* Pull request: u-boot-net.git master
[not found] <201912201605.xBKG5gDE005236@osboxes.amer.corp.natinst.com>
@ 2019-12-22 23:05 ` Tom Rini
0 siblings, 0 replies; 6+ messages in thread
From: Tom Rini @ 2019-12-22 23:05 UTC (permalink / raw)
To: u-boot
On Fri, Dec 20, 2019 at 10:02:52AM -0600, Joe Hershberger wrote:
> Hi Tom,
>
> Two fixes for the net PR and a single env patch. Happy holidays!
>
> The following changes since commit 643366bcd5e32878a951e39b8b553b794695b026:
>
> Merge tag 'u-boot-stm32-20191218' of https://gitlab.denx.de/u-boot/custodians/u-boot-stm (2019-12-18 08:25:49 -0500)
>
> are available in the git repository at:
>
> https://gitlab.denx.de/u-boot/custodians/u-boot-net.git master
>
> for you to fetch changes up to c62e6142b95045621fc229d34f40bd8d0e41160a:
>
> fw_setenv: avoid writing environment when nothing has changed (2019-12-20 10:02:24 -0600)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20191222/e07e6a7b/attachment.sig>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Pull request: u-boot-net.git master
[not found] <202003100413.02A4DCSZ009513@osboxes.amer.corp.natinst.com>
@ 2020-03-10 17:11 ` Tom Rini
0 siblings, 0 replies; 6+ messages in thread
From: Tom Rini @ 2020-03-10 17:11 UTC (permalink / raw)
To: u-boot
On Mon, Mar 09, 2020 at 11:10:28PM -0500, Joe Hershberger wrote:
> Hi Tom,
>
> Net changes that didn't cause regressions.
>
> https://travis-ci.org/jhershbe/u-boot/builds/660395685
>
> There are some other patches that are causing problems, so I'll just send these
> now and work with the contributors on fixing the others.
>
> The following changes since commit d16e18ca6c4d81ac142acd529b1acb55b0c96dfc:
>
> Merge branch 'master' of git://git.denx.de/u-boot-sh (2020-03-04 19:21:00 -0500)
>
> are available in the git repository at:
>
> https://gitlab.denx.de/u-boot/custodians/u-boot-net.git master
>
> for you to fetch changes up to 1c1f4f0a4b6a0796160e50b67f84b73f435a334b:
>
> net: phy: marvell: Unify 88E151x series phy_driver (2020-03-09 18:11:25 -0500)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200310/ac727dc0/attachment.sig>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Pull request: u-boot-net.git master
[not found] <201912091554.xB9Fs2eB030691@osboxes.amer.corp.natinst.com>
2019-12-09 22:49 ` Tom Rini
@ 2019-12-10 4:01 ` Tom Rini
1 sibling, 0 replies; 6+ messages in thread
From: Tom Rini @ 2019-12-10 4:01 UTC (permalink / raw)
To: u-boot
On Mon, Dec 09, 2019 at 09:51:32AM -0600, Joe Hershberger wrote:
> Hi Tom,
>
> Between dropping the superceeded atheros series and applying your nfs trim patch, things appear to be all good.
>
> Passed testing at https://travis-ci.org/jhershbe/u-boot/builds/622465407
>
> The following changes since commit b38c3a641fc01fcd4eda5fa107ae3c247baa0196:
>
> Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86 (2019-12-08 10:51:00 -0500)
>
> are available in the git repository at:
>
> https://gitlab.denx.de/u-boot/custodians/u-boot-net.git master
>
> for you to fetch changes up to 2c4e067d493d031d1267eea1c635d1eab93ce8f7:
>
> cmd: pxe: Increase maximum path length (2019-12-09 09:49:48 -0600)
>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20191209/10686b88/attachment.sig>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Pull request: u-boot-net.git master
2019-12-09 23:15 ` Joe Hershberger
@ 2019-12-10 0:07 ` Tom Rini
0 siblings, 0 replies; 6+ messages in thread
From: Tom Rini @ 2019-12-10 0:07 UTC (permalink / raw)
To: u-boot
On Mon, Dec 09, 2019 at 11:15:39PM +0000, Joe Hershberger wrote:
> Hi Tom,
>
> On Mon, Dec 9, 2019 at 4:49 PM Tom Rini <trini@konsulko.com> wrote:
> >
> > On Mon, Dec 09, 2019 at 09:51:32AM -0600, Joe Hershberger wrote:
> >
> > > Hi Tom,
> > >
> > > Between dropping the superceeded atheros series and applying your nfs trim patch, things appear to be all good.
