINTERRUPT pfn_clear_interrupt;
};
#define DVI_CTRL_SII164
/* dvi functions prototype */
-int dviInit(unsigned char edgeSelect,
- unsigned char busSelect,
- unsigned char dualEdgeClkSelect,
- unsigned char hsyncEnable,
- unsigned char vsyncEnable,
- unsigned char deskewEnable,
- unsigned char deskewSetting,
- unsigned char continuousSyncEnable,
- unsigned char pllFilterEnable,
- unsigned char pllFilterValue);
+int dvi_init(unsigned char edge_select,
+ unsigned char bus_select,
+ unsigned char dual_edge_clk_select,
+ unsigned char hsync_enable,
+ unsigned char vsync_enable,
+ unsigned char deskew_enable,
+ unsigned char deskew_setting,
+ unsigned char continuous_sync_enable,
+ unsigned char pll_filter_enable,
+ unsigned char pll_filter_value);
#endif
diff --git a/drivers/staging/sm750fb/ddk750_sii164.c b/drivers/staging/sm750fb/ddk750_sii164.c
index 73e0e9f41ec5..781eceb2f402 100644
--- a/drivers/staging/sm750fb/ddk750_sii164.c
+++ b/drivers/staging/sm750fb/ddk750_sii164.c
@@ -12,11 +12,11 @@
#define USE_HW_I2C
#ifdef USE_HW_I2C
- #define i2cWriteReg sm750_hw_i2c_write_reg
- #define i2cReadReg sm750_hw_i2c_read_reg
+ #define i2c_write_reg sm750_hw_i2c_write_reg
+ #define i2c_read_reg sm750_hw_i2c_read_reg
#else
- #define i2cWriteReg sm750_sw_i2c_write_reg
- #define i2cReadReg sm750_sw_i2c_read_reg
+ #define i2c_write_reg sm750_sw_i2c_write_reg
+ #define i2c_read_reg sm750_sw_i2c_read_reg
#endif
/* SII164 Vendor and Device ID */
@@ -25,45 +25,45 @@
#ifdef SII164_FULL_FUNCTIONS
/* Name of the DVI Controller chip */
-static char *gDviCtrlChipName = "Silicon Image SiI 164";
+static char *g_dvi_ctrl_chip_name = "Silicon Image SiI 164";
#endif
/*
- * sii164GetVendorID
+ * sii164_get_vendor_id
* This function gets the vendor ID of the DVI controller chip.
*
* Output:
* Vendor ID
*/
-unsigned short sii164GetVendorID(void)
+unsigned short sii164_get_vendor_id(void)
{
- unsigned short vendorID;
+ unsigned short vendor_id;
- vendorID = ((unsigned short)i2cReadReg(SII164_I2C_ADDRESS,
+ vendor_id = ((unsigned short)i2c_read_reg(SII164_I2C_ADDRESS,
SII164_VENDOR_ID_HIGH) << 8) |
- (unsigned short)i2cReadReg(SII164_I2C_ADDRESS,
+ (unsigned short)i2c_read_reg(SII164_I2C_ADDRESS,
SII164_VENDOR_ID_LOW);
- return vendorID;
+ return vendor_id;
}
/*
- * sii164GetDeviceID
+ * sii164_get_gevice_id
* This function gets the device ID of the DVI controller chip.
*
* Output:
* Device ID
*/
-unsigned short sii164GetDeviceID(void)
+unsigned short sii164_get_device_id(void)
{
- unsigned short deviceID;
+ unsigned short device_id;
- deviceID = ((unsigned short)i2cReadReg(SII164_I2C_ADDRESS,
+ device_id = ((unsigned short)i2c_read_reg(SII164_I2C_ADDRESS,
SII164_DEVICE_ID_HIGH) << 8) |
- (unsigned short)i2cReadReg(SII164_I2C_ADDRESS,
+ (unsigned short)i2c_read_reg(SII164_I2C_ADDRESS,
SII164_DEVICE_ID_LOW);
- return deviceID;
+ return device_id;
}
/*
@@ -72,7 +72,7 @@ unsigned short sii164GetDeviceID(void)
*/
/*
- * sii164InitChip
+ * sii164_init_chip
* This function initialize and detect the DVI controller chip.
*
* Input:
@@ -118,16 +118,16 @@ unsigned short sii164GetDeviceID(void)
* 0 - Success
* -1 - Fail.
*/
-long sii164InitChip(unsigned char edge_select,
- unsigned char bus_select,
- unsigned char dual_edge_clk_select,
- unsigned char hsync_enable,
- unsigned char vsync_enable,
- unsigned char deskew_enable,
- unsigned char deskew_setting,
- unsigned char continuous_sync_enable,
- unsigned char pll_filter_enable,
- unsigned char pll_filter_value)
+long sii164_init_chip(unsigned char edge_select,
+ unsigned char bus_select,
+ unsigned char dual_edge_clk_select,
+ unsigned char hsync_enable,
+ unsigned char vsync_enable,
+ unsigned char deskew_enable,
+ unsigned char deskew_setting,
+ unsigned char continuous_sync_enable,
+ unsigned char pll_filter_enable,
+ unsigned char pll_filter_value)
{
unsigned char config;
@@ -140,8 +140,8 @@ long sii164InitChip(unsigned char edge_select,
#endif
/* Check if SII164 Chip exists */
- if ((sii164GetVendorID() == SII164_VENDOR_ID) &&
- (sii164GetDeviceID() == SII164_DEVICE_ID)) {
+ if ((sii164_get_vendor_id() == SII164_VENDOR_ID) &&
+ (sii164_get_device_id() == SII164_DEVICE_ID)) {
/*
* Initialize SII164 controller chip.
*/
@@ -176,7 +176,7 @@ long sii164InitChip(unsigned char edge_select,
else
config |= SII164_CONFIGURATION_VSYNC_AS_IS;
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
/*
* De-skew enabled with default 111b value.
@@ -214,7 +214,7 @@ long sii164InitChip(unsigned char edge_select,
config |= SII164_DESKEW_8_STEP;
break;
}
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_DESKEW, config);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_DESKEW, config);
/* Enable/Disable Continuous Sync. */
if (continuous_sync_enable == 0)
@@ -231,12 +231,12 @@ long sii164InitChip(unsigned char edge_select,
/* Set the PLL Filter value */
config |= ((pll_filter_value & 0x07) << 1);
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_PLL, config);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_PLL, config);
/* Recover from Power Down and enable output. */
- config = i2cReadReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION);
+ config = i2c_read_reg(SII164_I2C_ADDRESS, SII164_CONFIGURATION);
config |= SII164_CONFIGURATION_POWER_NORMAL;
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
return 0;
}
@@ -250,157 +250,156 @@ long sii164InitChip(unsigned char edge_select,
#ifdef SII164_FULL_FUNCTIONS
/*
- * sii164ResetChip
+ * sii164_reset_chip
* This function resets the DVI Controller Chip.
*/
-void sii164ResetChip(void)
+void sii164_reset_chip(void)
{
/* Power down */
- sii164SetPower(0);
- sii164SetPower(1);
+ sii164_set_power(0);
+ sii164_set_power(1);
}
/*
- * sii164GetChipString
+ * sii164_get_chip_string
* This function returns a char string name of the current DVI Controller
* chip.
*
* It's convenient for application need to display the chip name.
*/
-char *sii164GetChipString(void)
+char *sii164_get_chip_string(void)
{
- return gDviCtrlChipName;
+ return g_dvi_ctrl_chip_name;
}
/*
- * sii164SetPower
+ * sii164_set_power
* This function sets the power configuration of the DVI Controller Chip.
*
* Input:
- * powerUp - Flag to set the power down or up
+ * power_up - Flag to set the power down or up
*/
-void sii164SetPower(unsigned char powerUp)
+void sii164_set_power(unsigned char power_up)
{
unsigned char config;
- config = i2cReadReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION);
- if (powerUp == 1) {
+ config = i2c_read_reg(SII164_I2C_ADDRESS, SII164_CONFIGURATION);
+ if (power_up == 1) {
/* Power up the chip */
config &= ~SII164_CONFIGURATION_POWER_MASK;
config |= SII164_CONFIGURATION_POWER_NORMAL;
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
} else {
/* Power down the chip */
config &= ~SII164_CONFIGURATION_POWER_MASK;
config |= SII164_CONFIGURATION_POWER_DOWN;
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_CONFIGURATION, config);
}
}
/*
- * sii164SelectHotPlugDetectionMode
+ * sii164_select_hot_plug_detection_mode
* This function selects the mode of the hot plug detection.
*/
-static
-void sii164SelectHotPlugDetectionMode(enum sii164_hot_plug_mode hotPlugMode)
+static void sii164_select_hot_plug_detection_mode(enum sii164_hot_plug_mode hot_plug_mode)
{
- unsigned char detectReg;
+ unsigned char detect_reg;
- detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) &
+ detect_reg = i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT) &
~SII164_DETECT_MONITOR_SENSE_OUTPUT_FLAG;
- switch (hotPlugMode) {
+ switch (hot_plug_mode) {
case SII164_HOTPLUG_DISABLE:
- detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HIGH;
+ detect_reg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HIGH;
break;
case SII164_HOTPLUG_USE_MDI:
- detectReg &= ~SII164_DETECT_INTERRUPT_MASK;
- detectReg |= SII164_DETECT_INTERRUPT_BY_HTPLG_PIN;
- detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_MDI;
+ detect_reg &= ~SII164_DETECT_INTERRUPT_MASK;
+ detect_reg |= SII164_DETECT_INTERRUPT_BY_HTPLG_PIN;
+ detect_reg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_MDI;
break;
case SII164_HOTPLUG_USE_RSEN:
- detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_RSEN;
+ detect_reg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_RSEN;
break;
case SII164_HOTPLUG_USE_HTPLG:
- detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HTPLG;
+ detect_reg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HTPLG;
break;
}
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_DETECT, detectReg);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_DETECT, detect_reg);
}
/*
- * sii164EnableHotPlugDetection
+ * sii164_enable_hot_plug_detection
* This function enables the Hot Plug detection.
*
- * enableHotPlug - Enable (=1) / disable (=0) Hot Plug detection
+ * enable_hot_plug - Enable (=1) / disable (=0) Hot Plug detection
*/
-void sii164EnableHotPlugDetection(unsigned char enableHotPlug)
+void sii164_enable_hot_plug_detection(unsigned char enable_hot_plug)
{
- unsigned char detectReg;
+ unsigned char detect_reg;
- detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT);
+ detect_reg = i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT);
/* Depending on each DVI controller, need to enable the hot plug based
* on each individual chip design.
*/
- if (enableHotPlug != 0)
- sii164SelectHotPlugDetectionMode(SII164_HOTPLUG_USE_MDI);
+ if (enable_hot_plug != 0)
+ sii164_select_hot_plug_detection_mode(SII164_HOTPLUG_USE_MDI);
else
- sii164SelectHotPlugDetectionMode(SII164_HOTPLUG_DISABLE);
+ sii164_select_hot_plug_detection_mode(SII164_HOTPLUG_DISABLE);
}
/*
- * sii164IsConnected
+ * sii164_is_connected
* Check if the DVI Monitor is connected.
*
* Output:
* 0 - Not Connected
* 1 - Connected
*/
-unsigned char sii164IsConnected(void)
+unsigned char sii164_is_connected(void)
{
- unsigned char hotPlugValue;
+ unsigned char hot_plug_value;
- hotPlugValue = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) &
+ hot_plug_value = i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT) &
SII164_DETECT_HOT_PLUG_STATUS_MASK;
- if (hotPlugValue == SII164_DETECT_HOT_PLUG_STATUS_ON)
+ if (hot_plug_value == SII164_DETECT_HOT_PLUG_STATUS_ON)
return 1;
else
return 0;
}
/*
- * sii164CheckInterrupt
+ * sii164_check_interrupt
* Checks if interrupt has occurred.
