All of lore.kernel.org
 help / color / mirror / Atom feed
From: Julian Wiedmann <jwi@linux.ibm.com>
To: David Miller <davem@davemloft.net>
Cc: <netdev@vger.kernel.org>, <linux-s390@vger.kernel.org>,
	Heiko Carstens <heiko.carstens@de.ibm.com>,
	Stefan Raspl <raspl@linux.ibm.com>,
	Ursula Braun <ubraun@linux.ibm.com>,
	Julian Wiedmann <jwi@linux.ibm.com>
Subject: [PATCH net 1/3] s390/qeth: handle error due to unsupported transport mode
Date: Wed, 18 Dec 2019 16:32:26 +0100	[thread overview]
Message-ID: <20191218153228.29908-2-jwi@linux.ibm.com> (raw)
In-Reply-To: <20191218153228.29908-1-jwi@linux.ibm.com>

Along with z/VM NICs, there's additional device types that only support
a specific transport mode (eg. external-bridged IQD).
Identify the corresponding error code, and raise a fitting error message
so that the user knows to adjust their device configuration.

On top of that also fix the subsequent error path, so that the rejected
cmd doesn't need to wait for a timeout but gets cancelled straight away.

Fixes: 4a71df50047f ("qeth: new qeth device driver")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
---
 drivers/s390/net/qeth_core_main.c | 14 +++++++-------
 drivers/s390/net/qeth_core_mpc.h  |  5 +++++
 2 files changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index b9a2349e4b90..bb406eacef82 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -655,17 +655,17 @@ static int qeth_check_idx_response(struct qeth_card *card,
 	unsigned char *buffer)
 {
 	QETH_DBF_HEX(CTRL, 2, buffer, QETH_DBF_CTRL_LEN);
-	if ((buffer[2] & 0xc0) == 0xc0) {
+	if ((buffer[2] & QETH_IDX_TERMINATE_MASK) == QETH_IDX_TERMINATE) {
 		QETH_DBF_MESSAGE(2, "received an IDX TERMINATE with cause code %#04x\n",
 				 buffer[4]);
 		QETH_CARD_TEXT(card, 2, "ckidxres");
 		QETH_CARD_TEXT(card, 2, " idxterm");
-		QETH_CARD_TEXT_(card, 2, "  rc%d", -EIO);
-		if (buffer[4] == 0xf6) {
+		QETH_CARD_TEXT_(card, 2, "rc%x", buffer[4]);
+		if (buffer[4] == QETH_IDX_TERM_BAD_TRANSPORT ||
+		    buffer[4] == QETH_IDX_TERM_BAD_TRANSPORT_VM) {
 			dev_err(&card->gdev->dev,
-			"The qeth device is not configured "
-			"for the OSI layer required by z/VM\n");
-			return -EPERM;
+				"The device does not support the configured transport mode\n");
+			return -EPROTONOSUPPORT;
 		}
 		return -EIO;
 	}
@@ -742,10 +742,10 @@ static void qeth_issue_next_read_cb(struct qeth_card *card,
 	case 0:
 		break;
 	case -EIO:
-		qeth_clear_ipacmd_list(card);
 		qeth_schedule_recovery(card);
 		/* fall through */
 	default:
+		qeth_clear_ipacmd_list(card);
 		goto out;
 	}
 
diff --git a/drivers/s390/net/qeth_core_mpc.h b/drivers/s390/net/qeth_core_mpc.h
index 88f4dc140751..6f5290fabd2c 100644
--- a/drivers/s390/net/qeth_core_mpc.h
+++ b/drivers/s390/net/qeth_core_mpc.h
@@ -899,6 +899,11 @@ extern unsigned char IDX_ACTIVATE_WRITE[];
 #define QETH_IDX_ACT_ERR_AUTH		0x1E
 #define QETH_IDX_ACT_ERR_AUTH_USER	0x20
 
+#define QETH_IDX_TERMINATE		0xc0
+#define QETH_IDX_TERMINATE_MASK		0xc0
+#define QETH_IDX_TERM_BAD_TRANSPORT	0x41
+#define QETH_IDX_TERM_BAD_TRANSPORT_VM	0xf6
+
 #define PDU_ENCAPSULATION(buffer) \
 	(buffer + *(buffer + (*(buffer + 0x0b)) + \
 	 *(buffer + *(buffer + 0x0b) + 0x11) + 0x07))
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Julian Wiedmann <jwi@linux.ibm.com>
To: David Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org, linux-s390@vger.kernel.org,
	Heiko Carstens <heiko.carstens@de.ibm.com>,
	Stefan Raspl <raspl@linux.ibm.com>,
	Ursula Braun <ubraun@linux.ibm.com>,
	Julian Wiedmann <jwi@linux.ibm.com>
Subject: [PATCH net 1/3] s390/qeth: handle error due to unsupported transport mode
Date: Wed, 18 Dec 2019 16:32:26 +0100	[thread overview]
Message-ID: <20191218153228.29908-2-jwi@linux.ibm.com> (raw)
In-Reply-To: <20191218153228.29908-1-jwi@linux.ibm.com>

Along with z/VM NICs, there's additional device types that only support
a specific transport mode (eg. external-bridged IQD).
Identify the corresponding error code, and raise a fitting error message
so that the user knows to adjust their device configuration.