> > >
> > > Passed testing at https://travis-ci.org/jhershbe/u-boot/builds/622465407
> > >
> > > The following changes since commit b38c3a641fc01fcd4eda5fa107ae3c247baa0196:
> > >
> > > Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86 (2019-12-08 10:51:00 -0500)
> > >
> > > are available in the git repository at:
> > >
> > > https://gitlab.denx.de/u-boot/custodians/u-boot-net.git master
> > >
> > > for you to fetch changes up to 2c4e067d493d031d1267eea1c635d1eab93ce8f7:
> > >
> > > cmd: pxe: Increase maximum path length (2019-12-09 09:49:48 -0600)
> > >
> > > ----------------------------------------------------------------
> > > Alex Marginean (18):
> > > include: phy: define XFI and USXGMII interface types
> > > include: phy: add data field for private driver data
> > > drivers: net: aquantia: use XFI, USXGMII interface types
> > > drivers: net: aquantia: add PHY generation information
> > > drivers: net: aquantia: set up SI protocol based on interface type
> > > drivers: net: aquantia: set MDI reversal based on DT property
> > > drivers: net: aquantia: set SMBus addr based on DT property
> > > drivers: net: aquantia: check system interface too when checking for link up
> > > doc: bindings: add bindings document for PHY nodes
> > > doc: bindings: Aquantia PHY node binding
> > > drivers: net: fsl_enetc: use XFI, USXGMII interface type macros
> > > net: mdio-uclass: rename arguments of dm_mdio_phy_connect for clarity
> > > net: mdio-uclass: add dm_eth_phy_connect helper function
> > > drivers: net: fsl_enetc: use the new MDIO DM helper functions
> > > drivers: net: fsl_enetc: Add 2.5Gbps to supported link speeds
> > > drivers: net: fsl_enetc: move PCS and PHY config to probe
> > > drivers: net: fsl_enetc_mdio: return with time-out if HW is stuck
> > > drivers: net: fsl_enetc: register internal MDIO bus
> > >
> > > Anatolij Gustschin (5):
> > > net: phy: mv88e61xx: rework to enable detection of 88E6071 devices
> > > net: phy: mv88e61xx: add CPU port parameter init for 88E6071
> > > net: phy: mv88E61xx: fix ENERGY_DET init for mv88E6071
> > > net: phy: mv88e61xx: register phy_driver struct for 88E6071
> > > net: phy: fix switch vendor name
> > >
> > > Andre Przywara (1):
> > > net: tftp: Fix too small block size
> > >
> > > Ben Wolsieffer (1):
> > > cmd: pxe: Increase maximum path length
> > >
> > > Bin Meng (1):
> > > net: tftp: Fix tftp store address check in store_block()
> > >
> > > Cédric Le Goater (1):
> > > net: ftgmac100: align RX/TX descriptors on ARCH_DMA_MINALIGN
> > >
> > > Florin Chiculita (1):
> > > net: phy: aquantia: wait for phy init sequence to finish
> > >
> > > Grygorii Strashko (8):
> > > net: phy: ti: rename ti.c to dp83867.c
> > > net: phy: dp83867: move static initialization to .probe()
> > > dt-bindings: phy: dp83867: Add documentation for disabling clock output
> > > net: phy: dp83867: Add ability to disable output clock
> > > net: phy: dp83867: rework delay rgmii delay handling
> > > net: phy: dp83867: io impedance is not dependent on RGMII delay
> > > net: phy: dp83867: refactor rgmii configuration
> > > arm: dts: k3-am654-base-board-u-boot: change cpsw2g interface mode to rgmii-rxid
> > >
> > > Grzegorz Jaszczyk (1):
> > > net: mvpp2: mark phy as invalid in case of missing appropriate driver
> > >
> > > Heinrich Schuchardt (1):
> > > net: avoid address-of-packed-member error
> > >
> > > Joe Hershberger (3):
> > > net: Always build the string_to_enetaddr() helper
> > > net: Improve documentation for string_to_ip()
> > > lib: Always build support for formatting MAC and IP address
> > >
> > > Josef Holzmayr (2):
> > > net: macb: explicitly pass phy_adr to mdio read and write
> > > net: macb: let miiphy_read/_write pass arbitrary addresses
> > >
> > > Michael Walle (1):
