From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Rakesh Pillai <pillair@codeaurora.org>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH] arm64: dts: qcom: sc7180: Make MSA memory fixed for wifi
Date: Tue, 10 Dec 2019 23:53:01 -0800 [thread overview]
Message-ID: <20191211075301.GI3143381@builder> (raw)
In-Reply-To: <0101016ed035d185-20f04863-0f38-41b7-b88d-76bc36e4dcf9-000000@us-west-2.amazonses.com>
On Wed 04 Dec 01:20 PST 2019, Rakesh Pillai wrote:
> The MSA memory is at a fixed offset, which will be
> a part of reserved memory. Add this flag to indicate
> that wifi in sc7180 will use a fixed memory for MSA.
>
> Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
> ---
> This patchet is dependent on the below changes
> arm64: dts: qcom: sc7180: Add WCN3990 WLAN module device node (https://lore.kernel.org/patchwork/patch/1162434/)
As mentioned for that patch, squash this change into that patch please.
Regards,
Bjorn
> dt: bindings: add dt entry flag to skip SCM call for msa region (https://patchwork.ozlabs.org/patch/1192725/)
> ---
> arch/arm64/boot/dts/qcom/sc7180-idp.dts | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> index 8a6a760..b2ca143f 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> @@ -250,6 +250,7 @@
>
> &wifi {
> status = "okay";
> + qcom,msa_fixed_perm;
> };
>
> /* PINCTRL - additions to nodes defined in sc7180.dtsi */
> --
> 2.7.4
>
WARNING: multiple messages have this Message-ID (diff)
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Rakesh Pillai <pillair@codeaurora.org>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-arm-msm@vger.kernel.org
Subject: Re: [PATCH] arm64: dts: qcom: sc7180: Make MSA memory fixed for wifi
Date: Tue, 10 Dec 2019 23:53:01 -0800 [thread overview]
Message-ID: <20191211075301.GI3143381@builder> (raw)
In-Reply-To: <0101016ed035d185-20f04863-0f38-41b7-b88d-76bc36e4dcf9-000000@us-west-2.amazonses.com>
On Wed 04 Dec 01:20 PST 2019, Rakesh Pillai wrote:
> The MSA memory is at a fixed offset, which will be
> a part of reserved memory. Add this flag to indicate
> that wifi in sc7180 will use a fixed memory for MSA.
>
> Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
> ---
> This patchet is dependent on the below changes
> arm64: dts: qcom: sc7180: Add WCN3990 WLAN module device node (https://lore.kernel.org/patchwork/patch/1162434/)
As mentioned for that patch, squash this change into that patch please.
Regards,
Bjorn
> dt: bindings: add dt entry flag to skip SCM call for msa region (https://patchwork.ozlabs.org/patch/1192725/)
> ---
> arch/arm64/boot/dts/qcom/sc7180-idp.dts | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> index 8a6a760..b2ca143f 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> @@ -250,6 +250,7 @@
>
> &wifi {
> status = "okay";
> + qcom,msa_fixed_perm;
> };
>
> /* PINCTRL - additions to nodes defined in sc7180.dtsi */
> --
> 2.7.4
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-12-11 7:53 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-04 9:20 [PATCH] arm64: dts: qcom: sc7180: Make MSA memory fixed for wifi Rakesh Pillai
2019-12-05 0:56 ` Matthias Kaehlcke
2019-12-05 0:56 ` Matthias Kaehlcke
2019-12-11 7:53 ` Bjorn Andersson [this message]
2019-12-11 7:53 ` Bjorn Andersson
2019-12-19 7:46 ` pillair
2019-12-19 7:46 ` pillair
-- strict thread matches above, loose matches on Subject: below --
2019-12-04 9:20 Rakesh Pillai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191211075301.GI3143381@builder \
--to=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pillair@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.