All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v3] mach-imx: bootaux: elf firmware support
@ 2019-12-30 11:56 Igor Opaniuk
  2020-01-04 11:00 ` sbabic at denx.de
  0 siblings, 1 reply; 2+ messages in thread
From: Igor Opaniuk @ 2019-12-30 11:56 UTC (permalink / raw)
  To: u-boot

From: Igor Opaniuk <igor.opaniuk@toradex.com>

Currently imx-specific bootaux command doesn't support ELF format
firmware for Cortex-M4 core.

This patches introduces a PoC implementation of handling elf firmware
(load_elf_image_phdr() was copy-pasted from elf.c just for PoC).
ELF64 binaries isn't supported yet.

This has the advantage that the user does not need to know to which
address the binary has been linked to. However, in order to handle
and load the elf sections to the right address, we need to translate the
Cortex-M4 core memory addresses to primary/host CPU memory
addresses (Cortex A7/A9 cores).

This allows to boot firmwares from any location with just using
bootaux, e.g.:
> tftp ${loadaddr} hello_world.elf && bootaux ${loadaddr}

Similar translation table can be found in the Linux remoteproc
driver [1].

[1] https://elixir.bootlin.com/linux/latest/source/drivers/remoteproc/imx_rproc.c

Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
---

 arch/arm/include/asm/mach-imx/sys_proto.h |  7 ++
 arch/arm/mach-imx/imx_bootaux.c           | 96 +++++++++++++++++++++--
 arch/arm/mach-imx/mx7/soc.c               | 28 +++++++
 3 files changed, 126 insertions(+), 5 deletions(-)

diff --git a/arch/arm/include/asm/mach-imx/sys_proto.h b/arch/arm/include/asm/mach-imx/sys_proto.h
index c9b509e6a7..fff4800808 100644
--- a/arch/arm/include/asm/mach-imx/sys_proto.h
+++ b/arch/arm/include/asm/mach-imx/sys_proto.h
@@ -106,6 +106,13 @@ void gpr_init(void);
 
 #endif /* CONFIG_MX6 */
 
+/* address translation table */
+struct rproc_att {
+	u32 da; /* device address (From Cortex M4 view) */
+	u32 sa; /* system bus address */
+	u32 size; /* size of reg range */
+};
+
 #ifdef CONFIG_IMX8M
 struct rom_api {
 	u16 ver;
diff --git a/arch/arm/mach-imx/imx_bootaux.c b/arch/arm/mach-imx/imx_bootaux.c
index 7c8195e715..21e96f8c88 100644
--- a/arch/arm/mach-imx/imx_bootaux.c
+++ b/arch/arm/mach-imx/imx_bootaux.c
@@ -7,20 +7,106 @@
 #include <asm/io.h>
 #include <asm/mach-imx/sys_proto.h>
 #include <command.h>
+#include <elf.h>
 #include <imx_sip.h>
 #include <linux/compiler.h>
 #include <cpu_func.h>
 
-int arch_auxiliary_core_up(u32 core_id, ulong boot_private_data)
+#ifndef CONFIG_IMX8M
+const __weak struct rproc_att hostmap[] = { };
+
+static const struct rproc_att *get_host_mapping(unsigned long auxcore)
+{
+	const struct rproc_att *mmap = hostmap;
+
+	while (mmap && mmap->size) {
+		if (mmap->da <= auxcore &&
+		    mmap->da + mmap->size > auxcore)
+			return mmap;
+		mmap++;
+	}
+
+	return NULL;
+}
+
+/*
+ * A very simple elf loader, assumes the image is valid, returns the
+ * entry point address.
+ */
+static unsigned long load_elf_image_phdr(unsigned long addr)
+{
+	Elf32_Ehdr *ehdr; /* ELF header structure pointer */
+	Elf32_Phdr *phdr; /* Program header structure pointer */
+	int i;
+
+	ehdr = (Elf32_Ehdr *)addr;
+	phdr = (Elf32_Phdr *)(addr + ehdr->e_phoff);
+
+	/* Load each program header */
+	for (i = 0; i < ehdr->e_phnum; ++i, ++phdr) {
+		const struct rproc_att *mmap = get_host_mapping(phdr->p_paddr);
+		void *dst, *src;
+
+		if (phdr->p_type != PT_LOAD)
+			continue;
+
+		if (!mmap) {
+			printf("Invalid aux core address: %08x",
+			       phdr->p_paddr);
+			return 0;
+		}
+
+		dst = (void *)(phdr->p_paddr - mmap->da) + mmap->sa;
+		src = (void *)addr + phdr->p_offset;
+
+		debug("Loading phdr %i to 0x%p (%i bytes)\n",
+		      i, dst, phdr->p_filesz);
+
+		if (phdr->p_filesz)
+			memcpy(dst, src, phdr->p_filesz);
+		if (phdr->p_filesz != phdr->p_memsz)
+			memset(dst + phdr->p_filesz, 0x00,
+			       phdr->p_memsz - phdr->p_filesz);
+		flush_cache((unsigned long)dst &
+			    ~(CONFIG_SYS_CACHELINE_SIZE - 1),
+			    ALIGN(phdr->p_filesz, CONFIG_SYS_CACHELINE_SIZE));
+	}
+
+	return ehdr->e_entry;
+}
+#endif
+
+int arch_auxiliary_core_up(u32 core_id, ulong addr)
 {
 	ulong stack, pc;
 