On top of that also fix the subsequent error path, so that the rejected
cmd doesn't need to wait for a timeout but gets cancelled straight away.

Fixes: 4a71df50047f ("qeth: new qeth device driver")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
---
 drivers/s390/net/qeth_core_main.c | 14 +++++++-------
 drivers/s390/net/qeth_core_mpc.h  |  5 +++++
 2 files changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index b9a2349e4b90..bb406eacef82 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -655,17 +655,17 @@ static int qeth_check_idx_response(struct qeth_card *card,
 	unsigned char *buffer)
 {
 	QETH_DBF_HEX(CTRL, 2, buffer, QETH_DBF_CTRL_LEN);
-	if ((buffer[2] & 0xc0) == 0xc0) {
+	if ((buffer[2] & QETH_IDX_TERMINATE_MASK) == QETH_IDX_TERMINATE) {
 		QETH_DBF_MESSAGE(2, "received an IDX TERMINATE with cause code %#04x\n",
 				 buffer[4]);
 		QETH_CARD_TEXT(card, 2, "ckidxres");
 		QETH_CARD_TEXT(card, 2, " idxterm");
-		QETH_CARD_TEXT_(card, 2, "  rc%d", -EIO);
-		if (buffer[4] == 0xf6) {
+		QETH_CARD_TEXT_(card, 2, "rc%x", buffer[4]);
+		if (buffer[4] == QETH_IDX_TERM_BAD_TRANSPORT ||
+		    buffer[4] == QETH_IDX_TERM_BAD_TRANSPORT_VM) {
 			dev_err(&card->gdev->dev,
-			"The qeth device is not configured "
-			"for the OSI layer required by z/VM\n");
-			return -EPERM;
+				"The device does not support the configured transport mode\n");
+			return -EPROTONOSUPPORT;
 		}
 		return -EIO;
 	}
@@ -742,10 +742,10 @@ static void qeth_issue_next_read_cb(struct qeth_card *card,
 	case 0:
 		break;
 	case -EIO:
-		qeth_clear_ipacmd_list(card);
 		qeth_schedule_recovery(card);
 		/* fall through */
 	default:
+		qeth_clear_ipacmd_list(card);
 		goto out;
 	}
 
diff --git a/drivers/s390/net/qeth_core_mpc.h b/drivers/s390/net/qeth_core_mpc.h
index 88f4dc140751..6f5290fabd2c 100644
--- a/drivers/s390/net/qeth_core_mpc.h
+++ b/drivers/s390/net/qeth_core_mpc.h
@@ -899,6 +899,11 @@ extern unsigned char IDX_ACTIVATE_WRITE[];
 #define QETH_IDX_ACT_ERR_AUTH		0x1E
 #define QETH_IDX_ACT_ERR_AUTH_USER	0x20
 
+#define QETH_IDX_TERMINATE		0xc0
+#define QETH_IDX_TERMINATE_MASK		0xc0
+#define QETH_IDX_TERM_BAD_TRANSPORT	0x41
+#define QETH_IDX_TERM_BAD_TRANSPORT_VM	0xf6
+
 #define PDU_ENCAPSULATION(buffer) \
 	(buffer + *(buffer + (*(buffer + 0x0b)) + \
 	 *(buffer + *(buffer + 0x0b) + 0x11) + 0x07))
-- 
2.17.1

  reply	other threads:[~2019-12-18 15:32 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-18 15:32 [PATCH net 0/3] s390/qeth: fixes 2019-12-18 Julian Wiedmann
2019-12-18 15:32 ` Julian Wiedmann
2019-12-18 15:32 ` Julian Wiedmann [this message]
2019-12-18 15:32   ` [PATCH net 1/3] s390/qeth: handle error due to unsupported transport mode Julian Wiedmann
2019-12-18 15:32 ` [PATCH net 2/3] s390/qeth: fix promiscuous mode after reset Julian Wiedmann
2019-12-18 15:32   ` Julian Wiedmann
2019-12-18 15:32 ` [PATCH net 3/3] s390/qeth: don't return -ENOTSUPP to userspace Julian Wiedmann
2019-12-18 15:32   ` Julian Wiedmann
2019-12-21  5:00 ` [PATCH net 0/3] s390/qeth: fixes 2019-12-18 David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191218153228.29908-2-jwi@linux.ibm.com \
    --to=jwi@linux.ibm.com \
    --cc=davem@davemloft.net \
    --cc=heiko.carstens@de.ibm.com \
    --cc=linux-s390@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=raspl@linux.ibm.com \
    --cc=ubraun@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.