> > > net: eth-uclass: ignore unavailable devices
> > >
> > > Nevo Hed (3):
> > > arm: dts: armada-cp110-*dtsi: add xmdio nodes
> > > net: mvpp2: use new MVMDIO driver
> > > net: mvpp2: MVPP2 now needs MVMDIO
> > >
> > > Nicolas Ferre (1):
> > > net: phy: micrel: make sure the factory test bit is cleared
> > >
> > > Priyanka Jain (1):
> > > net/phy: Fix phy_connect() for phy addr 0
> > >
> > > Ramon Fried (1):
> > > cmd: mdio/mii: add Kconfig help and allow break dependency
> > >
> > > Stefan Chulski (1):
> > > net: mvpp2x: fix traffic stuck after PHY start error
> > >
> > > Stefan Roese (1):
> > > net: phy: Increase link up delay in genphy_update_link()
> > >
> > > Thierry Reding (1):
> > > net: rtl8169: Support RTL-8168c/8111c
> > >
> > > Tom Rini (1):
> > > net: nfs: Only link in NFS code outside of SPL builds
> > >
> > > Vignesh Raghavendra (6):
> > > dma: Introduce dma_get_cfg() interface
> > > dma: ti: k3-udma: Implement dma_get_cfg() interface
> > > net: ti: am65-cpsw-nuss: Rework RX flow ID handling
> > > net: ti: am65-cpsw-nuss: Add new compatible for J721e
> > > arm: dts: k3-j721e-common-proc-board: Add DMA and CPSW related DT nodes
> > > configs: j721e_evm_a72_defconfig: Enable DMA and Ethernet
> > >
> > > arch/arm/dts/armada-cp110-master.dtsi | 9 +
> > > arch/arm/dts/armada-cp110-slave.dtsi | 9 +
> > > arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 3 +-
> > > .../arm/dts/k3-j721e-common-proc-board-u-boot.dtsi | 238 ++++++++++++++++++++
> > > arch/arm/mach-tegra/cboot.c | 2 +-
> > > board/renesas/sh7752evb/sh7752evb.c | 2 +-
> > > board/renesas/sh7753evb/sh7753evb.c | 2 +-
> > > board/renesas/sh7757lcr/sh7757lcr.c | 4 +-
> > > cmd/Kconfig | 18 +-
> > > cmd/Makefile | 4 +-
> > > cmd/ethsw.c | 2 +-
> > > cmd/nvedit.c | 2 +-
> > > cmd/pxe_utils.c | 2 +-
> > > configs/j721e_evm_a72_defconfig | 8 +
> > > doc/README.enetaddr | 4 +-
> > > doc/device-tree-bindings/net/aquantia-phy.txt | 25 +++
> > > doc/device-tree-bindings/net/phy.txt | 24 ++
> > > doc/device-tree-bindings/net/ti,dp83867.txt | 6 +-
> > > drivers/dma/dma-uclass.c | 12 +
> > > drivers/dma/ti/k3-udma.c | 29 +++
> > > drivers/net/Kconfig | 2 +
> > > drivers/net/fsl_enetc.c | 86 +++-----
> > > drivers/net/fsl_enetc.h | 1 +
> > > drivers/net/fsl_enetc_mdio.c | 7 +-
> > > drivers/net/ftgmac100.c | 16 +-
> > > drivers/net/macb.c | 39 ++--
> > > drivers/net/mvpp2.c | 241 +++++---------------
> > > drivers/net/phy/Kconfig | 2 +-
> > > drivers/net/phy/Makefile | 2 +-
> > > drivers/net/phy/aquantia.c | 241 ++++++++++++++++++--
> > > drivers/net/phy/{ti.c => dp83867.c} | 243 ++++++++++++++-------
> > > drivers/net/phy/micrel_ksz8xxx.c | 21 +-
> > > drivers/net/phy/mv88e61xx.c | 226 +++++++++++++++----
> > > drivers/net/phy/phy.c | 6 +-
> > > drivers/net/rtl8169.c | 1 +
> > > drivers/net/ti/am65-cpsw-nuss.c | 16 +-
> > > include/dma-uclass.h | 11 +
> > > include/dma.h | 12 +
> > > include/dt-bindings/net/ti-dp83867.h | 3 +-
> > > include/linux/soc/ti/ti-udma.h | 19 ++
> > > include/miiphy.h | 18 +-
> > > include/net.h | 34 +--
> > > include/phy.h | 3 +
> > > include/phy_interface.h | 4 +
> > > lib/net_utils.c | 15 ++
> > > lib/vsprintf.c | 4 -
> > > net/Kconfig | 2 +-
> > > net/eth-uclass.c | 19 +-
> > > net/eth_legacy.c | 2 +-
> > > net/mdio-uclass.c | 100 ++++++++-
> > > net/net.c | 36 +--
> > > net/tftp.c | 7 +-
> > > 52 files changed, 1316 insertions(+), 528 deletions(-)
> > > create mode 100644 doc/device-tree-bindings/net/aquantia-phy.txt
> > > create mode 100644 doc/device-tree-bindings/net/phy.txt
> > > rename drivers/net/phy/{ti.c => dp83867.c} (63%)
> >
> > I've reviewed this and tested it locally and things are OK. First, are
> > you sure that a month out from release we should still take this large
> > of a set of changes to master?