-	if (!boot_private_data)
+	if (!addr)
 		return -EINVAL;
 
-	stack = *(u32 *)boot_private_data;
-	pc = *(u32 *)(boot_private_data + 4);
-
+#ifdef CONFIG_IMX8M
+	stack = *(u32 *)addr;
+	pc = *(u32 *)(addr + 4);
+#else
+	/*
+	 * handling ELF64 binaries
+	 * isn't supported yet.
+	 */
+	if (valid_elf_image(addr)) {
+		stack = 0x0;
+		pc = load_elf_image_phdr(addr);
+		if (!pc)
+			return CMD_RET_FAILURE;
+
+	} else {
+		/*
+		 * Assume binary file with vector table at the beginning.
+		 * Cortex-M4 vector tables start with the stack pointer (SP)
+		 * and reset vector (initial PC).
+		 */
+		stack = *(u32 *)addr;
+		pc = *(u32 *)(addr + 4);
+	}
+#endif
 	printf("## Starting auxiliary core stack = 0x%08lX, pc = 0x%08lX...\n",
 	       stack, pc);
 
diff --git a/arch/arm/mach-imx/mx7/soc.c b/arch/arm/mach-imx/mx7/soc.c
index 35160f4b37..4aafeed188 100644
--- a/arch/arm/mach-imx/mx7/soc.c
+++ b/arch/arm/mach-imx/mx7/soc.c
@@ -193,6 +193,34 @@ static void init_cpu_basic(void)
 #endif
 }
 
+#ifdef CONFIG_IMX_BOOTAUX
+/*
+ * Table of mappings of physical mem regions in both
+ * Cortex-A7 and Cortex-M4 address spaces.
+ *
+ * For additional details check sections 2.1.2 and 2.1.3 in
+ * i.MX7Dual Applications Processor Reference Manual
+ *
+ */
+const struct rproc_att hostmap[] = {
+	/* aux core , host core,  size */
+	{ 0x00000000, 0x00180000, 0x8000 }, /* OCRAM_S */
+	{ 0x00180000, 0x00180000, 0x8000 }, /* OCRAM_S */
+	{ 0x20180000, 0x00180000, 0x8000 }, /* OCRAM_S */
+	{ 0x1fff8000, 0x007f8000, 0x8000 }, /* TCML */
+	{ 0x20000000, 0x00800000, 0x8000 }, /* TCMU */
+	{ 0x00900000, 0x00900000, 0x20000 }, /* OCRAM_128KB */
+	{ 0x20200000, 0x00900000, 0x20000 }, /* OCRAM_128KB */
+	{ 0x00920000, 0x00920000, 0x20000 }, /* OCRAM_EPDC */
+	{ 0x20220000, 0x00920000, 0x20000 }, /* OCRAM_EPDC */
+	{ 0x00940000, 0x00940000, 0x20000 }, /* OCRAM_PXP */
+	{ 0x20240000, 0x00940000, 0x20000 }, /* OCRAM_PXP */
+	{ 0x10000000, 0x80000000, 0x0fff0000 }, /* DDR Code alias */
+	{ 0x80000000, 0x80000000, 0xe0000000 }, /* DDRC */
+	{ /* sentinel */ }
+};
+#endif
+
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
 /* enable all periherial can be accessed in nosec mode */
 static void init_csu(void)
-- 
2.17.1

^ permalink raw reply related	[flat|nested] 2+ messages in thread

* [PATCH v3] mach-imx: bootaux: elf firmware support
  2019-12-30 11:56 [PATCH v3] mach-imx: bootaux: elf firmware support Igor Opaniuk
@ 2020-01-04 11:00 ` sbabic at denx.de
  0 siblings, 0 replies; 2+ messages in thread
From: sbabic at denx.de @ 2020-01-04 11:00 UTC (permalink / raw)
  To: u-boot

> From: Igor Opaniuk <igor.opaniuk@toradex.com>
> Currently imx-specific bootaux command doesn't support ELF format
> firmware for Cortex-M4 core.
> This patches introduces a PoC implementation of handling elf firmware
> (load_elf_image_phdr() was copy-pasted from elf.c just for PoC).
> ELF64 binaries isn't supported yet.
> This has the advantage that the user does not need to know to which
> address the binary has been linked to. However, in order to handle
> and load the elf sections to the right address, we need to translate the
> Cortex-M4 core memory addresses to primary/host CPU memory
> addresses (Cortex A7/A9 cores).
> This allows to boot firmwares from any location with just using
> bootaux, e.g.:
> > tftp ${loadaddr} hello_world.elf && bootaux ${loadaddr}
> Similar translation table can be found in the Linux remoteproc
> driver [1].
> [1] https://elixir.bootlin.com/linux/latest/source/drivers/remoteproc/imx_rproc.c
> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
> Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Applied to u-boot-imx, -next, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2020-01-04 11:00 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-12-30 11:56 [PATCH v3] mach-imx: bootaux: elf firmware support Igor Opaniuk
2020-01-04 11:00 ` sbabic at denx.de

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.