* [PATCH v9 0/5] add driver for "boe, tv101wum-nl6", "boe, tv101wum-n53", "auo, kd101n80-45na" and "auo, b101uan08.3" panels @ 2020-01-16 2:15 ` Jitao Shi 0 siblings, 0 replies; 27+ messages in thread From: Jitao Shi @ 2020-01-16 2:15 UTC (permalink / raw) To: Thierry Reding, Sam Ravnborg, David Airlie, Daniel Vetter, Matthias Brugger, dri-devel, linux-kernel Cc: linux-mediatek, srv_heupstream, yingjoe.chen, eddie.huang, cawa.cheng, bibby.hsieh, ck.hu, stonea168, Jitao Shi Changes since v8: - merge the panel documents to one. - delay move the drm_panel_of_backlight after drm_panel_init Changes since v7: - base drm-misc-next branch - fix document pass dt_binding_check - remove backlight from panel driver Changes since v6: - fix boe_panel_init err uninit. - adjust the delay of backlight on. Changes since v5: - covert the documents to yaml - fine tune boe, tv101wum-n53 panel video timine Changes since v4: - add auo,b101uan08.3 panel for this driver. - add boe,tv101wum-n53 panel for this driver. Changes since v3: - remove check enable_gpio. - fine tune the auo,kd101n80-45na panel's power on timing. Changes since v2: - correct the panel size - remove blank line in Kconfig - move auo,kd101n80-45na panel driver in this series. Changes since v1: - update typo nl6 -> n16. - update new panel config and makefile are added in alphabetically order. - add the panel mode and panel info in driver data. - merge auo,kd101n80-45a and boe,tv101wum-nl6 in one driver Jitao Shi (5): dt-bindings: display: panel: Add boe tv101wum-n16 panel bindings drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel drm/panel: support for auo,kd101n80-45na wuxga dsi video mode panel drm/panel: support for boe,tv101wum-n53 wuxga dsi video mode panel drm/panel: support for auo,b101uan08.3 wuxga dsi video mode panel .../display/panel/boe,tv101wum-nl6.yaml | 81 ++ drivers/gpu/drm/panel/Kconfig | 9 + drivers/gpu/drm/panel/Makefile | 1 + .../gpu/drm/panel/panel-boe-tv101wum-nl6.c | 854 ++++++++++++++++++ 4 files changed, 945 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml create mode 100644 drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c -- 2.21.0 ^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v9 0/5] add driver for "boe, tv101wum-nl6", "boe, tv101wum-n53", "auo, kd101n80-45na" and "auo, b101uan08.3" panels @ 2020-01-16 2:15 ` Jitao Shi 0 siblings, 0 replies; 27+ messages in thread From: Jitao Shi @ 2020-01-16 2:15 UTC (permalink / raw) To: Thierry Reding, Sam Ravnborg, David Airlie, Daniel Vetter, Matthias Brugger, dri-devel, linux-kernel Cc: Jitao Shi, srv_heupstream, stonea168, cawa.cheng, linux-mediatek, yingjoe.chen, eddie.huang Changes since v8: - merge the panel documents to one. - delay move the drm_panel_of_backlight after drm_panel_init Changes since v7: - base drm-misc-next branch - fix document pass dt_binding_check - remove backlight from panel driver Changes since v6: - fix boe_panel_init err uninit. - adjust the delay of backlight on. Changes since v5: - covert the documents to yaml - fine tune boe, tv101wum-n53 panel video timine Changes since v4: - add auo,b101uan08.3 panel for this driver. - add boe,tv101wum-n53 panel for this driver. Changes since v3: - remove check enable_gpio. - fine tune the auo,kd101n80-45na panel's power on timing. Changes since v2: - correct the panel size - remove blank line in Kconfig - move auo,kd101n80-45na panel driver in this series. Changes since v1: - update typo nl6 -> n16. - update new panel config and makefile are added in alphabetically order. - add the panel mode and panel info in driver data. - merge auo,kd101n80-45a and boe,tv101wum-nl6 in one driver Jitao Shi (5): dt-bindings: display: panel: Add boe tv101wum-n16 panel bindings drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel drm/panel: support for auo,kd101n80-45na wuxga dsi video mode panel drm/panel: support for boe,tv101wum-n53 wuxga dsi video mode panel drm/panel: support for auo,b101uan08.3 wuxga dsi video mode panel .../display/panel/boe,tv101wum-nl6.yaml | 81 ++ drivers/gpu/drm/panel/Kconfig | 9 + drivers/gpu/drm/panel/Makefile | 1 + .../gpu/drm/panel/panel-boe-tv101wum-nl6.c | 854 ++++++++++++++++++ 4 files changed, 945 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml create mode 100644 drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c -- 2.21.0 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v9 0/5] add driver for "boe, tv101wum-nl6", "boe, tv101wum-n53", "auo, kd101n80-45na" and "auo, b101uan08.3" panels @ 2020-01-16 2:15 ` Jitao Shi 0 siblings, 0 replies; 27+ messages in thread From: Jitao Shi @ 2020-01-16 2:15 UTC (permalink / raw) To: Thierry Reding, Sam Ravnborg, David Airlie, Daniel Vetter, Matthias Brugger, dri-devel, linux-kernel Cc: Jitao Shi, srv_heupstream, stonea168, cawa.cheng, linux-mediatek, bibby.hsieh, ck.hu, yingjoe.chen, eddie.huang Changes since v8: - merge the panel documents to one. - delay move the drm_panel_of_backlight after drm_panel_init Changes since v7: - base drm-misc-next branch - fix document pass dt_binding_check - remove backlight from panel driver Changes since v6: - fix boe_panel_init err uninit. - adjust the delay of backlight on. Changes since v5: - covert the documents to yaml - fine tune boe, tv101wum-n53 panel video timine Changes since v4: - add auo,b101uan08.3 panel for this driver. - add boe,tv101wum-n53 panel for this driver. Changes since v3: - remove check enable_gpio. - fine tune the auo,kd101n80-45na panel's power on timing. Changes since v2: - correct the panel size - remove blank line in Kconfig - move auo,kd101n80-45na panel driver in this series. Changes since v1: - update typo nl6 -> n16. - update new panel config and makefile are added in alphabetically order. - add the panel mode and panel info in driver data. - merge auo,kd101n80-45a and boe,tv101wum-nl6 in one driver Jitao Shi (5): dt-bindings: display: panel: Add boe tv101wum-n16 panel bindings drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel drm/panel: support for auo,kd101n80-45na wuxga dsi video mode panel drm/panel: support for boe,tv101wum-n53 wuxga dsi video mode panel drm/panel: support for auo,b101uan08.3 wuxga dsi video mode panel .../display/panel/boe,tv101wum-nl6.yaml | 81 ++ drivers/gpu/drm/panel/Kconfig | 9 + drivers/gpu/drm/panel/Makefile | 1 + .../gpu/drm/panel/panel-boe-tv101wum-nl6.c | 854 ++++++++++++++++++ 4 files changed, 945 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml create mode 100644 drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c -- 2.21.0 _______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek ^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v9 1/5] dt-bindings: display: panel: Add boe tv101wum-n16 panel bindings 2020-01-16 2:15 ` Jitao Shi (?) @ 2020-01-16 2:15 ` Jitao Shi -1 siblings, 0 replies; 27+ messages in thread From: Jitao Shi @ 2020-01-16 2:15 UTC (permalink / raw) To: Thierry Reding, Sam Ravnborg, David Airlie, Daniel Vetter, Matthias Brugger, dri-devel, linux-kernel Cc: linux-mediatek, srv_heupstream, yingjoe.chen, eddie.huang, cawa.cheng, bibby.hsieh, ck.hu, stonea168, Jitao Shi Add documentation for "boe,tv101wum-n16", "auo,kd101n80-45na", "boe,tv101wum-n53" and "auo,b101uan08.3" panels. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> --- .../display/panel/boe,tv101wum-nl6.yaml | 81 +++++++++++++++++++ 1 file changed, 81 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml new file mode 100644 index 000000000000..cc4e058f5eee --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/boe,tv101wum-nl6.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: BOE TV101WUM-NL6 DSI Display Panel + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Sam Ravnborg <sam@ravnborg.org> + - Rob Herring <robh+dt@kernel.org> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + enum: + # BOE TV101WUM-NL6 10.1" WUXGA TFT LCD panel + - boe,tv101wum-nl6 + # AUO KD101N80-45NA 10.1" WUXGA TFT LCD panel + - auo,kd101n80-45na + # BOE TV101WUM-N53 10.1" WUXGA TFT LCD panel + - boe,tv101wum-n53 + # AUO B101UAN08.3 10.1" WUXGA TFT LCD panel + - auo,b101uan08.3 + + reg: + description: the virtual channel number of a DSI peripheral + + enable-gpios: + description: a GPIO spec for the enable pin + + pp1800-supply: + description: core voltage supply + + avdd-supply: + description: phandle of the regulator that provides positive voltage + + avee-supply: + description: phandle of the regulator that provides negative voltage + + backlight: + description: phandle of the backlight device attached to the panel + + port: true + +required: + - compatible + - reg + - enable-gpios + - pp1800-supply + - avdd-supply + - avee-supply + +additionalProperties: false + +examples: + - | + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "boe,tv101wum-nl6"; + reg = <0>; + enable-gpios = <&pio 45 0>; + avdd-supply = <&ppvarn_lcd>; + avee-supply = <&ppvarp_lcd>; + pp1800-supply = <&pp1800_lcd>; + backlight = <&backlight_lcd0>; + status = "okay"; + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; + }; + +... -- 2.21.0 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v9 1/5] dt-bindings: display: panel: Add boe tv101wum-n16 panel bindings @ 2020-01-16 2:15 ` Jitao Shi 0 siblings, 0 replies; 27+ messages in thread From: Jitao Shi @ 2020-01-16 2:15 UTC (permalink / raw) To: Thierry Reding, Sam Ravnborg, David Airlie, Daniel Vetter, Matthias Brugger, dri-devel, linux-kernel Cc: Jitao Shi, srv_heupstream, stonea168, cawa.cheng, linux-mediatek, yingjoe.chen, eddie.huang Add documentation for "boe,tv101wum-n16", "auo,kd101n80-45na", "boe,tv101wum-n53" and "auo,b101uan08.3" panels. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> --- .../display/panel/boe,tv101wum-nl6.yaml | 81 +++++++++++++++++++ 1 file changed, 81 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml new file mode 100644 index 000000000000..cc4e058f5eee --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/boe,tv101wum-nl6.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: BOE TV101WUM-NL6 DSI Display Panel + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Sam Ravnborg <sam@ravnborg.org> + - Rob Herring <robh+dt@kernel.org> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + enum: + # BOE TV101WUM-NL6 10.1" WUXGA TFT LCD panel + - boe,tv101wum-nl6 + # AUO KD101N80-45NA 10.1" WUXGA TFT LCD panel + - auo,kd101n80-45na + # BOE TV101WUM-N53 10.1" WUXGA TFT LCD panel + - boe,tv101wum-n53 + # AUO B101UAN08.3 10.1" WUXGA TFT LCD panel + - auo,b101uan08.3 + + reg: + description: the virtual channel number of a DSI peripheral + + enable-gpios: + description: a GPIO spec for the enable pin + + pp1800-supply: + description: core voltage supply + + avdd-supply: + description: phandle of the regulator that provides positive voltage + + avee-supply: + description: phandle of the regulator that provides negative voltage + + backlight: + description: phandle of the backlight device attached to the panel + + port: true + +required: + - compatible + - reg + - enable-gpios + - pp1800-supply + - avdd-supply + - avee-supply + +additionalProperties: false + +examples: + - | + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "boe,tv101wum-nl6"; + reg = <0>; + enable-gpios = <&pio 45 0>; + avdd-supply = <&ppvarn_lcd>; + avee-supply = <&ppvarp_lcd>; + pp1800-supply = <&pp1800_lcd>; + backlight = <&backlight_lcd0>; + status = "okay"; + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; + }; + +... -- 2.21.0 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v9 1/5] dt-bindings: display: panel: Add boe tv101wum-n16 panel bindings @ 2020-01-16 2:15 ` Jitao Shi 0 siblings, 0 replies; 27+ messages in thread From: Jitao Shi @ 2020-01-16 2:15 UTC (permalink / raw) To: Thierry Reding, Sam Ravnborg, David Airlie, Daniel Vetter, Matthias Brugger, dri-devel, linux-kernel Cc: Jitao Shi, srv_heupstream, stonea168, cawa.cheng, linux-mediatek, bibby.hsieh, ck.hu, yingjoe.chen, eddie.huang Add documentation for "boe,tv101wum-n16", "auo,kd101n80-45na", "boe,tv101wum-n53" and "auo,b101uan08.3" panels. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> --- .../display/panel/boe,tv101wum-nl6.yaml | 81 +++++++++++++++++++ 1 file changed, 81 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml new file mode 100644 index 000000000000..cc4e058f5eee --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/boe,tv101wum-nl6.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: BOE TV101WUM-NL6 DSI Display Panel + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Sam Ravnborg <sam@ravnborg.org> + - Rob Herring <robh+dt@kernel.org> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + enum: + # BOE TV101WUM-NL6 10.1" WUXGA TFT LCD panel + - boe,tv101wum-nl6 + # AUO KD101N80-45NA 10.1" WUXGA TFT LCD panel + - auo,kd101n80-45na + # BOE TV101WUM-N53 10.1" WUXGA TFT LCD panel + - boe,tv101wum-n53 + # AUO B101UAN08.3 10.1" WUXGA TFT LCD panel + - auo,b101uan08.3 + + reg: + description: the virtual channel number of a DSI peripheral + + enable-gpios: + description: a GPIO spec for the enable pin + + pp1800-supply: + description: core voltage supply + + avdd-supply: + description: phandle of the regulator that provides positive voltage + + avee-supply: + description: phandle of the regulator that provides negative voltage + + backlight: + description: phandle of the backlight device attached to the panel + + port: true + +required: + - compatible + - reg + - enable-gpios + - pp1800-supply + - avdd-supply + - avee-supply + +additionalProperties: false + +examples: + - | + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "boe,tv101wum-nl6"; + reg = <0>; + enable-gpios = <&pio 45 0>; + avdd-supply = <&ppvarn_lcd>; + avee-supply = <&ppvarp_lcd>; + pp1800-supply = <&pp1800_lcd>; + backlight = <&backlight_lcd0>; + status = "okay"; + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; + }; + +... -- 2.21.0 _______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek ^ permalink raw reply related [flat|nested] 27+ messages in thread
* Re: [PATCH v9 1/5] dt-bindings: display: panel: Add boe tv101wum-n16 panel bindings 2020-01-16 2:15 ` Jitao Shi (?) @ 2020-01-17 18:08 ` Sam Ravnborg -1 siblings, 0 replies; 27+ messages in thread From: Sam Ravnborg @ 2020-01-17 18:08 UTC (permalink / raw) To: Jitao Shi Cc: Thierry Reding, David Airlie, Daniel Vetter, Matthias Brugger, dri-devel, linux-kernel, srv_heupstream, stonea168, cawa.cheng, linux-mediatek, yingjoe.chen, eddie.huang Hi Jitao. Looks good, much better than the individual files. Rob Herring is still listed as maintainer which I questioned in last feedback. With this resolved (kept only if Rob confirms), this is Reviewed-by: Sam Ravnborg <sam@ravnborg.org> On Thu, Jan 16, 2020 at 10:15:07AM +0800, Jitao Shi wrote: > Add documentation for "boe,tv101wum-n16", "auo,kd101n80-45na", > "boe,tv101wum-n53" and "auo,b101uan08.3" panels. > > Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> > Reviewed-by: Sam Ravnborg <sam@ravnborg.org> > --- > .../display/panel/boe,tv101wum-nl6.yaml | 81 +++++++++++++++++++ > 1 file changed, 81 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml > > diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml > new file mode 100644 > index 000000000000..cc4e058f5eee > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml > @@ -0,0 +1,81 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/panel/boe,tv101wum-nl6.