All of lore.kernel.org
 help / color / mirror / Atom feed
From: John Crispin <john@phrozen.org>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: ath10k@lists.infradead.org, linux-wireless@vger.kernel.org,
	John Crispin <john@phrozen.org>,
	Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
Subject: [RESEND] ath10k: add tx hw 802.11 encapusaltion offloading support
Date: Mon, 16 Dec 2019 10:22:07 +0100	[thread overview]
Message-ID: <20191216092207.31032-1-john@phrozen.org> (raw)

This patch adds support for ethernet rxtx mode to the driver. The feature
is enabled via a new module parameter. If enabled to driver will enable
the feature on a per vif basis if all other requirements were met.

Testing on a IPQ4019 based hardware shows a increase in TCP throughput
of ~20% when the feature is enabled.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
Signed-off-by: John Crispin <john@phrozen.org>
---
Resending as Johannes has merged the mac80211 part, which means we can now
also merge the driver support patches.

 drivers/net/wireless/ath/ath10k/core.c   | 11 ++++
 drivers/net/wireless/ath/ath10k/core.h   |  3 +
 drivers/net/wireless/ath/ath10k/htt_tx.c | 24 +++++---
 drivers/net/wireless/ath/ath10k/mac.c    | 75 +++++++++++++++++++-----
 drivers/net/wireless/ath/ath10k/txrx.c   | 11 +++-
 5 files changed, 99 insertions(+), 25 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 5ec16ce19b69..99d3d74c0033 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -34,6 +34,7 @@ static bool uart_print;
 static bool skip_otp;
 static bool rawmode;
 static bool fw_diag_log;
+static bool ethernetmode;
 
 unsigned long ath10k_coredump_mask = BIT(ATH10K_FW_CRASH_DUMP_REGISTERS) |
 				     BIT(ATH10K_FW_CRASH_DUMP_CE_DATA);
@@ -46,6 +47,7 @@ module_param(skip_otp, bool, 0644);
 module_param(rawmode, bool, 0644);
 module_param(fw_diag_log, bool, 0644);
 module_param_named(coredump_mask, ath10k_coredump_mask, ulong, 0444);
+module_param(ethernetmode, bool, 0644);
 
 MODULE_PARM_DESC(debug_mask, "Debugging mask");
 MODULE_PARM_DESC(uart_print, "Uart target debugging");
@@ -54,6 +56,7 @@ MODULE_PARM_DESC(cryptmode, "Crypto mode: 0-hardware, 1-software");
 MODULE_PARM_DESC(rawmode, "Use raw 802.11 frame datapath");
 MODULE_PARM_DESC(coredump_mask, "Bitfield of what to include in firmware crash file");
 MODULE_PARM_DESC(fw_diag_log, "Diag based fw log debugging");
+MODULE_PARM_DESC(ethernetmode, "Use ethernet frame datapath");
 
 static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 	{
@@ -3030,6 +3033,14 @@ static void ath10k_core_register_work(struct work_struct *work)
 	/* peer stats are enabled by default */
 	set_bit(ATH10K_FLAG_PEER_STATS, &ar->dev_flags);
 
+	if (ethernetmode && rawmode) {
+		ath10k_err(ar, "ethernet and raw mode cannot co-exist\n");
+		status = -EINVAL;
+		goto err;
+	}
+
+	ar->ethernetmode = ethernetmode;
+
 	status = ath10k_core_probe_fw(ar);
 	if (status) {
 		ath10k_err(ar, "could not probe fw (%d)\n", status);
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 5101bf2b5b15..fe0affbc9d29 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -109,6 +109,7 @@ enum ath10k_skb_flags {
 	ATH10K_SKB_F_MGMT = BIT(3),
 	ATH10K_SKB_F_QOS = BIT(4),
 	ATH10K_SKB_F_RAW_TX = BIT(5),
+	ATH10K_SKB_F_HW_80211_ENCAP = BIT(6),
 };
 
 struct ath10k_skb_cb {
@@ -1222,6 +1223,8 @@ struct ath10k {
 	struct ath10k_bus_params bus_param;
 	struct completion peer_delete_done;
 