>
> I tried to leave out the questionable changes, though I agree I wish
> it were in earlier... Between merge conflicts, build failures /
> triage, and work schedule, the PR slipped a lot more than you or I
> would like.
>
> If it's ok with you, maybe we can just be willing to revert anything
> that causes issues, and defer that to the next release if it happens.
OK, we'll go with reverting things if issues show up.
> > Second, is there anything we can do about the growth of 'struct phy' ?
> > We have some boards with a few possible PHY drivers and in turn a number
> > of PHY drivers and it's a non-trivial growth to support this field.
>
> Are you referring to all of the "registered" phy drivers based on the
> enabled phys? That adds to the "phy_drivers" structure when
> phy_register() is called? If not, what was it that you're referring
> to? The literal "struct phy" seems to be for generic USB phys and what
> not - I assume that's not what you're talking about.
Yes, sorry, I misspoke and it's phy_drivers.
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20191209/163f66ec/attachment.sig>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Pull request: u-boot-net.git master
2019-12-09 22:49 ` Tom Rini
@ 2019-12-09 23:15 ` Joe Hershberger
2019-12-10 0:07 ` Tom Rini
0 siblings, 1 reply; 6+ messages in thread
From: Joe Hershberger @ 2019-12-09 23:15 UTC (permalink / raw)
To: u-boot
Hi Tom,
On Mon, Dec 9, 2019 at 4:49 PM Tom Rini <trini@konsulko.com> wrote:
>
> On Mon, Dec 09, 2019 at 09:51:32AM -0600, Joe Hershberger wrote:
>
> > Hi Tom,
> >
> > Between dropping the superceeded atheros series and applying your nfs trim patch, things appear to be all good.
> >
> > Passed testing at https://travis-ci.org/jhershbe/u-boot/builds/622465407
> >
> > The following changes since commit b38c3a641fc01fcd4eda5fa107ae3c247baa0196:
> >
> > Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86 (2019-12-08 10:51:00 -0500)
> >
> > are available in the git repository at:
> >
> > https://gitlab.denx.de/u-boot/custodians/u-boot-net.git master
> >
> > for you to fetch changes up to 2c4e067d493d031d1267eea1c635d1eab93ce8f7:
> >
> > cmd: pxe: Increase maximum path length (2019-12-09 09:49:48 -0600)
> >
> > ----------------------------------------------------------------
> > Alex Marginean (18):
> > include: phy: define XFI and USXGMII interface types
> > include: phy: add data field for private driver data
> > drivers: net: aquantia: use XFI, USXGMII interface types
> > drivers: net: aquantia: add PHY generation information
> > drivers: net: aquantia: set up SI protocol based on interface type
> > drivers: net: aquantia: set MDI reversal based on DT property
> > drivers: net: aquantia: set SMBus addr based on DT property
> > drivers: net: aquantia: check system interface too when checking for link up
> > doc: bindings: add bindings document for PHY nodes
> > doc: bindings: Aquantia PHY node binding
> > drivers: net: fsl_enetc: use XFI, USXGMII interface type macros
> > net: mdio-uclass: rename arguments of dm_mdio_phy_connect for clarity
> > net: mdio-uclass: add dm_eth_phy_connect helper function
> > drivers: net: fsl_enetc: use the new MDIO DM helper functions
> > drivers: net: fsl_enetc: Add 2.5Gbps to supported link speeds
> > drivers: net: fsl_enetc: move PCS and PHY config to probe
> > drivers: net: fsl_enetc_mdio: return with time-out if HW is stuck
> > drivers: net: fsl_enetc: register internal MDIO bus
