[PATCH AUTOSEL 5.4 001/350] drm/vc4/vc4_hdmi: fill in connector info

[PATCH AUTOSEL 5.4 001/350] drm/vc4/vc4_hdmi: fill in connector info

[Sasha Levin]

From: Dariusz Marcinkiewicz <darekm@google.com>

[ Upstream commit 66c2dee4ae10a2d841c40b9dd9c7141eb23eee76 ]

Fill in the connector info, allowing userspace to associate
the CEC device with the drm connector.

Tested on a Raspberry Pi 3B.

Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823112427.42394-2-hverkuil-cisco@xs4all.nl
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index ee7d4e7b0ee33..0853b980bcb31 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1285,6 +1285,9 @@ static const struct cec_adap_ops vc4_hdmi_cec_adap_ops = {
 
 static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
 {
+#ifdef CONFIG_DRM_VC4_HDMI_CEC
+	struct cec_connector_info conn_info;
+#endif
 	struct platform_device *pdev = to_platform_device(dev);
 	struct drm_device *drm = dev_get_drvdata(master);
 	struct vc4_dev *vc4 = drm->dev_private;
@@ -1403,13 +1406,15 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
 #ifdef CONFIG_DRM_VC4_HDMI_CEC
 	hdmi->cec_adap = cec_allocate_adapter(&vc4_hdmi_cec_adap_ops,
 					      vc4, "vc4",
-					      CEC_CAP_TRANSMIT |
-					      CEC_CAP_LOG_ADDRS |
-					      CEC_CAP_PASSTHROUGH |
-					      CEC_CAP_RC, 1);
+					      CEC_CAP_DEFAULTS |
+					      CEC_CAP_CONNECTOR_INFO, 1);
 	ret = PTR_ERR_OR_ZERO(hdmi->cec_adap);
 	if (ret < 0)
 		goto err_destroy_conn;
+
+	cec_fill_conn_info_from_drm(&conn_info, hdmi->connector);
+	cec_s_conn_info(hdmi->cec_adap, &conn_info);
+
 	HDMI_WRITE(VC4_HDMI_CPU_MASK_SET, 0xffffffff);
 	value = HDMI_READ(VC4_HDMI_CEC_CNTRL_1);
 	value &= ~VC4_HDMI_CEC_DIV_CLK_CNT_MASK;
-- 
2.20.1

[PATCH AUTOSEL 5.4 001/350] drm/vc4/vc4_hdmi: fill in connector info

[Sasha Levin]

From: Dariusz Marcinkiewicz <darekm@google.com>

[ Upstream commit 66c2dee4ae10a2d841c40b9dd9c7141eb23eee76 ]

Fill in the connector info, allowing userspace to associate
the CEC device with the drm connector.

Tested on a Raspberry Pi 3B.

Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823112427.42394-2-hverkuil-cisco@xs4all.nl
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index ee7d4e7b0ee33..0853b980bcb31 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1285,6 +1285,9 @@ static const struct cec_adap_ops vc4_hdmi_cec_adap_ops = {
 
 static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
 {
+#ifdef CONFIG_DRM_VC4_HDMI_CEC
+	struct cec_connector_info conn_info;
+#endif
 	struct platform_device *pdev = to_platform_device(dev);
 	struct drm_device *drm = dev_get_drvdata(master);
 	struct vc4_dev *vc4 = drm->dev_private;
@@ -1403,13 +1406,15 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
 #ifdef CONFIG_DRM_VC4_HDMI_CEC
 	hdmi->cec_adap = cec_allocate_adapter(&vc4_hdmi_cec_adap_ops,
 					      vc4, "vc4",
-					      CEC_CAP_TRANSMIT |
-					      CEC_CAP_LOG_ADDRS |
-					      CEC_CAP_PASSTHROUGH |
-					      CEC_CAP_RC, 1);
+					      CEC_CAP_DEFAULTS |
+					      CEC_CAP_CONNECTOR_INFO, 1);
 	ret = PTR_ERR_OR_ZERO(hdmi->cec_adap);
 	if (ret < 0)
 		goto err_destroy_conn;
+
+	cec_fill_conn_info_from_drm(&conn_info, hdmi->connector);
+	cec_s_conn_info(hdmi->cec_adap, &conn_info);
+
 	HDMI_WRITE(VC4_HDMI_CPU_MASK_SET, 0xffffffff);
 	value = HDMI_READ(VC4_HDMI_CEC_CNTRL_1);
 	value &= ~VC4_HDMI_CEC_DIV_CLK_CNT_MASK;
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.4 002/350] drm/virtio: switch virtio_gpu_wait_ioctl() to gem helper.

[Sasha Levin]

From: Gerd Hoffmann <kraxel@redhat.com>

[ Upstream commit 29cf12394c0565d7eb1685bf0c1b4749aa6a8b66 ]

Use drm_gem_reservation_object_wait() in virtio_gpu_wait_ioctl().
This also makes the ioctl run lockless.

v9: fix return value.
v5: handle lookup failure.
v2: use reservation_object_test_signaled_rcu for VIRTGPU_WAIT_NOWAIT.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190829103301.3539-3-kraxel@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/virtio/virtgpu_ioctl.c | 28 +++++++++++++++-----------
 1 file changed, 16 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/virtio/virtgpu_ioctl.c b/drivers/gpu/drm/virtio/virtgpu_ioctl.c
index 0a88ef11b9d3f..a662394f68921 100644
--- a/drivers/gpu/drm/virtio/virtgpu_ioctl.c
+++ b/drivers/gpu/drm/virtio/virtgpu_ioctl.c
@@ -463,25 +463,29 @@ out:
 }
 
 static int virtio_gpu_wait_ioctl(struct drm_device *dev, void *data,
-			    struct drm_file *file)
+				 struct drm_file *file)
 {
 	struct drm_virtgpu_3d_wait *args = data;
-	struct drm_gem_object *gobj = NULL;
-	struct virtio_gpu_object *qobj = NULL;
+	struct drm_gem_object *obj;
+	long timeout = 15 * HZ;
 	int ret;
-	bool nowait = false;
 
-	gobj = drm_gem_object_lookup(file, args->handle);
-	if (gobj == NULL)
+	obj = drm_gem_object_lookup(file, args->handle);
+	if (obj == NULL)
 		return -ENOENT;
 
-	qobj = gem_to_virtio_gpu_obj(gobj);
-
-	if (args->flags & VIRTGPU_WAIT_NOWAIT)
-		nowait = true;
-	ret = virtio_gpu_object_wait(qobj, nowait);
+	if (args->flags & VIRTGPU_WAIT_NOWAIT) {
+		ret = dma_resv_test_signaled_rcu(obj->resv, true);
+	} else {
+		ret = dma_resv_wait_timeout_rcu(obj->resv, true, true,
+						timeout);
+	}
+	if (ret == 0)
+		ret = -EBUSY;
+	else if (ret > 0)
+		ret = 0;
 
-	drm_gem_object_put_unlocked(gobj);
+	drm_gem_object_put_unlocked(obj);
 	return ret;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.4 002/350] drm/virtio: switch virtio_gpu_wait_ioctl() to gem helper.

[Sasha Levin]

From: Gerd Hoffmann <kraxel@redhat.com>

[ Upstream commit 29cf12394c0565d7eb1685bf0c1b4749aa6a8b66 ]

Use drm_gem_reservation_object_wait() in virtio_gpu_wait_ioctl().
This also makes the ioctl run lockless.

v9: fix return value.
v5: handle lookup failure.
v2: use reservation_object_test_signaled_rcu for VIRTGPU_WAIT_NOWAIT.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190829103301.3539-3-kraxel@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/virtio/virtgpu_ioctl.c | 28 +++++++++++++++-----------
 1 file changed, 16 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/virtio/virtgpu_ioctl.c b/drivers/gpu/drm/virtio/virtgpu_ioctl.c
index 0a88ef11b9d3f..a662394f68921 100644
--- a/drivers/gpu/drm/virtio/virtgpu_ioctl.c
+++ b/drivers/gpu/drm/virtio/virtgpu_ioctl.c
@@ -463,25 +463,29 @@ out:
 }
 
 static int virtio_gpu_wait_ioctl(struct drm_device *dev, void *data,
-			    struct drm_file *file)
+				 struct drm_file *file)
 {
 	struct drm_virtgpu_3d_wait *args = data;
-	struct drm_gem_object *gobj = NULL;
-	struct virtio_gpu_object *qobj = NULL;
+	struct drm_gem_object *obj;
+	long timeout = 15 * HZ;
 	int ret;
-	bool nowait = false;
 
-	gobj = drm_gem_object_lookup(file, args->handle);
-	if (gobj == NULL)
+	obj = drm_gem_object_lookup(file, args->handle);
+	if (obj == NULL)
 		return -ENOENT;
 
-	qobj = gem_to_virtio_gpu_obj(gobj);
-
-	if (args->flags & VIRTGPU_WAIT_NOWAIT)
-		nowait = true;
-	ret = virtio_gpu_object_wait(qobj, nowait);
+	if (args->flags & VIRTGPU_WAIT_NOWAIT) {
+		ret = dma_resv_test_signaled_rcu(obj->resv, true);
+	} else {
+		ret = dma_resv_wait_timeout_rcu(obj->resv, true, true,
+						timeout);
+	}
+	if (ret == 0)
+		ret = -EBUSY;
+	else if (ret > 0)
+		ret = 0;
 
-	drm_gem_object_put_unlocked(gobj);
+	drm_gem_object_put_unlocked(obj);
 	return ret;
 }
 
-- 
2.20.1

[PATCH AUTOSEL 5.4 002/350] drm/virtio: switch virtio_gpu_wait_ioctl() to gem helper.

[Sasha Levin]

From: Gerd Hoffmann <kraxel@redhat.com>

[ Upstream commit 29cf12394c0565d7eb1685bf0c1b4749aa6a8b66 ]

Use drm_gem_reservation_object_wait() in virtio_gpu_wait_ioctl().
This also makes the ioctl run lockless.

v9: fix return value.
v5: handle lookup failure.
v2: use reservation_object_test_signaled_rcu for VIRTGPU_WAIT_NOWAIT.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190829103301.3539-3-kraxel@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/virtio/virtgpu_ioctl.c | 28 +++++++++++++++-----------
 1 file changed, 16 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/virtio/virtgpu_ioctl.c b/drivers/gpu/drm/virtio/virtgpu_ioctl.c
index 0a88ef11b9d3f..a662394f68921 100644
--- a/drivers/gpu/drm/virtio/virtgpu_ioctl.c
+++ b/drivers/gpu/drm/virtio/virtgpu_ioctl.c
@@ -463,25 +463,29 @@ out:
 }
 
 static int virtio_gpu_wait_ioctl(struct drm_device *dev, void *data,
-			    struct drm_file *file)
+				 struct drm_file *file)
 {
 	struct drm_virtgpu_3d_wait *args = data;
-	struct drm_gem_object *gobj = NULL;
-	struct virtio_gpu_object *qobj = NULL;
+	struct drm_gem_object *obj;
+	long timeout = 15 * HZ;
 	int ret;
-	bool nowait = false;
 
-	gobj = drm_gem_object_lookup(file, args->handle);
-	if (gobj == NULL)
+	obj = drm_gem_object_lookup(file, args->handle);
+	if (obj == NULL)
 		return -ENOENT;
 
-	qobj = gem_to_virtio_gpu_obj(gobj);
-
-	if (args->flags & VIRTGPU_WAIT_NOWAIT)
-		nowait = true;
-	ret = virtio_gpu_object_wait(qobj, nowait);
+	if (args->flags & VIRTGPU_WAIT_NOWAIT) {
+		ret = dma_resv_test_signaled_rcu(obj->resv, true);
+	} else {
+		ret = dma_resv_wait_timeout_rcu(obj->resv, true, true,
+						timeout);
+	}
+	if (ret == 0)
+		ret = -EBUSY;
+	else if (ret > 0)
+		ret = 0;
 
-	drm_gem_object_put_unlocked(gobj);
+	drm_gem_object_put_unlocked(obj);
 	return ret;
 }
 
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.4 003/350] drm: mst: Fix query_payload ack reply struct

[Sasha Levin]

From: Sean Paul <seanpaul@chromium.org>

[ Upstream commit 268de6530aa18fe5773062367fd119f0045f6e88 ]

Spec says[1] Allocated_PBN is 16 bits

[1]- DisplayPort 1.2 Spec, Section 2.11.9.8, Table 2-98

Fixes: ad7f8a1f9ced ("drm/helper: add Displayport multi-stream helper (v0.6)")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Todd Previte <tprevite@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829165223.129662-1-sean@poorly.run
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/drm/drm_dp_mst_helper.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/drm/drm_dp_mst_helper.h b/include/drm/drm_dp_mst_helper.h
index 2ba6253ea6d3f..fc349204a71bd 100644
--- a/include/drm/drm_dp_mst_helper.h
+++ b/include/drm/drm_dp_mst_helper.h
@@ -334,7 +334,7 @@ struct drm_dp_resource_status_notify {
 
 struct drm_dp_query_payload_ack_reply {
 	u8 port_number;
-	u8 allocated_pbn;
+	u16 allocated_pbn;
 };
 
 struct drm_dp_sideband_msg_req_body {
-- 
2.20.1

[PATCH AUTOSEL 5.4 003/350] drm: mst: Fix query_payload ack reply struct

[Sasha Levin]

From: Sean Paul <seanpaul@chromium.org>

[ Upstream commit 268de6530aa18fe5773062367fd119f0045f6e88 ]

Spec says[1] Allocated_PBN is 16 bits

[1]- DisplayPort 1.2 Spec, Section 2.11.9.8, Table 2-98

Fixes: ad7f8a1f9ced ("drm/helper: add Displayport multi-stream helper (v0.6)")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Todd Previte <tprevite@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829165223.129662-1-sean@poorly.run
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/drm/drm_dp_mst_helper.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/drm/drm_dp_mst_helper.h b/include/drm/drm_dp_mst_helper.h
index 2ba6253ea6d3f..fc349204a71bd 100644
--- a/include/drm/drm_dp_mst_helper.h
+++ b/include/drm/drm_dp_mst_helper.h
@@ -334,7 +334,7 @@ struct drm_dp_resource_status_notify {
 
 struct drm_dp_query_payload_ack_reply {
 	u8 port_number;
-	u8 allocated_pbn;
+	u16 allocated_pbn;
 };
 
 struct drm_dp_sideband_msg_req_body {
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.4 004/350] drm/mipi-dbi: fix a loop in debugfs code

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit d72cf01f410aa09868d98b672f3f92328c96b32d ]

This code will likely crash if we try to do a zero byte write.  The code
looks like this:

        /* strip trailing whitespace */
        for (i = count - 1; i > 0; i--)
                if (isspace(buf[i]))
			...

We're writing zero bytes so count = 0.  You would think that "count - 1"
would be negative one, but because "i" is unsigned it is a large
positive numer instead.  The "i > 0" condition is true and the "buf[i]"
access will be out of bounds.

The fix is to make "i" signed and now everything works as expected.  The
upper bound of "count" is capped in __kernel_write() at MAX_RW_COUNT so
we don't have to worry about it being higher than INT_MAX.

Fixes: 02dd95fe3169 ("drm/tinydrm: Add MIPI DBI support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[noralf: Adjust title]
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190821072456.GJ26957@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/drm_mipi_dbi.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_mipi_dbi.c b/drivers/gpu/drm/drm_mipi_dbi.c
index 1961f713aaab4..c4ee2709a6f32 100644
--- a/drivers/gpu/drm/drm_mipi_dbi.c
+++ b/drivers/gpu/drm/drm_mipi_dbi.c
@@ -1187,8 +1187,7 @@ static ssize_t mipi_dbi_debugfs_command_write(struct file *file,
 	struct mipi_dbi_dev *dbidev = m->private;
 	u8 val, cmd = 0, parameters[64];
 	char *buf, *pos, *token;
-	unsigned int i;
-	int ret, idx;
+	int i, ret, idx;
 
 	if (!drm_dev_enter(&dbidev->drm, &idx))
 		return -ENODEV;
-- 
2.20.1

[PATCH AUTOSEL 5.4 004/350] drm/mipi-dbi: fix a loop in debugfs code

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit d72cf01f410aa09868d98b672f3f92328c96b32d ]

This code will likely crash if we try to do a zero byte write.  The code
looks like this:

        /* strip trailing whitespace */
        for (i = count - 1; i > 0; i--)
                if (isspace(buf[i]))
			...

We're writing zero bytes so count = 0.  You would think that "count - 1"
would be negative one, but because "i" is unsigned it is a large
positive numer instead.  The "i > 0" condition is true and the "buf[i]"
access will be out of bounds.

The fix is to make "i" signed and now everything works as expected.  The
upper bound of "count" is capped in __kernel_write() at MAX_RW_COUNT so
we don't have to worry about it being higher than INT_MAX.

Fixes: 02dd95fe3169 ("drm/tinydrm: Add MIPI DBI support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[noralf: Adjust title]
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190821072456.GJ26957@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/drm_mipi_dbi.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/drm_mipi_dbi.c b/drivers/gpu/drm/drm_mipi_dbi.c
index 1961f713aaab4..c4ee2709a6f32 100644
--- a/drivers/gpu/drm/drm_mipi_dbi.c
+++ b/drivers/gpu/drm/drm_mipi_dbi.c
@@ -1187,8 +1187,7 @@ static ssize_t mipi_dbi_debugfs_command_write(struct file *file,
 	struct mipi_dbi_dev *dbidev = m->private;
 	u8 val, cmd = 0, parameters[64];
 	char *buf, *pos, *token;
-	unsigned int i;
-	int ret, idx;
+	int i, ret, idx;
 
 	if (!drm_dev_enter(&dbidev->drm, &idx))
 		return -ENODEV;
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.4 005/350] drm/panel: Add missing drm_panel_init() in panel drivers

[Sasha Levin]

From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

[ Upstream commit 65abbda8ed7ca48c8807d6b04a77431b438fa659 ]

Panels must be initialised with drm_panel_init(). Add the missing
function call in the panel-raspberrypi-touchscreen.c and
panel-sitronix-st7789v.c drivers.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823193245.23876-2-laurent.pinchart@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c | 1 +
 drivers/gpu/drm/panel/panel-sitronix-st7789v.c        | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
index b5b14aa059ea7..2aa89eaecf6ff 100644
--- a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
+++ b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
@@ -426,6 +426,7 @@ static int rpi_touchscreen_probe(struct i2c_client *i2c,
 		return PTR_ERR(ts->dsi);
 	}
 
+	drm_panel_init(&ts->base);
 	ts->base.dev = dev;
 	ts->base.funcs = &rpi_touchscreen_funcs;
 
diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
index 5e3e92ea9ea69..3b2612ae931e8 100644
--- a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
@@ -381,6 +381,7 @@ static int st7789v_probe(struct spi_device *spi)
 	spi_set_drvdata(spi, ctx);
 	ctx->spi = spi;
 
+	drm_panel_init(&ctx->panel);
 	ctx->panel.dev = &spi->dev;
 	ctx->panel.funcs = &st7789v_drm_funcs;
 
-- 
2.20.1

[PATCH AUTOSEL 5.4 005/350] drm/panel: Add missing drm_panel_init() in panel drivers

[Sasha Levin]

From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

[ Upstream commit 65abbda8ed7ca48c8807d6b04a77431b438fa659 ]

Panels must be initialised with drm_panel_init(). Add the missing
function call in the panel-raspberrypi-touchscreen.c and
panel-sitronix-st7789v.c drivers.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823193245.23876-2-laurent.pinchart@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c | 1 +
 drivers/gpu/drm/panel/panel-sitronix-st7789v.c        | 1 +
 2 files changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
index b5b14aa059ea7..2aa89eaecf6ff 100644
--- a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
+++ b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
@@ -426,6 +426,7 @@ static int rpi_touchscreen_probe(struct i2c_client *i2c,
 		return PTR_ERR(ts->dsi);
 	}
 
+	drm_panel_init(&ts->base);
 	ts->base.dev = dev;
 	ts->base.funcs = &rpi_touchscreen_funcs;
 
diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
index 5e3e92ea9ea69..3b2612ae931e8 100644
--- a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
@@ -381,6 +381,7 @@ static int st7789v_probe(struct spi_device *spi)
 	spi_set_drvdata(spi, ctx);
 	ctx->spi = spi;
 
+	drm_panel_init(&ctx->panel);
 	ctx->panel.dev = &spi->dev;
 	ctx->panel.funcs = &st7789v_drm_funcs;
 
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.4 006/350] drm: exynos: exynos_hdmi: use cec_notifier_conn_(un)register

[Sasha Levin]

From: Dariusz Marcinkiewicz <darekm@google.com>

[ Upstream commit 71137bfd98973efb7b762ba168df077b87b34311 ]

Use the new cec_notifier_conn_(un)register() functions to
(un)register the notifier for the HDMI connector, and fill in
the cec_connector_info.

Changes since v7:
	- err_runtime_disable -> err_rpm_disable
Changes since v2:
	- removed unnecessary call to invalidate phys address before
	deregistering the notifier,
	- use cec_notifier_phys_addr_invalidate instead of setting
	invalid address on a notifier.

Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: use 'if (!hdata->notifier)' instead of '== NULL']
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20190828123415.139441-1-darekm@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/exynos/exynos_hdmi.c | 31 ++++++++++++++++------------
 1 file changed, 18 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c
index bc1565f1822ab..09aa73c0f2add 100644
--- a/drivers/gpu/drm/exynos/exynos_hdmi.c
+++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
@@ -852,6 +852,10 @@ static enum drm_connector_status hdmi_detect(struct drm_connector *connector,
 
 static void hdmi_connector_destroy(struct drm_connector *connector)
 {
+	struct hdmi_context *hdata = connector_to_hdmi(connector);
+
+	cec_notifier_conn_unregister(hdata->notifier);
+
 	drm_connector_unregister(connector);
 	drm_connector_cleanup(connector);
 }
@@ -935,6 +939,7 @@ static int hdmi_create_connector(struct drm_encoder *encoder)
 {
 	struct hdmi_context *hdata = encoder_to_hdmi(encoder);
 	struct drm_connector *connector = &hdata->connector;
+	struct cec_connector_info conn_info;
 	int ret;
 
 	connector->interlace_allowed = true;
@@ -957,6 +962,15 @@ static int hdmi_create_connector(struct drm_encoder *encoder)
 			DRM_DEV_ERROR(hdata->dev, "Failed to attach bridge\n");
 	}
 
+	cec_fill_conn_info_from_drm(&conn_info, connector);
+
+	hdata->notifier = cec_notifier_conn_register(hdata->dev, NULL,
+						     &conn_info);
+	if (!hdata->notifier) {
+		ret = -ENOMEM;
+		DRM_DEV_ERROR(hdata->dev, "Failed to allocate CEC notifier\n");
+	}
+
 	return ret;
 }
 
@@ -1528,8 +1542,8 @@ static void hdmi_disable(struct drm_encoder *encoder)
 		 */
 		mutex_unlock(&hdata->mutex);
 		cancel_delayed_work(&hdata->hotplug_work);
-		cec_notifier_set_phys_addr(hdata->notifier,
-					   CEC_PHYS_ADDR_INVALID);
+		if (hdata->notifier)
+			cec_notifier_phys_addr_invalidate(hdata->notifier);
 		return;
 	}
 
@@ -2006,12 +2020,6 @@ static int hdmi_probe(struct platform_device *pdev)
 		}
 	}
 
-	hdata->notifier = cec_notifier_get(&pdev->dev);
-	if (hdata->notifier == NULL) {
-		ret = -ENOMEM;
-		goto err_hdmiphy;
-	}
-
 	pm_runtime_enable(dev);
 
 	audio_infoframe = &hdata->audio.infoframe;
@@ -2023,7 +2031,7 @@ static int hdmi_probe(struct platform_device *pdev)
 
 	ret = hdmi_register_audio_device(hdata);
 	if (ret)
-		goto err_notifier_put;
+		goto err_rpm_disable;
 
 	ret = component_add(&pdev->dev, &hdmi_component_ops);
 	if (ret)
@@ -2034,8 +2042,7 @@ static int hdmi_probe(struct platform_device *pdev)
 err_unregister_audio:
 	platform_device_unregister(hdata->audio.pdev);
 
-err_notifier_put:
-	cec_notifier_put(hdata->notifier);
+err_rpm_disable:
 	pm_runtime_disable(dev);
 
 err_hdmiphy:
@@ -2054,12 +2061,10 @@ static int hdmi_remove(struct platform_device *pdev)
 	struct hdmi_context *hdata = platform_get_drvdata(pdev);
 
 	cancel_delayed_work_sync(&hdata->hotplug_work);
-	cec_notifier_set_phys_addr(hdata->notifier, CEC_PHYS_ADDR_INVALID);
 
 	component_del(&pdev->dev, &hdmi_component_ops);
 	platform_device_unregister(hdata->audio.pdev);
 
-	cec_notifier_put(hdata->notifier);
 	pm_runtime_disable(&pdev->dev);
 
 	if (!IS_ERR(hdata->reg_hdmi_en))
-- 
2.20.1

[PATCH AUTOSEL 5.4 006/350] drm: exynos: exynos_hdmi: use cec_notifier_conn_(un)register

[Sasha Levin]

From: Dariusz Marcinkiewicz <darekm@google.com>

[ Upstream commit 71137bfd98973efb7b762ba168df077b87b34311 ]

Use the new cec_notifier_conn_(un)register() functions to
(un)register the notifier for the HDMI connector, and fill in
the cec_connector_info.

Changes since v7:
	- err_runtime_disable -> err_rpm_disable
Changes since v2:
	- removed unnecessary call to invalidate phys address before
	deregistering the notifier,
	- use cec_notifier_phys_addr_invalidate instead of setting
	invalid address on a notifier.

Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: use 'if (!hdata->notifier)' instead of '== NULL']
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20190828123415.139441-1-darekm@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/exynos/exynos_hdmi.c | 31 ++++++++++++++++------------
 1 file changed, 18 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c
index bc1565f1822ab..09aa73c0f2add 100644
--- a/drivers/gpu/drm/exynos/exynos_hdmi.c
+++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
@@ -852,6 +852,10 @@ static enum drm_connector_status hdmi_detect(struct drm_connector *connector,
 
 static void hdmi_connector_destroy(struct drm_connector *connector)
 {
+	struct hdmi_context *hdata = connector_to_hdmi(connector);
+
+	cec_notifier_conn_unregister(hdata->notifier);
+
 	drm_connector_unregister(connector);
 	drm_connector_cleanup(connector);
 }
@@ -935,6 +939,7 @@ static int hdmi_create_connector(struct drm_encoder *encoder)
 {
 	struct hdmi_context *hdata = encoder_to_hdmi(encoder);
 	struct drm_connector *connector = &hdata->connector;
+	struct cec_connector_info conn_info;
 	int ret;
 
 	connector->interlace_allowed = true;
@@ -957,6 +962,15 @@ static int hdmi_create_connector(struct drm_encoder *encoder)
 			DRM_DEV_ERROR(hdata->dev, "Failed to attach bridge\n");
 	}
 
+	cec_fill_conn_info_from_drm(&conn_info, connector);
+
+	hdata->notifier = cec_notifier_conn_register(hdata->dev, NULL,
+						     &conn_info);
+	if (!hdata->notifier) {
+		ret = -ENOMEM;
+		DRM_DEV_ERROR(hdata->dev, "Failed to allocate CEC notifier\n");
+	}
+
 	return ret;
 }
 
@@ -1528,8 +1542,8 @@ static void hdmi_disable(struct drm_encoder *encoder)
 		 */
 		mutex_unlock(&hdata->mutex);
 		cancel_delayed_work(&hdata->hotplug_work);
-		cec_notifier_set_phys_addr(hdata->notifier,
-					   CEC_PHYS_ADDR_INVALID);
+		if (hdata->notifier)
+			cec_notifier_phys_addr_invalidate(hdata->notifier);
 		return;
 	}
 
@@ -2006,12 +2020,6 @@ static int hdmi_probe(struct platform_device *pdev)
 		}
 	}
 
-	hdata->notifier = cec_notifier_get(&pdev->dev);
-	if (hdata->notifier == NULL) {
-		ret = -ENOMEM;
-		goto err_hdmiphy;
-	}
-
 	pm_runtime_enable(dev);
 
 	audio_infoframe = &hdata->audio.infoframe;
@@ -2023,7 +2031,7 @@ static int hdmi_probe(struct platform_device *pdev)
 
 	ret = hdmi_register_audio_device(hdata);
 	if (ret)
-		goto err_notifier_put;
+		goto err_rpm_disable;
 
 	ret = component_add(&pdev->dev, &hdmi_component_ops);
 	if (ret)
@@ -2034,8 +2042,7 @@ static int hdmi_probe(struct platform_device *pdev)
 err_unregister_audio:
 	platform_device_unregister(hdata->audio.pdev);
 
-err_notifier_put:
-	cec_notifier_put(hdata->notifier);
+err_rpm_disable:
 	pm_runtime_disable(dev);
 
 err_hdmiphy:
@@ -2054,12 +2061,10 @@ static int hdmi_remove(struct platform_device *pdev)
 	struct hdmi_context *hdata = platform_get_drvdata(pdev);
 
 	cancel_delayed_work_sync(&hdata->hotplug_work);
-	cec_notifier_set_phys_addr(hdata->notifier, CEC_PHYS_ADDR_INVALID);
 
 	component_del(&pdev->dev, &hdmi_component_ops);
 	platform_device_unregister(hdata->audio.pdev);
 
-	cec_notifier_put(hdata->notifier);
 	pm_runtime_disable(&pdev->dev);
 
 	if (!IS_ERR(hdata->reg_hdmi_en))
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.4 006/350] drm: exynos: exynos_hdmi: use cec_notifier_conn_(un)register

[Sasha Levin]

From: Dariusz Marcinkiewicz <darekm@google.com>

[ Upstream commit 71137bfd98973efb7b762ba168df077b87b34311 ]

Use the new cec_notifier_conn_(un)register() functions to
(un)register the notifier for the HDMI connector, and fill in
the cec_connector_info.

Changes since v7:
	- err_runtime_disable -> err_rpm_disable
Changes since v2:
	- removed unnecessary call to invalidate phys address before
	deregistering the notifier,
	- use cec_notifier_phys_addr_invalidate instead of setting
	invalid address on a notifier.

Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: use 'if (!hdata->notifier)' instead of '== NULL']
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20190828123415.139441-1-darekm@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/exynos/exynos_hdmi.c | 31 ++++++++++++++++------------
 1 file changed, 18 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c
index bc1565f1822ab..09aa73c0f2add 100644
--- a/drivers/gpu/drm/exynos/exynos_hdmi.c
+++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
@@ -852,6 +852,10 @@ static enum drm_connector_status hdmi_detect(struct drm_connector *connector,
 
 static void hdmi_connector_destroy(struct drm_connector *connector)
 {
+	struct hdmi_context *hdata = connector_to_hdmi(connector);
+
+	cec_notifier_conn_unregister(hdata->notifier);
+
 	drm_connector_unregister(connector);
 	drm_connector_cleanup(connector);
 }
@@ -935,6 +939,7 @@ static int hdmi_create_connector(struct drm_encoder *encoder)
 {
 	struct hdmi_context *hdata = encoder_to_hdmi(encoder);
 	struct drm_connector *connector = &hdata->connector;
+	struct cec_connector_info conn_info;
 	int ret;
 
 	connector->interlace_allowed = true;
@@ -957,6 +962,15 @@ static int hdmi_create_connector(struct drm_encoder *encoder)
 			DRM_DEV_ERROR(hdata->dev, "Failed to attach bridge\n");
 	}
 
+	cec_fill_conn_info_from_drm(&conn_info, connector);
+
+	hdata->notifier = cec_notifier_conn_register(hdata->dev, NULL,
+						     &conn_info);
+	if (!hdata->notifier) {
+		ret = -ENOMEM;
+		DRM_DEV_ERROR(hdata->dev, "Failed to allocate CEC notifier\n");
+	}
+
 	return ret;
 }
 
@@ -1528,8 +1542,8 @@ static void hdmi_disable(struct drm_encoder *encoder)
 		 */
 		mutex_unlock(&hdata->mutex);
 		cancel_delayed_work(&hdata->hotplug_work);
-		cec_notifier_set_phys_addr(hdata->notifier,
-					   CEC_PHYS_ADDR_INVALID);
+		if (hdata->notifier)
+			cec_notifier_phys_addr_invalidate(hdata->notifier);
 		return;
 	}
 
@@ -2006,12 +2020,6 @@ static int hdmi_probe(struct platform_device *pdev)
 		}
 	}
 
-	hdata->notifier = cec_notifier_get(&pdev->dev);
-	if (hdata->notifier == NULL) {
-		ret = -ENOMEM;
-		goto err_hdmiphy;
-	}
-
 	pm_runtime_enable(dev);
 
 	audio_infoframe = &hdata->audio.infoframe;
@@ -2023,7 +2031,7 @@ static int hdmi_probe(struct platform_device *pdev)
 
 	ret = hdmi_register_audio_device(hdata);
 	if (ret)
-		goto err_notifier_put;
+		goto err_rpm_disable;
 
 	ret = component_add(&pdev->dev, &hdmi_component_ops);
 	if (ret)
@@ -2034,8 +2042,7 @@ static int hdmi_probe(struct platform_device *pdev)
 err_unregister_audio:
 	platform_device_unregister(hdata->audio.pdev);
 
-err_notifier_put:
-	cec_notifier_put(hdata->notifier);
+err_rpm_disable:
 	pm_runtime_disable(dev);
 
 err_hdmiphy:
@@ -2054,12 +2061,10 @@ static int hdmi_remove(struct platform_device *pdev)
 	struct hdmi_context *hdata = platform_get_drvdata(pdev);
 
 	cancel_delayed_work_sync(&hdata->hotplug_work);
-	cec_notifier_set_phys_addr(hdata->notifier, CEC_PHYS_ADDR_INVALID);
 
 	component_del(&pdev->dev, &hdmi_component_ops);
 	platform_device_unregister(hdata->audio.pdev);
 
-	cec_notifier_put(hdata->notifier);
 	pm_runtime_disable(&pdev->dev);
 
 	if (!IS_ERR(hdata->reg_hdmi_en))
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 007/350] drm: Use EOPNOTSUPP, not ENOTSUPP

[Sasha Levin]

From: Daniel Vetter <daniel.vetter@ffwll.ch>

[ Upstream commit c7581a414d28413c1dd6d116d44859b5a52e0950 ]

- it's what we recommend in our docs:

https://dri.freedesktop.org/docs/drm/gpu/drm-uapi.html#recommended-ioctl-return-values

- it's the overwhelmingly used error code for "operation not
  supported", at least in drm core (slightly less so in drivers):

$ git grep EOPNOTSUPP -- drivers/gpu/drm/*c | wc -l
83
$ git grep ENOTSUPP -- drivers/gpu/drm/*c | wc -l
5

- include/linux/errno.h makes it fairly clear that these are for nfsv3
  (plus they also have error codes above 512, which is the block with
  some special behaviour ...)

/* Defined for the NFSv3 protocol */

If the above isn't reflecting current practice, then I guess we should
at least update the docs.

Noralf commented:

Ben Hutchings made this comment[1] in a thread about use of ENOTSUPP in
drivers:

  glibc's strerror() returns these strings for ENOTSUPP and EOPNOTSUPP
  respectively:

  "Unknown error 524"
  "Operation not supported"

So at least for errors returned to userspace EOPNOTSUPP makes sense.

José asked:

> Hopefully this will not break any userspace

None of the functions in drm_edid.c affected by this reach userspace,
it's all driver internal.

Same for the mipi function, that error code should be handled by
drivers. Drivers are supposed to remap "the hw is on fire" to EIO when
reporting up to userspace, but I think if a driver sees this it would
be a driver bug.
v2: Augment commit message with comments from Noralf and José

Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Sean Paul <sean@poorly.run>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Andres Rodriguez <andresx7@gmail.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904143942.31756-1-daniel.vetter@ffwll.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/drm_edid.c     | 6 +++---
 drivers/gpu/drm/drm_mipi_dbi.c | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 6b0177112e18d..3f50b8865db4c 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -3722,7 +3722,7 @@ cea_db_offsets(const u8 *cea, int *start, int *end)
 		if (*end < 4 || *end > 127)
 			return -ERANGE;
 	} else {
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 	}
 
 	return 0;
@@ -4191,7 +4191,7 @@ int drm_edid_to_sad(struct edid *edid, struct cea_sad **sads)
 
 	if (cea_revision(cea) < 3) {
 		DRM_DEBUG_KMS("SAD: wrong CEA revision\n");
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 	}
 
 	if (cea_db_offsets(cea, &start, &end)) {
@@ -4252,7 +4252,7 @@ int drm_edid_to_speaker_allocation(struct edid *edid, u8 **sadb)
 
 	if (cea_revision(cea) < 3) {
 		DRM_DEBUG_KMS("SAD: wrong CEA revision\n");
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 	}
 
 	if (cea_db_offsets(cea, &start, &end)) {
diff --git a/drivers/gpu/drm/drm_mipi_dbi.c b/drivers/gpu/drm/drm_mipi_dbi.c
index c4ee2709a6f32..f8154316a3b0d 100644
--- a/drivers/gpu/drm/drm_mipi_dbi.c
+++ b/drivers/gpu/drm/drm_mipi_dbi.c
@@ -955,7 +955,7 @@ static int mipi_dbi_typec1_command(struct mipi_dbi *dbi, u8 *cmd,
 	int ret;
 
 	if (mipi_dbi_command_is_read(dbi, *cmd))
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	MIPI_DBI_DEBUG_COMMAND(*cmd, parameters, num);
 
-- 
2.20.1

[PATCH AUTOSEL 5.4 007/350] drm: Use EOPNOTSUPP, not ENOTSUPP

[Sasha Levin]

From: Daniel Vetter <daniel.vetter@ffwll.ch>

[ Upstream commit c7581a414d28413c1dd6d116d44859b5a52e0950 ]

- it's what we recommend in our docs:

https://dri.freedesktop.org/docs/drm/gpu/drm-uapi.html#recommended-ioctl-return-values

- it's the overwhelmingly used error code for "operation not
  supported", at least in drm core (slightly less so in drivers):

$ git grep EOPNOTSUPP -- drivers/gpu/drm/*c | wc -l
83
$ git grep ENOTSUPP -- drivers/gpu/drm/*c | wc -l
5

- include/linux/errno.h makes it fairly clear that these are for nfsv3
  (plus they also have error codes above 512, which is the block with
  some special behaviour ...)

/* Defined for the NFSv3 protocol */

If the above isn't reflecting current practice, then I guess we should
at least update the docs.

Noralf commented:

Ben Hutchings made this comment[1] in a thread about use of ENOTSUPP in
drivers:

  glibc's strerror() returns these strings for ENOTSUPP and EOPNOTSUPP
  respectively:

  "Unknown error 524"
  "Operation not supported"

So at least for errors returned to userspace EOPNOTSUPP makes sense.

José asked:

> Hopefully this will not break any userspace

None of the functions in drm_edid.c affected by this reach userspace,
it's all driver internal.

Same for the mipi function, that error code should be handled by
drivers. Drivers are supposed to remap "the hw is on fire" to EIO when
reporting up to userspace, but I think if a driver sees this it would
be a driver bug.
v2: Augment commit message with comments from Noralf and José

Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Sean Paul <sean@poorly.run>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Andres Rodriguez <andresx7@gmail.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190904143942.31756-1-daniel.vetter@ffwll.ch
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/drm_edid.c     | 6 +++---
 drivers/gpu/drm/drm_mipi_dbi.c | 2 +-
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 6b0177112e18d..3f50b8865db4c 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -3722,7 +3722,7 @@ cea_db_offsets(const u8 *cea, int *start, int *end)
 		if (*end < 4 || *end > 127)
 			return -ERANGE;
 	} else {
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 	}
 
 	return 0;
@@ -4191,7 +4191,7 @@ int drm_edid_to_sad(struct edid *edid, struct cea_sad **sads)
 
 	if (cea_revision(cea) < 3) {
 		DRM_DEBUG_KMS("SAD: wrong CEA revision\n");
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 	}
 
 	if (cea_db_offsets(cea, &start, &end)) {
@@ -4252,7 +4252,7 @@ int drm_edid_to_speaker_allocation(struct edid *edid, u8 **sadb)
 
 	if (cea_revision(cea) < 3) {
 		DRM_DEBUG_KMS("SAD: wrong CEA revision\n");
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 	}
 
 	if (cea_db_offsets(cea, &start, &end)) {
diff --git a/drivers/gpu/drm/drm_mipi_dbi.c b/drivers/gpu/drm/drm_mipi_dbi.c
index c4ee2709a6f32..f8154316a3b0d 100644
--- a/drivers/gpu/drm/drm_mipi_dbi.c
+++ b/drivers/gpu/drm/drm_mipi_dbi.c
@@ -955,7 +955,7 @@ static int mipi_dbi_typec1_command(struct mipi_dbi *dbi, u8 *cmd,
 	int ret;
 
 	if (mipi_dbi_command_is_read(dbi, *cmd))
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 
 	MIPI_DBI_DEBUG_COMMAND(*cmd, parameters, num);
 
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.4 008/350] drm/amd/display: verify stream link before link test

[Sasha Levin]

From: Jing Zhou <Jing.Zhou@amd.com>

[ Upstream commit b131932215c993ea5adf8192d1de2e8d6b23048d ]

[Why]
DP1.2 LL CTS test failure.

[How]
The failure is caused by not verify stream link is equal
to link, only check stream and link is not null.

Signed-off-by: Jing Zhou <Jing.Zhou@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link_hwss.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_hwss.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_hwss.c
index 79438c4f1e20b..a519dbc5ecb65 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_hwss.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_hwss.c
@@ -277,7 +277,8 @@ void dp_retrain_link_dp_test(struct dc_link *link,
 		if (pipes[i].stream != NULL &&
 			!pipes[i].top_pipe && !pipes[i].prev_odm_pipe &&
 			pipes[i].stream->link != NULL &&
-			pipes[i].stream_res.stream_enc != NULL) {
+			pipes[i].stream_res.stream_enc != NULL &&
+			pipes[i].stream->link == link) {
 			udelay(100);
 
 			pipes[i].stream_res.stream_enc->funcs->dp_blank(
-- 
2.20.1

[PATCH AUTOSEL 5.4 008/350] drm/amd/display: verify stream link before link test

[Sasha Levin]

From: Jing Zhou <Jing.Zhou@amd.com>

[ Upstream commit b131932215c993ea5adf8192d1de2e8d6b23048d ]

[Why]
DP1.2 LL CTS test failure.

[How]
The failure is caused by not verify stream link is equal
to link, only check stream and link is not null.

