[GIT PULL] Qualcomm ARM64 DT updates for v5.6

* [GIT PULL] Qualcomm ARM64 DT updates for v5.6
@ 2020-01-13 20:42 ` Bjorn Andersson
  0 siblings, 0 replies; 2+ messages in thread
From: Bjorn Andersson @ 2020-01-13 20:42 UTC (permalink / raw)
  To: arm, soc
  Cc: linux-arm-msm, linux-arm-kernel, Andy Gross, Arnd Bergmann,
	Olof Johansson, Kevin Hilman, Bjorn Andersson, Douglas Anderson,
	Sibi Sankar, Jeffrey Hugo, Vinod Koul, Sai Prakash Ranjan,
	Amit Kucheria, Jorge Ramirez-Ortiz, Maulik Shah, Rajendra Nayak,
	Kiran Gunda, Lina Iyer, Loic Poulain, Niklas Cassel, Rajeshwari,
	Taniya Das, AngeloGioacchino Del Regno, Manu Gautam,
	Matthias Kaehlcke, Rob Clark, Roja Rani Yarubandi,
	Sandeep Maheswaram, Stanimir Varbanov, Stephan Gerhold,
	Stephen Boyd, Vivek Gautam

The following changes since commit e42617b825f8073569da76dc4510bfa019b1c35a:

  Linux 5.5-rc1 (2019-12-08 14:57:55 -0800)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git tags/qcom-arm64-for-5.6

for you to fetch changes up to f489b13dae02a0217b9702913074526d3669bdc8:

  arm64: dts: qcom: sdm845: move gpu zap nodes to per-device dts (2020-01-13 11:45:51 -0800)

----------------------------------------------------------------
Qualcomm ARM64 DT updates for v5.6

* Align SDM845 firmware paths with linux-firmware
* Make WiFi work on Dragonboard845c
* Wire up wakeup controller for SDM845
* Critical thermal interrupt support for SDM845, MSM8996 and MSM8998
* Enable UFS for SM8150
* Add remoteproc enablers and nodes for SM8150
* Add CPUfreq for SM8150
* Add RPMH power-domain node for SM8150
* Cleanup and refactor MSM8996 dts structure
* Add initial Inforce Computing IFC6640 dts
* Increase MSM8996 core voltage
* Fix MSM8996 USB phy settings
* Add missing alias for BLSP UART in MSM8998 MTP
* Add remoteproc nodes for ADSP, modem and sensor core for MSM8998
* Enable WiFI for MSM8998
* Introduce the SC7180 platform and the IDP development board
* Add CPUfreq, QUPs, USB, remoteproc etc for SC7180
* Enable USB OTG for Dragonboard 410c
* Add vibrator motor node for PM8916
* Properly specify APCS clocks for MSM8916
* Add CPR and HFPLL for QCS404
* Enable full CPUfreq (with AVS) for QCS404

----------------------------------------------------------------
Amit Kucheria (4):
      arm64: dts: sdm845: thermal: Add critical interrupt support
      arm64: dts: msm8916: thermal: Add interrupt support
      arm64: dts: msm8996: thermal: Add critical interrupt support
      arm64: dts: msm8998: thermal: Add critical interrupt support

AngeloGioacchino Del Regno (1):
      arm64: dts: pm8004: Add SPMI regulator and add phandles to lsids

Bjorn Andersson (15):
      arm64: dts: qcom: db845c: Enable ath10k 8bit host-cap quirk
      arm64: dts: qcom: db820c: Move non-soc entries out of /soc
      arm64: dts: qcom: msm8996: Use node references in db820c
      arm64: dts: qcom: msm8996: Move regulator consumers to db820c
      arm64: dts: qcom: msm8996: Move regulators to db820c
      arm64: dts: qcom: db820c: Group root nodes
      arm64: dts: qcom: db820c: Sort all nodes
      arm64: dts: qcom: db820c: Remove pin specific files
      arm64: dts: qcom: msm8996: Pad addresses
      arm64: dts: qcom: msm8996: Sort all nodes in msm8996.dtsi
      arm64: dts: qcom: db820c: Use regulator names from schematics
      arm64: dts: qcom: msm8996: Introduce IFC6640
      arm64: dts: qcom: db845c: Move remoteproc firmware to sdm845
      arm64: dts: qcom: msm8998-mtp: Add alias for blsp1_uart3
      arm64: dts: qcom: sm8150: Hard code rpmhpd constants

