[U-Boot] [PATCH 2/4] arm: mxs: fix comments in arch_cpu_init to match the code

[U-Boot] [PATCH 2/4] arm: mxs: fix comments in arch_cpu_init to match the code

[sbabic at denx.de]

> The comment says to clear the bypass bit, but in fact it sets it, thus
> selecting ref_xtal. And the next line of code does not set the divider
> to 12, but to (the reset value of) 1.
> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Applied to u-boot-imx, -next, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================

[U-Boot] [PATCH 2/4] arm: mxs: fix comments in arch_cpu_init to match the code

[Rasmus Villemoes]

The comment says to clear the bypass bit, but in fact it sets it, thus
selecting ref_xtal. And the next line of code does not set the divider
to 12, but to (the reset value of) 1.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
---
 arch/arm/cpu/arm926ejs/mxs/mxs.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/cpu/arm926ejs/mxs/mxs.c b/arch/arm/cpu/arm926ejs/mxs/mxs.c
index 85c65dcb44..585c53baf6 100644
--- a/arch/arm/cpu/arm926ejs/mxs/mxs.c
+++ b/arch/arm/cpu/arm926ejs/mxs/mxs.c
@@ -98,11 +98,11 @@ int arch_cpu_init(void)
 	/*
 	 * Enable NAND clock
 	 */
-	/* Clear bypass bit */
+	/* Set bypass bit */
 	writel(CLKCTRL_CLKSEQ_BYPASS_GPMI,
 		&clkctrl_regs->hw_clkctrl_clkseq_set);
 
-	/* Set GPMI clock to ref_gpmi / 12 */
+	/* Set GPMI clock to ref_xtal / 1 */
 	clrsetbits_le32(&clkctrl_regs->hw_clkctrl_gpmi,
 		CLKCTRL_GPMI_CLKGATE | CLKCTRL_GPMI_DIV_MASK, 1);
 
-- 
2.20.1