Signed-off-by: Jing Zhou <Jing.Zhou@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link_hwss.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_hwss.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_hwss.c
index 79438c4f1e20b..a519dbc5ecb65 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_hwss.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_hwss.c
@@ -277,7 +277,8 @@ void dp_retrain_link_dp_test(struct dc_link *link,
 		if (pipes[i].stream != NULL &&
 			!pipes[i].top_pipe && !pipes[i].prev_odm_pipe &&
 			pipes[i].stream->link != NULL &&
-			pipes[i].stream_res.stream_enc != NULL) {
+			pipes[i].stream_res.stream_enc != NULL &&
+			pipes[i].stream->link == link) {
 			udelay(100);
 
 			pipes[i].stream_res.stream_enc->funcs->dp_blank(
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.4 009/350] drm/bridge: analogix-anx78xx: silence -EPROBE_DEFER warnings

[Sasha Levin]

From: Brian Masney <masneyb@onstation.org>

[ Upstream commit 2708e876272d89bbbff811d12834adbeef85f022 ]

Silence two warning messages that occur due to -EPROBE_DEFER errors to
help cleanup the system boot log.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815004854.19860-4-masneyb@onstation.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/analogix-anx78xx.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix-anx78xx.c b/drivers/gpu/drm/bridge/analogix-anx78xx.c
index 3c7cc5af735ce..56df07cdab68f 100644
--- a/drivers/gpu/drm/bridge/analogix-anx78xx.c
+++ b/drivers/gpu/drm/bridge/analogix-anx78xx.c
@@ -715,7 +715,9 @@ static int anx78xx_init_pdata(struct anx78xx *anx78xx)
 	/* 1.0V digital core power regulator  */
 	pdata->dvdd10 = devm_regulator_get(dev, "dvdd10");
 	if (IS_ERR(pdata->dvdd10)) {
-		DRM_ERROR("DVDD10 regulator not found\n");
+		if (PTR_ERR(pdata->dvdd10) != -EPROBE_DEFER)
+			DRM_ERROR("DVDD10 regulator not found\n");
+
 		return PTR_ERR(pdata->dvdd10);
 	}
 
@@ -1332,7 +1334,9 @@ static int anx78xx_i2c_probe(struct i2c_client *client,
 
 	err = anx78xx_init_pdata(anx78xx);
 	if (err) {
-		DRM_ERROR("Failed to initialize pdata: %d\n", err);
+		if (err != -EPROBE_DEFER)
+			DRM_ERROR("Failed to initialize pdata: %d\n", err);
+
 		return err;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 5.4 009/350] drm/bridge: analogix-anx78xx: silence -EPROBE_DEFER warnings

[Sasha Levin]

From: Brian Masney <masneyb@onstation.org>

[ Upstream commit 2708e876272d89bbbff811d12834adbeef85f022 ]

Silence two warning messages that occur due to -EPROBE_DEFER errors to
help cleanup the system boot log.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815004854.19860-4-masneyb@onstation.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/bridge/analogix-anx78xx.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix-anx78xx.c b/drivers/gpu/drm/bridge/analogix-anx78xx.c
index 3c7cc5af735ce..56df07cdab68f 100644
--- a/drivers/gpu/drm/bridge/analogix-anx78xx.c
+++ b/drivers/gpu/drm/bridge/analogix-anx78xx.c
@@ -715,7 +715,9 @@ static int anx78xx_init_pdata(struct anx78xx *anx78xx)
 	/* 1.0V digital core power regulator  */
 	pdata->dvdd10 = devm_regulator_get(dev, "dvdd10");
 	if (IS_ERR(pdata->dvdd10)) {
-		DRM_ERROR("DVDD10 regulator not found\n");
+		if (PTR_ERR(pdata->dvdd10) != -EPROBE_DEFER)
+			DRM_ERROR("DVDD10 regulator not found\n");
+
 		return PTR_ERR(pdata->dvdd10);
 	}
 
@@ -1332,7 +1334,9 @@ static int anx78xx_i2c_probe(struct i2c_client *client,
 
 	err = anx78xx_init_pdata(anx78xx);
 	if (err) {
-		DRM_ERROR("Failed to initialize pdata: %d\n", err);
+		if (err != -EPROBE_DEFER)
+			DRM_ERROR("Failed to initialize pdata: %d\n", err);
+
 		return err;
 	}
 
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.4 010/350] drm/amd/display: OTC underflow fix

[Sasha Levin]

From: Jaehyun Chung <jaehyun.chung@amd.com>

[ Upstream commit 785908cf19c9eb4803f6bf9c0a7447dc3661d5c3 ]

[Why] Underflow occurs on some display setups(repro'd on 3x4K HDR) on boot,
mode set, and hot-plugs with. Underflow occurs because mem clk
is not set high after disabling pstate switching. This behaviour occurs
because some calculations assumed displays were synchronized.

[How] Add a condition to check if timing sync is disabled so that
synchronized vblank can be set to false.

Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
index 6b2f2f1a1c9ce..3980c7b782599 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
@@ -1765,7 +1765,7 @@ int dcn20_populate_dml_pipes_from_context(
 			pipe_cnt = i;
 			continue;
 		}
-		if (!resource_are_streams_timing_synchronizable(
+		if (dc->debug.disable_timing_sync || !resource_are_streams_timing_synchronizable(
 				res_ctx->pipe_ctx[pipe_cnt].stream,
 				res_ctx->pipe_ctx[i].stream)) {
 			synchronized_vblank = false;
-- 
2.20.1

[PATCH AUTOSEL 5.4 010/350] drm/amd/display: OTC underflow fix

[Sasha Levin]

From: Jaehyun Chung <jaehyun.chung@amd.com>

[ Upstream commit 785908cf19c9eb4803f6bf9c0a7447dc3661d5c3 ]

[Why] Underflow occurs on some display setups(repro'd on 3x4K HDR) on boot,
mode set, and hot-plugs with. Underflow occurs because mem clk
is not set high after disabling pstate switching. This behaviour occurs
because some calculations assumed displays were synchronized.

[How] Add a condition to check if timing sync is disabled so that
synchronized vblank can be set to false.

Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
index 6b2f2f1a1c9ce..3980c7b782599 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
@@ -1765,7 +1765,7 @@ int dcn20_populate_dml_pipes_from_context(
 			pipe_cnt = i;
 			continue;
 		}
-		if (!resource_are_streams_timing_synchronizable(
+		if (dc->debug.disable_timing_sync || !resource_are_streams_timing_synchronizable(
 				res_ctx->pipe_ctx[pipe_cnt].stream,
 				res_ctx->pipe_ctx[i].stream)) {
 			synchronized_vblank = false;
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.4 011/350] iio: max31856: add missing of_node and parent references to iio_dev

[Sasha Levin]

From: Andrea Merello <andrea.merello@gmail.com>

[ Upstream commit 505ea3ada665c466d0064b11b6e611b7f995517d ]

Adding missing indio_dev->dev.of_node references so that, in case multiple
max31856 are present, users can get some clues to being able to distinguish
each of them. While at it, add also the missing parent reference.

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/temperature/max31856.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/iio/temperature/max31856.c b/drivers/iio/temperature/max31856.c
index f184ba5601d94..73ed550e3fc95 100644
--- a/drivers/iio/temperature/max31856.c
+++ b/drivers/iio/temperature/max31856.c
@@ -284,6 +284,8 @@ static int max31856_probe(struct spi_device *spi)
 	spi_set_drvdata(spi, indio_dev);
 
 	indio_dev->info = &max31856_info;
+	indio_dev->dev.parent = &spi->dev;
+	indio_dev->dev.of_node = spi->dev.of_node;
 	indio_dev->name = id->name;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->channels = max31856_channels;
-- 
2.20.1

[PATCH AUTOSEL 5.4 012/350] iio: light: bh1750: Resolve compiler warning and make code more readable

[Sasha Levin]

From: Krzysztof Wilczynski <kw@linux.com>

[ Upstream commit f552fde983d378e7339f9ea74a25f918563bf0d3 ]

Separate the declaration of struct bh1750_chip_info from definition
of bh1750_chip_info_tbl[] in a single statement as it makes the code
hard to read, and with the extra newline it makes it look as if the
bh1750_chip_info_tbl[] had no explicit type.

This change also resolves the following compiler warning about the
unusual position of the static keyword that can be seen when building
with warnings enabled (W=1):

drivers/iio/light/bh1750.c:64:1: warning:
  ‘static’ is not at beginning of declaration [-Wold-style-declaration]

Related to commit 3a11fbb037a1 ("iio: light: add support for ROHM
BH1710/BH1715/BH1721/BH1750/BH1751 ambient light sensors").

Signed-off-by: Krzysztof Wilczynski <kw@linux.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/light/bh1750.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/light/bh1750.c b/drivers/iio/light/bh1750.c
index 28347df78cff6..adb5ab9e34390 100644
--- a/drivers/iio/light/bh1750.c
+++ b/drivers/iio/light/bh1750.c
@@ -59,9 +59,9 @@ struct bh1750_chip_info {
 
 	u16 int_time_low_mask;
 	u16 int_time_high_mask;
-}
+};
 
-static const bh1750_chip_info_tbl[] = {
+static const struct bh1750_chip_info bh1750_chip_info_tbl[] = {
 	[BH1710] = { 140, 1022, 300, 400,  250000000, 2, 0x001F, 0x03E0 },
 	[BH1721] = { 140, 1020, 300, 400,  250000000, 2, 0x0010, 0x03E0 },
 	[BH1750] = { 31,  254,  69,  1740, 57500000,  1, 0x001F, 0x00E0 },
-- 
2.20.1

[PATCH AUTOSEL 5.4 013/350] drm/amdgpu/sriov: add ring_stop before ring_create in psp v11 code

[Sasha Levin]

From: Jack Zhang <Jack.Zhang1@amd.com>

[ Upstream commit 51c0f58e9f6af3a387d14608033e6796a7ad90ee ]

psp  v11 code missed ring stop in ring create function(VMR)
while psp v3.1 code had the code. This will cause VM destroy1
fail and psp ring create fail.

For SIOV-VF, ring_stop should not be deleted in ring_create
function.

Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/psp_v11_0.c | 61 ++++++++++++++------------
 1 file changed, 34 insertions(+), 27 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/psp_v11_0.c b/drivers/gpu/drm/amd/amdgpu/psp_v11_0.c
index 10166104b8a39..d483684db95b7 100644
--- a/drivers/gpu/drm/amd/amdgpu/psp_v11_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/psp_v11_0.c
@@ -398,6 +398,34 @@ static bool psp_v11_0_support_vmr_ring(struct psp_context *psp)
 	return false;
 }
 
+static int psp_v11_0_ring_stop(struct psp_context *psp,
+			      enum psp_ring_type ring_type)
+{
+	int ret = 0;
+	struct amdgpu_device *adev = psp->adev;
+
+	/* Write the ring destroy command*/
+	if (psp_v11_0_support_vmr_ring(psp))
+		WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_101,
+				     GFX_CTRL_CMD_ID_DESTROY_GPCOM_RING);
+	else
+		WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_64,
+				     GFX_CTRL_CMD_ID_DESTROY_RINGS);
+
+	/* there might be handshake issue with hardware which needs delay */
+	mdelay(20);
+
+	/* Wait for response flag (bit 31) */
+	if (psp_v11_0_support_vmr_ring(psp))
+		ret = psp_wait_for(psp, SOC15_REG_OFFSET(MP0, 0, mmMP0_SMN_C2PMSG_101),
+				   0x80000000, 0x80000000, false);
+	else
+		ret = psp_wait_for(psp, SOC15_REG_OFFSET(MP0, 0, mmMP0_SMN_C2PMSG_64),
+				   0x80000000, 0x80000000, false);
+
+	return ret;
+}
+
 static int psp_v11_0_ring_create(struct psp_context *psp,
 				enum psp_ring_type ring_type)
 {
@@ -407,6 +435,12 @@ static int psp_v11_0_ring_create(struct psp_context *psp,
 	struct amdgpu_device *adev = psp->adev;
 
 	if (psp_v11_0_support_vmr_ring(psp)) {
+		ret = psp_v11_0_ring_stop(psp, ring_type);
+		if (ret) {
+			DRM_ERROR("psp_v11_0_ring_stop_sriov failed!\n");
+			return ret;
+		}
+
 		/* Write low address of the ring to C2PMSG_102 */
 		psp_ring_reg = lower_32_bits(ring->ring_mem_mc_addr);
 		WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_102, psp_ring_reg);
@@ -451,33 +485,6 @@ static int psp_v11_0_ring_create(struct psp_context *psp,
 	return ret;
 }
 
-static int psp_v11_0_ring_stop(struct psp_context *psp,
-			      enum psp_ring_type ring_type)
-{
-	int ret = 0;
-	struct amdgpu_device *adev = psp->adev;
-
-	/* Write the ring destroy command*/
-	if (psp_v11_0_support_vmr_ring(psp))
-		WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_101,
-				     GFX_CTRL_CMD_ID_DESTROY_GPCOM_RING);
-	else
-		WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_64,
-				     GFX_CTRL_CMD_ID_DESTROY_RINGS);
-
-	/* there might be handshake issue with hardware which needs delay */
-	mdelay(20);
-
-	/* Wait for response flag (bit 31) */
-	if (psp_v11_0_support_vmr_ring(psp))
-		ret = psp_wait_for(psp, SOC15_REG_OFFSET(MP0, 0, mmMP0_SMN_C2PMSG_101),
-				   0x80000000, 0x80000000, false);
-	else
-		ret = psp_wait_for(psp, SOC15_REG_OFFSET(MP0, 0, mmMP0_SMN_C2PMSG_64),
-				   0x80000000, 0x80000000, false);
-
-	return ret;
-}
 
 static int psp_v11_0_ring_destroy(struct psp_context *psp,
 				 enum psp_ring_type ring_type)
-- 
2.20.1

[PATCH AUTOSEL 5.4 013/350] drm/amdgpu/sriov: add ring_stop before ring_create in psp v11 code

[Sasha Levin]

From: Jack Zhang <Jack.Zhang1@amd.com>

[ Upstream commit 51c0f58e9f6af3a387d14608033e6796a7ad90ee ]

psp  v11 code missed ring stop in ring create function(VMR)
while psp v3.1 code had the code. This will cause VM destroy1
fail and psp ring create fail.

For SIOV-VF, ring_stop should not be deleted in ring_create
function.

Signed-off-by: Jack Zhang <Jack.Zhang1@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/psp_v11_0.c | 61 ++++++++++++++------------
 1 file changed, 34 insertions(+), 27 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/psp_v11_0.c b/drivers/gpu/drm/amd/amdgpu/psp_v11_0.c
index 10166104b8a39..d483684db95b7 100644
--- a/drivers/gpu/drm/amd/amdgpu/psp_v11_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/psp_v11_0.c
@@ -398,6 +398,34 @@ static bool psp_v11_0_support_vmr_ring(struct psp_context *psp)
 	return false;
 }
 
+static int psp_v11_0_ring_stop(struct psp_context *psp,
+			      enum psp_ring_type ring_type)
+{
+	int ret = 0;
+	struct amdgpu_device *adev = psp->adev;
+
+	/* Write the ring destroy command*/
+	if (psp_v11_0_support_vmr_ring(psp))
+		WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_101,
+				     GFX_CTRL_CMD_ID_DESTROY_GPCOM_RING);
+	else
+		WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_64,
+				     GFX_CTRL_CMD_ID_DESTROY_RINGS);
+
+	/* there might be handshake issue with hardware which needs delay */
+	mdelay(20);
+
+	/* Wait for response flag (bit 31) */
+	if (psp_v11_0_support_vmr_ring(psp))
+		ret = psp_wait_for(psp, SOC15_REG_OFFSET(MP0, 0, mmMP0_SMN_C2PMSG_101),
+				   0x80000000, 0x80000000, false);
+	else
+		ret = psp_wait_for(psp, SOC15_REG_OFFSET(MP0, 0, mmMP0_SMN_C2PMSG_64),
+				   0x80000000, 0x80000000, false);
+
+	return ret;
+}
+
 static int psp_v11_0_ring_create(struct psp_context *psp,
 				enum psp_ring_type ring_type)
 {
@@ -407,6 +435,12 @@ static int psp_v11_0_ring_create(struct psp_context *psp,
 	struct amdgpu_device *adev = psp->adev;
 
 	if (psp_v11_0_support_vmr_ring(psp)) {
+		ret = psp_v11_0_ring_stop(psp, ring_type);
+		if (ret) {
+			DRM_ERROR("psp_v11_0_ring_stop_sriov failed!\n");
+			return ret;
+		}
+
 		/* Write low address of the ring to C2PMSG_102 */
 		psp_ring_reg = lower_32_bits(ring->ring_mem_mc_addr);
 		WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_102, psp_ring_reg);
@@ -451,33 +485,6 @@ static int psp_v11_0_ring_create(struct psp_context *psp,
 	return ret;
 }
 
-static int psp_v11_0_ring_stop(struct psp_context *psp,
-			      enum psp_ring_type ring_type)
-{
-	int ret = 0;
-	struct amdgpu_device *adev = psp->adev;
-
-	/* Write the ring destroy command*/
-	if (psp_v11_0_support_vmr_ring(psp))
-		WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_101,
-				     GFX_CTRL_CMD_ID_DESTROY_GPCOM_RING);
-	else
-		WREG32_SOC15(MP0, 0, mmMP0_SMN_C2PMSG_64,
-				     GFX_CTRL_CMD_ID_DESTROY_RINGS);
-
-	/* there might be handshake issue with hardware which needs delay */
-	mdelay(20);
-
-	/* Wait for response flag (bit 31) */
-	if (psp_v11_0_support_vmr_ring(psp))
-		ret = psp_wait_for(psp, SOC15_REG_OFFSET(MP0, 0, mmMP0_SMN_C2PMSG_101),
-				   0x80000000, 0x80000000, false);
-	else
-		ret = psp_wait_for(psp, SOC15_REG_OFFSET(MP0, 0, mmMP0_SMN_C2PMSG_64),
-				   0x80000000, 0x80000000, false);
-
-	return ret;
-}
 
 static int psp_v11_0_ring_destroy(struct psp_context *psp,
 				 enum psp_ring_type ring_type)
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.4 014/350] drm/amdgpu: grab the id mgr lock while accessing passid_mapping

[Sasha Levin]

From: Christian König <christian.koenig@amd.com>

[ Upstream commit 6817bf283b2b851095825ec7f0e9f10398e09125 ]

Need to make sure that we actually dropping the right fence.
Could be done with RCU as well, but to complicated for a fix.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
index 5251352f59228..7700c32dd7430 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
@@ -1034,10 +1034,8 @@ int amdgpu_vm_flush(struct amdgpu_ring *ring, struct amdgpu_job *job, bool need_
 		id->oa_base != job->oa_base ||
 		id->oa_size != job->oa_size);
 	bool vm_flush_needed = job->vm_needs_flush;
-	bool pasid_mapping_needed = id->pasid != job->pasid ||
-		!id->pasid_mapping ||
-		!dma_fence_is_signaled(id->pasid_mapping);
 	struct dma_fence *fence = NULL;
+	bool pasid_mapping_needed;
 	unsigned patch_offset = 0;
 	int r;
 
@@ -1047,6 +1045,12 @@ int amdgpu_vm_flush(struct amdgpu_ring *ring, struct amdgpu_job *job, bool need_
 		pasid_mapping_needed = true;
 	}
 
+	mutex_lock(&id_mgr->lock);
+	if (id->pasid != job->pasid || !id->pasid_mapping ||
+	    !dma_fence_is_signaled(id->pasid_mapping))
+		pasid_mapping_needed = true;
+	mutex_unlock(&id_mgr->lock);
+
 	gds_switch_needed &= !!ring->funcs->emit_gds_switch;
 	vm_flush_needed &= !!ring->funcs->emit_vm_flush  &&
 			job->vm_pd_addr != AMDGPU_BO_INVALID_OFFSET;
@@ -1086,9 +1090,11 @@ int amdgpu_vm_flush(struct amdgpu_ring *ring, struct amdgpu_job *job, bool need_
 	}
 
 	if (pasid_mapping_needed) {
+		mutex_lock(&id_mgr->lock);
 		id->pasid = job->pasid;
 		dma_fence_put(id->pasid_mapping);
 		id->pasid_mapping = dma_fence_get(fence);
+		mutex_unlock(&id_mgr->lock);
 	}
 	dma_fence_put(fence);
 
-- 
2.20.1

[PATCH AUTOSEL 5.4 014/350] drm/amdgpu: grab the id mgr lock while accessing passid_mapping

[Sasha Levin]

From: Christian König <christian.koenig@amd.com>

[ Upstream commit 6817bf283b2b851095825ec7f0e9f10398e09125 ]

Need to make sure that we actually dropping the right fence.
Could be done with RCU as well, but to complicated for a fix.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
index 5251352f59228..7700c32dd7430 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
@@ -1034,10 +1034,8 @@ int amdgpu_vm_flush(struct amdgpu_ring *ring, struct amdgpu_job *job, bool need_
 		id->oa_base != job->oa_base ||
 		id->oa_size != job->oa_size);
 	bool vm_flush_needed = job->vm_needs_flush;
-	bool pasid_mapping_needed = id->pasid != job->pasid ||
-		!id->pasid_mapping ||
-		!dma_fence_is_signaled(id->pasid_mapping);
 	struct dma_fence *fence = NULL;
+	bool pasid_mapping_needed;
 	unsigned patch_offset = 0;
 	int r;
 
@@ -1047,6 +1045,12 @@ int amdgpu_vm_flush(struct amdgpu_ring *ring, struct amdgpu_job *job, bool need_
 		pasid_mapping_needed = true;
 	}
 
+	mutex_lock(&id_mgr->lock);
+	if (id->pasid != job->pasid || !id->pasid_mapping ||
+	    !dma_fence_is_signaled(id->pasid_mapping))
+		pasid_mapping_needed = true;
+	mutex_unlock(&id_mgr->lock);
+
 	gds_switch_needed &= !!ring->funcs->emit_gds_switch;
 	vm_flush_needed &= !!ring->funcs->emit_vm_flush  &&
 			job->vm_pd_addr != AMDGPU_BO_INVALID_OFFSET;
@@ -1086,9 +1090,11 @@ int amdgpu_vm_flush(struct amdgpu_ring *ring, struct amdgpu_job *job, bool need_
 	}
 
 	if (pasid_mapping_needed) {
+		mutex_lock(&id_mgr->lock);
 		id->pasid = job->pasid;
 		dma_fence_put(id->pasid_mapping);
 		id->pasid_mapping = dma_fence_get(fence);
+		mutex_unlock(&id_mgr->lock);
 	}
 	dma_fence_put(fence);
 
