All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andrey Konovalov <andrey.konovalov@linaro.org>
To: mchehab@kernel.org, robh+dt@kernel.org
Cc: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
	dave.stevenson@raspberrypi.com, peter.griffin@linaro.org,
	Andrey Konovalov <andrey.konovalov@linaro.org>
Subject: [PATCH 1/2] dt-bindings: media: i2c: Add IMX219 CMOS sensor binding
Date: Wed, 11 Dec 2019 14:54:40 +0300	[thread overview]
Message-ID: <20191211115441.10637-2-andrey.konovalov@linaro.org> (raw)
In-Reply-To: <20191211115441.10637-1-andrey.konovalov@linaro.org>

Add YAML device tree binding for IMX219 CMOS image sensor, and
the relevant MAINTAINERS entries.

Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
---
 .../devicetree/bindings/media/i2c/imx219.yaml | 112 ++++++++++++++++++
 MAINTAINERS                                   |   8 ++
 2 files changed, 120 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/imx219.yaml

diff --git a/Documentation/devicetree/bindings/media/i2c/imx219.yaml b/Documentation/devicetree/bindings/media/i2c/imx219.yaml
new file mode 100644
index 000000000000..5e4293c21933
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/imx219.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/imx219.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony 1/4.0-Inch 8Mpixel CMOS Digital Image Sensor
+
+maintainers:
+  - Dave Stevenson <dave.stevenson@raspberrypi.com>
+
+description: |-
+  The Sony imx219 is a 1/4.0-inch CMOS active pixel digital image sensor
+  with an active array size of 3280H x 2464V. It is programmable through
+  I2C interface. The I2C address is fixed to 0x10 as per sensor data sheet.
+  Image data is sent through MIPI CSI-2, which is configured as either 2 or
+  4 data lanes.
+
+properties:
+  compatible:
+    const: sony,imx219
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: xclk
+
+  VDIG-supply:
+    description:
+      Digital I/O voltage supply, 1.8 volts
+
+  VANA-supply:
+    description:
+      Analog voltage supply, 2.8 volts
+
+  VDDL-supply:
+    description:
+      Digital core voltage supply, 1.2 volts
+
+  xclr-gpios:
+    description: |-
+      Reference to the GPIO connected to the xclr pin, if any.
+      Must be released after all supplies are applied.
+      This is an active high signal to the imx219.
+
+  clock-noncontinuous:
+    description: |-
+      Presence of this boolean property decides whether the MIPI CSI-2 clock
+      is continuous or non-continuous.
+
+  camera-clk: true
+
+  port: true
+
+  data-lanes:
+    description: |-
+      Should be <1 2 3 4> for four-lane operation, or <1 2> for two-lane
+      operation.
+    const: <1 2>
+  clock-lanes:
+    const: <0>
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - VANA-supply
+  - VDIG-supply
+  - VDDL-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        imx219: sensor@10 {
+            compatible = "sony,imx219";
+            reg = <0x10>;
+            clocks = <&imx219_clk>;
+            clock-names = "xclk";
+            VANA-supply = <&imx219_vana>;   /* 2.8v */
+            VDIG-supply = <&imx219_vdig>;   /* 1.8v */
+            VDDL-supply = <&imx219_vddl>;   /* 1.2v */
+
+            imx219_clk: camera-clk {
+                compatible = "fixed-clock";
+                #clock-cells = <0>;
+                clock-frequency = <24000000>;
+            };
+
+            port {
+                imx219_0: endpoint {
+                    remote-endpoint = <&csi1_ep>;
+                    clock-lanes = <0>;
+                    data-lanes = <1 2>;
+                    clock-noncontinuous;
+                    bus-type = <4>;
+                };
+            };
+        };
+    };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 02d5278a4c9a..3baf2954d2f4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15339,6 +15339,14 @@ S:	Maintained
 F:	drivers/media/i2c/imx214.c
 F:	Documentation/devicetree/bindings/media/i2c/sony,imx214.txt
 
+SONY IMX219 SENSOR DRIVER
+M:	Dave Stevenson <dave.stevenson@raspberrypi.com>
+L:	linux-media@vger.kernel.org
+T:	git git://linuxtv.org/media_tree.git
+S:	Maintained
+F:	drivers/media/i2c/imx219.c
+F:	Documentation/devicetree/bindings/media/i2c/imx219.yaml
+
 SONY IMX258 SENSOR DRIVER
 M:	Sakari Ailus <sakari.ailus@linux.intel.com>
 L:	linux-media@vger.kernel.org
-- 
2.17.1


  reply	other threads:[~2019-12-11 11:55 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-11 11:54 [PATCH 0/2] Add IMX219 CMOS image sensor support Andrey Konovalov
2019-12-11 11:54 ` Andrey Konovalov [this message]
2019-12-19 21:00   ` [PATCH 1/2] dt-bindings: media: i2c: Add IMX219 CMOS sensor binding Rob Herring
2019-12-11 11:54 ` [PATCH 2/2] media: i2c: Add driver for Sony IMX219 sensor Andrey Konovalov
2019-12-14  5:52   ` Ezequiel Garcia
2019-12-18 22:29     ` Andrey Konovalov
2019-12-19 15:36       ` Dave Stevenson
2019-12-20 17:15         ` Andrey Konovalov
2019-12-19 15:53       ` Ezequiel Garcia
2019-12-20 17:28         ` Andrey Konovalov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191211115441.10637-2-andrey.konovalov@linaro.org \
    --to=andrey.konovalov@linaro.org \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=peter.griffin@linaro.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.