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: BOE TV101WUM-NL6 DSI Display Panel > + > +maintainers: > + - Thierry Reding <thierry.reding@gmail.com> > + - Sam Ravnborg <sam@ravnborg.org> > + - Rob Herring <robh+dt@kernel.org> > + > +allOf: > + - $ref: panel-common.yaml# > + > +properties: > + compatible: > + enum: > + # BOE TV101WUM-NL6 10.1" WUXGA TFT LCD panel > + - boe,tv101wum-nl6 > + # AUO KD101N80-45NA 10.1" WUXGA TFT LCD panel > + - auo,kd101n80-45na > + # BOE TV101WUM-N53 10.1" WUXGA TFT LCD panel > + - boe,tv101wum-n53 > + # AUO B101UAN08.3 10.1" WUXGA TFT LCD panel > + - auo,b101uan08.3 > + > + reg: > + description: the virtual channel number of a DSI peripheral > + > + enable-gpios: > + description: a GPIO spec for the enable pin > + > + pp1800-supply: > + description: core voltage supply > + > + avdd-supply: > + description: phandle of the regulator that provides positive voltage > + > + avee-supply: > + description: phandle of the regulator that provides negative voltage > + > + backlight: > + description: phandle of the backlight device attached to the panel > + > + port: true > + > +required: > + - compatible > + - reg > + - enable-gpios > + - pp1800-supply > + - avdd-supply > + - avee-supply > + > +additionalProperties: false > + > +examples: > + - | > + dsi { > + #address-cells = <1>; > + #size-cells = <0>; > + panel@0 { > + compatible = "boe,tv101wum-nl6"; > + reg = <0>; > + enable-gpios = <&pio 45 0>; > + avdd-supply = <&ppvarn_lcd>; > + avee-supply = <&ppvarp_lcd>; > + pp1800-supply = <&pp1800_lcd>; > + backlight = <&backlight_lcd0>; > + status = "okay"; > + port { > + panel_in: endpoint { > + remote-endpoint = <&dsi_out>; > + }; > + }; > + }; > + }; > + > +... > -- > 2.21.0 > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v9 1/5] dt-bindings: display: panel: Add boe tv101wum-n16 panel bindings @ 2020-01-17 18:08 ` Sam Ravnborg 0 siblings, 0 replies; 27+ messages in thread From: Sam Ravnborg @ 2020-01-17 18:08 UTC (permalink / raw) To: Jitao Shi Cc: srv_heupstream, David Airlie, stonea168, linux-kernel, dri-devel, cawa.cheng, Thierry Reding, linux-mediatek, Matthias Brugger, yingjoe.chen, eddie.huang Hi Jitao. Looks good, much better than the individual files. Rob Herring is still listed as maintainer which I questioned in last feedback. With this resolved (kept only if Rob confirms), this is Reviewed-by: Sam Ravnborg <sam@ravnborg.org> On Thu, Jan 16, 2020 at 10:15:07AM +0800, Jitao Shi wrote: > Add documentation for "boe,tv101wum-n16", "auo,kd101n80-45na", > "boe,tv101wum-n53" and "auo,b101uan08.3" panels. > > Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> > Reviewed-by: Sam Ravnborg <sam@ravnborg.org> > --- > .../display/panel/boe,tv101wum-nl6.yaml | 81 +++++++++++++++++++ > 1 file changed, 81 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml > > diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml > new file mode 100644 > index 000000000000..cc4e058f5eee > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml > @@ -0,0 +1,81 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/panel/boe,tv101wum-nl6.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: BOE TV101WUM-NL6 DSI Display Panel > + > +maintainers: > + - Thierry Reding <thierry.reding@gmail.com> > + - Sam Ravnborg <sam@ravnborg.org> > + - Rob Herring <robh+dt@kernel.org> > + > +allOf: > + - $ref: panel-common.yaml# > + > +properties: > + compatible: > + enum: > + # BOE TV101WUM-NL6 10.1" WUXGA TFT LCD panel > + - boe,tv101wum-nl6 > + # AUO KD101N80-45NA 10.1" WUXGA TFT LCD panel > + - auo,kd101n80-45na > + # BOE TV101WUM-N53 10.1" WUXGA TFT LCD panel > + - boe,tv101wum-n53 > + # AUO B101UAN08.3 10.1" WUXGA TFT LCD panel > + - auo,b101uan08.3 > + > + reg: > + description: the virtual channel number of a DSI peripheral > + > + enable-gpios: > + description: a GPIO spec for the enable pin > + > + pp1800-supply: > + description: core voltage supply > + > + avdd-supply: > + description: phandle of the regulator that provides positive voltage > + > + avee-supply: > + description: phandle of the regulator that provides negative voltage > + > + backlight: > + description: phandle of the backlight device attached to the panel > + > + port: true > + > +required: > + - compatible > + - reg > + - enable-gpios > + - pp1800-supply > + - avdd-supply > + - avee-supply > + > +additionalProperties: false > + > +examples: > + - | > + dsi { > + #address-cells = <1>; > + #size-cells = <0>; > + panel@0 { > + compatible = "boe,tv101wum-nl6"; > + reg = <0>; > + enable-gpios = <&pio 45 0>; > + avdd-supply = <&ppvarn_lcd>; > + avee-supply = <&ppvarp_lcd>; > + pp1800-supply = <&pp1800_lcd>; > + backlight = <&backlight_lcd0>; > + status = "okay"; > + port { > + panel_in: endpoint { > + remote-endpoint = <&dsi_out>; > + }; > + }; > + }; > + }; > + > +... > -- > 2.21.0 > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v9 1/5] dt-bindings: display: panel: Add boe tv101wum-n16 panel bindings @ 2020-01-17 18:08 ` Sam Ravnborg 0 siblings, 0 replies; 27+ messages in thread From: Sam Ravnborg @ 2020-01-17 18:08 UTC (permalink / raw) To: Jitao Shi Cc: srv_heupstream, David Airlie, stonea168, linux-kernel, dri-devel, cawa.cheng, Thierry Reding, linux-mediatek, Daniel Vetter, Matthias Brugger, yingjoe.chen, eddie.huang Hi Jitao. Looks good, much better than the individual files. Rob Herring is still listed as maintainer which I questioned in last feedback. With this resolved (kept only if Rob confirms), this is Reviewed-by: Sam Ravnborg <sam@ravnborg.org> On Thu, Jan 16, 2020 at 10:15:07AM +0800, Jitao Shi wrote: > Add documentation for "boe,tv101wum-n16", "auo,kd101n80-45na", > "boe,tv101wum-n53" and "auo,b101uan08.3" panels. > > Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> > Reviewed-by: Sam Ravnborg <sam@ravnborg.org> > --- > .../display/panel/boe,tv101wum-nl6.yaml | 81 +++++++++++++++++++ > 1 file changed, 81 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml > > diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml > new file mode 100644 > index 000000000000..cc4e058f5eee > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml > @@ -0,0 +1,81 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/panel/boe,tv101wum-nl6.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: BOE TV101WUM-NL6 DSI Display Panel > + > +maintainers: > + - Thierry Reding <thierry.reding@gmail.com> > + - Sam Ravnborg <sam@ravnborg.org> > + - Rob Herring <robh+dt@kernel.org> > + > +allOf: > + - $ref: panel-common.yaml# > + > +properties: > + compatible: > + enum: > + # BOE TV101WUM-NL6 10.1" WUXGA TFT LCD panel > + - boe,tv101wum-nl6 > + # AUO KD101N80-45NA 10.1" WUXGA TFT LCD panel > + - auo,kd101n80-45na > + # BOE TV101WUM-N53 10.1" WUXGA TFT LCD panel > + - boe,tv101wum-n53 > + # AUO B101UAN08.3 10.1" WUXGA TFT LCD panel > + - auo,b101uan08.3 > + > + reg: > + description: the virtual channel number of a DSI peripheral > + > + enable-gpios: > + description: a GPIO spec for the enable pin > + > + pp1800-supply: > + description: core voltage supply > + > + avdd-supply: > + description: phandle of the regulator that provides positive voltage > + > + avee-supply: > + description: phandle of the regulator that provides negative voltage > + > + backlight: > + description: phandle of the backlight device attached to the panel > + > + port: true > + > +required: > + - compatible > + - reg > + - enable-gpios > + - pp1800-supply > + - avdd-supply > + - avee-supply > + > +additionalProperties: false > + > +examples: > + - | > + dsi { > + #address-cells = <1>; > + #size-cells = <0>; > + panel@0 { > + compatible = "boe,tv101wum-nl6"; > + reg = <0>; > + enable-gpios = <&pio 45 0>; > + avdd-supply = <&ppvarn_lcd>; > + avee-supply = <&ppvarp_lcd>; > + pp1800-supply = <&pp1800_lcd>; > + backlight = <&backlight_lcd0>; > + status = "okay"; > + port { > + panel_in: endpoint { > + remote-endpoint = <&dsi_out>; > + }; > + }; > + }; > + }; > + > +... > -- > 2.21.0 > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel _______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v9 1/5] dt-bindings: display: panel: Add boe tv101wum-n16 panel bindings 2020-01-17 18:08 ` Sam Ravnborg (?) @ 2020-01-17 18:30 ` Sam Ravnborg -1 siblings, 0 replies; 27+ messages in thread From: Sam Ravnborg @ 2020-01-17 18:30 UTC (permalink / raw) To: Jitao Shi Cc: srv_heupstream, David Airlie, stonea168, linux-kernel, dri-devel, cawa.cheng, Thierry Reding, linux-mediatek, Matthias Brugger, yingjoe.chen, eddie.huang Hi Jitao. On Fri, Jan 17, 2020 at 07:08:17PM +0100, Sam Ravnborg wrote: > Hi Jitao. > > Looks good, much better than the individual files. > Rob Herring is still listed as maintainer which I questioned in last > feedback. > > With this resolved (kept only if Rob confirms), this is > Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Rob confirmed on irc that he is not a dedicated reviewer of this binding. And furhtermore that it was OK I committed trivial panel bindings. Dropepd Rob and applied to drm-misc-next. Sam > > On Thu, Jan 16, 2020 at 10:15:07AM +0800, Jitao Shi wrote: > > Add documentation for "boe,tv101wum-n16", "auo,kd101n80-45na", > > "boe,tv101wum-n53" and "auo,b101uan08.3" panels. > > > > Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> > > Reviewed-by: Sam Ravnborg <sam@ravnborg.org> > > --- > > .../display/panel/boe,tv101wum-nl6.yaml | 81 +++++++++++++++++++ > > 1 file changed, 81 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml > > > > diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml > > new file mode 100644 > > index 000000000000..cc4e058f5eee > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml > > @@ -0,0 +1,81 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/display/panel/boe,tv101wum-nl6.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: BOE TV101WUM-NL6 DSI Display Panel > > + > > +maintainers: > > + - Thierry Reding <thierry.reding@gmail.com> > > + - Sam Ravnborg <sam@ravnborg.org> > > + - Rob Herring <robh+dt@kernel.org> > > + > > +allOf: > > + - $ref: panel-common.yaml# > > + > > +properties: > > + compatible: > > + enum: > > + # BOE TV101WUM-NL6 10.1" WUXGA TFT LCD panel > > + - boe,tv101wum-nl6 > > + # AUO KD101N80-45NA 10.1" WUXGA TFT LCD panel > > + - auo,kd101n80-45na > > + # BOE TV101WUM-N53 10.1" WUXGA TFT LCD panel > > + - boe,tv101wum-n53 > > + # AUO B101UAN08.3 10.1" WUXGA TFT LCD panel > > + - auo,b101uan08.3 > > + > > + reg: > > + description: the virtual channel number of a DSI peripheral > > + > > + enable-gpios: > > + description: a GPIO spec for the enable pin > > + > > + pp1800-supply: > > + description: core voltage supply > > + > > + avdd-supply: > > + description: phandle of the regulator that provides positive voltage > > + > > + avee-supply: > > + description: phandle of the regulator that provides negative voltage > > + > > + backlight: > > + description: phandle of the backlight device attached to the panel > > + > > + port: true > > + > > +required: > > + - compatible > > + - reg > > + - enable-gpios > > + - pp1800-supply > > + - avdd-supply > > + - avee-supply > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + dsi { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + panel@0 { > > + compatible = "boe,tv101wum-nl6"; > > + reg = <0>; > > + enable-gpios = <&pio 45 0>; > > + avdd-supply = <&ppvarn_lcd>; > > + avee-supply = <&ppvarp_lcd>; > > + pp1800-supply = <&pp1800_lcd>; > > + backlight = <&backlight_lcd0>; > > + status = "okay"; > > + port { > > + panel_in: endpoint { > > + remote-endpoint = <&dsi_out>; > > + }; > > + }; > > + }; > > + }; > > + > > +... > > -- > > 2.21.0 > > _______________________________________________ > > dri-devel mailing list > > dri-devel@lists.freedesktop.org > > https://lists.freedesktop.org/mailman/listinfo/dri-devel > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v9 1/5] dt-bindings: display: panel: Add boe tv101wum-n16 panel bindings @ 2020-01-17 18:30 ` Sam Ravnborg 0 siblings, 0 replies; 27+ messages in thread From: Sam Ravnborg @ 2020-01-17 18:30 UTC (permalink / raw) To: Jitao Shi Cc: srv_heupstream, David Airlie, stonea168, linux-kernel, dri-devel, cawa.cheng, Thierry Reding, linux-mediatek, Matthias Brugger, yingjoe.chen, eddie.huang Hi Jitao. On Fri, Jan 17, 2020 at 07:08:17PM +0100, Sam Ravnborg wrote: > Hi Jitao. > > Looks good, much better than the individual files. > Rob Herring is still listed as maintainer which I questioned in last > feedback. > > With this resolved (kept only if Rob confirms), this is > Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Rob confirmed on irc that he is not a dedicated reviewer of this binding. And furhtermore that it was OK I committed trivial panel bindings. Dropepd Rob and applied to drm-misc-next. Sam > > On Thu, Jan 16, 2020 at 10:15:07AM +0800, Jitao Shi wrote: > > Add documentation for "boe,tv101wum-n16", "auo,kd101n80-45na", > > "boe,tv101wum-n53" and "auo,b101uan08.3" panels. > > > > Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> > > Reviewed-by: Sam Ravnborg <sam@ravnborg.org> > > --- > > .../display/panel/boe,tv101wum-nl6.yaml | 81 +++++++++++++++++++ > > 1 file changed, 81 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml > > > > diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml > > new file mode 100644 > > index 000000000000..cc4e058f5eee > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml > > @@ -0,0 +1,81 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/display/panel/boe,tv101wum-nl6.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: BOE TV101WUM-NL6 DSI Display Panel > > + > > +maintainers: > > + - Thierry Reding <thierry.reding@gmail.com> > > + - Sam Ravnborg <sam@ravnborg.org> > > + - Rob Herring <robh+dt@kernel.org> > > + > > +allOf: > > + - $ref: panel-common.yaml# > > + > > +properties: > > + compatible: > > + enum: > > + # BOE TV101WUM-NL6 10.1" WUXGA TFT LCD panel > > + - boe,tv101wum-nl6 > > + # AUO KD101N80-45NA 10.1" WUXGA TFT LCD panel > > + - auo,kd101n80-45na > > + # BOE TV101WUM-N53 10.1" WUXGA TFT LCD panel > > + - boe,tv101wum-n53 > > + # AUO B101UAN08.3 10.1" WUXGA TFT LCD panel > > + - auo,b101uan08.3 > > + > > + reg: > > + description: the virtual channel number of a DSI peripheral > > + > > + enable-gpios: > > + description: a GPIO spec for the enable pin > > + > > + pp1800-supply: > > + description: core voltage supply > > + > > + avdd-supply: > > + description: phandle of the regulator that provides positive voltage > > + > > + avee-supply: > > + description: phandle of the regulator that provides negative voltage > > + > > + backlight: > > + description: phandle of the backlight device attached to the panel > > + > > + port: true > > + > > +required: > > + - compatible > > + - reg > > + - enable-gpios > > + - pp1800-supply > > + - avdd-supply > > + - avee-supply > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + dsi { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + panel@0 { > > + compatible = "boe,tv101wum-nl6"; > > + reg = <0>; > > + enable-gpios = <&pio 45 0>; > > + avdd-supply = <&ppvarn_lcd>; > > + avee-supply = <&ppvarp_lcd>; > > + pp1800-supply = <&pp1800_lcd>; > > + backlight = <&backlight_lcd0>; > > + status = "okay"; > > + port { > > + panel_in: endpoint { > > + remote-endpoint = <&dsi_out>; > > + }; > > + }; > > + }; > > + }; > > + > > +... > > -- > > 2.21.0 > > _______________________________________________ > > dri-devel mailing list > > dri-devel@lists.freedesktop.org > > https://lists.freedesktop.org/mailman/listinfo/dri-devel > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v9 1/5] dt-bindings: display: panel: Add boe tv101wum-n16 panel bindings @ 2020-01-17 18:30 ` Sam Ravnborg 0 siblings, 0 replies; 27+ messages in thread From: Sam Ravnborg @ 2020-01-17 18:30 UTC (permalink / raw) To: Jitao Shi Cc: srv_heupstream, David Airlie, stonea168, linux-kernel, dri-devel, cawa.cheng, Thierry Reding, linux-mediatek, Matthias Brugger, yingjoe.chen, eddie.huang Hi Jitao. On Fri, Jan 17, 2020 at 07:08:17PM +0100, Sam Ravnborg wrote: > Hi Jitao. > > Looks good, much better than the individual files. > Rob Herring is still listed as maintainer which I questioned in last > feedback. > > With this resolved (kept only if Rob confirms), this is > Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Rob confirmed on irc that he is not a dedicated reviewer of this binding. And furhtermore that it was OK I committed trivial panel bindings. Dropepd Rob and applied to drm-misc-next. Sam > > On Thu, Jan 16, 2020 at 10:15:07AM +0800, Jitao Shi wrote: > > Add documentation for "boe,tv101wum-n16", "auo,kd101n80-45na", > > "boe,tv101wum-n53" and "auo,b101uan08.3" panels. > > > > Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> > > Reviewed-by: Sam Ravnborg <sam@ravnborg.org> > > --- > > .../display/panel/boe,tv101wum-nl6.yaml | 81 +++++++++++++++++++ > > 1 file changed, 81 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml > > > > diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml > > new file mode 100644 > > index 000000000000..cc4e058f5eee > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml > > @@ -0,0 +1,81 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/display/panel/boe,tv101wum-nl6.