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.4 015/350] drm/ttm: return -EBUSY on pipelining with no_gpu_wait (v2)

[Sasha Levin]

From: Christian König <christian.koenig@amd.com>

[ Upstream commit 3084cf46cf8110826a42de8c8ef30e8fa48974c2 ]

Setting the no_gpu_wait flag means that the allocate BO must be available
immediately and we can't wait for any GPU operation to finish.

v2: squash in mem leak fix, rebase

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/ttm/ttm_bo.c | 44 +++++++++++++++++++++---------------
 1 file changed, 26 insertions(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index 98819462f025f..f078036998092 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -926,7 +926,8 @@ EXPORT_SYMBOL(ttm_bo_mem_put);
  */
 static int ttm_bo_add_move_fence(struct ttm_buffer_object *bo,
 				 struct ttm_mem_type_manager *man,
-				 struct ttm_mem_reg *mem)
+				 struct ttm_mem_reg *mem,
+				 bool no_wait_gpu)
 {
 	struct dma_fence *fence;
 	int ret;
@@ -935,19 +936,22 @@ static int ttm_bo_add_move_fence(struct ttm_buffer_object *bo,
 	fence = dma_fence_get(man->move);
 	spin_unlock(&man->move_lock);
 
-	if (fence) {
-		dma_resv_add_shared_fence(bo->base.resv, fence);
+	if (!fence)
+		return 0;
 
-		ret = dma_resv_reserve_shared(bo->base.resv, 1);
-		if (unlikely(ret)) {
-			dma_fence_put(fence);
-			return ret;
-		}
+	if (no_wait_gpu)
+		return -EBUSY;
+
+	dma_resv_add_shared_fence(bo->base.resv, fence);
 
-		dma_fence_put(bo->moving);
-		bo->moving = fence;
+	ret = dma_resv_reserve_shared(bo->base.resv, 1);
+	if (unlikely(ret)) {
+		dma_fence_put(fence);
+		return ret;
 	}
 
+	dma_fence_put(bo->moving);
+	bo->moving = fence;
 	return 0;
 }
 
@@ -978,7 +982,7 @@ static int ttm_bo_mem_force_space(struct ttm_buffer_object *bo,
 			return ret;
 	} while (1);
 
-	return ttm_bo_add_move_fence(bo, man, mem);
+	return ttm_bo_add_move_fence(bo, man, mem, ctx->no_wait_gpu);
 }
 
 static uint32_t ttm_bo_select_caching(struct ttm_mem_type_manager *man,
@@ -1120,14 +1124,18 @@ int ttm_bo_mem_space(struct ttm_buffer_object *bo,
 		if (unlikely(ret))
 			goto error;
 
-		if (mem->mm_node) {
-			ret = ttm_bo_add_move_fence(bo, man, mem);
-			if (unlikely(ret)) {
-				(*man->func->put_node)(man, mem);
-				goto error;
-			}
-			return 0;
+		if (!mem->mm_node)
+			continue;
+
+		ret = ttm_bo_add_move_fence(bo, man, mem, ctx->no_wait_gpu);
+		if (unlikely(ret)) {
+			(*man->func->put_node)(man, mem);
+			if (ret == -EBUSY)
+				continue;
+
+			goto error;
 		}
+		return 0;
 	}
 
 	for (i = 0; i < placement->num_busy_placement; ++i) {
-- 
2.20.1

[PATCH AUTOSEL 5.4 015/350] drm/ttm: return -EBUSY on pipelining with no_gpu_wait (v2)

[Sasha Levin]

From: Christian König <christian.koenig@amd.com>

[ Upstream commit 3084cf46cf8110826a42de8c8ef30e8fa48974c2 ]

Setting the no_gpu_wait flag means that the allocate BO must be available
immediately and we can't wait for any GPU operation to finish.

v2: squash in mem leak fix, rebase

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/ttm/ttm_bo.c | 44 +++++++++++++++++++++---------------
 1 file changed, 26 insertions(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index 98819462f025f..f078036998092 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -926,7 +926,8 @@ EXPORT_SYMBOL(ttm_bo_mem_put);
  */
 static int ttm_bo_add_move_fence(struct ttm_buffer_object *bo,
 				 struct ttm_mem_type_manager *man,
-				 struct ttm_mem_reg *mem)
+				 struct ttm_mem_reg *mem,
+				 bool no_wait_gpu)
 {
 	struct dma_fence *fence;
 	int ret;
@@ -935,19 +936,22 @@ static int ttm_bo_add_move_fence(struct ttm_buffer_object *bo,
 	fence = dma_fence_get(man->move);
 	spin_unlock(&man->move_lock);
 
-	if (fence) {
-		dma_resv_add_shared_fence(bo->base.resv, fence);
+	if (!fence)
+		return 0;
 
-		ret = dma_resv_reserve_shared(bo->base.resv, 1);
-		if (unlikely(ret)) {
-			dma_fence_put(fence);
-			return ret;
-		}
+	if (no_wait_gpu)
+		return -EBUSY;
+
+	dma_resv_add_shared_fence(bo->base.resv, fence);
 
-		dma_fence_put(bo->moving);
-		bo->moving = fence;
+	ret = dma_resv_reserve_shared(bo->base.resv, 1);
+	if (unlikely(ret)) {
+		dma_fence_put(fence);
+		return ret;
 	}
 
+	dma_fence_put(bo->moving);
+	bo->moving = fence;
 	return 0;
 }
 
@@ -978,7 +982,7 @@ static int ttm_bo_mem_force_space(struct ttm_buffer_object *bo,
 			return ret;
 	} while (1);
 
-	return ttm_bo_add_move_fence(bo, man, mem);
+	return ttm_bo_add_move_fence(bo, man, mem, ctx->no_wait_gpu);
 }
 
 static uint32_t ttm_bo_select_caching(struct ttm_mem_type_manager *man,
@@ -1120,14 +1124,18 @@ int ttm_bo_mem_space(struct ttm_buffer_object *bo,
 		if (unlikely(ret))
 			goto error;
 
-		if (mem->mm_node) {
-			ret = ttm_bo_add_move_fence(bo, man, mem);
-			if (unlikely(ret)) {
-				(*man->func->put_node)(man, mem);
-				goto error;
-			}
-			return 0;
+		if (!mem->mm_node)
+			continue;
+
+		ret = ttm_bo_add_move_fence(bo, man, mem, ctx->no_wait_gpu);
+		if (unlikely(ret)) {
+			(*man->func->put_node)(man, mem);
+			if (ret == -EBUSY)
+				continue;
+
+			goto error;
 		}
+		return 0;
 	}
 
 	for (i = 0; i < placement->num_busy_placement; ++i) {
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.4 016/350] drm/amd/display: Rebuild mapped resources after pipe split

[Sasha Levin]

From: Mikita Lipski <mikita.lipski@amd.com>

[ Upstream commit 387596ef2859c37d564ce15abddbc9063a132e2c ]

[why]
The issue is specific for linux, as on timings such as 8K@60
or 4K@144 DSC should be working in combination with ODM Combine
in order to ensure that we can run those timings. The validation
for those timings was passing, but when pipe split was happening
second pipe wasn't being programmed.

[how]
Rebuild mapped resources if we split stream for ODM.

Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
index 3980c7b782599..ebe67c34dabf6 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
@@ -2474,6 +2474,7 @@ bool dcn20_fast_validate_bw(
 							&context->res_ctx, dc->res_pool,
 							pipe, hsplit_pipe))
 						goto validate_fail;
+					dcn20_build_mapped_resource(dc, context, pipe->stream);
 				} else
 					dcn20_split_stream_for_mpc(
 						&context->res_ctx, dc->res_pool,
-- 
2.20.1

[PATCH AUTOSEL 5.4 016/350] drm/amd/display: Rebuild mapped resources after pipe split

[Sasha Levin]

From: Mikita Lipski <mikita.lipski@amd.com>

[ Upstream commit 387596ef2859c37d564ce15abddbc9063a132e2c ]

[why]
The issue is specific for linux, as on timings such as 8K@60
or 4K@144 DSC should be working in combination with ODM Combine
in order to ensure that we can run those timings. The validation
for those timings was passing, but when pipe split was happening
second pipe wasn't being programmed.

[how]
Rebuild mapped resources if we split stream for ODM.

Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
index 3980c7b782599..ebe67c34dabf6 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
@@ -2474,6 +2474,7 @@ bool dcn20_fast_validate_bw(
 							&context->res_ctx, dc->res_pool,
 							pipe, hsplit_pipe))
 						goto validate_fail;
+					dcn20_build_mapped_resource(dc, context, pipe->stream);
 				} else
 					dcn20_split_stream_for_mpc(
 						&context->res_ctx, dc->res_pool,
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.4 017/350] ath10k: add cleanup in ath10k_sta_state()

[Sasha Levin]

From: Wenwen Wang <wenwen@cs.uga.edu>

[ Upstream commit 334f5b61a6f29834e881923b98d1e27e5ce9620d ]

If 'sta->tdls' is false, no cleanup is executed, leading to memory/resource
leaks, e.g., 'arsta->tx_stats'. To fix this issue, perform cleanup before
go to the 'exit' label.

Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/mac.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index a6d21856b7e7d..40889b79fc70d 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -6549,8 +6549,12 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
 
 		spin_unlock_bh(&ar->data_lock);
 
-		if (!sta->tdls)
+		if (!sta->tdls) {
+			ath10k_peer_delete(ar, arvif->vdev_id, sta->addr);
+			ath10k_mac_dec_num_stations(arvif, sta);
+			kfree(arsta->tx_stats);
 			goto exit;
+		}
 
 		ret = ath10k_wmi_update_fw_tdls_state(ar, arvif->vdev_id,
 						      WMI_TDLS_ENABLE_ACTIVE);
-- 
2.20.1

[PATCH AUTOSEL 5.4 017/350] ath10k: add cleanup in ath10k_sta_state()

[Sasha Levin]

From: Wenwen Wang <wenwen@cs.uga.edu>

[ Upstream commit 334f5b61a6f29834e881923b98d1e27e5ce9620d ]

If 'sta->tdls' is false, no cleanup is executed, leading to memory/resource
leaks, e.g., 'arsta->tx_stats'. To fix this issue, perform cleanup before
go to the 'exit' label.

Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/mac.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index a6d21856b7e7d..40889b79fc70d 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -6549,8 +6549,12 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
 
 		spin_unlock_bh(&ar->data_lock);
 
-		if (!sta->tdls)
+		if (!sta->tdls) {
+			ath10k_peer_delete(ar, arvif->vdev_id, sta->addr);
+			ath10k_mac_dec_num_stations(arvif, sta);
+			kfree(arsta->tx_stats);
 			goto exit;
+		}
 
 		ret = ath10k_wmi_update_fw_tdls_state(ar, arvif->vdev_id,
 						      WMI_TDLS_ENABLE_ACTIVE);
-- 
2.20.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH AUTOSEL 5.4 018/350] drm/amd/display: Handle virtual signal type in disable_link()

[Sasha Levin]

From: Martin Tsai <martin.tsai@amd.com>

[ Upstream commit 616f5b65f1c02d3d6ae370644670d14c57de2fd8 ]

[Why]
The new implementation changed the behavior to allow process setMode
to DAL when DAL returns empty mode query for unplugged display.
This will trigger additional disable_link().
When unplug HDMI from MST dock, driver will update stream->signal to
"Virtual". disable_link() will call disable_output() if the signal type
is not DP and induce other displays on MST dock show black screen.

[How]
Don't need to process disable_output() if the signal type is virtual.

Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index ca20b150afcc2..de1b61595ffbf 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -2169,8 +2169,10 @@ static void disable_link(struct dc_link *link, enum signal_type signal)
 			dp_set_fec_ready(link, false);
 		}
 #endif
-	} else
-		link->link_enc->funcs->disable_output(link->link_enc, signal);
+	} else {
+		if (signal != SIGNAL_TYPE_VIRTUAL)
+			link->link_enc->funcs->disable_output(link->link_enc, signal);
+	}
 
 	if (signal == SIGNAL_TYPE_DISPLAY_PORT_MST) {
 		/* MST disable link only when no stream use the link */
-- 
2.20.1

[PATCH AUTOSEL 5.4 018/350] drm/amd/display: Handle virtual signal type in disable_link()

[Sasha Levin]

From: Martin Tsai <martin.tsai@amd.com>

[ Upstream commit 616f5b65f1c02d3d6ae370644670d14c57de2fd8 ]

[Why]
The new implementation changed the behavior to allow process setMode
to DAL when DAL returns empty mode query for unplugged display.
This will trigger additional disable_link().
When unplug HDMI from MST dock, driver will update stream->signal to
"Virtual". disable_link() will call disable_output() if the signal type
is not DP and induce other displays on MST dock show black screen.

[How]
Don't need to process disable_output() if the signal type is virtual.

Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index ca20b150afcc2..de1b61595ffbf 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -2169,8 +2169,10 @@ static void disable_link(struct dc_link *link, enum signal_type signal)
 			dp_set_fec_ready(link, false);
 		}
 #endif
-	} else
-		link->link_enc->funcs->disable_output(link->link_enc, signal);
+	} else {
+		if (signal != SIGNAL_TYPE_VIRTUAL)
+			link->link_enc->funcs->disable_output(link->link_enc, signal);
+	}
 
 	if (signal == SIGNAL_TYPE_DISPLAY_PORT_MST) {
 		/* MST disable link only when no stream use the link */
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.4 019/350] iio: tcs3414: fix iio_triggered_buffer_{pre,post}enable positions

[Sasha Levin]

From: Alexandru Ardelean <alexandru.ardelean@analog.com>

[ Upstream commit 0fe2f2b789190661df24bb8bf62294145729a1fe ]

The iio_triggered_buffer_{predisable,postenable} functions attach/detach
the poll functions.

For the predisable hook, the disable code should occur before detaching
the poll func, and for the postenable hook, the poll func should be
attached before the enable code.

The driver was slightly reworked. The preenable hook was moved to the
postenable, to add some symmetry to the postenable/predisable part.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/iio/light/tcs3414.c | 30 ++++++++++++++++++++----------
 1 file changed, 20 insertions(+), 10 deletions(-)

diff --git a/drivers/iio/light/tcs3414.c b/drivers/iio/light/tcs3414.c
index 7c0291c5fe76e..b542e5619ead8 100644
--- a/drivers/iio/light/tcs3414.c
+++ b/drivers/iio/light/tcs3414.c
@@ -240,32 +240,42 @@ static const struct iio_info tcs3414_info = {
 	.attrs = &tcs3414_attribute_group,
 };
 
-static int tcs3414_buffer_preenable(struct iio_dev *indio_dev)
+static int tcs3414_buffer_postenable(struct iio_dev *indio_dev)
 {
 	struct tcs3414_data *data = iio_priv(indio_dev);
+	int ret;
+
+	ret = iio_triggered_buffer_postenable(indio_dev);
+	if (ret)
+		return ret;
 
 	data->control |= TCS3414_CONTROL_ADC_EN;
-	return i2c_smbus_write_byte_data(data->client, TCS3414_CONTROL,
+	ret = i2c_smbus_write_byte_data(data->client, TCS3414_CONTROL,
 		data->control);
+	if (ret)
+		iio_triggered_buffer_predisable(indio_dev);
+
+	return ret;
 }
 
 static int tcs3414_buffer_predisable(struct iio_dev *indio_dev)
 {
 	struct tcs3414_data *data = iio_priv(indio_dev);
-	int ret;
-
-	ret = iio_triggered_buffer_predisable(indio_dev);
-	if (ret < 0)
-		return ret;
+	int ret, ret2;
 
 	data->control &= ~TCS3414_CONTROL_ADC_EN;
-	return i2c_smbus_write_byte_data(data->client, TCS3414_CONTROL,
+	ret = i2c_smbus_write_byte_data(data->client, TCS3414_CONTROL,
 		data->control);
+
+	ret2 = iio_triggered_buffer_predisable(indio_dev);
+	if (!ret)
+		ret = ret2;
+
+	return ret;
 }
 
 static const struct iio_buffer_setup_ops tcs3414_buffer_setup_ops = {
-	.preenable = tcs3414_buffer_preenable,
-	.postenable = &iio_triggered_buffer_postenable,
+	.postenable = tcs3414_buffer_postenable,
 	.predisable = tcs3414_buffer_predisable,
 };
 
-- 
2.20.1

Re: [PATCH AUTOSEL 5.4 019/350] iio: tcs3414: fix iio_triggered_buffer_{pre,post}enable positions

[Jonathan Cameron]

On Tue, 10 Dec 2019 15:58:31 -0500
Sasha Levin <sashal@kernel.org> wrote:

> From: Alexandru Ardelean <alexandru.ardelean@analog.com>
> 
> [ Upstream commit 0fe2f2b789190661df24bb8bf62294145729a1fe ]
> 
> The iio_triggered_buffer_{predisable,postenable} functions attach/detach
> the poll functions.
> 
> For the predisable hook, the disable code should occur before detaching
> the poll func, and for the postenable hook, the poll func should be
> attached before the enable code.
> 
> The driver was slightly reworked. The preenable hook was moved to the
> postenable, to add some symmetry to the postenable/predisable part.
> 
> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
I doubt this did any harm, but wouldn't consider it stable material normally.

This is part of a general rework going on to allow some core refactoring.

I should have added a note to this one like some related patches that it
is a logical fix, but we don't have an actual known bug afaik.

Sorry about that.

Jonathan

> ---
>  drivers/iio/light/tcs3414.c | 30 ++++++++++++++++++++----------
>  1 file changed, 20 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/iio/light/tcs3414.c b/drivers/iio/light/tcs3414.c
> index 7c0291c5fe76e..b542e5619ead8 100644
> --- a/drivers/iio/light/tcs3414.c
> +++ b/drivers/iio/light/tcs3414.c
> @@ -240,32 +240,42 @@ static const struct iio_info tcs3414_info = {
>  	.attrs = &tcs3414_attribute_group,
>  };
>  
> -static int tcs3414_buffer_preenable(struct iio_dev *indio_dev)
> +static int tcs3414_buffer_postenable(struct iio_dev *indio_dev)
>  {
>  	struct tcs3414_data *data = iio_priv(indio_dev);
> +	int ret;
> +
> +	ret = iio_triggered_buffer_postenable(indio_dev);
> +	if (ret)
> +		return ret;
>  
>  	data->control |= TCS3414_CONTROL_ADC_EN;
> -	return i2c_smbus_write_byte_data(data->client, TCS3414_CONTROL,
> +	ret = i2c_smbus_write_byte_data(data->client, TCS3414_CONTROL,
>  		data->control);
> +	if (ret)
> +		iio_triggered_buffer_predisable(indio_dev);
> +
> +	return ret;
>  }
>  
>  static int tcs3414_buffer_predisable(struct iio_dev *indio_dev)
>  {
>  	struct tcs3414_data *data = iio_priv(indio_dev);
> -	int ret;
> -
> -	ret = iio_triggered_buffer_predisable(indio_dev);
> -	if (ret < 0)
> -		return ret;
> +	int ret, ret2;
>  
>  	data->control &= ~TCS3414_CONTROL_ADC_EN;
> -	return i2c_smbus_write_byte_data(data->client, TCS3414_CONTROL,
> +	ret = i2c_smbus_write_byte_data(data->client, TCS3414_CONTROL,
>  		data->control);
> +
> +	ret2 = iio_triggered_buffer_predisable(indio_dev);
> +	if (!ret)
> +		ret = ret2;
> +
> +	return ret;
>  }
>  
>  static const struct iio_buffer_setup_ops tcs3414_buffer_setup_ops = {
> -	.preenable = tcs3414_buffer_preenable,
> -	.postenable = &iio_triggered_buffer_postenable,
> +	.postenable = tcs3414_buffer_postenable,
>  	.predisable = tcs3414_buffer_predisable,
>  };
>  

Re: [PATCH AUTOSEL 5.4 019/350] iio: tcs3414: fix iio_triggered_buffer_{pre,post}enable positions

[Sasha Levin]

On Sun, Dec 15, 2019 at 03:52:03PM +0000, Jonathan Cameron wrote:
>On Tue, 10 Dec 2019 15:58:31 -0500
>Sasha Levin <sashal@kernel.org> wrote:
>
>> From: Alexandru Ardelean <alexandru.ardelean@analog.com>
>>
>> [ Upstream commit 0fe2f2b789190661df24bb8bf62294145729a1fe ]
>>
>> The iio_triggered_buffer_{predisable,postenable} functions attach/detach
>> the poll functions.
>>
>> For the predisable hook, the disable code should occur before detaching
>> the poll func, and for the postenable hook, the poll func should be
>> attached before the enable code.
>>
>> The driver was slightly reworked. The preenable hook was moved to the
>> postenable, to add some symmetry to the postenable/predisable part.
>>
>> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
>> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>I doubt this did any harm, but wouldn't consider it stable material normally.
>
>This is part of a general rework going on to allow some core refactoring.
>
>I should have added a note to this one like some related patches that it
>is a logical fix, but we don't have an actual known bug afaik.

I'll drop it from everywhere, thanks!

-- 
Thanks,
Sasha

[PATCH AUTOSEL 5.4 020/350] ath10k: Check if station exists before forwarding tx airtime report

[Sasha Levin]

From: Hauke Mehrtens <hauke@hauke-m.de>

[ Upstream commit b10f32672946ad638a430cc4289029b7acf8e979 ]

It looks like the FW on QCA9984 already reports the tx airtimes before
the station is added to the peer entry. The peer entry is created in
ath10k_peer_map_event() just with the vdev_id and the ethaddr, but
not with a station entry, this is added later in ath10k_peer_create() in
callbacks from mac80211.

When there is no sta added to the peer entry, this function fails
because it calls ieee80211_sta_register_airtime() with NULL.