+	bool ethernetmode;
+
 	/* must be last */
 	u8 drv_priv[0] __aligned(sizeof(void *));
 };
diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c
index a182c0944cc7..0ca0705fe69a 100644
--- a/drivers/net/wireless/ath/ath10k/htt_tx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -1144,6 +1144,10 @@ static u8 ath10k_htt_tx_get_tid(struct sk_buff *skb, bool is_eth)
 	struct ieee80211_hdr *hdr = (void *)skb->data;
 	struct ath10k_skb_cb *cb = ATH10K_SKB_CB(skb);
 
+	/* Firmware takes care of tid classification for ethernet format */
+	if (cb->flags & ATH10K_SKB_F_HW_80211_ENCAP)
+		return skb->priority % IEEE80211_QOS_CTL_TID_MASK;
+
 	if (!is_eth && ieee80211_is_mgmt(hdr->frame_control))
 		return HTT_DATA_TX_EXT_TID_MGMT;
 	else if (cb->flags & ATH10K_SKB_F_QOS)
@@ -1378,15 +1382,17 @@ static int ath10k_htt_tx_32(struct ath10k_htt *htt,
 	txbuf_paddr = htt->txbuf.paddr +
 		      (sizeof(struct ath10k_htt_txbuf_32) * msdu_id);
 
-	if ((ieee80211_is_action(hdr->frame_control) ||
-	     ieee80211_is_deauth(hdr->frame_control) ||
-	     ieee80211_is_disassoc(hdr->frame_control)) &&
-	     ieee80211_has_protected(hdr->frame_control)) {
-		skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
-	} else if (!(skb_cb->flags & ATH10K_SKB_F_NO_HWCRYPT) &&
-		   txmode == ATH10K_HW_TXRX_RAW &&
-		   ieee80211_has_protected(hdr->frame_control)) {
-		skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
+	if (!(info->control.flags & IEEE80211_TX_CTRL_HW_80211_ENCAP)) {
+		if ((ieee80211_is_action(hdr->frame_control) ||
+		     ieee80211_is_deauth(hdr->frame_control) ||
+		     ieee80211_is_disassoc(hdr->frame_control)) &&
+		    ieee80211_has_protected(hdr->frame_control)) {
+			skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
+		} else if (!(skb_cb->flags & ATH10K_SKB_F_NO_HWCRYPT) &&
+			   txmode == ATH10K_HW_TXRX_RAW &&
+			   ieee80211_has_protected(hdr->frame_control)) {
+			skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
+		}
 	}
 
 	skb_cb->paddr = dma_map_single(dev, msdu->data, msdu->len,
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 767c7bf16975..a7a6a8330d6a 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3427,12 +3427,16 @@ ath10k_mac_tx_h_get_txmode(struct ath10k *ar,
 			   struct sk_buff *skb)
 {
 	const struct ieee80211_hdr *hdr = (void *)skb->data;
+	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 	const struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(skb);
 	__le16 fc = hdr->frame_control;
 
 	if (!vif || vif->type == NL80211_IFTYPE_MONITOR)
 		return ATH10K_HW_TXRX_RAW;
 
+	if (tx_info->control.flags & IEEE80211_TX_CTRL_HW_80211_ENCAP)
+		return ATH10K_HW_TXRX_ETHERNET;
+
 	if (ieee80211_is_mgmt(fc))
 		return ATH10K_HW_TXRX_MGMT;
 
@@ -3585,6 +3589,15 @@ static void ath10k_mac_tx_h_fill_cb(struct ath10k *ar,
 			ieee80211_is_data_qos(hdr->frame_control);
 
 	cb->flags = 0;
+	cb->vif = vif;
+	cb->txq = txq;
+	cb->airtime_est = airtime;
+
+	if (info->control.flags & IEEE80211_TX_CTRL_HW_80211_ENCAP) {
+		cb->flags |= ATH10K_SKB_F_HW_80211_ENCAP;
+		return;
+	}
+
 	if (!ath10k_tx_h_use_hwcrypto(vif, skb))
 		cb->flags |= ATH10K_SKB_F_NO_HWCRYPT;
 
@@ -3603,10 +3616,6 @@ static void ath10k_mac_tx_h_fill_cb(struct ath10k *ar,
 		cb->flags |= ATH10K_SKB_F_NO_HWCRYPT;
 		cb->flags |= ATH10K_SKB_F_RAW_TX;
 	}
-
-	cb->vif = vif;
-	cb->txq = txq;
-	cb->airtime_est = airtime;
 }
 
 bool ath10k_mac_tx_frm_has_freq(struct ath10k *ar)
@@ -3716,6 +3725,9 @@ static int ath10k_mac_tx(struct ath10k *ar,
 	const struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(skb);
 	int ret;
 