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: BOE TV101WUM-NL6 DSI Display Panel > > + > > +maintainers: > > + - Thierry Reding <thierry.reding@gmail.com> > > + - Sam Ravnborg <sam@ravnborg.org> > > + - Rob Herring <robh+dt@kernel.org> > > + > > +allOf: > > + - $ref: panel-common.yaml# > > + > > +properties: > > + compatible: > > + enum: > > + # BOE TV101WUM-NL6 10.1" WUXGA TFT LCD panel > > + - boe,tv101wum-nl6 > > + # AUO KD101N80-45NA 10.1" WUXGA TFT LCD panel > > + - auo,kd101n80-45na > > + # BOE TV101WUM-N53 10.1" WUXGA TFT LCD panel > > + - boe,tv101wum-n53 > > + # AUO B101UAN08.3 10.1" WUXGA TFT LCD panel > > + - auo,b101uan08.3 > > + > > + reg: > > + description: the virtual channel number of a DSI peripheral > > + > > + enable-gpios: > > + description: a GPIO spec for the enable pin > > + > > + pp1800-supply: > > + description: core voltage supply > > + > > + avdd-supply: > > + description: phandle of the regulator that provides positive voltage > > + > > + avee-supply: > > + description: phandle of the regulator that provides negative voltage > > + > > + backlight: > > + description: phandle of the backlight device attached to the panel > > + > > + port: true > > + > > +required: > > + - compatible > > + - reg > > + - enable-gpios > > + - pp1800-supply > > + - avdd-supply > > + - avee-supply > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + dsi { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + panel@0 { > > + compatible = "boe,tv101wum-nl6"; > > + reg = <0>; > > + enable-gpios = <&pio 45 0>; > > + avdd-supply = <&ppvarn_lcd>; > > + avee-supply = <&ppvarp_lcd>; > > + pp1800-supply = <&pp1800_lcd>; > > + backlight = <&backlight_lcd0>; > > + status = "okay"; > > + port { > > + panel_in: endpoint { > > + remote-endpoint = <&dsi_out>; > > + }; > > + }; > > + }; > > + }; > > + > > +... > > -- > > 2.21.0 > > _______________________________________________ > > dri-devel mailing list > > dri-devel@lists.freedesktop.org > > https://lists.freedesktop.org/mailman/listinfo/dri-devel > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel _______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek ^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH v9 2/5] drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel 2020-01-16 2:15 ` Jitao Shi (?) @ 2020-01-16 2:15 ` Jitao Shi -1 siblings, 0 replies; 27+ messages in thread From: Jitao Shi @ 2020-01-16 2:15 UTC (permalink / raw) To: Thierry Reding, Sam Ravnborg, David Airlie, Daniel Vetter, Matthias Brugger, dri-devel, linux-kernel Cc: linux-mediatek, srv_heupstream, yingjoe.chen, eddie.huang, cawa.cheng, bibby.hsieh, ck.hu, stonea168, Jitao Shi Add driver for BOE tv101wum-nl6 panel is a 10.1" 1200x1920 panel. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> --- drivers/gpu/drm/panel/Kconfig | 9 + drivers/gpu/drm/panel/Makefile | 1 + .../gpu/drm/panel/panel-boe-tv101wum-nl6.c | 693 ++++++++++++++++++ 3 files changed, 703 insertions(+) create mode 100644 drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index ae44ac2ec106..ca727c233a9a 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -29,6 +29,15 @@ config DRM_PANEL_BOE_HIMAX8279D 24 bit RGB per pixel. It provides a MIPI DSI interface to the host and has a built-in LED backlight. +config DRM_PANEL_BOE_TV101WUM_NL6 + tristate "BOE TV101WUM 1200x1920 panel" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to support for BOE TV101WUM WUXGA PANEL + DSI Video Mode panel + config DRM_PANEL_LVDS tristate "Generic LVDS panel driver" depends on OF diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile index 7c4d3c581fd4..a659ce403d0e 100644 --- a/drivers/gpu/drm/panel/Makefile +++ b/drivers/gpu/drm/panel/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_DRM_PANEL_ARM_VERSATILE) += panel-arm-versatile.o obj-$(CONFIG_DRM_PANEL_BOE_HIMAX8279D) += panel-boe-himax8279d.o +obj-$(CONFIG_DRM_PANEL_BOE_TV101WUM_NL6) += panel-boe-tv101wum-nl6.o obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o obj-$(CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D) += panel-feiyang-fy07024di26a30d.o diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c new file mode 100644 index 000000000000..51fde588adc1 --- /dev/null +++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c @@ -0,0 +1,693 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2018 MediaTek Inc. + * Author: Jitao Shi <jitao.shi@mediatek.com> + */ + +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/regulator/consumer.h> + +#include <drm/drm_crtc.h> +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_panel.h> + +#include <video/mipi_display.h> + +struct panel_desc { + const struct drm_display_mode *modes; + unsigned int bpc; + + /** + * @width_mm: width of the panel's active display area + * @height_mm: height of the panel's active display area + */ + struct { + unsigned int width_mm; + unsigned int height_mm; + } size; + + unsigned long mode_flags; + enum mipi_dsi_pixel_format format; + const struct panel_init_cmd *init_cmds; + unsigned int lanes; +}; + +struct boe_panel { + struct drm_panel base; + struct mipi_dsi_device *dsi; + + const struct panel_desc *desc; + + struct regulator *pp1800; + struct regulator *avee; + struct regulator *avdd; + struct gpio_desc *enable_gpio; + + bool prepared; +}; + +enum dsi_cmd_type { + INIT_DCS_CMD, + DELAY_CMD, +}; + +struct panel_init_cmd { + enum dsi_cmd_type type; + size_t len; + const char *data; +}; + +#define _INIT_DCS_CMD(...) { \ + .type = INIT_DCS_CMD, \ + .len = sizeof((char[]){__VA_ARGS__}), \ + .data = (char[]){__VA_ARGS__} } + +#define _INIT_DELAY_CMD(...) { \ + .type = DELAY_CMD,\ + .len = sizeof((char[]){__VA_ARGS__}), \ + .data = (char[]){__VA_ARGS__} } + +static const struct panel_init_cmd boe_init_cmd[] = { + _INIT_DELAY_CMD(24), + _INIT_DCS_CMD(0xB0, 0x05), + _INIT_DCS_CMD(0xB1, 0xE5), + _INIT_DCS_CMD(0xB3, 0x52), + _INIT_DCS_CMD(0xB0, 0x00), + _INIT_DCS_CMD(0xB3, 0x88), + _INIT_DCS_CMD(0xB0, 0x04), + _INIT_DCS_CMD(0xB8, 0x00), + _INIT_DCS_CMD(0xB0, 0x00), + _INIT_DCS_CMD(0xB6, 0x03), + _INIT_DCS_CMD(0xBA, 0x8B), + _INIT_DCS_CMD(0xBF, 0x1A), + _INIT_DCS_CMD(0xC0, 0x0F), + _INIT_DCS_CMD(0xC2, 0x0C), + _INIT_DCS_CMD(0xC3, 0x02), + _INIT_DCS_CMD(0xC4, 0x0C), + _INIT_DCS_CMD(0xC5, 0x02), + _INIT_DCS_CMD(0xB0, 0x01), + _INIT_DCS_CMD(0xE0, 0x26), + _INIT_DCS_CMD(0xE1, 0x26), + _INIT_DCS_CMD(0xDC, 0x00), + _INIT_DCS_CMD(0xDD, 0x00), + _INIT_DCS_CMD(0xCC, 0x26), + _INIT_DCS_CMD(0xCD, 0x26), + _INIT_DCS_CMD(0xC8, 0x00), + _INIT_DCS_CMD(0xC9, 0x00), + _INIT_DCS_CMD(0xD2, 0x03), + _INIT_DCS_CMD(0xD3, 0x03), + _INIT_DCS_CMD(0xE6, 0x04), + _INIT_DCS_CMD(0xE7, 0x04), + _INIT_DCS_CMD(0xC4, 0x09), + _INIT_DCS_CMD(0xC5, 0x09), + _INIT_DCS_CMD(0xD8, 0x0A), + _INIT_DCS_CMD(0xD9, 0x0A), + _INIT_DCS_CMD(0xC2, 0x0B), + _INIT_DCS_CMD(0xC3, 0x0B), + _INIT_DCS_CMD(0xD6, 0x0C), + _INIT_DCS_CMD(0xD7, 0x0C), + _INIT_DCS_CMD(0xC0, 0x05), + _INIT_DCS_CMD(0xC1, 0x05), + _INIT_DCS_CMD(0xD4, 0x06), + _INIT_DCS_CMD(0xD5, 0x06), + _INIT_DCS_CMD(0xCA, 0x07), + _INIT_DCS_CMD(0xCB, 0x07), + _INIT_DCS_CMD(0xDE, 0x08), + _INIT_DCS_CMD(0xDF, 0x08), + _INIT_DCS_CMD(0xB0, 0x02), + _INIT_DCS_CMD(0xC0, 0x00), + _INIT_DCS_CMD(0xC1, 0x0D), + _INIT_DCS_CMD(0xC2, 0x17), + _INIT_DCS_CMD(0xC3, 0x26), + _INIT_DCS_CMD(0xC4, 0x31), + _INIT_DCS_CMD(0xC5, 0x1C), + _INIT_DCS_CMD(0xC6, 0x2C), + _INIT_DCS_CMD(0xC7, 0x33), + _INIT_DCS_CMD(0xC8, 0x31), + _INIT_DCS_CMD(0xC9, 0x37), + _INIT_DCS_CMD(0xCA, 0x37), + _INIT_DCS_CMD(0xCB, 0x37), + _INIT_DCS_CMD(0xCC, 0x39), + _INIT_DCS_CMD(0xCD, 0x2E), + _INIT_DCS_CMD(0xCE, 0x2F), + _INIT_DCS_CMD(0xCF, 0x2F), + _INIT_DCS_CMD(0xD0, 0x07), + _INIT_DCS_CMD(0xD2, 0x00), + _INIT_DCS_CMD(0xD3, 0x0D), + _INIT_DCS_CMD(0xD4, 0x17), + _INIT_DCS_CMD(0xD5, 0x26), + _INIT_DCS_CMD(0xD6, 0x31), + _INIT_DCS_CMD(0xD7, 0x3F), + _INIT_DCS_CMD(0xD8, 0x3F), + _INIT_DCS_CMD(0xD9, 0x3F), + _INIT_DCS_CMD(0xDA, 0x3F), + _INIT_DCS_CMD(0xDB, 0x37), + _INIT_DCS_CMD(0xDC, 0x37), + _INIT_DCS_CMD(0xDD, 0x37), + _INIT_DCS_CMD(0xDE, 0x39), + _INIT_DCS_CMD(0xDF, 0x2E), + _INIT_DCS_CMD(0xE0, 0x2F), + _INIT_DCS_CMD(0xE1, 0x2F), + _INIT_DCS_CMD(0xE2, 0x07), + _INIT_DCS_CMD(0xB0, 0x03), + _INIT_DCS_CMD(0xC8, 0x0B), + _INIT_DCS_CMD(0xC9, 0x07), + _INIT_DCS_CMD(0xC3, 0x00), + _INIT_DCS_CMD(0xE7, 0x00), + _INIT_DCS_CMD(0xC5, 0x2A), + _INIT_DCS_CMD(0xDE, 0x2A), + _INIT_DCS_CMD(0xCA, 0x43), + _INIT_DCS_CMD(0xC9, 0x07), + _INIT_DCS_CMD(0xE4, 0xC0), + _INIT_DCS_CMD(0xE5, 0x0D), + _INIT_DCS_CMD(0xCB, 0x00), + _INIT_DCS_CMD(0xB0, 0x06), + _INIT_DCS_CMD(0xB8, 0xA5), + _INIT_DCS_CMD(0xC0, 0xA5), + _INIT_DCS_CMD(0xC7, 0x0F), + _INIT_DCS_CMD(0xD5, 0x32), + _INIT_DCS_CMD(0xB8, 0x00), + _INIT_DCS_CMD(0xC0, 0x00), + _INIT_DCS_CMD(0xBC, 0x00), + _INIT_DCS_CMD(0xB0, 0x07), + _INIT_DCS_CMD(0xB1, 0x00), + _INIT_DCS_CMD(0xB2, 0x02), + _INIT_DCS_CMD(0xB3, 0x0F), + _INIT_DCS_CMD(0xB4, 0x25), + _INIT_DCS_CMD(0xB5, 0x39), + _INIT_DCS_CMD(0xB6, 0x4E), + _INIT_DCS_CMD(0xB7, 0x72), + _INIT_DCS_CMD(0xB8, 0x97), + _INIT_DCS_CMD(0xB9, 0xDC), + _INIT_DCS_CMD(0xBA, 0x22), + _INIT_DCS_CMD(0xBB, 0xA4), + _INIT_DCS_CMD(0xBC, 0x2B), + _INIT_DCS_CMD(0xBD, 0x2F), + _INIT_DCS_CMD(0xBE, 0xA9), + _INIT_DCS_CMD(0xBF, 0x25), + _INIT_DCS_CMD(0xC0, 0x61), + _INIT_DCS_CMD(0xC1, 0x97), + _INIT_DCS_CMD(0xC2, 0xB2), + _INIT_DCS_CMD(0xC3, 0xCD), + _INIT_DCS_CMD(0xC4, 0xD9), + _INIT_DCS_CMD(0xC5, 0xE7), + _INIT_DCS_CMD(0xC6, 0xF4), + _INIT_DCS_CMD(0xC7, 0xFA), + _INIT_DCS_CMD(0xC8, 0xFC), + _INIT_DCS_CMD(0xC9, 0x00), + _INIT_DCS_CMD(0xCA, 0x00), + _INIT_DCS_CMD(0xCB, 0x16), + _INIT_DCS_CMD(0xCC, 0xAF), + _INIT_DCS_CMD(0xCD, 0xFF), + _INIT_DCS_CMD(0xCE, 0xFF), + _INIT_DCS_CMD(0xB0, 0x08), + _INIT_DCS_CMD(0xB1, 0x04), + _INIT_DCS_CMD(0xB2, 0x05), + _INIT_DCS_CMD(0xB3, 0x11), + _INIT_DCS_CMD(0xB4, 0x24), + _INIT_DCS_CMD(0xB5, 0x39), + _INIT_DCS_CMD(0xB6, 0x4F), + _INIT_DCS_CMD(0xB7, 0x72), + _INIT_DCS_CMD(0xB8, 0x98), + _INIT_DCS_CMD(0xB9, 0xDC), + _INIT_DCS_CMD(0xBA, 0x23), + _INIT_DCS_CMD(0xBB, 0xA6), + _INIT_DCS_CMD(0xBC, 0x2C), + _INIT_DCS_CMD(0xBD, 0x30), + _INIT_DCS_CMD(0xBE, 0xAA), + _INIT_DCS_CMD(0xBF, 0x26), + _INIT_DCS_CMD(0xC0, 0x62), + _INIT_DCS_CMD(0xC1, 0x9B), + _INIT_DCS_CMD(0xC2, 0xB5), + _INIT_DCS_CMD(0xC3, 0xCF), + _INIT_DCS_CMD(0xC4, 0xDB), + _INIT_DCS_CMD(0xC5, 0xE8), + _INIT_DCS_CMD(0xC6, 0xF5), + _INIT_DCS_CMD(0xC7, 0xFA), + _INIT_DCS_CMD(0xC8, 0xFC), + _INIT_DCS_CMD(0xC9, 0x00), + _INIT_DCS_CMD(0xCA, 0x00), + _INIT_DCS_CMD(0xCB, 0x16), + _INIT_DCS_CMD(0xCC, 0xAF), + _INIT_DCS_CMD(0xCD, 0xFF), + _INIT_DCS_CMD(0xCE, 0xFF), + _INIT_DCS_CMD(0xB0, 0x09), + _INIT_DCS_CMD(0xB1, 0x04), + _INIT_DCS_CMD(0xB2, 0x02), + _INIT_DCS_CMD(0xB3, 0x16), + _INIT_DCS_CMD(0xB4, 0x24), + _INIT_DCS_CMD(0xB5, 0x3B), + _INIT_DCS_CMD(0xB6, 0x4F), + _INIT_DCS_CMD(0xB7, 0x73), + _INIT_DCS_CMD(0xB8, 0x99), + _INIT_DCS_CMD(0xB9, 0xE0), + _INIT_DCS_CMD(0xBA, 0x26), + _INIT_DCS_CMD(0xBB, 0xAD), + _INIT_DCS_CMD(0xBC, 0x36), + _INIT_DCS_CMD(0xBD, 0x3A), + _INIT_DCS_CMD(0xBE, 0xAE), + _INIT_DCS_CMD(0xBF, 0x2A), + _INIT_DCS_CMD(0xC0, 0x66), + _INIT_DCS_CMD(0xC1, 0x9E), + _INIT_DCS_CMD(0xC2, 0xB8), + _INIT_DCS_CMD(0xC3, 0xD1), + _INIT_DCS_CMD(0xC4, 0xDD), + _INIT_DCS_CMD(0xC5, 0xE9), + _INIT_DCS_CMD(0xC6, 0xF6), + _INIT_DCS_CMD(0xC7, 0xFA), + _INIT_DCS_CMD(0xC8, 0xFC), + _INIT_DCS_CMD(0xC9, 0x00), + _INIT_DCS_CMD(0xCA, 0x00), + _INIT_DCS_CMD(0xCB, 0x16), + _INIT_DCS_CMD(0xCC, 0xAF), + _INIT_DCS_CMD(0xCD, 0xFF), + _INIT_DCS_CMD(0xCE, 0xFF), + _INIT_DCS_CMD(0xB0, 0x0A), + _INIT_DCS_CMD(0xB1, 0x00), + _INIT_DCS_CMD(0xB2, 0x02), + _INIT_DCS_CMD(0xB3, 0x0F), + _INIT_DCS_CMD(0xB4, 0x25), + _INIT_DCS_CMD(0xB5, 0x39), + _INIT_DCS_CMD(0xB6, 0x4E), + _INIT_DCS_CMD(0xB7, 0x72), + _INIT_DCS_CMD(0xB8, 0x97), + _INIT_DCS_CMD(0xB9, 0xDC), + _INIT_DCS_CMD(0xBA, 0x22), + _INIT_DCS_CMD(0xBB, 0xA4), + _INIT_DCS_CMD(0xBC, 0x2B), + _INIT_DCS_CMD(0xBD, 0x2F), + _INIT_DCS_CMD(0xBE, 0xA9), + _INIT_DCS_CMD(0xBF, 0x25), + _INIT_DCS_CMD(0xC0, 0x61), + _INIT_DCS_CMD(0xC1, 0x97), + _INIT_DCS_CMD(0xC2, 0xB2), + _INIT_DCS_CMD(0xC3, 0xCD), + _INIT_DCS_CMD(0xC4, 0xD9), + _INIT_DCS_CMD(0xC5, 0xE7), + _INIT_DCS_CMD(0xC6, 0xF4), + _INIT_DCS_CMD(0xC7, 0xFA), + _INIT_DCS_CMD(0xC8, 0xFC), + _INIT_DCS_CMD(0xC9, 0x00), + _INIT_DCS_CMD(0xCA, 0x00), + _INIT_DCS_CMD(0xCB, 0x16), + _INIT_DCS_CMD(0xCC, 0xAF), + _INIT_DCS_CMD(0xCD, 0xFF), + _INIT_DCS_CMD(0xCE, 0xFF), + _INIT_DCS_CMD(0xB0, 0x0B), + _INIT_DCS_CMD(0xB1, 0x04), + _INIT_DCS_CMD(0xB2, 0x05), + _INIT_DCS_CMD(0xB3, 0x11), + _INIT_DCS_CMD(0xB4, 0x24), + _INIT_DCS_CMD(0xB5, 0x39), + _INIT_DCS_CMD(0xB6, 0x4F), + _INIT_DCS_CMD(0xB7, 0x72), + _INIT_DCS_CMD(0xB8, 0x98), + _INIT_DCS_CMD(0xB9, 0xDC), + _INIT_DCS_CMD(0xBA, 0x23), + _INIT_DCS_CMD(0xBB, 0xA6), + _INIT_DCS_CMD(0xBC, 0x2C), + _INIT_DCS_CMD(0xBD, 0x30), + _INIT_DCS_CMD(0xBE, 0xAA), + _INIT_DCS_CMD(0xBF, 0x26), + _INIT_DCS_CMD(0xC0, 0x62), + _INIT_DCS_CMD(0xC1, 0x9B), + _INIT_DCS_CMD(0xC2, 0xB5), + _INIT_DCS_CMD(0xC3, 0xCF), + _INIT_DCS_CMD(0xC4, 0xDB), + _INIT_DCS_CMD(0xC5, 0xE8), + _INIT_DCS_CMD(0xC6, 0xF5), + _INIT_DCS_CMD(0xC7, 0xFA), + _INIT_DCS_CMD(0xC8, 0xFC), + _INIT_DCS_CMD(0xC9, 0x00), + _INIT_DCS_CMD(0xCA, 0x00), + _INIT_DCS_CMD(0xCB, 0x16), + _INIT_DCS_CMD(0xCC, 0xAF), + _INIT_DCS_CMD(0xCD, 0xFF), + _INIT_DCS_CMD(0xCE, 0xFF), + _INIT_DCS_CMD(0xB0, 0x0C), + _INIT_DCS_CMD(0xB1, 0x04), + _INIT_DCS_CMD(0xB2, 0x02), + _INIT_DCS_CMD(0xB3, 0x16), + _INIT_DCS_CMD(0xB4, 0x24), + _INIT_DCS_CMD(0xB5, 0x3B), + _INIT_DCS_CMD(0xB6, 0x4F), + _INIT_DCS_CMD(0xB7, 0x73), + _INIT_DCS_CMD(0xB8, 0x99), + _INIT_DCS_CMD(0xB9, 0xE0), + _INIT_DCS_CMD(0xBA, 0x26), + _INIT_DCS_CMD(0xBB, 0xAD), + _INIT_DCS_CMD(0xBC, 0x36), + _INIT_DCS_CMD(0xBD, 0x3A), + _INIT_DCS_CMD(0xBE, 0xAE), + _INIT_DCS_CMD(0xBF, 0x2A), + _INIT_DCS_CMD(0xC0, 0x66), + _INIT_DCS_CMD(0xC1, 0x9E), + _INIT_DCS_CMD(0xC2, 0xB8), + _INIT_DCS_CMD(0xC3, 0xD1), + _INIT_DCS_CMD(0xC4, 0xDD), + _INIT_DCS_CMD(0xC5, 0xE9), + _INIT_DCS_CMD(0xC6, 0xF6), + _INIT_DCS_CMD(0xC7, 0xFA), + _INIT_DCS_CMD(0xC8, 0xFC), + _INIT_DCS_CMD(0xC9, 0x00), + _INIT_DCS_CMD(0xCA, 0x00), + _INIT_DCS_CMD(0xCB, 0x16), + _INIT_DCS_CMD(0xCC, 0xAF), + _INIT_DCS_CMD(0xCD, 0xFF), + _INIT_DCS_CMD(0xCE, 0xFF), + _INIT_DCS_CMD(0xB0, 0x00), + _INIT_DCS_CMD(0xB3, 0x08), + _INIT_DCS_CMD(0xB0, 0x04), + _INIT_DCS_CMD(0xB8, 0x68), + _INIT_DELAY_CMD(150), + {}, +}; + +static inline struct boe_panel *to_boe_panel(struct drm_panel *panel) +{ + return container_of(panel, struct boe_panel, base); +} + +static int boe_panel_init_dcs_cmd(struct boe_panel *boe) +{ + struct mipi_dsi_device *dsi = boe->dsi; + struct drm_panel *panel = &boe->base; + int i, err = 0; + + if (boe->desc->init_cmds) { + const struct panel_init_cmd *init_cmds = boe->desc->init_cmds; + + for (i = 0; init_cmds[i].len != 0; i++) { + const struct panel_init_cmd *cmd = &init_cmds[i]; + + switch (cmd->type) { + case DELAY_CMD: + msleep(cmd->data[0]); + err = 0; + break; + + case INIT_DCS_CMD: + err = mipi_dsi_dcs_write(dsi, cmd->data[0], + cmd->len <= 1 ? NULL : + &cmd->data[1], + cmd->len - 1); + break; + + default: + err = -EINVAL; + } + + if (err < 0) { + dev_err(panel->dev, + "failed to write command %u\n", i); + return err; + } + } + } + return 0; +} + +static int boe_panel_enter_sleep_mode(struct boe_panel *boe) +{ + struct mipi_dsi_device *dsi = boe->dsi; + int ret; + + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; + + ret = mipi_dsi_dcs_set_display_off(dsi); + if (ret < 0) + return ret; + + ret = mipi_dsi_dcs_enter_sleep_mode(dsi); + if (ret < 0) + return ret; + + return 0; +} + +static int boe_panel_unprepare(struct drm_panel *panel) +{ + struct boe_panel *boe = to_boe_panel(panel); + int ret; + + if (!boe->prepared) + return 0; + + ret = boe_panel_enter_sleep_mode(boe); + if (ret < 0) { + dev_err(panel->dev, "failed to set panel off: %d\n", ret); + return ret; + } + + msleep(150); + gpiod_set_value(boe->enable_gpio, 0); + usleep_range(500, 1000); + regulator_disable(boe->avee); + regulator_disable(boe->avdd); + usleep_range(5000, 7000); + regulator_disable(boe->pp1800); + + boe->prepared = false; + + return 0; +} + +static int boe_panel_prepare(struct drm_panel *panel) +{ + struct boe_panel *boe = to_boe_panel(panel); + int ret; + + if (boe->prepared) + return 0; + + gpiod_set_value(boe->enable_gpio, 0); + usleep_range(1000, 1500); + + ret = regulator_enable(boe->pp1800); + if (ret < 0) + return ret; + + usleep_range(3000, 5000); + + ret = regulator_enable(boe->avdd); + if (ret < 0) + goto poweroff1v8; + ret = regulator_enable(boe->avee); + if (ret < 0) + goto poweroffavdd; + + usleep_range(5000, 10000); + + gpiod_set_value(boe->enable_gpio, 1); + usleep_range(1000, 2000); + gpiod_set_value(boe->enable_gpio, 0); + usleep_range(1000, 2000); + gpiod_set_value(boe->enable_gpio, 1); + usleep_range(6000, 10000); + + ret = boe_panel_init_dcs_cmd(boe); + if (ret < 0) { + dev_err(panel->dev, "failed to init panel: %d\n", ret); + goto poweroff; + } + + boe->prepared = true; + + return 0; + +poweroff: + regulator_disable(boe->avee); +poweroffavdd: + regulator_disable(boe->avdd); +poweroff1v8: + usleep_range(5000, 7000); + regulator_disable(boe->pp1800); + gpiod_set_value(boe->enable_gpio, 0); + + return ret; +} + +static int boe_panel_enable(struct drm_panel *panel) +{ + msleep(130); + return 0; +} + +static const struct drm_display_mode boe_tv101wum_nl6_default_mode = { + .clock = 159425, + .hdisplay = 1200, + .hsync_start = 1200 + 100, + .hsync_end = 1200 + 100 + 40, + .htotal = 1200 + 100 + 40 + 24, + .vdisplay = 1920, + .vsync_start = 1920 + 10, + .vsync_end = 1920 + 10 + 14, + .vtotal = 1920 + 10 + 14 + 4, + .vrefresh = 60, +}; + +static const struct panel_desc boe_tv101wum_nl6_desc = { + .modes = &boe_tv101wum_nl6_default_mode, + .bpc = 8, + .size = { + .width_mm = 135, + .height_mm = 216, + }, + .lanes = 4, + .format = MIPI_DSI_FMT_RGB888, + .