*
* Output:
* 0 - No interrupt
* 1 - Interrupt occurs
*/
-unsigned char sii164CheckInterrupt(void)
+unsigned char sii164_check_interrupt(void)
{
- unsigned char detectReg;
+ unsigned char detect_reg;
- detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT) &
+ detect_reg = i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT) &
SII164_DETECT_MONITOR_STATE_MASK;
- if (detectReg == SII164_DETECT_MONITOR_STATE_CHANGE)
+ if (detect_reg == SII164_DETECT_MONITOR_STATE_CHANGE)
return 1;
else
return 0;
}
/*
- * sii164ClearInterrupt
+ * sii164_clear_interrupt
* Clear the hot plug interrupt.
*/
-void sii164ClearInterrupt(void)
+void sii164_clear_interrupt(void)
{
- unsigned char detectReg;
+ unsigned char detect_reg;
/* Clear the MDI interrupt */
- detectReg = i2cReadReg(SII164_I2C_ADDRESS, SII164_DETECT);
- i2cWriteReg(SII164_I2C_ADDRESS, SII164_DETECT,
- detectReg | SII164_DETECT_MONITOR_STATE_CLEAR);
+ detect_reg = i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT);
+ i2c_write_reg(SII164_I2C_ADDRESS, SII164_DETECT,
+ detect_reg | SII164_DETECT_MONITOR_STATE_CLEAR);
}
#endif
diff --git a/drivers/staging/sm750fb/ddk750_sii164.h b/drivers/staging/sm750fb/ddk750_sii164.h
index d940cb729066..737b0e4869ff 100644
--- a/drivers/staging/sm750fb/ddk750_sii164.h
+++ b/drivers/staging/sm750fb/ddk750_sii164.h
@@ -16,28 +16,28 @@ enum sii164_hot_plug_mode {
};
/* Silicon Image SiI164 chip prototype */
-long sii164InitChip(unsigned char edgeSelect,
- unsigned char busSelect,
- unsigned char dualEdgeClkSelect,
- unsigned char hsyncEnable,
- unsigned char vsyncEnable,
- unsigned char deskewEnable,
- unsigned char deskewSetting,
- unsigned char continuousSyncEnable,
- unsigned char pllFilterEnable,
- unsigned char pllFilterValue);
-
-unsigned short sii164GetVendorID(void);
-unsigned short sii164GetDeviceID(void);
+long sii164_init_chip(unsigned char edge_select,
+ unsigned char bus_select,
+ unsigned char dual_edge_clk_select,
+ unsigned char hsync_enable,
+ unsigned char vsync_enable,
+ unsigned char deskew_enable,
+ unsigned char deskew_setting,
+ unsigned char continuous_sync_enable,
+ unsigned char pll_filter_enable,
+ unsigned char pll_filter_value);
+
+unsigned short sii164_get_vendor_id(void);
+unsigned short sii164_get_device_id(void);
#ifdef SII164_FULL_FUNCTIONS
-void sii164ResetChip(void);
-char *sii164GetChipString(void);
-void sii164SetPower(unsigned char powerUp);
-void sii164EnableHotPlugDetection(unsigned char enableHotPlug);
-unsigned char sii164IsConnected(void);
-unsigned char sii164CheckInterrupt(void);
-void sii164ClearInterrupt(void);
+void sii164_reset_chip(void);
+char *sii164_get_chip_string(void);
+void sii164_set_power(unsigned char power_up);
+void sii164_enable_hot_plug_detection(unsigned char enable_hot_plug);
+unsigned char sii164_is_connected(void);
+unsigned char sii164_check_interrupt(void);
+void sii164_clear_interrupt(void);
#endif
/*
* below register definition is used for
--
2.20.1
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 2/3] sm750fb: Fix Avoid CamelCase
2019-12-08 13:28 [PATCH 1/3] sm750fb: Fix Avoid CamelCase Sven Leykauf
@ 2019-12-08 13:28 ` Sven Leykauf
2019-12-10 15:05 ` [PATCH 2/3] staging: " Greg KH
2019-12-08 13:29 ` [PATCH 3/3] sm750fb: Fix Overlong Line Issues Sven Leykauf
2019-12-10 14:09 ` [PATCH 1/3] sm750fb: Fix Avoid CamelCase Dan Carpenter
2 siblings, 1 reply; 5+ messages in thread
From: Sven Leykauf @ 2019-12-08 13:28 UTC (permalink / raw)
To: devel; +Cc: Daniel Bauer, Sven Leykauf, linux-kernel
Change names of variables and functions into proper names,
according to coding style.
Patch upholds compileability by considiering dependencies.
Co-developed-by: Daniel Bauer <daniel.j.bauer@fau.de>
Signed-off-by: Daniel Bauer <daniel.j.bauer@fau.de>
Signed-off-by: Sven Leykauf <sven_leykauf1@web.de>
---
drivers/staging/sm750fb/ddk750_mode.c | 86 +++++++--------
drivers/staging/sm750fb/ddk750_mode.h | 2 +-
drivers/staging/sm750fb/ddk750_power.h | 10 +-
drivers/staging/sm750fb/sm750.c | 144 ++++++++++++-------------
drivers/staging/sm750fb/sm750.h | 68 ++++++------
drivers/staging/sm750fb/sm750_accel.c | 142 ++++++++++++------------
drivers/staging/sm750fb/sm750_accel.h | 16 +--
drivers/staging/sm750fb/sm750_cursor.c | 18 ++--
drivers/staging/sm750fb/sm750_cursor.h | 12 +--
drivers/staging/sm750fb/sm750_hw.c | 72 ++++++-------
10 files changed, 285 insertions(+), 285 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_mode.c b/drivers/staging/sm750fb/ddk750_mode.c
index e00a6cb31947..b609fd9b4142 100644
--- a/drivers/staging/sm750fb/ddk750_mode.c
+++ b/drivers/staging/sm750fb/ddk750_mode.c
@@ -14,13 +14,13 @@
* in bit 29:27 of Display Control register.
*/
static unsigned long
-displayControlAdjust_SM750LE(struct mode_parameter *pModeParam,
- unsigned long dispControl)
+display_control_adjust_sm750le(struct mode_parameter *p_mode_param,
+ unsigned long disp_control)
{
unsigned long x, y;
- x = pModeParam->horizontal_display_end;
- y = pModeParam->vertical_display_end;
+ x = p_mode_param->horizontal_display_end;
+ y = p_mode_param->vertical_display_end;
/*
* SM750LE has to set up the top-left and bottom-right
@@ -42,41 +42,41 @@ displayControlAdjust_SM750LE(struct mode_parameter *pModeParam,
*/
/* Clear bit 29:27 of display control register */
- dispControl &= ~CRT_DISPLAY_CTRL_CLK_MASK;
+ disp_control &= ~CRT_DISPLAY_CTRL_CLK_MASK;
/* Set bit 29:27 of display control register for the right clock */
/* Note that SM750LE only need to supported 7 resolutions. */
if (x == 800 && y == 600)
- dispControl |= CRT_DISPLAY_CTRL_CLK_PLL41;
+ disp_control |= CRT_DISPLAY_CTRL_CLK_PLL41;
else if (x == 1024 && y == 768)
- dispControl |= CRT_DISPLAY_CTRL_CLK_PLL65;
+ disp_control |= CRT_DISPLAY_CTRL_CLK_PLL65;
else if (x == 1152 && y == 864)
- dispControl |= CRT_DISPLAY_CTRL_CLK_PLL80;
+ disp_control |= CRT_DISPLAY_CTRL_CLK_PLL80;
else if (x == 1280 && y == 768)
- dispControl |= CRT_DISPLAY_CTRL_CLK_PLL80;
+ disp_control |= CRT_DISPLAY_CTRL_CLK_PLL80;
else if (x == 1280 && y == 720)
- dispControl |= CRT_DISPLAY_CTRL_CLK_PLL74;
+ disp_control |= CRT_DISPLAY_CTRL_CLK_PLL74;
else if (x == 1280 && y == 960)
- dispControl |= CRT_DISPLAY_CTRL_CLK_PLL108;
+ disp_control |= CRT_DISPLAY_CTRL_CLK_PLL108;
else if (x == 1280 && y == 1024)
- dispControl |= CRT_DISPLAY_CTRL_CLK_PLL108;
+ disp_control |= CRT_DISPLAY_CTRL_CLK_PLL108;
else /* default to VGA clock */
- dispControl |= CRT_DISPLAY_CTRL_CLK_PLL25;
+ disp_control |= CRT_DISPLAY_CTRL_CLK_PLL25;
/* Set bit 25:24 of display controller */
- dispControl |= (CRT_DISPLAY_CTRL_CRTSELECT | CRT_DISPLAY_CTRL_RGBBIT);
+ disp_control |= (CRT_DISPLAY_CTRL_CRTSELECT | CRT_DISPLAY_CTRL_RGBBIT);
/* Set bit 14 of display controller */
- dispControl |= DISPLAY_CTRL_CLOCK_PHASE;
+ disp_control |= DISPLAY_CTRL_CLOCK_PHASE;
- poke32(CRT_DISPLAY_CTRL, dispControl);
+ poke32(CRT_DISPLAY_CTRL, disp_control);
- return dispControl;
+ return disp_control;
}
/* only timing related registers will be programed */
-static int programModeRegisters(struct mode_parameter *pModeParam,
- struct pll_value *pll)
+static int program_mode_registers(struct mode_parameter *p_mode_param,
+ struct pll_value *pll)
{
int ret = 0;
int cnt = 0;
@@ -86,46 +86,46 @@ static int programModeRegisters(struct mode_parameter *pModeParam,
/* programe secondary pixel clock */
poke32(CRT_PLL_CTRL, sm750_format_pll_reg(pll));
- tmp = ((pModeParam->horizontal_total - 1) <<
+ tmp = ((p_mode_param->horizontal_total - 1) <<
CRT_HORIZONTAL_TOTAL_TOTAL_SHIFT) &
CRT_HORIZONTAL_TOTAL_TOTAL_MASK;
- tmp |= (pModeParam->horizontal_display_end - 1) &
+ tmp |= (p_mode_param->horizontal_display_end - 1) &
CRT_HORIZONTAL_TOTAL_DISPLAY_END_MASK;
poke32(CRT_HORIZONTAL_TOTAL, tmp);
- tmp = (pModeParam->horizontal_sync_width <<
+ tmp = (p_mode_param->horizontal_sync_width <<
CRT_HORIZONTAL_SYNC_WIDTH_SHIFT) &
CRT_HORIZONTAL_SYNC_WIDTH_MASK;
- tmp |= (pModeParam->horizontal_sync_start - 1) &
+ tmp |= (p_mode_param->horizontal_sync_start - 1) &
CRT_HORIZONTAL_SYNC_START_MASK;
poke32(CRT_HORIZONTAL_SYNC, tmp);
- tmp = ((pModeParam->vertical_total - 1) <<
+ tmp = ((p_mode_param->vertical_total - 1) <<
CRT_VERTICAL_TOTAL_TOTAL_SHIFT) &
CRT_VERTICAL_TOTAL_TOTAL_MASK;
- tmp |= (pModeParam->vertical_display_end - 1) &
+ tmp |= (p_mode_param->vertical_display_end - 1) &
CRT_VERTICAL_TOTAL_DISPLAY_END_MASK;
poke32(CRT_VERTICAL_TOTAL, tmp);
- tmp = ((pModeParam->vertical_sync_height <<
+ tmp = ((p_mode_param->vertical_sync_height <<
CRT_VERTICAL_SYNC_HEIGHT_SHIFT)) &
CRT_VERTICAL_SYNC_HEIGHT_MASK;
- tmp |= (pModeParam->vertical_sync_start - 1) &
+ tmp |= (p_mode_param->vertical_sync_start - 1) &
CRT_VERTICAL_SYNC_START_MASK;
poke32(CRT_VERTICAL_SYNC, tmp);
tmp = DISPLAY_CTRL_TIMING | DISPLAY_CTRL_PLANE;
- if (pModeParam->vertical_sync_polarity)
+ if (p_mode_param->vertical_sync_polarity)
tmp |= DISPLAY_CTRL_VSYNC_PHASE;
- if (pModeParam->horizontal_sync_polarity)
+ if (p_mode_param->horizontal_sync_polarity)
tmp |= DISPLAY_CTRL_HSYNC_PHASE;
if (sm750_get_chip_type() == SM750LE) {
- displayControlAdjust_SM750LE(pModeParam, tmp);
+ display_control_adjust_sm750le(p_mode_param, tmp);
} else {
reg = peek32(CRT_DISPLAY_CTRL) &
~(DISPLAY_CTRL_VSYNC_PHASE |
@@ -140,40 +140,40 @@ static int programModeRegisters(struct mode_parameter *pModeParam,
poke32(PANEL_PLL_CTRL, sm750_format_pll_reg(pll));
- reg = ((pModeParam->horizontal_total - 1) <<
+ reg = ((p_mode_param->horizontal_total - 1) <<
PANEL_HORIZONTAL_TOTAL_TOTAL_SHIFT) &
PANEL_HORIZONTAL_TOTAL_TOTAL_MASK;
- reg |= ((pModeParam->horizontal_display_end - 1) &
+ reg |= ((p_mode_param->horizontal_display_end - 1) &
PANEL_HORIZONTAL_TOTAL_DISPLAY_END_MASK);
poke32(PANEL_HORIZONTAL_TOTAL, reg);
poke32(PANEL_HORIZONTAL_SYNC,
- ((pModeParam->horizontal_sync_width <<
+ ((p_mode_param->horizontal_sync_width <<
PANEL_HORIZONTAL_SYNC_WIDTH_SHIFT) &
PANEL_HORIZONTAL_SYNC_WIDTH_MASK) |