> >
> > Anatolij Gustschin (5):
> > net: phy: mv88e61xx: rework to enable detection of 88E6071 devices
> > net: phy: mv88e61xx: add CPU port parameter init for 88E6071
> > net: phy: mv88E61xx: fix ENERGY_DET init for mv88E6071
> > net: phy: mv88e61xx: register phy_driver struct for 88E6071
> > net: phy: fix switch vendor name
> >
> > Andre Przywara (1):
> > net: tftp: Fix too small block size
> >
> > Ben Wolsieffer (1):
> > cmd: pxe: Increase maximum path length
> >
> > Bin Meng (1):
> > net: tftp: Fix tftp store address check in store_block()
> >
> > Cédric Le Goater (1):
> > net: ftgmac100: align RX/TX descriptors on ARCH_DMA_MINALIGN
> >
> > Florin Chiculita (1):
> > net: phy: aquantia: wait for phy init sequence to finish
> >
> > Grygorii Strashko (8):
> > net: phy: ti: rename ti.c to dp83867.c
> > net: phy: dp83867: move static initialization to .probe()
> > dt-bindings: phy: dp83867: Add documentation for disabling clock output
> > net: phy: dp83867: Add ability to disable output clock
> > net: phy: dp83867: rework delay rgmii delay handling
> > net: phy: dp83867: io impedance is not dependent on RGMII delay
> > net: phy: dp83867: refactor rgmii configuration
> > arm: dts: k3-am654-base-board-u-boot: change cpsw2g interface mode to rgmii-rxid
> >
> > Grzegorz Jaszczyk (1):
> > net: mvpp2: mark phy as invalid in case of missing appropriate driver
> >
> > Heinrich Schuchardt (1):
> > net: avoid address-of-packed-member error
> >
> > Joe Hershberger (3):
> > net: Always build the string_to_enetaddr() helper
> > net: Improve documentation for string_to_ip()
> > lib: Always build support for formatting MAC and IP address
> >
> > Josef Holzmayr (2):
> > net: macb: explicitly pass phy_adr to mdio read and write
> > net: macb: let miiphy_read/_write pass arbitrary addresses
> >
> > Michael Walle (1):
> > net: eth-uclass: ignore unavailable devices
> >
> > Nevo Hed (3):
> > arm: dts: armada-cp110-*dtsi: add xmdio nodes
> > net: mvpp2: use new MVMDIO driver
> > net: mvpp2: MVPP2 now needs MVMDIO
> >
> > Nicolas Ferre (1):
> > net: phy: micrel: make sure the factory test bit is cleared
> >
> > Priyanka Jain (1):
> > net/phy: Fix phy_connect() for phy addr 0
> >
> > Ramon Fried (1):
> > cmd: mdio/mii: add Kconfig help and allow break dependency
> >
> > Stefan Chulski (1):
> > net: mvpp2x: fix traffic stuck after PHY start error
> >
> > Stefan Roese (1):
> > net: phy: Increase link up delay in genphy_update_link()
> >
> > Thierry Reding (1):
> > net: rtl8169: Support RTL-8168c/8111c
> >
> > Tom Rini (1):
> > net: nfs: Only link in NFS code outside of SPL builds
> >
> > Vignesh Raghavendra (6):
> > dma: Introduce dma_get_cfg() interface
> > dma: ti: k3-udma: Implement dma_get_cfg() interface
> > net: ti: am65-cpsw-nuss: Rework RX flow ID handling
> > net: ti: am65-cpsw-nuss: Add new compatible for J721e
> > arm: dts: k3-j721e-common-proc-board: Add DMA and CPSW related DT nodes
> > configs: j721e_evm_a72_defconfig: Enable DMA and Ethernet
> >
> > arch/arm/dts/armada-cp110-master.dtsi | 9 +
> > arch/arm/dts/armada-cp110-slave.dtsi | 9 +
> > arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 3 +-
> > .../arm/dts/k3-j721e-common-proc-board-u-boot.dtsi | 238 ++++++++++++++++++++
> > arch/arm/mach-tegra/cboot.c | 2 +-
> > board/renesas/sh7752evb/sh7752evb.c | 2 +-
> > board/renesas/sh7753evb/sh7753evb.c | 2 +-
> > board/renesas/sh7757lcr/sh7757lcr.c | 4 +-
> > cmd/Kconfig | 18 +-
> > cmd/Makefile | 4 +-