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE | + MIPI_DSI_MODE_LPM, + .init_cmds = boe_init_cmd, +}; + +static int boe_panel_get_modes(struct drm_panel *panel, + struct drm_connector *connector) +{ + struct boe_panel *boe = to_boe_panel(panel); + const struct drm_display_mode *m = boe->desc->modes; + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(connector->dev, m); + if (!mode) { + dev_err(panel->dev, "failed to add mode %ux%u@%u\n", + m->hdisplay, m->vdisplay, m->vrefresh); + return -ENOMEM; + } + + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + drm_mode_set_name(mode); + drm_mode_probed_add(connector, mode); + + connector->display_info.width_mm = boe->desc->size.width_mm; + connector->display_info.height_mm = boe->desc->size.height_mm; + connector->display_info.bpc = boe->desc->bpc; + + return 1; +} + +static const struct drm_panel_funcs boe_panel_funcs = { + .unprepare = boe_panel_unprepare, + .prepare = boe_panel_prepare, + .enable = boe_panel_enable, + .get_modes = boe_panel_get_modes, +}; + +static int boe_panel_add(struct boe_panel *boe) +{ + struct device *dev = &boe->dsi->dev; + int err; + + boe->avdd = devm_regulator_get(dev, "avdd"); + if (IS_ERR(boe->avdd)) + return PTR_ERR(boe->avdd); + + boe->avee = devm_regulator_get(dev, "avee"); + if (IS_ERR(boe->avee)) + return PTR_ERR(boe->avee); + + boe->pp1800 = devm_regulator_get(dev, "pp1800"); + if (IS_ERR(boe->pp1800)) + return PTR_ERR(boe->pp1800); + + boe->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW); + if (IS_ERR(boe->enable_gpio)) { + dev_err(dev, "cannot get reset-gpios %ld\n", + PTR_ERR(boe->enable_gpio)); + return PTR_ERR(boe->enable_gpio); + } + + gpiod_set_value(boe->enable_gpio, 0); + + drm_panel_init(&boe->base, dev, &boe_panel_funcs, + DRM_MODE_CONNECTOR_DSI); + + err = drm_panel_of_backlight(&boe->base); + if (err) + return err; + + boe->base.funcs = &boe_panel_funcs; + boe->base.dev = &boe->dsi->dev; + + return drm_panel_add(&boe->base); +} + +static int boe_panel_probe(struct mipi_dsi_device *dsi) +{ + struct boe_panel *boe; + int ret; + const struct panel_desc *desc; + + boe = devm_kzalloc(&dsi->dev, sizeof(*boe), GFP_KERNEL); + if (!boe) + return -ENOMEM; + + desc = of_device_get_match_data(&dsi->dev); + dsi->lanes = desc->lanes; + dsi->format = desc->format; + dsi->mode_flags = desc->mode_flags; + boe->desc = desc; + boe->dsi = dsi; + ret = boe_panel_add(boe); + if (ret < 0) + return ret; + + mipi_dsi_set_drvdata(dsi, boe); + + ret = mipi_dsi_attach(dsi); + if (ret) + drm_panel_remove(&boe->base); + + return ret; +} + +static void boe_panel_shutdown(struct mipi_dsi_device *dsi) +{ + struct boe_panel *boe = mipi_dsi_get_drvdata(dsi); + + drm_panel_disable(&boe->base); + drm_panel_unprepare(&boe->base); +} + +static int boe_panel_remove(struct mipi_dsi_device *dsi) +{ + struct boe_panel *boe = mipi_dsi_get_drvdata(dsi); + int ret; + + boe_panel_shutdown(dsi); + + ret = mipi_dsi_detach(dsi); + if (ret < 0) + dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret); + + if (boe->base.dev) + drm_panel_remove(&boe->base); + + return 0; +} + +static const struct of_device_id boe_of_match[] = { + { .compatible = "boe,tv101wum-nl6", + .data = &boe_tv101wum_nl6_desc + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, boe_of_match); + +static struct mipi_dsi_driver boe_panel_driver = { + .driver = { + .name = "panel-boe-tv101wum-nl6", + .of_match_table = boe_of_match, + }, + .probe = boe_panel_probe, + .remove = boe_panel_remove, + .shutdown = boe_panel_shutdown, +}; +module_mipi_dsi_driver(boe_panel_driver); + +MODULE_AUTHOR("Jitao Shi <jitao.shi@mediatek.com>"); +MODULE_DESCRIPTION("BOE tv101wum-nl6 1200x1920 video mode panel driver"); +MODULE_LICENSE("GPL v2"); -- 2.21.0 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v9 2/5] drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel @ 2020-01-16 2:15 ` Jitao Shi 0 siblings, 0 replies; 27+ messages in thread From: Jitao Shi @ 2020-01-16 2:15 UTC (permalink / raw) To: Thierry Reding, Sam Ravnborg, David Airlie, Daniel Vetter, Matthias Brugger, dri-devel, linux-kernel Cc: Jitao Shi, srv_heupstream, stonea168, cawa.cheng, linux-mediatek, yingjoe.chen, eddie.huang Add driver for BOE tv101wum-nl6 panel is a 10.1" 1200x1920 panel. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> --- drivers/gpu/drm/panel/Kconfig | 9 + drivers/gpu/drm/panel/Makefile | 1 + .../gpu/drm/panel/panel-boe-tv101wum-nl6.c | 693 ++++++++++++++++++ 3 files changed, 703 insertions(+) create mode 100644 drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index ae44ac2ec106..ca727c233a9a 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -29,6 +29,15 @@ config DRM_PANEL_BOE_HIMAX8279D 24 bit RGB per pixel. It provides a MIPI DSI interface to the host and has a built-in LED backlight. +config DRM_PANEL_BOE_TV101WUM_NL6 + tristate "BOE TV101WUM 1200x1920 panel" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to support for BOE TV101WUM WUXGA PANEL + DSI Video Mode panel + config DRM_PANEL_LVDS tristate "Generic LVDS panel driver" depends on OF diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile index 7c4d3c581fd4..a659ce403d0e 100644 --- a/drivers/gpu/drm/panel/Makefile +++ b/drivers/gpu/drm/panel/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_DRM_PANEL_ARM_VERSATILE) += panel-arm-versatile.o obj-$(CONFIG_DRM_PANEL_BOE_HIMAX8279D) += panel-boe-himax8279d.o +obj-$(CONFIG_DRM_PANEL_BOE_TV101WUM_NL6) += panel-boe-tv101wum-nl6.o obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o obj-$(CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D) += panel-feiyang-fy07024di26a30d.o diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c new file mode 100644 index 000000000000..51fde588adc1 --- /dev/null +++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c @@ -0,0 +1,693 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2018 MediaTek Inc. + * Author: Jitao Shi <jitao.shi@mediatek.com> + */ + +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/regulator/consumer.h> + +#include <drm/drm_crtc.h> +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_panel.h> + +#include <video/mipi_display.h> + +struct panel_desc { + const struct drm_display_mode *modes; + unsigned int bpc; + + /** + * @width_mm: width of the panel's active display area + * @height_mm: height of the panel's active display area + */ + struct { + unsigned int width_mm; + unsigned int height_mm; + } size; + + unsigned long mode_flags; + enum mipi_dsi_pixel_format format; + const struct panel_init_cmd *init_cmds; + unsigned int lanes; +}; + +struct boe_panel { + struct drm_panel base; + struct mipi_dsi_device *dsi; + + const struct panel_desc *desc; + + struct regulator *pp1800; + struct regulator *avee; + struct regulator *avdd; + struct gpio_desc *enable_gpio; + + bool prepared; +}; + +enum dsi_cmd_type { + INIT_DCS_CMD, + DELAY_CMD, +}; + +struct panel_init_cmd { + enum dsi_cmd_type type; + size_t len; + const char *data; +}; + +#define _INIT_DCS_CMD(...) { \ + .type = INIT_DCS_CMD, \ + .len = sizeof((char[]){__VA_ARGS__}), \ + .data = (char[]){__VA_ARGS__} } + +#define _INIT_DELAY_CMD(...) { \ + .type = DELAY_CMD,\ + .len = sizeof((char[]){__VA_ARGS__}), \ + .data = (char[]){__VA_ARGS__} } + +static const struct panel_init_cmd boe_init_cmd[] = { + _INIT_DELAY_CMD(24), + _INIT_DCS_CMD(0xB0, 0x05), + _INIT_DCS_CMD(0xB1, 0xE5), + _INIT_DCS_CMD(0xB3, 0x52), + _INIT_DCS_CMD(0xB0, 0x00), + _INIT_DCS_CMD(0xB3, 0x88), + _INIT_DCS_CMD(0xB0, 0x04), + _INIT_DCS_CMD(0xB8, 0x00), + _INIT_DCS_CMD(0xB0, 0x00), + _INIT_DCS_CMD(0xB6, 0x03), + _INIT_DCS_CMD(0xBA, 0x8B), + _INIT_DCS_CMD(0xBF, 0x1A), + _INIT_DCS_CMD(0xC0, 0x0F), + _INIT_DCS_CMD(0xC2, 0x0C), + _INIT_DCS_CMD(0xC3, 0x02), + _INIT_DCS_CMD(0xC4, 0x0C), + _INIT_DCS_CMD(0xC5, 0x02), + _INIT_DCS_CMD(0xB0, 0x01), + _INIT_DCS_CMD(0xE0, 0x26), + _INIT_DCS_CMD(0xE1, 0x26), + _INIT_DCS_CMD(0xDC, 0x00), + _INIT_DCS_CMD(0xDD, 0x00), + _INIT_DCS_CMD(0xCC, 0x26), + _INIT_DCS_CMD(0xCD, 0x26), + _INIT_DCS_CMD(0xC8, 0x00), + _INIT_DCS_CMD(0xC9, 0x00), + _INIT_DCS_CMD(0xD2, 0x03), + _INIT_DCS_CMD(0xD3, 0x03), + _INIT_DCS_CMD(0xE6, 0x04), + _INIT_DCS_CMD(0xE7, 0x04), + _INIT_DCS_CMD(0xC4, 0x09), + _INIT_DCS_CMD(0xC5, 0x09), + _INIT_DCS_CMD(0xD8, 0x0A), + _INIT_DCS_CMD(0xD9, 0x0A), + _INIT_DCS_CMD(0xC2, 0x0B), + _INIT_DCS_CMD(0xC3, 0x0B), + _INIT_DCS_CMD(0xD6, 0x0C), + _INIT_DCS_CMD(0xD7, 0x0C), + _INIT_DCS_CMD(0xC0, 0x05), + _INIT_DCS_CMD(0xC1, 0x05), + _INIT_DCS_CMD(0xD4, 0x06), + _INIT_DCS_CMD(0xD5, 0x06), + _INIT_DCS_CMD(0xCA, 0x07), + _INIT_DCS_CMD(0xCB, 0x07), + _INIT_DCS_CMD(0xDE, 0x08), + _INIT_DCS_CMD(0xDF, 0x08), + _INIT_DCS_CMD(0xB0, 0x02), + _INIT_DCS_CMD(0xC0, 0x00), + _INIT_DCS_CMD(0xC1, 0x0D), + _INIT_DCS_CMD(0xC2, 0x17), + _INIT_DCS_CMD(0xC3, 0x26), + _INIT_DCS_CMD(0xC4, 0x31), + _INIT_DCS_CMD(0xC5, 0x1C), + _INIT_DCS_CMD(0xC6, 0x2C), + _INIT_DCS_CMD(0xC7, 0x33), + _INIT_DCS_CMD(0xC8, 0x31), + _INIT_DCS_CMD(0xC9, 0x37), + _INIT_DCS_CMD(0xCA, 0x37), + _INIT_DCS_CMD(0xCB, 0x37), + _INIT_DCS_CMD(0xCC, 0x39), + _INIT_DCS_CMD(0xCD, 0x2E), + _INIT_DCS_CMD(0xCE, 0x2F), + _INIT_DCS_CMD(0xCF, 0x2F), + _INIT_DCS_CMD(0xD0, 0x07), + _INIT_DCS_CMD(0xD2, 0x00), + _INIT_DCS_CMD(0xD3, 0x0D), + _INIT_DCS_CMD(0xD4, 0x17), + _INIT_DCS_CMD(0xD5, 0x26), + _INIT_DCS_CMD(0xD6, 0x31), + _INIT_DCS_CMD(0xD7, 0x3F), + _INIT_DCS_CMD(0xD8, 0x3F), + _INIT_DCS_CMD(0xD9, 0x3F), + _INIT_DCS_CMD(0xDA, 0x3F), + _INIT_DCS_CMD(0xDB, 0x37), + _INIT_DCS_CMD(0xDC, 0x37), + _INIT_DCS_CMD(0xDD, 0x37), + _INIT_DCS_CMD(0xDE, 0x39), + _INIT_DCS_CMD(0xDF, 0x2E), + _INIT_DCS_CMD(0xE0, 0x2F), + _INIT_DCS_CMD(0xE1, 0x2F), + _INIT_DCS_CMD(0xE2, 0x07), + _INIT_DCS_CMD(0xB0, 0x03), + _INIT_DCS_CMD(0xC8, 0x0B), + _INIT_DCS_CMD(0xC9, 0x07), + _INIT_DCS_CMD(0xC3, 0x00), + _INIT_DCS_CMD(0xE7, 0x00), + _INIT_DCS_CMD(0xC5, 0x2A), + _INIT_DCS_CMD(0xDE, 0x2A), + _INIT_DCS_CMD(0xCA, 0x43), + _INIT_DCS_CMD(0xC9, 0x07), + _INIT_DCS_CMD(0xE4, 0xC0), + _INIT_DCS_CMD(0xE5, 0x0D), + _INIT_DCS_CMD(0xCB, 0x00), + _INIT_DCS_CMD(0xB0, 0x06), + _INIT_DCS_CMD(0xB8, 0xA5), + _INIT_DCS_CMD(0xC0, 0xA5), + _INIT_DCS_CMD(0xC7, 0x0F), + _INIT_DCS_CMD(0xD5, 0x32), + _INIT_DCS_CMD(0xB8, 0x00), + _INIT_DCS_CMD(0xC0, 0x00), + _INIT_DCS_CMD(0xBC, 0x00), + _INIT_DCS_CMD(0xB0, 0x07), + _INIT_DCS_CMD(0xB1, 0x00), + _INIT_DCS_CMD(0xB2, 0x02), + _INIT_DCS_CMD(0xB3, 0x0F), + _INIT_DCS_CMD(0xB4, 0x25), + _INIT_DCS_CMD(0xB5, 0x39), + _INIT_DCS_CMD(0xB6, 0x4E), + _INIT_DCS_CMD(0xB7, 0x72), + _INIT_DCS_CMD(0xB8, 0x97), + _INIT_DCS_CMD(0xB9, 0xDC), + _INIT_DCS_CMD(0xBA, 0x22), + _INIT_DCS_CMD(0xBB, 0xA4), + _INIT_DCS_CMD(0xBC, 0x2B), + _INIT_DCS_CMD(0xBD, 0x2F), + _INIT_DCS_CMD(0xBE, 0xA9), + _INIT_DCS_CMD(0xBF, 0x25), + _INIT_DCS_CMD(0xC0, 0x61), + _INIT_DCS_CMD(0xC1, 0x97), + _INIT_DCS_CMD(0xC2, 0xB2), + _INIT_DCS_CMD(0xC3, 0xCD), + _INIT_DCS_CMD(0xC4, 0xD9), + _INIT_DCS_CMD(0xC5, 0xE7), + _INIT_DCS_CMD(0xC6, 0xF4), + _INIT_DCS_CMD(0xC7, 0xFA), + _INIT_DCS_CMD(0xC8, 0xFC), + _INIT_DCS_CMD(0xC9, 0x00), + _INIT_DCS_CMD(0xCA, 0x00), + _INIT_DCS_CMD(0xCB, 0x16), + _INIT_DCS_CMD(0xCC, 0xAF), + _INIT_DCS_CMD(0xCD, 0xFF), + _INIT_DCS_CMD(0xCE, 0xFF), + _INIT_DCS_CMD(0xB0, 0x08), + _INIT_DCS_CMD(0xB1, 0x04), + _INIT_DCS_CMD(0xB2, 0x05), + _INIT_DCS_CMD(0xB3, 0x11), + _INIT_DCS_CMD(0xB4, 0x24), + _INIT_DCS_CMD(0xB5, 0x39), + _INIT_DCS_CMD(0xB6, 0x4F), + _INIT_DCS_CMD(0xB7, 0x72), + _INIT_DCS_CMD(0xB8, 0x98), + _INIT_DCS_CMD(0xB9, 0xDC), + _INIT_DCS_CMD(0xBA, 0x23), + _INIT_DCS_CMD(0xBB, 0xA6), + _INIT_DCS_CMD(0xBC, 0x2C), + _INIT_DCS_CMD(0xBD, 0x30), + _INIT_DCS_CMD(0xBE, 0xAA), + _INIT_DCS_CMD(0xBF, 0x26), + _INIT_DCS_CMD(0xC0, 0x62), + _INIT_DCS_CMD(0xC1, 0x9B), + _INIT_DCS_CMD(0xC2, 0xB5), + _INIT_DCS_CMD(0xC3, 0xCF), + _INIT_DCS_CMD(0xC4, 0xDB), + _INIT_DCS_CMD(0xC5, 0xE8), + _INIT_DCS_CMD(0xC6, 0xF5), + _INIT_DCS_CMD(0xC7, 0xFA), + _INIT_DCS_CMD(0xC8, 0xFC), + _INIT_DCS_CMD(0xC9, 0x00), + _INIT_DCS_CMD(0xCA, 0x00), + _INIT_DCS_CMD(0xCB, 0x16), + _INIT_DCS_CMD(0xCC, 0xAF), + _INIT_DCS_CMD(0xCD, 0xFF), + _INIT_DCS_CMD(0xCE, 0xFF), + _INIT_DCS_CMD(0xB0, 0x09), + _INIT_DCS_CMD(0xB1, 0x04), + _INIT_DCS_CMD(0xB2, 0x02), + _INIT_DCS_CMD(0xB3, 0x16), + _INIT_DCS_CMD(0xB4, 0x24), + _INIT_DCS_CMD(0xB5, 0x3B), + _INIT_DCS_CMD(0xB6, 0x4F), + _INIT_DCS_CMD(0xB7, 0x73), + _INIT_DCS_CMD(0xB8, 0x99), + _INIT_DCS_CMD(0xB9, 0xE0), + _INIT_DCS_CMD(0xBA, 0x26), + _INIT_DCS_CMD(0xBB, 0xAD), + _INIT_DCS_CMD(0xBC, 0x36), + _INIT_DCS_CMD(0xBD, 0x3A), + _INIT_DCS_CMD(0xBE, 0xAE), + _INIT_DCS_CMD(0xBF, 0x2A), + _INIT_DCS_CMD(0xC0, 0x66), + _INIT_DCS_CMD(0xC1, 0x9E), + _INIT_DCS_CMD(0xC2, 0xB8), + _INIT_DCS_CMD(0xC3, 0xD1), + _INIT_DCS_CMD(0xC4, 0xDD), + _INIT_DCS_CMD(0xC5, 0xE9), + _INIT_DCS_CMD(0xC6, 0xF6), + _INIT_DCS_CMD(0xC7, 0xFA), + _INIT_DCS_CMD(0xC8, 0xFC), + _INIT_DCS_CMD(0xC9, 0x00), + _INIT_DCS_CMD(0xCA, 0x00), + _INIT_DCS_CMD(0xCB, 0x16), + _INIT_DCS_CMD(0xCC, 0xAF), + _INIT_DCS_CMD(0xCD, 0xFF), + _INIT_DCS_CMD(0xCE, 0xFF), + _INIT_DCS_CMD(0xB0, 0x0A), + _INIT_DCS_CMD(0xB1, 0x00), + _INIT_DCS_CMD(0xB2, 0x02), + _INIT_DCS_CMD(0xB3, 0x0F), + _INIT_DCS_CMD(0xB4, 0x25), + _INIT_DCS_CMD(0xB5, 0x39), + _INIT_DCS_CMD(0xB6, 0x4E), + _INIT_DCS_CMD(0xB7, 0x72), + _INIT_DCS_CMD(0xB8, 0x97), + _INIT_DCS_CMD(0xB9, 0xDC), + _INIT_DCS_CMD(0xBA, 0x22), + _INIT_DCS_CMD(0xBB, 0xA4), + _INIT_DCS_CMD(0xBC, 0x2B), + _INIT_DCS_CMD(0xBD, 0x2F), + _INIT_DCS_CMD(0xBE, 0xA9), + _INIT_DCS_CMD(0xBF, 0x25), + _INIT_DCS_CMD(0xC0, 0x61), + _INIT_DCS_CMD(0xC1, 0x97), + _INIT_DCS_CMD(0xC2, 0xB2), + _INIT_DCS_CMD(0xC3, 0xCD), + _INIT_DCS_CMD(0xC4, 0xD9), + _INIT_DCS_CMD(0xC5, 0xE7), + _INIT_DCS_CMD(0xC6, 0xF4), + _INIT_DCS_CMD(0xC7, 0xFA), + _INIT_DCS_CMD(0xC8, 0xFC), + _INIT_DCS_CMD(0xC9, 0x00), + _INIT_DCS_CMD(0xCA, 0x00), + _INIT_DCS_CMD(0xCB, 0x16), + _INIT_DCS_CMD(0xCC, 0xAF), + _INIT_DCS_CMD(0xCD, 0xFF), + _INIT_DCS_CMD(0xCE, 0xFF), + _INIT_DCS_CMD(0xB0, 0x0B), + _INIT_DCS_CMD(0xB1, 0x04), + _INIT_DCS_CMD(0xB2, 0x05), + _INIT_DCS_CMD(0xB3, 0x11), + _INIT_DCS_CMD(0xB4, 0x24), + _INIT_DCS_CMD(0xB5, 0x39), + _INIT_DCS_CMD(0xB6, 0x4F), + _INIT_DCS_CMD(0xB7, 0x72), + _INIT_DCS_CMD(0xB8, 0x98), + _INIT_DCS_CMD(0xB9, 0xDC), + _INIT_DCS_CMD(0xBA, 0x23), + _INIT_DCS_CMD(0xBB, 0xA6), + _INIT_DCS_CMD(0xBC, 0x2C), + _INIT_DCS_CMD(0xBD, 0x30), + _INIT_DCS_CMD(0xBE, 0xAA), + _INIT_DCS_CMD(0xBF, 0x26), + _INIT_DCS_CMD(0xC0, 0x62), + _INIT_DCS_CMD(0xC1, 0x9B), + _INIT_DCS_CMD(0xC2, 0xB5), + _INIT_DCS_CMD(0xC3, 0xCF), + _INIT_DCS_CMD(0xC4, 0xDB), + _INIT_DCS_CMD(0xC5, 0xE8), + _INIT_DCS_CMD(0xC6, 0xF5), + _INIT_DCS_CMD(0xC7, 0xFA), + _INIT_DCS_CMD(0xC8, 0xFC), + _INIT_DCS_CMD(0xC9, 0x00), + _INIT_DCS_CMD(0xCA, 0x00), + _INIT_DCS_CMD(0xCB, 0x16), + _INIT_DCS_CMD(0xCC, 0xAF), + _INIT_DCS_CMD(0xCD, 0xFF), + _INIT_DCS_CMD(0xCE, 0xFF), + _INIT_DCS_CMD(0xB0, 0x0C), + _INIT_DCS_CMD(0xB1, 0x04), + _INIT_DCS_CMD(0xB2, 0x02), + _INIT_DCS_CMD(0xB3, 0x16), + _INIT_DCS_CMD(0xB4, 0x24), + _INIT_DCS_CMD(0xB5, 0x3B), + _INIT_DCS_CMD(0xB6, 0x4F), + _INIT_DCS_CMD(0xB7, 0x73), + _INIT_DCS_CMD(0xB8, 0x99), + _INIT_DCS_CMD(0xB9, 0xE0), + _INIT_DCS_CMD(0xBA, 0x26), + _INIT_DCS_CMD(0xBB, 0xAD), + _INIT_DCS_CMD(0xBC, 0x36), + _INIT_DCS_CMD(0xBD, 0x3A), + _INIT_DCS_CMD(0xBE, 0xAE), + _INIT_DCS_CMD(0xBF, 0x2A), + _INIT_DCS_CMD(0xC0, 0x66), + _INIT_DCS_CMD(0xC1, 0x9E), + _INIT_DCS_CMD(0xC2, 0xB8), + _INIT_DCS_CMD(0xC3, 0xD1), + _INIT_DCS_CMD(0xC4, 0xDD), + _INIT_DCS_CMD(0xC5, 0xE9), + _INIT_DCS_CMD(0xC6, 0xF6), + _INIT_DCS_CMD(0xC7, 0xFA), + _INIT_DCS_CMD(0xC8, 0xFC), + _INIT_DCS_CMD(0xC9, 0x00), + _INIT_DCS_CMD(0xCA, 0x00), + _INIT_DCS_CMD(0xCB, 0x16), + _INIT_DCS_CMD(0xCC, 0xAF), + _INIT_DCS_CMD(0xCD, 0xFF), + _INIT_DCS_CMD(0xCE, 0xFF), + _INIT_DCS_CMD(0xB0, 0x00), + _INIT_DCS_CMD(0xB3, 0x08), + _INIT_DCS_CMD(0xB0, 0x04), + _INIT_DCS_CMD(0xB8, 0x68), + _INIT_DELAY_CMD(150), + {}, +}; + +static inline struct boe_panel *to_boe_panel(struct drm_panel *panel) +{ + return container_of(panel, struct boe_panel, base); +} + +static int boe_panel_init_dcs_cmd(struct boe_panel *boe) +{ + struct mipi_dsi_device *dsi = boe->dsi; + struct drm_panel *panel = &boe->base; + int i, err = 0; + + if (boe->desc->init_cmds) { + const struct panel_init_cmd *init_cmds = boe->desc->init_cmds; + + for (i = 0; init_cmds[i].len != 0; i++) { + const struct panel_init_cmd *cmd = &init_cmds[i]; + + switch (cmd->type) { + case DELAY_CMD: + msleep(cmd->data[0]); + err = 0; + break; + + case INIT_DCS_CMD: + err = mipi_dsi_dcs_write(dsi, cmd->data[0], + cmd->len <= 1 ? NULL : + &cmd->data[1], + cmd->len - 1); + break; + + default: + err = -EINVAL; + } + + if (err < 0) { + dev_err(panel->dev, + "failed to write command %u\n", i); + return err; + } + } + } + return 0; +} + +static int boe_panel_enter_sleep_mode(struct boe_panel *boe) +{ + struct mipi_dsi_device *dsi = boe->dsi; + int ret; + + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; + + ret = mipi_dsi_dcs_set_display_off(dsi); + if (ret < 0) + return ret; + + ret = mipi_dsi_dcs_enter_sleep_mode(dsi); + if (ret < 0) + return ret; + + return 0; +} + +static int boe_panel_unprepare(struct drm_panel *panel) +{ + struct boe_panel *boe = to_boe_panel(panel); + int ret; + + if (!boe->prepared) + return 0; + + ret = boe_panel_enter_sleep_mode(boe); + if (ret < 0) { + dev_err(panel->dev, "failed to set panel off: %d\n", ret); + return ret; + } + + msleep(150); + gpiod_set_value(boe->enable_gpio, 0); + usleep_range(500, 1000); + regulator_disable(boe->avee); + regulator_disable(boe->avdd); + usleep_range(5000, 7000); + regulator_disable(boe->pp1800); + + boe->prepared = false; + + return 0; +} + +static int boe_panel_prepare(struct drm_panel *panel) +{ + struct boe_panel *boe = to_boe_panel(panel); + int ret; + + if (boe->prepared) + return 0; + + gpiod_set_value(boe->enable_gpio, 0); + usleep_range(1000, 1500); + + ret = regulator_enable(boe->pp1800); + if (ret < 0) + return ret; + + usleep_range(3000, 5000); + + ret = regulator_enable(boe->avdd); + if (ret < 0) + goto poweroff1v8; + ret = regulator_enable(boe->avee); + if (ret < 0) + goto poweroffavdd; + + usleep_range(5000, 10000); + + gpiod_set_value(boe->enable_gpio, 1); + usleep_range(1000, 2000); + gpiod_set_value(boe->enable_gpio, 0); + usleep_range(1000, 2000); + gpiod_set_value(boe->enable_gpio, 1); + usleep_range(6000, 10000); + + ret = boe_panel_init_dcs_cmd(boe); + if (ret < 0) { + dev_err(panel->dev, "failed to init panel: %d\n", ret); + goto poweroff; + } + + boe->prepared = true; + + return 0; + +poweroff: + regulator_disable(boe->avee); +poweroffavdd: + regulator_disable(boe->avdd); +poweroff1v8: + usleep_range(5000, 7000); + regulator_disable(boe->pp1800); + gpiod_set_value(boe->enable_gpio, 0); + + return ret; +} + +static int boe_panel_enable(struct drm_panel *panel) +{ + msleep(130); + return 0; +} + +static const struct drm_display_mode boe_tv101wum_nl6_default_mode = { + .clock = 159425, + .hdisplay = 1200, + .hsync_start = 1200 + 100, + .hsync_end = 1200 + 100 + 40, + .htotal = 1200 + 100 + 40 + 24, + .vdisplay = 1920, + .vsync_start = 1920 + 10, + .vsync_end = 1920 + 10 + 14, + .vtotal = 1920 + 10 + 14 + 4, + .vrefresh = 60, +}; + +static const struct panel_desc boe_tv101wum_nl6_desc = { + .modes = &boe_tv101wum_nl6_default_mode, + .bpc = 8, + .size = { + .width_mm = 135, + .height_mm = 216, + }, + .lanes = 4, + .format = MIPI_DSI_FMT_RGB888, + .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE | + MIPI_DSI_MODE_LPM, + .init_cmds = boe_init_cmd, +}; + +static int boe_panel_get_modes(struct drm_panel *panel, + struct drm_connector *connector) +{ + struct boe_panel *boe = to_boe_panel(panel); + const struct drm_display_mode *m = boe->desc->modes; + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(connector->dev, m); + if (!mode) { + dev_err(panel->dev, "failed to add mode %ux%u@%u\n", + m->hdisplay, m->vdisplay, m->vrefresh); + return -ENOMEM; + } + + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + drm_mode_set_name(mode); + drm_mode_probed_add(connector, mode); + + connector->display_info.width_mm = boe->desc->size.width_mm; + connector->display_info.height_mm = boe->desc->size.height_mm; + connector->display_info.bpc = boe->desc->bpc; + + return 1; +} + +static const struct drm_panel_funcs boe_panel_funcs = { + .unprepare = boe_panel_unprepare, + .prepare = boe_panel_prepare, + .enable = boe_panel_enable, + .get_modes = boe_panel_get_modes, +}; + +static int boe_panel_add(struct boe_panel *boe) +{ + struct device *dev = &boe->dsi->dev; + int err; + + boe->avdd = devm_regulator_get(dev, "avdd"); + if (IS_ERR(boe->avdd)) + return PTR_ERR(boe->avdd); + + boe->avee = devm_regulator_get(dev, "avee"); + if (IS_ERR(boe->avee)) + return PTR_ERR(boe->avee); + + boe->pp1800 = devm_regulator_get(dev, "pp1800"); + if (IS_ERR(boe->pp1800)) + return PTR_ERR(boe->pp1800); + + boe->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW); + if (IS_ERR(boe->enable_gpio)) { + dev_err(dev, "cannot get reset-gpios %ld\n", + PTR_ERR(boe->enable_gpio)); + return PTR_ERR(boe->enable_gpio); + } + + gpiod_set_value(boe->enable_gpio, 0); + + drm_panel_init(&boe->base, dev, &boe_panel_funcs, + DRM_MODE_CONNECTOR_DSI); + + err = drm_panel_of_backlight(&boe->base); + if (err) + return err; + + boe->base.funcs = &boe_panel_funcs; + boe->base.dev = &boe->dsi->dev; + + return drm_panel_add(&boe->base); +} + +static int boe_panel_probe(struct mipi_dsi_device *dsi) +{ + struct boe_panel *boe; + int ret; + const struct panel_desc *desc; + + boe = devm_kzalloc(&dsi->dev, sizeof(*boe), GFP_KERNEL); + if (!boe) + return -ENOMEM; + + desc = of_device_get_match_data(&dsi->dev); + dsi->lanes = desc->lanes; + dsi->format = desc->format; + dsi->mode_flags = desc->mode_flags; + boe->desc = desc; + boe->dsi = dsi; + ret = boe_panel_add(boe); + if (ret < 0) + return ret; + + mipi_dsi_set_drvdata(dsi, boe); + + ret = mipi_dsi_attach(dsi); + if (ret) + drm_panel_remove(&boe->base); + + return ret; +} + +static void boe_panel_shutdown(struct mipi_dsi_device *dsi) +{ + struct boe_panel *boe = mipi_dsi_get_drvdata(dsi); + + drm_panel_disable(&boe->base); + drm_panel_unprepare(&boe->base); +} + +static int boe_panel_remove(struct mipi_dsi_device *dsi) +{ + struct boe_panel *boe = mipi_dsi_get_drvdata(dsi); + int ret; + + boe_panel_shutdown(dsi); + + ret = mipi_dsi_detach(dsi); + if (ret < 0) + dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret); + + if (boe->base.dev) + drm_panel_remove(&boe->base); + + return 0; +} + +static const struct of_device_id boe_of_match[] = { + { .compatible = "boe,tv101wum-nl6", + .data = &boe_tv101wum_nl6_desc + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, boe_of_match); + +static struct mipi_dsi_driver boe_panel_driver = { + .driver = { + .name = "panel-boe-tv101wum-nl6", + .of_match_table = boe_of_match, + }, + .probe = boe_panel_probe, + .remove = boe_panel_remove, + .shutdown = boe_panel_shutdown, +}; +module_mipi_dsi_driver(boe_panel_driver); + +MODULE_AUTHOR("Jitao Shi <jitao.shi@mediatek.com>"); +MODULE_DESCRIPTION("BOE tv101wum-nl6 1200x1920 video mode panel driver"); +MODULE_LICENSE("GPL v2"); -- 2.21.0 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v9 2/5] drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel @ 2020-01-16 2:15 ` Jitao Shi 0 siblings, 0 replies; 27+ messages in thread From: Jitao Shi @ 2020-01-16 2:15 UTC (permalink / raw) To: Thierry Reding, Sam Ravnborg, David Airlie, Daniel Vetter, Matthias Brugger, dri-devel, linux-kernel Cc: Jitao Shi, srv_heupstream, stonea168, cawa.cheng, linux-mediatek, bibby.hsieh, ck.hu, yingjoe.chen, eddie.huang Add driver for BOE tv101wum-nl6 panel is a 10.1" 1200x1920 panel. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> --- drivers/gpu/drm/panel/Kconfig | 9 + drivers/gpu/drm/panel/Makefile | 1 + .../gpu/drm/panel/panel-boe-tv101wum-nl6.c | 693 ++++++++++++++++++ 3 files changed, 703 insertions(+) create mode 100644 drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index ae44ac2ec106..ca727c233a9a 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -29,6 +29,15 @@ config DRM_PANEL_BOE_HIMAX8279D 24 bit RGB per pixel. It provides a MIPI DSI interface to the host and has a built-in LED backlight. +config DRM_PANEL_BOE_TV101WUM_NL6 + tristate "BOE TV101WUM 1200x1920 panel" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to support for BOE TV101WUM WUXGA PANEL + DSI Video Mode panel + config DRM_PANEL_LVDS tristate "Generic LVDS panel driver" depends on OF diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile index 7c4d3c581fd4..a659ce403d0e 100644 --- a/drivers/gpu/drm/panel/Makefile +++ b/drivers/gpu/drm/panel/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_DRM_PANEL_ARM_VERSATILE) += panel-arm-versatile.o obj-$(CONFIG_DRM_PANEL_BOE_HIMAX8279D) += panel-boe-himax8279d.o +obj-$(CONFIG_DRM_PANEL_BOE_TV101WUM_NL6) += panel-boe-tv101wum-nl6.o obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o obj-$(CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D) += panel-feiyang-fy07024di26a30d.o diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c new file mode 100644 index 000000000000..51fde588adc1 --- /dev/null +++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c @@ -0,0 +1,693 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2018 MediaTek Inc. + * Author: Jitao Shi <jitao.shi@mediatek.com> + */ + +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/regulator/consumer.h> + +#include <drm/drm_crtc.h> +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_panel.h> + +#include <video/mipi_display.h> + +struct panel_desc { + const struct drm_display_mode *modes; + unsigned int bpc; + + /** + * @width_mm: width of the panel's active display area + * @height_mm: height of the panel's active display area + */ + struct { + unsigned int width_mm; + unsigned int height_mm; + } size; + + unsigned long mode_flags; + enum mipi_dsi_pixel_format format; + const struct panel_init_cmd *init_cmds; + unsigned int lanes; +}; + +struct boe_panel { + struct drm_panel base; + struct mipi_dsi_device *dsi; + + const struct panel_desc *desc; + + struct regulator *pp1800; + struct regulator *avee; + struct regulator *avdd; + struct gpio_desc *enable_gpio; + + bool prepared; +}; + +enum dsi_cmd_type { + INIT_DCS_CMD, + DELAY_CMD, +}; + +struct panel_init_cmd { + enum dsi_cmd_type type; + size_t len; + const char *data; +}; + +#define _INIT_DCS_CMD(...) { \ + .type = INIT_DCS_CMD, \ + .len = sizeof((char[]){__VA_ARGS__}), \ + .data = (char[]){__VA_ARGS__} } + +#define _INIT_DELAY_CMD(...) { \ + .type = DELAY_CMD,\ + .len = sizeof((char[]){__VA_ARGS__}), \ + .data = (char[]){__VA_ARGS__} } + +static const struct panel_init_cmd boe_init_cmd[] = { + _INIT_DELAY_CMD(24), + _INIT_DCS_CMD(0xB0, 0x05), + _INIT_DCS_CMD(0xB1, 0xE5), + _INIT_DCS_CMD(0xB3, 0x52), + _INIT_DCS_CMD(0xB0, 0x00), + _INIT_DCS_CMD(0xB3, 0x88), + _INIT_DCS_CMD(0xB0, 0x04), + _INIT_DCS_CMD(0xB8, 0x00), + _INIT_DCS_CMD(0xB0, 0x00), + _INIT_DCS_CMD(0xB6, 0x03), + _INIT_DCS_CMD(0xBA, 0x8B), + _INIT_DCS_CMD(0xBF, 0x1A), + _INIT_DCS_CMD(0xC0, 0x0F), + _INIT_DCS_CMD(0xC2, 0x0C), + _INIT_DCS_CMD(0xC3, 0x02), + _INIT_DCS_CMD(0xC4, 0x0C), + _INIT_DCS_CMD(0xC5, 0x02), + _INIT_DCS_CMD(0xB0, 0x01), + _INIT_DCS_CMD(0xE0, 0x26), + _INIT_DCS_CMD(0xE1, 0x26), + _INIT_DCS_CMD(0xDC, 0x00), + _INIT_DCS_CMD(0xDD, 0x00), + _INIT_DCS_CMD(0xCC, 0x26), + _INIT_DCS_CMD(0xCD, 0x26), + _INIT_DCS_CMD(0xC8, 0x00), + _INIT_DCS_CMD(0xC9, 0x00), + _INIT_DCS_CMD(0xD2, 0x03), + _INIT_DCS_CMD(0xD3, 0x03), + _INIT_DCS_CMD(0xE6, 0x04), + _INIT_DCS_CMD(0xE7, 0x04), + _INIT_DCS_CMD(0xC4, 0x09), + _INIT_DCS_CMD(0xC5, 0x09), + _INIT_DCS_CMD(0xD8, 0x0A), + _INIT_DCS_CMD(0xD9, 0x0A), + _INIT_DCS_CMD(0xC2, 0x0B), + _INIT_DCS_CMD(0xC3, 0x0B), + _INIT_DCS_CMD(0xD6, 0x0C), + _INIT_DCS_CMD(0xD7, 0x0C), + _INIT_DCS_CMD(0xC0, 0x05), + _INIT_DCS_CMD(0xC1, 0x05), + _INIT_DCS_CMD(0xD4, 0x06), + _INIT_DCS_CMD(0xD5, 0x06), + _INIT_DCS_CMD(0xCA, 0x07), + _INIT_DCS_CMD(0xCB, 0x07), + _INIT_DCS_CMD(0xDE, 0x08), + _INIT_DCS_CMD(0xDF, 0x08), + _INIT_DCS_CMD(0xB0, 0x02), + _INIT_DCS_CMD(0xC0, 0x00), + _INIT_DCS_CMD(0xC1, 0x0D), + _INIT_DCS_CMD(0xC2, 0x17), + _INIT_DCS_CMD(0xC3, 0x26), + _INIT_DCS_CMD(0xC4, 0x31), + _INIT_DCS_CMD(0xC5, 0x1C), + _INIT_DCS_CMD(0xC6, 0x2C), + _INIT_DCS_CMD(0xC7, 0x33), + _INIT_DCS_CMD(0xC8, 0x31), + _INIT_DCS_CMD(0xC9, 0x37), + _INIT_DCS_CMD(0xCA, 0x37), + _INIT_DCS_CMD(0xCB, 0x37), + _INIT_DCS_CMD(0xCC, 0x39), + _INIT_DCS_CMD(0xCD, 0x2E), + _INIT_DCS_CMD(0xCE, 0x2F), + _INIT_DCS_CMD(0xCF, 0x2F), + _INIT_DCS_CMD(0xD0, 0x07), + _INIT_DCS_CMD(0xD2, 0x00), + _INIT_DCS_CMD(0xD3, 0x0D), + _INIT_DCS_CMD(0xD4, 0x17), + _INIT_DCS_CMD(0xD5, 0x26), + _INIT_DCS_CMD(0xD6, 0x31), + _INIT_DCS_CMD(0xD7, 0x3F), + _INIT_DCS_CMD(0xD8, 0x3F), + _INIT_DCS_CMD(0xD9, 0x3F), + _INIT_DCS_CMD(0xDA, 0x3F), + _INIT_DCS_CMD(0xDB, 0x37), + _INIT_DCS_CMD(0xDC, 0x37), + _INIT_DCS_CMD(0xDD, 0x37), + _INIT_DCS_CMD(0xDE, 0x39), + _INIT_DCS_CMD(0xDF, 0x2E), + _INIT_DCS_CMD(0xE0, 0x2F), + _INIT_DCS_CMD(0xE1, 0x2F), + _INIT_DCS_CMD(0xE2, 0x07), + _INIT_DCS_CMD(0xB0, 0x03), + _INIT_DCS_CMD(0xC8, 0x0B), + _INIT_DCS_CMD(0xC9, 0x07), + _INIT_DCS_CMD(0xC3, 0x00), + _INIT_DCS_CMD(0xE7, 0x00), + _INIT_DCS_CMD(0xC5, 0x2A), + _INIT_DCS_CMD(0xDE, 0x2A), + _INIT_DCS_CMD(0xCA, 0x43), + _INIT_DCS_CMD(0xC9, 0x07), + _INIT_DCS_CMD(0xE4, 0xC0), + _INIT_DCS_CMD(0xE5, 0x0D), + _INIT_DCS_CMD(0xCB, 0x00), + _INIT_DCS_CMD(0xB0, 0x06), + _INIT_DCS_CMD(0xB8, 0xA5), + _INIT_DCS_CMD(0xC0, 0xA5), + _INIT_DCS_CMD(0xC7, 0x0F), + _INIT_DCS_CMD(0xD5, 0x32), + _INIT_DCS_CMD(0xB8, 0x00), + _INIT_DCS_CMD(0xC0, 0x00), + _INIT_DCS_CMD(0xBC, 0x00), + _INIT_DCS_CMD(0xB0, 0x07), + _INIT_DCS_CMD(0xB1, 0x00), + _INIT_DCS_CMD(0xB2, 0x02), + _INIT_DCS_CMD(0xB3, 0x0F), + _INIT_DCS_CMD(0xB4, 0x25), + _INIT_DCS_CMD(0xB5, 0x39), + _INIT_DCS_CMD(0xB6, 0x4E), + _INIT_DCS_CMD(0xB7, 0x72), + _INIT_DCS_CMD(0xB8, 0x97), + _INIT_DCS_CMD(0xB9, 0xDC), + _INIT_DCS_CMD(0xBA, 0x22), + _INIT_DCS_CMD(0xBB, 0xA4), + _INIT_DCS_CMD(0xBC, 0x2B), + _INIT_DCS_CMD(0xBD, 0x2F), + _INIT_DCS_CMD(0xBE, 0xA9), + _INIT_DCS_CMD(0xBF, 0x25), + _INIT_DCS_CMD(0xC0, 0x61), + _INIT_DCS_CMD(0xC1, 0x97), + _INIT_DCS_CMD(0xC2, 0xB2), + _INIT_DCS_CMD(0xC3, 0xCD), + _INIT_DCS_CMD(0xC4, 0xD9), + _INIT_DCS_CMD(0xC5, 0xE7), + _INIT_DCS_CMD(0xC6, 0xF4), + _INIT_DCS_CMD(0xC7, 0xFA), + _INIT_DCS_CMD(0xC8, 0xFC), + _INIT_DCS_CMD(0xC9, 0x00), + _INIT_DCS_CMD(0xCA, 0x00), + _INIT_DCS_CMD(0xCB, 0x16), + _INIT_DCS_CMD(0xCC, 0xAF), + _INIT_DCS_CMD(0xCD, 0xFF), + _INIT_DCS_CMD(0xCE, 0xFF), + _INIT_DCS_CMD(0xB0, 0x08), + _INIT_DCS_CMD(0xB1, 0x04), + _INIT_DCS_CMD(0xB2, 0x05), + _INIT_DCS_CMD(0xB3, 0x11), + _INIT_DCS_CMD(0xB4, 0x24), + _INIT_DCS_CMD(0xB5, 0x39), + _INIT_DCS_CMD(0xB6, 0x4F), + _INIT_DCS_CMD(0xB7, 0x72), + _INIT_DCS_CMD(0xB8, 0x98), + _INIT_DCS_CMD(0xB9, 0xDC), + _INIT_DCS_CMD(0xBA, 0x23), + _INIT_DCS_CMD(0xBB, 0xA6), + _INIT_DCS_CMD(0xBC, 0x2C), + _INIT_DCS_CMD(0xBD, 0x30), + _INIT_DCS_CMD(0xBE, 0xAA), + _INIT_DCS_CMD(0xBF, 0x26), + _INIT_DCS_CMD(0xC0, 0x62), + _INIT_DCS_CMD(0xC1, 0x9B), + _INIT_DCS_CMD(0xC2, 0xB5), + _INIT_DCS_CMD(0xC3, 0xCF), + _INIT_DCS_CMD(0xC4, 0xDB), + _INIT_DCS_CMD(0xC5, 0xE8), + _INIT_DCS_CMD(0xC6, 0xF5), + _INIT_DCS_CMD(0xC7, 0xFA), + _INIT_DCS_CMD(0xC8, 0xFC), + _INIT_DCS_CMD(0xC9, 0x00), + _INIT_DCS_CMD(0xCA, 0x00), + _INIT_DCS_CMD(0xCB, 0x16), + _INIT_DCS_CMD(0xCC, 0xAF), + _INIT_DCS_CMD(0xCD, 0xFF), + _INIT_DCS_CMD(0xCE, 0xFF), + _INIT_DCS_CMD(0xB0, 0x09), + _INIT_DCS_CMD(0xB1, 0x04), + _INIT_DCS_CMD(0xB2, 0x02), + _INIT_DCS_CMD(0xB3, 0x16), + _INIT_DCS_CMD(0xB4, 0x24), + _INIT_DCS_CMD(0xB5, 0x3B), + _INIT_DCS_CMD(0xB6, 0x4F), + _INIT_DCS_CMD(0xB7, 0x73), + _INIT_DCS_CMD(0xB8, 0x99), + _INIT_DCS_CMD(0xB9, 0xE0), + _INIT_DCS_CMD(0xBA, 0x26), + _INIT_DCS_CMD(0xBB, 0xAD), + _INIT_DCS_CMD(0xBC, 0x36), + _INIT_DCS_CMD(0xBD, 0x3A), + _INIT_DCS_CMD(0xBE, 0xAE), + _INIT_DCS_CMD(0xBF, 0x2A), + _INIT_DCS_CMD(0xC0, 0x66), + _INIT_DCS_CMD(0xC1, 0x9E), + _INIT_DCS_CMD(0xC2, 0xB8), + _INIT_DCS_CMD(0xC3, 0xD1), + _INIT_DCS_CMD(0xC4, 0xDD), + _INIT_DCS_CMD(0xC5, 0xE9), + _INIT_DCS_CMD(0xC6, 0xF6), + _INIT_DCS_CMD(0xC7, 0xFA), + _INIT_DCS_CMD(0xC8, 0xFC), + _INIT_DCS_CMD(0xC9, 0x00), + _INIT_DCS_CMD(0xCA, 0x00), + _INIT_DCS_CMD(0xCB, 0x16), + _INIT_DCS_CMD(0xCC, 0xAF), + _INIT_DCS_CMD(0xCD, 0xFF), + _INIT_DCS_CMD(0xCE, 0xFF), + _INIT_DCS_CMD(0xB0, 0x0A), + _INIT_DCS_CMD(0xB1, 0x00), + _INIT_DCS_CMD(0xB2, 0x02), + _INIT_DCS_CMD(0xB3, 0x0F), + _INIT_DCS_CMD(0xB4, 0x25), + _INIT_DCS_CMD(0xB5, 0x39), + _INIT_DCS_CMD(0xB6, 0x4E), + _INIT_DCS_CMD(0xB7, 0x72), + _INIT_DCS_CMD(0xB8, 0x97), + _INIT_DCS_CMD(0xB9, 0xDC), + _INIT_DCS_CMD(0xBA, 0x22), + _INIT_DCS_CMD(0xBB, 0xA4), + _INIT_DCS_CMD(0xBC, 0x2B), + _INIT_DCS_CMD(0xBD, 0x2F), + _INIT_DCS_CMD(0xBE, 0xA9), + _INIT_DCS_CMD(0xBF, 0x25), + _INIT_DCS_CMD(0xC0, 0x61), + _INIT_DCS_CMD(0xC1, 0x97), + _INIT_DCS_CMD(0xC2, 0xB2), + _INIT_DCS_CMD(0xC3, 0xCD), + _INIT_DCS_CMD(0xC4, 0xD9), + _INIT_DCS_CMD(0xC5, 0xE7), + _INIT_DCS_CMD(0xC6, 0xF4), + _INIT_DCS_CMD(0xC7, 0xFA), + _INIT_DCS_CMD(0xC8, 0xFC), + _INIT_DCS_CMD(0xC9, 0x00), + _INIT_DCS_CMD(0xCA, 0x00), + _INIT_DCS_CMD(0xCB, 0x16), + _INIT_DCS_CMD(0xCC, 0xAF), + _INIT_DCS_CMD(0xCD, 0xFF), + _INIT_DCS_CMD(0xCE, 0xFF), + _INIT_DCS_CMD(0xB0, 