- ((pModeParam->horizontal_sync_start - 1) &
+ ((p_mode_param->horizontal_sync_start - 1) &
PANEL_HORIZONTAL_SYNC_START_MASK));
poke32(PANEL_VERTICAL_TOTAL,
- (((pModeParam->vertical_total - 1) <<
+ (((p_mode_param->vertical_total - 1) <<
PANEL_VERTICAL_TOTAL_TOTAL_SHIFT) &
PANEL_VERTICAL_TOTAL_TOTAL_MASK) |
- ((pModeParam->vertical_display_end - 1) &
+ ((p_mode_param->vertical_display_end - 1) &
PANEL_VERTICAL_TOTAL_DISPLAY_END_MASK));
poke32(PANEL_VERTICAL_SYNC,
- ((pModeParam->vertical_sync_height <<
+ ((p_mode_param->vertical_sync_height <<
PANEL_VERTICAL_SYNC_HEIGHT_SHIFT) &
PANEL_VERTICAL_SYNC_HEIGHT_MASK) |
- ((pModeParam->vertical_sync_start - 1) &
+ ((p_mode_param->vertical_sync_start - 1) &
PANEL_VERTICAL_SYNC_START_MASK));
tmp = DISPLAY_CTRL_TIMING | DISPLAY_CTRL_PLANE;
- if (pModeParam->vertical_sync_polarity)
+ if (p_mode_param->vertical_sync_polarity)
tmp |= DISPLAY_CTRL_VSYNC_PHASE;
- if (pModeParam->horizontal_sync_polarity)
+ if (p_mode_param->horizontal_sync_polarity)
tmp |= DISPLAY_CTRL_HSYNC_PHASE;
- if (pModeParam->clock_phase_polarity)
+ if (p_mode_param->clock_phase_polarity)
tmp |= DISPLAY_CTRL_CLOCK_PHASE;
reserved = PANEL_DISPLAY_CTRL_RESERVED_MASK |
@@ -207,7 +207,7 @@ static int programModeRegisters(struct mode_parameter *pModeParam,
return ret;
}
-int ddk750_setModeTiming(struct mode_parameter *parm, enum clock_type clock)
+int ddk750_set_mode_timing(struct mode_parameter *parm, enum clock_type clock)
{
struct pll_value pll;
@@ -220,6 +220,6 @@ int ddk750_setModeTiming(struct mode_parameter *parm, enum clock_type clock)
outb_p(0x88, 0x3d4);
outb_p(0x06, 0x3d5);
}
- programModeRegisters(parm, &pll);
+ program_mode_registers(parm, &pll);
return 0;
}
diff --git a/drivers/staging/sm750fb/ddk750_mode.h b/drivers/staging/sm750fb/ddk750_mode.h
index 2df78a0937b2..1b70885f85e5 100644
--- a/drivers/staging/sm750fb/ddk750_mode.h
+++ b/drivers/staging/sm750fb/ddk750_mode.h
@@ -33,5 +33,5 @@ struct mode_parameter {
enum spolarity clock_phase_polarity;
};
-int ddk750_setModeTiming(struct mode_parameter *parm, enum clock_type clock);
+int ddk750_set_mode_timing(struct mode_parameter *parm, enum clock_type clock);
#endif
diff --git a/drivers/staging/sm750fb/ddk750_power.h b/drivers/staging/sm750fb/ddk750_power.h
index 7002567a47d2..d43942d6a5aa 100644
--- a/drivers/staging/sm750fb/ddk750_power.h
+++ b/drivers/staging/sm750fb/ddk750_power.h
@@ -3,10 +3,10 @@
#define DDK750_POWER_H__
enum dpms {
- crtDPMS_ON = 0x0,
- crtDPMS_STANDBY = 0x1,
- crtDPMS_SUSPEND = 0x2,
- crtDPMS_OFF = 0x3,
+ CRT_DPMS_ON = 0x0,
+ CRT_DPMS_STANDBY = 0x1,
+ CRT_DPMS_SUSPEND = 0x2,
+ CRT_DPMS_OFF = 0x3,
};
#define set_DAC(off) { \
@@ -15,7 +15,7 @@ enum dpms {
}
void ddk750_set_dpms(enum dpms state);
-void sm750_set_power_mode(unsigned int powerMode);
+void sm750_set_power_mode(unsigned int power_mode);
void sm750_set_current_gate(unsigned int gate);
/*
diff --git a/drivers/staging/sm750fb/sm750.c b/drivers/staging/sm750fb/sm750.c
index 59568d18ce23..8833f49a96f5 100644
--- a/drivers/staging/sm750fb/sm750.c
+++ b/drivers/staging/sm750fb/sm750.c
@@ -112,22 +112,22 @@ static int lynxfb_ops_cursor(struct fb_info *info, struct fb_cursor *fbcursor)
crtc = &par->crtc;
cursor = &crtc->cursor;
- if (fbcursor->image.width > cursor->maxW ||
- fbcursor->image.height > cursor->maxH ||
+ if (fbcursor->image.width > cursor->max_w ||
+ fbcursor->image.height > cursor->max_h ||
fbcursor->image.depth > 1) {
return -ENXIO;
}
sm750_hw_cursor_disable(cursor);
if (fbcursor->set & FB_CUR_SETSIZE)
- sm750_hw_cursor_setSize(cursor,
- fbcursor->image.width,
- fbcursor->image.height);
+ sm750_hw_cursor_set_size(cursor,
+ fbcursor->image.width,
+ fbcursor->image.height);
if (fbcursor->set & FB_CUR_SETPOS)
- sm750_hw_cursor_setPos(cursor,
- fbcursor->image.dx - info->var.xoffset,
- fbcursor->image.dy - info->var.yoffset);
+ sm750_hw_cursor_set_pos(cursor,
+ fbcursor->image.dx - info->var.xoffset,
+ fbcursor->image.dy - info->var.yoffset);
if (fbcursor->set & FB_CUR_SETCMAP) {
/* get the 16bit color of kernel means */
@@ -141,14 +141,14 @@ static int lynxfb_ops_cursor(struct fb_info *info, struct fb_cursor *fbcursor)
((info->cmap.green[fbcursor->image.bg_color] & 0xfc00) >> 5) |
((info->cmap.blue[fbcursor->image.bg_color] & 0xf800) >> 11);
- sm750_hw_cursor_setColor(cursor, fg, bg);
+ sm750_hw_cursor_set_color(cursor, fg, bg);
}
if (fbcursor->set & (FB_CUR_SETSHAPE | FB_CUR_SETIMAGE)) {
- sm750_hw_cursor_setData(cursor,
- fbcursor->rop,
- fbcursor->image.data,
- fbcursor->mask);
+ sm750_hw_cursor_set_data(cursor,
+ fbcursor->rop,
+ fbcursor->image.data,
+ fbcursor->mask);
}
if (fbcursor->enable)
@@ -162,7 +162,7 @@ static void lynxfb_ops_fillrect(struct fb_info *info,
{
struct lynxfb_par *par;
struct sm750_dev *sm750_dev;
- unsigned int base, pitch, Bpp, rop;
+ unsigned int base, pitch, bpp, rop;
u32 color;
if (info->state != FBINFO_STATE_RUNNING)
@@ -175,11 +175,11 @@ static void lynxfb_ops_fillrect(struct fb_info *info,
* each time 2d function begin to work,below three variable always need
* be set, seems we can put them together in some place
*/
- base = par->crtc.oScreen;
+ base = par->crtc.o_screen;
pitch = info->fix.line_length;
- Bpp = info->var.bits_per_pixel >> 3;
+ bpp = info->var.bits_per_pixel >> 3;
- color = (Bpp == 1) ? region->color :
+ color = (bpp == 1) ? region->color :
((u32 *)info->pseudo_palette)[region->color];
rop = (region->rop != ROP_COPY) ? HW_ROP2_XOR : HW_ROP2_COPY;
@@ -192,7 +192,7 @@ static void lynxfb_ops_fillrect(struct fb_info *info,
spin_lock(&sm750_dev->slock);
sm750_dev->accel.de_fillrect(&sm750_dev->accel,
- base, pitch, Bpp,
+ base, pitch, bpp,
region->dx, region->dy,
region->width, region->height,
color, rop);
@@ -204,7 +204,7 @@ static void lynxfb_ops_copyarea(struct fb_info *info,
{
struct lynxfb_par *par;
struct sm750_dev *sm750_dev;
- unsigned int base, pitch, Bpp;
+ unsigned int base, pitch, bpp;
par = info->par;
sm750_dev = par->dev;
@@ -213,9 +213,9 @@ static void lynxfb_ops_copyarea(struct fb_info *info,
* each time 2d function begin to work,below three variable always need
* be set, seems we can put them together in some place
*/
- base = par->crtc.oScreen;
+ base = par->crtc.o_screen;
pitch = info->fix.line_length;
- Bpp = info->var.bits_per_pixel >> 3;
+ bpp = info->var.bits_per_pixel >> 3;
/*
* If not use spin_lock, system will die if user load driver
@@ -227,7 +227,7 @@ static void lynxfb_ops_copyarea(struct fb_info *info,
sm750_dev->accel.de_copyarea(&sm750_dev->accel,
base, pitch, region->sx, region->sy,
- base, pitch, Bpp, region->dx, region->dy,
+ base, pitch, bpp, region->dx, region->dy,
region->width, region->height,
HW_ROP2_COPY);
spin_unlock(&sm750_dev->slock);
@@ -236,7 +236,7 @@ static void lynxfb_ops_copyarea(struct fb_info *info,
static void lynxfb_ops_imageblit(struct fb_info *info,
const struct fb_image *image)
{
- unsigned int base, pitch, Bpp;
+ unsigned int base, pitch, bpp;
unsigned int fgcol, bgcol;
struct lynxfb_par *par;
struct sm750_dev *sm750_dev;
@@ -247,9 +247,9 @@ static void lynxfb_ops_imageblit(struct fb_info *info,
* each time 2d function begin to work,below three variable always need
* be set, seems we can put them together in some place
*/
- base = par->crtc.oScreen;
+ base = par->crtc.o_screen;
pitch = info->fix.line_length;
- Bpp = info->var.bits_per_pixel >> 3;
+ bpp = info->var.bits_per_pixel >> 3;
/* TODO: Implement hardware acceleration for image->depth > 1 */
if (image->depth != 1) {
@@ -276,7 +276,7 @@ static void lynxfb_ops_imageblit(struct fb_info *info,
sm750_dev->accel.de_imageblit(&sm750_dev->accel,
image->data, image->width >> 3, 0,
- base, pitch, Bpp,
+ base, pitch, bpp,
image->dx, image->dy,
image->width, image->height,
fgcol, bgcol, HW_ROP2_COPY);
@@ -372,9 +372,9 @@ static int lynxfb_ops_set_par(struct fb_info *info)
pr_err("pixel bpp format not satisfied\n.");
return ret;
}
- ret = hw_sm750_crtc_setMode(crtc, var, fix);
+ ret = hw_sm750_crtc_set_mode(crtc, var, fix);
if (!ret)
- ret = hw_sm750_output_setMode(output, var, fix);
+ ret = hw_sm750_output_set_mode(output, var, fix);
return ret;
}
@@ -483,7 +483,7 @@ static int lynxfb_resume(struct pci_dev *pdev)
crtc = &par->crtc;
cursor = &crtc->cursor;
memset_io(cursor->vstart, 0x0, cursor->size);
- memset_io(crtc->vScreen, 0x0, crtc->vidmem_size);
+ memset_io(crtc->v_screen, 0x0, crtc->vidmem_size);
lynxfb_ops_set_par(info);
fb_set_suspend(info, 0);
}
@@ -495,7 +495,7 @@ static int lynxfb_resume(struct pci_dev *pdev)
crtc = &par->crtc;
cursor = &crtc->cursor;
memset_io(cursor->vstart, 0x0, cursor->size);
- memset_io(crtc->vScreen, 0x0, crtc->vidmem_size);
+ memset_io(crtc->v_screen, 0x0, crtc->vidmem_size);
lynxfb_ops_set_par(info);
fb_set_suspend(info, 0);
}
@@ -574,7 +574,7 @@ static int lynxfb_ops_check_var(struct fb_var_screeninfo *var,
return -ENOMEM;
}
- return hw_sm750_crtc_checkMode(crtc, var);
+ return hw_sm750_crtc_check_mode(crtc, var);
}
static int lynxfb_ops_setcolreg(unsigned int regno,
@@ -607,7 +607,7 @@ static int lynxfb_ops_setcolreg(unsigned int regno,
red >>= 8;
green >>= 8;
blue >>= 8;
- ret = hw_sm750_setColReg(crtc, regno, red, green, blue);
+ ret = hw_sm750_set_col_reg(crtc, regno, red, green, blue);
goto exit;
}
@@ -639,7 +639,7 @@ static int lynxfb_ops_blank(int blank, struct fb_info *info)
pr_debug("blank = %d.\n", blank);
par = info->par;
output = &par->output;
- return output->proc_setBLANK(output, blank);
+ return output->proc_set_blank(output, blank);
}
static int sm750fb_set_drv(struct lynxfb_par *par)
@@ -660,58 +660,58 @@ static int sm750fb_set_drv(struct lynxfb_par *par)
crtc->vidmem_size >>= 1;
/* setup crtc and output member */
- sm750_dev->hwCursor = g_hwcursor;
+ sm750_dev->hw_cursor = g_hwcursor;
crtc->line_pad = 16;
crtc->xpanstep = 8;
crtc->ypanstep = 1;
crtc->ywrapstep = 0;
- output->proc_setBLANK = (sm750_dev->revid == SM750LE_REVISION_ID) ?
