* [PATCH V2 1/2] tpm: add a helper to iterate on all tpm devices
@ 2020-01-09 14:25 Philippe Reynes
2020-01-09 14:25 ` [PATCH V2 2/2] cmd: tpm: add a subcommand device Philippe Reynes
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Philippe Reynes @ 2020-01-09 14:25 UTC (permalink / raw)
To: u-boot
This add a helper for_each_tpm_device that run
through all the tpm (1.x and 2.0) devices.
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
---
include/tpm-common.h | 6 ++++++
1 file changed, 6 insertions(+)
Changelog:
v2:
- new patch, add an helper for tpm device (idea from Miquel)
diff --git a/include/tpm-common.h b/include/tpm-common.h
index f9c2ca2..5b33f47 100644
--- a/include/tpm-common.h
+++ b/include/tpm-common.h
@@ -293,4 +293,10 @@ static inline cmd_tbl_t *get_tpm2_commands(unsigned int *size)
*/
enum tpm_version tpm_get_version(struct udevice *dev);
+/* Iterate on all TPM devices */
+#define for_each_tpm_device(dev) \
+ for (uclass_first_device(UCLASS_TPM, &(dev)); \
+ (dev); \
+ uclass_next_device(&(dev)))
+
#endif /* __TPM_COMMON_H */
--
2.7.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH V2 2/2] cmd: tpm: add a subcommand device
2020-01-09 14:25 [PATCH V2 1/2] tpm: add a helper to iterate on all tpm devices Philippe Reynes
@ 2020-01-09 14:25 ` Philippe Reynes
2020-01-09 14:29 ` Miquel Raynal
2020-01-10 9:39 ` Simon Glass
2020-01-09 14:32 ` [PATCH V2 1/2] tpm: add a helper to iterate on all tpm devices Miquel Raynal
2020-01-10 9:39 ` Simon Glass
2 siblings, 2 replies; 6+ messages in thread
From: Philippe Reynes @ 2020-01-09 14:25 UTC (permalink / raw)
To: u-boot
The command tpm (and tpm2) search the tpm and use it.
On sandbox, there are two tpm (tpm 1.x and tpm 2.0).
So the command tpm and tpm2 are always executed with
the first tpm (tpm 1.x), and the command tpm2 always
fails.
This add a subcommand device to command tpm and
command tpm2. Then the command tpm and tpm2 use
the device selected with the subcommand device.
To be compatible with previous behaviour, if the
subcommand device is not used before a tpm (or tpm2)
command, the device 0 is selected.
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
---
cmd/tpm-common.c | 77 +++++++++++++++++++++++++++++++++++++++++++++++++---
cmd/tpm-user-utils.h | 1 +
cmd/tpm-v1.c | 3 ++
cmd/tpm-v2.c | 3 ++
4 files changed, 80 insertions(+), 4 deletions(-)
Changelog:
v2:
- use helper for tpm device (idea from Miquel)
- don't set tpm in the look (feedback from Miquel)
- add a comment to explain the backward code (feedback from Miquel)
diff --git a/cmd/tpm-common.c b/cmd/tpm-common.c
index 38900fb..42882b1 100644
--- a/cmd/tpm-common.c
+++ b/cmd/tpm-common.c
@@ -12,6 +12,8 @@
#include <tpm-common.h>
#include "tpm-user-utils.h"
+static struct udevice *tpm_dev;
+
/**
* Print a byte string in hexdecimal format, 16-bytes per line.
*
@@ -231,19 +233,86 @@ int type_string_write_vars(const char *type_str, u8 *data,
return 0;
}
+static int tpm_show_device(void)
+{
+ struct udevice *dev;
+ char buf[80];
+ int n = 0, rc;
+
+ for_each_tpm_device(dev) {
+ rc = tpm_get_desc(dev, buf, sizeof(buf));
+ if (rc < 0)
+ printf("device %d: can't get info\n", n);
+ else
+ printf("device %d: %s\n", n, buf);
+
+ n++;
+ };
+
+ return 0;
+}
+
+static int tpm_set_device(unsigned long num)
+{
+ struct udevice *dev;
+ unsigned long n = 0;
+ int rc = CMD_RET_FAILURE;
+
+ for_each_tpm_device(dev) {
+ if (n == num) {
+ rc = 0;
+ break;
+ }
+
+ n++;
+ }
+
+ if (!rc)
+ tpm_dev = dev;
+
+ return rc;
+}
+
int get_tpm(struct udevice **devp)
{
int rc;
- rc = uclass_first_device_err(UCLASS_TPM, devp);
- if (rc) {
- printf("Could not find TPM (ret=%d)\n", rc);
- return CMD_RET_FAILURE;
+ /*
+ * To keep a backward compatibility with previous code,
+ * if a tpm device is not explicitly set, we set the first one.