0x0B), + _INIT_DCS_CMD(0xB1, 0x04), + _INIT_DCS_CMD(0xB2, 0x05), + _INIT_DCS_CMD(0xB3, 0x11), + _INIT_DCS_CMD(0xB4, 0x24), + _INIT_DCS_CMD(0xB5, 0x39), + _INIT_DCS_CMD(0xB6, 0x4F), + _INIT_DCS_CMD(0xB7, 0x72), + _INIT_DCS_CMD(0xB8, 0x98), + _INIT_DCS_CMD(0xB9, 0xDC), + _INIT_DCS_CMD(0xBA, 0x23), + _INIT_DCS_CMD(0xBB, 0xA6), + _INIT_DCS_CMD(0xBC, 0x2C), + _INIT_DCS_CMD(0xBD, 0x30), + _INIT_DCS_CMD(0xBE, 0xAA), + _INIT_DCS_CMD(0xBF, 0x26), + _INIT_DCS_CMD(0xC0, 0x62), + _INIT_DCS_CMD(0xC1, 0x9B), + _INIT_DCS_CMD(0xC2, 0xB5), + _INIT_DCS_CMD(0xC3, 0xCF), + _INIT_DCS_CMD(0xC4, 0xDB), + _INIT_DCS_CMD(0xC5, 0xE8), + _INIT_DCS_CMD(0xC6, 0xF5), + _INIT_DCS_CMD(0xC7, 0xFA), + _INIT_DCS_CMD(0xC8, 0xFC), + _INIT_DCS_CMD(0xC9, 0x00), + _INIT_DCS_CMD(0xCA, 0x00), + _INIT_DCS_CMD(0xCB, 0x16), + _INIT_DCS_CMD(0xCC, 0xAF), + _INIT_DCS_CMD(0xCD, 0xFF), + _INIT_DCS_CMD(0xCE, 0xFF), + _INIT_DCS_CMD(0xB0, 0x0C), + _INIT_DCS_CMD(0xB1, 0x04), + _INIT_DCS_CMD(0xB2, 0x02), + _INIT_DCS_CMD(0xB3, 0x16), + _INIT_DCS_CMD(0xB4, 0x24), + _INIT_DCS_CMD(0xB5, 0x3B), + _INIT_DCS_CMD(0xB6, 0x4F), + _INIT_DCS_CMD(0xB7, 0x73), + _INIT_DCS_CMD(0xB8, 0x99), + _INIT_DCS_CMD(0xB9, 0xE0), + _INIT_DCS_CMD(0xBA, 0x26), + _INIT_DCS_CMD(0xBB, 0xAD), + _INIT_DCS_CMD(0xBC, 0x36), + _INIT_DCS_CMD(0xBD, 0x3A), + _INIT_DCS_CMD(0xBE, 0xAE), + _INIT_DCS_CMD(0xBF, 0x2A), + _INIT_DCS_CMD(0xC0, 0x66), + _INIT_DCS_CMD(0xC1, 0x9E), + _INIT_DCS_CMD(0xC2, 0xB8), + _INIT_DCS_CMD(0xC3, 0xD1), + _INIT_DCS_CMD(0xC4, 0xDD), + _INIT_DCS_CMD(0xC5, 0xE9), + _INIT_DCS_CMD(0xC6, 0xF6), + _INIT_DCS_CMD(0xC7, 0xFA), + _INIT_DCS_CMD(0xC8, 0xFC), + _INIT_DCS_CMD(0xC9, 0x00), + _INIT_DCS_CMD(0xCA, 0x00), + _INIT_DCS_CMD(0xCB, 0x16), + _INIT_DCS_CMD(0xCC, 0xAF), + _INIT_DCS_CMD(0xCD, 0xFF), + _INIT_DCS_CMD(0xCE, 0xFF), + _INIT_DCS_CMD(0xB0, 0x00), + _INIT_DCS_CMD(0xB3, 0x08), + _INIT_DCS_CMD(0xB0, 0x04), + _INIT_DCS_CMD(0xB8, 0x68), + _INIT_DELAY_CMD(150), + {}, +}; + +static inline struct boe_panel *to_boe_panel(struct drm_panel *panel) +{ + return container_of(panel, struct boe_panel, base); +} + +static int boe_panel_init_dcs_cmd(struct boe_panel *boe) +{ + struct mipi_dsi_device *dsi = boe->dsi; + struct drm_panel *panel = &boe->base; + int i, err = 0; + + if (boe->desc->init_cmds) { + const struct panel_init_cmd *init_cmds = boe->desc->init_cmds; + + for (i = 0; init_cmds[i].len != 0; i++) { + const struct panel_init_cmd *cmd = &init_cmds[i]; + + switch (cmd->type) { + case DELAY_CMD: + msleep(cmd->data[0]); + err = 0; + break; + + case INIT_DCS_CMD: + err = mipi_dsi_dcs_write(dsi, cmd->data[0], + cmd->len <= 1 ? NULL : + &cmd->data[1], + cmd->len - 1); + break; + + default: + err = -EINVAL; + } + + if (err < 0) { + dev_err(panel->dev, + "failed to write command %u\n", i); + return err; + } + } + } + return 0; +} + +static int boe_panel_enter_sleep_mode(struct boe_panel *boe) +{ + struct mipi_dsi_device *dsi = boe->dsi; + int ret; + + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; + + ret = mipi_dsi_dcs_set_display_off(dsi); + if (ret < 0) + return ret; + + ret = mipi_dsi_dcs_enter_sleep_mode(dsi); + if (ret < 0) + return ret; + + return 0; +} + +static int boe_panel_unprepare(struct drm_panel *panel) +{ + struct boe_panel *boe = to_boe_panel(panel); + int ret; + + if (!boe->prepared) + return 0; + + ret = boe_panel_enter_sleep_mode(boe); + if (ret < 0) { + dev_err(panel->dev, "failed to set panel off: %d\n", ret); + return ret; + } + + msleep(150); + gpiod_set_value(boe->enable_gpio, 0); + usleep_range(500, 1000); + regulator_disable(boe->avee); + regulator_disable(boe->avdd); + usleep_range(5000, 7000); + regulator_disable(boe->pp1800); + + boe->prepared = false; + + return 0; +} + +static int boe_panel_prepare(struct drm_panel *panel) +{ + struct boe_panel *boe = to_boe_panel(panel); + int ret; + + if (boe->prepared) + return 0; + + gpiod_set_value(boe->enable_gpio, 0); + usleep_range(1000, 1500); + + ret = regulator_enable(boe->pp1800); + if (ret < 0) + return ret; + + usleep_range(3000, 5000); + + ret = regulator_enable(boe->avdd); + if (ret < 0) + goto poweroff1v8; + ret = regulator_enable(boe->avee); + if (ret < 0) + goto poweroffavdd; + + usleep_range(5000, 10000); + + gpiod_set_value(boe->enable_gpio, 1); + usleep_range(1000, 2000); + gpiod_set_value(boe->enable_gpio, 0); + usleep_range(1000, 2000); + gpiod_set_value(boe->enable_gpio, 1); + usleep_range(6000, 10000); + + ret = boe_panel_init_dcs_cmd(boe); + if (ret < 0) { + dev_err(panel->dev, "failed to init panel: %d\n", ret); + goto poweroff; + } + + boe->prepared = true; + + return 0; + +poweroff: + regulator_disable(boe->avee); +poweroffavdd: + regulator_disable(boe->avdd); +poweroff1v8: + usleep_range(5000, 7000); + regulator_disable(boe->pp1800); + gpiod_set_value(boe->enable_gpio, 0); + + return ret; +} + +static int boe_panel_enable(struct drm_panel *panel) +{ + msleep(130); + return 0; +} + +static const struct drm_display_mode boe_tv101wum_nl6_default_mode = { + .clock = 159425, + .hdisplay = 1200, + .hsync_start = 1200 + 100, + .hsync_end = 1200 + 100 + 40, + .htotal = 1200 + 100 + 40 + 24, + .vdisplay = 1920, + .vsync_start = 1920 + 10, + .vsync_end = 1920 + 10 + 14, + .vtotal = 1920 + 10 + 14 + 4, + .vrefresh = 60, +}; + +static const struct panel_desc boe_tv101wum_nl6_desc = { + .modes = &boe_tv101wum_nl6_default_mode, + .bpc = 8, + .size = { + .width_mm = 135, + .height_mm = 216, + }, + .lanes = 4, + .format = MIPI_DSI_FMT_RGB888, + .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE | + MIPI_DSI_MODE_LPM, + .init_cmds = boe_init_cmd, +}; + +static int boe_panel_get_modes(struct drm_panel *panel, + struct drm_connector *connector) +{ + struct boe_panel *boe = to_boe_panel(panel); + const struct drm_display_mode *m = boe->desc->modes; + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(connector->dev, m); + if (!mode) { + dev_err(panel->dev, "failed to add mode %ux%u@%u\n", + m->hdisplay, m->vdisplay, m->vrefresh); + return -ENOMEM; + } + + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + drm_mode_set_name(mode); + drm_mode_probed_add(connector, mode); + + connector->display_info.width_mm = boe->desc->size.width_mm; + connector->display_info.height_mm = boe->desc->size.height_mm; + connector->display_info.bpc = boe->desc->bpc; + + return 1; +} + +static const struct drm_panel_funcs boe_panel_funcs = { + .unprepare = boe_panel_unprepare, + .prepare = boe_panel_prepare, + .enable = boe_panel_enable, + .get_modes = boe_panel_get_modes, +}; + +static int boe_panel_add(struct boe_panel *boe) +{ + struct device *dev = &boe->dsi->dev; + int err; + + boe->avdd = devm_regulator_get(dev, "avdd"); + if (IS_ERR(boe->avdd)) + return PTR_ERR(boe->avdd); + + boe->avee = devm_regulator_get(dev, "avee"); + if (IS_ERR(boe->avee)) + return PTR_ERR(boe->avee); + + boe->pp1800 = devm_regulator_get(dev, "pp1800"); + if (IS_ERR(boe->pp1800)) + return PTR_ERR(boe->pp1800); + + boe->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW); + if (IS_ERR(boe->enable_gpio)) { + dev_err(dev, "cannot get reset-gpios %ld\n", + PTR_ERR(boe->enable_gpio)); + return PTR_ERR(boe->enable_gpio); + } + + gpiod_set_value(boe->enable_gpio, 0); + + drm_panel_init(&boe->base, dev, &boe_panel_funcs, + DRM_MODE_CONNECTOR_DSI); + + err = drm_panel_of_backlight(&boe->base); + if (err) + return err; + + boe->base.funcs = &boe_panel_funcs; + boe->base.dev = &boe->dsi->dev; + + return drm_panel_add(&boe->base); +} + +static int boe_panel_probe(struct mipi_dsi_device *dsi) +{ + struct boe_panel *boe; + int ret; + const struct panel_desc *desc; + + boe = devm_kzalloc(&dsi->dev, sizeof(*boe), GFP_KERNEL); + if (!boe) + return -ENOMEM; + + desc = of_device_get_match_data(&dsi->dev); + dsi->lanes = desc->lanes; + dsi->format = desc->format; + dsi->mode_flags = desc->mode_flags; + boe->desc = desc; + boe->dsi = dsi; + ret = boe_panel_add(boe); + if (ret < 0) + return ret; + + mipi_dsi_set_drvdata(dsi, boe); + + ret = mipi_dsi_attach(dsi); + if (ret) + drm_panel_remove(&boe->base); + + return ret; +} + +static void boe_panel_shutdown(struct mipi_dsi_device *dsi) +{ + struct boe_panel *boe = mipi_dsi_get_drvdata(dsi); + + drm_panel_disable(&boe->base); + drm_panel_unprepare(&boe->base); +} + +static int boe_panel_remove(struct mipi_dsi_device *dsi) +{ + struct boe_panel *boe = mipi_dsi_get_drvdata(dsi); + int ret; + + boe_panel_shutdown(dsi); + + ret = mipi_dsi_detach(dsi); + if (ret < 0) + dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret); + + if (boe->base.dev) + drm_panel_remove(&boe->base); + + return 0; +} + +static const struct of_device_id boe_of_match[] = { + { .compatible = "boe,tv101wum-nl6", + .data = &boe_tv101wum_nl6_desc + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, boe_of_match); + +static struct mipi_dsi_driver boe_panel_driver = { + .driver = { + .name = "panel-boe-tv101wum-nl6", + .of_match_table = boe_of_match, + }, + .probe = boe_panel_probe, + .remove = boe_panel_remove, + .shutdown = boe_panel_shutdown, +}; +module_mipi_dsi_driver(boe_panel_driver); + +MODULE_AUTHOR("Jitao Shi <jitao.shi@mediatek.com>"); +MODULE_DESCRIPTION("BOE tv101wum-nl6 1200x1920 video mode panel driver"); +MODULE_LICENSE("GPL v2"); -- 2.21.0 _______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v9 3/5] drm/panel: support for auo,kd101n80-45na wuxga dsi video mode panel 2020-01-16 2:15 ` Jitao Shi (?) @ 2020-01-16 2:15 ` Jitao Shi -1 siblings, 0 replies; 27+ messages in thread From: Jitao Shi @ 2020-01-16 2:15 UTC (permalink / raw) To: Thierry Reding, Sam Ravnborg, David Airlie, Daniel Vetter, Matthias Brugger, dri-devel, linux-kernel Cc: linux-mediatek, srv_heupstream, yingjoe.chen, eddie.huang, cawa.cheng, bibby.hsieh, ck.hu, stonea168, Jitao Shi Auo,kd101n80-45na's connector is same as boe,tv101wum-nl6. The most codes can be reuse. So auo,kd101n80-45na and boe,tv101wum-nl6 use one driver file. Add the different parts in driver data. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> --- drivers/gpu/drm/panel/Kconfig | 6 +- .../gpu/drm/panel/panel-boe-tv101wum-nl6.c | 64 +++++++++++++++++-- 2 files changed, 61 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index ca727c233a9a..b5413edd625b 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -30,13 +30,13 @@ config DRM_PANEL_BOE_HIMAX8279D the host and has a built-in LED backlight. config DRM_PANEL_BOE_TV101WUM_NL6 - tristate "BOE TV101WUM 1200x1920 panel" + tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help - Say Y here if you want to support for BOE TV101WUM WUXGA PANEL - DSI Video Mode panel + Say Y here if you want to support for BOE TV101WUM and AUO KD101N80 + 45NA WUXGA PANEL DSI Video Mode panel config DRM_PANEL_LVDS tristate "Generic LVDS panel driver" diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c index 51fde588adc1..2160144ca51b 100644 --- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c +++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c @@ -34,6 +34,7 @@ struct panel_desc { enum mipi_dsi_pixel_format format; const struct panel_init_cmd *init_cmds; unsigned int lanes; + bool discharge_on_disable; }; struct boe_panel { @@ -367,6 +368,15 @@ static const struct panel_init_cmd boe_init_cmd[] = { {}, }; +static const struct panel_init_cmd auo_kd101n80_45na_init_cmd[] = { + _INIT_DELAY_CMD(24), + _INIT_DCS_CMD(0x11), + _INIT_DELAY_CMD(120), + _INIT_DCS_CMD(0x29), + _INIT_DELAY_CMD(120), + {}, +}; + static inline struct boe_panel *to_boe_panel(struct drm_panel *panel) { return container_of(panel, struct boe_panel, base); @@ -444,12 +454,22 @@ static int boe_panel_unprepare(struct drm_panel *panel) } msleep(150); - gpiod_set_value(boe->enable_gpio, 0); - usleep_range(500, 1000); - regulator_disable(boe->avee); - regulator_disable(boe->avdd); - usleep_range(5000, 7000); - regulator_disable(boe->pp1800); + + if (boe->desc->discharge_on_disable) { + regulator_disable(boe->avee); + regulator_disable(boe->avdd); + usleep_range(5000, 7000); + gpiod_set_value(boe->enable_gpio, 0); + usleep_range(5000, 7000); + regulator_disable(boe->pp1800); + } else { + gpiod_set_value(boe->enable_gpio, 0); + usleep_range(500, 1000); + regulator_disable(boe->avee); + regulator_disable(boe->avdd); + usleep_range(5000, 7000); + regulator_disable(boe->pp1800); + } boe->prepared = false; @@ -542,6 +562,35 @@ static const struct panel_desc boe_tv101wum_nl6_desc = { .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE | MIPI_DSI_MODE_LPM, .init_cmds = boe_init_cmd, + .discharge_on_disable = false, +}; + +static const struct drm_display_mode auo_kd101n80_45na_default_mode = { + .clock = 157000, + .hdisplay = 1200, + .hsync_start = 1200 + 80, + .hsync_end = 1200 + 80 + 24, + .htotal = 1200 + 80 + 24 + 36, + .vdisplay = 1920, + .vsync_start = 1920 + 16, + .vsync_end = 1920 + 16 + 4, + .vtotal = 1920 + 16 + 4 + 16, + .vrefresh = 60, +}; + +static const struct panel_desc auo_kd101n80_45na_desc = { + .modes = &auo_kd101n80_45na_default_mode, + .bpc = 8, + .size = { + .width_mm = 135, + .height_mm = 216, + }, + .lanes = 4, + .format = MIPI_DSI_FMT_RGB888, + .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE | + MIPI_DSI_MODE_LPM, + .init_cmds = auo_kd101n80_45na_init_cmd, + .discharge_on_disable = true, }; static int boe_panel_get_modes(struct drm_panel *panel, @@ -673,6 +722,9 @@ static const struct of_device_id boe_of_match[] = { { .compatible = "boe,tv101wum-nl6", .data = &boe_tv101wum_nl6_desc }, + { .compatible = "auo,kd101n80-45na", + .data = &auo_kd101n80_45na_desc + }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, boe_of_match); -- 2.21.0 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v9 3/5] drm/panel: support for auo, kd101n80-45na wuxga dsi video mode panel @ 2020-01-16 2:15 ` Jitao Shi 0 siblings, 0 replies; 27+ messages in thread From: Jitao Shi @ 2020-01-16 2:15 UTC (permalink / raw) To: Thierry Reding, Sam Ravnborg, David Airlie, Daniel Vetter, Matthias Brugger, dri-devel, linux-kernel Cc: Jitao Shi, srv_heupstream, stonea168, cawa.cheng, linux-mediatek, yingjoe.chen, eddie.huang Auo,kd101n80-45na's connector is same as boe,tv101wum-nl6. The most codes can be reuse. So auo,kd101n80-45na and boe,tv101wum-nl6 use one driver file. Add the different parts in driver data. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> --- drivers/gpu/drm/panel/Kconfig | 6 +- .../gpu/drm/panel/panel-boe-tv101wum-nl6.c | 64 +++++++++++++++++-- 2 files changed, 61 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index ca727c233a9a..b5413edd625b 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -30,13 +30,13 @@ config DRM_PANEL_BOE_HIMAX8279D the host and has a built-in LED backlight. config DRM_PANEL_BOE_TV101WUM_NL6 - tristate "BOE TV101WUM 1200x1920 panel" + tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help - Say Y here if you want to support for BOE TV101WUM WUXGA PANEL - DSI Video Mode panel + Say Y here if you want to support for BOE TV101WUM and AUO KD101N80 + 45NA WUXGA PANEL DSI Video Mode panel config DRM_PANEL_LVDS tristate "Generic LVDS panel driver" diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c index 51fde588adc1..2160144ca51b 100644 --- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c +++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c @@ -34,6 +34,7 @@ struct panel_desc { enum mipi_dsi_pixel_format format; const struct panel_init_cmd *init_cmds; unsigned int lanes; + bool discharge_on_disable; }; struct boe_panel { @@ -367,6 +368,15 @@ static const struct panel_init_cmd boe_init_cmd[] = { {}, }; +static const struct panel_init_cmd auo_kd101n80_45na_init_cmd[] = { + _INIT_DELAY_CMD(24), + _INIT_DCS_CMD(0x11), + _INIT_DELAY_CMD(120), + _INIT_DCS_CMD(0x29), + _INIT_DELAY_CMD(120), + {}, +}; + static inline struct boe_panel *to_boe_panel(struct drm_panel *panel) { return container_of(panel, struct boe_panel, base); @@ -444,12 +454,22 @@ static int boe_panel_unprepare(struct drm_panel *panel) } msleep(150); - gpiod_set_value(boe->enable_gpio, 0); - usleep_range(500, 1000); - regulator_disable(boe->avee); - regulator_disable(boe->avdd); - usleep_range(5000, 7000); - regulator_disable(boe->pp1800); + + if (boe->desc->discharge_on_disable) { + regulator_disable(boe->avee); + regulator_disable(boe->avdd); + usleep_range(5000, 7000); + gpiod_set_value(boe->enable_gpio, 0); + usleep_range(5000, 7000); + regulator_disable(boe->pp1800); + } else { + gpiod_set_value(boe->enable_gpio, 0); + usleep_range(500, 1000); + regulator_disable(boe->avee); + regulator_disable(boe->avdd); + usleep_range(5000, 7000); + regulator_disable(boe->pp1800); + } boe->prepared = false; @@ -542,6 +562,35 @@ static const struct panel_desc boe_tv101wum_nl6_desc = { .