* [PATCH V6 0/2] irqchip: add NXP INTMUX interrupt controller
@ 2020-01-17 6:10 ` Joakim Zhang
0 siblings, 0 replies; 10+ messages in thread
From: Joakim Zhang @ 2020-01-17 6:10 UTC (permalink / raw)
To: maz, jason, tglx, robh+dt, mark.rutland, shawnguo, s.hauer, robh
Cc: kernel, festevam, linux-kernel, devicetree, linux-arm-kernel,
dl-linux-imx, Andy Duan
This patch set adds driver for NXP INTMUX interrupt controller.
ChangeLogs:
V5->V6:
*fix DTC check failure from binding file.
V4->V5:
*get number of channels by platform_irq_count() instead of
'fsl,intmux_chans' property
*update binding files and remove 'fsl,intmux_chans' property.
V3->V4:
*set IRQ_TYPE_LEVEL_HIGH flag in .xlate callback.
*fix comment format.
*use an intermediate variable for irq_domain_add_linear().
*disable interrupts before enabling chained interrupt.
*disable interrupt in imx_remove() for level interrupt.
*convert binding to DT schema.
V2->V3:
*impletement .xlate and .select callback.
V1->V2:
*squash patches:
drivers/irqchip: enable INTMUX interrupt controller driver
drivers/irqchip: add NXP INTMUX interrupt multiplexer support
*remove properity "fsl,intmux_chans", only support channel 0 by
default.
*delete two unused macros.
*align the various field in struct intmux_data.
*turn to spin lock _irqsave version.
*delete struct intmux_irqchip_data.
*disable interrupt in probe stage and clear pending status in remove
stage.
Joakim Zhang (2):
dt-bindings/irq: add binding for NXP INTMUX interrupt multiplexer
drivers/irqchip: add NXP INTMUX interrupt multiplexer support
.../interrupt-controller/fsl,intmux.yaml | 68 ++++
drivers/irqchip/Kconfig | 6 +
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-imx-intmux.c | 309 ++++++++++++++++++
4 files changed, 384 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml
create mode 100644 drivers/irqchip/irq-imx-intmux.c
--
2.17.1
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH V6 0/2] irqchip: add NXP INTMUX interrupt controller
@ 2020-01-17 6:10 ` Joakim Zhang
0 siblings, 0 replies; 10+ messages in thread
From: Joakim Zhang @ 2020-01-17 6:10 UTC (permalink / raw)
To: maz, jason, tglx, robh+dt, mark.rutland, shawnguo, s.hauer, robh
Cc: devicetree, Andy Duan, linux-kernel, dl-linux-imx, kernel,
festevam, linux-arm-kernel
This patch set adds driver for NXP INTMUX interrupt controller.
ChangeLogs:
V5->V6:
*fix DTC check failure from binding file.
V4->V5:
*get number of channels by platform_irq_count() instead of
'fsl,intmux_chans' property
*update binding files and remove 'fsl,intmux_chans' property.
V3->V4:
*set IRQ_TYPE_LEVEL_HIGH flag in .xlate callback.
*fix comment format.
*use an intermediate variable for irq_domain_add_linear().
*disable interrupts before enabling chained interrupt.
*disable interrupt in imx_remove() for level interrupt.
*convert binding to DT schema.
V2->V3:
*impletement .xlate and .select callback.
V1->V2:
*squash patches:
drivers/irqchip: enable INTMUX interrupt controller driver
drivers/irqchip: add NXP INTMUX interrupt multiplexer support
*remove properity "fsl,intmux_chans", only support channel 0 by
default.
*delete two unused macros.
*align the various field in struct intmux_data.
*turn to spin lock _irqsave version.
*delete struct intmux_irqchip_data.
*disable interrupt in probe stage and clear pending status in remove
stage.
Joakim Zhang (2):
dt-bindings/irq: add binding for NXP INTMUX interrupt multiplexer
drivers/irqchip: add NXP INTMUX interrupt multiplexer support
.../interrupt-controller/fsl,intmux.yaml | 68 ++++
drivers/irqchip/Kconfig | 6 +
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-imx-intmux.c | 309 ++++++++++++++++++
4 files changed, 384 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml
create mode 100644 drivers/irqchip/irq-imx-intmux.c
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH V6 1/2] dt-bindings/irq: add binding for NXP INTMUX interrupt multiplexer
2020-01-17 6:10 ` Joakim Zhang
@ 2020-01-17 6:10 ` Joakim Zhang
-1 siblings, 0 replies; 10+ messages in thread
From: Joakim Zhang @ 2020-01-17 6:10 UTC (permalink / raw)
To: maz, jason, tglx, robh+dt, mark.rutland, shawnguo, s.hauer, robh
Cc: kernel, festevam, linux-kernel, devicetree, linux-arm-kernel,
dl-linux-imx, Andy Duan
This patch adds the DT bindings for the NXP INTMUX interrupt multiplexer
for i.MX8 family SoCs.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
---
.../interrupt-controller/fsl,intmux.yaml | 68 +++++++++++++++++++
1 file changed, 68 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml
new file mode 100644
index 000000000000..43c6effbb5bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,intmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale INTMUX interrupt multiplexer
+
+maintainers:
+ - Joakim Zhang <qiangqing.zhang@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx-intmux
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ maxItems: 8
+ description: |
+ Should contain the parent interrupt lines (up to 8) used to multiplex
+ the input interrupts.
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+ description: |
+ The 1st cell is hw interrupt number, the 2nd cell is channel index.
+
+ clocks:
+ description: ipg clock.
