From: Benoit Parrot <bparrot@ti.com> To: Tony Lindgren <tony@atomide.com>, Tero Kristo <t-kristo@ti.com>, <linux-omap@vger.kernel.org>, <linux-clk@vger.kernel.org> Cc: Rob Herring <robh+dt@kernel.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, Benoit Parrot <bparrot@ti.com> Subject: [Patch v5 2/3] ARM: dts: dra7: add vpe clkctrl node Date: Wed, 11 Dec 2019 08:08:09 -0600 [thread overview] Message-ID: <20191211140810.10657-3-bparrot@ti.com> (raw) In-Reply-To: <20191211140810.10657-1-bparrot@ti.com> Add clkctrl nodes for VPE module. Note that because of the current dts node name dependency for mapping to clock domain, we must still use "vpe-clkctrl@" naming instead of generic "clock@" naming for the node. And because of this, it's probably best to apply the dts node addition together along with the other clock changes. Signed-off-by: Benoit Parrot <bparrot@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> --- arch/arm/boot/dts/dra7xx-clocks.dtsi | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index 93e1eb83bed9..d1c2406ec71c 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -1591,10 +1591,10 @@ rtc_cm: rtc-cm@700 { compatible = "ti,omap4-cm"; - reg = <0x700 0x100>; + reg = <0x700 0x60>; #address-cells = <1>; #size-cells = <1>; - ranges = <0 0x700 0x100>; + ranges = <0 0x700 0x60>; rtc_clkctrl: rtc-clkctrl@20 { compatible = "ti,clkctrl"; @@ -1603,6 +1603,20 @@ }; }; + vpe_cm: vpe-cm@760 { + compatible = "ti,omap4-cm"; + reg = <0x760 0xc>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x760 0xc>; + + vpe_clkctrl: vpe-clkctrl@0 { + compatible = "ti,clkctrl"; + reg = <0x0 0xc>; + #clock-cells = <2>; + }; + }; + }; &cm_core { -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Benoit Parrot <bparrot@ti.com> To: Tony Lindgren <tony@atomide.com>, Tero Kristo <t-kristo@ti.com>, linux-omap@vger.kernel.org, linux-clk@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Benoit Parrot <bparrot@ti.com> Subject: [Patch v5 2/3] ARM: dts: dra7: add vpe clkctrl node Date: Wed, 11 Dec 2019 08:08:09 -0600 [thread overview] Message-ID: <20191211140810.10657-3-bparrot@ti.com> (raw) In-Reply-To: <20191211140810.10657-1-bparrot@ti.com> Add clkctrl nodes for VPE module. Note that because of the current dts node name dependency for mapping to clock domain, we must still use "vpe-clkctrl@" naming instead of generic "clock@" naming for the node. And because of this, it's probably best to apply the dts node addition together along with the other clock changes. Signed-off-by: Benoit Parrot <bparrot@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> --- arch/arm/boot/dts/dra7xx-clocks.dtsi | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index 93e1eb83bed9..d1c2406ec71c 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -1591,10 +1591,10 @@ rtc_cm: rtc-cm@700 { compatible = "ti,omap4-cm"; - reg = <0x700 0x100>; + reg = <0x700 0x60>; #address-cells = <1>; #size-cells = <1>; - ranges = <0 0x700 0x100>; + ranges = <0 0x700 0x60>; rtc_clkctrl: rtc-clkctrl@20 { compatible = "ti,clkctrl"; @@ -1603,6 +1603,20 @@ }; }; + vpe_cm: vpe-cm@760 { + compatible = "ti,omap4-cm"; + reg = <0x760 0xc>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x760 0xc>; + + vpe_clkctrl: vpe-clkctrl@0 { + compatible = "ti,clkctrl"; + reg = <0x0 0xc>; + #clock-cells = <2>; + }; + }; + }; &cm_core { -- 2.17.1
next prev parent reply other threads:[~2019-12-11 14:04 UTC|newest] Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-12-11 14:08 [Patch v5 0/3] ARM: dts: dra7: add vpe nodes Benoit Parrot 2019-12-11 14:08 ` Benoit Parrot 2019-12-11 14:08 ` [Patch v5 1/3] clk: ti: dra7: add vpe clkctrl data Benoit Parrot 2019-12-11 14:08 ` Benoit Parrot 2019-12-30 19:58 ` Stephen Boyd 2019-12-30 19:58 ` Stephen Boyd 2020-01-21 7:32 ` Tero Kristo 2020-01-21 7:32 ` Tero Kristo 2020-01-23 17:22 ` Tony Lindgren 2019-12-11 14:08 ` Benoit Parrot [this message] 2019-12-11 14:08 ` [Patch v5 2/3] ARM: dts: dra7: add vpe clkctrl node Benoit Parrot 2019-12-11 14:08 ` [Patch v5 3/3] ARM: dts: dra7: Add ti-sysc node for VPE Benoit Parrot 2019-12-11 14:08 ` Benoit Parrot
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20191211140810.10657-3-bparrot@ti.com \ --to=bparrot@ti.com \ --cc=devicetree@vger.kernel.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=t-kristo@ti.com \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.