- hw_sm750le_setBLANK : hw_sm750_setBLANK;
+ output->proc_set_blank = (sm750_dev->revid == SM750LE_REVISION_ID) ?
+ hw_sm750le_set_blank : hw_sm750_set_blank;
/* chip specific phase */
sm750_dev->accel.de_wait = (sm750_dev->revid == SM750LE_REVISION_ID) ?
- hw_sm750le_deWait : hw_sm750_deWait;
+ hw_sm750le_de_wait : hw_sm750_de_wait;
switch (sm750_dev->dataflow) {
case sm750_simul_pri:
output->paths = sm750_pnc;
crtc->channel = sm750_primary;
- crtc->oScreen = 0;
- crtc->vScreen = sm750_dev->pvMem;
+ crtc->o_screen = 0;
+ crtc->v_screen = sm750_dev->pv_mem;
pr_info("use simul primary mode\n");
break;
case sm750_simul_sec:
output->paths = sm750_pnc;
crtc->channel = sm750_secondary;
- crtc->oScreen = 0;
- crtc->vScreen = sm750_dev->pvMem;
+ crtc->o_screen = 0;
+ crtc->v_screen = sm750_dev->pv_mem;
break;
case sm750_dual_normal:
if (par->index == 0) {
output->paths = sm750_panel;
crtc->channel = sm750_primary;
- crtc->oScreen = 0;
- crtc->vScreen = sm750_dev->pvMem;
+ crtc->o_screen = 0;
+ crtc->v_screen = sm750_dev->pv_mem;
} else {
output->paths = sm750_crt;
crtc->channel = sm750_secondary;
- /* not consider of padding stuffs for oScreen,need fix */
- crtc->oScreen = sm750_dev->vidmem_size >> 1;
- crtc->vScreen = sm750_dev->pvMem + crtc->oScreen;
+ /* not consider of padding stuffs for o_screen,need fix */
+ crtc->o_screen = sm750_dev->vidmem_size >> 1;
+ crtc->v_screen = sm750_dev->pv_mem + crtc->o_screen;
}
break;
case sm750_dual_swap:
if (par->index == 0) {
output->paths = sm750_panel;
crtc->channel = sm750_secondary;
- crtc->oScreen = 0;
- crtc->vScreen = sm750_dev->pvMem;
+ crtc->o_screen = 0;
+ crtc->v_screen = sm750_dev->pv_mem;
} else {
output->paths = sm750_crt;
crtc->channel = sm750_primary;
- /* not consider of padding stuffs for oScreen,need fix */
- crtc->oScreen = sm750_dev->vidmem_size >> 1;
- crtc->vScreen = sm750_dev->pvMem + crtc->oScreen;
+ /* not consider of padding stuffs for o_screen,need fix */
+ crtc->o_screen = sm750_dev->vidmem_size >> 1;
+ crtc->v_screen = sm750_dev->pv_mem + crtc->o_screen;
}
break;
default:
@@ -754,7 +754,7 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
"kernel HELPERS prepared vesa_modes",
};
- static const char *fixId[2] = {
+ static const char *fix_id[2] = {
"sm750_fb1", "sm750_fb2",
};
@@ -778,14 +778,14 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
* set current cursor variable and proc pointer,
* must be set after crtc member initialized
*/
- crtc->cursor.offset = crtc->oScreen + crtc->vidmem_size - 1024;
- crtc->cursor.mmio = sm750_dev->pvReg +
+ crtc->cursor.offset = crtc->o_screen + crtc->vidmem_size - 1024;
+ crtc->cursor.mmio = sm750_dev->pv_reg +
0x800f0 + (int)crtc->channel * 0x140;
pr_info("crtc->cursor.mmio = %p\n", crtc->cursor.mmio);
- crtc->cursor.maxH = crtc->cursor.maxW = 64;
- crtc->cursor.size = crtc->cursor.maxH * crtc->cursor.maxW * 2 / 8;
- crtc->cursor.vstart = sm750_dev->pvMem + crtc->cursor.offset;
+ crtc->cursor.max_h = crtc->cursor.max_w = 64;
+ crtc->cursor.size = crtc->cursor.max_h * crtc->cursor.max_w * 2 / 8;
+ crtc->cursor.vstart = sm750_dev->pv_mem + crtc->cursor.offset;
memset_io(crtc->cursor.vstart, 0, crtc->cursor.size);
if (!g_hwcursor) {
@@ -861,7 +861,7 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
crtc->line_pad);
info->pseudo_palette = &par->pseudo_palette[0];
- info->screen_base = crtc->vScreen;
+ info->screen_base = crtc->v_screen;
pr_debug("screen_base vaddr = %p\n", info->screen_base);
info->screen_size = line_length * var->yres_virtual;
info->flags = FBINFO_FLAG_DEFAULT | 0;
@@ -874,9 +874,9 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
fix->ywrapstep = crtc->ywrapstep;
fix->accel = FB_ACCEL_SMI;
- strlcpy(fix->id, fixId[index], sizeof(fix->id));
+ strlcpy(fix->id, fix_id[index], sizeof(fix->id));
- fix->smem_start = crtc->oScreen + sm750_dev->vidmem_start;
+ fix->smem_start = crtc->o_screen + sm750_dev->vidmem_start;
pr_info("fix->smem_start = %lx\n", fix->smem_start);
/*
* according to mmap experiment from user space application,
@@ -937,12 +937,12 @@ static void sm750fb_setup(struct sm750_dev *sm750_dev, char *src)
swap = 0;
- sm750_dev->initParm.chip_clk = 0;
- sm750_dev->initParm.mem_clk = 0;
- sm750_dev->initParm.master_clk = 0;
- sm750_dev->initParm.powerMode = 0;
- sm750_dev->initParm.setAllEngOff = 0;
- sm750_dev->initParm.resetMemory = 1;
+ sm750_dev->init_parm.chip_clk = 0;
+ sm750_dev->init_parm.mem_clk = 0;
+ sm750_dev->init_parm.master_clk = 0;
+ sm750_dev->init_parm.power_mode = 0;
+ sm750_dev->init_parm.set_all_eng_off = 0;
+ sm750_dev->init_parm.reset_memory = 1;
/* defaultly turn g_hwcursor on for both view */
g_hwcursor = 3;
@@ -961,11 +961,11 @@ static void sm750fb_setup(struct sm750_dev *sm750_dev, char *src)
} else if (!strncmp(opt, "nocrt", strlen("nocrt"))) {
sm750_dev->nocrt = 1;
} else if (!strncmp(opt, "36bit", strlen("36bit"))) {
- sm750_dev->pnltype = sm750_doubleTFT;
+ sm750_dev->pnltype = sm750_double_tft;
} else if (!strncmp(opt, "18bit", strlen("18bit"))) {
- sm750_dev->pnltype = sm750_dualTFT;
+ sm750_dev->pnltype = sm750_dual_tft;
} else if (!strncmp(opt, "24bit", strlen("24bit"))) {
- sm750_dev->pnltype = sm750_24TFT;
+ sm750_dev->pnltype = sm750_24_tft;
} else if (!strncmp(opt, "nohwc0", strlen("nohwc0"))) {
g_hwcursor &= ~0x1;
} else if (!strncmp(opt, "nohwc1", strlen("nohwc1"))) {
@@ -1128,7 +1128,7 @@ static int lynxfb_pci_probe(struct pci_dev *pdev,
sm750_dev->mtrr.vram = arch_phys_wc_add(sm750_dev->vidmem_start,
sm750_dev->vidmem_size);
- memset_io(sm750_dev->pvMem, 0, sm750_dev->vidmem_size);
+ memset_io(sm750_dev->pv_mem, 0, sm750_dev->vidmem_size);
pci_set_drvdata(pdev, sm750_dev);
@@ -1159,8 +1159,8 @@ static void lynxfb_pci_remove(struct pci_dev *pdev)
sm750fb_framebuffer_release(sm750_dev);
arch_phys_wc_del(sm750_dev->mtrr.vram);
- iounmap(sm750_dev->pvReg);
- iounmap(sm750_dev->pvMem);
+ iounmap(sm750_dev->pv_reg);
+ iounmap(sm750_dev->pv_mem);
kfree(g_settings);
}
diff --git a/drivers/staging/sm750fb/sm750.h b/drivers/staging/sm750fb/sm750.h
index ce90adcb449d..985854f565e6 100644
--- a/drivers/staging/sm750fb/sm750.h
+++ b/drivers/staging/sm750fb/sm750.h
@@ -13,9 +13,9 @@
#endif
enum sm750_pnltype {
- sm750_24TFT = 0, /* 24bit tft */
- sm750_dualTFT = 2, /* dual 18 bit tft */
- sm750_doubleTFT = 1, /* 36 bit double pixel tft */
+ sm750_24_tft = 0, /* 24bit tft */
+ sm750_dual_tft = 2, /* dual 18 bit tft */
+ sm750_double_tft = 1, /* 36 bit double pixel tft */
};
/* vga channel is not concerned */
@@ -39,20 +39,20 @@ enum sm750_path {
};
struct init_status {
- ushort powerMode;
+ ushort power_mode;
/* below three clocks are in unit of MHZ*/
ushort chip_clk;
ushort mem_clk;
ushort master_clk;
- ushort setAllEngOff;
- ushort resetMemory;
+ ushort set_all_eng_off;
+ ushort reset_memory;
};
struct lynx_accel {
/* base virtual address of DPR registers */
- volatile unsigned char __iomem *dprBase;
+ volatile unsigned char __iomem *dpr_base;
/* base virtual address of de data port */
- volatile unsigned char __iomem *dpPortBase;
+ volatile unsigned char __iomem *dp_port_base;
/* function pointers */
void (*de_init)(struct lynx_accel *);
@@ -90,12 +90,12 @@ struct sm750_dev {
unsigned long vidreg_start;
__u32 vidmem_size;
__u32 vidreg_size;
- void __iomem *pvReg;
- unsigned char __iomem *pvMem;
+ void __iomem *pv_reg;
+ unsigned char __iomem *pv_mem;
/* locks*/
spinlock_t slock;
- struct init_status initParm;
+ struct init_status init_parm;
enum sm750_pnltype pnltype;
enum sm750_dataflow dataflow;
int nocrt;
@@ -106,7 +106,7 @@ struct sm750_dev {
* 2: secondary crtc hw cursor enabled
* 3: both ctrc hw cursor enabled
*/
- int hwCursor;
+ int hw_cursor;
};
struct lynx_cursor {
@@ -115,8 +115,8 @@ struct lynx_cursor {
int h;
int size;
/* hardware limitation */
- int maxW;
- int maxH;
+ int max_w;
+ int max_h;
/* base virtual address and offset of cursor image */
char __iomem *vstart;