> > cmd/ethsw.c | 2 +-
> > cmd/nvedit.c | 2 +-
> > cmd/pxe_utils.c | 2 +-
> > configs/j721e_evm_a72_defconfig | 8 +
> > doc/README.enetaddr | 4 +-
> > doc/device-tree-bindings/net/aquantia-phy.txt | 25 +++
> > doc/device-tree-bindings/net/phy.txt | 24 ++
> > doc/device-tree-bindings/net/ti,dp83867.txt | 6 +-
> > drivers/dma/dma-uclass.c | 12 +
> > drivers/dma/ti/k3-udma.c | 29 +++
> > drivers/net/Kconfig | 2 +
> > drivers/net/fsl_enetc.c | 86 +++-----
> > drivers/net/fsl_enetc.h | 1 +
> > drivers/net/fsl_enetc_mdio.c | 7 +-
> > drivers/net/ftgmac100.c | 16 +-
> > drivers/net/macb.c | 39 ++--
> > drivers/net/mvpp2.c | 241 +++++---------------
> > drivers/net/phy/Kconfig | 2 +-
> > drivers/net/phy/Makefile | 2 +-
> > drivers/net/phy/aquantia.c | 241 ++++++++++++++++++--
> > drivers/net/phy/{ti.c => dp83867.c} | 243 ++++++++++++++-------
> > drivers/net/phy/micrel_ksz8xxx.c | 21 +-
> > drivers/net/phy/mv88e61xx.c | 226 +++++++++++++++----
> > drivers/net/phy/phy.c | 6 +-
> > drivers/net/rtl8169.c | 1 +
> > drivers/net/ti/am65-cpsw-nuss.c | 16 +-
> > include/dma-uclass.h | 11 +
> > include/dma.h | 12 +
> > include/dt-bindings/net/ti-dp83867.h | 3 +-
> > include/linux/soc/ti/ti-udma.h | 19 ++
> > include/miiphy.h | 18 +-
> > include/net.h | 34 +--
> > include/phy.h | 3 +
> > include/phy_interface.h | 4 +
> > lib/net_utils.c | 15 ++
> > lib/vsprintf.c | 4 -
> > net/Kconfig | 2 +-
> > net/eth-uclass.c | 19 +-
> > net/eth_legacy.c | 2 +-
> > net/mdio-uclass.c | 100 ++++++++-
> > net/net.c | 36 +--
> > net/tftp.c | 7 +-
> > 52 files changed, 1316 insertions(+), 528 deletions(-)
> > create mode 100644 doc/device-tree-bindings/net/aquantia-phy.txt
> > create mode 100644 doc/device-tree-bindings/net/phy.txt
> > rename drivers/net/phy/{ti.c => dp83867.c} (63%)
>
> I've reviewed this and tested it locally and things are OK. First, are
> you sure that a month out from release we should still take this large
> of a set of changes to master?
I tried to leave out the questionable changes, though I agree I wish
it were in earlier... Between merge conflicts, build failures /
triage, and work schedule, the PR slipped a lot more than you or I
would like.
If it's ok with you, maybe we can just be willing to revert anything
that causes issues, and defer that to the next release if it happens.
> Second, is there anything we can do about the growth of 'struct phy' ?
> We have some boards with a few possible PHY drivers and in turn a number
> of PHY drivers and it's a non-trivial growth to support this field.
Are you referring to all of the "registered" phy drivers based on the
enabled phys? That adds to the "phy_drivers" structure when
phy_register() is called? If not, what was it that you're referring
to? The literal "struct phy" seems to be for generic USB phys and what
not - I assume that's not what you're talking about.
Thanks,
-Joe
> Thanks!
>
> --
> Tom
^ permalink raw reply [flat|nested] 6+ messages in thread
* Pull request: u-boot-net.git master
[not found] <201912091554.xB9Fs2eB030691@osboxes.amer.corp.natinst.com>
@ 2019-12-09 22:49 ` Tom Rini
2019-12-09 23:15 ` Joe Hershberger
2019-12-10 4:01 ` Tom Rini
1 sibling, 1 reply; 6+ messages in thread
From: Tom Rini @ 2019-12-09 22:49 UTC (permalink / raw)
To: u-boot
On Mon, Dec 09, 2019 at 09:51:32AM -0600, Joe Hershberger wrote:
> Hi Tom,
>
> Between dropping the superceeded atheros series and applying your nfs trim patch, things appear to be all good.