+	if (info->control.flags & IEEE80211_TX_CTRL_HW_80211_ENCAP)
+		goto skip_encap;
+
 	/* We should disable CCK RATE due to P2P */
 	if (info->flags & IEEE80211_TX_CTL_NO_CCK_RATE)
 		ath10k_dbg(ar, ATH10K_DBG_MAC, "IEEE80211_TX_CTL_NO_CCK_RATE\n");
@@ -3739,6 +3751,7 @@ static int ath10k_mac_tx(struct ath10k *ar,
 		}
 	}
 
+skip_encap:
 	if (!noque_offchan && info->flags & IEEE80211_TX_CTL_TX_OFFCHAN) {
 		if (!ath10k_mac_tx_frm_has_freq(ar)) {
 			ath10k_dbg(ar, ATH10K_DBG_MAC, "mac queued offchannel skb %pK len %d\n",
@@ -3788,6 +3801,7 @@ void ath10k_offchan_tx_work(struct work_struct *work)
 	int ret;
 	unsigned long time_left;
 	bool tmp_peer_created = false;
+	struct ieee80211_tx_info *info;
 
 	/* FW requirement: We must create a peer before FW will send out
 	 * an offchannel frame. Otherwise the frame will be stuck and
@@ -3807,8 +3821,14 @@ void ath10k_offchan_tx_work(struct work_struct *work)
 		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac offchannel skb %pK len %d\n",
 			   skb, skb->len);
 
-		hdr = (struct ieee80211_hdr *)skb->data;
-		peer_addr = ieee80211_get_DA(hdr);
+		info = IEEE80211_SKB_CB(skb);
+
+		if (info->control.flags & IEEE80211_TX_CTRL_HW_80211_ENCAP) {
+			peer_addr = skb->data;
+		} else {
+			hdr = (struct ieee80211_hdr *)skb->data;
+			peer_addr = ieee80211_get_DA(hdr);
+		}
 
 		spin_lock_bh(&ar->data_lock);
 		vdev_id = ar->scan.vdev_id;
@@ -4338,7 +4358,7 @@ static void ath10k_mac_op_tx(struct ieee80211_hw *hw,
 	struct ieee80211_vif *vif = info->control.vif;
 	struct ieee80211_sta *sta = control->sta;
 	struct ieee80211_txq *txq = NULL;
-	struct ieee80211_hdr *hdr = (void *)skb->data;
+	struct ieee80211_hdr *hdr;
 	enum ath10k_hw_txrx_mode txmode;
 	enum ath10k_mac_tx_path txpath;
 	bool is_htt;
@@ -4369,14 +4389,20 @@ static void ath10k_mac_op_tx(struct ieee80211_hw *hw,
 			return;
 		}
 
-		ret = ath10k_htt_tx_mgmt_inc_pending(htt, is_mgmt, is_presp);
-		if (ret) {
-			ath10k_dbg(ar, ATH10K_DBG_MAC, "failed to increase tx mgmt pending count: %d, dropping\n",
-				   ret);
-			ath10k_htt_tx_dec_pending(htt);
-			spin_unlock_bh(&ar->htt.tx_lock);
-			ieee80211_free_txskb(ar->hw, skb);
-			return;
+		if (is_mgmt) {
+			hdr = (struct ieee80211_hdr *)skb->data;
+			is_presp = ieee80211_is_probe_resp(hdr->frame_control);
+
+			ret = ath10k_htt_tx_mgmt_inc_pending(htt, is_mgmt,
+							     is_presp);
+			if (ret) {
+				ath10k_dbg(ar, ATH10K_DBG_MAC, "failed to increase tx mgmt pending count: %d, dropping\n",
+					   ret);
+				ath10k_htt_tx_dec_pending(htt);
+				spin_unlock_bh(&ar->htt.tx_lock);
+				ieee80211_free_txskb(ar->hw, skb);
+				return;
+			}
 		}
 		spin_unlock_bh(&ar->htt.tx_lock);
 	}
@@ -5209,10 +5235,12 @@ static int ath10k_mac_set_txbf_conf(struct ath10k_vif *arvif)
 static int ath10k_add_interface(struct ieee80211_hw *hw,
 				struct ieee80211_vif *vif)
 {
+	struct wireless_dev *wdev = ieee80211_vif_to_wdev(vif);
 	struct ath10k *ar = hw->priv;
 	struct ath10k_vif *arvif = (void *)vif->drv_priv;
 	struct ath10k_peer *peer;
 	enum wmi_sta_powersave_param param;
+	int hw_encap = 0;
 	int ret = 0;
 	u32 value;
 	int bit;
@@ -5304,6 +5332,21 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 		break;
 	}
 