+
+ clock-names:
+ const: ipg
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ interrupt-controller@37400000 {
+ compatible = "fsl,imx-intmux";
+ reg = <0x37400000 0x1000>;
+ interrupts = <0 16 4>,
+ <0 17 4>,
+ <0 18 4>,
+ <0 19 4>,
+ <0 20 4>,
+ <0 21 4>,
+ <0 22 4>,
+ <0 23 4>;
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ #interrupt-cells = <2>;
+ clocks = <&clk>;
+ clock-names = "ipg";
+ };
--
2.17.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH V6 1/2] dt-bindings/irq: add binding for NXP INTMUX interrupt multiplexer
@ 2020-01-17 6:10 ` Joakim Zhang
0 siblings, 0 replies; 10+ messages in thread
From: Joakim Zhang @ 2020-01-17 6:10 UTC (permalink / raw)
To: maz, jason, tglx, robh+dt, mark.rutland, shawnguo, s.hauer, robh
Cc: devicetree, Andy Duan, linux-kernel, dl-linux-imx, kernel,
festevam, linux-arm-kernel
This patch adds the DT bindings for the NXP INTMUX interrupt multiplexer
for i.MX8 family SoCs.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
---
.../interrupt-controller/fsl,intmux.yaml | 68 +++++++++++++++++++
1 file changed, 68 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml
new file mode 100644
index 000000000000..43c6effbb5bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,intmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale INTMUX interrupt multiplexer
+
+maintainers:
+ - Joakim Zhang <qiangqing.zhang@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx-intmux
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ maxItems: 8
+ description: |
+ Should contain the parent interrupt lines (up to 8) used to multiplex
+ the input interrupts.
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+ description: |
+ The 1st cell is hw interrupt number, the 2nd cell is channel index.
+
+ clocks:
+ description: ipg clock.
+
+ clock-names:
+ const: ipg
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ interrupt-controller@37400000 {
+ compatible = "fsl,imx-intmux";
+ reg = <0x37400000 0x1000>;
+ interrupts = <0 16 4>,
+ <0 17 4>,
+ <0 18 4>,
+ <0 19 4>,
+ <0 20 4>,
+ <0 21 4>,
+ <0 22 4>,
+ <0 23 4>;
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ #interrupt-cells = <2>;
+ clocks = <&clk>;
+ clock-names = "ipg";
+ };
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH V6 2/2] drivers/irqchip: add NXP INTMUX interrupt multiplexer support
2020-01-17 6:10 ` Joakim Zhang
@ 2020-01-17 6:10 ` Joakim Zhang
-1 siblings, 0 replies; 10+ messages in thread
From: Joakim Zhang @ 2020-01-17 6:10 UTC (permalink / raw)
To: maz, jason, tglx, robh+dt, mark.rutland, shawnguo, s.hauer, robh
Cc: kernel, festevam, linux-kernel, devicetree, linux-arm-kernel,
dl-linux-imx, Andy Duan
The Interrupt Multiplexer (INTMUX) expands the number of peripherals
that can interrupt the core:
* The INTMUX has 8 channels that are assigned to 8 NVIC interrupt slots.
* Each INTMUX channel can receive up to 32 interrupt sources and has 1
interrupt output.
* The INTMUX routes the interrupt sources to the interrupt outputs.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
---
drivers/irqchip/Kconfig | 6 +
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-imx-intmux.c | 309 +++++++++++++++++++++++++++++++
3 files changed, 316 insertions(+)
create mode 100644 drivers/irqchip/irq-imx-intmux.c
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index ba152954324b..7e2b1e9d0b45 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -457,6 +457,12 @@ config IMX_IRQSTEER
help
Support for the i.MX IRQSTEER interrupt multiplexer/remapper.
+config IMX_INTMUX
+ def_bool y if ARCH_MXC
+ select IRQ_DOMAIN
+ help
+ Support for the i.MX INTMUX interrupt multiplexer.
+
config LS1X_IRQ
bool "Loongson-1 Interrupt Controller"
depends on MACH_LOONGSON32
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index e806dda690ea..af976a79d1fb 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -100,6 +100,7 @@ obj-$(CONFIG_CSKY_MPINTC) += irq-csky-mpintc.o
obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o
obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o
obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o
+obj-$(CONFIG_IMX_INTMUX) += irq-imx-intmux.o
obj-$(CONFIG_MADERA_IRQ) += irq-madera.o
obj-$(CONFIG_LS1X_IRQ) += irq-ls1x.o
obj-$(CONFIG_TI_SCI_INTR_IRQCHIP) += irq-ti-sci-intr.o
diff --git a/drivers/irqchip/irq-imx-intmux.c b/drivers/irqchip/irq-imx-intmux.c
new file mode 100644
index 000000000000..c27577c81126
--- /dev/null
+++ b/drivers/irqchip/irq-imx-intmux.c
@@ -0,0 +1,309 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright 2017 NXP
+
+/* INTMUX Block Diagram
+ *
+ * ________________
+ * interrupt source # 0 +---->| |
+ * | | |
+ * interrupt source # 1 +++-->| |
+ * ... | | | channel # 0 |--------->interrupt out # 0
+ * ... | | | |
+ * ... | | | |
+ * interrupt source # X-1 +++-->|________________|
+ * | | |
+ * | | |
+ * | | | ________________
+ * +---->| |
+ * | | | | |
+ * | +-->| |
+ * | | | | channel # 1 |--------->interrupt out # 1
+ * | | +>| |
+ * | | | | |
+ * | | | |________________|
+ * | | |
+ * | | |
+ * | | | ...
+ * | | | ...