>
> Passed testing at https://travis-ci.org/jhershbe/u-boot/builds/622465407
>
> The following changes since commit b38c3a641fc01fcd4eda5fa107ae3c247baa0196:
>
> Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86 (2019-12-08 10:51:00 -0500)
>
> are available in the git repository at:
>
> https://gitlab.denx.de/u-boot/custodians/u-boot-net.git master
>
> for you to fetch changes up to 2c4e067d493d031d1267eea1c635d1eab93ce8f7:
>
> cmd: pxe: Increase maximum path length (2019-12-09 09:49:48 -0600)
>
> ----------------------------------------------------------------
> Alex Marginean (18):
> include: phy: define XFI and USXGMII interface types
> include: phy: add data field for private driver data
> drivers: net: aquantia: use XFI, USXGMII interface types
> drivers: net: aquantia: add PHY generation information
> drivers: net: aquantia: set up SI protocol based on interface type
> drivers: net: aquantia: set MDI reversal based on DT property
> drivers: net: aquantia: set SMBus addr based on DT property
> drivers: net: aquantia: check system interface too when checking for link up
> doc: bindings: add bindings document for PHY nodes
> doc: bindings: Aquantia PHY node binding
> drivers: net: fsl_enetc: use XFI, USXGMII interface type macros
> net: mdio-uclass: rename arguments of dm_mdio_phy_connect for clarity
> net: mdio-uclass: add dm_eth_phy_connect helper function
> drivers: net: fsl_enetc: use the new MDIO DM helper functions
> drivers: net: fsl_enetc: Add 2.5Gbps to supported link speeds
> drivers: net: fsl_enetc: move PCS and PHY config to probe
> drivers: net: fsl_enetc_mdio: return with time-out if HW is stuck
> drivers: net: fsl_enetc: register internal MDIO bus
>
> Anatolij Gustschin (5):
> net: phy: mv88e61xx: rework to enable detection of 88E6071 devices
> net: phy: mv88e61xx: add CPU port parameter init for 88E6071
> net: phy: mv88E61xx: fix ENERGY_DET init for mv88E6071
> net: phy: mv88e61xx: register phy_driver struct for 88E6071
> net: phy: fix switch vendor name
>
> Andre Przywara (1):
> net: tftp: Fix too small block size
>
> Ben Wolsieffer (1):
> cmd: pxe: Increase maximum path length
>
> Bin Meng (1):
> net: tftp: Fix tftp store address check in store_block()
>
> Cédric Le Goater (1):
> net: ftgmac100: align RX/TX descriptors on ARCH_DMA_MINALIGN
>
> Florin Chiculita (1):
> net: phy: aquantia: wait for phy init sequence to finish
>
> Grygorii Strashko (8):
> net: phy: ti: rename ti.c to dp83867.c
> net: phy: dp83867: move static initialization to .probe()
> dt-bindings: phy: dp83867: Add documentation for disabling clock output
> net: phy: dp83867: Add ability to disable output clock
> net: phy: dp83867: rework delay rgmii delay handling
> net: phy: dp83867: io impedance is not dependent on RGMII delay
> net: phy: dp83867: refactor rgmii configuration
> arm: dts: k3-am654-base-board-u-boot: change cpsw2g interface mode to rgmii-rxid
>
> Grzegorz Jaszczyk (1):
> net: mvpp2: mark phy as invalid in case of missing appropriate driver
>
> Heinrich Schuchardt (1):
> net: avoid address-of-packed-member error
>
> Joe Hershberger (3):
> net: Always build the string_to_enetaddr() helper
> net: Improve documentation for string_to_ip()
> lib: Always build support for formatting MAC and IP address
>
> Josef Holzmayr (2):
> net: macb: explicitly pass phy_adr to mdio read and write
> net: macb: let miiphy_read/_write pass arbitrary addresses
>
> Michael Walle (1):
> net: eth-uclass: ignore unavailable devices
>
> Nevo Hed (3):
> arm: dts: armada-cp110-*dtsi: add xmdio nodes
> net: mvpp2: use new MVMDIO driver
> net: mvpp2: MVPP2 now needs MVMDIO
>
> Nicolas Ferre (1):
> net: phy: micrel: make sure the factory test bit is cleared
>
> Priyanka Jain (1):
> net/phy: Fix phy_connect() for phy addr 0
>
> Ramon Fried (1):
> cmd: mdio/mii: add Kconfig help and allow break dependency
>