+	switch (vif->type) {
+	case NL80211_IFTYPE_STATION:
+	case NL80211_IFTYPE_AP_VLAN:
+		if (wdev->netdev->ieee80211_ptr->use_4addr)
+			break;
+	/* fall through */
+	case NL80211_IFTYPE_AP:
+		hw_encap = 1;
+		break;
+	default:
+		break;
+	}
+
+	ieee80211_set_hw_80211_encap(vif, ar->ethernetmode & hw_encap);
+
 	/* Using vdev_id as queue number will make it very easy to do per-vif
 	 * tx queue locking. This shouldn't wrap due to interface combinations
 	 * but do a modulo for correctness sake and prevent using offchannel tx
@@ -8883,6 +8926,8 @@ int ath10k_mac_register(struct ath10k *ar)
 	ieee80211_hw_set(ar->hw, QUEUE_CONTROL);
 	ieee80211_hw_set(ar->hw, SUPPORTS_TX_FRAG);
 	ieee80211_hw_set(ar->hw, REPORTS_LOW_ACK);
+	if (ar->ethernetmode)
+		ieee80211_hw_set(ar->hw, SUPPORTS_80211_ENCAP);
 
 	if (!test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags))
 		ieee80211_hw_set(ar->hw, SW_CRYPTO_CONTROL);
diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c
index 39abf8b12903..1d8a6c2571a1 100644
--- a/drivers/net/wireless/ath/ath10k/txrx.c
+++ b/drivers/net/wireless/ath/ath10k/txrx.c
@@ -50,6 +50,8 @@ int ath10k_txrx_tx_unref(struct ath10k_htt *htt,
 	struct ath10k_skb_cb *skb_cb;
 	struct ath10k_txq *artxq;
 	struct sk_buff *msdu;
+	struct ieee80211_vif *vif;
+	u8 flags;
 
 	ath10k_dbg(ar, ATH10K_DBG_HTT,
 		   "htt tx completion msdu_id %u status %d\n",
@@ -78,6 +80,9 @@ int ath10k_txrx_tx_unref(struct ath10k_htt *htt,
 		artxq->num_fw_queued--;
 	}
 
+	flags = skb_cb->flags;
+	vif = skb_cb->vif;
+
 	ath10k_htt_tx_free_msdu_id(htt, tx_done->msdu_id);
 	ath10k_htt_tx_dec_pending(htt);
 	if (htt->num_pending_tx == 0)
@@ -123,7 +128,11 @@ int ath10k_txrx_tx_unref(struct ath10k_htt *htt,
 		info->status.is_valid_ack_signal = true;
 	}
 
-	ieee80211_tx_status(htt->ar->hw, msdu);
+	if (flags & ATH10K_SKB_F_HW_80211_ENCAP)
+		ieee80211_tx_status_8023(htt->ar->hw, vif, msdu);
+	else
+		ieee80211_tx_status(htt->ar->hw, msdu);
+
 	/* we do not own the msdu anymore */
 
 	return 0;
-- 
2.20.1


WARNING: multiple messages have this Message-ID (diff)
From: John Crispin <john@phrozen.org>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>,
	linux-wireless@vger.kernel.org, ath10k@lists.infradead.org,
	John Crispin <john@phrozen.org>
Subject: [RESEND] ath10k: add tx hw 802.11 encapusaltion offloading support
Date: Mon, 16 Dec 2019 10:22:07 +0100	[thread overview]
Message-ID: <20191216092207.31032-1-john@phrozen.org> (raw)

This patch adds support for ethernet rxtx mode to the driver. The feature
is enabled via a new module parameter. If enabled to driver will enable
the feature on a per vif basis if all other requirements were met.

