[PATCH v8 8/8] drm/panel: support for auo,b101uan08.3 wuxga dsi video mode panel

[Jitao Shi <jitao.shi@mediatek.com>]

Auo,auo,b101uan08.3's connector is same as boe,tv101wum-nl6.
The most codes can be reuse.
So auo,b101uan08.3 and boe,tv101wum-nl6 use one driver file.
Add the different parts in driver data.

Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
---
 .../gpu/drm/panel/panel-boe-tv101wum-nl6.c    | 78 +++++++++++++++++++
 1 file changed, 78 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
index 0108bff283c5..51001940eab3 100644
--- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
+++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
@@ -377,6 +377,53 @@ static const struct panel_init_cmd auo_kd101n80_45na_init_cmd[] = {
 	{},
 };
 
+static const struct panel_init_cmd auo_b101uan08_3_init_cmd[] = {
+	_INIT_DELAY_CMD(24),
+	_INIT_DCS_CMD(0xB0, 0x01),
+	_INIT_DCS_CMD(0xC0, 0x48),
+	_INIT_DCS_CMD(0xC1, 0x48),
+	_INIT_DCS_CMD(0xC2, 0x47),
+	_INIT_DCS_CMD(0xC3, 0x47),
+	_INIT_DCS_CMD(0xC4, 0x46),
+	_INIT_DCS_CMD(0xC5, 0x46),
+	_INIT_DCS_CMD(0xC6, 0x45),
+	_INIT_DCS_CMD(0xC7, 0x45),
+	_INIT_DCS_CMD(0xC8, 0x64),
+	_INIT_DCS_CMD(0xC9, 0x64),
+	_INIT_DCS_CMD(0xCA, 0x4F),
+	_INIT_DCS_CMD(0xCB, 0x4F),
+	_INIT_DCS_CMD(0xCC, 0x40),
+	_INIT_DCS_CMD(0xCD, 0x40),
+	_INIT_DCS_CMD(0xCE, 0x66),
+	_INIT_DCS_CMD(0xCF, 0x66),
+	_INIT_DCS_CMD(0xD0, 0x4F),
+	_INIT_DCS_CMD(0xD1, 0x4F),
+	_INIT_DCS_CMD(0xD2, 0x41),
+	_INIT_DCS_CMD(0xD3, 0x41),
+	_INIT_DCS_CMD(0xD4, 0x48),
+	_INIT_DCS_CMD(0xD5, 0x48),
+	_INIT_DCS_CMD(0xD6, 0x47),
+	_INIT_DCS_CMD(0xD7, 0x47),
+	_INIT_DCS_CMD(0xD8, 0x46),
+	_INIT_DCS_CMD(0xD9, 0x46),
+	_INIT_DCS_CMD(0xDA, 0x45),
+	_INIT_DCS_CMD(0xDB, 0x45),
+	_INIT_DCS_CMD(0xDC, 0x64),
+	_INIT_DCS_CMD(0xDD, 0x64),
+	_INIT_DCS_CMD(0xDE, 0x4F),
+	_INIT_DCS_CMD(0xDF, 0x4F),
+	_INIT_DCS_CMD(0xE0, 0x40),
+	_INIT_DCS_CMD(0xE1, 0x40),
+	_INIT_DCS_CMD(0xE2, 0x66),
+	_INIT_DCS_CMD(0xE3, 0x66),
+	_INIT_DCS_CMD(0xE4, 0x4F),
+	_INIT_DCS_CMD(0xE5, 0x4F),
+	_INIT_DCS_CMD(0xE6, 0x41),
+	_INIT_DCS_CMD(0xE7, 0x41),
+	_INIT_DELAY_CMD(150),
+	{},
+};
+
 static inline struct boe_panel *to_boe_panel(struct drm_panel *panel)
 {
 	return container_of(panel, struct boe_panel, base);
@@ -621,6 +668,34 @@ static const struct panel_desc boe_tv101wum_n53_desc = {
 	.init_cmds = boe_init_cmd,
 };
 
+static const struct drm_display_mode auo_b101uan08_3_default_mode = {
+	.clock = 159667,
+	.hdisplay = 1200,
+	.hsync_start = 1200 + 60,
+	.hsync_end = 1200 + 60 + 4,
+	.htotal = 1200 + 60 + 4 + 80,
+	.vdisplay = 1920,
+	.vsync_start = 1920 + 34,
+	.vsync_end = 1920 + 34 + 2,
+	.vtotal = 1920 + 34 + 2 + 24,
+	.vrefresh = 60,
+	.type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
+};
+
+static const struct panel_desc auo_b101uan08_3_desc = {
+	.modes = &auo_b101uan08_3_default_mode,
+	.bpc = 8,
+	.size = {
+		.width_mm = 135,
+		.height_mm = 216,
+	},
+	.lanes = 4,
+	.format = MIPI_DSI_FMT_RGB888,
+	.mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
+		      MIPI_DSI_MODE_LPM,
+	.init_cmds = auo_b101uan08_3_init_cmd,
+};
+
 static int boe_panel_get_modes(struct drm_panel *panel,
 			       struct drm_connector *connector)
 {
@@ -756,6 +831,9 @@ static const struct of_device_id boe_of_match[] = {
 	{ .compatible = "boe,tv101wum-n53",
 	  .data = &boe_tv101wum_n53_desc
 	},
+	{ .compatible = "auo,b101uan08.3",
+	  .data = &auo_b101uan08_3_desc
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, boe_of_match);
-- 
2.21.0