+ * | | |
+ * | | | ________________
+ * +---->| |
+ * | | | |
+ * +-->| |
+ * | | channel # N |--------->interrupt out # N
+ * +>| |
+ * | |
+ * |________________|
+ *
+ *
+ * N: Interrupt Channel Instance Number (N=7)
+ * X: Interrupt Source Number for each channel (X=32)
+ *
+ * The INTMUX interrupt multiplexer has 8 channels, each channel receives 32
+ * interrupt sources and generates 1 interrupt output.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/kernel.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/spinlock.h>
+
+#define CHANIER(n) (0x10 + (0x40 * n))
+#define CHANIPR(n) (0x20 + (0x40 * n))
+
+#define CHAN_MAX_NUM 0x8
+
+struct intmux_irqchip_data {
+ int chanidx;
+ int irq;
+ struct irq_domain *domain;
+};
+
+struct intmux_data {
+ raw_spinlock_t lock;
+ void __iomem *regs;
+ struct clk *ipg_clk;
+ int channum;
+ struct intmux_irqchip_data irqchip_data[];
+};
+
+static void imx_intmux_irq_mask(struct irq_data *d)
+{
+ struct intmux_irqchip_data *irqchip_data = d->chip_data;
+ int idx = irqchip_data->chanidx;
+ struct intmux_data *data = container_of(irqchip_data, struct intmux_data,
+ irqchip_data[idx]);
+ unsigned long flags;
+ void __iomem *reg;
+ u32 val;
+
+ raw_spin_lock_irqsave(&data->lock, flags);
+ reg = data->regs + CHANIER(idx);
+ val = readl_relaxed(reg);
+ /* disable the interrupt source of this channel */
+ val &= ~BIT(d->hwirq);
+ writel_relaxed(val, reg);
+ raw_spin_unlock_irqrestore(&data->lock, flags);
+}
+
+static void imx_intmux_irq_unmask(struct irq_data *d)
+{
+ struct intmux_irqchip_data *irqchip_data = d->chip_data;
+ int idx = irqchip_data->chanidx;
+ struct intmux_data *data = container_of(irqchip_data, struct intmux_data,
+ irqchip_data[idx]);
+ unsigned long flags;
+ void __iomem *reg;
+ u32 val;
+
+ raw_spin_lock_irqsave(&data->lock, flags);
+ reg = data->regs + CHANIER(idx);
+ val = readl_relaxed(reg);
+ /* enable the interrupt source of this channel */
+ val |= BIT(d->hwirq);
+ writel_relaxed(val, reg);
+ raw_spin_unlock_irqrestore(&data->lock, flags);
+}
+
+static struct irq_chip imx_intmux_irq_chip = {
+ .name = "intmux",
+ .irq_mask = imx_intmux_irq_mask,
+ .irq_unmask = imx_intmux_irq_unmask,
+};
+
+static int imx_intmux_irq_map(struct irq_domain *h, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ irq_set_chip_data(irq, h->host_data);
+ irq_set_chip_and_handler(irq, &imx_intmux_irq_chip, handle_level_irq);
+
+ return 0;
+}
+
+static int imx_intmux_irq_xlate(struct irq_domain *d, struct device_node *node,
+ const u32 *intspec, unsigned int intsize,
+ unsigned long *out_hwirq, unsigned int *out_type)
+{
+ struct intmux_irqchip_data *irqchip_data = d->host_data;
+ int idx = irqchip_data->chanidx;
+ struct intmux_data *data = container_of(irqchip_data, struct intmux_data,
+ irqchip_data[idx]);
+
+ /*
+ * two cells needed in interrupt specifier:
+ * the 1st cell: hw interrupt number
+ * the 2nd cell: channel index
+ */
+ if (WARN_ON(intsize != 2))
+ return -EINVAL;
+
+ if (WARN_ON(intspec[1] >= data->channum))
+ return -EINVAL;
+
+ *out_hwirq = intspec[0];
+ *out_type = IRQ_TYPE_LEVEL_HIGH;
+
+ return 0;
+}
+
+static int imx_intmux_irq_select(struct irq_domain *d, struct irq_fwspec *fwspec,
+ enum irq_domain_bus_token bus_token)
+{
+ struct intmux_irqchip_data *irqchip_data = d->host_data;
+
+ /* Not for us */
+ if (fwspec->fwnode != d->fwnode)
+ return false;
+
+ return irqchip_data->chanidx == fwspec->param[1];
+}
+
+static const struct irq_domain_ops imx_intmux_domain_ops = {
+ .map = imx_intmux_irq_map,
+ .xlate = imx_intmux_irq_xlate,
+ .select = imx_intmux_irq_select,
+};
+
+static void imx_intmux_irq_handler(struct irq_desc *desc)
+{
+ struct intmux_irqchip_data *irqchip_data = irq_desc_get_handler_data(desc);
+ int idx = irqchip_data->chanidx;
+ struct intmux_data *data = container_of(irqchip_data, struct intmux_data,
+ irqchip_data[idx]);
+ unsigned long irqstat;
+ int pos, virq;
+
+ chained_irq_enter(irq_desc_get_chip(desc), desc);
+
+ /* read the interrupt source pending status of this channel */
+ irqstat = readl_relaxed(data->regs + CHANIPR(idx));
+
+ for_each_set_bit(pos, &irqstat, 32) {
+ virq = irq_find_mapping(irqchip_data->domain, pos);
+ if (virq)
+ generic_handle_irq(virq);
+ }
+
+ chained_irq_exit(irq_desc_get_chip(desc), desc);
+}
+
+static int imx_intmux_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct irq_domain *domain;
+ struct intmux_data *data;
+ int channum;
+ int i, ret;
+
+ channum = platform_irq_count(pdev);
+ if (channum == -EPROBE_DEFER) {
+ return -EPROBE_DEFER;
+ } else if (channum > CHAN_MAX_NUM) {
+ dev_err(&pdev->dev, "supports up to %d multiplex channels\n",
+ CHAN_MAX_NUM);
+ return -EINVAL;
+ }
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data) +
+ channum * sizeof(data->irqchip_data[0]), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(data->regs)) {
+ dev_err(&pdev->dev, "failed to initialize reg\n");
+ return PTR_ERR(data->regs);
+ }
+
+ data->ipg_clk = devm_clk_get(&pdev->dev, "ipg");
+ if (IS_ERR(data->ipg_clk)) {
+ ret = PTR_ERR(data->ipg_clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "failed to get ipg clk: %d\n", ret);
+ return ret;
+ }
+
+ data->channum = channum;
+ raw_spin_lock_init(&data->lock);
+
+ ret = clk_prepare_enable(data->ipg_clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable ipg clk: %d\n", ret);
+ return ret;
+ }
+
+ for (i = 0; i < channum; i++) {
+ data->irqchip_data[i].chanidx = i;
+
+ data->irqchip_data[i].irq = irq_of_parse_and_map(np, i);
+ if (data->irqchip_data[i].irq <= 0) {
+ ret = -EINVAL;
+ dev_err(&pdev->dev, "failed to get irq\n");
+ goto out;
+ }
+
+ domain = irq_domain_add_linear(np, 32, &imx_intmux_domain_ops,
+ &data->irqchip_data[i]);
+ if (!domain) {
+ ret = -ENOMEM;
+ dev_err(&pdev->dev, "failed to create IRQ domain\n");
+ goto out;
+ }
+ data->irqchip_data[i].domain = domain;
+
+ /* disable all interrupt sources of this channel firstly */
+ writel_relaxed(0, data->regs + CHANIER(i));
+
+ irq_set_chained_handler_and_data(data->irqchip_data[i].irq,
+ imx_intmux_irq_handler,
+ &data->irqchip_data[i]);
+ }
+
+ platform_set_drvdata(pdev, data);
+
+ return 0;
+out:
+ clk_disable_unprepare(data->ipg_clk);
+ return ret;
+}
+
+static int imx_intmux_remove(struct platform_device *pdev)
+{
+ struct intmux_data *data = platform_get_drvdata(pdev);
+ int i;
+
+ for (i = 0; i < data->channum; i++) {
+ /* disable all interrupt sources of this channel */
+ writel_relaxed(0, data->regs + CHANIER(i));
+
+ irq_set_chained_handler_and_data(data->irqchip_data[i].irq,
+ NULL, NULL);
+
+ irq_domain_remove(data->irqchip_data[i].domain);
+ }
+
+ clk_disable_unprepare(data->ipg_clk);
+
+ return 0;
+}
+
+static const struct of_device_id imx_intmux_id[] = {
+ { .compatible = "fsl,imx-intmux", },
+ { /* sentinel */ },
+};
+
+static struct platform_driver imx_intmux_driver = {
+ .driver = {
+ .name = "imx-intmux",
+ .of_match_table = imx_intmux_id,
+ },
+ .probe = imx_intmux_probe,
+ .remove = imx_intmux_remove,
+};
+builtin_platform_driver(imx_intmux_driver);
--
2.17.1
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH V6 2/2] drivers/irqchip: add NXP INTMUX interrupt multiplexer support
@ 2020-01-17 6:10 ` Joakim Zhang
0 siblings, 0 replies; 10+ messages in thread
From: Joakim Zhang @ 2020-01-17 6:10 UTC (permalink / raw)
To: maz, jason, tglx, robh+dt, mark.rutland, shawnguo, s.hauer, robh
Cc: devicetree, Andy Duan, linux-kernel, dl-linux-imx, kernel,
festevam, linux-arm-kernel
The Interrupt Multiplexer (INTMUX) expands the number of peripherals
that can interrupt the core:
* The INTMUX has 8 channels that are assigned to 8 NVIC interrupt slots.