This was reported in OpenWrt some time ago:
https://bugs.openwrt.org/index.php?do=details&task_id=2414

This commit should fix this crash:
[   75.991714] Unable to handle kernel paging request at virtual address fffff9e8
[   75.991756] pgd = c0204000
[   75.997955] [fffff9e8] *pgd=5fdfd861, *pte=00000000, *ppte=00000000
[   76.000537] Internal error: Oops: 37 [#1] SMP ARM
[   76.006686] Modules linked in: pppoe ppp_async ath10k_pci ath10k_core ath pptp pppox ppp_mppe ppp_generic mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_esp xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY usbserial slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_netlink iptable_raw iptable_mangle iptable_filter ipt_ah ipt_ECN ip_tables crc_ccitt compat chaoskey fuse sch_cake sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32
[   76.059974]  cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6t_NPT ip6t_MASQUERADE nf_nat_masquerade_ipv6 nf_nat nf_conntrack nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 msdos ip_gre gre ifb sit tunnel4 ip_tunnel tun vfat fat hfsplus cifs nls_utf8 nls_iso8859_15 nls_iso8859_1 nls_cp850 nls_cp437 nls_cp1250 sha1_generic md5 md4
[   76.130634]  usb_storage leds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_of_simple ohci_platform ohci_hcd phy_qcom_dwc3 ahci ehci_platform sd_mod ahci_platform libahci_platform libahci libata scsi_mod ehci_hcd gpio_button_hotplug ext4 mbcache jbd2 exfat crc32c_generic
[   76.154772] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.132 #0
[   76.177001] Hardware name: Generic DT based system
[   76.182990] task: c0b06d80 task.stack: c0b00000
[   76.187832] PC is at ieee80211_sta_register_airtime+0x24/0x148 [mac80211]
[   76.192211] LR is at ath10k_htt_t2h_msg_handler+0x678/0x10f4 [ath10k_core]
[   76.199052] pc : [<bf75bfac>]    lr : [<bf83e8b0>]    psr: a0000113
[   76.205820] sp : c0b01d54  ip : 00000002  fp : bf869c0c
[   76.211981] r10: 0000003c  r9 : dbdca138  r8 : 00060002
[   76.217192] r7 : 00000000  r6 : dabe1150  r5 : 00000000  r4 : dbdc95c0
[   76.222401] r3 : 00000000  r2 : 00060002  r1 : 00000000  r0 : 00000000
[   76.229003] Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[   76.235509] Control: 10c5787d  Table: 5c94006a  DAC: 00000051
[   76.242716] Process swapper/0 (pid: 0, stack limit = 0xc0b00210)
[   76.248446] Stack: (0xc0b01d54 to 0xc0b02000)
[   76.254532] 1d40:                                              dbdc95c0 00000000 dabe1150
[   76.258808] 1d60: 00000001 dabe1150 dbdca138 0000003c bf869c0c bf83e8b0 00000002 c0314b10
[   76.266969] 1d80: dbdc9c70 00000001 00000001 dabe114c 00010000 00000000 dbdcd724 bf88f3d8
[   76.275126] 1da0: c0310d28 db393c00 dbdc95c0 00000000 c0b01dd0 c07fb4c4 dbdcd724 00000001
[   76.283286] 1dc0: 00000022 bf88b09c db393c00 00000022 c0b01dd0 c0b01dd0 00000000 dbdcc5c0
[   76.291445] 1de0: bf88f04c dbdcd654 dbdcd71c dbdc95c0 00000014 dbdcd724 dbdcc5c0 00000005
[   76.299605] 1e00: 0004b400 bf85c360 00000000 bf87101c c0b01e24 00000006 00000000 dbdc95c0
[   76.307764] 1e20: 00000001 00000040 0000012c c0b01e80 1cf51000 bf85c448 dbdcd440 dbdc95c0
[   76.315925] 1e40: dbdca440 ffffa880 00000040 bf88cb68 dbdcd440 00000001 00000040 ffffa880
[   76.324084] 1e60: c0b02d00 c06d72e0 dd990080 c0a3f080 c0b255dc c0b047e4 c090afac c090e80c
[   76.332244] 1e80: c0b01e80 c0b01e80 c0b01e88 c0b01e88 dd4cc200 00000000 00000003 c0b0208c
[   76.340405] 1ea0: c0b02080 40000003 ffffe000 00000100 c0b02080 c03015c8 00000000 00000001
[   76.348564] 1ec0: dd408000 c0a38210 c0b2c7c0 0000000a ffffa880 c0b02d00 c07fb764 00200102
[   76.356723] 1ee0: dd4cc268 c0a3e414 00000000 00000000 00000001 dd408000 de803000 00000000
[   76.364883] 1f00: 00000000 c03247cc c0a3e414 c0368f1c c0b03f60 c0b153cc de80200c de802000
[   76.373042] 1f20: c0b01f48 c0301488 c0308630 60000013 ffffffff c0b01f7c 00000000 c0b00000
[   76.381204] 1f40: 00000000 c030c08c 00000001 00000000 00000000 c0315180 ffffe000 c0b03cc0
[   76.389363] 1f60: c0b03c70 00000000 00000000 c0a2da28 00000000 00000000 c0b01f90 c0b01f98
[   76.397522] 1f80: c030862c c0308630 60000013 ffffffff 00000051 00000000 ffffe000 c035dd18
[   76.405681] 1fa0: 000000bf c0b03c40 00000000 c0b2c000 dddfce80 c035e060 c0b2c040 c0a00cf4
[   76.413842] 1fc0: ffffffff ffffffff 00000000 c0a0067c c0a2da28 00000000 00000000 c0b2c1d4
[   76.422001] 1fe0: c0b03c5c c0a2da24 c0b07ee0 4220406a 512f04d0 4220807c 00000000 00000000
[   76.430335] [<bf75bfac>] (ieee80211_sta_register_airtime [mac80211]) from [<00000002>] (0x2)
[   76.438314] Code: e1cd81f0 e1a08002 e1cda1f8 e58de020 (e5102618)
[   76.446965] ---[ end trace 227a38ade964d642 ]---

Fixes: bb31b7cb106c ("ath10k: report tx airtime provided by fw")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/htt_rx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 53f1095de8ffd..9f0e7b4943ec6 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -2726,7 +2726,7 @@ static void ath10k_htt_rx_tx_compl_ind(struct ath10k *ar,
 		spin_lock_bh(&ar->data_lock);
 
 		peer = ath10k_peer_find_by_id(ar, peer_id);
-		if (!peer) {
+		if (!peer || !peer->sta) {
 			spin_unlock_bh(&ar->data_lock);
 			rcu_read_unlock();
 			continue;
-- 
2.20.1

[PATCH AUTOSEL 5.4 020/350] ath10k: Check if station exists before forwarding tx airtime report

[Sasha Levin]

From: Hauke Mehrtens <hauke@hauke-m.de>

[ Upstream commit b10f32672946ad638a430cc4289029b7acf8e979 ]

It looks like the FW on QCA9984 already reports the tx airtimes before
the station is added to the peer entry. The peer entry is created in
ath10k_peer_map_event() just with the vdev_id and the ethaddr, but
not with a station entry, this is added later in ath10k_peer_create() in
callbacks from mac80211.

When there is no sta added to the peer entry, this function fails
because it calls ieee80211_sta_register_airtime() with NULL.

This was reported in OpenWrt some time ago:
https://bugs.openwrt.org/index.php?do=details&task_id=2414

This commit should fix this crash:
[   75.991714] Unable to handle kernel paging request at virtual address fffff9e8
[   75.991756] pgd = c0204000
[   75.997955] [fffff9e8] *pgd=5fdfd861, *pte=00000000, *ppte=00000000
[   76.000537] Internal error: Oops: 37 [#1] SMP ARM
[   76.006686] Modules linked in: pppoe ppp_async ath10k_pci ath10k_core ath pptp pppox ppp_mppe ppp_generic mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_tcpmss xt_statistic xt_state xt_recent xt_nat xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_helper xt_esp xt_ecn xt_dscp xt_conntrack xt_connmark xt_connlimit xt_connbytes xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_HL xt_FLOWOFFLOAD xt_DSCP xt_CT xt_CLASSIFY usbserial slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_log_ipv4 nf_flow_table_hw nf_flow_table nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack_netlink iptable_raw iptable_mangle iptable_filter ipt_ah ipt_ECN ip_tables crc_ccitt compat chaoskey fuse sch_cake sch_tbf sch_ingress sch_htb sch_hfsc em_u32 cls_u32
[   76.059974]  cls_tcindex cls_route cls_matchall cls_fw cls_flow cls_basic act_skbedit act_mirred ledtrig_usbport xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set nfnetlink ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6t_NPT ip6t_MASQUERADE nf_nat_masquerade_ipv6 nf_nat nf_conntrack nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 msdos ip_gre gre ifb sit tunnel4 ip_tunnel tun vfat fat hfsplus cifs nls_utf8 nls_iso8859_15 nls_iso8859_1 nls_cp850 nls_cp437 nls_cp1250 sha1_generic md5 md4
[   76.130634]  usb_storage leds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_of_simple ohci_platform ohci_hcd phy_qcom_dwc3 ahci ehci_platform sd_mod ahci_platform libahci_platform libahci libata scsi_mod ehci_hcd gpio_button_hotplug ext4 mbcache jbd2 exfat crc32c_generic
[   76.154772] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.132 #0
[   76.177001] Hardware name: Generic DT based system
[   76.182990] task: c0b06d80 task.stack: c0b00000
[   76.187832] PC is at ieee80211_sta_register_airtime+0x24/0x148 [mac80211]
[   76.192211] LR is at ath10k_htt_t2h_msg_handler+0x678/0x10f4 [ath10k_core]
[   76.199052] pc : [<bf75bfac>]    lr : [<bf83e8b0>]    psr: a0000113
[   76.205820] sp : c0b01d54  ip : 00000002  fp : bf869c0c
[   76.211981] r10: 0000003c  r9 : dbdca138  r8 : 00060002
[   76.217192] r7 : 00000000  r6 : dabe1150  r5 : 00000000  r4 : dbdc95c0
[   76.222401] r3 : 00000000  r2 : 00060002  r1 : 00000000  r0 : 00000000
[   76.229003] Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[   76.235509] Control: 10c5787d  Table: 5c94006a  DAC: 00000051
[   76.242716] Process swapper/0 (pid: 0, stack limit = 0xc0b00210)
[   76.248446] Stack: (0xc0b01d54 to 0xc0b02000)
[   76.254532] 1d40:                                              dbdc95c0 00000000 dabe1150
[   76.258808] 1d60: 00000001 dabe1150 dbdca138 0000003c bf869c0c bf83e8b0 00000002 c0314b10
[   76.266969] 1d80: dbdc9c70 00000001 00000001 dabe114c 00010000 00000000 dbdcd724 bf88f3d8
[   76.275126] 1da0: c0310d28 db393c00 dbdc95c0 00000000 c0b01dd0 c07fb4c4 dbdcd724 00000001
[   76.283286] 1dc0: 00000022 bf88b09c db393c00 00000022 c0b01dd0 c0b01dd0 00000000 dbdcc5c0
[   76.291445] 1de0: bf88f04c dbdcd654 dbdcd71c dbdc95c0 00000014 dbdcd724 dbdcc5c0 00000005
[   76.299605] 1e00: 0004b400 bf85c360 00000000 bf87101c c0b01e24 00000006 00000000 dbdc95c0
[   76.307764] 1e20: 00000001 00000040 0000012c c0b01e80 1cf51000 bf85c448 dbdcd440 dbdc95c0
[   76.315925] 1e40: dbdca440 ffffa880 00000040 bf88cb68 dbdcd440 00000001 00000040 ffffa880
[   76.324084] 1e60: c0b02d00 c06d72e0 dd990080 c0a3f080 c0b255dc c0b047e4 c090afac c090e80c
[   76.332244] 1e80: c0b01e80 c0b01e80 c0b01e88 c0b01e88 dd4cc200 00000000 00000003 c0b0208c
[   76.340405] 1ea0: c0b02080 40000003 ffffe000 00000100 c0b02080 c03015c8 00000000 00000001
[   76.348564] 1ec0: dd408000 c0a38210 c0b2c7c0 0000000a ffffa880 c0b02d00 c07fb764 00200102
[   76.356723] 1ee0: dd4cc268 c0a3e414 00000000 00000000 00000001 dd408000 de803000 00000000
[   76.364883] 1f00: 00000000 c03247cc c0a3e414 c0368f1c c0b03f60 c0b153cc de80200c de802000
[   76.373042] 1f20: c0b01f48 c0301488 c0308630 60000013 ffffffff c0b01f7c 00000000 c0b00000
[   76.381204] 1f40: 00000000 c030c08c 00000001 00000000 00000000 c0315180 ffffe000 c0b03cc0
[   76.389363] 1f60: c0b03c70 00000000 00000000 c0a2da28 00000000 00000000 c0b01f90 c0b01f98
[   76.397522] 1f80: c030862c c0308630 60000013 ffffffff 00000051 00000000 ffffe000 c035dd18
[   76.405681] 1fa0: 000000bf c0b03c40 00000000 c0b2c000 dddfce80 c035e060 c0b2c040 c0a00cf4
[   76.413842] 1fc0: ffffffff ffffffff 00000000 c0a0067c c0a2da28 00000000 00000000 c0b2c1d4
[   76.422001] 1fe0: c0b03c5c c0a2da24 c0b07ee0 4220406a 512f04d0 4220807c 00000000 00000000
[   76.430335] [<bf75bfac>] (ieee80211_sta_register_airtime [mac80211]) from [<00000002>] (0x2)
[   76.438314] Code: e1cd81f0 e1a08002 e1cda1f8 e58de020 (e5102618)
[   76.446965] ---[ end trace 227a38ade964d642 ]---

Fixes: bb31b7cb106c ("ath10k: report tx airtime provided by fw")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/htt_rx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 53f1095de8ffd..9f0e7b4943ec6 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -2726,7 +2726,7 @@ static void ath10k_htt_rx_tx_compl_ind(struct ath10k *ar,
 		spin_lock_bh(&ar->data_lock);
 
 		peer = ath10k_peer_find_by_id(ar, peer_id);
-		if (!peer) {
+		if (!peer || !peer->sta) {
 			spin_unlock_bh(&ar->data_lock);
 			rcu_read_unlock();
 			continue;
-- 
2.20.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH AUTOSEL 5.4 021/350] spi: Add call to spi_slave_abort() function when spidev driver is released

[Sasha Levin]

From: Lukasz Majewski <lukma@denx.de>

[ Upstream commit 9f918a728cf86b2757b6a7025e1f46824bfe3155 ]

This change is necessary for spidev devices (e.g. /dev/spidev3.0) working
in the slave mode (like NXP's dspi driver for Vybrid SoC).

When SPI HW works in this mode - the master is responsible for providing
CS and CLK signals. However, when some fault happens - like for example
distortion on SPI lines - the SPI Linux driver needs a chance to recover
from this abnormal situation and prepare itself for next (correct)
transmission.

This change doesn't pose any threat on drivers working in master mode as
spi_slave_abort() function checks if SPI slave mode is supported.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
Link: https://lore.kernel.org/r/20190924110547.14770-2-lukma@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Reported-by: kbuild test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20190925091143.15468-2-lukma@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spidev.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 255786f2e8447..3ea9d8a3e6e89 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -627,6 +627,9 @@ static int spidev_release(struct inode *inode, struct file *filp)
 		if (dofree)
 			kfree(spidev);
 	}
+#ifdef CONFIG_SPI_SLAVE
+	spi_slave_abort(spidev->spi);
+#endif
 	mutex_unlock(&device_list_lock);
 
 	return 0;
-- 
2.20.1

[PATCH AUTOSEL 5.4 022/350] drm/meson: vclk: use the correct G12A frac max value

[Sasha Levin]

From: Neil Armstrong <narmstrong@baylibre.com>

[ Upstream commit d56276a13c2b9ea287b9fc7cc78bed4c43b286f9 ]

When calculating the HDMI PLL settings for a DMT mode PHY frequency,
use the correct max fractional PLL value for G12A VPU.

With this fix, we can finally setup the 1024x768-60 mode.

Fixes: 202b9808f8ed ("drm/meson: Add G12A Video Clock setup")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190828132311.23881-1-narmstrong@baylibre.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/meson/meson_vclk.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/meson/meson_vclk.c b/drivers/gpu/drm/meson/meson_vclk.c
index ac491a7819527..f690793ae2d57 100644
--- a/drivers/gpu/drm/meson/meson_vclk.c
+++ b/drivers/gpu/drm/meson/meson_vclk.c
@@ -638,13 +638,18 @@ static bool meson_hdmi_pll_validate_params(struct meson_drm *priv,
 		if (frac >= HDMI_FRAC_MAX_GXBB)
 			return false;
 	} else if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXM) ||
-		   meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXL) ||
-		   meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A)) {
+		   meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXL)) {
 		/* Empiric supported min/max dividers */
 		if (m < 106 || m > 247)
 			return false;
 		if (frac >= HDMI_FRAC_MAX_GXL)
 			return false;
+	} else if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A)) {
+		/* Empiric supported min/max dividers */
+		if (m < 106 || m > 247)
+			return false;
+		if (frac >= HDMI_FRAC_MAX_G12A)
+			return false;
 	}
 
 	return true;
-- 
2.20.1

[PATCH AUTOSEL 5.4 022/350] drm/meson: vclk: use the correct G12A frac max value

[Sasha Levin]

From: Neil Armstrong <narmstrong@baylibre.com>

[ Upstream commit d56276a13c2b9ea287b9fc7cc78bed4c43b286f9 ]

When calculating the HDMI PLL settings for a DMT mode PHY frequency,
use the correct max fractional PLL value for G12A VPU.

With this fix, we can finally setup the 1024x768-60 mode.

Fixes: 202b9808f8ed ("drm/meson: Add G12A Video Clock setup")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190828132311.23881-1-narmstrong@baylibre.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/meson/meson_vclk.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/meson/meson_vclk.c b/drivers/gpu/drm/meson/meson_vclk.c
index ac491a7819527..f690793ae2d57 100644
--- a/drivers/gpu/drm/meson/meson_vclk.c
+++ b/drivers/gpu/drm/meson/meson_vclk.c
@@ -638,13 +638,18 @@ static bool meson_hdmi_pll_validate_params(struct meson_drm *priv,
 		if (frac >= HDMI_FRAC_MAX_GXBB)
 			return false;
 	} else if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXM) ||
-		   meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXL) ||
-		   meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A)) {
+		   meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXL)) {
 		/* Empiric supported min/max dividers */
 		if (m < 106 || m > 247)
 			return false;
 		if (frac >= HDMI_FRAC_MAX_GXL)
 			return false;
+	} else if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A)) {
+		/* Empiric supported min/max dividers */
+		if (m < 106 || m > 247)
+			return false;
+		if (frac >= HDMI_FRAC_MAX_G12A)
+			return false;
 	}
 
 	return true;
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.4 023/350] staging: rtl8192u: fix multiple memory leaks on error path

[Sasha Levin]

From: Navid Emamdoost <navid.emamdoost@gmail.com>

[ Upstream commit ca312438cf176a16d4b89350cade8789ba8d7133 ]

In rtl8192_tx on error handling path allocated urbs and also skb should
be released.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Link: https://lore.kernel.org/r/20190920025137.29407-1-navid.emamdoost@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/rtl8192u/r8192U_core.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index 2821411878ce0..511136dce3a4c 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -1422,7 +1422,7 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb)
 		(struct tx_fwinfo_819x_usb *)(skb->data + USB_HWDESC_HEADER_LEN);
 	struct usb_device *udev = priv->udev;
 	int pend;
-	int status;
+	int status, rt = -1;
 	struct urb *tx_urb = NULL, *tx_urb_zero = NULL;
 	unsigned int idx_pipe;
 
@@ -1566,8 +1566,10 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb)
 		}
 		if (bSend0Byte) {
 			tx_urb_zero = usb_alloc_urb(0, GFP_ATOMIC);
-			if (!tx_urb_zero)
-				return -ENOMEM;
+			if (!tx_urb_zero) {
+				rt = -ENOMEM;
+				goto error;
+			}
 			usb_fill_bulk_urb(tx_urb_zero, udev,
 					  usb_sndbulkpipe(udev, idx_pipe),
 					  &zero, 0, tx_zero_isr, dev);
@@ -1577,7 +1579,7 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb)
 					 "Error TX URB for zero byte %d, error %d",
 					 atomic_read(&priv->tx_pending[tcb_desc->queue_index]),
 					 status);
-				return -1;
+				goto error;
 			}
 		}
 		netif_trans_update(dev);
@@ -1588,7 +1590,12 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb)
 	RT_TRACE(COMP_ERR, "Error TX URB %d, error %d",
 		 atomic_read(&priv->tx_pending[tcb_desc->queue_index]),
 		 status);
-	return -1;
+
+error:
+	dev_kfree_skb_any(skb);
+	usb_free_urb(tx_urb);
+	usb_free_urb(tx_urb_zero);
+	return rt;
 }
 
 static short rtl8192_usb_initendpoints(struct net_device *dev)
-- 
2.20.1

[PATCH AUTOSEL 5.4 023/350] staging: rtl8192u: fix multiple memory leaks on error path

[Sasha Levin]

From: Navid Emamdoost <navid.emamdoost@gmail.com>

[ Upstream commit ca312438cf176a16d4b89350cade8789ba8d7133 ]

In rtl8192_tx on error handling path allocated urbs and also skb should
be released.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Link: https://lore.kernel.org/r/20190920025137.29407-1-navid.emamdoost@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/rtl8192u/r8192U_core.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index 2821411878ce0..511136dce3a4c 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -1422,7 +1422,7 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb)
 		(struct tx_fwinfo_819x_usb *)(skb->data + USB_HWDESC_HEADER_LEN);
 	struct usb_device *udev = priv->udev;
 	int pend;
-	int status;
+	int status, rt = -1;
 	struct urb *tx_urb = NULL, *tx_urb_zero = NULL;
 	unsigned int idx_pipe;
 
@@ -1566,8 +1566,10 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb)
 		}
 		if (bSend0Byte) {
 			tx_urb_zero = usb_alloc_urb(0, GFP_ATOMIC);
-			if (!tx_urb_zero)
-				return -ENOMEM;
+			if (!tx_urb_zero) {
+				rt = -ENOMEM;
+				goto error;
+			}
 			usb_fill_bulk_urb(tx_urb_zero, udev,
 					  usb_sndbulkpipe(udev, idx_pipe),
 					  &zero, 0, tx_zero_isr, dev);
@@ -1577,7 +1579,7 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb)
 					 "Error TX URB for zero byte %d, error %d",
 					 atomic_read(&priv->tx_pending[tcb_desc->queue_index]),
 					 status);
-				return -1;
+				goto error;
 			}
 		}
 		netif_trans_update(dev);
@@ -1588,7 +1590,12 @@ short rtl8192_tx(struct net_device *dev, struct sk_buff *skb)
 	RT_TRACE(COMP_ERR, "Error TX URB %d, error %d",
 		 atomic_read(&priv->tx_pending[tcb_desc->queue_index]),
 		 status);
-	return -1;
+
+error:
+	dev_kfree_skb_any(skb);
+	usb_free_urb(tx_urb);
+	usb_free_urb(tx_urb_zero);
+	return rt;
 }
 
 static short rtl8192_usb_initendpoints(struct net_device *dev)
-- 
2.20.1

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

[PATCH AUTOSEL 5.4 024/350] staging: rtl8188eu: fix possible null dereference

[Sasha Levin]

From: Connor Kuehl <connor.kuehl@canonical.com>

[ Upstream commit 228241944a48113470d3c3b46c88ba7fbe0a274b ]

Inside a nested 'else' block at the beginning of this function is a
call that assigns 'psta' to the return value of 'rtw_get_stainfo()'.
If 'rtw_get_stainfo()' returns NULL and the flow of control reaches
the 'else if' where 'psta' is dereferenced, then we will dereference
a NULL pointer.