int offset;
@@ -125,10 +125,10 @@ struct lynx_cursor {
};
struct lynxfb_crtc {
- unsigned char __iomem *vCursor; /* virtual address of cursor */
- unsigned char __iomem *vScreen; /* virtual address of on_screen */
- int oCursor; /* cursor address offset in vidmem */
- int oScreen; /* onscreen address offset in vidmem */
+ unsigned char __iomem *v_cursor; /* virtual address of cursor */
+ unsigned char __iomem *v_screen; /* virtual address of on_screen */
+ int o_cursor; /* cursor address offset in vidmem */
+ int o_screen; /* onscreen address offset in vidmem */
int channel;/* which channel this crtc stands for*/
resource_size_t vidmem_size;/* this view's video memory max size */
@@ -163,7 +163,7 @@ struct lynxfb_output {
*/
void *priv;
- int (*proc_setBLANK)(struct lynxfb_output*, int);
+ int (*proc_set_blank)(struct lynxfb_output*, int);
};
struct lynxfb_par {
@@ -186,26 +186,26 @@ static inline unsigned long ps_to_hz(unsigned int psvalue)
int hw_sm750_map(struct sm750_dev *sm750_dev, struct pci_dev *pdev);
int hw_sm750_inithw(struct sm750_dev *sm750_dev, struct pci_dev *pdev);
-void hw_sm750_initAccel(struct sm750_dev *sm750_dev);
-int hw_sm750_deWait(void);
-int hw_sm750le_deWait(void);
+void hw_sm750_init_accel(struct sm750_dev *sm750_dev);
+int hw_sm750_de_wait(void);
+int hw_sm750le_de_wait(void);
-int hw_sm750_output_setMode(struct lynxfb_output *output,
- struct fb_var_screeninfo *var,
- struct fb_fix_screeninfo *fix);
+int hw_sm750_output_set_mode(struct lynxfb_output *output,
+ struct fb_var_screeninfo *var,
+ struct fb_fix_screeninfo *fix);
-int hw_sm750_crtc_checkMode(struct lynxfb_crtc *crtc,
- struct fb_var_screeninfo *var);
+int hw_sm750_crtc_check_mode(struct lynxfb_crtc *crtc,
+ struct fb_var_screeninfo *var);
-int hw_sm750_crtc_setMode(struct lynxfb_crtc *crtc,
- struct fb_var_screeninfo *var,
- struct fb_fix_screeninfo *fix);
+int hw_sm750_crtc_set_mode(struct lynxfb_crtc *crtc,
+ struct fb_var_screeninfo *var,
+ struct fb_fix_screeninfo *fix);
-int hw_sm750_setColReg(struct lynxfb_crtc *crtc, ushort index,
- ushort red, ushort green, ushort blue);
+int hw_sm750_set_col_reg(struct lynxfb_crtc *crtc, ushort index,
+ ushort red, ushort green, ushort blue);
-int hw_sm750_setBLANK(struct lynxfb_output *output, int blank);
-int hw_sm750le_setBLANK(struct lynxfb_output *output, int blank);
+int hw_sm750_set_blank(struct lynxfb_output *output, int blank);
+int hw_sm750le_set_blank(struct lynxfb_output *output, int blank);
int hw_sm750_pan_display(struct lynxfb_crtc *crtc,
const struct fb_var_screeninfo *var,
const struct fb_info *info);
diff --git a/drivers/staging/sm750fb/sm750_accel.c b/drivers/staging/sm750fb/sm750_accel.c
index 8faa601c700b..d1f940120721 100644
--- a/drivers/staging/sm750fb/sm750_accel.c
+++ b/drivers/staging/sm750fb/sm750_accel.c
@@ -18,19 +18,19 @@
#include "sm750.h"
#include "sm750_accel.h"
-static inline void write_dpr(struct lynx_accel *accel, int offset, u32 regValue)
+static inline void write_dpr(struct lynx_accel *accel, int offset, u32 reg_value)
{
- writel(regValue, accel->dprBase + offset);
+ writel(reg_value, accel->dpr_base + offset);
}
static inline u32 read_dpr(struct lynx_accel *accel, int offset)
{
- return readl(accel->dprBase + offset);
+ return readl(accel->dpr_base + offset);
}
-static inline void write_dpPort(struct lynx_accel *accel, u32 data)
+static inline void write_dp_port(struct lynx_accel *accel, u32 data)
{
- writel(data, accel->dpPortBase);
+ writel(data, accel->dp_port_base);
}
void sm750_hw_de_init(struct lynx_accel *accel)
@@ -86,11 +86,11 @@ void sm750_hw_set2dformat(struct lynx_accel *accel, int fmt)
}
int sm750_hw_fillrect(struct lynx_accel *accel,
- u32 base, u32 pitch, u32 Bpp,
+ u32 base, u32 pitch, u32 bpp,
u32 x, u32 y, u32 width, u32 height,
u32 color, u32 rop)
{
- u32 deCtrl;
+ u32 de_ctrl;
if (accel->de_wait() != 0) {
/*
@@ -103,14 +103,14 @@ int sm750_hw_fillrect(struct lynx_accel *accel,
write_dpr(accel, DE_WINDOW_DESTINATION_BASE, base); /* dpr40 */
write_dpr(accel, DE_PITCH,
- ((pitch / Bpp << DE_PITCH_DESTINATION_SHIFT) &
+ ((pitch / bpp << DE_PITCH_DESTINATION_SHIFT) &
DE_PITCH_DESTINATION_MASK) |
- (pitch / Bpp & DE_PITCH_SOURCE_MASK)); /* dpr10 */
+ (pitch / bpp & DE_PITCH_SOURCE_MASK)); /* dpr10 */
write_dpr(accel, DE_WINDOW_WIDTH,
- ((pitch / Bpp << DE_WINDOW_WIDTH_DST_SHIFT) &
+ ((pitch / bpp << DE_WINDOW_WIDTH_DST_SHIFT) &
DE_WINDOW_WIDTH_DST_MASK) |
- (pitch / Bpp & DE_WINDOW_WIDTH_SRC_MASK)); /* dpr44 */
+ (pitch / bpp & DE_WINDOW_WIDTH_SRC_MASK)); /* dpr44 */
write_dpr(accel, DE_FOREGROUND, color); /* DPR14 */
@@ -122,23 +122,23 @@ int sm750_hw_fillrect(struct lynx_accel *accel,
((width << DE_DIMENSION_X_SHIFT) & DE_DIMENSION_X_MASK) |
(height & DE_DIMENSION_Y_ET_MASK)); /* dpr8 */
- deCtrl = DE_CONTROL_STATUS | DE_CONTROL_LAST_PIXEL |
+ de_ctrl = DE_CONTROL_STATUS | DE_CONTROL_LAST_PIXEL |
DE_CONTROL_COMMAND_RECTANGLE_FILL | DE_CONTROL_ROP_SELECT |
(rop & DE_CONTROL_ROP_MASK); /* dpr0xc */
- write_dpr(accel, DE_CONTROL, deCtrl);
+ write_dpr(accel, DE_CONTROL, de_ctrl);
return 0;
}
/**
* sm750_hm_copyarea
- * @sBase: Address of source: offset in frame buffer
- * @sPitch: Pitch value of source surface in BYTE
+ * @s_base: Address of source: offset in frame buffer
+ * @s_pitch: Pitch value of source surface in BYTE
* @sx: Starting x coordinate of source surface
* @sy: Starting y coordinate of source surface
- * @dBase: Address of destination: offset in frame buffer
- * @dPitch: Pitch value of destination surface in BYTE
- * @Bpp: Color depth of destination surface
+ * @d_base: Address of destination: offset in frame buffer
+ * @d_pitch: Pitch value of destination surface in BYTE
+ * @bpp: Color depth of destination surface
* @dx: Starting x coordinate of destination surface
* @dy: Starting y coordinate of destination surface
* @width: width of rectangle in pixel value
@@ -146,21 +146,21 @@ int sm750_hw_fillrect(struct lynx_accel *accel,
* @rop2: ROP value
*/
int sm750_hw_copyarea(struct lynx_accel *accel,
- unsigned int sBase, unsigned int sPitch,
+ unsigned int s_base, unsigned int s_pitch,
unsigned int sx, unsigned int sy,
- unsigned int dBase, unsigned int dPitch,
- unsigned int Bpp, unsigned int dx, unsigned int dy,
+ unsigned int d_base, unsigned int d_pitch,
+ unsigned int bpp, unsigned int dx, unsigned int dy,
unsigned int width, unsigned int height,
unsigned int rop2)
{
- unsigned int nDirection, de_ctrl;
+ unsigned int n_direction, de_ctrl;
- nDirection = LEFT_TO_RIGHT;
+ n_direction = LEFT_TO_RIGHT;
/* Direction of ROP2 operation: 1 = Left to Right, (-1) = Right to Left */
de_ctrl = 0;
/* If source and destination are the same surface, need to check for overlay cases */
- if (sBase == dBase && sPitch == dPitch) {
+ if (s_base == d_base && s_pitch == d_pitch) {
/* Determine direction of operation */
if (sy < dy) {
/* +----------+
@@ -173,7 +173,7 @@ int sm750_hw_copyarea(struct lynx_accel *accel,
* +----------+
*/
- nDirection = BOTTOM_TO_TOP;
+ n_direction = BOTTOM_TO_TOP;
} else if (sy > dy) {
/* +----------+
* |D |
@@ -185,7 +185,7 @@ int sm750_hw_copyarea(struct lynx_accel *accel,
* +----------+
*/
- nDirection = TOP_TO_BOTTOM;
+ n_direction = TOP_TO_BOTTOM;
} else {
/* sy == dy */
@@ -198,7 +198,7 @@ int sm750_hw_copyarea(struct lynx_accel *accel,
* +------+---+------+
*/
- nDirection = RIGHT_TO_LEFT;
+ n_direction = RIGHT_TO_LEFT;
} else {
/* sx > dx */
@@ -210,12 +210,12 @@ int sm750_hw_copyarea(struct lynx_accel *accel,
* +------+---+------+
*/
- nDirection = LEFT_TO_RIGHT;
+ n_direction = LEFT_TO_RIGHT;
}
}
}
- if ((nDirection == BOTTOM_TO_TOP) || (nDirection == RIGHT_TO_LEFT)) {
+ if ((n_direction == BOTTOM_TO_TOP) || (n_direction == RIGHT_TO_LEFT)) {
sx += width - 1;
sy += height - 1;
dx += width - 1;
@@ -226,7 +226,7 @@ int sm750_hw_copyarea(struct lynx_accel *accel,
* Note:
* DE_FOREGROUND and DE_BACKGROUND are don't care.