Testing on a IPQ4019 based hardware shows a increase in TCP throughput
of ~20% when the feature is enabled.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
Signed-off-by: John Crispin <john@phrozen.org>
---
Resending as Johannes has merged the mac80211 part, which means we can now
also merge the driver support patches.

 drivers/net/wireless/ath/ath10k/core.c   | 11 ++++
 drivers/net/wireless/ath/ath10k/core.h   |  3 +
 drivers/net/wireless/ath/ath10k/htt_tx.c | 24 +++++---
 drivers/net/wireless/ath/ath10k/mac.c    | 75 +++++++++++++++++++-----
 drivers/net/wireless/ath/ath10k/txrx.c   | 11 +++-
 5 files changed, 99 insertions(+), 25 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index 5ec16ce19b69..99d3d74c0033 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -34,6 +34,7 @@ static bool uart_print;
 static bool skip_otp;
 static bool rawmode;
 static bool fw_diag_log;
+static bool ethernetmode;
 
 unsigned long ath10k_coredump_mask = BIT(ATH10K_FW_CRASH_DUMP_REGISTERS) |
 				     BIT(ATH10K_FW_CRASH_DUMP_CE_DATA);
@@ -46,6 +47,7 @@ module_param(skip_otp, bool, 0644);
 module_param(rawmode, bool, 0644);
 module_param(fw_diag_log, bool, 0644);
 module_param_named(coredump_mask, ath10k_coredump_mask, ulong, 0444);
+module_param(ethernetmode, bool, 0644);
 
 MODULE_PARM_DESC(debug_mask, "Debugging mask");
 MODULE_PARM_DESC(uart_print, "Uart target debugging");
@@ -54,6 +56,7 @@ MODULE_PARM_DESC(cryptmode, "Crypto mode: 0-hardware, 1-software");
 MODULE_PARM_DESC(rawmode, "Use raw 802.11 frame datapath");
 MODULE_PARM_DESC(coredump_mask, "Bitfield of what to include in firmware crash file");
 MODULE_PARM_DESC(fw_diag_log, "Diag based fw log debugging");
+MODULE_PARM_DESC(ethernetmode, "Use ethernet frame datapath");
 
 static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 	{
@@ -3030,6 +3033,14 @@ static void ath10k_core_register_work(struct work_struct *work)
 	/* peer stats are enabled by default */
 	set_bit(ATH10K_FLAG_PEER_STATS, &ar->dev_flags);
 
+	if (ethernetmode && rawmode) {
+		ath10k_err(ar, "ethernet and raw mode cannot co-exist\n");
+		status = -EINVAL;
+		goto err;
+	}
+
+	ar->ethernetmode = ethernetmode;
+
 	status = ath10k_core_probe_fw(ar);
 	if (status) {
 		ath10k_err(ar, "could not probe fw (%d)\n", status);
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index 5101bf2b5b15..fe0affbc9d29 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -109,6 +109,7 @@ enum ath10k_skb_flags {
 	ATH10K_SKB_F_MGMT = BIT(3),
 	ATH10K_SKB_F_QOS = BIT(4),
 	ATH10K_SKB_F_RAW_TX = BIT(5),
+	ATH10K_SKB_F_HW_80211_ENCAP = BIT(6),
 };
 
 struct ath10k_skb_cb {
@@ -1222,6 +1223,8 @@ struct ath10k {
 	struct ath10k_bus_params bus_param;
 	struct completion peer_delete_done;
 
+	bool ethernetmode;
+
 	/* must be last */
 	u8 drv_priv[0] __aligned(sizeof(void *));
 };
diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c
index a182c0944cc7..0ca0705fe69a 100644
--- a/drivers/net/wireless/ath/ath10k/htt_tx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_tx.c
@@ -1144,6 +1144,10 @@ static u8 ath10k_htt_tx_get_tid(struct sk_buff *skb, bool is_eth)
 	struct ieee80211_hdr *hdr = (void *)skb->data;
 	struct ath10k_skb_cb *cb = ATH10K_SKB_CB(skb);
 
+	/* Firmware takes care of tid classification for ethernet format */
+	if (cb->flags & ATH10K_SKB_F_HW_80211_ENCAP)
+		return skb->priority % IEEE80211_QOS_CTL_TID_MASK;
+
 	if (!is_eth && ieee80211_is_mgmt(hdr->frame_control))
 		return HTT_DATA_TX_EXT_TID_MGMT;
 	else if (cb->flags & ATH10K_SKB_F_QOS)
@@ -1378,15 +1382,17 @@ static int ath10k_htt_tx_32(struct ath10k_htt *htt,
 	txbuf_paddr = htt->txbuf.paddr +
 		      (sizeof(struct ath10k_htt_txbuf_32) * msdu_id);
 