Fix this by checking if 'psta' is not NULL before reading its
'psta->qos_option' data member.

Addresses-Coverity: ("Dereference null return value")

Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/r/20190926150317.5894-1-connor.kuehl@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/rtl8188eu/core/rtw_xmit.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/rtl8188eu/core/rtw_xmit.c b/drivers/staging/rtl8188eu/core/rtw_xmit.c
index 952f2ab513478..c37591657bac4 100644
--- a/drivers/staging/rtl8188eu/core/rtw_xmit.c
+++ b/drivers/staging/rtl8188eu/core/rtw_xmit.c
@@ -776,7 +776,7 @@ s32 rtw_make_wlanhdr(struct adapter *padapter, u8 *hdr, struct pkt_attrib *pattr
 			memcpy(pwlanhdr->addr2, get_bssid(pmlmepriv), ETH_ALEN);
 			memcpy(pwlanhdr->addr3, pattrib->src, ETH_ALEN);
 
-			if (psta->qos_option)
+			if (psta && psta->qos_option)
 				qos_option = true;
 		} else if (check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) ||
 			   check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE)) {
@@ -784,7 +784,7 @@ s32 rtw_make_wlanhdr(struct adapter *padapter, u8 *hdr, struct pkt_attrib *pattr
 			memcpy(pwlanhdr->addr2, pattrib->src, ETH_ALEN);
 			memcpy(pwlanhdr->addr3, get_bssid(pmlmepriv), ETH_ALEN);
 
-			if (psta->qos_option)
+			if (psta && psta->qos_option)
 				qos_option = true;
 		} else {
 			RT_TRACE(_module_rtl871x_xmit_c_, _drv_err_, ("fw_state:%x is not allowed to xmit frame\n", get_fwstate(pmlmepriv)));
-- 
2.20.1

[PATCH AUTOSEL 5.4 024/350] staging: rtl8188eu: fix possible null dereference

[Sasha Levin]

From: Connor Kuehl <connor.kuehl@canonical.com>

[ Upstream commit 228241944a48113470d3c3b46c88ba7fbe0a274b ]

Inside a nested 'else' block at the beginning of this function is a
call that assigns 'psta' to the return value of 'rtw_get_stainfo()'.
If 'rtw_get_stainfo()' returns NULL and the flow of control reaches
the 'else if' where 'psta' is dereferenced, then we will dereference
a NULL pointer.

Fix this by checking if 'psta' is not NULL before reading its
'psta->qos_option' data member.

Addresses-Coverity: ("Dereference null return value")

Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/r/20190926150317.5894-1-connor.kuehl@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/rtl8188eu/core/rtw_xmit.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/rtl8188eu/core/rtw_xmit.c b/drivers/staging/rtl8188eu/core/rtw_xmit.c
index 952f2ab513478..c37591657bac4 100644
--- a/drivers/staging/rtl8188eu/core/rtw_xmit.c
+++ b/drivers/staging/rtl8188eu/core/rtw_xmit.c
@@ -776,7 +776,7 @@ s32 rtw_make_wlanhdr(struct adapter *padapter, u8 *hdr, struct pkt_attrib *pattr
 			memcpy(pwlanhdr->addr2, get_bssid(pmlmepriv), ETH_ALEN);
 			memcpy(pwlanhdr->addr3, pattrib->src, ETH_ALEN);
 
-			if (psta->qos_option)
+			if (psta && psta->qos_option)
 				qos_option = true;
 		} else if (check_fwstate(pmlmepriv, WIFI_ADHOC_STATE) ||
 			   check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE)) {
@@ -784,7 +784,7 @@ s32 rtw_make_wlanhdr(struct adapter *padapter, u8 *hdr, struct pkt_attrib *pattr
 			memcpy(pwlanhdr->addr2, pattrib->src, ETH_ALEN);
 			memcpy(pwlanhdr->addr3, get_bssid(pmlmepriv), ETH_ALEN);
 
-			if (psta->qos_option)
+			if (psta && psta->qos_option)
 				qos_option = true;
 		} else {
 			RT_TRACE(_module_rtl871x_xmit_c_, _drv_err_, ("fw_state:%x is not allowed to xmit frame\n", get_fwstate(pmlmepriv)));
-- 
2.20.1

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

[PATCH AUTOSEL 5.4 025/350] objtool: add kunit_try_catch_throw to the noreturn list

[Sasha Levin]

From: Brendan Higgins <brendanhiggins@google.com>

[ Upstream commit 33adf80f5b52e3f7c55ad66ffcaaff93c6888aaa ]

Fix the following warning seen on GCC 7.3:
  kunit/test-test.o: warning: objtool: kunit_test_unsuccessful_try() falls through to next function kunit_test_catch()

kunit_try_catch_throw is a function added in the following patch in this
series; it allows KUnit, a unit testing framework for the kernel, to
bail out of a broken test. As a consequence, it is a new __noreturn
function that objtool thinks is broken (as seen above). So fix this
warning by adding kunit_try_catch_throw to objtool's noreturn list.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://www.spinics.net/lists/linux-kbuild/msg21708.html
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 tools/objtool/check.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/tools/objtool/check.c b/tools/objtool/check.c
index 044c9a3cb2472..543c068096b12 100644
--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -144,6 +144,7 @@ static bool __dead_end_function(struct objtool_file *file, struct symbol *func,
 		"usercopy_abort",
 		"machine_real_restart",
 		"rewind_stack_do_exit",
+		"kunit_try_catch_throw",
 	};
 
 	if (!func)
-- 
2.20.1

Re: [PATCH AUTOSEL 5.4 025/350] objtool: add kunit_try_catch_throw to the noreturn list

[Brendan Higgins]

On Tue, Dec 10, 2019 at 1:04 PM Sasha Levin <sashal@kernel.org> wrote:
>
> From: Brendan Higgins <brendanhiggins@google.com>
>
> [ Upstream commit 33adf80f5b52e3f7c55ad66ffcaaff93c6888aaa ]
>
> Fix the following warning seen on GCC 7.3:
>   kunit/test-test.o: warning: objtool: kunit_test_unsuccessful_try() falls through to next function kunit_test_catch()
>
> kunit_try_catch_throw is a function added in the following patch in this
> series; it allows KUnit, a unit testing framework for the kernel, to
> bail out of a broken test. As a consequence, it is a new __noreturn
> function that objtool thinks is broken (as seen above). So fix this
> warning by adding kunit_try_catch_throw to objtool's noreturn list.
>
> Reported-by: kbuild test robot <lkp@intel.com>
> Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
> Link: https://www.spinics.net/lists/linux-kbuild/msg21708.html
> Cc: Peter Zijlstra <peterz@infradead.org>
> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>

I don't think this change should be backported. This patch is to
ignore an erroneous warning introduced by KUnit; it serves no purpose
prior to the KUnit patches being merged.

> ---
>  tools/objtool/check.c | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/tools/objtool/check.c b/tools/objtool/check.c
> index 044c9a3cb2472..543c068096b12 100644
> --- a/tools/objtool/check.c
> +++ b/tools/objtool/check.c
> @@ -144,6 +144,7 @@ static bool __dead_end_function(struct objtool_file *file, struct symbol *func,
>                 "usercopy_abort",
>                 "machine_real_restart",
>                 "rewind_stack_do_exit",
> +               "kunit_try_catch_throw",
>         };
>
>         if (!func)
> --
> 2.20.1
>

Re: [PATCH AUTOSEL 5.4 025/350] objtool: add kunit_try_catch_throw to the noreturn list

[Sasha Levin]

On Tue, Dec 10, 2019 at 01:25:54PM -0800, Brendan Higgins wrote:
>On Tue, Dec 10, 2019 at 1:04 PM Sasha Levin <sashal@kernel.org> wrote:
>>
>> From: Brendan Higgins <brendanhiggins@google.com>
>>
>> [ Upstream commit 33adf80f5b52e3f7c55ad66ffcaaff93c6888aaa ]
>>
>> Fix the following warning seen on GCC 7.3:
>>   kunit/test-test.o: warning: objtool: kunit_test_unsuccessful_try() falls through to next function kunit_test_catch()
>>
>> kunit_try_catch_throw is a function added in the following patch in this
>> series; it allows KUnit, a unit testing framework for the kernel, to
>> bail out of a broken test. As a consequence, it is a new __noreturn
>> function that objtool thinks is broken (as seen above). So fix this
>> warning by adding kunit_try_catch_throw to objtool's noreturn list.
>>
>> Reported-by: kbuild test robot <lkp@intel.com>
>> Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
>> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
>> Link: https://www.spinics.net/lists/linux-kbuild/msg21708.html
>> Cc: Peter Zijlstra <peterz@infradead.org>
>> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>
>I don't think this change should be backported. This patch is to
>ignore an erroneous warning introduced by KUnit; it serves no purpose
>prior to the KUnit patches being merged.

I'll drop it, thanks!

-- 
Thanks,
Sasha

[PATCH AUTOSEL 5.4 026/350] rtlwifi: prevent memory leak in rtl_usb_probe

[Sasha Levin]

From: Navid Emamdoost <navid.emamdoost@gmail.com>

[ Upstream commit 3f93616951138a598d930dcaec40f2bfd9ce43bb ]

In rtl_usb_probe if allocation for usb_data fails the allocated hw
should be released. In addition the allocated rtlpriv->usb_data should
be released on error handling path.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtlwifi/usb.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/usb.c b/drivers/net/wireless/realtek/rtlwifi/usb.c
index 4b59f3b46b281..348b0072cdd69 100644
--- a/drivers/net/wireless/realtek/rtlwifi/usb.c
+++ b/drivers/net/wireless/realtek/rtlwifi/usb.c
@@ -1021,8 +1021,10 @@ int rtl_usb_probe(struct usb_interface *intf,
 	rtlpriv->hw = hw;
 	rtlpriv->usb_data = kcalloc(RTL_USB_MAX_RX_COUNT, sizeof(u32),
 				    GFP_KERNEL);
-	if (!rtlpriv->usb_data)
+	if (!rtlpriv->usb_data) {
+		ieee80211_free_hw(hw);
 		return -ENOMEM;
+	}
 
 	/* this spin lock must be initialized early */
 	spin_lock_init(&rtlpriv->locks.usb_lock);
@@ -1083,6 +1085,7 @@ error_out2:
 	_rtl_usb_io_handler_release(hw);
 	usb_put_dev(udev);
 	complete(&rtlpriv->firmware_loading_complete);
+	kfree(rtlpriv->usb_data);
 	return -ENODEV;
 }
 EXPORT_SYMBOL(rtl_usb_probe);
-- 
2.20.1

[PATCH AUTOSEL 5.4 027/350] libertas: fix a potential NULL pointer dereference

[Sasha Levin]

From: Allen Pais <allen.pais@oracle.com>

[ Upstream commit 7da413a18583baaf35dd4a8eb414fa410367d7f2 ]

alloc_workqueue is not checked for errors and as a result,
a potential NULL dereference could occur.

Signed-off-by: Allen Pais <allen.pais@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/marvell/libertas/if_sdio.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/wireless/marvell/libertas/if_sdio.c b/drivers/net/wireless/marvell/libertas/if_sdio.c
index 242d8845da3fa..30f1025ecb9bc 100644
--- a/drivers/net/wireless/marvell/libertas/if_sdio.c
+++ b/drivers/net/wireless/marvell/libertas/if_sdio.c
@@ -1179,6 +1179,10 @@ static int if_sdio_probe(struct sdio_func *func,
 
 	spin_lock_init(&card->lock);
 	card->workqueue = alloc_workqueue("libertas_sdio", WQ_MEM_RECLAIM, 0);
+	if (unlikely(!card->workqueue)) {
+		ret = -ENOMEM;
+		goto err_queue;
+	}
 	INIT_WORK(&card->packet_worker, if_sdio_host_to_card_worker);
 	init_waitqueue_head(&card->pwron_waitq);
 
@@ -1230,6 +1234,7 @@ err_activate_card:
 	lbs_remove_card(priv);
 free:
 	destroy_workqueue(card->workqueue);
+err_queue:
 	while (card->packets) {
 		packet = card->packets;
 		card->packets = card->packets->next;
-- 
2.20.1

[PATCH AUTOSEL 5.4 028/350] Revert "pinctrl: sh-pfc: r8a77990: Fix MOD_SEL1 bit30 when using SSI_SCK

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 3672bc7093434621c83299ef27ea3b3225a67600 ]

This reverts commit e87882eb9be10b2b9e28156922c2a47d877f5db4.

According to the R-Car Gen3 Hardware Manual Errata for Rev 1.00 of Aug
24, 2018, the SEL_SSI2_{0,1} definition was to be deleted.  However,
this errata merely fixed an accidental double definition in the Hardware
User's Manual Rev. 1.00.  The real definition is still present in later
revisions of the manual (Rev. 1.50 and Rev. 2.00).

Hence revert the commit to recover the definition.

Based on a patch in the BSP by Takeshi Kihara
<takeshi.kihara.df@renesas.com>.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Link: https://lore.kernel.org/r/20190904121658.2617-3-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/sh-pfc/pfc-r8a77990.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a77990.c b/drivers/pinctrl/sh-pfc/pfc-r8a77990.c
index 2dfb8d9cfda12..3808409cab385 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a77990.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a77990.c
@@ -448,6 +448,7 @@ FM(IP12_31_28)	IP12_31_28	FM(IP13_31_28)	IP13_31_28	FM(IP14_31_28)	IP14_31_28	FM
 #define MOD_SEL0_1_0	   REV4(FM(SEL_SPEED_PULSE_IF_0),	FM(SEL_SPEED_PULSE_IF_1),	FM(SEL_SPEED_PULSE_IF_2),	F_(0, 0))
 
 /* MOD_SEL1 */			/* 0 */				/* 1 */				/* 2 */				/* 3 */			/* 4 */			/* 5 */		/* 6 */		/* 7 */
+#define MOD_SEL1_30		FM(SEL_SSI2_0)			FM(SEL_SSI2_1)
 #define MOD_SEL1_29		FM(SEL_TIMER_TMU_0)		FM(SEL_TIMER_TMU_1)
 #define MOD_SEL1_28		FM(SEL_USB_20_CH0_0)		FM(SEL_USB_20_CH0_1)
 #define MOD_SEL1_26		FM(SEL_DRIF2_0)			FM(SEL_DRIF2_1)
@@ -468,7 +469,7 @@ FM(IP12_31_28)	IP12_31_28	FM(IP13_31_28)	IP13_31_28	FM(IP14_31_28)	IP14_31_28	FM
 
 #define PINMUX_MOD_SELS	\
 \
-MOD_SEL0_30_29 \
+MOD_SEL0_30_29		MOD_SEL1_30 \
 			MOD_SEL1_29 \
 MOD_SEL0_28		MOD_SEL1_28 \
 MOD_SEL0_27_26 \
@@ -1058,7 +1059,7 @@ static const u16 pinmux_data[] = {
 	PINMUX_IPSR_MSEL(IP10_27_24,		RIF0_CLK_B,	SEL_DRIF0_1),
 	PINMUX_IPSR_MSEL(IP10_27_24,		SCL2_B,		SEL_I2C2_1),
 	PINMUX_IPSR_MSEL(IP10_27_24,		TCLK1_A,	SEL_TIMER_TMU_0),
-	PINMUX_IPSR_GPSR(IP10_27_24,		SSI_SCK2_B),
+	PINMUX_IPSR_MSEL(IP10_27_24,		SSI_SCK2_B,	SEL_SSI2_1),
 	PINMUX_IPSR_GPSR(IP10_27_24,		TS_SCK0),
 
 	PINMUX_IPSR_GPSR(IP10_31_28,		SD0_WP),
@@ -1067,7 +1068,7 @@ static const u16 pinmux_data[] = {
 	PINMUX_IPSR_MSEL(IP10_31_28,		RIF0_D0_B,	SEL_DRIF0_1),
 	PINMUX_IPSR_MSEL(IP10_31_28,		SDA2_B,		SEL_I2C2_1),
 	PINMUX_IPSR_MSEL(IP10_31_28,		TCLK2_A,	SEL_TIMER_TMU_0),
-	PINMUX_IPSR_GPSR(IP10_31_28,		SSI_WS2_B),
+	PINMUX_IPSR_MSEL(IP10_31_28,		SSI_WS2_B,	SEL_SSI2_1),
 	PINMUX_IPSR_GPSR(IP10_31_28,		TS_SDAT0),
 
 	/* IPSR11 */
@@ -1085,13 +1086,13 @@ static const u16 pinmux_data[] = {
 
 	PINMUX_IPSR_MSEL(IP11_11_8,		RX0_A,		SEL_SCIF0_0),
 	PINMUX_IPSR_MSEL(IP11_11_8,		HRX1_A,		SEL_HSCIF1_0),
-	PINMUX_IPSR_GPSR(IP11_11_8,		SSI_SCK2_A),
+	PINMUX_IPSR_MSEL(IP11_11_8,		SSI_SCK2_A,	SEL_SSI2_0),
 	PINMUX_IPSR_GPSR(IP11_11_8,		RIF1_SYNC),
 	PINMUX_IPSR_GPSR(IP11_11_8,		TS_SCK1),
 
 	PINMUX_IPSR_MSEL(IP11_15_12,		TX0_A,		SEL_SCIF0_0),
 	PINMUX_IPSR_GPSR(IP11_15_12,		HTX1_A),
-	PINMUX_IPSR_GPSR(IP11_15_12,		SSI_WS2_A),
+	PINMUX_IPSR_MSEL(IP11_15_12,		SSI_WS2_A,	SEL_SSI2_0),
 	PINMUX_IPSR_GPSR(IP11_15_12,		RIF1_D0),
 	PINMUX_IPSR_GPSR(IP11_15_12,		TS_SDAT1),
 
@@ -4957,11 +4958,12 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = {
 		MOD_SEL0_1_0 ))
 	},
 	{ PINMUX_CFG_REG_VAR("MOD_SEL1", 0xe6060504, 32,
-			     GROUP(2, 1, 1, 1, 1, 1, 3, 3, 1, 1, 1, 1,
-				   2, 2, 2, 1, 1, 2, 1, 4),
+			     GROUP(1, 1, 1, 1, 1, 1, 1, 3, 3, 1, 1, 1,
+				   1, 2, 2, 2, 1, 1, 2, 1, 4),
 			     GROUP(
-		/* RESERVED 31, 30 */
-		0, 0, 0, 0,
+		/* RESERVED 31 */
+		0, 0,
+		MOD_SEL1_30
 		MOD_SEL1_29
 		MOD_SEL1_28
 		/* RESERVED 27 */
-- 
2.20.1

[PATCH AUTOSEL 5.4 028/350] Revert "pinctrl: sh-pfc: r8a77990: Fix MOD_SEL1 bit30 when using SSI_SCK2 and SSI_WS2"

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 3672bc7093434621c83299ef27ea3b3225a67600 ]

This reverts commit e87882eb9be10b2b9e28156922c2a47d877f5db4.

According to the R-Car Gen3 Hardware Manual Errata for Rev 1.00 of Aug
24, 2018, the SEL_SSI2_{0,1} definition was to be deleted.  However,
this errata merely fixed an accidental double definition in the Hardware
User's Manual Rev. 1.00.  The real definition is still present in later
revisions of the manual (Rev. 1.50 and Rev. 2.00).

Hence revert the commit to recover the definition.

