From: Vasily Khoruzhick <anarsoul@gmail.com> To: "Yangtao Li" <tiny.windzz@gmail.com>, "Zhang Rui" <rui.zhang@intel.com>, "Daniel Lezcano" <daniel.lezcano@linaro.org>, "Amit Kucheria" <amit.kucheria@verdurent.com>, "Rob Herring" <robh+dt@kernel.org>, "Mark Rutland" <mark.rutland@arm.com>, "Maxime Ripard" <mripard@kernel.org>, "Chen-Yu Tsai" <wens@csie.org>, "Mauro Carvalho Chehab" <mchehab+samsung@kernel.org>, "David S. Miller" <davem@davemloft.net>, "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>, linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, "Ondřej Jirman" <megous@megous.com>, linux-kernel@vger.kernel.org Cc: Vasily Khoruzhick <anarsoul@gmail.com> Subject: [PATCH v8 4/7] ARM: dts: sun8i-h3: Add thermal sensor and thermal zones Date: Thu, 19 Dec 2019 09:28:20 -0800 [thread overview] Message-ID: <20191219172823.1652600-5-anarsoul@gmail.com> (raw) In-Reply-To: <20191219172823.1652600-1-anarsoul@gmail.com> From: Ondrej Jirman <megous@megous.com> There is just one sensor for the CPU. Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> --- arch/arm/boot/dts/sun8i-h3.dtsi | 20 ++++++++++++++++++++ arch/arm/boot/dts/sunxi-h3-h5.dtsi | 6 ++++++ 2 files changed, 26 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index fe773c72a69b..be8f601ab8cf 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -199,6 +199,26 @@ mali: gpu@1c40000 { assigned-clocks = <&ccu CLK_GPU>; assigned-clock-rates = <384000000>; }; + + ths: thermal-sensor@1c25000 { + compatible = "allwinner,sun8i-h3-ths"; + reg = <0x01c25000 0x400>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + resets = <&ccu RST_BUS_THS>; + clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>; + clock-names = "bus", "mod"; + nvmem-cells = <&ths_calibration>; + nvmem-cell-names = "calibration"; + #thermal-sensor-cells = <0>; + }; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 0>; + }; }; }; diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 0afea59486c2..6e68ed831015 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -231,6 +231,12 @@ mmc2: mmc@1c11000 { sid: eeprom@1c14000 { /* compatible is in per SoC .dtsi file */ reg = <0x1c14000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + + ths_calibration: thermal-sensor-calibration@34 { + reg = <0x34 4>; + }; }; usb_otg: usb@1c19000 { -- 2.24.1
WARNING: multiple messages have this Message-ID (diff)
From: Vasily Khoruzhick <anarsoul@gmail.com> To: "Yangtao Li" <tiny.windzz@gmail.com>, "Zhang Rui" <rui.zhang@intel.com>, "Daniel Lezcano" <daniel.lezcano@linaro.org>, "Amit Kucheria" <amit.kucheria@verdurent.com>, "Rob Herring" <robh+dt@kernel.org>, "Mark Rutland" <mark.rutland@arm.com>, "Maxime Ripard" <mripard@kernel.org>, "Chen-Yu Tsai" <wens@csie.org>, "Mauro Carvalho Chehab" <mchehab+samsung@kernel.org>, "David S. Miller" <davem@davemloft.net>, "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>, linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, "Ondřej Jirman" <megous@megous.com>, linux-kernel@vger.kernel.org Subject: [PATCH v8 4/7] ARM: dts: sun8i-h3: Add thermal sensor and thermal zones Date: Thu, 19 Dec 2019 09:28:20 -0800 [thread overview] Message-ID: <20191219172823.1652600-5-anarsoul@gmail.com> (raw) In-Reply-To: <20191219172823.1652600-1-anarsoul@gmail.com> From: Ondrej Jirman <megous@megous.com> There is just one sensor for the CPU. Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> --- arch/arm/boot/dts/sun8i-h3.dtsi | 20 ++++++++++++++++++++ arch/arm/boot/dts/sunxi-h3-h5.dtsi | 6 ++++++ 2 files changed, 26 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index fe773c72a69b..be8f601ab8cf 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -199,6 +199,26 @@ mali: gpu@1c40000 { assigned-clocks = <&ccu CLK_GPU>; assigned-clock-rates = <384000000>; }; + + ths: thermal-sensor@1c25000 { + compatible = "allwinner,sun8i-h3-ths"; + reg = <0x01c25000 0x400>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + resets = <&ccu RST_BUS_THS>; + clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>; + clock-names = "bus", "mod"; + nvmem-cells = <&ths_calibration>; + nvmem-cell-names = "calibration"; + #thermal-sensor-cells = <0>; + }; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 0>; + }; }; }; diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index 0afea59486c2..6e68ed831015 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -231,6 +231,12 @@ mmc2: mmc@1c11000 { sid: eeprom@1c14000 { /* compatible is in per SoC .dtsi file */ reg = <0x1c14000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + + ths_calibration: thermal-sensor-calibration@34 { + reg = <0x34 4>; + }; }; usb_otg: usb@1c19000 { -- 2.24.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-12-19 17:28 UTC|newest] Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-12-19 17:28 [PATCH v8 0/7] add thermal sensor driver for A64, A83T, H3, H5, H6, R40 Vasily Khoruzhick 2019-12-19 17:28 ` Vasily Khoruzhick 2019-12-19 17:28 ` [PATCH v8 1/7] thermal: sun8i: add thermal driver for H6/H5/H3/A64/A83T/R40 Vasily Khoruzhick 2019-12-19 17:28 ` Vasily Khoruzhick 2019-12-24 13:23 ` Daniel Lezcano 2019-12-24 13:23 ` Daniel Lezcano 2019-12-19 17:28 ` [PATCH v8 2/7] dt-bindings: thermal: add YAML schema for sun8i-thermal driver bindings Vasily Khoruzhick 2019-12-19 17:28 ` Vasily Khoruzhick 2019-12-19 17:32 ` Maxime Ripard 2019-12-19 17:32 ` Maxime Ripard 2019-12-19 17:28 ` [PATCH v8 3/7] ARM: dts: sun8i-a83t: Add thermal sensor and thermal zones Vasily Khoruzhick 2019-12-19 17:28 ` Vasily Khoruzhick 2019-12-19 17:28 ` Vasily Khoruzhick [this message] 2019-12-19 17:28 ` [PATCH v8 4/7] ARM: dts: sun8i-h3: " Vasily Khoruzhick 2019-12-19 17:28 ` [PATCH v8 5/7] arm64: dts: allwinner: h5: " Vasily Khoruzhick 2019-12-19 17:28 ` Vasily Khoruzhick 2019-12-19 17:28 ` [PATCH v8 6/7] arm64: dts: allwinner: h6: " Vasily Khoruzhick 2019-12-19 17:28 ` Vasily Khoruzhick 2019-12-19 17:28 ` [PATCH v8 7/7] arm64: dts: allwinner: a64: Add thermal sensors " Vasily Khoruzhick 2019-12-19 17:28 ` Vasily Khoruzhick 2019-12-19 17:33 ` [PATCH v8 0/7] add thermal sensor driver for A64, A83T, H3, H5, H6, R40 Maxime Ripard 2019-12-19 17:33 ` Maxime Ripard 2019-12-24 18:30 ` Daniel Lezcano 2019-12-24 18:30 ` Daniel Lezcano 2019-12-26 9:27 ` Maxime Ripard 2019-12-26 9:27 ` Maxime Ripard 2019-12-26 10:37 ` Ondřej Jirman 2019-12-26 10:37 ` Ondřej Jirman 2019-12-27 15:37 ` Maxime Ripard 2019-12-27 15:37 ` Maxime Ripard 2019-12-26 10:44 ` Corentin Labbe 2019-12-26 10:44 ` Corentin Labbe 2019-12-26 12:47 ` Frank Lee 2019-12-26 12:47 ` Frank Lee 2019-12-26 20:26 ` Corentin Labbe 2019-12-26 20:26 ` Corentin Labbe 2019-12-29 21:18 ` Corentin Labbe 2019-12-29 21:18 ` Corentin Labbe 2019-12-24 13:11 ` Corentin Labbe 2019-12-24 13:11 ` Corentin Labbe 2019-12-24 14:36 ` Frank Lee 2019-12-24 14:36 ` Frank Lee 2020-02-06 14:13 ` Amit Kucheria 2020-02-06 14:13 ` Amit Kucheria 2020-02-06 15:57 ` Ondřej Jirman 2020-02-06 15:57 ` Ondřej Jirman 2020-02-06 19:26 ` Amit Kucheria 2020-02-06 19:26 ` Amit Kucheria 2020-02-06 16:46 ` Daniel Lezcano 2020-02-06 16:46 ` Daniel Lezcano 2020-02-06 19:23 ` Amit Kucheria 2020-02-06 19:23 ` Amit Kucheria 2020-02-07 9:31 ` Daniel Lezcano 2020-02-07 9:31 ` Daniel Lezcano 2020-02-07 0:49 ` Vasily Khoruzhick 2020-02-07 0:49 ` Vasily Khoruzhick
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20191219172823.1652600-5-anarsoul@gmail.com \ --to=anarsoul@gmail.com \ --cc=amit.kucheria@verdurent.com \ --cc=daniel.lezcano@linaro.org \ --cc=davem@davemloft.net \ --cc=devicetree@vger.kernel.org \ --cc=gregkh@linuxfoundation.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=mchehab+samsung@kernel.org \ --cc=megous@megous.com \ --cc=mripard@kernel.org \ --cc=robh+dt@kernel.org \ --cc=rui.zhang@intel.com \ --cc=tiny.windzz@gmail.com \ --cc=wens@csie.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.