From: Andrey Konovalov <andrey.konovalov@linaro.org>
To: mchehab@kernel.org, robh+dt@kernel.org
Cc: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
dave.stevenson@raspberrypi.com, peter.griffin@linaro.org
Subject: [PATCH 0/2] Add IMX219 CMOS image sensor support
Date: Wed, 11 Dec 2019 14:54:39 +0300 [thread overview]
Message-ID: <20191211115441.10637-1-andrey.konovalov@linaro.org> (raw)
This patchset adds support for IMX290 CMOS image sensor from Sony.
Sony IMX219 is an 8MPix, 1/4.0-inch CMOS active pixel digital image sensor
with an active array size of 3280H x 2464V. It is programmable through
I2C interface. Image data are sent through MIPI CSI-2, which can be configured
as either 2 or 4 data lanes, but this driver currently only supports 2 lanes.
The currently supported resolutions are 3280x2464 @ 15fps, 1920x1080 @ 30fps
(cropped FOV), and 1640x1232 (2x2 binned) @ 30fps.
The driver has been tested with Raspberry Pi Camera Module v2 connected to
Raspberry Pi Zero W.
Thanks,
Andrey
Andrey Konovalov (1):
dt-bindings: media: i2c: Add IMX219 CMOS sensor binding
Dave Stevenson (1):
media: i2c: Add driver for Sony IMX219 sensor
.../devicetree/bindings/media/i2c/imx219.yaml | 112 ++
MAINTAINERS | 8 +
drivers/media/i2c/Kconfig | 12 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/imx219.c | 1248 ++++++++++++++++++++
5 files changed, 1381 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/imx219.yaml
create mode 100644 drivers/media/i2c/imx219.c
next reply other threads:[~2019-12-11 11:55 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-11 11:54 Andrey Konovalov [this message]
2019-12-11 11:54 ` [PATCH 1/2] dt-bindings: media: i2c: Add IMX219 CMOS sensor binding Andrey Konovalov
2019-12-19 21:00 ` Rob Herring
2019-12-11 11:54 ` [PATCH 2/2] media: i2c: Add driver for Sony IMX219 sensor Andrey Konovalov
2019-12-14 5:52 ` Ezequiel Garcia
2019-12-18 22:29 ` Andrey Konovalov
2019-12-19 15:36 ` Dave Stevenson
2019-12-20 17:15 ` Andrey Konovalov
2019-12-19 15:53 ` Ezequiel Garcia
2019-12-20 17:28 ` Andrey Konovalov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191211115441.10637-1-andrey.konovalov@linaro.org \
--to=andrey.konovalov@linaro.org \
--cc=dave.stevenson@raspberrypi.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=peter.griffin@linaro.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.