* Each INTMUX channel can receive up to 32 interrupt sources and has 1
interrupt output.
* The INTMUX routes the interrupt sources to the interrupt outputs.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
---
drivers/irqchip/Kconfig | 6 +
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-imx-intmux.c | 309 +++++++++++++++++++++++++++++++
3 files changed, 316 insertions(+)
create mode 100644 drivers/irqchip/irq-imx-intmux.c
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index ba152954324b..7e2b1e9d0b45 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -457,6 +457,12 @@ config IMX_IRQSTEER
help
Support for the i.MX IRQSTEER interrupt multiplexer/remapper.
+config IMX_INTMUX
+ def_bool y if ARCH_MXC
+ select IRQ_DOMAIN
+ help
+ Support for the i.MX INTMUX interrupt multiplexer.
+
config LS1X_IRQ
bool "Loongson-1 Interrupt Controller"
depends on MACH_LOONGSON32
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index e806dda690ea..af976a79d1fb 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -100,6 +100,7 @@ obj-$(CONFIG_CSKY_MPINTC) += irq-csky-mpintc.o
obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o
obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o
obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o
+obj-$(CONFIG_IMX_INTMUX) += irq-imx-intmux.o
obj-$(CONFIG_MADERA_IRQ) += irq-madera.o
obj-$(CONFIG_LS1X_IRQ) += irq-ls1x.o
obj-$(CONFIG_TI_SCI_INTR_IRQCHIP) += irq-ti-sci-intr.o
diff --git a/drivers/irqchip/irq-imx-intmux.c b/drivers/irqchip/irq-imx-intmux.c
new file mode 100644
index 000000000000..c27577c81126
--- /dev/null
+++ b/drivers/irqchip/irq-imx-intmux.c
@@ -0,0 +1,309 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright 2017 NXP
+
+/* INTMUX Block Diagram
+ *
+ * ________________
+ * interrupt source # 0 +---->| |
+ * | | |
+ * interrupt source # 1 +++-->| |
+ * ... | | | channel # 0 |--------->interrupt out # 0
+ * ... | | | |
+ * ... | | | |
+ * interrupt source # X-1 +++-->|________________|
+ * | | |
+ * | | |
+ * | | | ________________
+ * +---->| |
+ * | | | | |
+ * | +-->| |
+ * | | | | channel # 1 |--------->interrupt out # 1
+ * | | +>| |
+ * | | | | |
+ * | | | |________________|
+ * | | |
+ * | | |
+ * | | | ...
+ * | | | ...
+ * | | |
+ * | | | ________________
+ * +---->| |
+ * | | | |
+ * +-->| |
+ * | | channel # N |--------->interrupt out # N
+ * +>| |
+ * | |
+ * |________________|
+ *
+ *
+ * N: Interrupt Channel Instance Number (N=7)
+ * X: Interrupt Source Number for each channel (X=32)
+ *
+ * The INTMUX interrupt multiplexer has 8 channels, each channel receives 32
+ * interrupt sources and generates 1 interrupt output.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/kernel.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/spinlock.h>
+
+#define CHANIER(n) (0x10 + (0x40 * n))
+#define CHANIPR(n) (0x20 + (0x40 * n))
+
+#define CHAN_MAX_NUM 0x8
+
+struct intmux_irqchip_data {
+ int chanidx;
+ int irq;
+ struct irq_domain *domain;
+};
+
+struct intmux_data {
+ raw_spinlock_t lock;
+ void __iomem *regs;
+ struct clk *ipg_clk;
+ int channum;
+ struct intmux_irqchip_data irqchip_data[];
+};
+
+static void imx_intmux_irq_mask(struct irq_data *d)
+{
+ struct intmux_irqchip_data *irqchip_data = d->chip_data;
+ int idx = irqchip_data->chanidx;
+ struct intmux_data *data = container_of(irqchip_data, struct intmux_data,
+ irqchip_data[idx]);
+ unsigned long flags;
+ void __iomem *reg;
+ u32 val;
+
+ raw_spin_lock_irqsave(&data->lock, flags);
+ reg = data->regs + CHANIER(idx);
+ val = readl_relaxed(reg);
+ /* disable the interrupt source of this channel */
+ val &= ~BIT(d->hwirq);
+ writel_relaxed(val, reg);
+ raw_spin_unlock_irqrestore(&data->lock, flags);
+}
+
+static void imx_intmux_irq_unmask(struct irq_data *d)
+{
+ struct intmux_irqchip_data *irqchip_data = d->chip_data;
+ int idx = irqchip_data->chanidx;
+ struct intmux_data *data = container_of(irqchip_data, struct intmux_data,
+ irqchip_data[idx]);
+ unsigned long flags;
+ void __iomem *reg;
+ u32 val;
+
+ raw_spin_lock_irqsave(&data->lock, flags);
+ reg = data->regs + CHANIER(idx);
+ val = readl_relaxed(reg);
+ /* enable the interrupt source of this channel */
+ val |= BIT(d->hwirq);
+ writel_relaxed(val, reg);
+ raw_spin_unlock_irqrestore(&data->lock, flags);
+}
+
+static struct irq_chip imx_intmux_irq_chip = {
+ .name = "intmux",
+ .irq_mask = imx_intmux_irq_mask,
+ .irq_unmask = imx_intmux_irq_unmask,
+};
+
+static int imx_intmux_irq_map(struct irq_domain *h, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ irq_set_chip_data(irq, h->host_data);
+ irq_set_chip_and_handler(irq, &imx_intmux_irq_chip, handle_level_irq);
+
+ return 0;
+}
+
+static int imx_intmux_irq_xlate(struct irq_domain *d, struct device_node *node,
+ const u32 *intspec, unsigned int intsize,
+ unsigned long *out_hwirq, unsigned int *out_type)
+{
+ struct intmux_irqchip_data *irqchip_data = d->host_data;
+ int idx = irqchip_data->chanidx;