-	if ((ieee80211_is_action(hdr->frame_control) ||
-	     ieee80211_is_deauth(hdr->frame_control) ||
-	     ieee80211_is_disassoc(hdr->frame_control)) &&
-	     ieee80211_has_protected(hdr->frame_control)) {
-		skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
-	} else if (!(skb_cb->flags & ATH10K_SKB_F_NO_HWCRYPT) &&
-		   txmode == ATH10K_HW_TXRX_RAW &&
-		   ieee80211_has_protected(hdr->frame_control)) {
-		skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
+	if (!(info->control.flags & IEEE80211_TX_CTRL_HW_80211_ENCAP)) {
+		if ((ieee80211_is_action(hdr->frame_control) ||
+		     ieee80211_is_deauth(hdr->frame_control) ||
+		     ieee80211_is_disassoc(hdr->frame_control)) &&
+		    ieee80211_has_protected(hdr->frame_control)) {
+			skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
+		} else if (!(skb_cb->flags & ATH10K_SKB_F_NO_HWCRYPT) &&
+			   txmode == ATH10K_HW_TXRX_RAW &&
+			   ieee80211_has_protected(hdr->frame_control)) {
+			skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
+		}
 	}
 
 	skb_cb->paddr = dma_map_single(dev, msdu->data, msdu->len,
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 767c7bf16975..a7a6a8330d6a 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -3427,12 +3427,16 @@ ath10k_mac_tx_h_get_txmode(struct ath10k *ar,
 			   struct sk_buff *skb)
 {
 	const struct ieee80211_hdr *hdr = (void *)skb->data;
+	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 	const struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(skb);
 	__le16 fc = hdr->frame_control;
 
 	if (!vif || vif->type == NL80211_IFTYPE_MONITOR)
 		return ATH10K_HW_TXRX_RAW;
 
+	if (tx_info->control.flags & IEEE80211_TX_CTRL_HW_80211_ENCAP)
+		return ATH10K_HW_TXRX_ETHERNET;
+
 	if (ieee80211_is_mgmt(fc))
 		return ATH10K_HW_TXRX_MGMT;
 
@@ -3585,6 +3589,15 @@ static void ath10k_mac_tx_h_fill_cb(struct ath10k *ar,
 			ieee80211_is_data_qos(hdr->frame_control);
 
 	cb->flags = 0;
+	cb->vif = vif;
+	cb->txq = txq;
+	cb->airtime_est = airtime;
+
+	if (info->control.flags & IEEE80211_TX_CTRL_HW_80211_ENCAP) {
+		cb->flags |= ATH10K_SKB_F_HW_80211_ENCAP;
+		return;
+	}
+
 	if (!ath10k_tx_h_use_hwcrypto(vif, skb))
 		cb->flags |= ATH10K_SKB_F_NO_HWCRYPT;
 
@@ -3603,10 +3616,6 @@ static void ath10k_mac_tx_h_fill_cb(struct ath10k *ar,
 		cb->flags |= ATH10K_SKB_F_NO_HWCRYPT;
 		cb->flags |= ATH10K_SKB_F_RAW_TX;
 	}
-
-	cb->vif = vif;
-	cb->txq = txq;
-	cb->airtime_est = airtime;
 }
 
 bool ath10k_mac_tx_frm_has_freq(struct ath10k *ar)
@@ -3716,6 +3725,9 @@ static int ath10k_mac_tx(struct ath10k *ar,
 	const struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(skb);
 	int ret;
 
+	if (info->control.flags & IEEE80211_TX_CTRL_HW_80211_ENCAP)
+		goto skip_encap;
+
 	/* We should disable CCK RATE due to P2P */
 	if (info->flags & IEEE80211_TX_CTL_NO_CCK_RATE)
 		ath10k_dbg(ar, ATH10K_DBG_MAC, "IEEE80211_TX_CTL_NO_CCK_RATE\n");
@@ -3739,6 +3751,7 @@ static int ath10k_mac_tx(struct ath10k *ar,
 		}
 	}
 