Douglas Anderson (9):
      arm64: dts: sc7180: Fix indentation/ordering of qspi nodes in sc7180-idp
      arm64: dts: sc7180: Add a comment to i2c7 about external pullup
      arm64: dts: qcom: sc7180: Add SoC name to compatible
      arm64: dts: qcom: sc7180: Rename gic-its node to msi-controller
      arm64: dts: qcom: sc7180: Add "#clock-cells" property to usb_1_ssphy
      arm64: dts: qcom: pm6150: Remove macro from unit name of adc-chan
      arm64: dts: qcom: sc7180: Avoid "phy" for USB QMP PHY wrapper
      arm64: dts: qcom: sc7180: Fix I2C/UART numbers 2, 4, 7, and 9
      arm64: dts: qcom: sdm845: Rename gic-its node to msi-controller

Jeffrey Hugo (6):
      arm64: dts: qcom: msm8998: Add anoc2 smmu node
      arm64: dts: qcom: msm8998: Add wifi node
      arm64: dts: qcom: msm8998: Fix tcsr syscon size
      arm64: dts: qcom: msm8998: Add gpucc node
      arm64: dts: qcom: msm8998: Fixup uart3 gpio config for bluetooth
      arm64: dts: msm8998-clamshell: Add pm8005_s1 regulator

Jorge Ramirez-Ortiz (4):
      arm64: dts: qcom: msm8916: Add the clocks for the APCS mux/divider
      arm64: dts: qcom: qcs404: Add HFPLL node
      arm64: dts: qcom: qcs404: Add the clocks for APCS mux/divider
      arm64: dts: qcom: qcs404: Add DVFS support

Kiran Gunda (3):
      arm64: dts: qcom: sc7180: Add SPMI PMIC arbiter device
      arm64: dts: qcom: pm6150: Add PM6150/PM6150L PMIC peripherals
      arm64: dts: qcom: sc7180-idp: Add RPMh regulators

Lina Iyer (2):
      arm64: dts: qcom: add PDC interrupt controller for SDM845
      arm64: dts: qcom: setup PDC as the wakeup parent for TLMM on SDM845

Loic Poulain (2):
      arm: dts: qcom: db410c: Enable USB OTG support
      arm64: dts: apq8096-db820c: Fix VDD core voltage

Manu Gautam (1):
      arm64: dts: qcom: msm8996: Disable USB2 PHY suspend by core

Matthias Kaehlcke (1):
      arm64: dts: qcom: sc7180: Fix node order

Maulik Shah (4):
      arm64: dts: qcom: sc7180: Add cmd_db reserved area
      arm64: dts: qcom: sc7180: Add rpmh-rsc node
      arm64: dts: qcom: sc7180: Add pdc interrupt controller
      arm64: dts: qcom: sc7180: Add wakeup parent for TLMM

Niklas Cassel (2):
      arm64: dts: qcom: qcs404: Add CPR and populate OPP table
      arm64: dts: qcom: qcs404-evb: Set vdd_apc regulator in high power mode

Rajendra Nayak (4):
      dt-bindings: qcom: Add SC7180 bindings
      arm64: dts: sc7180: Add minimal dts/dtsi files for SC7180 soc
      arm64: dts: sc7180: Remove additional spi chip select muxes
      arm64: dts: sc7180: Add aliases for all i2c and spi devices

Rajeshwari (2):
      arm64: dts: qcom: sc7180: Add device node support for TSENS in SC7180
      arm64: dts: qcom: sc7180: Add critical interrupt and cooling maps for TSENS in SC7180

Rob Clark (1):
      arm64: dts: qcom: sdm845: move gpu zap nodes to per-device dts

Roja Rani Yarubandi (1):
      arm64: dts: sc7180: Add qupv3_0 and qupv3_1

Sai Prakash Ranjan (5):
      arm64: dts: sdm845: Update the device tree node for LLCC
      arm64: dts: qcom: sc7180: Add APSS watchdog node
      arm64: dts: qcom: sm8150: Add APSS watchdog node
      arm64: dts: qcom: sc7180: Add Last level cache controller node
      arm64: dts: qcom: qcs404: Update the compatible for watchdog timer