+ struct intmux_data *data = container_of(irqchip_data, struct intmux_data,
+ irqchip_data[idx]);
+
+ /*
+ * two cells needed in interrupt specifier:
+ * the 1st cell: hw interrupt number
+ * the 2nd cell: channel index
+ */
+ if (WARN_ON(intsize != 2))
+ return -EINVAL;
+
+ if (WARN_ON(intspec[1] >= data->channum))
+ return -EINVAL;
+
+ *out_hwirq = intspec[0];
+ *out_type = IRQ_TYPE_LEVEL_HIGH;
+
+ return 0;
+}
+
+static int imx_intmux_irq_select(struct irq_domain *d, struct irq_fwspec *fwspec,
+ enum irq_domain_bus_token bus_token)
+{
+ struct intmux_irqchip_data *irqchip_data = d->host_data;
+
+ /* Not for us */
+ if (fwspec->fwnode != d->fwnode)
+ return false;
+
+ return irqchip_data->chanidx == fwspec->param[1];
+}
+
+static const struct irq_domain_ops imx_intmux_domain_ops = {
+ .map = imx_intmux_irq_map,
+ .xlate = imx_intmux_irq_xlate,
+ .select = imx_intmux_irq_select,
+};
+
+static void imx_intmux_irq_handler(struct irq_desc *desc)
+{
+ struct intmux_irqchip_data *irqchip_data = irq_desc_get_handler_data(desc);
+ int idx = irqchip_data->chanidx;
+ struct intmux_data *data = container_of(irqchip_data, struct intmux_data,
+ irqchip_data[idx]);
+ unsigned long irqstat;
+ int pos, virq;
+
+ chained_irq_enter(irq_desc_get_chip(desc), desc);
+
+ /* read the interrupt source pending status of this channel */
+ irqstat = readl_relaxed(data->regs + CHANIPR(idx));
+
+ for_each_set_bit(pos, &irqstat, 32) {
+ virq = irq_find_mapping(irqchip_data->domain, pos);
+ if (virq)
+ generic_handle_irq(virq);
+ }
+
+ chained_irq_exit(irq_desc_get_chip(desc), desc);
+}
+
+static int imx_intmux_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct irq_domain *domain;
+ struct intmux_data *data;
+ int channum;
+ int i, ret;
+
+ channum = platform_irq_count(pdev);
+ if (channum == -EPROBE_DEFER) {
+ return -EPROBE_DEFER;
+ } else if (channum > CHAN_MAX_NUM) {
+ dev_err(&pdev->dev, "supports up to %d multiplex channels\n",
+ CHAN_MAX_NUM);
+ return -EINVAL;
+ }
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data) +
+ channum * sizeof(data->irqchip_data[0]), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(data->regs)) {
+ dev_err(&pdev->dev, "failed to initialize reg\n");
+ return PTR_ERR(data->regs);
+ }
+
+ data->ipg_clk = devm_clk_get(&pdev->dev, "ipg");
+ if (IS_ERR(data->ipg_clk)) {
+ ret = PTR_ERR(data->ipg_clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "failed to get ipg clk: %d\n", ret);
+ return ret;
+ }
+
+ data->channum = channum;
+ raw_spin_lock_init(&data->lock);
+
+ ret = clk_prepare_enable(data->ipg_clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable ipg clk: %d\n", ret);
+ return ret;
+ }
+
+ for (i = 0; i < channum; i++) {
+ data->irqchip_data[i].chanidx = i;
+
+ data->irqchip_data[i].irq = irq_of_parse_and_map(np, i);
+ if (data->irqchip_data[i].irq <= 0) {
+ ret = -EINVAL;
+ dev_err(&pdev->dev, "failed to get irq\n");
+ goto out;
+ }
+
+ domain = irq_domain_add_linear(np, 32, &imx_intmux_domain_ops,
+ &data->irqchip_data[i]);
+ if (!domain) {
+ ret = -ENOMEM;
+ dev_err(&pdev->dev, "failed to create IRQ domain\n");
+ goto out;
+ }
+ data->irqchip_data[i].domain = domain;
+
+ /* disable all interrupt sources of this channel firstly */
+ writel_relaxed(0, data->regs + CHANIER(i));
+
+ irq_set_chained_handler_and_data(data->irqchip_data[i].irq,
+ imx_intmux_irq_handler,
+ &data->irqchip_data[i]);
+ }
+
+ platform_set_drvdata(pdev, data);
+
+ return 0;
+out:
+ clk_disable_unprepare(data->ipg_clk);
+ return ret;
+}
+
+static int imx_intmux_remove(struct platform_device *pdev)
+{
+ struct intmux_data *data = platform_get_drvdata(pdev);
+ int i;
+
+ for (i = 0; i < data->channum; i++) {
+ /* disable all interrupt sources of this channel */
+ writel_relaxed(0, data->regs + CHANIER(i));
+
+ irq_set_chained_handler_and_data(data->irqchip_data[i].irq,
+ NULL, NULL);
+
+ irq_domain_remove(data->irqchip_data[i].domain);
+ }
+
+ clk_disable_unprepare(data->ipg_clk);
+
+ return 0;
+}
+
+static const struct of_device_id imx_intmux_id[] = {
+ { .compatible = "fsl,imx-intmux", },
+ { /* sentinel */ },
+};
+
+static struct platform_driver imx_intmux_driver = {
+ .driver = {
+ .name = "imx-intmux",
+ .of_match_table = imx_intmux_id,
+ },
+ .probe = imx_intmux_probe,
+ .remove = imx_intmux_remove,
+};
+builtin_platform_driver(imx_intmux_driver);
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH V6 1/2] dt-bindings/irq: add binding for NXP INTMUX interrupt multiplexer
2020-01-17 6:10 ` Joakim Zhang
@ 2020-01-17 16:37 ` Rob Herring
-1 siblings, 0 replies; 10+ messages in thread
From: Rob Herring @ 2020-01-17 16:37 UTC (permalink / raw)
To: Joakim Zhang
Cc: maz, jason, tglx, robh+dt, mark.rutland, shawnguo, s.hauer, robh,
kernel, festevam, linux-kernel, devicetree, linux-arm-kernel,
dl-linux-imx, Andy Duan
On Fri, 17 Jan 2020 06:10:05 +0000, Joakim Zhang wrote:
>
> This patch adds the DT bindings for the NXP INTMUX interrupt multiplexer
> for i.MX8 family SoCs.