+ */
+ if (!tpm_dev) {
+ rc = tpm_set_device(0);
+ if (rc) {
+ printf("Couldn't set TPM 0 (rc = %d)\n", rc);
+ return CMD_RET_FAILURE;
+ }
}
+ if (devp)
+ *devp = tpm_dev;
+
return 0;
}
+int do_tpm_device(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+ unsigned long num;
+ int rc;
+
+ if (argc == 2) {
+ num = simple_strtoul(argv[1], NULL, 10);
+
+ rc = tpm_set_device(num);
+ if (rc)
+ printf("Couldn't set TPM %lu (rc = %d)\n", num, rc);
+ } else {
+ rc = tpm_show_device();
+ }
+
+ return rc;
+}
+
int do_tpm_info(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
{
struct udevice *dev;
diff --git a/cmd/tpm-user-utils.h b/cmd/tpm-user-utils.h
index 8ce9861..a851d9c 100644
--- a/cmd/tpm-user-utils.h
+++ b/cmd/tpm-user-utils.h
@@ -17,6 +17,7 @@ int type_string_pack(const char *type_str, char * const values[], u8 *data);
int type_string_write_vars(const char *type_str, u8 *data, char * const vars[]);
int get_tpm(struct udevice **devp);
+int do_tpm_device(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]);
int do_tpm_init(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]);
int do_tpm_info(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]);
int do_tpm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
diff --git a/cmd/tpm-v1.c b/cmd/tpm-v1.c
index 2807331..bc34e06 100644
--- a/cmd/tpm-v1.c
+++ b/cmd/tpm-v1.c
@@ -645,6 +645,7 @@ TPM_COMMAND_NO_ARG(tpm_physical_enable)
TPM_COMMAND_NO_ARG(tpm_physical_disable)
static cmd_tbl_t tpm1_commands[] = {
+ U_BOOT_CMD_MKENT(device, 0, 1, do_tpm_device, "", ""),
U_BOOT_CMD_MKENT(info, 0, 1, do_tpm_info, "", ""),
U_BOOT_CMD_MKENT(init, 0, 1, do_tpm_init, "", ""),
U_BOOT_CMD_MKENT(startup, 0, 1,
@@ -721,6 +722,8 @@ U_BOOT_CMD(tpm, CONFIG_SYS_MAXARGS, 1, do_tpm,
"cmd args...\n"
" - Issue TPM command <cmd> with arguments <args...>.\n"
"Admin Startup and State Commands:\n"
+" device [num device]\n"
+" - Show all devices or set the specified device\n"
" info - Show information about the TPM\n"
" init\n"
" - Put TPM into a state where it waits for 'startup' command.\n"
diff --git a/cmd/tpm-v2.c b/cmd/tpm-v2.c
index 459a955..0cd3982 100644
--- a/cmd/tpm-v2.c
+++ b/cmd/tpm-v2.c
@@ -354,6 +354,7 @@ static int do_tpm_pcr_setauthvalue(cmd_tbl_t *cmdtp, int flag,
}
static cmd_tbl_t tpm2_commands[] = {
+ U_BOOT_CMD_MKENT(device, 0, 1, do_tpm_device, "", ""),
U_BOOT_CMD_MKENT(info, 0, 1, do_tpm_info, "", ""),
U_BOOT_CMD_MKENT(init, 0, 1, do_tpm_init, "", ""),
U_BOOT_CMD_MKENT(startup, 0, 1, do_tpm2_startup, "", ""),
@@ -381,6 +382,8 @@ cmd_tbl_t *get_tpm2_commands(unsigned int *size)
U_BOOT_CMD(tpm2, CONFIG_SYS_MAXARGS, 1, do_tpm, "Issue a TPMv2.x command",
"<command> [<arguments>]\n"
"\n"
+"device [num device]\n"
+" Show all devices or set the specified device\n"
"info\n"
" Show information about the TPM.\n"
"init\n"
--
2.7.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH V2 2/2] cmd: tpm: add a subcommand device
2020-01-09 14:25 ` [PATCH V2 2/2] cmd: tpm: add a subcommand device Philippe Reynes
@ 2020-01-09 14:29 ` Miquel Raynal
2020-01-10 9:39 ` Simon Glass
1 sibling, 0 replies; 6+ messages in thread
From: Miquel Raynal @ 2020-01-09 14:29 UTC (permalink / raw)
To: u-boot
Hi Philippe,
Philippe Reynes <philippe.reynes@softathome.com> wrote on Thu, 9 Jan
2020 15:25:28 +0100:
> The command tpm (and tpm2) search the tpm and use it.
> On sandbox, there are two tpm (tpm 1.x and tpm 2.0).
> So the command tpm and tpm2 are always executed with
> the first tpm (tpm 1.x), and the command tpm2 always
> fails.