* DE_COLOR_COMPARE and DE_COLOR_COMPARE_MAKS
- * are set by set deSetTransparency().
+ * are set by set de_set_transparency().
*/
/*
@@ -234,14 +234,14 @@ int sm750_hw_copyarea(struct lynx_accel *accel,
* It is an address offset (128 bit aligned)
* from the beginning of frame buffer.
*/
- write_dpr(accel, DE_WINDOW_SOURCE_BASE, sBase); /* dpr40 */
+ write_dpr(accel, DE_WINDOW_SOURCE_BASE, s_base); /* dpr40 */
/*
* 2D Destination Base.
* It is an address offset (128 bit aligned)
* from the beginning of frame buffer.
*/
- write_dpr(accel, DE_WINDOW_DESTINATION_BASE, dBase); /* dpr44 */
+ write_dpr(accel, DE_WINDOW_DESTINATION_BASE, d_base); /* dpr44 */
/*
* Program pitch (distance between the 1st points of two adjacent lines).
@@ -249,9 +249,9 @@ int sm750_hw_copyarea(struct lynx_accel *accel,
* pixel values. Need Byte to pixel conversion.
*/
write_dpr(accel, DE_PITCH,
- ((dPitch / Bpp << DE_PITCH_DESTINATION_SHIFT) &
+ ((d_pitch / bpp << DE_PITCH_DESTINATION_SHIFT) &
DE_PITCH_DESTINATION_MASK) |
- (sPitch / Bpp & DE_PITCH_SOURCE_MASK)); /* dpr10 */
+ (s_pitch / bpp & DE_PITCH_SOURCE_MASK)); /* dpr10 */
/*
* Screen Window width in Pixels.
@@ -259,9 +259,9 @@ int sm750_hw_copyarea(struct lynx_accel *accel,
* for a given point.
*/
write_dpr(accel, DE_WINDOW_WIDTH,
- ((dPitch / Bpp << DE_WINDOW_WIDTH_DST_SHIFT) &
+ ((d_pitch / bpp << DE_WINDOW_WIDTH_DST_SHIFT) &
DE_WINDOW_WIDTH_DST_MASK) |
- (sPitch / Bpp & DE_WINDOW_WIDTH_SRC_MASK)); /* dpr3c */
+ (s_pitch / bpp & DE_WINDOW_WIDTH_SRC_MASK)); /* dpr3c */
if (accel->de_wait() != 0)
return -1;
@@ -277,14 +277,14 @@ int sm750_hw_copyarea(struct lynx_accel *accel,
(height & DE_DIMENSION_Y_ET_MASK)); /* dpr08 */
de_ctrl = (rop2 & DE_CONTROL_ROP_MASK) | DE_CONTROL_ROP_SELECT |
- ((nDirection == RIGHT_TO_LEFT) ? DE_CONTROL_DIRECTION : 0) |
+ ((n_direction == RIGHT_TO_LEFT) ? DE_CONTROL_DIRECTION : 0) |
DE_CONTROL_COMMAND_BITBLT | DE_CONTROL_STATUS;
write_dpr(accel, DE_CONTROL, de_ctrl); /* dpr0c */
return 0;
}
-static unsigned int deGetTransparency(struct lynx_accel *accel)
+static unsigned int de_get_transparency(struct lynx_accel *accel)
{
unsigned int de_ctrl;
@@ -301,11 +301,11 @@ static unsigned int deGetTransparency(struct lynx_accel *accel)
* @pSrcbuf: pointer to start of source buffer in system memory
* @srcDelta: Pitch value (in bytes) of the source buffer, +ive means top down
* and -ive mean button up
- * @startBit: Mono data can start at any bit in a byte, this value should be
+ * @start_bit: Mono data can start at any bit in a byte, this value should be
* 0 to 7
- * @dBase: Address of destination: offset in frame buffer
- * @dPitch: Pitch value of destination surface in BYTE
- * @bytePerPixel: Color depth of destination surface
+ * @d_base: Address of destination: offset in frame buffer
+ * @d_pitch: Pitch value of destination surface in BYTE
+ * @byte_per_pixel: Color depth of destination surface
* @dx: Starting x coordinate of destination surface
* @dy: Starting y coordinate of destination surface
* @width: width of rectangle in pixel value
@@ -314,22 +314,22 @@ static unsigned int deGetTransparency(struct lynx_accel *accel)
* @bColor: Background color (corresponding to a 0 in the monochrome data
* @rop2: ROP value
*/
-int sm750_hw_imageblit(struct lynx_accel *accel, const char *pSrcbuf,
- u32 srcDelta, u32 startBit, u32 dBase, u32 dPitch,
- u32 bytePerPixel, u32 dx, u32 dy, u32 width,
- u32 height, u32 fColor, u32 bColor, u32 rop2)
+int sm750_hw_imageblit(struct lynx_accel *accel, const char *p_srcbuf,
+ u32 src_delta, u32 start_bit, u32 d_base, u32 d_pitch,
+ u32 byte_per_pixel, u32 dx, u32 dy, u32 width,
+ u32 height, u32 f_color, u32 b_color, u32 rop2)
{
- unsigned int ulBytesPerScan;
- unsigned int ul4BytesPerScan;
- unsigned int ulBytesRemain;
+ unsigned int ul_bytes_per_scan;
+ unsigned int ul_4bytes_per_scan;
+ unsigned int ul_bytes_remain;
unsigned int de_ctrl = 0;
- unsigned char ajRemain[4];
+ unsigned char aj_remain[4];
int i, j;
- startBit &= 7; /* Just make sure the start bit is within legal range */
- ulBytesPerScan = (width + startBit + 7) / 8;
- ul4BytesPerScan = ulBytesPerScan & ~3;
- ulBytesRemain = ulBytesPerScan & 3;
+ start_bit &= 7; /* Just make sure the start bit is within legal range */
+ ul_bytes_per_scan = (width + start_bit + 7) / 8;
+ ul_4bytes_per_scan = ul_bytes_per_scan & ~3;
+ ul_bytes_remain = ul_bytes_per_scan & 3;
if (accel->de_wait() != 0)
return -1;
@@ -344,7 +344,7 @@ int sm750_hw_imageblit(struct lynx_accel *accel, const char *pSrcbuf,
* It is an address offset (128 bit aligned)
* from the beginning of frame buffer.
*/
- write_dpr(accel, DE_WINDOW_DESTINATION_BASE, dBase);
+ write_dpr(accel, DE_WINDOW_DESTINATION_BASE, d_base);
/*
* Program pitch (distance between the 1st points of two adjacent
@@ -352,9 +352,9 @@ int sm750_hw_imageblit(struct lynx_accel *accel, const char *pSrcbuf,
* register uses pixel values. Need Byte to pixel conversion.
*/
write_dpr(accel, DE_PITCH,
- ((dPitch / bytePerPixel << DE_PITCH_DESTINATION_SHIFT) &
+ ((d_pitch / byte_per_pixel << DE_PITCH_DESTINATION_SHIFT) &
DE_PITCH_DESTINATION_MASK) |
- (dPitch / bytePerPixel & DE_PITCH_SOURCE_MASK)); /* dpr10 */
+ (d_pitch / byte_per_pixel & DE_PITCH_SOURCE_MASK)); /* dpr10 */
/*
* Screen Window width in Pixels.
@@ -362,17 +362,17 @@ int sm750_hw_imageblit(struct lynx_accel *accel, const char *pSrcbuf,
* in frame buffer for a given point.
*/
write_dpr(accel, DE_WINDOW_WIDTH,
- ((dPitch / bytePerPixel << DE_WINDOW_WIDTH_DST_SHIFT) &
+ ((d_pitch / byte_per_pixel << DE_WINDOW_WIDTH_DST_SHIFT) &
DE_WINDOW_WIDTH_DST_MASK) |
- (dPitch / bytePerPixel & DE_WINDOW_WIDTH_SRC_MASK));
+ (d_pitch / byte_per_pixel & DE_WINDOW_WIDTH_SRC_MASK));
/*
* Note: For 2D Source in Host Write, only X_K1_MONO field is needed,
* and Y_K2 field is not used.
- * For mono bitmap, use startBit for X_K1.
+ * For mono bitmap, use start_bit for X_K1.