+skip_encap:
 	if (!noque_offchan && info->flags & IEEE80211_TX_CTL_TX_OFFCHAN) {
 		if (!ath10k_mac_tx_frm_has_freq(ar)) {
 			ath10k_dbg(ar, ATH10K_DBG_MAC, "mac queued offchannel skb %pK len %d\n",
@@ -3788,6 +3801,7 @@ void ath10k_offchan_tx_work(struct work_struct *work)
 	int ret;
 	unsigned long time_left;
 	bool tmp_peer_created = false;
+	struct ieee80211_tx_info *info;
 
 	/* FW requirement: We must create a peer before FW will send out
 	 * an offchannel frame. Otherwise the frame will be stuck and
@@ -3807,8 +3821,14 @@ void ath10k_offchan_tx_work(struct work_struct *work)
 		ath10k_dbg(ar, ATH10K_DBG_MAC, "mac offchannel skb %pK len %d\n",
 			   skb, skb->len);
 
-		hdr = (struct ieee80211_hdr *)skb->data;
-		peer_addr = ieee80211_get_DA(hdr);
+		info = IEEE80211_SKB_CB(skb);
+
+		if (info->control.flags & IEEE80211_TX_CTRL_HW_80211_ENCAP) {
+			peer_addr = skb->data;
+		} else {
+			hdr = (struct ieee80211_hdr *)skb->data;
+			peer_addr = ieee80211_get_DA(hdr);
+		}
 
 		spin_lock_bh(&ar->data_lock);
 		vdev_id = ar->scan.vdev_id;
@@ -4338,7 +4358,7 @@ static void ath10k_mac_op_tx(struct ieee80211_hw *hw,
 	struct ieee80211_vif *vif = info->control.vif;
 	struct ieee80211_sta *sta = control->sta;
 	struct ieee80211_txq *txq = NULL;
-	struct ieee80211_hdr *hdr = (void *)skb->data;
+	struct ieee80211_hdr *hdr;
 	enum ath10k_hw_txrx_mode txmode;
 	enum ath10k_mac_tx_path txpath;
 	bool is_htt;
@@ -4369,14 +4389,20 @@ static void ath10k_mac_op_tx(struct ieee80211_hw *hw,
 			return;
 		}
 
-		ret = ath10k_htt_tx_mgmt_inc_pending(htt, is_mgmt, is_presp);
-		if (ret) {
-			ath10k_dbg(ar, ATH10K_DBG_MAC, "failed to increase tx mgmt pending count: %d, dropping\n",
-				   ret);
-			ath10k_htt_tx_dec_pending(htt);
-			spin_unlock_bh(&ar->htt.tx_lock);
-			ieee80211_free_txskb(ar->hw, skb);
-			return;
+		if (is_mgmt) {
+			hdr = (struct ieee80211_hdr *)skb->data;
+			is_presp = ieee80211_is_probe_resp(hdr->frame_control);
+
+			ret = ath10k_htt_tx_mgmt_inc_pending(htt, is_mgmt,
+							     is_presp);
+			if (ret) {
+				ath10k_dbg(ar, ATH10K_DBG_MAC, "failed to increase tx mgmt pending count: %d, dropping\n",
+					   ret);
+				ath10k_htt_tx_dec_pending(htt);
+				spin_unlock_bh(&ar->htt.tx_lock);
+				ieee80211_free_txskb(ar->hw, skb);
+				return;
+			}
 		}
 		spin_unlock_bh(&ar->htt.tx_lock);
 	}
@@ -5209,10 +5235,12 @@ static int ath10k_mac_set_txbf_conf(struct ath10k_vif *arvif)
 static int ath10k_add_interface(struct ieee80211_hw *hw,
 				struct ieee80211_vif *vif)
 {
+	struct wireless_dev *wdev = ieee80211_vif_to_wdev(vif);
 	struct ath10k *ar = hw->priv;
 	struct ath10k_vif *arvif = (void *)vif->drv_priv;
 	struct ath10k_peer *peer;
 	enum wmi_sta_powersave_param param;
+	int hw_encap = 0;
 	int ret = 0;
 	u32 value;
 	int bit;
@@ -5304,6 +5332,21 @@ static int ath10k_add_interface(struct ieee80211_hw *hw,
 		break;
 	}
 