Sandeep Maheswaram (1):
      arm64: dts: qcom: sc7180: Add USB related nodes

Sibi Sankar (8):
      arm64: dts: sm8150: Add rpmh power-domain node
      arm64: dts: qcom: sm8150: Add ADSP, CDSP, MPSS and SLPI smp2p
      arm64: dts: qcom: sm8150: Add ADSP, CDSP, MPSS and SLPI remoteprocs
      arm64: dts: qcom: sm8150: Add cpufreq HW device node
      arm64: dts: qcom: sc7180: Add remoteproc enablers
      arm64: dts: qcom: msm8998: Update reserved memory map
      arm64: dts: qcom: msm8998: Add ADSP, MPSS and SLPI nodes
      arm64: dts: qcom: sc7180: Add rpmh power-domain node

Stanimir Varbanov (1):
      arm64: dts: qcom: msm8996: Fix venus iommu nodename error

Stephan Gerhold (1):
      arm64: dts: qcom: pm8916: Add vibration motor node

Stephen Boyd (1):
      arm64: dts: qcom: sdm845-cheza: Add cr50 spi node

Taniya Das (2):
      arm64: dts: qcom: SC7180: Add node for rpmhcc clock driver
      arm64: dts: sc7180: Add cpufreq HW node for cpu scaling

Vinod Koul (6):
      arm64: dts: qcom: Use gcc clock enums
      arm64: dts: qcom: sm8150: Add ufs nodes
      arm64: dts: qcom: sm8150-mtp: Enable UFS nodes
      arm64: dts: qcom: sm8150-mtp: Add UFS gpio reset
      arm64: dts: qcom: sm8150: Fix UFS phy register size
      arm64: dts: qcom: sdm845: add the ufs reset

Vivek Gautam (1):
      arm64: dts: sc7180: Add device node for apps_smmu

 Documentation/devicetree/bindings/arm/qcom.yaml    |   44 +-
 arch/arm64/boot/dts/qcom/Makefile                  |    2 +
 .../arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi |   19 +
 arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi          |   11 +-
 arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi  |  109 -
 .../boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi    |   92 -
 arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi       | 1408 +++++---
 arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts       |  385 +++
 arch/arm64/boot/dts/qcom/msm8916.dtsi              |    5 +-
 arch/arm64/boot/dts/qcom/msm8996.dtsi              | 3530 ++++++++++----------
 arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi    |   49 +
 arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi          |   41 +
 arch/arm64/boot/dts/qcom/msm8998-pins.dtsi         |   25 +-
 arch/arm64/boot/dts/qcom/msm8998.dtsi              |  262 +-
 arch/arm64/boot/dts/qcom/pm6150.dtsi               |   72 +
 arch/arm64/boot/dts/qcom/pm6150l.dtsi              |   31 +
 arch/arm64/boot/dts/qcom/pm8004.dtsi               |   10 +-
 arch/arm64/boot/dts/qcom/pm8916.dtsi               |    6 +
 arch/arm64/boot/dts/qcom/pm8994.dtsi               |    4 +
 arch/arm64/boot/dts/qcom/qcs404-evb.dtsi           |    1 +
 arch/arm64/boot/dts/qcom/qcs404.dtsi               |  160 +-
 arch/arm64/boot/dts/qcom/sc7180-idp.dts            |  430 +++
 arch/arm64/boot/dts/qcom/sc7180.dtsi               | 2187 ++++++++++++
 arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi         |   15 +-
 arch/arm64/boot/dts/qcom/sdm845-db845c.dts         |   18 +-
 arch/arm64/boot/dts/qcom/sdm845-mtp.dts            |    7 +
 arch/arm64/boot/dts/qcom/sdm845.dtsi               |   32 +-
 .../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts      |    7 +
 arch/arm64/boot/dts/qcom/sm8150-mtp.dts            |   35 +
 arch/arm64/boot/dts/qcom/sm8150.dtsi               |  391 ++-
 30 files changed, 6766 insertions(+), 2622 deletions(-)
 delete mode 100644 arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi
 delete mode 100644 arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts
 create mode 100644 arch/arm64/boot/dts/qcom/pm6150.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/pm6150l.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/sc7180-idp.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sc7180.dtsi

^ permalink raw reply	[flat|nested] 2+ messages in thread