*/
write_dpr(accel, DE_SOURCE,
- (startBit << DE_SOURCE_X_K1_SHIFT) &
+ (start_bit << DE_SOURCE_X_K1_SHIFT) &
DE_SOURCE_X_K1_MONO_MASK); /* dpr00 */
write_dpr(accel, DE_DESTINATION,
@@ -383,28 +383,28 @@ int sm750_hw_imageblit(struct lynx_accel *accel, const char *pSrcbuf,
((width << DE_DIMENSION_X_SHIFT) & DE_DIMENSION_X_MASK) |
(height & DE_DIMENSION_Y_ET_MASK)); /* dpr08 */
- write_dpr(accel, DE_FOREGROUND, fColor);
- write_dpr(accel, DE_BACKGROUND, bColor);
+ write_dpr(accel, DE_FOREGROUND, f_color);
+ write_dpr(accel, DE_BACKGROUND, b_color);
de_ctrl = (rop2 & DE_CONTROL_ROP_MASK) |
DE_CONTROL_ROP_SELECT | DE_CONTROL_COMMAND_HOST_WRITE |
DE_CONTROL_HOST | DE_CONTROL_STATUS;
- write_dpr(accel, DE_CONTROL, de_ctrl | deGetTransparency(accel));
+ write_dpr(accel, DE_CONTROL, de_ctrl | de_get_transparency(accel));
/* Write MONO data (line by line) to 2D Engine data port */
for (i = 0; i < height; i++) {
/* For each line, send the data in chunks of 4 bytes */
- for (j = 0; j < (ul4BytesPerScan / 4); j++)
- write_dpPort(accel, *(unsigned int *)(pSrcbuf + (j * 4)));
+ for (j = 0; j < (ul_4bytes_per_scan / 4); j++)
+ write_dp_port(accel, *(unsigned int *)(p_srcbuf + (j * 4)));
- if (ulBytesRemain) {
- memcpy(ajRemain, pSrcbuf + ul4BytesPerScan,
- ulBytesRemain);
- write_dpPort(accel, *(unsigned int *)ajRemain);
+ if (ul_bytes_remain) {
+ memcpy(aj_remain, p_srcbuf + ul_4bytes_per_scan,
+ ul_bytes_remain);
+ write_dp_port(accel, *(unsigned int *)aj_remain);
}
- pSrcbuf += srcDelta;
+ p_srcbuf += src_delta;
}
return 0;
diff --git a/drivers/staging/sm750fb/sm750_accel.h b/drivers/staging/sm750fb/sm750_accel.h
index 2c79cb730a0a..7b92f482ee86 100644
--- a/drivers/staging/sm750fb/sm750_accel.h
+++ b/drivers/staging/sm750fb/sm750_accel.h
@@ -190,7 +190,7 @@ void sm750_hw_set2dformat(struct lynx_accel *accel, int fmt);
void sm750_hw_de_init(struct lynx_accel *accel);
int sm750_hw_fillrect(struct lynx_accel *accel,
- u32 base, u32 pitch, u32 Bpp,
+ u32 base, u32 pitch, u32 bpp,
u32 x, u32 y, u32 width, u32 height,
u32 color, u32 rop);
@@ -210,10 +210,10 @@ int sm750_hw_fillrect(struct lynx_accel *accel,
* @rop2: ROP value
*/
int sm750_hw_copyarea(struct lynx_accel *accel,
- unsigned int sBase, unsigned int sPitch,
+ unsigned int s_base, unsigned int s_pitch,
unsigned int sx, unsigned int sy,
- unsigned int dBase, unsigned int dPitch,
- unsigned int Bpp, unsigned int dx, unsigned int dy,
+ unsigned int d_base, unsigned int d_pitch,
+ unsigned int bpp, unsigned int dx, unsigned int dy,
unsigned int width, unsigned int height,
unsigned int rop2);
@@ -235,9 +235,9 @@ int sm750_hw_copyarea(struct lynx_accel *accel,
* @bColor: Background color (corresponding to a 0 in the monochrome data
* @rop2: ROP value
*/
-int sm750_hw_imageblit(struct lynx_accel *accel, const char *pSrcbuf,
- u32 srcDelta, u32 startBit, u32 dBase, u32 dPitch,
- u32 bytePerPixel, u32 dx, u32 dy, u32 width,
- u32 height, u32 fColor, u32 bColor, u32 rop2);
+int sm750_hw_imageblit(struct lynx_accel *accel, const char *p_srcbuf,
+ u32 src_delta, u32 start_bit, u32 d_base, u32 d_pitch,
+ u32 byte_per_pixel, u32 dx, u32 dy, u32 width,
+ u32 height, u32 f_color, u32 b_color, u32 rop2);
#endif
diff --git a/drivers/staging/sm750fb/sm750_cursor.c b/drivers/staging/sm750fb/sm750_cursor.c
index bbbef27cb329..ff643e33fa44 100644
--- a/drivers/staging/sm750fb/sm750_cursor.c
+++ b/drivers/staging/sm750fb/sm750_cursor.c
@@ -58,13 +58,13 @@ void sm750_hw_cursor_disable(struct lynx_cursor *cursor)
poke32(HWC_ADDRESS, 0);
}
-void sm750_hw_cursor_setSize(struct lynx_cursor *cursor, int w, int h)
+void sm750_hw_cursor_set_size(struct lynx_cursor *cursor, int w, int h)
{
cursor->w = w;
cursor->h = h;
}
-void sm750_hw_cursor_setPos(struct lynx_cursor *cursor, int x, int y)
+void sm750_hw_cursor_set_pos(struct lynx_cursor *cursor, int x, int y)
{
u32 reg;
@@ -73,7 +73,7 @@ void sm750_hw_cursor_setPos(struct lynx_cursor *cursor, int x, int y)
poke32(HWC_LOCATION, reg);
}
-void sm750_hw_cursor_setColor(struct lynx_cursor *cursor, u32 fg, u32 bg)
+void sm750_hw_cursor_set_color(struct lynx_cursor *cursor, u32 fg, u32 bg)
{
u32 reg = (fg << HWC_COLOR_12_2_RGB565_SHIFT) &
HWC_COLOR_12_2_RGB565_MASK;
@@ -82,8 +82,8 @@ void sm750_hw_cursor_setColor(struct lynx_cursor *cursor, u32 fg, u32 bg)
poke32(HWC_COLOR_3, 0xffe0);
}
-void sm750_hw_cursor_setData(struct lynx_cursor *cursor, u16 rop,
- const u8 *pcol, const u8 *pmsk)
+void sm750_hw_cursor_set_data(struct lynx_cursor *cursor, u16 rop,
+ const u8 *pcol, const u8 *pmsk)
{
int i, j, count, pitch, offset;
u8 color, mask, opr;
@@ -97,7 +97,7 @@ void sm750_hw_cursor_setData(struct lynx_cursor *cursor, u16 rop,
count = pitch * cursor->h;
/* in byte */
- offset = cursor->maxW * 2 / 8;
+ offset = cursor->max_w * 2 / 8;
data = 0;
pstart = cursor->vstart;
@@ -132,8 +132,8 @@ void sm750_hw_cursor_setData(struct lynx_cursor *cursor, u16 rop,
}
}
-void sm750_hw_cursor_setData2(struct lynx_cursor *cursor, u16 rop,
- const u8 *pcol, const u8 *pmsk)
+void sm750_hw_cursor_set_data2(struct lynx_cursor *cursor, u16 rop,
+ const u8 *pcol, const u8 *pmsk)
{
int i, j, count, pitch, offset;
u8 color, mask;
@@ -147,7 +147,7 @@ void sm750_hw_cursor_setData2(struct lynx_cursor *cursor, u16 rop,
count = pitch * cursor->h;
/* in byte */
- offset = cursor->maxW * 2 / 8;
+ offset = cursor->max_w * 2 / 8;
data = 0;
pstart = cursor->vstart;
diff --git a/drivers/staging/sm750fb/sm750_cursor.h b/drivers/staging/sm750fb/sm750_cursor.h
index b59643dd61ed..88fa02f6377a 100644
--- a/drivers/staging/sm750fb/sm750_cursor.h
+++ b/drivers/staging/sm750fb/sm750_cursor.h
@@ -5,11 +5,11 @@
/* hw_cursor_xxx works for voyager,718 and 750 */
void sm750_hw_cursor_enable(struct lynx_cursor *cursor);
void sm750_hw_cursor_disable(struct lynx_cursor *cursor);
-void sm750_hw_cursor_setSize(struct lynx_cursor *cursor, int w, int h);
-void sm750_hw_cursor_setPos(struct lynx_cursor *cursor, int x, int y);
-void sm750_hw_cursor_setColor(struct lynx_cursor *cursor, u32 fg, u32 bg);
-void sm750_hw_cursor_setData(struct lynx_cursor *cursor, u16 rop,
- const u8 *data, const u8 *mask);
-void sm750_hw_cursor_setData2(struct lynx_cursor *cursor, u16 rop,
+void sm750_hw_cursor_set_size(struct lynx_cursor *cursor, int w, int h);
+void sm750_hw_cursor_set_pos(struct lynx_cursor *cursor, int x, int y);
+void sm750_hw_cursor_set_color(struct lynx_cursor *cursor, u32 fg, u32 bg);
+void sm750_hw_cursor_set_data(struct lynx_cursor *cursor, u16 rop,
const u8 *data, const u8 *mask);
+void sm750_hw_cursor_set_data2(struct lynx_cursor *cursor, u16 rop,
+ const u8 *data, const u8 *mask);
#endif
diff --git a/drivers/staging/sm750fb/sm750_hw.c b/drivers/staging/sm750fb/sm750_hw.c
index ea1d3d4efbc2..a57e00b5071e 100644
--- a/drivers/staging/sm750fb/sm750_hw.c
+++ b/drivers/staging/sm750fb/sm750_hw.c
@@ -50,20 +50,20 @@ int hw_sm750_map(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
}
/* now map mmio and vidmem */
- sm750_dev->pvReg = ioremap_nocache(sm750_dev->vidreg_start,
- sm750_dev->vidreg_size);
- if (!sm750_dev->pvReg) {
+ sm750_dev->pv_reg = ioremap_nocache(sm750_dev->vidreg_start,
+ sm750_dev->vidreg_size);
+ if (!sm750_dev->pv_reg) {
pr_err("mmio failed\n");
ret = -EFAULT;
goto exit;
} else {
- pr_info("mmio virtual addr = %p\n", sm750_dev->pvReg);
+ pr_info("mmio virtual addr = %p\n", sm750_dev->pv_reg);
}
- sm750_dev->accel.dprBase = sm750_dev->pvReg + DE_BASE_ADDR_TYPE1;
- sm750_dev->accel.dpPortBase = sm750_dev->pvReg + DE_PORT_ADDR_TYPE1;
+ sm750_dev->accel.dpr_base = sm750_dev->pv_reg + DE_BASE_ADDR_TYPE1;
+ sm750_dev->accel.dp_port_base = sm750_dev->pv_reg + DE_PORT_ADDR_TYPE1;
- mmio750 = sm750_dev->pvReg;
+ mmio750 = sm750_dev->pv_reg;
sm750_set_chip_type(sm750_dev->devid, sm750_dev->revid);
sm750_dev->vidmem_start = pci_resource_start(pdev, 0);
@@ -78,14 +78,14 @@ int hw_sm750_map(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
sm750_dev->vidmem_start, sm750_dev->vidmem_size);
/* reserve the vidmem space of smi adaptor */
- sm750_dev->pvMem = ioremap_wc(sm750_dev->vidmem_start,
- sm750_dev->vidmem_size);
- if (!sm750_dev->pvMem) {
+ sm750_dev->pv_mem = ioremap_wc(sm750_dev->vidmem_start,
+ sm750_dev->vidmem_size);
+ if (!sm750_dev->pv_mem) {
pr_err("Map video memory failed\n");
ret = -EFAULT;
goto exit;
} else {
- pr_info("video memory vaddr = %p\n", sm750_dev->pvMem);
+ pr_info("video memory vaddr = %p\n", sm750_dev->pv_mem);
}
exit:
return ret;
@@ -95,7 +95,7 @@ int hw_sm750_inithw(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
{
struct init_status *parm;
- parm = &sm750_dev->initParm;
+ parm = &sm750_dev->init_parm;
if (parm->chip_clk == 0)
parm->chip_clk = (sm750_get_chip_type() == SM750LE) ?