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE | MIPI_DSI_MODE_LPM, .init_cmds = boe_init_cmd, + .discharge_on_disable = false, +}; + +static const struct drm_display_mode auo_kd101n80_45na_default_mode = { + .clock = 157000, + .hdisplay = 1200, + .hsync_start = 1200 + 80, + .hsync_end = 1200 + 80 + 24, + .htotal = 1200 + 80 + 24 + 36, + .vdisplay = 1920, + .vsync_start = 1920 + 16, + .vsync_end = 1920 + 16 + 4, + .vtotal = 1920 + 16 + 4 + 16, + .vrefresh = 60, +}; + +static const struct panel_desc auo_kd101n80_45na_desc = { + .modes = &auo_kd101n80_45na_default_mode, + .bpc = 8, + .size = { + .width_mm = 135, + .height_mm = 216, + }, + .lanes = 4, + .format = MIPI_DSI_FMT_RGB888, + .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE | + MIPI_DSI_MODE_LPM, + .init_cmds = auo_kd101n80_45na_init_cmd, + .discharge_on_disable = true, }; static int boe_panel_get_modes(struct drm_panel *panel, @@ -673,6 +722,9 @@ static const struct of_device_id boe_of_match[] = { { .compatible = "boe,tv101wum-nl6", .data = &boe_tv101wum_nl6_desc }, + { .compatible = "auo,kd101n80-45na", + .data = &auo_kd101n80_45na_desc + }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, boe_of_match); -- 2.21.0 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v9 3/5] drm/panel: support for auo, kd101n80-45na wuxga dsi video mode panel @ 2020-01-16 2:15 ` Jitao Shi 0 siblings, 0 replies; 27+ messages in thread From: Jitao Shi @ 2020-01-16 2:15 UTC (permalink / raw) To: Thierry Reding, Sam Ravnborg, David Airlie, Daniel Vetter, Matthias Brugger, dri-devel, linux-kernel Cc: Jitao Shi, srv_heupstream, stonea168, cawa.cheng, linux-mediatek, bibby.hsieh, ck.hu, yingjoe.chen, eddie.huang Auo,kd101n80-45na's connector is same as boe,tv101wum-nl6. The most codes can be reuse. So auo,kd101n80-45na and boe,tv101wum-nl6 use one driver file. Add the different parts in driver data. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> --- drivers/gpu/drm/panel/Kconfig | 6 +- .../gpu/drm/panel/panel-boe-tv101wum-nl6.c | 64 +++++++++++++++++-- 2 files changed, 61 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index ca727c233a9a..b5413edd625b 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -30,13 +30,13 @@ config DRM_PANEL_BOE_HIMAX8279D the host and has a built-in LED backlight. config DRM_PANEL_BOE_TV101WUM_NL6 - tristate "BOE TV101WUM 1200x1920 panel" + tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel" depends on OF depends on DRM_MIPI_DSI depends on BACKLIGHT_CLASS_DEVICE help - Say Y here if you want to support for BOE TV101WUM WUXGA PANEL - DSI Video Mode panel + Say Y here if you want to support for BOE TV101WUM and AUO KD101N80 + 45NA WUXGA PANEL DSI Video Mode panel config DRM_PANEL_LVDS tristate "Generic LVDS panel driver" diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c index 51fde588adc1..2160144ca51b 100644 --- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c +++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c @@ -34,6 +34,7 @@ struct panel_desc { enum mipi_dsi_pixel_format format; const struct panel_init_cmd *init_cmds; unsigned int lanes; + bool discharge_on_disable; }; struct boe_panel { @@ -367,6 +368,15 @@ static const struct panel_init_cmd boe_init_cmd[] = { {}, }; +static const struct panel_init_cmd auo_kd101n80_45na_init_cmd[] = { + _INIT_DELAY_CMD(24), + _INIT_DCS_CMD(0x11), + _INIT_DELAY_CMD(120), + _INIT_DCS_CMD(0x29), + _INIT_DELAY_CMD(120), + {}, +}; + static inline struct boe_panel *to_boe_panel(struct drm_panel *panel) { return container_of(panel, struct boe_panel, base); @@ -444,12 +454,22 @@ static int boe_panel_unprepare(struct drm_panel *panel) } msleep(150); - gpiod_set_value(boe->enable_gpio, 0); - usleep_range(500, 1000); - regulator_disable(boe->avee); - regulator_disable(boe->avdd); - usleep_range(5000, 7000); - regulator_disable(boe->pp1800); + + if (boe->desc->discharge_on_disable) { + regulator_disable(boe->avee); + regulator_disable(boe->avdd); + usleep_range(5000, 7000); + gpiod_set_value(boe->enable_gpio, 0); + usleep_range(5000, 7000); + regulator_disable(boe->pp1800); + } else { + gpiod_set_value(boe->enable_gpio, 0); + usleep_range(500, 1000); + regulator_disable(boe->avee); + regulator_disable(boe->avdd); + usleep_range(5000, 7000); + regulator_disable(boe->pp1800); + } boe->prepared = false; @@ -542,6 +562,35 @@ static const struct panel_desc boe_tv101wum_nl6_desc = { .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE | MIPI_DSI_MODE_LPM, .init_cmds = boe_init_cmd, + .discharge_on_disable = false, +}; + +static const struct drm_display_mode auo_kd101n80_45na_default_mode = { + .clock = 157000, + .hdisplay = 1200, + .hsync_start = 1200 + 80, + .hsync_end = 1200 + 80 + 24, + .htotal = 1200 + 80 + 24 + 36, + .vdisplay = 1920, + .vsync_start = 1920 + 16, + .vsync_end = 1920 + 16 + 4, + .vtotal = 1920 + 16 + 4 + 16, + .vrefresh = 60, +}; + +static const struct panel_desc auo_kd101n80_45na_desc = { + .modes = &auo_kd101n80_45na_default_mode, + .bpc = 8, + .size = { + .width_mm = 135, + .height_mm = 216, + }, + .lanes = 4, + .format = MIPI_DSI_FMT_RGB888, + .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE | + MIPI_DSI_MODE_LPM, + .init_cmds = auo_kd101n80_45na_init_cmd, + .discharge_on_disable = true, }; static int boe_panel_get_modes(struct drm_panel *panel, @@ -673,6 +722,9 @@ static const struct of_device_id boe_of_match[] = { { .compatible = "boe,tv101wum-nl6", .data = &boe_tv101wum_nl6_desc }, + { .compatible = "auo,kd101n80-45na", + .data = &auo_kd101n80_45na_desc + }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, boe_of_match); -- 2.21.0 _______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v9 4/5] drm/panel: support for boe,tv101wum-n53 wuxga dsi video mode panel 2020-01-16 2:15 ` Jitao Shi (?) @ 2020-01-16 2:15 ` Jitao Shi -1 siblings, 0 replies; 27+ messages in thread From: Jitao Shi @ 2020-01-16 2:15 UTC (permalink / raw) To: Thierry Reding, Sam Ravnborg, David Airlie, Daniel Vetter, Matthias Brugger, dri-devel, linux-kernel Cc: linux-mediatek, srv_heupstream, yingjoe.chen, eddie.huang, cawa.cheng, bibby.hsieh, ck.hu, stonea168, Jitao Shi Boe,tv101wum-n53's connector is same as boe,tv101wum-nl6. The most codes can be reuse. So boe,tv101wum-n53 and boe,tv101wum-nl6 use one driver file. Add the different parts in driver data. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> --- .../gpu/drm/panel/panel-boe-tv101wum-nl6.c | 31 +++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c index 2160144ca51b..e77ea577d93a 100644 --- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c +++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c @@ -593,6 +593,34 @@ static const struct panel_desc auo_kd101n80_45na_desc = { .discharge_on_disable = true, }; +static const struct drm_display_mode boe_tv101wum_n53_default_mode = { + .clock = 159916, + .hdisplay = 1200, + .hsync_start = 1200 + 80, + .hsync_end = 1200 + 80 + 24, + .htotal = 1200 + 80 + 24 + 40, + .vdisplay = 1920, + .vsync_start = 1920 + 20, + .vsync_end = 1920 + 20 + 4, + .vtotal = 1920 + 20 + 4 + 10, + .vrefresh = 60, + .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, +}; + +static const struct panel_desc boe_tv101wum_n53_desc = { + .modes = &boe_tv101wum_n53_default_mode, + .bpc = 8, + .size = { + .width_mm = 135, + .height_mm = 216, + }, + .lanes = 4, + .format = MIPI_DSI_FMT_RGB888, + .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE | + MIPI_DSI_MODE_LPM, + .init_cmds = boe_init_cmd, +}; + static int boe_panel_get_modes(struct drm_panel *panel, struct drm_connector *connector) { @@ -725,6 +753,9 @@ static const struct of_device_id boe_of_match[] = { { .compatible = "auo,kd101n80-45na", .data = &auo_kd101n80_45na_desc }, + { .compatible = "boe,tv101wum-n53", + .data = &boe_tv101wum_n53_desc + }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, boe_of_match); -- 2.21.0 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v9 4/5] drm/panel: support for boe, tv101wum-n53 wuxga dsi video mode panel @ 2020-01-16 2:15 ` Jitao Shi 0 siblings, 0 replies; 27+ messages in thread From: Jitao Shi @ 2020-01-16 2:15 UTC (permalink / raw) To: Thierry Reding, Sam Ravnborg, David Airlie, Daniel Vetter, Matthias Brugger, dri-devel, linux-kernel Cc: Jitao Shi, srv_heupstream, stonea168, cawa.cheng, linux-mediatek, yingjoe.chen, eddie.huang Boe,tv101wum-n53's connector is same as boe,tv101wum-nl6. The most codes can be reuse. So boe,tv101wum-n53 and boe,tv101wum-nl6 use one driver file. Add the different parts in driver data. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> --- .../gpu/drm/panel/panel-boe-tv101wum-nl6.c | 31 +++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c index 2160144ca51b..e77ea577d93a 100644 --- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c +++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c @@ -593,6 +593,34 @@ static const struct panel_desc auo_kd101n80_45na_desc = { .discharge_on_disable = true, }; +static const struct drm_display_mode boe_tv101wum_n53_default_mode = { + .clock = 159916, + .hdisplay = 1200, + .hsync_start = 1200 + 80, + .hsync_end = 1200 + 80 + 24, + .htotal = 1200 + 80 + 24 + 40, + .vdisplay = 1920, + .vsync_start = 1920 + 20, + .vsync_end = 1920 + 20 + 4, + .vtotal = 1920 + 20 + 4 + 10, + .vrefresh = 60, + .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, +}; + +static const struct panel_desc boe_tv101wum_n53_desc = { + .modes = &boe_tv101wum_n53_default_mode, + .bpc = 8, + .size = { + .width_mm = 135, + .height_mm = 216, + }, + .lanes = 4, + .format = MIPI_DSI_FMT_RGB888, + .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE | + MIPI_DSI_MODE_LPM, + .init_cmds = boe_init_cmd, +}; + static int boe_panel_get_modes(struct drm_panel *panel, struct drm_connector *connector) { @@ -725,6 +753,9 @@ static const struct of_device_id boe_of_match[] = { { .compatible = "auo,kd101n80-45na", .data = &auo_kd101n80_45na_desc }, + { .compatible = "boe,tv101wum-n53", + .data = &boe_tv101wum_n53_desc + }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, boe_of_match); -- 2.21.0 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v9 4/5] drm/panel: support for boe, tv101wum-n53 wuxga dsi video mode panel @ 2020-01-16 2:15 ` Jitao Shi 0 siblings, 0 replies; 27+ messages in thread From: Jitao Shi @ 2020-01-16 2:15 UTC (permalink / raw) To: Thierry Reding, Sam Ravnborg, David Airlie, Daniel Vetter, Matthias Brugger, dri-devel, linux-kernel Cc: Jitao Shi, srv_heupstream, stonea168, cawa.cheng, linux-mediatek, bibby.hsieh, ck.hu, yingjoe.chen, eddie.huang Boe,tv101wum-n53's connector is same as boe,tv101wum-nl6. The most codes can be reuse. So boe,tv101wum-n53 and boe,tv101wum-nl6 use one driver file. Add the different parts in driver data. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> --- .../gpu/drm/panel/panel-boe-tv101wum-nl6.c | 31 +++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c index 2160144ca51b..e77ea577d93a 100644 --- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c +++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c @@ -593,6 +593,34 @@ static const struct panel_desc auo_kd101n80_45na_desc = { .discharge_on_disable = true, }; +static const struct drm_display_mode boe_tv101wum_n53_default_mode = { + .clock = 159916, + .hdisplay = 1200, + .hsync_start = 1200 + 80, + .hsync_end = 1200 + 80 + 24, + .htotal = 1200 + 80 + 24 + 40, + .vdisplay = 1920, + .vsync_start = 1920 + 20, + .vsync_end = 1920 + 20 + 4, + .vtotal = 1920 + 20 + 4 + 10, + .vrefresh = 60, + .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, +}; + +static const struct panel_desc boe_tv101wum_n53_desc = { + .modes = &boe_tv101wum_n53_default_mode, + .bpc = 8, + .size = { + .width_mm = 135, + .height_mm = 216, + }, + .lanes = 4, + .format = MIPI_DSI_FMT_RGB888, + .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE | + MIPI_DSI_MODE_LPM, + .init_cmds = boe_init_cmd, +}; + static int boe_panel_get_modes(struct drm_panel *panel, struct drm_connector *connector) { @@ -725,6 +753,9 @@ static const struct of_device_id boe_of_match[] = { { .compatible = "auo,kd101n80-45na", .data = &auo_kd101n80_45na_desc }, + { .compatible = "boe,tv101wum-n53", + .data = &boe_tv101wum_n53_desc + }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, boe_of_match); -- 2.21.0 _______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v9 5/5] drm/panel: support for auo,b101uan08.3 wuxga dsi video mode panel 2020-01-16 2:15 ` Jitao Shi (?) @ 2020-01-16 2:15 ` Jitao Shi -1 siblings, 0 replies; 27+ messages in thread From: Jitao Shi @ 2020-01-16 2:15 UTC (permalink / raw) To: Thierry Reding, Sam Ravnborg, David Airlie, Daniel Vetter, Matthias Brugger, dri-devel, linux-kernel Cc: linux-mediatek, srv_heupstream, yingjoe.chen, eddie.huang, cawa.cheng, bibby.hsieh, ck.hu, stonea168, Jitao Shi Auo,auo,b101uan08.3's connector is same as boe,tv101wum-nl6. The most codes can be reuse. So auo,b101uan08.3 and boe,tv101wum-nl6 use one driver file. Add the different parts in driver data. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> --- .../gpu/drm/panel/panel-boe-tv101wum-nl6.c | 78 +++++++++++++++++++ 1 file changed, 78 insertions(+) diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c index e77ea577d93a..01faf8597700 100644 --- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c +++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c @@ -377,6 +377,53 @@ static const struct panel_init_cmd auo_kd101n80_45na_init_cmd[] = { {}, }; +static const struct panel_init_cmd auo_b101uan08_3_init_cmd[] = { + _INIT_DELAY_CMD(24), + _INIT_DCS_CMD(0xB0, 0x01), + _INIT_DCS_CMD(0xC0, 0x48), + _INIT_DCS_CMD(0xC1, 0x48), + _INIT_DCS_CMD(0xC2, 0x47), + _INIT_DCS_CMD(0xC3, 0x47), + _INIT_DCS_CMD(0xC4, 0x46), + _INIT_DCS_CMD(0xC5, 0x46), + _INIT_DCS_CMD(0xC6, 0x45), + _INIT_DCS_CMD(0xC7, 0x45), + _INIT_DCS_CMD(0xC8, 0x64), + _INIT_DCS_CMD(0xC9, 0x64), + _INIT_DCS_CMD(0xCA, 0x4F), + _INIT_DCS_CMD(0xCB, 0x4F), + _INIT_DCS_CMD(0xCC, 0x40), + _INIT_DCS_CMD(0xCD, 0x40), + _INIT_DCS_CMD(0xCE, 0x66), + _INIT_DCS_CMD(0xCF, 0x66), + _INIT_DCS_CMD(0xD0, 0x4F), + _INIT_DCS_CMD(0xD1, 0x4F), + _INIT_DCS_CMD(0xD2, 0x41), + _INIT_DCS_CMD(0xD3, 0x41), + _INIT_DCS_CMD(0xD4, 0x48), + _INIT_DCS_CMD(0xD5, 0x48), + _INIT_DCS_CMD(0xD6, 0x47), + _INIT_DCS_CMD(0xD7, 0x47), + _INIT_DCS_CMD(0xD8, 0x46), + _INIT_DCS_CMD(0xD9, 0x46), + _INIT_DCS_CMD(0xDA, 0x45), + _INIT_DCS_CMD(0xDB, 0x45), + _INIT_DCS_CMD(0xDC, 0x64), + _INIT_DCS_CMD(0xDD, 0x64), + _INIT_DCS_CMD(0xDE, 0x4F), + _INIT_DCS_CMD(0xDF, 0x4F), + _INIT_DCS_CMD(0xE0, 0x40), + _INIT_DCS_CMD(0xE1, 0x40), + _INIT_DCS_CMD(0xE2, 0x66), + _INIT_DCS_CMD(0xE3, 0x66), + _INIT_DCS_CMD(0xE4, 0x4F), + _INIT_DCS_CMD(0xE5, 0x4F), + _INIT_DCS_CMD(0xE6, 0x41), + _INIT_DCS_CMD(0xE7, 0x41), + _INIT_DELAY_CMD(150), + {}, +}; + static inline struct boe_panel *to_boe_panel(struct drm_panel *panel) { return container_of(panel, struct boe_panel, base); @@ -621,6 +668,34 @@ static const struct panel_desc boe_tv101wum_n53_desc = { .init_cmds = boe_init_cmd, }; +static const struct drm_display_mode auo_b101uan08_3_default_mode = { + .clock = 159667, + .hdisplay = 1200, + .hsync_start = 1200 + 60, + .hsync_end = 1200 + 60 + 4, + .htotal = 1200 + 60 + 4 + 80, + .vdisplay = 1920, + .vsync_start = 1920 + 34, + .vsync_end = 1920 + 34 + 2, + .vtotal = 1920 + 34 + 2 + 24, + .vrefresh = 60, + .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, +}; + +static const struct panel_desc auo_b101uan08_3_desc = { + .modes = &auo_b101uan08_3_default_mode, + .bpc = 8, + .size = { + .width_mm = 135, + .height_mm = 216, + }, + .lanes = 4, + .format = MIPI_DSI_FMT_RGB888, + .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE | + MIPI_DSI_MODE_LPM, + .init_cmds = auo_b101uan08_3_init_cmd, +}; + static int boe_panel_get_modes(struct drm_panel *panel, struct drm_connector *connector) { @@ -756,6 +831,9 @@ static const struct of_device_id boe_of_match[] = { { .compatible = "boe,tv101wum-n53", .data = &boe_tv101wum_n53_desc }, + { .compatible = "auo,b101uan08.3", + .data = &auo_b101uan08_3_desc + }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, boe_of_match); -- 2.21.0 ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v9 5/5] drm/panel: support for auo, b101uan08.3 wuxga dsi video mode panel @ 2020-01-16 2:15 ` Jitao Shi 0 siblings, 0 replies; 27+ messages in thread From: Jitao Shi @ 2020-01-16 2:15 UTC (permalink / raw) To: Thierry Reding, Sam Ravnborg, David Airlie, Daniel Vetter, Matthias Brugger, dri-devel, linux-kernel Cc: Jitao Shi, srv_heupstream, stonea168, cawa.cheng, linux-mediatek, yingjoe.chen, eddie.huang Auo,auo,b101uan08.3's connector is same as boe,tv101wum-nl6. The most codes can be reuse. So auo,b101uan08.3 and boe,tv101wum-nl6 use one driver file. Add the different parts in driver data. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> --- .../gpu/drm/panel/panel-boe-tv101wum-nl6.c | 78 +++++++++++++++++++ 1 file changed, 78 insertions(+) diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c index e77ea577d93a..01faf8597700 100644 --- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c +++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c @@ -377,6 +377,53 @@ static const struct panel_init_cmd auo_kd101n80_45na_init_cmd[] = { {}, }; +static const struct panel_init_cmd auo_b101uan08_3_init_cmd[] = { + _INIT_DELAY_CMD(24), + _INIT_DCS_CMD(0xB0, 0x01), + _INIT_DCS_CMD(0xC0, 0x48), + _INIT_DCS_CMD(0xC1, 0x48), + _INIT_DCS_CMD(0xC2, 0x47), + _INIT_DCS_CMD(0xC3, 0x47), + _INIT_DCS_CMD(0xC4, 0x46), + _INIT_DCS_CMD(0xC5, 0x46), + _INIT_DCS_CMD(0xC6, 0x45), + _INIT_DCS_CMD(0xC7, 0x45), + _INIT_DCS_CMD(0xC8, 0x64), + _INIT_DCS_CMD(0xC9, 0x64), + _INIT_DCS_CMD(0xCA, 0x4F), + _INIT_DCS_CMD(0xCB, 0x4F), + _INIT_DCS_CMD(0xCC, 0x40), + _INIT_DCS_CMD(0xCD, 0x40), + _INIT_DCS_CMD(0xCE, 0x66), + _INIT_DCS_CMD(0xCF, 0x66), + _INIT_DCS_CMD(0xD0, 0x4F), + _INIT_DCS_CMD(0xD1, 0x4F), + _INIT_DCS_CMD(0xD2, 0x41), + _INIT_DCS_CMD(0xD3, 0x41), + _INIT_DCS_CMD(0xD4, 0x48), + _INIT_DCS_CMD(0xD5, 0x48), + _INIT_DCS_CMD(0xD6, 0x47), + _INIT_DCS_CMD(0xD7, 0x47), + _INIT_DCS_CMD(0xD8, 0x46), + _INIT_DCS_CMD(0xD9, 0x46), + _INIT_DCS_CMD(0xDA, 0x45), + _INIT_DCS_CMD(0xDB, 0x45), + _INIT_DCS_CMD(0xDC, 0x64), + _INIT_DCS_CMD(0xDD, 0x64), + _INIT_DCS_CMD(0xDE, 0x4F), + _INIT_DCS_CMD(0xDF, 0x4F), + _INIT_DCS_CMD(0xE0, 0x40), + _INIT_DCS_CMD(0xE1, 0x40), + _INIT_DCS_CMD(0xE2, 0x66), + _INIT_DCS_CMD(0xE3, 0x66), + _INIT_DCS_CMD(0xE4, 0x4F), + _INIT_DCS_CMD(0xE5, 0x4F), + _INIT_DCS_CMD(0xE6, 0x41), + _INIT_DCS_CMD(0xE7, 0x41), + _INIT_DELAY_CMD(150), + {}, +}; + static inline struct boe_panel *to_boe_panel(struct drm_panel *panel) { return container_of(panel, struct boe_panel, base); @@ -621,6 +668,34 @@ static const struct panel_desc boe_tv101wum_n53_desc = { .init_cmds = boe_init_cmd, }; +static const struct drm_display_mode auo_b101uan08_3_default_mode = { + .clock = 159667, + .hdisplay = 1200, + .hsync_start = 1200 + 60, + .hsync_end = 1200 + 60 + 4, + .htotal = 1200 + 60 + 4 + 80, + .vdisplay = 1920, + .vsync_start = 1920 + 34, + .vsync_end = 1920 + 34 + 2, + .vtotal = 1920 + 34 + 2 + 24, + .vrefresh = 60, + .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, +}; + +static const struct panel_desc auo_b101uan08_3_desc = { + .modes = &auo_b101uan08_3_default_mode, + .bpc = 8, + .size = { + .width_mm = 135, + .height_mm = 216, + }, + .lanes = 4, + .format = MIPI_DSI_FMT_RGB888, + .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE | + MIPI_DSI_MODE_LPM, + .init_cmds = auo_b101uan08_3_init_cmd, +}; + static int boe_panel_get_modes(struct drm_panel *panel, struct drm_connector *connector) { @@ -756,6 +831,9 @@ static const struct of_device_id boe_of_match[] = { { .compatible = "boe,tv101wum-n53", .data = &boe_tv101wum_n53_desc }, + { .compatible = "auo,b101uan08.3", + .data = &auo_b101uan08_3_desc + }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, boe_of_match); -- 2.21.0 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH v9 5/5] drm/panel: support for auo, b101uan08.3 wuxga dsi video mode panel @ 2020-01-16 2:15 ` Jitao Shi 0 siblings, 0 replies; 27+ messages in thread From: Jitao Shi @ 2020-01-16 2:15 UTC (permalink / raw) To: Thierry Reding, Sam Ravnborg, David Airlie, Daniel Vetter, Matthias Brugger, dri-devel, linux-kernel Cc: Jitao Shi, srv_heupstream, stonea168, cawa.cheng, linux-mediatek, bibby.hsieh, ck.hu, yingjoe.chen, eddie.huang Auo,auo,b101uan08.3's connector is same as boe,tv101wum-nl6. The most codes can be reuse. So auo,b101uan08.3 and boe,tv101wum-nl6 use one driver file. Add the different parts in driver data. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> --- .../gpu/drm/panel/panel-boe-tv101wum-nl6.c | 78 +++++++++++++++++++ 1 file changed, 78 insertions(+) diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c index e77ea577d93a..01faf8597700 100644 --- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c +++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c @@ -377,6 +377,53 @@ static const struct panel_init_cmd auo_kd101n80_45na_init_cmd[] = { {}, }; +static const struct panel_init_cmd auo_b101uan08_3_init_cmd[] = { + _INIT_DELAY_CMD(24), + _INIT_DCS_CMD(0xB0, 0x01), + _INIT_DCS_CMD(0xC0, 0x48), + _INIT_DCS_CMD(0xC1, 0x48), + _INIT_DCS_CMD(0xC2, 0x47), + _INIT_DCS_CMD(0xC3, 0x47), + _INIT_DCS_CMD(0xC4, 0x46), + _INIT_DCS_CMD(0xC5, 0x46), + _INIT_DCS_CMD(0xC6, 0x45), + _INIT_DCS_CMD(0xC7, 0x45), + _INIT_DCS_CMD(0xC8, 0x64), + _INIT_DCS_CMD(0xC9, 0x64), + _INIT_DCS_CMD(0xCA, 0x4F), + _INIT_DCS_CMD(0xCB, 0x4F), + _INIT_DCS_CMD(0xCC, 0x40), + _INIT_DCS_CMD(0xCD, 0x40), + _INIT_DCS_CMD(0xCE, 0x66), + _INIT_DCS_CMD(0xCF, 0x66), + _INIT_DCS_CMD(0xD0, 0x4F), + _INIT_DCS_CMD(0xD1, 0x4F), + _INIT_DCS_CMD(0xD2, 0x41), + _INIT_DCS_CMD(0xD3, 0x41), + _INIT_DCS_CMD(0xD4, 0x48), + _INIT_DCS_CMD(0xD5, 0x48), + _INIT_DCS_CMD(0xD6, 0x47), + _INIT_DCS_CMD(0xD7, 0x47), + _INIT_DCS_CMD(0xD8, 0x46), + _INIT_DCS_CMD(0xD9, 0x46), + _INIT_DCS_CMD(0xDA, 0x45), + _INIT_DCS_CMD(0xDB, 0x45), + _INIT_DCS_CMD(0xDC, 0x64), + _INIT_DCS_CMD(0xDD, 0x64), + _INIT_DCS_CMD(0xDE, 0x4F), + _INIT_DCS_CMD(0xDF, 0x4F), + _INIT_DCS_CMD(0xE0, 0x40), + _INIT_DCS_CMD(0xE1, 0x40), + _INIT_DCS_CMD(0xE2, 0x66), + _INIT_DCS_CMD(0xE3, 0x66), + _INIT_DCS_CMD(0xE4, 0x4F), + _INIT_DCS_CMD(0xE5, 0x4F), + _INIT_DCS_CMD(0xE6, 0x41), + _INIT_DCS_CMD(0xE7, 0x41), + _INIT_DELAY_CMD(150), + {}, +}; + static inline struct boe_panel *to_boe_panel(struct drm_panel *panel) { return container_of(panel, struct boe_panel, base); @@ -621,6 +668,34 @@ static const struct panel_desc boe_tv101wum_n53_desc = { .init_cmds = boe_init_cmd, }; +static const struct drm_display_mode auo_b101uan08_3_default_mode = { + .clock = 159667, + .hdisplay = 1200, + .hsync_start = 1200 + 60, + .hsync_end = 1200 + 60 + 4, + .htotal = 1200 + 60 + 4 + 80, + .vdisplay = 1920, + .vsync_start = 1920 + 34, + .vsync_end = 1920 + 34 + 2, + .vtotal = 1920 + 34 + 2 + 24, + .vrefresh = 60, + .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, +}; + +static const struct panel_desc auo_b101uan08_3_desc = { + .modes = &auo_b101uan08_3_default_mode, + .bpc = 8, + .size = { + .width_mm = 135, + .height_mm = 216, + }, + .lanes = 4, + .format = MIPI_DSI_FMT_RGB888, + .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE | + MIPI_DSI_MODE_LPM, + .init_cmds = auo_b101uan08_3_init_cmd, +}; + static int boe_panel_get_modes(struct drm_panel *panel, struct drm_connector *connector) { @@ -756,6 +831,9 @@ static const struct of_device_id boe_of_match[] = { { .compatible = "boe,tv101wum-n53", .data = &boe_tv101wum_n53_desc }, + { .compatible = "auo,b101uan08.3", + .data = &auo_b101uan08_3_desc + }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, boe_of_match); -- 2.21.0 _______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek ^ permalink raw reply related [flat|nested] 27+ messages in thread
* Re: [PATCH v9 0/5] add driver for "boe, tv101wum-nl6", "boe, tv101wum-n53", "auo, kd101n80-45na" and "auo, b101uan08.3" panels 2020-01-16 2:15 ` Jitao Shi (?) @ 2020-01-17 18:31 ` Sam Ravnborg -1 siblings, 0 replies; 27+ messages in thread From: Sam Ravnborg @ 2020-01-17 18:31 UTC (permalink / raw) To: Jitao Shi Cc: Thierry Reding, David Airlie, Daniel Vetter, Matthias Brugger, dri-devel, linux-kernel, srv_heupstream, stonea168, cawa.cheng, linux-mediatek, yingjoe.chen, eddie.huang Hi Jitao. Thanks for your perseverance on this. With the minor issue on the binding file resolved everything is now fine and patches are all applied to drm-misc-next. Thanks, Sam On Thu, Jan 16, 2020 at 10:15:06AM +0800, Jitao Shi wrote: > Changes since v8: > - merge the panel documents to one. > - delay move the drm_panel_of_backlight after drm_panel_init > > Changes since v7: > - base drm-misc-next branch > - fix document pass dt_binding_check > - remove backlight from panel driver > > Changes since v6: > - fix boe_panel_init err uninit. > - adjust the delay of backlight on. > > Changes since v5: > - covert the documents to yaml > - fine tune boe, tv101wum-n53 panel video timine > > Changes since v4: > - add auo,b101uan08.3 panel for this driver. > - add boe,tv101wum-n53 panel for this driver. > > Changes since v3: > - remove check enable_gpio. > - fine tune the auo,kd101n80-45na panel's power on timing. > > Changes since v2: > - correct the panel size > - remove blank line in Kconfig > - move auo,kd101n80-45na panel driver in this series. > > Changes since v1: > - update typo nl6 -> n16. > - update new panel config and makefile are added in alphabetically order. > - add the panel mode and panel info in driver data. > - merge auo,kd101n80-45a and boe,tv101wum-nl6 in one driver > > Jitao Shi (5): > dt-bindings: display: panel: Add boe tv101wum-n16 panel bindings > drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel > drm/panel: support for auo,kd101n80-45na wuxga dsi video mode panel > drm/panel: support for boe,tv101wum-n53 wuxga dsi video mode panel > drm/panel: support for auo,b101uan08.3 wuxga dsi video mode panel > > .../display/panel/boe,tv101wum-nl6.yaml | 81 ++ > drivers/gpu/drm/panel/Kconfig | 9 + > drivers/gpu/drm/panel/Makefile | 1 + > .../gpu/drm/panel/panel-boe-tv101wum-nl6.c | 854 ++++++++++++++++++ > 4 files changed, 945 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml > create mode 100644 drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c > > -- > 2.21.0 > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v9 0/5] add driver for "boe, tv101wum-nl6", "boe, tv101wum-n53", "auo, kd101n80-45na" and "auo, b101uan08.3" panels @ 2020-01-17 18:31 ` Sam Ravnborg 0 siblings, 0 replies; 27+ messages in thread From: Sam Ravnborg @ 2020-01-17 18:31 UTC (permalink / raw) To: Jitao Shi Cc: srv_heupstream, David Airlie, stonea168, linux-kernel, dri-devel, cawa.cheng, Thierry Reding, linux-mediatek, Matthias Brugger, yingjoe.chen, eddie.huang Hi Jitao. Thanks for your perseverance on this. With the minor issue on the binding file resolved everything is now fine and patches are all applied to drm-misc-next. Thanks, Sam On Thu, Jan 16, 2020 at 10:15:06AM +0800, Jitao Shi wrote: > Changes since v8: > - merge the panel documents to one. > - delay move the drm_panel_of_backlight after drm_panel_init > > Changes since v7: > - base drm-misc-next branch > - fix document pass dt_binding_check > - remove backlight from panel driver > > Changes since v6: > - fix boe_panel_init err uninit. > - adjust the delay of backlight on. > > Changes since v5: > - covert the documents to yaml > - fine tune boe, tv101wum-n53 panel video timine > > Changes since v4: > - add auo,b101uan08.3 panel for this driver. > - add boe,tv101wum-n53 panel for this driver. > > Changes since v3: > - remove check enable_gpio. > - fine tune the auo,kd101n80-45na panel's power on timing. > > Changes since v2: > - correct the panel size > - remove blank line in Kconfig > - move auo,kd101n80-45na panel driver in this series. > > Changes since v1: > - update typo nl6 -> n16. > - update new panel config and makefile are added in alphabetically order. > - add the panel mode and panel info in driver data. > - merge auo,kd101n80-45a and boe,tv101wum-nl6 in one driver > > Jitao Shi (5): > dt-bindings: display: panel: Add boe tv101wum-n16 panel bindings > drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel > drm/panel: support for auo,kd101n80-45na wuxga dsi video mode panel > drm/panel: support for boe,tv101wum-n53 wuxga dsi video mode panel > drm/panel: support for auo,b101uan08.3 wuxga dsi video mode panel > > .../display/panel/boe,tv101wum-nl6.yaml | 81 ++ > drivers/gpu/drm/panel/Kconfig | 9 + > drivers/gpu/drm/panel/Makefile | 1 + > .../gpu/drm/panel/panel-boe-tv101wum-nl6.c | 854 ++++++++++++++++++ > 4 files changed, 945 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml > create mode 100644 drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c > > -- > 2.21.0 > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel ^ permalink raw reply [flat|nested] 27+ messages in thread
* Re: [PATCH v9 0/5] add driver for "boe, tv101wum-nl6", "boe, tv101wum-n53", "auo, kd101n80-45na" and "auo, b101uan08.3" panels @ 2020-01-17 18:31 ` Sam Ravnborg 0 siblings, 0 replies; 27+ messages in thread From: Sam Ravnborg @ 2020-01-17 18:31 UTC (permalink / raw) To: Jitao Shi Cc: srv_heupstream, David Airlie, stonea168, linux-kernel, dri-devel, cawa.cheng, Thierry Reding, linux-mediatek, Daniel Vetter, Matthias Brugger, yingjoe.chen, eddie.huang Hi Jitao. Thanks for your perseverance on this. With the minor issue on the binding file resolved everything is now fine and patches are all applied to drm-misc-next. Thanks, Sam On Thu, Jan 16, 2020 at 10:15:06AM +0800, Jitao Shi wrote: > Changes since v8: > - merge the panel documents to one. > - delay move the drm_panel_of_backlight after drm_panel_init > > Changes since v7: > - base drm-misc-next branch > - fix document pass dt_binding_check > - remove backlight from panel driver > > Changes since v6: > - fix boe_panel_init err uninit. > - adjust the delay of backlight on. > > Changes since v5: > - covert the documents to yaml > - fine tune boe, tv101wum-n53 panel video timine > > Changes since v4: > - add auo,b101uan08.3 panel for this driver. > - add boe,tv101wum-n53 panel for this driver. > > Changes since v3: > - remove check enable_gpio. > - fine tune the auo,kd101n80-45na panel's power on timing. > > Changes since v2: > - correct the panel size > - remove blank line in Kconfig > - move auo,kd101n80-45na panel driver in this series. > > Changes since v1: > - update typo nl6 -> n16. > - update new panel config and makefile are added in alphabetically order. > - add the panel mode and panel info in driver data. > - merge auo,kd101n80-45a and boe,tv101wum-nl6 in one driver > > Jitao Shi (5): > dt-bindings: display: panel: Add boe tv101wum-n16 panel bindings > drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel > drm/panel: support for auo,kd101n80-45na wuxga dsi video mode panel > drm/panel: support for boe,tv101wum-n53 wuxga dsi video mode panel > drm/panel: support for auo,b101uan08.3 wuxga dsi video mode panel > > .../display/panel/boe,tv101wum-nl6.yaml | 81 ++ > drivers/gpu/drm/panel/Kconfig | 9 + > drivers/gpu/drm/panel/Makefile | 1 + > .../gpu/drm/panel/panel-boe-tv101wum-nl6.c | 854 ++++++++++++++++++ > 4 files changed, 945 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.yaml > create mode 100644 drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c > > -- > 2.21.0 > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel _______________________________________________ Linux-mediatek mailing list Linux-mediatek@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-mediatek ^ permalink raw reply [flat|nested] 27+ messages in thread
end of thread, other threads:[~2020-01-17 18:32 UTC | newest] Thread overview: 27+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-01-16 2:15 [PATCH v9 0/5] add driver for "boe, tv101wum-nl6", "boe, tv101wum-n53", "auo, kd101n80-45na" and "auo, b101uan08.3" panels Jitao Shi 2020-01-16 2:15 ` Jitao Shi 2020-01-16 2:15 ` Jitao Shi 2020-01-16 2:15 ` [PATCH v9 1/5] dt-bindings: display: panel: Add boe tv101wum-n16 panel bindings Jitao Shi 2020-01-16 2:15 ` Jitao Shi 2020-01-16 2:15 ` Jitao Shi 2020-01-17 18:08 ` Sam Ravnborg 2020-01-17 18:08 ` Sam Ravnborg 2020-01-17 18:08 ` Sam Ravnborg 2020-01-17 18:30 ` Sam Ravnborg 2020-01-17 18:30 ` Sam Ravnborg 2020-01-17 18:30 ` Sam Ravnborg 2020-01-16 2:15 ` [PATCH v9 2/5] drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel Jitao Shi 2020-01-16 2:15 ` Jitao Shi 2020-01-16 2:15 ` Jitao Shi 2020-01-16 2:15 ` [PATCH v9 3/5] drm/panel: support for auo,kd101n80-45na " Jitao Shi 2020-01-16 2:15 ` [PATCH v9 3/5] drm/panel: support for auo, kd101n80-45na " Jitao Shi 2020-01-16 2:15 ` Jitao Shi 2020-01-16 2:15 ` [PATCH v9 4/5] drm/panel: support for boe,tv101wum-n53 " Jitao Shi 2020-01-16 2:15 ` [PATCH v9 4/5] drm/panel: support for boe, tv101wum-n53 " Jitao Shi 2020-01-16 2:15 ` Jitao Shi 2020-01-16 2:15 ` [PATCH v9 5/5] drm/panel: support for auo,b101uan08.3 " Jitao Shi 2020-01-16 2:15 ` [PATCH v9 5/5] drm/panel: support for auo, b101uan08.3 " Jitao Shi 2020-01-16 2:15 ` Jitao Shi 2020-01-17 18:31 ` [PATCH v9 0/5] add driver for "boe, tv101wum-nl6", "boe, tv101wum-n53", "auo, kd101n80-45na" and "auo, b101uan08.3" panels Sam Ravnborg 2020-01-17 18:31 ` Sam Ravnborg 2020-01-17 18:31 ` Sam Ravnborg
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.