+	switch (vif->type) {
+	case NL80211_IFTYPE_STATION:
+	case NL80211_IFTYPE_AP_VLAN:
+		if (wdev->netdev->ieee80211_ptr->use_4addr)
+			break;
+	/* fall through */
+	case NL80211_IFTYPE_AP:
+		hw_encap = 1;
+		break;
+	default:
+		break;
+	}
+
+	ieee80211_set_hw_80211_encap(vif, ar->ethernetmode & hw_encap);
+
 	/* Using vdev_id as queue number will make it very easy to do per-vif
 	 * tx queue locking. This shouldn't wrap due to interface combinations
 	 * but do a modulo for correctness sake and prevent using offchannel tx
@@ -8883,6 +8926,8 @@ int ath10k_mac_register(struct ath10k *ar)
 	ieee80211_hw_set(ar->hw, QUEUE_CONTROL);
 	ieee80211_hw_set(ar->hw, SUPPORTS_TX_FRAG);
 	ieee80211_hw_set(ar->hw, REPORTS_LOW_ACK);
+	if (ar->ethernetmode)
+		ieee80211_hw_set(ar->hw, SUPPORTS_80211_ENCAP);
 
 	if (!test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags))
 		ieee80211_hw_set(ar->hw, SW_CRYPTO_CONTROL);
diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c
index 39abf8b12903..1d8a6c2571a1 100644
--- a/drivers/net/wireless/ath/ath10k/txrx.c
+++ b/drivers/net/wireless/ath/ath10k/txrx.c
@@ -50,6 +50,8 @@ int ath10k_txrx_tx_unref(struct ath10k_htt *htt,
 	struct ath10k_skb_cb *skb_cb;
 	struct ath10k_txq *artxq;
 	struct sk_buff *msdu;
+	struct ieee80211_vif *vif;
+	u8 flags;
 
 	ath10k_dbg(ar, ATH10K_DBG_HTT,
 		   "htt tx completion msdu_id %u status %d\n",
@@ -78,6 +80,9 @@ int ath10k_txrx_tx_unref(struct ath10k_htt *htt,
 		artxq->num_fw_queued--;
 	}
 
+	flags = skb_cb->flags;
+	vif = skb_cb->vif;
+
 	ath10k_htt_tx_free_msdu_id(htt, tx_done->msdu_id);
 	ath10k_htt_tx_dec_pending(htt);
 	if (htt->num_pending_tx == 0)
@@ -123,7 +128,11 @@ int ath10k_txrx_tx_unref(struct ath10k_htt *htt,
 		info->status.is_valid_ack_signal = true;
 	}
 
-	ieee80211_tx_status(htt->ar->hw, msdu);
+	if (flags & ATH10K_SKB_F_HW_80211_ENCAP)
+		ieee80211_tx_status_8023(htt->ar->hw, vif, msdu);
+	else
+		ieee80211_tx_status(htt->ar->hw, msdu);
+
 	/* we do not own the msdu anymore */
 
 	return 0;
-- 
2.20.1


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

             reply	other threads:[~2019-12-16  9:22 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-16  9:22 John Crispin [this message]
2019-12-16  9:22 ` [RESEND] ath10k: add tx hw 802.11 encapusaltion offloading support John Crispin
2019-12-17 15:29 ` Kalle Valo
2019-12-17 15:30 ` Kalle Valo
2019-12-18 20:14   ` Tom Psyborg
2019-12-18 20:14     ` Tom Psyborg
2019-12-18 22:45     ` Tom Psyborg
2019-12-18 22:45       ` Tom Psyborg
2019-12-18 23:18       ` John Crispin
2019-12-18 23:18         ` John Crispin
2019-12-28  3:21         ` Tom Psyborg
2019-12-28  3:21           ` Tom Psyborg
2019-12-19  6:36       ` Sebastian Gottschall
2019-12-19  6:36         ` Sebastian Gottschall
2019-12-19 10:31         ` Tom Psyborg
2019-12-19 10:31           ` Tom Psyborg
2019-12-19 10:44           ` Sebastian Gottschall
2019-12-19 10:44             ` Sebastian Gottschall
2019-12-19 14:39             ` Tom Psyborg
2019-12-19 14:39               ` Tom Psyborg
2020-02-13 16:18     ` Kalle Valo
2020-02-13 16:18       ` Kalle Valo
2019-12-28  4:45 ` Justin Capella
2019-12-28  4:45   ` Justin Capella

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191216092207.31032-1-john@phrozen.org \
    --to=john@phrozen.org \
    --cc=ath10k@lists.infradead.org \
    --cc=kvalo@codeaurora.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=vthiagar@qti.qualcomm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.