>
> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
> ---
> .../interrupt-controller/fsl,intmux.yaml | 68 +++++++++++++++++++
> 1 file changed, 68 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH V6 1/2] dt-bindings/irq: add binding for NXP INTMUX interrupt multiplexer
@ 2020-01-17 16:37 ` Rob Herring
0 siblings, 0 replies; 10+ messages in thread
From: Rob Herring @ 2020-01-17 16:37 UTC (permalink / raw)
To: Joakim Zhang
Cc: mark.rutland, robh, festevam, Andy Duan, jason, devicetree, maz,
s.hauer, linux-kernel, robh+dt, dl-linux-imx, kernel, tglx,
shawnguo, linux-arm-kernel
On Fri, 17 Jan 2020 06:10:05 +0000, Joakim Zhang wrote:
>
> This patch adds the DT bindings for the NXP INTMUX interrupt multiplexer
> for i.MX8 family SoCs.
>
> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
> ---
> .../interrupt-controller/fsl,intmux.yaml | 68 +++++++++++++++++++
> 1 file changed, 68 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml
>
Reviewed-by: Rob Herring <robh@kernel.org>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 10+ messages in thread
* [tip: irq/core] dt-bindings: interrupt-controller: Add binding for NXP INTMUX interrupt multiplexer
2020-01-17 6:10 ` Joakim Zhang
(?)
(?)
@ 2020-01-24 19:11 ` tip-bot2 for Joakim Zhang
-1 siblings, 0 replies; 10+ messages in thread
From: tip-bot2 for Joakim Zhang @ 2020-01-24 19:11 UTC (permalink / raw)
To: linux-tip-commits; +Cc: Joakim Zhang, Marc Zyngier, Rob Herring, x86, LKML
The following commit has been merged into the irq/core branch of tip:
Commit-ID: 618ea6275b9806909ef384c6d57f40641d7985d2
Gitweb: https://git.kernel.org/tip/618ea6275b9806909ef384c6d57f40641d7985d2
Author: Joakim Zhang <qiangqing.zhang@nxp.com>
AuthorDate: Fri, 17 Jan 2020 06:10:05
Committer: Marc Zyngier <maz@kernel.org>
CommitterDate: Mon, 20 Jan 2020 19:10:05
dt-bindings: interrupt-controller: Add binding for NXP INTMUX interrupt multiplexer
This patch adds the DT bindings for the NXP INTMUX interrupt multiplexer
for i.MX8 family SoCs.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200117060653.27485-2-qiangqing.zhang@nxp.com
---
Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml | 68 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 68 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml
new file mode 100644
index 0000000..43c6eff
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,intmux.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,intmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale INTMUX interrupt multiplexer
+
+maintainers:
+ - Joakim Zhang <qiangqing.zhang@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx-intmux
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ maxItems: 8
+ description: |
+ Should contain the parent interrupt lines (up to 8) used to multiplex
+ the input interrupts.
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+ description: |
+ The 1st cell is hw interrupt number, the 2nd cell is channel index.
+
+ clocks:
+ description: ipg clock.
+
+ clock-names:
+ const: ipg
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ interrupt-controller@37400000 {
+ compatible = "fsl,imx-intmux";
+ reg = <0x37400000 0x1000>;
+ interrupts = <0 16 4>,
+ <0 17 4>,
+ <0 18 4>,
+ <0 19 4>,
+ <0 20 4>,
+ <0 21 4>,
+ <0 22 4>,
+ <0 23 4>;
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ #interrupt-cells = <2>;
+ clocks = <&clk>;
+ clock-names = "ipg";
+ };
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [tip: irq/core] irqchip: Add NXP INTMUX interrupt multiplexer support
2020-01-17 6:10 ` Joakim Zhang
(?)
@ 2020-01-24 19:11 ` tip-bot2 for Joakim Zhang
-1 siblings, 0 replies; 10+ messages in thread
From: tip-bot2 for Joakim Zhang @ 2020-01-24 19:11 UTC (permalink / raw)
To: linux-tip-commits; +Cc: Shengjiu Wang, Joakim Zhang, Marc Zyngier, x86, LKML
The following commit has been merged into the irq/core branch of tip:
Commit-ID: 2fbb13961e741494992bae7bfaf7259b65769f9f
Gitweb: https://git.kernel.org/tip/2fbb13961e741494992bae7bfaf7259b65769f9f
Author: Joakim Zhang <qiangqing.zhang@nxp.com>
AuthorDate: Fri, 17 Jan 2020 06:10:10
Committer: Marc Zyngier <maz@kernel.org>
CommitterDate: Mon, 20 Jan 2020 19:10:05
irqchip: Add NXP INTMUX interrupt multiplexer support
The Interrupt Multiplexer (INTMUX) expands the number of peripherals
that can interrupt the core:
* The INTMUX has 8 channels that are assigned to 8 NVIC interrupt slots.