> Stefan Chulski (1):
> net: mvpp2x: fix traffic stuck after PHY start error
>
> Stefan Roese (1):
> net: phy: Increase link up delay in genphy_update_link()
>
> Thierry Reding (1):
> net: rtl8169: Support RTL-8168c/8111c
>
> Tom Rini (1):
> net: nfs: Only link in NFS code outside of SPL builds
>
> Vignesh Raghavendra (6):
> dma: Introduce dma_get_cfg() interface
> dma: ti: k3-udma: Implement dma_get_cfg() interface
> net: ti: am65-cpsw-nuss: Rework RX flow ID handling
> net: ti: am65-cpsw-nuss: Add new compatible for J721e
> arm: dts: k3-j721e-common-proc-board: Add DMA and CPSW related DT nodes
> configs: j721e_evm_a72_defconfig: Enable DMA and Ethernet
>
> arch/arm/dts/armada-cp110-master.dtsi | 9 +
> arch/arm/dts/armada-cp110-slave.dtsi | 9 +
> arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 3 +-
> .../arm/dts/k3-j721e-common-proc-board-u-boot.dtsi | 238 ++++++++++++++++++++
> arch/arm/mach-tegra/cboot.c | 2 +-
> board/renesas/sh7752evb/sh7752evb.c | 2 +-
> board/renesas/sh7753evb/sh7753evb.c | 2 +-
> board/renesas/sh7757lcr/sh7757lcr.c | 4 +-
> cmd/Kconfig | 18 +-
> cmd/Makefile | 4 +-
> cmd/ethsw.c | 2 +-
> cmd/nvedit.c | 2 +-
> cmd/pxe_utils.c | 2 +-
> configs/j721e_evm_a72_defconfig | 8 +
> doc/README.enetaddr | 4 +-
> doc/device-tree-bindings/net/aquantia-phy.txt | 25 +++
> doc/device-tree-bindings/net/phy.txt | 24 ++
> doc/device-tree-bindings/net/ti,dp83867.txt | 6 +-
> drivers/dma/dma-uclass.c | 12 +
> drivers/dma/ti/k3-udma.c | 29 +++
> drivers/net/Kconfig | 2 +
> drivers/net/fsl_enetc.c | 86 +++-----
> drivers/net/fsl_enetc.h | 1 +
> drivers/net/fsl_enetc_mdio.c | 7 +-
> drivers/net/ftgmac100.c | 16 +-
> drivers/net/macb.c | 39 ++--
> drivers/net/mvpp2.c | 241 +++++---------------
> drivers/net/phy/Kconfig | 2 +-
> drivers/net/phy/Makefile | 2 +-
> drivers/net/phy/aquantia.c | 241 ++++++++++++++++++--
> drivers/net/phy/{ti.c => dp83867.c} | 243 ++++++++++++++-------
> drivers/net/phy/micrel_ksz8xxx.c | 21 +-
> drivers/net/phy/mv88e61xx.c | 226 +++++++++++++++----
> drivers/net/phy/phy.c | 6 +-
> drivers/net/rtl8169.c | 1 +
> drivers/net/ti/am65-cpsw-nuss.c | 16 +-
> include/dma-uclass.h | 11 +
> include/dma.h | 12 +
> include/dt-bindings/net/ti-dp83867.h | 3 +-
> include/linux/soc/ti/ti-udma.h | 19 ++
> include/miiphy.h | 18 +-
> include/net.h | 34 +--
> include/phy.h | 3 +
> include/phy_interface.h | 4 +
> lib/net_utils.c | 15 ++
> lib/vsprintf.c | 4 -
> net/Kconfig | 2 +-
> net/eth-uclass.c | 19 +-
> net/eth_legacy.c | 2 +-
> net/mdio-uclass.c | 100 ++++++++-
> net/net.c | 36 +--
> net/tftp.c | 7 +-
> 52 files changed, 1316 insertions(+), 528 deletions(-)
> create mode 100644 doc/device-tree-bindings/net/aquantia-phy.txt
> create mode 100644 doc/device-tree-bindings/net/phy.txt
> rename drivers/net/phy/{ti.c => dp83867.c} (63%)
I've reviewed this and tested it locally and things are OK. First, are
you sure that a month out from release we should still take this large
of a set of changes to master?
Second, is there anything we can do about the growth of 'struct phy' ?
We have some boards with a few possible PHY drivers and in turn a number
of PHY drivers and it's a non-trivial growth to support this field.
Thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20191209/1349e6db/attachment.sig>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-03-10 17:11 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <201912201605.xBKG5gDE005236@osboxes.amer.corp.natinst.com>
2019-12-22 23:05 ` Pull request: u-boot-net.git master Tom Rini
[not found] <202003100413.02A4DCSZ009513@osboxes.amer.corp.natinst.com>
2020-03-10 17:11 ` Tom Rini
[not found] <201912091554.xB9Fs2eB030691@osboxes.amer.corp.natinst.com>
2019-12-09 22:49 ` Tom Rini
2019-12-09 23:15 ` Joe Hershberger
2019-12-10 0:07 ` Tom Rini
2019-12-10 4:01 ` Tom Rini
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.