Based on a patch in the BSP by Takeshi Kihara
<takeshi.kihara.df@renesas.com>.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Link: https://lore.kernel.org/r/20190904121658.2617-3-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/sh-pfc/pfc-r8a77990.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a77990.c b/drivers/pinctrl/sh-pfc/pfc-r8a77990.c
index 2dfb8d9cfda12..3808409cab385 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a77990.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a77990.c
@@ -448,6 +448,7 @@ FM(IP12_31_28)	IP12_31_28	FM(IP13_31_28)	IP13_31_28	FM(IP14_31_28)	IP14_31_28	FM
 #define MOD_SEL0_1_0	   REV4(FM(SEL_SPEED_PULSE_IF_0),	FM(SEL_SPEED_PULSE_IF_1),	FM(SEL_SPEED_PULSE_IF_2),	F_(0, 0))
 
 /* MOD_SEL1 */			/* 0 */				/* 1 */				/* 2 */				/* 3 */			/* 4 */			/* 5 */		/* 6 */		/* 7 */
+#define MOD_SEL1_30		FM(SEL_SSI2_0)			FM(SEL_SSI2_1)
 #define MOD_SEL1_29		FM(SEL_TIMER_TMU_0)		FM(SEL_TIMER_TMU_1)
 #define MOD_SEL1_28		FM(SEL_USB_20_CH0_0)		FM(SEL_USB_20_CH0_1)
 #define MOD_SEL1_26		FM(SEL_DRIF2_0)			FM(SEL_DRIF2_1)
@@ -468,7 +469,7 @@ FM(IP12_31_28)	IP12_31_28	FM(IP13_31_28)	IP13_31_28	FM(IP14_31_28)	IP14_31_28	FM
 
 #define PINMUX_MOD_SELS	\
 \
-MOD_SEL0_30_29 \
+MOD_SEL0_30_29		MOD_SEL1_30 \
 			MOD_SEL1_29 \
 MOD_SEL0_28		MOD_SEL1_28 \
 MOD_SEL0_27_26 \
@@ -1058,7 +1059,7 @@ static const u16 pinmux_data[] = {
 	PINMUX_IPSR_MSEL(IP10_27_24,		RIF0_CLK_B,	SEL_DRIF0_1),
 	PINMUX_IPSR_MSEL(IP10_27_24,		SCL2_B,		SEL_I2C2_1),
 	PINMUX_IPSR_MSEL(IP10_27_24,		TCLK1_A,	SEL_TIMER_TMU_0),
-	PINMUX_IPSR_GPSR(IP10_27_24,		SSI_SCK2_B),
+	PINMUX_IPSR_MSEL(IP10_27_24,		SSI_SCK2_B,	SEL_SSI2_1),
 	PINMUX_IPSR_GPSR(IP10_27_24,		TS_SCK0),
 
 	PINMUX_IPSR_GPSR(IP10_31_28,		SD0_WP),
@@ -1067,7 +1068,7 @@ static const u16 pinmux_data[] = {
 	PINMUX_IPSR_MSEL(IP10_31_28,		RIF0_D0_B,	SEL_DRIF0_1),
 	PINMUX_IPSR_MSEL(IP10_31_28,		SDA2_B,		SEL_I2C2_1),
 	PINMUX_IPSR_MSEL(IP10_31_28,		TCLK2_A,	SEL_TIMER_TMU_0),
-	PINMUX_IPSR_GPSR(IP10_31_28,		SSI_WS2_B),
+	PINMUX_IPSR_MSEL(IP10_31_28,		SSI_WS2_B,	SEL_SSI2_1),
 	PINMUX_IPSR_GPSR(IP10_31_28,		TS_SDAT0),
 
 	/* IPSR11 */
@@ -1085,13 +1086,13 @@ static const u16 pinmux_data[] = {
 
 	PINMUX_IPSR_MSEL(IP11_11_8,		RX0_A,		SEL_SCIF0_0),
 	PINMUX_IPSR_MSEL(IP11_11_8,		HRX1_A,		SEL_HSCIF1_0),
-	PINMUX_IPSR_GPSR(IP11_11_8,		SSI_SCK2_A),
+	PINMUX_IPSR_MSEL(IP11_11_8,		SSI_SCK2_A,	SEL_SSI2_0),
 	PINMUX_IPSR_GPSR(IP11_11_8,		RIF1_SYNC),
 	PINMUX_IPSR_GPSR(IP11_11_8,		TS_SCK1),
 
 	PINMUX_IPSR_MSEL(IP11_15_12,		TX0_A,		SEL_SCIF0_0),
 	PINMUX_IPSR_GPSR(IP11_15_12,		HTX1_A),
-	PINMUX_IPSR_GPSR(IP11_15_12,		SSI_WS2_A),
+	PINMUX_IPSR_MSEL(IP11_15_12,		SSI_WS2_A,	SEL_SSI2_0),
 	PINMUX_IPSR_GPSR(IP11_15_12,		RIF1_D0),
 	PINMUX_IPSR_GPSR(IP11_15_12,		TS_SDAT1),
 
@@ -4957,11 +4958,12 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = {
 		MOD_SEL0_1_0 ))
 	},
 	{ PINMUX_CFG_REG_VAR("MOD_SEL1", 0xe6060504, 32,
-			     GROUP(2, 1, 1, 1, 1, 1, 3, 3, 1, 1, 1, 1,
-				   2, 2, 2, 1, 1, 2, 1, 4),
+			     GROUP(1, 1, 1, 1, 1, 1, 1, 3, 3, 1, 1, 1,
+				   1, 2, 2, 2, 1, 1, 2, 1, 4),
 			     GROUP(
-		/* RESERVED 31, 30 */
-		0, 0, 0, 0,
+		/* RESERVED 31 */
+		0, 0,
+		MOD_SEL1_30
 		MOD_SEL1_29
 		MOD_SEL1_28
 		/* RESERVED 27 */
-- 
2.20.1

[PATCH AUTOSEL 5.4 029/350] Revert "pinctrl: sh-pfc: r8a77990: Fix MOD_SEL1 bit31 when using SIM0_D"

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 7666dfd533d4c55733037775d47a8e3551b341a2 ]

This reverts commit e167d723e1a472d252e5c4baf823b77ce5543b05.

According to the R-Car Gen3 Hardware Manual Errata for Rev 1.00 of Aug
24, 2018, the SEL_SIMCARD_{0,1} definition was to be deleted.  However,
this errata merely fixed an accidental double definition in the Hardware
User's Manual Rev. 1.00.  The real definition is still present in later
revisions of the manual (Rev. 1.50 and Rev. 2.00).

Hence revert the commit to recover the definition.

Based on a patch in the BSP by Takeshi Kihara
<takeshi.kihara.df@renesas.com>.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Link: https://lore.kernel.org/r/20190904121658.2617-4-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/sh-pfc/pfc-r8a77990.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a77990.c b/drivers/pinctrl/sh-pfc/pfc-r8a77990.c
index 3808409cab385..5200dadd6b3ef 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a77990.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a77990.c
@@ -448,6 +448,7 @@ FM(IP12_31_28)	IP12_31_28	FM(IP13_31_28)	IP13_31_28	FM(IP14_31_28)	IP14_31_28	FM
 #define MOD_SEL0_1_0	   REV4(FM(SEL_SPEED_PULSE_IF_0),	FM(SEL_SPEED_PULSE_IF_1),	FM(SEL_SPEED_PULSE_IF_2),	F_(0, 0))
 
 /* MOD_SEL1 */			/* 0 */				/* 1 */				/* 2 */				/* 3 */			/* 4 */			/* 5 */		/* 6 */		/* 7 */
+#define MOD_SEL1_31		FM(SEL_SIMCARD_0)		FM(SEL_SIMCARD_1)
 #define MOD_SEL1_30		FM(SEL_SSI2_0)			FM(SEL_SSI2_1)
 #define MOD_SEL1_29		FM(SEL_TIMER_TMU_0)		FM(SEL_TIMER_TMU_1)
 #define MOD_SEL1_28		FM(SEL_USB_20_CH0_0)		FM(SEL_USB_20_CH0_1)
@@ -469,6 +470,7 @@ FM(IP12_31_28)	IP12_31_28	FM(IP13_31_28)	IP13_31_28	FM(IP14_31_28)	IP14_31_28	FM
 
 #define PINMUX_MOD_SELS	\
 \
+			MOD_SEL1_31 \
 MOD_SEL0_30_29		MOD_SEL1_30 \
 			MOD_SEL1_29 \
 MOD_SEL0_28		MOD_SEL1_28 \
@@ -1197,7 +1199,7 @@ static const u16 pinmux_data[] = {
 	PINMUX_IPSR_MSEL(IP13_19_16,		RIF0_D1_A,	SEL_DRIF0_0),
 	PINMUX_IPSR_MSEL(IP13_19_16,		SDA1_B,		SEL_I2C1_1),
 	PINMUX_IPSR_MSEL(IP13_19_16,		TCLK2_B,	SEL_TIMER_TMU_1),
-	PINMUX_IPSR_GPSR(IP13_19_16,		SIM0_D_A),
+	PINMUX_IPSR_MSEL(IP13_19_16,		SIM0_D_A,	SEL_SIMCARD_0),
 
 	PINMUX_IPSR_GPSR(IP13_23_20,		MLB_DAT),
 	PINMUX_IPSR_MSEL(IP13_23_20,		TX0_B,		SEL_SCIF0_1),
@@ -1265,7 +1267,7 @@ static const u16 pinmux_data[] = {
 	PINMUX_IPSR_GPSR(IP15_15_12,		TPU0TO2),
 	PINMUX_IPSR_MSEL(IP15_15_12,		SDA1_D,		SEL_I2C1_3),
 	PINMUX_IPSR_MSEL(IP15_15_12,		FSO_CFE_1_N_B,	SEL_FSO_1),
-	PINMUX_IPSR_GPSR(IP15_15_12,		SIM0_D_B),
+	PINMUX_IPSR_MSEL(IP15_15_12,		SIM0_D_B,	SEL_SIMCARD_1),
 
 	PINMUX_IPSR_GPSR(IP15_19_16,		SSI_SDATA6),
 	PINMUX_IPSR_MSEL(IP15_19_16,		HRTS2_N_A,	SEL_HSCIF2_0),
@@ -4961,8 +4963,7 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = {
 			     GROUP(1, 1, 1, 1, 1, 1, 1, 3, 3, 1, 1, 1,
 				   1, 2, 2, 2, 1, 1, 2, 1, 4),
 			     GROUP(
-		/* RESERVED 31 */
-		0, 0,
+		MOD_SEL1_31
 		MOD_SEL1_30
 		MOD_SEL1_29
 		MOD_SEL1_28
-- 
2.20.1

[PATCH AUTOSEL 5.4 029/350] Revert "pinctrl: sh-pfc: r8a77990: Fix MOD_SEL1 bit31 when using SIM0_D"

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 7666dfd533d4c55733037775d47a8e3551b341a2 ]

This reverts commit e167d723e1a472d252e5c4baf823b77ce5543b05.

According to the R-Car Gen3 Hardware Manual Errata for Rev 1.00 of Aug
24, 2018, the SEL_SIMCARD_{0,1} definition was to be deleted.  However,
this errata merely fixed an accidental double definition in the Hardware
User's Manual Rev. 1.00.  The real definition is still present in later
revisions of the manual (Rev. 1.50 and Rev. 2.00).

Hence revert the commit to recover the definition.

Based on a patch in the BSP by Takeshi Kihara
<takeshi.kihara.df@renesas.com>.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Link: https://lore.kernel.org/r/20190904121658.2617-4-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pinctrl/sh-pfc/pfc-r8a77990.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a77990.c b/drivers/pinctrl/sh-pfc/pfc-r8a77990.c
index 3808409cab385..5200dadd6b3ef 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a77990.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a77990.c
@@ -448,6 +448,7 @@ FM(IP12_31_28)	IP12_31_28	FM(IP13_31_28)	IP13_31_28	FM(IP14_31_28)	IP14_31_28	FM
 #define MOD_SEL0_1_0	   REV4(FM(SEL_SPEED_PULSE_IF_0),	FM(SEL_SPEED_PULSE_IF_1),	FM(SEL_SPEED_PULSE_IF_2),	F_(0, 0))
 
 /* MOD_SEL1 */			/* 0 */				/* 1 */				/* 2 */				/* 3 */			/* 4 */			/* 5 */		/* 6 */		/* 7 */
+#define MOD_SEL1_31		FM(SEL_SIMCARD_0)		FM(SEL_SIMCARD_1)
 #define MOD_SEL1_30		FM(SEL_SSI2_0)			FM(SEL_SSI2_1)
 #define MOD_SEL1_29		FM(SEL_TIMER_TMU_0)		FM(SEL_TIMER_TMU_1)
 #define MOD_SEL1_28		FM(SEL_USB_20_CH0_0)		FM(SEL_USB_20_CH0_1)
@@ -469,6 +470,7 @@ FM(IP12_31_28)	IP12_31_28	FM(IP13_31_28)	IP13_31_28	FM(IP14_31_28)	IP14_31_28	FM
 
 #define PINMUX_MOD_SELS	\
 \
+			MOD_SEL1_31 \
 MOD_SEL0_30_29		MOD_SEL1_30 \
 			MOD_SEL1_29 \
 MOD_SEL0_28		MOD_SEL1_28 \
@@ -1197,7 +1199,7 @@ static const u16 pinmux_data[] = {
 	PINMUX_IPSR_MSEL(IP13_19_16,		RIF0_D1_A,	SEL_DRIF0_0),
 	PINMUX_IPSR_MSEL(IP13_19_16,		SDA1_B,		SEL_I2C1_1),
 	PINMUX_IPSR_MSEL(IP13_19_16,		TCLK2_B,	SEL_TIMER_TMU_1),
-	PINMUX_IPSR_GPSR(IP13_19_16,		SIM0_D_A),
+	PINMUX_IPSR_MSEL(IP13_19_16,		SIM0_D_A,	SEL_SIMCARD_0),
 
 	PINMUX_IPSR_GPSR(IP13_23_20,		MLB_DAT),
 	PINMUX_IPSR_MSEL(IP13_23_20,		TX0_B,		SEL_SCIF0_1),
@@ -1265,7 +1267,7 @@ static const u16 pinmux_data[] = {
 	PINMUX_IPSR_GPSR(IP15_15_12,		TPU0TO2),
 	PINMUX_IPSR_MSEL(IP15_15_12,		SDA1_D,		SEL_I2C1_3),
 	PINMUX_IPSR_MSEL(IP15_15_12,		FSO_CFE_1_N_B,	SEL_FSO_1),
-	PINMUX_IPSR_GPSR(IP15_15_12,		SIM0_D_B),
+	PINMUX_IPSR_MSEL(IP15_15_12,		SIM0_D_B,	SEL_SIMCARD_1),
 
 	PINMUX_IPSR_GPSR(IP15_19_16,		SSI_SDATA6),
 	PINMUX_IPSR_MSEL(IP15_19_16,		HRTS2_N_A,	SEL_HSCIF2_0),
@@ -4961,8 +4963,7 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = {
 			     GROUP(1, 1, 1, 1, 1, 1, 1, 3, 3, 1, 1, 1,
 				   1, 2, 2, 2, 1, 1, 2, 1, 4),
 			     GROUP(
-		/* RESERVED 31 */
-		0, 0,
+		MOD_SEL1_31
 		MOD_SEL1_30
 		MOD_SEL1_29
 		MOD_SEL1_28
-- 
2.20.1

[PATCH AUTOSEL 5.4 030/350] ath10k: fix backtrace on coredump

[Sasha Levin]

From: Anilkumar Kolli <akolli@codeaurora.org>

[ Upstream commit d98ddae85a4a57124f87960047b1b6419312147f ]

In a multiradio board with one QCA9984 and one AR9987
after enabling the crashdump with module parameter
coredump_mask=7, below backtrace is seen.

vmalloc: allocation failure: 0 bytes
 kworker/u4:0: page allocation failure: order:0, mode:0x80d2
 CPU: 0 PID: 6 Comm: kworker/u4:0 Not tainted 3.14.77 #130
 Workqueue: ath10k_wq ath10k_core_register_work [ath10k_core]
 (unwind_backtrace) from [<c021abf8>] (show_stack+0x10/0x14)
 (dump_stack+0x80/0xa0)
 (warn_alloc_failed+0xd0/0xfc)
 (__vmalloc_node_range+0x1b4/0x1d8)
 (__vmalloc_node+0x34/0x40)
 (vzalloc+0x24/0x30)
 (ath10k_coredump_register+0x6c/0x88 [ath10k_core])
 (ath10k_core_register_work+0x350/0xb34 [ath10k_core])
 (process_one_work+0x20c/0x32c)
 (worker_thread+0x228/0x360)

This is due to ath10k_hw_mem_layout is not defined for AR9987.
For coredump undefined hw ramdump_size is 0.
Check for the ramdump_size before allocation memory.

Tested on: AR9987, QCA9984
FW version: 10.4-3.9.0.2-00044

Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/coredump.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/coredump.c b/drivers/net/wireless/ath/ath10k/coredump.c
index b6d2932383cf6..1cfe75a2d0c3a 100644
--- a/drivers/net/wireless/ath/ath10k/coredump.c
+++ b/drivers/net/wireless/ath/ath10k/coredump.c
@@ -1208,9 +1208,11 @@ static struct ath10k_dump_file_data *ath10k_coredump_build(struct ath10k *ar)
 		dump_tlv = (struct ath10k_tlv_dump_data *)(buf + sofar);
 		dump_tlv->type = cpu_to_le32(ATH10K_FW_CRASH_DUMP_RAM_DATA);
 		dump_tlv->tlv_len = cpu_to_le32(crash_data->ramdump_buf_len);
-		memcpy(dump_tlv->tlv_data, crash_data->ramdump_buf,
-		       crash_data->ramdump_buf_len);
-		sofar += sizeof(*dump_tlv) + crash_data->ramdump_buf_len;
+		if (crash_data->ramdump_buf_len) {
+			memcpy(dump_tlv->tlv_data, crash_data->ramdump_buf,
+			       crash_data->ramdump_buf_len);
+			sofar += sizeof(*dump_tlv) + crash_data->ramdump_buf_len;
+		}
 	}
 
 	mutex_unlock(&ar->dump_mutex);
@@ -1257,6 +1259,9 @@ int ath10k_coredump_register(struct ath10k *ar)
 	if (test_bit(ATH10K_FW_CRASH_DUMP_RAM_DATA, &ath10k_coredump_mask)) {
 		crash_data->ramdump_buf_len = ath10k_coredump_get_ramdump_size(ar);
 
+		if (!crash_data->ramdump_buf_len)
+			return 0;
+
 		crash_data->ramdump_buf = vzalloc(crash_data->ramdump_buf_len);
 		if (!crash_data->ramdump_buf)
 			return -ENOMEM;
-- 
2.20.1

[PATCH AUTOSEL 5.4 030/350] ath10k: fix backtrace on coredump

[Sasha Levin]

From: Anilkumar Kolli <akolli@codeaurora.org>

[ Upstream commit d98ddae85a4a57124f87960047b1b6419312147f ]

In a multiradio board with one QCA9984 and one AR9987
after enabling the crashdump with module parameter
coredump_mask=7, below backtrace is seen.

vmalloc: allocation failure: 0 bytes
 kworker/u4:0: page allocation failure: order:0, mode:0x80d2
 CPU: 0 PID: 6 Comm: kworker/u4:0 Not tainted 3.14.77 #130
 Workqueue: ath10k_wq ath10k_core_register_work [ath10k_core]
 (unwind_backtrace) from [<c021abf8>] (show_stack+0x10/0x14)
 (dump_stack+0x80/0xa0)
 (warn_alloc_failed+0xd0/0xfc)
 (__vmalloc_node_range+0x1b4/0x1d8)
 (__vmalloc_node+0x34/0x40)
 (vzalloc+0x24/0x30)
 (ath10k_coredump_register+0x6c/0x88 [ath10k_core])
 (ath10k_core_register_work+0x350/0xb34 [ath10k_core])
 (process_one_work+0x20c/0x32c)
 (worker_thread+0x228/0x360)

This is due to ath10k_hw_mem_layout is not defined for AR9987.
For coredump undefined hw ramdump_size is 0.
Check for the ramdump_size before allocation memory.

Tested on: AR9987, QCA9984
FW version: 10.4-3.9.0.2-00044

Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/coredump.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/coredump.c b/drivers/net/wireless/ath/ath10k/coredump.c
index b6d2932383cf6..1cfe75a2d0c3a 100644
--- a/drivers/net/wireless/ath/ath10k/coredump.c
+++ b/drivers/net/wireless/ath/ath10k/coredump.c
@@ -1208,9 +1208,11 @@ static struct ath10k_dump_file_data *ath10k_coredump_build(struct ath10k *ar)
 		dump_tlv = (struct ath10k_tlv_dump_data *)(buf + sofar);
 		dump_tlv->type = cpu_to_le32(ATH10K_FW_CRASH_DUMP_RAM_DATA);
 		dump_tlv->tlv_len = cpu_to_le32(crash_data->ramdump_buf_len);
-		memcpy(dump_tlv->tlv_data, crash_data->ramdump_buf,
-		       crash_data->ramdump_buf_len);
-		sofar += sizeof(*dump_tlv) + crash_data->ramdump_buf_len;
+		if (crash_data->ramdump_buf_len) {
+			memcpy(dump_tlv->tlv_data, crash_data->ramdump_buf,
+			       crash_data->ramdump_buf_len);
+			sofar += sizeof(*dump_tlv) + crash_data->ramdump_buf_len;
+		}
 	}
 
 	mutex_unlock(&ar->dump_mutex);
@@ -1257,6 +1259,9 @@ int ath10k_coredump_register(struct ath10k *ar)
 	if (test_bit(ATH10K_FW_CRASH_DUMP_RAM_DATA, &ath10k_coredump_mask)) {
 		crash_data->ramdump_buf_len = ath10k_coredump_get_ramdump_size(ar);
 
+		if (!crash_data->ramdump_buf_len)
+			return 0;
+
 		crash_data->ramdump_buf = vzalloc(crash_data->ramdump_buf_len);
 		if (!crash_data->ramdump_buf)
 			return -ENOMEM;
-- 
2.20.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

[PATCH AUTOSEL 5.4 031/350] IB/iser: bound protection_sg size by data_sg size

[Sasha Levin]

From: Max Gurtovoy <maxg@mellanox.com>

[ Upstream commit 7718cf03c3ce4b6ebd90107643ccd01c952a1fce ]

In case we don't set the sg_prot_tablesize, the scsi layer assign the
default size (65535 entries). We should limit this size since we should
take into consideration the underlaying device capability. This cap is
considered when calculating the sg_tablesize. Otherwise, for example,
we can get that /sys/block/sdb/queue/max_segments is 128 and
/sys/block/sdb/queue/max_integrity_segments is 65535.