* Each INTMUX channel can receive up to 32 interrupt sources and has 1
interrupt output.
* The INTMUX routes the interrupt sources to the interrupt outputs.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200117060653.27485-3-qiangqing.zhang@nxp.com
---
drivers/irqchip/Kconfig | 6 +-
drivers/irqchip/Makefile | 1 +-
drivers/irqchip/irq-imx-intmux.c | 309 ++++++++++++++++++++++++++++++-
3 files changed, 316 insertions(+)
create mode 100644 drivers/irqchip/irq-imx-intmux.c
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 20c62d7..1006c69 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -457,6 +457,12 @@ config IMX_IRQSTEER
help
Support for the i.MX IRQSTEER interrupt multiplexer/remapper.
+config IMX_INTMUX
+ def_bool y if ARCH_MXC
+ select IRQ_DOMAIN
+ help
+ Support for the i.MX INTMUX interrupt multiplexer.
+
config LS1X_IRQ
bool "Loongson-1 Interrupt Controller"
depends on MACH_LOONGSON32
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 4b1c511..eae0d78 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -100,6 +100,7 @@ obj-$(CONFIG_CSKY_MPINTC) += irq-csky-mpintc.o
obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o
obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o
obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o
+obj-$(CONFIG_IMX_INTMUX) += irq-imx-intmux.o
obj-$(CONFIG_MADERA_IRQ) += irq-madera.o
obj-$(CONFIG_LS1X_IRQ) += irq-ls1x.o
obj-$(CONFIG_TI_SCI_INTR_IRQCHIP) += irq-ti-sci-intr.o
diff --git a/drivers/irqchip/irq-imx-intmux.c b/drivers/irqchip/irq-imx-intmux.c
new file mode 100644
index 0000000..c27577c
--- /dev/null
+++ b/drivers/irqchip/irq-imx-intmux.c
@@ -0,0 +1,309 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright 2017 NXP
+
+/* INTMUX Block Diagram
+ *
+ * ________________
+ * interrupt source # 0 +---->| |
+ * | | |
+ * interrupt source # 1 +++-->| |
+ * ... | | | channel # 0 |--------->interrupt out # 0
+ * ... | | | |
+ * ... | | | |
+ * interrupt source # X-1 +++-->|________________|
+ * | | |
+ * | | |
+ * | | | ________________
+ * +---->| |
+ * | | | | |
+ * | +-->| |
+ * | | | | channel # 1 |--------->interrupt out # 1
+ * | | +>| |
+ * | | | | |
+ * | | | |________________|
+ * | | |
+ * | | |
+ * | | | ...
+ * | | | ...
+ * | | |
+ * | | | ________________
+ * +---->| |
+ * | | | |
+ * +-->| |
+ * | | channel # N |--------->interrupt out # N
+ * +>| |
+ * | |
+ * |________________|
+ *
+ *
+ * N: Interrupt Channel Instance Number (N=7)
+ * X: Interrupt Source Number for each channel (X=32)
+ *
+ * The INTMUX interrupt multiplexer has 8 channels, each channel receives 32
+ * interrupt sources and generates 1 interrupt output.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/kernel.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/spinlock.h>
+
+#define CHANIER(n) (0x10 + (0x40 * n))
+#define CHANIPR(n) (0x20 + (0x40 * n))
+
+#define CHAN_MAX_NUM 0x8
+
+struct intmux_irqchip_data {
+ int chanidx;
+ int irq;
+ struct irq_domain *domain;
+};
+
+struct intmux_data {
+ raw_spinlock_t lock;
+ void __iomem *regs;
+ struct clk *ipg_clk;
+ int channum;
+ struct intmux_irqchip_data irqchip_data[];
+};
+
+static void imx_intmux_irq_mask(struct irq_data *d)
+{
+ struct intmux_irqchip_data *irqchip_data = d->chip_data;
+ int idx = irqchip_data->chanidx;
+ struct intmux_data *data = container_of(irqchip_data, struct intmux_data,
+ irqchip_data[idx]);
+ unsigned long flags;
+ void __iomem *reg;
+ u32 val;
+
+ raw_spin_lock_irqsave(&data->lock, flags);
+ reg = data->regs + CHANIER(idx);
+ val = readl_relaxed(reg);
+ /* disable the interrupt source of this channel */
+ val &= ~BIT(d->hwirq);
+ writel_relaxed(val, reg);
+ raw_spin_unlock_irqrestore(&data->lock, flags);
+}
+
+static void imx_intmux_irq_unmask(struct irq_data *d)
+{
+ struct intmux_irqchip_data *irqchip_data = d->chip_data;
+ int idx = irqchip_data->chanidx;
+ struct intmux_data *data = container_of(irqchip_data, struct intmux_data,
+ irqchip_data[idx]);
+ unsigned long flags;
+ void __iomem *reg;
+ u32 val;
+
+ raw_spin_lock_irqsave(&data->lock, flags);
+ reg = data->regs + CHANIER(idx);
+ val = readl_relaxed(reg);
+ /* enable the interrupt source of this channel */
+ val |= BIT(d->hwirq);
+ writel_relaxed(val, reg);
+ raw_spin_unlock_irqrestore(&data->lock, flags);
+}
+
+static struct irq_chip imx_intmux_irq_chip = {
+ .name = "intmux",
+ .irq_mask = imx_intmux_irq_mask,
+ .irq_unmask = imx_intmux_irq_unmask,
+};
+
+static int imx_intmux_irq_map(struct irq_domain *h, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ irq_set_chip_data(irq, h->host_data);
+ irq_set_chip_and_handler(irq, &imx_intmux_irq_chip, handle_level_irq);
+
+ return 0;
+}
+
+static int imx_intmux_irq_xlate(struct irq_domain *d, struct device_node *node,
+ const u32 *intspec, unsigned int intsize,
+ unsigned long *out_hwirq, unsigned int *out_type)
+{
+ struct intmux_irqchip_data *irqchip_data = d->host_data;
+ int idx = irqchip_data->chanidx;
+ struct intmux_data *data = container_of(irqchip_data, struct intmux_data,
+ irqchip_data[idx]);
+
+ /*
+ * two cells needed in interrupt specifier:
+ * the 1st cell: hw interrupt number
+ * the 2nd cell: channel index
+ */
+ if (WARN_ON(intsize != 2))
+ return -EINVAL;
+
+ if (WARN_ON(intspec[1] >= data->channum))
+ return -EINVAL;
+
+ *out_hwirq = intspec[0];
+ *out_type = IRQ_TYPE_LEVEL_HIGH;
+
+ return 0;
+}
+
+static int imx_intmux_irq_select(struct irq_domain *d, struct irq_fwspec *fwspec,
+ enum irq_domain_bus_token bus_token)
+{
+ struct intmux_irqchip_data *irqchip_data = d->host_data;
+
+ /* Not for us */
+ if (fwspec->fwnode != d->fwnode)
+ return false;
+
+ return irqchip_data->chanidx == fwspec->param[1];
+}
+
+static const struct irq_domain_ops imx_intmux_domain_ops = {
+ .map = imx_intmux_irq_map,
+ .xlate = imx_intmux_irq_xlate,
+ .select = imx_intmux_irq_select,
+};
+
+static void imx_intmux_irq_handler(struct irq_desc *desc)
+{
+ struct intmux_irqchip_data *irqchip_data = irq_desc_get_handler_data(desc);
+ int idx = irqchip_data->chanidx;
+ struct intmux_data *data = container_of(irqchip_data, struct intmux_data,
+ irqchip_data[idx]);
+ unsigned long irqstat;
+ int pos, virq;
+
+ chained_irq_enter(irq_desc_get_chip(desc), desc);
+
+ /* read the interrupt source pending status of this channel */
+ irqstat = readl_relaxed(data->regs + CHANIPR(idx));
+
+ for_each_set_bit(pos, &irqstat, 32) {
+ virq = irq_find_mapping(irqchip_data->domain, pos);
+ if (virq)
+ generic_handle_irq(virq);
+ }
+
+ chained_irq_exit(irq_desc_get_chip(desc), desc);
+}
+
+static int imx_intmux_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct irq_domain *domain;
+ struct intmux_data *data;
+ int channum;
+ int i, ret;
+
+ channum = platform_irq_count(pdev);
+ if (channum == -EPROBE_DEFER) {
+ return -EPROBE_DEFER;
+ } else if (channum > CHAN_MAX_NUM) {
+ dev_err(&pdev->dev, "supports up to %d multiplex channels\n",
+ CHAN_MAX_NUM);
+ return -EINVAL;
+ }
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data) +
+ channum * sizeof(data->irqchip_data[0]), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(data->regs)) {
+ dev_err(&pdev->dev, "failed to initialize reg\n");
+ return PTR_ERR(data->regs);
+ }
+
+ data->ipg_clk = devm_clk_get(&pdev->dev, "ipg");
+ if (IS_ERR(data->ipg_clk)) {
+ ret = PTR_ERR(data->ipg_clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "failed to get ipg clk: %d\n", ret);
+ return ret;
+ }
+
+ data->channum = channum;
+ raw_spin_lock_init(&data->lock);
+
+ ret = clk_prepare_enable(data->ipg_clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable ipg clk: %d\n", ret);
+ return ret;
+ }
+
+ for (i = 0; i < channum; i++) {
+ data->irqchip_data[i].chanidx = i;
+
+ data->irqchip_data[i].irq = irq_of_parse_and_map(np, i);
+ if (data->irqchip_data[i].irq <= 0) {
+ ret = -EINVAL;
+ dev_err(&pdev->dev, "failed to get irq\n");
+ goto out;
+ }
+
+ domain = irq_domain_add_linear(np, 32, &imx_intmux_domain_ops,
+ &data->irqchip_data[i]);
+ if (!domain) {
+ ret = -ENOMEM;
+ dev_err(&pdev->dev, "failed to create IRQ domain\n");
+ goto out;
+ }
+ data->irqchip_data[i].domain = domain;
+
+ /* disable all interrupt sources of this channel firstly */
+ writel_relaxed(0, data->regs + CHANIER(i));
+
+ irq_set_chained_handler_and_data(data->irqchip_data[i].irq,
+ imx_intmux_irq_handler,
+ &data->irqchip_data[i]);
+ }
+
+ platform_set_drvdata(pdev, data);
+
+ return 0;
+out:
+ clk_disable_unprepare(data->ipg_clk);
+ return ret;
+}
+
+static int imx_intmux_remove(struct platform_device *pdev)
+{
+ struct intmux_data *data = platform_get_drvdata(pdev);
+ int i;
+
+ for (i = 0; i < data->channum; i++) {
+ /* disable all interrupt sources of this channel */
+ writel_relaxed(0, data->regs + CHANIER(i));
+
+ irq_set_chained_handler_and_data(data->irqchip_data[i].irq,
+ NULL, NULL);
+
+ irq_domain_remove(data->irqchip_data[i].domain);
+ }
+
+ clk_disable_unprepare(data->ipg_clk);
+
+ return 0;
+}
+
+static const struct of_device_id imx_intmux_id[] = {
+ { .compatible = "fsl,imx-intmux", },
+ { /* sentinel */ },
+};
+
+static struct platform_driver imx_intmux_driver = {
+ .driver = {
+ .name = "imx-intmux",
+ .of_match_table = imx_intmux_id,
+ },
+ .probe = imx_intmux_probe,
+ .remove = imx_intmux_remove,
+};
+builtin_platform_driver(imx_intmux_driver);
^ permalink raw reply related [flat|nested] 10+ messages in thread
end of thread, other threads:[~2020-01-24 19:12 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-17 6:10 [PATCH V6 0/2] irqchip: add NXP INTMUX interrupt controller Joakim Zhang
2020-01-17 6:10 ` Joakim Zhang
2020-01-17 6:10 ` [PATCH V6 1/2] dt-bindings/irq: add binding for NXP INTMUX interrupt multiplexer Joakim Zhang
2020-01-17 6:10 ` Joakim Zhang
2020-01-17 16:37 ` Rob Herring
2020-01-17 16:37 ` Rob Herring
2020-01-24 19:11 ` [tip: irq/core] dt-bindings: interrupt-controller: Add " tip-bot2 for Joakim Zhang
2020-01-17 6:10 ` [PATCH V6 2/2] drivers/irqchip: add NXP INTMUX interrupt multiplexer support Joakim Zhang
2020-01-17 6:10 ` Joakim Zhang
2020-01-24 19:11 ` [tip: irq/core] irqchip: Add " tip-bot2 for Joakim Zhang
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.