>
> This add a subcommand device to command tpm and
> command tpm2. Then the command tpm and tpm2 use
> the device selected with the subcommand device.
>
> To be compatible with previous behaviour, if the
> subcommand device is not used before a tpm (or tpm2)
> command, the device 0 is selected.
>
> Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Thanks,
Miquèl
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH V2 1/2] tpm: add a helper to iterate on all tpm devices
2020-01-09 14:25 [PATCH V2 1/2] tpm: add a helper to iterate on all tpm devices Philippe Reynes
2020-01-09 14:25 ` [PATCH V2 2/2] cmd: tpm: add a subcommand device Philippe Reynes
@ 2020-01-09 14:32 ` Miquel Raynal
2020-01-10 9:39 ` Simon Glass
2 siblings, 0 replies; 6+ messages in thread
From: Miquel Raynal @ 2020-01-09 14:32 UTC (permalink / raw)
To: u-boot
Hi Philippe,
Philippe Reynes <philippe.reynes@softathome.com> wrote on Thu, 9 Jan
2020 15:25:27 +0100:
> This add a helper for_each_tpm_device that run
I think it is either "This adds a helper" or "Add a helper". I think
the later is preferred.
runs?
> through all the tpm (1.x and 2.0) devices.
>
> Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
With the above corrected,
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Thanks,
Miquèl
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH V2 1/2] tpm: add a helper to iterate on all tpm devices
2020-01-09 14:25 [PATCH V2 1/2] tpm: add a helper to iterate on all tpm devices Philippe Reynes
2020-01-09 14:25 ` [PATCH V2 2/2] cmd: tpm: add a subcommand device Philippe Reynes
2020-01-09 14:32 ` [PATCH V2 1/2] tpm: add a helper to iterate on all tpm devices Miquel Raynal
@ 2020-01-10 9:39 ` Simon Glass
2 siblings, 0 replies; 6+ messages in thread
From: Simon Glass @ 2020-01-10 9:39 UTC (permalink / raw)
To: u-boot
On Fri, 10 Jan 2020 at 03:25, Philippe Reynes
<philippe.reynes@softathome.com> wrote:
>
> This add a helper for_each_tpm_device that run
> through all the tpm (1.x and 2.0) devices.
>
> Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
> ---
> include/tpm-common.h | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> Changelog:
> v2:
> - new patch, add an helper for tpm device (idea from Miquel)
>
Reviewed-by: Simon Glass <sjg@chromium.org>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH V2 2/2] cmd: tpm: add a subcommand device
2020-01-09 14:25 ` [PATCH V2 2/2] cmd: tpm: add a subcommand device Philippe Reynes
2020-01-09 14:29 ` Miquel Raynal
@ 2020-01-10 9:39 ` Simon Glass
1 sibling, 0 replies; 6+ messages in thread
From: Simon Glass @ 2020-01-10 9:39 UTC (permalink / raw)
To: u-boot
On Fri, 10 Jan 2020 at 03:25, Philippe Reynes
<philippe.reynes@softathome.com> wrote:
>
> The command tpm (and tpm2) search the tpm and use it.
> On sandbox, there are two tpm (tpm 1.x and tpm 2.0).
> So the command tpm and tpm2 are always executed with
> the first tpm (tpm 1.x), and the command tpm2 always
> fails.
>
> This add a subcommand device to command tpm and
> command tpm2. Then the command tpm and tpm2 use
> the device selected with the subcommand device.
>
> To be compatible with previous behaviour, if the
> subcommand device is not used before a tpm (or tpm2)
> command, the device 0 is selected.
>
> Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
> ---
> cmd/tpm-common.c | 77 +++++++++++++++++++++++++++++++++++++++++++++++++---
> cmd/tpm-user-utils.h | 1 +
> cmd/tpm-v1.c | 3 ++
> cmd/tpm-v2.c | 3 ++
> 4 files changed, 80 insertions(+), 4 deletions(-)
>
> Changelog:
> v2:
> - use helper for tpm device (idea from Miquel)
> - don't set tpm in the look (feedback from Miquel)
> - add a comment to explain the backward code (feedback from Miquel)
>
Reviewed-by: Simon Glass <sjg@chromium.org>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-01-10 9:39 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-09 14:25 [PATCH V2 1/2] tpm: add a helper to iterate on all tpm devices Philippe Reynes
2020-01-09 14:25 ` [PATCH V2 2/2] cmd: tpm: add a subcommand device Philippe Reynes
2020-01-09 14:29 ` Miquel Raynal
2020-01-10 9:39 ` Simon Glass
2020-01-09 14:32 ` [PATCH V2 1/2] tpm: add a helper to iterate on all tpm devices Miquel Raynal
2020-01-10 9:39 ` Simon Glass
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.