Link: https://lore.kernel.org/r/1569359027-10987-1-git-send-email-maxg@mellanox.com
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/infiniband/ulp/iser/iscsi_iser.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c
index 2e72fc5af1573..c4c015c604465 100644
--- a/drivers/infiniband/ulp/iser/iscsi_iser.c
+++ b/drivers/infiniband/ulp/iser/iscsi_iser.c
@@ -646,6 +646,7 @@ iscsi_iser_session_create(struct iscsi_endpoint *ep,
 		if (ib_conn->pi_support) {
 			u32 sig_caps = ib_dev->attrs.sig_prot_cap;
 
+			shost->sg_prot_tablesize = shost->sg_tablesize;
 			scsi_host_set_prot(shost, iser_dif_prot_caps(sig_caps));
 			scsi_host_set_guard(shost, SHOST_DIX_GUARD_IP |
 						   SHOST_DIX_GUARD_CRC);
-- 
2.20.1

[PATCH AUTOSEL 5.4 032/350] drm/komeda: Workaround for broken FLIP_COMPLETE timestamps

[Sasha Levin]

From: Mihail Atanassov <Mihail.Atanassov@arm.com>

[ Upstream commit f59769c52cd7d158df53487ec2936f5592073340 ]

When initially turning a crtc on, drm_reset_vblank_timestamp will
set the vblank timestamp to 0 for any driver that doesn't provide
a ->get_vblank_timestamp() hook.

Unfortunately, the FLIP_COMPLETE event depends on that timestamp,
and the only way to regenerate a valid one is to have vblank
interrupts enabled and have a valid in-ISR call to
drm_crtc_handle_vblank.

Additionally, if the user doesn't request vblanks but _does_ request
FLIP_COMPLETE events, we still don't have a good timestamp: it'll be the
same stamp as the last vblank one.

Work around the issue by always enabling vblanks when the CRTC is on.
Reducing the amount of time that PL0 has to be unmasked would be nice to
fix at a later time.

Changes since v1 [https://patchwork.freedesktop.org/patch/331727/]:
 - moved drm_crtc_vblank_put call to the ->atomic_disable() hook

Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Ayan kumar halder <ayan.halder@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191001142121.13939-1-mihail.atanassov@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/arm/display/komeda/komeda_crtc.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_crtc.c b/drivers/gpu/drm/arm/display/komeda/komeda_crtc.c
index 624d257da20f8..52c42569a111f 100644
--- a/drivers/gpu/drm/arm/display/komeda/komeda_crtc.c
+++ b/drivers/gpu/drm/arm/display/komeda/komeda_crtc.c
@@ -250,6 +250,7 @@ komeda_crtc_atomic_enable(struct drm_crtc *crtc,
 {
 	komeda_crtc_prepare(to_kcrtc(crtc));
 	drm_crtc_vblank_on(crtc);
+	WARN_ON(drm_crtc_vblank_get(crtc));
 	komeda_crtc_do_flush(crtc, old);
 }
 
@@ -319,6 +320,7 @@ komeda_crtc_atomic_disable(struct drm_crtc *crtc,
 		}
 	}
 
+	drm_crtc_vblank_put(crtc);
 	drm_crtc_vblank_off(crtc);
 	komeda_crtc_unprepare(kcrtc);
 }
-- 
2.20.1

[PATCH AUTOSEL 5.4 032/350] drm/komeda: Workaround for broken FLIP_COMPLETE timestamps

[Sasha Levin]

From: Mihail Atanassov <Mihail.Atanassov@arm.com>

[ Upstream commit f59769c52cd7d158df53487ec2936f5592073340 ]

When initially turning a crtc on, drm_reset_vblank_timestamp will
set the vblank timestamp to 0 for any driver that doesn't provide
a ->get_vblank_timestamp() hook.

Unfortunately, the FLIP_COMPLETE event depends on that timestamp,
and the only way to regenerate a valid one is to have vblank
interrupts enabled and have a valid in-ISR call to
drm_crtc_handle_vblank.

Additionally, if the user doesn't request vblanks but _does_ request
FLIP_COMPLETE events, we still don't have a good timestamp: it'll be the
same stamp as the last vblank one.

Work around the issue by always enabling vblanks when the CRTC is on.
Reducing the amount of time that PL0 has to be unmasked would be nice to
fix at a later time.

Changes since v1 [https://patchwork.freedesktop.org/patch/331727/]:
 - moved drm_crtc_vblank_put call to the ->atomic_disable() hook

Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Ayan kumar halder <ayan.halder@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191001142121.13939-1-mihail.atanassov@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/arm/display/komeda/komeda_crtc.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/arm/display/komeda/komeda_crtc.c b/drivers/gpu/drm/arm/display/komeda/komeda_crtc.c
index 624d257da20f8..52c42569a111f 100644
--- a/drivers/gpu/drm/arm/display/komeda/komeda_crtc.c
+++ b/drivers/gpu/drm/arm/display/komeda/komeda_crtc.c
@@ -250,6 +250,7 @@ komeda_crtc_atomic_enable(struct drm_crtc *crtc,
 {
 	komeda_crtc_prepare(to_kcrtc(crtc));
 	drm_crtc_vblank_on(crtc);
+	WARN_ON(drm_crtc_vblank_get(crtc));
 	komeda_crtc_do_flush(crtc, old);
 }
 
@@ -319,6 +320,7 @@ komeda_crtc_atomic_disable(struct drm_crtc *crtc,
 		}
 	}
 
+	drm_crtc_vblank_put(crtc);
 	drm_crtc_vblank_off(crtc);
 	komeda_crtc_unprepare(kcrtc);
 }
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.4 033/350] spi: gpio: prevent memory leak in spi_gpio_probe

[Sasha Levin]

From: Navid Emamdoost <navid.emamdoost@gmail.com>

[ Upstream commit d3b0ffa1d75d5305ebe34735598993afbb8a869d ]

In spi_gpio_probe an SPI master is allocated via spi_alloc_master, but
this controller should be released if devm_add_action_or_reset fails,
otherwise memory leaks. In order to avoid leak spi_contriller_put must
be called in case of failure for devm_add_action_or_reset.

Fixes: 8b797490b4db ("spi: gpio: Make sure spi_master_put() is called in every error path")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Link: https://lore.kernel.org/r/20190930205241.5483-1-navid.emamdoost@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-gpio.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c
index 1d3e23ec20a61..f9c5bbb747142 100644
--- a/drivers/spi/spi-gpio.c
+++ b/drivers/spi/spi-gpio.c
@@ -371,8 +371,10 @@ static int spi_gpio_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	status = devm_add_action_or_reset(&pdev->dev, spi_gpio_put, master);
-	if (status)
+	if (status) {
+		spi_master_put(master);
 		return status;
+	}
 
 	if (of_id)
 		status = spi_gpio_probe_dt(pdev, master);
-- 
2.20.1

[PATCH AUTOSEL 5.4 034/350] media: am437x-vpfe: Setting STD to current value is not an error

[Sasha Levin]

From: Benoit Parrot <bparrot@ti.com>

[ Upstream commit 13aa21cfe92ce9ebb51824029d89f19c33f81419 ]

VIDIOC_S_STD should not return an error if the value is identical
to the current one.
This error was highlighted by the v4l2-compliance test.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/am437x/am437x-vpfe.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/media/platform/am437x/am437x-vpfe.c b/drivers/media/platform/am437x/am437x-vpfe.c
index 2b42ba1f59494..e13dbf27a9c24 100644
--- a/drivers/media/platform/am437x/am437x-vpfe.c
+++ b/drivers/media/platform/am437x/am437x-vpfe.c
@@ -1830,6 +1830,10 @@ static int vpfe_s_std(struct file *file, void *priv, v4l2_std_id std_id)
 	if (!(sdinfo->inputs[0].capabilities & V4L2_IN_CAP_STD))
 		return -ENODATA;
 
+	/* if trying to set the same std then nothing to do */
+	if (vpfe_standards[vpfe->std_index].std_id == std_id)
+		return 0;
+
 	/* If streaming is started, return error */
 	if (vb2_is_busy(&vpfe->buffer_queue)) {
 		vpfe_err(vpfe, "%s device busy\n", __func__);
-- 
2.20.1

[PATCH AUTOSEL 5.4 035/350] media: cedrus: fill in bus_info for media device

[Sasha Levin]

From: Hans Verkuil <hverkuil-cisco@xs4all.nl>

[ Upstream commit ae0688f659adb17ae6ae5710c886b20b5406e5c4 ]

Fixes this compliance warning:

$ v4l2-compliance -m0
v4l2-compliance SHA: b514d615166bdc0901a4c71261b87db31e89f464, 32 bits

Compliance test for cedrus device /dev/media0:

Media Driver Info:
        Driver name      : cedrus
        Model            : cedrus
        Serial           :
        Bus info         :
        Media version    : 5.3.0
        Hardware revision: 0x00000000 (0)
        Driver version   : 5.3.0

Required ioctls:
                warn: v4l2-test-media.cpp(51): empty bus_info
        test MEDIA_IOC_DEVICE_INFO: OK

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/sunxi/cedrus/cedrus.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/staging/media/sunxi/cedrus/cedrus.c b/drivers/staging/media/sunxi/cedrus/cedrus.c
index 2d3ea8b74dfdc..3439f6ad63380 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus.c
@@ -357,6 +357,8 @@ static int cedrus_probe(struct platform_device *pdev)
 
 	dev->mdev.dev = &pdev->dev;
 	strscpy(dev->mdev.model, CEDRUS_NAME, sizeof(dev->mdev.model));
+	strscpy(dev->mdev.bus_info, "platform:" CEDRUS_NAME,
+		sizeof(dev->mdev.bus_info));
 
 	media_device_init(&dev->mdev);
 	dev->mdev.ops = &cedrus_m2m_media_ops;
-- 
2.20.1

[PATCH AUTOSEL 5.4 035/350] media: cedrus: fill in bus_info for media device

[Sasha Levin]

From: Hans Verkuil <hverkuil-cisco@xs4all.nl>

[ Upstream commit ae0688f659adb17ae6ae5710c886b20b5406e5c4 ]

Fixes this compliance warning:

$ v4l2-compliance -m0
v4l2-compliance SHA: b514d615166bdc0901a4c71261b87db31e89f464, 32 bits

Compliance test for cedrus device /dev/media0:

Media Driver Info:
        Driver name      : cedrus
        Model            : cedrus
        Serial           :
        Bus info         :
        Media version    : 5.3.0
        Hardware revision: 0x00000000 (0)
        Driver version   : 5.3.0

Required ioctls:
                warn: v4l2-test-media.cpp(51): empty bus_info
        test MEDIA_IOC_DEVICE_INFO: OK

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/sunxi/cedrus/cedrus.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/staging/media/sunxi/cedrus/cedrus.c b/drivers/staging/media/sunxi/cedrus/cedrus.c
index 2d3ea8b74dfdc..3439f6ad63380 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus.c
@@ -357,6 +357,8 @@ static int cedrus_probe(struct platform_device *pdev)
 
 	dev->mdev.dev = &pdev->dev;
 	strscpy(dev->mdev.model, CEDRUS_NAME, sizeof(dev->mdev.model));
+	strscpy(dev->mdev.bus_info, "platform:" CEDRUS_NAME,
+		sizeof(dev->mdev.bus_info));
 
 	media_device_init(&dev->mdev);
 	dev->mdev.ops = &cedrus_m2m_media_ops;
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 5.4 035/350] media: cedrus: fill in bus_info for media device

[Sasha Levin]

From: Hans Verkuil <hverkuil-cisco@xs4all.nl>

[ Upstream commit ae0688f659adb17ae6ae5710c886b20b5406e5c4 ]

Fixes this compliance warning:

$ v4l2-compliance -m0
v4l2-compliance SHA: b514d615166bdc0901a4c71261b87db31e89f464, 32 bits

Compliance test for cedrus device /dev/media0:

Media Driver Info:
        Driver name      : cedrus
        Model            : cedrus
        Serial           :
        Bus info         :
        Media version    : 5.3.0
        Hardware revision: 0x00000000 (0)
        Driver version   : 5.3.0

Required ioctls:
                warn: v4l2-test-media.cpp(51): empty bus_info
        test MEDIA_IOC_DEVICE_INFO: OK

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/staging/media/sunxi/cedrus/cedrus.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/staging/media/sunxi/cedrus/cedrus.c b/drivers/staging/media/sunxi/cedrus/cedrus.c
index 2d3ea8b74dfdc..3439f6ad63380 100644
--- a/drivers/staging/media/sunxi/cedrus/cedrus.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus.c
@@ -357,6 +357,8 @@ static int cedrus_probe(struct platform_device *pdev)
 
 	dev->mdev.dev = &pdev->dev;
 	strscpy(dev->mdev.model, CEDRUS_NAME, sizeof(dev->mdev.model));
+	strscpy(dev->mdev.bus_info, "platform:" CEDRUS_NAME,
+		sizeof(dev->mdev.bus_info));
 
 	media_device_init(&dev->mdev);
 	dev->mdev.ops = &cedrus_m2m_media_ops;
-- 
2.20.1

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

[PATCH AUTOSEL 5.4 036/350] media: seco-cec: Add a missing 'release_region()' in an error handling path

[Sasha Levin]

From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>

[ Upstream commit a9cc4cbcdfd378b65fd4e398800cfa14e3855042 ]

At the beginning of the probe function, we have a call to
'request_muxed_region(BRA_SMB_BASE_ADDR, 7, "CEC00001")()'

A corresponding 'release_region()' is performed in the remove function but
is lacking in the error handling path.

Add it.

Fixes: b03c2fb97adc ("media: add SECO cec driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/seco-cec/seco-cec.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/platform/seco-cec/seco-cec.c b/drivers/media/platform/seco-cec/seco-cec.c
index 9cd60fe1867c9..a86b6e8f91969 100644
--- a/drivers/media/platform/seco-cec/seco-cec.c
+++ b/drivers/media/platform/seco-cec/seco-cec.c
@@ -675,6 +675,7 @@ err_notifier:
 err_delete_adapter:
 	cec_delete_adapter(secocec->cec_adap);
 err:
+	release_region(BRA_SMB_BASE_ADDR, 7);
 	dev_err(dev, "%s device probe failed\n", dev_name(dev));
 
 	return ret;
-- 
2.20.1

[PATCH AUTOSEL 5.4 037/350] media: vim2m: Fix abort issue

[Sasha Levin]

From: Jernej Skrabec <jernej.skrabec@siol.net>

[ Upstream commit c362f77a243bfd1daec21b6c36491c061ee2f31b ]

Currently, if start streaming -> stop streaming -> start streaming
sequence is executed, driver will end job prematurely, if ctx->translen
is higher than 1, because "aborting" flag is still set from previous
stop streaming command.

Fix that by clearing "aborting" flag in start streaming handler.

Fixes: 96d8eab5d0a1 ("V4L/DVB: [v5,2/2] v4l: Add a mem-to-mem videobuf framework test device")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/vim2m.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/media/platform/vim2m.c b/drivers/media/platform/vim2m.c
index acd3bd48c7e21..2d79cdc130c58 100644
--- a/drivers/media/platform/vim2m.c
+++ b/drivers/media/platform/vim2m.c
@@ -1073,6 +1073,9 @@ static int vim2m_start_streaming(struct vb2_queue *q, unsigned int count)
 	if (!q_data)
 		return -EINVAL;
 
+	if (V4L2_TYPE_IS_OUTPUT(q->type))
+		ctx->aborting = 0;
+
 	q_data->sequence = 0;
 	return 0;
 }
-- 
2.20.1

[PATCH AUTOSEL 5.4 038/350] media: vim2m: Fix BUG_ON in vim2m_device_release()

[Sasha Levin]

From: Kefeng Wang <wangkefeng.wang@huawei.com>

[ Upstream commit 2455d417c03aa0cbafed04c46cbb354643238318 ]

If v4l2_m2m_init() fails, m2m_dev pointer will be set ERR_PTR(-ENOMEM),
then kfree m2m_dev will trigger BUG_ON, see below, fix it by setting m2m_dev
to NULL.

  vim2m vim2m.0: Failed to init mem2mem device
  ------------[ cut here ]------------
  kernel BUG at mm/slub.c:3944!
  invalid opcode: 0000 [#1] SMP PTI
  CPU: 11 PID: 9061 Comm: insmod Tainted: G            E     5.2.0-rc2 #81
  Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
  RIP: 0010:kfree+0x11a/0x160

  Call Trace:
   vim2m_device_release+0x3f/0x50 [vim2m]
   device_release+0x27/0x80
   kobject_release+0x68/0x190
   vim2m_probe+0x20f/0x280 [vim2m]
   platform_drv_probe+0x37/0x90
   really_probe+0xef/0x3d0
   driver_probe_device+0x110/0x120
   device_driver_attach+0x4f/0x60
   __driver_attach+0x9a/0x140
   ? device_driver_attach+0x60/0x60
   bus_for_each_dev+0x76/0xc0
   ? klist_add_tail+0x57/0x70
   bus_add_driver+0x141/0x210
   driver_register+0x5b/0xe0
   vim2m_init+0x29/0x1000 [vim2m]
   do_one_initcall+0x46/0x1f4
   ? __slab_alloc+0x1c/0x30
   ? kmem_cache_alloc_trace+0x167/0x1b0
   do_init_module+0x5b/0x21f
   load_module+0x1add/0x1fb0
   ? __do_sys_finit_module+0xe9/0x110
   __do_sys_finit_module+0xe9/0x110
   do_syscall_64+0x5b/0x1c0
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: ea6c7e34f3b2 ("media: vim2m: replace devm_kzalloc by kzalloc")
Reported-by: Hulk Robot <hulkci@huawei.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/platform/vim2m.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/platform/vim2m.c b/drivers/media/platform/vim2m.c
index 2d79cdc130c58..e17792f837f82 100644
--- a/drivers/media/platform/vim2m.c
+++ b/drivers/media/platform/vim2m.c
@@ -1346,6 +1346,7 @@ static int vim2m_probe(struct platform_device *pdev)
 	if (IS_ERR(dev->m2m_dev)) {
 		v4l2_err(&dev->v4l2_dev, "Failed to init mem2mem device\n");
 		ret = PTR_ERR(dev->m2m_dev);
+		dev->m2m_dev = NULL;
 		goto error_dev;
 	}
 
-- 
2.20.1

[PATCH AUTOSEL 5.4 039/350] media: max2175: Fix build error without CONFIG_REGMAP_I2C

[Sasha Levin]

From: YueHaibing <yuehaibing@huawei.com>

[ Upstream commit 36756fbff1e4a31d71d262ae6a04a20b38efa874 ]

If CONFIG_REGMAP_I2C is not set, building fails:

drivers/media/i2c/max2175.o: In function `max2175_probe':
max2175.c:(.text+0x1404): undefined reference to `__devm_regmap_init_i2c'

Select REGMAP_I2C to fix this.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: b47b79d8a231 ("[media] media: i2c: max2175: Add MAX2175 support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 7eee1812bba36..fcffcc31d168a 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -1113,6 +1113,7 @@ comment "SDR tuner chips"
 config SDR_MAX2175
 	tristate "Maxim 2175 RF to Bits tuner"
 	depends on VIDEO_V4L2 && MEDIA_SDR_SUPPORT && I2C
+	select REGMAP_I2C
 	help
 	  Support for Maxim 2175 tuner. It is an advanced analog/digital
 	  radio receiver with RF-to-Bits front-end designed for SDR solutions.
-- 
2.20.1

[PATCH AUTOSEL 5.4 040/350] media: ov6650: Fix control handler not freed on init error

[Sasha Levin]

From: Janusz Krzysztofik <jmkrzyszt@gmail.com>

[ Upstream commit c404af950d14b71bfbf574a752b6c29d726baaba ]

Since commit afd9690c72c3 ("[media] ov6650: convert to the control
framework"), if an error occurs during initialization of a control
handler, resources possibly allocated to the handler are not freed
before device initialiaton is aborted.  Fix it.

Fixes: afd9690c72c3 ("[media] ov6650: convert to the control framework")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/media/i2c/ov6650.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/media/i2c/ov6650.c b/drivers/media/i2c/ov6650.c
index 5b9af5e5b7f13..68776b0710f98 100644
--- a/drivers/media/i2c/ov6650.c
+++ b/drivers/media/i2c/ov6650.c
@@ -989,8 +989,10 @@ static int ov6650_probe(struct i2c_client *client,
 			V4L2_CID_GAMMA, 0, 0xff, 1, 0x12);
 
 	priv->subdev.ctrl_handler = &priv->hdl;
-	if (priv->hdl.error)
-		return priv->hdl.error;
+	if (priv->hdl.error) {
+		ret = priv->hdl.error;
+		goto ectlhdlfree;
+	}
 
 	v4l2_ctrl_auto_cluster(2, &priv->autogain, 0, true);
 	v4l2_ctrl_auto_cluster(3, &priv->autowb, 0, true);
@@ -1008,8 +1010,10 @@ static int ov6650_probe(struct i2c_client *client,
 	priv->subdev.internal_ops = &ov6650_internal_ops;
 
 	ret = v4l2_async_register_subdev(&priv->subdev);
-	if (ret)
-		v4l2_ctrl_handler_free(&priv->hdl);
+	if (!ret)
+		return 0;
+ectlhdlfree:
+	v4l2_ctrl_handler_free(&priv->hdl);
 
 	return ret;
 }
-- 
2.20.1