DEFAULT_SM750LE_CHIP_CLOCK :
@@ -106,7 +106,7 @@ int hw_sm750_inithw(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
if (parm->master_clk == 0)
parm->master_clk = parm->chip_clk / 3;
- ddk750_init_hw((struct initchip_param *)&sm750_dev->initParm);
+ ddk750_init_hw((struct initchip_param *)&sm750_dev->init_parm);
/* for sm718, open pci burst */
if (sm750_dev->devid == 0x718) {
poke32(SYSTEM_CTRL,
@@ -136,12 +136,12 @@ int hw_sm750_inithw(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
~(PANEL_DISPLAY_CTRL_DUAL_DISPLAY |
PANEL_DISPLAY_CTRL_DOUBLE_PIXEL);
switch (sm750_dev->pnltype) {
- case sm750_24TFT:
+ case sm750_24_tft:
break;
- case sm750_doubleTFT:
+ case sm750_double_tft:
val |= PANEL_DISPLAY_CTRL_DOUBLE_PIXEL;
break;
- case sm750_dualTFT:
+ case sm750_dual_tft:
val |= PANEL_DISPLAY_CTRL_DUAL_DISPLAY;
break;
}
@@ -175,14 +175,14 @@ int hw_sm750_inithw(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
/* init 2d engine */
if (!sm750_dev->accel_off)
- hw_sm750_initAccel(sm750_dev);
+ hw_sm750_init_accel(sm750_dev);
return 0;
}
-int hw_sm750_output_setMode(struct lynxfb_output *output,
- struct fb_var_screeninfo *var,
- struct fb_fix_screeninfo *fix)
+int hw_sm750_output_set_mode(struct lynxfb_output *output,
+ struct fb_var_screeninfo *var,
+ struct fb_fix_screeninfo *fix)
{
int ret;
enum disp_output disp_set;
@@ -221,8 +221,8 @@ int hw_sm750_output_setMode(struct lynxfb_output *output,
return ret;
}
-int hw_sm750_crtc_checkMode(struct lynxfb_crtc *crtc,
- struct fb_var_screeninfo *var)
+int hw_sm750_crtc_check_mode(struct lynxfb_crtc *crtc,
+ struct fb_var_screeninfo *var)
{
struct sm750_dev *sm750_dev;
struct lynxfb_par *par = container_of(crtc, struct lynxfb_par, crtc);
@@ -247,9 +247,9 @@ int hw_sm750_crtc_checkMode(struct lynxfb_crtc *crtc,
}
/* set the controller's mode for @crtc charged with @var and @fix parameters */
-int hw_sm750_crtc_setMode(struct lynxfb_crtc *crtc,
- struct fb_var_screeninfo *var,
- struct fb_fix_screeninfo *fix)
+int hw_sm750_crtc_set_mode(struct lynxfb_crtc *crtc,
+ struct fb_var_screeninfo *var,
+ struct fb_fix_screeninfo *fix)
{
int ret, fmt;
u32 reg;
@@ -305,7 +305,7 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc *crtc,
clock = SECONDARY_PLL;
pr_debug("Request pixel clock = %lu\n", modparm.pixel_clock);
- ret = ddk750_setModeTiming(&modparm, clock);
+ ret = ddk750_set_mode_timing(&modparm, clock);
if (ret) {
pr_err("Set mode timing failed\n");
goto exit;
@@ -314,7 +314,7 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc *crtc,
if (crtc->channel != sm750_secondary) {
/* set pitch, offset, width, start address, etc... */
poke32(PANEL_FB_ADDRESS,
- crtc->oScreen & PANEL_FB_ADDRESS_ADDRESS_MASK);
+ crtc->o_screen & PANEL_FB_ADDRESS_ADDRESS_MASK);
reg = var->xres * (var->bits_per_pixel >> 3);
/*
@@ -350,7 +350,7 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc *crtc,
poke32(PANEL_DISPLAY_CTRL, reg | (var->bits_per_pixel >> 4));
} else {
/* not implemented now */
- poke32(CRT_FB_ADDRESS, crtc->oScreen);
+ poke32(CRT_FB_ADDRESS, crtc->o_screen);
reg = var->xres * (var->bits_per_pixel >> 3);
/*
* crtc->channel is not equal to par->index on numeric,
@@ -372,8 +372,8 @@ int hw_sm750_crtc_setMode(struct lynxfb_crtc *crtc,
return ret;
}
-int hw_sm750_setColReg(struct lynxfb_crtc *crtc, ushort index,
- ushort red, ushort green, ushort blue)
+int hw_sm750_set_col_reg(struct lynxfb_crtc *crtc, ushort index,
+ ushort red, ushort green, ushort blue)
{
static unsigned int add[] = {PANEL_PALETTE_RAM, CRT_PALETTE_RAM};
@@ -382,7 +382,7 @@ int hw_sm750_setColReg(struct lynxfb_crtc *crtc, ushort index,
return 0;
}
-int hw_sm750le_setBLANK(struct lynxfb_output *output, int blank)
+int hw_sm750le_set_blank(struct lynxfb_output *output, int blank)
{
int dpms, crtdb;
@@ -423,7 +423,7 @@ int hw_sm750le_setBLANK(struct lynxfb_output *output, int blank)
return 0;
}
-int hw_sm750_setBLANK(struct lynxfb_output *output, int blank)
+int hw_sm750_set_blank(struct lynxfb_output *output, int blank)
{
unsigned int dpms, pps, crtdb;
@@ -476,7 +476,7 @@ int hw_sm750_setBLANK(struct lynxfb_output *output, int blank)
return 0;
}
-void hw_sm750_initAccel(struct sm750_dev *sm750_dev)
+void hw_sm750_init_accel(struct sm750_dev *sm750_dev)
{
u32 reg;
@@ -506,7 +506,7 @@ void hw_sm750_initAccel(struct sm750_dev *sm750_dev)
sm750_dev->accel.de_init(&sm750_dev->accel);
}
-int hw_sm750le_deWait(void)
+int hw_sm750le_de_wait(void)
{
int i = 0x10000000;
unsigned int mask = DE_STATE2_DE_STATUS_BUSY | DE_STATE2_DE_FIFO_EMPTY |
@@ -523,7 +523,7 @@ int hw_sm750le_deWait(void)
return -1;
}
-int hw_sm750_deWait(void)
+int hw_sm750_de_wait(void)
{
int i = 0x10000000;
unsigned int mask = SYSTEM_CTRL_DE_STATUS_BUSY |
@@ -554,7 +554,7 @@ int hw_sm750_pan_display(struct lynxfb_crtc *crtc,
total = var->yoffset * info->fix.line_length +
((var->xoffset * var->bits_per_pixel) >> 3);
- total += crtc->oScreen;
+ total += crtc->o_screen;
if (crtc->channel == sm750_primary) {
poke32(PANEL_FB_ADDRESS,
peek32(PANEL_FB_ADDRESS) |
--
2.20.1
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 3/3] sm750fb: Fix Overlong Line Issues
2019-12-08 13:28 [PATCH 1/3] sm750fb: Fix Avoid CamelCase Sven Leykauf
2019-12-08 13:28 ` [PATCH 2/3] " Sven Leykauf
@ 2019-12-08 13:29 ` Sven Leykauf
2019-12-10 14:09 ` [PATCH 1/3] sm750fb: Fix Avoid CamelCase Dan Carpenter
2 siblings, 0 replies; 5+ messages in thread
From: Sven Leykauf @ 2019-12-08 13:29 UTC (permalink / raw)
To: devel; +Cc: Daniel Bauer, Sven Leykauf, linux-kernel
Fix issues of newly introduced overlong lines, due to name enlargement
within the former two patches.
Co-developed-by: Daniel Bauer <daniel.j.bauer@fau.de>
Signed-off-by: Daniel Bauer <daniel.j.bauer@fau.de>
Signed-off-by: Sven Leykauf <sven_leykauf1@web.de>
---
drivers/staging/sm750fb/ddk750_dvi.c | 24 ++++++++++++------------
drivers/staging/sm750fb/ddk750_sii164.c | 3 ++-
drivers/staging/sm750fb/sm750_accel.c | 8 +++++---
3 files changed, 19 insertions(+), 16 deletions(-)
diff --git a/drivers/staging/sm750fb/ddk750_dvi.c b/drivers/staging/sm750fb/ddk750_dvi.c
index 930f56d91474..1536e252e37c 100644
--- a/drivers/staging/sm750fb/ddk750_dvi.c
+++ b/drivers/staging/sm750fb/ddk750_dvi.c
@@ -13,20 +13,20 @@
*/
static struct dvi_ctrl_device g_dcft_supported_dvi_controller[] = {
#ifdef DVI_CTRL_SII164
- {
- .pfn_init = sii164_init_chip,
- .pfn_get_vendor_id = sii164_get_vendor_id,
- .pfn_get_device_id = sii164_get_device_id,
+{
+ .pfn_init = sii164_init_chip,
+ .pfn_get_vendor_id = sii164_get_vendor_id,
+ .pfn_get_device_id = sii164_get_device_id,
#ifdef SII164_FULL_FUNCTIONS
- .pfn_reset_chip = sii164_reset_chip,
- .pfn_get_chip_string = sii164_get_chip_string,
- .pfn_set_power = sii164_set_power,
- .pfn_enable_hot_plug_detection = sii164_enable_hot_plug_detection,
- .pfn_is_connected = sii164_is_connected,
- .pfn_check_interrupt = sii164_check_interrupt,
- .pfn_clear_interrupt = sii164_clear_interrupt,
+ .pfn_reset_chip = sii164_reset_chip,
+ .pfn_get_chip_string = sii164_get_chip_string,
+ .pfn_set_power = sii164_set_power,
+ .pfn_enable_hot_plug_detection = sii164_enable_hot_plug_detection,
+ .pfn_is_connected = sii164_is_connected,
+ .pfn_check_interrupt = sii164_check_interrupt,
+ .pfn_clear_interrupt = sii164_clear_interrupt,
#endif
- },
+},
#endif
};
diff --git a/drivers/staging/sm750fb/ddk750_sii164.c b/drivers/staging/sm750fb/ddk750_sii164.c
index 781eceb2f402..47895df1173e 100644
--- a/drivers/staging/sm750fb/ddk750_sii164.c
+++ b/drivers/staging/sm750fb/ddk750_sii164.c
@@ -301,7 +301,8 @@ void sii164_set_power(unsigned char power_up)
* sii164_select_hot_plug_detection_mode
* This function selects the mode of the hot plug detection.
*/
-static void sii164_select_hot_plug_detection_mode(enum sii164_hot_plug_mode hot_plug_mode)
+static void sii164_select_hot_plug_detection_mode(enum sii164_hot_plug_mode
+ hot_plug_mode)
{
unsigned char detect_reg;
diff --git a/drivers/staging/sm750fb/sm750_accel.c b/drivers/staging/sm750fb/sm750_accel.c
index d1f940120721..86605df163f0 100644
--- a/drivers/staging/sm750fb/sm750_accel.c
+++ b/drivers/staging/sm750fb/sm750_accel.c
@@ -18,7 +18,8 @@
#include "sm750.h"
#include "sm750_accel.h"
-static inline void write_dpr(struct lynx_accel *accel, int offset, u32 reg_value)
+static inline void write_dpr(struct lynx_accel *accel,
+ int offset, u32 reg_value)
{
writel(reg_value, accel->dpr_base + offset);
}
@@ -354,7 +355,7 @@ int sm750_hw_imageblit(struct lynx_accel *accel, const char *p_srcbuf,
write_dpr(accel, DE_PITCH,
((d_pitch / byte_per_pixel << DE_PITCH_DESTINATION_SHIFT) &
DE_PITCH_DESTINATION_MASK) |
- (d_pitch / byte_per_pixel & DE_PITCH_SOURCE_MASK)); /* dpr10 */
+ (d_pitch / byte_per_pixel & DE_PITCH_SOURCE_MASK));/* dpr10 */
/*
* Screen Window width in Pixels.
@@ -396,7 +397,8 @@ int sm750_hw_imageblit(struct lynx_accel *accel, const char *p_srcbuf,
for (i = 0; i < height; i++) {
/* For each line, send the data in chunks of 4 bytes */
for (j = 0; j < (ul_4bytes_per_scan / 4); j++)
- write_dp_port(accel, *(unsigned int *)(p_srcbuf + (j * 4)));
+ write_dp_port(accel,
+ *(unsigned int *)(p_srcbuf + (j * 4)));
if (ul_bytes_remain) {
memcpy(aj_remain, p_srcbuf + ul_4bytes_per_scan,
--
2.20.1
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 1/3] sm750fb: Fix Avoid CamelCase
2019-12-08 13:28 [PATCH 1/3] sm750fb: Fix Avoid CamelCase Sven Leykauf
2019-12-08 13:28 ` [PATCH 2/3] " Sven Leykauf
2019-12-08 13:29 ` [PATCH 3/3] sm750fb: Fix Overlong Line Issues Sven Leykauf
@ 2019-12-10 14:09 ` Dan Carpenter
2 siblings, 0 replies; 5+ messages in thread
From: Dan Carpenter @ 2019-12-10 14:09 UTC (permalink / raw)
To: Sven Leykauf; +Cc: devel, Daniel Bauer, linux-kernel
On Sun, Dec 08, 2019 at 02:28:53PM +0100, Sven Leykauf wrote:
> /*
> - * sii164GetDeviceID
> + * sii164_get_gevice_id
"device" instead of "gevice".
regards,
dan capenter
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 2/3] staging: sm750fb: Fix Avoid CamelCase
2019-12-08 13:28 ` [PATCH 2/3] " Sven Leykauf
@ 2019-12-10 15:05 ` Greg KH
0 siblings, 0 replies; 5+ messages in thread
From: Greg KH @ 2019-12-10 15:05 UTC (permalink / raw)
To: Sven Leykauf; +Cc: devel, Daniel Bauer, linux-kernel
On Sun, Dec 08, 2019 at 02:28:59PM +0100, Sven Leykauf wrote:
> Change names of variables and functions into proper names,
> according to coding style.
Do one thing at a time here. Like just the functions in a single file.
Or a single structure's fields. As it is, this is impossible to review
and I think you got things a bit "odd" in places for some of these
renames but it's hard to tease out from the large patch.
Please break this up into smaller pieces and resend.
thanks,
greg k-h
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2019-12-10 15:05 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-12-08 13:28 [PATCH 1/3] sm750fb: Fix Avoid CamelCase Sven Leykauf
2019-12-08 13:28 ` [PATCH 2/3] " Sven Leykauf
2019-12-10 15:05 ` [PATCH 2/3] staging: " Greg KH
2019-12-08 13:29 ` [PATCH 3/3] sm750fb: Fix Overlong Line Issues Sven Leykauf
2019-12-10 14:09 ` [PATCH 1/3] sm750fb: Fix Avoid CamelCase Dan Carpenter
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.